[ 0.000000] microcode: microcode updated early to revision 0x2d, date = 2018-02-07 [ 0.000000] Linux version 4.16.3-1-ARCH (builduser@heftig-2067) (gcc version 7.3.1 20180406 (GCC)) #1 SMP PREEMPT Thu Apr 19 09:17:56 UTC 2018 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d7b2be9f-7dd7-4cd0-95b8-5208af2d3441 rw quiet elevator=noop drm.debug=14 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Disabled fast string operations [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000da99efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da99f000-0x00000000dae9efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd20000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e5fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000041e600000-0x000000041effffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: LENOVO 4177X07/4177X07, BIOS 83ET75WW (1.45 ) 05/10/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x41e600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FE0000000 write-back [ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 6 base 100000000 mask F00000000 write-back [ 0.000000] 7 base 200000000 mask E00000000 write-back [ 0.000000] 8 base 400000000 mask FE0000000 write-back [ 0.000000] 9 base 41F000000 mask FFF000000 uncachable [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] BRK [0x26764a000, 0x26764afff] PGTABLE [ 0.000000] BRK [0x26764b000, 0x26764bfff] PGTABLE [ 0.000000] BRK [0x26764c000, 0x26764cfff] PGTABLE [ 0.000000] BRK [0x26764d000, 0x26764dfff] PGTABLE [ 0.000000] BRK [0x26764e000, 0x26764efff] PGTABLE [ 0.000000] BRK [0x26764f000, 0x26764ffff] PGTABLE [ 0.000000] BRK [0x267650000, 0x267650fff] PGTABLE [ 0.000000] BRK [0x267651000, 0x267651fff] PGTABLE [ 0.000000] BRK [0x267652000, 0x267652fff] PGTABLE [ 0.000000] BRK [0x267653000, 0x267653fff] PGTABLE [ 0.000000] BRK [0x267654000, 0x267654fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x36ad6000-0x37562fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F00E0 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x00000000DAFFE120 0000AC (v01 LENOVO TP-83 00001450 PTEC 00000002) [ 0.000000] ACPI: FACP 0x00000000DAFE8000 0000F4 (v04 LENOVO TP-83 00001450 PTL 00000002) [ 0.000000] ACPI: DSDT 0x00000000DAFEB000 00E7BC (v01 LENOVO TP-83 00001450 INTL 20061109) [ 0.000000] ACPI: FACS 0x00000000DAF2D000 000040 [ 0.000000] ACPI: FACS 0x00000000DAF2D000 000040 [ 0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LENOVO TP-83 00001450 PTEC 00000001) [ 0.000000] ACPI: SSDT 0x00000000DAFFC000 000249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000DAFFB000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000DAFFA000 000797 (v01 LENOVO SataAhci 00001000 INTL 20061109) [ 0.000000] ACPI: HPET 0x00000000DAFE7000 000038 (v01 LENOVO TP-83 00001450 PTL 00000002) [ 0.000000] ACPI: APIC 0x00000000DAFE6000 000098 (v01 LENOVO TP-83 00001450 PTL 00000002) [ 0.000000] ACPI: MCFG 0x00000000DAFE5000 00003C (v01 LENOVO TP-83 00001450 PTL 00000002) [ 0.000000] ACPI: ECDT 0x00000000DAFE4000 000052 (v01 LENOVO TP-83 00001450 PTL 00000002) [ 0.000000] ACPI: ASF! 0x00000000DAFEA000 0000A5 (v32 LENOVO TP-83 00001450 PTL 00000002) [ 0.000000] ACPI: TCPA 0x00000000DAFE3000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.000000] ACPI: SSDT 0x00000000DAFE2000 000A69 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000DAFE1000 000996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: DMAR 0x00000000DAFE0000 0000E8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: UEFI 0x00000000DAFDF000 00003E (v01 LENOVO TP-83 00001450 PTL 00000002) [ 0.000000] ACPI: UEFI 0x00000000DAFDE000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 0x00000000DAFDD000 000292 (v01 LENOVO TP-83 00001450 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041e5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x41e5f2000-0x41e5f4fff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000041e5fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff] [ 0.000000] node 0: [mem 0x0000000040200000-0x00000000da99efff] [ 0.000000] node 0: [mem 0x00000000dafff000-0x00000000daffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000041e5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041e5fffff] [ 0.000000] On node 0 totalpages: 4164412 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13911 pages used for memmap [ 0.000000] DMA32 zone: 890272 pages, LIFO batch:31 [ 0.000000] Normal zone: 51096 pages used for memmap [ 0.000000] Normal zone: 3270144 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 105 pages [ 0.000000] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xda99f000-0xdae9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd20000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4099185 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d7b2be9f-7dd7-4cd0-95b8-5208af2d3441 rw quiet elevator=noop drm.debug=14 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16293668K/16657648K available (10252K kernel code, 1263K rwdata, 3372K rodata, 1452K init, 632K bss, 363980K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 31747 entries in 125 pages [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8. [ 0.000000] RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] Offload RCU callbacks from CPUs: . [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180105 [ 0.000000] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] DMAR: Host address width 36 [ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.000000] DMAR: RMRR base: 0x000000dacd5000 end: 0x000000dacebfff [ 0.000000] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff [ 0.000000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.000000] x2apic enabled [ 0.000000] Switched APIC routing to cluster x2apic. [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.016666] tsc: Fast TSC calibration using PIT [ 0.019999] tsc: Detected 2591.832 MHz processor [ 0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x255c17fe80d, max_idle_ns: 440795231077 ns [ 0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5185.65 BogoMIPS (lpj=8639440) [ 0.019999] pid_max: default: 32768 minimum: 301 [ 0.019999] Security Framework initialized [ 0.019999] Yama: becoming mindful. [ 0.026390] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.029361] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.029495] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.029586] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.030178] Disabled fast string operations [ 0.030187] CPU: Physical Processor ID: 0 [ 0.030189] CPU: Processor Core ID: 0 [ 0.030203] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.030204] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.030214] mce: CPU supports 7 MCE banks [ 0.030239] CPU0: Thermal monitoring enabled (TM1) [ 0.030261] process: using mwait in idle threads [ 0.030268] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.030271] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.030275] Spectre V2 : Mitigation: Full generic retpoline [ 0.030277] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.030278] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.030549] Freeing SMP alternatives memory: 24K [ 0.033112] TSC deadline timer enabled [ 0.033120] smpboot: CPU0: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.043355] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.043420] ... version: 3 [ 0.043422] ... bit width: 48 [ 0.043423] ... generic registers: 4 [ 0.043426] ... value mask: 0000ffffffffffff [ 0.043428] ... max period: 00007fffffffffff [ 0.043429] ... fixed-purpose events: 3 [ 0.043431] ... event mask: 000000070000000f [ 0.050011] Hierarchical SRCU implementation. [ 0.070680] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.076676] smp: Bringing up secondary CPUs ... [ 0.106708] x86: Booting SMP configuration: [ 0.106712] .... node #0, CPUs: #1 [ 0.003333] Disabled fast string operations [ 0.140038] #2 [ 0.003333] Disabled fast string operations [ 0.173377] #3 [ 0.003333] Disabled fast string operations [ 0.176225] smp: Brought up 1 node, 4 CPUs [ 0.176225] smpboot: Max logical packages: 2 [ 0.176225] smpboot: Total of 4 processors activated (20742.60 BogoMIPS) [ 0.177815] devtmpfs: initialized [ 0.177815] x86/mm: Memory block size: 128MB [ 0.182046] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes) [ 0.182046] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.182046] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.182046] pinctrl core: initialized pinctrl subsystem [ 0.182046] RTC time: 16:53:03, date: 04/26/18 [ 0.182046] NET: Registered protocol family 16 [ 0.183388] cpuidle: using governor ladder [ 0.183402] cpuidle: using governor menu [ 0.183458] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.183461] ACPI: bus type PCI registered [ 0.183465] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.184054] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.184083] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.184083] PCI: Using configuration type 1 for base access [ 0.184083] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.186778] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.186974] ACPI: Added _OSI(Module Device) [ 0.186977] ACPI: Added _OSI(Processor Device) [ 0.186980] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.186982] ACPI: Added _OSI(Processor Aggregator Device) [ 0.186990] ACPI: EC: EC started [ 0.186992] ACPI: EC: interrupt blocked [ 0.189055] ACPI: \: Used as first EC [ 0.189061] ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.189065] ACPI: \: Used as boot ECDT EC to handle transactions [ 0.208331] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.224409] ACPI: Dynamic OEM Table Load: [ 0.224436] ACPI: SSDT 0xFFFF94468B5F7000 0008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.226069] ACPI: Dynamic OEM Table Load: [ 0.226087] ACPI: SSDT 0xFFFF94468B5E1C00 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.227260] ACPI: Dynamic OEM Table Load: [ 