~~~~ *-display description: VGA compatible controller product: Advanced Micro Devices, Inc. [AMD/ATI] vendor: Advanced Micro Devices, Inc. [AMD/ATI] physical id: 0 bus info: pci@0000:38:00.0 version: c8 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi msix vga_controller bus_master cap_list rom configuration: driver=amdgpu latency=0 resources: irq:56 memory:e0000000-efffffff memory:f0000000-f01fffff ioport:e000(size=256) memory:fe600000-fe67ffff memory:c0000-dffff ~~~~ [ 0.000000] Linux version 4.16.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-19)) #1 SMP Debian 4.16.12-1 (2018-05-27) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.16.0-2-amd64 root=UUID=364b5ebd-644e-415b-ab83-938265caaae5 ro quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000400a000-0x0000000009d7ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009d80000-0x0000000009ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000cd1e1fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cd1e2000-0x00000000cd2d1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cd2d2000-0x00000000cd3c4fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cd3c5000-0x00000000cd78cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cd78d000-0x00000000ce662fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ce663000-0x00000000ceffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd800000-0x00000000fdffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f33ffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Micro-Star International Co., Ltd. MS-7A34/B350 PC MATE (MS-7A34), BIOS A.E0 05/02/2018 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x41f340 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000420000000 aka 16896M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcf000 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x39fc2d000, 0x39fc2dfff] PGTABLE [ 0.000000] BRK [0x39fc2e000, 0x39fc2efff] PGTABLE [ 0.000000] BRK [0x39fc2f000, 0x39fc2ffff] PGTABLE [ 0.000000] BRK [0x39fc30000, 0x39fc30fff] PGTABLE [ 0.000000] BRK [0x39fc31000, 0x39fc31fff] PGTABLE [ 0.000000] BRK [0x39fc32000, 0x39fc32fff] PGTABLE [ 0.000000] BRK [0x39fc33000, 0x39fc33fff] PGTABLE [ 0.000000] BRK [0x39fc34000, 0x39fc34fff] PGTABLE [ 0.000000] BRK [0x39fc35000, 0x39fc35fff] PGTABLE [ 0.000000] BRK [0x39fc36000, 0x39fc36fff] PGTABLE [ 0.000000] BRK [0x39fc37000, 0x39fc37fff] PGTABLE [ 0.000000] BRK [0x39fc38000, 0x39fc38fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3525f000-0x36926fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000CD3C5098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000CD3CC7D0 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180105/tbfadt-658) [ 0.000000] ACPI: DSDT 0x00000000CD3C51D8 0075F2 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000CD776E00 000040 [ 0.000000] ACPI: APIC 0x00000000CD3CC8E8 0000DE (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000CD3CC9C8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000CD3CCA10 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000CD3CCAB0 005367 (v02 AMD AmdTable 00000002 MSFT 02000002) [ 0.000000] ACPI: CRAT 0x00000000CD3D1E18 000810 (v01 AMD AMD CRAT 00000001 AMD 00000001) [ 0.000000] ACPI: CDIT 0x00000000CD3D2628 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x00000000CD3D2658 002D89 (v01 AMD AMD AOD 00000001 INTL 20120913) [ 0.000000] ACPI: MCFG 0x00000000CD3D53E8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 0x00000000CD3D5428 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: UEFI 0x00000000CD3D5460 000042 (v01 00000000 00000000) [ 0.000000] ACPI: IVRS 0x00000000CD3D54A8 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000) [ 0.000000] ACPI: SSDT 0x00000000CD3D5578 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000CD3D5670 000E96 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000CD3D6508 000850 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000CD3D6D58 001A41 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.000000] ACPI: WSMT 0x00000000CD3D87A0 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f33ffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x41f33b000-0x41f33ffff] [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: Using PIT calibration value [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000041f33ffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000003ffffff] [ 0.000000] node 0: [mem 0x000000000400a000-0x0000000009d7ffff] [ 0.000000] node 0: [mem 0x000000000a000000-0x000000000affffff] [ 0.000000] node 0: [mem 0x000000000b020000-0x00000000cd1e1fff] [ 0.000000] node 0: [mem 0x00000000cd2d2000-0x00000000cd3c4fff] [ 0.000000] node 0: [mem 0x00000000ce663000-0x00000000ceffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000041f33ffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f33ffff] [ 0.000000] On node 0 totalpages: 4115620 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13096 pages used for memmap [ 0.000000] DMA32 zone: 838088 pages, LIFO batch:31 [ 0.000000] Normal zone: 51149 pages used for memmap [ 0.000000] Normal zone: 3273536 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 100 pages [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x04000000-0x04009fff] [ 0.000000] PM: Registered nosave memory: [mem 0x09d80000-0x09ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcd1e2000-0xcd2d1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcd3c5000-0xcd78cfff] [ 0.000000] PM: Registered nosave memory: [mem 0xcd78d000-0xce662fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfd7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfd800000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x478 with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] percpu: Embedded 44 pages/cpu @ (ptrval) s142296 r8192 d29736 u262144 [ 0.000000] pcpu-alloc: s142296 r8192 d29736 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4051290 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.16.0-2-amd64 root=UUID=364b5ebd-644e-415b-ab83-938265caaae5 ro quiet [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16089392K/16462480K available (10252K kernel code, 1182K rwdata, 3128K rodata, 1528K init, 688K bss, 373088K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] ftrace: allocating 29921 entries in 117 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.000000] NR_IRQS: 33024, nr_irqs: 1096, preallocated irqs: 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180105 [ 0.000000] ACPI BIOS Error (bug): Failure creating [\_SB.SMIC], AE_ALREADY_EXISTS (20180105/dswload-380) [ 0.000000] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180105/psobject-252) [ 0.000000] ACPI Error: AE_ALREADY_EXISTS, (SSDT: AMD PT) while loading table (20180105/tbxfload-228) [ 0.000000] ACPI Error: 1 table load failures, 6 successful (20180105/tbxfload-246) [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.004000] Switched APIC routing to physical flat. [ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.024000] tsc: Fast TSC calibration failed [ 0.028000] tsc: PIT calibration matches HPET. 1 loops [ 0.028000] tsc: Detected 3500.078 MHz processor [ 0.028000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x32739acdc0f, max_idle_ns: 440795226328 ns [ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.15 BogoMIPS (lpj=14000312) [ 0.028000] pid_max: default: 32768 