[ 0.000000] Allocated 4096 bytes for 4 pacas at (ptrval) [ 0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12 [ 0.000000] hash-mmu: Initializing hash mmu with SLB [ 0.000000] Linux version 4.15.5-gentoo (root@T800) (gcc version 7.3.0 (Gentoo 7.3.0 p1.0)) #1 SMP Sat Feb 24 13:40:30 CET 2018 [ 0.000000] Found U3 memory controller & host bridge @ 0xf8000000 revision: 0x35 [ 0.000000] Mapped at 0xd000380080000000 [ 0.000000] Found a K2 mac-io controller, rev: 96, mapped at 0x (ptrval) [ 0.000000] PowerMac motherboard: PowerMac G5 [ 0.000000] DART table allocated at: (ptrval) [ 0.000000] DART IOMMU initialized for U3 type chipset [ 0.000000] Using PowerMac machine description [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] CPU maps initialized for 1 thread per core [ 0.000000] (thread shift is 0) [ 0.000000] ----------------------------------------------------- [ 0.000000] ppc64_pft_size = 0x0 [ 0.000000] phys_mem_size = 0x200000000 [ 0.000000] dcache_bsize = 0x80 [ 0.000000] icache_bsize = 0x80 [ 0.000000] cpu_features = 0x0804806318100448 [ 0.000000] possible = 0xdf5fffff18500649 [ 0.000000] always = 0x0000000018100040 [ 0.000000] cpu_user_features = 0xdc080000 0x00000000 [ 0.000000] mmu_features = 0x0c008001 [ 0.000000] firmware_features = 0x0000000000000000 [ 0.000000] htab_address = 0x (ptrval) [ 0.000000] htab_hash_mask = 0xfffff [ 0.000000] ----------------------------------------------------- [ 0.000000] Found U3-AGP PCI host bridge. Firmware bus number: 240->255 [ 0.000000] PCI host bridge /pci@0,f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000 [ 0.000000] Can't get bus-range for /ht@0,f2000000, assume bus 0 [ 0.000000] Found U3-HT PCI host bridge. Firmware bus number: 0->239 [ 0.000000] PCI host bridge /ht@0,f2000000 (primary) ranges: [ 0.000000] via-pmu: Server Mode is disabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=774, gen1=773 [ 0.000000] nvram: Active bank is: 0 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x280000000, Total RAM: 0x200000000 [ 0.000000] Memory hole size: 2048MB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000027fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000027fffffff] [ 0.000000] On node 0 totalpages: 2097152 [ 0.000000] DMA zone: 40960 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 2097152 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 27 pages/cpu @ (ptrval) s71576 r0 d39016 u524288 [ 0.000000] pcpu-alloc: s71576 r0 d39016 u524288 alloc=1*1048576 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2056192 [ 0.000000] Kernel command line: ro root=/dev/sda8 init=/usr/lib/systemd/systemd video=offb:off radeon.modeset=1 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 8054096K/8388608K available (7444K kernel code, 1028K rwdata, 824K rodata, 384K init, 363K bss, 334512K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 [ 0.000000] mpic: Resetting [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 2 CPUs [ 0.000000] mpic: ISU size: 120, shift: 7, mask: 7f [ 0.000000] mpic: Initializing for 120 sources [ 0.000000] mpic: Resetting [ 0.000000] mpic: Setting up MPIC " MPIC 2 " version 1.2 at f8040000, max 2 CPUs [ 0.000000] mpic: ISU size: 124, shift: 7, mask: 7f [ 0.000000] mpic: Initializing for 124 sources [ 0.000000] /u3@0,f8000000/mpic@f8040000: hooking up to IRQ 56 [ 0.000000] time_init: decrementer frequency = 33.333333 MHz [ 0.000000] time_init: processor frequency = 2300.000000 MHz [ 0.000002] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x7b00c4bad, max_idle_ns: 440795202744 ns [ 0.000782] clocksource: timebase mult[1e000005] shift[24] registered [ 0.001460] clockevent: decrementer mult[8888887] shift[32] cpu[0] [ 0.001518] Console: colour dummy device 80x25 [ 0.002144] console [tty0] enabled [ 0.002745] bootconsole [udbg0] disabled [ 0.003364] pid_max: default: 32768 minimum: 301 [ 0.003459] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.003485] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004593] PowerMac SMP probe found 2 cpus [ 0.004728] KeyWest i2c @0xf8001003 irq 16 /u3@0,f8000000/i2c@f8001000 [ 0.004734] channel 0 bus [ 0.004737] channel 1 bus [ 0.004795] KeyWest i2c @0x80018000 irq 26 /ht@0,f2000000/pci@3/mac-io@7/i2c@18000 [ 0.004800] channel 0 bus [ 0.004859] PMU i2c /ht@0,f2000000/pci@3/mac-io@7/via-pmu@16000/pmu-i2c [ 0.004863] channel 1 bus [ 0.004870] channel 2 bus [ 0.004924] Processor timebase sync using Pulsar i2c clock [ 0.004927] mpic: requesting IPIs... [ 0.005103] PPC970/FX/MP performance monitor hardware support registered [ 0.005150] Hierarchical SRCU implementation. [ 0.005327] smp: Bringing up secondary CPUs ... [ 0.042600] smp: Brought up 1 node, 2 CPUs [ 0.043396] Using standard scheduler topology [ 0.043817] devtmpfs: initialized [ 0.047078] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.047094] futex hash table entries: 512 (order: 4, 65536 bytes) [ 0.047176] xor: measuring software checksum speed [ 0.079202] 8regs : 6224.400 MB/sec [ 0.112563] 8regs_prefetch: 5180.400 MB/sec [ 0.145923] 32regs : 6291.600 MB/sec [ 0.179285] 32regs_prefetch: 5553.600 MB/sec [ 0.212645] altivec : 9235.200 MB/sec [ 0.212648] xor: using function: altivec (9235.200 MB/sec) [ 0.212821] NET: Registered protocol family 16 [ 0.213560] PCI: Probing PCI hardware [ 0.213804] PCI host bridge to bus 0000:f0 [ 0.213811] pci_bus 0000:f0: root bus resource [io 0x10000-0x80ffff] (bus address [0x0000-0x7fffff]) [ 0.213817] pci_bus 0000:f0: root bus resource [mem 0xf1000000-0xf1ffffff] [ 0.213821] pci_bus 0000:f0: root bus resource [mem 0x90000000-0xafffffff] [ 0.213826] pci_bus 0000:f0: root bus resource [bus f0-ff] [ 0.213832] pci_bus 0000:f0: busn_res: [bus f0-ff] end is updated to ff [ 0.213855] pci 0000:f0:0b.0: [106b:0059] type 00 class 0x060000 [ 0.213990] pci 0000:f0:10.0: [1002:4e48] type 00 class 0x030000 [ 0.214010] pci 0000:f0:10.0: reg 0x10: [mem 0xa0000000-0xafffffff pref] [ 0.214018] pci 0000:f0:10.0: reg 0x14: [io 0x10400-0x104ff] [ 0.214026] pci 0000:f0:10.0: reg 0x18: [mem 0x90000000-0x9000ffff] [ 0.214052] pci 0000:f0:10.0: reg 0x30: [mem 0x90020000-0x9003ffff pref] [ 0.214083] pci 0000:f0:10.0: supports D1 D2 [ 0.215920] IOMMU table initialized, virtual merging enabled [ 0.216034] pci_bus 0000:f0: busn_res: [bus f0-ff] end is updated to f0 [ 0.216204] PCI host bridge to bus 0001:00 [ 0.216210] pci_bus 0001:00: root bus resource [io 0x811000-0xc10fff] (bus address [0x0000-0x3fffff]) [ 0.216215] pci_bus 0001:00: root bus resource [mem 0xfa000000-0xffffffff] [ 0.216219] pci_bus 0001:00: root bus resource [mem 0x80000000-0x8fffffff] [ 0.216223] pci_bus 0001:00: root bus resource [mem 0xb0000000-0xefffffff] [ 0.216228] pci_bus 0001:00: root bus resource [bus 00-ef] [ 0.216234] pci_bus 0001:00: busn_res: [bus 00-ef] end is updated to ff [ 0.216254] pci 0001:00:00.0: [106b:0057] type 00 class 0x060000 [ 0.216335] pci 0001:00:01.0: [1022:7450] type 01 class 0x060400 [ 0.216430] pci 0001:00:02.0: [1022:7450] type 01 class 0x060400 [ 0.216521] pci 0001:00:03.0: [106b:0045] type 01 class 0x060400 [ 0.216632] pci 0001:00:04.0: [106b:0046] type 01 class 0x060400 [ 0.216736] pci 0001:00:05.0: [106b:0047] type 01 class 0x060400 [ 0.216840] pci 0001:00:06.0: [106b:0048] type 01 class 0x060400 [ 0.216944] pci 0001:00:07.0: [106b:0049] type 01 class 0x060400 [ 0.217124] pci 0001:00:01.0: PCI bridge to [bus 06] [ 0.217181] pci 0001:00:02.0: PCI bridge to [bus 07] [ 0.217244] pci 0001:01:07.0: [106b:0041] type 00 class 0xff0000 [ 0.217259] pci 0001:01:07.0: reg 0x10: [mem 0x80000000-0x8007ffff] [ 0.217365] pci 0001:01:08.0: [106b:0040] type 00 class 0x0c0310 [ 0.217380] pci 0001:01:08.0: reg 0x10: [mem 0x80081000-0x80081fff] [ 0.217472] pci 0001:01:09.0: [106b:0040] type 00 class 0x0c0310 [ 0.217487] pci 0001:01:09.0: reg 0x10: [mem 0x80080000-0x80080fff] [ 0.217574] pci 0001:00:03.0: PCI bridge to [bus 01] [ 0.217584] pci 0001:00:03.0: bridge window [mem 0x80000000-0x800fffff] [ 0.217588] pci 0001:00:03.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.217706] pci 0001:02:0b.0: [1033:0035] type 00 class 0x0c0310 [ 0.217724] pci 0001:02:0b.0: reg 0x10: [mem 0x80102000-0x80102fff] [ 0.217782] pci 0001:02:0b.0: supports D1 D2 [ 0.217784] pci 0001:02:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.217846] pci 0001:02:0b.1: [1033:0035] type 00 class 0x0c0310 [ 0.217864] pci 0001:02:0b.1: reg 0x10: [mem 0x80101000-0x80101fff] [ 0.217921] pci 0001:02:0b.1: supports D1 D2 [ 0.217923] pci 0001:02:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.217982] pci 0001:02:0b.2: [1033:00e0] type 00 class 0x0c0320 [ 0.217999] pci 0001:02:0b.2: reg 0x10: [mem 0x80100000-0x801000ff] [ 0.218057] pci 0001:02:0b.2: supports D1 D2 [ 0.218059] pci 0001:02:0b.