[ 0.000000] Linux version 4.16.11 (root@surfplank2.hierzo) (gcc version 8.1.1 20180502 (Red Hat 8.1.1-1) (GCC)) #9 SMP PREEMPT Thu May 24 07:48:14 CEST 2018 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.16.11 ro root=/dev/myvg/rootlv noexec=on noexec32=on vga=0x0F01 SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us acpi_enforce_resources=lax fbcon=font:VGA8x16 radeon.pcie_gen2=1 cgroup_disable=memory threadirqs plymouth.enable=0 rd.plymouth=0 mce=dont_log_ce panic=0 rd.lvm.vg=myvg radeon.dpm=1 zswap.enabled=1 rd.auto=1 audit=0 systemd.log_level=warning ip=192.168.10.70::192.168.10.98:255.255.255.0:::off:192.168.10.98 rd.neednet=1 net.ifnames=0 initrd=/initramfs-4.16.11.img [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000400a000-0x0000000009cfffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000db678fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db679000-0x00000000db79ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000db7a0000-0x00000000db8cafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db8cb000-0x00000000dbc9cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dbc9d000-0x00000000dceb4fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dceb5000-0x00000000deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd800000-0x00000000fdffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000003deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000003df000000-0x000000041effffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 3.1.1 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. X470 AORUS ULTRA GAMING/X470 AORUS ULTRA GAMING-CF, BIOS F2 03/14/2018 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x3df000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000420000000 aka 16896M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x2c03eb000, 0x2c03ebfff] PGTABLE [ 0.000000] BRK [0x2c03ec000, 0x2c03ecfff] PGTABLE [ 0.000000] BRK [0x2c03ed000, 0x2c03edfff] PGTABLE [ 0.000000] BRK [0x2c03ee000, 0x2c03eefff] PGTABLE [ 0.000000] BRK [0x2c03ef000, 0x2c03effff] PGTABLE [ 0.000000] BRK [0x2c03f0000, 0x2c03f0fff] PGTABLE [ 0.000000] BRK [0x2c03f1000, 0x2c03f1fff] PGTABLE [ 0.000000] BRK [0x2c03f2000, 0x2c03f2fff] PGTABLE [ 0.000000] BRK [0x2c03f3000, 0x2c03f3fff] PGTABLE [ 0.000000] BRK [0x2c03f4000, 0x2c03f4fff] PGTABLE [ 0.000000] BRK [0x2c03f5000, 0x2c03f5fff] PGTABLE [ 0.000000] BRK [0x2c03f6000, 0x2c03f6fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x7ea82000-0x7fffffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000DB8CB098 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DB8D1A10 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180105/tbfadt-658) [ 0.000000] ACPI: DSDT 0x00000000DB8CB1E8 006822 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000DBC86E00 000040 [ 0.000000] ACPI: APIC 0x00000000DB8D1B28 0000DE (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DB8D1C08 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000DB8D1C50 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000DB8D1CF0 005367 (v02 AMD AmdTable 00000002 MSFT 02000002) [ 0.000000] ACPI: SSDT 0x00000000DB8D7058 00119C (v01 AMD AMD CPU 00000001 AMD 00000001) [ 0.000000] ACPI: CRAT 0x00000000DB8D81F8 000810 (v01 AMD AMD CRAT 00000001 AMD 00000001) [ 0.000000] ACPI: CDIT 0x00000000DB8D8A08 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x00000000DB8D8A38 002E6E (v01 AMD AMD AOD 00000001 INTL 20120913) [ 0.000000] ACPI: MCFG 0x00000000DB8DB8A8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 0x00000000DB8DB8E8 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: UEFI 0x00000000DB8DB920 000042 (v01 00000000 00000000) [ 0.000000] ACPI: IVRS 0x00000000DB8DB968 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000) [ 0.000000] ACPI: SSDT 0x00000000DB8DBA38 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DB8DBB30 000E96 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DB8DC9C8 000850 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DB8DD218 001A41 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.000000] ACPI: WSMT 0x00000000DB8DEC60 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: Using PIT calibration value [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000003deffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000003ffffff] [ 0.000000] node 0: [mem 0x000000000400a000-0x0000000009cfffff] [ 0.000000] node 0: [mem 0x000000000a000000-0x000000000affffff] [ 0.000000] node 0: [mem 0x000000000b020000-0x00000000db678fff] [ 0.000000] node 0: [mem 0x00000000db7a0000-0x00000000db8cafff] [ 0.000000] node 0: [mem 0x00000000dceb5000-0x00000000deffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000003deffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000003deffffff] [ 0.000000] On node 0 totalpages: 3917153 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12341 pages used for memmap [ 0.000000] DMA32 zone: 902597 pages, LIFO batch:31 [ 0.000000] Normal zone: 41160 pages used for memmap [ 0.000000] Normal zone: 3010560 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 100 pages [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x8a/0x447 with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 42 pages/cpu @ (ptrval) s132696 r8192 d31144 u262144 [ 0.000000] pcpu-alloc: s132696 r8192 d31144 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3863575 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.16.11 ro root=/dev/myvg/rootlv noexec=on noexec32=on vga=0x0F01 SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us acpi_enforce_resources=lax fbcon=font:VGA8x16 radeon.pcie_gen2=1 cgroup_disable=memory threadirqs plymouth.enable=0 rd.plymouth=0 mce=dont_log_ce panic=0 rd.lvm.vg=myvg radeon.dpm=1 zswap.enabled=1 rd.auto=1 audit=0 systemd.log_level=warning ip=192.168.10.70::192.168.10.98:255.255.255.0:::off:192.168.10.98 rd.neednet=1 net.ifnames=0 initrd=/initramfs-4.16.11.img [ 0.000000] audit: disabled (until reboot) [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Memory: 15317056K/15668612K available (10248K kernel code, 557K rwdata, 2300K rodata, 944K init, 388K bss, 351556K reserved, 0K cma-reserved) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 4352, nr_irqs: 1032, preallocated irqs: 16 [ 0.000000] Console: colour VGA+ 80x50 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180105 [ 0.000000] ACPI BIOS Error (bug): Failure creating [\_SB.SMIC], AE_ALREADY_EXISTS (20180105/dswload-380) [ 0.000000] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180105/psobject-252) [ 0.000000] ACPI Error: AE_ALREADY_EXISTS, (SSDT: AMD PT) while loading table (20180105/tbxfload-228) [ 0.000000] ACPI Error: 1 table load failures, 7 successful (20180105/tbxfload-246) [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.024000] tsc: Fast TSC calibration failed [ 0.032000] tsc: PIT calibration matches HPET. 1 loops [ 0.032000] tsc: Detected 3600.053 MHz processor [ 0.032000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e4859ad6f, max_idle_ns: 440795315104 ns [ 0.032000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.10 BogoMIPS (lpj=14400212) [ 0.032000] pid_max: default: 32768 minimum: 301 [ 0.032000] Security Framework initialized [ 0.032000] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.036019] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.036558] CPU: Physical Processor ID: 0 [ 0.036738] CPU: Processor Core ID: 0 [ 0.037015] mce: CPU supports 23 MCE banks [ 0.037213] LVT offset 1 assigned for vector 0xf9 [ 0.037435] LVT offset 2 assigned for vector 0xf4 [ 0.037629] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.037827] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0 [ 0.040002] Spectre V2 : Mitigation: Full AMD retpoline [ 0.040191] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.040467] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.047085] Freeing SMP alternatives