minimum: 301 [ 0.028000] Security Framework initialized [ 0.028000] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.028000] AppArmor: AppArmor initialized [ 0.028000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.028000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.028000] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.028000] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.032156] CPU: Physical Processor ID: 0 [ 0.032157] CPU: Processor Core ID: 0 [ 0.032263] mce: CPU supports 23 MCE banks [ 0.032277] LVT offset 1 assigned for vector 0xf9 [ 0.032318] LVT offset 2 assigned for vector 0xf4 [ 0.032327] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.032328] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0 [ 0.032329] Spectre V2 : Mitigation: Full AMD retpoline [ 0.032329] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.032330] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.032781] Freeing SMP alternatives memory: 28K [ 0.040000] smpboot: CPU0: AMD Ryzen 3 2200G with Radeon Vega Graphics (family: 0x17, model: 0x11, stepping: 0x0) [ 0.040000] Performance Events: Fam17h core perfctr, AMD PMU driver. [ 0.040000] ... version: 0 [ 0.040000] ... bit width: 48 [ 0.040000] ... generic registers: 6 [ 0.040000] ... value mask: 0000ffffffffffff [ 0.040000] ... max period: 00007fffffffffff [ 0.040000] ... fixed-purpose events: 0 [ 0.040000] ... event mask: 000000000000003f [ 0.040000] Hierarchical SRCU implementation. [ 0.040000] smp: Bringing up secondary CPUs ... [ 0.040000] x86: Booting SMP configuration: [ 0.040000] .... node #0, CPUs: #1 [ 0.040015] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.040136] #2 #3 [ 0.046175] smp: Brought up 1 node, 4 CPUs [ 0.046175] smpboot: Max logical packages: 4 [ 0.046175] smpboot: Total of 4 processors activated (28000.62 BogoMIPS) [ 0.046175] devtmpfs: initialized [ 0.046175] x86/mm: Memory block size: 128MB [ 0.049049] PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes) [ 0.049049] PM: Registering ACPI NVS region [mem 0xcd3c5000-0xcd78cfff] (3964928 bytes) [ 0.049049] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.049049] futex hash table entries: 4096 (order: 6, 262144 bytes) [ 0.049049] pinctrl core: initialized pinctrl subsystem [ 0.049599] NET: Registered protocol family 16 [ 0.049673] audit: initializing netlink subsys (disabled) [ 0.049676] audit: type=2000 audit(1528568425.048:1): state=initialized audit_enabled=0 res=1 [ 0.049676] cpuidle: using governor ladder [ 0.049676] cpuidle: using governor menu [ 0.049676] ACPI: bus type PCI registered [ 0.049676] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.049676] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.049676] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.049676] PCI: Using configuration type 1 for base access [ 0.049676] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.049676] mtrr: probably your BIOS does not setup all CPUs. [ 0.049676] mtrr: corrected configuration. [ 0.052246] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.052246] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.052246] ACPI: Added _OSI(Module Device) [ 0.052246] ACPI: Added _OSI(Processor Device) [ 0.052246] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.052247] ACPI: Added _OSI(Processor Aggregator Device) [ 0.052462] ACPI BIOS Error (bug): Failure looking up [\PTOS], AE_NOT_FOUND (20180105/psargs-364) [ 0.052662] ACPI Error: Method parse/execution failed \, AE_NOT_FOUND (20180105/psparse-550) [ 0.052847] ACPI: Executed 2 blocks of module-level executable AML code [ 0.056223] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.057887] ACPI: Interpreter enabled [ 0.057898] ACPI: (supports S0 S3 S4 S5) [ 0.057899] ACPI: Using IOAPIC for interrupt routing [ 0.058121] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.058353] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.060218] ACPI: Power Resource [P0ST] (on) [ 0.060248] ACPI: Power Resource [P3ST] (on) [ 0.064601] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.064604] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.064743] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.064750] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.064973] PCI host bridge to bus 0000:00 [ 0.064976] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.064977] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.064978] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.064978] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.064979] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.064980] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.064981] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window] [ 0.064982] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ 0.064983] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.064992] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000 [ 0.065119] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600 [ 0.065259] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 [ 0.065361] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400 [ 0.065462] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold [ 0.065569] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 [ 0.065672] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400 [ 0.065724] pci 0000:00:08.1: enabling Extended Tags [ 0.065779] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.065859] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400 [ 0.065909] pci 0000:00:08.2: enabling Extended Tags [ 0.065958] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold [ 0.066068] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.066237] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.066436] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000 [ 0.066481] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000 [ 0.066525] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000 [ 0.066576] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000 [ 0.066617] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000 [ 0.066659] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000 [ 0.066707] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000 [ 0.066751] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000 [ 0.066881] pci 0000:15:00.0: [1022:43bb] type 00 class 0x0c0330 [ 0.066911] pci 0000:15:00.0: reg 0x10: [mem 0xfe8a0000-0xfe8a7fff 64bit] [ 0.067012] pci 0000:15:00.0: PME# supported from D3hot D3cold [ 0.067097] pci 0000:15:00.1: [1022:43b7] type 00 class 0x010601 [ 0.067158] pci 0000:15:00.1: reg 0x24: [mem 0xfe880000-0xfe89ffff] [ 0.067168] pci 0000:15:00.1: reg 0x30: [mem 0xfe800000-0xfe87ffff pref] [ 0.067218] pci 0000:15:00.1: PME# supported from D3hot D3cold [ 0.067284] pci 0000:15:00.2: [1022:43b2] type 01 class 0x060400 [ 0.067382] pci 0000:15:00.2: PME# supported from D3hot D3cold [ 0.080027] pci 0000:00:01.2: PCI bridge to [bus 15-1f] [ 0.080033] pci 0000:00:01.2: bridge window [io 0xf000-0xffff] [ 0.080036] pci 0000:00:01.2: bridge window [mem 0xfe700000-0xfe8fffff] [ 0.080147] pci 0000:16:00.0: [1022:43b4] type 01 class 0x060400 [ 0.080263] pci 0000:16:00.0: PME# supported from D3hot D3cold [ 0.080351] pci 0000:16:01.0: [1022:43b4] type 01 class 0x060400 [ 0.080466] pci 0000:16:01.0: PME# supported from D3hot D3cold [ 0.080563] pci 0000:16:04.0: [1022:43b4] type 01 class 0x060400 [ 0.080678] pci 0000:16:04.0: PME# supported from D3hot D3cold [ 0.080794] pci 0000:15:00.2: PCI bridge to [bus 16-1f] [ 0.080800] pci 0000:15:00.2: bridge window [io 0xf000-0xffff] [ 0.080803] pci 0000:15:00.2: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.080880] pci 0000:17:00.0: [1b21:1080] type 01 class 0x060400 [ 0.081087] pci 0000:17:00.0: supports D1 D2 [ 0.081088] pci 0000:17:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.092024] pci 0000:16:00.0: PCI bridge to [bus 17-18] [ 0.092191] pci 0000:17:00.0: PCI bridge to [bus 18] [ 0.092298] pci 0000:1e:00.0: [10ec:8168] type 00 class 0x020000 [ 0.092346] pci 0000:1e:00.0: reg 0x10: [io 0xf000-0xf0ff] [ 0.092388] pci 0000:1e:00.0: reg 0x18: [mem 0xfe704000-0xfe704fff 64bit] [ 0.092414] pci 0000:1e:00.0: reg 0x20: [mem 0xfe700000-0xfe703fff 64bit] [ 0.092564] pci 0000:1e:00.0: supports D1 D2 [ 0.092565] pci 0000:1e:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.104054] pci 0000:16:01.0: PCI bridge to [bus 1e] [ 0.104063] pci 0000:16:01.0: bridge window [io 0xf000-0xffff] [ 0.104069] pci 0000:16:01.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.104157] pci 0000:16:04.0: PCI bridge to [bus 1f] [ 0.104349] pci 0000:38:00.0: [1002:15dd] type 00 class 0x030000 [ 0.104400] pci 0000:38:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.104421] pci 0000:38:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.104434] pci 0000:38:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.104448] pci 0000:38:00.0: reg 0x24: [mem 0xfe600000-0xfe67ffff] [ 0.104471] pci 0000:38:00.0: enabling Extended Tags [ 0.104588] pci 0000:38:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.104746] pci 0000:38:00.1: [1002:15de] type 00 class 0x040300 [ 0.104778] pci 0000:38:00.1: reg 0x10: [mem 0xfe688000-0xfe68bfff] [ 0.104856] pci 0000:38:00.1: enabling Extended Tags [ 0.104933] pci 0000:38:00.1: PME# supported from D1 D2 D3hot D3cold [ 0.105030] pci 0000:38:00.2: [1022:15df] type 00 class 0x108000 [ 0.105082] pci 0000:38:00.2: reg 0x18: [mem 0xfe500000-0xfe5fffff] [ 0.105116] pci 0000:38:00.2: reg 0x24: [mem 0xfe68c000-0xfe68dfff] [ 0.105136] pci 0000:38:00.2: enabling Extended Tags [ 0.105291] pci 0000:38:00.3: [1022:15e0] type 00 class 0x0c0330 [ 0.105326] pci 0000:38:00.3: reg 0x10: [mem 0xfe400000-0xfe4fffff 64bit] [ 0.105388] pci 0000:38:00.3: enabling Extended Tags [ 0.105465] pci 0000:38:00.3: PME# supported from D0 D3hot D3cold [ 0.105539] pci 0000:38:00.4: [1022:15e1] type 00 class 0x0c0330 [ 0.105575] pci 0000:38:00.4: reg 0x10: [mem 0xfe300000-0xfe3fffff 64bit] [ 0.105636] pci 0000:38:00.4: enabling Extended Tags [ 0.105713] pci 0000:38:00.4: PME# supported from D0 D3hot D3cold [ 0.105796] pci 0000:38:00.6: [1022:15e3] type 00 class 0x040300 [ 0.105825] pci 0000:38:00.6: reg 0x10: [mem 0xfe680000-0xfe687fff] [ 0.105898] pci 0000:38:00.6: enabling Extended Tags [ 0.105967] pci 0000:38:00.6: PME# supported from D0 D3hot D3cold [ 0.106124] pci 0000:00:08.1: PCI bridge to [bus 38] [ 0.106130] pci 0000:00:08.1: bridge window [io 0xe000-0xefff] [ 0.106133] pci 0000:00:08.1: bridge window [mem 0xfe300000-0xfe6fffff] [ 0.106139] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.106226] pci 0000:39:00.0: [1022:7901] type 00 class 0x010601 [ 0.106309] pci 0000:39:00.0: reg 0x24: [mem 0xfe900000-0xfe9007ff] [ 0.106329] pci 0000:39:00.0: enabling Extended Tags [ 0.106404] pci 0000:39:00.0: PME# supported from D3hot D3cold [ 0.106511] pci 0000:00:08.2: PCI bridge to [bus 39] [ 0.106519] pci 0000:00:08.2: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.107000] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 [ 0.107049] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 [ 0.107089] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 [ 0.107143] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 [ 0.107189] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ 0.107227] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ 0.107265] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 0.107302] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 0.108019] pci 0000:38:00.0: vgaarb: setting as boot VGA device [ 0.108021] pci 0000:38:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.108022] pci 0000:38:00.0: vgaarb: bridge control possible [ 0.108023] vgaarb: loaded [ 0.108124] pps_core: LinuxPPS API ver. 1 registered [ 0.108124] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.108126] PTP clock support registered [ 0.108131] EDAC MC: Ver: 3.0.0 [ 0.108131] PCI: Using ACPI for IRQ routing [ 0.113632] PCI: pci_cache_line_size set to 64 bytes [ 0.113718] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 0.113719] e820: reserve RAM buffer [mem 0x09d80000-0x0bffffff] [ 0.113720] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff] [ 0.113721] e820: reserve RAM buffer [mem 0xcd1e2000-0xcfffffff] [ 0.113722] e820: reserve RAM buffer [mem 0xcd3c5000-0xcfffffff] [ 0.113723] e820: reserve RAM buffer [mem 0xcf000000-0xcfffffff] [ 0.113723] e820: reserve RAM buffer [mem 0x41f340000-0x41fffffff] [ 0.113827] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.113827] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.116051] clocksource: Switched to clocksource tsc-early [ 0.125917] VFS: Disk quotas dquot_6.6.0 [ 0.125957] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.126088] AppArmor: AppArmor Filesystem Enabled [ 0.126100] pnp: PnP ACPI init [ 0.126222] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.126226] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.126285] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved [ 0.126287] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.126368] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.126520] system 00:03: [io 0x0a00-0x0a0f] has been reserved [ 0.126521] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.126522] system 00:03: [io 0x0a20-0x0a2f] has been reserved [ 0.126523] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 0.126525] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.126766] pnp 00:04: [dma 0 disabled] [ 0.126860] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.127053] pnp 00:05: [dma 0 disabled] [ 0.127080] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.127232] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.127233] system 00:06: [io 0x040b] has been reserved [ 0.127234] system 00:06: [io 0x04d6] has been reserved [ 0.127235] system 00:06: [io 0x0c00-0x0c01] has been reserved [ 0.127244] system 00:06: [io 0x0c14] has been reserved [ 0.127245] system 00:06: [io 0x0c50-0x0c51] has been reserved [ 0.127246] system 00:06: [io 0x0c52] has been reserved [ 0.127247] system 00:06: [io 0x0c6c] has been reserved [ 0.127248] system 00:06: [io 0x0c6f] has been reserved [ 0.127249] system 00:06: [io 0x0cd0-0x0cd1] has been reserved [ 0.127250] system 00:06: [io 0x0cd2-0x0cd3] has been reserved [ 0.127251] system 00:06: [io 0x0cd4-0x0cd5] has been reserved [ 0.127252] system 00:06: [io 0x0cd6-0x0cd7] has been reserved [ 0.127253] system 00:06: [io 0x0cd8-0x0cdf] has been reserved [ 0.127254] system 00:06: [io 0x0800-0x089f] has been reserved [ 0.127255] system 00:06: [io 0x0b00-0x0b0f] has been reserved [ 0.127256] system 00:06: [io 0x0b20-0x0b3f] has been reserved [ 0.127257] system 00:06: [io 0x0900-0x090f] has been reserved [ 0.127258] system 00:06: [io 0x0910-0x091f] has been reserved [ 0.127259] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.127260] system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved [ 0.127262] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.127263] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.127264] system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 0.127265] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.127266] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.127268] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.127555] pnp: PnP ACPI: found 7 devices [ 0.133686] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.133765] pci 0000:17:00.0: PCI bridge to [bus 18] [ 0.133788] pci 0000:16:00.0: PCI bridge to [bus 17-18] [ 0.133800] pci 0000:16:01.0: PCI bridge to [bus 1e] [ 0.133803] pci 0000:16:01.0: bridge window [io 0xf000-0xffff] [ 0.133807] pci 0000:16:01.