[ 0.000000] microcode: CPU0 microcode updated early to revision 0x29, date = 2013-06-12 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.120-1-MANJARO (builduser@development) (gcc version 7.3.0 (GCC) ) #1 SMP PREEMPT Sun Mar 4 20:40:08 UTC 2018 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4-x86_64 root=UUID=58d59717-1f2b-4a05-8608-8846978047cf rw raw drm.debug=0xe resume=UUID=a43566b3-c588-44d3-9323-c9a4c4e8e1b0 [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000009ed78fff] usable [ 0.000000] BIOS-e820: [mem 0x000000009ed79000-0x000000009edc1fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009edc2000-0x000000009edc9fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009edca000-0x000000009edfffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009ee00000-0x000000009ee0dfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009ee0e000-0x000000009ee34fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009ee35000-0x000000009ee77fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009ee78000-0x000000009effffff] usable [ 0.000000] BIOS-e820: [mem 0x000000009f800000-0x00000000bf9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002405fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: J2 Retail Systems To be filled /C92, BIOS C92HVJ22(C92H-032) 06/25/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x240600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FC0000000 write-back [ 0.000000] 2 base 240000000 mask FFFC00000 write-back [ 0.000000] 3 base 240400000 mask FFFE00000 write-back [ 0.000000] 4 base 09F800000 mask FFF800000 uncachable [ 0.000000] 5 base 0A0000000 mask FE0000000 uncachable [ 0.000000] 6 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0x9f800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fcd10-0x000fcd1f] mapped at [ffff8800000fcd10] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 28672 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] BRK [0x01b4d000, 0x01b4dfff] PGTABLE [ 0.000000] BRK [0x01b4e000, 0x01b4efff] PGTABLE [ 0.000000] BRK [0x01b4f000, 0x01b4ffff] PGTABLE [ 0.000000] BRK [0x01b50000, 0x01b50fff] PGTABLE [ 0.000000] BRK [0x01b51000, 0x01b51fff] PGTABLE [ 0.000000] BRK [0x01b52000, 0x01b52fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x36fbb000-0x377d4fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x000000009EDC2068 00004C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x000000009EDC9140 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x000000009EDC2140 006FFC (v02 ALASKA A M I 00000032 INTL 20051117) [ 0.000000] ACPI: FACS 0x000000009EE05F80 000040 [ 0.000000] ACPI: APIC 0x000000009EDC9238 000072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x000000009EDC92B0 000102 (v01 AMICPU PROC 00000001 MSFT 03000001) [ 0.000000] ACPI: MCFG 0x000000009EDC93B8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x000000009EDC93F8 000038 (v01 ALASKA A M I 01072009 AMI. 00000004) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000002405fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x2405f5000-0x2405f8fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000002405fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff] [ 0.000000] node 0: [mem 0x0000000040200000-0x000000009ed78fff] [ 0.000000] node 0: [mem 0x000000009ee78000-0x000000009effffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002405fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000002405fffff] [ 0.000000] On node 0 totalpages: 1962141 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10093 pages used for memmap [ 0.000000] DMA32 zone: 645889 pages, LIFO batch:31 [ 0.000000] Normal zone: 20504 pages used for memmap [ 0.000000] Normal zone: 1312256 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0x9fa00000-0xbf9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9ed79000-0x9edc1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x9edc2000-0x9edc9fff] [ 0.000000] PM: Registered nosave memory: [mem 0x9edca000-0x9edfffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9ee00000-0x9ee0dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x9ee0e000-0x9ee34fff] [ 0.000000] PM: Registered nosave memory: [mem 0x9ee35000-0x9ee77fff] [ 0.000000] PM: Registered nosave memory: [mem 0x9f000000-0x9f7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9f800000-0xbf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xbfa00000-0xfed1bfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff880240200000 s93976 r8192 d28904 u524288 [ 0.000000] pcpu-alloc: s93976 r8192 d28904 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1931324 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4-x86_64 root=UUID=58d59717-1f2b-4a05-8608-8846978047cf rw raw drm.debug=0xe resume=UUID=a43566b3-c588-44d3-9323-c9a4c4e8e1b0 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7636260K/7848564K available (5903K kernel code, 974K rwdata, 1852K rodata, 1216K init, 1156K bss, 212304K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:8448 nr_irqs:456 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3292.617 MHz processor [ 0.000033] Calibrating delay loop (skipped), value calculated using timer frequency.. 6587.61 BogoMIPS (lpj=10975390) [ 0.000034] pid_max: default: 32768 minimum: 301 [ 0.000039] ACPI: Core revision 20150930 [ 0.002804] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.002819] Security Framework initialized [ 0.002821] Yama: becoming mindful. [ 0.003183] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.004406] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004936] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004945] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.005103] Initializing cgroup subsys io [ 0.005106] Initializing cgroup subsys memory [ 0.005110] Initializing cgroup subsys devices [ 0.005112] Initializing cgroup subsys freezer [ 0.005113] Initializing cgroup subsys net_cls [ 0.005115] Initializing cgroup subsys pids [ 0.005131] CPU: Physical Processor ID: 0 [ 0.005132] CPU: Processor Core ID: 0 [ 0.005135] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.005136] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.005138] mce: CPU supports 7 MCE banks [ 0.005147] CPU0: Thermal monitoring enabled (TM1) [ 0.005152] process: using mwait in idle threads [ 0.005154] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.005155] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.005157] Spectre V2 : Mitigation: Full generic retpoline [ 0.005460] Freeing SMP alternatives memory: 20K [ 0.006411] ftrace: allocating 23170 entries in 91 pages [ 0.022036] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.055047] TSC deadline timer enabled [ 0.055052] smpboot: CPU0: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.055071] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.055087] ... version: 3 [ 0.055088] ... bit width: 48 [ 0.055089] ... generic registers: 4 [ 0.055090] ... value mask: 0000ffffffffffff [ 0.055091] ... max period: 00007fffffffffff [ 0.055092] ... fixed-purpose events: 3 [ 0.055093] ... event mask: 000000070000000f [ 0.085096] x86: Booting SMP configuration: [ 0.085100] .... node #0, CPUs: #1 [ 0.085600] microcode: CPU1 microcode updated early to revision 0x29, date = 2013-06-12 [ 0.087727] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.095110] #2 #3 [ 0.107555] x86: Booted up 1 node, 4 CPUs [ 0.107558] smpboot: Total of 4 processors activated (26351.47 BogoMIPS) [ 0.110043] devtmpfs: initialized [ 0.112012] PM: Registering ACPI NVS region [mem 0x9ed79000-0x9edc1fff] (299008 bytes) [ 0.112017] PM: Registering ACPI NVS region [mem 0x9ee00000-0x9ee0dfff] (57344 bytes) [ 0.112019] PM: Registering ACPI NVS region [mem 0x9ee35000-0x9ee77fff] (274432 bytes) [ 0.112086] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.112094] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.112169] pinctrl core: initialized pinctrl subsystem [ 0.112236] RTC time: 23:17:33, date: 03/14/18 [ 0.112320] NET: Registered protocol family 16 [ 0.123241] cpuidle: using governor ladder [ 0.139916] cpuidle: using governor menu [ 0.139970] ACPI: bus type PCI registered [ 0.139973] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.140050] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.140052] PCI: not using MMCONFIG [ 0.140053] PCI: Using configuration type 1 for base access [ 0.140233] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.153520] ACPI: Added _OSI(Module Device) [ 0.153521] ACPI: Added _OSI(Processor Device) [ 0.153523] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.153524] ACPI: Added _OSI(Processor Aggregator Device) [ 0.155120] ACPI: Executed 1 blocks of module-level executable AML code [ 0.156836] ACPI: Dynamic OEM Table Load: [ 0.156841] ACPI: SSDT 0xFFFF880236979800 0004D4 (v01 AMI IST 00000001 MSFT 03000001) [ 0.157171] ACPI: Dynamic OEM Table Load: [ 0.157174] ACPI: SSDT 0xFFFF88023699F200 0000E4 (v01 AMI CST 00000001 MSFT 03000001) [ 0.157868] ACPI: Interpreter enabled [ 0.157879] ACPI: (supports S0 S1 S3 S5) [ 0.157880] ACPI: Using IOAPIC for interrupt routing [ 0.157905] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.157945] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.157949] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override. [ 0.158168] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.158342] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.162813] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.162818] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.162947] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.163173] PCI host bridge to bus 0000:00 [ 0.163176] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.163177] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.163179] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.163181] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.163182] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.163184] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.163185] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff window] [ 0.163187] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.163194] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000 [ 0.163268] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000 [ 0.163279] pci 0000:00:02.0: reg 0x10: [mem 0xfe000000-0xfe3fffff 64bit] [ 0.163285] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.163288] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.163373] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.163402] pci 0000:00:19.0: reg 0x10: [mem 0xfe400000-0xfe41ffff] [ 0.163412] pci 0000:00:19.0: reg 0x14: [mem 0xfe428000-0xfe428fff] [ 0.163422] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.163474] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.163505] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.163544] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.163576] pci 0000:00:1a.0: reg 0x10: [mem 0xfe427000-0xfe4273ff] [ 0.163650] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.163717] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.163745] pci 0000:00:1b.0: reg 0x10: [mem 0xfe420000-0xfe423fff 64bit] [ 0.163809] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.163876] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.163906] pci 0000:00:1d.0: reg 0x10: [mem 0xfe426000-0xfe4263ff] [ 0.163978] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.164010] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.164054] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100 [ 0.164276] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 0.164301] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.164311] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.164321] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.164331] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.164338] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.164347] pci 0000:00:1f.2: reg 0x24: [mem 0xfe425000-0xfe4257ff] [ 0.164381] pci 0000:00:1f.2: PME# supported from D3hot [ 0.164442] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.164460] pci 0000:00:1f.3: reg 0x10: [mem 0xfe424000-0xfe4240ff 64bit] [ 0.164483] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.165258] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.165305] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.165352] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.165398] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.165447] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.165493] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.165541] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.165588] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.165636] ACPI: Enabled 3 GPEs in block 00 to 3F [ 0.165732] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.165734] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.165736] vgaarb: loaded [ 0.165737] vgaarb: bridge control possible 0000:00:02.0 [ 0.165817] PCI: Using ACPI for IRQ routing [ 0.171839] PCI: pci_cache_line_size set to 64 bytes [ 0.171871] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.171872] e820: reserve RAM buffer [mem 0x9ed79000-0x9fffffff] [ 0.171874] e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff] [ 0.171875] e820: reserve RAM buffer [mem 0x240600000-0x243ffffff] [ 0.171959] NetLabel: Initializing [ 0.171961] NetLabel: domain hash size = 128 [ 0.171961] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.171971] NetLabel: unlabeled traffic allowed by default [ 0.171999] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.172004] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.174017] amd_nb: Cannot enumerate AMD northbridges [ 0.174031] clocksource: Switched to clocksource hpet [ 0.178106] pnp: PnP ACPI init [ 0.178205] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved [ 0.178208] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.178210] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.178211] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.178213] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.178217] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.178370] system 00:01: [io 0x0778-0x077f] has been reserved [ 0.178373] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.178410] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.178703] pnp 00:03: [dma 0 disabled] [ 0.178810] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.178953] pnp 00:04: [dma 0 disabled] [ 0.178990] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.179203] pnp 00:05: [dma 0 disabled] [ 0.179240] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.179453] ACPI: IRQ 11 override to edge, high [ 0.179498] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.179712] ACPI: IRQ 7 override to edge, high [ 0.179756] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.179965] ACPI: IRQ 6 override to edge, high [ 0.180007] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.180216] ACPI: IRQ 10 override to edge, high [ 0.180260] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.180279] pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.180315] system 00:0b: [io 0x04d0-0x04d1] has been reserved [ 0.180318] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.180434] system 00:0c: [io 0x0400-0x0453] has been reserved [ 0.180436] system 00:0c: [io 0x0458-0x047f] has been reserved [ 0.180438] system 00:0c: [io 0x1180-0x119f] has been reserved [ 0.180439] system 00:0c: [io 0x0480-0x04ff] could not be reserved [ 0.180442] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.180444] system 00:0c: [mem 0xfec00000-0xfecfffff] could not be reserved [ 0.180446] system 00:0c: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.180447] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved [ 0.180450] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.180489] system 00:0d: [io 0x0454-0x0457] has been reserved [ 0.180492] system 00:0d: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.180649] pnp: PnP ACPI: found 14 devices [ 0.187042] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.187051] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.187052] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.187054] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.187056] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.187057] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.187059] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.187061] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xffffffff window] [ 0.187085] NET: Registered protocol family 2 [ 0.187209] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.187308] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.187426] TCP: Hash tables configured (established 65536 bind 65536) [ 0.187449] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.187470] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.187518] NET: Registered protocol family 1 [ 0.187543] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling [ 0.187555] pci 0000:00:02.0: Video device with shadowed ROM [ 0.434145] PCI: CLS 64 bytes, default 64 [ 0.434187] Unpacking initramfs... [ 0.512889] Freeing initrd memory: 8296K [ 0.512899] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.512902] software IO TLB [mem 0x9ad79000-0x9ed79000] (64MB) mapped at [ffff88009ad79000-ffff88009ed78fff] [ 0.512958] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 0.512959] hw unit of domain pp0-core 2^-16 Joules [ 0.512960] hw unit of domain package 2^-16 Joules [ 0.512961] hw unit of domain pp1-gpu 2^-16 Joules [ 0.513071] Scanning for low memory corruption every 60 seconds [ 0.513520] Initialise system trusted keyring [ 0.513638] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.514738] zbud: loaded [ 0.514974] VFS: Disk quotas dquot_6.6.0 [ 0.514999] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.515119] Key type big_key registered [ 0.515417] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.515458] io scheduler noop registered [ 0.515460] io scheduler deadline registered [ 0.515481] io scheduler cfq registered [ 0.515502] io scheduler bfq registered (default) [ 0.515503] BFQ I/O-scheduler: v8r12 (with cgroups support) [ 0.515547] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.515552] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.515562] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 0.515563] vesafb: scrolling: redraw [ 0.515564] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.515572] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001000000, using 3072k, total 3072k [ 0.556281] Console: switching to colour frame buffer device 128x48 [ 0.596907] fb0: VESA VGA frame buffer device [ 0.596920] intel_idle: MWAIT substates: 0x1120 [ 0.596921] intel_idle: v0.4.1 model 0x2A [ 0.596922] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.597073] GHES: HEST is not enabled! [ 0.597124] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.618352] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.639612] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.660862] 00:06: ttyS2 at I/O 0x3e8 (irq = 11, base_baud = 115200) is a 16550A [ 0.682114] 00:07: ttyS3 at I/O 0x2e8 (irq = 7, base_baud = 115200) is a 16550A [ 0.682344] serial 00:08: disabled [ 0.682499] serial 00:09: disabled [ 0.682617] Linux agpgart interface v0.103 [ 0.682885] rtc_cmos 00:0a: RTC can wake from S4 [ 0.683137] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0 [ 0.683191] rtc_cmos 00:0a: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.683200] Intel P-state driver initializing. [ 0.683402] ledtrig-cpu: registered to indicate activity on CPUs [ 0.684045] NET: Registered protocol family 10 [ 0.684300] NET: Registered protocol family 17 [ 0.684589] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x29 [ 0.684633] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x29 [ 