[ 0.000000] microcode: microcode updated early to revision 0x24, date = 2016-04-29 [ 0.000000] Linux version 4.16.0-rc1-drm-intel-qa-ww7-commit-ec41124+ (gfx@bifrost) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5)) #1 SMP Tue Feb 13 10:38:22 CST 2018 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.16.0-rc1-drm-intel-qa-ww7-commit-ec41124+ root=UUID=2a8388ef-fcb0-4ae0-964a-bd124748729c ro quiet drm.debug=0x1e intel_iommu=igfx_off auto panic=1 nmi_watchdog=panic fsck.repair=yes i915.error_capture=yes resume=/dev/sda3 fastboot [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009a602fff] usable [ 0.000000] BIOS-e820: [mem 0x000000009a603000-0x000000009aafdfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009aafe000-0x00000000a227afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a227b000-0x00000000a2335fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a2336000-0x00000000a235afff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000a235b000-0x00000000a2c8afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a2c8b000-0x00000000a2fa1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a2fa2000-0x00000000a2ffefff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000a2fff000-0x00000000a2ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a3800000-0x00000000a7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000355ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ACPI=0xa233d000 ACPI 2.0=0xa233d000 ESRT=0xa2ee7718 SMBIOS=0xf05e0 MPS=0xfc950 [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: /NUC5i5MYBE, BIOS MYBDWi5v.86A.0034.2017.0116.2148 01/16/2017 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x356000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back [ 0.000000] 1 base 0080000000 mask 7FE0000000 write-back [ 0.000000] 2 base 00A0000000 mask 7FFE000000 write-back [ 0.000000] 3 base 00A2000000 mask 7FFF000000 write-back [ 0.000000] 4 base 0100000000 mask 7F00000000 write-back [ 0.000000] 5 base 0200000000 mask 7F00000000 write-back [ 0.000000] 6 base 0300000000 mask 7FC0000000 write-back [ 0.000000] 7 base 0340000000 mask 7FF0000000 write-back [ 0.000000] 8 base 0350000000 mask 7FFC000000 write-back [ 0.000000] 9 base 0354000000 mask 7FFE000000 write-back [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0xa3000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xa3000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fcaf0-0x000fcaff] mapped at [ (ptrval)] [ 0.000000] esrt: Reserving ESRT space from 0x00000000a2ee7718 to 0x00000000a2ee7750. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x31869c000, 0x31869cfff] PGTABLE [ 0.000000] BRK [0x31869d000, 0x31869dfff] PGTABLE [ 0.000000] BRK [0x31869e000, 0x31869efff] PGTABLE [ 0.000000] BRK [0x31869f000, 0x31869ffff] PGTABLE [ 0.000000] BRK [0x3186a0000, 0x3186a0fff] PGTABLE [ 0.000000] BRK [0x3186a1000, 0x3186a1fff] PGTABLE [ 0.000000] BRK [0x3186a2000, 0x3186a2fff] PGTABLE [ 0.000000] BRK [0x3186a3000, 0x3186a3fff] PGTABLE [ 0.000000] BRK [0x3186a4000, 0x3186a4fff] PGTABLE [ 0.000000] BRK [0x3186a5000, 0x3186a5fff] PGTABLE [ 0.000000] Secure boot could not be determined [ 0.000000] RAMDISK: [mem 0x33276000-0x35932fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000A233D000 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 0x00000000A233D098 0000AC (v01 INTEL NUC5i5MY 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000A2352A20 00010C (v05 INTEL NUC5i5MY 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000A233D1D0 01584F (v02 INTEL NUC5i5MY 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000A2C89F80 000040 [ 0.000000] ACPI: APIC 0x00000000A2352B30 000084 (v03 INTEL NUC5i5MY 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000A2352BB8 000044 (v01 INTEL NUC5i5MY 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000A2352C00 00009C (v01 INTEL NUC5i5MY 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000A2352CA0 00003C (v01 INTEL NUC5i5MY 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000A2352CE0 000038 (v01 INTEL NUC5i5MY 01072009 AMI. 0005000B) [ 0.000000] ACPI: SSDT 0x00000000A2352D18 000315 (v01 INTEL NUC5i5MY 00001000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x00000000A2353030 000042 (v01 INTEL NUC5i5MY 00000000 00000000) [ 0.000000] ACPI: LPIT 0x00000000A2353078 000094 (v01 INTEL NUC5i5MY 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000A2353110 000C7D (v02 INTEL NUC5i5MY 00001000 INTL 20120913) [ 0.000000] ACPI: ASF! 0x00000000A2353D90 0000A0 (v32 INTEL NUC5i5MY 00000001 TFSM 000F4240) [ 0.000000] ACPI: TCPA 0x00000000A2353E30 000032 (v02 INTEL NUC5i5MY 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 0x00000000A2353E68 000539 (v02 INTEL NUC5i5MY 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000A23543A8 000B74 (v02 INTEL NUC5i5MY 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000A2354F20 005C05 (v02 INTEL NUC5i5MY 00003000 INTL 20120913) [ 0.000000] ACPI: DMAR 0x00000000A235AB28 0000B0 (v01 INTEL NUC5i5MY 00000001 INTL 00000001) [ 0.000000] ACPI: BGRT 0x00000000A235ABD8 000038 (v01 INTEL NUC5i5MY 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000355ffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x355ffb000-0x355ffffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x0000000355ffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000009a602fff] [ 0.000000] node 0: [mem 0x000000009aafe000-0x00000000a227afff] [ 0.000000] node 0: [mem 0x00000000a2fff000-0x00000000a2ffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000355ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000355ffffff] [ 0.000000] On node 0 totalpages: 3112222 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 26 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10295 pages used for memmap [ 0.000000] DMA32 zone: 658817 pages, LIFO batch:31 [ 0.000000] Normal zone: 38272 pages used for memmap [ 0.000000] Normal zone: 2449408 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 99 pages [ 0.000000] Reserving Intel graphics memory at [mem 0xa4000000-0xa7ffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x0]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x0]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x0]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x0]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x25 (or later) [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9a603000-0x9aafdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xa227b000-0xa2335fff] [ 0.000000] PM: Registered nosave memory: [mem 0xa2336000-0xa235afff] [ 0.000000] PM: Registered nosave memory: [mem 0xa235b000-0xa2c8afff] [ 0.000000] PM: Registered nosave memory: [mem 0xa2c8b000-0xa2fa1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xa2fa2000-0xa2ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xa3000000-0xa37fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xa3800000-0xa7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xa8000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xa8000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 45 pages/cpu @ (ptrval) s146456 r8192 d29672 u524288 [ 0.000000] pcpu-alloc: s146456 r8192 d29672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3063565 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.16.0-rc1-drm-intel-qa-ww7-commit-ec41124+ root=UUID=2a8388ef-fcb0-4ae0-964a-bd124748729c ro quiet drm.debug=0x1e intel_iommu=igfx_off auto panic=1 nmi_watchdog=panic fsck.repair=yes i915.error_capture=yes resume=/dev/sda3 fastboot [ 0.000000] DMAR: Disable GFX device mapping [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 12073172K/12448888K available (12300K kernel code, 1519K rwdata, 4084K rodata, 2340K init, 1168K bss, 375716K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39206 entries in 154 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16640, nr_irqs: 728, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180105 [ 0.000000] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] DMAR: Host address width 39 [ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e [ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.000000] DMAR: RMRR base: 0x000000a2ef7000 end: 0x000000a2f07fff [ 0.000000] DMAR: RMRR base: 0x000000a3800000 end: 0x000000a7ffffff [ 0.000000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.000000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.000000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.000000] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 2294.799 MHz processor [ 0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x211403e99dd, max_idle_ns: 440795219215 ns [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.59 BogoMIPS (lpj=9179196) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.028871] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.028948] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.028989] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.029412] CPU: Physical Processor ID: 0 [ 0.029412] CPU: Processor Core ID: 0 [ 0.029417] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.029418] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.029421] mce: CPU supports 7 MCE banks [ 0.029434] CPU0: Thermal monitoring enabled (TM1) [ 0.029443] process: using mwait in idle threads [ 0.029445] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.029446] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.029447] Spectre V2 : Vulnerable: Minimal generic ASM retpoline [ 0.029786] Freeing SMP alternatives memory: 36K [ 0.032000] smpboot: CPU0: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (family: 0x6, model: 0x3d, stepping: 0x4) [ 0.032000] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.032000] ... version: 3 [ 0.032000] ... bit width: 48 [ 0.032000] ... generic registers: 4 [ 0.032000] ... value mask: 0000ffffffffffff [ 0.032000] ... max period: 00007fffffffffff [ 0.032000] ... fixed-purpose events: 3 [ 0.032000] ... event mask: 000000070000000f [ 0.032000] Hierarchical SRCU implementation. [ 0.032000] smp: Bringing up secondary CPUs ... [ 0.032000] x86: Booting SMP configuration: [ 0.032000] .... node #0, CPUs: #1 [ 0.032000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.032000] #2 #3 [ 0.033383] smp: Brought up 1 node, 4 CPUs [ 0.033383] smpboot: Max logical packages: 1 [ 0.033383] smpboot: Total of 4 processors activated (18358.39 BogoMIPS) [ 0.040049] devtmpfs: initialized [ 0.040160] x86/mm: Memory block size: 128MB [ 0.043389] evm: security.selinux [ 0.043390] evm: security.SMACK64 [ 0.043390] evm: security.SMACK64EXEC [ 0.043390] evm: security.SMACK64TRANSMUTE [ 0.043391] evm: security.SMACK64MMAP [ 0.043391] evm: security.apparmor [ 0.043391] evm: security.ima [ 0.043392] evm: security.capability [ 0.043428] PM: Registering ACPI NVS region [mem 0xa235b000-0xa2c8afff] (9633792 bytes) [ 0.045264] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.045264] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.045264] pinctrl core: initialized pinctrl subsystem [ 0.045264] RTC time: 6:14:13, date: 01/30/18 [ 0.045264] NET: Registered protocol family 16 [ 0.045264] audit: initializing netlink subsys (disabled) [ 0.045264] audit: type=2000 audit(1517292852.044:1): state=initialized audit_enabled=0 res=1 [ 0.045264] cpuidle: using governor ladder [ 0.045264] cpuidle: using governor menu [ 0.045264] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.045264] ACPI: bus type PCI registered [ 0.045264] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.045264] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.045264] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.045264] PCI: Using configuration type 1 for base access [ 0.051197] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.051197] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.052006] ACPI: Added _OSI(Module Device) [ 0.052006] ACPI: Added _OSI(Processor Device) [ 0.052006] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.052006] ACPI: Added _OSI(Processor Aggregator Device) [ 0.054986] ACPI: Executed 18 blocks of module-level executable AML code [ 0.082972] ACPI: Dynamic OEM Table Load: [ 0.082977] ACPI: SSDT 0xFFFF956748A12C00 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.084553] ACPI: Dynamic OEM Table Load: [ 0.084558] ACPI: SSDT 0xFFFF956746240000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.086391] ACPI: Dynamic OEM Table Load: [ 0.086394] ACPI: SSDT 0xFFFF956747C6A400 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.093223] ACPI: Interpreter enabled [ 0.093264] ACPI: (supports S0 S3 S4 S5) [ 0.093265] ACPI: Using IOAPIC for interrupt routing [ 0.093343] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.095557] ACPI: Enabled 7 GPEs in block 00 to 7F [ 0.106095] ACPI: Power Resource [PG00] (on) [ 0.107653] ACPI: Power Resource [PG01] (on) [ 0.109246] ACPI: Power Resource [PG02] (on) [ 0.118090] ACPI: Power Resource [WRST] (off) [ 0.119330] ACPI: Power Resource [WRST] (off) [ 0.120752] ACPI: Power Resource [WRST] (off) [ 0.121960] ACPI: Power Resource [WRST] (off) [ 0.123166] ACPI: Power Resource [WRST] (off) [ 0.124398] ACPI: Power Resource [WRST] (off) [ 0.125622] ACPI: Power Resource [WRST] (off) [ 0.127066] ACPI: Power Resource [WRST] (off) [ 0.163984] ACPI: Power Resource [FN00] (off) [ 0.164299] ACPI: Power Resource [FN01] (off) [ 0.164600] ACPI: Power Resource [FN02] (off) [ 0.164901] ACPI: Power Resource [FN03] (off) [ 0.165199] ACPI: Power Resource [FN04] (off) [ 0.168399] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.168408] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.171148] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.171148] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.173329] PCI host bridge to bus 0000:00 [ 0.173332] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.173334] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.173336] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.173338] pci_bus 0000:00: root bus resource [mem 0xa8000000-0xdfffffff window] [ 0.173340] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfe113fff window] [ 0.173342] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.173353] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.173601] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.173610] pci 0000:00:02.0: reg 0x10: [mem 0xa9000000-0xa9ffffff 64bit] [ 0.173614] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.173618] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.173634] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.173955] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.173962] pci 0000:00:03.0: reg 0x10: [mem 0xaa034000-0xaa037fff 64bit] [ 0.174241] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.174257] pci 0000:00:14.0: reg 0x10: [mem 0xaa020000-0xaa02ffff 64bit] [ 0.174314] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.174565] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.174584] pci 0000:00:16.0: reg 0x10: [mem 0xaa03e000-0xaa03e01f 64bit] [ 0.174650] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.175074] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000 [ 0.175089] pci 0000:00:19.0: reg 0x10: [mem 0xaa000000-0xaa01ffff] [ 0.175095] pci 0000:00:19.0: reg 0x14: [mem 0xaa03b000-0xaa03bfff] [ 0.175101] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 0.175155] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.175405] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 0.175419] pci 0000:00:1b.0: reg 0x10: [mem 0xaa030000-0xaa033fff 64bit] [ 0.175467] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.175813] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 [ 0.175831] pci 0000:00:1d.0: reg 0x10: [mem 0xaa03a000-0xaa03a3ff] [ 0.175914] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.176174] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.176521] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.176534] pci 0000:00:1f.2: reg 0x10: [io 0x30d0-0x30d7] [ 0.176539] pci 0000:00:1f.2: reg 0x14: [io 0x30c0-0x30c3] [ 0.176544] pci 0000:00:1f.2: reg 0x18: [io 0x30b0-0x30b7] [ 0.176549] pci 0000:00:1f.2: reg 0x1c: [io 0x30a0-0x30a3] [ 0.176554] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.176560] pci 0000:00:1f.2: reg 0x24: [mem 0xaa039000-0xaa0397ff] [ 0.176596] pci 0000:00:1f.2: PME# supported from D3hot [ 0.176837] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.176851] pci 0000:00:1f.3: reg 0x10: [mem 0xaa038000-0xaa0380ff 64bit] [ 0.176867] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f] [ 0.186156] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.186386] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.186618] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.186845] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.187070] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.187303] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.187540] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.187776] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.189434] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.189434] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.189434] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.189434] vgaarb: loaded [ 0.189434] SCSI subsystem initialized [ 0.189434] libata version 3.00 loaded. [ 0.189434] ACPI: bus type USB registered [ 0.189434] usbcore: registered new interface driver usbfs [ 0.189434] usbcore: registered new interface driver hub [ 0.189434] usbcore: registered new device driver usb [ 0.248043] pps_core: LinuxPPS API ver. 1 registered [ 0.248044] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.248053] PTP clock support registered [ 0.248101] EDAC MC: Ver: 3.0.0 [ 0.248154] Registered efivars operations [ 0.250656] PCI: Using ACPI for IRQ routing [ 0.252280] PCI: pci_cache_line_size set to 64 bytes [ 0.252306] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.252310] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.252312] e820: reserve RAM buffer [mem 0x9a603000-0x9bffffff] [ 0.252314] e820: reserve RAM buffer [mem 0xa227b000-0xa3ffffff] [ 0.252316] e820: reserve RAM buffer [mem 0xa3000000-0xa3ffffff] [ 0.252318] e820: reserve RAM buffer [mem 0x356000000-0x357ffffff] [ 0.252593] NetLabel: Initializing [ 0.252593] NetLabel: domain hash size = 128 [ 0.252594] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.252632] NetLabel: unlabeled traffic allowed by default [ 0.252668] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.252668] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.252668] clocksource: Switched to clocksource tsc-early [ 0.280152] VFS: Disk quotas dquot_6.6.0 [ 0.280200] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.280498] AppArmor: AppArmor Filesystem Enabled [ 0.280549] pnp: PnP ACPI init [ 0.281057] system 00:00: [io 0x0a00-0x0a0f] has been reserved [ 0.281063] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.281834] pnp 00:01: [dma 0 disabled] [ 0.281924] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.282240] system 00:02: [io 0x0680-0x069f] has been reserved [ 0.282243] system 00:02: [io 0xffff] has been reserved [ 0.282246] system 00:02: [io 0xffff] has been reserved [ 0.282250] system 00:02: [io 0xffff] has been reserved [ 0.282253] system 00:02: [io 0x1800-0x18fe] has been reserved [ 0.282256] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.282261] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.282382] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.282500] system 00:04: [io 0x1854-0x1857] has been reserved [ 0.282505] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.283210] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.283215] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.283218] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.283221] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.283226] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.283229] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.283233] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.283236] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.283239] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.283242] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.283245] system 00:05: [mem 0xa8010000-0xa801ffff] has been reserved [ 0.283249] system 00:05: [mem 0xa8000000-0xa800ffff] has been reserved [ 0.283254] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.284620] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved [ 0.284623] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved [ 0.284629] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.287714] pnp: PnP ACPI: found 7 devices [ 0.295460] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.295619] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.295620] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.295621] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.295622] pci_bus 0000:00: resource 7 [mem 0xa8000000-0xdfffffff window] [ 0.295623] pci_bus 0000:00: resource 8 [mem 0xfe000000-0xfe113fff window] [ 0.295958] NET: Registered protocol family 2 [ 0.296225] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) [ 0.296271] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.296427] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.296534] TCP: Hash tables configured (established 131072 bind 65536) [ 0.296603] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.296645] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.296780] NET: Registered protocol family 1 [ 0.296797] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.323976] PCI: CLS 0 bytes, default 64 [ 0.324067] Trying to unpack rootfs image as initramfs... [ 0.917431] Freeing initrd memory: 39668K [ 0.917506] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.917509] software IO TLB [mem 0x9b69c000-0x9f69c000] (64MB) mapped at [00000000295a429d-00000000fce9a4e4] [ 0.917844] Scanning for low memory corruption every 60 seconds [ 0.919176] Initialise system trusted keyrings [ 0.919193] Key type blacklist registered [ 0.919233] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 