[ 0.000000] BRK [0x16296000, 0x16296fff] PGTABLE [ 0.000000] BRK [0x16297000, 0x16297fff] PGTABLE [ 0.000000] BRK [0x16298000, 0x16298fff] PGTABLE [ 0.000000] BRK [0x16299000, 0x16299fff] PGTABLE [ 0.000000] BRK [0x1629a000, 0x1629afff] PGTABLE [ 0.000000] BRK [0x1629b000, 0x1629bfff] PGTABLE [ 0.000000] BRK [0x1629c000, 0x1629cfff] PGTABLE [ 0.000000] BRK [0x1629d000, 0x1629dfff] PGTABLE [ 0.000000] BRK [0x1629e000, 0x1629efff] PGTABLE [ 0.000000] Secure boot disabled [ 0.000000] RAMDISK: [mem 0x3bbea000-0x3e974fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000009D5A8000 000024 (v02 SECCSD) [ 0.000000] ACPI: XSDT 0x000000009D5A8088 00008C (v01 SECCSD LH43STAR 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x000000009D5AE8E8 00010C (v05 SECCSD LH43STAR 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180313/tbfadt-624) [ 0.000000] ACPI: DSDT 0x000000009D5A81A0 006747 (v02 SECCSD LH43STAR 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 0x000000009DBC2080 000040 [ 0.000000] ACPI: APIC 0x000000009D5AE9F8 00007E (v03 SECCSD LH43STAR 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x000000009D5AEA78 000044 (v01 SECCSD LH43STAR 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x000000009D5AEAC0 00003C (v01 SECCSD LH43STAR 01072009 MSFT 00010013) [ 0.000000] ACPI: MSDM 0x000000009D5AEB00 000055 (v03 SECCSD LH43STAR 01072009 AMI 00010013) [ 0.000000] ACPI: HPET 0x000000009D5AEB58 000038 (v01 SECCSD LH43STAR 01072009 AMI 00000005) [ 0.000000] ACPI: BGRT 0x000000009D5AEB90 000038 (v00 SECCSD LH43STAR 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x000000009D5AEBC8 000B10 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x000000009D5AF6D8 006352 (v02 AMD AGESA 00000002 MSFT 04000000) [ 0.000000] ACPI: CRAT 0x000000009D5B5A30 000380 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x000000009D5B5DB0 0013CA (v01 AMD CPMDFIGP 00000001 INTL 20051117) [ 0.000000] ACPI: SSDT 0x000000009D5B7180 00008C (v01 AMD CPMDFMOT 00000001 INTL 20051117) [ 0.000000] ACPI: SSDT 0x000000009D5B7210 0010E8 (v01 AMD CPMCMN 00000001 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x13efec000-0x13effdfff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000013effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000009d56efff] [ 0.000000] node 0: [mem 0x000000009e73b000-0x000000009e73bfff] [ 0.000000] node 0: [mem 0x000000009e744000-0x000000009e897fff] [ 0.000000] node 0: [mem 0x000000009eccd000-0x000000009ed10fff] [ 0.000000] node 0: [mem 0x000000009eff2000-0x000000009effffff] [ 0.000000] node 0: [mem 0x0000000100001000-0x000000013effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013effffff] [ 0.000000] On node 0 totalpages: 902836 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 24 pages reserved [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10013 pages used for memmap [ 0.000000] DMA32 zone: 640790 pages, LIFO batch:31 [ 0.000000] Normal zone: 4032 pages used for memmap [ 0.000000] Normal zone: 258047 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] e820: [mem 0x9f000000-0xfebfffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x90/0x448 with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 38 pages/cpu @ (ptrval) s115480 r8192 d31976 u524288 [ 0.000000] pcpu-alloc: s115480 r8192 d31976 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 888703 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.17.1-025.dbg.x86_64+ root=UUID=c284aed1-bc75-4b7e-afef-14925d616789 ro resume=UUID=5f89a2fa-e9bf-4ca2-9c51-5738d18fc224 quiet LANG=fr_FR.UTF-8 amdgpu.cik_support=1 radeon.cik_support=0 amdgpu.dpm=1 amdgpu.dc_log=1 drm.debug=0x4 amdgpu.dc=1 [ 0.000000] Memory: 3234988K/3611344K available (10252K kernel code, 590K rwdata, 2368K rodata, 1140K init, 816K bss, 376356K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180313 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.005000] tsc: Fast TSC calibration using PIT [ 0.006000] tsc: Detected 998.117 MHz processor [ 0.006000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1cc64892c28, max_idle_ns: 881590561400 ns [ 0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.23 BogoMIPS (lpj=998117) [ 0.006000] pid_max: default: 32768 minimum: 301 [ 0.007327] Security Framework initialized [ 0.007331] SELinux: Initializing. [ 0.007359] SELinux: Starting in enforcing mode [ 0.009365] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010425] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010505] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.010543] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.011037] CPU: Physical Processor ID: 0 [ 0.011039] CPU: Processor Core ID: 0 [ 0.011041] mce: CPU supports 6 MCE banks [ 0.011054] LVT offset 1 assigned for vector 0xf9 [ 0.011063] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.011065] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0 [ 0.011070] Spectre V2 : Mitigation: Full AMD retpoline [ 0.011071] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch [ 0.011076] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.011306] Freeing SMP alternatives memory: 28K [ 0.028000] smpboot: CPU0: AMD Quad-Core Processor (up to 1.4GHz) (family: 0x16, model: 0x0, stepping: 0x1) [ 0.032056] Performance Events: AMD PMU driver. [ 0.032071] ... version: 0 [ 0.032073] ... bit width: 48 [ 0.032075] ... generic registers: 4 [ 0.032077] ... value mask: 0000ffffffffffff [ 0.032079] ... max period: 00007fffffffffff [ 0.032080] ... fixed-purpose events: 0 [ 0.032082] ... event mask: 000000000000000f [ 0.033052] Hierarchical SRCU implementation. [ 0.035268] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.036070] smp: Bringing up secondary CPUs ... [ 0.042065] x86: Booting SMP configuration: [ 0.042071] .... node #0, CPUs: #1 #2 #3 [ 0.061074] smp: Brought up 1 node, 4 CPUs [ 0.061074] smpboot: Max logical packages: 1 [ 0.061074] smpboot: Total of 4 processors activated (7984.93 BogoMIPS) [ 0.063151] devtmpfs: initialized [ 0.063151] device: 'platform': device_add [ 0.063151] PM: Adding info for No Bus:platform [ 0.063151] bus: 'platform': registered [ 0.063151] bus: 'cpu': registered [ 0.063151] device: 'cpu': device_add [ 0.063151] PM: Adding info for No Bus:cpu [ 0.063151] bus: 'memory': registered [ 0.063151] device: 'memory': device_add [ 0.063155] PM: Adding info for No Bus:memory [ 0.063159] x86/mm: Memory block size: 128MB [ 0.063166] device: 'memory0': device_add [ 0.063175] bus: 'memory': add device memory0 [ 0.063191] PM: Adding info for memory:memory0 [ 0.063203] device: 'memory1': device_add [ 0.063212] bus: 'memory': add device memory1 [ 0.063222] PM: Adding info for memory:memory1 [ 0.063230] device: 'memory2': device_add [ 0.063239] bus: 'memory': add device memory2 [ 0.063252] PM: Adding info for memory:memory2 [ 0.063261] device: 'memory3': device_add [ 0.063269] bus: 'memory': add device memory3 [ 0.063280] PM: Adding info for memory:memory3 [ 0.063288] device: 'memory4': device_add [ 0.063296] bus: 'memory': add device memory4 [ 0.063309] PM: Adding info for memory:memory4 [ 0.063317] device: 'memory5': device_add [ 0.063326] bus: 'memory': add device memory5 [ 0.063336] PM: Adding info for memory:memory5 [ 0.063343] device: 'memory6': device_add [ 0.063352] bus: 'memory': add device memory6 [ 0.063365] PM: Adding info for memory:memory6 [ 0.063377] device: 'memory7': device_add [ 0.063386] bus: 'memory': add device memory7 [ 0.063396] PM: Adding info for memory:memory7 [ 0.063404] device: 'memory8': device_add [ 0.063412] bus: 'memory': add device memory8 [ 0.063425] PM: Adding info for memory:memory8 [ 0.063433] device: 'memory9': device_add [ 0.063442] bus: 'memory': add device memory9 [ 0.063452] PM: Adding info for memory:memory9 [ 0.063460] device: 'memory10': device_add [ 0.063469] bus: 'memory': add device memory10 [ 0.063482] PM: Adding info for memory:memory10 [ 0.063490] device: 'memory11': device_add [ 0.063499] bus: 'memory': add device memory11 [ 0.063509] PM: Adding info for memory:memory11 [ 0.063516] device: 'memory12': device_add [ 0.063525] bus: 'memory': add device memory12 [ 0.063539] PM: Adding info for memory:memory12 [ 0.063547] device: 'memory13': device_add [ 0.063555] bus: 'memory': add device memory13 [ 0.063565] PM: Adding info for memory:memory13 [ 0.063573] device: 'memory14': device_add [ 0.063581] bus: 'memory': add device memory14 [ 0.063594] PM: Adding info for memory:memory14 [ 0.063602] device: 'memory15': device_add [ 0.063611] bus: 'memory': add device memory15 [ 0.063621] PM: Adding info for memory:memory15 [ 0.063629] device: 'memory16': device_add [ 0.063637] bus: 'memory': add device memory16 [ 0.063650] PM: Adding info for memory:memory16 [ 0.063658] device: 'memory17': device_add [ 0.063667] bus: 'memory': add device memory17 [ 0.064011] PM: Adding info for memory:memory17 [ 0.064022] device: 'memory18': device_add [ 0.064032] bus: 'memory': add device memory18 [ 0.064044] PM: Adding info for memory:memory18 [ 0.064053] device: 'memory19': device_add [ 0.064061] bus: 'memory': add device memory19 [ 0.064071] PM: Adding info for memory:memory19 [ 0.064079] device: 'memory32': device_add [ 0.064088] bus: 'memory': add device memory32 [ 0.064101] PM: Adding info for memory:memory32 [ 0.064109] device: 'memory33': device_add [ 0.064118] bus: 'memory': add device memory33 [ 0.064128] PM: Adding info for memory:memory33 [ 0.064135] device: 'memory34': device_add [ 0.064144] bus: 'memory': add device memory34 [ 0.064156] PM: Adding info for memory:memory34 [ 0.064168] device: 'memory35': device_add [ 0.064177] bus: 'memory': add device memory35 [ 0.064186] PM: Adding info for memory:memory35 [ 0.064194] device: 'memory36': device_add [ 0.064202] bus: 'memory': add device memory36 [ 0.064215] PM: Adding info for memory:memory36 [ 0.064223] device: 'memory37': device_add [ 0.064232] bus: 'memory': add device memory37 [ 0.064242] PM: Adding info for memory:memory37 [ 0.064250] device: 'memory38': device_add [ 0.064258] bus: 'memory': add device memory38 [ 0.064271] PM: Adding info for memory:memory38 [ 0.064280] device: 'memory39': device_add [ 0.064288] bus: 'memory': add device memory39 [ 0.064298] PM: Adding info for memory:memory39 [ 0.064314] bus: 'container': registered [ 0.064317] device: 'container': device_add [ 0.064330] PM: Adding info for No Bus:container [ 0.064655] PM: Registering ACPI NVS region [mem 0x9d5b9000-0x9dbcbfff] (6369280 bytes) [ 0.065093] PM: Registering ACPI NVS region [mem 0x9e73c000-0x9e743fff] (32768 bytes) [ 0.065131] bus: 'workqueue': registered [ 0.065134] device: 'workqueue': device_add [ 0.065145] PM: Adding info for No Bus:workqueue [ 0.065231] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.065231] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.065231] pinctrl core: initialized pinctrl subsystem [ 0.065415] NET: Registered protocol family 16 [ 0.066025] audit: initializing netlink subsys (disabled) [ 0.066040] device class 'bdi': registering [ 0.066040] audit: type=2000 audit(1528916199.066:1): state=initialized audit_enabled=0 res=1 [ 0.066040] device class 'pci_bus': registering [ 0.066058] bus: 'pci': registered [ 0.066077] bus: 'pci_express': registered [ 0.066079] device class 'backlight': registering [ 0.066086] device class 'tty': registering [ 0.066093] device class 'vtconsole': registering [ 0.066102] device: 'vtcon0': device_add [ 0.066120] PM: Adding info for No Bus:vtcon0 [ 0.066127] device class 'iommu': registering [ 0.066143] bus: 'node': registered [ 0.066146] device: 'node': device_add [ 0.066165] PM: Adding info for No Bus:node [ 0.066179] bus: 'i2c': registered [ 0.066185] bus: 'i2c': add driver dummy [ 0.066220] cpuidle: using governor ladder [ 0.066220] cpuidle: using governor menu [ 0.066220] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.066220] ACPI: bus type PCI registered [ 0.066220] device class 'dma': registering [ 0.066220] device class 'dmi': registering [ 0.066220] device: 'id': device_add [ 0.066245] PM: Adding info for No Bus:id [ 0.066284] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.066290] PCI: not using MMCONFIG [ 0.066293] PCI: Using configuration type 1 for base access [ 0.066294] PCI: Using configuration type 1 for extended access [ 0.067011] device: 'node0': device_add [ 0.067025] bus: 'node': add device node0 [ 0.067037] PM: Adding info for node:node0 [ 0.067155] device: 'cpu0': device_add [ 0.067164] bus: 'cpu': add device cpu0 [ 0.067179] PM: Adding info for cpu:cpu0 [ 0.067252] device: 'cpu1': device_add [ 0.067262] bus: 'cpu': add device cpu1 [ 0.067273] PM: Adding info for cpu:cpu1 [ 0.067337] device: 'cpu2': device_add [ 0.067346] bus: 'cpu': add device cpu2 [ 0.067361] PM: Adding info for cpu:cpu2 [ 0.067425] device: 'cpu3': device_add [ 0.067434] bus: 'cpu': add device cpu3 [ 0.067445] PM: Adding info for cpu:cpu3 [ 0.071028] device: 'writeback': device_add [ 0.071028] bus: 'workqueue': add device writeback [ 0.071042] PM: Adding info for workqueue:writeback [ 0.071081] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.071081] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.071118] device class 'block': registering [ 0.071118] device class 'graphics': registering [ 0.071118] device: 'fbcon': device_add [ 0.071122] PM: Adding info for No Bus:fbcon [ 0.072008] ACPI: Added _OSI(Module Device) [ 0.072008] ACPI: Added _OSI(Processor Device) [ 0.072008] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.072008] ACPI: Added _OSI(Processor Aggregator Device) [ 0.072008] ACPI: Added _OSI(Linux-Dell-Video) [ 0.092360] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.102515] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.109787] ACPI: EC: EC started [ 0.109790] ACPI: EC: interrupt blocked [ 0.224105] ACPI: \_SB_.PCI0.SBRG.H_EC: Used as first EC [ 0.224114] ACPI: \_SB_.PCI0.SBRG.H_EC: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.224118] ACPI: \_SB_.PCI0.SBRG.H_EC: Used as boot DSDT EC to handle transactions [ 0.224120] ACPI: Interpreter enabled [ 0.224174] ACPI: (supports S0 S3 S5) [ 0.224178] ACPI: Using IOAPIC for interrupt routing [ 0.224269] bus: 'acpi': registered [ 0.224280] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.224395] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.224440] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.225126] ACPI: Enabled 5 GPEs in block 00 to 1F [ 0.225188] device: 'LNXSYSTM:00': device_add [ 0.225200] bus: 'acpi': add device LNXSYSTM:00 [ 0.225216] PM: Adding info for acpi:LNXSYSTM:00 [ 0.225319] device: 'LNXCPU:00': device_add [ 0.225326] bus: 'acpi': add device LNXCPU:00 [ 0.225337] PM: Adding info for acpi:LNXCPU:00 [ 0.225389] device: 'LNXCPU:01': device_add [ 0.225395] bus: 'acpi': add device LNXCPU:01 [ 0.225405] PM: Adding info for acpi:LNXCPU:01 [ 0.225454] device: 'LNXCPU:02': device_add [ 0.225460] bus: 'acpi': add device LNXCPU:02 [ 0.225475] PM: Adding info for acpi:LNXCPU:02 [ 0.225523] device: 'LNXCPU:03': device_add [ 0.225529] bus: 'acpi': add device LNXCPU:03 [ 0.225540] PM: Adding info for acpi:LNXCPU:03 [ 0.225639] device: 'LNXSYBUS:00': device_add [ 0.225645] bus: 'acpi': add device LNXSYBUS:00 [ 0.225659] PM: Adding info for acpi:LNXSYBUS:00 [ 0.226208] device: 'PNP0A08:00': device_add [ 0.226215] bus: 'acpi': add device PNP0A08:00 [ 0.226226] PM: Adding info for acpi:PNP0A08:00 [ 0.226402] device: 'PNP0C01:00': device_add [ 0.226409] bus: 'acpi': add device PNP0C01:00 [ 0.226424] PM: Adding info for acpi:PNP0C01:00 [ 0.226509] device: 'device:00': device_add [ 0.226515] bus: 'acpi': add device device:00 [ 0.226526] PM: Adding info for acpi:device:00 [ 0.226745] device: 'PNP0C02:00': device_add [ 0.226751] bus: 'acpi': add device PNP0C02:00 [ 0.226762] PM: Adding info for acpi:PNP0C02:00 [ 0.226844] device: 'device:01': device_add [ 0.226850] bus: 'acpi': add device device:01 [ 0.226861] PM: Adding info for acpi:device:01 [ 0.226940] device: 'LNXVIDEO:00': device_add [ 0.226946] bus: 'acpi': add device LNXVIDEO:00 [ 0.226956] PM: Adding info for acpi:LNXVIDEO:00 [ 0.227043] device: 'device:02': device_add [ 0.227053] bus: 'acpi': add device device:02 [ 0.227063] PM: Adding info for acpi:device:02 [ 0.227132] device: 'device:03': device_add [ 0.227138] bus: 'acpi': add device device:03 [ 0.227148] PM: Adding info for acpi:device:03 [ 0.227218] device: 'device:04': device_add [ 0.227224] bus: 'acpi': add device device:04 [ 0.227238] PM: Adding info for acpi:device:04 [ 0.227309] device: 'device:05': device_add [ 0.227315] bus: 'acpi': add device device:05 [ 0.227325] PM: Adding info for acpi:device:05 [ 0.227554] device: 'device:06': device_add [ 0.227561] bus: 'acpi': add device device:06 [ 0.227572] PM: Adding info for acpi:device:06 [ 0.227639] device: 'device:07': device_add [ 0.227648] bus: 'acpi': add device device:07 [ 0.227659] PM: Adding info for acpi:device:07 [ 0.227723] device: 'device:08': device_add [ 0.227729] bus: 'acpi': add device device:08 [ 0.227740] PM: Adding info for acpi:device:08 [ 0.227807] device: 'device:09': device_add [ 0.227813] bus: 'acpi': add device device:09 [ 0.227827] PM: Adding info for acpi:device:09 [ 0.227913] device: 'device:0a': device_add [ 0.227919] bus: 'acpi': add device device:0a [ 0.227929] PM: Adding info for acpi:device:0a [ 0.228010] device: 'device:0b': device_add [ 0.228017] bus: 'acpi': add device device:0b [ 0.228027] PM: Adding info for acpi:device:0b [ 0.228096] device: 'device:0c': device_add [ 0.228105] bus: 'acpi': add device device:0c [ 0.228115] PM: Adding info for acpi:device:0c [ 0.228181] device: 'device:0d': device_add [ 0.228187] bus: 'acpi': add device device:0d [ 0.228197] PM: Adding info for acpi:device:0d [ 0.228262] device: 'device:0e': device_add [ 0.228268] bus: 'acpi': add device device:0e [ 0.228282] PM: Adding info for acpi:device:0e [ 0.228347] device: 'device:0f': device_add [ 0.228353] bus: 'acpi': add device device:0f [ 0.228363] PM: Adding info for acpi:device:0f [ 0.228585] device: 'device:10': device_add [ 0.228591] bus: 'acpi': add device device:10 [ 0.228602] PM: Adding info for acpi:device:10 [ 0.228675] device: 'device:11': device_add [ 0.228685] bus: 'acpi': add device device:11 [ 0.228695] PM: Adding info for acpi:device:11 [ 0.228795] device: 'PNP0C02:01': device_add [ 0.228801] bus: 'acpi': add device PNP0C02:01 [ 0.228812] PM: Adding info for acpi:PNP0C02:01 [ 0.228894] device: 'PNP0000:00': device_add [ 0.228901] bus: 'acpi': add device PNP0000:00 [ 0.228915] PM: Adding info for acpi:PNP0000:00 [ 0.229006] device: 'PNP0200:00': device_add [ 0.229013] bus: 'acpi': add device PNP0200:00 [ 0.229023] PM: Adding info for acpi:PNP0200:00 [ 0.229107] device: 'PNP0100:00': device_add [ 0.229113] bus: 'acpi': add device PNP0100:00 [ 0.229128] PM: Adding info for acpi:PNP0100:00 [ 0.229210] device: 'PNP0B00:00': device_add [ 0.229216] bus: 'acpi': add device PNP0B00:00 [ 0.229227] PM: Adding info for acpi:PNP0B00:00 [ 0.229302] device: 'PNP0800:00': device_add [ 0.229308] bus: 'acpi': add device PNP0800:00 [ 0.229318] PM: Adding info for acpi:PNP0800:00 [ 0.229458] device: 'PNP0C02:02': device_add [ 0.229470] bus: 'acpi': add device PNP0C02:02 [ 0.229482] PM: Adding info for acpi:PNP0C02:02 [ 0.229578] device: 'PNP0C04:00': device_add [ 0.229585] bus: 'acpi': add device PNP0C04:00 [ 0.229597] PM: Adding info for acpi:PNP0C04:00 [ 0.229716] device: 'MSF0001:00': device_add [ 0.229724] bus: 'acpi': add device MSF0001:00 [ 0.229740] PM: Adding info for acpi:MSF0001:00 [ 0.229970] device: 'ETD0B00:00': device_add [ 0.229978] bus: 'acpi': add device ETD0B00:00 [ 0.229991] PM: Adding info for acpi:ETD0B00:00 [ 0.230291] device: 'PNP0C31:00': device_add [ 0.230299] bus: 'acpi': add device PNP0C31:00 [ 0.230316] PM: Adding info for acpi:PNP0C31:00 [ 0.230481] device: 'PNP0C09:00': device_add [ 0.230489] bus: 'acpi': add device PNP0C09:00 [ 0.230502] PM: Adding info for acpi:PNP0C09:00 [ 0.231244] device: 'PNP0C02:03': device_add [ 0.231252] bus: 'acpi': add device PNP0C02:03 [ 0.231270] PM: Adding info for acpi:PNP0C02:03 [ 0.231360] device: 'device:12': device_add [ 0.231367] bus: 'acpi': add device device:12 [ 0.231380] PM: Adding info for acpi:device:12 [ 0.231574] device: 'device:13': device_add [ 0.231582] bus: 'acpi': add device device:13 [ 0.231602] PM: Adding info for acpi:device:13 [ 0.231883] device: 'device:14': device_add [ 0.231891] bus: 'acpi': add device device:14 [ 0.231905] PM: Adding info for acpi:device:14 [ 0.232122] device: 'device:15': device_add [ 0.232130] bus: 'acpi': add device device:15 [ 0.232143] PM: Adding info for acpi:device:15 [ 0.232299] device: 'device:16': device_add [ 0.232307] bus: 'acpi': add device device:16 [ 0.232321] PM: Adding info for acpi:device:16 [ 0.232523] device: 'device:17': device_add [ 0.232531] bus: 'acpi': add device device:17 [ 0.232544] PM: Adding info for acpi:device:17 [ 0.232749] device: 'device:18': device_add [ 0.232757] bus: 'acpi': add device device:18 [ 0.232774] PM: Adding info for acpi:device:18 [ 0.233081] device: 'device:19': device_add [ 0.233089] bus: 'acpi': add device device:19 [ 0.233102] PM: Adding info for acpi:device:19 [ 0.233185] device: 'device:1a': device_add [ 0.233192] bus: 'acpi': add device device:1a [ 0.233210] PM: Adding info for acpi:device:1a [ 0.233286] device: 'device:1b': device_add [ 0.233292] bus: 'acpi': add device device:1b [ 0.233305] PM: Adding info for acpi:device:1b [ 0.233382] device: 'device:1c': device_add [ 0.233389] bus: 'acpi': add device device:1c [ 0.233402] PM: Adding info for acpi:device:1c [ 0.233478] device: 'device:1d': device_add [ 0.233489] bus: 'acpi': add device device:1d [ 0.233502] PM: Adding info for acpi:device:1d [ 0.233578] device: 'device:1e': device_add [ 0.233585] bus: 'acpi': add device device:1e [ 0.233601] PM: Adding info for acpi:device:1e [ 0.233876] device: 'device:1f': device_add [ 0.233884] bus: 'acpi': add device device:1f [ 0.233905] PM: Adding info for acpi:device:1f [ 0.233988] device: 'device:20': device_add [ 0.234006] bus: 'acpi': add device device:20 [ 0.234020] PM: Adding info for acpi:device:20 [ 0.234096] device: 'device:21': device_add [ 0.234103] bus: 'acpi': add device device:21 [ 0.234115] PM: Adding info for acpi:device:21 [ 0.234192] device: 'device:22': device_add [ 0.234202] bus: 'acpi': add device device:22 [ 0.234215] PM: Adding info for acpi:device:22 [ 0.234292] device: 'device:23': device_add [ 0.234299] bus: 'acpi': add device device:23 [ 0.234312] PM: Adding info for acpi:device:23 [ 0.234388] device: 'device:24': device_add [ 0.234395] bus: 'acpi': add device device:24 [ 0.234412] PM: Adding info for acpi:device:24 [ 0.234489] device: 'device:25': device_add [ 0.234496] bus: 'acpi': add device device:25 [ 0.234508] PM: Adding info for acpi:device:25 [ 0.234841] device: 'device:26': device_add [ 0.234849] bus: 'acpi': add device device:26 [ 0.234862] PM: Adding info for acpi:device:26 [ 0.234942] device: 'device:27': device_add [ 0.234953] bus: 'acpi': add device device:27 [ 0.234966] PM: Adding info for acpi:device:27 [ 0.235057] device: 'device:28': device_add [ 0.235064] bus: 'acpi': add device device:28 [ 0.235077] PM: Adding info for acpi:device:28 [ 0.235157] device: 'device:29': device_add [ 0.235164] bus: 'acpi': add device device:29 [ 0.235180] PM: Adding info for acpi:device:29 [ 0.235526] device: 'device:2a': device_add [ 0.235534] bus: 'acpi': add device device:2a [ 0.235547] PM: Adding info for acpi:device:2a [ 0.235634] device: 'device:2b': device_add [ 0.235641] bus: 'acpi': add device device:2b [ 0.235653] PM: Adding info for acpi:device:2b [ 0.235728] device: 'device:2c': device_add [ 0.235739] bus: 'acpi': add device device:2c [ 0.235752] PM: Adding info for acpi:device:2c [ 0.235829] device: 'device:2d': device_add [ 0.235835] bus: 'acpi': add device device:2d [ 0.235848] PM: Adding info for acpi:device:2d [ 0.235924] device: 'device:2e': device_add [ 0.235931] bus: 'acpi': add device device:2e [ 0.235949] PM: Adding info for acpi:device:2e [ 0.236037] device: 'device:2f': device_add [ 0.236045] bus: 'acpi': add device device:2f [ 0.236057] PM: Adding info for acpi:device:2f [ 0.236402] device: 'device:30': device_add [ 0.236410] bus: 'acpi': add device device:30 [ 0.236423] PM: Adding info for acpi:device:30 [ 0.236509] device: 'device:31': device_add [ 0.236520] bus: 'acpi': add device device:31 [ 0.236533] PM: Adding info for acpi:device:31 [ 0.236609] device: 'device:32': device_add [ 0.236615] bus: 'acpi': add device device:32 [ 0.236628] PM: Adding info for acpi:device:32 [ 0.236704] device: 'device:33': device_add [ 0.236710] bus: 'acpi': add device device:33 [ 0.236728] PM: Adding info for acpi:device:33 [ 0.236805] device: 'device:34': device_add [ 0.236812] bus: 'acpi': add device device:34 [ 0.236824] PM: Adding info for acpi:device:34 [ 0.236901] device: 'device:35': device_add [ 0.236908] bus: 'acpi': add device device:35 [ 0.236921] PM: Adding info for acpi:device:35 [ 0.237008] device: 'device:36': device_add [ 0.237019] bus: 'acpi': add device device:36 [ 0.237032] PM: Adding info for acpi:device:36 [ 0.237288] device: 'device:37': device_add [ 0.237296] bus: 'acpi': add device device:37 [ 0.237309] PM: Adding info for acpi:device:37 [ 0.237390] device: 'device:38': device_add [ 0.237397] bus: 'acpi': add device device:38 [ 0.237414] PM: Adding info for acpi:device:38 [ 0.237490] device: 'device:39': device_add [ 0.237497] bus: 'acpi': add device device:39 [ 0.237509] PM: Adding