0.684649] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x29 [ 0.684698] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x29 [ 0.684799] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 0.685174] registered taskstats version 1 [ 0.685200] Loading compiled-in X.509 certificates [ 0.685226] zswap: loaded using pool lzo/zbud [ 0.685628] Magic number: 10:194:302 [ 0.685636] event_source uncore_imc: hash matches [ 0.685644] tty tty31: hash matches [ 0.685762] rtc_cmos 00:0a: setting system clock to 2018-03-14 23:17:33 UTC (1521069453) [ 0.685880] PM: Checking hibernation image partition UUID=a43566b3-c588-44d3-9323-c9a4c4e8e1b0 [ 0.685885] PM: Hibernation image not present or could not be loaded. [ 0.687562] Freeing unused kernel memory: 1216K [ 0.687565] Write protecting the kernel read-only data: 8192k [ 0.687826] Freeing unused kernel memory: 228K [ 0.688545] Freeing unused kernel memory: 196K [ 0.758998] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.759002] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.759577] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.768030] ACPI: bus type USB registered [ 0.768077] usbcore: registered new interface driver usbfs [ 0.768081] SCSI subsystem initialized [ 0.768100] usbcore: registered new interface driver hub [ 0.768140] usbcore: registered new device driver usb [ 0.768906] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.769178] ehci-pci: EHCI PCI platform driver [ 0.769369] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.769379] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.769403] ehci-pci 0000:00:1a.0: debug port 2 [ 0.773040] libata version 3.00 loaded. [ 0.773326] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.773350] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe427000 [ 0.780711] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.780995] hub 1-0:1.0: USB hub found [ 0.781009] hub 1-0:1.0: 2 ports detected [ 0.781441] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.781451] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.781474] ehci-pci 0000:00:1d.0: debug port 2 [ 0.785404] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.785428] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe426000 [ 0.794049] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.794339] hub 2-0:1.0: USB hub found [ 0.794352] hub 2-0:1.0: 2 ports detected [ 0.794541] ahci 0000:00:1f.2: version 3.0 [ 0.794731] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.807462] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.807467] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 0.828071] scsi host0: ahci [ 0.828247] scsi host1: ahci [ 0.828402] scsi host2: ahci [ 0.828568] scsi host3: ahci [ 0.828689] scsi host4: ahci [ 0.828844] scsi host5: ahci [ 0.828902] ata1: SATA max UDMA/133 abar m2048@0xfe425000 port 0xfe425100 irq 24 [ 0.828909] ata2: SATA max UDMA/133 abar m2048@0xfe425000 port 0xfe425180 irq 24 [ 0.828910] ata3: DUMMY [ 0.828912] ata4: DUMMY [ 0.828918] ata5: SATA max UDMA/133 abar m2048@0xfe425000 port 0xfe425300 irq 24 [ 0.828920] ata6: SATA max UDMA/133 abar m2048@0xfe425000 port 0xfe425380 irq 24 [ 0.833675] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.087438] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.100764] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.147437] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.149811] ata1.00: ATA-8: WDC WD6400BEVT-22A0RT0, 01.01A01, max UDMA/133 [ 1.149817] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.152443] ata1.00: configured for UDMA/133 [ 1.152800] scsi 0:0:0:0: Direct-Access ATA WDC WD6400BEVT-2 1A01 PQ: 0 ANSI: 5 [ 1.212005] hub 1-1:1.0: USB hub found [ 1.212177] hub 1-1:1.0: 4 ports detected [ 1.225139] hub 2-1:1.0: USB hub found [ 1.225300] hub 2-1:1.0: 6 ports detected [ 1.470759] ata2: SATA link down (SStatus 0 SControl 300) [ 1.477415] usb 1-1.1: new low-speed USB device number 3 using ehci-pci [ 1.490745] usb 2-1.4: new high-speed USB device number 3 using ehci-pci [ 1.514093] tsc: Refined TSC clocksource calibration: 3292.519 MHz [ 1.514098] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75b15e00d, max_idle_ns: 440795230147 ns [ 1.569618] hidraw: raw HID events driver (C) Jiri Kosina [ 1.572683] usbcore: registered new interface driver usbhid [ 1.572688] usbhid: USB HID core driver [ 1.573431] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:045E:00CB.0001/input/input1 [ 1.573538] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1a.0-1.1/input0 [ 1.637421] usb 1-1.2: new low-speed USB device number 4 using ehci-pci [ 1.654058] usb 2-1.5: new full-speed USB device number 4 using ehci-pci [ 1.733136] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:0750.0002/input/input2 [ 1.742597] input: eGalax Inc. eGalaxTouch EXC7200-7383v1.006 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:0EEF:7200.0003/input/input3 [ 1.784195] hid-generic 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:1a.0-1.2/input0 [ 1.784239] input: eGalax Inc. eGalaxTouch EXC7200-7383v1.006 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:0EEF:7200.0003/input/input4 [ 1.784467] hid-multitouch 0003:0EEF:7200.0003: input,hiddev0,hidraw2: USB HID v2.10 Pointer [eGalax Inc. eGalaxTouch EXC7200-7383v1.006 ] on usb-0000:00:1d.0-1.5/input0 [ 1.790443] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:045E:0750.0004/input/input6 [ 1.797402] ata5: SATA link down (SStatus 0 SControl 300) [ 1.807381] usb 2-1.6: new low-speed USB device number 5 using ehci-pci [ 1.840806] hid-generic 0003:045E:0750.0004: input,hidraw3: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:1a.0-1.2/input1 [ 1.898638] input: usb gamepad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:0810:E501.0005/input/input7 [ 1.898729] hid-generic 0003:0810:E501.0005: input,hidraw4: USB HID v1.10 Joystick [usb gamepad ] on usb-0000:00:1d.0-1.6/input0 [ 2.117408] ata6: SATA link down (SStatus 0 SControl 300) [ 2.122585] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 2.122786] sd 0:0:0:0: [sda] Write Protect is off [ 2.122793] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.122873] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.188221] sda: sda1 sda2 [ 2.189320] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 2.514221] clocksource: Switched to clocksource tsc [ 2.774384] PM: Starting manual resume from disk [ 2.774391] PM: Hibernation image partition 8:2 present [ 2.774393] PM: Looking for hibernation image. [ 2.774785] PM: Image not found (code -22) [ 2.774789] PM: Hibernation image not present or could not be loaded. [ 3.154578] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.761580] random: nonblocking pool is initialized [ 4.825641] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.049040] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid) [ 5.049264] systemd[1]: Detected architecture x86-64. [ 5.094751] systemd[1]: Set hostname to . [ 6.148572] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 6.148579] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 6.948046] systemd[1]: Listening on udev Kernel Socket. [ 6.948968] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 6.949972] systemd[1]: Reached target Remote File Systems. [ 6.950835] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 6.951964] systemd[1]: Reached target Login Prompts. [ 6.952740] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 6.953732] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.954874] systemd[1]: Listening on Journal Socket. [ 6.967264] systemd[1]: Mounting POSIX Message Queue File System... [ 6.968853] systemd[1]: Mounting Huge Pages File System... [ 6.970265] systemd[1]: Mounting Kernel Debug File System... [ 6.971095] systemd[1]: Listening on LVM2 poll daemon socket. [ 6.971932] systemd[1]: Listening on LVM2 metadata daemon socket. [ 7.137398] systemd[1]: Starting Load Kernel Modules... [ 7.138423] systemd[1]: Created slice system-getty.slice. [ 7.139236] systemd[1]: Reached target Local Encrypted Volumes. [ 7.205327] systemd[1]: Listening on Process Core Dump Socket. [ 7.206312] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.331476] vboxdrv: loading out-of-tree module taints kernel. [ 7.335875] vboxdrv: Found 4 processor cores [ 7.353970] vboxdrv: TSC mode is Invariant, tentative frequency 3292518542 Hz [ 7.353973] vboxdrv: Successfully loaded version 5.2.8 (interface 0x00290001) [ 7.371614] VBoxNetAdp: Successfully started. [ 7.374031] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 7.375228] VBoxNetFlt: Successfully started. [ 7.375522] systemd[1]: Listening on udev Control Socket. [ 7.376531] VBoxPciLinuxInit [ 7.377300] systemd[1]: Starting udev Coldplug all Devices... [ 7.378885] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 7.380671] systemd[1]: Created slice User and Session Slice. [ 7.381505] systemd[1]: Reached target Slices. [ 7.382293] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.384267] systemd[1]: Starting Journal Service... [ 7.386079] systemd[1]: Starting Remount Root and Kernel File Systems... [ 7.387832] systemd[1]: Mounted POSIX Message Queue File System. [ 7.388706] systemd[1]: Mounted Huge Pages File System. [ 7.389444] systemd[1]: Mounted Kernel Debug File System. [ 7.397369] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 7.523114] systemd[1]: Started udev Coldplug all Devices. [ 7.625322] systemd[1]: Started Journal Service. [ 7.637482] EXT4-fs (sda1): re-mounted. Opts: (null) [ 8.014035] systemd-journald[185]: Received request to flush runtime journal from PID 1 [ 8.112237] vboxpci: IOMMU not found (not registered) [ 11.897733] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8 [ 11.897739] ACPI: Power Button [PWRB] [ 11.897793] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9 [ 11.897796] ACPI: Power Button [PWRF] [ 12.052880] input: PC Speaker as /devices/platform/pcspkr/input/input10 [ 12.214445] parport_pc 00:03: reported by Plug and Play