0.923202] zbud: loaded [ 0.924253] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.924709] fuse init (API version 7.26) [ 0.925010] Allocating IMA blacklist keyring. [ 0.926102] Key type asymmetric registered [ 0.926103] Asymmetric key parser 'x509' registered [ 0.926191] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.926233] io scheduler noop registered [ 0.926233] io scheduler deadline registered (default) [ 0.926375] io scheduler cfq registered [ 0.926376] io scheduler mq-deadline registered (default) [ 0.926377] io scheduler kyber registered [ 0.926640] efifb: probing for efifb [ 0.926662] efifb: framebuffer at 0xb0000000, using 8128k, total 8128k [ 0.926663] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.926663] efifb: scrolling: redraw [ 0.926664] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.930950] Console: switching to colour frame buffer device 240x67 [ 0.934939] fb0: EFI VGA frame buffer device [ 0.935202] intel_idle: MWAIT substates: 0x11142120 [ 0.935203] intel_idle: v0.4.1 model 0x3D [ 0.935787] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.935976] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.936000] ACPI: Sleep Button [SLPB] [ 0.936089] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.936109] ACPI: Power Button [PWRB] [ 0.936197] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.936212] ACPI: Power Button [PWRF] [ 0.939419] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.939420] ACPI: Thermal Zone [TZ00] (28 C) [ 0.940361] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.940362] ACPI: Thermal Zone [TZ01] (30 C) [ 0.940638] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.961312] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.964116] Linux agpgart interface v0.103 [ 0.964203] drm_mm: Testing DRM range manger (struct drm_mm), with random_seed=0xc5db6d40 max_iterations=8192 max_prime=128 [ 0.964204] drm_mm: igt_sanitycheck - ok! [ 0.964208] igt_debug 0x0000000000000000-0x0000000000000200: 512: free [ 0.964208] igt_debug 0x0000000000000200-0x0000000000000600: 1024: used [ 0.964209] igt_debug 0x0000000000000600-0x0000000000000a00: 1024: free [ 0.964210] igt_debug 0x0000000000000a00-0x0000000000000e00: 1024: used [ 0.964210] igt_debug 0x0000000000000e00-0x0000000000001000: 512: free [ 0.964211] igt_debug total: 4096, used 2048 free 2048 [ 1.952019] tsc: Refined TSC clocksource calibration: 2294.688 MHz [ 1.952023] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21139aef754, max_idle_ns: 440795211890 ns [ 1.990965] clocksource: Switched to clocksource tsc [ 30.654608] brd: module loaded [ 30.658875] loop: module loaded [ 30.659603] libphy: Fixed MDIO Bus: probed [ 30.659603] tun: Universal TUN/TAP device driver, 1.6 [ 30.659704] PPP generic driver version 2.4.2 [ 30.659802] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 30.659807] ehci-pci: EHCI PCI platform driver [ 30.660212] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 30.660224] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 30.660238] ehci-pci 0000:00:1d.0: debug port 2 [ 30.664159] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 30.664188] ehci-pci 0000:00:1d.0: irq 23, io mem 0xaa03a000 [ 30.680058] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 30.680177] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 30.680178] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 30.680179] usb usb1: Product: EHCI Host Controller [ 30.680180] usb usb1: Manufacturer: Linux 4.16.0-rc1-drm-intel-qa-ww7-commit-ec41124+ ehci_hcd [ 30.680181] usb usb1: SerialNumber: 0000:00:1d.0 [ 30.680538] hub 1-0:1.0: USB hub found [ 30.680553] hub 1-0:1.0: 3 ports detected [ 30.681021] ehci-platform: EHCI generic platform driver [ 30.681041] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 30.681048] ohci-pci: OHCI PCI platform driver [ 30.681065] ohci-platform: OHCI generic platform driver [ 30.681077] uhci_hcd: USB Universal Host Controller Interface driver [ 30.681499] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 30.681508] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 30.682587] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810 [ 30.682590] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 30.682819] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 30.682820] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 30.682821] usb usb2: Product: xHCI Host Controller [ 30.682822] usb usb2: Manufacturer: Linux 4.16.0-rc1-drm-intel-qa-ww7-commit-ec41124+ xhci-hcd [ 30.682822] usb usb2: SerialNumber: 0000:00:14.0 [ 30.683129] hub 2-0:1.0: USB hub found [ 30.683149] hub 2-0:1.0: 11 ports detected [ 30.691476] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 30.691485] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 30.691567] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 30.691568] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 30.691569] usb usb3: Product: xHCI Host Controller [ 30.691570] usb usb3: Manufacturer: Linux 4.16.0-rc1-drm-intel-qa-ww7-commit-ec41124+ xhci-hcd [ 30.691570] usb usb3: SerialNumber: 0000:00:14.0 [ 30.691868] hub 3-0:1.0: USB hub found [ 30.691885] hub 3-0:1.0: 4 ports detected [ 30.695324] i8042: PNP: No PS/2 controller found. [ 30.695575] mousedev: PS/2 mouse device common for all mice [ 30.695869] rtc_cmos 00:03: RTC can wake from S4 [ 30.696084] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 30.696120] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 30.696132] i2c /dev entries driver [ 30.696360] device-mapper: uevent: version 1.0.3 [ 30.696499] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 30.696514] intel_pstate: Intel P-state driver initializing [ 30.696795] ledtrig-cpu: registered to indicate activity on CPUs [ 30.696798] EFI Variables Facility v0.08 2004-May-17 [ 30.701207] NET: Registered protocol family 10 [ 30.701652] Segment Routing with IPv6 [ 30.701673] NET: Registered protocol family 17 [ 30.701689] Key type dns_resolver registered [ 30.702107] microcode: sig=0x306d4, pf=0x40, revision=0x24 [ 30.702314] microcode: Microcode Update Driver: v2.2. [ 30.702341] sched_clock: Marking stable (30702295442, 0)->(30788202469, -85907027) [ 30.702625] registered taskstats version 1 [ 30.702626] Loading compiled-in X.509 certificates [ 30.705441] Loaded X.509 cert 'Build time autogenerated kernel key: bc3a6a5c1b760bc1846424c15d142d643b3c66e8' [ 30.705494] zswap: loaded using pool lzo/zbud [ 30.705603] kmemleak: Kernel memory leak detector initialized [ 30.705604] kmemleak: Automatic memory scanning thread started [ 30.709527] Key type big_key registered [ 30.711423] Key type trusted registered [ 30.713375] Key type encrypted registered [ 30.713379] AppArmor: AppArmor sha1 policy hashing enabled [ 30.713382] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 30.713432] evm: HMAC attrs: 0x1 [ 30.714290] Magic number: 2:27:217 [ 30.714365] acpi device:3b: hash matches [ 30.714433] rtc_cmos 00:03: setting system clock to 2018-01-30 06:14:43 UTC (1517292883) [ 30.714522] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 30.714522] EDD information not available. [ 30.718163] Freeing unused kernel memory: 2340K [ 30.718164] Write protecting the kernel read-only data: 18432k [ 30.718615] Freeing unused kernel memory: 2004K [ 30.718650] Freeing unused kernel memory: 12K [ 30.724174] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 30.724174] x86/mm: Checking user space page tables [ 30.729350] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 30.815787] ahci 0000:00:1f.2: version 3.0 [ 30.826457] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl SATA mode [ 30.826460] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 30.829474] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 30.829475] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 30.830936] scsi host0: ahci [ 30.831619] scsi host1: ahci [ 30.831854] ata1: SATA max UDMA/133 abar m2048@0xaa039000 port 0xaa039100 irq 43 [ 30.831855] ata2: DUMMY [ 30.833500] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 30.928690] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 31.013310] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) b8:ae:ed:7b:8a:d4 [ 31.013311] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 31.013349] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 31.014131] [drm:intel_pch_type [i915]] Found WildcatPoint LP PCH [ 31.014160] [drm:intel_power_domains_init [i915]] Allowed DC state mask 00 [ 31.014320] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 31.014682] [drm:i915_driver_load [i915]] ppgtt mode: 3 [ 31.014729] [drm:intel_uc_sanitize_options [i915]] enable_guc=0 (submission:no huc:no) [ 31.014754] [drm:i915_driver_load [i915]] guc_log_level=0 (enabled:no verbosity:-1) [ 31.014827] [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M [ 31.014852] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M [ 31.014885] [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M [ 31.014889] checking generic (b0000000 7f0000) vs hw (b0000000 10000000) [ 31.014890] fb: switching to inteldrmfb from EFI VGA [ 31.014936] Console: switching to colour dummy device 80x25 [ 31.015126] [drm] Replacing VGA console driver [ 31.015217] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K [ 31.015280] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xa2c84018 [ 31.015347] [drm:intel_opregion_setup [i915]] Public ACPI methods supported [ 31.015373] [drm:intel_opregion_setup [i915]] SWSCI supported [ 31.016995] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483 [ 31.017022] [drm:intel_opregion_setup [i915]] ASLE supported [ 31.017047] [drm:intel_opregion_setup [i915]] ASLE extension supported [ 31.017073] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 31.017212] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params [ 31.017216] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 31.017217] [drm] Driver supports precise vblank timestamp query. [ 31.017252] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz [ 31.017284] [drm:intel_bios_init [i915]] VBT signature "$VBT HASWELL ", BDB version 189 [ 31.017314] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 31.017341] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 0 [ 31.018035] [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) [ 31.018064] [drm:intel_bios_init [i915]] Panel type: 14 (VBT) [ 31.018091] [drm:intel_bios_init [i915]] DRRS supported mode is static [ 31.018122] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables: [ 31.018127] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 148500 1920 2008 2053 2200 1080 1083 1089 1125 0x8 0xa [ 31.018152] [drm:intel_bios_init [i915]] VBT initial LVDS value 300 [ 31.018177] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 [ 31.018204] [drm:intel_bios_init [i915]] Found SDVO panel mode in BIOS VBT tables: [ 31.018207] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 31.018231] [drm:intel_bios_init [i915]] DRRS State Enabled:1 [ 31.018255] [drm:intel_bios_init [i915]] Skipping SDVO device mapping [ 31.018279] [drm:intel_bios_init [i915]] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 31.018302] [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0 [ 31.018325] [drm:intel_bios_init [i915]] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 31.018348] [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 3 [ 31.018371] [drm:intel_bios_init [i915]] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 31.018393] [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 3 [ 31.018562] [drm:intel_dsm_detect [i915]] no _DSM method for intel device [ 31.018599] [drm:i915_driver_load [i915]] rawclk rate: 24000 kHz [ 31.018631] [drm:intel_power_well_enable [i915]] enabling always-on [ 31.018659] [drm:intel_power_well_enable [i915]] enabling display [ 31.018664] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 31.019779] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 [ 31.019814] [drm:intel_print_wm_latency [i915]] Primary WM0 latency 20 (2.0 usec) [ 31.019845] [drm:intel_print_wm_latency [i915]] Primary WM1 latency 50 (25.0 usec) [ 31.019873] [drm:intel_print_wm_latency [i915]] Primary WM2 latency 90 (45.0 usec) [ 31.019900] [drm:intel_print_wm_latency [i915]] Primary WM3 latency 130 (65.0 usec) [ 31.019926] [drm:intel_print_wm_latency [i915]] Primary WM4 latency 160 (80.0 usec) [ 31.019952] [drm:intel_print_wm_latency [i915]] Sprite WM0 latency 20 (2.0 usec) [ 31.019978] [drm:intel_print_wm_latency [i915]] Sprite WM1 latency 50 (25.0 usec) [ 31.020005] [drm:intel_print_wm_latency [i915]] Sprite WM2 latency 90 (45.0 usec) [ 31.020035] [drm:intel_print_wm_latency [i915]] Sprite WM3 latency 130 (65.0 usec) [ 31.020058] [drm:intel_print_wm_latency [i915]] Sprite WM4 latency 160 (80.0 usec) [ 31.020081] [drm:intel_print_wm_latency [i915]] Cursor WM0 latency 20 (2.0 usec) [ 31.020103] [drm:intel_print_wm_latency [i915]] Cursor WM1 latency 50 (25.0 usec) [ 31.020126] [drm:intel_print_wm_latency [i915]] Cursor WM2 latency 90 (45.0 usec) [ 31.020148] [drm:intel_print_wm_latency [i915]] Cursor WM3 latency 130 (65.0 usec) [ 31.020170] [drm:intel_print_wm_latency [i915]] Cursor WM4 latency 160 (80.0 usec) [ 31.020207] [drm:intel_modeset_init [i915]] 3 display pipes available. [ 31.020436] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 540000 kHz, VCO 0 kHz, ref 0 kHz, bypass 0 kHz, voltage level 1 [ 31.020468] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 540000 kHz [ 31.020500] [drm:intel_modeset_init [i915]] Max dotclock rate: 540000 kHz [ 31.020841] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port A [ 31.020871] [drm:intel_dp_init_connector [i915]] using AUX A for port A (VBT) [ 31.020906] [drm:intel_pps_dump_state [i915]] cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 6000 [ 31.020930] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 31.020952] [drm:intel_dp_init_panel_power_sequencer [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 [ 31.020973] [drm:intel_dp_init_panel_power_sequencer [i915]] backlight on delay 1, off delay 200 [ 31.021000] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 31.021021] [drm:intel_edp_panel_vdd_sanitize [i915]] VDD left on by BIOS, adjusting state tracking [ 31.024013] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 31.024464] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.027903] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.031340] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.034800] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.038245] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.041683] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.045123] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.048560] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.051993] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.055425] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.058863] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.062299] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.065733] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.069169] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.072604] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.076040] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.079473] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.082906] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.086340] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.089773] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.093209] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.096644] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.100078] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.103512] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.106945] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.110379] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.113812] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.117245] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.120677] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.124110] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.127544] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.130977] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7545010e [ 31.130980] [drm:drm_dp_dpcd_access] Too many retries, giving up. First error: -110 [ 31.130981] [drm] failed to retrieve link info, disabling eDP [ 31.131005] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off [ 31.131031] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 [ 31.131084] [drm:intel_dp_init_connector [i915]] Adding DP connector on port B [ 31.131113] [drm:intel_dp_init_connector [i915]] using AUX B for port B (VBT) [ 31.131206] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B [ 31.131234] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT) [ 31.131284] [drm:intel_dp_init_connector [i915]] Adding DP connector on port C [ 31.131310] [drm:intel_dp_init_connector [i915]] using AUX C for port C (VBT) [ 31.131364] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C [ 31.131389] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT) [ 31.131456] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1 [ 31.131483] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1 [ 31.131509] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1 [ 31.131534] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:37:pipe A] hw state readout: enabled [ 31.131560] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x1 [ 31.131582] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x1 [ 31.131604] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x1 [ 31.131625] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:47:pipe B] hw state readout: enabled [ 31.131646] [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0 [ 31.131666] [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0 [ 31.131686] [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0 [ 31.131706] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe C] hw state readout: disabled [ 31.131726] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0 [ 31.131746] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 31.131765] [drm:intel_modeset_setup_hw_state [i915]] SPLL hw state readout: crtc_mask 0x00000000, on 0 [ 31.131785] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1 [ 31.131804] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 hw state readout: crtc_mask 0x00000003, on 1 [ 31.131823] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1 [ 31.131845] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:58:DDI B] hw state readout: enabled, pipe A [ 31.131864] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:60:DP-MST A] hw state readout: disabled, pipe A [ 31.131884] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:61:DP-MST B] hw state readout: disabled, pipe B [ 31.131903] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:62:DP-MST C] hw state readout: disabled, pipe C [ 31.131923] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:69:DDI C] hw state readout: enabled, pipe B [ 31.131942] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:71:DP-MST A] hw state readout: disabled, pipe A [ 31.131962] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:72:DP-MST B] hw state readout: disabled, pipe B [ 31.131980] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:73:DP-MST C] hw state readout: disabled, pipe C [ 31.132000] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:59:DP-1] hw state readout: enabled [ 31.132035] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:66:HDMI-A-1] hw state readout: disabled [ 31.132053] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:70:DP-2] hw state readout: enabled [ 31.132072] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:75:HDMI-A-2] hw state readout: disabled [ 31.132080] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 00000000c232a375 [ 31.132084] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1200] for CRTC state 00000000e4887e5a [ 31.132111] [drm:intel_dump_pipe_config [i915]] [CRTC:37:pipe A][setup_hw_state] [ 31.132133] [drm:intel_dump_pipe_config [i915]] output_types: DP (0x80) [ 31.132154] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 [ 31.132175] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 3460300, gmch_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 [ 31.132195] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 31.132214] [drm:intel_dump_pipe_config [i915]] requested mode: [ 31.132217] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148499 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 31.132236] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 31.132238] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148499 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 31.132257] [drm:intel_dump_pipe_config [i915]] crtc timings: 148499 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x40 flags: 0x5 [ 31.132276] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080, pixel rate 148499 [ 31.132295] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x07800438, enabled [ 31.132313] [drm:intel_dump_pipe_config [i915]] ips: 1, double wide: 0 [ 31.132332] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 31.132350] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 31.132368] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] disabled, scaler_id = 0 [ 31.132386] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = 0 [ 31.132404] [drm:intel_dump_pipe_config [i915]] [PLANE:34:cursor A] disabled, scaler_id = 0 [ 31.132424] [drm:intel_dump_pipe_config [i915]] [CRTC:47:pipe B][setup_hw_state] [ 31.132442] [drm:intel_dump_pipe_config [i915]] output_types: DP (0x80) [ 31.132459] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0 [ 31.132478] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 3588460, gmch_n: 8388608, link_m: 299038, link_n: 524288, tu: 64 [ 31.132495] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 31.132513] [drm:intel_dump_pipe_config [i915]] requested mode: [ 31.132515] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 153999 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9 [ 31.132532] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 31.132534] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 153999 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9 [ 31.132552] [drm:intel_dump_pipe_config [i915]] crtc timings: 153999 1920 1968 2000 2080 1200 1203 1209 1235, type: 0x40 flags: 0x9 [ 31.132570] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080, pixel rate 153999 [ 31.132588] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x078004b0, enabled [ 31.132606] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 31.132623] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 31.132640] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 31.132658] [drm:intel_dump_pipe_config [i915]] [PLANE:38:primary B] disabled, scaler_id = 0 [ 31.132676] [drm:intel_dump_pipe_config [i915]] [PLANE:41:sprite B] disabled, scaler_id = 0 [ 31.132693] [drm:intel_dump_pipe_config [i915]] [PLANE:44:cursor B] disabled, scaler_id = 0 [ 31.132711] [drm:intel_dump_pipe_config [i915]] [CRTC:57:pipe C][setup_hw_state] [ 31.132729] [drm:intel_dump_pipe_config [i915]] output_types: (0x0) [ 31.132746] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0 [ 31.132764] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 31.132781] [drm:intel_dump_pipe_config [i915]] requested mode: [ 31.132783] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 31.132800] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 31.132802] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 31.132820] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 31.132837] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 31.132855] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 31.132883] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 31.132902] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 31.132928] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 31.132946] [drm:intel_dump_pipe_config [i915]] [PLANE:48:primary C] disabled, scaler_id = 0 [ 31.132963] [drm:intel_dump_pipe_config [i915]] [PLANE:51:sprite C] disabled, scaler_id = 0 [ 31.132981] [drm:intel_dump_pipe_config [i915]] [PLANE:54:cursor C] disabled, scaler_id = 0 [ 31.133002] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 enabled but not in use, disabling [ 31.133022] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 enabled but not in use, disabling [ 31.133053] [drm:i9xx_get_initial_plane_config [i915]] pipe A/primary A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 31.133080] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, gtt_offset=0x0000000000000000, size=0x00000000007e9000 [ 31.133109] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] failed to allocate stolen space [ 31.133133] [drm:intel_plane_disable_noatomic [i915]] pipe A active planes 0x0 [ 31.145862] [drm:i9xx_get_initial_plane_config [i915]] pipe B/primary B with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 31.145899] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, gtt_offset=0x0000000000000000, size=0x00000000007e9000 [ 31.145933] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] failed to allocate stolen space [ 31.145972] [drm:intel_plane_disable_noatomic [i915]] pipe B active planes 0x0 [ 31.145984] [drm:drm_atomic_state_init] Allocated atomic state 000000001ff8cbce [ 31.145990] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] 0000000082b41a8a state to 000000001ff8cbce [ 31.145996] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] 000000005e26e204 state to 000000001ff8cbce [ 31.145999] [drm:drm_atomic_get_crtc_state] Added [CRTC:57:pipe C] 000000007dfc8911 state to 000000001ff8cbce [ 31.146003] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 0000000093bc0beb state to 000000001ff8cbce [ 31.146006] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] 00000000975511b4 state to 000000001ff8cbce [ 31.146009] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] 00000000d0d70b04 state to 000000001ff8cbce [ 31.146012] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] 000000002de61a84 state to 000000001ff8cbce [ 31.146015] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] 000000009b4b7c1e state to 000000001ff8cbce [ 31.146017] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] 00000000b9e851c4 state to 000000001ff8cbce [ 31.146020] [drm:drm_atomic_get_plane_state] Added [PLANE:48:primary C] 00000000f91e6a61 state to 000000001ff8cbce [ 31.146023] [drm:drm_atomic_get_plane_state] Added [PLANE:51:sprite C] 000000006718084c state to 000000001ff8cbce [ 31.146026] [drm:drm_atomic_get_plane_state] Added [PLANE:54:cursor C] 000000009a7c5ead state to 000000001ff8cbce [ 31.146032] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:59:DP-1] 0000000084910c94 state to 000000001ff8cbce [ 31.146036] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:66:HDMI-A-1] 000000006d76c446 state to 000000001ff8cbce [ 31.146038] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:70:DP-2] 00000000dac55b0f state to 000000001ff8cbce [ 31.146041] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:75:HDMI-A-2] 00000000fbdcec06 state to 000000001ff8cbce [ 31.146045] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:59:DP-1] [ 31.146048] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:59:DP-1] keeps [ENCODER:58:DDI B], now on [CRTC:37:pipe A] [ 31.146049] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:66:HDMI-A-1] [ 31.146051] [drm:drm_atomic_helper_check_modeset] Disabling [CONNECTOR:66:HDMI-A-1] [ 31.146053] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:70:DP-2] [ 31.146054] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:70:DP-2] keeps [ENCODER:69:DDI C], now on [CRTC:47:pipe B] [ 31.146056] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:75:HDMI-A-2] [ 31.146057] [drm:drm_atomic_helper_check_modeset] Disabling [CONNECTOR:75:HDMI-A-2] [ 31.146066] [drm:drm_atomic_state_default_clear] Clearing atomic state 000000001ff8cbce [ 31.146074] [drm:__drm_atomic_state_free] Freeing atomic state 000000001ff8cbce [ 31.146313] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [1000, 100000000] [ 31.146381] [drm:i915_gem_contexts_init [i915]] logical context support initialized [ 31.146445] [drm:intel_engine_create_scratch [i915]] rcs0 pipe control offset: 0xfffff000 [ 31.146751] [drm:intel_engine_init_common [i915]] rcs0 hws offset: 0xfffe8000 [ 31.147007] [drm:intel_engine_init_common [i915]] bcs0 hws offset: 0xfffe4000 [ 31.147265] [drm:intel_engine_init_common [i915]] vcs0 hws offset: 0xfffe0000 [ 31.147520] [drm:intel_engine_init_common [i915]] vecs0 hws offset: 0xfffdc000 [ 31.147560] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 11 [ 31.148005] [drm:intel_fbdev_init [i915]] pipe A not active or no fb, skipping [ 31.148048] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping [ 31.148079] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping [ 31.148107] [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config [ 31.149117] [drm:intel_dp_connector_register [i915]] registering DPDDC-B bus for card0-DP-1 [ 31.149513] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-DP-2 [ 31.149801] [drm] Initialized i915 1.6.0 20180207 for 0000:00:02.0 on minor 0 [ 31.150174] [drm:intel_opregion_register [i915]] 4 outputs detected [ 31.153916] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 31.154678] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 31.154881] i915 device info: pciid=0x1616 rev=0x09 platform=BROADWELL gen=8 [ 31.154884] [drm:drm_setup_crtcs] [ 31.154885] i915 device info: is_mobile: no [ 31.154886] i915 device info: is_lp: no [ 31.154887] i915 device info: is_alpha_support: no [ 31.154888] i915 device info: has_64bit_reloc: yes [ 31.154889] i915 device info: has_aliasing_ppgtt: yes [ 31.154890] i915 device info: has_csr: no [ 31.154890] i915 device info: has_ddi: yes [ 31.154891] i915 device info: has_dp_mst: yes [ 31.154892] i915 device info: has_reset_engine: yes [ 31.154895] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:59:DP-1] [ 31.154896] i915 device info: has_fbc: yes [ 31.154942] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1] [ 31.154943] i915 device info: has_fpga_dbg: yes [ 31.154944] i915 device info: has_full_ppgtt: yes [ 31.154945] i915 device info: has_full_48bit_ppgtt: yes [ 31.154945] i915 device info: has_gmch_display: no [ 31.154946] i915 device info: has_guc: no [ 31.154946] i915 device info: has_guc_ct: no [ 31.154947] i915 device info: has_hotplug: yes [ 31.154948] i915 device info: has_l3_dpf: no [ 31.154948] i915 device info: has_llc: yes [ 31.154949] i915 device info: has_logical_ring_contexts: yes [ 31.154950] i915 device info: has_logical_ring_preemption: no [ 31.154950] i915 device info: has_overlay: no [ 31.154951] i915 device info: has_pooled_eu: no [ 31.154952] i915 device info: has_psr: yes [ 31.154952] i915 device info: has_rc6: yes [ 31.154953] i915 device info: has_rc6p: no [ 31.154953] i915 device info: has_resource_streamer: yes [ 31.154954] i915 device info: has_runtime_pm: yes [ 31.154955] i915 device info: has_snoop: no [ 31.154956] i915 device info: unfenced_needs_alignment: no [ 31.154957] i915 device info: cursor_needs_physical: no [ 31.154957] i915 device info: hws_needs_physical: no [ 31.154958] i915 device info: overlay_needs_physical: no [ 31.154959] i915 device info: supports_tv: no [ 31.154960] i915 device info: has_ipc: no [ 31.154961] i915 device info: slice mask: 0001 [ 31.154961] i915 device info: slice total: 1 [ 31.154962] i915 device info: subslice total: 3 [ 31.154963] i915 device info: subslice mask 0007 [ 31.154964] i915 device info: subslice per slice: 3 [ 31.154965] i915 device info: EU total: 24 [ 31.154965] i915 device info: EU per subslice: 8 [ 31.154966] i915 device info: has slice power gating: no [ 31.154967] i915 device info: has subslice power gating: no [ 31.154968] i915 device info: has EU power gating: no [ 31.154969] i915 device info: CS timestamp frequency: 12500 kHz [ 31.155949] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00 [ 31.156823] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.156869] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 31.156895] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 31.156918] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 31.157855] [drm:drm_dp_read_desc] DP sink: OUI 00-e0-4c dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 31.157890] [drm:intel_dp_detect [i915]] Sink is not MST capable [ 31.158255] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 31.158805] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.160013] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.160992] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.161174] ata1.00: ATA-10: INTEL SSDSC2BW120H6, RG20, max UDMA/133 [ 31.161175] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 31.162336] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.163426] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.164516] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.165604] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.166303] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.167173] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.167182] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:59:DP-1] status updated from unknown to connected [ 31.167187] [drm:drm_add_display_info] non_desktop set to 0 [ 31.167202] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 31.167204] [drm:drm_add_display_info] non_desktop set to 0 [ 31.167264] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:59:DP-1] probed modes : [ 31.167266] [drm:drm_mode_debug_printmodeline] Modeline 80:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 31.167268] [drm:drm_mode_debug_printmodeline] Modeline 83:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 [ 31.167269] [drm:drm_mode_debug_printmodeline] Modeline 88:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 31.167271] [drm:drm_mode_debug_printmodeline] Modeline 82:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 31.167272] [drm:drm_mode_debug_printmodeline] Modeline 81:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 31.167274] [drm:drm_mode_debug_printmodeline] Modeline 89:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 31.167275] [drm:drm_mode_debug_printmodeline] Modeline 90:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 31.167277] [drm:drm_mode_debug_printmodeline] Modeline 91:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 31.167278] [drm:drm_mode_debug_printmodeline] Modeline 84:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 31.167280] [drm:drm_mode_debug_printmodeline] Modeline 85:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 31.167281] [drm:drm_mode_debug_printmodeline] Modeline 86:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 31.167282] [drm:drm_mode_debug_printmodeline] Modeline 87:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 31.167284] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:66:HDMI-A-1] [ 31.167314] [drm:intel_hdmi_detect [i915]] [CONNECTOR:66:HDMI-A-1] [ 31.167527] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 31.167555] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 31.167748] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 31.167750] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 31.167773] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 31.167795] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 31.168570] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 31.168598] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 31.168790] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 31.168815] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 31.169002] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 31.169006] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 31.169008] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:66:HDMI-A-1] status updated from unknown to disconnected [ 31.169011] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:66:HDMI-A-1] disconnected [ 31.169013] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-2] [ 31.169041] [drm:intel_dp_detect [i915]] [CONNECTOR:70:DP-2] [ 31.169480] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 84 01 01 00 01 00 02 02 06 05 00 00 00 [ 31.169803] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 31.169830] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 31.169856] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 31.170240] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 31.170273] [drm:intel_dp_detect [i915]] Sink is not MST capable [ 31.174017] ata1.00: configured for UDMA/133 [ 31.174261] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-2] status updated from unknown to connected [ 31.174263] [drm:drm_add_display_info] non_desktop set to 0 [ 31.174270] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 31.174272] [drm:drm_add_display_info] non_desktop set to 0 [ 31.174328] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BW12 RG20 PQ: 0 ANSI: 5 [ 31.174361] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-2] probed modes : [ 31.174365] [drm:drm_mode_debug_printmodeline] Modeline 93:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 31.174368] [drm:drm_mode_debug_printmodeline] Modeline 97:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 31.174370] [drm:drm_mode_debug_printmodeline] Modeline 100:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 31.174371] [drm:drm_mode_debug_printmodeline] Modeline 94:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 31.174373] [drm:drm_mode_debug_printmodeline] Modeline 98:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 [ 31.174374] [drm:drm_mode_debug_printmodeline] Modeline 101:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 31.174376] [drm:drm_mode_debug_printmodeline] Modeline 95:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 31.174378] [drm:drm_mode_debug_printmodeline] Modeline 96:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 [ 31.174380] [drm:drm_mode_debug_printmodeline] Modeline 99:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 31.174382] [drm:drm_mode_debug_printmodeline] Modeline 104:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 31.174385] [drm:drm_mode_debug_printmodeline] Modeline 102:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 31.174387] [drm:drm_mode_debug_printmodeline] Modeline 103:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 31.174389] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:HDMI-A-2] [ 31.174439] [drm:intel_hdmi_detect [i915]] [CONNECTOR:75:HDMI-A-2] [ 31.174650] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 31.174690] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 31.174797] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 31.174810] sd 0:0:0:0: [sda] Write Protect is off [ 31.174811] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 31.174833] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 31.174891] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 31.174892] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 31.174895] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 31.174932] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 31.174959] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 31.175708] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 31.175738] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 31.175928] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 31.175952] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 31.176061] sda: sda1 sda2 sda3 [ 31.176121] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 31.176124] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 31.176126] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:HDMI-A-2] status updated from unknown to disconnected [ 31.176127] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:HDMI-A-2] disconnected [ 31.176130] [drm:drm_setup_crtcs] connector 59 enabled? yes [ 31.176130] [drm:drm_setup_crtcs] connector 66 enabled? no [ 31.176131] [drm:drm_setup_crtcs] connector 70 enabled? yes [ 31.176132] [drm:drm_setup_crtcs] connector 75 enabled? no [ 31.176165] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 31.176168] [drm:drm_setup_crtcs] looking for cmdline mode on connector 59 [ 31.176169] [drm:drm_setup_crtcs] looking for preferred mode on connector 59 0 [ 31.176170] [drm:drm_setup_crtcs] found mode 1920x1080 [ 31.176171] [drm:drm_setup_crtcs] looking for cmdline mode on connector 70 [ 31.176172] [drm:drm_setup_crtcs] looking for preferred mode on connector 70 0 [ 31.176173] [drm:drm_setup_crtcs] found mode 1920x1200 [ 31.176174] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config [ 31.176186] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 37 (0,0) [ 31.176190] [drm:drm_setup_crtcs] desired mode 1920x1200 set on crtc 47 (0,0) [ 31.176221] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one [ 31.176657] sd 0:0:0:0: [sda] Attached SCSI disk [ 31.176961] [drm:intelfb_create [i915]] allocated 1920x1200 fb: 0x00005000 [ 31.177078] fbcon: inteldrmfb (fb0) is primary device [ 31.177247] [drm:drm_atomic_state_init] Allocated atomic state 00000000d108e233 [ 31.177252] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 0000000043353d99 state to 00000000d108e233 [ 31.177256] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] 00000000aa7d29c6 state to 00000000d108e233 [ 31.177257] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000aa7d29c6 to [NOCRTC] [ 31.177258] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000aa7d29c6 [ 31.177262] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] 00000000f0439ac3 state to 00000000d108e233 [ 31.177263] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000f0439ac3 to [NOCRTC] [ 31.177264] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000f0439ac3 [ 31.177267] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] 00000000365e80ac state to 00000000d108e233 [ 31.177269] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] 000000006aea409f state to 00000000d108e233 [ 31.177270] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000006aea409f to [NOCRTC] [ 31.177271] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000006aea409f [ 31.177276] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] 0000000011b4a2cb state to 00000000d108e233 [ 31.177276] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000011b4a2cb to [NOCRTC] [ 31.177277] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000011b4a2cb [ 31.177280] [drm:drm_atomic_get_plane_state] Added [PLANE:48:primary C] 0000000006222949 state to 00000000d108e233 [ 31.177283] [drm:drm_atomic_get_plane_state] Added [PLANE:51:sprite C] 00000000614f01db state to 00000000d108e233 [ 31.177284] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000614f01db to [NOCRTC] [ 31.177285] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000614f01db [ 31.177287] [drm:drm_atomic_get_plane_state] Added [PLANE:54:cursor C] 00000000bb1abba9 state to 00000000d108e233 [ 31.177288] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000bb1abba9 to [NOCRTC] [ 31.177289] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000bb1abba9 [ 31.177294] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] 00000000cd72f2f8 state to 00000000d108e233 [ 31.177298] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 00000000cd72f2f8 [ 31.177299] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000043353d99 to [CRTC:37:pipe A] [ 31.177300] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 0000000043353d99 [ 31.177302] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to 00000000d108e233 [ 31.177308] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:59:DP-1] 00000000f92b563e state to 00000000d108e233 [ 31.177309] [drm:drm_atomic_set_crtc_for_connector] Link connector state 00000000f92b563e to [NOCRTC] [ 31.177310] [drm:drm_atomic_set_crtc_for_connector] Link