[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.24 (root@ben-desktop) (gcc version 4.2.3 20080114 (prerelease) (Ubuntu 4.2.2-7ubuntu1)) #1 SMP Mon Jan 28 15:18:55 CET 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf780000 (usable) [ 0.000000] BIOS-e820: 00000000cf780000 - 00000000cf78e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cf78e000 - 00000000cf7e0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cf7e0000 - 00000000cf800000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] Warning only 4GB will be used. [ 0.000000] Use a HIGHMEM64G enabled kernel. [ 0.000000] 3200MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000ff780 [ 0.000000] Entering add_active_range(0, 0, 1048576) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 1048576 [ 0.000000] On node 0 totalpages: 1048576 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 6400 pages used for memmap [ 0.000000] HighMem zone: 812800 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000FBCB0, 0024 (r2 ACPIAM) [ 0.000000] ACPI: XSDT CF780100, 005C (r1 A_M_I_ OEMXSDT 12000717 MSFT 97) [ 0.000000] ACPI: FACP CF780290, 00F4 (r3 A_M_I_ OEMFACP 12000717 MSFT 97) [ 0.000000] ACPI: DSDT CF7805C0, 8D10 (r1 A0867 A0867001 1 INTL 20060113) [ 0.000000] ACPI: FACS CF78E000, 0040 [ 0.000000] ACPI: APIC CF780390, 006C (r1 A_M_I_ OEMAPIC 12000717 MSFT 97) [ 0.000000] ACPI: MCFG CF780400, 003C (r1 A_M_I_ OEMMCFG 12000717 MSFT 97) [ 0.000000] ACPI: OEMB CF78E040, 0081 (r1 A_M_I_ AMI_OEM 12000717 MSFT 97) [ 0.000000] ACPI: HPET CF7892D0, 0038 (r1 A_M_I_ OEMHPET 12000717 MSFT 97) [ 0.000000] ACPI: GSCI CF78E0D0, 2024 (r1 A_M_I_ GMCHSCI 12000717 MSFT 97) [ 0.000000] ACPI: OSFR CF789310, 00B0 (r1 A_M_I_ OEMOSFR 12000717 MSFT 97) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] Processor #2 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] Processor #3 6:15 APIC version 20 [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at d0000000 (gap: cf800000:2f600000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384 [ 0.000000] Kernel command line: root=UUID=4f3d7f14-eeb7-4879-a04e-706a2d64a903 ro drm.debug=1 locale=fr_FR [ 0.000000] Unknown boot option `drm.debug=1': ignoring [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2405.512 MHz processor. [ 41.096952] Console: colour VGA+ 80x25 [ 41.096955] console [tty0] enabled [ 41.100832] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 41.101105] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 41.237858] Memory: 3342616k/4194304k available (2205k kernel code, 55292k reserved, 1068k data, 340k init, 2481664k highmem) [ 41.237935] virtual kernel memory layout: [ 41.237935] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 41.237936] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 41.237937] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 41.237938] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 41.237939] .init : 0xc0439000 - 0xc048e000 ( 340 kB) [ 41.237939] .data : 0xc03277ac - 0xc0432b44 (1068 kB) [ 41.237940] .text : 0xc0100000 - 0xc03277ac (2205 kB) [ 41.238290] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 41.238398] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 [ 41.238565] hpet clockevent registered [ 41.318437] Calibrating delay using timer specific routine.. 4814.17 BogoMIPS (lpj=9628349) [ 41.318535] Security Framework initialized [ 41.318580] SELinux: Disabled at boot. [ 41.318628] Mount-cache hash table entries: 512 [ 41.318757] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000 [ 41.318762] monitor/mwait feature present. [ 41.318805] using mwait in idle threads. [ 41.318848] CPU: L1 I cache: 32K, L1 D cache: 32K [ 41.318908] CPU: L2 cache: 4096K [ 41.318949] CPU: Physical Processor ID: 0 [ 41.318990] CPU: Processor Core ID: 0 [ 41.319031] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000 [ 41.319037] Compat vDSO mapped to ffffe000. [ 41.319086] Checking 'hlt' instruction... OK. [ 41.334735] SMP alternatives: switching to UP code [ 41.335290] ACPI: Core revision 20070126 [ 41.380736] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 41.380828] SMP alternatives: switching to SMP code [ 41.381204] Booting processor 1/1 eip 3000 [ 41.391840] Initializing CPU#1 [ 41.470184] Calibrating delay using timer specific routine.. 4810.90 BogoMIPS (lpj=9621816) [ 41.470188] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000 [ 41.470192] monitor/mwait feature present. [ 41.470193] CPU: L1 I cache: 32K, L1 D cache: 32K [ 41.470195] CPU: L2 cache: 4096K [ 41.470196] CPU: Physical Processor ID: 0 [ 41.470197] CPU: Processor Core ID: 1 [ 41.470198] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000 [ 41.470688] CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 41.471091] SMP alternatives: switching to SMP code [ 41.471657] Booting processor 2/2 eip 3000 [ 41.481949] Initializing CPU#2 [ 41.562031] Calibrating delay using timer specific routine.. 4810.95 BogoMIPS (lpj=9621908) [ 41.562036] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000 [ 41.562039] monitor/mwait feature present. [ 41.562041] CPU: L1 I cache: 32K, L1 D cache: 32K [ 41.562043] CPU: L2 cache: 4096K [ 41.562044] CPU: Physical Processor ID: 0 [ 41.562045] CPU: Processor Core ID: 2 [ 41.562046] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000 [ 41.562529] CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 41.562921] SMP alternatives: switching to SMP code [ 41.563297] Booting processor 3/3 eip 3000 [ 41.573588] Initializing CPU#3 [ 41.653879] Calibrating delay using timer specific routine.. 4810.93 BogoMIPS (lpj=9621879) [ 41.653884] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000 [ 41.653887] monitor/mwait feature present. [ 41.653889] CPU: L1 I cache: 32K, L1 D cache: 32K [ 41.653890] CPU: L2 cache: 4096K [ 41.653892] CPU: Physical Processor ID: 0 [ 41.653893] CPU: Processor Core ID: 3 [ 41.653893] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000 [ 41.654432] CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 41.654830] Total of 4 processors activated (19246.97 BogoMIPS). [ 41.655006] ENABLING IO-APIC IRQs [ 41.655200] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 41.801700] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 41.821761] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 41.841829] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 41.861872] Brought up 4 CPUs [ 41.861943] CPU0 attaching sched-domain: [ 41.861945] domain 0: span 03 [ 41.861946] groups: 01 02 [ 41.861948] domain 1: span 0f [ 41.861949] groups: 03 0c [ 41.861951] CPU1 attaching sched-domain: [ 41.861952] domain 0: span 03 [ 41.861953] groups: 02 01 [ 41.861955] domain 1: span 0f [ 41.861956] groups: 03 0c [ 41.861957] CPU2 attaching sched-domain: [ 41.861959] domain 0: span 0c [ 41.861960] groups: 04 08 [ 41.861961] domain 1: span 0f [ 41.861962] groups: 0c 03 [ 41.861964] CPU3 attaching sched-domain: [ 41.861965] domain 0: span 0c [ 41.861966] groups: 08 04 [ 41.861968] domain 1: span 0f [ 41.861969] groups: 0c 03 [ 41.862186] net_namespace: 64 bytes [ 41.862542] Time: 23:17:33 Date: 01/28/08 [ 41.862599] NET: Registered protocol family 16 [ 41.862751] EISA bus registered [ 41.862793] ACPI: bus type pci registered [ 41.862884] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved [ 41.862931] PCI: Not using MMCONFIG. [ 41.863077] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4 [ 41.863124] PCI: Using configuration type 1 [ 41.863166] Setting up standard PCI resources [ 41.867077] ACPI: EC: Look up EC in DSDT [ 41.873425] ACPI: Interpreter enabled [ 41.873477] ACPI: (supports S0 S1 S3 S4 S5) [ 41.873617] ACPI: Using IOAPIC for interrupt routing [ 41.880350] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 41.881066] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 41.881115] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 41.881648] PCI: Transparent bridge - 0000:00:1e.0 [ 41.881715] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 41.881830] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 41.881926] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 41.881997] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 41.882067] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 41.895881] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 41.896233] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 41.896583] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 41.896933] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 41.897283] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 41.897689] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 41.898039] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 41.898409] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 41.898747] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 7D, should be 7C [20070126] [ 41.898860] Linux Plug and Play Support v0.97 (c) Adam Belay [ 41.898923] pnp: PnP ACPI init [ 41.898966] ACPI: bus type pnp registered [ 41.901451] pnp: PnP ACPI: found 15 devices [ 41.901496] ACPI: ACPI bus type pnp unregistered [ 41.901540] PnPBIOS: Disabled by ACPI PNP [ 41.901687] SCSI subsystem initialized [ 41.901785] libata version 3.00 loaded. [ 41.901914] PCI: Using ACPI for IRQ routing [ 41.901957] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 41.941494] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 41.941639] hpet0: 4 64-bit timers, 14318180 Hz [ 41.945488] Time: tsc clocksource has been installed. [ 41.945544] Switched to high resolution mode on CPU 0 [ 41.945619] Switched to high resolution mode on CPU 1 [ 41.946183] Switched to high resolution mode on CPU 2 [ 41.946281] Switched to high resolution mode on CPU 3 [ 41.953502] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 41.953561] system 00:06: ioport range 0x290-0x297 has been reserved [ 41.953616] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 41.953671] system 00:07: ioport range 0x800-0x87f has been reserved [ 41.954322] system 00:07: ioport range 0x480-0x4bf has been reserved [ 41.954369] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 41.954418] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved [ 41.954467] system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved [ 41.954516] system 00:07: iomem range 0xffa00000-0xffafffff has been reserved [ 41.954564] system 00:07: iomem range 0xffb00000-0xffbfffff has been reserved [ 41.954613] system 00:07: iomem range 0xffe00000-0xffefffff has been reserved [ 41.954662] system 00:07: iomem range 0xfff00000-0xfffffffe could not be reserved [ 41.954729] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved [ 41.954778] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved [ 41.954845] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 41.954896] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 41.954944] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved [ 41.954992] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 41.955041] system 00:0e: iomem range 0x100000-0xcf7fffff could not be reserved [ 41.955104] system 00:0e: iomem range 0x0-0x0 could not be reserved [ 41.985358] PCI: Bridge: 0000:00:1c.0 [ 41.985400] IO window: disabled. [ 41.985442] MEM window: disabled. [ 41.985484] PREFETCH window: fdf00000-fdffffff [ 41.985529] PCI: Bridge: 0000:00:1c.4 [ 41.985571] IO window: d000-dfff [ 41.985613] MEM window: disabled. [ 41.985654] PREFETCH window: disabled. [ 41.985698] PCI: Bridge: 0000:00:1c.5 [ 41.985738] IO window: disabled. [ 41.985780] MEM window: fea00000-feafffff [ 41.985823] PREFETCH window: disabled. [ 41.985867] PCI: Bridge: 0000:00:1e.0 [ 41.985908] IO window: e000-efff [ 41.985951] MEM window: feb00000-febfffff [ 41.985994] PREFETCH window: disabled. [ 41.986051] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 41.986134] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 41.986147] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 16 [ 41.986231] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 41.986244] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 17 [ 41.986327] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 41.986334] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 41.986343] NET: Registered protocol family 2 [ 42.029398] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 42.029626] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 42.029982] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 42.030161] TCP: Hash tables configured (established 131072 bind 65536) [ 42.030209] TCP reno registered [ 42.041456] checking if image is initramfs... it is [ 43.123029] Freeing initrd memory: 17353k freed [ 43.124061] audit: initializing netlink socket (disabled) [ 43.124118] audit(1201562254.692:1): initialized [ 43.124366] highmem bounce pool size: 64 pages [ 43.126470] VFS: Disk quotas dquot_6.5.1 [ 43.126573] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 43.126745] io scheduler noop registered [ 43.126791] io scheduler anticipatory registered [ 43.126838] io scheduler deadline registered [ 43.126893] io scheduler cfq registered (default) [ 43.126946] Boot video device is 0000:00:02.0 [ 43.127158] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 43.127202] assign_interrupt_mode Found MSI capability [ 43.127272] Allocate Port Service[0000:00:1c.0:pcie00] [ 43.127308] Allocate Port Service[0000:00:1c.0:pcie02] [ 43.127388] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 43.127425] assign_interrupt_mode Found MSI capability [ 43.127502] Allocate Port Service[0000:00:1c.4:pcie00] [ 43.127537] Allocate Port Service[0000:00:1c.4:pcie02] [ 43.127618] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 43.127656] assign_interrupt_mode Found MSI capability [ 43.127742] Allocate Port Service[0000:00:1c.5:pcie00] [ 43.127781] Allocate Port Service[0000:00:1c.5:pcie02] [ 43.127956] isapnp: Scanning for PnP cards... [ 43.480250] isapnp: No Plug & Play device found [ 43.502475] Real Time Clock Driver v1.12ac [ 43.502680] hpet_resources: 0xfed00000 is busy [ 43.502714] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 43.502910] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 43.503476] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 43.504340] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 43.504715] loop: module loaded [ 43.504925] nsp32: loading... [ 43.505041] Driver 'sd' needs updating - please use bus_type methods [ 43.505121] Driver 'sr' needs updating - please use bus_type methods [ 43.505236] ahci 0000:00:1f.2: version 3.0 [ 43.505253] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 18 [ 