ACPI [ 12.214581] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE] [ 12.276550] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004C9 (\GPIO) (20150930/utaddress-254) [ 12.276557] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.276560] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004C9 (\GPIO) (20150930/utaddress-254) [ 12.276564] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.276566] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004C9 (\GPIO) (20150930/utaddress-254) [ 12.276570] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.276571] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 12.280437] pps_core: LinuxPPS API ver. 1 registered [ 12.280441] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 12.478242] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 12.485270] PTP clock support registered [ 12.593373] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 12.710263] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 12.710267] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 12.710269] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 12.710271] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 12.710272] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 12.710274] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 12.710276] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 12.710277] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 12.771962] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 12.772344] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 12.772384] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 12.967624] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 12.967629] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 12.967934] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 13.266740] e1000e 0000:00:19.0 eth0: registered PHC clock [ 13.266747] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:60:ef:15:f9:65 [ 13.266751] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 13.266803] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 13.446341] ppdev: user-space parallel port driver [ 13.614006] iTCO_vendor_support: vendor-support=0 [ 13.895876] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 13.895920] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 13.896082] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 14.622266] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 14.846286] intel_rapl: Found RAPL domain package [ 14.846291] intel_rapl: Found RAPL domain core [ 14.846295] intel_rapl: Found RAPL domain uncore [ 14.846303] intel_rapl: RAPL package 0 domain package locked by BIOS [ 14.969264] [drm] Initialized drm 1.1.0 20060810 [ 14.970394] mousedev: PS/2 mouse device common for all mice [ 15.320096] [drm:i915_dump_device_info] i915 device info: gen=6, pciid=0x0102 rev=0x09 flags=need_gfx_hws,has_fbc,has_hotplug,has_llc, [ 15.320118] [drm:intel_detect_pch] Found CougarPoint PCH [ 15.320428] [drm] Memory usable by graphics device = 2048M [ 15.320439] [drm:i915_gem_gtt_init] GMADR size = 256M [ 15.320442] [drm:i915_gem_gtt_init] GTT stolen size = 512M [ 15.320444] [drm:i915_gem_gtt_init] ppgtt mode: 1 [ 15.320447] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 15.320449] fb: switching to inteldrmfb from VESA VGA [ 15.320478] Console: switching to colour dummy device 80x25 [ 15.320606] [drm] Replacing VGA console driver [ 15.321178] [drm:intel_opregion_setup] graphic opregion physical addr: 0x9ee00018 [ 15.321192] [drm:intel_opregion_setup] Public ACPI methods supported [ 15.321195] [drm:intel_opregion_setup] SWSCI supported [ 15.321378] i801_smbus 0000:00:1f.3: BIOS is accessing SMBus registers [ 15.321382] i801_smbus 0000:00:1f.3: Driver SMBus register access inhibited [ 15.326923] [drm:swsci_setup] SWSCI BIOS requested (00000241) SBCB callbacks that are not supported (00000041) [ 15.326929] [drm:swsci_setup] SWSCI GBDA callbacks 00000cf3, SBCB callbacks 00000241 [ 15.326932] [drm:intel_opregion_setup] ASLE supported [ 15.327070] [drm:intel_device_info_runtime_init] slice total: 0 [ 15.327073] [drm:intel_device_info_runtime_init] subslice total: 0 [ 15.327075] [drm:intel_device_info_runtime_init] subslice per slice: 0 [ 15.327076] [drm:intel_device_info_runtime_init] EU total: 0 [ 15.327078] [drm:intel_device_info_runtime_init] EU per subslice: 0 [ 15.327080] [drm:intel_device_info_runtime_init] has slice power gating: n [ 15.327082] [drm:intel_device_info_runtime_init] has subslice power gating: n [ 15.327084] [drm:intel_device_info_runtime_init] has EU power gating: n [ 15.327086] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 15.327087] [drm] Driver supports precise vblank timestamp query. [ 15.327090] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 15.327094] [drm:validate_vbt] Using VBT from OpRegion: $VBT SNB/IVB-DESKTOPd [ 15.327097] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 15.327099] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 15.327102] [drm:parse_lfp_panel_data] DRRS supported mode is static [ 15.327106] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 15.327110] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 0 85500 1366 1436 1580 1792 768 769 773 798 0x8 0xa [ 15.327112] [drm:parse_lfp_panel_data] VBT initial LVDS value 300 [ 15.327116] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 15.327120] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 15.327126] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 15.327129] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 15.327133] [drm:parse_driver_features] DRRS State Enabled:1 [ 15.327137] [drm:parse_psr] No PSR BDB found. [ 15.327155] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 15.327164] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 524288K, usable: 524288K [ 15.327169] [drm:intel_power_well_enable] enabling always-on [ 15.327541] [drm:intel_print_wm_latency] Primary WM0 latency 7 (0.7 usec) [ 15.327546] [drm:intel_print_wm_latency] Primary WM1 latency 3 (1.5 usec) [ 15.327549] [drm:intel_print_wm_latency] Primary WM2 latency 4 (2.0 usec) [ 15.327553] [drm:intel_print_wm_latency] Primary WM3 latency 22 (11.0 usec) [ 15.327557] [drm:intel_print_wm_latency] Sprite WM0 latency 7 (0.7 usec) [ 15.327561] [drm:intel_print_wm_latency] Sprite WM1 latency 3 (1.5 usec) [ 15.327564] [drm:intel_print_wm_latency] Sprite WM2 latency 4 (2.0 usec) [ 15.327568] [drm:intel_print_wm_latency] Sprite WM3 latency 22 (11.0 usec) [ 15.327572] [drm:intel_print_wm_latency] Cursor WM0 latency 7 (0.7 usec) [ 15.327575] [drm:intel_print_wm_latency] Cursor WM1 latency 3 (1.5 usec) [ 15.327579] [drm:intel_print_wm_latency] Cursor WM2 latency 4 (2.0 usec) [ 15.327583] [drm:intel_print_wm_latency] Cursor WM3 latency 22 (11.0 usec) [ 15.327586] [drm:snb_wm_latency_quirk] WM latency values increased to avoid potential underruns [ 15.327590] [drm:intel_print_wm_latency] Primary WM0 latency 12 (1.2 usec) [ 15.327594] [drm:intel_print_wm_latency] Primary WM1 latency 3 (1.5 usec) [ 15.327597] [drm:intel_print_wm_latency] Primary WM2 latency 4 (2.0 usec) [ 15.327601] [drm:intel_print_wm_latency] Primary WM3 latency 22 (11.0 usec) [ 15.327605] [drm:intel_print_wm_latency] Sprite WM0 latency 12 (1.2 usec) [ 15.327608] [drm:intel_print_wm_latency] Sprite WM1 latency 3 (1.5 usec) [ 15.327612] [drm:intel_print_wm_latency] Sprite WM2 latency 4 (2.0 usec) [ 15.327616] [drm:intel_print_wm_latency] Sprite WM3 latency 22 (11.0 usec) [ 15.327619] [drm:intel_print_wm_latency] Cursor WM0 latency 12 (1.2 usec) [ 15.327623] [drm:intel_print_wm_latency] Cursor WM1 latency 3 (1.5 usec) [ 15.327626] [drm:intel_print_wm_latency] Cursor WM2 latency 4 (2.0 usec) [ 15.327630] [drm:intel_print_wm_latency] Cursor WM3 latency 22 (11.0 usec) [ 15.327638] [drm:intel_modeset_init] 2 display pipes available. [ 15.327656] [drm:intel_update_cdclk] Current CD clock rate: 400000 kHz [ 15.327660] [drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz [ 15.327661] [drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz [ 15.327665] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 15.328039] [drm:intel_crt_reset] crt adpa set to 0xf40000 [ 15.328048] [drm:intel_hdmi_init_connector] Adding HDMI connector on port C [ 15.328055] [drm:intel_hdmi_ddc_pin] Using DDC pin 0x4 for port C (platform default) [ 15.328097] [drm:intel_hdmi_init_connector] Adding HDMI connector on port D [ 15.328102] [drm:intel_hdmi_ddc_pin] Using DDC pin 0x6 for port D (platform default) [ 15.328141] [drm:intel_dp_init_connector] Adding DP connector on port C [ 15.328178] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1 [ 15.328215] [drm:intel_dp_init_connector] Adding DP connector on port D [ 15.328253] [drm:intel_dp_aux_init] registering DPDDC-D bus for card0-DP-2 [ 15.328286] [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0 using_ssc_source 0 [ 15.328309] [drm:intel_modeset_readout_hw_state] [CRTC:21] hw state readout: enabled [ 15.328312] [drm:intel_modeset_readout_hw_state] [CRTC:25] hw state readout: disabled [ 15.328320] [drm:intel_modeset_readout_hw_state] PCH DPLL A hw state readout: crtc_mask 0x00000001, on 1 [ 15.328327] [drm:intel_modeset_readout_hw_state] PCH DPLL B hw state readout: crtc_mask 0x00000000, on 0 [ 15.328334] [drm:intel_modeset_readout_hw_state] [ENCODER:28:DAC-28] hw state readout: disabled, pipe A [ 15.328341] [drm:intel_modeset_readout_hw_state] [ENCODER:29:TMDS-29] hw state readout: disabled, pipe A [ 15.328347] [drm:intel_modeset_readout_hw_state] [ENCODER:34:TMDS-34] hw state readout: disabled, pipe A [ 15.328353] [drm:intel_modeset_readout_hw_state] [ENCODER:36:TMDS-36] hw state readout: disabled, pipe A [ 15.328365] [drm:intel_modeset_readout_hw_state] [ENCODER:38:TMDS-38] hw state readout: enabled, pipe A [ 15.328371] [drm:intel_modeset_readout_hw_state] [CONNECTOR:27:VGA-1] hw state readout: disabled [ 15.328377] [drm:intel_modeset_readout_hw_state] [CONNECTOR:30:HDMI-A-1] hw