0.227276] ACPI: SSDT 0xFFFF94468B5E8200 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.230428] ACPI: Interpreter enabled [ 0.230487] ACPI: (supports S0 S3 S4 S5) [ 0.230491] ACPI: Using IOAPIC for interrupt routing [ 0.230569] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.231421] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.244848] ACPI: Power Resource [PUBS] (on) [ 0.245860] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) [ 0.249535] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2) [ 0.256485] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.256907] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11) [ 0.257303] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.257697] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.258090] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11) [ 0.258390] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.258786] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11) [ 0.259179] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11) [ 0.259516] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.259530] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.260442] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability] [ 0.260867] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.260874] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] [ 0.260879] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.260884] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.260928] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.261508] PCI host bridge to bus 0000:00 [ 0.261515] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.261520] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.261525] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.261529] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window] [ 0.261533] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] [ 0.261538] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.261561] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.261814] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 [ 0.261845] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.261861] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.261873] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 0.262167] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.262222] pci 0000:00:16.0: reg 0x10: [mem 0xf2525000-0xf252500f 64bit] [ 0.262386] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.262600] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.262648] pci 0000:00:19.0: reg 0x10: [mem 0xf2500000-0xf251ffff] [ 0.262668] pci 0000:00:19.0: reg 0x14: [mem 0xf252b000-0xf252bfff] [ 0.262689] pci 0000:00:19.0: reg 0x18: [io 0x5080-0x509f] [ 0.262841] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.263044] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.263092] pci 0000:00:1a.0: reg 0x10: [mem 0xf252a000-0xf252a3ff] [ 0.263276] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.263499] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.263553] pci 0000:00:1b.0: reg 0x10: [mem 0xf2520000-0xf2523fff 64bit] [ 0.263739] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.263963] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.264154] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.264374] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.264578] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.264799] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.265005] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.265222] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.265426] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.265651] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.265699] pci 0000:00:1d.0: reg 0x10: [mem 0xf2529000-0xf25293ff] [ 0.265883] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.266087] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100 [ 0.266477] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.266527] pci 0000:00:1f.2: reg 0x10: [io 0x50a8-0x50af] [ 0.266547] pci 0000:00:1f.2: reg 0x14: [io 0x50bc-0x50bf] [ 0.266567] pci 0000:00:1f.2: reg 0x18: [io 0x50a0-0x50a7] [ 0.266588] pci 0000:00:1f.2: reg 0x1c: [io 0x50b8-0x50bb] [ 0.266608] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f] [ 0.266628] pci 0000:00:1f.2: reg 0x24: [mem 0xf2528000-0xf25287ff] [ 0.266747] pci 0000:00:1f.2: PME# supported from D3hot [ 0.266947] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.266995] pci 0000:00:1f.3: reg 0x10: [mem 0xf2524000-0xf25240ff 64bit] [ 0.267048] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.267387] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.267769] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000 [ 0.268302] pci 0000:03:00.0: reg 0x10: [mem 0xf2400000-0xf2401fff 64bit] [ 0.270192] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.280182] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.280197] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff] [ 0.280419] acpiphp: Slot [1] registered [ 0.280433] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.280443] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.280451] pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf23fffff] [ 0.280465] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.280691] pci 0000:0d:00.0: [1180:e822] type 00 class 0x088001 [ 0.280760] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [ 0.280809] pci 0000:0d:00.0: reg 0x10: [mem 0xf1401000-0xf14010ff] [ 0.281140] pci 0000:0d:00.0: supports D1 D2 [ 0.281144] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.281416] pci 0000:0d:00.3: [1180:e832] type 00 class 0x0c0010 [ 0.281472] pci 0000:0d:00.3: reg 0x10: [mem 0xf1400000-0xf14007ff] [ 0.281645] pci 0000:0d:00.3: Enabling fixed DMA alias to 00.0 [ 0.281792] pci 0000:0d:00.3: supports D1 D2 [ 0.281796] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.290098] pci 0000:00:1c.4: PCI bridge to [bus 0d] [ 0.290108] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.290117] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1bfffff] [ 0.290131] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref] [ 0.293167] ACPI: EC: interrupt unblocked [ 0.293183] ACPI: EC: event unblocked [ 0.293198] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.293203] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events [ 0.293420] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.293420] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.293420] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.293420] vgaarb: loaded [ 0.293827] EDAC MC: Ver: 3.0.0 [ 0.294097] PCI: Using ACPI for IRQ routing [ 0.298832] PCI: pci_cache_line_size set to 64 bytes [ 0.299071] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.299076] e820: reserve RAM buffer [mem 0xda99f000-0xdbffffff] [ 0.299080] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.299083] e820: reserve RAM buffer [mem 0x41e600000-0x41fffffff] [ 0.299353] NetLabel: Initializing [ 0.299356] NetLabel: domain hash size = 128 [ 0.299358] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.299394] NetLabel: unlabeled traffic allowed by default [ 0.300536] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.300555] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.302615] clocksource: Switched to clocksource tsc-early [ 0.329739] VFS: Disk quotas dquot_6.6.0 [ 0.329788] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.329962] pnp: PnP ACPI init [ 0.331939] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.331946] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.331951] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.331956] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.331961] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 0.331965] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.331970] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved [ 0.331975] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved [ 0.331979] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved [ 0.331984] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.331989] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.331994] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.331998] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.332003] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.332008] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved [ 0.332014] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.332030] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.332563] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.332569] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.332574] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.332579] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.332584] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.332591] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.332596] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved [ 0.332601] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.332610] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.332616] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.332620] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.332625] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.332630] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.332644] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.332826] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.332891] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.332954] pnp 00:04: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active) [ 0.334001] pnp: PnP ACPI: found 5 devices [ 0.342307] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.342344] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.342352] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.342358] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.342430] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdfa00000-0xdfbfffff] [ 