44.505220] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 44.505293] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part [ 44.505370] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 44.505585] scsi0 : ahci [ 44.505710] scsi1 : ahci [ 44.505813] scsi2 : ahci [ 44.505918] scsi3 : ahci [ 44.506031] scsi4 : ahci [ 44.506136] scsi5 : ahci [ 44.506289] ata1: SATA max UDMA/133 abar m2048@0xfe7fa800 port 0xfe7fa900 irq 220 [ 44.506361] ata2: SATA max UDMA/133 abar m2048@0xfe7fa800 port 0xfe7fa980 irq 220 [ 44.506434] ata3: SATA max UDMA/133 abar m2048@0xfe7fa800 port 0xfe7faa00 irq 220 [ 44.506499] ata4: SATA max UDMA/133 abar m2048@0xfe7fa800 port 0xfe7faa80 irq 220 [ 44.506563] ata5: SATA max UDMA/133 abar m2048@0xfe7fa800 port 0xfe7fab00 irq 220 [ 44.506627] ata6: SATA max UDMA/133 abar m2048@0xfe7fa800 port 0xfe7fab80 irq 220 [ 45.144140] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 45.145576] ata1.00: ATA-8: ST3500320AS, SD15, max UDMA/133 [ 45.145627] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 45.147409] ata1.00: configured for UDMA/133 [ 45.783057] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 45.939660] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S203D, SB00, max UDMA/100, ATAPI AN [ 46.095382] ata2.00: configured for UDMA/100 [ 46.414005] ata3: SATA link down (SStatus 0 SControl 300) [ 46.733468] ata4: SATA link down (SStatus 0 SControl 300) [ 47.052932] ata5: SATA link down (SStatus 0 SControl 300) [ 47.372396] ata6: SATA link down (SStatus 0 SControl 300) [ 47.372551] scsi 0:0:0:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5 [ 47.372762] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 47.372826] sd 0:0:0:0: [sda] Write Protect is off [ 47.372871] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 47.372886] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 47.372998] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 47.373053] sd 0:0:0:0: [sda] Write Protect is off [ 47.373096] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 47.373110] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 47.373178] sda: sda1 sda2 sda3 sda4 [ 47.408915] sd 0:0:0:0: [sda] Attached SCSI disk [ 47.409565] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203D SB00 PQ: 0 ANSI: 5 [ 47.414392] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 47.414463] Uniform CD-ROM driver Revision: 3.20 [ 47.414580] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 47.414671] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 47.414780] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 47.414814] scsi6 : pata_jmicron [ 47.414895] scsi7 : pata_jmicron [ 47.415242] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17 [ 47.415291] ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17 [ 47.586104] ata7.00: ATA-7: Maxtor 6L200P0, BAH41E00, max UDMA/133 [ 47.586156] ata7.00: 398297088 sectors, multi 16: LBA48 [ 47.586371] ata7.01: ATA-7: ST3250823A, 3.03, max UDMA/100 [ 47.586420] ata7.01: 488397168 sectors, multi 16: LBA48 [ 47.586476] ata7.00: limited to UDMA/33 due to 40-wire cable [ 47.586526] ata7.01: limited to UDMA/33 due to 40-wire cable [ 47.602108] ata7.00: configured for UDMA/33 [ 47.616619] ata7.01: configured for UDMA/33 [ 47.771870] scsi 6:0:0:0: Direct-Access ATA Maxtor 6L200P0 BAH4 PQ: 0 ANSI: 5 [ 47.772017] sd 6:0:0:0: [sdb] 398297088 512-byte hardware sectors (203928 MB) [ 47.772074] sd 6:0:0:0: [sdb] Write Protect is off [ 47.772118] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 47.772132] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 47.772226] sd 6:0:0:0: [sdb] 398297088 512-byte hardware sectors (203928 MB) [ 47.772281] sd 6:0:0:0: [sdb] Write Protect is off [ 47.772325] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 47.772340] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 47.772408] sdb: sdb1 sdb2 sdb3 sdb4 [ 47.792203] sd 6:0:0:0: [sdb] Attached SCSI disk [ 47.792321] scsi 6:0:1:0: Direct-Access ATA ST3250823A 3.03 PQ: 0 ANSI: 5 [ 47.792453] sd 6:0:1:0: [sdc] 488397168 512-byte hardware sectors (250059 MB) [ 47.792509] sd 6:0:1:0: [sdc] Write Protect is off [ 47.792552] sd 6:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 47.792566] sd 6:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 47.792661] sd 6:0:1:0: [sdc] 488397168 512-byte hardware sectors (250059 MB) [ 47.792716] sd 6:0:1:0: [sdc] Write Protect is off [ 47.792760] sd 6:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 47.792773] sd 6:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 47.792841] sdc: sdc1 [ 47.813057] sd 6:0:1:0: [sdc] Attached SCSI disk [ 47.813207] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 47.815949] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 47.815994] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 47.816102] mice: PS/2 mouse device common for all mice [ 47.816219] EISA: Probing bus 0 at eisa.0 [ 47.816283] EISA: Detected 0 cards. [ 47.816324] cpuidle: using governor ladder [ 47.816365] cpuidle: using governor menu [ 47.816450] TCP cubic registered [ 47.816495] NET: Registered protocol family 1 [ 47.816547] Starting balanced_irq [ 47.816595] Using IPI No-Shortcut mode [ 47.816744] Magic number: 8:234:303 [ 47.817430] hash matches device tty32 [ 47.817592] Freeing unused kernel memory: 340k freed [ 47.839962] input: AT Translated Set 2 keyboard as /class/input/input0 [ 47.942135] fuse init (API version 7.9) [ 47.949587] ACPI: SSDT CF790100, 01D2 (r1 AMI CPU1PM 1 INTL 20060113) [ 47.950162] ACPI: SSDT CF7902E0, 0143 (r1 AMI CPU2PM 1 INTL 20060113) [ 47.950728] ACPI: SSDT CF790430, 0143 (r1 AMI CPU3PM 1 INTL 20060113) [ 47.951310] ACPI: SSDT CF790580, 0143 (r1 AMI CPU4PM 1 INTL 20060113) [ 48.138838] Attempting manual resume [ 48.138881] swsusp: Resume From Partition 8:2 [ 48.138882] PM: Checking swsusp image. [ 48.139252] PM: Resume from disk failed. [ 48.174030] kjournald starting. Commit interval 5 seconds [ 48.174034] EXT3-fs: mounted filesystem with ordered data mode. [ 52.181832] Linux agpgart interface v0.102 [ 52.195057] agpgart: Detected an Intel 965G Chipset. [ 52.196685] agpgart: Detected 7676K stolen memory. [ 52.207851] agpgart: AGP aperture is 256M @ 0xd0000000 [ 52.247806] input: Power Button (FF) as /class/input/input1 [ 52.309644] ACPI: Power Button (FF) [PWRF] [ 52.309750] input: Power Button (CM) as /class/input/input2 [ 52.347656] usbcore: registered new interface driver usbfs [ 52.347733] usbcore: registered new interface driver hub [ 52.347848] usbcore: registered new device driver usb [ 52.369573] ACPI: Power Button (CM) [PWRB] [ 52.392008] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 19 [ 52.392114] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 52.392117] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 52.392500] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 52.396485] ehci_hcd 0000:00:1a.7: debug port 1 [ 52.396532] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 52.396539] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfe7fbc00 [ 52.411947] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 52.412152] usb usb1: configuration #1 chosen from 1 choice [ 52.412224] hub 1-0:1.0: USB hub found [ 52.412276] hub 1-0:1.0: 6 ports detected [ 52.420656] input: PC Speaker as /class/input/input3 [ 