[ 0.000000] Linux version 4.16.0-rc7-gf7ceee8ca796 (root@surfplank2.hierzo) (gcc version 8.1.1 20180502 (Red Hat 8.1.1-1) (GCC)) #1 SMP PREEMPT Sat Jun 2 06:45:42 CEST 2018 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.16.0-rc7-gf7ceee8ca796 ro root=/dev/myvg/rootlv noexec=on noexec32=on vga=0x0F01 SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us acpi_enforce_resources=lax fbcon=font:VGA8x16 radeon.pcie_gen2=1 cgroup_disable=memory threadirqs plymouth.enable=0 rd.plymouth=0 mce=dont_log_ce panic=0 rd.lvm.vg=myvg radeon.dpm=1 zswap.enabled=1 rd.auto=1 audit=0 systemd.log_level=warning ip=192.168.10.70::192.168.10.98:255.255.255.0:::off:192.168.10.98 rd.neednet=1 net.ifnames=0 initrd=/initramfs-4.16.0-rc7-gf7ceee8ca796.img [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000400a000-0x0000000009cfffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000db678fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db679000-0x00000000db79ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000db7a0000-0x00000000db8cafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db8cb000-0x00000000dbc9cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dbc9d000-0x00000000dceb4fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dceb5000-0x00000000deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd800000-0x00000000fdffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000003deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000003df000000-0x000000041effffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 3.1.1 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. X470 AORUS ULTRA GAMING/X470 AORUS ULTRA GAMING-CF, BIOS F2 03/14/2018 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x3df000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000420000000 aka 16896M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x2f3eb000, 0x2f3ebfff] PGTABLE [ 0.000000] BRK [0x2f3ec000, 0x2f3ecfff] PGTABLE [ 0.000000] BRK [0x2f3ed000, 0x2f3edfff] PGTABLE [ 0.000000] BRK [0x2f3ee000, 0x2f3eefff] PGTABLE [ 0.000000] BRK [0x2f3ef000, 0x2f3effff] PGTABLE [ 0.000000] BRK [0x2f3f0000, 0x2f3f0fff] PGTABLE [ 0.000000] BRK [0x2f3f1000, 0x2f3f1fff] PGTABLE [ 0.000000] BRK [0x2f3f2000, 0x2f3f2fff] PGTABLE [ 0.000000] BRK [0x2f3f3000, 0x2f3f3fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x7ea5c000-0x7fffffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000DB8CB098 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DB8D1A10 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180105/tbfadt-658) [ 0.000000] ACPI: DSDT 0x00000000DB8CB1E8 006822 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000DBC86E00 000040 [ 0.000000] ACPI: APIC 0x00000000DB8D1B28 0000DE (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DB8D1C08 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000DB8D1C50 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000DB8D1CF0 005367 (v02 AMD AmdTable 00000002 MSFT 02000002) [ 0.000000] ACPI: SSDT 0x00000000DB8D7058 00119C (v01 AMD AMD CPU 00000001 AMD 00000001) [ 0.000000] ACPI: CRAT 0x00000000DB8D81F8 000810 (v01 AMD AMD CRAT 00000001 AMD 00000001) [ 0.000000] ACPI: CDIT 0x00000000DB8D8A08 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x00000000DB8D8A38 002E6E (v01 AMD AMD AOD 00000001 INTL 20120913) [ 0.000000] ACPI: MCFG 0x00000000DB8DB8A8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 0x00000000DB8DB8E8 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: UEFI 0x00000000DB8DB920 000042 (v01 00000000 00000000) [ 0.000000] ACPI: IVRS 0x00000000DB8DB968 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000) [ 0.000000] ACPI: SSDT 0x00000000DB8DBA38 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DB8DBB30 000E96 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DB8DC9C8 000850 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DB8DD218 001A41 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.000000] ACPI: WSMT 0x00000000DB8DEC60 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: Using PIT calibration value [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000003deffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000003ffffff] [ 0.000000] node 0: [mem 0x000000000400a000-0x0000000009cfffff] [ 0.000000] node 0: [mem 0x000000000a000000-0x000000000affffff] [ 0.000000] node 0: [mem 0x000000000b020000-0x00000000db678fff] [ 0.000000] node 0: [mem 0x00000000db7a0000-0x00000000db8cafff] [ 0.000000] node 0: [mem 0x00000000dceb5000-0x00000000deffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000003deffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000003deffffff] [ 0.000000] On node 0 totalpages: 3917153 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12341 pages used for memmap [ 0.000000] DMA32 zone: 902597 pages, LIFO batch:31 [ 0.000000] Normal zone: 41160 pages used for memmap [ 0.000000] Normal zone: 3010560 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 100 pages [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 42 pages/cpu @ (ptrval) s132696 r8192 d31144 u262144 [ 0.000000] pcpu-alloc: s132696 r8192 d31144 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3863575 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.16.0-rc7-gf7ceee8ca796 ro root=/dev/myvg/rootlv noexec=on noexec32=on vga=0x0F01 SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us acpi_enforce_resources=lax fbcon=font:VGA8x16 radeon.pcie_gen2=1 cgroup_disable=memory threadirqs plymouth.enable=0 rd.plymouth=0 mce=dont_log_ce panic=0 rd.lvm.vg=myvg radeon.dpm=1 zswap.enabled=1 rd.auto=1 audit=0 systemd.log_level=warning ip=192.168.10.70::192.168.10.98:255.255.255.0:::off:192.168.10.98 rd.neednet=1 net.ifnames=0 initrd=/initramfs-4.16.0-rc7-gf7ceee8ca796.img [ 0.000000] audit: disabled (until reboot) [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Memory: 15316892K/15668612K available (10248K kernel code, 557K rwdata, 2300K rodata, 944K init, 388K bss, 351720K reserved, 0K cma-reserved) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 4352, nr_irqs: 1032, preallocated irqs: 16 [ 0.000000] Console: colour VGA+ 80x50 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180105 [ 0.000000] ACPI BIOS Error (bug): Failure creating [\_SB.SMIC], AE_ALREADY_EXISTS (20180105/dswload-380) [ 0.000000] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180105/psobject-252) [ 0.000000] ACPI Error: AE_ALREADY_EXISTS, (SSDT: AMD PT) while loading table (20180105/tbxfload-228) [ 0.000000] ACPI Error: 1 table load failures, 7 successful (20180105/tbxfload-246) [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.024000] tsc: Fast TSC calibration failed [ 0.032000] tsc: PIT calibration matches HPET. 1 loops [ 0.036000] tsc: Detected 3600.075 MHz processor [ 0.036000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e499fc43d, max_idle_ns: 440795299786 ns [ 0.036000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.15 BogoMIPS (lpj=14400300) [ 0.036000] pid_max: default: 32768 minimum: 301 [ 0.036000] Security Framework initialized [ 0.036000] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.036000] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.036000] CPU: Physical Processor ID: 0 [ 0.036000] CPU: Processor Core ID: 0 [ 0.036000] mce: CPU supports 23 MCE banks [ 0.036000] LVT offset 1 assigned for vector 0xf9 [ 0.036000] LVT offset 2 assigned for vector 0xf4 [ 0.040008] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.040687] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0 [ 0.040894] Spectre V2 : Mitigation: Full AMD retpoline [ 0.041083] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.041404] Freeing SMP alternatives memory: 28K [ 0.048000] smpboot: CPU0: AMD Ryzen 5 2400G with Radeon Vega Graphics (family: 0x17, model: 0x11, stepping: 0x0) [ 0.060009] Performance Events: Fam17h core perfctr, AMD PMU driver. [ 0.060232] ... version: 0 [ 0.060408] ... bit width: 48 [ 0.060585] ... generic registers: 6 [ 0.060761] ... value mask: 0000ffffffffffff [ 0.060953] ... max period: 00007fffffffffff [ 0.061143] ... fixed-purpose events: 0 [ 0.061319] ... event mask: 000000000000003f [ 0.068004] Hierarchical SRCU implementation. [ 0.078086] MCE: In-kernel MCE decoding enabled. [ 0.084003] smp: Bringing up secondary CPUs ... [ 0.112019] x86: Booting SMP configuration: [ 0.112207] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.282190] smp: Brought up 1 node, 8 CPUs [ 0.282190] smpboot: Max logical packages: 1 [ 0.282190] smpboot: Total of 8 processors activated (57601.20 BogoMIPS) [ 0.284003] devtmpfs: initialized [ 