state readout: disabled [ 15.328383] [drm:intel_modeset_readout_hw_state] [CONNECTOR:35:HDMI-A-2] hw state readout: disabled [ 15.328389] [drm:intel_modeset_readout_hw_state] [CONNECTOR:37:DP-1] hw state readout: disabled [ 15.328396] [drm:intel_modeset_readout_hw_state] [CONNECTOR:39:DP-2] hw state readout: enabled [ 15.328407] [drm:intel_dump_pipe_config] [CRTC:21][setup_hw_state] config ffff880235630400 for pipe A [ 15.328409] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 15.328411] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 15.328415] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 4, gmch_m: 1514609, gmch_n: 8388608, link_m: 126217, link_n: 524288, tu: 64 [ 15.328418] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 3029219, gmch_n: 8388608, link_m: 126217, link_n: 524288, tu: 64 [ 15.328421] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 15.328423] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 15.328425] [drm:intel_dump_pipe_config] requested mode: [ 15.328429] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 64999 1024 1048 1184 1344 768 772 778 806 0x40 0x5 [ 15.328431] [drm:intel_dump_pipe_config] adjusted mode: [ 15.328434] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 64999 1024 1048 1184 1344 768 772 778 806 0x40 0x5 [ 15.328438] [drm:intel_dump_crtc_timings] crtc timings: 64999 1024 1048 1184 1344 768 772 778 806, type: 0x40 flags: 0x5 [ 15.328440] [drm:intel_dump_pipe_config] port clock: 270000 [ 15.328442] [drm:intel_dump_pipe_config] pipe src size: 1024x768 [ 15.328445] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 15.328447] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 15.328450] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x04000300, enabled [ 15.328451] [drm:intel_dump_pipe_config] ips: 0 [ 15.328453] [drm:intel_dump_pipe_config] double wide: 0 [ 15.328456] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xc4010001, dpll_md: 0x0, fp0: 0x20e08, fp1: 0x30d07 [ 15.328458] [drm:intel_dump_pipe_config] planes on this crtc [ 15.328460] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0 [ 15.328463] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 15.328466] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 15.328469] [drm:intel_dump_pipe_config] [CRTC:25][setup_hw_state] config ffff880234cd4000 for pipe B [ 15.328471] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 15.328473] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 15.328476] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 15.328479] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 15.328482] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 15.328484] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 15.328486] [drm:intel_dump_pipe_config] requested mode: [ 15.328489] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 15.328491] [drm:intel_dump_pipe_config] adjusted mode: [ 15.328495] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 15.328498] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 15.328500] [drm:intel_dump_pipe_config] port clock: 0 [ 15.328502] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 15.328504] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 15.328506] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 15.328509] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 15.328511] [drm:intel_dump_pipe_config] ips: 0 [ 15.328512] [drm:intel_dump_pipe_config] double wide: 0 [ 15.328515] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 15.328517] [drm:intel_dump_pipe_config] planes on this crtc [ 15.328519] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 1.0 idx: 3 disabled, scaler_id = 0 [ 15.328522] [drm:intel_dump_pipe_config] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0 [ 15.328525] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0 [ 15.328533] [drm:ironlake_get_initial_plane_config] pipe A with fb: size=1024x768@32, offset=0, pitch 4096, size 0x300000 [ 15.328537] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=300000 [ 15.328541] [drm:i915_pages_create_for_stolen] offset=0x0, size=3145728 [ 15.328547] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff880231934000 [ 15.328957] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 300000 [ 15.328960] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [300000, 7ffff000] [ 15.331456] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0 [ 15.332301] [drm:i915_gem_context_init] HW context support initialized [ 15.332312] [drm:init_status_page] render ring hws offset: 0x7fff2000 [ 15.332371] [drm:intel_init_pipe_control] render ring pipe control offset: 0x00320000 [ 15.332379] [drm:init_status_page] bsd ring hws offset: 0x00321000 [ 15.332427] [drm:init_status_page] blitter ring hws offset: 0x00342000 [ 15.332538] [drm:intel_update_cdclk] Current CD clock rate: 400000 kHz [ 15.332556] [drm:gen6_check_mch_setup] Wrong MCH_SSKPD value: 0x16040307 This can cause underruns. [ 15.332587] [drm:intel_fbdev_init_bios] found possible fb from plane A [ 15.332589] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping [ 15.332591] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb [ 15.332594] [drm:intel_fbdev_init_bios] pipe A area: 1024x768, bpp: 32, size: 3145728 [ 15.332598] [drm:intel_fbdev_init_bios] fb big enough for plane A (3145728 >= 3145728) [ 15.332600] [drm:intel_fbdev_init_bios] pipe B not active, skipping [ 15.332601] [drm:intel_fbdev_init_bios] using BIOS fb for initial console [ 15.332633] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:VGA-1] [ 15.332639] [drm:intel_crt_detect] [CONNECTOR:27:VGA-1] force=1 [ 15.332644] [drm:intel_didl_outputs] No ACPI video bus found [ 15.332648] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000 [ 15.332690] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 15.342316] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 15.342321] [drm:intel_crt_detect] CRT not detected via hotplug [ 15.342613] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 15.342617] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 15.342843] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 15.342848] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 15.342850] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 15.342853] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 15.343283] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 15.343285] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 15.343287] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 15.343290] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:VGA-1] status updated from 3 to 2 [ 15.343296] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:VGA-1] disconnected [ 15.343299] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-1] [ 15.343301] [drm:intel_hdmi_detect] [CONNECTOR:30:HDMI-A-1] [ 15.343468] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 15.343470] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 15.343711] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 15.343723] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 15.343727] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-1] status updated from 3 to 2 [ 15.343732] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-1] disconnected [ 15.343735] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 15.343737] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 15.396978] [drm] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 [ 15.410278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 15.410284] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] status updated from 3 to 2 [ 15.410287] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 15.410290] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-1] [ 15.410293] [drm:intel_dp_detect] [CONNECTOR:37:DP-1] [ 15.410301] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-1] status updated from 3 to 2 [ 15.410304] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-1] disconnected [ 15.410306] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2] [ 15.410309] [drm:intel_dp_detect] [CONNECTOR:39:DP-2] [ 15.410845] [drm:intel_dp_get_dpcd] DPCD: 10 0a 82 40 00 00 01 00 02 00 00 00 10 01 00 [ 15.410850] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source no, sink no [ 15.410853] [drm:intel_dp_print_rates] source rates: 162000, 270000 [ 15.410855] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 15.410858] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 15.412822] [drm:drm_dp_i2c_do_msg] native defer [ 15.414350] [drm:drm_dp_i2c_do_msg] native defer [ 15.415872] [drm:drm_dp_i2c_do_msg] native defer [ 15.417391] [drm:drm_dp_i2c_do_msg] native defer [ 15.418960] [drm:drm_dp_i2c_do_msg] native defer [ 15.420490] [drm:drm_dp_i2c_do_msg] native defer [ 15.422025] [drm:drm_dp_i2c_do_msg] native defer [ 15.423548] [drm:drm_dp_i2c_do_msg] native defer [ 15.424891] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2] status updated from 3 to 1 [ 15.424915] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 15.424921] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2] probed modes : [ 15.424926] [drm:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1344 768 772 778 806 0x48 0xa [ 15.424930] [drm:drm_mode_debug_printmodeline] Modeline 45:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5 [ 15.424934] [drm:drm_mode_debug_printmodeline] Modeline 44:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 15.424967] [drm:drm_setup_crtcs] [ 15.424970] [drm:drm_enable_connectors] connector 27 enabled? no [ 15.424972] [drm:drm_enable_connectors] connector 30 enabled? no [ 15.424974] [drm:drm_enable_connectors] connector 35 enabled? no [ 15.424976] [drm:drm_enable_connectors] connector 37 enabled? no [ 15.424986] [drm:drm_enable_connectors] connector 39 enabled? yes [ 15.424989] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping [ 15.424990] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 