52.445356] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 52.445434] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 52.445503] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 52.445573] sd 6:0:1:0: Attached scsi generic sg3 type 0 [ 52.483314] USB Universal Host Controller Interface driver v3.0 [ 52.515837] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 [ 52.515933] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 52.515936] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 52.516000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 52.519971] ehci_hcd 0000:00:1d.7: debug port 1 [ 52.520017] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 52.520024] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfe7fb800 [ 52.535740] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 52.535938] usb usb2: configuration #1 chosen from 1 choice [ 52.536005] hub 2-0:1.0: USB hub found [ 52.536050] hub 2-0:1.0: 6 ports detected [ 52.536189] iTCO_vendor_support: vendor-support=0 [ 52.548696] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 52.548810] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860) [ 52.548884] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 52.635694] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 52.635796] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 52.635799] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 52.635861] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 52.635944] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000c480 [ 52.636075] usb usb3: configuration #1 chosen from 1 choice [ 52.636152] hub 3-0:1.0: USB hub found [ 52.636196] hub 3-0:1.0: 2 ports detected [ 52.739530] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 52.739634] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 52.739636] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 52.739698] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 52.739784] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800 [ 52.739908] usb usb4: configuration #1 chosen from 1 choice [ 52.739969] hub 4-0:1.0: USB hub found [ 52.740012] hub 4-0:1.0: 2 ports detected [ 52.755871] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 52.843818] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 52.843909] PCI: Setting latency timer of device 0000:00:1a.2 to 64 [ 52.843911] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 52.843972] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 52.844054] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c880 [ 52.844177] usb usb5: configuration #1 chosen from 1 choice [ 52.844250] hub 5-0:1.0: USB hub found [ 52.844293] hub 5-0:1.0: 2 ports detected [ 52.885785] usb 1-2: configuration #1 chosen from 1 choice [ 52.947180] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 52.947276] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 52.947279] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 52.947350] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 52.947432] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000c000 [ 52.947557] usb usb6: configuration #1 chosen from 1 choice [ 52.947618] hub 6-0:1.0: USB hub found [ 52.947664] hub 6-0:1.0: 2 ports detected [ 53.050975] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 22 [ 53.051075] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 53.051077] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 53.051139] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 53.051224] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000c080 [ 53.051350] usb usb7: configuration #1 chosen from 1 choice [ 53.051416] hub 7-0:1.0: USB hub found [ 53.051460] hub 7-0:1.0: 2 ports detected [ 53.154792] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 53.154891] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 53.154894] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 53.154953] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 53.155039] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000c400 [ 53.155155] usb usb8: configuration #1 chosen from 1 choice [ 53.155223] hub 8-0:1.0: USB hub found [ 53.155267] hub 8-0:1.0: 2 ports detected [ 53.258679] ACPI: PCI Interrupt 0000:04:03.0[A] -> <6>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 18 [ 53.258718] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 53.258807] GSI 16 (level, low) -> IRQ 17 [ 53.311483] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 53.347445] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 53.347507] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 53.442708] usb 5-2: new low speed USB device using uhci_hcd and address 2 [ 53.470699] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 53.622936] usb 5-2: configuration #1 chosen from 1 choice [ 53.650447] usbcore: registered new interface driver hiddev [ 53.686460] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 53.686581] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 53.686591] atl1 0000:01:00.0: version 2.0.7 [ 53.701091] input: Microsoft Microsoft Wireless Optical Mouse® 1.00 as /class/input/input4 [ 53.745718] input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.00] on usb-0000:00:1a.2-2 [ 53.745849] usbcore: registered new interface driver usbhid [ 53.745896] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 53.858223] usbcore: registered new interface driver libusual [ 54.043492] Initializing USB Mass Storage driver... [ 54.049201] scsi8 : SCSI emulation for USB Mass Storage devices [ 54.049303] usbcore: registered new interface driver usb-storage [ 54.049353] USB Mass Storage support registered. [ 54.049399] usb-storage: device found at 2 [ 54.049400] usb-storage: waiting for device to settle before scanning [ 54.247258] NET: Registered protocol family 10 [ 54.247459] lo: Disabled Privacy Extensions [ 54.247716] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 54.277481] w83627ehf: Found W83627DHG chip at 0x290 [ 54.297129] coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong! [ 54.297230] coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong! [ 54.297334] coretemp coretemp.2: Using undocumented features, absolute temperature might be wrong! [ 54.297428] coretemp coretemp.3: Using undocumented features, absolute temperature might be wrong! [ 54.358363] Adding 5863716k swap on /dev/sda2. Priority:-1 extents:1 across:5863716k [ 54.584548] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800018eae9f] [ 54.653833] EXT3 FS on sda3, internal journal [ 54.790059] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 55.347010] kjournald starting. Commit interval 5 seconds [ 55.347515] EXT3 FS on sda4, internal journal [ 55.347519] EXT3-fs: mounted filesystem with ordered data mode. [ 55.460401] atl1 0000:01:00.0: eth0 link is up 100 Mbps full duplex [ 55.461373] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 56.101450] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 56.132826] No dock devices found. [ 58.799902] Bluetooth: Core ver 2.11 [ 58.799967] NET: Registered protocol family 31 [ 58.799969] Bluetooth: HCI device and connection manager initialized [ 58.799973] Bluetooth: HCI socket layer initialized [ 58.810929] Bluetooth: L2CAP ver 2.9 [ 58.810933] Bluetooth: L2CAP socket layer initialized [ 58.848309] Bluetooth: RFCOMM socket layer initialized [ 58.848324] Bluetooth: RFCOMM TTY layer initialized [ 58.848326] Bluetooth: RFCOMM ver 1.8 [ 59.036980] usb-storage: device scan complete [ 59.040730] scsi 8:0:0:0: Direct-Access ST910082 4A 0000 PQ: 0 ANSI: 0 [ 59.041958] sd 8:0:0:0: [sdd] 195371568 512-byte hardware sectors (100030 MB) [ 59.042831] sd 8:0:0:0: [sdd] Write Protect is off [ 59.042834] sd 8:0:0:0: [sdd] Mode Sense: 27 00 00 00 [ 59.042836] sd 8:0:0:0: [sdd] Assuming drive cache: write through [ 59.043829] sd 8:0:0:0: [sdd] 195371568 512-byte hardware sectors (100030 MB) [ 59.044702] sd 8:0:0:0: [sdd] Write Protect is off [ 59.044706] sd 8:0:0:0: [sdd] Mode Sense: 27 00 00 00 [ 59.044708] sd 8:0:0:0: [sdd] Assuming drive cache: write through [ 59.044760] sdd: sdd1 [ 59.395830] sd 8:0:0:0: [sdd] Attached SCSI disk [ 59.395879] sd 8:0:0:0: Attached scsi generic sg4 type 0 [ 61.096709] [drm] Initialized drm 1.1.0 20060810 [ 61.126134] [drm:drm_init] [ 61.126171] [drm:drm_get_dev] [ 61.126192] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 61.126198] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 61.126223] [drm:drm_addmap_core] offset = 0xfe800000, size = 0x00100000, type = 1 [ 61.126233] [drm:drm_get_head] [ 61.126265] [drm:drm_get_head] new minor assigned 0 [ 61.126267] [drm] Initialized i915 1.12.0 20070209 on minor 0 [ 61.126467] [drm:drm_stub_open] [ 61.126470] [drm:drm_open_helper] pid = 5553, minor = 0 [ 61.126476] [drm:drm_addmap_core] offset = 0x00000000, size = 0x00002000, type = 2 [ 61.126485] [drm:drm_addmap_core] 8192 13 f8f19000 [ 61.126488] [drm:drm_setup] [ 61.126524] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1 [ 61.126532] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0086401, nr=0x01, dev 0xe200, auth=1 [ 61.126538] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0086401, nr=0x01, dev 0xe200, auth=1 [ 61.126558] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1 [ 61.126577] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0186415, nr=0x15, dev 0xe200, auth=1 [ 61.126581] [drm:drm_addmap_core] offset = 0x00000000, size = 0x00002000, type = 2 [ 61.126592] [drm:drm_mmap_locked] start = 0xb7ad6000, end = 0xb7ad8000, page offset = 0xf8f19 [ 61.126595] [drm:drm_vm_open_locked] 0xb7ad6000,0x00002000 [ 61.126602] [drm:drm_do_vm_shm_nopage] 0xb7ad6000 [ 61.126607] [drm:drm_do_vm_shm_nopage] 0xb7ad7000 [ 61.126655] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0086426, nr=0x26, dev 0xe200, auth=1 [ 61.126661] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0086426, nr=0x26, dev 0xe200, auth=1 [ 61.127205] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0086420, nr=0x20, dev 0xe200, auth=1 [ 61.127211] [drm:drm_addctx] 1 [ 61.127219] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x40086422, nr=0x22, dev 0xe200, auth=1 [ 61.127236] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4008642a, nr=0x2a, dev 0xe200, auth=1 [ 61.127239] [drm:drm_lock] 1 (pid 5553) requests lock (0x00000000), flags = 0x00000000 [ 61.127242] [drm:drm_lock] 1 has lock [ 61.127261] [drm:drm_fasync] fd = 8, device = 0xe200 [ 61.127295] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0246400, nr=0x00, dev 0xe200, auth=1 [ 61.127300] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0246400, nr=0x00, dev 0xe200, auth=1 [ 61.137802] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0186415, nr=0x15, dev 0xe200, auth=1 [ 61.137811] [drm:drm_addmap_core] offset = 0xfe800000, size = 0x00080000, type = 1 [ 61.137815] [drm:drm_addmap_core] Matching maps of type 1 with mismatched sizes, (524288 vs 1048576) [ 61.137830] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0186415, nr=0x15, dev 0xe200, auth=1 [ 61.137833] [drm:drm_addmap_core] offset = 0xd0000000, size = 0x00020000, type = 3 [ 61.137836] [drm:drm_addmap_core] AGP offset = 0xd0000000, size = 0x00020000 [ 61.137854] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x40446440, nr=0x40, dev 0xe200, auth=1 [ 61.137872] [drm:i915_initialize] Enabled hardware status page [ 61.137880] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0186415, nr=0x15, dev 0xe200, auth=1 [ 61.137884] [drm:drm_addmap_core] offset = 0xd0100000, size = 0x00640000, type = 3 [ 61.137886] [drm:drm_addmap_core] AGP offset = 0xd0100000, size = 0x00640000 [ 61.137900] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0186415, nr=0x15, dev 0xe200, auth=1 [ 61.137904] [drm:drm_addmap_core] offset = 0xd1a00000, size = 0x00640000, type = 3 [ 61.137906] [drm:drm_addmap_core] AGP offset = 0xd1a00000, size = 0x00640000 [ 61.137918] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0186415, nr=0x15, dev 0xe200, auth=1 [ 61.137922] [drm:drm_addmap_core] offset = 0xd2040000, size = 0x00640000, type = 3 [ 61.137924] [drm:drm_addmap_core] AGP offset = 0xd2040000, size = 0x00640000 [ 61.137935] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0186415, nr=0x15, dev 0xe200, auth=1 [ 61.137939] [drm:drm_addmap_core] offset = 0xd2680000, size = 0x02000000, type = 3 [ 61.137941] [drm:drm_addmap_core] AGP offset = 0xd2680000, size = 0x02000000 [ 61.137953] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x400c644a, nr=0x4a, dev 0xe200, auth=1 [ 61.137965] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x40086447, nr=0x47, dev 0xe200, auth=1 [ 61.137969] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x40086447, nr=0x47, dev 0xe200, auth=1 [ 61.138319] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 61.173489] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0106403, nr=0x03, dev 0xe200, auth=1 [ 61.173494] [drm:drm_irq_by_busid] 0:2:0 => IRQ 17 [ 61.173499] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x40086414, nr=0x14, dev 0xe200, auth=1 [ 61.173502] [drm:drm_irq_install] irq=17 [ 61.412159] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 61.442286] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 61.472418] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 61.502914] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 61.532924] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 61.569668] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 61.569734] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 61.577329] [drm:drm_stub_open] [ 61.577334] [drm:drm_open_helper] pid = 5553, minor = 0 [ 61.577352] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0246400, nr=0x00, dev 0xe200, auth=1 [ 61.577358] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0246400, nr=0x00, dev 0xe200, auth=1 [ 61.577368] [drm:drm_release] open_count = 2 [ 61.577371] [drm:drm_release] pid = 5553, device = 0xe200, open_count = 2 [ 61.577374] [drm:drm_fasync] fd = -1, device = 0xe200 [ 61.577399] [drm:drm_stub_open] [ 61.577402] [drm:drm_open_helper] pid = 5553, minor = 0 [ 61.577418] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1 [ 61.577421] [drm:drm_unlocked_ioctl] ret = -13 [ 61.577424] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0086401, nr=0x01, dev 0xe200, auth=1 [ 61.577428] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0086401, nr=0x01, dev 0xe200, auth=1 [ 61.577442] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x80046402, nr=0x02, dev 0xe200, auth=1 [ 61.577446] [drm:drm_add_magic] 1 [ 61.577448] [drm:drm_getmagic] 1 [ 61.577452] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0246400, nr=0x00, dev 