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.218112] pci 0001:00:04.0: PCI bridge to [bus 02] [ 0.218123] pci 0001:00:04.0: bridge window [mem 0x80100000-0x801fffff] [ 0.218127] pci 0001:00:04.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.218222] pci 0001:03:0d.0: [106b:0043] type 00 class 0xff0000 [ 0.218235] pci 0001:03:0d.0: reg 0x10: [mem 0x80204000-0x80207fff] [ 0.218328] pci 0001:03:0e.0: [106b:0042] type 00 class 0x0c0010 [ 0.218345] pci 0001:03:0e.0: reg 0x10: [mem 0x80200000-0x80200fff] [ 0.218397] pci 0001:03:0e.0: supports D1 D2 [ 0.218399] pci 0001:03:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.218451] pci 0001:00:05.0: PCI bridge to [bus 03] [ 0.218463] pci 0001:00:05.0: bridge window [mem 0x80200000-0x802fffff] [ 0.218467] pci 0001:00:05.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.218566] pci 0001:04:0f.0: [106b:004c] type 00 class 0x020000 [ 0.218582] pci 0001:04:0f.0: reg 0x10: [mem 0x80400000-0x805fffff] [ 0.218617] pci 0001:04:0f.0: reg 0x30: [mem 0x80300000-0x803fffff pref] [ 0.218676] pci 0001:00:06.0: PCI bridge to [bus 04] [ 0.218687] pci 0001:00:06.0: bridge window [mem 0x80300000-0x805fffff] [ 0.218691] pci 0001:00:06.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.218769] pci 0001:05:0c.0: [1166:0240] type 00 class 0x01018f [ 0.218783] pci 0001:05:0c.0: reg 0x10: [io 0x811000-0x811007] [ 0.218791] pci 0001:05:0c.0: reg 0x14: [io 0x811000-0x811003] [ 0.218798] pci 0001:05:0c.0: reg 0x18: [io 0x811000-0x811007] [ 0.218805] pci 0001:05:0c.0: reg 0x1c: [io 0x811000-0x811003] [ 0.218813] pci 0001:05:0c.0: reg 0x20: [io 0x811000-0x81100f] [ 0.218820] pci 0001:05:0c.0: reg 0x24: [mem 0x80600000-0x80601fff] [ 0.218891] pci 0001:00:07.0: PCI bridge to [bus 05] [ 0.218902] pci 0001:00:07.0: bridge window [mem 0x80600000-0x806fffff] [ 0.218906] pci 0001:00:07.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.218957] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 07 [ 0.219065] PCI 0000:f0 Cannot reserve Legacy IO [io 0x10000-0x10fff] [ 0.219072] pci_bus 0000:f0: resource 4 [io 0x10000-0x80ffff] [ 0.219074] pci_bus 0000:f0: resource 5 [mem 0xf1000000-0xf1ffffff] [ 0.219076] pci_bus 0000:f0: resource 6 [mem 0x90000000-0xafffffff] [ 0.219112] pci 0001:00:01.0: PCI bridge to [bus 06] [ 0.219120] pci 0001:00:02.0: PCI bridge to [bus 07] [ 0.219126] pci 0001:00:03.0: PCI bridge to [bus 01] [ 0.219131] pci 0001:00:03.0: bridge window [mem 0x80000000-0x800fffff] [ 0.219137] pci 0001:00:04.0: PCI bridge to [bus 02] [ 0.219142] pci 0001:00:04.0: bridge window [mem 0x80100000-0x801fffff] [ 0.219148] pci 0001:00:05.0: PCI bridge to [bus 03] [ 0.219152] pci 0001:00:05.0: bridge window [mem 0x80200000-0x802fffff] [ 0.219158] pci 0001:00:06.0: PCI bridge to [bus 04] [ 0.219163] pci 0001:00:06.0: bridge window [mem 0x80300000-0x805fffff] [ 0.219169] pci 0001:00:07.0: PCI bridge to [bus 05] [ 0.219174] pci 0001:00:07.0: bridge window [mem 0x80600000-0x806fffff] [ 0.219180] pci_bus 0001:00: resource 4 [io 0x811000-0xc10fff] [ 0.219182] pci_bus 0001:00: resource 5 [mem 0xfa000000-0xffffffff] [ 0.219184] pci_bus 0001:00: resource 6 [mem 0x80000000-0x8fffffff] [ 0.219186] pci_bus 0001:00: resource 7 [mem 0xb0000000-0xefffffff] [ 0.219189] pci_bus 0001:01: resource 1 [mem 0x80000000-0x800fffff] [ 0.219191] pci_bus 0001:02: resource 1 [mem 0x80100000-0x801fffff] [ 0.219193] pci_bus 0001:03: resource 1 [mem 0x80200000-0x802fffff] [ 0.219196] pci_bus 0001:04: resource 1 [mem 0x80300000-0x805fffff] [ 0.219198] pci_bus 0001:05: resource 1 [mem 0x80600000-0x806fffff] [ 0.219199] PCI: Probing PCI hardware done [ 0.222969] HugeTLB registered 16.0 MiB page size, pre-allocated 0 pages [ 0.279423] raid6: altivecx1 gen() 3659 MB/s [ 0.336144] raid6: altivecx2 gen() 4817 MB/s [ 0.392865] raid6: altivecx4 gen() 5683 MB/s [ 0.449575] raid6: altivecx8 gen() 5661 MB/s [ 0.506334] raid6: int64x1 gen() 1470 MB/s [ 0.563019] raid6: int64x1 xor() 754 MB/s [ 0.619745] raid6: int64x2 gen() 1959 MB/s [ 0.676465] raid6: int64x2 xor() 1279 MB/s [ 0.733177] raid6: int64x4 gen() 2205 MB/s [ 0.789880] raid6: int64x4 xor() 1577 MB/s [ 0.846618] raid6: int64x8 gen() 2463 MB/s [ 0.903328] raid6: int64x8 xor() 1571 MB/s [ 0.903331] raid6: using algorithm altivecx4 gen() 5683 MB/s [ 0.903334] raid6: using intx1 recovery algorithm [ 0.903474] pci 0000:f0:10.