info for acpi:device:39 [ 0.237585] device: 'device:3a': device_add [ 0.237592] bus: 'acpi': add device device:3a [ 0.237604] PM: Adding info for acpi:device:3a [ 0.237954] device: 'device:3b': device_add [ 0.237965] bus: 'acpi': add device device:3b [ 0.237978] PM: Adding info for acpi:device:3b [ 0.238077] device: 'device:3c': device_add [ 0.238085] bus: 'acpi': add device device:3c [ 0.238098] PM: Adding info for acpi:device:3c [ 0.238173] device: 'device:3d': device_add [ 0.238179] bus: 'acpi': add device device:3d [ 0.238196] PM: Adding info for acpi:device:3d [ 0.238276] device: 'device:3e': device_add [ 0.238283] bus: 'acpi': add device device:3e [ 0.238296] PM: Adding info for acpi:device:3e [ 0.238401] device: 'LNXVIDEO:01': device_add [ 0.238409] bus: 'acpi': add device LNXVIDEO:01 [ 0.238422] PM: Adding info for acpi:LNXVIDEO:01 [ 0.238521] device: 'device:3f': device_add [ 0.238528] bus: 'acpi': add device device:3f [ 0.238541] PM: Adding info for acpi:device:3f [ 0.238687] device: 'PNP0C14:00': device_add [ 0.238694] bus: 'acpi': add device PNP0C14:00 [ 0.238707] PM: Adding info for acpi:PNP0C14:00 [ 0.238812] device: 'PNP0C02:04': device_add [ 0.238824] bus: 'acpi': add device PNP0C02:04 [ 0.238837] PM: Adding info for acpi:PNP0C02:04 [ 0.238938] device: 'PNP0C0C:00': device_add [ 0.238946] bus: 'acpi': add device PNP0C0C:00 [ 0.238959] PM: Adding info for acpi:PNP0C0C:00 [ 0.239200] device: 'PNP0C0F:00': device_add [ 0.239208] bus: 'acpi': add device PNP0C0F:00 [ 0.239225] PM: Adding info for acpi:PNP0C0F:00 [ 0.239408] device: 'PNP0C0F:01': device_add [ 0.239416] bus: 'acpi': add device PNP0C0F:01 [ 0.239429] PM: Adding info for acpi:PNP0C0F:01 [ 0.239598] device: 'PNP0C0F:02': device_add [ 0.239605] bus: 'acpi': add device PNP0C0F:02 [ 0.239619] PM: Adding info for acpi:PNP0C0F:02 [ 0.239776] device: 'PNP0C0F:03': device_add [ 0.239782] bus: 'acpi': add device PNP0C0F:03 [ 0.239794] PM: Adding info for acpi:PNP0C0F:03 [ 0.239954] device: 'PNP0C0F:04': device_add [ 0.239961] bus: 'acpi': add device PNP0C0F:04 [ 0.239976] PM: Adding info for acpi:PNP0C0F:04 [ 0.240141] device: 'PNP0C0F:05': device_add [ 0.240148] bus: 'acpi': add device PNP0C0F:05 [ 0.240159] PM: Adding info for acpi:PNP0C0F:05 [ 0.240312] device: 'PNP0C0F:06': device_add [ 0.240319] bus: 'acpi': add device PNP0C0F:06 [ 0.240334] PM: Adding info for acpi:PNP0C0F:06 [ 0.240488] device: 'PNP0C0F:07': device_add [ 0.240495] bus: 'acpi': add device PNP0C0F:07 [ 0.240507] PM: Adding info for acpi:PNP0C0F:07 [ 0.240588] device: 'PNP0C01:01': device_add [ 0.240594] bus: 'acpi': add device PNP0C01:01 [ 0.240609] PM: Adding info for acpi:PNP0C01:01 [ 0.240691] device: 'PNP0C0D:00': device_add [ 0.240697] bus: 'acpi': add device PNP0C0D:00 [ 0.240708] PM: Adding info for acpi:PNP0C0D:00 [ 0.240821] device: 'SAM0714:00': device_add [ 0.240828] bus: 'acpi': add device SAM0714:00 [ 0.240843] PM: Adding info for acpi:SAM0714:00 [ 0.240981] device: 'ACPI0003:00': device_add [ 0.240988] bus: 'acpi': add device ACPI0003:00 [ 0.241009] PM: Adding info for acpi:ACPI0003:00 [ 0.241090] device: 'PNP0C0A:00': device_add [ 0.241096] bus: 'acpi': add device PNP0C0A:00 [ 0.241112] PM: Adding info for acpi:PNP0C0A:00 [ 0.241290] device: 'PNP0C02:05': device_add [ 0.241296] bus: 'acpi': add device PNP0C02:05 [ 0.241307] PM: Adding info for acpi:PNP0C02:05 [ 0.241392] device: 'PNP0C02:06': device_add [ 0.241398] bus: 'acpi': add device PNP0C02:06 [ 0.241414] PM: Adding info for acpi:PNP0C02:06 [ 0.241566] device: 'PNP0C02:07': device_add [ 0.241572] bus: 'acpi': add device PNP0C02:07 [ 0.241583] PM: Adding info for acpi:PNP0C02:07 [ 0.241732] device: 'PNP0C02:08': device_add [ 0.241738] bus: 'acpi': add device PNP0C02:08 [ 0.241753] PM: Adding info for acpi:PNP0C02:08 [ 0.241899] device: 'PNP0C02:09': device_add [ 0.241905] bus: 'acpi': add device PNP0C02:09 [ 0.241916] PM: Adding info for acpi:PNP0C02:09 [ 0.242071] device: 'PNP0C02:0a': device_add [ 0.242077] bus: 'acpi': add device PNP0C02:0a [ 0.242088] PM: Adding info for acpi:PNP0C02:0a [ 0.242238] device: 'LNXSYBUS:01': device_add [ 0.242244] bus: 'acpi': add device LNXSYBUS:01 [ 0.242255] PM: Adding info for acpi:LNXSYBUS:01 [ 0.242300] device: 'LNXTHERM:00': device_add [ 0.242307] bus: 'acpi': add device LNXTHERM:00 [ 0.242317] PM: Adding info for acpi:LNXTHERM:00 [ 0.242367] device: 'LNXTHERM:01': device_add [ 0.242380] bus: 'acpi': add device LNXTHERM:01 [ 0.242392] PM: Adding info for acpi:LNXTHERM:01 [ 0.242808] device: 'PNP0103:00': device_add [ 0.242815] bus: 'acpi': add device PNP0103:00 [ 0.242826] PM: Adding info for acpi:PNP0103:00 [ 0.242911] device: 'PNP0C02:0b': device_add [ 0.242918] bus: 'acpi': add device PNP0C02:0b [ 0.242933] PM: Adding info for acpi:PNP0C02:0b [ 0.243584] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.243599] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.244198] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.244202] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.244535] device: 'pci0000:00': device_add [ 0.244552] PM: Adding info for No Bus:pci0000:00 [ 0.244559] device: '0000:00': device_add [ 0.244584] PM: Adding info for No Bus:0000:00 [ 0.244730] PCI host bridge to bus 0000:00 [ 0.244736] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.244740] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.244744] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.244748] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.244752] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.244756] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.244760] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] [ 0.244765] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.244784] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000 [ 0.244855] device: '0000:00:00.0': device_add [ 0.244953] bus: 'pci': add device 0000:00:00.0 [ 0.244990] PM: Adding info for pci:0000:00:00.0 [ 0.245041] pci 0000:00:01.0: [1002:983d] type 00 class 0x030000 [ 0.245069] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.245084] pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref] [ 0.245095] pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff] [ 0.245106] pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff] [ 0.245117] pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref] [ 0.245124] pci 0000:00:01.0: enabling Extended Tags [ 0.245144] pci 0000:00:01.0: BAR 0: assigned to efifb [ 0.245189] pci 0000:00:01.0: supports D1 D2 [ 0.245193] pci 0000:00:01.0: PME# supported from D1 D2 D3hot [ 0.245220] device: '0000:00:01.0': device_add [ 0.245320] bus: 'pci': add device 0000:00:01.0 [ 0.245371] PM: Adding info for pci:0000:00:01.0 [ 0.245402] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300 [ 0.245428] pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit] [ 0.245468] pci 0000:00:01.1: enabling Extended Tags [ 0.245522] pci 0000:00:01.1: supports D1 D2 [ 0.245544] device: '0000:00:01.1': device_add [ 0.245632] bus: 'pci': add device 0000:00:01.1 [ 0.245668] PM: Adding info for pci:0000:00:01.1 [ 0.245703] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000 [ 0.245763] device: '0000:00:02.0': device_add [ 0.245847] bus: 'pci': add device 0000:00:02.0 [ 0.245882] PM: Adding info for pci:0000:00:02.0 [ 0.245915] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400 [ 0.245966] pci 0000:00:02.3: enabling Extended Tags [ 0.246036] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold [ 0.246065] device: '0000:00:02.3': device_add [ 0.246164] bus: 'pci': add device 0000:00:02.3 [ 0.246215] PM: Adding info for pci:0000:00:02.3 [ 0.246245] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400 [ 0.246296] pci 0000:00:02.4: enabling Extended Tags [ 0.246357] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold [ 0.246385] device: '0000:00:02.4': device_add [ 0.246484] bus: 'pci': add device 0000:00:02.4 [ 0.246532] PM: Adding info for pci:0000:00:02.4 [ 0.246588] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330 [ 0.246621] pci 0000:00:10.0: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit] [ 0.246741] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold [ 0.246777] device: '0000:00:10.0': device_add [ 0.246880] bus: 'pci': add device 0000:00:10.0 [ 0.246926] PM: Adding info for pci:0000:00:10.0 [ 0.246966] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601 [ 0.246994] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147] [ 0.247015] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133] [ 0.247027] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127] [ 0.247039] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113] [ 0.247050] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f] [ 0.247062] pci 0000:00:11.0: reg 0x24: [mem 0xfeb6e000-0xfeb6e3ff] [ 0.247126] pci 0000:00:11.0: PME# supported from D3hot [ 0.247149] device: '0000:00:11.0': device_add [ 0.247241] bus: 'pci': add device 0000:00:11.0 [ 0.247287] PM: Adding info for pci:0000:00:11.0 [ 0.247312] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310 [ 0.247334] pci 0000:00:12.0: reg 0x10: [mem 0xfeb6d000-0xfeb6dfff] [ 0.247407] device: '0000:00:12.0': device_add [ 0.247503] bus: 'pci': add device 0000:00:12.0 [ 0.247550] PM: Adding info for pci:0000:00:12.0 [ 0.247580] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320 [ 0.247605] pci 0000:00:12.2: reg 0x10: [mem 0xfeb6c000-0xfeb6c0ff] [ 0.247695] pci 0000:00:12.2: supports D1 D2 [ 0.247698] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.247716] device: '0000:00:12.2': device_add [ 0.247808] bus: 'pci': add device 0000:00:12.2 [ 0.247854] PM: Adding info for pci:0000:00:12.2 [ 0.247886] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310 [ 0.247906] pci 0000:00:13.0: reg 0x10: [mem 0xfeb6b000-0xfeb6bfff] [ 0.247965] device: '0000:00:13.0': device_add [ 0.248069] bus: 'pci': add device 0000:00:13.0 [ 0.248118] PM: Adding info for pci:0000:00:13.0 [ 0.248151] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320 [ 0.248176] pci 0000:00:13.2: reg 0x10: [mem 0xfeb6a000-0xfeb6a0ff] [ 0.248265] pci 0000:00:13.2: supports D1 D2 [ 0.248269] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.248287] device: '0000:00:13.2': device_add [ 0.248379] bus: 'pci': add device 0000:00:13.2 [ 0.248425] PM: Adding info for pci:0000:00:13.2 [ 0.248457] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 [ 0.248544] device: '0000:00:14.0': device_add [ 0.248627] bus: 'pci': add device 0000:00:14.0 [ 0.248662] PM: Adding info for pci:0000:00:14.0 [ 0.248690] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 [ 0.248719] pci 0000:00:14.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff 64bit] [ 0.248795] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.248810] device: '0000:00:14.2': device_add [ 0.248903] bus: 'pci': add device 0000:00:14.2 [ 0.248951] PM: Adding info for pci:0000:00:14.2 [ 0.248976] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 [ 0.249076] device: '0000:00:14.3': device_add [ 0.249168] bus: 'pci': add device 0000:00:14.3 [ 0.249203] PM: Adding info for pci:0000:00:14.3 [ 0.249238] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000 [ 0.249286] device: '0000:00:18.0': device_add [ 0.249369] bus: 'pci': add device 0000:00:18.0 [ 0.249405] PM: Adding info for pci:0000:00:18.0 [ 0.249427] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000 [ 0.249470] device: '0000:00:18.1': device_add [ 0.249571] bus: 'pci': add device 0000:00:18.1 [ 0.249612] PM: Adding info for pci:0000:00:18.1 [ 0.249638] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000 [ 0.249686] device: '0000:00:18.2': device_add [ 0.249783] bus: 'pci': add device 0000:00:18.2 [ 0.249824] PM: Adding info for pci:0000:00:18.2 [ 0.249851] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000 [ 0.249908] device: '0000:00:18.3': device_add [ 0.250017] bus: 'pci': add device 0000:00:18.3 [ 0.250056] PM: Adding info for pci:0000:00:18.3 [ 0.250085] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000 [ 0.250136] device: '0000:00:18.4': device_add [ 0.250233] bus: 'pci': add device 0000:00:18.4 [ 0.250274] PM: Adding info for pci:0000:00:18.4 [ 0.250299] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000 [ 0.250346] device: '0000:00:18.5': device_add [ 0.250443] bus: 'pci': add device 0000:00:18.5 [ 0.250485] PM: Adding info for pci:0000:00:18.5 [ 0.250561] device: '0000:01': device_add [ 0.250589] PM: Adding info for No Bus:0000:01 [ 0.250653] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 0.250714] pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.250752] pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea00fff 64bit] [ 0.250779] pci 0000:01:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref] [ 0.250959] pci 0000:01:00.0: supports D1 D2 [ 0.250963] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.251063] device: '0000:01:00.0': device_add [ 0.251100] bus: 'pci': add device 0000:01:00.0 [ 0.251154] PM: Adding info for pci:0000:01:00.0 [ 0.251246] pci 0000:00:02.3: PCI bridge to [bus 01] [ 0.251256] pci 0000:00:02.3: bridge window [io 0xe000-0xefff] [ 0.251262] pci 0000:00:02.3: bridge window [mem 0xfea00000-0xfeafffff] [ 0.251272] pci 0000:00:02.3: bridge window [mem 0xd0800000-0xd08fffff 64bit pref] [ 0.251316] device: '0000:02': device_add [ 0.251345] PM: Adding info for No Bus:0000:02 [ 0.251379] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000 [ 0.251418] pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe97ffff 64bit] [ 0.251462] pci 0000:02:00.0: reg 0x30: [mem 0xfe980000-0xfe98ffff pref] [ 0.251556] pci 0000:02:00.0: supports D1 D2 [ 0.251560] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.251607] device: '0000:02:00.0': device_add [ 0.251624] bus: 'pci': add device 0000:02:00.0 [ 0.251677] PM: Adding info for pci:0000:02:00.0 [ 0.251728] pci 0000:00:02.4: PCI bridge to [bus 02] [ 0.251739] pci 0000:00:02.4: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.251954] Registering platform device 'PNP0800:00'. Parent at 0000:00:14.3 [ 0.251957] device: 'PNP0800:00': device_add [ 0.251974] bus: 'platform': add device PNP0800:00 [ 0.251991] PM: Adding info for platform:PNP0800:00 [ 0.252073] Registering platform device 'PNP0C04:00'. Parent at 0000:00:14.3 [ 0.252076] device: 'PNP0C04:00': device_add [ 0.252086] bus: 'platform': add device PNP0C04:00 [ 0.252102] PM: Adding info for platform:PNP0C04:00 [ 0.252306] Registering platform device 'PNP0C09:00'. Parent at 0000:00:14.3 [ 0.252309] device: 'PNP0C09:00': device_add [ 0.252320] bus: 'platform': add device PNP0C09:00 [ 0.252340] PM: Adding info for platform:PNP0C09:00 [ 0.252692] Registering platform device 'PNP0C14:00'. Parent at pci0000:00 [ 0.252695] device: 'PNP0C14:00': device_add [ 0.252706] bus: 'platform': add device PNP0C14:00 [ 0.252721] PM: Adding info for platform:PNP0C14:00 [ 0.252776] Registering platform device 'PNP0C0C:00'. Parent at platform [ 0.252779] device: 'PNP0C0C:00': device_add [ 0.252790] bus: 'platform': add device PNP0C0C:00 [ 0.252809] PM: Adding info for platform:PNP0C0C:00 [ 0.252944] ACPI: PCI Interrupt Link [LNKA] (IRQs *4 5 7 10 11 14 15) [ 0.253158] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 *10 11 14 15) [ 0.253361] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 *5 7 10 11 14 15) [ 0.253562] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 *11 14 15) [ 0.253732] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 *11 14 15) [ 0.253871] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 *10 11 14 15) [ 0.254025] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 0.254167] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 0.254226] Registering platform device 'PNP0C0D:00'. Parent at platform [ 0.254229] device: 'PNP0C0D:00': device_add [ 0.254240] bus: 'platform': add device PNP0C0D:00 [ 0.254256] PM: Adding info for platform:PNP0C0D:00 [ 0.254332] Registering platform device 'SAM0714:00'. Parent at platform [ 0.254334] device: 'SAM0714:00': device_add [ 0.254345] bus: 'platform': add device SAM0714:00 [ 0.254365] PM: Adding info for platform:SAM0714:00 [ 0.254469] Registering platform device 'ACPI0003:00'. Parent at platform [ 0.254472] device: 'ACPI0003:00': device_add [ 0.254483] bus: 'platform': add device ACPI0003:00 [ 0.254498] PM: Adding info for platform:ACPI0003:00 [ 0.255014] Registering platform device 'PNP0C0A:00'. Parent at platform [ 0.255017] device: 'PNP0C0A:00': device_add [ 0.255028] bus: 'platform': add device PNP0C0A:00 [ 0.255048] PM: Adding info for platform:PNP0C0A:00 [ 0.255257] Registering platform device 'PNP0103:00'. Parent at platform [ 0.255261] device: 'PNP0103:00': device_add [ 0.255271] bus: 'platform': add device PNP0103:00 [ 0.255287] PM: Adding info for platform:PNP0103:00 [ 0.255322] device: 'LNXPWRBN:00': device_add [ 0.255330] bus: 'acpi': add device LNXPWRBN:00 [ 0.255343] PM: Adding info for acpi:LNXPWRBN:00 [ 0.255429] bus: 'acpi': add driver ec [ 0.255452] bus: 'acpi': driver_probe_device: matched device PNP0C09:00 with driver ec [ 0.255458] bus: 'acpi': really_probe: probing driver ec with device PNP0C09:00 [ 0.255468] ec PNP0C09:00: no default pinctrl state [ 0.255479] devices_kset: Moving PNP0C09:00 to end of list [ 0.255588] ACPI: EC: interrupt unblocked [ 0.255607] ACPI: EC: event unblocked [ 0.255618] ACPI: \_SB_.PCI0.SBRG.H_EC: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.255623] ACPI: \_SB_.PCI0.SBRG.H_EC: Used as boot DSDT EC to handle transactions and events [ 0.255630] driver: 'ec': driver_bound: bound to device 'PNP0C09:00' [ 0.255642] bus: 'acpi': really_probe: bound device PNP0C09:00 to driver ec [ 0.255707] bus: 'pnp': registered [ 0.255713] device class 'misc': registering [ 0.255763] bus: 'nd': registered [ 0.255768] device class 'nd': registering [ 0.255777] bus: 'nd': add driver nd_bus [ 0.255797] bus: 'nd': add driver nvdimm [ 0.255811] bus: 'nd': add driver nd_region [ 0.255973] device class 'scsi_host': registering [ 0.256019] bus: 'scsi': registered [ 0.256022] device class 'scsi_device': registering [ 0.256030] SCSI subsystem initialized [ 0.256149] device class 'ata_link': registering [ 0.256149] device class 'ata_port': registering [ 0.256149] device class 'ata_device': registering [ 0.256149] libata version 3.00 loaded. [ 0.256149] device class 'mdio_bus': registering [ 0.256149] bus: 'mdio_bus': registered [ 0.256149] bus: 'mdio_bus': add driver Generic 10G PHY [ 0.256149] bus: 'mdio_bus': add driver Generic PHY [ 0.256149] ACPI: bus type USB registered [ 0.256149] bus: 'usb': registered [ 0.256149] bus: 'usb': add driver usbfs [ 0.256161] usbcore: registered new interface driver usbfs [ 0.256166] bus: 'usb': add driver hub [ 0.256185] usbcore: registered new interface driver hub [ 0.256219] bus: 'usb': add driver usb [ 0.256237] usbcore: registered new device driver usb [ 0.256253] bus: 'serio': registered [ 0.256256] device class 'input': registering [ 0.256270] device class 'rtc': registering [ 0.256279] device class 'power_supply': registering [ 0.256292] device class 'hwmon': registering [ 0.256300] EDAC MC: Ver: 3.0.0 [ 0.256314] bus: 'edac': registered [ 0.256318] device: 'edac': device_add [ 0.256334] PM: Adding info for No Bus:edac [ 0.256403] device: 'mc': device_add [ 0.256409] bus: 'edac': add device mc [ 0.256426] PM: Adding info for edac:mc [ 0.256455] device class 'leds': registering [ 0.256455] Registered efivars operations [ 0.259981] device class 'devfreq': registering [ 0.260047] device class 'devfreq-event': registering [ 0.260047] bus: 'nvmem': registered [ 0.260047] device class 'sound': registering [ 0.260069] Advanced Linux Sound Architecture Driver Initialized. [ 0.260083] bus: 'hdaudio': registered [ 0.260086] PCI: Using ACPI for IRQ routing [ 0.268847] PCI: pci_cache_line_size set to 64 bytes [ 0.268923] e820: reserve RAM buffer [mem 0x6a438018-0x6bffffff] [ 0.268927] e820: reserve RAM buffer [mem 0x6a446018-0x6bffffff] [ 0.268930] e820: reserve RAM buffer [mem 0x9d56f000-0x9fffffff] [ 0.268934] e820: reserve RAM buffer [mem 0x9e73c000-0x9fffffff] [ 0.268937] e820: reserve RAM buffer [mem 0x9e898000-0x9fffffff] [ 0.268940] e820: reserve RAM buffer [mem 0x9ed11000-0x9fffffff] [ 0.268943] e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff] [ 0.268946] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff] [ 0.268961] device class 'net': registering [ 0.268994] device: 'lo': device_add [ 0.269084] PM: Adding info for No Bus:lo [ 0.269219] NetLabel: Initializing [ 0.269222] NetLabel: domain hash size = 128 [ 0.269223] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.269262] NetLabel: unlabeled traffic allowed by default [ 0.270024] device class 'watchdog': registering [ 0.270197] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.270207] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.272116] clocksource: Switched to clocksource tsc-early [ 0.272261] VFS: Disk quotas dquot_6.6.0 [ 0.272300] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.272428] bus: 'pnp': add driver system [ 0.272447] pnp: PnP ACPI init [ 0.272453] device: 'pnp0': device_add [ 0.272469] PM: Adding info for No Bus:pnp0 [ 0.272586] device: '00:00': device_add [ 0.272599] bus: 'pnp': add device 00:00 [ 0.272617] PM: Adding info for pnp:00:00 [ 0.272629] bus: 'pnp': driver_probe_device: matched device 00:00 with driver system [ 0.272634] bus: 'pnp': really_probe: probing driver system with device 00:00 [ 0.272640] system 00:00: no default pinctrl state [ 0.272653] devices_kset: Moving 00:00 to end of list [ 0.272662] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.272665] driver: 'system': driver_bound: bound to device '00:00' [ 0.272674] bus: 'pnp': really_probe: bound device 00:00 to driver system [ 0.272684] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.272825] device: '00:01': device_add [ 0.272838] bus: 'pnp': add device 00:01 [ 0.272856] PM: Adding info for pnp:00:01 [ 0.272866] bus: 'pnp': driver_probe_device: matched device 00:01 with driver system [ 0.272869] bus: 'pnp': really_probe: probing driver system with device 00:01 [ 0.272874] system 00:01: no default pinctrl state [ 0.272881] devices_kset: Moving 00:01 to end of list [ 0.272888] system 00:01: [mem 0xa0000000-0xbfffffff] has been reserved [ 0.272891] driver: 'system': driver_bound: bound to device '00:01' [ 0.272899] bus: 'pnp': really_probe: bound device 00:01 to driver system [ 0.272907] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.273033] device: '00:02': device_add [ 0.273046] bus: 'pnp': add device 00:02 [ 0.273068] PM: Adding info for pnp:00:02 [ 0.273078] bus: 'pnp': driver_probe_device: matched device 00:02 with driver system [ 0.273082] bus: 'pnp': really_probe: probing driver system with device 00:02 [ 0.273087] system 00:02: no default pinctrl state [ 0.273093] devices_kset: Moving 00:02 to end of list [ 0.273097] driver: 'system': driver_bound: bound to device '00:02' [ 0.273104] bus: 'pnp': really_probe: bound device 00:02 to driver system [ 0.273112] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.273155] device: '00:03': device_add [ 0.273167] bus: 'pnp': add device 00:03 [ 0.273184] PM: Adding info for pnp:00:03 [ 0.273197] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.273320] device: '00:04': device_add [ 0.273333] bus: 'pnp': add device 00:04 [ 0.273354] PM: Adding info for pnp:00:04 [ 0.273363] bus: 'pnp': driver_probe_device: matched device 00:04 with driver system [ 0.273366] bus: 'pnp': really_probe: probing driver system with device 00:04 [ 0.273371] system 00:04: no default pinctrl state [ 0.273378] devices_kset: Moving 00:04 to end of list [ 0.273386] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.273389] driver: 'system': driver_bound: bound to device '00:04' [ 0.273397] bus: 'pnp': really_probe: bound device 00:04 to driver system [ 0.273405] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.273468] device: '00:05': device_add [ 0.273480] bus: 'pnp': add device 00:05 [ 0.273497] PM: Adding info for pnp:00:05 [ 0.273511] pnp 00:05: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active) [ 0.273606] device: '00:06': device_add [ 0.273619] bus: 'pnp': add device 00:06 [ 0.273641] PM: Adding info for pnp:00:06 [ 0.273656] pnp 00:06: Plug and Play ACPI device, IDs ETD0b00 PNP0f13 PNP0f0e PNP0f03 (active) [ 0.274368] device: '00:07': device_add [ 0.274381] bus: 'pnp': add device 00:07 [ 0.274398] PM: Adding info for pnp:00:07 [ 0.274407] bus: 'pnp': driver_probe_device: matched device 00:07 with driver system [ 0.274411] bus: 'pnp': really_probe: probing driver system with device 00:07 [ 0.274416] system 00:07: no default pinctrl state [ 0.274422] devices_kset: Moving 00:07 to end of list [ 0.274431] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.274436] system 00:07: [io 0x040b] has been reserved [ 0.274441] system 00:07: [io 0x04d6] has been reserved [ 0.274446] system 00:07: [io 0x0c00-0x0c01] has been reserved [ 0.274451] system 00:07: [io 0x0c14] has been reserved [ 0.274465] system 00:07: [io 0x0c50-0x0c51] has been reserved [ 0.274470] system 00:07: [io 0x0c52] has been reserved [ 0.274475] system 00:07: [io 0x0c6c] has been reserved [ 0.274480] system 00:07: [io 0x0c6f] has been reserved [ 0.274485] system 00:07: [io 0x0cd0-0x0cd1] has been reserved [ 0.274490] system 00:07: [io 0x0cd2-0x0cd3] has been reserved [ 0.274495] system 00:07: [io 0x0cd4-0x0cd5] has been reserved [ 0.274500] system 00:07: [io 0x0cd6-0x0cd7] has