0xe200, auth=1 [ 61.577456] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0246400, nr=0x00, dev 0xe200, auth=1 [ 61.577466] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x40046411, nr=0x11, dev 0xe200, auth=1 [ 61.577469] [drm:drm_authmagic] 1 [ 61.577471] [drm:drm_remove_magic] 1 [ 61.612798] [drm:drm_mmap_locked] start = 0xa70af000, end = 0xa76ef000, page offset = 0xd0100 [ 61.612810] [drm:drm_mmap_locked] Type = 3; start = 0xa70af000, end = 0xa76ef000, offset = 0xd0100000 [ 61.612813] [drm:drm_vm_open_locked] 0xa70af000,0x00640000 [ 61.612820] [drm:drm_mmap_locked] start = 0xb7b57000, end = 0xb7b59000, page offset = 0xf8f19 [ 61.612824] [drm:drm_vm_open_locked] 0xb7b57000,0x00002000 [ 61.625776] [drm:drm_do_vm_shm_nopage] 0xb7b58000 [ 61.625786] [drm:drm_mmap_locked] start = 0xa6a6f000, end = 0xa70af000, page offset = 0xd0100 [ 61.625797] [drm:drm_mmap_locked] Type = 3; start = 0xa6a6f000, end = 0xa70af000, offset = 0xd0100000 [ 61.625800] [drm:drm_vm_open_locked] 0xa6a6f000,0x00640000 [ 61.625805] [drm:drm_mmap_locked] start = 0xa642f000, end = 0xa6a6f000, page offset = 0xd1a00 [ 61.625813] [drm:drm_mmap_locked] Type = 3; start = 0xa642f000, end = 0xa6a6f000, offset = 0xd1a00000 [ 61.625816] [drm:drm_vm_open_locked] 0xa642f000,0x00640000 [ 61.625820] [drm:drm_mmap_locked] start = 0xa5def000, end = 0xa642f000, page offset = 0xd2040 [ 61.625830] [drm:drm_mmap_locked] Type = 3; start = 0xa5def000, end = 0xa642f000, offset = 0xd2040000 [ 61.625833] [drm:drm_vm_open_locked] 0xa5def000,0x00640000 [ 61.625837] [drm:drm_mmap_locked] start = 0xa3def000, end = 0xa5def000, page offset = 0xd2680 [ 61.625871] [drm:drm_mmap_locked] Type = 3; start = 0xa3def000, end = 0xa5def000, offset = 0xd2680000 [ 61.625874] [drm:drm_vm_open_locked] 0xa3def000,0x02000000 [ 61.625880] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0086446, nr=0x46, dev 0xe200, auth=1 [ 61.625885] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0086446, nr=0x46, dev 0xe200, auth=1 [ 61.684580] [drm:drm_vm_open_locked] 0xa3def000,0x02000000 [ 61.684610] [drm:drm_vm_open_locked] 0xa5def000,0x00640000 [ 61.684636] [drm:drm_vm_open_locked] 0xa642f000,0x00640000 [ 61.684663] [drm:drm_vm_open_locked] 0xa6a6f000,0x00640000 [ 61.684689] [drm:drm_vm_open_locked] 0xa70af000,0x00640000 [ 61.685675] [drm:drm_vm_open_locked] 0xb7ad6000,0x00002000 [ 61.685686] [drm:drm_vm_open_locked] 0xb7b57000,0x00002000 [ 61.687214] [drm:drm_vm_close] 0xa3def000,0x02000000 [ 61.687221] [drm:drm_vm_close] 0xa5def000,0x00640000 [ 61.687224] [drm:drm_vm_close] 0xa642f000,0x00640000 [ 61.687226] [drm:drm_vm_close] 0xa6a6f000,0x00640000 [ 61.687230] [drm:drm_vm_close] 0xa70af000,0x00640000 [ 61.687238] [drm:drm_vm_shm_close] 0xb7ad6000,0x00002000 [ 61.687244] [drm:drm_vm_shm_close] 0xb7b57000,0x00002000 [ 61.938176] trying to get vblank count for disabled pipe 1 [ 61.945156] trying to get vblank count for disabled pipe 1 [ 61.959152] [drm:drm_vm_open_locked] 0xa3def000,0x02000000 [ 61.959182] [drm:drm_vm_open_locked] 0xa5def000,0x00640000 [ 61.959208] [drm:drm_vm_open_locked] 0xa642f000,0x00640000 [ 61.959236] [drm:drm_vm_open_locked] 0xa6a6f000,0x00640000 [ 61.959261] [drm:drm_vm_open_locked] 0xa70af000,0x00640000 [ 61.960253] [drm:drm_vm_open_locked] 0xb7ad6000,0x00002000 [ 61.960266] [drm:drm_vm_open_locked] 0xb7b57000,0x00002000 [ 61.961769] [drm:drm_vm_close] 0xa3def000,0x02000000 [ 61.961775] [drm:drm_vm_close] 0xa5def000,0x00640000 [ 61.961779] [drm:drm_vm_close] 0xa642f000,0x00640000 [ 61.961781] [drm:drm_vm_close] 0xa6a6f000,0x00640000 [ 61.961785] [drm:drm_vm_close] 0xa70af000,0x00640000 [ 61.961791] [drm:drm_vm_shm_close] 0xb7ad6000,0x00002000 [ 61.961796] [drm:drm_vm_shm_close] 0xb7b57000,0x00002000 [ 63.449369] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 66.097100] eth0: no IPv6 routers present [ 182.193061] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 182.193075] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x40086414, nr=0x14, dev 0xe200, auth=1 [ 182.193079] [drm:drm_irq_uninstall] irq=17 [ 182.193090] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 182.259787] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 182.289902] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 187.736453] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 187.766582] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 187.796714] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 187.827214] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 187.857255] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 187.894147] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 187.894226] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4018641b, nr=0x1b, dev 0xe200, auth=1 [ 187.894230] [drm:drm_unlocked_ioctl] ret = -22 [ 187.894233] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0186415, nr=0x15, dev 0xe200, auth=1 [ 187.894237] [drm:drm_addmap_core] offset = 0xd0100000, size = 0x00500000, type = 3 [ 187.894241] [drm:drm_addmap_core] AGP offset = 0xd0100000, size = 0x00500000 [ 187.894255] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 187.894262] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x40446440, nr=0x40, dev 0xe200, auth=1 [ 187.894265] [drm:i915_dma_resume] [ 187.894267] [drm:i915_dma_resume] hw status page @ f3b57000 [ 187.894270] [drm:i915_dma_resume] Enabled hardware status page [ 187.894273] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0106403, nr=0x03, dev 0xe200, auth=1 [ 187.894277] [drm:drm_irq_by_busid] 0:2:0 => IRQ 17 [ 187.894280] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x40086414, nr=0x14, dev 0xe200, auth=1 [ 187.894283] [drm:drm_irq_install] irq=17 [ 187.917366] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 203.901071] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 203.901078] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x40086414, nr=0x14, dev 0xe200, auth=1 [ 203.901082] [drm:drm_irq_uninstall] irq=17 [ 203.901089] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 203.967756] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 203.997871] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 204.269351] Syncing filesystems ... done. [ 204.526495] PM: Preparing system for mem sleep [ 204.527430] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 204.527810] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 204.527833] PM: Entering mem sleep [ 204.527835] Suspending console(s) [ 204.527838] drm_sysfs_suspend [ 204.528196] ACPI: PCI interrupt for device 0000:00:02.0 disabled [ 204.963311] sd 6:0:1:0: [sdc] Synchronizing SCSI cache [ 204.963419] sd 6:0:1:0: [sdc] Stopping disk [ 204.963537] sd 6:0:0:0: [sdb] Synchronizing SCSI cache [ 204.963609] sd 6:0:0:0: [sdb] Stopping disk [ 205.097228] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 205.097565] sd 0:0:0:0: [sda] Stopping disk [ 205.098371] ACPI handle has no context! [ 205.099057] serial 00:09: disabled [ 205.104077] ACPI handle has no context! [ 205.127343] ACPI: PCI interrupt for device 0000:01:00.0 disabled [ 205.159000] ACPI: PCI interrupt for device 0000:02:00.0 disabled [ 205.286811] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [ 205.302731] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 205.302766] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 