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.133816] pci 0000:16:04.0: PCI bridge to [bus 1f] [ 0.133828] pci 0000:15:00.2: PCI bridge to [bus 16-1f] [ 0.133830] pci 0000:15:00.2: bridge window [io 0xf000-0xffff] [ 0.133835] pci 0000:15:00.2: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.133843] pci 0000:00:01.2: PCI bridge to [bus 15-1f] [ 0.133845] pci 0000:00:01.2: bridge window [io 0xf000-0xffff] [ 0.133849] pci 0000:00:01.2: bridge window [mem 0xfe700000-0xfe8fffff] [ 0.133858] pci 0000:00:08.1: PCI bridge to [bus 38] [ 0.133860] pci 0000:00:08.1: bridge window [io 0xe000-0xefff] [ 0.133865] pci 0000:00:08.1: bridge window [mem 0xfe300000-0xfe6fffff] [ 0.133868] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.133874] pci 0000:00:08.2: PCI bridge to [bus 39] [ 0.133879] pci 0000:00:08.2: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.133888] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.133889] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.133890] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.133891] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.133892] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.133893] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.133894] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window] [ 0.133895] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window] [ 0.133896] pci_bus 0000:15: resource 0 [io 0xf000-0xffff] [ 0.133897] pci_bus 0000:15: resource 1 [mem 0xfe700000-0xfe8fffff] [ 0.133898] pci_bus 0000:16: resource 0 [io 0xf000-0xffff] [ 0.133899] pci_bus 0000:16: resource 1 [mem 0xfe700000-0xfe7fffff] [ 0.133900] pci_bus 0000:1e: resource 0 [io 0xf000-0xffff] [ 0.133901] pci_bus 0000:1e: resource 1 [mem 0xfe700000-0xfe7fffff] [ 0.133902] pci_bus 0000:38: resource 0 [io 0xe000-0xefff] [ 0.133903] pci_bus 0000:38: resource 1 [mem 0xfe300000-0xfe6fffff] [ 0.133904] pci_bus 0000:38: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.133905] pci_bus 0000:39: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.134086] NET: Registered protocol family 2 [ 0.134294] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) [ 0.134331] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.134494] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.134613] TCP: Hash tables configured (established 131072 bind 65536) [ 0.134662] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.134704] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.134800] NET: Registered protocol family 1 [ 0.134959] pci 0000:38:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.135156] PCI: CLS 64 bytes, default 64 [ 0.135190] Unpacking initramfs... [ 0.407994] Freeing initrd memory: 23328K [ 0.408035] AMD-Vi: Unable to write to IOMMU perf counter. [ 0.408280] pci 0000:00:00.2: can't derive routing for PCI INT A [ 0.408281] pci 0000:00:00.2: PCI INT A: not connected [ 0.408677] iommu: Adding device 0000:00:01.0 to group 0 [ 0.408873] iommu: Adding device 0000:00:01.2 to group 1 [ 0.409078] iommu: Adding device 0000:00:08.0 to group 2 [ 0.409271] iommu: Adding device 0000:00:08.1 to group 3 [ 0.409289] iommu: Adding device 0000:00:08.2 to group 2 [ 0.409471] iommu: Adding device 0000:00:14.0 to group 4 [ 0.409486] iommu: Adding device 0000:00:14.3 to group 4 [ 0.409696] iommu: Adding device 0000:00:18.0 to group 5 [ 0.409710] iommu: Adding device 0000:00:18.1 to group 5 [ 0.409724] iommu: Adding device 0000:00:18.2 to group 5 [ 0.409746] iommu: Adding device 0000:00:18.3 to group 5 [ 0.409760] iommu: Adding device 0000:00:18.4 to group 5 [ 0.409773] iommu: Adding device 0000:00:18.5 to group 5 [ 0.409787] iommu: Adding device 0000:00:18.6 to group 5 [ 0.409799] iommu: Adding device 0000:00:18.7 to group 5 [ 0.410004] iommu: Adding device 0000:15:00.0 to group 6 [ 0.410032] iommu: Adding device 0000:15:00.1 to group 6 [ 0.410059] iommu: Adding device 0000:15:00.2 to group 6 [ 0.410075] iommu: Adding device 0000:16:00.0 to group 6 [ 0.410090] iommu: Adding device 0000:16:01.0 to group 6 [ 0.410104] iommu: Adding device 0000:16:04.0 to group 6 [ 0.410128] iommu: Adding device 0000:17:00.0 to group 6 [ 0.410153] iommu: Adding device 0000:1e:00.0 to group 6 [ 0.410422] iommu: Adding device 0000:38:00.0 to group 7 [ 0.410500] iommu: Using direct mapping for device 0000:38:00.0 [ 0.410592] iommu: Adding device 0000:38:00.1 to group 8 [ 0.410626] iommu: Adding device 0000:38:00.2 to group 8 [ 0.410661] iommu: Adding device 0000:38:00.3 to group 8 [ 0.410702] iommu: Adding device 0000:38:00.4 to group 8 [ 0.410735] iommu: Adding device 0000:38:00.6 to group 8 [ 0.410751] iommu: Adding device 0000:39:00.0 to group 2 [ 0.410973] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 0.410973] AMD-Vi: Extended features (0x4f77ef22294ada): [ 0.410974] PPR NX GT IA GA PC GA_vAPIC [ 0.410976] AMD-Vi: Interrupt remapping enabled [ 0.410976] AMD-Vi: virtual APIC enabled [ 0.505154] AMD-Vi: Lazy IO/TLB flushing enabled [ 0.505954] amd_uncore: AMD NB counters detected [ 0.505957] amd_uncore: AMD LLC counters detected [ 0.506908] Initialise system trusted keyrings [ 0.507066] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 0.508579] zbud: loaded [ 0.690509] Key type asymmetric registered [ 0.690511] Asymmetric key parser 'x509' registered [ 0.690573] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.690610] io scheduler noop registered [ 0.690611] io scheduler deadline registered [ 0.690710] io scheduler cfq registered (default) [ 0.690711] io scheduler mq-deadline registered [ 0.692286] pcieport 0000:00:01.2: AER enabled with IRQ 26 [ 0.692299] pcieport 0000:00:01.2: Signaling PME with IRQ 26 [ 0.692331] pcieport 0000:00:08.1: Signaling PME with IRQ 27 [ 0.692368] pcieport 0000:00:08.2: Signaling PME with IRQ 28 [ 0.692844] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.713740] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.714019] Linux agpgart interface v0.103 [ 0.714250] AMD IOMMUv2 driver by Joerg Roedel [ 0.714718] i8042: PNP: No PS/2 controller found. [ 0.714755] mousedev: PS/2 mouse device common for all mice [ 0.714795] rtc_cmos 00:02: RTC can wake from S4 [ 0.714941] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.714991] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.715049] ledtrig-cpu: registered to indicate activity on CPUs [ 0.715610] NET: Registered protocol family 10 [ 0.718786] Segment Routing with IPv6 [ 