0.342442] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdfc00000-0xdfdfffff 64bit pref] [ 0.342450] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.342459] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.342466] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.342478] pci 0000:00:1c.0: bridge window [mem 0xdfa00000-0xdfbfffff] [ 0.342488] pci 0000:00:1c.0: bridge window [mem 0xdfc00000-0xdfdfffff 64bit pref] [ 0.342503] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.342514] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff] [ 0.342532] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.342539] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.342550] pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf23fffff] [ 0.342559] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.342573] pci 0000:00:1c.4: PCI bridge to [bus 0d] [ 0.342579] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.342591] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1bfffff] [ 0.342599] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref] [ 0.342617] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.342621] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.342626] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.342630] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff window] [ 0.342634] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window] [ 0.342639] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.342643] pci_bus 0000:02: resource 1 [mem 0xdfa00000-0xdfbfffff] [ 0.342647] pci_bus 0000:02: resource 2 [mem 0xdfc00000-0xdfdfffff 64bit pref] [ 0.342652] pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff] [ 0.342656] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] [ 0.342660] pci_bus 0000:05: resource 1 [mem 0xf1c00000-0xf23fffff] [ 0.342664] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.342669] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff] [ 0.342673] pci_bus 0000:0d: resource 1 [mem 0xf1400000-0xf1bfffff] [ 0.342677] pci_bus 0000:0d: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref] [ 0.343007] NET: Registered protocol family 2 [ 0.343444] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) [ 0.343629] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.344303] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.344655] TCP: Hash tables configured (established 131072 bind 65536) [ 0.344784] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.344935] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.345176] NET: Registered protocol family 1 [ 0.345215] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.346235] PCI: CLS 64 bytes, default 64 [ 0.346341] Unpacking initramfs... [ 0.822777] Freeing initrd memory: 10804K [ 0.825347] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.825356] software IO TLB [mem 0xd699f000-0xda99f000] (64MB) mapped at [000000008265cb86-00000000c2c1824d] [ 0.825657] Scanning for low memory corruption every 60 seconds [ 0.827162] Initialise system trusted keyrings [ 0.827184] Key type blacklist registered [ 0.827272] workingset: timestamp_bits=44 max_order=22 bucket_order=0 [ 0.830739] zbud: loaded [ 0.834523] Key type asymmetric registered [ 0.834526] Asymmetric key parser 'x509' registered [ 0.834607] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.834697] io scheduler noop registered (default) [ 0.834700] io scheduler deadline registered [ 0.834817] io scheduler cfq registered [ 0.834820] io scheduler mq-deadline registered [ 0.834822] io scheduler kyber registered [ 0.834837] io scheduler bfq registered [ 0.835264] pcieport 0000:00:1c.0: enabling device (0000 -> 0003) [ 0.836690] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 0.836693] vesafb: scrolling: redraw [ 0.836701] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.836751] vesafb: framebuffer at 0xe0000000, mapped to 0x000000002e59a5b9, using 3072k, total 3072k [ 0.987330] Console: switching to colour frame buffer device 128x48 [ 1.137676] fb0: VESA VGA frame buffer device [ 1.137731] intel_idle: MWAIT substates: 0x21120 [ 1.137734] intel_idle: v0.4.1 model 0x2A [ 1.138135] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.138262] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.138317] ACPI: Lid Switch [LID] [ 1.138419] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.138463] ACPI: Sleep Button [SLPB] [ 1.138588] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.138634] ACPI: Power Button [PWRF] [ 1.141648] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.141652] ACPI: Thermal Zone [THM0] (39 C) [ 1.142083] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.145701] intel_pstate: Intel P-state driver initializing [ 1.146272] ledtrig-cpu: registered to indicate activity on CPUs [ 1.146971] NET: Registered protocol family 10 [ 1.157411] Segment Routing with IPv6 [ 1.157455] NET: Registered protocol family 17 [ 1.158091] RAS: Correctable Errors collector initialized. [ 1.158179] microcode: sig=0x206a7, pf=0x10, revision=0x2d [ 1.158540] microcode: Microcode Update Driver: v2.2. [ 1.158568] sched_clock: Marking stable (1158524596, 0)->(1153427165, 5097431) [ 1.158994] registered taskstats version 1 [ 1.159000] Loading compiled-in X.509 certificates [ 1.159014] zswap: loaded using pool lzo/zbud [ 1.161477] Key type big_key registered [ 1.161788] Magic number: 14:976:894 [ 1.161842] hctosys: unable to open rtc device (rtc0) [ 1.166390] Freeing unused kernel memory: 1452K [ 1.166394] Write protecting the kernel read-only data: 16384k [ 1.168044] Freeing unused kernel memory: 2016K [ 1.171053] Freeing unused kernel memory: 724K [ 1.235982] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.239094] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.240466] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.240809] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 1.245744] ACPI: bus type USB registered [ 1.245767] usbcore: registered new interface driver usbfs [ 1.245778] usbcore: registered new interface driver hub [ 1.245980] usbcore: registered new device driver usb [ 1.247314] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.249507] ehci-pci: EHCI PCI platform driver [ 1.249513] sdhci: Secure Digital Host Controller Interface driver [ 1.249514] sdhci: Copyright(c) Pierre Ossman [ 1.249588] SCSI subsystem initialized [ 1.249675] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.249683] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.249700] ehci-pci 0000:00:1a.0: debug port 2 [ 1.250957] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 8) [ 1.251202] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes [ 1.251368] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA [ 1.253604] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.253611] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf252a000 [ 1.255045] libata version 3.00 loaded. [ 1.266705] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.266761] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.266763] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.266765] usb usb1: Product: EHCI Host Controller [ 1.266767] usb usb1: Manufacturer: Linux 4.16.3-1-ARCH ehci_hcd [ 1.266768] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.266924] hub 1-0:1.0: USB hub found [ 1.266931] hub 1-0:1.0: 3 ports detected [ 1.267266] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.267273] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.267288] ehci-pci 0000:00:1d.0: debug port 2 [ 1.271183] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.271204] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2529000 [ 1.273129] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.283369] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.283506] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.283508] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.283509] usb usb2: Product: EHCI Host Controller [ 1.283511] usb usb2: Manufacturer: Linux 4.16.3-1-ARCH ehci_hcd [ 1.283512] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.283657] hub 2-0:1.0: USB hub found [ 1.283664] hub 2-0:1.0: 3 ports detected [ 1.283834] ahci 0000:00:1f.2: version 3.0 [ 1.284050] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.294212] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode [ 1.294218] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 1.320077] firewire_ohci 0000:0d:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11 [ 1.335444] scsi host0: ahci [ 1.335962] scsi host1: ahci [ 1.336598] scsi host2: ahci [ 1.337067] scsi host3: ahci [ 1.337399] scsi host4: ahci [ 1.337676] scsi host5: ahci [ 1.337822] ata1: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528100 irq 26 [ 1.337827] ata2: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528180 irq 26 [ 1.337831] ata3: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528200 irq 26 [ 1.337835] ata4: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528280 irq 26 [ 1.337839] ata5: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528300 irq 26 [ 1.337841] ata6: DUMMY [ 1.596798] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.616770] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.651299] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.664462] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.664472] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.664478] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.676216] ata1.00: ATA-8: SSD2SC240G3LC726B104-370I, 524ABBF0, max UDMA/133 [ 1.676225] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.684438] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.684448] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.684455] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.696168] ata1.00: configured for UDMA/133 [ 1.698540] scsi 0:0:0:0: Direct-Access ATA SSD2SC240G3LC726 BBF0 PQ: 0 ANSI: 5 [ 1.744379] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.744388] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.745091] hub 1-1:1.0: USB hub