15.424992] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 15.424994] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 15.424996] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-2 [ 15.424998] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-2 0 [ 15.425001] [drm:intel_fb_initial_config] connector DP-2 on pipe A [CRTC:21]: 1024x768 [ 15.425004] [drm:drm_setup_crtcs] desired mode 1024x768 set on crtc 21 (0,0) [ 15.425007] [drm:intelfb_create] re-using BIOS fb [ 15.425027] [drm:intelfb_create] allocated 1024x768 fb: 0x00000000, bo ffff880231934000 [ 15.425106] fbcon: inteldrmfb (fb0) is primary device [ 15.425185] [drm:connected_sink_compute_bpp] [CONNECTOR:39:DP-2] checking for sink bpp constrains [ 15.425187] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 15.425189] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 65000KHz [ 15.425194] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 2 clock 162000 bpp 24 [ 15.425195] [drm:intel_dp_compute_config] DP link bw required 156000 available 259200 [ 15.425197] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 15.425198] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 15.425201] [drm:intel_dump_pipe_config] [CRTC:21][modeset] config ffff880234cde000 for pipe A [ 15.425201] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 15.425203] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 15.425205] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 3029219, gmch_n: 4194304, link_m: 126217, link_n: 524288, tu: 64 [ 15.425206] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 2524349, gmch_n: 4194304, link_m: 105181, link_n: 262144, tu: 64 [ 15.425208] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 15.425209] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 15.425210] [drm:intel_dump_pipe_config] requested mode: [ 15.425213] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 772 778 806 0x48 0xa [ 15.425214] [drm:intel_dump_pipe_config] adjusted mode: [ 15.425217] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 772 778 806 0x48 0xa [ 15.425219] [drm:intel_dump_crtc_timings] crtc timings: 65000 1024 1048 1184 1344 768 772 778 806, type: 0x48 flags: 0xa [ 15.425220] [drm:intel_dump_pipe_config] port clock: 162000 [ 15.425221] [drm:intel_dump_pipe_config] pipe src size: 1024x768 [ 15.425222] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 15.425224] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 15.425225] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 15.425226] [drm:intel_dump_pipe_config] ips: 0 [ 15.425227] [drm:intel_dump_pipe_config] double wide: 0 [ 15.425228] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xc4010001, dpll_md: 0x0, fp0: 0x20e08, fp1: 0x30d07 [ 15.425229] [drm:intel_dump_pipe_config] planes on this crtc [ 15.425232] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled [ 15.425234] [drm:intel_dump_pipe_config] FB:41, fb = 1024x768 format = 0x34325258 [ 15.425235] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0 [ 15.425236] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 15.425238] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 15.425258] [drm:intel_get_shared_dpll] CRTC:21 allocated PCH DPLL A [ 15.425259] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A [ 15.425269] [drm:set_no_fbc_reason] Disabling FBC: disabled per chip default [ 15.425277] [drm:intel_disable_pipe] disabling pipe A [ 15.434502] [drm:intel_dp_link_down] [ 15.450651] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 21 [ 15.450659] [drm:intel_disable_shared_dpll] disabling PCH DPLL A [ 15.450872] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A [ 15.451443] [drm:intel_enable_pipe] enabling pipe A [ 15.452263] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x700 [ 15.452267] [drm:gen6_fdi_link_train] FDI train 1 done. [ 15.452927] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x600 [ 15.452931] [drm:gen6_fdi_link_train] FDI train 2 done. [ 15.452931] [drm:gen6_fdi_link_train] FDI train done. [ 15.452936] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 0, on? 0) for crtc 21 [ 15.452938] [drm:intel_enable_shared_dpll] enabling PCH DPLL A [ 15.454730] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 15.454732] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 15.454733] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 15.455468] [drm:intel_dp_set_signal_levels] Using signal levels 02000000 [ 15.455469] [drm:intel_dp_set_signal_levels] Using vswing level 1 [ 15.455470] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 15.456191] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 15.457224] [drm:intel_dp_set_signal_levels] Using signal levels 02400000 [ 15.457225] [drm:intel_dp_set_signal_levels] Using vswing level 1 [ 15.457226] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 15.458246] [drm:intel_dp_set_signal_levels] Using signal levels 02800000 [ 15.458247] [drm:intel_dp_set_signal_levels] Using vswing level 1 [ 15.458248] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 2 [ 15.459269] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 15.476027] [drm:intel_connector_check_state] [CONNECTOR:39:DP-2] [ 15.476035] [drm:check_encoder_state] [ENCODER:28:DAC-28] [ 15.476040] [drm:check_encoder_state] [ENCODER:29:TMDS-29] [ 15.476044] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 15.476048] [drm:check_encoder_state] [ENCODER:36:TMDS-36] [ 15.476053] [drm:check_encoder_state] [ENCODER:38:TMDS-38] [ 15.476055] [drm:check_crtc_state] [CRTC:21] [ 15.476081] [drm:check_shared_dpll_state] PCH DPLL A [ 15.476087] [drm:check_shared_dpll_state] PCH DPLL B [ 15.476098] [drm:drm_fb_helper_hotplug_event] [ 15.476100] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:VGA-1] [ 15.476102] [drm:intel_crt_detect] [CONNECTOR:27:VGA-1] force=1 [ 15.476106] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 15.476107] [drm:intel_crt_detect] CRT not detected via hotplug [ 15.476295] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 15.476296] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 15.476471] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 15.476473] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 15.476474] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 15.476475] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 15.476902] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 15.476903] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 15.476904] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 15.476906] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:VGA-1] disconnected [ 15.476915] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-1] [ 15.476916] [drm:intel_hdmi_detect] [CONNECTOR:30:HDMI-A-1] [ 15.477090] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 15.477091] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 15.477264] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 15.477274] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 15.477276] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-1] disconnected [ 15.477277] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 15.477278] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 15.490266] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 15.490267] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 15.490269] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-1] [ 15.490270] [drm:intel_dp_detect] [CONNECTOR:37:DP-1] [ 15.490275] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-1] disconnected [ 15.490276] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2] [ 15.490277] [drm:intel_dp_detect] [CONNECTOR:39:DP-2] [ 15.490807] [drm:intel_dp_get_dpcd] DPCD: 10 0a 82 40 00 00 01 00 02 00 00 00 10 01 00 [ 15.490809] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source no, sink no [ 15.490811] [drm:intel_dp_print_rates] source rates: 162000, 270000 [ 15.490812] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 15.490814] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 15.492766] [drm:drm_dp_i2c_do_msg] native defer [ 15.494283] [drm:drm_dp_i2c_do_msg] native defer [ 15.495826] [drm:drm_dp_i2c_do_msg] native defer [ 15.497364] [drm:drm_dp_i2c_do_msg] native defer [ 15.498922] [drm:drm_dp_i2c_do_msg] native defer [ 15.500465] [drm:drm_dp_i2c_do_msg] native defer [ 15.501991] [drm:drm_dp_i2c_do_msg] native defer [ 15.503519] [drm:drm_dp_i2c_do_msg] native defer [ 15.504868] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 15.504881] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2] probed modes : [ 15.504886] [drm:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1344 768 772 778 806 0x48 0xa [ 15.504889] [drm:drm_mode_debug_printmodeline] Modeline 45:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5 [ 15.504893] [drm:drm_mode_debug_printmodeline] Modeline 44:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 15.504897] [drm:drm_setup_crtcs] [ 15.504899] [drm:drm_enable_connectors] connector 27 enabled? no [ 15.504900] [drm:drm_enable_connectors] connector 30 enabled? no [ 15.504902] [drm:drm_enable_connectors] connector 35 enabled? no [ 15.504903] [drm:drm_enable_connectors] connector 37 enabled? no [ 15.504904] [drm:drm_enable_connectors] connector 39 enabled? yes [ 15.504906] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping [ 15.504908] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 15.504909] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 15.504910] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 15.504911] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-2 [ 15.504913] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-2 0 [ 15.504915] [drm:intel_fb_initial_config] connector DP-2 on pipe A [CRTC:21]: 1024x768 [ 15.504918] [drm:drm_setup_crtcs] desired mode 1024x768 set on crtc 21 (0,0) [ 15.504970] Console: switching to colour frame buffer device 128x48 [ 15.507870] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 