0.718804] mip6: Mobile IPv6 [ 0.718806] NET: Registered protocol family 17 [ 0.718809] mpls_gso: MPLS GSO support [ 0.719687] microcode: CPU0: patch_level=0x0810100b [ 0.719703] microcode: CPU1: patch_level=0x0810100b [ 0.719705] microcode: CPU2: patch_level=0x0810100b [ 0.719721] microcode: CPU3: patch_level=0x0810100b [ 0.719792] microcode: Microcode Update Driver: v2.2. [ 0.719814] sched_clock: Marking stable (719788355, 0)->(807833287, -88044932) [ 0.720068] registered taskstats version 1 [ 0.720069] Loading compiled-in X.509 certificates [ 0.743955] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff' [ 0.744178] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630' [ 0.744190] zswap: loaded using pool lzo/zbud [ 0.744368] AppArmor: AppArmor sha1 policy hashing enabled [ 0.745245] rtc_cmos 00:02: setting system clock to 2018-06-09 18:20:26 UTC (1528568426) [ 0.747686] Freeing unused kernel memory: 1528K [ 0.747686] Write protecting the kernel read-only data: 16384k [ 0.748133] Freeing unused kernel memory: 2008K [ 0.750246] Freeing unused kernel memory: 968K [ 0.754494] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.807465] ACPI: bus type USB registered [ 0.807486] usbcore: registered new interface driver usbfs [ 0.807490] usbcore: registered new interface driver hub [ 0.807925] usbcore: registered new device driver usb [ 0.809050] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 0.809051] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 0.809885] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.810586] cryptd: max_cpu_qlen set to 1000 [ 0.810791] SCSI subsystem initialized [ 0.811539] AVX2 version of gcm_enc/dec engaged. [ 0.811540] AES CTR mode by8 optimization enabled [ 0.813062] xhci_hcd 0000:15:00.0: xHCI Host Controller [ 0.813067] xhci_hcd 0000:15:00.0: new USB bus registered, assigned bus number 1 [ 0.813670] libata version 3.00 loaded. [ 0.823250] r8169 0000:1e:00.0 eth0: RTL8168h/8111h at 0x (ptrval), 30:9c:23:66:ea:5f, XID 14100800 IRQ 36 [ 0.823251] r8169 0000:1e:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 0.823786] r8169 0000:1e:00.0 enp30s0: renamed from eth0 [ 0.868529] xhci_hcd 0000:15:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x48000410 [ 0.868694] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.868695] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.868696] usb usb1: Product: xHCI Host Controller [ 0.868697] usb usb1: Manufacturer: Linux 4.16.0-2-amd64 xhci-hcd [ 0.868698] usb usb1: SerialNumber: 0000:15:00.0 [ 0.868792] hub 1-0:1.0: USB hub found [ 0.868807] hub 1-0:1.0: 10 ports detected [ 0.869100] xhci_hcd 0000:15:00.0: xHCI Host Controller [ 0.869102] xhci_hcd 0000:15:00.0: new USB bus registered, assigned bus number 2 [ 0.869103] xhci_hcd 0000:15:00.0: Host supports USB 3.10 Enhanced SuperSpeed [ 0.869128] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.869138] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.869139] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.869140] usb usb2: Product: xHCI Host Controller [ 0.869141] usb usb2: Manufacturer: Linux 4.16.0-2-amd64 xhci-hcd [ 0.869142] usb usb2: SerialNumber: 0000:15:00.0 [ 0.869221] hub 2-0:1.0: USB hub found [ 0.869234] hub 2-0:1.0: 4 ports detected [ 0.869395] ahci 0000:15:00.1: version 3.0 [ 0.869494] xhci_hcd 0000:38:00.3: xHCI Host Controller [ 0.869504] xhci_hcd 0000:38:00.3: new USB bus registered, assigned bus number 3 [ 0.869625] ahci 0000:15:00.1: SSS flag set, parallel bus scan disabled [ 0.869676] ahci 0000:15:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode [ 0.869679] ahci 0000:15:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 0.869691] xhci_hcd 0000:38:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x40000410 [ 0.870039] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.870040] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.870041] usb usb3: Product: xHCI Host Controller [ 0.870041] usb usb3: Manufacturer: Linux 4.16.0-2-amd64 xhci-hcd [ 0.870042] usb usb3: SerialNumber: 0000:38:00.3 [ 0.870201] hub 3-0:1.0: USB hub found [ 0.870214] hub 3-0:1.0: 4 ports detected [ 0.870461] scsi host0: ahci [ 0.870526] xhci_hcd 0000:38:00.3: xHCI Host Controller [ 0.870528] xhci_hcd 0000:38:00.3: new USB bus registered, assigned bus number 4 [ 0.870530] xhci_hcd 0000:38:00.3: Host supports USB 3.10 Enhanced SuperSpeed [ 0.870564] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.870574] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.870575] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.870576] usb usb4: Product: xHCI Host Controller [ 0.870577] usb usb4: Manufacturer: Linux 4.16.0-2-amd64 xhci-hcd [ 0.870578] usb usb4: SerialNumber: 0000:38:00.3 [ 0.870657] hub 4-0:1.0: USB hub found [ 0.870670] hub 4-0:1.0: 4 ports detected [ 0.870710] scsi host1: ahci [ 0.870818] scsi host2: ahci [ 0.870940] scsi host3: ahci [ 0.871028] xhci_hcd 0000:38:00.4: xHCI Host Controller [ 0.871030] xhci_hcd 0000:38:00.4: new USB bus registered, assigned bus number 5 [ 0.871053] scsi host4: ahci [ 0.871186] scsi host5: ahci [ 0.871198] xhci_hcd 0000:38:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x40000410 [ 0.871286] scsi host6: ahci [ 0.871381] scsi host7: ahci [ 0.871432] ata1: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880100 irq 39 [ 0.871434] ata2: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880180 irq 39 [ 0.871435] ata3: DUMMY [ 0.871436] ata4: DUMMY [ 0.871438] ata5: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880300 irq 39 [ 0.871440] ata6: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880380 irq 39 [ 0.871440] ata7: DUMMY [ 0.871441] ata8: DUMMY [ 0.871603] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.871604] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.871605] usb usb5: Product: xHCI Host Controller [ 0.871606] usb usb5: Manufacturer: Linux 4.16.0-2-amd64 xhci-hcd [ 0.871607] usb usb5: SerialNumber: 0000:38:00.4 [ 0.871631] ahci 0000:39:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 0.871633] ahci 0000:39:00.0: flags: 64bit ncq sntf ilck led clo only pmp fbs pio [ 0.871801] hub 5-0:1.0: USB hub found [ 0.871814] hub 5-0:1.0: 1 port detected [ 0.871830] scsi host8: ahci [ 0.871898] ata9: SATA max UDMA/133 abar m2048@0xfe900000 port 0xfe900100 irq 52 [ 0.871963] xhci_hcd 0000:38:00.4: xHCI Host Controller [ 0.871966] xhci_hcd 0000:38:00.4: new USB bus registered, assigned bus number 6 [ 0.871969] xhci_hcd 0000:38:00.4: Host supports USB 3.10 Enhanced SuperSpeed [ 0.872031] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.872057] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.872058] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.872059] usb usb6: Product: xHCI Host Controller [ 0.872059] usb usb6: Manufacturer: Linux 4.16.0-2-amd64 xhci-hcd [ 0.872060] usb usb6: SerialNumber: 0000:38:00.4 [ 0.872133] hub 6-0:1.0: USB hub found [ 0.872147] hub 6-0:1.0: 1 port detected [ 1.183267] ata9: SATA link down (SStatus 0 SControl 300) [ 1.200355] usb 5-1: new high-speed USB device number 2 using xhci_hcd [ 1.204317] usb 1-8: new low-speed USB device number 2 using xhci_hcd [ 1.344369] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.345506] ata1.00: ATA-9: CT240BX200SSD1, MU02.6, max UDMA/133 [ 1.345509] ata1.00: 468862128 sectors, multi 2: LBA48 NCQ (depth 31/32), AA [ 1.346092] ata1.00: configured for UDMA/133 [ 1.346618] scsi 0:0:0:0: Direct-Access ATA CT240BX200SSD1 .6 PQ: 0 ANSI: 5 [ 1.349043] usb 5-1: New USB device found, idVendor=0424, idProduct=2504 [ 1.349045] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.353112] hub 5-1:1.0: USB hub found [ 1.353466] hub 5-1:1.0: 4 ports detected [ 1.459028] usb 1-8: New USB device found, idVendor=413c, idProduct=3016 [ 1.459032] usb 1-8: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.459034] usb 1-8: Product: Dell Premium USB Optical Mouse [ 1.463107] hidraw: raw HID events driver (C) Jiri Kosina [ 1.477584] usbcore: registered new interface driver usbhid [ 1.477586] usbhid: USB HID core driver [ 1.478804] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8:1.0/0003:413C:3016.0001/input/input0 [ 1.478856] hid-generic 0003:413C:3016.