205.302799] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 205.302911] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 205.302949] ACPI handle has no context! [ 205.318700] ACPI: PCI interrupt for device 0000:00:1a.7 disabled [ 205.334678] ACPI: PCI interrupt for device 0000:00:1a.2 disabled [ 205.334713] ACPI: PCI interrupt for device 0000:00:1a.1 disabled [ 205.334747] ACPI: PCI interrupt for device 0000:00:1a.0 disabled [ 205.336018] Disabling non-boot CPUs ... [ 205.336040] CPU0 attaching NULL sched-domain. [ 205.336041] CPU1 attaching NULL sched-domain. [ 205.336043] CPU2 attaching NULL sched-domain. [ 205.336044] CPU3 attaching NULL sched-domain. [ 205.347172] kvm: disabling virtualization on CPU1 [ 205.450446] CPU 1 is now offline [ 205.450669] CPU0 attaching sched-domain: [ 205.450672] domain 0: span 0d [ 205.450673] groups: 01 0c [ 205.450676] CPU2 attaching sched-domain: [ 205.450678] domain 0: span 0c [ 205.450679] groups: 04 08 [ 205.450681] domain 1: span 0d [ 205.450683] groups: 0c 01 [ 205.450685] CPU3 attaching sched-domain: [ 205.450686] domain 0: span 0c [ 205.450688] groups: 08 04 [ 205.450690] domain 1: span 0d [ 205.450691] groups: 0c 01 [ 205.451042] CPU1 is down [ 205.451047] CPU0 attaching NULL sched-domain. [ 205.451049] CPU2 attaching NULL sched-domain. [ 205.451050] CPU3 attaching NULL sched-domain. [ 205.462486] kvm: disabling virtualization on CPU2 [ 205.566252] CPU 2 is now offline [ 205.566383] CPU0 attaching sched-domain: [ 205.566385] domain 0: span 09 [ 205.566386] groups: 01 08 [ 205.566388] CPU3 attaching sched-domain: [ 205.566390] domain 0: span 09 [ 205.566391] groups: 08 01 [ 205.566620] CPU2 is down [ 205.566624] CPU0 attaching NULL sched-domain. [ 205.566625] CPU3 attaching NULL sched-domain. [ 205.578292] kvm: disabling virtualization on CPU3 [ 205.682056] CPU 3 is now offline [ 205.682058] SMP alternatives: switching to UP code [ 205.683267] CPU0 attaching sched-domain: [ 205.683269] domain 0: span 01 [ 205.683270] groups: 01 [ 205.683417] CPU3 is down [ 0.986860] Back to C! [ 0.987160] Enabling non-boot CPUs ... [ 0.987213] CPU0 attaching NULL sched-domain. [ 0.997687] SMP alternatives: switching to SMP code [ 0.998541] Booting processor 1/1 eip 3000 [ 1.008792] Initializing CPU#1 [ 1.085449] Calibrating delay using timer specific routine.. 4810.90 BogoMIPS (lpj=9621816) [ 1.085454] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000 [ 1.085458] monitor/mwait feature present. [ 1.085459] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1.085461] CPU: L2 cache: 4096K [ 1.085462] CPU: Physical Processor ID: 0 [ 1.085463] CPU: Processor Core ID: 1 [ 1.085464] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000 [ 1.085992] CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 1.086006] checking TSC synchronization [CPU#0 -> CPU#1]: [ 1.105978] Measured 98245748331 cycles TSC warp between CPUs, turning off TSC clock. [ 1.105980] Marking TSC unstable due to: check_tsc_sync_source failed. [ 1.105985] Time: hpet clocksource has been installed. [ 1.105990] kvm: enabling virtualization on CPU1 [ 1.106003] CPU0 attaching sched-domain: [ 1.106004] domain 0: span 03 [ 1.106005] groups: 01 02 [ 1.106007] CPU1 attaching sched-domain: [ 1.106008] domain 0: span 03 [ 1.106009] groups: 02 01 [ 1.106264] CPU1 is up [ 1.106301] CPU0 attaching NULL sched-domain. [ 1.106303] CPU1 attaching NULL sched-domain. [ 1.109999] Switched to high resolution mode on CPU 1 [ 1.118004] SMP alternatives: switching to SMP code [ 1.118860] Booting processor 2/2 eip 3000 [ 1.129104] Initializing CPU#2 [ 1.209246] Calibrating delay using timer specific routine.. 4811.00 BogoMIPS (lpj=9622001) [ 1.209251] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000 [ 1.209255] monitor/mwait feature present. [ 1.209257] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1.209258] CPU: L2 cache: 4096K [ 1.209260] CPU: Physical Processor ID: 0 [ 1.209261] CPU: Processor Core ID: 2 [ 1.209261] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000 [ 1.209768] CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 1.209788] kvm: enabling virtualization on CPU2 [ 1.209809] CPU0 attaching sched-domain: [ 1.209811] domain 0: span 03 [ 1.209812] groups: 01 02 [ 1.209815] domain 1: span 07 [ 1.209816] groups: 03 04 [ 1.209818] CPU1 attaching sched-domain: [ 1.209820] domain 0: span 03 [ 1.209821] groups: 02 01 [ 1.209823] domain 1: span 07 [ 1.209825] groups: 03 04 [ 1.209827] CPU2 attaching sched-domain: [ 1.209828] domain 0: span 07 [ 1.209829] groups: 04 03 [ 1.210247] CPU2 is up [ 1.210315] CPU0 attaching NULL sched-domain. [ 1.210317] CPU1 attaching NULL sched-domain. [ 1.210318] CPU2 attaching NULL sched-domain. [ 1.213803] Switched to high resolution mode on CPU 2 [ 1.222346] SMP alternatives: switching to SMP code [ 1.223141] Booting processor 3/3 eip 3000 [ 1.233386] Initializing CPU#3 [ 1.313086] Calibrating delay using timer specific routine.. 4812.27 BogoMIPS (lpj=9624558) [ 1.313091] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000 [ 1.313095] monitor/mwait feature present. [ 1.313097] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1.313098] CPU: L2 cache: 4096K [ 1.313099] CPU: Physical Processor ID: 0 [ 1.313100] CPU: Processor Core ID: 3 [ 1.313101] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000 [ 1.313608] CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 1.313637] kvm: enabling virtualization on CPU3 [ 1.313652] CPU0 attaching sched-domain: [ 1.313653] domain 0: span 03 [ 1.313654] groups: 01 02 [ 1.313656] domain 1: span 0f [ 1.313657] groups: 03 0c [ 1.313659] CPU1 attaching sched-domain: [ 1.313660] domain 0: span 03 [ 1.313661] groups: 02 01 [ 1.313662] domain 1: span 0f [ 1.313663] groups: 03 0c [ 1.313664] CPU2 attaching sched-domain: [ 1.313665] domain 0: span 0c [ 1.313666] groups: 04 08 [ 1.313667] domain 1: span 0f [ 1.313668] groups: 0c 03 [ 1.313670] CPU3 attaching sched-domain: [ 1.313671] domain 0: span 0c [ 1.313672] groups: 08 04 [ 1.313673] domain 1: span 0f [ 1.313674] groups: 0c 03 [ 1.314070] CPU3 is up [ 1.314837] PM: Writing back config space on device 0000:00:02.0 at offset 8 (was 1, writing cc01) [ 1.314842] PM: Writing back config space on device 0000:00:02.0 at offset 2 (was 3800003, writing 3000003) [ 1.314845] PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003) [ 1.317634] Switched to high resolution mode on CPU 3 [ 1.324944] PM: Writing back config space on device 0000:00:02.0 at offset 2 (was 3800003, writing 3000003) [ 1.324958] PM: Writing back config space on device 0000:00:02.1 at offset 4 (was 0, writing fe900000) [ 1.324961] PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007) [ 1.324974] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 1.324978] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 1.325017] usb usb3: root hub lost power or was reset [ 1.325034] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 1.325038] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 1.325082] usb usb4: root hub lost power or was reset [ 1.325098] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 1.325101] PCI: Setting latency timer of device 0000:00:1a.2 to 64 [ 1.325144] usb usb5: root hub lost power or was reset [ 