memory: 28K [ 0.052000] smpboot: CPU0: AMD Ryzen 5 2400G with Radeon Vega Graphics (family: 0x17, model: 0x11, stepping: 0x0) [ 0.064008] Performance Events: Fam17h core perfctr, AMD PMU driver. [ 0.064242] ... version: 0 [ 0.064429] ... bit width: 48 [ 0.064610] ... generic registers: 6 [ 0.064788] ... value mask: 0000ffffffffffff [ 0.064980] ... max period: 00007fffffffffff [ 0.065171] ... fixed-purpose events: 0 [ 0.065348] ... event mask: 000000000000003f [ 0.072004] Hierarchical SRCU implementation. [ 0.083334] MCE: In-kernel MCE decoding enabled. [ 0.088003] smp: Bringing up secondary CPUs ... [ 0.116019] x86: Booting SMP configuration: [ 0.116208] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.286213] smp: Brought up 1 node, 8 CPUs [ 0.286213] smpboot: Max logical packages: 1 [ 0.286213] smpboot: Total of 8 processors activated (57600.84 BogoMIPS) [ 0.288003] devtmpfs: initialized [ 0.288390] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288390] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.288581] xor: automatically using best checksumming function avx [ 0.289468] NET: Registered protocol family 16 [ 0.289849] cpuidle: using governor ladder [ 0.289849] cpuidle: using governor menu [ 0.289849] ACPI: bus type PCI registered [ 0.289849] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.289849] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.289849] PCI: Using configuration type 1 for base access [ 0.292817] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.292817] cryptd: max_cpu_qlen set to 1000 [ 0.360005] raid6: sse2x1 gen() 8753 MB/s [ 0.428004] raid6: sse2x1 xor() 9545 MB/s [ 0.496003] raid6: sse2x2 gen() 18102 MB/s [ 0.564001] raid6: sse2x2 xor() 11582 MB/s [ 0.632001] raid6: sse2x4 gen() 18610 MB/s [ 0.700002] raid6: sse2x4 xor() 11141 MB/s [ 0.768001] raid6: avx2x1 gen() 20154 MB/s [ 0.836001] raid6: avx2x1 xor() 15621 MB/s [ 0.904001] raid6: avx2x2 gen() 25103 MB/s [ 0.972001] raid6: avx2x2 xor() 16681 MB/s [ 1.040001] raid6: avx2x4 gen() 26821 MB/s [ 1.108003] raid6: avx2x4 xor() 16409 MB/s [ 1.108195] raid6: using algorithm avx2x4 gen() 26821 MB/s [ 1.108390] raid6: .... xor() 16409 MB/s, rmw enabled [ 1.108581] raid6: using avx2x2 recovery algorithm [ 1.108816] ACPI: Added _OSI(Module Device) [ 1.108816] ACPI: Added _OSI(Processor Device) [ 1.108816] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.108816] ACPI: Added _OSI(Processor Aggregator Device) [ 1.108868] ACPI BIOS Error (bug): Failure looking up [\PTOS], AE_NOT_FOUND (20180105/psargs-364) [ 1.108868] ACPI Error: Method parse/execution failed \, AE_NOT_FOUND (20180105/psparse-550) [ 1.108868] ACPI: Executed 2 blocks of module-level executable AML code [ 1.112334] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 1.113588] ACPI: Interpreter enabled [ 1.113769] ACPI: (supports S0 S5) [ 1.113936] ACPI: Using IOAPIC for interrupt routing [ 1.114360] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.114810] ACPI: Enabled 3 GPEs in block 00 to 1F [ 1.116756] ACPI: Power Resource [P0ST] (on) [ 1.116972] ACPI: Power Resource [P3ST] (on) [ 1.120711] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.120918] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.121327] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 1.121603] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 1.122033] PCI host bridge to bus 0000:00 [ 1.122218] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.122425] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.122632] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.122839] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.123046] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.123311] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 1.123577] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window] [ 1.123841] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ 1.124003] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.124203] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000 [ 1.124308] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600 [ 1.124442] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 [ 1.124532] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400 [ 1.124634] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold [ 1.124724] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 [ 1.124819] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400 [ 1.124870] pci 0000:00:08.1: enabling Extended Tags [ 1.125114] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 1.125177] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400 [ 1.125226] pci 0000:00:08.2: enabling Extended Tags [ 1.125464] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold [ 1.125552] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 1.125706] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 1.125866] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000 [ 1.125896] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000 [ 1.125948] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000 [ 1.125985] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000 [ 1.126022] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000 [ 1.126052] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000 [ 1.126089] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000 [ 1.126127] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000 [ 1.126225] pci 0000:01:00.0: [1022:43d0] type 00 class 0x0c0330 [ 1.126254] pci 0000:01:00.0: reg 0x10: [mem 0xfe8a0000-0xfe8a7fff 64bit] [ 1.126354] pci 0000:01:00.0: PME# supported from D3hot D3cold [ 1.126421] pci 0000:01:00.1: [1022:43c8] type 00 class 0x010601 [ 1.126482] pci 0000:01:00.1: reg 0x24: [mem 0xfe880000-0xfe89ffff] [ 1.126491] pci 0000:01:00.1: reg 0x30: [mem 0xfe800000-0xfe87ffff pref] [ 1.126541] pci 0000:01:00.1: PME# supported from D3hot D3cold [ 1.126596] pci 0000:01:00.2: [1022:43c6] type 01 class 0x060400 [ 1.126692] pci 0000:01:00.2: PME# supported from D3hot D3cold [ 1.140026] pci 0000:00:01.2: PCI bridge to [bus 01-08] [ 1.140231] pci 0000:00:01.2: bridge window [io 0xd000-0xefff] [ 1.140235] pci 0000:00:01.2: bridge window [mem 0xfe500000-0xfe8fffff] [ 1.140327] pci 0000:02:00.0: [1022:43c7] type 01 class 0x060400 [ 1.140443] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 1.140523] pci 0000:02:01.0: [1022:43c7] type 01 class 0x060400 [ 1.140638] pci 0000:02:01.0: PME# supported from D3hot D3cold [ 1.140718] pci 0000:02:02.0: [1022:43c7] type 01 class 0x060400 [ 1.140833] pci 0000:02:02.0: PME# supported from D3hot D3cold [ 1.140905] pci 0000:02:03.0: [1022:43c7] type 01 class 0x060400 [ 1.141020] pci 0000:02:03.0: PME# supported from D3hot D3cold [ 1.141093] pci 0000:02:04.0: [1022:43c7] type 01 class 0x060400 [ 1.141208] pci 0000:02:04.0: PME# supported from D3hot D3cold [ 1.141287] pci 0000:02:09.0: [1022:43c7] type 01 class 0x060400 [ 1.141402] pci 0000:02:09.0: PME# supported from D3hot D3cold [ 1.141489] pci 0000:01:00.2: PCI bridge to [bus 02-08] [ 1.141694] pci 0000:01:00.2: bridge window [io 0xd000-0xefff] [ 1.141698] pci 0000:01:00.2: bridge window [mem 0xfe500000-0xfe7fffff] [ 1.141772] pci 0000:03:00.0: [9710:9922] type 00 class 0x070002 [ 1.141820] pci 0000:03:00.0: reg 0x10: [io 0xe010-0xe017] [ 1.141840] pci 0000:03:00.0: reg 0x14: [mem 0xfe703000-0xfe703fff] [ 1.141913] pci 0000:03:00.0: reg 0x24: [mem 0xfe702000-0xfe702fff] [ 1.142050] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 1.142144] pci 0000:03:00.1: [9710:9922] type 00 class 0x070002 [ 1.142189] pci 0000:03:00.1: reg 0x10: [io 0xe000-0xe007] [ 1.142209] pci 0000:03:00.1: reg 0x14: [mem 0xfe701000-0xfe701fff] [ 1.142282] pci 0000:03:00.1: reg 0x24: [mem 0xfe700000-0xfe700fff] [ 1.142403] pci 0000:03:00.1: PME# supported from D3hot D3cold [ 1.156024] pci 0000:02:00.0: PCI bridge to [bus 03] [ 1.156220] pci 0000:02:00.0: bridge window [io 0xe000-0xefff] [ 1.156223] pci 0000:02:00.