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:15:00.0-8/input0 [ 1.532320] tsc: Refined TSC clocksource calibration: 3503.019 MHz [ 1.532330] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x327e750c213, max_idle_ns: 440795293426 ns [ 1.532364] clocksource: Switched to clocksource tsc [ 1.588257] usb 1-9: new low-speed USB device number 3 using xhci_hcd [ 1.660404] ata2: SATA link down (SStatus 0 SControl 300) [ 1.852327] usb 1-9: New USB device found, idVendor=045e, idProduct=00db [ 1.852331] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.852333] usb 1-9: Product: Natural\xc2\xae Ergonomic Keyboard 4000 [ 1.852335] usb 1-9: Manufacturer: Microsoft [ 1.883794] input: Microsoft Natural\xc2\xae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-9/1-9:1.0/0003:045E:00DB.0002/input/input1 [ 1.940295] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Natural\xc2\xae Ergonomic Keyboard 4000] on usb-0000:15:00.0-9/input0 [ 1.940758] input: Microsoft Natural\xc2\xae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-9/1-9:1.1/0003:045E:00DB.0003/input/input2 [ 2.000312] microsoft 0003:045E:00DB.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Natural\xc2\xae Ergonomic Keyboard 4000] on usb-0000:15:00.0-9/input1 [ 2.012033] usb 1-10: new high-speed USB device number 4 using xhci_hcd [ 2.140045] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.166425] ata5.00: ATAPI: ATAPI DVD D DH16D2S, EP53, max UDMA/100 [ 2.193475] ata5.00: configured for UDMA/100 [ 2.196282] scsi 4:0:0:0: CD-ROM ATAPI DVD D DH16D2S EP53 PQ: 0 ANSI: 5 [ 2.270128] usb 1-10: New USB device found, idVendor=0bda, idProduct=0111 [ 2.270130] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.270132] usb 1-10: Product: USB 2.0 Reader [ 2.270133] usb 1-10: Manufacturer: Generic [ 2.270134] usb 1-10: SerialNumber: 071030044067000593 [ 2.281490] usb-storage 1-10:1.0: USB Mass Storage device detected [ 2.281688] scsi host9: usb-storage 1-10:1.0 [ 2.281768] usbcore: registered new interface driver usb-storage [ 2.282212] usbcore: registered new interface driver uas [ 2.420571] random: fast init done [ 2.696039] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.708826] ata6.00: ATAPI: LITE-ON DVDRW LH-20A1S, 9L08, max UDMA/100 [ 2.721955] ata6.00: configured for UDMA/100 [ 2.723942] scsi 5:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1S 9L08 PQ: 0 ANSI: 5 [ 2.751959] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.751961] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.751967] sd 0:0:0:0: [sda] Write Protect is off [ 2.751968] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.751977] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.753610] sda: sda1 sda2 < sda5 > [ 2.754152] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.789464] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 2.789467] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.789881] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2.826373] sr 5:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.826895] sr 5:0:0:0: Attached scsi CD-ROM sr1 [ 3.317261] PM: Starting manual resume from disk [ 3.317372] PM: Image not found (code -22) [ 3.324557] scsi 9:0:0:0: Direct-Access Generic 2.0 Reader-CF 1.00 PQ: 0 ANSI: 0 CCS [ 3.354709] scsi 9:0:0:1: Direct-Access Generic 2.0 Reader-Multi 1.00 PQ: 0 ANSI: 0 CCS [ 3.409187] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.538213] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.556159] systemd[1]: Detected architecture x86-64. [ 3.561585] systemd[1]: Set hostname to . [ 3.645896] random: systemd: uninitialized urandom read (16 bytes read) [ 3.645972] systemd[1]: Listening on Journal Socket. [ 3.646007] random: systemd: uninitialized urandom read (16 bytes read) [ 3.646906] systemd[1]: Created slice User and Session Slice. [ 3.646942] random: systemd: uninitialized urandom read (16 bytes read) [ 3.647490] systemd[1]: Mounting POSIX Message Queue File System... [ 3.647941] systemd[1]: Starting Set the console keyboard layout... [ 3.648053] systemd[1]: Listening on Syslog Socket. [ 3.648639] systemd[1]: Mounting Kernel Debug File System... [ 3.649694] systemd[1]: Starting Load Kernel Modules... [ 3.659893] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 3.665447] lp: driver loaded but no devices found [ 3.676105] RPC: Registered named UNIX socket transport module. [ 3.676106] RPC: Registered udp transport module. [ 3.676106] RPC: Registered tcp transport module. [ 3.676107] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.677007] ppdev: user-space parallel port driver [ 3.678183] parport_pc 00:04: reported by Plug and Play ACPI [ 3.678286] parport0: PC-style at 0x378, irq 5 [PCSPP] [ 3.748598] systemd-journald[295]: Received request to flush runtime journal from PID 1 [ 3.755165] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 3.755171] ACPI: Power Button [PWRB] [ 3.755220] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 3.755236] ACPI: Power Button [PWRF] [ 3.784069] lp0: using parport0 (interrupt-driven). [ 3.808424] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 3.808872] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.809031] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 3.809072] sp5100-tco sp5100-tco: I/O address 0x0cd6 already in use [ 3.809239] sp5100-tco: probe of sp5100-tco failed with error -16 [ 3.820376] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.821499] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 3.821581] sr 5:0:0:0: Attached scsi generic sg2 type 5 [ 3.821631] sd 9:0:0:0: Attached scsi generic sg3 type 0 [ 3.821660] sd 9:0:0:1: Attached scsi generic sg4 type 0 [ 3.861463] Adding 4188156k swap on /dev/sda5. Priority:-2 extents:1 across:4188156k SSFS [ 3.863019] snd_hda_intel 0000:38:00.1: Handle vga_switcheroo audio client [ 3.890071] kvm: disabled by bios [ 3.891581] MCE: In-kernel MCE decoding enabled. [ 3.893144] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.893145] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 3.895315] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input6 [ 3.895360] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input7 [ 3.895391] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input8 [ 3.895430] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input9 [ 3.895469] input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input10 [ 3.895509] input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input11 [ 3.915406] [drm] amdgpu kernel modesetting enabled. [ 