0.284388] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.284388] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.284579] xor: automatically using best checksumming function avx [ 0.285435] NET: Registered protocol family 16 [ 0.285819] cpuidle: using governor ladder [ 0.285819] cpuidle: using governor menu [ 0.285819] ACPI: bus type PCI registered [ 0.285819] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.285819] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.285819] PCI: Using configuration type 1 for base access [ 0.288835] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.288835] cryptd: max_cpu_qlen set to 1000 [ 0.356002] raid6: sse2x1 gen() 8742 MB/s [ 0.424003] raid6: sse2x1 xor() 9450 MB/s [ 0.492003] raid6: sse2x2 gen() 18144 MB/s [ 0.560001] raid6: sse2x2 xor() 11596 MB/s [ 0.628001] raid6: sse2x4 gen() 18648 MB/s [ 0.696001] raid6: sse2x4 xor() 11108 MB/s [ 0.764001] raid6: avx2x1 gen() 19939 MB/s [ 0.832001] raid6: avx2x1 xor() 14953 MB/s [ 0.900001] raid6: avx2x2 gen() 24875 MB/s [ 0.968001] raid6: avx2x2 xor() 16458 MB/s [ 1.036003] raid6: avx2x4 gen() 26891 MB/s [ 1.104001] raid6: avx2x4 xor() 15778 MB/s [ 1.104190] raid6: using algorithm avx2x4 gen() 26891 MB/s [ 1.104383] raid6: .... xor() 15778 MB/s, rmw enabled [ 1.104572] raid6: using avx2x2 recovery algorithm [ 1.104790] ACPI: Added _OSI(Module Device) [ 1.104790] ACPI: Added _OSI(Processor Device) [ 1.104790] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.104790] ACPI: Added _OSI(Processor Aggregator Device) [ 1.104895] ACPI BIOS Error (bug): Failure looking up [\PTOS], AE_NOT_FOUND (20180105/psargs-364) [ 1.104895] ACPI Error: Method parse/execution failed \, AE_NOT_FOUND (20180105/psparse-550) [ 1.104895] ACPI: Executed 2 blocks of module-level executable AML code [ 1.109262] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 1.110498] ACPI: Interpreter enabled [ 1.110682] ACPI: (supports S0 S5) [ 1.110850] ACPI: Using IOAPIC for interrupt routing [ 1.111282] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.111738] ACPI: Enabled 3 GPEs in block 00 to 1F [ 1.113695] ACPI: Power Resource [P0ST] (on) [ 1.113912] ACPI: Power Resource [P3ST] (on) [ 1.117706] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.117914] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.118325] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 1.118602] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 1.119061] PCI host bridge to bus 0000:00 [ 1.119242] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.119449] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.119657] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.119865] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.120003] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.120268] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 1.120533] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window] [ 1.120799] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ 1.121064] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.121263] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000 [ 1.121361] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600 [ 1.121495] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 [ 1.121599] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400 [ 1.121702] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold [ 1.121792] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 [ 1.121888] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400 [ 1.121939] pci 0000:00:08.1: enabling Extended Tags [ 1.122182] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 1.122246] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400 [ 1.122295] pci 0000:00:08.2: enabling Extended Tags [ 1.122533] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold [ 1.122622] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 1.122786] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 1.122948] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000 [ 1.122986] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000 [ 1.123031] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000 [ 1.123068] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000 [ 1.123098] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000 [ 1.123136] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000 [ 1.123174] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000 [ 1.123211] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000 [ 1.123314] pci 0000:01:00.0: [1022:43d0] type 00 class 0x0c0330 [ 1.123343] pci 0000:01:00.0: reg 0x10: [mem 0xfe8a0000-0xfe8a7fff 64bit] [ 1.123443] pci 0000:01:00.0: PME# supported from D3hot D3cold [ 1.123509] pci 0000:01:00.1: [1022:43c8] type 00 class 0x010601 [ 1.123570] pci 0000:01:00.1: reg 0x24: [mem 0xfe880000-0xfe89ffff] [ 1.123580] pci 0000:01:00.1: reg 0x30: [mem 0xfe800000-0xfe87ffff pref] [ 1.123629] pci 0000:01:00.1: PME# supported from D3hot D3cold [ 1.123671] pci 0000:01:00.2: [1022:43c6] type 01 class 0x060400 [ 1.123767] pci 0000:01:00.2: PME# supported from D3hot D3cold [ 1.136027] pci 0000:00:01.2: PCI bridge to [bus 01-08] [ 1.136232] pci 0000:00:01.2: bridge window [io 0xd000-0xefff] [ 1.136235] pci 0000:00:01.2: bridge window [mem 0xfe500000-0xfe8fffff] [ 1.136318] pci 0000:02:00.0: [1022:43c7] type 01 class 0x060400 [ 1.136433] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 1.136513] pci 0000:02:01.0: [1022:43c7] type 01 class 0x060400 [ 1.136628] pci 0000:02:01.0: PME# supported from D3hot D3cold [ 1.136700] pci 0000:02:02.0: [1022:43c7] type 01 class 0x060400 [ 1.136814] pci 0000:02:02.0: PME# supported from D3hot D3cold [ 1.136886] pci 0000:02:03.0: [1022:43c7] type 01 class 0x060400 [ 1.137001] pci 0000:02:03.0: PME# supported from D3hot D3cold [ 1.137088] pci 0000:02:04.0: [1022:43c7] type 01 class 0x060400 [ 1.137203] pci 0000:02:04.0: PME# supported from D3hot D3cold [ 1.137282] pci 0000:02:09.0: [1022:43c7] type 01 class 0x060400 [ 1.137397] pci 0000:02:09.0: PME# supported from D3hot D3cold [ 1.137484] pci 0000:01:00.2: PCI bridge to [bus 02-08] [ 1.137689] pci 0000:01:00.2: bridge window [io 0xd000-0xefff] [ 1.137692] pci 0000:01:00.2: bridge window [mem 0xfe500000-0xfe7fffff] [ 1.137760] pci 0000:03:00.0: [9710:9922] type 00 class 0x070002 [ 1.137807] pci 0000:03:00.0: reg 0x10: [io 0xe010-0xe017] [ 1.137826] pci 0000:03:00.0: reg 0x14: [mem 0xfe703000-0xfe703fff] [ 1.137899] pci 0000:03:00.0: reg 0x24: [mem 0xfe702000-0xfe702fff] [ 1.138036] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 1.138130] pci 0000:03:00.1: [9710:9922] type 00 class 0x070002 [ 1.138174] pci 0000:03:00.1: reg 0x10: [io 0xe000-0xe007] [ 1.138193] pci 0000:03:00.1: reg 0x14: [mem 0xfe701000-0xfe701fff] [ 1.138266] pci 0000:03:00.1: reg 0x24: [mem 0xfe700000-0xfe700fff] [ 1.138387] pci 0000:03:00.1: PME# supported from D3hot D3cold [ 1.152039] pci 0000:02:00.0: PCI bridge to [bus 03] [ 1.152237] pci 0000:02:00.0: bridge window [io 0xe000-0xefff] [ 1.152237] pci 0000:02:00.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 1.152237] pci 0000:02:01.0: PCI bridge to [bus 04] [ 1.152332] pci 0000:02:02.0: PCI bridge to [bus 05] [ 1.152604] pci 0000:06:00.0: [8086:1539] type 00 class 0x020000 [ 1.152655] pci 0000:06:00.0: reg 0x10: [mem 0xfe600000-0xfe61ffff] [ 1.152692] pci 0000:06:00.0: reg 0x18: [io 0xd000-0xd01f] [ 1.152711] pci 0000:06:00.0: reg 0x1c: [mem 0xfe620000-0xfe623fff] [ 1.152901] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.164031] pci 0000:02:03.0: PCI bridge to [bus 06] [ 1.164233] pci 0000:02:03.0: bridge window [io 0xd000-0xdfff] [ 1.164237] pci 0000:02:03.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 1.164283] pci 0000:02:04.0: PCI bridge to [bus 07] [ 1.164546] pci 0000:08:00.0: [1b21:1343] type 00 class 0x0c0330 [ 1.164595] pci 0000:08:00.0: reg 0x10: [mem 0xfe500000-0xfe507fff 64bit] [ 1.164775] pci 0000:08:00.0: PME# supported from D3hot D3cold [ 1.176028] pci 0000:02:09.0: PCI bridge to [bus 08] [ 1.176226] pci 0000:02:09.