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 1.156276] pci 0000:02:01.0: PCI bridge to [bus 04] [ 1.156517] pci 0000:02:02.0: PCI bridge to [bus 05] [ 1.156794] pci 0000:06:00.0: [8086:1539] type 00 class 0x020000 [ 1.156845] pci 0000:06:00.0: reg 0x10: [mem 0xfe600000-0xfe61ffff] [ 1.156882] pci 0000:06:00.0: reg 0x18: [io 0xd000-0xd01f] [ 1.156901] pci 0000:06:00.0: reg 0x1c: [mem 0xfe620000-0xfe623fff] [ 1.157092] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.168031] pci 0000:02:03.0: PCI bridge to [bus 06] [ 1.168234] pci 0000:02:03.0: bridge window [io 0xd000-0xdfff] [ 1.168237] pci 0000:02:03.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 1.168281] pci 0000:02:04.0: PCI bridge to [bus 07] [ 1.168544] pci 0000:08:00.0: [1b21:1343] type 00 class 0x0c0330 [ 1.168593] pci 0000:08:00.0: reg 0x10: [mem 0xfe500000-0xfe507fff 64bit] [ 1.168773] pci 0000:08:00.0: PME# supported from D3hot D3cold [ 1.180023] pci 0000:02:09.0: PCI bridge to [bus 08] [ 1.180212] pci 0000:02:09.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 1.180322] pci 0000:09:00.0: [1002:15dd] type 00 class 0x030000 [ 1.180369] pci 0000:09:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 1.180387] pci 0000:09:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref] [ 1.180399] pci 0000:09:00.0: reg 0x20: [io 0xf000-0xf0ff] [ 1.180411] pci 0000:09:00.0: reg 0x24: [mem 0xfe400000-0xfe47ffff] [ 1.180431] pci 0000:09:00.0: enabling Extended Tags [ 1.180724] pci 0000:09:00.0: PME# supported from D1 D2 D3hot D3cold [ 1.180828] pci 0000:09:00.1: [1002:15de] type 00 class 0x040300 [ 1.180858] pci 0000:09:00.1: reg 0x10: [mem 0xfe488000-0xfe48bfff] [ 1.180929] pci 0000:09:00.1: enabling Extended Tags [ 1.181184] pci 0000:09:00.1: PME# supported from D1 D2 D3hot D3cold [ 1.181251] pci 0000:09:00.2: [1022:15df] type 00 class 0x108000 [ 1.181301] pci 0000:09:00.2: reg 0x18: [mem 0xfe300000-0xfe3fffff] [ 1.181334] pci 0000:09:00.2: reg 0x24: [mem 0xfe48c000-0xfe48dfff] [ 1.181354] pci 0000:09:00.2: enabling Extended Tags [ 1.181681] pci 0000:09:00.3: [1022:15e0] type 00 class 0x0c0330 [ 1.181716] pci 0000:09:00.3: reg 0x10: [mem 0xfe200000-0xfe2fffff 64bit] [ 1.181777] pci 0000:09:00.3: enabling Extended Tags [ 1.182040] pci 0000:09:00.3: PME# supported from D0 D3hot D3cold [ 1.182109] pci 0000:09:00.4: [1022:15e1] type 00 class 0x0c0330 [ 1.182144] pci 0000:09:00.4: reg 0x10: [mem 0xfe100000-0xfe1fffff 64bit] [ 1.182205] pci 0000:09:00.4: enabling Extended Tags [ 1.182467] pci 0000:09:00.4: PME# supported from D0 D3hot D3cold [ 1.182543] pci 0000:09:00.6: [1022:15e3] type 00 class 0x040300 [ 1.182572] pci 0000:09:00.6: reg 0x10: [mem 0xfe480000-0xfe487fff] [ 1.182644] pci 0000:09:00.6: enabling Extended Tags [ 1.182899] pci 0000:09:00.6: PME# supported from D0 D3hot D3cold [ 1.183036] pci 0000:00:08.1: PCI bridge to [bus 09] [ 1.183228] pci 0000:00:08.1: bridge window [io 0xf000-0xffff] [ 1.183232] pci 0000:00:08.1: bridge window [mem 0xfe100000-0xfe4fffff] [ 1.183237] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 1.183302] pci 0000:0a:00.0: [1022:7901] type 00 class 0x010601 [ 1.183384] pci 0000:0a:00.0: reg 0x24: [mem 0xfe900000-0xfe9007ff] [ 1.183404] pci 0000:0a:00.0: enabling Extended Tags [ 1.183665] pci 0000:0a:00.0: PME# supported from D3hot D3cold [ 1.183763] pci 0000:00:08.2: PCI bridge to [bus 0a] [ 1.183957] pci 0000:00:08.2: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.183990] pci_bus 0000:00: on NUMA node 0 [ 1.184269] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 [ 1.184526] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 [ 1.184774] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 [ 1.185035] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 [ 1.185289] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ 1.185535] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ 1.185786] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 1.186029] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 1.188022] pci 0000:09:00.0: vgaarb: setting as boot VGA device [ 1.188215] pci 0000:09:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.188493] pci 0000:09:00.0: vgaarb: bridge control possible [ 1.188689] vgaarb: loaded [ 1.188943] SCSI subsystem initialized [ 1.189130] libata version 3.00 loaded. [ 1.189130] ACPI: bus type USB registered [ 1.189130] usbcore: registered new interface driver usbfs [ 1.189130] usbcore: registered new interface driver hub [ 1.189130] usbcore: registered new device driver usb [ 1.189130] pps_core: LinuxPPS API ver. 1 registered [ 1.189130] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.189130] EDAC MC: Ver: 3.0.0 [ 1.189130] PCI: Using ACPI for IRQ routing [ 1.192722] PCI: pci_cache_line_size set to 64 bytes [ 1.192832] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 1.192833] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff] [ 1.192834] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff] [ 1.192834] e820: reserve RAM buffer [mem 0xdb679000-0xdbffffff] [ 1.192835] e820: reserve RAM buffer [mem 0xdb8cb000-0xdbffffff] [ 1.192835] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ 1.192836] e820: reserve RAM buffer [mem 0x3df000000-0x3dfffffff] [ 1.193000] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.193186] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 1.196006] clocksource: Switched to clocksource tsc-early [ 1.196006] VFS: Disk quotas dquot_6.6.0 [ 1.196463] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.196757] pnp: PnP ACPI init [ 1.196985] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 1.197197] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.197253] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved [ 1.197469] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.197533] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.197633] system 00:03: [io 0x0a00-0x0a2f] has been reserved [ 1.197835] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 1.198033] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 1.198232] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.198396] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 1.198599] system 00:04: [io 0x040b] has been reserved [ 1.198789] system 00:04: [io 0x04d6] has been reserved [ 1.198980] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 1.199178] system 00:04: [io 0x0c14] has been reserved [ 1.199368] system 00:04: [io 0x0c50-0x0c51] has been reserved [ 1.199566] system 00:04: [io 0x0c52] has been reserved [ 1.199757] system 00:04: [io 0x0c6c] has been reserved [ 1.199948] system 00:04: [io 0x0c6f] has been reserved [ 1.203122] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 1.203240] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 1.203358] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 1.203475] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 1.203593] system 00:04: [io 0x0cd8-0x0cdf] has been reserved [ 1.203711] system 00:04: [io 0x0800-0x089f] has been reserved [ 1.203829] system 00:04: [io 0x0b00-0x0b0f] has been reserved [ 1.203946] system 00:04: [io 0x0b20-0x0b3f] has been reserved [ 1.204061] system 00:04: [io 0x0900-0x090f] has been reserved [ 1.204170] system 00:04: [io 0x0910-0x091f] has been reserved [ 1.204279] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.204394] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved [ 1.204509] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 1.204622] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.204734] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 1.204849] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved [ 1.204962] system 00:04: [mem 0xff000000-0xffffffff] has been reserved [ 1.205076] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.205318] pnp: PnP ACPI: found 5 devices [ 1.211040] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.211248] pci 0000:02:00.0: PCI bridge to [bus 03] [ 1.211356] pci 0000:02:00.0: bridge window [io 0xe000-0xefff] [ 1.211466] pci 0000:02:00.