3.916998] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 3.917008] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.917009] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 3.917010] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 3.917011] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 3.917012] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 3.917013] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 3.917014] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 3.942062] random: crng init done [ 3.942063] random: 7 urandom warning(s) missed due to ratelimiting [ 3.982366] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input12 [ 3.982418] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input13 [ 3.982451] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input14 [ 3.982491] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input15 [ 3.982537] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input16 [ 3.982574] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input17 [ 3.982614] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input18 [ 3.982652] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input19 [ 3.985304] Parsing CRAT table with 1 nodes [ 3.985307] Creating topology SYSFS entries [ 3.985334] Topology: Add APU node [0x0:0x0] [ 3.985334] Finished initializing topology [ 3.985355] kfd kfd: Initialized module [ 3.986653] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1462:0x7A34 0xC8). [ 3.986668] [drm] register mmio base: 0xFE600000 [ 3.986669] [drm] register mmio size: 524288 [ 3.987393] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_gpu_info.bin [ 3.987408] [drm] probing gen 2 caps for device 1022:15db = 700d03/e [ 3.987410] [drm] probing mlw for device 1022:15db = 700d03 [ 3.987523] [drm] VCN decode is enabled in VM mode [ 3.987523] [drm] VCN encode is enabled in VM mode [ 4.008709] [drm] BIOS signature incorrect 5b 7 [ 4.008745] ATOM BIOS: 113-RAVEN-106 [ 4.008778] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 4.008784] amdgpu 0000:38:00.0: VRAM: 256M 0x000000F400000000 - 0x000000F40FFFFFFF (256M used) [ 4.008785] amdgpu 0000:38:00.0: GTT: 1024M 0x000000F500000000 - 0x000000F53FFFFFFF [ 4.008788] [drm] Detected VRAM RAM=256M, BAR=256M [ 4.008788] [drm] RAM width 128bits UNKNOWN [ 4.008855] [TTM] Zone kernel: Available graphics memory: 8091602 kiB [ 4.008856] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 4.008856] [TTM] Initializing pool allocator [ 4.008859] [TTM] Initializing DMA pool allocator [ 4.008883] [drm] amdgpu: 256M of VRAM memory ready [ 4.008884] [drm] amdgpu: 3072M of GTT memory ready. [ 4.008890] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 4.009081] [drm] PCIE GART of 1024M enabled (table at 0x000000F400800000). [ 4.009147] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.009147] [drm] Driver supports precise vblank timestamp query. [ 4.009838] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_asd.bin [ 4.010245] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_pfp.bin [ 4.010868] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_me.bin [ 4.011587] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_ce.bin [ 4.012350] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_rlc.bin [ 4.013993] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_mec.bin [ 4.015488] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_mec2.bin [ 4.017064] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_sdma.bin [ 4.017066] [drm] use_doorbell being set to: [true] [ 4.018237] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_vcn.bin [ 4.018239] [drm] Found VCN firmware Version: 1.73 Family ID: 18 [ 4.199800] [drm] VCN decode and encode initialized successfully. [ 4.207145] amdgpu 0000:38:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0 [ 4.207147] amdgpu 0000:38:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0 [ 4.207149] amdgpu 0000:38:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0 [ 4.207150] amdgpu 0000:38:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0 [ 4.207151] amdgpu 0000:38:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0 [ 4.207153] amdgpu 0000:38:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0 [ 4.207154] amdgpu 0000:38:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0 [ 4.207155] amdgpu 0000:38:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0 [ 4.207157] amdgpu 0000:38:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0 [ 4.207158] amdgpu 0000:38:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0 [ 4.207159] amdgpu 0000:38:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1 [ 4.207161] amdgpu 0000:38:00.0: ring 11(vcn_dec) uses VM inv eng 5 on hub 1 [ 4.207162] amdgpu 0000:38:00.0: ring 12(vcn_enc0) uses VM inv eng 6 on hub 1 [ 4.207163] amdgpu 0000:38:00.0: ring 13(vcn_enc1) uses VM inv eng 7 on hub 1 [ 4.210927] [drm] Initialized amdgpu 3.23.0 20150101 for 0000:38:00.0 on minor 0 [ 4.305743] audit: type=1400 audit(1528568430.055:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=565 comm="apparmor_parser" [ 4.305896] audit: type=1400 audit(1528568430.055:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=564 comm="apparmor_parser" [ 4.306477] audit: type=1400 audit(1528568430.055:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=562 comm="apparmor_parser" [ 4.306479] audit: type=1400 audit(1528568430.055:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=562 comm="apparmor_parser" [ 4.306480] audit: type=1400 audit(1528568430.055:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=562 comm="apparmor_parser" [ 4.307250] audit: type=1400 audit(1528568430.055:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=567 comm="apparmor_parser" [ 4.309686] audit: type=1400 audit(1528568430.059:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=568 comm="apparmor_parser" [ 4.311327] audit: type=1400 audit(1528568430.059:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=569 comm="apparmor_parser" [ 4.311329] audit: type=1400 audit(1528568430.059:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=569 comm="apparmor_parser" [ 4.680475] IPv6: ADDRCONF(NETDEV_UP): enp30s0: link is not ready [ 4.681642] r8169 0000:1e:00.0: firmware: direct-loading firmware rtl_nic/rtl8168h-2.fw [ 4.734643] r8169 0000:1e:00.0 enp30s0: link down [ 4.734652] r8169 0000:1e:00.0 enp30s0: link down [ 4.734742] IPv6: ADDRCONF(NETDEV_UP): enp30s0: link is not ready [ 8.317756] r8169 0000:1e:00.0 enp30s0: link up [ 8.317762] IPv6: ADDRCONF(NETDEV_CHANGE): enp30s0: link becomes ready [ 8.400850] FS-Cache: Loaded [ 8.411634] FS-Cache: Netfs 'nfs' registered for caching [ 8.414401] Key type dns_resolver registered [ 8.425596] NFS: Registering the id_resolver key type [ 8.425656] Key type id_resolver registered [ 8.425657] Key type id_legacy registered [ 15.957476] sd 9:0:0:0: [sdb] Attached SCSI removable disk [ 18.058656] sd 9:0:0:1: [sdc] Attached SCSI removable disk ~~~~ [ 9.830] X.Org X Server 1.20.0 X Protocol Version 11, Revision 0 [ 9.831] Build Operating System: Linux 4.9.0-6-amd64 x86_64 Debian [ 9.831] Current Operating System: Linux vostro 4.16.0-2-amd64 #1 SMP Debian 4.16.12-1 (2018-05-27) x86_64 [ 9.831] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.16.0-2-amd64 root=UUID=364b5ebd-644e-415b-ab83-938265caaae5 ro quiet [ 9.831] Build Date: 24 May 2018 