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 1.176226] pci 0000:09:00.0: [1002:15dd] type 00 class 0x030000 [ 1.176226] pci 0000:09:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 1.176226] pci 0000:09:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref] [ 1.176226] pci 0000:09:00.0: reg 0x20: [io 0xf000-0xf0ff] [ 1.176226] pci 0000:09:00.0: reg 0x24: [mem 0xfe400000-0xfe47ffff] [ 1.176236] pci 0000:09:00.0: enabling Extended Tags [ 1.176529] pci 0000:09:00.0: PME# supported from D1 D2 D3hot D3cold [ 1.176635] pci 0000:09:00.1: [1002:15de] type 00 class 0x040300 [ 1.176664] pci 0000:09:00.1: reg 0x10: [mem 0xfe488000-0xfe48bfff] [ 1.176736] pci 0000:09:00.1: enabling Extended Tags [ 1.176993] pci 0000:09:00.1: PME# supported from D1 D2 D3hot D3cold [ 1.177060] pci 0000:09:00.2: [1022:15df] type 00 class 0x108000 [ 1.177110] pci 0000:09:00.2: reg 0x18: [mem 0xfe300000-0xfe3fffff] [ 1.177143] pci 0000:09:00.2: reg 0x24: [mem 0xfe48c000-0xfe48dfff] [ 1.177162] pci 0000:09:00.2: enabling Extended Tags [ 1.177491] pci 0000:09:00.3: [1022:15e0] type 00 class 0x0c0330 [ 1.177526] pci 0000:09:00.3: reg 0x10: [mem 0xfe200000-0xfe2fffff 64bit] [ 1.177587] pci 0000:09:00.3: enabling Extended Tags [ 1.177851] pci 0000:09:00.3: PME# supported from D0 D3hot D3cold [ 1.177920] pci 0000:09:00.4: [1022:15e1] type 00 class 0x0c0330 [ 1.177955] pci 0000:09:00.4: reg 0x10: [mem 0xfe100000-0xfe1fffff 64bit] [ 1.178016] pci 0000:09:00.4: enabling Extended Tags [ 1.178280] pci 0000:09:00.4: PME# supported from D0 D3hot D3cold [ 1.178350] pci 0000:09:00.6: [1022:15e3] type 00 class 0x040300 [ 1.178379] pci 0000:09:00.6: reg 0x10: [mem 0xfe480000-0xfe487fff] [ 1.178451] pci 0000:09:00.6: enabling Extended Tags [ 1.178707] pci 0000:09:00.6: PME# supported from D0 D3hot D3cold [ 1.178845] pci 0000:00:08.1: PCI bridge to [bus 09] [ 1.179038] pci 0000:00:08.1: bridge window [io 0xf000-0xffff] [ 1.179041] pci 0000:00:08.1: bridge window [mem 0xfe100000-0xfe4fffff] [ 1.179046] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 1.179118] pci 0000:0a:00.0: [1022:7901] type 00 class 0x010601 [ 1.179200] pci 0000:0a:00.0: reg 0x24: [mem 0xfe900000-0xfe9007ff] [ 1.179220] pci 0000:0a:00.0: enabling Extended Tags [ 1.179482] pci 0000:0a:00.0: PME# supported from D3hot D3cold [ 1.179580] pci 0000:00:08.2: PCI bridge to [bus 0a] [ 1.179776] pci 0000:00:08.2: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.179808] pci_bus 0000:00: on NUMA node 0 [ 1.180260] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 [ 1.180517] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 [ 1.180765] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 [ 1.181026] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 [ 1.181280] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ 1.181528] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ 1.181774] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 1.182020] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 1.184022] pci 0000:09:00.0: vgaarb: setting as boot VGA device [ 1.184216] pci 0000:09:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.184495] pci 0000:09:00.0: vgaarb: bridge control possible [ 1.184690] vgaarb: loaded [ 1.184931] SCSI subsystem initialized [ 1.185117] libata version 3.00 loaded. [ 1.185117] ACPI: bus type USB registered [ 1.185117] usbcore: registered new interface driver usbfs [ 1.185117] usbcore: registered new interface driver hub [ 1.185117] usbcore: registered new device driver usb [ 1.185117] pps_core: LinuxPPS API ver. 1 registered [ 1.185117] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.185117] EDAC MC: Ver: 3.0.0 [ 1.185117] PCI: Using ACPI for IRQ routing [ 1.188509] PCI: pci_cache_line_size set to 64 bytes [ 1.188618] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 1.188619] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff] [ 1.188620] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff] [ 1.188620] e820: reserve RAM buffer [mem 0xdb679000-0xdbffffff] [ 1.188621] e820: reserve RAM buffer [mem 0xdb8cb000-0xdbffffff] [ 1.188622] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ 1.188622] e820: reserve RAM buffer [mem 0x3df000000-0x3dfffffff] [ 1.188816] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.189003] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 1.192002] clocksource: Switched to clocksource tsc-early [ 1.192002] VFS: Disk quotas dquot_6.6.0 [ 1.192002] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.192720] pnp: PnP ACPI init [ 1.192952] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 1.193166] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.193225] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved [ 1.193439] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.193504] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.193598] system 00:03: [io 0x0a00-0x0a2f] has been reserved [ 1.193800] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 1.193998] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 1.194197] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.194363] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 1.194566] system 00:04: [io 0x040b] has been reserved [ 1.194757] system 00:04: [io 0x04d6] has been reserved [ 1.194948] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 1.195145] system 00:04: [io 0x0c14] has been reserved [ 1.195336] system 00:04: [io 0x0c50-0x0c51] has been reserved [ 1.195534] system 00:04: [io 0x0c52] has been reserved [ 1.195725] system 00:04: [io 0x0c6c] has been reserved [ 1.195915] system 00:04: [io 0x0c6f] has been reserved [ 1.199102] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 1.199219] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 1.199337] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 1.199455] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 1.199580] system 00:04: [io 0x0cd8-0x0cdf] has been reserved [ 1.199698] system 00:04: [io 0x0800-0x089f] has been reserved [ 1.199816] system 00:04: [io 0x0b00-0x0b0f] has been reserved [ 1.199932] system 00:04: [io 0x0b20-0x0b3f] has been reserved [ 1.200043] system 00:04: [io 0x0900-0x090f] has been reserved [ 1.200152] system 00:04: [io 0x0910-0x091f] has been reserved [ 1.200261] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.200376] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved [ 1.200490] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 1.200603] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.200716] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 1.200830] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved [ 1.200943] system 00:04: [mem 0xff000000-0xffffffff] has been reserved [ 1.201057] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.201309] pnp: PnP ACPI: found 5 devices [ 1.207041] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.207247] pci 0000:02:00.0: PCI bridge to [bus 03] [ 1.207355] pci 0000:02:00.0: bridge window [io 0xe000-0xefff] [ 1.207465] pci 0000:02:00.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 1.207580] pci 0000:02:01.0: PCI bridge to [bus 04] [ 1.207689] pci 0000:02:02.0: PCI bridge to [bus 05] [ 1.207799] pci 0000:02:03.0: PCI bridge to [bus 06] [ 1.207901] pci 0000:02:03.0: bridge window [io 0xd000-0xdfff] [ 1.208014] pci 0000:02:03.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 1.208129] pci 0000:02:04.0: PCI bridge to [bus 07] [ 1.208238] pci 0000:02:09.0: PCI bridge to [bus 08] [ 1.208343] pci 0000:02:09.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 1.208458] pci 0000:01:00.2: PCI bridge to [bus 02-08] [ 1.208562] pci 0000:01:00.2: bridge window [io 0xd000-0xefff] [ 1.208671] pci 0000:01:00.2: bridge window [mem 0xfe500000-0xfe7fffff] [ 1.208786] pci 0000:00:01.2: PCI bridge to [bus 01-08] [ 1.208889] pci 0000:00:01.2: bridge window [io 0xd000-0xefff] [ 1.208998] pci 0000:00:01.2: bridge window [mem 0xfe500000-0xfe8fffff] [ 1.209113] pci 0000:00:08.1: PCI bridge to [bus 09] [ 1.209215] pci 0000:00:08.1: bridge window [io 0xf000-0xffff] [ 1.209324] pci 0000:00:08.1: bridge window [mem 0xfe100000-0xfe4fffff] [ 1.209436] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 1.209586] pci 0000:00:08.2: PCI bridge to [bus 0a] [ 1.209689] pci 0000:00:08.2: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.209804] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 1.209805] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 1.209806] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 1.209807] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 1.209807] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 1.209808] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 1.209809] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window] [ 1.209810] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window] [ 1.209811] pci_bus 0000:01: resource 0 [io 0xd000-0xefff] [ 1.209812] pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe8fffff] [ 1.209813] pci_bus 0000:02: resource 0 [io 0xd000-0xefff] [ 1.209813] pci_bus 0000:02: resource 1 [mem 0xfe500000-0xfe7fffff] [ 1.209814] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 1.209815] pci_bus 0000:03: resource 1 [mem 0xfe700000-0xfe7fffff] [ 1.209816] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff] [ 