1.341053] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 19 [ 1.341058] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 1.357039] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002) [ 1.357055] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 18 [ 1.357060] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 1.434395] PM: Writing back config space on device 0000:00:1c.0 at offset f (was 20100, writing 2010a) [ 1.434411] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100106, writing 100506) [ 1.434438] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1.434446] PM: Writing back config space on device 0000:00:1c.4 at offset f (was 20100, writing 2010a) [ 1.434457] PM: Writing back config space on device 0000:00:1c.4 at offset 7 (was 2000d0d0, writing d0d0) [ 1.434466] PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100105, writing 100505) [ 1.434492] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 1.434500] PM: Writing back config space on device 0000:00:1c.5 at offset f (was 20200, writing 2020b) [ 1.434511] PM: Writing back config space on device 0000:00:1c.5 at offset 7 (was f0, writing 200000f0) [ 1.434520] PM: Writing back config space on device 0000:00:1c.5 at offset 1 (was 100106, writing 100506) [ 1.434546] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 1.434555] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 1.434560] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 1.434604] usb usb6: root hub lost power or was reset [ 1.434620] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 22 [ 1.434624] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 1.434661] usb usb7: root hub lost power or was reset [ 1.434677] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 1.434680] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 1.434718] usb usb8: root hub lost power or was reset [ 1.448865] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 [ 1.448870] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 1.448916] PM: Writing back config space on device 0000:00:1e.0 at offset f (was 20000, writing 200ff) [ 1.448943] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 1.464870] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407) [ 1.464904] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 2.483195] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 2.483202] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 2.499123] PM: Writing back config space on device 0000:01:00.0 at offset f (was 100, writing 10a) [ 2.499131] PM: Writing back config space on device 0000:01:00.0 at offset c (was 0, writing feaa0000) [ 2.499148] PM: Writing back config space on device 0000:01:00.0 at offset 3 (was 0, writing 8) [ 2.499155] PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 100000, writing 100006) [ 2.499179] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 2.507440] atl1 0000:01:00.0: eth0 link is up 100 Mbps full duplex [ 2.575628] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 2.583622] serial 00:09: activated [ 2.583631] i8042 kbd 00:0b: activation failed [ 2.583704] i8042 aux 00:0c: activation failed [ 2.583876] sd 0:0:0:0: [sda] Starting disk [ 2.790629] ata5: SATA link down (SStatus 0 SControl 300) [ 2.790641] ata3: SATA link down (SStatus 0 SControl 300) [ 2.790652] ata4: SATA link down (SStatus 0 SControl 300) [ 2.790662] ata6: SATA link down (SStatus 0 SControl 300) [ 4.116395] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.614749] ata2.00: configured for UDMA/100 [ 6.564766] ata7.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out [ 6.564769] ata7.01: ACPI cmd ef/03:42:00:00:00:b0 filtered out [ 6.564771] ata7.01: ACPI cmd f5/00:00:00:00:00:00 filtered out [ 6.572755] ata7.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 6.572758] ata7.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out [ 6.572766] ata7.00: ACPI cmd f5/00:00:00:00:00:00 filtered out [ 6.590776] ata7.00: configured for UDMA/33 [ 6.597358] ata7.01: configured for UDMA/33 [ 6.597389] sd 6:0:0:0: [sdb] 398297088 512-byte hardware sectors (203928 MB) [ 6.597405] sd 6:0:0:0: [sdb] Write Protect is off [ 6.597408] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 6.597431] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.597455] sd 6:0:1:0: [sdc] 488397168 512-byte hardware sectors (250059 MB) [ 6.597466] sd 6:0:1:0: [sdc] Write Protect is off [ 6.597469] sd 6:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 6.597489] sd 6:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.597509] sd 6:0:0:0: [sdb] 398297088 512-byte hardware sectors (203928 MB) [ 6.597521] sd 6:0:0:0: [sdb] Write Protect is off [ 6.597523] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 6.597545] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.597566] sd 6:0:1:0: [sdc] 488397168 512-byte hardware sectors (250059 MB) [ 6.597576] sd 6:0:1:0: [sdc] Write Protect is off [ 6.597578] sd 6:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 6.597598] sd 6:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.143944] ata1: port is slow to respond, please be patient (Status 0x80) [ 12.498309] ata1: softreset failed (device not ready) [ 13.137238] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 13.140343] ata1.00: configured for UDMA/133 [ 13.153233] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 13.153247] sd 0:0:0:0: [sda] Write Protect is off [ 13.153249] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 13.153271] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.181446] sd 6:0:0:0: [sdb] Starting disk [ 13.200344] sd 6:0:1:0: [sdc] Starting disk [ 14.231415] PM: Writing back config space on device 0000:00:02.0 at offset 2 (was 3800003, writing 3000003) [ 14.231429] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 14.233531] PM: Finishing wakeup. [ 14.233533] Restarting tasks ... <6>usb 5-2: USB disconnect, address 2 [ 14.234048] done. [ 14.453615] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 14.483771] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 14.513931] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 14.515475] usb 5-2: new low speed USB device using uhci_hcd and address 3 [ 14.544425] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 14.574434] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 14.611667] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 14.611744] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 14.611748] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x40446440, nr=0x40, dev 0xe200, auth=1 [ 14.611752] [drm:i915_dma_resume] [ 14.611754] [drm:i915_dma_resume] hw status page @ f3b57000 [ 14.611756] [drm:i915_dma_resume] Enabled hardware status page [ 14.611759] [drm:drm_unlocked_ioctl] pid=5553, cmd=0xc0106403, nr=0x03, dev 0xe200, auth=1 [ 14.611763] [drm:drm_irq_by_busid] 0:2:0 => IRQ 17 [ 14.611766] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x40086414, nr=0x14, dev 0xe200, auth=1 [ 14.611770] [drm:drm_irq_install] irq=17 [ 14.634806] [drm:drm_unlocked_ioctl] pid=5553, cmd=0x4004644d, nr=0x4d, dev 0xe200, auth=1 [ 14.698771] usb 5-2: configuration #1 chosen from 1 choice [ 14.754144] input: Microsoft Microsoft Wireless Optical Mouse® 1.00 as /class/input/input5 [ 14.782506] input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.00] on usb-0000:00:1a.2-2