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none [ 0.903499] pci 0000:f0:10.0: vgaarb: bridge control possible [ 0.903503] pci 0000:f0:10.0: vgaarb: setting as boot device (VGA legacy resources not available) [ 0.903507] vgaarb: loaded [ 0.903598] SCSI subsystem initialized [ 0.903698] libata version 3.00 loaded. [ 0.903717] EDAC MC: Ver: 3.0.0 [ 0.904122] clocksource: Switched to clocksource timebase [ 0.909249] NET: Registered protocol family 2 [ 0.909580] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.909910] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.911217] TCP: Hash tables configured (established 65536 bind 65536) [ 0.911347] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.911450] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.911656] NET: Registered protocol family 1 [ 0.911688] PCI: CLS mismatch (32 != 64), using 128 bytes [ 0.911699] pci 0001:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.911705] pci 0001:00:01.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC [ 0.911710] pci 0001:00:02.0: MSI quirk detected; subordinate MSI disabled [ 0.911715] pci 0001:00:02.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC [ 0.911751] pci 0001:01:08.0: enabling device (0000 -> 0002) [ 0.967504] pci 0001:01:09.0: enabling device (0000 -> 0002) [ 1.024138] pci 0001:02:0b.0: enabling device (0000 -> 0002) [ 1.080799] pci 0001:02:0b.1: enabling device (0000 -> 0002) [ 1.137464] pci 0001:02:0b.2: enabling device (0004 -> 0006) [ 1.138134] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.141754] NET: Registered protocol family 38 [ 1.141829] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.141834] io scheduler noop registered [ 1.141836] io scheduler deadline registered (default) [ 1.142420] MacIO PCI driver attached to K2 chipset [ 1.143369] sata_svw 0001:05:0c.0: version 2.3 [ 1.144011] scsi host0: sata_svw [ 1.144267] scsi host1: sata_svw [ 1.144413] scsi host2: sata_svw [ 1.144557] scsi host3: sata_svw [ 1.144623] ata1: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600000 irq 17 [ 1.144629] ata2: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600100 irq 17 [ 1.144635] ata3: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600200 irq 17 [ 1.144639] ata4: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600300 irq 17 [ 1.144732] pata-pci-macio 0001:03:0d.0: enabling device (0014 -> 0016) [ 1.160799] pata-pci-macio 0001:03:0d.0: Activating pata-macio chipset K2 ATA-6, Apple bus ID 3 [ 1.161122] scsi host4: pata_macio [ 1.161195] ata5: PATA max UDMA/100 irq 39 [ 1.161644] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 1.199776] pmac64_cpufreq: Registering G5 CPU frequency driver [ 1.199784] pmac64_cpufreq: Frequency method: i2c/pfunc, Voltage method: i2c/pfunc [ 1.199789] pmac64_cpufreq: Low: 1800 Mhz, High: 2300 Mhz, Cur: 1800 MHz [ 1.200267] NET: Registered protocol family 10 [ 1.200808] Segment Routing with IPv6 [ 1.201146] registered taskstats version 1 [ 1.201877] Btrfs loaded, crc32c=crc32c-generic [ 1.201923] BTRFS: selftest: sectorsize: 4096 nodesize: 4096 [ 1.201926] BTRFS: selftest: Running btrfs free space cache tests [ 1.201943] BTRFS: selftest: Running extent only tests [ 1.201959] BTRFS: selftest: Running bitmap only tests [ 1.201974] BTRFS: selftest: Running bitmap and extent tests [ 1.201988] BTRFS: selftest: Running space stealing from bitmap to extent [ 1.202582] BTRFS: selftest: Free space cache tests finished [ 1.202586] BTRFS: selftest: Running extent buffer operation tests [ 1.202589] BTRFS: selftest: Running btrfs_split_item tests [ 1.202620] BTRFS: selftest: Running extent I/O tests [ 1.202623] BTRFS: selftest: Running find delalloc tests [ 1.320197] ata5.00: ATAPI: LITE-ON DVDRW SOHW-1693S, KS0B, max UDMA/66 [ 1.325016] ata5.00: configured for UDMA/66 [ 1.414836] BTRFS: selftest: Running extent buffer bitmap