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 1.211581] pci 0000:02:01.0: PCI bridge to [bus 04] [ 1.211691] pci 0000:02:02.0: PCI bridge to [bus 05] [ 1.211800] pci 0000:02:03.0: PCI bridge to [bus 06] [ 1.211903] pci 0000:02:03.0: bridge window [io 0xd000-0xdfff] [ 1.212016] pci 0000:02:03.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 1.212131] pci 0000:02:04.0: PCI bridge to [bus 07] [ 1.212240] pci 0000:02:09.0: PCI bridge to [bus 08] [ 1.212345] pci 0000:02:09.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 1.212460] pci 0000:01:00.2: PCI bridge to [bus 02-08] [ 1.212564] pci 0000:01:00.2: bridge window [io 0xd000-0xefff] [ 1.212673] pci 0000:01:00.2: bridge window [mem 0xfe500000-0xfe7fffff] [ 1.212788] pci 0000:00:01.2: PCI bridge to [bus 01-08] [ 1.212891] pci 0000:00:01.2: bridge window [io 0xd000-0xefff] [ 1.213000] pci 0000:00:01.2: bridge window [mem 0xfe500000-0xfe8fffff] [ 1.213114] pci 0000:00:08.1: PCI bridge to [bus 09] [ 1.213216] pci 0000:00:08.1: bridge window [io 0xf000-0xffff] [ 1.213325] pci 0000:00:08.1: bridge window [mem 0xfe100000-0xfe4fffff] [ 1.213436] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 1.213586] pci 0000:00:08.2: PCI bridge to [bus 0a] [ 1.213690] pci 0000:00:08.2: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.213804] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 1.213805] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 1.213806] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 1.213807] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 1.213807] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 1.213808] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 1.213809] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window] [ 1.213810] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window] [ 1.213811] pci_bus 0000:01: resource 0 [io 0xd000-0xefff] [ 1.213812] pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe8fffff] [ 1.213813] pci_bus 0000:02: resource 0 [io 0xd000-0xefff] [ 1.213813] pci_bus 0000:02: resource 1 [mem 0xfe500000-0xfe7fffff] [ 1.213814] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 1.213815] pci_bus 0000:03: resource 1 [mem 0xfe700000-0xfe7fffff] [ 1.213816] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff] [ 1.213817] pci_bus 0000:06: resource 1 [mem 0xfe600000-0xfe6fffff] [ 1.213818] pci_bus 0000:08: resource 1 [mem 0xfe500000-0xfe5fffff] [ 1.213819] pci_bus 0000:09: resource 0 [io 0xf000-0xffff] [ 1.213819] pci_bus 0000:09: resource 1 [mem 0xfe100000-0xfe4fffff] [ 1.213820] pci_bus 0000:09: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] [ 1.213821] pci_bus 0000:0a: resource 1 [mem 0xfe900000-0xfe9fffff] [ 1.213956] NET: Registered protocol family 2 [ 1.214262] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) [ 1.214427] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.214679] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.214877] TCP: Hash tables configured (established 131072 bind 65536) [ 1.215035] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.215167] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.215364] NET: Registered protocol family 1 [ 1.215706] pci 0000:09:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.216032] PCI: CLS 64 bytes, default 64 [ 1.216061] Trying to unpack rootfs image as initramfs... [ 1.457883] Freeing initrd memory: 22008K [ 1.458092] AMD-Vi: IOMMU performance counters supported [ 1.458348] pci 0000:00:00.2: can't derive routing for PCI INT A [ 1.458552] pci 0000:00:00.2: PCI INT A: not connected [ 1.459483] iommu: Adding device 0000:00:01.0 to group 0 [ 1.460078] iommu: Adding device 0000:00:01.2 to group 1 [ 1.460675] iommu: Adding device 0000:00:08.0 to group 2 [ 1.461233] iommu: Adding device 0000:00:08.1 to group 3 [ 1.461440] iommu: Adding device 0000:00:08.2 to group 2 [ 1.462008] iommu: Adding device 0000:00:14.0 to group 4 [ 1.462212] iommu: Adding device 0000:00:14.3 to group 4 [ 1.462802] iommu: Adding device 0000:00:18.0 to group 5 [ 1.463006] iommu: Adding device 0000:00:18.1 to group 5 [ 1.463209] iommu: Adding device 0000:00:18.2 to group 5 [ 1.463412] iommu: Adding device 0000:00:18.3 to group 5 [ 1.463615] iommu: Adding device 0000:00:18.4 to group 5 [ 1.463819] iommu: Adding device 0000:00:18.5 to group 5 [ 1.464026] iommu: Adding device 0000:00:18.6 to group 5 [ 1.464229] iommu: Adding device 0000:00:18.7 to group 5 [ 1.464820] iommu: Adding device 0000:01:00.0 to group 6 [ 1.465036] iommu: Adding device 0000:01:00.1 to group 6 [ 1.465251] iommu: Adding device 0000:01:00.2 to group 6 [ 1.465457] iommu: Adding device 0000:02:00.0 to group 6 [ 1.465662] iommu: Adding device 0000:02:01.0 to group 6 [ 1.465866] iommu: Adding device 0000:02:02.0 to group 6 [ 1.466070] iommu: Adding device 0000:02:03.0 to group 6 [ 1.466289] iommu: Adding device 0000:02:04.0 to group 6 [ 1.466494] iommu: Adding device 0000:02:09.0 to group 6 [ 1.466703] iommu: Adding device 0000:03:00.0 to group 6 [ 1.466909] iommu: Adding device 0000:03:00.1 to group 6 [ 1.467120] iommu: Adding device 0000:06:00.0 to group 6 [ 1.467332] iommu: Adding device 0000:08:00.0 to group 6 [ 1.467976] iommu: Adding device 0000:09:00.0 to group 7 [ 1.468242] iommu: Using direct mapping for device 0000:09:00.0 [ 1.468513] iommu: Adding device 0000:09:00.1 to group 8 [ 1.468733] iommu: Adding device 0000:09:00.2 to group 8 [ 1.468954] iommu: Adding device 0000:09:00.3 to group 8 [ 1.469175] iommu: Adding device 0000:09:00.4 to group 8 [ 1.469395] iommu: Adding device 0000:09:00.6 to group 8 [ 1.469584] iommu: Adding device 0000:0a:00.0 to group 2 [ 1.469944] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 1.470112] AMD-Vi: Extended features (0x4f77ef22294ada): [ 1.470281] PPR NX GT IA GA PC GA_vAPIC [ 1.470436] AMD-Vi: Interrupt remapping enabled [ 1.470596] AMD-Vi: virtual APIC enabled [ 1.532013] AMD-Vi: Lazy IO/TLB flushing enabled [ 1.532964] amd_uncore: AMD NB counters detected [ 1.533157] amd_uncore: AMD LLC counters detected [ 1.533636] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 1.533870] Scanning for low memory corruption every 60 seconds [ 1.560061] Initialise system trusted keyrings [ 1.560336] workingset: timestamp_bits=62 max_order=22 bucket_order=0 [ 1.720460] NET: Registered protocol family 38 [ 1.720653] Key type asymmetric registered [ 1.720831] Asymmetric key parser 'x509' registered [ 1.721051] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.721321] io scheduler noop registered (default) [ 1.723665] pcieport 0000:00:01.2: AER enabled with IRQ 28 [ 1.723914] Monitor-Mwait will be used to enter C-1 state [ 1.724736] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.747430] 0000:03:00.0: ttyS0 at I/O 0xe010 (irq = 32, base_baud = 115200) is a ST16650V2 [ 1.769994] 0000:03:00.1: ttyS1 at I/O 0xe000 (irq = 25, base_baud = 115200) is a ST16650V2 [ 1.771850] brd: module loaded [ 1.773546] loop: module loaded [ 1.773755] ahci 0000:01:00.1: version 3.0 [ 1.773846] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled [ 1.774126] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 1.774405] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 1.775270] scsi host0: ahci [ 1.775529] scsi host1: ahci [ 1.775755] scsi host2: ahci [ 1.775994] scsi host3: ahci [ 1.776259] scsi host4: ahci [ 1.776531] scsi host5: ahci [ 1.776804] scsi host6: ahci [ 1.777075] scsi host7: ahci [ 1.777263] ata1: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880100 irq 40 [ 1.777533] ata2: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880180 irq 40 [ 1.777801] ata3: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880200 irq 40 [ 1.778071] ata4: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880280 irq 40 [ 1.778340] ata5: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880300 irq 40 [ 1.778609] ata6: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880380 irq 40 [ 1.778877] ata7: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880400 irq 40 [ 1.779147] ata8: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880480 irq 40 [ 1.779636] ahci 0000:0a:00.