1.209817] pci_bus 0000:06: resource 1 [mem 0xfe600000-0xfe6fffff] [ 1.209818] pci_bus 0000:08: resource 1 [mem 0xfe500000-0xfe5fffff] [ 1.209818] pci_bus 0000:09: resource 0 [io 0xf000-0xffff] [ 1.209819] pci_bus 0000:09: resource 1 [mem 0xfe100000-0xfe4fffff] [ 1.209820] pci_bus 0000:09: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] [ 1.209821] pci_bus 0000:0a: resource 1 [mem 0xfe900000-0xfe9fffff] [ 1.209956] NET: Registered protocol family 2 [ 1.210234] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) [ 1.210399] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.210652] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.210851] TCP: Hash tables configured (established 131072 bind 65536) [ 1.211002] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.211137] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.211334] NET: Registered protocol family 1 [ 1.211683] pci 0000:09:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.211839] pci 0000:09:00.1: Linked as a consumer to 0000:09:00.0 [ 1.212134] PCI: CLS 64 bytes, default 64 [ 1.212163] Trying to unpack rootfs image as initramfs... [ 1.455982] Freeing initrd memory: 22160K [ 1.456215] AMD-Vi: Unable to write to IOMMU perf counter. [ 1.456470] pci 0000:00:00.2: can't derive routing for PCI INT A [ 1.456673] pci 0000:00:00.2: PCI INT A: not connected [ 1.457574] iommu: Adding device 0000:00:01.0 to group 0 [ 1.458149] iommu: Adding device 0000:00:01.2 to group 1 [ 1.458728] iommu: Adding device 0000:00:08.0 to group 2 [ 1.459301] iommu: Adding device 0000:00:08.1 to group 3 [ 1.459515] iommu: Adding device 0000:00:08.2 to group 2 [ 1.460087] iommu: Adding device 0000:00:14.0 to group 4 [ 1.460290] iommu: Adding device 0000:00:14.3 to group 4 [ 1.460871] iommu: Adding device 0000:00:18.0 to group 5 [ 1.461075] iommu: Adding device 0000:00:18.1 to group 5 [ 1.461277] iommu: Adding device 0000:00:18.2 to group 5 [ 1.461487] iommu: Adding device 0000:00:18.3 to group 5 [ 1.461690] iommu: Adding device 0000:00:18.4 to group 5 [ 1.461892] iommu: Adding device 0000:00:18.5 to group 5 [ 1.462094] iommu: Adding device 0000:00:18.6 to group 5 [ 1.462297] iommu: Adding device 0000:00:18.7 to group 5 [ 1.462881] iommu: Adding device 0000:01:00.0 to group 6 [ 1.463095] iommu: Adding device 0000:01:00.1 to group 6 [ 1.463317] iommu: Adding device 0000:01:00.2 to group 6 [ 1.463522] iommu: Adding device 0000:02:00.0 to group 6 [ 1.463726] iommu: Adding device 0000:02:01.0 to group 6 [ 1.463930] iommu: Adding device 0000:02:02.0 to group 6 [ 1.464138] iommu: Adding device 0000:02:03.0 to group 6 [ 1.464350] iommu: Adding device 0000:02:04.0 to group 6 [ 1.464554] iommu: Adding device 0000:02:09.0 to group 6 [ 1.464762] iommu: Adding device 0000:03:00.0 to group 6 [ 1.464976] iommu: Adding device 0000:03:00.1 to group 6 [ 1.465187] iommu: Adding device 0000:06:00.0 to group 6 [ 1.465399] iommu: Adding device 0000:08:00.0 to group 6 [ 1.466038] iommu: Adding device 0000:09:00.0 to group 7 [ 1.466300] iommu: Using direct mapping for device 0000:09:00.0 [ 1.466560] iommu: Adding device 0000:09:00.1 to group 8 [ 1.466784] iommu: Adding device 0000:09:00.2 to group 8 [ 1.467005] iommu: Adding device 0000:09:00.3 to group 8 [ 1.467213] iommu: Adding device 0000:09:00.4 to group 8 [ 1.467414] iommu: Adding device 0000:09:00.6 to group 8 [ 1.467599] iommu: Adding device 0000:0a:00.0 to group 2 [ 1.467954] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 1.468133] AMD-Vi: Extended features (0x4f77ef22294ada): [ 1.468302] PPR NX GT IA GA PC GA_vAPIC [ 1.468475] AMD-Vi: Interrupt remapping enabled [ 1.468656] AMD-Vi: virtual APIC enabled [ 1.557427] AMD-Vi: Lazy IO/TLB flushing enabled [ 1.558382] amd_uncore: AMD NB counters detected [ 1.558574] amd_uncore: AMD LLC counters detected [ 1.559074] Scanning for low memory corruption every 60 seconds [ 1.584689] Initialise system trusted keyrings [ 1.584986] workingset: timestamp_bits=62 max_order=22 bucket_order=0 [ 1.745769] NET: Registered protocol family 38 [ 1.745967] Key type asymmetric registered [ 1.746146] Asymmetric key parser 'x509' registered [ 1.746375] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.746645] io scheduler noop registered (default) [ 1.748772] pcieport 0000:00:01.2: AER enabled with IRQ 28 [ 1.749045] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.749327] ACPI: Power Button [PWRB] [ 1.749535] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.749805] ACPI: Power Button [PWRF] [ 1.750009] Monitor-Mwait will be used to enter C-1 state [ 1.751249] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.773932] 0000:03:00.0: ttyS0 at I/O 0xe010 (irq = 32, base_baud = 115200) is a ST16650V2 [ 1.796489] 0000:03:00.1: ttyS1 at I/O 0xe000 (irq = 25, base_baud = 115200) is a ST16650V2 [ 1.798454] brd: module loaded [ 1.800142] loop: module loaded [ 1.800356] ahci 0000:01:00.1: version 3.0 [ 1.800464] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled [ 1.800743] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 1.801021] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 1.801903] scsi host0: ahci [ 1.802188] scsi host1: ahci [ 1.802448] scsi host2: ahci [ 1.802738] scsi host3: ahci [ 1.803040] scsi host4: ahci [ 1.803300] scsi host5: ahci [ 1.803599] scsi host6: ahci [ 1.803903] scsi host7: ahci [ 1.804124] ata1: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880100 irq 40 [ 1.804399] ata2: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880180 irq 40 [ 1.804668] ata3: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880200 irq 40 [ 1.804937] ata4: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880280 irq 40 [ 1.805207] ata5: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880300 irq 40 [ 1.805476] ata6: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880380 irq 40 [ 1.805746] ata7: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880400 irq 40 [ 1.809446] ata8: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880480 irq 40 [ 1.809972] ahci 0000:0a:00.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.810260] ahci 0000:0a:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs [ 1.810546] ahci 0000:0a:00.0: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented [ 1.811208] scsi host8: ahci [ 1.811468] scsi host9: ahci [ 1.811652] ata9: SATA max UDMA/133 abar m2048@0xfe900000 port 0xfe900100 irq 42 [ 1.811918] ata10: SATA max UDMA/133 abar m2048@0xfe900000 port 0xfe900180 irq 43 [ 1.812107] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.812259] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.055936] igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.056159] igb 0000:06:00.0: eth0: (PCIe:2.5Gb/s:Width x1) e0:d5:5e:a3:6b:35 [ 2.056372] igb 0000:06:00.0: eth0: PBA No: FFFFFF-0FF [ 2.056562] igb 0000:06:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 2.056862] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.057075] ehci-pci: EHCI PCI platform driver [ 2.057273] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.057476] ohci-pci: OHCI PCI platform driver [ 2.057717] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 2.057915] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 2.111173] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000410 [ 2.111938] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.112155] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.112417] usb usb1: Product: xHCI Host Controller [ 2.112603] usb usb1: Manufacturer: Linux 4.16.0-rc7-gf7ceee8ca796 xhci-hcd [ 2.112812] usb usb1: SerialNumber: 0000:01:00.0 [ 2.113356] hub 1-0:1.0: USB hub found [ 2.113551] hub 1-0:1.0: 14 ports detected [ 2.113969] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 2.114165] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 2.114430] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.114671] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.114957] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.115164] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.115441] usb usb2: Product: xHCI Host Controller [ 2.115626] usb usb2: Manufacturer: Linux 4.16.0-rc7-gf7ceee8ca796 xhci-hcd [ 2.115836] usb usb2: SerialNumber: 0000:01:00.0 [ 2.116101] hub 2-0:1.0: USB hub found [ 2.116289] hub 2-0:1.0: 8 ports detected [ 2.116513] usb: port power management may be unreliable [ 2.116874] xhci_hcd 0000:08:00.0: xHCI Host Controller [ 2.117070] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3 [ 2.124307] ata9: SATA link down (SStatus 0 SControl 300) [ 2.126580] ata10: SATA link down (SStatus 0 SControl 300) [ 2.176249] xhci_hcd 