tests [ 1.426823] BTRFS: selftest: Bits do not match [ 1.426826] BTRFS: selftest: Setting straddling pages failed [ 1.426833] BTRFS: selftest: Extent I/O tests finished [ 1.468076] ata1: SATA link down (SStatus 4 SControl 300) [ 1.484785] input: PMU as /devices/virtual/input/input0 [ 1.485885] Duplicate name in testcase-data, renamed to "duplicate-name#1" [ 1.487564] ### dt-test ### start of unittest - you will see error messages [ 1.488029] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1 [ 1.488040] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1 [ 1.488054] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle [ 1.488065] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle [ 1.488075] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property [ 1.488085] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property [ 1.491226] OF: overlay: node_overlaps_later_cs: #6 overlaps with #7 @/testcase-data/overlay-node/test-bus/test-unittest8 [ 1.491237] OF: overlay: overlay #6 is not topmost [ 1.494827] ### dt-test ### of_overlay_apply() (ret=-22), 2 [ 1.494925] ### dt-test ### of_overlay_apply() (ret=-22), 3 [ 1.494929] ### dt-test ### end of unittest - 190 passed, 0 failed [ 1.780489] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.914142] ata2.00: ATA-9: WDC WD5000AZRZ-00HTKB0, 01.01A01, max UDMA/133 [ 6.914147] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 6.916993] ata2.00: configured for UDMA/133 [ 6.917209] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AZRZ-0 1A01 PQ: 0 ANSI: 5 [ 6.917718] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 6.917730] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 6.917755] sd 1:0:0:0: [sda] Write Protect is off [ 6.917761] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.917794] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.951039] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 [ 6.952126] sd 1:0:0:0: [sda] Attached SCSI disk [ 7.241440] ata3: SATA link down (SStatus 4 SControl 300) [ 7.564716] ata4: SATA link down (SStatus 4 SControl 300) [ 7.565662] scsi 4:0:0:0: CD-ROM LITE-ON DVDRW SOHW-1693S KS0B PQ: 0 ANSI: 5 [ 7.565684] ata5.00: K2/Shasta alignment limits applied [ 7.616029] EXT4-fs (sda8): couldn't mount as ext3 due to feature incompatibilities [ 7.616365] EXT4-fs (sda8): couldn't mount as ext2 due to feature incompatibilities [ 7.642281] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 7.642318] VFS: Mounted root (ext4 filesystem) readonly on device 8:8. [ 7.642648] Freeing unused kernel memory: 384K [ 7.642655] This architecture does not have kernel memory protection. [ 49.454147] sd 1:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06 [ 49.454158] sd 1:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 1e 24 19 10 00 00 08 00 [ 49.454162] print_req_error: I/O error, dev sda, sector 505682192 [ 50.560970] systemd[1]: systemd 233 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN default-hierarchy=hybrid) [ 50.561262] systemd[1]: Detected architecture ppc64. [ 50.570921] systemd[1]: Set hostname to . [ 51.695628] random: crng init done [ 54.372509] systemd[1]: Listening on udev Control Socket. [ 54.373235] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 54.373552] systemd[1]: Listening on Journal Socket (/dev/log). [ 54.373795] systemd[1]: Listening on udev Kernel Socket. [ 65.403871] systemd[1]: Created slice System Slice. [ 65.404376] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 65.406604] systemd[1]: Mounting Huge Pages File System... [ 65.407248] systemd[1]: Listening on Network Service Netlink Socket. [ 65.408290] systemd[1]: Created slice system-getty.slice. [ 65.408681] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 65.426136] systemd[1]: Listening on Process Core Dump Socket. [ 65.426578] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 65.426810] systemd[1]: Reached target Paths. [ 65.426982] systemd[1]: Reached target Encrypted Volumes. [ 65.807473] PowerMac i2c bus pmu 2 registered [ 65.807572] PowerMac i2c bus pmu 1 registered [ 65.807646] PowerMac i2c bus mac-io 0 registered [ 65.808174] PowerMac i2c bus u3 1 registered [ 65.808296] i2c i2c-3: i2c-powermac: modalias failure on /u3@0,f8000000/i2c@f8001000/cereal@1c0 [ 65.808364] PowerMac i2c bus u3 0 registered [ 66.024503] zram: Added device: zram0 [ 66.024733] zram: Added device: zram1 [ 66.024949] zram: Added device: zram2 [ 66.342398] zram0: detected capacity change from 0 to 2147483648 [ 66.399905] Adding 2097148k swap on /dev/zram0. Priority:16383 extents:1 across:2097148k SS [ 89.132844] EXT4-fs (sda8): re-mounted. Opts: (null) [ 89.197514] systemd-journald[82]: Received request to flush runtime journal from PID 1 [ 89.230717] systemd-journald[82]: File /var/log/journal/a11f6dbd63d44c20941f9f48a8fbb3e4/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 91.449060] snd-aoa-codec-tas: tas found, addr 0x35 on /ht@0,f2000000/pci@3/mac-io@7/i2c@18000/deq@6a [ 91.480549] shpchp 0001:00:01.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 91.480571] shpchp 0001:00:01.0: Cannot reserve MMIO region [ 91.480590] shpchp 0001:00:02.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 91.480596] shpchp 0001:00:02.0: Cannot reserve MMIO region [ 91.480700] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 91.482827] Linux agpgart interface v0.103 [ 91.488327] agpgart-uninorth 0000:f0:0b.0: Apple U3H chipset [ 91.499388] agpgart-uninorth 0000:f0:0b.0: configuring for size idx: 64 [ 91.499592] agpgart-uninorth 0000:f0:0b.0: AGP aperture is 256M @ 0x0 [ 91.556280] usbcore: registered new interface driver usbfs [ 91.556328] usbcore: registered new interface driver hub [ 91.556400] usbcore: registered new device driver usb [ 91.565971] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 91.568111] sungem.c:v1.0 David S. Miller [ 91.570699] gem 0001:04:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0d:93:62:f2:38 [ 91.587642] ehci-pci: EHCI PCI platform driver [ 91.587776] ehci-pci 0001:02:0b.2: EHCI Host Controller [ 91.587796] ehci-pci 0001:02:0b.2: new USB bus registered, assigned bus number 1 [ 91.587886] ehci-pci 0001:02:0b.2: irq 63, io mem 0x80100000 [ 91.589374] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 91.596540] firewire_ohci 0001:03:0e.0: enabling device (0000 -> 0002) [ 91.600821] ehci-pci 0001:02:0b.2: USB 2.0 started, EHCI 1.00 [ 91.601294] hub 1-0:1.0: USB hub found [ 91.601321] hub 1-0:1.0: 5 ports detected [ 91.605199] ohci-pci: OHCI PCI platform driver [ 91.605285] ohci-pci 0001:01:08.0: OHCI PCI host controller [ 91.605300] ohci-pci 0001:01:08.0: new USB bus registered, assigned bus number 2 [ 91.605361] ohci-pci 0001:01:08.0: irq 27, io mem 0x80081000 [ 91.618878] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 91.618898] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 91.619127] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 91.650853] firewire_ohci 0001:03:0e.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 91.681106] hub 2-0:1.0: USB hub found [ 91.681142] hub 2-0:1.0: 2 ports detected [ 91.681412] ohci-pci 0001:01:09.0: OHCI PCI host controller [ 91.681427] ohci-pci 0001:01:09.0: new USB bus registered, assigned bus number 3 [ 91.681477] ohci-pci 0001:01:09.0: irq 28, io mem 0x80080000 [ 91.757904] hub 3-0:1.0: USB hub found [ 91.757938] hub 3-0:1.0: 2 ports detected [ 91.758303] ohci-pci 0001:02:0b.0: OHCI PCI host controller [ 91.758321] ohci-pci 0001:02:0b.0: new USB bus registered, assigned bus number 4 [ 91.758366] ohci-pci 0001:02:0b.0: irq 63, io mem 0x80102000 [ 91.834527] hub 4-0:1.0: USB hub found [ 91.834570] hub 4-0:1.0: 3 ports detected [ 91.834969] ohci-pci 0001:02:0b.1: OHCI PCI host controller [ 91.834988] ohci-pci 0001:02:0b.1: new USB bus registered, assigned bus number 5 [ 91.835033] ohci-pci 0001:02:0b.1: irq 63, io mem 0x80101000 [ 91.911122] hub 5-0:1.0: USB hub found [ 91.911152] hub 5-0:1.0: 2 ports detected [ 91.934135] usb 1-4: new high-speed USB device number 2 using ehci-pci [ 92.072774] [drm] radeon kernel modesetting enabled. [ 92.072931] radeon 0000:f0:10.0: enabling device (0086 -> 0087) [ 92.073201] [drm] initializing kernel modesetting (R350 0x1002:0x4E48 0x1002:0x4E48 0x00). [ 92.073290] radeon 0000:f0:10.