connector state 00000000f92b563e to [CRTC:37:pipe A] [ 31.177314] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] 000000002a1bf1a3 state to 00000000d108e233 [ 31.177317] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1200] for CRTC state 000000002a1bf1a3 [ 31.177317] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000365e80ac to [CRTC:47:pipe B] [ 31.177318] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 00000000365e80ac [ 31.177319] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to 00000000d108e233 [ 31.177323] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:70:DP-2] 0000000095211373 state to 00000000d108e233 [ 31.177324] [drm:drm_atomic_set_crtc_for_connector] Link connector state 0000000095211373 to [NOCRTC] [ 31.177325] [drm:drm_atomic_set_crtc_for_connector] Link connector state 0000000095211373 to [CRTC:47:pipe B] [ 31.177328] [drm:drm_atomic_get_crtc_state] Added [CRTC:57:pipe C] 000000002250e3b6 state to 00000000d108e233 [ 31.177329] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 000000002250e3b6 [ 31.177330] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000006222949 to [NOCRTC] [ 31.177331] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000006222949 [ 31.177332] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:57:pipe C] to 00000000d108e233 [ 31.177333] [drm:drm_atomic_check_only] checking 00000000d108e233 [ 31.177338] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:59:DP-1] [ 31.177349] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:59:DP-1] keeps [ENCODER:58:DDI B], now on [CRTC:37:pipe A] [ 31.177351] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:70:DP-2] [ 31.177352] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:70:DP-2] keeps [ENCODER:69:DDI C], now on [CRTC:47:pipe B] [ 31.177354] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to 00000000d108e233 [ 31.177395] [drm:intel_atomic_check [i915]] [CONNECTOR:59:DP-1] checking for sink bpp constrains [ 31.177425] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24 [ 31.177458] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 270000 pixel clock 148499KHz [ 31.177486] [drm:intel_dp_compute_config [i915]] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 31.177511] [drm:intel_dp_compute_config [i915]] DP link bw required 445497 available 648000 [ 31.177540] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 31.177569] [drm:intel_dump_pipe_config [i915]] [CRTC:37:pipe A][modeset] [ 31.177594] [drm:intel_dump_pipe_config [i915]] output_types: DP (0x80) [ 31.177617] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 [ 31.177640] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 5767129, gmch_n: 8388608, link_m: 240297, link_n: 262144, tu: 64 [ 31.177662] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 31.177682] [drm:intel_dump_pipe_config [i915]] requested mode: [ 31.177685] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 31.177705] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 31.177707] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148499 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 31.177728] [drm:intel_dump_pipe_config [i915]] crtc timings: 148499 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x40 flags: 0x5 [ 31.177748] [drm:intel_dump_pipe_config [i915]] port clock: 162000, pipe src size: 1920x1080, pixel rate 148499 [ 31.177768] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 31.177788] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 31.177807] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 31.177826] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 31.177846] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] disabled, scaler_id = 0 [ 31.177865] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = 0 [ 31.177884] [drm:intel_dump_pipe_config [i915]] [PLANE:34:cursor A] disabled, scaler_id = 0 [ 31.177886] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to 00000000d108e233 [ 31.177909] [drm:intel_atomic_check [i915]] [CONNECTOR:70:DP-2] checking for sink bpp constrains [ 31.177931] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24 [ 31.177960] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 270000 pixel clock 153999KHz [ 31.177991] [drm:intel_dp_compute_config [i915]] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 31.178015] [drm:intel_dp_compute_config [i915]] DP link bw required 461997 available 648000 [ 31.178041] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 31.178065] [drm:intel_dump_pipe_config [i915]] [CRTC:47:pipe B][modeset] [ 31.178088] [drm:intel_dump_pipe_config [i915]] output_types: DP (0x80) [ 31.178109] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0 [ 31.178129] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 5980727, gmch_n: 8388608, link_m: 249196, link_n: 262144, tu: 64 [ 31.178149] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 31.178169] [drm:intel_dump_pipe_config [i915]] requested mode: [ 31.178171] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 31.178190] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 31.178192] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 153999 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9 [ 31.178212] [drm:intel_dump_pipe_config [i915]] crtc timings: 153999 1920 1968 2000 2080 1200 1203 1209 1235, type: 0x40 flags: 0x9 [ 31.178232] [drm:intel_dump_pipe_config [i915]] port clock: 162000, pipe src size: 1920x1200, pixel rate 153999 [ 31.178251] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 31.178270] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 31.178290] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 31.178308] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 31.178327] [drm:intel_dump_pipe_config [i915]] [PLANE:38:primary B] disabled, scaler_id = 0 [ 31.178346] [drm:intel_dump_pipe_config [i915]] [PLANE:41:sprite B] disabled, scaler_id = 0 [ 31.178365] [drm:intel_dump_pipe_config [i915]] [PLANE:44:cursor B] disabled, scaler_id = 0 [ 31.178389] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 31.178411] [drm:intel_atomic_check [i915]] New voltage level calculated to be logical 2, actual 2 [ 31.178435] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:37:pipe A] has [PLANE:28:primary A] with fb 107 [ 31.178457] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 0 -> 1, off 0, on 1, ms 1 [ 31.178479] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:47:pipe B] has [PLANE:38:primary B] with fb 107 [ 31.178500] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:38:primary B] visible 0 -> 1, off 0, on 1, ms 1 [ 31.178525] [drm:intel_reference_shared_dpll [i915]] using LCPLL 810 for pipe A [ 31.178549] [drm:intel_reference_shared_dpll [i915]] using LCPLL 810 for pipe B [ 31.178552] [drm:drm_atomic_commit] committing 00000000d108e233 [ 31.179143] [drm:intel_disable_pipe [i915]] disabling pipe A [ 31.180368] usb 1-1: New USB device found, idVendor=8087, idProduct=8001 [ 31.180369] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 31.180696] hub 1-1:1.0: USB hub found [ 31.180855] hub 1-1:1.0: 8 ports detected [ 31.196516] [drm:intel_disable_shared_dpll [i915]] disable LCPLL 1350 (active 3, on? 1) for crtc 37 [ 31.196565] [drm:intel_disable_pipe [i915]] disabling pipe B [ 31.199375] [drm:intel_disable_shared_dpll [i915]] disable LCPLL 1350 (active 2, on? 1) for crtc 47 [ 31.199412] [drm:intel_disable_shared_dpll [i915]] disabling LCPLL 1350 [ 31.199452] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 337500 kHz, VCO 0 kHz, ref 0 kHz, bypass 0 kHz, voltage level 2 [ 31.199521] [drm:intel_atomic_commit_tail [i915]] [ENCODER:58:DDI B] [ 31.199552] [drm:intel_atomic_commit_tail [i915]] [ENCODER:60:DP-MST A] [ 31.199581] [drm:intel_atomic_commit_tail [i915]] [ENCODER:61:DP-MST B] [ 31.199607] [drm:intel_atomic_commit_tail [i915]] [ENCODER:62:DP-MST C] [ 31.199632] [drm:intel_atomic_commit_tail [i915]] [ENCODER:69:DDI C] [ 31.199657] [drm:intel_atomic_commit_tail [i915]] [ENCODER:71:DP-MST A] [ 31.199681] [drm:intel_atomic_commit_tail [i915]] [ENCODER:72:DP-MST B] [ 31.199704] [drm:intel_atomic_commit_tail [i915]] [ENCODER:73:DP-MST C] [ 31.199730] [drm:verify_single_dpll_state.isra.115 [i915]] WRPLL 1 [ 31.199757] [drm:verify_single_dpll_state.isra.115 [i915]] WRPLL 2 [ 31.199782] [drm:verify_single_dpll_state.isra.115 [i915]] SPLL [ 31.199806] [drm:verify_single_dpll_state.isra.115 [i915]] LCPLL 810 [ 31.199830] [drm:verify_single_dpll_state.isra.115 [i915]] LCPLL 1350 [ 31.199853] [drm:verify_single_dpll_state.isra.115 [i915]] LCPLL 2700 [ 31.199884] [drm:intel_enable_shared_dpll [i915]] enable LCPLL 810 (active 1, on? 0) for crtc 37 [ 31.199913] [drm:intel_enable_shared_dpll [i915]] enabling LCPLL 810 [ 31.201838] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 31.201862] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 31.201884] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 31.201906] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 31.204390] [drm:intel_dp_start_link_train [i915]] clock recovery OK [ 31.204419] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2 [ 31.207228] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful [ 31.207589] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:59:DP-1] Link Training Passed at Link Rate = 162000, Lane count = 4 [ 31.208232] [drm:intel_enable_pipe [i915]] enabling pipe A [ 31.208269] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 31.208304] [drm:intel_fbc_enable [i915]] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1 [ 31.208333] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 31.208368] [drm:intel_enable_shared_dpll [i915]] enable LCPLL 810 (active 3, on? 1) for crtc 47 [ 31.209464] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 31.209487] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 31.209509] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 31.209529] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 31.210169] [drm:intel_dp_start_link_train [i915]] clock recovery OK [ 31.210190] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2 [ 31.211129] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful [ 31.211482] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:70:DP-2] Link Training Passed at Link Rate = 162000, Lane count = 4 [ 31.211837] [drm:intel_enable_pipe [i915]] enabling pipe B [ 31.211865] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 31.228686] [drm:verify_connector_state.isra.114 [i915]] [CONNECTOR:59:DP-1] [ 31.228731] [drm:intel_atomic_commit_tail [i915]] [CRTC:37:pipe A] [ 31.228774] [drm:verify_single_dpll_state.isra.115 [i915]] LCPLL 810 [ 31.228807] [drm:verify_connector_state.isra.114 [i915]] [CONNECTOR:70:DP-2] [ 31.228842] [drm:intel_atomic_commit_tail [i915]] [CRTC:47:pipe B] [ 31.228877] [drm:verify_single_dpll_state.isra.115 [i915]] LCPLL 810 [ 31.228887] [drm:drm_atomic_state_default_clear] Clearing atomic state 00000000d108e233 [ 31.228902] [drm:__drm_atomic_state_free] Freeing atomic state 00000000d108e233 [ 31.228911] Console: switching to colour frame buffer device 240x67 [ 31.228946] [drm:drm_atomic_state_init] Allocated atomic state 00000000ab6b5fba [ 31.228951] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 000000001e0e56d7 state to 00000000ab6b5fba [ 31.228955] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] 0000000071127416 state to 00000000ab6b5fba [ 31.228958] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] 000000008e8e7250 state to 00000000ab6b5fba [ 31.228960] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000008e8e7250 to [NOCRTC] [ 31.228961] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000008e8e7250 [ 31.228963] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] 0000000089e7c031 state to 00000000ab6b5fba [ 31.228964] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000089e7c031 to [NOCRTC] [ 31.228965] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000089e7c031 [ 31.228968] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] 000000007730d4bb state to 00000000ab6b5fba [ 31.228971] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] 00000000e11d3814 state to 00000000ab6b5fba [ 31.228974] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] 000000001a3dcc39 state to 00000000ab6b5fba [ 31.228975] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000001a3dcc39 to [NOCRTC] [ 31.228975] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000001a3dcc39 [ 31.228978] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] 0000000075527c2f state to 00000000ab6b5fba [ 31.228979] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000075527c2f to [NOCRTC] [ 31.228980] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000075527c2f [ 31.228983] [drm:drm_atomic_get_plane_state] Added [PLANE:48:primary C] 00000000afdf8576 state to 00000000ab6b5fba [ 31.228986] [drm:drm_atomic_get_plane_state] Added [PLANE:51:sprite C] 00000000b5da5de6 state to 00000000ab6b5fba [ 31.228987] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000b5da5de6 to [NOCRTC] [ 31.228987] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000b5da5de6 [ 31.228990] [drm:drm_atomic_get_plane_state] Added [PLANE:54:cursor C] 00000000421d4f2b state to 00000000ab6b5fba [ 31.228991] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000421d4f2b to [NOCRTC] [ 31.228992] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000421d4f2b [ 31.228997] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 0000000071127416 [ 31.228998] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000001e0e56d7 to [CRTC:37:pipe A] [ 31.229000] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 000000001e0e56d7 [ 31.229001] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to 00000000ab6b5fba [ 31.229008] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:59:DP-1] 0000000042b06b05 state to 00000000ab6b5fba [ 31.229010] [drm:drm_atomic_set_crtc_for_connector] Link connector state 0000000042b06b05 to [NOCRTC] [ 31.229011] [drm:drm_atomic_set_crtc_for_connector] Link connector state 0000000042b06b05 to [CRTC:37:pipe A] [ 31.229015] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1200] for CRTC state 00000000e11d3814 [ 31.229016] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000007730d4bb to [CRTC:47:pipe B] [ 31.229016] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 000000007730d4bb [ 31.229018] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to 00000000ab6b5fba [ 31.229021] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:70:DP-2] 000000005340efda state to 00000000ab6b5fba [ 31.229022] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000005340efda to [NOCRTC] [ 31.229023] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000005340efda to [CRTC:47:pipe B] [ 31.229028] [drm:drm_atomic_get_crtc_state] Added [CRTC:57:pipe C] 00000000adadcd2c state to 00000000ab6b5fba [ 31.229029] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 00000000adadcd2c [ 31.229030] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000afdf8576 to [NOCRTC] [ 31.229031] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000afdf8576 [ 31.229032] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:57:pipe C] to 00000000ab6b5fba [ 31.229033] [drm:drm_atomic_check_only] checking 00000000ab6b5fba [ 31.229038] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:59:DP-1] [ 31.229040] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:59:DP-1] keeps [ENCODER:58:DDI B], now on [CRTC:37:pipe A] [ 31.229042] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:70:DP-2] [ 31.229044] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:70:DP-2] keeps [ENCODER:69:DDI C], now on [CRTC:47:pipe B] [ 31.229082] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:37:pipe A] has [PLANE:28:primary A] with fb 107 [ 31.229113] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 31.229144] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:47:pipe B] has [PLANE:38:primary B] with fb 107 [ 31.229173] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:38:primary B] visible 1 -> 1, off 0, on 0, ms 0 [ 31.229177] [drm:drm_atomic_commit] committing 00000000ab6b5fba [ 31.245327] [drm:drm_atomic_state_default_clear] Clearing atomic state 00000000ab6b5fba [ 31.245339] [drm:__drm_atomic_state_free] Freeing atomic state 00000000ab6b5fba [ 31.249427] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 31.272053] [drm:drm_fb_helper_hotplug_event.part.33] [ 31.272055] [drm:drm_setup_crtcs] [ 31.272071] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:59:DP-1] [ 31.272115] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1] [ 31.273497] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00 [ 31.274426] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 31.274458] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 31.274488] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 31.275742] [drm:drm_dp_read_desc] DP sink: OUI 00-e0-4c dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 31.275776] [drm:intel_dp_detect [i915]] Sink is not MST capable [ 31.277874] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.279623] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.281762] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.284875] [drm:drm_add_display_info] non_desktop set to 0 [ 31.284896] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 31.284897] [drm:drm_add_display_info] non_desktop set to 0 [ 31.284967] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:59:DP-1] probed modes : [ 31.284969] [drm:drm_mode_debug_printmodeline] Modeline 80:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 31.284971] [drm:drm_mode_debug_printmodeline] Modeline 83:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 [ 31.284982] [drm:drm_mode_debug_printmodeline] Modeline 88:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 31.284984] [drm:drm_mode_debug_printmodeline] Modeline 82:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 31.284985] [drm:drm_mode_debug_printmodeline] Modeline 81:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 31.284987] [drm:drm_mode_debug_printmodeline] Modeline 89:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 31.284989] [drm:drm_mode_debug_printmodeline] Modeline 90:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 31.284990] [drm:drm_mode_debug_printmodeline] Modeline 91:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 31.284992] [drm:drm_mode_debug_printmodeline] Modeline 84:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 31.284993] [drm:drm_mode_debug_printmodeline] Modeline 85:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 31.284995] [drm:drm_mode_debug_printmodeline] Modeline 86:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 31.284996] [drm:drm_mode_debug_printmodeline] Modeline 87:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 31.284998] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:66:HDMI-A-1] [ 31.285025] [drm:intel_hdmi_detect [i915]] [CONNECTOR:66:HDMI-A-1] [ 31.285204] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 31.285222] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 31.285385] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.285408] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 31.285410] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 31.285426] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 31.285443] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 31.286173] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 31.286192] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 31.286372] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 31.286391] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 31.286546] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.286572] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 31.286575] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 31.286577] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:66:HDMI-A-1] disconnected [ 31.286580] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-2] [ 31.286601] [drm:intel_dp_detect [i915]] [CONNECTOR:70:DP-2] [ 31.287028] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 84 01 01 00 01 00 02 02 06 05 00 00 00 [ 31.287335] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.287361] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 31.287379] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 31.287396] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 31.287792] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.287803] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 31.287821] [drm:intel_dp_detect [i915]] Sink is not MST capable [ 31.288447] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.291840] [drm:drm_add_display_info] non_desktop set to 0 [ 31.291850] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 31.291852] [drm:drm_add_display_info] non_desktop set to 0 [ 31.291927] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-2] probed modes : [ 31.291929] [drm:drm_mode_debug_printmodeline] Modeline 93:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 31.291931] [drm:drm_mode_debug_printmodeline] Modeline 97:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 31.291933] [drm:drm_mode_debug_printmodeline] Modeline 100:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 31.291935] [drm:drm_mode_debug_printmodeline] Modeline 94:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 31.291936] [drm:drm_mode_debug_printmodeline] Modeline 98:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 [ 31.291938] [drm:drm_mode_debug_printmodeline] Modeline 101:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 31.291939] [drm:drm_mode_debug_printmodeline] Modeline 95:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 31.291941] [drm:drm_mode_debug_printmodeline] Modeline 96:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 [ 31.291943] [drm:drm_mode_debug_printmodeline] Modeline 99:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 31.291944] [drm:drm_mode_debug_printmodeline] Modeline 104:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 31.291946] [drm:drm_mode_debug_printmodeline] Modeline 102:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 31.291947] [drm:drm_mode_debug_printmodeline] Modeline 103:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 31.291949] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:HDMI-A-2] [ 31.291975] [drm:intel_hdmi_detect [i915]] [CONNECTOR:75:HDMI-A-2] [ 31.292160] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 31.292178] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 31.292333] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.292357] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 31.292359] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 31.292376] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 31.292394] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 31.293090] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 31.293120] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 31.293297] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 31.293315] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 31.293489] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 31.293492] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 31.293494] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:HDMI-A-2] disconnected [ 31.293496] [drm:drm_setup_crtcs] connector 59 enabled? yes [ 31.293497] [drm:drm_setup_crtcs] connector 66 enabled? no [ 31.293498] [drm:drm_setup_crtcs] connector 70 enabled? yes [ 31.293499] [drm:drm_setup_crtcs] connector 75 enabled? no [ 31.293528] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 31.293531] [drm:drm_setup_crtcs] looking for cmdline mode on connector 59 [ 31.293532] [drm:drm_setup_crtcs] looking for preferred mode on connector 59 0 [ 31.293533] [drm:drm_setup_crtcs] found mode 1920x1080 [ 31.293534] [drm:drm_setup_crtcs] looking for cmdline mode on connector 70 [ 31.293535] [drm:drm_setup_crtcs] looking for preferred mode on connector 70 0 [ 31.293536] [drm:drm_setup_crtcs] found mode 1920x1200 [ 31.293537] [drm:drm_setup_crtcs] picking CRTCs for 1920x1200 config [ 31.293550] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 37 (0,0) [ 31.293553] [drm:drm_setup_crtcs] desired mode 1920x1200 set on crtc 47 (0,0) [ 31.293566] [drm:drm_atomic_state_init] Allocated atomic state 0000000006309f3e [ 31.293571] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 00000000d331103f state to 0000000006309f3e [ 31.293576] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] 000000009a31e9e4 state to 0000000006309f3e [ 31.293579] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] 000000008872c9ea state to 0000000006309f3e [ 31.293580] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000008872c9ea to [NOCRTC] [ 31.293581] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000008872c9ea [ 31.293584] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] 000000006a33f8aa state to 0000000006309f3e [ 31.293585] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000006a33f8aa to [NOCRTC] [ 31.293585] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000006a33f8aa [ 31.293588] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] 0000000005165cd0 state to 0000000006309f3e [ 31.293590] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] 0000000013855249 state to 0000000006309f3e [ 31.293593] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] 0000000071240bc1 state to 0000000006309f3e [ 31.293594] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000071240bc1 to [NOCRTC] [ 31.293595] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000071240bc1 [ 31.293597] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] 000000006e5610cb state to 0000000006309f3e [ 31.293598] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000006e5610cb to [NOCRTC] [ 31.293599] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000006e5610cb [ 31.293601] [drm:drm_atomic_get_plane_state] Added [PLANE:48:primary C] 00000000b562e294 state to 0000000006309f3e [ 31.293603] [drm:drm_atomic_get_plane_state] Added [PLANE:51:sprite C] 00000000d0046231 state to 0000000006309f3e [ 31.293604] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000d0046231 to [NOCRTC] [ 31.293605] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000d0046231 [ 31.293607] [drm:drm_atomic_get_plane_state] Added [PLANE:54:cursor C] 00000000fadc63cf state to 0000000006309f3e [ 31.293608] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000fadc63cf to [NOCRTC] [ 31.293609] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000fadc63cf [ 31.293613] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 000000009a31e9e4 [ 31.293614] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000d331103f to [CRTC:37:pipe A] [ 31.293615] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 00000000d331103f [ 31.293617] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to 0000000006309f3e [ 31.293625] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:59:DP-1] 000000007d07083b state to 0000000006309f3e [ 31.293627] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000007d07083b to [NOCRTC] [ 31.293628] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000007d07083b to [CRTC:37:pipe A] [ 31.293631] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1200] for CRTC state 0000000013855249 [ 31.293632] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000005165cd0 to [CRTC:47:pipe B] [ 31.293633] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 0000000005165cd0 [ 31.293634] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to 0000000006309f3e [ 31.293637] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:70:DP-2] 0000000053eb1f1a state to 0000000006309f3e [ 31.293638] [drm:drm_atomic_set_crtc_for_connector] Link connector state 0000000053eb1f1a to [NOCRTC] [ 31.293640] [drm:drm_atomic_set_crtc_for_connector] Link connector state 0000000053eb1f1a to [CRTC:47:pipe B] [ 31.293643] [drm:drm_atomic_get_crtc_state] Added [CRTC:57:pipe C] 000000003a8374ae state to 0000000006309f3e [ 31.293644] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 000000003a8374ae [ 31.293645] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000b562e294 to [NOCRTC] [ 31.293646] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000b562e294 [ 31.293647] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:57:pipe C] to 0000000006309f3e [ 31.293648] [drm:drm_atomic_check_only] checking 0000000006309f3e [ 31.293652] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:59:DP-1] [ 31.293655] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:59:DP-1] keeps [ENCODER:58:DDI B], now on [CRTC:37:pipe A] [ 31.293656] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:70:DP-2] [ 31.293658] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:70:DP-2] keeps [ENCODER:69:DDI C], now on [CRTC:47:pipe B] [ 31.293687] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:37:pipe A] has [PLANE:28:primary A] with fb 107 [ 31.293712] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 31.293738] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:47:pipe B] has [PLANE:38:primary B] with fb 107 [ 31.293763] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:38:primary B] visible 1 -> 1, off 0, on 0, ms 0 [ 31.293768] [drm:drm_atomic_commit] committing 0000000006309f3e [ 31.308285] [drm:drm_atomic_state_default_clear] Clearing atomic state 0000000006309f3e [ 31.308302] [drm:__drm_atomic_state_free] Freeing atomic state 0000000006309f3e [ 31.308344] [drm:drm_fb_helper_hotplug_event.part.33] [ 31.308345] [drm:drm_setup_crtcs] [ 31.308356] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:59:DP-1] [ 31.308399] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1] [ 31.309415] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00 [ 31.310313] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 31.310343] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 31.310371] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 31.311319] [drm:drm_dp_read_desc] DP sink: OUI 00-e0-4c dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 31.311360] [drm:intel_dp_detect [i915]] Sink is not MST capable [ 31.317843] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.319463] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.320462] [drm:drm_add_display_info] non_desktop set to 0 [ 31.320482] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 31.320483] [drm:drm_add_display_info] non_desktop set to 0 [ 31.320551] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:59:DP-1] probed modes : [ 31.320553] [drm:drm_mode_debug_printmodeline] Modeline 80:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 31.320555] [drm:drm_mode_debug_printmodeline] Modeline 83:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 [ 31.320556] [drm:drm_mode_debug_printmodeline] Modeline 88:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 31.320558] [drm:drm_mode_debug_printmodeline] Modeline 82:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 31.320559] [drm:drm_mode_debug_printmodeline] Modeline 81:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 31.320561] [drm:drm_mode_debug_printmodeline] Modeline 89:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 31.320562] [drm:drm_mode_debug_printmodeline] Modeline 90:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 31.320564] [drm:drm_mode_debug_printmodeline] Modeline 91:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 31.320565] [drm:drm_mode_debug_printmodeline] Modeline 84:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 31.320567] [drm:drm_mode_debug_printmodeline] Modeline 85:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 31.320568] [drm:drm_mode_debug_printmodeline] Modeline 86:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 31.320570] [drm:drm_mode_debug_printmodeline] Modeline 87:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 31.320571] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:66:HDMI-A-1] [ 31.320596] [drm:intel_hdmi_detect [i915]] [CONNECTOR:66:HDMI-A-1] [ 31.320782] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 31.320801] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 31.320963] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.320988] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 31.320990] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 31.321008] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 31.321026] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 31.321777] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 31.321804] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 31.321999] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 31.322027] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 31.322220] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 31.322224] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 31.322227] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:66:HDMI-A-1] disconnected [ 31.322230] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-2] [ 31.322262] [drm:intel_dp_detect [i915]] [CONNECTOR:70:DP-2] [ 31.322706] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 84 01 01 00 01 00 02 02 06 05 00 00 00 [ 31.323019] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 31.323038] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 31.323057] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 31.323443] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 31.323464] [drm:intel_dp_detect [i915]] Sink is not MST capable [ 31.323813] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.324383] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.324813] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.325925] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 31.327248] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.327951] [drm:drm_add_display_info] non_desktop set to 0 [ 31.327963] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 31.327965] [drm:drm_add_display_info] non_desktop set to 0 [ 31.328111] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-2] probed modes : [ 31.328115] [drm:drm_mode_debug_printmodeline] Modeline 93:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 31.328118] [drm:drm_mode_debug_printmodeline] Modeline 97:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 31.328120] [drm:drm_mode_debug_printmodeline] Modeline 100:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 31.328123] [drm:drm_mode_debug_printmodeline] Modeline 94:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 31.328125] [drm:drm_mode_debug_printmodeline] Modeline 98:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 [ 31.328128] [drm:drm_mode_debug_printmodeline] Modeline 101:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 31.328130] [drm:drm_mode_debug_printmodeline] Modeline 95:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 31.328132] [drm:drm_mode_debug_printmodeline] Modeline 96:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 [ 31.328135] [drm:drm_mode_debug_printmodeline] Modeline 99:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 31.328138] [drm:drm_mode_debug_printmodeline] Modeline 104:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 31.328140] [drm:drm_mode_debug_printmodeline] Modeline 102:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 31.328143] [drm:drm_mode_debug_printmodeline] Modeline 103:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 31.328145] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:HDMI-A-2] [ 31.328189] [drm:intel_hdmi_detect [i915]] [CONNECTOR:75:HDMI-A-2] [ 31.328391] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 31.328420] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 31.328606] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 31.328608] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 31.328628] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 31.328646] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 31.329397] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 31.329423] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 31.329618] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 31.329641] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 31.329798] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 31.329824] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 31.329827] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 31.329829] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:HDMI-A-2] disconnected [ 31.329831] [drm:drm_setup_crtcs] connector 59 enabled? yes [ 31.329832] [drm:drm_setup_crtcs] connector 66 enabled? no [ 31.329833] [drm:drm_setup_crtcs] connector 70 enabled? yes [ 31.329834] [drm:drm_setup_crtcs] connector 75 enabled? no [ 31.329860] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 31.329863] [drm:drm_setup_crtcs] looking for cmdline mode on connector 59 [ 31.329864] [drm:drm_setup_crtcs] looking for preferred mode on connector 59 0 [ 31.329865] [drm:drm_setup_crtcs] found mode 1920x1080 [ 31.329866] [drm:drm_setup_crtcs] looking for cmdline mode on connector 70 [ 31.329867] [drm:drm_setup_crtcs] looking for preferred mode on connector 70 0 [ 31.329868] [drm:drm_setup_crtcs] found mode 1920x1200 [ 31.329869] [drm:drm_setup_crtcs] picking CRTCs for 1920x1200 config [ 31.329882] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 37 (0,0) [ 31.329884] [drm:drm_setup_crtcs] desired mode 1920x1200 set on crtc 47 (0,0) [ 31.329899] [drm:drm_atomic_state_init] Allocated atomic state 000000005fe3287c [ 31.329902] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 00000000779e5abb state to 000000005fe3287c [ 31.329907] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] 00000000134843f7 state to 000000005fe3287c [ 31.329910] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] 00000000d3026b8e state to 000000005fe3287c [ 31.329911] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000d3026b8e to [NOCRTC] [ 31.329912] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000d3026b8e [ 31.329915] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] 0000000028db6f18 state to 000000005fe3287c [ 31.329915] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000028db6f18 to [NOCRTC] [ 31.329916] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000028db6f18 [ 31.329919] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] 00000000a9163318 state to 000000005fe3287c [ 31.329921] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] 0000000039616be4 state to 000000005fe3287c [ 31.329924] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] 000000001d249caa state to 000000005fe3287c [ 31.329925] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000001d249caa to [NOCRTC] [ 31.329926] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000001d249caa [ 31.329928] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] 00000000b186f4c9 state to 000000005fe3287c [ 31.329929] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000b186f4c9 to [NOCRTC] [ 31.329930] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000b186f4c9 [ 31.329932] [drm:drm_atomic_get_plane_state] Added [PLANE:48:primary C] 00000000c271cf22 state to 000000005fe3287c [ 31.329934] [drm:drm_atomic_get_plane_state] Added [PLANE:51:sprite C] 0000000062c35062 state to 000000005fe3287c [ 31.329935] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000062c35062 to [NOCRTC] [ 31.329936] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000062c35062 [ 31.329938] [drm:drm_atomic_get_plane_state] Added [PLANE:54:cursor C] 0000000033561958 state to 000000005fe3287c [ 31.329939] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000033561958 to [NOCRTC] [ 31.329940] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000033561958 [ 31.329944] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 00000000134843f7 [ 31.329945] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000779e5abb to [CRTC:37:pipe A] [ 31.329946] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 00000000779e5abb [ 31.329947] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to 000000005fe3287c [ 31.329952] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:59:DP-1] 000000002ca0efce state to 000000005fe3287c [ 31.329953] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000002ca0efce to [NOCRTC] [ 31.329955] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000002ca0efce to [CRTC:37:pipe A] [ 31.329959] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1200] for CRTC state 0000000039616be4 [ 31.329960] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000a9163318 to [CRTC:47:pipe B] [ 31.329961] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 00000000a9163318 [ 31.329962] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to 000000005fe3287c [ 31.329964] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:70:DP-2] 00000000c4dfa4b8 state to 000000005fe3287c [ 31.329965] [drm:drm_atomic_set_crtc_for_connector] Link connector state 00000000c4dfa4b8 to [NOCRTC] [ 31.329966] [drm:drm_atomic_set_crtc_for_connector] Link connector state 00000000c4dfa4b8 to [CRTC:47:pipe B] [ 31.329969] [drm:drm_atomic_get_crtc_state] Added [CRTC:57:pipe C] 00000000a6d3af8c state to 000000005fe3287c [ 31.329970] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 00000000a6d3af8c [ 31.329971] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000c271cf22 to [NOCRTC] [ 31.329972] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000c271cf22 [ 31.329973] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:57:pipe C] to 000000005fe3287c [ 31.329974] [drm:drm_atomic_check_only] checking 000000005fe3287c [ 31.329978] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:59:DP-1] [ 31.329980] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:59:DP-1] keeps [ENCODER:58:DDI B], now on [CRTC:37:pipe A] [ 31.329981] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:70:DP-2] [ 31.329983] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:70:DP-2] keeps [ENCODER:69:DDI C], now on [CRTC:47:pipe B] [ 31.330008] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:37:pipe A] has [PLANE:28:primary A] with fb 107 [ 31.330028] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 31.330047] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:47:pipe B] has [PLANE:38:primary B] with fb 107 [ 31.330065] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:38:primary B] visible 1 -> 1, off 0, on 0, ms 0 [ 31.330069] [drm:drm_atomic_commit] committing 000000005fe3287c [ 31.345379] [drm:drm_atomic_state_default_clear] Clearing atomic state 000000005fe3287c [ 31.345392] [drm:__drm_atomic_state_free] Freeing atomic state 000000005fe3287c [ 31.434832] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 31.452129] systemd[1]: Detected architecture x86-64. [ 31.452398] systemd[1]: Set hostname to . [ 31.525450] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 31.525590] systemd[1]: Listening on udev Kernel Socket. [ 31.525647] systemd[1]: Listening on udev Control Socket. [ 31.525692] systemd[1]: Listening on Syslog Socket. [ 31.525746] systemd[1]: Listening on Journal Socket. [ 31.525761] systemd[1]: Reached target Remote File Systems. [ 31.525998] systemd[1]: Created slice User and Session Slice. [ 31.560365] lp: driver loaded but no devices found [ 31.566213] ppdev: user-space parallel port driver [ 31.690706] EXT4-fs (sda2): re-mounted. Opts: (null) [ 31.703934] systemd-journald[241]: Received request to flush runtime journal from PID 1 [ 32.014698] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 32.014699] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 32.014700] RAPL PMU: hw unit of domain package 2^-14 Joules [ 32.014701] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 32.014701] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 32.022272] cryptd: max_cpu_qlen set to 1000 [ 32.042118] AVX2 version of gcm_enc/dec engaged. [ 32.042120] AES CTR mode by8 optimization enabled [ 32.102502] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 