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.779929] ahci 0000:0a:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs [ 1.783648] ahci 0000:0a:00.0: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented [ 1.784228] scsi host8: ahci [ 1.784478] scsi host9: ahci [ 1.784662] ata9: SATA max UDMA/133 abar m2048@0xfe900000 port 0xfe900100 irq 42 [ 1.784927] ata10: SATA max UDMA/133 abar m2048@0xfe900000 port 0xfe900180 irq 43 [ 1.785212] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.785449] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.018261] igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.018477] igb 0000:06:00.0: eth0: (PCIe:2.5Gb/s:Width x1) e0:d5:5e:a3:6b:35 [ 2.018691] igb 0000:06:00.0: eth0: PBA No: FFFFFF-0FF [ 2.018883] igb 0000:06:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 2.019196] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.019416] ehci-pci: EHCI PCI platform driver [ 2.019606] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.019808] ohci-pci: OHCI PCI platform driver [ 2.020055] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 2.020255] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 2.073508] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000410 [ 2.074450] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.074666] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.074928] usb usb1: Product: xHCI Host Controller [ 2.075113] usb usb1: Manufacturer: Linux 4.16.11 xhci-hcd [ 2.075305] usb usb1: SerialNumber: 0000:01:00.0 [ 2.075575] hub 1-0:1.0: USB hub found [ 2.075766] hub 1-0:1.0: 14 ports detected [ 2.076195] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 2.076391] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 2.076655] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.076897] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.077193] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.077402] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.077663] usb usb2: Product: xHCI Host Controller [ 2.077848] usb usb2: Manufacturer: Linux 4.16.11 xhci-hcd [ 2.078041] usb usb2: SerialNumber: 0000:01:00.0 [ 2.078280] hub 2-0:1.0: USB hub found [ 2.078464] hub 2-0:1.0: 8 ports detected [ 2.078685] usb: port power management may be unreliable [ 2.079039] xhci_hcd 0000:08:00.0: xHCI Host Controller [ 2.079236] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3 [ 2.099193] ata9: SATA link down (SStatus 0 SControl 300) [ 2.099464] ata10: SATA link down (SStatus 0 SControl 300) [ 2.138422] xhci_hcd 0000:08:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010 [ 2.139840] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.140060] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.140320] usb usb3: Product: xHCI Host Controller [ 2.140506] usb usb3: Manufacturer: Linux 4.16.11 xhci-hcd [ 2.140699] usb usb3: SerialNumber: 0000:08:00.0 [ 2.140941] hub 3-0:1.0: USB hub found [ 2.141124] hub 3-0:1.0: 2 ports detected [ 2.141355] xhci_hcd 0000:08:00.0: xHCI Host Controller [ 2.141557] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 4 [ 2.141821] xhci_hcd 0000:08:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.142052] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.142342] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.142549] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.142811] usb usb4: Product: xHCI Host Controller [ 2.142997] usb usb4: Manufacturer: Linux 4.16.11 xhci-hcd [ 2.143189] usb usb4: SerialNumber: 0000:08:00.0 [ 2.143421] hub 4-0:1.0: USB hub found [ 2.143607] hub 4-0:1.0: 2 ports detected [ 2.143890] xhci_hcd 0000:09:00.3: xHCI Host Controller [ 2.144087] xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus number 5 [ 2.144552] xhci_hcd 0000:09:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x40000410 [ 2.145626] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.145838] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.146100] usb usb5: Product: xHCI Host Controller [ 2.146286] usb usb5: Manufacturer: Linux 4.16.11 xhci-hcd [ 2.146479] usb usb5: SerialNumber: 0000:09:00.3 [ 2.146716] hub 5-0:1.0: USB hub found [ 2.146901] hub 5-0:1.0: 4 ports detected [ 2.147320] xhci_hcd 0000:09:00.3: xHCI Host Controller [ 2.147520] xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus number 6 [ 2.147784] xhci_hcd 0000:09:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 2.148024] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.148313] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.148519] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.148782] usb usb6: Product: xHCI Host Controller [ 2.148967] usb usb6: Manufacturer: Linux 4.16.11 xhci-hcd [ 2.149159] usb usb6: SerialNumber: 0000:09:00.3 [ 2.149408] hub 6-0:1.0: USB hub found [ 2.149593] hub 6-0:1.0: 4 ports detected [ 2.150089] xhci_hcd 0000:09:00.4: xHCI Host Controller [ 2.150280] xhci_hcd 0000:09:00.4: new USB bus registered, assigned bus number 7 [ 2.150712] xhci_hcd 0000:09:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x40000410 [ 2.151746] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.151962] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.152230] usb usb7: Product: xHCI Host Controller [ 2.152415] usb usb7: Manufacturer: Linux 4.16.11 xhci-hcd [ 2.152607] usb usb7: SerialNumber: 0000:09:00.4 [ 2.152859] hub 7-0:1.0: USB hub found [ 2.153039] hub 7-0:1.0: 1 port detected [ 2.153255] xhci_hcd 0000:09:00.4: xHCI Host Controller [ 2.153445] xhci_hcd 0000:09:00.4: new USB bus registered, assigned bus number 8 [ 2.153634] xhci_hcd 0000:09:00.4: Host supports USB 3.1 Enhanced SuperSpeed [ 2.153780] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.153957] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.154081] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.154241] usb usb8: Product: xHCI Host Controller [ 2.154354] usb usb8: Manufacturer: Linux 4.16.11 xhci-hcd [ 2.154470] usb usb8: SerialNumber: 0000:09:00.4 [ 2.154636] hub 8-0:1.0: USB hub found [ 2.154751] hub 8-0:1.0: 1 port detected [ 2.154916] i8042: PNP: No PS/2 controller found. [ 2.155053] mousedev: PS/2 mouse device common for all mice [ 2.155223] input: PC Speaker as /devices/platform/pcspkr/input/input0 [ 2.155366] rtc_cmos 00:02: RTC can wake from S4 [ 2.155557] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.155741] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.155914] pps_ldisc: PPS line discipline registered [ 2.156109] device-mapper: uevent: version 1.0.3 [ 2.156257] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 2.156646] NET: Registered protocol family 10 [ 2.157035] Segment Routing with IPv6 [ 2.157153] NET: Registered protocol family 17 [ 2.157279] Key type dns_resolver registered [ 2.158206] microcode: CPU0: patch_level=0x08101007 [ 2.158319] microcode: CPU1: patch_level=0x08101007 [ 2.158433] microcode: CPU2: patch_level=0x08101007 [ 2.158543] microcode: CPU3: patch_level=0x08101007 [ 2.158650] microcode: CPU4: patch_level=0x08101007 [ 2.158757] microcode: CPU5: patch_level=0x08101007 [ 2.158878] microcode: CPU6: patch_level=0x08101007 [ 2.158990] microcode: CPU7: patch_level=0x08101007 [ 2.159115] microcode: Microcode Update Driver: v2.2. [ 2.159132] sched_clock: Marking stable (2159112616, 0)->(2242408195, -83295579) [ 2.162302] registered taskstats version 1 [ 2.162404] Loading compiled-in X.509 certificates [ 2.162972] rtc_cmos 00:02: setting system clock to 2018-05-25 16:27:09 UTC (1527265629) [ 2.256045] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.257388] ata1.