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000 [ 92.085693] hub 1-4:1.0: USB hub found [ 92.085892] hub 1-4:1.0: 4 ports detected [ 92.161086] [drm] Not an x86 BIOS ROM, not using. [ 92.161154] [drm] Using device-tree clock info [ 92.161196] agpgart-uninorth 0000:f0:0b.0: putting AGP V3 device into 8x mode [ 92.161206] radeon 0000:f0:10.0: putting AGP V3 device into 8x mode [ 92.161287] radeon 0000:f0:10.0: GTT: 256M 0x00000000 - 0x0FFFFFFF [ 92.161299] radeon 0000:f0:10.0: VRAM: 256M 0x00000000A0000000 - 0x00000000AFFFFFFF (256M used) [ 92.161314] [drm] Detected VRAM RAM=256M, BAR=256M [ 92.161317] [drm] RAM width 256bits DDR [ 92.161476] [TTM] Zone kernel: Available graphics memory: 4027240 kiB [ 92.161480] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 92.161487] [TTM] Initializing pool allocator [ 92.161574] [drm] radeon: 256M of VRAM memory ready [ 92.161577] [drm] radeon: 256M of GTT memory ready. [ 92.161608] [drm] radeon: 2 quad pipes, 1 Z pipes initialized [ 92.161752] radeon 0000:f0:10.0: WB disabled [ 92.161767] radeon 0000:f0:10.0: fence driver on ring 0 use gpu addr 0x0000000000000000 and cpu addr 0x00000000b5385bb3 [ 92.161781] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 92.161784] [drm] Driver supports precise vblank timestamp query. [ 92.161821] [drm] radeon: irq initialized. [ 92.161825] [drm] Loading R300 Microcode [ 92.167656] firewire_core 0001:03:0e.0: created device fw0: GUID 000d93fffe62f238, S800 [ 92.215405] [drm] radeon: ring at 0x0000000000001000 [ 92.215449] [drm] ring test succeeded in 0 usecs [ 92.215701] [drm] ib test succeeded in 0 usecs [ 92.216048] [drm] Connector Table: 1 (generic) [ 92.216066] [drm] No TMDS info found in BIOS [ 92.216074] [drm] No TV DAC info found in BIOS [ 92.216229] [drm] Radeon Display Connectors [ 92.216233] [drm] Connector 0: [ 92.216236] [drm] DVI-I-1 [ 92.216238] [drm] HPD1 [ 92.216241] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 92.216244] [drm] Encoders: [ 92.216246] [drm] DFP1: INTERNAL_TMDS1 [ 92.216249] [drm] CRT2: INTERNAL_DAC2 [ 92.216251] [drm] Connector 1: [ 92.216253] [drm] VGA-1 [ 92.216256] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 92.216258] [drm] Encoders: [ 92.216261] [drm] CRT1: INTERNAL_DAC1 [ 92.216263] [drm] Connector 2: [ 92.216265] [drm] SVIDEO-1 [ 92.216267] [drm] Encoders: [ 92.216269] [drm] TV1: INTERNAL_DAC2 [ 92.329732] [drm] fb mappable at 0xA0040000 [ 92.329744] [drm] vram apper at 0xA0000000 [ 92.329747] [drm] size 8294400 [ 92.329750] [drm] fb depth is 24 [ 92.329752] [drm] pitch is 7680 [ 92.381002] Console: switching to colour frame buffer device 240x67 [ 92.420715] radeon 0000:f0:10.0: fb0: radeondrmfb frame buffer device [ 92.421548] [drm] Initialized radeon 2.50.0 20080528 for 0000:f0:10.0 on minor 0 [ 92.465702] windfarm: Initializing for desktop G5 with 2 chips [ 92.480807] usb 1-4.3: new low-speed USB device number 3 using ehci-pci [ 92.546453] windfarm: CPUs control loops started. [ 92.546614] wf_pm72: Backside control loop started. [ 92.546717] wf_pm72: Drive bay control loop started. [ 92.659848] gem 0001:04:0f.0 enP1p4s15f0: renamed from eth0 [ 92.700816] usb 1-4.4: new full-speed USB device number 4 using ehci-pci [ 92.916512] snd-aoa-fabric-layout: Using PMF GPIOs [ 92.917100] snd-aoa-fabric-layout: can use this codec [ 93.119659] Adding 8391612k swap on /dev/sda2. Priority:-2 extents:1 across:8391612k [ 93.430885] hidraw: raw HID events driver (C) Jiri Kosina [ 93.523981] usbcore: registered new interface driver usbhid [ 93.524146] usbhid: USB HID core driver [ 93.585201] input: HID 046a:010d as /devices/pci0001:00/0001:00:04.0/0001:02:0b.2/usb1/1-4/1-4.3/1-4.3:1.0/0003:046A:010D.0001/input/input1 [ 93.644657] hid-generic 0003:046A:010D.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:010d] on usb-0001:02:0b.2-4.3/input0 [ 93.645713] input: HID 046a:010d as /devices/pci0001:00/0001:00:04.0/0001:02:0b.2/usb1/1-4/1-4.3/1-4.3:1.1/0003:046A:010D.0002/input/input2 [ 93.708320] hid-generic 0003:046A:010D.0002: input,hidraw1: USB HID v1.11 Device [HID 046a:010d] on usb-0001:02:0b.2-4.3/input1 [ 93.709148] input: Logitech G100s Optical Gaming Mouse as /devices/pci0001:00/0001:00:04.0/0001:02:0b.2/usb1/1-4/1-4.4/1-4.4:1.0/0003:046D:C247.0003/input/input3 [ 93.712676] hid-generic 0003:046D:C247.