15.609904] Adding 7720664k swap on /dev/sda2. Priority:-1 extents:1 across:7720664k FS [ 16.347319] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on RC6p off RC6pp off [ 16.351340] [drm:gen6_enable_rps] Overclocking supported. Max: 1100MHz, Overclock max: 1100MHz [ 17.978425] ipheth 2-1.4:4.2: Apple iPhone USB Ethernet device attached [ 17.978461] usbcore: registered new interface driver ipheth [ 18.004547] ipheth 2-1.4:4.2 enp0s29u1u4c4i2: renamed from eth0 [ 23.945119] [drm:i915_gem_open] [ 23.945141] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 26.386341] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 26.646851] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 26.652548] IPv6: ADDRCONF(NETDEV_UP): enp0s29u1u4c4i2: link is not ready [ 27.619141] [drm:i915_gem_open] [ 28.661767] [drm:i915_gem_open] [ 28.661789] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 28.661794] [drm:drm_mode_getresources] [CRTC:21] [ 28.661796] [drm:drm_mode_getresources] [CRTC:25] [ 28.661798] [drm:drm_mode_getresources] [ENCODER:28:DAC-28] [ 28.661800] [drm:drm_mode_getresources] [ENCODER:29:TMDS-29] [ 28.661802] [drm:drm_mode_getresources] [ENCODER:34:TMDS-34] [ 28.661804] [drm:drm_mode_getresources] [ENCODER:36:TMDS-36] [ 28.661806] [drm:drm_mode_getresources] [ENCODER:38:TMDS-38] [ 28.661808] [drm:drm_mode_getresources] [CONNECTOR:27:VGA-1] [ 28.661811] [drm:drm_mode_getresources] [CONNECTOR:30:HDMI-A-1] [ 28.661813] [drm:drm_mode_getresources] [CONNECTOR:35:HDMI-A-2] [ 28.661815] [drm:drm_mode_getresources] [CONNECTOR:37:DP-1] [ 28.661817] [drm:drm_mode_getresources] [CONNECTOR:39:DP-2] [ 28.661819] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 28.661994] [drm:i915_gem_open] [ 28.662003] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 28.662007] [drm:drm_mode_getresources] [CRTC:21] [ 28.662009] [drm:drm_mode_getresources] [CRTC:25] [ 28.662011] [drm:drm_mode_getresources] [ENCODER:28:DAC-28] [ 28.662013] [drm:drm_mode_getresources] [ENCODER:29:TMDS-29] [ 28.662015] [drm:drm_mode_getresources] [ENCODER:34:TMDS-34] [ 28.662017] [drm:drm_mode_getresources] [ENCODER:36:TMDS-36] [ 28.662019] [drm:drm_mode_getresources] [ENCODER:38:TMDS-38] [ 28.662021] [drm:drm_mode_getresources] [CONNECTOR:27:VGA-1] [ 28.662023] [drm:drm_mode_getresources] [CONNECTOR:30:HDMI-A-1] [ 28.662025] [drm:drm_mode_getresources] [CONNECTOR:35:HDMI-A-2] [ 28.662027] [drm:drm_mode_getresources] [CONNECTOR:37:DP-1] [ 28.662029] [drm:drm_mode_getresources] [CONNECTOR:39:DP-2] [ 28.662032] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 28.662039] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 28.662042] [drm:drm_mode_getresources] [CRTC:21] [ 28.662044] [drm:drm_mode_getresources] [CRTC:25] [ 28.662046] [drm:drm_mode_getresources] [ENCODER:28:DAC-28] [ 28.662048] [drm:drm_mode_getresources] [ENCODER:29:TMDS-29] [ 28.662050] [drm:drm_mode_getresources] [ENCODER:34:TMDS-34] [ 28.662052] [drm:drm_mode_getresources] [ENCODER:36:TMDS-36] [ 28.662054] [drm:drm_mode_getresources] [ENCODER:38:TMDS-38] [ 28.662056] [drm:drm_mode_getresources] [CONNECTOR:27:VGA-1] [ 28.662058] [drm:drm_mode_getresources] [CONNECTOR:30:HDMI-A-1] [ 28.662060] [drm:drm_mode_getresources] [CONNECTOR:35:HDMI-A-2] [ 28.662062] [drm:drm_mode_getresources] [CONNECTOR:37:DP-1] [ 28.662064] [drm:drm_mode_getresources] [CONNECTOR:39:DP-2] [ 28.662066] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 28.662089] [drm:drm_mode_addfb2] [FB:46] [ 33.170932] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 33.362277] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 33.362284] [drm:drm_mode_getresources] [CRTC:21] [ 33.362286] [drm:drm_mode_getresources] [CRTC:25] [ 33.362288] [drm:drm_mode_getresources] [ENCODER:28:DAC-28] [ 33.362290] [drm:drm_mode_getresources] [ENCODER:29:TMDS-29] [ 33.362292] [drm:drm_mode_getresources] [ENCODER:34:TMDS-34] [ 33.362293] [drm:drm_mode_getresources] [ENCODER:36:TMDS-36] [ 33.362295] [drm:drm_mode_getresources] [ENCODER:38:TMDS-38] [ 33.362297] [drm:drm_mode_getresources] [CONNECTOR:27:VGA-1] [ 33.362299] [drm:drm_mode_getresources] [CONNECTOR:30:HDMI-A-1] [ 33.362301] [drm:drm_mode_getresources] [CONNECTOR:35:HDMI-A-2] [ 33.362302] [drm:drm_mode_getresources] [CONNECTOR:37:DP-1] [ 33.362304] [drm:drm_mode_getresources] [CONNECTOR:39:DP-2] [ 33.362306] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 33.362312] [drm:drm_mode_getconnector] [CONNECTOR:27:?] [ 33.362316] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:VGA-1] [ 33.362318] [drm:intel_crt_detect] [CONNECTOR:27:VGA-1] force=1 [ 33.362328] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 33.362330] [drm:intel_crt_detect] CRT not detected via hotplug [ 33.362506] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 33.362519] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 33.362682] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 33.362687] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 33.362689] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 33.362692] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 33.363100] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 33.363102] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 33.363104] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 33.363107] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:VGA-1] disconnected [ 33.363114] [drm:drm_mode_getconnector] [CONNECTOR:27:?] [ 33.363188] [drm:drm_mode_getconnector] [CONNECTOR:30:?] [ 33.363191] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-1] [ 33.363193] [drm:intel_hdmi_detect] [CONNECTOR:30:HDMI-A-1] [ 33.363362] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 33.363363] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 33.363519] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 33.363522] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 33.363524] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-1] disconnected [ 33.363528] [drm:drm_mode_getconnector] [CONNECTOR:30:?] [ 33.363577] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 33.363579] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 33.363581] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 33.376249] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 33.376252] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 33.376257] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 33.376308] [drm:drm_mode_getconnector] [CONNECTOR:37:?] [ 33.376310] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-1] [ 33.376312] [drm:intel_dp_detect] [CONNECTOR:37:DP-1] [ 33.376317] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-1] disconnected [ 33.376320] [drm:drm_mode_getconnector] [CONNECTOR:37:?] [ 33.376358] [drm:drm_mode_getconnector] [CONNECTOR:39:?] [ 33.376360] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2] [ 33.376362] [drm:intel_dp_detect] [CONNECTOR:39:DP-2] [ 33.376882] [drm:intel_dp_get_dpcd] DPCD: 10 0a 82 40 00 00 01 00 02 00 00 00 10 01 00 [ 33.376885] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source no, sink no [ 33.376887] [drm:intel_dp_print_rates] source rates: 162000, 270000 [ 33.376890] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 33.376892] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 33.378856] [drm:drm_dp_i2c_do_msg] native defer [ 33.380554] [drm:drm_dp_i2c_do_msg] native defer [ 33.382084] [drm:drm_dp_i2c_do_msg] native defer [ 33.383602] [drm:drm_dp_i2c_do_msg] native defer [ 33.385136] [drm:drm_dp_i2c_do_msg] native defer [ 33.386648] [drm:drm_dp_i2c_do_msg] native defer [ 33.388167] [drm:drm_dp_i2c_do_msg] native defer [ 33.389678] [drm:drm_dp_i2c_do_msg] native defer [ 33.391011] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 33.391018] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2] probed modes : [ 33.391022] [drm:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1344 768 772 778 806 0x48 0xa [ 33.391025] [drm:drm_mode_debug_printmodeline] Modeline 45:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5 [ 33.391028] [drm:drm_mode_debug_printmodeline] Modeline 44:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 33.391039] [drm:drm_mode_getconnector] [CONNECTOR:39:?] [ 33.391147] [drm:drm_mode_getconnector] [CONNECTOR:27:?] [ 33.391149] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:VGA-1] [ 33.391151] [drm:intel_crt_detect] [CONNECTOR:27:VGA-1] force=1 [ 33.391156] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 33.391158] [drm:intel_crt_detect] CRT not detected via hotplug [ 33.391352] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 33.391357] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 33.391554] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 33.391560] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 33.391563] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 33.391566] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 33.391951] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 33.391953] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 33.391954] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 33.391956] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:VGA-1] disconnected [ 33.391962] [drm:drm_mode_getconnector] [CONNECTOR:27:?] [ 33.391999] [drm:drm_mode_getconnector] [CONNECTOR:30:?] [ 33.392001] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-1] [ 33.392003] [drm:intel_hdmi_detect] [CONNECTOR:30:HDMI-A-1] [ 33.392198] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 33.392203] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 33.392392] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 33.392398] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 33.392402] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-1] disconnected [ 33.392411] [drm:drm_mode_getconnector] [CONNECTOR:30:?] [ 33.392453] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 33.392455] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 