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 2.257603] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.259086] ata1.00: configured for UDMA/133 [ 2.259367] scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 2.259830] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.260100] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.260294] sd 0:0:0:0: [sda] Write Protect is off [ 2.260478] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.260491] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.267555] sda: sda1 sda2 sda4 [ 2.267893] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.416013] usb 1-4: new high-speed USB device number 2 using xhci_hcd [ 2.556017] tsc: Refined TSC clocksource calibration: 3600.032 MHz [ 2.556225] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e471e1c72, max_idle_ns: 440795309359 ns [ 2.556568] clocksource: Switched to clocksource tsc [ 2.736070] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.737437] ata2.00: ATA-8: ST2000DM001-1CH164, CC26, max UDMA/133 [ 2.737646] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.738800] ata2.00: configured for UDMA/133 [ 2.739152] scsi 1:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC26 PQ: 0 ANSI: 5 [ 2.739626] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.739897] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.740115] sd 1:0:0:0: [sdb] Write Protect is off [ 2.740304] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.740322] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.755733] sdb: sdb1 sdb2 sdb4 [ 2.756218] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.823813] usb 1-4: New USB device found, idVendor=046d, idProduct=082c [ 2.824061] usb 1-4: New USB device strings: Mfr=0, Product=2, SerialNumber=1 [ 2.824289] usb 1-4: Product: HD Webcam C615 [ 2.824480] usb 1-4: SerialNumber: F6629A60 [ 2.956338] usb 1-9: new low-speed USB device number 3 using xhci_hcd [ 3.216067] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.217694] ata3.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 3.217906] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.219766] ata3.00: configured for UDMA/133 [ 3.220086] scsi 2:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 3.220558] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.220634] usb 1-9: New USB device found, idVendor=046d, idProduct=c312 [ 3.220855] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 3.221064] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.221267] sd 2:0:0:0: [sdc] Write Protect is off [ 3.221469] usb 1-9: Product: USB Multimedia Keyboard [ 3.221654] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.221666] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.221843] usb 1-9: Manufacturer: LITEON Technology [ 3.225785] sdc: sdc1 sdc2 sdc4 [ 3.226173] sd 2:0:0:0: [sdc] Attached SCSI disk [ 3.352046] usb 1-10: new low-speed USB device number 4 using xhci_hcd [ 3.608457] usb 1-10: New USB device found, idVendor=046d, idProduct=c018 [ 3.608687] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.608966] usb 1-10: Product: USB Optical Mouse [ 3.609160] usb 1-10: Manufacturer: Logitech [ 3.696384] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.700485] ata4.00: ATA-10: WDC WD2003FZEX-00SRLA0, 01.01A01, max UDMA/133 [ 3.700704] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.707625] ata4.00: configured for UDMA/133 [ 3.707948] scsi 3:0:0:0: Direct-Access ATA WDC WD2003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 3.708428] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.708718] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 3.708915] sd 3:0:0:0: [sdd] Write Protect is off [ 3.709103] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.709111] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.714178] sdd: sdd1 sdd2 sdd4 [ 3.714546] sd 3:0:0:0: [sdd] Attached SCSI disk [ 3.740066] usb 1-13: new full-speed USB device number 5 using xhci_hcd [ 4.022445] ata5: SATA link down (SStatus 0 SControl 330) [ 4.080705] usb 1-13: New USB device found, idVendor=04d8, idProduct=f5fe [ 4.080942] usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.081221] usb 1-13: Product: TrueRNG [ 4.081404] usb 1-13: Manufacturer: ubld.it [ 4.500379] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.503436] ata6.00: ATAPI: PLEXTOR DVDR PX-891SA, 1.04, max UDMA/100 [ 4.504711] ata6.00: configured for UDMA/100 [ 4.506993] scsi 5:0:0:0: CD-ROM PLEXTOR DVDR PX-891SA 1.04 PQ: 0 ANSI: 5 [ 5.576399] ata7: failed to resume link (SControl 0) [ 5.576625] ata7: SATA link down (SStatus 0 SControl 0) [ 5.892240] ata8: SATA link down (SStatus 0 SControl 330) [ 6.068909] Freeing unused kernel memory: 944K [ 6.069100] Write protecting the kernel read-only data: 16384k [ 6.070634] Freeing unused kernel memory: 2020K [ 6.073158] Freeing unused kernel memory: 1796K [ 6.130111] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 6.130554] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 6.133947] random: systemd: uninitialized urandom read (16 bytes read) [ 6.134837] random: systemd: uninitialized urandom read (16 bytes read) [ 6.135705] random: systemd: uninitialized urandom read (16 bytes read) [ 6.148103] i2c /dev entries driver [ 6.365667] usbcore: registered new interface driver usbhid [ 6.365877] usbhid: USB HID core driver [ 6.366646] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-9/1-9:1.0/0003:046D:C312.0001/input/input1 [ 6.404859] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.405028] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 6.405255] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 6.424047] hid-generic 0003:046D:C312.0001: input: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:01:00.0-9/input0 [ 6.424377] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-10/1-10:1.0/0003:046D:C018.0002/input/input2 [ 6.424612] hid-generic 0003:046D:C018.0002: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:01:00.0-10/input0 [ 6.457517] random: fast init done [ 6.507566] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.572259] md/raid1:md0: active with 4 out of 4 mirrors [ 6.572472] md0: detected capacity change from 0 to 536805376 [ 6.578345] md: kicking non-fresh sdb2 from array! [ 6.596847] md/raid10:md1: active with 3 out of 4 devices [ 6.597081] md1: detected capacity change from 0 to 3997621551104 [ 7.360976] random: crng init done [ 7.361183] random: 7 urandom warning(s) missed due to ratelimiting [ 9.460663] igb 0000:06:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 9.461366] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 14.480203] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 15.185335] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 17.249651] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 17.250091] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 18.061811] EXT4-fs (dm-2): re-mounted. Opts: (null) [ 18.147050] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 18.208922] RPC: Registered named UNIX socket transport module. [ 18.209133] RPC: Registered udp transport module. [ 18.209317] RPC: Registered tcp transport module. [ 18.209502] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 18.379668] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 19.126716] acpi_cpufreq: overriding BIOS provided _PSD data [ 19.141085] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 19.141380] ACPI: Power Button [PWRB] [ 19.142603] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 19.142930] ACPI: Power Button [PWRF] [ 19.159688] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 19.159985] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 19.381697] [drm] amdgpu kernel modesetting enabled. [ 19.383787] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1458:0xD000 