found [ 1.745347] hub 1-1:1.0: 6 ports detected [ 1.763797] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.763805] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.764325] hub 2-1:1.0: USB hub found [ 1.764497] hub 2-1:1.0: 8 ports detected [ 1.836787] tsc: Refined TSC clocksource calibration: 2591.586 MHz [ 1.836819] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255b2ff5835, max_idle_ns: 440795305512 ns [ 1.836878] clocksource: Switched to clocksource tsc [ 1.837242] firewire_core 0000:0d:00.3: created device fw0: GUID 0021cc20060dd54c, S400 [ 2.013781] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.043464] usb 2-1.5: new full-speed USB device number 3 using ehci-pci [ 2.139012] ata2.00: ACPI cmd e3/00:10:00:00:00:a0 (IDLE) succeeded [ 2.139331] ata2.00: ACPI cmd e3/00:03:00:00:00:a0 (IDLE) succeeded [ 2.139341] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2.141034] ata2.00: ATAPI: HL-DT-STDVDRAM GT33N, LT22, max UDMA/66 [ 2.144594] ata2.00: ACPI cmd e3/00:10:00:00:00:a0 (IDLE) succeeded [ 2.144903] ata2.00: ACPI cmd e3/00:03:00:00:00:a0 (IDLE) succeeded [ 2.144915] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2.146483] ata2.00: configured for UDMA/66 [ 2.146893] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=1003 [ 2.146899] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.146904] usb 2-1.5: Product: Integrated Smart Card Reader [ 2.146908] usb 2-1.5: Manufacturer: Lenovo [ 2.158901] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT33N LT22 PQ: 0 ANSI: 5 [ 2.511485] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.512721] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2.512731] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.512738] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2.513122] ata3.00: supports DRM functions and may not be fully accessible [ 2.514701] ata3.00: ATA-10: Crucial_CT250MX200SSD3, MU02, max UDMA/133 [ 2.514709] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.520257] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2.520267] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.520273] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2.520650] ata3.00: supports DRM functions and may not be fully accessible [ 2.526475] ata3.00: configured for UDMA/133 [ 2.537315] scsi 2:0:0:0: Direct-Access ATA Crucial_CT250MX2 MU02 PQ: 0 ANSI: 5 [ 2.851486] ata4: SATA link down (SStatus 0 SControl 300) [ 3.164824] ata5: SATA link down (SStatus 0 SControl 300) [ 3.177122] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 3.177141] sd 0:0:0:0: [sda] Write Protect is off [ 3.177143] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.177192] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.177196] ata3.00: Enabling discard_zeroes_data [ 3.177277] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 3.177279] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 3.177307] sd 2:0:0:0: [sdb] Write Protect is off [ 3.177309] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.177332] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.177455] ata3.00: Enabling discard_zeroes_data [ 3.179784] sdb: sdb1 sdb2 [ 3.179924] ata3.00: Enabling discard_zeroes_data [ 3.180316] sd 2:0:0:0: [sdb] supports TCG Opal [ 3.180318] sd 2:0:0:0: [sdb] Attached SCSI disk [ 3.226013] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.226019] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.226293] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.382695] sda: sda1 [ 3.384814] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.679586] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 3.809246] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid) [ 3.823656] systemd[1]: Detected architecture x86-64. [ 3.826761] systemd[1]: Set hostname to . [ 3.911941] systemd[1]: Created slice system-getty.slice. [ 3.912029] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.912093] systemd[1]: Listening on Journal Socket. [ 3.912145] systemd[1]: Listening on udev Control Socket. [ 3.912155] systemd[1]: Reached target Remote File Systems. [ 3.912296] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.912457] systemd[1]: Created slice Virtual Machine and Container Slice. [ 3.937610] EXT4-fs (sdb2): re-mounted. Opts: data=ordered,discard [ 3.940724] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.948098] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.948179] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.948212] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 3.955232] vboxdrv: loading out-of-tree module taints kernel. [ 3.962426] vboxdrv: Found 4 processor cores [ 3.986851] vboxdrv: TSC mode is Invariant, tentative frequency 2591570332 Hz [ 3.986854] vboxdrv: Successfully loaded version 5.2.10 (interface 0x00290001) [ 3.988789] VBoxPciLinuxInit [ 3.988795] vboxpci: IOMMU not found (not registered) [ 3.990444] VBoxNetAdp: Successfully started. [ 3.991592] VBoxNetFlt: Successfully started. [ 4.008084] systemd-journald[229]: Received request to flush runtime journal from PID 1 [ 4.088635] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPC.PMIO) (20180105/utaddress-247) [ 4.088643] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.088646] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20180105/utaddress-247) [ 4.088651] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.088652] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20180105/utaddress-247) [ 4.088655] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.088656] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20180105/utaddress-247) [ 4.088659] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.088660] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 4.092595] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.110276] pps_core: LinuxPPS API ver. 1 registered [ 4.110278] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 4.129437] rtc_cmos 00:02: RTC can wake from S4 [ 4.131072] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 4.131111] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.135320] ACPI: AC Adapter [AC] (off-line) [ 4.137684] Linux agpgart interface v0.103 [ 4.141797] PTP clock support registered [ 4.150129] ACPI: Battery Slot [BAT0] (battery present) [ 4.157503] Non-volatile memory driver v1.3 [ 4.176815] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 4.176816] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.184474] thinkpad_acpi: ThinkPad ACPI Extras v0.25 [ 4.184476] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 4.184477] thinkpad_acpi: ThinkPad BIOS 83ET75WW (1.45 ), EC unknown [ 4.184478] thinkpad_acpi: Lenovo ThinkPad T420, model 4177X07 [ 4.191829] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4.192485] thinkpad_acpi: radio switch found; radios are enabled [ 4.192651] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 4.192652] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 4.196249] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 4.201640] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5 [ 4.211521] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 4.225260] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 4.225263] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 4.225264] RAPL PMU: hw unit of domain package 2^-16 Joules [ 4.225264] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 4.235240] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.237196] cryptd: max_cpu_qlen set to 1000 [ 4.253054] AVX version of gcm_enc/dec engaged. [ 4.253056] AES CTR mode by8 optimization enabled [ 4.268341] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.270280] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.270283] cfg80211: failed to load regulatory.db [ 4.312838] Adding 16777212k swap on /dev/sdb1. Priority:-2 extents:1 across:16777212k SSFS [ 4.326848] Intel(R) Wireless WiFi driver for Linux [ 4.326850] Copyright(c) 2003- 2015 Intel Corporation [ 4.327079] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 4.332547] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 4.333815] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 4.428142] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 4.428144] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 4.428146] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 4.428148] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 [ 4.442851] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered,discard [ 4.465995] intel_rapl: Found RAPL domain package [ 4.465998] intel_rapl: Found RAPL domain core [ 4.465999] intel_rapl: Found RAPL domain uncore [ 4.466007] intel_rapl: RAPL package 0 domain package locked by BIOS [ 4.479511] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 4.507559] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:69:72:ed [ 4.507569] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 4.507604] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF [ 4.507830] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 4.558512] iTCO_vendor_support: vendor-support=0 [ 4.560727] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 4.560781] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 4.565167] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.618605] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 4.647130] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0 [ 4.674447] i915: unknown parameter 'enable_rc6' ignored [ 4.674450] Setting dangerous option enable_fbc - tainting kernel [ 4.674453] i915: unknown parameter 'semaphores' ignored [ 4.674974] [drm:i915_driver_load [i915]] Found CougarPoint PCH [ 4.675011] [drm:intel_power_domains_init [i915]] Allowed DC state mask 00 [ 4.676632] [drm:i915_driver_load [i915]] ppgtt mode: 1 [ 4.676674] [drm:intel_uc_sanitize_options [i915]] enable_guc=0 (submission:no huc:no) [ 4.676761] [drm:i915_ggtt_probe_hw [i915]] GGTT size = 2048M [ 4.676795] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M [ 4.676827] [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M [ 4.676831] checking generic (e0000000 300000) vs hw (e0000000 10000000) [ 4.676832] fb: switching to inteldrmfb from VESA VGA [ 4.676856] Console: switching to colour dummy device 80x25 [ 4.676967] [drm] Replacing VGA console driver [ 4.677028] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 65536K [ 4.677075] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xdaef6018 [ 4.677138] [drm:intel_opregion_setup [i915]] Public ACPI methods supported [ 4.677173] [drm:intel_opregion_setup [i915]] SWSCI supported [ 4.677726] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000483, SBCB callbacks 00000203 [ 4.677764] [drm:intel_opregion_setup [i915]] ASLE supported [ 4.677801] [drm:intel_opregion_setup [i915]] ASLE extension supported [ 4.677837] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 4.677922] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params [ 4.677923] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.677924] [drm] Driver supports precise vblank timestamp query. [ 4.677962] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz [ 4.678000] [drm:intel_bios_init [i915]] VBT signature "$VBT SANDYBRIDGE-M ", BDB version 161 [ 4.678036] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 4.678071] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 [ 4.678113] [drm:intel_opregion_get_panel_type [i915]] Failed to get panel details from OpRegion (-22) [ 4.678150] [drm:intel_bios_init [i915]] Panel type: 2 (VBT) [ 4.678184] [drm:intel_bios_init [i915]] DRRS supported mode is static [ 4.678219] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables: [ 4.678236] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x900" 0 107800 1600 1648 1680 1920 900 903 908 936 0x8 0xa [ 4.678270] [drm:intel_bios_init [i915]] VBT initial LVDS value 30033c [ 4.678302] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 220 Hz, active high, min brightness 0, level 0, controller 0 [ 4.678334] [drm:intel_bios_init [i915]] Found SDVO panel mode in BIOS VBT tables: [ 4.678347] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 4.678376] [drm:intel_bios_init [i915]] DRRS State Enabled:1 [ 4.678407] [drm:intel_bios_init [i915]] No PSR BDB found. [ 4.678436] [drm:intel_bios_init [i915]] No SDVO device info is found in VBT [ 4.678490] [drm:intel_dsm_detect [i915]] no _DSM method for intel device [ 4.678529] [drm:i915_driver_load [i915]] rawclk rate: 125000 kHz [ 4.678566] [drm:intel_power_well_enable [i915]] enabling always-on [ 4.678990] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 [ 4.679029] [drm:intel_print_wm_latency [i915]] Primary WM0 latency 7 (0.7 usec) [ 4.679064] [drm:intel_print_wm_latency [i915]] Primary WM1 latency 3 (1.5 usec) [ 4.679096] [drm:intel_print_wm_latency [i915]] Primary WM2 latency 4 (2.0 usec) [ 4.679129] [drm:intel_print_wm_latency [i915]] Primary WM3 latency 22 (11.0 usec) [ 4.679161] [drm:intel_print_wm_latency [i915]] Sprite WM0 latency 7 (0.7 usec) [ 4.679193] [drm:intel_print_wm_latency [i915]] Sprite WM1 latency 3 (1.5 usec) [ 4.679222] [drm:intel_print_wm_latency [i915]] Sprite WM2 latency 4 (2.0 usec) [ 4.680977] [drm:intel_print_wm_latency [i915]] Sprite WM3 latency 22 (11.0 usec) [ 4.681015] [drm:intel_print_wm_latency [i915]] Cursor WM0 latency 7 (0.7 usec) [ 4.681051] [drm:intel_print_wm_latency [i915]] Cursor WM1 latency 3 (1.5 usec) [ 4.684440] [drm:intel_print_wm_latency [i915]] Cursor WM2 latency 4 (2.0 usec) [ 4.684475] [drm:intel_print_wm_latency [i915]] Cursor WM3 latency 22 (11.0 usec) [ 4.684511] [drm:intel_init_pm [i915]] WM latency values increased to avoid potential underruns [ 4.684546] [drm:intel_print_wm_latency [i915]] Primary WM0 latency 12 (1.2 usec) [ 4.684580] [drm:intel_print_wm_latency [i915]] Primary WM1 latency 3 (1.5 usec) [ 4.684613] [drm:intel_print_wm_latency [i915]] Primary WM2 latency 4 (2.0 usec) [ 4.684646] [drm:intel_print_wm_latency [i915]] Primary WM3 latency 22 (11.0 usec) [ 4.684678] [drm:intel_print_wm_latency [i915]] Sprite WM0 latency 12 (1.2 usec) [ 4.684710] [drm:intel_print_wm_latency [i915]] Sprite WM1 latency 3 (1.5 usec) [ 4.684743] [drm:intel_print_wm_latency [i915]] Sprite WM2 latency 4 (2.0 usec) [ 4.684773] [drm:intel_print_wm_latency [i915]] Sprite WM3 latency 22 (11.0 usec) [ 4.684801] [drm:intel_print_wm_latency [i915]] Cursor WM0 latency 12 (1.2 usec) [ 4.684830] [drm:intel_print_wm_latency [i915]] Cursor WM1 latency 3 (1.5 usec) [ 4.684859] [drm:intel_print_wm_latency [i915]] Cursor WM2 latency 4 (2.0 usec) [ 4.684912] [drm:intel_print_wm_latency [i915]] Cursor WM3 latency 22 (11.0 usec) [ 4.684956] [drm:intel_modeset_init [i915]] 2 display pipes available. [ 4.685032] [drm:intel_modeset_init [i915]] FDI PLL freq=270000 [ 4.685070] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 400000 kHz, VCO 0 kHz, ref 0 kHz, voltage level 0 [ 4.685109] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 400000 kHz [ 4.685147] [drm:intel_modeset_init [i915]] Max dotclock rate: 360000 kHz [ 4.685153] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.685517] [drm:intel_lvds_init [i915]] LVDS PPS:t1+t2 300 t3 300 t4 5000 t5 3000 tx 2000 divider 6249 port 0 powerdown_on_reset 1 [ 4.720464] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 4.720479] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 4.720503] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 4.720560] [drm:intel_lvds_init [i915]] using preferred mode from EDID: [ 4.720575] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"1600x900" 60 107800 1600 1648 1680 1920 900 903 908 936 0x48 0xa [ 4.720621] [drm:intel_panel_setup_backlight [i915]] Connector LVDS-1 backlight initialized, enabled, brightness 4437/4437 [ 4.720663] [drm:intel_lvds_init [i915]] detected dual-link lvds configuration [ 4.720719] [drm:intel_crt_reset [i915]] crt adpa set to 0xf40000 [ 4.720765] [drm:intel_init_pch_refclk [i915]] has_panel 1 has_lvds 1 has_ck505 0 using_ssc_source 1 [ 4.720807] [drm:intel_init_pch_refclk [i915]] Using SSC on panel [ 4.721272] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1 [ 4.721310] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1 [ 4.721345] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1 [ 4.721381] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:37:pipe A] hw state readout: enabled [ 4.721416] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0 [ 4.721449] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0 [ 4.721484] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0 [ 4.721519] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:47:pipe B] hw state readout: disabled [ 4.721559] [drm:intel_modeset_setup_hw_state [i915]] PCH DPLL A hw state readout: crtc_mask 0x00000001, on 1 [ 4.721598] [drm:intel_modeset_setup_hw_state [i915]] PCH DPLL B hw state readout: crtc_mask 0x00000000, on 0 [ 4.721635] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:49:LVDS] hw state readout: enabled, pipe A [ 4.721669] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:55:CRT] hw state readout: disabled, pipe A [ 4.721703] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:48:LVDS-1] hw state readout: enabled [ 4.721737] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:54:VGA-1] hw state readout: disabled [ 4.721782] [drm:intel_dump_pipe_config [i915]] [CRTC:37:pipe A][setup_hw_state] [ 4.721817] [drm:intel_dump_pipe_config [i915]] output_types: LVDS (0x10) [ 4.721852] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 18, dithering: 0 [ 4.721887] [drm:intel_dump_pipe_config [i915]] fdi: lanes: 4; gmch_m: 1883941, gmch_n: 8388608, link_m: 209326, link_n: 524288, tu: 64 [ 4.721920] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 4.721951] [drm:intel_dump_pipe_config [i915]] requested mode: [ 4.721972] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x900" 60 108214 1600 1648 1680 1920 900 903 908 936 0x40 0xa [ 4.722007] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 4.722022] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x900" 60 108214 1600 1648 1680 1920 900 903 908 936 0x40 0xa [ 4.722058] [drm:intel_dump_pipe_config [i915]] crtc timings: 108214 1600 1648 1680 1920 900 903 908 936, type: 0x40 flags: 0xa [ 4.722094] [drm:intel_dump_pipe_config [i915]] port clock: 108214, pipe src size: 1024x768, pixel rate 108214 [ 4.722128] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x06400384, enabled [ 4.722160] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 4.722197] [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0x89086008, dpll_md: 0x0, fp0: 0x21009, fp1: 0x30d07 [ 4.722238] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 4.722281] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] disabled, scaler_id = 0 [ 4.722317] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = 0 [ 4.722353] [drm:intel_dump_pipe_config [i915]] [PLANE:34:cursor A] disabled, scaler_id = 0 [ 4.722388] [drm:intel_dump_pipe_config [i915]] [CRTC:47:pipe B][setup_hw_state] [ 4.722419] [drm:intel_dump_pipe_config [i915]] output_types: (0x0) [ 4.722451] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0 [ 4.722483] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 4.722514] [drm:intel_dump_pipe_config [i915]] requested mode: [ 4.722531] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 4.722562] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 4.722575] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 4.722608] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 4.722640] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 4.722672] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 4.722704] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 4.722740] [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 4.722771] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 4.722803] [drm:intel_dump_pipe_config [i915]] [PLANE:38:primary B] disabled, scaler_id = 0 [ 4.722834] [drm:intel_dump_pipe_config [i915]] [PLANE:41:sprite B] disabled, scaler_id = 0 [ 4.722866] [drm:intel_dump_pipe_config [i915]] [PLANE:44:cursor B] disabled, scaler_id = 0 [ 4.722910] [drm:i9xx_get_initial_plane_config [i915]] pipe A/primary A with fb: size=1024x768@32, offset=0, pitch 4096, size 0x300000 [ 4.722949] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, gtt_offset=0x0000000000000000, size=0x0000000000300000 [ 4.722997] [drm:intel_alloc_initial_plane_obj.isra.85 [i915]] initial plane fb obj 000000009d4801ee [ 4.723052] [drm:intel_modeset_init [i915]] pipe A active planes 0x1 [ 4.725486] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [301000, 80000000] [ 4.727812] [drm:i915_ppgtt_create [i915]] Allocated pde space (2M) at GTT entry: 7fe00 [ 4.727851] [drm:i915_ppgtt_create [i915]] Adding PPGTT at offset 7fe00000 [ 4.727895] [drm:i915_gem_contexts_init [i915]] logical context support initialized [ 4.729492] [drm:intel_engine_init_common [i915]] rcs0 hws offset: 0x7fdfd000 [ 4.729545] [drm:intel_engine_create_scratch [i915]] rcs0 pipe control offset: 0x7fdfc000 [ 4.729641] [drm:intel_engine_init_common [i915]] bcs0 hws offset: 0x7fdfb000 [ 4.735739] [drm:intel_engine_init_common [i915]] vcs0 hws offset: 0x7fdfa000 [ 4.735790] [drm:intel_init_gt_powersave [i915]] Overclocking supported, max: 1300MHz, overclock: 1300MHz [ 4.735850] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 0 [ 4.735924] [drm:i915_gem_init [i915]] Wrong MCH_SSKPD value: 0x16040307 This can cause underruns. [ 4.736190] [drm:intel_fbdev_init [i915]] found possible fb from plane A [ 4.736232] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping [ 4.736323] [drm:intel_fbdev_init [i915]] checking plane A for BIOS fb [ 4.736361] [drm:intel_fbdev_init [i915]] fb not wide enough for plane A (6400 vs 4096) [ 4.736397] [drm:intel_fbdev_init [i915]] BIOS fb not suitable for all pipes, not using [ 4.737800] [drm:intel_backlight_device_register [i915]] Connector LVDS-1 backlight sysfs interface registered [ 4.737842] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0 [ 4.737991] [drm:intel_opregion_register [i915]] 2 outputs detected [ 4.738487] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 4.739176] [drm:asle_work [i915]] bclp = 0x80000007 [ 4.739218] [drm:asle_work [i915]] updating opregion backlight 7/255 [ 4.739260] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 122 [ 4.739302] [drm:asle_work [i915]] PWM freq is not supported [ 4.740540] [drm:asle_work [i915]] bclp = 0x800000ff [ 4.740586] [drm:asle_work [i915]] updating opregion backlight 255/255 [ 4.740630] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 4437 [ 4.740671] [drm:asle_work [i915]] PWM freq is not supported [ 4.741109] acpi device:00: registered as cooling_device5 [ 4.741217] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 4.741406] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.741417] i915 device info: pciid=0x0126 rev=0x09 platform=SANDYBRIDGE gen=6 [ 4.741419] i915 device info: is_mobile: yes [ 4.741420] i915 device info: is_lp: no [ 4.741421] i915 device info: is_alpha_support: no [ 4.741422] i915 device info: has_64bit_reloc: no [ 4.741423] i915 device info: has_aliasing_ppgtt: yes [ 4.741424] i915 device info: has_csr: no [ 4.741425] i915 device info: has_ddi: no [ 4.741426] i915 device info: has_dp_mst: no [ 4.741427] i915 device info: has_reset_engine: no [ 4.741428] i915 device info: has_fbc: yes [ 4.741429] i915 device info: has_fpga_dbg: no [ 4.741430] i915 device info: has_full_ppgtt: no [ 4.741431] i915 device info: has_full_48bit_ppgtt: no [ 4.741432] i915 device info: has_gmch_display: no [ 4.741433] i915 device info: has_guc: no [ 4.741434] i915 device info: has_guc_ct: no [ 4.741435] i915 device info: has_hotplug: yes [ 4.741436] i915 device info: has_l3_dpf: no [ 4.741437] i915 device info: has_llc: yes [ 4.741438] i915 device info: has_logical_ring_contexts: no [ 4.741439] i915 device info: has_logical_ring_preemption: no [ 4.741440] i915 device info: has_overlay: no [ 4.741441] i915 device info: has_pooled_eu: no [ 4.741442] i915 device info: has_psr: no [ 4.741442] i915 device info: has_rc6: yes [ 4.741443] i915 device info: has_rc6p: yes [ 4.741444] i915 device info: has_resource_streamer: no [ 4.741445] i915 device info: has_runtime_pm: no [ 4.741446] i915 device info: has_snoop: no [ 4.741447] i915 device info: unfenced_needs_alignment: no [ 4.741448] i915 device info: cursor_needs_physical: no [ 4.741449] i915 device info: hws_needs_physical: no [ 4.741450] i915 device info: overlay_needs_physical: no [ 4.741451] i915 device info: supports_tv: no [ 4.741452] i915 device info: has_ipc: no [ 4.741453] i915 device info: slice mask: 0000 [ 4.741454] i915 device info: slice total: 0 [ 4.741455] i915 device info: subslice total: 0 [ 4.741457] i915 device info: subslice mask 0000 [ 4.741457] i915 device info: subslice per slice: 0 [ 4.741458] i915 device info: EU total: 0 [ 4.741459] i915 device info: EU per subslice: 0 [ 4.741460] i915 device info: has slice power gating: no [ 4.741461] i915 device info: has subslice power gating: no [ 4.741462] i915 device info: has EU power gating: no [ 4.741463] i915 device info: CS timestamp frequency: 12500 kHz [ 4.741708] [drm:drm_setup_crtcs [drm_kms_helper]] [ 4.741725] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] [ 4.741779] [drm:intel_lvds_detect [i915]] [CONNECTOR:48:LVDS-1] [ 4.741797] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] status updated from unknown to connected [ 4.741827] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 4.741854] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 4.741903] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] probed modes : [ 4.741918] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"1600x900" 60 107800 1600 1648 1680 1920 900 903 908 936 0x48 0xa [ 4.741939] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] [ 4.741990] [drm:intel_crt_detect [i915]] [CONNECTOR:54:VGA-1] force=1 [ 4.742046] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0xf40000 [ 4.751380] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0 [ 4.751425] [drm:intel_crt_detect [i915]] CRT not detected via hotplug [ 4.751646] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 4.751686] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry [ 4.751907] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 4.751928] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 4.751969] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 4.752009] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 4.752761] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 4.752821] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 4.752864] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] [ 4.752876] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] status updated from unknown to disconnected [ 4.752887] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] disconnected [ 4.752895] [drm:drm_setup_crtcs [drm_kms_helper]] connector 48 enabled? yes [ 4.752901] [drm:drm_setup_crtcs [drm_kms_helper]] connector 54 enabled? no [ 4.752941] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 4.752949] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 48 [ 4.752956] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 48 0 [ 4.752962] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1600x900 [ 4.752968] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 8192x8192 config [ 4.752976] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1600x900 set on crtc 37 (0,0) [ 4.753016] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one [ 4.753858] [drm:intelfb_create [i915]] allocated 1600x900 fb: 0x00361000 [ 4.754665] fbcon: inteldrmfb (fb0) is primary device [ 4.754790] [drm:intel_atomic_check [i915]] [CONNECTOR:48:LVDS-1] checking for sink bpp constrains [ 4.754831] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to default limit of 24 [ 4.754873] [drm:intel_lvds_compute_config [i915]] forcing display bpp (was 24) to LVDS (18) [ 4.754913] [drm:intel_atomic_check [i915]] checking fdi config on pipe A, lanes 1 [ 4.754951] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 4.754990] [drm:intel_dump_pipe_config [i915]] [CRTC:37:pipe A][modeset] [ 4.755027] [drm:intel_dump_pipe_config [i915]] output_types: LVDS (0x10) [ 4.755063] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 18, dithering: 1 [ 4.755101] [drm:intel_dump_pipe_config [i915]] fdi: lanes: 1; gmch_m: 3767883, gmch_n: 4194304, link_m: 209326, link_n: 524288, tu: 64 [ 4.755136] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 4.755167] [drm:intel_dump_pipe_config [i915]] requested mode: [ 4.755186] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x900" 60 107800 1600 1648 1680 1920 900 903 908 936 0x48 0xa [ 4.755219] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 4.755232] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x900" 60 107800 1600 1648 1680 1920 900 903 908 936 0x48 0xa [ 4.755264] [drm:intel_dump_pipe_config [i915]] crtc timings: 107800 1600 1648 1680 1920 900 903 908 936, type: 0x48 flags: 0xa [ 4.755297] [drm:intel_dump_pipe_config [i915]] port clock: 107800, pipe src size: 1600x900, pixel rate 107800 [ 4.755329] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 4.755358] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 4.755395] [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0x89086008, dpll_md: 0x0, fp0: 0x21009, fp1: 0x30d07 [ 4.755426] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 4.755456] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] FB:57, fb = 1024x768 format = XR24 little-endian (0x34325258) [ 4.755486] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = 0 [ 4.755515] [drm:intel_dump_pipe_config [i915]] [PLANE:34:cursor A] disabled, scaler_id = 0 [ 4.755553] [drm:ironlake_crtc_compute_clock [i915]] using SSC reference clock of 120000 kHz [ 4.755614] [drm:intel_find_shared_dpll [i915]] [CRTC:37:pipe A] allocated PCH DPLL A [ 4.755650] [drm:intel_reference_shared_dpll [i915]] using PCH DPLL A for pipe A [ 4.755724] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 