32.103231] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 32.103432] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 32.136370] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 32.136409] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 32.136442] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 32.136475] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 32.136503] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 32.136531] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 32.136559] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 32.136586] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 32.136612] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 32.141670] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp [ 32.141673] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 32.141675] snd_hda_codec_realtek hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 32.141676] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 32.141677] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 32.141679] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19 [ 32.143761] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input4 [ 32.144076] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input5 [ 32.145785] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6 [ 32.146162] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7 [ 32.146692] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8 [ 32.189954] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 32.190131] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 [ 32.206066] intel_rapl: Found RAPL domain package [ 32.206067] intel_rapl: Found RAPL domain core [ 32.206068] intel_rapl: Found RAPL domain uncore [ 32.206069] intel_rapl: Found RAPL domain dram [ 32.285493] [drm:drm_atomic_state_init] Allocated atomic state 00000000e5e2e23c [ 32.285500] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 0000000084a1e372 state to 00000000e5e2e23c [ 32.285508] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] 0000000021457ee7 state to 00000000e5e2e23c [ 32.285514] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] 000000006ed2739e state to 00000000e5e2e23c [ 32.285516] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000006ed2739e to [NOCRTC] [ 32.285518] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000006ed2739e [ 32.285524] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] 0000000016aa8f1a state to 00000000e5e2e23c [ 32.285526] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000016aa8f1a to [NOCRTC] [ 32.285527] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000016aa8f1a [ 32.285532] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] 000000007d015230 state to 00000000e5e2e23c [ 32.285537] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] 00000000b8953d1e state to 00000000e5e2e23c [ 32.285542] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] 00000000e5a1df59 state to 00000000e5e2e23c [ 32.285543] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000e5a1df59 to [NOCRTC] [ 32.285544] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000e5a1df59 [ 32.285550] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] 00000000ea393b43 state to 00000000e5e2e23c [ 32.285551] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000ea393b43 to [NOCRTC] [ 32.285552] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000ea393b43 [ 32.285557] [drm:drm_atomic_get_plane_state] Added [PLANE:48:primary C] 00000000768d9fb1 state to 00000000e5e2e23c [ 32.285561] [drm:drm_atomic_get_plane_state] Added [PLANE:51:sprite C] 00000000ca45122e state to 00000000e5e2e23c [ 32.285562] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000ca45122e to [NOCRTC] [ 32.285563] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000ca45122e [ 32.285568] [drm:drm_atomic_get_plane_state] Added [PLANE:54:cursor C] 00000000308a3c2b state to 00000000e5e2e23c [ 32.285569] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000308a3c2b to [NOCRTC] [ 32.285570] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000308a3c2b [ 32.285579] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 0000000021457ee7 [ 32.285581] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000084a1e372 to [CRTC:37:pipe A] [ 32.285583] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 0000000084a1e372 [ 32.285585] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to 00000000e5e2e23c [ 32.285595] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:59:DP-1] 00000000afbd464b state to 00000000e5e2e23c [ 32.285597] [drm:drm_atomic_set_crtc_for_connector] Link connector state 00000000afbd464b to [NOCRTC] [ 32.285598] [drm:drm_atomic_set_crtc_for_connector] Link connector state 00000000afbd464b to [CRTC:37:pipe A] [ 32.285604] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1200] for CRTC state 00000000b8953d1e [ 32.285605] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000007d015230 to [CRTC:47:pipe B] [ 32.285607] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 000000007d015230 [ 32.285608] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to 00000000e5e2e23c [ 32.285613] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:70:DP-2] 0000000060e6418d state to 00000000e5e2e23c [ 32.285615] [drm:drm_atomic_set_crtc_for_connector] Link connector state 0000000060e6418d to [NOCRTC] [ 32.285617] [drm:drm_atomic_set_crtc_for_connector] Link connector state 0000000060e6418d to [CRTC:47:pipe B] [ 32.285702] [drm:drm_atomic_get_crtc_state] Added [CRTC:57:pipe C] 00000000c9c6fc60 state to 00000000e5e2e23c [ 32.285704] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 00000000c9c6fc60 [ 32.285706] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000768d9fb1 to [NOCRTC] [ 32.285707] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000768d9fb1 [ 32.285715] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:57:pipe C] to 00000000e5e2e23c [ 32.285717] [drm:drm_atomic_check_only] checking 00000000e5e2e23c [ 32.285725] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:59:DP-1] [ 32.285728] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:59:DP-1] keeps [ENCODER:58:DDI B], now on [CRTC:37:pipe A] [ 32.285730] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:70:DP-2] [ 32.285733] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:70:DP-2] keeps [ENCODER:69:DDI C], now on [CRTC:47:pipe B] [ 32.285772] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:37:pipe A] has [PLANE:28:primary A] with fb 107 [ 32.285800] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 32.285832] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:47:pipe B] has [PLANE:38:primary B] with fb 107 [ 32.285862] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:38:primary B] visible 1 -> 1, off 0, on 0, ms 0 [ 32.285870] [drm:drm_atomic_commit] committing 00000000e5e2e23c [ 32.296490] [drm:drm_atomic_state_default_clear] Clearing atomic state 00000000e5e2e23c [ 32.296519] [drm:__drm_atomic_state_free] Freeing atomic state 00000000e5e2e23c [ 32.312980] [drm:drm_atomic_state_init] Allocated atomic state 000000006412a219 [ 32.312988] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 000000007512e0c7 state to 000000006412a219 [ 32.312995] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] 0000000004c235c1 state to 000000006412a219 [ 32.313000] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] 000000009548ee8f state to 000000006412a219 [ 32.313002] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000009548ee8f to [NOCRTC] [ 32.313003] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000009548ee8f [ 32.313008] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] 0000000010099c11 state to 000000006412a219 [ 32.313009] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000010099c11 to [NOCRTC] [ 32.313010] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000010099c11 [ 32.313017] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] 00000000a9163318 state to 000000006412a219 [ 32.313023] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] 00000000e52ab8f9 state to 000000006412a219 [ 32.313028] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] 0000000028db6f18 state to 000000006412a219 [ 32.313029] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000028db6f18 to [NOCRTC] [ 32.313030] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000028db6f18 [ 32.313036] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] 00000000d3026b8e state to 000000006412a219 [ 32.313037] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000d3026b8e to [NOCRTC] [ 32.313038] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000d3026b8e [ 32.313042] [drm:drm_atomic_get_plane_state] Added [PLANE:48:primary C] 00000000779e5abb state to 000000006412a219 [ 32.313048] [drm:drm_atomic_get_plane_state] Added [PLANE:51:sprite C] 0000000033561958 state to 000000006412a219 [ 32.313050] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000033561958 to [NOCRTC] [ 32.313051] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000033561958 [ 32.313056] [drm:drm_atomic_get_plane_state] Added [PLANE:54:cursor C] 0000000062c35062 state to 000000006412a219 [ 32.313057] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000062c35062 to [NOCRTC] [ 32.313058] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000062c35062 [ 32.313064] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 0000000004c235c1 [ 32.313066] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000007512e0c7 to [CRTC:37:pipe A] [ 32.313068] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 000000007512e0c7 [ 32.313070] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to 000000006412a219 [ 32.313079] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:59:DP-1] 000000005d2c3124 state to 000000006412a219 [ 32.313081] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000005d2c3124 to [NOCRTC] [ 32.313083] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000005d2c3124 to [CRTC:37:pipe A] [ 32.313089] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1200] for CRTC state 00000000e52ab8f9 [ 32.313090] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000a9163318 to [CRTC:47:pipe B] [ 32.313092] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 00000000a9163318 [ 32.313093] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to 000000006412a219 [ 32.313099] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:70:DP-2] 00000000fbdcec06 state to 000000006412a219 [ 32.313100] [drm:drm_atomic_set_crtc_for_connector] Link connector state 00000000fbdcec06 to [NOCRTC] [ 32.313102] [drm:drm_atomic_set_crtc_for_connector] Link connector state 00000000fbdcec06 to [CRTC:47:pipe B] [ 32.313107] [drm:drm_atomic_get_crtc_state] Added [CRTC:57:pipe C] 0000000088119a73 state to 000000006412a219 [ 32.313108] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 0000000088119a73 [ 32.313109] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000779e5abb to [NOCRTC] [ 32.313110] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000779e5abb [ 32.313112] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:57:pipe C] to 000000006412a219 [ 32.313114] [drm:drm_atomic_check_only] checking 000000006412a219 [ 32.313120] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:59:DP-1] [ 32.313122] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:59:DP-1] keeps [ENCODER:58:DDI B], now on [CRTC:37:pipe A] [ 32.313124] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:70:DP-2] [ 32.313127] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:70:DP-2] keeps [ENCODER:69:DDI C], now on [CRTC:47:pipe B] [ 32.313172] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:37:pipe A] has [PLANE:28:primary A] with fb 107 [ 32.313203] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 32.313232] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:47:pipe B] has [PLANE:38:primary B] with fb 107 [ 32.313259] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:38:primary B] visible 1 -> 1, off 0, on 0, ms 0 [ 32.313267] [drm:drm_atomic_commit] committing 000000006412a219 [ 32.329791] [drm:drm_atomic_state_default_clear] Clearing atomic state 000000006412a219 [ 32.329818] [drm:__drm_atomic_state_free] Freeing atomic state 000000006412a219 [ 32.355108] [drm:drm_atomic_state_init] Allocated atomic state 0000000052a99e45 [ 32.355117] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 000000007fe093e0 state to 0000000052a99e45 [ 32.355126] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] 00000000d10dee61 state to 0000000052a99e45 [ 32.355132] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] 00000000e5a1df59 state to 0000000052a99e45 [ 32.355134] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000e5a1df59 to [NOCRTC] [ 32.355135] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000e5a1df59 [ 32.355140] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] 000000007d015230 state to 0000000052a99e45 [ 32.355141] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000007d015230 to [NOCRTC] [ 32.355142] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000007d015230 [ 32.355146] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] 0000000016aa8f1a state to 0000000052a99e45 [ 32.355152] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] 00000000b769cd37 state to 0000000052a99e45 [ 32.355158] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] 00000000308a3c2b state to 0000000052a99e45 [ 32.355159] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000308a3c2b to [NOCRTC] [ 32.355160] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000308a3c2b [ 32.355166] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] 00000000ff074680 state to 0000000052a99e45 [ 32.355167] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000ff074680 to [NOCRTC] [ 32.355168] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000ff074680 [ 32.355173] [drm:drm_atomic_get_plane_state] Added [PLANE:48:primary C] 00000000ca45122e state to 0000000052a99e45 [ 32.355177] [drm:drm_atomic_get_plane_state] Added [PLANE:51:sprite C] 00000000768d9fb1 state to 0000000052a99e45 [ 32.355178] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000768d9fb1 to [NOCRTC] [ 32.355179] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000768d9fb1 [ 32.355184] [drm:drm_atomic_get_plane_state] Added [PLANE:54:cursor C] 00000000ea393b43 state to 0000000052a99e45 [ 32.355185] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000ea393b43 to [NOCRTC] [ 32.355186] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000ea393b43 [ 32.355194] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 00000000d10dee61 [ 32.355195] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000007fe093e0 to [CRTC:37:pipe A] [ 32.355197] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 000000007fe093e0 [ 32.355199] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to 0000000052a99e45 [ 32.355209] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:59:DP-1] 000000009e285cd1 state to 0000000052a99e45 [ 32.355211] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000009e285cd1 to [NOCRTC] [ 32.355213] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000009e285cd1 to [CRTC:37:pipe A] [ 32.355219] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1200] for CRTC state 00000000b769cd37 [ 32.355220] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000016aa8f1a to [CRTC:47:pipe B] [ 32.355222] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 0000000016aa8f1a [ 32.355223] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to 0000000052a99e45 [ 32.355228] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:70:DP-2] 000000009f591222 state to 0000000052a99e45 [ 32.355229] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000009f591222 to [NOCRTC] [ 32.355231] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000009f591222 to [CRTC:47:pipe B] [ 32.355236] [drm:drm_atomic_get_crtc_state] Added [CRTC:57:pipe C] 00000000220f9b6d state to 0000000052a99e45 [ 32.355238] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 00000000220f9b6d [ 32.355239] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000ca45122e to [NOCRTC] [ 32.355240] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000ca45122e [ 32.355242] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:57:pipe C] to 0000000052a99e45 [ 32.355244] [drm:drm_atomic_check_only] checking 0000000052a99e45 [ 32.355249] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:59:DP-1] [ 32.355252] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:59:DP-1] keeps [ENCODER:58:DDI B], now on [CRTC:37:pipe A] [ 32.355254] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:70:DP-2] [ 32.355256] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:70:DP-2] keeps [ENCODER:69:DDI C], now on [CRTC:47:pipe B] [ 32.355300] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:37:pipe A] has [PLANE:28:primary A] with fb 107 [ 32.355333] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 32.355365] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:47:pipe B] has [PLANE:38:primary B] with fb 107 [ 32.355394] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:38:primary B] visible 1 -> 1, off 0, on 0, ms 0 [ 32.355401] [drm:drm_atomic_commit] committing 0000000052a99e45 [ 32.362991] [drm:drm_atomic_state_default_clear] Clearing atomic state 0000000052a99e45 [ 32.363022] [drm:__drm_atomic_state_free] Freeing atomic state 0000000052a99e45 [ 32.370472] [drm:drm_atomic_state_init] Allocated atomic state 00000000e45faa28 [ 32.370483] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 0000000046ee6af0 state to 00000000e45faa28 [ 32.370492] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] 000000001200ee80 state to 00000000e45faa28 [ 32.370497] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] 000000001dbd3b56 state to 00000000e45faa28 [ 32.370499] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000001dbd3b56 to [NOCRTC] [ 32.370500] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000001dbd3b56 [ 32.370505] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] 00000000b09e1e84 state to 00000000e45faa28 [ 32.370507] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000b09e1e84 to [NOCRTC] [ 32.370508] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000b09e1e84 [ 32.370515] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] 000000006ed2739e state to 00000000e45faa28 [ 32.370520] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] 00000000a4d16e24 state to 00000000e45faa28 [ 32.370526] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] 0000000084a1e372 state to 00000000e45faa28 [ 32.370527] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000084a1e372 to [NOCRTC] [ 32.370528] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000084a1e372 [ 32.370532] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] 0000000015998296 state to 00000000e45faa28 [ 32.370533] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000015998296 to [NOCRTC] [ 32.370534] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000015998296 [ 32.370539] [drm:drm_atomic_get_plane_state] Added [PLANE:48:primary C] 0000000085e0c7e7 state to 00000000e45faa28 [ 32.370544] [drm:drm_atomic_get_plane_state] Added [PLANE:51:sprite C] 000000009fd81601 state to 00000000e45faa28 [ 32.370545] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000009fd81601 to [NOCRTC] [ 32.370546] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000009fd81601 [ 32.370552] [drm:drm_atomic_get_plane_state] Added [PLANE:54:cursor C] 000000007bbe6405 state to 00000000e45faa28 [ 32.370554] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000007bbe6405 to [NOCRTC] [ 32.370555] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000007bbe6405 [ 32.370562] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 000000001200ee80 [ 32.370564] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000046ee6af0 to [CRTC:37:pipe A] [ 32.370565] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 0000000046ee6af0 [ 32.370567] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to 00000000e45faa28 [ 32.370577] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:59:DP-1] 000000007a0cecc5 state to 00000000e45faa28 [ 32.370579] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000007a0cecc5 to [NOCRTC] [ 32.370581] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000007a0cecc5 to [CRTC:37:pipe A] [ 32.370587] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1200] for CRTC state 00000000a4d16e24 [ 32.370589] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000006ed2739e to [CRTC:47:pipe B] [ 32.370590] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 000000006ed2739e [ 32.370592] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to 00000000e45faa28 [ 32.370597] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:70:DP-2] 000000006a33cf9b state to 00000000e45faa28 [ 32.370598] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000006a33cf9b to [NOCRTC] [ 32.370600] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000006a33cf9b to [CRTC:47:pipe B] [ 32.370605] [drm:drm_atomic_get_crtc_state] Added [CRTC:57:pipe C] 00000000cf4a60e5 state to 00000000e45faa28 [ 32.370606] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 00000000cf4a60e5 [ 32.370608] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000085e0c7e7 to [NOCRTC] [ 32.370609] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000085e0c7e7 [ 32.370611] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:57:pipe C] to 00000000e45faa28 [ 32.370612] [drm:drm_atomic_check_only] checking 00000000e45faa28 [ 32.370621] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:59:DP-1] [ 32.370624] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:59:DP-1] keeps [ENCODER:58:DDI B], now on [CRTC:37:pipe A] [ 32.370626] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:70:DP-2] [ 32.370628] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:70:DP-2] keeps [ENCODER:69:DDI C], now on [CRTC:47:pipe B] [ 32.370675] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:37:pipe