0xC6). [ 19.384111] [drm] register mmio base: 0xFE400000 [ 19.384300] [drm] register mmio size: 524288 [ 19.412212] kvm: disabled by bios [ 19.469942] EDAC amd64: Node 0: DRAM ECC disabled. [ 19.470137] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 19.512454] EDAC amd64: Node 0: DRAM ECC disabled. [ 19.512676] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 19.552634] EDAC amd64: Node 0: DRAM ECC disabled. [ 19.552865] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 19.595197] [drm] probing gen 2 caps for device 1022:15db = 700d03/e [ 19.595419] [drm] probing mlw for device 1022:15db = 700d03 [ 19.595840] [drm] VCN decode is enabled in VM mode [ 19.596073] [drm] VCN encode is enabled in VM mode [ 19.600367] EDAC amd64: Node 0: DRAM ECC disabled. [ 19.600557] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 19.619768] [drm] BIOS signature incorrect 20 7 [ 19.619898] ATOM BIOS: 113-RAVEN-104 [ 19.620045] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 19.620206] amdgpu 0000:09:00.0: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used) [ 19.620361] amdgpu 0000:09:00.0: GTT: 1024M 0x000000F500000000 - 0x000000F53FFFFFFF [ 19.620512] [drm] Detected VRAM RAM=1024M, BAR=256M [ 19.620613] [drm] RAM width 128bits UNKNOWN [ 19.620769] [TTM] Zone kernel: Available graphics memory: 7704902 kiB [ 19.620884] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 19.620994] [TTM] Initializing pool allocator [ 19.621094] [TTM] Initializing DMA pool allocator [ 19.621206] [drm] amdgpu: 1024M of VRAM memory ready [ 19.621309] [drm] amdgpu: 3072M of GTT memory ready. [ 19.621415] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 19.621691] [drm] PCIE GART of 1024M enabled (table at 0x000000F400800000). [ 19.644555] EDAC amd64: Node 0: DRAM ECC disabled. [ 19.644670] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 19.704723] cdc_acm 1-13:1.0: ttyACM0: USB ACM device [ 19.706461] usbcore: registered new interface driver cdc_acm [ 19.706678] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 19.736442] [drm] use_doorbell being set to: [true] [ 19.755150] [drm] Found VCN firmware Version: 1.73 Family ID: 18 [ 19.896922] Linux video capture interface: v2.00 [ 19.912810] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:1! type 0 expected 3 [ 19.913011] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3 [ 19.913210] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:3! type 0 expected 3 [ 19.927157] [drm] Display Core initialized with v3.1.27! [ 19.952151] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 19.952244] [drm] Driver supports precise vblank timestamp query. [ 19.975083] [drm] VCN decode and encode initialized successfully. [ 19.990449] [drm] fb mappable at 0xE1000000 [ 19.990552] [drm] vram apper at 0xE0000000 [ 19.990646] [drm] size 33177600 [ 19.990733] [drm] fb depth is 24 [ 19.990821] [drm] pitch is 15360 [ 19.990976] fbcon: amdgpudrmfb (fb0) is primary device [ 20.049029] usbcore: registered new interface driver snd-usb-audio [ 20.058189] uvcvideo: Found UVC 1.00 device HD Webcam C615 (046d:082c) [ 20.081024] input: HD Webcam C615 as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-4/1-4:1.2/input/input5 [ 20.081143] usbcore: registered new interface driver uvcvideo [ 20.081144] USB Video Class driver (1.1.1) [ 20.098237] Console: switching to colour frame buffer device 480x135 [ 20.133549] amdgpu 0000:09:00.0: fb0: amdgpudrmfb frame buffer device [ 20.160117] amdgpu 0000:09:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0 [ 20.160121] amdgpu 0000:09:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0 [ 20.160123] amdgpu 0000:09:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0 [ 20.160126] amdgpu 0000:09:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0 [ 20.160129] amdgpu 0000:09:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0 [ 20.160131] amdgpu 0000:09:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0 [ 20.160134] amdgpu 0000:09:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0 [ 20.160136] amdgpu 0000:09:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0 [ 20.160138] amdgpu 0000:09:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0 [ 20.160151] amdgpu 0000:09:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0 [ 20.160154] amdgpu 0000:09:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1 [ 20.160156] amdgpu 0000:09:00.0: ring 11(vcn_dec) uses VM inv eng 5 on hub 1 [ 20.160171] amdgpu 0000:09:00.0: ring 12(vcn_enc0) uses VM inv eng 6 on hub 1 [ 20.160173] amdgpu 0000:09:00.0: ring 13(vcn_enc1) uses VM inv eng 7 on hub 1 [ 20.163608] [drm] Initialized amdgpu 3.23.0 20150101 for 0000:09:00.0 on minor 0 [ 20.248200] snd_hda_codec_generic hdaudioC0D0: ignore pin 0x7, too many assigned pins [ 20.248284] snd_hda_codec_generic hdaudioC0D0: ignore pin 0x9, too many assigned pins [ 20.248370] snd_hda_codec_generic hdaudioC0D0: ignore pin 0xb, too many assigned pins [ 20.248442] snd_hda_codec_generic hdaudioC0D0: ignore pin 0xd, too many assigned pins [ 20.248496] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line [ 20.248582] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 20.248635] snd_hda_codec_generic hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 20.248684] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0 [ 20.248726] snd_hda_codec_generic hdaudioC0D0: dig-out=0x3/0x5 [ 20.248772] snd_hda_codec_generic hdaudioC0D0: inputs: [ 20.250071] input: HD-Audio Generic HDMI as /devices/pci0000:00/0000:00:08.1/0000:09:00.1/sound/card0/input6 [ 20.250246] input: HD-Audio Generic HDMI as /devices/pci0000:00/0000:00:08.1/0000:09:00.1/sound/card0/input7 [ 20.274400] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 20.274451] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 20.274486] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 20.274520] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 20.274553] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 [ 20.274580] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 20.274611] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 20.274638] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 20.274664] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 20.294763] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input8 [ 20.294856] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input9 [ 20.294932] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input10 [ 20.295005] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input11 [ 20.295084] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input12 [ 20.295162] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input13 [ 20.295242] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input14 [ 34.450427] sysrq: SysRq : Terminate All Tasks [ 34.453261] systemd[1]: lvm2-monitor.service: Main process exited, code=killed, status=15/TERM [ 34.453502] systemd[1]: lvm2-monitor.service: Failed with result 'signal'. [ 34.453831] systemd[1]: Failed to start Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 35.332103] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 37.208309] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) [ 37.292659] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) [ 37.741698] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) [ 37.748516] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 37.880401] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 38.428755] Adding 1023996k swap on /dev/mapper/swapb. Priority:-2 extents:1 across:1023996k [ 38.485328] Adding 1023996k swap on /dev/mapper/swapa. Priority:-3 extents:1 across:1023996k [ 38.532166] Adding 1023996k swap on /dev/mapper/swapc. Priority:-4 extents:1 across:1023996k [ 39.280183] Adding 1023996k swap on /dev/mapper/swapd. Priority:-5 extents:1 across:1023996k [ 