been reserved [ 0.274504] system 00:07: [io 0x0cd8-0x0cdf] has been reserved [ 0.274509] system 00:07: [io 0x0800-0x089f] has been reserved [ 0.274515] system 00:07: [io 0x0b20-0x0b3f] has been reserved [ 0.274519] system 00:07: [io 0x0900-0x090f] has been reserved [ 0.274524] system 00:07: [io 0x0910-0x091f] has been reserved [ 0.274530] system 00:07: [io 0xfe00-0xfefe] has been reserved [ 0.274537] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.274543] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.274548] system 00:07: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.274554] system 00:07: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.274560] system 00:07: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.274570] system 00:07: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.274576] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.274579] driver: 'system': driver_bound: bound to device '00:07' [ 0.274588] bus: 'pnp': really_probe: bound device 00:07 to driver system [ 0.274596] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.274936] device: '00:08': device_add [ 0.274948] bus: 'pnp': add device 00:08 [ 0.274969] PM: Adding info for pnp:00:08 [ 0.274978] bus: 'pnp': driver_probe_device: matched device 00:08 with driver system [ 0.274982] bus: 'pnp': really_probe: probing driver system with device 00:08 [ 0.274987] system 00:08: no default pinctrl state [ 0.274994] devices_kset: Moving 00:08 to end of list [ 0.275001] system 00:08: [io 0x0a00-0x0a07] has been reserved [ 0.275004] driver: 'system': driver_bound: bound to device '00:08' [ 0.275011] bus: 'pnp': really_probe: bound device 00:08 to driver system [ 0.275019] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.275903] pnp: PnP ACPI: found 9 devices [ 0.275910] device class 'mem': registering [ 0.275922] device: 'mem': device_add [ 0.275941] PM: Adding info for No Bus:mem [ 0.276079] device: 'null': device_add [ 0.276101] PM: Adding info for No Bus:null [ 0.276152] device: 'port': device_add [ 0.276170] PM: Adding info for No Bus:port [ 0.276216] device: 'zero': device_add [ 0.276233] PM: Adding info for No Bus:zero [ 0.276287] device: 'full': device_add [ 0.276304] PM: Adding info for No Bus:full [ 0.276350] device: 'random': device_add [ 0.276367] PM: Adding info for No Bus:random [ 0.276418] device: 'urandom': device_add [ 0.276438] PM: Adding info for No Bus:urandom [ 0.276486] device: 'kmsg': device_add [ 0.276504] PM: Adding info for No Bus:kmsg [ 0.276553] device: 'tty': device_add [ 0.276578] PM: Adding info for No Bus:tty [ 0.276630] device: 'console': device_add [ 0.276649] PM: Adding info for No Bus:console [ 0.276698] device: 'tty0': device_add [ 0.276716] PM: Adding info for No Bus:tty0 [ 0.276763] device class 'vc': registering [ 0.276774] device: 'vcs': device_add [ 0.276795] PM: Adding info for No Bus:vcs [ 0.276842] device: 'vcsa': device_add [ 0.276859] PM: Adding info for No Bus:vcsa [ 0.276905] device: 'vcs1': device_add [ 0.276926] PM: Adding info for No Bus:vcs1 [ 0.276973] device: 'vcsa1': device_add [ 0.276990] PM: Adding info for No Bus:vcsa1 [ 0.277042] device: 'tty1': device_add [ 0.277059] PM: Adding info for No Bus:tty1 [ 0.277111] device: 'tty2': device_add [ 0.277128] PM: Adding info for No Bus:tty2 [ 0.277175] device: 'tty3': device_add [ 0.277193] PM: Adding info for No Bus:tty3 [ 0.277248] device: 'tty4': device_add [ 0.277272] PM: Adding info for No Bus:tty4 [ 0.277320] device: 'tty5': device_add [ 0.277338] PM: Adding info for No Bus:tty5 [ 0.277384] device: 'tty6': device_add [ 0.277401] PM: Adding info for No Bus:tty6 [ 0.277460] device: 'tty7': device_add [ 0.277478] PM: Adding info for No Bus:tty7 [ 0.277532] device: 'tty8': device_add [ 0.277550] PM: Adding info for No Bus:tty8 [ 0.277598] device: 'tty9': device_add [ 0.277619] PM: Adding info for No Bus:tty9 [ 0.277677] device: 'tty10': device_add [ 0.277694] PM: Adding info for No Bus:tty10 [ 0.277742] device: 'tty11': device_add [ 0.277759] PM: Adding info for No Bus:tty11 [ 0.277811] device: 'tty12': device_add [ 0.277828] PM: Adding info for No Bus:tty12 [ 0.277875] device: 'tty13': device_add [ 0.277892] PM: Adding info for No Bus:tty13 [ 0.277940] device: 'tty14': device_add [ 0.277962] PM: Adding info for No Bus:tty14 [ 0.278011] device: 'tty15': device_add [ 0.278029] PM: Adding info for No Bus:tty15 [ 0.278076] device: 'tty16': device_add [ 0.278092] PM: Adding info for No Bus:tty16 [ 0.278143] device: 'tty17': device_add [ 0.278160] PM: Adding info for No Bus:tty17 [ 0.278211] device: 'tty18': device_add [ 0.278228] PM: Adding info for No Bus:tty18 [ 0.278276] device: 'tty19': device_add [ 0.278298] PM: Adding info for No Bus:tty19 [ 0.278345] device: 'tty20': device_add [ 0.278362] PM: Adding info for No Bus:tty20 [ 0.278408] device: 'tty21': device_add [ 0.278425] PM: Adding info for No Bus:tty21 [ 0.278476] device: 'tty22': device_add [ 0.278494] PM: Adding info for No Bus:tty22 [ 0.278542] device: 'tty23': device_add [ 0.278559] PM: Adding info for No Bus:tty23 [ 0.278609] device: 'tty24': device_add [ 0.278631] PM: Adding info for No Bus:tty24 [ 0.278679] device: 'tty25': device_add [ 0.278696] PM: Adding info for No Bus:tty25 [ 0.278746] device: 'tty26': device_add [ 0.278763] PM: Adding info for No Bus:tty26 [ 0.278814] device: 'tty27': device_add [ 0.278831] PM: Adding info for No Bus:tty27 [ 0.278878] device: 'tty28': device_add [ 0.278895] PM: Adding info for No Bus:tty28 [ 0.278945] device: 'tty29': device_add [ 0.278966] PM: Adding info for No Bus:tty29 [ 0.279014] device: 'tty30': device_add [ 0.279032] PM: Adding info for No Bus:tty30 [ 0.279077] device: 'tty31': device_add [ 0.279094] PM: Adding info for No Bus:tty31 [ 0.279145] device: 'tty32': device_add [ 0.279162] PM: Adding info for No Bus:tty32 [ 0.279219] device: 'tty33': device_add [ 0.279236] PM: Adding info for No Bus:tty33 [ 0.279284] device: 'tty34': device_add [ 0.279305] PM: Adding info for No Bus:tty34 [ 0.279352] device: 'tty35': device_add [ 0.279370] PM: Adding info for No Bus:tty35 [ 0.279419] device: 'tty36': device_add [ 0.279436] PM: Adding info for No Bus:tty36 [ 0.279487] device: 'tty37': device_add [ 0.279505] PM: Adding info for No Bus:tty37 [ 0.279551] device: 'tty38': device_add [ 0.279568] PM: Adding info for No Bus:tty38 [ 0.279614] device: 'tty39': device_add [ 0.279636] PM: Adding info for No Bus:tty39 [ 0.279686] device: 'tty40': device_add [ 0.279704] PM: Adding info for No Bus:tty40 [ 0.279751] device: 'tty41': device_add [ 0.279769] PM: Adding info for No Bus:tty41 [ 0.279820] device: 'tty42': device_add [ 0.279837] PM: Adding info for No Bus:tty42 [ 0.279884] device: 'tty43': device_add [ 0.279901] PM: Adding info for No Bus:tty43 [ 0.279948] device: 'tty44': device_add [ 0.279970] PM: Adding info for No Bus:tty44 [ 0.280016] device: 'tty45': device_add [ 0.280033] PM: Adding info for No Bus:tty45 [ 0.280081] device: 'tty46': device_add [ 0.280098] PM: Adding info for No Bus:tty46 [ 0.280149] device: 'tty47': device_add [ 0.280167] PM: Adding info for No Bus:tty47 [ 0.280213] device: 'tty48': device_add [ 0.280230] PM: Adding info for No Bus:tty48 [ 0.280278] device: 'tty49': device_add [ 0.280299] PM: Adding info for No Bus:tty49 [ 0.280352] device: 'tty50': device_add [ 0.280369] PM: Adding info for No Bus:tty50 [ 0.280415] device: 'tty51': device_add [ 0.280433] PM: Adding info for No Bus:tty51 [ 0.280484] device: 'tty52': device_add [ 0.280502] PM: Adding info for No Bus:tty52 [ 0.280549] device: 'tty53': device_add [ 0.280566] PM: Adding info for No Bus:tty53 [ 0.280612] device: 'tty54': device_add [ 0.280634] PM: Adding info for No Bus:tty54 [ 0.280681] device: 'tty55': device_add [ 0.280698] PM: Adding info for No Bus:tty55 [ 0.280760] device: 'tty56': device_add [ 0.280778] PM: Adding info for No Bus:tty56 [ 0.280832] device: 'tty57': device_add [ 0.280850] PM: Adding info for No Bus:tty57 [ 0.280903] device: 'tty58': device_add [ 0.280920] PM: Adding info for No Bus:tty58 [ 0.280966] device: 'tty59': device_add [ 0.280988] PM: Adding info for No Bus:tty59 [ 0.281035] device: 'tty60': device_add [ 0.281052] PM: Adding info for No Bus:tty60 [ 0.281099] device: 'tty61': device_add [ 0.281116] PM: Adding info for No Bus:tty61 [ 0.281167] device: 'tty62': device_add [ 0.281185] PM: Adding info for No Bus:tty62 [ 0.281231] device: 'tty63': device_add [ 0.281249] PM: Adding info for No Bus:tty63 [ 0.281384] device class 'thermal': registering [ 0.285935] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.285978] pci 0000:00:02.3: PCI bridge to [bus 01] [ 0.285984] pci 0000:00:02.3: bridge window [io 0xe000-0xefff] [ 0.285992] pci 0000:00:02.3: bridge window [mem 0xfea00000-0xfeafffff] [ 0.285998] pci 0000:00:02.3: bridge window [mem 0xd0800000-0xd08fffff 64bit pref] [ 0.286007] pci 0000:00:02.4: PCI bridge to [bus 02] [ 0.286015] pci 0000:00:02.4: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.286028] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.286032] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.286037] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.286040] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.286045] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.286048] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.286053] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window] [ 0.286057] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.286061] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.286065] pci_bus 0000:01: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref] [ 0.286069] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.286275] NET: Registered protocol family 2 [ 0.286651] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes) [ 0.286699] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.286882] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.287081] TCP: Hash tables configured (established 32768 bind 32768) [ 0.287186] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.287225] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.287353] NET: Registered protocol family 1 [ 0.287388] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.287397] devices_kset: Moving 0000:00:01.1 to end of list [ 0.287400] PM: Moving pci:0000:00:01.1 to end of list [ 0.287404] pci 0000:00:01.1: Linked as a consumer to 0000:00:01.0 [ 0.363637] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x690 took 73938 usecs [ 0.364022] pci 0000:00:12.2: PME# does not work under D3, disabling it [ 0.364040] pci 0000:00:13.0: enabling device (0000 -> 0002) [ 0.364820] pci 0000:00:13.2: PME# does not work under D3, disabling it [ 0.364891] PCI: CLS 64 bytes, default 64 [ 0.365046] Unpacking initramfs... [ 1.414813] Freeing initrd memory: 46636K [ 1.414825] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.414832] software IO TLB [mem 0x8ad5e000-0x8ed5e000] (64MB) mapped at [ (ptrval)- (ptrval)] [ 1.415026] amd_uncore: AMD NB counters detected [ 1.415034] amd_uncore: AMD LLC counters detected [ 1.415437] LVT offset 0 assigned for vector 0x400 [ 1.415525] perf: AMD IBS detected (0x000000ff) [ 1.415556] device class 'msr': registering [ 1.415615] device: 'msr0': device_add [ 1.415648] PM: Adding info for No Bus:msr0 [ 1.415804] device: 'msr1': device_add [ 1.415824] PM: Adding info for No Bus:msr1 [ 1.415915] device: 'msr2': device_add [ 1.415933] PM: Adding info for No Bus:msr2 [ 1.416039] device: 'msr3': device_add [ 1.416062] PM: Adding info for No Bus:msr3 [ 1.416151] device class 'cpuid': registering [ 1.416176] device: 'cpu0': device_add [ 1.416199] PM: Adding info for No Bus:cpu0 [ 1.416273] device: 'cpu1': device_add [ 1.416289] PM: Adding info for No Bus:cpu1 [ 1.416353] device: 'cpu2': device_add [ 1.416370] PM: Adding info for No Bus:cpu2 [ 1.416432] device: 'cpu3': device_add [ 1.416464] PM: Adding info for No Bus:cpu3 [ 1.416549] Registering platform device 'efi-framebuffer.0'. Parent at platform [ 1.416552] device: 'efi-framebuffer.0': device_add [ 1.416562] bus: 'platform': add device efi-framebuffer.0 [ 1.416588] PM: Adding info for platform:efi-framebuffer.0 [ 1.416668] bus: 'clocksource': registered [ 1.416673] device: 'clocksource': device_add [ 1.416692] PM: Adding info for No Bus:clocksource [ 1.416698] device: 'clocksource0': device_add [ 1.416708] bus: 'clocksource': add device clocksource0 [ 1.416721] PM: Adding info for clocksource:clocksource0 [ 1.416735] bus: 'platform': add driver alarmtimer [ 1.416767] Registering platform device 'alarmtimer'. Parent at platform [ 1.416770] device: 'alarmtimer': device_add [ 1.416776] bus: 'platform': add device alarmtimer [ 1.416801] PM: Adding info for platform:alarmtimer [ 1.416811] bus: 'platform': driver_probe_device: matched device alarmtimer with driver alarmtimer [ 1.416816] bus: 'platform': really_probe: probing driver alarmtimer with device alarmtimer [ 1.416827] alarmtimer alarmtimer: no default pinctrl state [ 1.416837] devices_kset: Moving alarmtimer to end of list [ 1.416842] driver: 'alarmtimer': driver_bound: bound to device 'alarmtimer' [ 1.416851] bus: 'platform': really_probe: bound device alarmtimer to driver alarmtimer [ 1.416898] bus: 'clockevents': registered [ 1.416903] device: 'clockevents': device_add [ 1.416916] PM: Adding info for No Bus:clockevents [ 1.416922] device: 'clockevent0': device_add [ 1.416928] bus: 'clockevents': add device clockevent0 [ 1.416945] PM: Adding info for clockevents:clockevent0 [ 1.416958] device: 'clockevent1': device_add [ 1.416965] bus: 'clockevents': add device clockevent1 [ 1.416977] PM: Adding info for clockevents:clockevent1 [ 1.416989] device: 'clockevent2': device_add [ 1.416995] bus: 'clockevents': add device clockevent2 [ 1.417023] PM: Adding info for clockevents:clockevent2 [ 1.417037] device: 'clockevent3': device_add [ 1.417043] bus: 'clockevents': add device clockevent3 [ 1.417060] PM: Adding info for clockevents:clockevent3 [ 1.417072] device: 'broadcast': device_add [ 1.417078] bus: 'clockevents': add device broadcast [ 1.417090] PM: Adding info for clockevents:broadcast [ 1.417159] bus: 'event_source': registered [ 1.417163] device: 'msr': device_add [ 1.417182] bus: 'event_source': add device msr [ 1.417196] PM: Adding info for event_source:msr [ 1.417206] device: 'ibs_op': device_add [ 1.417214] bus: 'event_source': add device ibs_op [ 1.417228] PM: Adding info for event_source:ibs_op [ 1.417236] device: 'ibs_fetch': device_add [ 1.417248] bus: 'event_source': add device ibs_fetch [ 1.417262] PM: Adding info for event_source:ibs_fetch [ 1.417271] device: 'amd_l2': device_add [ 1.417280] bus: 'event_source': add device amd_l2 [ 1.417294] PM: Adding info for event_source:amd_l2 [ 1.417301] device: 'amd_nb': device_add [ 1.417316] bus: 'event_source': add device amd_nb [ 1.417329] PM: Adding info for event_source:amd_nb [ 1.417338] device: 'cpu': device_add [ 1.417368] bus: 'event_source': add device cpu [ 1.417381] PM: Adding info for event_source:cpu [ 1.417390] device: 'breakpoint': device_add [ 1.417396] bus: 'event_source': add device breakpoint [ 1.417410] PM: Adding info for event_source:breakpoint [ 1.417418] device: 'software': device_add [ 1.417424] bus: 'event_source': add device software [ 1.417442] PM: Adding info for event_source:software [ 1.417451] Initialise system trusted keyrings [ 1.417595] workingset: timestamp_bits=37 max_order=20 bucket_order=0 [ 1.420587] zbud: loaded [ 1.421502] device: 'autofs': device_add [ 1.421523] PM: Adding info for No Bus:autofs [ 1.421589] pstore: using lzo compression [ 1.421720] SELinux: Registering netfilter hooks [ 1.921853] NET: Registered protocol family 38 [ 1.921863] Key type asymmetric registered [ 1.921866] Asymmetric key parser 'x509' registered [ 1.921975] device class 'bsg': registering [ 1.921991] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.922115] io scheduler noop registered (default) [ 1.922118] io scheduler deadline registered [ 1.922230] io scheduler cfq registered [ 1.922233] io scheduler mq-deadline registered [ 1.922236] io scheduler kyber registered [ 1.922254] io scheduler bfq registered [ 1.922437] device class 'phy': registering [ 1.922529] bus: 'pci': add driver pcieport [ 1.922542] bus: 'pci': driver_probe_device: matched device 0000:00:02.3 with driver pcieport [ 1.922549] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:02.3 [ 1.922561] pcieport 0000:00:02.3: no default pinctrl state [ 1.922575] devices_kset: Moving 0000:00:02.3 to end of list [ 1.922902] device: '0000:00:02.3:pcie001': device_add [ 1.922919] bus: 'pci_express': add device 0000:00:02.3:pcie001 [ 1.922935] PM: Adding info for pci_express:0000:00:02.3:pcie001 [ 1.923001] driver: 'pcieport': driver_bound: bound to device '0000:00:02.3' [ 1.923037] bus: 'pci': really_probe: bound device 0000:00:02.3 to driver pcieport [ 1.923043] bus: 'pci': driver_probe_device: matched device 0000:00:02.4 with driver pcieport [ 1.923047] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:02.4 [ 1.923052] pcieport 0000:00:02.4: no default pinctrl state [ 1.923062] devices_kset: Moving 0000:00:02.4 to end of list [ 1.923280] device: '0000:00:02.4:pcie001': device_add [ 1.923289] bus: 'pci_express': add device 0000:00:02.4:pcie001 [ 1.923306] PM: Adding info for pci_express:0000:00:02.4:pcie001 [ 1.923362] driver: 'pcieport': driver_bound: bound to device '0000:00:02.4' [ 1.923375] bus: 'pci': really_probe: bound device 0000:00:02.4 to driver pcieport [ 1.923406] bus: 'pci_express': add driver aer [ 1.923420] bus: 'pci_express': add driver pcie_pme [ 1.923426] bus: 'pci_express': driver_probe_device: matched device 0000:00:02.3:pcie001 with driver pcie_pme [ 1.923430] bus: 'pci_express': really_probe: probing driver pcie_pme with device 0000:00:02.3:pcie001 [ 1.923435] pcie_pme 0000:00:02.3:pcie001: no default pinctrl state [ 1.923442] devices_kset: Moving 0000:00:02.3:pcie001 to end of list [ 1.923483] pcieport 0000:00:02.3: Signaling PME with IRQ 25 [ 1.923492] driver: 'pcie_pme': driver_bound: bound to device '0000:00:02.3:pcie001' [ 1.923501] bus: 'pci_express': really_probe: bound device 0000:00:02.3:pcie001 to driver pcie_pme [ 1.923506] bus: 'pci_express': driver_probe_device: matched device 0000:00:02.4:pcie001 with driver pcie_pme [ 1.923509] bus: 'pci_express': really_probe: probing driver pcie_pme with device 0000:00:02.4:pcie001 [ 1.923514] pcie_pme 0000:00:02.4:pcie001: no default pinctrl state [ 1.923521] devices_kset: Moving 0000:00:02.4:pcie001 to end of list [ 1.923554] pcieport 0000:00:02.4: Signaling PME with IRQ 27 [ 1.923561] driver: 'pcie_pme': driver_bound: bound to device '0000:00:02.4:pcie001' [ 1.923569] bus: 'pci_express': really_probe: bound device 0000:00:02.4:pcie001 to driver pcie_pme [ 1.923582] bus: 'pci': add driver pci-stub [ 1.923607] bus: 'platform': add driver efi-framebuffer [ 1.923624] bus: 'platform': driver_probe_device: matched device efi-framebuffer.0 with driver efi-framebuffer [ 1.923628] bus: 'platform': really_probe: probing driver efi-framebuffer with device efi-framebuffer.0 [ 1.923633] efi-framebuffer efi-framebuffer.0: no default pinctrl state [ 1.923641] devices_kset: Moving efi-framebuffer.0 to end of list [ 1.923645] efifb: probing for efifb [ 1.923677] efifb: framebuffer at 0xc0000000, using 4224k, total 4224k [ 1.923681] efifb: mode is 1366x768x32, linelength=5632, pages=1 [ 1.923682] efifb: scrolling: redraw [ 1.923686] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.923705] device: 'fb0': device_add [ 1.923730] PM: Adding info for No Bus:fb0 [ 1.923867] device: 'vtcon1': device_add [ 1.923893] PM: Adding info for No Bus:vtcon1 [ 1.932051] Console: switching to colour frame buffer device 170x48 [ 1.939540] fb0: EFI VGA frame buffer device [ 1.939544] driver: 'efi-framebuffer': driver_bound: bound to device 'efi-framebuffer.0' [ 1.939555] bus: 'platform': really_probe: bound device efi-framebuffer.0 to driver efi-framebuffer [ 1.939649] bus: 'acpi': add driver ac [ 1.939680] bus: 'acpi': driver_probe_device: matched device ACPI0003:00 with driver ac [ 1.939684] bus: 'acpi': really_probe: probing driver ac with device ACPI0003:00 [ 1.939690] ac ACPI0003:00: no default pinctrl state [ 1.939698] devices_kset: Moving ACPI0003:00 to end of list [ 1.939764] device: 'ADP1': device_add [ 1.939810] PM: Adding info for No Bus:ADP1 [ 1.939824] device: 'ADP1': dev_uevent: class uevent() returned -11 [ 1.939834] ACPI: AC Adapter [ADP1] (on-line) [ 1.939842] driver: 'ac': driver_bound: bound to device 'ACPI0003:00' [ 1.939853] bus: 'acpi': really_probe: bound device ACPI0003:00 to driver ac [ 1.939870] bus: 'acpi': add driver button [ 1.939909] bus: 'acpi': driver_probe_device: matched device PNP0C0C:00 with driver button [ 1.939913] bus: 'acpi': really_probe: probing driver button with device PNP0C0C:00 [ 1.939918] button PNP0C0C:00: no default pinctrl state [ 1.939926] devices_kset: Moving PNP0C0C:00 to end of list [ 1.939938] device: 'input0': device_add [ 1.939985] PM: Adding info for No Bus:input0 [ 1.940031] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.940054] ACPI: Power Button [PWRB] [ 1.940059] driver: 'button': driver_bound: bound to device 'PNP0C0C:00' [ 1.940069] bus: 'acpi': really_probe: bound device PNP0C0C:00 to driver button [ 1.940078] bus: 'acpi': driver_probe_device: matched device PNP0C0D:00 with driver button [ 1.940081] bus: 'acpi': really_probe: probing driver button with device PNP0C0D:00 [ 1.940086] button PNP0C0D:00: no default pinctrl state [ 1.940094] devices_kset: Moving PNP0C0D:00 to end of list [ 1.940108] device: 'input1': device_add [ 1.940151] PM: Adding info for No Bus:input1 [ 1.940177] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.940198] ACPI: Lid Switch [LID0] [ 1.940203] driver: 'button': driver_bound: bound to device 'PNP0C0D:00' [ 1.940212] bus: 'acpi': really_probe: bound device PNP0C0D:00 to driver button [ 1.940223] bus: 'acpi': driver_probe_device: matched device LNXPWRBN:00 with driver button [ 1.940227] bus: 'acpi': really_probe: probing driver button with device LNXPWRBN:00 [ 1.940232] button LNXPWRBN:00: no default pinctrl state [ 1.940240] devices_kset: Moving LNXPWRBN:00 to end of list [ 1.940247] device: 'input2': device_add [ 1.940290] PM: Adding info for No Bus:input2 [ 1.940316] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.940347] ACPI: Power Button [PWRF] [ 1.940362] driver: 'button': driver_bound: bound to device 'LNXPWRBN:00' [ 1.940371] bus: 'acpi': really_probe: bound device LNXPWRBN:00 to driver button [ 1.940385] bus: 'platform': add driver acpi-fan [ 1.940423] bus: 'acpi': add driver video [ 1.940434] bus: 'acpi': driver_probe_device: matched device LNXVIDEO:00 with driver video [ 1.940438] bus: 'acpi': really_probe: probing driver video with device LNXVIDEO:00 [ 1.940443] video LNXVIDEO:00: no default pinctrl state [ 1.940451] devices_kset: Moving LNXVIDEO:00 to end of list [ 1.940488] video: probe of LNXVIDEO:00 rejects match -19 [ 1.940512] bus: 'acpi': driver_probe_device: matched device LNXVIDEO:01 with driver video [ 1.940516] bus: 'acpi': really_probe: probing driver video with device LNXVIDEO:01 [ 1.940521] video LNXVIDEO:01: no default pinctrl state [ 1.940530] devices_kset: Moving LNXVIDEO:01 to end of list [ 1.940631] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no) [ 1.941171] device: 'acpi_video0': device_add [ 1.941204] PM: Adding info for No Bus:acpi_video0 [ 1.941230] device: 'cooling_device0': device_add [ 1.941259] PM: Adding info for No Bus:cooling_device0 [ 1.941270] acpi device:3f: registered as cooling_device0 [ 1.941315] device: 'input3': device_add [ 1.941361] PM: Adding info for No Bus:input3 [ 1.941392] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input3 [ 1.941400] driver: 'video': driver_bound: bound to device 'LNXVIDEO:01' [ 1.941409] bus: 'acpi': really_probe: bound device LNXVIDEO:01 to driver video [ 1.941432] bus: 'cpu': add driver processor [ 1.941441] bus: 'cpu': driver_probe_device: matched device cpu0 with driver processor [ 1.941444] bus: 'cpu': really_probe: probing driver processor with device cpu0 [ 1.941450] processor cpu0: no default pinctrl state [ 1.941458] devices_kset: Moving cpu0 to end of list [ 1.941619] device: 'cooling_device1': device_add [ 1.941645] PM: Adding info for No Bus:cooling_device1 [ 1.941664] driver: 'processor': driver_bound: bound to device 'cpu0' [ 1.941723] bus: 'cpu': really_probe: bound device cpu0 to driver processor [ 1.941728] bus: 'cpu': driver_probe_device: matched device cpu1 with driver processor [ 1.941731] bus: 'cpu': really_probe: probing driver processor with device cpu1 [ 1.941736] processor cpu1: no default pinctrl state [ 1.941744] devices_kset: Moving cpu1 to end of list [ 1.941890] device: 'cooling_device2': device_add [ 1.941915] PM: Adding info for No Bus:cooling_device2 [ 1.941930] driver: 'processor': driver_bound: bound to device 'cpu1' [ 1.941985] bus: 'cpu': really_probe: bound device cpu1 to driver processor [ 1.941991] bus: 'cpu': driver_probe_device: matched device cpu2 with driver processor [ 1.941994] bus: 'cpu': really_probe: probing driver processor with device cpu2 [ 1.941999] processor cpu2: no default pinctrl state [ 1.942021] devices_kset: Moving cpu2 to end of list [ 1.942161] device: 'cooling_device3': device_add [ 1.942192] PM: Adding info for No Bus:cooling_device3 [ 1.942207] driver: 'processor': driver_bound: bound to device 'cpu2' [ 1.942262] bus: 'cpu': really_probe: bound device cpu2 to driver processor [ 1.942267] bus: 'cpu': driver_probe_device: matched device cpu3 with driver processor [ 1.942271] bus: 'cpu': really_probe: probing driver processor with device cpu3 [ 1.942276] processor cpu3: no default pinctrl state [ 1.942284] devices_kset: Moving cpu3 to end of list [ 1.942374] device: 'cooling_device4': device_add [ 1.942405] PM: Adding info for No Bus:cooling_device4 [ 1.942419] driver: 'processor': driver_bound: bound to device 'cpu3' [ 1.942473] bus: 'cpu': really_probe: bound device cpu3 to driver processor [ 1.942611] bus: 'acpi': add driver thermal [ 1.942652] bus: 'acpi': driver_probe_device: matched device LNXTHERM:00 with driver thermal [ 1.942656] bus: 'acpi': really_probe: probing driver thermal with device LNXTHERM:00 [ 1.942661] thermal LNXTHERM:00: no default pinctrl state [ 1.942669] devices_kset: Moving LNXTHERM:00 to end of list [ 1.943766] device: 'thermal_zone0': device_add [ 1.943814] PM: Adding info for No Bus:thermal_zone0 [ 1.943833] device: 'hwmon0': device_add [ 1.943853] PM: Adding info for No Bus:hwmon0 [ 1.944346] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.944350] ACPI: Thermal Zone [TZ00] (43 C) [ 1.944355] driver: 'thermal': driver_bound: bound to device 'LNXTHERM:00' [ 1.944365] bus: 'acpi': really_probe: bound device LNXTHERM:00 to driver thermal [ 1.944370] bus: 'acpi': driver_probe_device: matched device LNXTHERM:01 with driver thermal [ 1.944374] bus: 'acpi': really_probe: probing driver thermal with device LNXTHERM:01 [ 1.944379] thermal LNXTHERM:01: no default pinctrl state [ 1.944387] devices_kset: Moving LNXTHERM:01 to end of list [ 1.964371] device: 'thermal_zone1': device_add [ 1.964443] PM: Adding info for No Bus:thermal_zone1 [ 1.974312] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.974318] ACPI: Thermal Zone [TZ01] (43 C) [ 1.974326] driver: 'thermal': driver_bound: bound to device 'LNXTHERM:01' [ 1.974346] bus: 'acpi': really_probe: bound device LNXTHERM:01 to driver thermal [ 1.974392] bus: 'acpi': add driver hardware_error_device [ 1.974463] bus: 'acpi': add driver battery [ 1.974480] bus: 'acpi': add driver processor_aggregator [ 1.974497] bus: 'acpi': driver_probe_device: matched device PNP0C0A:00 with driver battery [ 1.974503] bus: 'acpi': really_probe: probing driver battery with device PNP0C0A:00 [ 1.974512] battery PNP0C0A:00: no default pinctrl state [ 1.974522] bus: 'platform': add driver gpio-clk [ 1.974525] devices_kset: Moving PNP0C0A:00 to end of list [ 1.974544] bus: 'platform': add driver clk-pmc-atom [ 1.974583] device: 'ptmx': device_add [ 1.974609] PM: Adding info for No Bus:ptmx [ 1.974780] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.974805] bus: 'pnp': add driver serial [ 1.974877] Registering platform device 'serial8250'. Parent at platform [ 1.974880] device: 'serial8250': device_add [ 1.974888] bus: 'platform': add device serial8250 [ 1.974907] PM: Adding info for platform:serial8250 [ 1.974939] device: 'ttyS0': device_add [ 1.974971] PM: Adding info for No Bus:ttyS0 [ 1.975085] device: 'ttyS1': device_add [ 1.975118] PM: Adding info for No Bus:ttyS1 [ 1.975193] device: 'ttyS2': device_add [ 1.975223] PM: Adding info for No Bus:ttyS2 [ 1.975295] device: 'ttyS3': device_add [ 1.975325] PM: Adding info for No Bus:ttyS3 [ 1.975386] device: 'ttyS4': device_add [ 1.975416] PM: Adding info for No Bus:ttyS4 [ 1.975488] device: 'ttyS5': device_add [ 1.975514] PM: Adding info for No Bus:ttyS5 [ 1.975574] device: 'ttyS6': device_add [ 1.975603] PM: Adding info for No Bus:ttyS6 [ 1.975659] device: 'ttyS7': device_add [ 1.975689] PM: Adding info for No Bus:ttyS7 [ 1.975748] device: 'ttyS8': device_add [ 1.975778] PM: Adding info for No Bus:ttyS8 [ 1.975837] device: 'ttyS9': device_add [ 1.975866] PM: Adding info for No Bus:ttyS9 [ 1.975925] device: 'ttyS10': device_add [ 1.975951] PM: Adding info for No Bus:ttyS10 [ 1.976025] device: 'ttyS11': device_add [ 1.976054] PM: Adding info for No Bus:ttyS11 [ 1.976113] device: 'ttyS12': device_add [ 1.976142] PM: Adding info for No Bus:ttyS12 [ 1.976198] device: 'ttyS13': device_add [ 1.976228] PM: Adding info for No Bus:ttyS13 [ 1.976284] device: 'ttyS14': device_add [ 1.976313] PM: Adding info for No Bus:ttyS14 [ 1.976372] device: 'ttyS15': device_add [ 1.976397] PM: Adding info for No Bus:ttyS15 [ 1.976457] device: 'ttyS16': device_add [ 1.976486] PM: Adding info for No Bus:ttyS16 [ 1.976552] device: 'ttyS17': device_add [ 1.976582] PM: Adding info for No Bus:ttyS17 [ 1.976638] device: 'ttyS18': device_add [ 1.976667] PM: Adding info for No Bus:ttyS18 [ 1.976723] device: 'ttyS19': device_add [ 1.976754] PM: Adding info for No Bus:ttyS19 [ 1.976814] device: 'ttyS20': device_add [ 1.976840] PM: Adding info for No Bus:ttyS20 [ 1.976899] device: 'ttyS21': device_add [ 1.976928] PM: Adding info for No Bus:ttyS21 [ 1.976984] device: 'ttyS22': device_add [ 1.977025] PM: Adding info for No Bus:ttyS22 [ 1.977083] device: 'ttyS23': device_add [ 1.977112] PM: Adding info for No Bus:ttyS23 [ 1.977170] device: 'ttyS24': device_add [ 1.977199] PM: Adding info for No Bus:ttyS24 [ 1.977261] device: 'ttyS25': device_add [ 1.977286] PM: Adding info for No Bus:ttyS25 [ 1.977348] device: 'ttyS26': device_add [ 1.977376] PM: Adding info for No Bus:ttyS26 [ 1.977431] device: 'ttyS27': device_add [ 1.977460] PM: Adding info for No Bus:ttyS27 [ 1.977519] device: 'ttyS28': device_add [ 1.977548] PM: Adding info for No Bus:ttyS28 [ 1.977603] device: 'ttyS29': device_add [ 1.977632] PM: Adding info for No Bus:ttyS29 [ 1.977692] device: 'ttyS30': device_add [ 1.977718] PM: Adding info for No Bus:ttyS30 [ 1.977777] device: 'ttyS31': device_add [ 1.977805] PM: Adding info for No Bus:ttyS31 [ 1.977857] bus: 'platform': add driver serial8250 [ 1.977867] bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250 [ 1.977870] bus: 'platform': really_probe: probing driver serial8250 with device serial8250 [ 1.977875] serial8250 serial8250: no default pinctrl state [ 1.977881] devices_kset: Moving serial8250 to end of list [ 1.977885] driver: 'serial8250': driver_bound: bound to device 'serial8250' [ 1.977893] bus: 'platform': really_probe: bound device serial8250 to driver serial8250 [ 1.977905] bus: 'pci': add driver serial [ 1.977998] bus: 'pci': add driver exar_serial [ 1.978039] bus: 'platform': add driver dw-apb-uart [ 1.978058] bus: 'pci': add driver 8250_lpss [ 1.978145] device class 'raw': registering [ 1.978156] device: 'rawctl': device_add [ 1.978172] PM: Adding info for No Bus:rawctl [ 1.978238] device: 'hpet': device_add [ 1.978257] PM: Adding info for No Bus:hpet [ 1.978309] bus: 'acpi': add driver hpet [ 1.978342] bus: 'acpi': driver_probe_device: matched device PNP0103:00 with driver hpet [ 1.978346] bus: 'acpi': really_probe: probing driver hpet with device PNP0103:00 [ 1.978350] hpet PNP0103:00: no default pinctrl state [ 1.978357] devices_kset: Moving PNP0103:00 to end of list [ 1.978446] hpet: probe of PNP0103:00 rejects match -19 [ 1.978460] device: 'nvram': device_add [ 1.978474] PM: Adding info for No Bus:nvram [ 1.978519] Non-volatile memory driver v1.3 [ 1.978523] device: 'hw_random': device_add [ 1.978544] PM: Adding info for No Bus:hw_random [ 1.978650] device: 'cache': device_add [ 1.978666] PM: Adding info for No Bus:cache [ 1.978674] device: 'index0': device_add [ 1.978700] PM: Adding info for No Bus:index0 [ 1.978705] device: 'index1': device_add [ 1.978725] PM: Adding info for No Bus:index1 [ 1.978733] device: 'index2': device_add [ 1.978758] PM: Adding info for No Bus:index2 [ 1.978817] device: 'cache': device_add [ 1.978837] PM: Adding info for No Bus:cache [ 1.978845] device: 'index0': device_add [ 1.978867] PM: Adding info for No Bus:index0 [ 1.978871] device: 'index1': device_add [ 1.978895] PM: Adding info for No Bus:index1 [ 1.978900] device: 'index2': device_add [ 1.978921] PM: Adding info for No Bus:index2 [ 1.978983] device: 'cache': device_add [ 1.979000] PM: Adding info for No Bus:cache [ 1.979022] device: 'index0': device_add [ 1.979045] PM: Adding info for No Bus:index0 [ 1.979050] device: 'index1': device_add [ 1.979089] PM: Adding info for No Bus:index1 [ 1.979095] device: 'index2': device_add [ 1.979123] PM: Adding info for No Bus:index2 [ 1.979158] device: 'cache': device_add [ 1.979174] PM: Adding info for No Bus:cache [ 1.979181] device: 'index0': device_add [ 1.979209] PM: Adding info for No Bus:index0 [ 1.979214] device: 'index1': device_add [ 1.979237] PM: Adding info for No Bus:index1 [ 1.979242] device: 'index2': device_add [ 1.979269] PM: Adding info for No Bus:index2 [ 1.979281] bus: 'platform': add driver e820_pmem [ 1.979300] device class 'scsi_generic': registering [ 1.979329] bus: 'pci': add driver ahci [ 1.979359] bus: 'pci': driver_probe_device: matched device 0000:00:11.0 with driver ahci [ 1.979363] bus: 'pci': really_probe: probing driver ahci with device 0000:00:11.0 [ 1.979368] ahci 0000:00:11.0: no default pinctrl state [ 1.979378] devices_kset: Moving 0000:00:11.0 to end of list [ 1.979389] ahci 0000:00:11.0: version 3.0 [ 1.979761] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.979770] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.979919] device: 'ata1': device_add [ 1.979934] PM: Adding info for No Bus:ata1 [ 1.979941] device: 'ata1': device_add [ 1.979960] PM: Adding info for No Bus:ata1 [ 1.979982] device: 'link1': device_add [ 1.979998] PM: Adding info for No Bus:link1 [ 1.980021] device: 'link1': device_add [ 1.980041] PM: Adding info for No Bus:link1 [ 1.980078] device: 'dev1.0': device_add [ 1.980091] PM: Adding info for No Bus:dev1.0 [ 1.980095] device: 'dev1.0': device_add [ 1.980117] PM: Adding info for No Bus:dev1.0 [ 1.980142] device: 'ata2': device_add [ 1.980154] PM: Adding info for No Bus:ata2 [ 1.980159] device: 'ata2': device_add [ 1.980183] PM: Adding info for No Bus:ata2 [ 1.980200] device: 'link2': device_add [ 1.980223] PM: Adding info for No Bus:link2 [ 1.980227] device: 'link2': device_add [ 1.980248] PM: Adding info for No Bus:link2 [ 1.980280] device: 'dev2.0': device_add [ 1.980293] PM: Adding info for No Bus:dev2.0 [ 1.980297] device: 'dev2.0': device_add [ 1.980314] PM: Adding info for No Bus:dev2.0 [ 1.980596] scsi host0: ahci [ 1.980661] device: 'host0': device_add [ 1.980669] bus: 'scsi': add device host0 [ 1.980682] PM: Adding info for scsi:host0 [ 1.980693] device: 'host0': device_add [ 1.980734] PM: Adding info for No Bus:host0 [ 1.980948] scsi host1: ahci [ 1.980952] device: 'host1': device_add [ 1.980960] bus: 'scsi': add device host1 [ 1.980973] PM: Adding info for scsi:host1 [ 1.980983] device: 'host1': device_add [ 1.981041] PM: Adding info for No Bus:host1 [ 1.981073] ata1: SATA max UDMA/133 abar m1024@0xfeb6e000 port 0xfeb6e100 irq 28 [ 1.981078] ata2: SATA max UDMA/133 abar m1024@0xfeb6e000 port 0xfeb6e180 irq 28 [ 1.981090] driver: 'ahci': driver_bound: bound to device '0000:00:11.0' [ 1.981106] bus: 'pci': really_probe: bound device 0000:00:11.0 to driver ahci [ 1.981179] bus: 'pci': add driver ata_piix [ 1.981245] Registering platform device 'Fixed MDIO bus.0'. Parent at platform [ 1.981248] device: 'Fixed MDIO bus.0': device_add [ 1.981255] bus: 'platform': add device Fixed MDIO bus.0 [ 1.981276] PM: Adding info for platform:Fixed MDIO bus.0 [ 1.981296] device: 'fixed-0': device_add [ 1.981315] PM: Adding info for No Bus:fixed-0 [ 1.981330] libphy: Fixed MDIO Bus: probed [ 1.981334] device class 'usbmon': registering [ 1.981352] device: 'usbmon0': device_add [ 1.981370] PM: Adding info for No Bus:usbmon0 [ 1.981463] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.981465] ehci-pci: EHCI PCI platform driver [ 1.981469] bus: 'pci': add driver ehci-pci [ 1.981481] bus: 'pci': driver_probe_device: matched device 0000:00:12.2 with driver ehci-pci [ 1.981486] bus: 'pci': really_probe: probing driver ehci-pci with device 0000:00:12.2 [ 1.981494] ehci-pci 0000:00:12.2: no default pinctrl state [ 1.981504] devices_kset: Moving 0000:00:12.2 to end of list [ 1.981742] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.981759] device: 'usbmon1': device_add [ 1.981779] PM: Adding info for No Bus:usbmon1 [ 1.981834] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.981844] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.981858] ehci-pci 0000:00:12.2: debug port 1 [ 1.981931] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6c000 [ 1.988024] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.988141] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17 [ 1.988146] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.988150] usb usb1: Product: EHCI Host Controller [ 1.988154] usb usb1: Manufacturer: Linux 4.17.1-025.dbg.x86_64+ ehci_hcd [ 1.988158] usb usb1: SerialNumber: 0000:00:12.2 [ 1.988167] device: 'usb1': device_add [ 1.988237] bus: 'usb': add device usb1 [ 1.988262] PM: Adding info for usb:usb1 [ 1.988406] bus: 'usb': driver_probe_device: matched device usb1 with driver usb [ 1.988410] bus: 'usb': really_probe: probing driver usb with device usb1 [ 1.988417] devices_kset: Moving usb1 to end of list [ 1.988447] device: '1-0:1.0': device_add [ 1.988473] bus: 'usb': add device 1-0:1.0 [ 1.988480] PM: Adding info for usb:1-0:1.0 [ 1.988500] bus: 'usb': driver_probe_device: matched device 1-0:1.0 with driver hub [ 1.988503] bus: 'usb': really_probe: probing driver hub with device 1-0:1.0 [ 1.988508] hub 1-0:1.0: no default pinctrl state [ 1.988516] devices_kset: Moving 1-0:1.0 to end of list [ 1.988524] hub 1-0:1.0: USB hub found [ 1.988545] hub 1-0:1.0: 4 ports detected [ 1.988574] device: 'usb1-port1': device_add [ 1.988601] PM: Adding info for No Bus:usb1-port1 [ 1.988612] device: 'usb1-port2': device_add [ 1.988638] PM: Adding info for No Bus:usb1-port2 [ 1.988647] device: 'usb1-port3': device_add [ 1.988669] PM: Adding info for No Bus:usb1-port3 [ 1.988677] device: 'usb1-port4': device_add [ 1.988703] PM: Adding info for No Bus:usb1-port4 [ 1.988801] driver: 'hub': driver_bound: bound to device '1-0:1.0' [ 1.988818] bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub [ 1.988826] device: 'ep_81': device_add [ 1.988851] PM: Adding info for No Bus:ep_81 [ 1.988855] driver: 'usb': driver_bound: bound to device 'usb1' [ 1.988870] bus: 'usb': really_probe: bound device usb1 to driver usb [ 1.988876] device: 'ep_00': device_add [ 1.988902] PM: Adding info for No Bus:ep_00 [ 1.988927] driver: 'ehci-pci': driver_bound: bound to device '0000:00:12.2' [ 1.988940] bus: 'pci': really_probe: bound device 0000:00:12.2 to driver ehci-pci [ 1.988945] bus: 'pci': driver_probe_device: matched device 0000:00:13.2 with driver ehci-pci [ 1.988949] bus: 'pci': really_probe: probing driver ehci-pci with device 0000:00:13.2 [ 1.988954] ehci-pci 0000:00:13.2: no default pinctrl state [ 1.988963] devices_kset: Moving 0000:00:13.2 to end of list [ 1.989161] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.989174] device: 'usbmon2': device_add [ 1.989191] PM: Adding info for No Bus:usbmon2 [ 1.989281] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.989293] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.989305] ehci-pci 0000:00:13.2: debug port 1 [ 1.989338] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6a000 [ 1.996053] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.996136] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17 [ 1.996140] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.996144] usb usb2: Product: EHCI Host Controller [ 1.996147] usb usb2: Manufacturer: Linux 4.17.1-025.dbg.x86_64+ ehci_hcd [ 1.996150] usb usb2: SerialNumber: 0000:00:13.2 [ 1.996156] device: 'usb2': device_add [ 1.996210] bus: 'usb': add device usb2 [ 1.996236] PM: Adding info for usb:usb2 [ 1.996322] bus: 'usb': driver_probe_device: matched device usb2 with driver usb [ 1.996325] bus: 'usb': really_probe: probing driver usb with device usb2 [ 1.996331] devices_kset: Moving usb2 to end of list [ 1.996351] device: '2-0:1.0': device_add [ 1.996370] bus: 'usb': add device 2-0:1.0 [ 1.996376] PM: Adding info for usb:2-0:1.0 [ 1.996391] bus: 'usb': driver_probe_device: matched device 2-0:1.0 with driver hub [ 1.996394] bus: 'usb': really_probe: probing driver hub with device 2-0:1.0 [ 1.996399] hub 2-0:1.0: no default pinctrl state [ 1.996405] devices_kset: Moving 2-0:1.0 to end of list [ 1.996410] hub 2-0:1.0: USB hub found [ 1.996426] hub 2-0:1.0: 4 ports detected [ 1.996449] device: 'usb2-port1': device_add [ 1.996472] PM: Adding info for No Bus:usb2-port1 [ 1.996479] device: 'usb2-port2': device_add [ 1.996503] PM: Adding info for No Bus:usb2-port2 [ 1.996513] device: 'usb2-port3': device_add [ 1.996557] PM: Adding info for No Bus:usb2-port3 [ 1.996570] device: 'usb2-port4': device_add [ 1.996594] PM: Adding info for No Bus:usb2-port4 [ 1.996669] driver: 'hub': driver_bound: bound to device '2-0:1.0' [ 1.996684] bus: 'usb': really_probe: bound device 2-0:1.0 to driver hub [ 1.996691] device: 'ep_81': device_add [ 1.996711] PM: Adding info for No Bus:ep_81 [ 1.996714] driver: 'usb': driver_bound: bound to device 'usb2' [ 1.996726] bus: 'usb': really_probe: bound device usb2 to driver usb [ 1.996732] device: 'ep_00': device_add [ 1.996755] PM: Adding info for No Bus:ep_00 [ 1.996774] driver: 'ehci-pci': driver_bound: bound to device '0000:00:13.2' [ 1.996786] bus: 'pci': really_probe: bound device 0000:00:13.2 to driver ehci-pci [ 1.996805] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.996807] ohci-pci: OHCI PCI platform driver [ 1.996810] bus: 'pci': add driver ohci-pci [ 1.996819] bus: 'pci': driver_probe_device: matched device 0000:00:12.0 with driver ohci-pci [ 1.996821] bus: 'pci': really_probe: probing driver ohci-pci with device 0000:00:12.0 [ 1.996826] ohci-pci 0000:00:12.0: no default pinctrl state [ 1.996833] devices_kset: Moving 0000:00:12.0 to end of list [ 1.996998] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.997020] device: 'usbmon3': device_add [ 1.997042] PM: Adding info for No Bus:usbmon3 [ 1.997094] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.997130] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb6d000 [ 2.053349] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.17 [ 2.053356] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.053360] usb usb3: Product: OHCI PCI host controller [ 2.053363] usb usb3: Manufacturer: Linux 4.17.1-025.dbg.x86_64+ ohci_hcd [ 2.053366] usb usb3: SerialNumber: 0000:00:12.0 [ 2.053377] device: 'usb3': device_add [ 2.053475] bus: 'usb': add device usb3 [ 2.053501] PM: Adding info for usb:usb3 [ 2.053682] bus: 'usb': driver_probe_device: matched device usb3 with driver usb [ 2.053687] bus: 'usb': really_probe: probing driver usb with device usb3 [ 2.053695] devices_kset: Moving usb3 to end of list [ 2.053722] device: '3-0:1.0': device_add [ 2.053739] bus: 'usb': add device 3-0:1.0 [ 2.053745] PM: Adding info for usb:3-0:1.0 [ 2.053762] bus: 'usb': driver_probe_device: matched device 3-0:1.0 with driver hub [ 2.053765] bus: 'usb': really_probe: probing driver hub with device 3-0:1.0 [ 2.053772] hub 3-0:1.0: no default pinctrl state [ 2.053780] devices_kset: Moving 3-0:1.0 to end of list [ 2.053787] hub 3-0:1.0: USB hub found [ 2.053806] hub 3-0:1.0: 4 ports detected [ 2.053835] device: 'usb3-port1': device_add [ 2.053861] PM: Adding info for No Bus:usb3-port1 [ 2.053871] device: 'usb3-port2': device_add [ 2.053891] PM: Adding info for No Bus:usb3-port2 [ 2.053898] device: 'usb3-port3': device_add [ 2.053917] PM: Adding info for No Bus:usb3-port3 [ 2.053923] device: 'usb3-port4': device_add [ 2.053945] PM: Adding info for No Bus:usb3-port4 [ 2.054040] driver: 'hub': driver_bound: bound to device '3-0:1.0' [ 2.054055] bus: 'usb': really_probe: bound device 3-0:1.0 to driver hub [ 2.054063] device: 'ep_81': device_add [ 2.054083] PM: Adding info for No Bus:ep_81 [ 2.054088] driver: 'usb': driver_bound: bound to device 'usb3' [ 2.054099] bus: 'usb': really_probe: bound device usb3 to driver usb [ 2.054106] device: 'ep_00': device_add [ 2.054128] PM: Adding info for No Bus:ep_00 [ 2.054169] driver: 'ohci-pci': driver_bound: bound to device '0000:00:12.0' [ 2.054182] bus: 'pci': really_probe: bound device 0000:00:12.0 to driver ohci-pci [ 2.054189] bus: 'pci': driver_probe_device: matched device 0000:00:13.0 with driver ohci-pci [ 2.054192] bus: 'pci': really_probe: probing driver ohci-pci with device 0000:00:13.0 [ 2.054196] ohci-pci 0000:00:13.0: no default pinctrl state [ 2.054205] devices_kset: Moving 0000:00:13.0 to end of list [ 2.054421] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.054437] device: 'usbmon4': device_add [ 2.054456] PM: Adding info for No Bus:usbmon4 [ 2.054516] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4 [ 2.054547] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6b000 [ 2.109270] device: 'BAT1': device_add [ 2.109346] PM: Adding info for No Bus:BAT1 [ 2.109380] device: 'BAT1': dev_uevent: class uevent() returned -11 [ 2.109399] ACPI: Battery Slot [BAT1] (battery present) [ 2.109427] driver: 'battery': driver_bound: bound to device 'PNP0C0A:00' [ 2.109443] bus: 'acpi': really_probe: bound device PNP0C0A:00 to driver battery [ 2.110188] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.17 [ 2.110194] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.110198] usb usb4: Product: OHCI PCI host controller [ 2.110202] usb usb4: Manufacturer: Linux 4.17.1-025.dbg.x86_64+ ohci_hcd [ 2.110206] usb usb4: SerialNumber: 0000:00:13.0 [ 2.110215] device: 'usb4': device_add [ 2.110289] bus: 'usb': add device usb4 [ 2.110316] PM: Adding info for usb:usb4 [ 2.110478] bus: 'usb': driver_probe_device: matched device usb4 with driver usb [ 2.110483] bus: 'usb': really_probe: probing driver usb with device usb4 [ 2.110498] devices_kset: Moving usb4 to end of list [ 2.110526] device: '4-0:1.0': device_add [ 2.110547] bus: 'usb': add device 4-0:1.0 [ 2.110553] PM: Adding info for usb:4-0:1.0 [ 2.110573] bus: 'usb': driver_probe_device: matched device 4-0:1.0 with driver hub [ 2.110577] bus: 'usb': really_probe: probing driver hub with device 4-0:1.0 [ 2.110586] hub 4-0:1.0: no default pinctrl state [ 2.110596] devices_kset: Moving 4-0:1.0 to end of list [ 2.110604] hub 4-0:1.0: USB hub found [ 2.110625] hub 4-0:1.0: 4 ports detected [ 2.110661] device: 'usb4-port1': device_add [ 2.110688] PM: Adding info for No Bus:usb4-port1 [ 2.110699] device: 'usb4-port2': device_add [ 2.110725] PM: Adding info for No Bus:usb4-port2 [ 2.110733] device: 'usb4-port3': device_add [ 2.110755] PM: Adding info for No Bus:usb4-port3 [ 2.110762] device: 'usb4-port4': device_add [ 2.110788] PM: Adding info for No Bus:usb4-port4 [ 2.110871] driver: 'hub': driver_bound: bound to device '4-0:1.0' [ 2.110888] bus: 'usb': really_probe: bound device 4-0:1.0 to driver hub [ 2.110897] device: 'ep_81': device_add [ 2.110920] PM: Adding info for No Bus:ep_81 [ 2.110925] driver: 'usb': driver_bound: bound to device 'usb4' [ 2.110939] bus: 'usb': really_probe: bound device usb4 to driver usb [ 2.110947] device: 'ep_00': device_add [ 2.110972] PM: Adding info for No Bus:ep_00 [ 2.111029] driver: 'ohci-pci': driver_bound: bound to device '0000:00:13.0' [ 2.111045] bus: 'pci': really_probe: bound device 0000:00:13.0 to driver ohci-pci [ 2.111075] uhci_hcd: USB Universal Host Controller Interface driver [ 2.111095] bus: 'pci': add driver uhci_hcd [ 2.111132] bus: 'pci': add driver xhci_hcd [ 2.111142] bus: 'pci': driver_probe_device: matched device 0000:00:10.0 with driver xhci_hcd [ 2.111145] bus: 'pci': really_probe: probing driver xhci_hcd with device 0000:00:10.0 [ 2.111150] xhci_hcd 0000:00:10.0: no default pinctrl state [ 2.111159] devices_kset: Moving 0000:00:10.0 to end of list [ 2.111388] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.111406] device: 'usbmon5': device_add [ 2.111432] PM: Adding info for No Bus:usbmon5 [ 2.111493] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5 [ 2.111685] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410 [ 2.112074] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17 [ 2.112079] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.112083] usb usb5: Product: xHCI Host Controller [ 2.112087] usb usb5: Manufacturer: Linux 4.17.1-025.dbg.x86_64+ xhci-hcd [ 2.112091] usb usb5: SerialNumber: 0000:00:10.0 [ 2.112098] device: 'usb5': device_add [ 2.112161] bus: 'usb': add device usb5 [ 2.112185] PM: Adding info for usb:usb5 [ 2.112287] bus: 'usb': driver_probe_device: matched device usb5 with driver usb [ 2.112291] bus: 'usb': really_probe: probing driver usb with device usb5 [ 2.112297] devices_kset: Moving usb5 to end of list [ 2.112322] device: '5-0:1.0': device_add [ 2.112345] bus: 'usb': add device 5-0:1.0 [ 2.112352] PM: Adding info for usb:5-0:1.0 [ 2.112368] bus: 'usb': driver_probe_device: matched device 5-0:1.0 with driver hub [ 2.112372] bus: 'usb': really_probe: probing driver hub with device 5-0:1.0 [ 2.112377] hub 5-0:1.0: no default pinctrl state [ 2.112384] devices_kset: Moving 5-0:1.0 to end of list [ 2.112390] hub 5-0:1.0: USB hub found [ 2.112412] hub 5-0:1.0: 2 ports detected [ 2.112439] device: 'usb5-port1': device_add [ 2.112473] PM: Adding info for No Bus:usb5-port1 [ 2.112481] device: 'usb5-port2': device_add [ 2.112514] PM: Adding info for No Bus:usb5-port2 [ 2.112573] driver: 'hub': driver_bound: bound to device '5-0:1.0' [ 2.112589] bus: 'usb': really_probe: bound device 5-0:1.0 to driver hub [ 2.112597] device: 'ep_81': device_add [ 2.112619] PM: Adding info for No Bus:ep_81 [ 2.112623] driver: 'usb': driver_bound: bound to device 'usb5' [ 2.112637] bus: 'usb': really_probe: bound device usb5 to driver usb [ 2.112644] device: 'ep_00': device_add [ 2.112669] PM: Adding info for No Bus:ep_00 [ 2.112709] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.112722] device: 'usbmon6': device_add [ 2.112740] PM: Adding info for No Bus:usbmon6 [ 2.112797] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6 [ 2.112806] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed [ 2.115096] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.115168] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17 [ 2.115172] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.115176] usb usb6: Product: xHCI Host Controller [ 2.115180] usb usb6: Manufacturer: Linux 4.17.1-025.dbg.x86_64+ xhci-hcd [ 2.115184] usb usb6: SerialNumber: 0000:00:10.0 [ 2.115190] device: 'usb6': device_add [ 2.115246] bus: 'usb': add device usb6 [ 2.115273] PM: Adding info for usb:usb6 [ 2.115395] bus: 'usb': driver_probe_device: matched device usb6 with driver usb [ 2.115398] bus: 'usb': really_probe: probing driver usb with device usb6 [ 2.115404] devices_kset: Moving usb6 to end of list [ 2.115435] device: '6-0:1.0': device_add [ 2.115458] bus: 'usb': add device 6-0:1.0 [ 2.115465] PM: Adding info for usb:6-0:1.0 [ 2.115482] bus: 'usb': driver_probe_device: matched device 6-0:1.0 with driver hub [ 2.115486] bus: 'usb': really_probe: probing driver hub with device 6-0:1.0 [ 2.115491] hub 6-0:1.0: no default pinctrl state [ 2.115498] devices_kset: Moving 6-0:1.0 to end of list [ 2.115503] hub 6-0:1.0: USB hub found [ 2.115524] hub 6-0:1.0: 2 ports detected [ 2.115554] device: 'usb6-port1': device_add [ 2.115581] PM: Adding info for No Bus:usb6-port1 [ 2.115606] device: 'usb6-port2': device_add [ 2.115636] PM: Adding info for No Bus:usb6-port2 [ 2.115693] driver: 'hub': driver_bound: bound to device '6-0:1.0' [ 2.115709] bus: 'usb': really_probe: bound device 6-0:1.0 to driver hub [ 2.115716] device: 'ep_81': device_add [ 2.115739] PM: Adding info for No Bus:ep_81 [ 2.115743] driver: 'usb': driver_bound: bound to device 'usb6' [ 2.115756] bus: 'usb': really_probe: bound device usb6 to driver usb [ 2.115763] device: 'ep_00': device_add [ 2.115788] PM: Adding info for No Bus:ep_00 [ 2.115796] driver: 'xhci_hcd': driver_bound: bound to device '0000:00:10.0' [ 2.115809] bus: 'pci': really_probe: bound device 0000:00:10.0 to driver xhci_hcd [ 2.115855] bus: 'usb-serial': registered [ 2.115866] bus: 'usb': add driver usbserial_generic [ 2.115886] usbcore: registered new interface driver usbserial_generic [ 2.115889] bus: 'usb-serial': add driver generic [ 2.115906] usbserial: USB Serial support registered for generic [ 2.115919] bus: 'pnp': add driver i8042 kbd [ 2.115934] bus: 'pnp': driver_probe_device: matched device 00:05 with driver i8042 kbd [ 2.115938] bus: 'pnp': really_probe: probing driver i8042 kbd with device 00:05 [ 2.115943] i8042 kbd 00:05: no default pinctrl state [ 2.115951] devices_kset: Moving 00:05 to end of list [ 2.115958] driver: 'i8042 kbd': driver_bound: bound to device '00:05' [ 2.115966] bus: 'pnp': really_probe: bound device 00:05 to driver i8042 kbd [ 2.115980] bus: 'pnp': add driver i8042 aux [ 2.115992] bus: 'pnp': driver_probe_device: matched device 00:06 with driver i8042 aux [ 2.115996] bus: 'pnp': really_probe: probing driver i8042 aux with device 00:06 [ 2.116000] i8042 aux 00:06: no default pinctrl state [ 2.116023] devices_kset: Moving 00:06 to end of list [ 2.116029] driver: 'i8042 aux': driver_bound: bound to device '00:06' [ 2.116037] bus: 'pnp': really_probe: bound device 00:06 to driver i8042 aux [ 2.116051] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 2.116369] Registering platform device 'i8042'. Parent at platform [ 2.116375] device: 'i8042': device_add [ 2.116383] bus: 'platform': add device i8042 [ 2.116399] PM: Adding info for platform:i8042 [ 2.116419] bus: 'platform': add driver i8042 [ 2.116437] bus: 'platform': driver_probe_device: matched device i8042 with driver i8042 [ 2.116440] bus: 'platform': really_probe: probing driver i8042 with device i8042 [ 2.116445] i8042 i8042: no default pinctrl state [ 2.116452] devices_kset: Moving i8042 to end of list [ 2.119763] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.119777] device: 'serio0': device_add [ 2.119803] bus: 'serio': add device serio0 [ 2.119814] PM: Adding info for serio:serio0 [ 2.119842] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.119852] device: 'serio1': device_add [ 2.119870] bus: 'serio': add device serio1 [ 2.119879] PM: Adding info for serio:serio1 [ 2.119905] driver: 'i8042': driver_bound: bound to device 'i8042' [ 2.119913] bus: 'platform': really_probe: bound device i8042 to driver i8042 [ 2.119933] device: 'event0': device_add [ 2.119952] PM: Adding info for No Bus:event0 [ 2.120099] device: 'event1': device_add [ 2.120116] PM: Adding info for No Bus:event1 [ 2.120202] device: 'event2': device_add [ 2.120222] PM: Adding info for No Bus:event2 [ 2.120274] device: 'event3': device_add [ 2.120290] PM: Adding info for No Bus:event3 [ 2.120346] bus: 'serio': add driver atkbd [ 2.120371] bus: 'serio': driver_probe_device: matched device serio0 with driver atkbd [ 2.120374] bus: 'serio': really_probe: probing driver atkbd with device serio0 [ 2.120379] atkbd serio0: no default pinctrl state [ 2.120385] devices_kset: Moving serio0 to end of list [ 2.120423] bus: 'serio': add driver psmouse [ 2.120468] bus: 'pnp': add driver rtc_cmos [ 2.120476] bus: 'pnp': driver_probe_device: matched device 00:03 with driver rtc_cmos [ 2.120479] bus: 'pnp': really_probe: probing driver rtc_cmos with device 00:03 [ 2.120484] rtc_cmos 00:03: no default pinctrl state [ 2.120491] devices_kset: Moving 00:03 to end of list [ 2.120508] rtc_cmos 00:03: RTC can wake from S4 [ 2.120657] device: 'rtc0': device_add [ 2.120686] PM: Adding info for No Bus:rtc0 [ 2.120737] rtc_cmos 00:03: registered as rtc0 [ 2.120745] device: 'cmos_nvram0': device_add [ 2.120754] bus: 'nvmem': add device cmos_nvram0 [ 2.120765] PM: Adding info for nvmem:cmos_nvram0 [ 2.120777] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.120779] driver: 'rtc_cmos': driver_bound: bound to device '00:03' [ 2.120785] bus: 'pnp': really_probe: bound device 00:03 to driver rtc_cmos [ 2.121181] Registering platform device 'efivars.0'. Parent at platform [ 2.121183] device: 'efivars.0': device_add [ 2.121189] bus: 'platform': add device efivars.0 [ 2.121221] PM: Adding info for platform:efivars.0 [ 2.121277] bus: 'hid': registered [ 2.121281] device class 'hidraw': registering [ 2.121290] hidraw: raw HID events driver (C) Jiri Kosina [ 2.121293] bus: 'hid': add driver hid-generic [ 2.121311] bus: 'hid': add driver magicmouse [ 2.121330] bus: 'hid': add driver ntrig [ 2.121350] bus: 'usb': add driver usbhid [ 2.121372] usbcore: registered new interface driver usbhid [ 2.121373] usbhid: USB HID core driver [ 2.121479] device class 'powercap': registering [ 2.121496] device: 'timer': device_add [ 2.121517] PM: Adding info for No Bus:timer [ 2.121585] bus: 'hdaudio': add driver snd_hda_codec_generic [ 2.121598] bus: 'hdaudio': add driver snd_hda_codec_realtek [ 2.121609] bus: 'hdaudio': add driver snd_hda_codec_hdmi [ 2.121620] bus: 'pci': add driver snd_hda_intel [ 2.121629] bus: 'pci': driver_probe_device: matched device 0000:00:01.1 with driver snd_hda_intel [ 2.121633] bus: 'pci': really_probe: probing driver snd_hda_intel with device 0000:00:01.1 [ 2.121637] snd_hda_intel 0000:00:01.1: no default pinctrl state [ 2.121645] devices_kset: Moving 0000:00:01.1 to end of list [ 2.121885] snd_hda_intel 0000:00:01.1: Force to non-snoop mode [ 2.121893] driver: 'snd_hda_intel': driver_bound: bound to device '0000:00:01.1' [ 2.121906] bus: 'pci': really_probe: bound device 0000:00:01.1 to driver snd_hda_intel [ 2.121923] bus: 'pci': driver_probe_device: matched device 0000:00:14.2 with driver snd_hda_intel [ 2.121926] bus: 'pci': really_probe: probing driver snd_hda_intel with device 0000:00:14.2 [ 2.121930] snd_hda_intel 0000:00:14.2: no default pinctrl state [ 2.121938] devices_kset: Moving 0000:00:14.2 to end of list [ 2.122482] device: 'input4': device_add [ 2.122530] PM: Adding info for No Bus:input4 [ 2.122570] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.122582] device: 'input4::numlock': device_add [ 2.122602] PM: Adding info for No Bus:input4::numlock [ 2.122623] device: 'input4::capslock': device_add [ 2.122641] PM: Adding info for No Bus:input4::capslock [ 2.122658] device: 'input4::scrolllock': device_add [ 2.122680] PM: Adding info for No Bus:input4::scrolllock [ 2.122698] device: 'event4': device_add [ 2.122712] PM: Adding info for No Bus:event4 [ 2.122748] driver: 'snd_hda_intel': driver_bound: bound to device '0000:00:14.2' [ 2.122764] driver: 'atkbd': driver_bound: bound to device 'serio0' [ 2.122774] bus: 'serio': really_probe: bound device serio0 to driver atkbd [ 2.122778] bus: 'serio': driver_probe_device: matched device serio1 with driver atkbd [ 2.122781] bus: 'serio': really_probe: probing driver atkbd with device serio1 [ 2.122786] atkbd serio1: no default pinctrl state [ 2.122795] devices_kset: Moving serio1 to end of list [ 2.122991] bus: 'pci': really_probe: bound device 0000:00:14.2 to driver snd_hda_intel [ 2.123266] Initializing XFRM netlink socket [ 2.123538] NET: Registered protocol family 10 [ 2.124600] device: 'hdaudioC0D0': device_add [ 2.124626] bus: 'hdaudio': add device hdaudioC0D0 [ 2.124641] PM: Adding info for hdaudio:hdaudioC0D0 [ 2.124659] bus: 'hdaudio': driver_probe_device: matched device hdaudioC0D0 with driver snd_hda_codec_hdmi [ 2.124662] bus: 'hdaudio': really_probe: probing driver snd_hda_codec_hdmi with device hdaudioC0D0 [ 2.124669] snd_hda_codec_hdmi hdaudioC0D0: no default pinctrl state [ 2.124678] devices_kset: Moving hdaudioC0D0 to end of list [ 2.127079] driver: 'snd_hda_codec_hdmi': driver_bound: bound to device 'hdaudioC0D0' [ 2.127107] bus: 'hdaudio': really_probe: bound device hdaudioC0D0 to driver snd_hda_codec_hdmi [ 2.127224] device: 'card0': device_add [ 2.127259] PM: Adding info for No Bus:card0 [ 2.127269] device: 'controlC0': device_add [ 2.127284] PM: Adding info for No Bus:controlC0 [ 2.127782] atkbd: probe of serio1 rejects match -19 [ 2.127792] bus: 'serio': driver_probe_device: matched device serio1 with driver psmouse [ 2.127796] bus: 'serio': really_probe: probing driver psmouse with device serio1 [ 2.127808] psmouse serio1: no default pinctrl state [ 2.127819] devices_kset: Moving serio1 to end of list [ 2.127958] device: 'pcmC0D3p': device_add [ 2.127977] PM: Adding info for No Bus:pcmC0D3p [ 2.128081] device: 'input6': device_add [ 2.128127] PM: Adding info for No Bus:input6 [ 2.128153] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6 [ 2.128165] device: 'event5': device_add [ 2.128182] PM: Adding info for No Bus:event5 [ 2.130540] random: fast init done [ 2.130712] Segment Routing with IPv6 [ 2.130772] mip6: Mobile IPv6 [ 2.130780] NET: Registered protocol family 17 [ 2.130927] bus: 'machinecheck': registered [ 2.130932] device: 'machinecheck': device_add [ 2.130949] PM: Adding info for No Bus:machinecheck [ 2.132612] device: 'hdaudioC1D0': device_add [ 2.132641] bus: 'hdaudio': add device hdaudioC1D0 [ 2.132661] PM: Adding info for hdaudio:hdaudioC1D0 [ 2.132677] bus: 'hdaudio': driver_probe_device: matched device hdaudioC1D0 with driver snd_hda_codec_realtek [ 2.132681] bus: 'hdaudio': really_probe: probing driver snd_hda_codec_realtek with device hdaudioC1D0 [ 2.132688] snd_hda_codec_realtek hdaudioC1D0: no default pinctrl state [ 2.132697] devices_kset: Moving hdaudioC1D0 to end of list [ 2.133156] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 2.133167] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.133172] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 2.133176] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 2.133179] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 2.133184] snd_hda_codec_realtek hdaudioC1D0: Mic=0x18 [ 2.133189] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 2.136031] device: 'machinecheck0': device_add [ 2.136047] bus: 'machinecheck': add device machinecheck0 [ 2.136067] PM: Adding info for machinecheck:machinecheck0 [ 2.136162] device: 'machinecheck1': device_add [ 2.136176] bus: 'machinecheck': add device machinecheck1 [ 2.136190] PM: Adding info for machinecheck:machinecheck1 [ 2.136249] device: 'machinecheck2': device_add [ 2.136259] bus: 'machinecheck': add device machinecheck2 [ 2.136274] PM: Adding info for machinecheck:machinecheck2 [ 2.136337] device: 'machinecheck3': device_add [ 2.136349] bus: 'machinecheck': add device machinecheck3 [ 2.136364] PM: Adding info for machinecheck:machinecheck3 [ 2.136654] microcode: microcode updated early to new patch_level=0x0700010f [ 2.136664] Registering platform device 'microcode'. Parent at platform [ 2.136667] device: 'microcode': device_add [ 2.136677] bus: 'platform': add device microcode [ 2.136697] PM: Adding info for platform:microcode [ 2.136749] microcode: CPU0: patch_level=0x0700010f [ 2.136767] microcode: CPU1: patch_level=0x0700010f [ 2.136779] microcode: CPU2: patch_level=0x0700010f [ 2.136824] microcode: CPU3: patch_level=0x0700010f [ 2.136839] device: 'microcode': device_add [ 2.136861] PM: Adding info for No Bus:microcode [ 2.137104] microcode: Microcode Update Driver: v2.2. [ 2.137137] sched_clock: Marking stable (2137081044, 0)->(2238632573, -101551529) [ 2.137409] device: 'cpu_dma_latency': device_add [ 2.137445] PM: Adding info for No Bus:cpu_dma_latency [ 2.137519] device: 'network_latency': device_add [ 2.137540] PM: Adding info for No Bus:network_latency [ 2.137607] device: 'network_throughput': device_add [ 2.137625] PM: Adding info for No Bus:network_throughput [ 2.137688] device: 'memory_bandwidth': device_add [ 2.137714] PM: Adding info for No Bus:memory_bandwidth [ 2.137816] registered taskstats version 1 [ 2.137819] Loading compiled-in X.509 certificates [ 2.148133] Loaded X.509 cert 'Build time autogenerated kernel key: a04651bf5383fc58f37bd33b4bd0890682cb60de' [ 2.154280] driver: 'snd_hda_codec_realtek': driver_bound: bound to device 'hdaudioC1D0' [ 2.154313] bus: 'hdaudio': really_probe: bound device hdaudioC1D0 to driver snd_hda_codec_realtek [ 2.154823] device: 'card1': device_add [ 2.154859] PM: Adding info for No Bus:card1 [ 2.154871] device: 'controlC1': device_add [ 2.154893] PM: Adding info for No Bus:controlC1 [ 2.155110] Key type big_key registered [ 2.155122] device: 'pcmC1D0p': device_add [ 2.155145] PM: Adding info for No Bus:pcmC1D0p [ 2.157881] device: 'pcmC1D0c': device_add [ 2.157911] PM: Adding info for No Bus:pcmC1D0c [ 2.160677] Key type encrypted registered [ 2.160794] device: 'input8': device_add [ 2.160884] PM: Adding info for No Bus:input8 [ 2.160920] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8 [ 2.160939] device: 'event6': device_add [ 2.160966] PM: Adding info for No Bus:event6 [ 2.163600] rtc_cmos 00:03: setting system clock to 2018-06-13 18:56:42 UTC (1528916202) [ 2.163627] device: 'input9': device_add [ 2.163701] PM: Adding info for No Bus:input9 [ 2.163732] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input9 [ 2.163741] device: 'event7': device_add [ 2.163768] PM: Adding info for No Bus:event7 [ 2.163793] ALSA device list: [ 2.163797] #0: HDA ATI HDMI at 0xfeb64000 irq 35 [ 2.293518] ata2: SATA link down (SStatus 0 SControl 300) [ 2.447078] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.447419] ata1.00: supports DRM functions and may not be fully accessible [ 2.448782] ata1.00: ATA-10: Crucial_CT500MX200SSD3, MU01, max UDMA/133 [ 2.448786] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.453099] ata1.00: supports DRM functions and may not be fully accessible [ 2.458430] ata1.00: configured for UDMA/133 [ 2.458811] scsi 0:0:0:0: Direct-Access ATA Crucial_CT500MX2 MU01 PQ: 0 ANSI: 5 [ 2.458970] device: 'target0:0:0': device_add [ 2.458994] bus: 'scsi': add device target0:0:0 [ 2.459026] PM: Adding info for scsi:target0:0:0 [ 2.459053] device: '0:0:0:0': device_add [ 2.459102] bus: 'scsi': add device 0:0:0:0 [ 2.459115] PM: Adding info for scsi:0:0:0:0 [ 2.459126] device: '0:0:0:0': device_add [ 2.459149] PM: Adding info for No Bus:0:0:0:0 [ 2.459175] device: 'sg0': device_add [ 2.459195] PM: Adding info for No Bus:sg0 [ 2.459303] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.459310] device: '0:0:0:0': device_add [ 2.459334] PM: Adding info for No Bus:0:0:0:0 [ 2.461726] Freeing unused kernel memory: 1140K [ 2.461733] Write protecting the kernel read-only data: 16384k [ 2.463104] tsc: Refined TSC clocksource calibration: 998.127 MHz [ 2.463123] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cc65b93289, max_idle_ns: 881590487074 ns [ 2.463181] clocksource: Switched to clocksource tsc [ 2.463450] Freeing unused kernel memory: 2012K [ 2.472964] Freeing unused kernel memory: 1728K [ 2.520745] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 2.535377] systemd[1]: Detected architecture x86-64. [ 2.535386] systemd[1]: Running in initial RAM disk. [ 2.547555] systemd[1]: Set hostname to . [ 2.575082] usb 3-2: new full-speed USB device number 2 using ohci-pci [ 2.597033] usb 4-2: new full-speed USB device number 2 using ohci-pci [ 2.689603] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x575f05) [ 2.698532] random: systemd: uninitialized urandom read (16 bytes read) [ 2.698671] systemd[1]: Listening on udev Kernel Socket. [ 2.698792] random: systemd: uninitialized urandom read (16 bytes read) [ 2.698813] systemd[1]: Reached target Timers. [ 2.698838] random: systemd: uninitialized urandom read (16 bytes read) [ 2.701799] systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice. [ 2.701850] systemd[1]: Reached target Swap. [ 2.702079] systemd[1]: Listening on udev Control Socket. [ 2.702124] systemd[1]: Reached target Slices. [ 2.702797] psmouse serio1: elantech: Synaptics capabilities query result 0x10, 0x15, 0x0e. [ 2.723068] psmouse serio1: elantech: Elan sample query result 10, 01, 97 [ 2.746322] audit: type=1130 audit(1528916203.084:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 2.749225] usb 3-2: New USB device found, idVendor=04f3, idProduct=012e, bcdDevice= 0.13 [ 2.749230] usb 3-2: New USB device strings: Mfr=4, Product=14, SerialNumber=0 [ 2.749234] usb 3-2: Product: Touchscreen [ 2.749238] usb 3-2: Manufacturer: ELAN [ 2.749246] device: '3-2': device_add [ 2.749321] bus: 'usb': add device 3-2 [ 2.749343] PM: Adding info for usb:3-2 [ 2.749515] bus: 'usb': driver_probe_device: matched device 3-2 with driver usb [ 2.749520] bus: 'usb': really_probe: probing driver usb with device 3-2 [ 2.749530] usb 3-2: no default pinctrl state [ 2.749544] devices_kset: Moving 3-2 to end of list [ 2.751259] device: '3-2:1.0': device_add [ 2.751286] bus: 'usb': add device 3-2:1.0 [ 2.751298] PM: Adding info for usb:3-2:1.0 [ 2.751342] bus: 'usb': driver_probe_device: matched device 3-2:1.0 with driver usbhid [ 2.751346] bus: 'usb': really_probe: probing driver usbhid with device 3-2:1.0 [ 2.751353] usbhid 3-2:1.0: no default pinctrl state [ 2.751364] devices_kset: Moving 3-2:1.0 to end of list [ 2.754242] usb 4-2: New USB device found, idVendor=0cf3, idProduct=3004, bcdDevice= 0.01 [ 2.754247] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.754252] device: '4-2': device_add [ 2.754319] bus: 'usb': add device 4-2 [ 2.754343] PM: Adding info for usb:4-2 [ 2.754479] bus: 'usb': driver_probe_device: matched device 4-2 with driver usb [ 2.754483] bus: 'usb': really_probe: probing driver usb with device 4-2 [ 2.754490] usb 4-2: no default pinctrl state [ 2.754501] devices_kset: Moving 4-2 to end of list [ 2.756241] device: '4-2:1.0': device_add [ 2.756287] bus: 'usb': add device 4-2:1.0 [ 2.756298] PM: Adding info for usb:4-2:1.0 [ 2.756349] device: 'ep_81': device_add [ 2.756384] PM: Adding info for No Bus:ep_81 [ 2.756392] device: 'ep_82': device_add [ 2.756427] PM: Adding info for No Bus:ep_82 [ 2.756435] device: 'ep_02': device_add [ 2.756465] PM: Adding info for No Bus:ep_02 [ 2.756470] device: '4-2:1.1': device_add [ 2.756508] bus: 'usb': add device 4-2:1.1 [ 2.756518] PM: Adding info for usb:4-2:1.1 [ 2.756553] device: 'ep_83': device_add [ 2.756590] PM: Adding info for No Bus:ep_83 [ 2.756598] device: 'ep_03': device_add [ 2.756628] PM: Adding info for No Bus:ep_03 [ 2.756637] driver: 'usb': driver_bound: bound to device '4-2' [ 2.756667] bus: 'usb': really_probe: bound device 4-2 to driver usb [ 2.756690] device: 'ep_00': device_add [ 2.756728] PM: Adding info for No Bus:ep_00 [ 2.763444] device: '0003:04F3:012E.0001': device_add [ 2.763472] bus: 'hid': add device 0003:04F3:012E.0001 [ 2.763500] PM: Adding info for hid:0003:04F3:012E.0001 [ 2.763551] bus: 'hid': driver_probe_device: matched device 0003:04F3:012E.0001 with driver hid-generic [ 2.763558] bus: 'hid': really_probe: probing driver hid-generic with device 0003:04F3:012E.0001 [ 2.763572] hid-generic 0003:04F3:012E.0001: no default pinctrl state [ 2.763584] devices_kset: Moving 0003:04F3:012E.0001 to end of list [ 2.766462] device: 'input10': device_add [ 2.766548] PM: Adding info for No Bus:input10 [ 2.766626] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:04F3:012E.0001/input/input10 [ 2.766646] device: 'event8': device_add [ 2.766671] PM: Adding info for No Bus:event8 [ 2.766775] device class 'usbmisc': registering [ 2.766802] device: 'hiddev0': device_add [ 2.766827] PM: Adding info for No Bus:hiddev0 [ 2.766912] device: 'hidraw0': device_add [ 2.766940] PM: Adding info for No Bus:hidraw0 [ 2.767026] hid-generic 0003:04F3:012E.0001: input,hiddev96,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:12.0-2/input0 [ 2.767033] driver: 'hid-generic': driver_bound: bound to device '0003:04F3:012E.0001' [ 2.767060] bus: 'hid': really_probe: bound device 0003:04F3:012E.0001 to driver hid-generic [ 2.767074] driver: 'usbhid': driver_bound: bound to device '3-2:1.0' [ 2.767104] bus: 'usb': really_probe: bound device 3-2:1.0 to driver usbhid [ 2.767114] device: 'ep_81': device_add [ 2.767142] PM: Adding info for No Bus:ep_81 [ 2.767148] device: 'ep_02': device_add [ 2.767177] PM: Adding info for No Bus:ep_02 [ 2.767183] driver: 'usb': driver_bound: bound to device '3-2' [ 2.767206] bus: 'usb': really_probe: bound device 3-2 to driver usb [ 2.767226] device: 'ep_00': device_add [ 2.767252] PM: Adding info for No Bus:ep_00 [ 2.796480] device: 'input7': device_add [ 2.796577] PM: Adding info for No Bus:input7 [ 2.796658] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7 [ 2.796681] device: 'event9': device_add [ 2.796713] PM: Adding info for No Bus:event9 [ 2.799679] driver: 'psmouse': driver_bound: bound to device 'serio1' [ 2.799722] bus: 'serio': really_probe: bound device serio1 to driver psmouse [ 2.958080] audit: type=1130 audit(1528916203.295:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.008071] audit: type=1130 audit(1528916203.345:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.019718] audit: type=1130 audit(1528916203.357:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.019767] audit: type=1131 audit(1528916203.357:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.048751] audit: type=1130 audit(1528916203.386:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.080097] audit: type=1130 audit(1528916203.418:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.129058] bus: 'hid': add driver hid-multitouch [ 3.129272] PM: Removing info for No Bus:event8 [ 3.138581] PM: Removing info for No Bus:input10 [ 3.138681] device: 'hiddev0': device_unregister [ 3.139316] PM: Removing info for No Bus:hiddev0 [ 3.139348] device: 'hiddev0': device_create_release [ 3.139352] device class 'usbmisc': unregistering [ 3.139367] class 'usbmisc': release. [ 3.139370] class_create_release called for usbmisc [ 3.139378] device: 'hidraw0': device_unregister [ 3.139674] PM: Removing info for No Bus:hidraw0 [ 3.139704] device: 'hidraw0': device_create_release [ 3.140424] bus: 'hid': driver_probe_device: matched device 0003:04F3:012E.0001 with driver hid-generic [ 3.140433] bus: 'hid': really_probe: probing driver hid-generic with device 0003:04F3:012E.0001 [ 3.140447] hid-generic 0003:04F3:012E.0001: no default pinctrl state [ 3.140468] devices_kset: Moving 0003:04F3:012E.0001 to end of list [ 3.140486] hid-generic: probe of 0003:04F3:012E.0001 rejects match -19 [ 3.140497] bus: 'hid': driver_probe_device: matched device 0003:04F3:012E.0001 with driver hid-multitouch [ 3.140505] bus: 'hid': really_probe: probing driver hid-multitouch with device 0003:04F3:012E.0001 [ 3.140511] hid-multitouch 0003:04F3:012E.0001: no default pinctrl state [ 3.140522] devices_kset: Moving 0003:04F3:012E.0001 to end of list [ 3.146370] device: 'input11': device_add [ 3.146450] PM: Adding info for No Bus:input11 [ 3.146520] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:04F3:012E.0001/input/input11 [ 3.146538] device: 'event8': device_add [ 3.146558] PM: Adding info for No Bus:event8 [ 3.146677] device class 'usbmisc': registering [ 3.146703] device: 'hiddev0': device_add [ 3.146725] PM: Adding info for No Bus:hiddev0 [ 3.146811] device: 'hidraw0': device_add [ 3.146835] PM: Adding info for No Bus:hidraw0 [ 3.146906] hid-multitouch 0003:04F3:012E.0001: input,hiddev96,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:12.0-2/input0 [ 3.146920] driver: 'hid-multitouch': driver_bound: bound to device '0003:04F3:012E.0001' [ 3.146966] bus: 'hid': really_probe: bound device 0003:04F3:012E.0001 to driver hid-multitouch [ 3.210064] usb 1-3: new high-speed USB device number 3 using ehci-pci [ 3.210105] usb 2-3: new high-speed USB device number 3 using ehci-pci [ 3.339801] usb 1-3: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60 [ 3.339809] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.339812] usb 1-3: Product: USB2.0-CRW [ 3.339815] usb 1-3: Manufacturer: Generic [ 3.339819] usb 1-3: SerialNumber: 20100201396000000 [ 3.339827] device: '1-3': device_add [ 3.339897] bus: 'usb': add device 1-3 [ 3.339915] PM: Adding info for usb:1-3 [ 3.342671] bus: 'usb': driver_probe_device: matched device 1-3 with driver usb [ 3.342676] bus: 'usb': really_probe: probing driver usb with device 1-3 [ 3.342685] usb 1-3: no default pinctrl state [ 3.342696] devices_kset: Moving 1-3 to end of list [ 3.343662] device: '1-3:1.0': device_add [ 3.343685] bus: 'usb': add device 1-3:1.0 [ 3.343693] PM: Adding info for usb:1-3:1.0 [ 3.343820] device: 'ep_01': device_add [ 3.343846] PM: Adding info for No Bus:ep_01 [ 3.343852] device: 'ep_82': device_add [ 3.343871] PM: Adding info for No Bus:ep_82 [ 3.343878] device: 'ep_83': device_add [ 3.343901] PM: Adding info for No Bus:ep_83 [ 3.343908] driver: 'usb': driver_bound: bound to device '1-3' [ 3.343929] bus: 'usb': really_probe: bound device 1-3 to driver usb [ 3.343944] device: 'ep_00': device_add [ 3.343965] PM: Adding info for No Bus:ep_00 [ 3.423696] usb 2-3: New USB device found, idVendor=2232, idProduct=1054, bcdDevice= 0.15 [ 3.423705] usb 2-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 3.423709] usb 2-3: Product: WebCam SC-10HDD13335N [ 3.423713] usb 2-3: Manufacturer: Generic [ 3.423716] usb 2-3: SerialNumber: 200901010001 [ 3.423726] device: '2-3': device_add [ 3.423793] bus: 'usb': add device 2-3 [ 3.423815] PM: Adding info for usb:2-3 [ 3.423998] bus: 'usb': driver_probe_device: matched device 2-3 with driver usb [ 3.424025] bus: 'usb': really_probe: probing driver usb with device 2-3 [ 3.424036] usb 2-3: no default pinctrl state [ 3.424050] devices_kset: Moving 2-3 to end of list [ 3.427448] device: '2-3:1.0': device_add [ 3.427496] bus: 'usb': add device 2-3:1.0 [ 3.427515] PM: Adding info for usb:2-3:1.0 [ 3.428629] device: 'ep_83': device_add [ 3.428662] PM: Adding info for No Bus:ep_83 [ 3.428667] device: '2-3:1.1': device_add [ 3.428697] bus: 'usb': add device 2-3:1.1 [ 3.428706] PM: Adding info for usb:2-3:1.1 [ 3.428738] driver: 'usb': driver_bound: bound to device '2-3' [ 3.428765] bus: 'usb': really_probe: bound device 2-3 to driver usb [ 3.428795] device: 'ep_00': device_add [ 3.428821] PM: Adding info for No Bus:ep_00 [ 3.451072] audit: type=1130 audit(1528916203.788:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.490434] audit: type=1130 audit(1528916203.827:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.622852] bus: 'serio': add driver serio_raw [ 3.704902] device class 'scsi_disk': registering [ 3.704952] bus: 'scsi': add driver sd [ 3.704967] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver sd [ 3.704975] bus: 'scsi': really_probe: probing driver sd with device 0:0:0:0 [ 3.704986] sd 0:0:0:0: no default pinctrl state [ 3.704998] devices_kset: Moving 0:0:0:0 to end of list [ 3.705055] device: '0:0:0:0': device_add [ 3.705109] PM: Adding info for No Bus:0:0:0:0 [ 3.705145] driver: 'sd': driver_bound: bound to device '0:0:0:0' [ 3.705246] ata1.00: Enabling discard_zeroes_data [ 3.705456] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 3.705461] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.705499] sd 0:0:0:0: [sda] Write Protect is off [ 3.705505] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.705571] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.705713] device: '8:0': device_add [ 3.705745] PM: Adding info for No Bus:8:0 [ 3.705763] device: 'sda': device_add [ 3.705805] PM: Adding info for No Bus:sda [ 3.705967] ata1.00: Enabling discard_zeroes_data [ 3.708068] sda: sda1 sda2 sda3 sda4 sda5 sda6 [ 3.708100] device: 'sda1': device_add [ 3.708146] PM: Adding info for No Bus:sda1 [ 3.708212] device: 'sda2': device_add [ 3.708245] PM: Adding info for No Bus:sda2 [ 3.708298] device: 'sda3': device_add [ 3.708325] PM: Adding info for No Bus:sda3 [ 3.708376] device: 'sda4': device_add [ 3.708407] PM: Adding info for No Bus:sda4 [ 3.708457] device: 'sda5': device_add [ 3.708489] PM: Adding info for No Bus:sda5 [ 3.708541] device: 'sda6': device_add [ 3.708568] PM: Adding info for No Bus:sda6 [ 3.708960] ata1.00: Enabling discard_zeroes_data [ 3.709393] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.711463] bus: 'scsi': really_probe: bound device 0:0:0:0 to driver sd [ 3.848476] bus: 'pci': add driver r8169 [ 3.848529] bus: 'pci': driver_probe_device: matched device 0000:01:00.0 with driver r8169 [ 3.848539] bus: 'pci': really_probe: probing driver r8169 with device 0000:01:00.0 [ 3.848556] r8169 0000:01:00.0: no default pinctrl state [ 3.848575] devices_kset: Moving 0000:01:00.0 to end of list [ 3.848582] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.848609] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.853256] device: 'eth0': device_add [ 3.853365] PM: Adding info for No Bus:eth0 [ 3.853695] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0x (ptrval), 18:67:b0:b1:15:dd, XID 0c000800 IRQ 36 [ 3.853701] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.853717] driver: 'r8169': driver_bound: bound to device '0000:01:00.0' [ 3.853903] bus: 'pci': really_probe: bound device 0000:01:00.0 to driver r8169 [ 3.858310] r8169 0000:01:00.0 enp1s0: renamed from eth0 [ 3.858320] net eth0: renaming to enp1s0 [ 4.630587] device class 'drm': registering [ 4.839629] device: 'ttm': device_add [ 4.839661] PM: Adding info for No Bus:ttm [ 11.845867] [drm] amdgpu kernel modesetting enabled. [ 11.845881] bus: 'pci': add driver amdgpu [ 11.845913] bus: 'pci': driver_probe_device: matched device 0000:00:01.0 with driver amdgpu [ 11.845920] bus: 'pci': really_probe: probing driver amdgpu with device 0000:00:01.0 [ 11.845932] amdgpu 0000:00:01.0: no default pinctrl state [ 11.845948] devices_kset: Moving 0000:00:01.0 to end of list [ 11.849098] checking generic (c0000000 420000) vs hw (c0000000 10000000) [ 11.849103] fb: switching to amdgpudrmfb from EFI VGA [ 11.849200] Console: switching to colour dummy device 80x25 [ 11.849213] device: 'fb0': device_unregister [ 11.849333] PM: Removing info for No Bus:fb0 [ 11.849393] device: 'fb0': device_create_release [ 11.849421] device: 'vtcon1': device_unregister [ 11.849442] PM: Removing info for No Bus:vtcon1 [ 11.849457] device: 'vtcon1': device_create_release [ 11.849838] device: 'renderD128': device_add [ 11.849866] PM: Adding info for No Bus:renderD128 [ 11.849961] device: 'card0': device_add [ 11.849979] PM: Adding info for No Bus:card0 [ 11.850722] [drm] initializing kernel modesetting (KABINI 0x1002:0x983D 0x144D:0xC730 0x00). [ 11.850747] [drm] register mmio base: 0xFEB00000 [ 11.850749] [drm] register mmio size: 262144 [ 11.850764] [drm] add ip block number 0 [ 11.850766] [drm] add ip block number 1 [ 11.850768] [drm] add ip block number 2 [ 11.850770] [drm] add ip block number 3 [ 11.850773] [drm] add ip block number 4 [ 11.850775] [drm] add ip block number 5 [ 11.850777] [drm] add ip block number 6 [ 11.850779] [drm] add ip block number 7 [ 11.850781] [drm] add ip block number 8 [ 11.878726] [drm] BIOS signature incorrect 0 0 [ 11.878795] ATOM BIOS: 113-C53500-103 [ 11.878857] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 11.878872] amdgpu 0000:00:01.0: VRAM: 512M 0x0000000F00000000 - 0x0000000F1FFFFFFF (512M used) [ 11.878876] amdgpu 0000:00:01.0: GTT: 1024M 0x0000001000000000 - 0x000000103FFFFFFF [ 11.878884] [drm] Detected VRAM RAM=512M, BAR=512M [ 11.878887] [drm] RAM width 64bits UNKNOWN [ 11.879109] [TTM] Zone kernel: Available graphics memory: 1736358 kiB [ 11.879112] [TTM] Initializing pool allocator [ 11.879122] [TTM] Initializing DMA pool allocator [ 11.879217] [drm] amdgpu: 512M of VRAM memory ready [ 11.879221] [drm] amdgpu: 2543M of GTT memory ready. [ 11.879228] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 11.879282] [drm] PCIE GART of 1024M enabled (table at 0x0000000F00040000). [ 11.879451] [drm] Internal thermal controller without fan control [ 11.879456] ui class: battery [ 11.879457] internal class: none [ 11.879462] caps: [ 11.879465] uvd vclk: 0 dclk: 0 [ 11.879468] power level 0 sclk: 20000 vddc: 3150 [ 11.879470] power level 1 sclk: 30000 vddc: 3200 [ 11.879471] status: [ 11.879473] ui class: performance [ 11.879474] internal class: none [ 11.879477] caps: [ 11.879480] uvd vclk: 0 dclk: 0 [ 11.879482] power level 0 sclk: 20000 vddc: 3150 [ 11.879484] power level 1 sclk: 30000 vddc: 3200 [ 11.879486] power level 2 sclk: 40000 vddc: 3600 [ 11.879486] status: [ 11.879489] ui class: none [ 11.879490] internal class: boot [ 11.879493] caps: [ 11.879495] uvd vclk: 0 dclk: 0 [ 11.879497] power level 0 sclk: 20000 vddc: 6125 [ 11.879498] status: c r b [ 11.879503] [drm] amdgpu: dpm initialized [ 11.881497] [drm] Found UVD firmware Version: 1.64 Family ID: 9 [ 11.882159] [drm] Found VCE firmware Version: 50.10 Binary ID: 2 [ 11.884018] [drm:amdgpu_dm_irq_init [amdgpu]] DM_IRQ [ 11.884221] [drm:dal_bios_parser_init_cmd_tbl [amdgpu]] Don't have set_dce_clock for v0 [ 11.884506] [drm:dc_create [amdgpu]] DC: create_links: connectors_num: physical:3, virtual:0 [ 11.884683] [drm:log_to_debug_console [amdgpu]] Connector[0] description:signal 8 [ 11.884862] [drm:log_to_debug_console [amdgpu]] Connector[1] description:signal 4 [ 11.885049] [drm:log_to_debug_console [amdgpu]] Unsupported Connector type:5! [ 11.895233] [drm:log_to_debug_console [amdgpu]] Display Core initialized [ 11.895238] [drm] Display Core initialized with v3.1.38! [ 11.895355] device: 'i2c-0': device_add [ 11.895388] bus: 'i2c': add device i2c-0 [ 11.895410] PM: Adding info for i2c:i2c-0 [ 11.895597] device: 'card0-Unknown-1': device_add [ 11.895632] PM: Adding info for No Bus:card0-Unknown-1 [ 11.895849] [drm:log_to_debug_console [amdgpu]] link=0, dc_sink_in= (null) is now Disconnected [ 11.895866] device: 'i2c-1': device_add [ 11.895886] bus: 'i2c': add device i2c-1 [ 11.895901] PM: Adding info for i2c:i2c-1 [ 11.895947] device: 'card0-HDMI-A-1': device_add [ 11.895986] PM: Adding info for No Bus:card0-HDMI-A-1 [ 11.932367] [drm:log_to_debug_console [amdgpu]] [Detect] [HDMIA][ConnIdx:1] PLB2712HDS: [Block 0] 00 FF FF FF FF FF FF 00 26 CD 02 66 01 01 01 01 32 13 01 03 81 3C 22 78 2A 35 85 A6 56 48 9A 24 12 50 54 BF EF 80 B3 00 A9 40 95 00 81 80 95 0F 71 4F 01 01 01 01 02 3A 80 18 71 38 2D 40 58 2C 45 00 56 50 21 00 00 1E 00 00 00 FF 00 31 31 30 35 31 39 35 30 30 30 37 32 31 00 00 00 FD 00 37 4C 1E 51 11 00 0A 20 20 20 20 20 20 00 00 00 FC 00 50 4C 42 32 37 31 32 48 44 53 0A 20 20 01 E2 ^ [ 11.932595] [drm:log_to_debug_console [amdgpu]] [Detect] [HDMIA][ConnIdx:1] PLB2712HDS: [Block 1] 02 03 22 F1 4F 1F 14 13 12 11 16 15 90 05 04 03 02 07 06 01 23 09 07 01 83 01 00 00 65 03 0C 00 10 00 02 3A 80 D0 72 38 2D 40 10 2C 45 80 56 50 21 00 00 1E 01 1D 80 D0 72 1C 16 20 10 2C 25 00 56 50 21 00 00 9E 01 1D 00 BC 52 D0 1E 20 B8 28 55 40 56 50 21 00 00 1E 8C 0A D0 90 20 40 31 20 0C 40 55 00 56 50 21 00 00 18 02 3A 80 18 71 38 2D 40 58 2C 45 00 56 50 21 00 00 1E 00 00 00 49 ^ [ 11.932766] [drm:log_to_debug_console [amdgpu]] dc_link_detect: manufacturer_id = CD26, product_id = 6602, serial_number = 1010101, manufacture_week = 50, manufacture_year = 19, display_name = PLB2712HDS, speaker_flag = 1, audio_mode_count = 1 [ 11.932934] [drm:log_to_debug_console [amdgpu]] dc_link_detect: mode number = 0, format_code = 1, channel_count = 2, sample_rate = 7, sample_size = 1 [ 11.933100] [drm:log_to_debug_console [amdgpu]] link=1, dc_sink_in= (ptrval) is now Connected [ 11.933164] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 11.933200] [drm:drm_add_display_info [drm]] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 11.933383] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: (ptrval) for: dal_src=78, irq context=1 [ 11.933550] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: (ptrval) for: dal_src=79, irq context=1 [ 11.933723] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: (ptrval) for: dal_src=80, irq context=1 [ 11.933889] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: (ptrval) for: dal_src=81, irq context=1 [ 11.934059] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: (ptrval) for: dal_src=82, irq context=1 [ 11.934239] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: (ptrval) for: dal_src=83, irq context=1 [ 11.934409] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: (ptrval) for: dal_src=26, irq context=1 [ 11.934575] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: (ptrval) for: dal_src=27, irq context=1 [ 11.934743] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: (ptrval) for: dal_src=28, irq context=1 [ 11.934908] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: (ptrval) for: dal_src=29, irq context=1 [ 11.935078] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: (ptrval) for: dal_src=30, irq context=1 [ 11.935256] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: (ptrval) for: dal_src=31, irq context=1 [ 11.935424] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: (ptrval) for: dal_src=1, irq context=0 [ 11.935589] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: (ptrval) for: dal_src=2, irq context=0 [ 11.935597] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 11.935599] [drm] Driver supports precise vblank timestamp query. [ 11.959048] [drm] UVD initialized successfully. [ 12.069254] switching from power state: [ 12.069258] ui class: none [ 12.069260] internal class: boot [ 12.069266] caps: [ 12.069270] uvd vclk: 0 dclk: 0 [ 12.069274] power level 0 sclk: 20000 vddc: 6125 [ 12.069276] status: c [ 12.069280] switching to power state: [ 12.069283] ui class: performance [ 12.069284] internal class: none [ 12.069288] caps: [ 12.069292] uvd vclk: 0 dclk: 0 [ 12.069295] power level 0 sclk: 20000 vddc: 3150 [ 12.069298] power level 1 sclk: 30000 vddc: 3200 [ 12.069300] power level 2 sclk: 40000 vddc: 3600 [ 12.069301] status: r [ 12.076417] [drm] VCE initialized successfully. [ 12.078625] [drm:drm_setup_crtcs [drm_kms_helper]] [ 12.078644] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:Unknown-1] [ 12.078664] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:Unknown-1] status updated from unknown to disconnected [ 12.078679] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:Unknown-1] disconnected [ 12.078698] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:45:HDMI-A-1] [ 12.078714] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:45:HDMI-A-1] status updated from unknown to connected [ 12.078756] [drm:drm_add_edid_modes [drm]] ELD monitor PLB2712HDS [ 12.078790] [drm:drm_add_edid_modes [drm]] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 [ 12.078820] [drm:drm_add_edid_modes [drm]] ELD size 36, SAD count 1 [ 12.078851] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 12.078882] [drm:drm_add_display_info [drm]] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 12.080410] [drm:drm_mode_debug_printmodeline [drm]] Modeline 49:"1920x1080i" 50 74250 1920 1936 1980 2640 1080 1084 1094 1125 0x40 0x15 [ 12.080439] [drm:drm_mode_prune_invalid [drm]] Not using 1920x1080i mode: NO_INTERLACE [ 12.080474] [drm:drm_mode_debug_printmodeline [drm]] Modeline 75:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 12.080502] [drm:drm_mode_prune_invalid [drm]] Not using 1920x1080i mode: NO_INTERLACE [ 12.080535] [drm:drm_mode_debug_printmodeline [drm]] Modeline 79:"720x576i" 0 13500 720 732 795 864 576 580 586 625 0x40 0x101a [ 12.080564] [drm:drm_mode_prune_invalid [drm]] Not using 720x576i mode: NO_INTERLACE [ 12.080597] [drm:drm_mode_debug_printmodeline [drm]] Modeline 82:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 12.080625] [drm:drm_mode_prune_invalid [drm]] Not using 1920x1080i mode: NO_INTERLACE [ 12.080658] [drm:drm_mode_debug_printmodeline [drm]] Modeline 86:"720x480i" 0 13500 720 739 801 858 480 488 494 525 0x40 0x101a [ 12.080686] [drm:drm_mode_prune_invalid [drm]] Not using 720x480i mode: NO_INTERLACE [ 12.080720] [drm:drm_mode_debug_printmodeline [drm]] Modeline 93:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 12.080748] [drm:drm_mode_prune_invalid [drm]] Not using 1920x1080i mode: NO_INTERLACE [ 12.080781] [drm:drm_mode_debug_printmodeline [drm]] Modeline 97:"720x480i" 60 13514 720 739 801 858 480 488 494 525 0x40 0x101a [ 12.080809] [drm:drm_mode_prune_invalid [drm]] Not using 720x480i mode: NO_INTERLACE [ 12.080836] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:45:HDMI-A-1] probed modes : [ 12.080869] [drm:drm_mode_debug_printmodeline [drm]] Modeline 47:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 12.080902] [drm:drm_mode_debug_printmodeline [drm]] Modeline 89:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 12.080934] [drm:drm_mode_debug_printmodeline [drm]] Modeline 48:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 12.080967] [drm:drm_mode_debug_printmodeline [drm]] Modeline 54:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 12.080999] [drm:drm_mode_debug_printmodeline [drm]] Modeline 53:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 12.081032] [drm:drm_mode_debug_printmodeline [drm]] Modeline 66:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 12.081086] [drm:drm_mode_debug_printmodeline [drm]] Modeline 56:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 12.081119] [drm:drm_mode_debug_printmodeline [drm]] Modeline 57:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6 [ 12.081155] [drm:drm_mode_debug_printmodeline [drm]] Modeline 55:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 12.081188] [drm:drm_mode_debug_printmodeline [drm]] Modeline 100:"1280x800" 60 148500 1280 2008 2052 2200 800 1084 1089 1125 0x40 0x5 [ 12.081221] [drm:drm_mode_debug_printmodeline [drm]] Modeline 58:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 12.081257] [drm:drm_mode_debug_printmodeline [drm]] Modeline 83:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 12.081289] [drm:drm_mode_debug_printmodeline [drm]] Modeline 94:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 12.081322] [drm:drm_mode_debug_printmodeline [drm]] Modeline 50:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 12.081358] [drm:drm_mode_debug_printmodeline [drm]] Modeline 67:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 12.081390] [drm:drm_mode_debug_printmodeline [drm]] Modeline 68:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 12.081423] [drm:drm_mode_debug_printmodeline [drm]] Modeline 69:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 12.081459] [drm:drm_mode_debug_printmodeline [drm]] Modeline 70:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 12.081491] [drm:drm_mode_debug_printmodeline [drm]] Modeline 71:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 12.081523] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 12.081559] [drm:drm_mode_debug_printmodeline [drm]] Modeline 59:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 12.081591] [drm:drm_mode_debug_printmodeline [drm]] Modeline 60:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 12.081624] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 12.081659] [drm:drm_mode_debug_printmodeline [drm]] Modeline 95:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 12.081692] [drm:drm_mode_debug_printmodeline [drm]] Modeline 84:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 12.081724] [drm:drm_mode_debug_printmodeline [drm]] Modeline 61:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 12.081760] [drm:drm_mode_debug_printmodeline [drm]] Modeline 62:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 12.081792] [drm:drm_mode_debug_printmodeline [drm]] Modeline 63:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 12.081825] [drm:drm_mode_debug_printmodeline [drm]] Modeline 91:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 12.081860] [drm:drm_mode_debug_printmodeline [drm]] Modeline 64:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 12.081893] [drm:drm_mode_debug_printmodeline [drm]] Modeline 65:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 12.081908] [drm:drm_setup_crtcs [drm_kms_helper]] connector 43 enabled? no [ 12.081926] [drm:drm_setup_crtcs [drm_kms_helper]] connector 45 enabled? yes [ 12.081941] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 45 [ 12.081956] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 45 0 [ 12.081970] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1920x1080 [ 12.081988] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 16384x16384 config [ 12.082007] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1920x1080 set on crtc 39 (0,0) [ 12.084210] [drm] fb mappable at 0xA042A000 [ 12.084213] [drm] vram apper at 0xA0000000 [ 12.084215] [drm] size 16588800 [ 12.084217] [drm] fb depth is 24 [ 12.084219] [drm] pitch is 7680 [ 12.084241] device: 'fb0': device_add [ 12.084292] PM: Adding info for No Bus:fb0 [ 12.084537] fbcon: amdgpudrmfb (fb0) is primary device [ 12.084587] device: 'vtcon1': device_add [ 12.084624] PM: Adding info for No Bus:vtcon1 [ 12.085094] [drm:log_to_debug_console [amdgpu]] dc_commit_state: 1 streams [ 12.085286] [drm:log_to_debug_console [amdgpu]] core_stream 0xf3036400: src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080, colorSpace:6 [ 12.085454] [drm:log_to_debug_console [amdgpu]] pix_clk_khz: 148500, h_total: 2200, v_total: 1125, pixelencoder:3, displaycolorDepth:2 [ 12.085620] [drm:log_to_debug_console [amdgpu]] sink name: PLB2712HDS, serial: 16843009 [ 12.085787] [drm:log_to_debug_console [amdgpu]] link: 1 [ 12.998055] switching from power state: [ 12.998060] ui class: performance [ 12.998061] internal class: none [ 12.998064] caps: [ 12.998068] uvd vclk: 0 dclk: 0 [ 12.998071] power level 0 sclk: 40000 vddc: 3150 [ 12.998073] power level 1 sclk: 40000 vddc: 3200 [ 12.998074] power level 2 sclk: 40000 vddc: 3600 [ 12.998075] status: c [ 12.998078] switching to power state: [ 12.998079] ui class: performance [ 12.998079] internal class: none [ 12.998081] caps: [ 12.998083] uvd vclk: 0 dclk: 0 [ 12.998085] power level 0 sclk: 20000 vddc: 3150 [ 12.998087] power level 1 sclk: 30000 vddc: 3200 [ 12.998089] power level 2 sclk: 40000 vddc: 3600 [ 12.998089] status: r [ 12.998299] [drm:log_to_debug_console [amdgpu]] dce_get_required_clocks_state: clocks unsupported disp_clk 681000 pix_clk 148500 [ 13.002696] WARNING: CPU: 3 PID: 300 at drivers/gpu/drm/amd/amdgpu/../display/dc/dm_services.h:132 generic_reg_update_ex+0x127/0x150 [amdgpu] [ 13.002699] Modules linked in: amdgpu(+) mfd_core chash i2c_algo_bit gpu_sched drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm r8169 mii sd_mod crc32c_intel serio_raw hid_multitouch [ 13.002728] CPU: 3 PID: 300 Comm: systemd-udevd Not tainted 4.17.1-025.dbg.x86_64+ #331 [ 13.002730] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 905S3G/906S3G/915S3G/NP915S3G-K01FR, BIOS P05RBV.071.130807.FL 08/07/2013 [ 13.002842] RIP: 0010:generic_reg_update_ex+0x127/0x150 [amdgpu] [ 13.002845] RSP: 0018:ffffa6ed012570b8 EFLAGS: 00010246 [ 13.002848] RAX: ffffa6ed012570d8 RBX: ffff946ef49fe880 RCX: 0000000000000000 [ 13.002850] RDX: 000000009ffffffc RSI: 0000000000000000 RDI: ffff946ef3b53400 [ 13.002852] RBP: ffffa6ed01257120 R08: 0000000000000000 R09: 0000000000000000 [ 13.002854] R10: 0000000000000001 R11: 00000000fffffffb R12: ffff946ef855e2d4 [ 13.002855] R13: 0000000000000000 R14: 0000000000000000 R15: ffff946ef2c3ac00 [ 13.002858] FS: 00007f32fac0f180(0000) GS:ffff946efed80000(0000) knlGS:0000000000000000 [ 13.002860] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 13.002862] CR2: 00007f8057237020 CR3: 0000000132dd6000 CR4: 00000000000406e0 [ 13.002863] Call Trace: [ 13.002989] dce110_stream_encoder_update_hdmi_info_packets+0x389/0x5c0 [amdgpu] [ 13.003105] dce110_update_info_frame+0x65/0x70 [amdgpu] [ 13.003218] dce110_apply_ctx_to_hw+0x77a/0xa20 [amdgpu] [ 13.003340] dc_commit_state+0x30d/0x5c0 [amdgpu] [ 13.003450] ? set_freesync_on_streams+0x61/0x250 [amdgpu] [ 13.003563] ? mod_freesync_set_user_enable+0x11a/0x150 [amdgpu] [ 13.003682] amdgpu_dm_atomic_commit_tail+0x31e/0xdb0 [amdgpu] [ 13.003782] ? amdgpu_bo_pin_restricted+0xc5/0x2d0 [amdgpu] [ 13.003902] ? dm_plane_helper_cleanup_fb+0x120/0x120 [amdgpu] [ 13.004019] ? dm_plane_helper_prepare_fb+0x204/0x270 [amdgpu] [ 13.004029] ? preempt_count_add+0x6f/0xb0 [ 13.004046] commit_tail+0x3d/0x70 [drm_kms_helper] [ 13.004060] drm_atomic_helper_commit+0x10e/0x120 [drm_kms_helper] [ 13.004177] amdgpu_dm_atomic_commit+0x82/0x90 [amdgpu] [ 13.004208] drm_atomic_commit+0x45/0x50 [drm] [ 13.004221] restore_fbdev_mode_atomic+0x1a5/0x210 [drm_kms_helper] [ 13.004235] restore_fbdev_mode+0x2c/0x140 [drm_kms_helper] [ 13.004248] drm_fb_helper_restore_fbdev_mode_unlocked+0x49/0x90 [drm_kms_helper] [ 13.004259] drm_fb_helper_set_par+0x28/0x50 [drm_kms_helper] [ 13.004267] fbcon_init+0x4a7/0x650 [ 13.004275] visual_init+0xd7/0x130 [ 13.004279] do_bind_con_driver+0x1e0/0x2b0 [ 13.004284] do_take_over_console+0x121/0x180 [ 13.004290] do_fbcon_takeover+0x57/0xb0 [ 13.004294] fbcon_event_notify+0x6ae/0x7f2 [ 13.004300] ? __kernfs_create_file+0x7c/0xb0 [ 13.004305] notifier_call_chain+0x47/0x70 [ 13.004310] __blocking_notifier_call_chain+0x46/0x70 [ 13.004314] blocking_notifier_call_chain+0x11/0x20 [ 13.004318] fb_notifier_call_chain+0x16/0x20 [ 13.004321] register_framebuffer+0x283/0x360 [ 13.004336] __drm_fb_helper_initial_config_and_unlock+0x203/0x3f0 [drm_kms_helper] [ 13.004349] drm_fb_helper_initial_config+0x30/0x40 [drm_kms_helper] [ 13.004451] amdgpu_fbdev_init+0xc3/0x100 [amdgpu] [ 13.004562] amdgpu_device_init.cold.24+0xbb5/0xd6e [amdgpu] [ 13.004571] ? alloc_pages_current+0x7c/0x100 [ 13.004669] amdgpu_driver_load_kms+0x63/0x1a0 [amdgpu] [ 13.004690] drm_dev_register+0x12e/0x170 [drm] [ 13.004788] amdgpu_pci_probe+0x136/0x1c0 [amdgpu] [ 13.004796] local_pci_probe+0x41/0x90 [ 13.004801] pci_device_probe+0x188/0x1a0 [ 13.004808] driver_probe_device.cold.11+0x2ce/0x3ed [ 13.004812] __driver_attach+0xca/0xd0 [ 13.004816] ? driver_probe_device+0x30/0x30 [ 13.004821] bus_for_each_dev+0x7f/0xc0 [ 13.004826] driver_attach+0x19/0x20 [ 13.004829] bus_add_driver.cold.14+0x1d2/0x1ec [ 13.004833] driver_register+0x6b/0xb3 [ 13.004836] ? 