A] has [PLANE:28:primary A] with fb 107 [ 32.370710] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 32.370744] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:47:pipe B] has [PLANE:38:primary B] with fb 107 [ 32.370775] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:38:primary B] visible 1 -> 1, off 0, on 0, ms 0 [ 32.370782] [drm:drm_atomic_commit] committing 00000000e45faa28 [ 32.379574] [drm:drm_atomic_state_default_clear] Clearing atomic state 00000000e45faa28 [ 32.379600] [drm:__drm_atomic_state_free] Freeing atomic state 00000000e45faa28 [ 32.406799] [drm:drm_atomic_state_init] Allocated atomic state 000000002fb76196 [ 32.406809] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 000000000cb2e655 state to 000000002fb76196 [ 32.406817] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] 00000000427eb231 state to 000000002fb76196 [ 32.406822] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] 00000000e0e13f5c state to 000000002fb76196 [ 32.406824] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000e0e13f5c to [NOCRTC] [ 32.406826] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000e0e13f5c [ 32.406832] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] 00000000cc951e0b state to 000000002fb76196 [ 32.406833] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000cc951e0b to [NOCRTC] [ 32.406834] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000cc951e0b [ 32.406839] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] 000000000e82e5a9 state to 000000002fb76196 [ 32.406845] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] 00000000d0f67707 state to 000000002fb76196 [ 32.406852] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] 0000000019844d42 state to 000000002fb76196 [ 32.406853] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000019844d42 to [NOCRTC] [ 32.406854] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000019844d42 [ 32.406859] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] 000000009d2cde70 state to 000000002fb76196 [ 32.406860] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000009d2cde70 to [NOCRTC] [ 32.406862] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000009d2cde70 [ 32.406866] [drm:drm_atomic_get_plane_state] Added [PLANE:48:primary C] 00000000e018dc92 state to 000000002fb76196 [ 32.406871] [drm:drm_atomic_get_plane_state] Added [PLANE:51:sprite C] 000000007759c192 state to 000000002fb76196 [ 32.406872] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000007759c192 to [NOCRTC] [ 32.406873] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000007759c192 [ 32.406878] [drm:drm_atomic_get_plane_state] Added [PLANE:54:cursor C] 0000000027737410 state to 000000002fb76196 [ 32.406879] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000027737410 to [NOCRTC] [ 32.406880] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000027737410 [ 32.406889] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 00000000427eb231 [ 32.406890] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000000cb2e655 to [CRTC:37:pipe A] [ 32.406892] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 000000000cb2e655 [ 32.406894] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to 000000002fb76196 [ 32.406902] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:59:DP-1] 00000000da6368c1 state to 000000002fb76196 [ 32.406905] [drm:drm_atomic_set_crtc_for_connector] Link connector state 00000000da6368c1 to [NOCRTC] [ 32.406906] [drm:drm_atomic_set_crtc_for_connector] Link connector state 00000000da6368c1 to [CRTC:37:pipe A] [ 32.406912] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1200] for CRTC state 00000000d0f67707 [ 32.406913] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000000e82e5a9 to [CRTC:47:pipe B] [ 32.406914] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 000000000e82e5a9 [ 32.406916] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to 000000002fb76196 [ 32.406921] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:70:DP-2] 000000008084e070 state to 000000002fb76196 [ 32.406922] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000008084e070 to [NOCRTC] [ 32.406924] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000008084e070 to [CRTC:47:pipe B] [ 32.406930] [drm:drm_atomic_get_crtc_state] Added [CRTC:57:pipe C] 00000000bfc666b4 state to 000000002fb76196 [ 32.406931] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 00000000bfc666b4 [ 32.406932] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000e018dc92 to [NOCRTC] [ 32.406933] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000e018dc92 [ 32.406935] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:57:pipe C] to 000000002fb76196 [ 32.406937] [drm:drm_atomic_check_only] checking 000000002fb76196 [ 32.406944] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:59:DP-1] [ 32.406947] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:59:DP-1] keeps [ENCODER:58:DDI B], now on [CRTC:37:pipe A] [ 32.406949] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:70:DP-2] [ 32.406952] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:70:DP-2] keeps [ENCODER:69:DDI C], now on [CRTC:47:pipe B] [ 32.406998] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:37:pipe A] has [PLANE:28:primary A] with fb 107 [ 32.407034] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 32.407069] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:47:pipe B] has [PLANE:38:primary B] with fb 107 [ 32.407103] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:38:primary B] visible 1 -> 1, off 0, on 0, ms 0 [ 32.407111] [drm:drm_atomic_commit] committing 000000002fb76196 [ 32.412928] [drm:drm_atomic_state_default_clear] Clearing atomic state 000000002fb76196 [ 32.412952] [drm:__drm_atomic_state_free] Freeing atomic state 000000002fb76196 [ 32.419204] [drm:drm_atomic_state_init] Allocated atomic state 00000000c894f060 [ 32.419214] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 000000009568c634 state to 00000000c894f060 [ 32.419223] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] 00000000cf4a60e5 state to 00000000c894f060 [ 32.419228] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] 00000000aeabf9c2 state to 00000000c894f060 [ 32.419230] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000aeabf9c2 to [NOCRTC] [ 32.419232] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000aeabf9c2 [ 32.419237] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] 0000000022208308 state to 00000000c894f060 [ 32.419238] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000022208308 to [NOCRTC] [ 32.419239] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000022208308 [ 32.419243] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] 00000000c310f7ae state to 00000000c894f060 [ 32.419249] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] 00000000a4d16e24 state to 00000000c894f060 [ 32.419254] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] 0000000038dfec44 state to 00000000c894f060 [ 32.419255] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000038dfec44 to [NOCRTC] [ 32.419256] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000038dfec44 [ 32.419261] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] 0000000063840ea5 state to 00000000c894f060 [ 32.419262] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000063840ea5 to [NOCRTC] [ 32.419263] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000063840ea5 [ 32.419267] [drm:drm_atomic_get_plane_state] Added [PLANE:48:primary C] 000000004b1ab138 state to 00000000c894f060 [ 32.419271] [drm:drm_atomic_get_plane_state] Added [PLANE:51:sprite C] 00000000474dec7b state to 00000000c894f060 [ 32.419272] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000474dec7b to [NOCRTC] [ 32.419273] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000474dec7b [ 32.419279] [drm:drm_atomic_get_plane_state] Added [PLANE:54:cursor C] 0000000022d4b0c0 state to 00000000c894f060 [ 32.419281] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000022d4b0c0 to [NOCRTC] [ 32.419282] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000022d4b0c0 [ 32.419289] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 00000000cf4a60e5 [ 32.419291] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000009568c634 to [CRTC:37:pipe A] [ 32.419293] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 000000009568c634 [ 32.419294] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to 00000000c894f060 [ 32.419305] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:59:DP-1] 000000006a33cf9b state to 00000000c894f060 [ 32.419308] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000006a33cf9b to [NOCRTC] [ 32.419309] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000006a33cf9b to [CRTC:37:pipe A] [ 32.419314] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1200] for CRTC state 00000000a4d16e24 [ 32.419316] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000c310f7ae to [CRTC:47:pipe B] [ 32.419317] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 00000000c310f7ae [ 32.419319] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to 00000000c894f060 [ 32.419325] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:70:DP-2] 000000007a0cecc5 state to 00000000c894f060 [ 32.419326] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000007a0cecc5 to [NOCRTC] [ 32.419328] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000007a0cecc5 to [CRTC:47:pipe B] [ 32.419334] [drm:drm_atomic_get_crtc_state] Added [CRTC:57:pipe C] 000000001200ee80 state to 00000000c894f060 [ 32.419336] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 000000001200ee80 [ 32.419337] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000004b1ab138 to [NOCRTC] [ 32.419338] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000004b1ab138 [ 32.419339] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:57:pipe C] to 00000000c894f060 [ 32.419341] [drm:drm_atomic_check_only] checking 00000000c894f060 [ 32.419348] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:59:DP-1] [ 32.419351] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:59:DP-1] keeps [ENCODER:58:DDI B], now on [CRTC:37:pipe A] [ 32.419353] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:70:DP-2] [ 32.419355] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:70:DP-2] keeps [ENCODER:69:DDI C], now on [CRTC:47:pipe B] [ 32.419400] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:37:pipe A] has [PLANE:28:primary A] with fb 107 [ 32.419432] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 32.419458] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:47:pipe B] has [PLANE:38:primary B] with fb 107 [ 32.419481] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:38:primary B] visible 1 -> 1, off 0, on 0, ms 0 [ 32.419486] [drm:drm_atomic_commit] committing 00000000c894f060 [ 32.426603] Adding 16642044k swap on /dev/sda3. Priority:-2 extents:1 across:16642044k SSFS [ 32.430178] [drm:drm_atomic_state_default_clear] Clearing atomic state 00000000c894f060 [ 32.430211] [drm:__drm_atomic_state_free] Freeing atomic state 00000000c894f060 [ 32.562669] random: crng init done [ 32.637258] audit: type=1400 audit(1517292885.420:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=789 comm="apparmor_parser" [ 32.637271] audit: type=1400 audit(1517292885.420:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=789 comm="apparmor_parser" [ 32.637280] audit: type=1400 audit(1517292885.420:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=789 comm="apparmor_parser" [ 32.637288] audit: type=1400 audit(1517292885.420:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=789 comm="apparmor_parser" [ 32.637597] audit: type=1400 audit(1517292885.420:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=788 comm="apparmor_parser" [ 32.637610] audit: type=1400 audit(1517292885.420:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=788 comm="apparmor_parser" [ 32.640297] audit: type=1400 audit(1517292885.424:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="unity8-dash" pid=792 comm="apparmor_parser" [ 32.644861] audit: type=1400 audit(1517292885.428:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=794 comm="apparmor_parser" [ 32.644873] audit: type=1400 audit(1517292885.428:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=794 comm="apparmor_parser" [ 32.649091] audit: type=1400 audit(1517292885.432:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=790 comm="apparmor_parser" [ 32.744903] new mount options do not match the existing superblock, will be ignored [ 32.969201] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 35.870101] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 35.870129] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 37.856777] [drm:drm_atomic_state_init] Allocated atomic state 00000000fe6a551d [ 37.856783] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 00000000a79bbdd3 state to 00000000fe6a551d [ 37.856789] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] 00000000172b5e7e state to 00000000fe6a551d [ 37.856793] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] 000000000e82e5a9 state to 00000000fe6a551d [ 37.856794] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000000e82e5a9 to [NOCRTC] [ 37.856795] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000000e82e5a9 [ 37.856798] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] 0000000019844d42 state to 00000000fe6a551d [ 37.856799] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000019844d42 to [NOCRTC] [ 37.856800] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000019844d42 [ 37.856804] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] 000000007bbe6405 state to 00000000fe6a551d [ 37.856809] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] 0000000049edf794 state to 00000000fe6a551d [ 37.856812] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] 000000002cb4bd89 state to 00000000fe6a551d [ 37.856812] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000002cb4bd89 to [NOCRTC] [ 37.856813] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000002cb4bd89 [ 37.856816] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] 0000000027737410 state to 00000000fe6a551d [ 37.856817] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000027737410 to [NOCRTC] [ 37.856818] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000027737410 [ 37.856821] [drm:drm_atomic_get_plane_state] Added [PLANE:48:primary C] 00000000a3045c8c state to 00000000fe6a551d [ 37.856824] [drm:drm_atomic_get_plane_state] Added [PLANE:51:sprite C] 000000007c2cba9b state to 00000000fe6a551d [ 37.856825] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000007c2cba9b to [NOCRTC] [ 37.856826] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000007c2cba9b [ 37.856828] [drm:drm_atomic_get_plane_state] Added [PLANE:54:cursor C] 000000009d2cde70 state to 00000000fe6a551d [ 37.856829] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000009d2cde70 to [NOCRTC] [ 37.856830] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000009d2cde70 [ 37.856835] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 00000000172b5e7e [ 37.856836] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000a79bbdd3 to [CRTC:37:pipe A] [ 37.856837] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 00000000a79bbdd3 [ 37.856839] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to 00000000fe6a551d [ 37.856846] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:59:DP-1] 00000000e1ab1616 state to 00000000fe6a551d [ 37.856848] [drm:drm_atomic_set_crtc_for_connector] Link connector state 00000000e1ab1616 to [NOCRTC] [ 37.856849] [drm:drm_atomic_set_crtc_for_connector] Link connector state 00000000e1ab1616 to [CRTC:37:pipe A] [ 37.856853] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1200] for CRTC state 0000000049edf794 [ 37.856854] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000007bbe6405 to [CRTC:47:pipe B] [ 37.856855] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 000000007bbe6405 [ 37.856856] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to 00000000fe6a551d [ 37.856859] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:70:DP-2] 000000002a28954b state to 00000000fe6a551d [ 37.856861] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000002a28954b to [NOCRTC] [ 37.856862] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000002a28954b to [CRTC:47:pipe B] [ 37.856867] [drm:drm_atomic_get_crtc_state] Added [CRTC:57:pipe C] 0000000089bcbb5d state to 00000000fe6a551d [ 37.856868] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 0000000089bcbb5d [ 37.856869] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000a3045c8c to [NOCRTC] [ 37.856870] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000a3045c8c [ 37.856871] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:57:pipe C] to 00000000fe6a551d [ 37.856873] [drm:drm_atomic_check_only] checking 00000000fe6a551d [ 37.856880] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:59:DP-1] [ 37.856882] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:59:DP-1] keeps [ENCODER:58:DDI B], now on [CRTC:37:pipe A] [ 37.856884] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:70:DP-2] [ 37.856886] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:70:DP-2] keeps [ENCODER:69:DDI C], now on [CRTC:47:pipe B] [ 37.856923] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:37:pipe A] has [PLANE:28:primary A] with fb 107 [ 37.856951] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 37.856986] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:47:pipe B] has [PLANE:38:primary B] with fb 107 [ 37.857021] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:38:primary B] visible 1 -> 1, off 0, on 0, ms 0 [ 37.857028] [drm:drm_atomic_commit] committing 00000000fe6a551d [ 37.867546] [drm:drm_atomic_state_default_clear] Clearing atomic state 00000000fe6a551d [ 37.867561] [drm:__drm_atomic_state_free] Freeing atomic state 00000000fe6a551d [ 141.313070] Console: switching to colour dummy device 80x25 [ 141.313200] [IGT] pm_rpm: executing [ 141.364666] [drm:drm_mode_addfb2] [FB:105] [ 141.418604] ahci 0000:00:1f.2: port does not support device sleep [ 142.431706] [IGT] pm_rpm: starting subtest basic-rte [ 142.431733] [drm:drm_mode_setcrtc] [CRTC:37:pipe A] [ 142.431760] [drm:drm_atomic_state_init] Allocated atomic state 000000002048618f [ 142.431769] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] 00000000097e8f5c state to 000000002048618f [ 142.431776] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 00000000683c59d1 state to 000000002048618f [ 142.431778] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 00000000097e8f5c [ 142.431780] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000683c59d1 to [NOCRTC] [ 142.431782] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000683c59d1 [ 142.431784] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to 000000002048618f [ 142.431793] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:59:DP-1] 00000000b9b3248e state to 000000002048618f [ 142.431795] [drm:drm_atomic_set_crtc_for_connector] Link connector state 00000000b9b3248e to [NOCRTC] [ 142.431797] [drm:drm_atomic_check_only] checking 000000002048618f [ 142.431800] [drm:drm_atomic_helper_check_modeset] [CRTC:37:pipe A] mode changed [ 142.431802] [drm:drm_atomic_helper_check_modeset] [CRTC:37:pipe A] enable changed [ 142.431803] [drm:drm_atomic_helper_check_modeset] [CRTC:37:pipe A] active changed [ 142.431805] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:59:DP-1] [ 142.431807] [drm:drm_atomic_helper_check_modeset] Disabling [CONNECTOR:59:DP-1] [ 142.431810] [drm:drm_atomic_helper_check_modeset] [CRTC:37:pipe A] needs all connectors, enable: n, active: n [ 142.431811] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to 000000002048618f [ 142.431851] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 142.431880] [drm:intel_atomic_check [i915]] New voltage level calculated to be logical 2, actual 2 [ 142.431909] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:37:pipe A] has [PLANE:28:primary A] with fb -1 [ 142.431934] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 0, off 1, on 0, ms 1 [ 142.431938] [drm:drm_atomic_commit] committing 000000002048618f [ 142.442471] [drm:intel_disable_pipe [i915]] disabling pipe A [ 142.459569] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 142.459631] [drm:intel_disable_shared_dpll [i915]] disable LCPLL 810 (active 3, on? 1) for crtc 37 [ 142.459693] [drm:intel_atomic_commit_tail [i915]] [ENCODER:58:DDI B] [ 142.459748] [drm:intel_atomic_commit_tail [i915]] [ENCODER:60:DP-MST A] [ 142.459798] [drm:intel_atomic_commit_tail [i915]] [ENCODER:61:DP-MST B] [ 142.459847] [drm:intel_atomic_commit_tail [i915]] [ENCODER:62:DP-MST C] [ 142.459895] [drm:intel_atomic_commit_tail [i915]] [ENCODER:69:DDI C] [ 142.459941] [drm:intel_atomic_commit_tail [i915]] [ENCODER:71:DP-MST A] [ 142.459987] [drm:intel_atomic_commit_tail [i915]] [ENCODER:72:DP-MST B] [ 142.460042] [drm:intel_atomic_commit_tail [i915]] [ENCODER:73:DP-MST C] [ 142.460144] [drm:verify_connector_state.isra.114 [i915]] [CONNECTOR:59:DP-1] [ 142.460225] [drm:verify_single_dpll_state.isra.115 [i915]] WRPLL 1 [ 142.460294] [drm:verify_single_dpll_state.isra.115 [i915]] WRPLL 2 [ 142.460368] [drm:verify_single_dpll_state.isra.115 [i915]] SPLL [ 142.460440] [drm:verify_single_dpll_state.isra.115 [i915]] LCPLL 810 [ 142.460517] [drm:verify_single_dpll_state.isra.115 [i915]] LCPLL 1350 [ 142.460585] [drm:verify_single_dpll_state.isra.115 [i915]] LCPLL 2700 [ 142.460681] [drm:intel_atomic_commit_tail [i915]] [CRTC:37:pipe A] [ 142.460700] [drm:drm_atomic_state_default_clear] Clearing atomic state 000000002048618f [ 142.460722] [drm:__drm_atomic_state_free] Freeing atomic state 000000002048618f [ 142.460761] [drm:drm_mode_setcrtc] [CRTC:47:pipe B] [ 142.460798] [drm:drm_atomic_state_init] Allocated atomic state 00000000759ed35d [ 142.460816] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] 00000000f942625d state to 00000000759ed35d [ 