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech G100s Optical Gaming Mouse] on usb-0001:02:0b.2-4.4/input0 [ 95.099828] EXT4-fs (sda4): mounting ext2 file system using the ext4 subsystem [ 95.110753] EXT4-fs (sda4): mounted filesystem without journal. Opts: (null) [ 95.971731] zram1: detected capacity change from 0 to 8724152320 [ 96.867009] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard [ 121.875955] IPv6: ADDRCONF(NETDEV_UP): enP1p4s15f0: link is not ready [ 121.941097] sungem_phy: PHY ID: 2062e0, addr: 1 [ 121.941354] gem 0001:04:0f.0 enP1p4s15f0: Found BCM5421-K2 PHY [ 121.952861] IPv6: ADDRCONF(NETDEV_UP): enP1p4s15f0: link is not ready [ 125.607589] gem 0001:04:0f.0 enP1p4s15f0: Link is up at 1000 Mbps, full-duplex [ 125.618181] gem 0001:04:0f.0 enP1p4s15f0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632) [ 125.628762] IPv6: ADDRCONF(NETDEV_CHANGE): enP1p4s15f0: link becomes ready [ 126.223879] NET: Registered protocol family 17 [ 126.448588] RPC: Registered named UNIX socket transport module. [ 126.459489] RPC: Registered udp transport module. [ 126.470024] RPC: Registered tcp transport module. [ 126.480256] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 126.527542] Key type dns_resolver registered [ 126.547250] NFS: Registering the id_resolver key type [ 126.557007] Key type id_resolver registered [ 126.566399] Key type id_legacy registered [ 139.582561] usb 1-4: USB disconnect, device number 2 [ 139.582570] usb 1-4.3: USB disconnect, device number 3 [ 139.634740] usb 1-4.4: USB disconnect, device number 4 [ 4745.690057] gem 0001:04:0f.0 enP1p4s15f0: RX MAC fifo overflow smac[03910440] [ 4747.165805] gem 0001:04:0f.0 enP1p4s15f0: RX MAC fifo overflow smac[03810440] [ 4765.955497] gem 0001:04:0f.0 enP1p4s15f0: RX MAC fifo overflow smac[03810440] [ 7258.379154] usb 1-4: new high-speed USB device number 5 using ehci-pci [ 7258.527455] hub 1-4:1.0: USB hub found [ 7258.527803] hub 1-4:1.0: 4 ports detected [ 7258.825797] usb 1-4.3: new low-speed USB device number 6 using ehci-pci [ 7258.968309] input: HID 046a:010d as /devices/pci0001:00/0001:00:04.0/0001:02:0b.2/usb1/1-4/1-4.3/1-4.3:1.0/0003:046A:010D.0004/input/input4 [ 7259.022699] hid-generic 0003:046A:010D.0004: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:010d] on usb-0001:02:0b.2-4.3/input0 [ 7259.028505] input: HID 046a:010d as /devices/pci0001:00/0001:00:04.0/0001:02:0b.2/usb1/1-4/1-4.3/1-4.3:1.1/0003:046A:010D.0005/input/input5 [ 7259.082664] hid-generic 0003:046A:010D.0005: input,hidraw1: USB HID v1.11 Device [HID 046a:010d] on usb-0001:02:0b.2-4.3/input1 [ 7259.172444] usb 1-4.4: new full-speed USB device number 7 using ehci-pci [ 7259.292158] input: Logitech G100s Optical Gaming Mouse as /devices/pci0001:00/0001:00:04.0/0001:02:0b.2/usb1/1-4/1-4.4/1-4.4:1.0/0003:046D:C247.0006/input/input6 [ 7259.292345] hid-generic 0003:046D:C247.0006: input,hidraw2: USB HID v1.10 Mouse [Logitech G100s Optical Gaming Mouse] on usb-0001:02:0b.2-4.4/input0 [ 7282.532955] fuse init (API version 7.26) [ 7878.816368] usb 1-4: USB disconnect, device number 5 [ 7878.816379] usb 1-4.3: USB disconnect, device number 6 [ 7878.883154] usb 1-4.4: USB disconnect, device number 7 [ 9841.381794] usb 1-4: new high-speed USB device number 8 using ehci-pci [ 9841.536383] hub 1-4:1.0: USB hub found [ 9841.536570] hub 1-4:1.0: 4 ports detected [ 9841.831719] usb 1-4.3: new low-speed USB device number 9 using ehci-pci [ 9841.977545] input: HID 046a:010d as /devices/pci0001:00/0001:00:04.0/0001:02:0b.2/usb1/1-4/1-4.3/1-4.3:1.0/0003:046A:010D.0007/input/input7 [ 9842.031957] hid-generic 0003:046A:010D.0007: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:010d] on usb-0001:02:0b.2-4.3/input0 [ 9842.037492] input: HID 046a:010d as /devices/pci0001:00/0001:00:04.0/0001:02:0b.2/usb1/1-4/1-4.3/1-4.3:1.1/0003:046A:010D.0008/input/input8 [ 9842.091975] hid-generic 0003:046A:010D.0008: input,hidraw1: USB HID v1.11 Device [HID 046a:010d] on usb-0001:02:0b.2-4.3/input1 [ 9842.185048] usb 1-4.4: new full-speed USB device number 10 using ehci-pci [ 9842.308411] input: Logitech G100s Optical Gaming Mouse as /devices/pci0001:00/0001:00:04.0/0001:02:0b.2/usb1/1-4/1-4.4/1-4.4:1.0/0003:046D:C247.0009/input/input9 [ 9842.308613] hid-generic 0003:046D:C247.0009: input,hidraw2: USB HID v1.10 Mouse [Logitech G100s Optical Gaming Mouse] on usb-0001:02:0b.2-4.4/input0