0000:08:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010 [ 2.177766] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.177983] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.178245] usb usb3: Product: xHCI Host Controller [ 2.178429] usb usb3: Manufacturer: Linux 4.16.0-rc7-gf7ceee8ca796 xhci-hcd [ 2.178638] usb usb3: SerialNumber: 0000:08:00.0 [ 2.178911] hub 3-0:1.0: USB hub found [ 2.179094] hub 3-0:1.0: 2 ports detected [ 2.179323] xhci_hcd 0000:08:00.0: xHCI Host Controller [ 2.179518] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 4 [ 2.179789] xhci_hcd 0000:08:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.180027] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.180311] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.180518] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.180781] usb usb4: Product: xHCI Host Controller [ 2.180966] usb usb4: Manufacturer: Linux 4.16.0-rc7-gf7ceee8ca796 xhci-hcd [ 2.181176] usb usb4: SerialNumber: 0000:08:00.0 [ 2.181443] hub 4-0:1.0: USB hub found [ 2.181626] hub 4-0:1.0: 2 ports detected [ 2.181911] xhci_hcd 0000:09:00.3: xHCI Host Controller [ 2.182109] xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus number 5 [ 2.182546] xhci_hcd 0000:09:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x00000410 [ 2.183643] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.183855] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.184121] usb usb5: Product: xHCI Host Controller [ 2.184305] usb usb5: Manufacturer: Linux 4.16.0-rc7-gf7ceee8ca796 xhci-hcd [ 2.184514] usb usb5: SerialNumber: 0000:09:00.3 [ 2.184786] hub 5-0:1.0: USB hub found [ 2.184969] hub 5-0:1.0: 4 ports detected [ 2.185401] xhci_hcd 0000:09:00.3: xHCI Host Controller [ 2.185595] xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus number 6 [ 2.185866] xhci_hcd 0000:09:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 2.186101] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.186382] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.186589] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.186851] usb usb6: Product: xHCI Host Controller [ 2.187036] usb usb6: Manufacturer: Linux 4.16.0-rc7-gf7ceee8ca796 xhci-hcd [ 2.187246] usb usb6: SerialNumber: 0000:09:00.3 [ 2.187519] hub 6-0:1.0: USB hub found [ 2.187703] hub 6-0:1.0: 4 ports detected [ 2.188173] xhci_hcd 0000:09:00.4: xHCI Host Controller [ 2.188364] xhci_hcd 0000:09:00.4: new USB bus registered, assigned bus number 7 [ 2.188786] xhci_hcd 0000:09:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x00000410 [ 2.189847] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.190062] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.190323] usb usb7: Product: xHCI Host Controller [ 2.190508] usb usb7: Manufacturer: Linux 4.16.0-rc7-gf7ceee8ca796 xhci-hcd [ 2.190716] usb usb7: SerialNumber: 0000:09:00.4 [ 2.190980] hub 7-0:1.0: USB hub found [ 2.191167] hub 7-0:1.0: 1 port detected [ 2.191390] xhci_hcd 0000:09:00.4: xHCI Host Controller [ 2.191529] xhci_hcd 0000:09:00.4: new USB bus registered, assigned bus number 8 [ 2.191690] xhci_hcd 0000:09:00.4: Host supports USB 3.1 Enhanced SuperSpeed [ 2.191835] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.192021] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.192144] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.192303] usb usb8: Product: xHCI Host Controller [ 2.192415] usb usb8: Manufacturer: Linux 4.16.0-rc7-gf7ceee8ca796 xhci-hcd [ 2.192538] usb usb8: SerialNumber: 0000:09:00.4 [ 2.192733] hub 8-0:1.0: USB hub found [ 2.192846] hub 8-0:1.0: 1 port detected [ 2.193010] i8042: PNP: No PS/2 controller found. [ 2.193164] mousedev: PS/2 mouse device common for all mice [ 2.193332] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 2.193475] rtc_cmos 00:02: RTC can wake from S4 [ 2.193692] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.193882] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.194048] pps_ldisc: PPS line discipline registered [ 2.194250] device-mapper: uevent: version 1.0.3 [ 2.194436] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 2.194817] NET: Registered protocol family 10 [ 2.195202] Segment Routing with IPv6 [ 2.195326] NET: Registered protocol family 17 [ 2.195452] Key type dns_resolver registered [ 2.196459] microcode: CPU0: patch_level=0x08101007 [ 2.196576] microcode: CPU1: patch_level=0x08101007 [ 2.196691] microcode: CPU2: patch_level=0x08101007 [ 2.199576] microcode: CPU3: patch_level=0x08101007 [ 2.199681] microcode: CPU4: patch_level=0x08101007 [ 2.199785] microcode: CPU5: patch_level=0x08101007 [ 2.199890] microcode: CPU6: patch_level=0x08101007 [ 2.199996] microcode: CPU7: patch_level=0x08101007 [ 2.200126] microcode: Microcode Update Driver: v2.2. [ 2.200150] sched_clock: Marking stable (2200123594, 0)->(2281588266, -81464672) [ 2.200511] registered taskstats version 1 [ 2.200614] Loading compiled-in X.509 certificates [ 2.201166] rtc_cmos 00:02: setting system clock to 2018-06-02 13:48:35 UTC (1527947315) [ 2.284028] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.285338] ata1.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 2.285549] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.286975] ata1.00: configured for UDMA/133 [ 2.287288] scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 2.287837] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.288111] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.288314] sd 0:0:0:0: [sda] Write Protect is off [ 2.288500] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.288520] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.292753] sda: sda1 sda2 sda4 [ 2.293205] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.452054] usb 1-4: new high-speed USB device number 2 using xhci_hcd [ 2.588030] tsc: Refined TSC clocksource calibration: 3600.037 MHz [ 2.588258] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e4767be31, max_idle_ns: 440795374465 ns [ 2.588617] clocksource: Switched to clocksource tsc [ 2.764384] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.765979] ata2.00: ATA-8: TOSHIBA HDWD120, MX4OACF0, max UDMA/133 [ 2.766207] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.767609] ata2.00: configured for UDMA/133 [ 2.767943] scsi 1:0:0:0: Direct-Access ATA TOSHIBA HDWD120 ACF0 PQ: 0 ANSI: 5 [ 2.768719] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.768993] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.769203] sd 1:0:0:0: [sdb] Write Protect is off [ 2.769404] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.769434] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.770622] sdb: sdb1 sdb2 sdb4 [ 2.770990] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.859813] usb 1-4: New USB device found, idVendor=046d, idProduct=082c [ 2.860061] usb 1-4: New USB device strings: Mfr=0, Product=2, SerialNumber=1 [ 2.860288] usb 1-4: Product: HD Webcam C615 [ 2.860477] usb 1-4: SerialNumber: F6629A60 [ 2.992341] usb 1-9: new low-speed USB device number 3 using xhci_hcd [ 3.244065] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.245472] ata3.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 3.245701] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.247225] ata3.00: configured for UDMA/133 [ 3.247612] scsi 2:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 3.248261] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.248533] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 3.248732] sd 2:0:0:0: [sdc] Write Protect is off [ 3.248918] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.248926] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.251171] sdc: sdc1 sdc2 sdc4 [ 3.251499] sd 2:0:0:0: [sdc] Attached SCSI disk [ 3.256649] usb 1-9: New USB device found, idVendor=046d, idProduct=c312 [ 3.256868] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.257084] usb 1-9: Product: USB Multimedia Keyboard [ 3.257276] usb 1-9: Manufacturer: LITEON Technology [ 3.388342] usb 1-10: new low-speed USB device number 4 using xhci_hcd [ 3.644695] usb 1-10: New USB device found, idVendor=046d, idProduct=c018 [ 3.644932] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.645215] usb 1-10: Product: USB Optical Mouse [ 3.645408] usb 1-10: Manufacturer: Logitech [ 3.724384] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.728213] ata4.00: ATA-10: WDC WD2003FZEX-00SRLA0, 01.01A01, max UDMA/133 [ 3.728432] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.735615] ata4.00: configured for UDMA/133 [ 3.735941] scsi 3:0:0:0: Direct-Access ATA WDC WD2003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 