142.460829] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] 000000006c7ba7cf state to 00000000759ed35d [ 142.460833] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 00000000f942625d [ 142.460837] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000006c7ba7cf to [NOCRTC] [ 142.460843] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000006c7ba7cf [ 142.460848] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to 00000000759ed35d [ 142.460869] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:70:DP-2] 000000003c61ac71 state to 00000000759ed35d [ 142.460874] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000003c61ac71 to [NOCRTC] [ 142.460879] [drm:drm_atomic_check_only] checking 00000000759ed35d [ 142.460887] [drm:drm_atomic_helper_check_modeset] [CRTC:47:pipe B] mode changed [ 142.460893] [drm:drm_atomic_helper_check_modeset] [CRTC:47:pipe B] enable changed [ 142.460898] [drm:drm_atomic_helper_check_modeset] [CRTC:47:pipe B] active changed [ 142.460904] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:70:DP-2] [ 142.460909] [drm:drm_atomic_helper_check_modeset] Disabling [CONNECTOR:70:DP-2] [ 142.460916] [drm:drm_atomic_helper_check_modeset] [CRTC:47:pipe B] needs all connectors, enable: n, active: n [ 142.460921] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to 00000000759ed35d [ 142.460997] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 142.461070] [drm:intel_atomic_check [i915]] New voltage level calculated to be logical 2, actual 2 [ 142.461143] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:47:pipe B] has [PLANE:38:primary B] with fb -1 [ 142.461217] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:38:primary B] visible 1 -> 0, off 1, on 0, ms 1 [ 142.461227] [drm:drm_atomic_commit] committing 00000000759ed35d [ 142.461356] [drm:intel_disable_pipe [i915]] disabling pipe B [ 142.474898] [drm:intel_disable_shared_dpll [i915]] disable LCPLL 810 (active 2, on? 1) for crtc 47 [ 142.474952] [drm:intel_disable_shared_dpll [i915]] disabling LCPLL 810 [ 142.475007] [drm:intel_atomic_commit_tail [i915]] [ENCODER:58:DDI B] [ 142.475054] [drm:intel_atomic_commit_tail [i915]] [ENCODER:60:DP-MST A] [ 142.475099] [drm:intel_atomic_commit_tail [i915]] [ENCODER:61:DP-MST B] [ 142.475141] [drm:intel_atomic_commit_tail [i915]] [ENCODER:62:DP-MST C] [ 142.475182] [drm:intel_atomic_commit_tail [i915]] [ENCODER:69:DDI C] [ 142.475224] [drm:intel_atomic_commit_tail [i915]] [ENCODER:71:DP-MST A] [ 142.475265] [drm:intel_atomic_commit_tail [i915]] [ENCODER:72:DP-MST B] [ 142.475305] [drm:intel_atomic_commit_tail [i915]] [ENCODER:73:DP-MST C] [ 142.475350] [drm:verify_connector_state.isra.114 [i915]] [CONNECTOR:70:DP-2] [ 142.475396] [drm:verify_single_dpll_state.isra.115 [i915]] WRPLL 1 [ 142.475441] [drm:verify_single_dpll_state.isra.115 [i915]] WRPLL 2 [ 142.475485] [drm:verify_single_dpll_state.isra.115 [i915]] SPLL [ 142.475528] [drm:verify_single_dpll_state.isra.115 [i915]] LCPLL 810 [ 142.475570] [drm:verify_single_dpll_state.isra.115 [i915]] LCPLL 1350 [ 142.475611] [drm:verify_single_dpll_state.isra.115 [i915]] LCPLL 2700 [ 142.475668] [drm:intel_atomic_commit_tail [i915]] [CRTC:47:pipe B] [ 142.475678] [drm:drm_atomic_state_default_clear] Clearing atomic state 00000000759ed35d [ 142.475690] [drm:__drm_atomic_state_free] Freeing atomic state 00000000759ed35d [ 142.475709] [drm:drm_mode_setcrtc] [CRTC:57:pipe C] [ 142.475730] [drm:drm_atomic_state_init] Allocated atomic state 00000000759ed35d [ 142.475739] [drm:drm_atomic_get_crtc_state] Added [CRTC:57:pipe C] 00000000d6af5444 state to 00000000759ed35d [ 142.475746] [drm:drm_atomic_get_plane_state] Added [PLANE:48:primary C] 0000000009c84378 state to 00000000759ed35d [ 142.475749] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 00000000d6af5444 [ 142.475751] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000009c84378 to [NOCRTC] [ 142.475754] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000009c84378 [ 142.475757] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:57:pipe C] to 00000000759ed35d [ 142.475761] [drm:drm_atomic_check_only] checking 00000000759ed35d [ 142.475768] [drm:drm_atomic_commit] committing 00000000759ed35d [ 142.475801] [drm:drm_atomic_state_default_clear] Clearing atomic state 00000000759ed35d [ 142.475806] [drm:__drm_atomic_state_free] Freeing atomic state 00000000759ed35d [ 143.991255] [drm:ibx_hpd_irq_handler [i915]] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040 [ 143.991339] [drm:intel_hpd_irq_handler [i915]] digital hpd port C - short [ 143.991474] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port C - short [ 143.992012] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 84 01 01 00 01 00 02 02 06 03 00 00 00 [ 153.239274] [IGT] pm_rpm: starting subtest basic-pci-d3-state [ 153.239325] [drm:drm_mode_setcrtc] [CRTC:37:pipe A] [ 153.239374] [drm:drm_atomic_state_init] Allocated atomic state 000000001836d86c [ 153.239397] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] 000000008e5747b9 state to 000000001836d86c [ 153.239413] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 000000004338700e state to 000000001836d86c [ 153.239419] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 000000008e5747b9 [ 153.239424] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000004338700e to [NOCRTC] [ 153.239429] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000004338700e [ 153.239435] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to 000000001836d86c [ 153.239443] [drm:drm_atomic_check_only] checking 000000001836d86c [ 153.239455] [drm:drm_atomic_commit] committing 000000001836d86c [ 153.239506] [drm:drm_atomic_state_default_clear] Clearing atomic state 000000001836d86c [ 153.239518] [drm:__drm_atomic_state_free] Freeing atomic state 000000001836d86c [ 153.239533] [drm:drm_mode_setcrtc] [CRTC:47:pipe B] [ 153.239550] [drm:drm_atomic_state_init] Allocated atomic state 000000001836d86c [ 153.239561] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] 0000000019279e61 state to 000000001836d86c [ 153.239570] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] 000000009254f3e8 state to 000000001836d86c [ 153.239573] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 0000000019279e61 [ 153.239576] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000009254f3e8 to [NOCRTC] [ 153.239579] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000009254f3e8 [ 153.239583] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to 000000001836d86c [ 153.239587] [drm:drm_atomic_check_only] checking 000000001836d86c [ 153.239593] [drm:drm_atomic_commit] committing 000000001836d86c [ 153.239620] [drm:drm_atomic_state_default_clear] Clearing atomic state 000000001836d86c [ 153.239629] [drm:__drm_atomic_state_free] Freeing atomic state 000000001836d86c [ 153.239639] [drm:drm_mode_setcrtc] [CRTC:57:pipe C] [ 153.239656] [drm:drm_atomic_state_init] Allocated atomic state 000000001836d86c [ 153.239664] [drm:drm_atomic_get_crtc_state] Added [CRTC:57:pipe C] 00000000f942625d state to 000000001836d86c [ 153.239672] [drm:drm_atomic_get_plane_state] Added [PLANE:48:primary C] 000000002db69414 state to 000000001836d86c [ 153.239675] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 00000000f942625d [ 153.239678] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000002db69414 to [NOCRTC] [ 153.239681] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000002db69414 [ 153.239684] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:57:pipe C] to 000000001836d86c [ 153.239688] [drm:drm_atomic_check_only] checking 000000001836d86c [ 153.239693] [drm:drm_atomic_commit] committing 000000001836d86c [ 153.239718] [drm:drm_atomic_state_default_clear] Clearing atomic state 000000001836d86c [ 153.239725] [drm:__drm_atomic_state_free] Freeing atomic state 000000001836d86c [ 163.756707] [IGT] pm_rpm: exiting, ret=99 [ 163.796176] [drm:drm_atomic_state_init] Allocated atomic state 000000001836d86c [ 163.796192] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 00000000b78eb01f state to 000000001836d86c [ 163.796202] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] 00000000e39797f0 state to 000000001836d86c [ 163.796205] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000e39797f0 to [NOCRTC] [ 163.796209] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000e39797f0 [ 163.796218] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] 000000000f68528c state to 000000001836d86c [ 163.796221] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000000f68528c to [NOCRTC] [ 163.796224] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000000f68528c [ 163.796232] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] 00000000fd851e7c state to 000000001836d86c [ 163.796240] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] 000000004e00f0ef state to 000000001836d86c [ 163.796243] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000004e00f0ef to [NOCRTC] [ 163.796245] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000004e00f0ef [ 163.796253] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] 00000000eb4fd1d6 state to 000000001836d86c [ 163.796256] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000eb4fd1d6 to [NOCRTC] [ 163.796259] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000eb4fd1d6 [ 163.796269] [drm:drm_atomic_get_plane_state] Added [PLANE:48:primary C] 0000000009c84378 state to 000000001836d86c [ 163.796278] [drm:drm_atomic_get_plane_state] Added [PLANE:51:sprite C] 0000000036ec184d state to 000000001836d86c [ 163.796280] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000036ec184d to [NOCRTC] [ 163.796283] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000036ec184d [ 163.796291] [drm:drm_atomic_get_plane_state] Added [PLANE:54:cursor C] 000000006c7ba7cf state to 000000001836d86c [ 163.796294] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000006c7ba7cf to [NOCRTC] [ 163.796296] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000006c7ba7cf [ 163.796311] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] 00000000d6af5444 state to 000000001836d86c [ 163.796325] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 00000000d6af5444 [ 163.796328] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000b78eb01f to [CRTC:37:pipe A] [ 163.796332] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 00000000b78eb01f [ 163.796336] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to 000000001836d86c [ 163.796355] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:59:DP-1] 000000001cc872d6 state to 000000001836d86c [ 163.796359] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000001cc872d6 to [CRTC:37:pipe A] [ 163.796369] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] 00000000c4623d54 state to 000000001836d86c [ 163.796378] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1200] for CRTC state 00000000c4623d54 [ 163.796380] [drm:drm_atomic_set_crtc_for_plane] Link plane state 00000000fd851e7c to [CRTC:47:pipe B] [ 163.796384] [drm:drm_atomic_set_fb_for_plane] Set [FB:107] for plane state 00000000fd851e7c [ 163.796388] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to 000000001836d86c [ 163.796397] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:70:DP-2] 0000000049df64d6 state to 000000001836d86c [ 163.796400] [drm:drm_atomic_set_crtc_for_connector] Link connector state 0000000049df64d6 to [CRTC:47:pipe B] [ 163.796411] [drm:drm_atomic_get_crtc_state] Added [CRTC:57:pipe C] 00000000e1f611ef state to 000000001836d86c [ 163.796414] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 00000000e1f611ef [ 163.796416] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000009c84378 to [NOCRTC] [ 163.796419] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000009c84378 [ 163.796423] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:57:pipe C] to 000000001836d86c [ 163.796427] [drm:drm_atomic_check_only] checking 000000001836d86c [ 163.796436] [drm:drm_atomic_helper_check_modeset] [CRTC:37:pipe A] mode changed [ 163.796440] [drm:drm_atomic_helper_check_modeset] [CRTC:37:pipe A] enable changed [ 163.796444] [drm:drm_atomic_helper_check_modeset] [CRTC:37:pipe A] active changed [ 163.796448] [drm:drm_atomic_helper_check_modeset] [CRTC:47:pipe B] mode changed [ 163.796453] [drm:drm_atomic_helper_check_modeset] [CRTC:47:pipe B] enable changed [ 163.796457] [drm:drm_atomic_helper_check_modeset] [CRTC:47:pipe B] active changed [ 163.796465] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:59:DP-1] [ 163.796471] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:59:DP-1] using [ENCODER:58:DDI B] on [CRTC:37:pipe A] [ 163.796476] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:70:DP-2] [ 163.796482] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:70:DP-2] using [ENCODER:69:DDI C] on [CRTC:47:pipe B] [ 163.796487] [drm:drm_atomic_helper_check_modeset] [CRTC:37:pipe A] needs all connectors, enable: y, active: y [ 163.796491] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to 000000001836d86c [ 163.796497] [drm:drm_atomic_helper_check_modeset] [CRTC:47:pipe B] needs all connectors, enable: y, active: y [ 163.796500] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to 000000001836d86c [ 163.796507] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to 000000001836d86c [ 163.796607] [drm:intel_atomic_check [i915]] [CONNECTOR:59:DP-1] checking for sink bpp constrains [ 163.796684] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24 [ 163.796762] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 270000 pixel clock 148500KHz [ 163.796839] [drm:intel_dp_compute_config [i915]] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 163.796906] [drm:intel_dp_compute_config [i915]] DP link bw required 445500 available 648000 [ 163.796980] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 163.797053] [drm:intel_dump_pipe_config [i915]] [CRTC:37:pipe A][modeset] [ 163.797121] [drm:intel_dump_pipe_config [i915]] output_types: DP (0x80) [ 163.797187] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 [ 163.797254] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 5767168, gmch_n: 8388608, link_m: 240298, link_n: 262144, tu: 64 [ 163.797317] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 163.797379] [drm:intel_dump_pipe_config [i915]] requested mode: [ 163.797388] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 163.797449] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 163.797456] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 163.797519] [drm:intel_dump_pipe_config [i915]] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 163.797581] [drm:intel_dump_pipe_config [i915]] port clock: 162000, pipe src size: 1920x1080, pixel rate 148500 [ 163.797642] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 163.797702] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 163.797762] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 163.797821] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 163.797881] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] disabled, scaler_id = 0 [ 163.797940] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = 0 [ 163.797998] [drm:intel_dump_pipe_config [i915]] [PLANE:34:cursor A] disabled, scaler_id = 0 [ 163.798003] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to 000000001836d86c [ 163.798072] [drm:intel_atomic_check [i915]] [CONNECTOR:70:DP-2] checking for sink bpp constrains [ 163.798138] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24 [ 163.798209] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 270000 pixel clock 154000KHz [ 163.798294] [drm:intel_dp_compute_config [i915]] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 163.798360] [drm:intel_dp_compute_config [i915]] DP link bw required 462000 available 648000 [ 163.798429] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 163.798497] [drm:intel_dump_pipe_config [i915]] [CRTC:47:pipe B][modeset] [ 163.798561] [drm:intel_dump_pipe_config [i915]] output_types: DP (0x80) [ 163.798623] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0 [ 163.798687] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 5980766, gmch_n: 8388608, link_m: 249198, link_n: 262144, tu: 64 [ 163.798747] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 163.798807] [drm:intel_dump_pipe_config [i915]] requested mode: [ 163.798814] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 163.798873] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 163.798879] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 163.798941] [drm:intel_dump_pipe_config [i915]] crtc timings: 154000 1920 1968 2000 2080 1200 1203 1209 1235, type: 0x48 flags: 0x9 [ 163.799002] [drm:intel_dump_pipe_config [i915]] port clock: 162000, pipe src size: 1920x1200, pixel rate 154000 [ 163.799060] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 163.799118] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 163.799177] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 163.799234] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 163.799293] [drm:intel_dump_pipe_config [i915]] [PLANE:38:primary B] disabled, scaler_id = 0 [ 163.799351] [drm:intel_dump_pipe_config [i915]] [PLANE:41:sprite B] disabled, scaler_id = 0 [ 163.799409] [drm:intel_dump_pipe_config [i915]] [PLANE:44:cursor B] disabled, scaler_id = 0 [ 163.799481] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 163.799547] [drm:intel_atomic_check [i915]] New voltage level calculated to be logical 2, actual 2 [ 163.799620] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:37:pipe A] has [PLANE:28:primary A] with fb 107 [ 163.799688] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 0 -> 1, off 0, on 1, ms 1 [ 163.799755] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:47:pipe B] has [PLANE:38:primary B] with fb 107 [ 163.799819] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:38:primary B] visible 0 -> 1, off 0, on 1, ms 1 [ 163.799891] [drm:intel_reference_shared_dpll [i915]] using LCPLL 810 for pipe A [ 163.799962] [drm:intel_reference_shared_dpll [i915]] using LCPLL 810 for pipe B [ 163.799970] [drm:drm_atomic_commit] committing 000000001836d86c [ 163.800134] [drm:intel_atomic_commit_tail [i915]] [ENCODER:58:DDI B] [ 163.800179] [drm:intel_atomic_commit_tail [i915]] [ENCODER:60:DP-MST A] [ 163.800226] [drm:intel_atomic_commit_tail [i915]] [ENCODER:61:DP-MST B] [ 163.800270] [drm:intel_atomic_commit_tail [i915]] [ENCODER:62:DP-MST C] [ 163.800316] [drm:intel_atomic_commit_tail [i915]] [ENCODER:69:DDI C] [ 163.800360] [drm:intel_atomic_commit_tail [i915]] [ENCODER:71:DP-MST A] [ 163.800404] [drm:intel_atomic_commit_tail [i915]] [ENCODER:72:DP-MST B] [ 163.800446] [drm:intel_atomic_commit_tail [i915]] [ENCODER:73:DP-MST C] [ 163.800493] [drm:verify_single_dpll_state.isra.115 [i915]] WRPLL 1 [ 163.800539] [drm:verify_single_dpll_state.isra.115 [i915]] WRPLL 2 [ 163.800586] [drm:verify_single_dpll_state.isra.115 [i915]] SPLL [ 163.800629] [drm:verify_single_dpll_state.isra.115 [i915]] LCPLL 810 [ 163.800673] [drm:verify_single_dpll_state.isra.115 [i915]] LCPLL 1350 [ 163.800717] [drm:verify_single_dpll_state.isra.115 [i915]] LCPLL 2700 [ 163.800768] [drm:intel_enable_shared_dpll [i915]] enable LCPLL 810 (active 1, on? 0) for crtc 37 [ 163.800814] [drm:intel_enable_shared_dpll [i915]] enabling LCPLL 810 [ 163.802796] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 163.802839] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 163.802880] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 163.802920] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 163.805488] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 163.805536] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 163.805577] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 163.808143] [drm:intel_dp_start_link_train [i915]] clock recovery OK [ 163.808206] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2 [ 163.811026] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful [ 163.811385] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:59:DP-1] Link Training Passed at Link Rate = 162000, Lane count = 4 [ 163.812020] [drm:intel_enable_pipe [i915]] enabling pipe A [ 163.812058] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 163.812087] [drm:intel_fbc_enable [i915]] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1 [ 163.812113] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 163.812152] [drm:intel_enable_shared_dpll [i915]] enable LCPLL 810 (active 3, on? 1) for crtc 47 [ 163.813245] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 163.813264] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 163.813281] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 163.813299] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 163.813939] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 163.813955] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 163.813970] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 163.814592] [drm:intel_dp_start_link_train [i915]] clock recovery OK [ 163.814610] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2 [ 163.815549] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful [ 163.815900] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:70:DP-2] Link Training Passed at Link Rate = 162000, Lane count = 4 [ 163.816250] [drm:intel_enable_pipe [i915]] enabling pipe B [ 163.816273] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 163.833020] [drm:verify_connector_state.isra.114 [i915]] [CONNECTOR:59:DP-1] [ 163.833060] [drm:intel_atomic_commit_tail [i915]] [CRTC:37:pipe A] [ 163.833100] [drm:verify_single_dpll_state.isra.115 [i915]] LCPLL 810 [ 163.833130] [drm:verify_connector_state.isra.114 [i915]] [CONNECTOR:70:DP-2] [ 163.833162] [drm:intel_atomic_commit_tail [i915]] [CRTC:47:pipe B] [ 163.833198] [drm:verify_single_dpll_state.isra.115 [i915]] LCPLL 810 [ 163.833209] [drm:drm_atomic_state_default_clear] Clearing atomic state 000000001836d86c [ 163.833231] [drm:__drm_atomic_state_free] Freeing atomic state 000000001836d86c [ 164.014870] ahci 0000:00:1f.2: port does not support device sleep