51.315447] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 52.027904] pps pps0: new PPS source serial0 [ 52.027910] pps pps0: source "/dev/ttyS0" added [ 52.121563] it87: loading out-of-tree module taints kernel. [ 52.126736] it87: it87 driver version v1.0-41-ge4056da [ 52.131758] it87: Found IT8686E chip at 0xa40, revision 2 [ 52.133954] it87: Beeping is supported [ 52.136882] it87: Found IT8792E/IT8795E chip at 0xa60, revision 3 [ 52.138314] it87: Beeping is supported [ 59.383979] NFSD: starting 90-second grace period (net f0000099) [ 90.718117] fuse init (API version 7.26) [ 99.527948] nemo-desktop[3598]: segfault at 3 ip 00007f8a0c862858 sp 00007ffe2c19e5f8 error 4 in libglib-2.0.so.0.5600.1[7f8a0c81a000+115000] [ 194.718783] md/raid1:md0: Disk failure on sdb1, disabling device. md/raid1:md0: Operation continuing on 3 devices. [ 5671.927134] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 5671.927142] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 29 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 5671.927144] ata6.00: status: { DRDY } [ 5671.927147] ata6: hard resetting link [ 5672.404024] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5672.407318] ata6.00: configured for UDMA/100 [ 5672.418466] ata6: EH complete [ 7187.434671] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 7187.434679] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 23 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [ 7187.434682] ata6.00: status: { DRDY } [ 7187.434685] ata6: hard resetting link [ 7187.910674] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7187.913926] ata6.00: configured for UDMA/100 [ 7187.924865] ata6: EH complete [31321.518107] amdgpu: [powerplay] pp_dpm_get_temperature was not implemented. [31321.518124] amdgpu: [powerplay] pp_dpm_get_temperature was not implemented. [44499.591077] usb 1-7: new full-speed USB device number 6 using xhci_hcd [44499.838258] usb 1-7: New USB device found, idVendor=10c4, idProduct=ea60 [44499.838265] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [44499.838270] usb 1-7: Product: CP2102 USB to UART Bridge Controller [44499.838273] usb 1-7: Manufacturer: Silicon Labs [44499.838276] usb 1-7: SerialNumber: 0001 [44500.079083] usbcore: registered new interface driver usbserial_generic [44500.079106] usbserial: USB Serial support registered for generic [44500.089597] usbcore: registered new interface driver cp210x [44500.089614] usbserial: USB Serial support registered for cp210x [44500.089651] cp210x 1-7:1.0: cp210x converter detected [44500.102316] usb 1-7: cp210x converter now attached to ttyUSB0 [44548.020584] usb 1-7: USB disconnect, device number 6 [44548.020700] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [44548.020724] cp210x 1-7:1.0: device disconnected [67425.870497] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0) [67425.870503] amdgpu 0000:09:00.0: at page 0x000080011ca00000 from 27 [67425.870505] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x003C0071 [67425.870511] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0) [67425.870513] amdgpu 0000:09:00.0: at page 0x000080011ca01000 from 27 [67425.870515] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 [67425.870520] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0) [67425.870522] amdgpu 0000:09:00.0: at page 0x000080011ca04000 from 27 [67425.870524] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 [67425.870530] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0) [67425.870531] amdgpu 0000:09:00.0: at page 0x000080011ca05000 from 27 [67425.870532] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 [67425.870538] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0) [67425.870540] amdgpu 0000:09:00.0: at page 0x000080011ca02000 from 27 [67425.870541] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 [67425.870547] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0) [67425.870548] amdgpu 0000:09:00.0: at page 0x000080011ca03000 from 27 [67425.870550] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 [67425.870555] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0) [67425.870557] amdgpu 0000:09:00.0: at page 0x000080011ca06000 from 27 [67425.870558] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 [67425.870564] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0) [67425.870565] amdgpu 0000:09:00.0: at page 0x000080011ca07000 from 27 [67425.870567] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 [67425.870572] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0) [67425.870574] amdgpu 0000:09:00.0: at page 0x000080011ca08000 from 27 [67425.870575] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 [67425.870581] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0) [67425.870583] amdgpu 0000:09:00.0: at page 0x000080011ca09000 from 27 [67425.870585] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 [67436.085320] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring gfx timeout, last signaled seq=327845, last emitted seq=327847 [67436.085327] [drm] IP block:psp is hung! [67436.085331] [drm] GPU recovery disabled. [67666.740759] INFO: task amdgpu_cs:0:3027 blocked for more than 120 seconds. [67666.740767] Tainted: G O 4.16.11 #9 [67666.740770] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [67666.740774] amdgpu_cs:0 D 0 3027 3024 0x00000000 [67666.740781] Call Trace: [67666.740792] ? __schedule+0x1aa/0x6e0 [67666.740797] schedule+0x2d/0x90 [67666.740802] schedule_timeout+0x1e2/0x2d0 [67666.740809] ? preempt_count_add+0x63/0xa0 [67666.740813] ? _raw_spin_lock+0xe/0x30 [67666.740820] dma_fence_default_wait+0x204/0x230 [67666.740825] ? dma_fence_default_wait+0x230/0x230 [67666.740858] amdgpu_ctx_wait_prev_fence+0x40/0x80 [amdgpu] [67666.740887] amdgpu_cs_ioctl+0x422/0x1980 [amdgpu] [67666.740916] ? amdgpu_cs_find_mapping+0x100/0x100 [amdgpu] [67666.740921] drm_ioctl_kernel+0x6b/0xd0 [67666.740926] drm_ioctl+0x1c4/0x3c0 [67666.740951] ? amdgpu_cs_find_mapping+0x100/0x100 [amdgpu] [67666.740956] ? do_futex+0x2ab/0xaa0 [67666.740960] ? ___cache_free+0x40/0x1f0 [67666.740965] do_vfs_ioctl+0xb0/0x640 [67666.740969] ? SyS_futex+0x14d/0x19d [67666.740973] SyS_ioctl+0x91/0xa0 [67666.740977] do_syscall_64+0x83/0x2f0 [67666.740982] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [67666.740986] RIP: 0033:0x7f79a07d5dc7 [67666.740989] RSP: 002b:00007f7996d2f978 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [67666.740993] RAX: ffffffffffffffda RBX: 00007f7996d2fa68 RCX: 00007f79a07d5dc7 [67666.740996] RDX: 00007f7996d2f9e0 RSI: 00000000c0186444 RDI: 000000000000000e [67666.740999] RBP: 00007f7996d2f9e0 R08: 00007f7996d2fa90 R09: 0000000000000010 [67666.741001] R10: 00007f7996d2fa90 R11: 0000000000000246 R12: 00000000c0186444 [67666.741004] R13: 000000000000000e R14: 000000000000000b R15: 0000000000000000 [67666.741047] INFO: task kworker/u16:2:31826 blocked for more than 120 seconds. [67666.741050] Tainted: G O 4.16.11 #9 [67666.741051] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [67666.741053] kworker/u16:2 D 0 31826 2 0x80000000 [67666.741062] Workqueue: events_unbound commit_work [67666.741065] Call Trace: [67666.741069] ? __schedule+0x1aa/0x6e0 [67666.741072] schedule+0x2d/0x90 [67666.741076] schedule_timeout+0x1e2/0x2d0 [67666.741081] dma_fence_default_wait+0x204/0x230 [67666.741084] ? dma_fence_default_wait+0x230/0x230 [67666.741088] reservation_object_wait_timeout_rcu+0x1dc/0x360 [67666.741129] amdgpu_dm_do_flip+0x108/0x370 [amdgpu] [67666.741171] amdgpu_dm_atomic_commit_tail+0xac7/0xdb0 [amdgpu] [67666.741176] ? wait_for_common+0x125/0x1c0 [67666.741180] commit_tail+0x38/0x70 [67666.741184] process_one_work+0x1a1/0x2f0 [67666.741188] worker_thread+0x26/0x3f0 [67666.741191] ? process_one_work+0x2f0/0x2f0 [67666.741195] kthread+0x109/0x120 [67666.741198] ? kthread_create_on_node+0x60/0x60 [67666.741202] ret_from_fork+0x22/0x40