3.736477] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.736792] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 3.737004] sd 3:0:0:0: [sdd] Write Protect is off [ 3.737201] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.737219] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.741616] sdd: sdd1 sdd2 sdd4 [ 3.742184] sd 3:0:0:0: [sdd] Attached SCSI disk [ 3.776336] usb 1-13: new full-speed USB device number 5 using xhci_hcd [ 4.050742] ata5: SATA link down (SStatus 0 SControl 330) [ 4.117675] usb 1-13: New USB device found, idVendor=04d8, idProduct=f5fe [ 4.117907] usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.118186] usb 1-13: Product: TrueRNG [ 4.118368] usb 1-13: Manufacturer: ubld.it [ 4.528359] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.531369] ata6.00: ATAPI: PLEXTOR DVDR PX-891SA, 1.04, max UDMA/100 [ 4.532401] ata6.00: configured for UDMA/100 [ 4.539920] scsi 5:0:0:0: CD-ROM PLEXTOR DVDR PX-891SA 1.04 PQ: 0 ANSI: 5 [ 5.612364] ata7: failed to resume link (SControl 0) [ 5.612589] ata7: SATA link down (SStatus 0 SControl 0) [ 5.928425] ata8: SATA link down (SStatus 0 SControl 330) [ 5.929750] Freeing unused kernel memory: 944K [ 5.929943] Write protecting the kernel read-only data: 16384k [ 5.930514] Freeing unused kernel memory: 2020K [ 5.933650] Freeing unused kernel memory: 1796K [ 5.991407] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 5.991851] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 6.010586] i2c /dev entries driver [ 6.245625] usbcore: registered new interface driver usbhid [ 6.245874] usbhid: USB HID core driver [ 6.276808] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-9/1-9:1.0/0003:046D:C312.0001/input/input3 [ 6.292826] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.293004] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 6.293223] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 6.336024] hid-generic 0003:046D:C312.0001: input: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:01:00.0-9/input0 [ 6.336468] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-10/1-10:1.0/0003:046D:C018.0002/input/input4 [ 6.336859] hid-generic 0003:046D:C018.0002: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:01:00.0-10/input0 [ 6.396980] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.471096] md/raid1:md0: active with 4 out of 4 mirrors [ 6.471335] md0: detected capacity change from 0 to 536805376 [ 6.473179] md/raid10:md1: not clean -- starting background reconstruction [ 6.473409] md/raid10:md1: active with 3 out of 4 devices [ 6.473636] md1: detected capacity change from 0 to 3997621551104 [ 6.473908] md: recovery of RAID array md1 [ 6.502564] random: crng init done [ 9.408722] igb 0000:06:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 9.409380] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 25.419306] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 30.643200] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 40.897830] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 40.898325] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 43.269133] systemd[1]: /usr/lib/systemd/system/rsyslog.service:21: Unknown lvalue 'LimitNOFILE' in section 'Install' [ 46.924186] EXT4-fs (dm-2): re-mounted. Opts: (null) [ 46.992728] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 47.192312] RPC: Registered named UNIX socket transport module. [ 47.192534] RPC: Registered udp transport module. [ 47.192732] RPC: Registered tcp transport module. [ 47.192926] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 47.454692] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 51.817925] acpi_cpufreq: overriding BIOS provided _PSD data [ 51.819443] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 51.819732] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 52.657184] snd_hda_codec_generic hdaudioC0D0: ignore pin 0x7, too many assigned pins [ 52.657507] snd_hda_codec_generic hdaudioC0D0: ignore pin 0x9, too many assigned pins [ 52.657823] snd_hda_codec_generic hdaudioC0D0: ignore pin 0xb, too many assigned pins [ 52.659886] snd_hda_codec_generic hdaudioC0D0: ignore pin 0xd, too many assigned pins [ 52.660192] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line [ 52.660518] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 52.660812] snd_hda_codec_generic hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 52.661099] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0 [ 52.661318] snd_hda_codec_generic hdaudioC0D0: dig-out=0x3/0x5 [ 52.661533] snd_hda_codec_generic hdaudioC0D0: inputs: [ 52.662988] input: HD-Audio Generic HDMI as /devices/pci0000:00/0000:00:08.1/0000:09:00.1/sound/card0/input5 [ 52.663403] input: HD-Audio Generic HDMI as /devices/pci0000:00/0000:00:08.1/0000:09:00.1/sound/card0/input6 [ 52.726201] [drm] amdgpu kernel modesetting enabled. [ 52.726565] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1458:0xD000 0xC6). [ 52.726897] [drm] register mmio base: 0xFE400000 [ 52.727086] [drm] register mmio size: 524288 [ 52.727270] [drm] probing gen 2 caps for device 1022:15db = 700d03/e [ 52.727473] [drm] probing mlw for device 1022:15db = 700d03 [ 52.727667] [drm] add ip block number 0 [ 52.727856] [drm] add ip block number 1 [ 52.728045] [drm] add ip block number 2 [ 52.728231] [drm] add ip block number 3 [ 52.728412] [drm] add ip block number 4 [ 52.728598] [drm] add ip block number 5 [ 52.728777] [drm] add ip block number 6 [ 52.728961] [drm] add ip block number 7 [ 52.729146] [drm] add ip block number 8 [ 52.878977] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 52.879338] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 52.879656] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 52.879938] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 52.880161] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 [ 52.880365] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 52.880559] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 52.880763] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 52.880965] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 52.900608] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input7 [ 52.900863] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input8 [ 52.901101] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input9 [ 52.901308] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input10 [ 52.901544] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input11 [ 52.901790] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input12 [ 52.902009] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input13 [ 52.903583] cdc_acm 1-13:1.0: ttyACM0: USB ACM device [ 52.905451] usbcore: registered new interface driver cdc_acm [ 52.905593] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 53.300092] Linux video capture interface: v2.00 [ 53.338293] [drm] VCN decode is enabled in VM mode [ 53.338494] [drm] VCN encode is enabled in VM mode [ 53.362067] [drm] BIOS signature incorrect 5b 7 [ 53.362192] ATOM BIOS: 113-RAVEN-104 [ 53.362305] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 53.362468] amdgpu 0000:09:00.0: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used) [ 53.362623] amdgpu 0000:09:00.0: GTT: 1024M 0x000000F500000000 - 0x000000F53FFFFFFF [ 53.362773] [drm] Detected VRAM RAM=1024M, BAR=1024M [ 53.362875] [drm] RAM width 128bits DDR4 [ 53.363034] [TTM] Zone kernel: Available graphics memory: 7704896 kiB [ 53.363143] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 53.363253] [TTM] Initializing pool allocator [ 53.363354] [TTM] Initializing DMA pool allocator [ 53.363493] [drm] amdgpu: 1024M of VRAM memory ready [ 53.363599] [drm] amdgpu: 3072M of GTT memory ready. [ 53.363713] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 53.363984] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000). [ 53.467074] usbcore: registered new interface driver snd-usb-audio [ 53.723630] uvcvideo: Found UVC 1.00 device HD Webcam C615 (046d:082c) [ 53.746048] input: HD Webcam C615 as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-4/1-4:1.2/input/input14 [ 53.746388] usbcore: registered new interface driver uvcvideo [ 53.746599] USB Video Class driver (1.1.1) [ 53.787162] [drm] use_doorbell being set to: [true] [ 53.804716] [drm] Found VCN firmware Version: 1.73 Family ID: 18 [ 53.960474] amdgpu: [powerplay] dpm has been enabled [ 53.960802] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:1! type 0 expected 3 [ 53.961037] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3 [ 53.961266] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:3! type 0 expected 3 [ 53.982311] [drm] Display Core