4.755767] [drm:intel_disable_pipe [i915]] disabling pipe A [ 4.935104] NET: Registered protocol family 3 [ 4.955162] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing. [ 4.955864] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker [ 4.955867] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.955869] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0) [ 4.955871] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 [ 4.955872] snd_hda_codec_conexant hdaudioC0D0: inputs: [ 4.955874] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23 [ 4.955876] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b [ 4.955877] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a [ 4.957204] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication [ 4.964584] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 4.964754] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 4.964815] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 4.964872] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 4.964929] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 4.978911] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 4.994941] [drm:intel_disable_shared_dpll [i915]] disable PCH DPLL A (active 1, on? 1) for crtc 37 [ 4.994975] [drm:intel_disable_shared_dpll [i915]] disabling PCH DPLL A [ 4.995214] [drm:intel_atomic_commit_tail [i915]] [ENCODER:49:LVDS] [ 4.995241] [drm:intel_atomic_commit_tail [i915]] [ENCODER:55:CRT] [ 4.995267] [drm:verify_single_dpll_state.isra.38 [i915]] PCH DPLL A [ 4.995295] [drm:verify_single_dpll_state.isra.38 [i915]] PCH DPLL B [ 4.995331] [drm:intel_prepare_shared_dpll [i915]] setting up PCH DPLL A [ 4.995907] [drm:intel_enable_pipe [i915]] enabling pipe A [ 4.996761] [drm:gen6_fdi_link_train [i915]] FDI_RX_IIR 0x700 [ 4.996795] [drm:gen6_fdi_link_train [i915]] FDI train 1 done. [ 4.997482] [drm:gen6_fdi_link_train [i915]] FDI_RX_IIR 0x600 [ 4.997506] [drm:gen6_fdi_link_train [i915]] FDI train 2 done. [ 4.997530] [drm:ironlake_crtc_enable [i915]] FDI train done. [ 4.997559] [drm:intel_enable_shared_dpll [i915]] enable PCH DPLL A (active 1, on? 0) for crtc 37 [ 4.997584] [drm:intel_enable_shared_dpll [i915]] enabling PCH DPLL A [ 5.018796] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820] [ 5.109940] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 578367 [ 5.109955] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 5.159967] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 5.169732] mousedev: PS/2 mouse device common for all mice [ 5.270108] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 5.356315] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 5.570275] [drm:intel_panel_enable_backlight [i915]] pipe A [ 5.570432] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 4437 [ 5.581899] [drm:intel_fbc_enable [i915]] reserved 11520000 bytes of contiguous stolen space for FBC, threshold: 1 [ 5.582026] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 5.598569] [drm:verify_connector_state.isra.76 [i915]] [CONNECTOR:48:LVDS-1] [ 5.598721] [drm:intel_atomic_commit_tail [i915]] [CRTC:37:pipe A] [ 5.598853] [drm:verify_single_dpll_state.isra.38 [i915]] PCH DPLL A [ 5.599010] Console: switching to colour frame buffer device 200x56 [ 5.625323] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 5.642411] [drm:drm_fb_helper_hotplug_event.part.28 [drm_kms_helper]] [ 5.642418] [drm:drm_setup_crtcs [drm_kms_helper]] [ 5.642426] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] [ 5.642483] [drm:intel_lvds_detect [i915]] [CONNECTOR:48:LVDS-1] [ 5.642526] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 5.642539] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 5.642577] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] probed modes : [ 5.642590] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"1600x900" 60 107800 1600 1648 1680 1920 900 903 908 936 0x48 0xa [ 5.642597] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] [ 5.642634] [drm:intel_crt_detect [i915]] [CONNECTOR:54:VGA-1] force=1 [ 5.642666] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0 [ 5.642695] [drm:intel_crt_detect [i915]] CRT not detected via hotplug [ 5.643504] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 5.643534] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry [ 5.643707] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 5.643725] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 5.643755] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 5.643783] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 5.644527] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 5.644565] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 5.644595] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] [ 5.644605] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] disconnected [ 5.644614] [drm:drm_setup_crtcs [drm_kms_helper]] connector 48 enabled? yes [ 5.644621] [drm:drm_setup_crtcs [drm_kms_helper]] connector 54 enabled? no [ 5.644653] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 5.644660] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 48 [ 5.644667] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 48 0 [ 5.644673] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1600x900 [ 5.644679] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1600x900 config [ 5.644688] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1600x900 set on crtc 37 (0,0) [ 5.648238] [drm:drm_fb_helper_hotplug_event.part.28 [drm_kms_helper]] [ 5.648254] [drm:drm_setup_crtcs [drm_kms_helper]] [ 5.648270] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] [ 5.648308] [drm:intel_lvds_detect [i915]] [CONNECTOR:48:LVDS-1] [ 5.648349] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 5.648362] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 5.648387] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] probed modes : [ 5.648401] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"1600x900" 60 107800 1600 1648 1680 1920 900 903 908 936 0x48 0xa [ 5.648418] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] [ 5.648447] [drm:intel_crt_detect [i915]] [CONNECTOR:54:VGA-1] force=1 [ 5.648478] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0 [ 5.648505] [drm:intel_crt_detect [i915]] CRT not detected via hotplug [ 5.648739] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 5.648768] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry [ 5.648989] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 5.649003] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 5.649031] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 5.649059] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 5.649897] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 5.649931] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 5.649957] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] [ 5.649967] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] disconnected [ 5.649976] [drm:drm_setup_crtcs [drm_kms_helper]] connector 48 enabled? yes [ 5.649982] [drm:drm_setup_crtcs [drm_kms_helper]] connector 54 enabled? no [ 5.650011] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 5.650162] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 48 [ 5.650169] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 48 0 [ 5.650176] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1600x900 [ 5.650182] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1600x900 config [ 5.650191] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1600x900 set on crtc 37 (0,0) [ 5.669056] [drm:asle_work [i915]] bclp = 0x80000040 [ 5.669084] [drm:asle_work [i915]] updating opregion backlight 64/255 [ 5.669113] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 1114 [ 5.669141] [drm:asle_work [i915]] PWM freq is not supported [ 5.861209] random: crng init done [ 5.865493] [drm:drm_mode_addfb2 [drm]] [FB:57] [ 5.887910] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 5.972707] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] [ 5.972749] [drm:intel_lvds_detect [i915]] [CONNECTOR:48:LVDS-1] [ 5.972766] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 5.972777] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 5.972803] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] probed modes : [ 5.972816] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"1600x900" 60 107800 1600 1648 1680 1920 900 903 908 936 0x48 0xa [ 5.972879] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] [ 5.972908] [drm:intel_crt_detect [i915]] [CONNECTOR:54:VGA-1] force=1 [ 5.972939] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0 [ 5.972964] [drm:intel_crt_detect [i915]] CRT not detected via hotplug [ 5.973201] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 5.973227] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry [ 5.973438] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 5.973458] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 5.973493] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 5.973531] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 5.974327] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 5.974367] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 5.974402] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] [ 5.974411] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] disconnected [ 5.974575] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] [ 5.974613] [drm:intel_lvds_detect [i915]] [CONNECTOR:48:LVDS-1] [ 5.974630] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 5.974646] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 5.974675] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] probed modes : [ 5.974700] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"1600x900" 60 107800 1600 1648 1680 1920 900 903 908 936 0x48 0xa [ 5.976143] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] [ 5.976190] [drm:intel_crt_detect [i915]] [CONNECTOR:54:VGA-1] force=1 [ 5.976233] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0 [ 5.976270] [drm:intel_crt_detect [i915]] CRT not detected via hotplug [ 5.976488] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 5.976523] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry [ 5.976753] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 5.976781] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 5.976807] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 5.976834] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 5.977603] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 5.977634] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 5.977661] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] [ 5.977671] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] disconnected [ 6.138469] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14 [ 6.212928] tun: Universal TUN/TAP device driver, 1.6 [ 6.214374] virbr0: port 1(virbr0-nic) entered blocking state [ 6.214377] virbr0: port 1(virbr0-nic) entered disabled state [ 6.214424] device virbr0-nic entered promiscuous mode [ 6.365790] virbr0: port 1(virbr0-nic) entered blocking state [ 6.365794] virbr0: port 1(virbr0-nic) entered listening state [ 6.407932] virbr0: port 1(virbr0-nic) entered disabled state [ 6.530541] [drm:drm_mode_addfb2 [drm]] [FB:60] [ 6.530579] [drm:drm_mode_setcrtc [drm]] [CRTC:37:pipe A] [ 6.530623] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:48:LVDS-1] [ 6.563836] [drm:drm_mode_setcrtc [drm]] [CRTC:47:pipe B] [ 6.967331] fuse init (API version 7.26) [ 10.287763] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 15.811865] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 16.105235] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 16.189037] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 16.515351] e1000e: enp0s25 NIC Link is Down [ 16.764392] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 16.819840] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 17.112004] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 17.195772] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 20.381103] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] [ 20.381136] [drm:intel_lvds_detect [i915]] [CONNECTOR:48:LVDS-1] [ 20.381150] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 20.381158] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 20.381179] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] probed modes : [ 20.381189] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"1600x900" 60 107800 1600 1648 1680 1920 900 903 908 936 0x48 0xa [ 20.381436] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] [ 20.381457] [drm:intel_crt_detect [i915]] [CONNECTOR:54:VGA-1] force=1 [ 20.381480] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0 [ 20.381498] [drm:intel_crt_detect [i915]] CRT not detected via hotplug [ 20.381739] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 20.381758] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry [ 20.382000] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 20.382010] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 20.382029] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 20.382047] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 20.382777] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 20.382796] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 20.382813] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] [ 20.382818] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] disconnected [ 20.383378] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] [ 20.383409] [drm:intel_lvds_detect [i915]] [CONNECTOR:48:LVDS-1] [ 20.383425] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 20.383436] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 20.383459] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] probed modes : [ 20.383473] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"1600x900" 60 107800 1600 1648 1680 1920 900 903 908 936 0x48 0xa [ 20.383767] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] [ 20.383798] [drm:intel_crt_detect [i915]] [CONNECTOR:54:VGA-1] force=1 [ 20.383828] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0 [ 20.383855] [drm:intel_crt_detect [i915]] CRT not detected via hotplug [ 20.384057] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 20.384085] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry [ 20.384284] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 20.384297] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 20.384325] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 20.384352] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 20.385087] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 20.385107] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 20.385124] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] [ 20.385129] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] disconnected [ 20.385727] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] [ 20.385748] [drm:intel_lvds_detect [i915]] [CONNECTOR:48:LVDS-1] [ 20.385758] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 20.385766] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 20.385783] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] probed modes : [ 20.385792] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"1600x900" 60 107800 1600 1648 1680 1920 900 903 908 936 0x48 0xa [ 20.385988] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] [ 20.386007] [drm:intel_crt_detect [i915]] [CONNECTOR:54:VGA-1] force=1 [ 20.386028] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0 [ 20.386045] [drm:intel_crt_detect [i915]] CRT not detected via hotplug [ 20.386229] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 20.386247] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry [ 20.386428] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 20.386438] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 20.386456] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 20.386473] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 20.387242] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 20.387276] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 20.387311] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] [ 20.387320] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] disconnected [ 20.387983] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] [ 20.388012] [drm:intel_lvds_detect [i915]] [CONNECTOR:48:LVDS-1] [ 20.388025] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 20.388037] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 20.388060] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] probed modes : [ 20.388074] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"1600x900" 60 107800 1600 1648 1680 1920 900 903 908 936 0x48 0xa [ 20.388354] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] [ 20.388383] [drm:intel_crt_detect [i915]] [CONNECTOR:54:VGA-1] force=1 [ 20.388412] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0 [ 20.388437] [drm:intel_crt_detect [i915]] CRT not detected via hotplug [ 20.388636] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 20.388662] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry [ 20.388867] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 20.388880] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 20.388906] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 20.388932] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 20.389673] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 20.389700] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 20.389725] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] [ 20.389732] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] disconnected [ 21.140292] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] [ 21.140334] [drm:intel_lvds_detect [i915]] [CONNECTOR:48:LVDS-1] [ 21.140354] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 21.140365] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 21.140392] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] probed modes : [ 21.140405] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"1600x900" 60 107800 1600 1648 1680 1920 900 903 908 936 0x48 0xa [ 21.140754] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] [ 21.140789] [drm:intel_crt_detect [i915]] [CONNECTOR:54:VGA-1] force=1 [ 21.140824] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0 [ 21.140852] [drm:intel_crt_detect [i915]] CRT not detected via hotplug [ 21.141068] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 21.141099] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry [ 21.141300] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 21.141317] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 21.141347] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 21.141376] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 21.142121] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 21.142154] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 21.142183] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] [ 21.142194] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] disconnected [ 21.458374] [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=1154/4437 [ 21.458408] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 1154 [ 22.203955] wlp3s0: authenticate with 92:2a:a8:92:ef:d9 [ 22.208767] wlp3s0: send auth to 92:2a:a8:92:ef:d9 (try 1/3) [ 22.282559] wlp3s0: authenticated [ 22.283580] wlp3s0: associate with 92:2a:a8:92:ef:d9 (try 1/3) [ 22.286328] wlp3s0: RX AssocResp from 92:2a:a8:92:ef:d9 (capab=0x411 status=0 aid=8) [ 22.307469] wlp3s0: associated [ 22.329789] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 22.437193] 8021q: 802.1Q VLAN Support v1.8 [ 33.585447] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun [ 33.585581] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A [ 33.585649] [drm:cpt_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun [ 33.585836] [drm:intel_fbc_underrun_work_fn [i915]] Disabling FBC due to FIFO underrun.