04:23:27PM [ 9.831] xorg-server 2:1.20.0-2 (https://www.debian.org/support) [ 9.831] Current version of pixman: 0.34.0 [ 9.831] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 9.831] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 9.831] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 9 20:20:35 2018 [ 9.831] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 9.831] (==) No Layout section. Using the first Screen section. [ 9.831] (==) No screen section available. Using defaults. [ 9.831] (**) |-->Screen "Default Screen Section" (0) [ 9.831] (**) | |-->Monitor "" [ 9.831] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 9.831] (==) Automatically adding devices [ 9.831] (==) Automatically enabling devices [ 9.831] (==) Automatically adding GPU devices [ 9.831] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 9.831] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 9.831] Entry deleted from font path. [ 9.831] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 9.831] (==) ModulePath set to "/usr/lib/xorg/modules" [ 9.831] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 9.831] (II) Loader magic: 0x55afc1396de0 [ 9.831] (II) Module ABI versions: [ 9.831] X.Org ANSI C Emulation: 0.4 [ 9.831] X.Org Video Driver: 24.0 [ 9.831] X.Org XInput driver : 24.1 [ 9.831] X.Org Server Extension : 10.0 [ 9.832] (++) using VT number 7 [ 9.832] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 9.832] (II) xfree86: Adding drm device (/dev/dri/card0) [ 9.834] (--) PCI:*(56@0:0:0) 1002:15dd:1462:7a34 rev 200, Mem @ 0xe0000000/268435456, 0xf0000000/2097152, 0xfe600000/524288, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072 [ 9.834] (II) LoadModule: "glx" [ 9.834] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 9.835] (II) Module glx: vendor="X.Org Foundation" [ 9.835] compiled for 1.20.0, module version = 1.0.0 [ 9.835] ABI class: X.Org Server Extension, version 10.0 [ 9.835] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0 [ 9.835] loading driver: amdgpu [ 9.835] (==) Matched amdgpu as autoconfigured driver 0 [ 9.835] (==) Matched ati as autoconfigured driver 1 [ 9.835] (==) Matched modesetting as autoconfigured driver 2 [ 9.835] (==) Matched fbdev as autoconfigured driver 3 [ 9.835] (==) Matched vesa as autoconfigured driver 4 [ 9.835] (==) Assigned the driver to the xf86ConfigLayout [ 9.835] (II) LoadModule: "amdgpu" [ 9.835] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so [ 9.835] (II) Module amdgpu: vendor="X.Org Foundation" [ 9.835] compiled for 1.20.0, module version = 18.0.1 [ 9.835] Module class: X.Org Video Driver [ 9.835] ABI class: X.Org Video Driver, version 24.0 [ 9.835] (II) LoadModule: "ati" [ 9.835] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so [ 9.835] (II) Module ati: vendor="X.Org Foundation" [ 9.835] compiled for 1.20.0, module version = 18.0.1 [ 9.835] Module class: X.Org Video Driver [ 9.835] ABI class: X.Org Video Driver, version 24.0 [ 9.835] (II) LoadModule: "modesetting" [ 9.835] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 9.835] (II) Module modesetting: vendor="X.Org Foundation" [ 9.835] compiled for 1.20.0, module version = 1.20.0 [ 9.835] Module class: X.Org Video Driver [ 9.835] ABI class: X.Org Video Driver, version 24.0 [ 9.835] (II) LoadModule: "fbdev" [ 9.835] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 9.835] (II) Module fbdev: vendor="X.Org Foundation" [ 9.835] compiled for 1.20.0, module version = 0.5.0 [ 9.835] Module class: X.Org Video Driver [ 9.835] ABI class: X.Org Video Driver, version 24.0 [ 9.836] (II) LoadModule: "vesa" [ 9.836] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 9.836] (II) Module vesa: vendor="X.Org Foundation" [ 9.836] compiled for 1.20.0, module version = 2.3.4 [ 9.836] Module class: X.Org Video Driver [ 9.836] ABI class: X.Org Video Driver, version 24.0 [ 9.836] (II) AMDGPU: Driver for AMD Radeon: All GPUs supported by the amdgpu kernel driver [ 9.836] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 9.836] (II) FBDEV: driver for framebuffer: fbdev [ 9.836] (II) VESA: driver for VESA chipsets: vesa [ 9.837] (II) [KMS] Kernel modesetting enabled. [ 9.837] (WW) Falling back to old probe method for modesetting [ 9.837] (WW) Falling back to old probe method for fbdev [ 9.837] (II) Loading sub module "fbdevhw" [ 9.837] (II) LoadModule: "fbdevhw" [ 9.837] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 9.837] (II) Module fbdevhw: vendor="X.Org Foundation" [ 9.837] compiled for 1.20.0, module version = 0.0.2 [ 9.837] ABI class: X.Org Video Driver, version 24.0 [ 9.837] (EE) open /dev/fb0: No such file or directory [ 9.837] (WW) Falling back to old probe method for vesa [ 9.837] (II) AMDGPU(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 9.837] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32 [ 9.837] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 9.837] (==) AMDGPU(0): Default visual is TrueColor [ 9.837] (==) AMDGPU(0): RGB weight 888 [ 9.837] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC) [ 9.837] (--) AMDGPU(0): Chipset: "Unknown AMD Radeon GPU" (ChipID = 0x15dd) [ 9.837] (II) Loading sub module "fb" [ 9.837] (II) LoadModule: "fb" [ 9.837] (II) Loading /usr/lib/xorg/modules/libfb.so [ 9.837] (II) Module fb: vendor="X.Org Foundation" [ 9.837] compiled for 1.20.0, module version = 1.0.0 [ 9.837] ABI class: X.Org ANSI C Emulation, version 0.4 [ 9.837] (II) Loading sub module "dri2" [ 9.837] (II) LoadModule: "dri2" [ 9.837] (II) Module "dri2" already built-in [ 9.867] (II) Loading sub module "glamoregl" [ 9.867] (II) LoadModule: "glamoregl" [ 9.867] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 9.869] (II) Module glamoregl: vendor="X.Org Foundation" [ 9.869] compiled for 1.20.0, module version = 1.0.1 [ 9.869] ABI class: X.Org ANSI C Emulation, version 0.4 [ 9.874] (II) AMDGPU(0): glamor X acceleration enabled on AMD RAVEN (DRM 3.23.0 / 4.16.0-2-amd64, LLVM 6.0.0) [ 9.874] (II) AMDGPU(0): glamor detected, initialising EGL layer. [ 9.874] (==) AMDGPU(0): TearFree property default: auto [ 9.874] (II) AMDGPU(0): KMS Pageflipping: enabled [ 9.874] (WW) AMDGPU(0): No outputs definitely connected, trying again... [ 9.874] (WW) AMDGPU(0): Unable to find connected outputs - setting 1024x768 initial framebuffer [ 9.874] (II) AMDGPU(0): mem size init: gart size :bfbf9000 vram size: s:f02b000 visible:f02b000 [ 9.874] (==) AMDGPU(0): DPI set to (96, 96) [ 9.874] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0) [ 9.874] (II) Loading sub module "ramdac" [ 9.874] (II) LoadModule: "ramdac" [ 9.874] (II) Module "ramdac" already built-in [ 9.874] (EE) AMDGPU(0): No modes. [ 9.874] (II) UnloadModule: "amdgpu" [ 9.874] (II) UnloadSubModule: "glamoregl" [ 9.874] (II) Unloading glamoregl [ 9.874] (II) UnloadSubModule: "fb" [ 9.874] (II) Unloading fb [ 9.874] (EE) Screen(s) found, but none have a usable configuration. [ 9.874] (EE) Fatal server error: [ 9.874] (EE) no screens found(EE) [ 9.874] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 9.874] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 9.874] (EE) [ 9.875] (EE) Server terminated with error (1). Closing log file. ~~~~ amdgpu 2756608 0 chash 16384 1 amdgpu gpu_sched 28672 1 amdgpu ttm 126976 1 amdgpu drm_kms_helper 200704 1 amdgpu drm 462848 5 amdgpu,gpu_sched,ttm,drm_kms_helper i2c_algo_bit 16384 1 amdgpu ~~~~