initialized with v3.1.47! [ 54.007435] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 54.007528] [drm] Driver supports precise vblank timestamp query. [ 54.030804] [drm] VCN decode and encode initialized successfully. [ 54.034663] [drm] fb mappable at 0x3E0100000 [ 54.034747] [drm] vram apper at 0x3DF000000 [ 54.034830] [drm] size 33177600 [ 54.034907] [drm] fb depth is 24 [ 54.034984] [drm] pitch is 15360 [ 54.035102] fbcon: amdgpudrmfb (fb0) is primary device [ 54.156255] Console: switching to colour frame buffer device 480x135 [ 54.183277] amdgpu 0000:09:00.0: fb0: amdgpudrmfb frame buffer device [ 54.204150] amdgpu 0000:09:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0 [ 54.204153] amdgpu 0000:09:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0 [ 54.204156] amdgpu 0000:09:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0 [ 54.204158] amdgpu 0000:09:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0 [ 54.204161] amdgpu 0000:09:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0 [ 54.204163] amdgpu 0000:09:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0 [ 54.204166] amdgpu 0000:09:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0 [ 54.204168] amdgpu 0000:09:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0 [ 54.204171] amdgpu 0000:09:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0 [ 54.204173] amdgpu 0000:09:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0 [ 54.204176] amdgpu 0000:09:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1 [ 54.204179] amdgpu 0000:09:00.0: ring 11(vcn_dec) uses VM inv eng 5 on hub 1 [ 54.204181] amdgpu 0000:09:00.0: ring 12(vcn_enc0) uses VM inv eng 6 on hub 1 [ 54.204184] amdgpu 0000:09:00.0: ring 13(vcn_enc1) uses VM inv eng 7 on hub 1 [ 54.354546] [drm] Initialized amdgpu 3.26.0 20150101 for 0000:09:00.0 on minor 0 [ 61.391414] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 61.555614] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) [ 62.257952] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) [ 64.696965] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 64.895979] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 65.579896] Adding 1023996k swap on /dev/mapper/swapa. Priority:-2 extents:1 across:1023996k [ 65.581720] Adding 1023996k swap on /dev/mapper/swapc. Priority:-3 extents:1 across:1023996k [ 65.729411] Adding 1023996k swap on /dev/mapper/swapb. Priority:-4 extents:1 across:1023996k [ 65.805984] Adding 1023996k swap on /dev/mapper/swapd. Priority:-5 extents:1 across:1023996k [ 65.969557] systemd-journald[1070]: File /var/log/journal/6bc32011e81922c063bab4ec493561d1/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 66.741342] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) [ 85.974344] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 87.772429] pps pps0: new PPS source serial0 [ 87.772433] pps pps0: source "/dev/ttyS0" added [ 88.419991] it87: Found IT8733E chip at 0xa60, revision 3 [ 88.422875] it87: Beeping is supported [ 97.033514] igb 0000:06:00.0: changing MTU from 1500 to 7200 [ 100.956611] igb 0000:06:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 101.251791] NFSD: starting 90-second grace period (net f0000099) [ 202.547494] fuse init (API version 7.26) [ 363.118180] it87: loading out-of-tree module taints kernel. [ 363.118659] it87: it87 driver version v1.0-42-g7182608 [ 363.118739] it87: Found IT8686E chip at 0xa40, revision 2 [ 363.118781] it87: Beeping is supported [ 363.120337] it87: Found IT8792E/IT8795E chip at 0xa60, revision 3 [ 363.120388] it87: Beeping is supported [ 5676.016693] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 5676.016711] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 12 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout) [ 5676.016717] ata6.00: status: { DRDY } [ 5676.016723] ata6: hard resetting link [ 5676.492566] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5676.495875] ata6.00: configured for UDMA/100 [ 5676.506814] ata6: EH complete [ 7182.644607] md: md1: recovery done. [ 7183.074354] md: resync of RAID array md1 [ 8236.009886] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 8236.009898] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 28 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [ 8236.009903] ata6.00: status: { DRDY } [ 8236.009906] ata6: hard resetting link [ 8236.485894] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8236.489187] ata6.00: configured for UDMA/100 [ 8236.500140] ata6: EH complete [ 8436.709063] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 8436.709082] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 20 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [ 8436.709087] ata6.00: status: { DRDY } [ 8436.709093] ata6: hard resetting link [ 8437.185051] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8437.188300] ata6.00: configured for UDMA/100 [ 8437.199248] ata6: EH complete [ 9600.028282] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. [ 9636.823927] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 9636.823944] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 12 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout) [ 9636.823949] ata6.00: status: { DRDY } [ 9636.823954] ata6: hard resetting link [ 9637.351910] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9637.374081] ata6.00: configured for UDMA/100 [ 9637.385007] ata6: EH complete [10626.015636] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [10626.015653] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 24 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [10626.015658] ata6.00: status: { DRDY } [10626.015664] ata6: hard resetting link [10626.491709] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [10626.495012] ata6.00: configured for UDMA/100 [10626.506153] ata6: EH complete [10912.722398] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [10912.722415] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 28 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [10912.722421] ata6.00: status: { DRDY } [10912.722426] ata6: hard resetting link [10913.198402] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [10913.201715] ata6.00: configured for UDMA/100 [10913.212867] ata6: EH complete [14298.055475] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [14298.055494] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 19 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [14298.055499] ata6.00: status: { DRDY } [14298.055504] ata6: hard resetting link [14298.531466] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [14298.534694] ata6.00: configured for UDMA/100 [14298.545825] ata6: EH complete [15680.437651] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [15680.437668] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 9 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [15680.437674] ata6.00: status: { DRDY } [15680.437680] ata6: hard resetting link [15680.913652] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [15680.916982] ata6.00: configured for UDMA/100 [15680.928150] ata6: EH complete [15784.893182] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [15784.893199] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 16 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [15784.893204] ata6.00: status: { DRDY } [15784.893210] ata6: hard resetting link [15785.369184] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [15785.372486] ata6.00: configured for UDMA/100 [15785.383415] ata6: EH complete [16427.970492] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [16427.970504] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 11 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [16427.970508] ata6.00: status: { DRDY } [16427.970512] ata6: hard resetting link [16428.446520] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [16428.449804] ata6.00: configured for UDMA/100 [16428.460919] ata6: EH complete [20538.277576] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [20538.277592] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 21 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [20538.277598] ata6.00: status: { DRDY } [20538.277603] ata6: hard resetting link [20538.753571] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [20538.756861] ata6.00: configured for UDMA/100 [20538.768041] ata6: EH complete [22221.730868] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [22221.730885] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 5 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [22221.730891] ata6.00: status: { DRDY } [22221.730897] ata6: hard resetting