33.392457] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 33.402909] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 33.402911] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 33.402916] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 33.402935] [drm:drm_mode_getconnector] [CONNECTOR:37:?] [ 33.402937] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-1] [ 33.402939] [drm:intel_dp_detect] [CONNECTOR:37:DP-1] [ 33.402945] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-1] disconnected [ 33.402947] [drm:drm_mode_getconnector] [CONNECTOR:37:?] [ 33.402958] [drm:drm_mode_getconnector] [CONNECTOR:39:?] [ 33.402960] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2] [ 33.402962] [drm:intel_dp_detect] [CONNECTOR:39:DP-2] [ 33.403469] [drm:intel_dp_get_dpcd] DPCD: 10 0a 82 40 00 00 01 00 02 00 00 00 10 01 00 [ 33.403472] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source no, sink no [ 33.403475] [drm:intel_dp_print_rates] source rates: 162000, 270000 [ 33.403477] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 33.403479] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 33.405384] [drm:drm_dp_i2c_do_msg] native defer [ 33.406885] [drm:drm_dp_i2c_do_msg] native defer [ 33.408385] [drm:drm_dp_i2c_do_msg] native defer [ 33.409893] [drm:drm_dp_i2c_do_msg] native defer [ 33.411403] [drm:drm_dp_i2c_do_msg] native defer [ 33.412919] [drm:drm_dp_i2c_do_msg] native defer [ 33.414432] [drm:drm_dp_i2c_do_msg] native defer [ 33.415947] [drm:drm_dp_i2c_do_msg] native defer [ 33.417266] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 33.417271] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2] probed modes : [ 33.417274] [drm:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1344 768 772 778 806 0x48 0xa [ 33.417277] [drm:drm_mode_debug_printmodeline] Modeline 45:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5 [ 33.417280] [drm:drm_mode_debug_printmodeline] Modeline 44:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 33.417285] [drm:drm_mode_getconnector] [CONNECTOR:39:?] [ 37.042242] [drm:drm_mode_addfb2] [FB:46] [ 37.042249] [drm:drm_mode_setcrtc] [CRTC:21] [ 37.042254] [drm:drm_mode_setcrtc] [CONNECTOR:39:DP-2] [ 37.057286] [drm:drm_mode_setcrtc] [CRTC:25] [ 42.447981] [drm:i915_gem_open] [ 46.607919] fuse init (API version 7.23) [ 67.812905] [drm:drm_mode_getconnector] [CONNECTOR:27:?] [ 67.812910] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:VGA-1] [ 67.812913] [drm:intel_crt_detect] [CONNECTOR:27:VGA-1] force=1 [ 67.812919] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 67.812920] [drm:intel_crt_detect] CRT not detected via hotplug [ 67.813086] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 67.813089] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 67.813253] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 67.813256] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 67.813258] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 67.813260] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 67.813648] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 67.813652] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 67.813654] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 67.813659] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:VGA-1] disconnected [ 67.813667] [drm:drm_mode_getconnector] [CONNECTOR:27:?] [ 67.813681] [drm:drm_mode_getconnector] [CONNECTOR:30:?] [ 67.813685] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-1] [ 67.813687] [drm:intel_hdmi_detect] [CONNECTOR:30:HDMI-A-1] [ 67.813847] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 67.813849] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 67.814004] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 67.814007] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 67.814009] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-1] disconnected [ 67.814014] [drm:drm_mode_getconnector] [CONNECTOR:30:?] [ 67.814022] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 67.814024] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 67.814026] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 67.826329] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 67.826334] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 67.826345] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 67.826351] [drm:drm_mode_getconnector] [CONNECTOR:37:?] [ 67.826354] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-1] [ 67.826356] [drm:intel_dp_detect] [CONNECTOR:37:DP-1] [ 67.826360] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-1] disconnected [ 67.826362] [drm:drm_mode_getconnector] [CONNECTOR:37:?] [ 67.826367] [drm:drm_mode_getconnector] [CONNECTOR:39:?] [ 67.826369] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2] [ 67.826371] [drm:intel_dp_detect] [CONNECTOR:39:DP-2] [ 67.826875] [drm:intel_dp_get_dpcd] DPCD: 10 0a 82 40 00 00 01 00 02 00 00 00 10 01 00 [ 67.826878] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source no, sink no [ 67.826880] [drm:intel_dp_print_rates] source rates: 162000, 270000 [ 67.826882] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 67.826884] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 67.828789] [drm:drm_dp_i2c_do_msg] native defer [ 67.830299] [drm:drm_dp_i2c_do_msg] native defer [ 67.831799] [drm:drm_dp_i2c_do_msg] native defer [ 67.833325] [drm:drm_dp_i2c_do_msg] native defer [ 67.834853] [drm:drm_dp_i2c_do_msg] native defer [ 67.836379] [drm:drm_dp_i2c_do_msg] native defer [ 67.837895] [drm:drm_dp_i2c_do_msg] native defer [ 67.839419] [drm:drm_dp_i2c_do_msg] native defer [ 67.840746] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 67.840755] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2] probed modes : [ 67.840761] [drm:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1344 768 772 778 806 0x48 0xa [ 67.840766] [drm:drm_mode_debug_printmodeline] Modeline 45:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5 [ 67.840771] [drm:drm_mode_debug_printmodeline] Modeline 44:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 67.840787] [drm:drm_mode_getconnector] [CONNECTOR:39:?] [ 75.737144] [drm:drm_mode_getconnector] [CONNECTOR:27:?] [ 75.737150] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:VGA-1] [ 75.737153] [drm:intel_crt_detect] [CONNECTOR:27:VGA-1] force=1 [ 75.737157] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 75.737159] [drm:intel_crt_detect] CRT not detected via hotplug [ 75.737342] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 75.737353] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 75.737512] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 75.737515] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 75.737518] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 75.737521] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 75.737918] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 75.737920] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 75.737922] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 75.737924] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:VGA-1] disconnected [ 75.737930] [drm:drm_mode_getconnector] [CONNECTOR:27:?] [ 75.737938] [drm:drm_mode_getconnector] [CONNECTOR:30:?] [ 75.737940] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-1] [ 75.737942] [drm:intel_hdmi_detect] [CONNECTOR:30:HDMI-A-1] [ 75.738105] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 75.738108] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 75.738267] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 75.738269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 75.738271] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-1] disconnected [ 75.738275] [drm:drm_mode_getconnector] [CONNECTOR:30:?] [ 75.738280] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 75.738282] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 75.738284] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 75.748917] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 75.748919] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 75.748930] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 75.748935] [drm:drm_mode_getconnector] [CONNECTOR:37:?] [ 75.748937] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-1] [ 75.748939] [drm:intel_dp_detect] [CONNECTOR:37:DP-1] [ 75.748943] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-1] disconnected [ 75.748946] [drm:drm_mode_getconnector] [CONNECTOR:37:?] [ 75.748950] [drm:drm_mode_getconnector] [CONNECTOR:39:?] [ 75.748952] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2] [ 75.748954] [drm:intel_dp_detect] [CONNECTOR:39:DP-2] [ 75.749467] [drm:intel_dp_get_dpcd] DPCD: 10 0a 82 40 00 00 01 00 02 00 00 00 10 01 00 [ 75.749470] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source no, sink no [ 75.749473] [drm:intel_dp_print_rates] source rates: 162000, 270000 [ 75.749475] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 75.749477] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 75.751428] [drm:drm_dp_i2c_do_msg] native defer [ 75.752938] [drm:drm_dp_i2c_do_msg] native defer [ 75.754447] [drm:drm_dp_i2c_do_msg] native defer [ 75.755968] [drm:drm_dp_i2c_do_msg] native defer [ 75.757482] [drm:drm_dp_i2c_do_msg] native defer [ 75.758999] [drm:drm_dp_i2c_do_msg] native defer [ 75.760510] [drm:drm_dp_i2c_do_msg] native defer [ 75.762027] [drm:drm_dp_i2c_do_msg] native defer [ 75.763359] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 75.763366] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2] probed modes : [ 75.763370] [drm:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1344 768 772 778 806 0x48 0xa [ 75.763373] [drm:drm_mode_debug_printmodeline] Modeline 45:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5 [ 75.763376] [drm:drm_mode_debug_printmodeline] Modeline 44:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 75.763394] [drm:drm_mode_getconnector] [CONNECTOR:39:?]