link [22222.206602] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [22222.209905] ata6.00: configured for UDMA/100 [22222.220859] ata6: EH complete [22822.142772] md: md1: resync done. [33088.381502] md: data-check of RAID array md1 [33094.640002] md: delaying data-check of md0 until md1 has finished (they share one or more physical units) [35945.328538] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [35945.328553] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 9 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [35945.328558] ata6.00: status: { DRDY } [35945.328563] ata6: hard resetting link [35945.804534] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [35945.807819] ata6.00: configured for UDMA/100 [35945.818751] ata6: EH complete [36146.027775] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [36146.027792] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 2 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [36146.027798] ata6.00: status: { DRDY } [36146.027803] ata6: hard resetting link [36146.503802] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [36146.507322] ata6.00: configured for UDMA/100 [36146.518308] ata6: EH complete [36305.771160] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [36305.771175] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 6 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [36305.771180] ata6.00: status: { DRDY } [36305.771185] ata6: hard resetting link [36306.247239] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [36306.250561] ata6.00: configured for UDMA/100 [36306.261501] ata6: EH complete [36836.201133] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [36836.201150] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 7 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [36836.201156] ata6.00: status: { DRDY } [36836.201161] ata6: hard resetting link [36836.677127] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [36836.680371] ata6.00: configured for UDMA/100 [36836.691501] ata6: EH complete [37643.110036] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [37643.110053] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 21 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [37643.110058] ata6.00: status: { DRDY } [37643.110064] ata6: hard resetting link [37643.586042] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [37643.589550] ata6.00: configured for UDMA/100 [37643.600511] ata6: EH complete [37741.413660] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [37741.413672] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 25 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [37741.413676] ata6.00: status: { DRDY } [37741.413679] ata6: hard resetting link [37741.889667] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [37741.892967] ata6.00: configured for UDMA/100 [37741.903912] ata6: EH complete [39160.672212] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [39160.672226] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 2 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [39160.672231] ata6.00: status: { DRDY } [39160.672236] ata6: hard resetting link [39161.148500] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [39161.151882] ata6.00: configured for UDMA/100 [39161.162838] ata6: EH complete [39635.810368] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [39635.810384] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 7 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [39635.810390] ata6.00: status: { DRDY } [39635.810395] ata6: hard resetting link [39636.286712] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [39636.290008] ata6.00: configured for UDMA/100 [39636.301036] ata6: EH complete [41431.891428] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [41431.891445] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 16 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [41431.891451] ata6.00: status: { DRDY } [41431.891456] ata6: hard resetting link [41432.363438] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [41432.366827] ata6.00: configured for UDMA/100 [41432.377770] ata6: EH complete [42373.987697] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [42373.987714] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 5 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [42373.987720] ata6.00: status: { DRDY } [42373.987725] ata6: hard resetting link [42374.467686] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [42374.470969] ata6.00: configured for UDMA/100 [42374.481921] ata6: EH complete [42609.490806] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [42609.490820] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 15 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout) [42609.490823] ata6.00: status: { DRDY } [42609.490827] ata6: hard resetting link [42609.966772] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [42609.970068] ata6.00: configured for UDMA/100 [42609.981028] ata6: EH complete [42660.690561] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [42660.690578] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 27 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [42660.690583] ata6.00: status: { DRDY } [42660.690587] ata6: hard resetting link [42661.166612] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [42661.171416] ata6.00: configured for UDMA/100 [42661.182430] ata6: EH complete [43850.578075] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [43850.578092] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 14 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [43850.578098] ata6.00: status: { DRDY } [43850.578104] ata6: hard resetting link [43851.053848] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [43851.057139] ata6.00: configured for UDMA/100 [43851.068083] ata6: EH complete [45413.203685] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [45413.203715] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [45413.203719] ata6.00: status: { DRDY } [45413.203723] ata6: hard resetting link [45413.679821] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [45413.683136] ata6.00: configured for UDMA/100 [45413.694097] ata6: EH complete [45917.545112] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:3 pasid:32770) [45917.545117] amdgpu 0000:09:00.0: at page 0x000000012021c000 from 27 [45917.545120] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00301031 [45917.545125] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:3 pasid:32770) [45917.545127] amdgpu 0000:09:00.0: at page 0x0000000120218000 from 27 [45917.545130] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00301031 [45917.545134] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:3 pasid:32770) [45917.545137] amdgpu 0000:09:00.0: at page 0x000000012022b000 from 27 [45917.545139] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00301031 [45917.545143] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:3 pasid:32770) [45917.545145] amdgpu 0000:09:00.0: at page 0x0000000120227000 from 27 [45917.545147] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00301031 [45917.545152] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:3 pasid:32770) [45917.545154] amdgpu 0000:09:00.0: at page 0x0000000120223000 from 27 [45917.545156] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00301031 [45917.545160] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:3 pasid:32770) [45917.545162] amdgpu 0000:09:00.0: at page 0x000000012021f000 from 27 [45917.545164] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00301031 [45917.545169] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:3 pasid:32770) [45917.545171] amdgpu 0000:09:00.0: at page 0x0000000120232000 from 27 [45917.545173] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 [45917.545177] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:3 pasid:32770) [45917.545179] amdgpu 0000:09:00.0: at page 0x000000012022e000 from 27 [45917.545181] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 [45917.545186] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:3 pasid:32770) [45917.545188] amdgpu 0000:09:00.0: at page 0x000000012020d000 from 27 [45917.545190] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 [45917.545195] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:3 pasid:32770) [45917.545197] amdgpu 0000:09:00.0: at page 0x0000000120209000 from 27 [45917.545199] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 [45927.713710] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring gfx timeout, last signaled seq=721839, last emitted seq=721841 [45927.713718] [drm] GPU recovery disabled.