0xffffffffc036a000 [ 13.004840] __pci_register_driver+0x52/0x60 [ 13.004925] amdgpu_init+0x5d/0x1000 [amdgpu] [ 13.004931] do_one_initcall+0x46/0x16d [ 13.004935] ? __vunmap+0x7c/0xb0 [ 13.004939] ? vfree+0x29/0x70 [ 13.004943] ? kmem_cache_alloc+0xe2/0x130 [ 13.004950] do_init_module+0x56/0x1d0 [ 13.004954] load_module+0x201f/0x24e0 [ 13.004966] __do_sys_init_module+0x135/0x170 [ 13.004969] ? __do_sys_init_module+0x135/0x170 [ 13.004977] __x64_sys_init_module+0x15/0x20 [ 13.004980] do_syscall_64+0x48/0xf0 [ 13.004986] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 13.004989] RIP: 0033:0x7f32f9823a0a [ 13.004991] RSP: 002b:00007ffe34f4aef8 EFLAGS: 00000246 ORIG_RAX: 00000000000000af [ 13.004994] RAX: ffffffffffffffda RBX: 00005591f15d6410 RCX: 00007f32f9823a0a [ 13.004996] RDX: 00005591f15b2b40 RSI: 0000000007773446 RDI: 00007f32eae05010 [ 13.004998] RBP: 00005591f15b2b40 R08: 0000000000000007 R09: 0000000000000006 [ 13.005000] R10: 00005591f15ab010 R11: 0000000000000246 R12: 00007f32eae05010 [ 13.005001] R13: 00005591f15dd170 R14: 0000000000020000 R15: 0000000000000000 [ 13.005007] Code: 89 da 48 8b 07 48 8b 40 08 e8 66 e3 76 fc 89 d8 48 8b 74 24 18 65 48 33 34 25 28 00 00 00 75 20 48 83 c4 50 5b 41 5c 41 5d 5d c3 <0f> 0b e9 19 ff ff ff 44 89 e0 4d 89 cd 41 bc 01 00 00 00 eb 99 [ 13.005063] ---[ end trace 1de410066a9a019b ]--- [ 13.009475] WARNING: CPU: 3 PID: 300 at drivers/gpu/drm/amd/amdgpu/../display/dc/dm_services.h:132 generic_reg_update_ex+0x127/0x150 [amdgpu] [ 13.009476] Modules linked in: amdgpu(+) mfd_core chash i2c_algo_bit gpu_sched drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm r8169 mii sd_mod crc32c_intel serio_raw hid_multitouch [ 13.009495] CPU: 3 PID: 300 Comm: systemd-udevd Tainted: G W 4.17.1-025.dbg.x86_64+ #331 [ 13.009497] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 905S3G/906S3G/915S3G/NP915S3G-K01FR, BIOS P05RBV.071.130807.FL 08/07/2013 [ 13.009608] RIP: 0010:generic_reg_update_ex+0x127/0x150 [amdgpu] [ 13.009610] RSP: 0018:ffffa6ed01256fd8 EFLAGS: 00010246 [ 13.009613] RAX: ffffa6ed01256ff8 RBX: ffff946ef49fe880 RCX: 0000000000000000 [ 13.009614] RDX: 000000009ffffffc RSI: 0000000000000000 RDI: ffff946ef3b53400 [ 13.009616] RBP: ffffa6ed01257040 R08: 0000000000000000 R09: 0000000000000000 [ 13.009618] R10: 0000000000000001 R11: 0000000100005400 R12: ffff946ef855e2d4 [ 13.009620] R13: 0000000000000000 R14: 0000000000000000 R15: ffff946ef2c36c00 [ 13.009622] FS: 00007f32fac0f180(0000) GS:ffff946efed80000(0000) knlGS:0000000000000000 [ 13.009624] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 13.009626] CR2: 00007f8057237020 CR3: 0000000132dd6000 CR4: 00000000000406e0 [ 13.009627] Call Trace: [ 13.009740] ? generic_reg_update_ex+0x10a/0x150 [amdgpu] [ 13.009860] dce110_stream_encoder_update_hdmi_info_packets+0x389/0x5c0 [amdgpu] [ 13.009975] dce110_update_info_frame+0x65/0x70 [amdgpu] [ 13.010088] dce110_enable_stream+0x52/0xd0 [amdgpu] [ 13.010201] core_link_enable_stream+0xfa/0xd30 [amdgpu] [ 13.010319] ? dce110_stream_encoder_update_hdmi_info_packets+0x345/0x5c0 [amdgpu] [ 13.010436] dce110_apply_ctx_to_hw+0xa00/0xa20 [amdgpu] [ 13.010558] dc_commit_state+0x30d/0x5c0 [amdgpu] [ 13.010668] ? set_freesync_on_streams+0x61/0x250 [amdgpu] [ 13.010780] ? mod_freesync_set_user_enable+0x11a/0x150 [amdgpu] [ 13.010899] amdgpu_dm_atomic_commit_tail+0x31e/0xdb0 [amdgpu] [ 13.010999] ? amdgpu_bo_pin_restricted+0xc5/0x2d0 [amdgpu] [ 13.011119] ? dm_plane_helper_cleanup_fb+0x120/0x120 [amdgpu] [ 13.011237] ? dm_plane_helper_prepare_fb+0x204/0x270 [amdgpu] [ 13.011241] ? preempt_count_add+0x6f/0xb0 [ 13.011256] commit_tail+0x3d/0x70 [drm_kms_helper] [ 13.011269] drm_atomic_helper_commit+0x10e/0x120 [drm_kms_helper] [ 13.011387] amdgpu_dm_atomic_commit+0x82/0x90 [amdgpu] [ 13.011413] drm_atomic_commit+0x45/0x50 [drm] [ 13.011425] restore_fbdev_mode_atomic+0x1a5/0x210 [drm_kms_helper] [ 13.011440] restore_fbdev_mode+0x2c/0x140 [drm_kms_helper] [ 13.011452] drm_fb_helper_restore_fbdev_mode_unlocked+0x49/0x90 [drm_kms_helper] [ 13.011464] drm_fb_helper_set_par+0x28/0x50 [drm_kms_helper] [ 13.011468] fbcon_init+0x4a7/0x650 [ 13.011474] visual_init+0xd7/0x130 [ 13.011478] do_bind_con_driver+0x1e0/0x2b0 [ 13.011484] do_take_over_console+0x121/0x180 [ 13.011489] do_fbcon_takeover+0x57/0xb0 [ 13.011493] fbcon_event_notify+0x6ae/0x7f2 [ 13.011498] ? __kernfs_create_file+0x7c/0xb0 [ 13.011502] notifier_call_chain+0x47/0x70 [ 13.011506] __blocking_notifier_call_chain+0x46/0x70 [ 13.011511] blocking_notifier_call_chain+0x11/0x20 [ 13.011514] fb_notifier_call_chain+0x16/0x20 [ 13.011517] register_framebuffer+0x283/0x360 [ 13.011532] __drm_fb_helper_initial_config_and_unlock+0x203/0x3f0 [drm_kms_helper] [ 13.011545] drm_fb_helper_initial_config+0x30/0x40 [drm_kms_helper] [ 13.011646] amdgpu_fbdev_init+0xc3/0x100 [amdgpu] [ 13.011758] amdgpu_device_init.cold.24+0xbb5/0xd6e [amdgpu] [ 13.011763] ? alloc_pages_current+0x7c/0x100 [ 13.011862] amdgpu_driver_load_kms+0x63/0x1a0 [amdgpu] [ 13.011883] drm_dev_register+0x12e/0x170 [drm] [ 13.011981] amdgpu_pci_probe+0x136/0x1c0 [amdgpu] [ 13.011987] local_pci_probe+0x41/0x90 [ 13.011992] pci_device_probe+0x188/0x1a0 [ 13.011997] driver_probe_device.cold.11+0x2ce/0x3ed [ 13.012002] __driver_attach+0xca/0xd0 [ 13.012005] ? driver_probe_device+0x30/0x30 [ 13.012009] bus_for_each_dev+0x7f/0xc0 [ 13.012014] driver_attach+0x19/0x20 [ 13.012017] bus_add_driver.cold.14+0x1d2/0x1ec [ 13.012021] driver_register+0x6b/0xb3 [ 13.012024] ? 0xffffffffc036a000 [ 13.012028] __pci_register_driver+0x52/0x60 [ 13.012112] amdgpu_init+0x5d/0x1000 [amdgpu] [ 13.012117] do_one_initcall+0x46/0x16d [ 13.012120] ? __vunmap+0x7c/0xb0 [ 13.012124] ? vfree+0x29/0x70 [ 13.012127] ? kmem_cache_alloc+0xe2/0x130 [ 13.012132] do_init_module+0x56/0x1d0 [ 13.012136] load_module+0x201f/0x24e0 [ 13.012150] __do_sys_init_module+0x135/0x170 [ 13.012153] ? __do_sys_init_module+0x135/0x170 [ 13.012161] __x64_sys_init_module+0x15/0x20 [ 13.012164] do_syscall_64+0x48/0xf0 [ 13.012169] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 13.012171] RIP: 0033:0x7f32f9823a0a [ 13.012173] RSP: 002b:00007ffe34f4aef8 EFLAGS: 00000246 ORIG_RAX: 00000000000000af [ 13.012176] RAX: ffffffffffffffda RBX: 00005591f15d6410 RCX: 00007f32f9823a0a [ 13.012178] RDX: 00005591f15b2b40 RSI: 0000000007773446 RDI: 00007f32eae05010 [ 13.012180] RBP: 00005591f15b2b40 R08: 0000000000000007 R09: 0000000000000006 [ 13.012182] R10: 00005591f15ab010 R11: 0000000000000246 R12: 00007f32eae05010 [ 13.012184] R13: 00005591f15dd170 R14: 0000000000020000 R15: 0000000000000000 [ 13.012189] Code: 89 da 48 8b 07 48 8b 40 08 e8 66 e3 76 fc 89 d8 48 8b 74 24 18 65 48 33 34 25 28 00 00 00 75 20 48 83 c4 50 5b 41 5c 41 5d 5d c3 <0f> 0b e9 19 ff ff ff 44 89 e0 4d 89 cd 41 bc 01 00 00 00 eb 99 [ 13.012244] ---[ end trace 1de410066a9a019c ]--- [ 13.012443] [drm:log_to_debug_console [amdgpu]] [Mode] [HDMIA][ConnIdx:1] {1920x1080, 2200x1125@148500Khz}^ [ 13.012658] WARNING: CPU: 3 PID: 300 at drivers/gpu/drm/amd/amdgpu/../display/dc/dm_services.h:132 generic_reg_update_ex+0x127/0x150 [amdgpu] [ 13.012659] Modules linked in: amdgpu(+) mfd_core chash i2c_algo_bit gpu_sched drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm r8169 mii sd_mod crc32c_intel serio_raw hid_multitouch [ 13.012678] CPU: 3 PID: 300 Comm: systemd-udevd Tainted: G W 4.17.1-025.dbg.x86_64+ #331 [ 13.012680] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 905S3G/906S3G/915S3G/NP915S3G-K01FR, BIOS P05RBV.071.130807.FL 08/07/2013 [ 13.012790] RIP: 0010:generic_reg_update_ex+0x127/0x150 [amdgpu] [ 13.012792] RSP: 0018:ffffa6ed012571d8 EFLAGS: 00010246 [ 13.012795] RAX: ffffa6ed012571f8 RBX: ffff946ef49fe880 RCX: 0000000000000000 [ 13.012797] RDX: 000000009ffffffc RSI: 0000000000000000 RDI: ffff946ef3b53400 [ 13.012799] RBP: ffffa6ed01257240 R08: 0000000000000000 R09: 0000000000000000 [ 13.012800] R10: 0000000000000001 R11: 00000000fffffffb R12: ffff946ef855e2d4 [ 13.012802] R13: 0000000000000000 R14: 0000000000000000 R15: ffff946ef3036400 [ 13.012805] FS: 00007f32fac0f180(0000) GS:ffff946efed80000(0000) knlGS:0000000000000000 [ 13.012807] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 13.012808] CR2: 00007f8057237020 CR3: 0000000132dd6000 CR4: 00000000000406e0 [ 13.012810] Call Trace: [ 13.012931] dce110_stream_encoder_update_hdmi_info_packets+0x389/0x5c0 [amdgpu] [ 13.013047] dce110_update_info_frame+0x65/0x70 [amdgpu] [ 13.013159] dc_stream_adjust_vmin_vmax+0xb7/0xf0 [amdgpu] [ 13.013271] adjust_vmin_vmax.isra.5+0x54/0x60 [amdgpu] [ 13.013381] set_freesync_on_streams+0x61/0x250 [amdgpu] [ 13.013492] mod_freesync_notify_mode_change+0x110/0x140 [amdgpu] [ 13.013611] amdgpu_dm_atomic_commit_tail+0x4e4/0xdb0 [amdgpu] [ 13.013711] ? amdgpu_bo_pin_restricted+0xc5/0x2d0 [amdgpu] [ 13.013831] ? dm_plane_helper_cleanup_fb+0x120/0x120 [amdgpu] [ 13.013949] ? dm_plane_helper_prepare_fb+0x204/0x270 [amdgpu] [ 13.013953] ? preempt_count_add+0x6f/0xb0 [ 13.013968] commit_tail+0x3d/0x70 [drm_kms_helper] [ 13.013981] drm_atomic_helper_commit+0x10e/0x120 [drm_kms_helper] [ 13.014099] amdgpu_dm_atomic_commit+0x82/0x90 [amdgpu] [ 13.014124] drm_atomic_commit+0x45/0x50 [drm] [ 13.014137] restore_fbdev_mode_atomic+0x1a5/0x210 [drm_kms_helper] [ 13.014151] restore_fbdev_mode+0x2c/0x140 [drm_kms_helper] [ 13.014163] drm_fb_helper_restore_fbdev_mode_unlocked+0x49/0x90 [drm_kms_helper] [ 13.014175] drm_fb_helper_set_par+0x28/0x50 [drm_kms_helper] [ 13.014179] fbcon_init+0x4a7/0x650 [ 13.014186] visual_init+0xd7/0x130 [ 13.014189] do_bind_con_driver+0x1e0/0x2b0 [ 13.014195] do_take_over_console+0x121/0x180 [ 13.014201] do_fbcon_takeover+0x57/0xb0 [ 13.014204] fbcon_event_notify+0x6ae/0x7f2 [ 13.014209] ? __kernfs_create_file+0x7c/0xb0 [ 13.014213] notifier_call_chain+0x47/0x70 [ 13.014217] __blocking_notifier_call_chain+0x46/0x70 [ 13.014222] blocking_notifier_call_chain+0x11/0x20 [ 13.014225] fb_notifier_call_chain+0x16/0x20 [ 13.014228] register_framebuffer+0x283/0x360 [ 13.014243] __drm_fb_helper_initial_config_and_unlock+0x203/0x3f0 [drm_kms_helper] [ 13.014256] drm_fb_helper_initial_config+0x30/0x40 [drm_kms_helper] [ 13.014358] amdgpu_fbdev_init+0xc3/0x100 [amdgpu] [ 13.014469] amdgpu_device_init.cold.24+0xbb5/0xd6e [amdgpu] [ 13.014474] ? alloc_pages_current+0x7c/0x100 [ 13.014572] amdgpu_driver_load_kms+0x63/0x1a0 [amdgpu] [ 13.014594] drm_dev_register+0x12e/0x170 [drm] [ 13.014692] amdgpu_pci_probe+0x136/0x1c0 [amdgpu] [ 13.014698] local_pci_probe+0x41/0x90 [ 13.014703] pci_device_probe+0x188/0x1a0 [ 13.014708] driver_probe_device.cold.11+0x2ce/0x3ed [ 13.014712] __driver_attach+0xca/0xd0 [ 13.014716] ? driver_probe_device+0x30/0x30 [ 13.014720] bus_for_each_dev+0x7f/0xc0 [ 13.014724] driver_attach+0x19/0x20 [ 13.014727] bus_add_driver.cold.14+0x1d2/0x1ec [ 13.014732] driver_register+0x6b/0xb3 [ 13.014734] ? 0xffffffffc036a000 [ 13.014738] __pci_register_driver+0x52/0x60 [ 13.014823] amdgpu_init+0x5d/0x1000 [amdgpu] [ 13.014828] do_one_initcall+0x46/0x16d [ 13.014831] ? __vunmap+0x7c/0xb0 [ 13.014835] ? vfree+0x29/0x70 [ 13.014838] ? kmem_cache_alloc+0xe2/0x130 [ 13.014843] do_init_module+0x56/0x1d0 [ 13.014847] load_module+0x201f/0x24e0 [ 13.014860] __do_sys_init_module+0x135/0x170 [ 13.014863] ? __do_sys_init_module+0x135/0x170 [ 13.014872] __x64_sys_init_module+0x15/0x20 [ 13.014874] do_syscall_64+0x48/0xf0 [ 13.014879] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 13.014881] RIP: 0033:0x7f32f9823a0a [ 13.014883] RSP: 002b:00007ffe34f4aef8 EFLAGS: 00000246 ORIG_RAX: 00000000000000af [ 13.014886] RAX: ffffffffffffffda RBX: 00005591f15d6410 RCX: 00007f32f9823a0a [ 13.014888] RDX: 00005591f15b2b40 RSI: 0000000007773446 RDI: 00007f32eae05010 [ 13.014890] RBP: 00005591f15b2b40 R08: 0000000000000007 R09: 0000000000000006 [ 13.014891] R10: 00005591f15ab010 R11: 0000000000000246 R12: 00007f32eae05010 [ 13.014893] R13: 00005591f15dd170 R14: 0000000000020000 R15: 0000000000000000 [ 13.014899] Code: 89 da 48 8b 07 48 8b 40 08 e8 66 e3 76 fc 89 d8 48 8b 74 24 18 65 48 33 34 25 28 00 00 00 75 20 48 83 c4 50 5b 41 5c 41 5d 5d c3 <0f> 0b e9 19 ff ff ff 44 89 e0 4d 89 cd 41 bc 01 00 00 00 eb 99 [ 13.014954] ---[ end trace 1de410066a9a019d ]--- [ 13.019389] Console: switching to colour frame buffer device 240x67 [ 13.035169] amdgpu 0000:00:01.0: fb0: amdgpudrmfb frame buffer device [ 13.048074] device: 'hwmon1': device_add [ 13.048131] PM: Adding info for No Bus:hwmon1 [ 13.053257] [drm] Initialized amdgpu 3.25.0 20150101 for 0000:00:01.0 on minor 0 [ 13.053263] driver: 'amdgpu': driver_bound: bound to device '0000:00:01.0' [ 13.053307] bus: 'pci': really_probe: bound device 0000:00:01.0 to driver amdgpu [ 13.087179] switching from power state: [ 13.087186] ui class: performance [ 13.087187] internal class: none [ 13.087192] caps: [ 13.087196] uvd vclk: 0 dclk: 0 [ 13.087200] power level 0 sclk: 40000 vddc: 3150 [ 13.087202] power level 1 sclk: 40000 vddc: 3200 [ 13.087205] power level 2 sclk: 40000 vddc: 3600 [ 13.087206] status: c [ 13.087210] switching to power state: [ 13.087211] ui class: performance [ 13.087212] internal class: none [ 13.087216] caps: [ 13.087219] uvd vclk: 0 dclk: 0 [ 13.087222] power level 0 sclk: 20000 vddc: 3150 [ 13.087224] power level 1 sclk: 30000 vddc: 3200 [ 13.087226] power level 2 sclk: 40000 vddc: 3600 [ 13.087227] status: r [ 13.311604] kauditd_printk_skb: 2 callbacks suppressed [ 13.311610] audit: type=1130 audit(1528916213.649:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 13.361387] audit: type=1130 audit(1528916213.699:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 13.379928] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 13.661587] audit: type=1130 audit(1528916213.999:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 13.661606] audit: type=1131 audit(1528916213.999:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 13.890399] audit: type=1130 audit(1528916214.228:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 13.916599] audit: type=1131 audit(1528916214.254:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 13.919080] audit: type=1130 audit(1528916214.256:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 13.919116] audit: type=1131 audit(1528916214.257:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 13.922526] audit: type=1130 audit(1528916214.260:21): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 13.922562] audit: type=1131 audit(1528916214.260:22): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 14.245696] systemd-journald[175]: Received SIGTERM from PID 1 (systemd). [ 14.308584] systemd: 14 output lines suppressed due to ratelimiting [ 14.434802] SELinux: 32768 avtab hash slots, 114475 rules. [ 14.482316] SELinux: 32768 avtab hash slots, 114475 rules. [ 14.977074] SELinux: 8 users, 14 roles, 5117 types, 319 bools, 1 sens, 1024 cats [ 14.977084] SELinux: 129 classes, 114475 rules [ 14.988331] SELinux: Permission name_connect in class sctp_socket not defined in policy. [ 14.988337] SELinux: Permission association in class sctp_socket not defined in policy. [ 14.988480] SELinux: Class bpf not defined in policy. [ 14.988481] SELinux: the above unknown classes and permissions will be allowed [ 14.988501] SELinux: policy capability network_peer_controls=1 [ 14.988502] SELinux: policy capability open_perms=1 [ 14.988504] SELinux: policy capability extended_socket_class=1 [ 14.988506] SELinux: policy capability always_check_network=0 [ 14.988508] SELinux: policy capability cgroup_seclabel=1 [ 14.988509] SELinux: policy capability nnp_nosuid_transition=1 [ 14.988512] SELinux: Completing initialization. [ 14.988513] SELinux: Setting up existing superblocks. [ 15.018169] systemd[1]: Successfully loaded SELinux policy in 624.642ms. [ 15.160203] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 104.335ms. [ 15.166207] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 15.178496] systemd[1]: Detected architecture x86-64. [ 15.181897] systemd[1]: Set hostname to . [ 15.526207] systemd[1]: Stopped Switch Root. [ 15.527111] systemd[1]: systemd-journald.service: Service has no hold-off time, scheduling restart. [ 15.527384] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. [ 15.527442] systemd[1]: Stopped Journal Service. [ 15.531111] systemd[1]: Starting Journal Service... [ 15.532560] systemd[1]: Created slice system-getty.slice. [ 15.537401] systemd[1]: Listening on udev Control Socket. [ 15.634043] EXT4-fs (sda5): re-mounted. Opts: (null) [ 15.682859] systemd-journald[435]: Received request to flush runtime journal from PID 1 [ 16.157215] acpi_cpufreq: overriding BIOS provided _PSD data [ 16.471401] device class 'rfkill': registering [ 16.471433] device: 'rfkill': device_add [ 16.471470] PM: Adding info for No Bus:rfkill [ 16.545355] bus: 'pci': add driver piix4_smbus [ 16.545390] bus: 'pci': driver_probe_device: matched device 0000:00:14.0 with driver piix4_smbus [ 16.545398] bus: 'pci': really_probe: probing driver piix4_smbus with device 0000:00:14.0 [ 16.545411] piix4_smbus 0000:00:14.0: no default pinctrl state [ 16.545429] devices_kset: Moving 0000:00:14.0 to end of list [ 16.545465] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 16.545471] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection [ 16.545487] device: 'i2c-2': device_add [ 16.545509] bus: 'i2c': add device i2c-2 [ 16.545534] PM: Adding info for i2c:i2c-2 [ 16.545588] device: 'i2c-3': device_add [ 16.545603] bus: 'i2c': add device i2c-3 [ 16.545628] PM: Adding info for i2c:i2c-3 [ 16.545668] device: 'i2c-4': device_add [ 16.545682] bus: 'i2c': add device i2c-4 [ 16.545699] PM: Adding info for i2c:i2c-4 [ 16.545737] device: 'i2c-5': device_add [ 16.545751] bus: 'i2c': add device i2c-5 [ 16.545767] PM: Adding info for i2c:i2c-5 [ 16.545818] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 16.545827] device: 'i2c-6': device_add [ 16.545848] bus: 'i2c': add device i2c-6 [ 16.545871] PM: Adding info for i2c:i2c-6 [ 16.545908] driver: 'piix4_smbus': driver_bound: bound to device '0000:00:14.0' [ 16.554064] bus: 'pci': really_probe: bound device 0000:00:14.0 to driver piix4_smbus [ 16.615306] bus: 'pci': add driver k10temp [ 16.615347] bus: 'pci': driver_probe_device: matched device 0000:00:18.3 with driver k10temp [ 16.615355] bus: 'pci': really_probe: probing driver k10temp with device 0000:00:18.3 [ 16.615369] k10temp 0000:00:18.3: no default pinctrl state [ 16.617102] devices_kset: Moving 0000:00:18.3 to end of list [ 16.617132] device: 'hwmon2': device_add [ 16.617245] PM: Adding info for No Bus:hwmon2 [ 16.617286] driver: 'k10temp': driver_bound: bound to device '0000:00:18.3' [ 16.617333] bus: 'pci': really_probe: bound device 0000:00:18.3 to driver k10temp [ 16.636188] Adding 2097148k swap on /dev/sda3. Priority:-2 extents:1 across:2097148k SSFS [ 16.733507] bus: 'pci': add driver fam15h_power [ 16.733545] bus: 'pci': driver_probe_device: matched device 0000:00:18.4 with driver fam15h_power [ 16.733553] bus: 'pci': really_probe: probing driver fam15h_power with device 0000:00:18.4 [ 16.733565] fam15h_power 0000:00:18.4: no default pinctrl state [ 16.733582] devices_kset: Moving 0000:00:18.4 to end of list [ 16.733610] device: 'hwmon3': device_add [ 16.733647] PM: Adding info for No Bus:hwmon3 [ 16.733669] driver: 'fam15h_power': driver_bound: bound to device '0000:00:18.4' [ 16.736083] bus: 'pci': really_probe: bound device 0000:00:18.4 to driver fam15h_power [ 16.771250] EFI Variables Facility v0.08 2004-May-17 [ 16.896914] media: Linux media interface: v0.10 [ 16.896951] bus: 'media': registered [ 17.204769] cryptd: max_cpu_qlen set to 1000 [ 17.440344] Linux video capture interface: v2.00 [ 17.440354] device class 'video4linux': registering [ 17.556413] AVX version of gcm_enc/dec engaged. [ 17.556418] AES CTR mode by8 optimization enabled [ 17.755084] alg: No test for pcbc(aes) (pcbc-aes-aesni) [ 18.098256] MCE: In-kernel MCE decoding enabled. [ 18.202439] EDAC amd64: Node 0: DRAM ECC disabled. [ 18.202496] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 18.220616] EDAC amd64: Node 0: DRAM ECC disabled. [ 18.220623] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 18.237333] uvcvideo: Unable to create debugfs directory [ 18.237344] bus: 'usb': add driver uvcvideo [ 18.237398] bus: 'usb': driver_probe_device: matched device 2-3:1.0 with driver uvcvideo [ 18.237406] bus: 'usb': really_probe: probing driver uvcvideo with device 2-3:1.0 [ 18.237421] uvcvideo 2-3:1.0: no default pinctrl state [ 18.237436] devices_kset: Moving 2-3:1.0 to end of list [ 18.240072] driver: 'uvcvideo': driver_bound: bound to device '2-3:1.1' [ 18.240155] uvcvideo: Found UVC 1.00 device WebCam SC-10HDD13335N (2232:1054) [ 18.256256] device: 'video0': device_add [ 18.256333] PM: Adding info for No Bus:video0 [ 18.256790] device: 'video1': device_add [ 18.256823] PM: Adding info for No Bus:video1 [ 18.256923] uvcvideo 2-3:1.0: Entity type for entity Extension 4 was not initialized! [ 18.256930] uvcvideo 2-3:1.0: Entity type for entity Processing 2 was not initialized! [ 18.256936] uvcvideo 2-3:1.0: Entity type for entity Camera 1 was not initialized! [ 18.256950] device: 'media0': device_add [ 18.256961] bus: 'media': add device media0 [ 18.256984] PM: Adding info for media:media0 [ 18.257115] device: 'input15': device_add [ 18.257187] PM: Adding info for No Bus:input15 [ 18.257237] input: WebCam SC-10HDD13335N: WebCam S as /devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3:1.0/input/input15 [ 18.257257] device: 'event10': device_add [ 18.257281] PM: Adding info for No Bus:event10 [ 18.257444] driver: 'uvcvideo': driver_bound: bound to device '2-3:1.0' [ 18.257497] bus: 'usb': really_probe: bound device 2-3:1.0 to driver uvcvideo [ 18.257573] usbcore: registered new interface driver uvcvideo [ 18.257576] USB Video Class driver (1.1.1) [ 18.363243] Bluetooth: Core ver 2.22 [ 18.363251] device class 'bluetooth': registering [ 18.363287] NET: Registered protocol family 31 [ 18.363290] Bluetooth: HCI device and connection manager initialized [ 18.363302] Bluetooth: HCI socket layer initialized [ 18.363309] Bluetooth: L2CAP socket layer initialized [ 18.363314] Bluetooth: SCO socket layer initialized [ 18.374027] device class 'ieee80211': registering [ 18.374184] Registering platform device 'regulatory.0'. Parent at platform [ 18.374189] device: 'regulatory.0': device_add [ 18.374203] bus: 'platform': add device regulatory.0 [ 18.374234] PM: Adding info for platform:regulatory.0 [ 18.374290] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 18.525854] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 18.528317] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 18.528323] cfg80211: failed to load regulatory.db [ 18.605002] bus: 'usb': add driver btusb [ 18.605093] bus: 'usb': driver_probe_device: matched device 4-2:1.0 with driver btusb [ 18.605102] bus: 'usb': really_probe: probing driver btusb with device 4-2:1.0 [ 18.605116] btusb 4-2:1.0: no default pinctrl state [ 18.605132] devices_kset: Moving 4-2:1.0 to end of list [ 18.605158] btusb: probe of 4-2:1.0 rejects match -19 [ 18.605164] bus: 'usb': driver_probe_device: matched device 4-2:1.1 with driver btusb [ 18.605168] bus: 'usb': really_probe: probing driver btusb with device 4-2:1.1 [ 18.605174] btusb 4-2:1.1: no default pinctrl state [ 18.605184] devices_kset: Moving 4-2:1.1 to end of list [ 18.605196] btusb: probe of 4-2:1.1 rejects match -19 [ 18.605247] usbcore: registered new interface driver btusb [ 18.664267] bus: 'usb': add driver ath3k [ 18.664315] bus: 'usb': driver_probe_device: matched device 4-2:1.0 with driver ath3k [ 18.664324] bus: 'usb': really_probe: probing driver ath3k with device 4-2:1.0 [ 18.664338] ath3k 4-2:1.0: no default pinctrl state [ 18.664360] devices_kset: Moving 4-2:1.0 to end of list [ 18.742388] usb 4-2: USB disconnect, device number 2 [ 18.743260] driver: 'ath3k': driver_bound: bound to device '4-2:1.0' [ 18.743359] bus: 'usb': really_probe: bound device 4-2:1.0 to driver ath3k [ 18.743374] bus: 'usb': driver_probe_device: matched device 4-2:1.1 with driver ath3k [ 18.743379] bus: 'usb': really_probe: probing driver ath3k with device 4-2:1.1 [ 18.743387] ath3k 4-2:1.1: no default pinctrl state [ 18.743410] devices_kset: Moving 4-2:1.1 to end of list [ 18.743427] ath3k: probe of 4-2:1.1 rejects match -19 [ 18.743435] device: 'ep_81': device_unregister [ 18.743489] PM: Removing info for No Bus:ep_81 [ 18.743497] usbcore: registered new interface driver ath3k [ 18.743507] device: 'ep_82': device_unregister [ 18.743552] PM: Removing info for No Bus:ep_82 [ 18.743560] device: 'ep_02': device_unregister [ 18.743585] PM: Removing info for No Bus:ep_02 [ 18.743636] bus: 'usb': remove device 4-2:1.0 [ 18.743681] PM: Removing info for usb:4-2:1.0 [ 18.743706] device: 'ep_83': device_unregister [ 18.743736] PM: Removing info for No Bus:ep_83 [ 18.743742] device: 'ep_03': device_unregister [ 18.743767] PM: Removing info for No Bus:ep_03 [ 18.743802] bus: 'usb': remove device 4-2:1.1 [ 18.743805] PM: Removing info for usb:4-2:1.1 [ 18.745060] device: 'ep_00': device_unregister [ 18.745105] PM: Removing info for No Bus:ep_00 [ 18.745382] bus: 'usb': remove device 4-2 [ 18.745445] PM: Removing info for usb:4-2 [ 19.215086] usb 4-2: new full-speed USB device number 3 using ohci-pci [ 19.371260] usb 4-2: New USB device found, idVendor=0cf3, idProduct=3004, bcdDevice= 0.02 [ 19.371265] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 19.371271] device: '4-2': device_add [ 19.371330] bus: 'usb': add device 4-2 [ 19.371349] PM: Adding info for usb:4-2 [ 19.371647] bus: 'usb': driver_probe_device: matched device 4-2 with driver usb [ 19.371653] bus: 'usb': really_probe: probing driver usb with device 4-2 [ 19.371662] usb 4-2: no default pinctrl state [ 19.371677] devices_kset: Moving 4-2 to end of list [ 19.375100] device: '4-2:1.0': device_add [ 19.375136] bus: 'usb': add device 4-2:1.0 [ 19.375147] PM: Adding info for usb:4-2:1.0 [ 19.375202] bus: 'usb': driver_probe_device: matched device 4-2:1.0 with driver btusb [ 19.375207] bus: 'usb': really_probe: probing driver btusb with device 4-2:1.0 [ 19.375215] btusb 4-2:1.0: no default pinctrl state [ 19.375227] devices_kset: Moving 4-2:1.0 to end of list [ 19.375561] device: 'hci0': device_add [ 19.375589] PM: Adding info for No Bus:hci0 [ 19.375618] device: 'rfkill0': device_add [ 19.375651] PM: Adding info for No Bus:rfkill0 [ 19.375695] driver: 'btusb': driver_bound: bound to device '4-2:1.0' [ 19.375722] bus: 'usb': really_probe: bound device 4-2:1.0 to driver btusb [ 19.375735] device: 'ep_81': device_add [ 19.375762] PM: Adding info for No Bus:ep_81 [ 19.375768] device: 'ep_82': device_add [ 19.375794] PM: Adding info for No Bus:ep_82 [ 19.375800] device: 'ep_02': device_add [ 19.375822] PM: Adding info for No Bus:ep_02 [ 19.375825] device: '4-2:1.1': device_add [ 19.375849] bus: 'usb': add device 4-2:1.1 [ 19.375858] PM: Adding info for usb:4-2:1.1 [ 19.375885] driver: 'btusb': driver_bound: bound to device '4-2:1.1' [ 19.375910] device: 'ep_83': device_add [ 19.375937] PM: Adding info for No Bus:ep_83 [ 19.375943] device: 'ep_03': device_add [ 19.375966] PM: Adding info for No Bus:ep_03 [ 19.375972] driver: 'usb': driver_bound: bound to device '4-2' [ 19.375995] bus: 'usb': really_probe: bound device 4-2 to driver usb [ 19.379899] device: 'ep_00': device_add [ 19.379943] PM: Adding info for No Bus:ep_00 [ 19.412142] kauditd_printk_skb: 41 callbacks suppressed [ 19.412150] audit: type=1130 audit(1528916219.750:64): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 21.534539] bus: 'pci': add driver ath9k [ 21.534591] bus: 'pci': driver_probe_device: matched device 0000:02:00.0 with driver ath9k [ 21.534613] bus: 'pci': really_probe: probing driver ath9k with device 0000:02:00.0 [ 21.534625] ath9k 0000:02:00.0: no default pinctrl state [ 21.534639] devices_kset: Moving 0000:02:00.0 to end of list [ 21.534660] ath9k 0000:02:00.0: enabling device (0000 -> 0002) [ 21.534990] ath: phy0: WB335 2-ANT card detected [ 21.534994] ath: phy0: Set BT/WLAN RX diversity capability [ 21.542450] ath: phy0: Enable LNA combining [ 21.543596] ath: phy0: ASPM enabled: 0x42 [ 21.543601] ath: EEPROM regdomain: 0x6a [ 21.543603] ath: EEPROM indicates we should expect a direct regpair map [ 21.543608] ath: Country alpha2 being used: 00 [ 21.543610] ath: Regpair used: 0x6a [ 21.545224] device: 'phy0': device_add [ 21.545284] PM: Adding info for No Bus:phy0 [ 21.545414] device: 'rfkill1': device_add [ 21.545445] PM: Adding info for No Bus:rfkill1 [ 21.594590] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 21.594656] device: 'wlan0': device_add [ 21.594782] PM: Adding info for No Bus:wlan0 [ 21.595621] device: 'ath9k-phy0': device_add [ 21.595659] PM: Adding info for No Bus:ath9k-phy0 [ 21.595719] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffa6ed01a00000, irq=39 [ 21.595726] driver: 'ath9k': driver_bound: bound to device '0000:02:00.0' [ 21.595754] bus: 'pci': really_probe: bound device 0000:02:00.0 to driver ath9k [ 21.617267] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0 [ 21.617277] net wlan0: renaming to wlp2s0 [ 21.619854] audit: type=1400 audit(1528916221.957:65): avc: denied { create } for pid=435 comm="systemd-journal" scontext=system_u:system_r:syslogd_t:s0 tcontext=system_u:system_r:syslogd_t:s0 tclass=netlink_generic_socket permissive=0 [ 21.619869] audit: type=1300 audit(1528916221.957:65): arch=c000003e syscall=41 success=no exit=-13 a0=10 a1=80003 a2=10 a3=7f4330b31e40 items=0 ppid=1 pid=435 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="systemd-journal" exe="/usr/lib/systemd/systemd-journald" subj=system_u:system_r:syslogd_t:s0 key=(null) [ 21.619878] audit: type=1327 audit(1528916221.957:65): proctitle="/usr/lib/systemd/systemd-journald" [ 21.686259] audit: type=1130 audit(1528916222.024:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 21.774703] audit: type=1130 audit(1528916222.112:67): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-09beb78d\x2dcf12\x2d4b9b\x2dabc2\x2d940d09adb1d0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 21.790151] audit: type=1130 audit(1528916222.128:68): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-D4CB\x2dF2A5 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 21.795044] audit: type=1130 audit(1528916222.132:69): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-9fb107fb\x2ddc20\x2d4545\x2d8d01\x2d68c505d99b28 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 21.799755] audit: type=1130 audit(1528916222.137:70): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-2d3b57b4\x2d763a\x2d4daa\x2daedd\x2d8315c26ac77d comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 21.804931] EXT4-fs (sda4): mounting ext2 file system using the ext4 subsystem [ 21.812481] EXT4-fs (sda4): mounted filesystem without journal. Opts: (null) [ 21.824806] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 21.828445] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null) [ 21.845139] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 22.137882] audit: type=1130 audit(1528916222.475:71): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 22.563846] device: 'lo': device_add [ 22.564063] PM: Adding info for No Bus:lo [ 22.772666] device: 'lo': device_add [ 22.772802] PM: Adding info for No Bus:lo [ 22.995312] random: crng init done [ 22.995321] random: 7 urandom warning(s) missed due to ratelimiting [ 23.216136] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.216142] Bluetooth: BNEP filters: protocol multicast [ 23.216154] Bluetooth: BNEP socket layer initialized [ 23.257472] device: 'lo': device_add [ 23.257606] PM: Adding info for No Bus:lo [ 23.721050] RPC: Registered named UNIX socket transport module. [ 23.721057] RPC: Registered udp transport module. [ 23.721059] RPC: Registered tcp transport module. [ 23.721062] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 23.920524] device: 'vcs2': device_add [ 23.920570] PM: Adding info for No Bus:vcs2 [ 23.924601] device: 'vcsa2': device_add [ 23.924652] PM: Adding info for No Bus:vcsa2 [ 23.926952] device: 'vcs3': device_add [ 23.927037] PM: Adding info for No Bus:vcs3 [ 23.927202] device: 'vcsa3': device_add [ 23.927225] PM: Adding info for No Bus:vcsa3 [ 23.929645] device: 'vcs4': device_add [ 23.929695] PM: Adding info for No Bus:vcs4 [ 23.929848] device: 'vcsa4': device_add [ 23.929876] PM: Adding info for No Bus:vcsa4 [ 23.930122] device: 'vcs5': device_add [ 23.930146] PM: Adding info for No Bus:vcs5 [ 23.930240] device: 'vcsa5': device_add [ 23.930270] PM: Adding info for No Bus:vcsa5 [ 23.930471] device: 'vcs6': device_add [ 23.930494] PM: Adding info for No Bus:vcs6 [ 23.930585] device: 'vcsa6': device_add [ 23.930612] PM: Adding info for No Bus:vcsa6 [ 26.323507] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 26.408792] r8169 0000:01:00.0 enp1s0: link down [ 26.409046] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 26.439130] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 26.456111] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 26.485325] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 26.780309] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 27.822245] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 28.858635] wlp2s0: authenticate with 68:a3:78:7d:d5:e1 [ 28.871430] wlp2s0: send auth to 68:a3:78:7d:d5:e1 (try 1/3) [ 28.874329] wlp2s0: authenticated [ 28.876956] wlp2s0: associate with 68:a3:78:7d:d5:e1 (try 1/3) [ 28.881650] wlp2s0: RX AssocResp from 68:a3:78:7d:d5:e1 (capab=0x411 status=0 aid=1) [ 28.881819] wlp2s0: associated [ 29.009140] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 29.435640] PM: Removing info for No Bus:lo [ 30.021563] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:Unknown-1] [ 30.021589] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:Unknown-1] disconnected [ 30.021638] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:45:HDMI-A-1] [ 30.021696] [drm:drm_add_edid_modes [drm]] ELD monitor PLB2712HDS [ 30.021739] [drm:drm_add_edid_modes [drm]] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 [ 30.021776] [drm:drm_add_edid_modes [drm]] ELD size 36, SAD count 1 [ 30.021816] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 30.021855] [drm:drm_add_display_info [drm]] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 30.023647] [drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"1920x1080i" 50 74250 1920 1936 1980 2640 1080 1084 1094 1125 0x40 0x15 [ 30.023679] [drm:drm_mode_prune_invalid [drm]] Not using 1920x1080i mode: NO_INTERLACE [ 30.023718] [drm:drm_mode_debug_printmodeline [drm]] Modeline 109:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 30.023749] [drm:drm_mode_prune_invalid [drm]] Not using 1920x1080i mode: NO_INTERLACE [ 30.023786] [drm:drm_mode_debug_printmodeline [drm]] Modeline 113:"720x576i" 0 13500 720 732 795 864 576 580 586 625 0x40 0x101a [ 30.023924] [drm:drm_mode_prune_invalid [drm]] Not using 720x576i mode: NO_INTERLACE [ 30.023991] [drm:drm_mode_debug_printmodeline [drm]] Modeline 116:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 30.024023] [drm:drm_mode_prune_invalid [drm]] Not using 1920x1080i mode: NO_INTERLACE [ 30.024065] [drm:drm_mode_debug_printmodeline [drm]] Modeline 120:"720x480i" 0 13500 720 739 801 858 480 488 494 525 0x40 0x101a [ 30.024097] [drm:drm_mode_prune_invalid [drm]] Not using 720x480i mode: NO_INTERLACE [ 30.024134] [drm:drm_mode_debug_printmodeline [drm]] Modeline 127:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 30.024165] [drm:drm_mode_prune_invalid [drm]] Not using 1920x1080i mode: NO_INTERLACE [ 30.024202] [drm:drm_mode_debug_printmodeline [drm]] Modeline 131:"720x480i" 60 13514 720 739 801 858 480 488 494 525 0x40 0x101a [ 30.024234] [drm:drm_mode_prune_invalid [drm]] Not using 720x480i mode: NO_INTERLACE [ 30.024267] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:45:HDMI-A-1] probed modes : [ 30.024304] [drm:drm_mode_debug_printmodeline [drm]] Modeline 47:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 30.024340] [drm:drm_mode_debug_printmodeline [drm]] Modeline 89:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 30.024376] [drm:drm_mode_debug_printmodeline [drm]] Modeline 48:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 30.024417] [drm:drm_mode_debug_printmodeline [drm]] Modeline 54:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 30.024453] [drm:drm_mode_debug_printmodeline [drm]] Modeline 53:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 30.024489] [drm:drm_mode_debug_printmodeline [drm]] Modeline 66:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 30.024525] [drm:drm_mode_debug_printmodeline [drm]] Modeline 56:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 30.024561] [drm:drm_mode_debug_printmodeline [drm]] Modeline 57:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6 [ 30.024601] [drm:drm_mode_debug_printmodeline [drm]] Modeline 55:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 30.024637] [drm:drm_mode_debug_printmodeline [drm]] Modeline 100:"1280x800" 60 148500 1280 2008 2052 2200 800 1084 1089 1125 0x40 0x5 [ 30.024673] [drm:drm_mode_debug_printmodeline [drm]] Modeline 58:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 30.024709] [drm:drm_mode_debug_printmodeline [drm]] Modeline 83:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 30.024745] [drm:drm_mode_debug_printmodeline [drm]] Modeline 94:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 30.024785] [drm:drm_mode_debug_printmodeline [drm]] Modeline 50:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 30.024821] [drm:drm_mode_debug_printmodeline [drm]] Modeline 67:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 30.024857] [drm:drm_mode_debug_printmodeline [drm]] Modeline 68:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 30.024893] [drm:drm_mode_debug_printmodeline [drm]] Modeline 69:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 30.024947] [drm:drm_mode_debug_printmodeline [drm]] Modeline 70:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 30.024987] [drm:drm_mode_debug_printmodeline [drm]] Modeline 71:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 30.025023] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 30.025059] [drm:drm_mode_debug_printmodeline [drm]] Modeline 59:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 30.025094] [drm:drm_mode_debug_printmodeline [drm]] Modeline 60:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 30.025130] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 30.025171] [drm:drm_mode_debug_printmodeline [drm]] Modeline 95:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 30.025207] [drm:drm_mode_debug_printmodeline [drm]] Modeline 84:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 30.025243] [drm:drm_mode_debug_printmodeline [drm]] Modeline 61:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 30.025278] [drm:drm_mode_debug_printmodeline [drm]] Modeline 62:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 30.025315] [drm:drm_mode_debug_printmodeline [drm]] Modeline 63:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 30.025354] [drm:drm_mode_debug_printmodeline [drm]] Modeline 91:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 30.025390] [drm:drm_mode_debug_printmodeline [drm]] Modeline 64:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 30.025426] [drm:drm_mode_debug_printmodeline [drm]] Modeline 65:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 32.692756] device: 'lo': device_add [ 32.692903] PM: Adding info for No Bus:lo [ 35.536736] device: 'lo': device_add [ 35.536895] PM: Adding info for No Bus:lo [ 36.857190] [drm:drm_mode_addfb2 [drm]] [FB:75] [ 36.857260] [drm:drm_mode_setcrtc [drm]] [CRTC:39:crtc-0] [ 36.857992] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:45:HDMI-A-1] [ 36.869489] [drm:drm_mode_setcrtc [drm]] [CRTC:41:crtc-1] [ 36.961421] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 37.229812] [drm:drm_mode_addfb2 [drm]] [FB:75] [ 37.289783] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 37.327462] [drm:drm_mode_addfb2 [drm]] [FB:75] [ 37.346680] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 37.377373] [drm:drm_mode_addfb2 [drm]] [FB:75] [ 37.394977] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 37.443494] [drm:drm_mode_addfb2 [drm]] [FB:75] [ 37.488650] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 37.730393] [drm:drm_mode_addfb2 [drm]] [FB:75] [ 38.685032] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 39.765717] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 39.863509] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 39.876539] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 39.894694] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 39.915006] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 39.951664] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 39.976420] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 39.992838] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 40.011760] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 40.083124] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 40.113662] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 40.142967] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 40.161845] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 40.179718] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 40.197392] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 40.214565] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 40.246863] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 40.262907] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 40.280469] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 40.299758] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 41.239929] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 41.451742] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 41.777303] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 41.979698] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 42.083120] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 42.157130] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 42.328304] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 42.507422] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 42.582219] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 42.993900] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 43.195275] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 43.532633] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 43.572889] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 43.599605] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 44.319627] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 44.344908] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 44.359164] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 44.376926] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 44.393256] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 44.412827] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 44.429007] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 44.445775] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 44.459472] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 44.477643] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 44.493879] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 44.509785] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 44.523010] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 44.545436] [drm:drm_mode_addfb2 [drm]] [FB:74] [ 44.651670] Bluetooth: RFCOMM TTY layer initialized [ 44.651689] Bluetooth: RFCOMM socket layer initialized [ 44.651692] Bluetooth: RFCOMM ver 1.11 [ 46.258828] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:Unknown-1] [ 46.258851] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:Unknown-1] disconnected [ 46.258890] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:45:HDMI-A-1] [ 46.258939] [drm:drm_add_edid_modes [drm]] ELD monitor PLB2712HDS [ 46.258973] [drm:drm_add_edid_modes [drm]] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 [ 46.259003] [drm:drm_add_edid_modes [drm]] ELD size 36, SAD count 1 [ 46.259035] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 46.259066] [drm:drm_add_display_info [drm]] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 46.260690] [drm:drm_mode_debug_printmodeline [drm]] Modeline 79:"1920x1080i" 50 74250 1920 1936 1980 2640 1080 1084 1094 1125 0x40 0x15 [ 46.260720] [drm:drm_mode_prune_invalid [drm]] Not using 1920x1080i mode: NO_INTERLACE [ 46.260758] [drm:drm_mode_debug_printmodeline [drm]] Modeline 112:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 46.260787] [drm:drm_mode_prune_invalid [drm]] Not using 1920x1080i mode: NO_INTERLACE [ 46.260820] [drm:drm_mode_debug_printmodeline [drm]] Modeline 116:"720x576i" 0 13500 720 732 795 864 576 580 586 625 0x40 0x101a [ 46.260849] [drm:drm_mode_prune_invalid [drm]] Not using 720x576i mode: NO_INTERLACE [ 46.260882] [drm:drm_mode_debug_printmodeline [drm]] Modeline 119:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 46.260914] [drm:drm_mode_prune_invalid [drm]] Not using 1920x1080i mode: NO_INTERLACE [ 46.260947] [drm:drm_mode_debug_printmodeline [drm]] Modeline 123:"720x480i" 0 13500 720 739 801 858 480 488 494 525 0x40 0x101a [ 46.260975] [drm:drm_mode_prune_invalid [drm]] Not using 720x480i mode: NO_INTERLACE [ 46.261008] [drm:drm_mode_debug_printmodeline [drm]] Modeline 130:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 46.261041] [drm:drm_mode_prune_invalid [drm]] Not using 1920x1080i mode: NO_INTERLACE [ 46.261074] [drm:drm_mode_debug_printmodeline [drm]] Modeline 134:"720x480i" 60 13514 720 739 801 858 480 488 494 525 0x40 0x101a [ 46.261102] [drm:drm_mode_prune_invalid [drm]] Not using 720x480i mode: NO_INTERLACE [ 46.261130] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:45:HDMI-A-1] probed modes : [ 46.261166] [drm:drm_mode_debug_printmodeline [drm]] Modeline 47:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 46.261199] [drm:drm_mode_debug_printmodeline [drm]] Modeline 89:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 46.261231] [drm:drm_mode_debug_printmodeline [drm]] Modeline 48:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 46.261264] [drm:drm_mode_debug_printmodeline [drm]] Modeline 54:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 46.261300] [drm:drm_mode_debug_printmodeline [drm]] Modeline 53:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 46.261333] [drm:drm_mode_debug_printmodeline [drm]] Modeline 66:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 46.261365] [drm:drm_mode_debug_printmodeline [drm]] Modeline 56:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 46.261397] [drm:drm_mode_debug_printmodeline [drm]] Modeline 57:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6 [ 46.261430] [drm:drm_mode_debug_printmodeline [drm]] Modeline 55:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 46.261465] [drm:drm_mode_debug_printmodeline [drm]] Modeline 100:"1280x800" 60 148500 1280 2008 2052 2200 800 1084 1089 1125 0x40 0x5 [ 46.261549] [drm:drm_mode_debug_printmodeline [drm]] Modeline 58:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 46.261592] [drm:drm_mode_debug_printmodeline [drm]] Modeline 83:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 46.261624] [drm:drm_mode_debug_printmodeline [drm]] Modeline 94:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 46.261657] [drm:drm_mode_debug_printmodeline [drm]] Modeline 50:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 46.261693] [drm:drm_mode_debug_printmodeline [drm]] Modeline 67:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 46.261726] [drm:drm_mode_debug_printmodeline [drm]] Modeline 68:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 46.261758] [drm:drm_mode_debug_printmodeline [drm]] Modeline 69:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 46.261790] [drm:drm_mode_debug_printmodeline [drm]] Modeline 70:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 46.261823] [drm:drm_mode_debug_printmodeline [drm]] Modeline 71:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 46.261859] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 46.261891] [drm:drm_mode_debug_printmodeline [drm]] Modeline 59:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 46.261923] [drm:drm_mode_debug_printmodeline [drm]] Modeline 60:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 46.261955] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 46.261987] [drm:drm_mode_debug_printmodeline [drm]] Modeline 95:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 46.262023] [drm:drm_mode_debug_printmodeline [drm]] Modeline 84:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 46.262056] [drm:drm_mode_debug_printmodeline [drm]] Modeline 61:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 46.262088] [drm:drm_mode_debug_printmodeline [drm]] Modeline 62:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 46.262120] [drm:drm_mode_debug_printmodeline [drm]] Modeline 63:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 46.262153] [drm:drm_mode_debug_printmodeline [drm]] Modeline 91:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 46.262188] [drm:drm_mode_debug_printmodeline [drm]] Modeline 64:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 46.262221] [drm:drm_mode_debug_printmodeline [drm]] Modeline 65:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 46.503360] fuse init (API version 7.26) [ 46.503568] device: 'fuse': device_add [ 46.503596] PM: Adding info for No Bus:fuse [ 46.520615] device: '0:47': device_add [ 46.520700] PM: Adding info for No Bus:0:47 [ 51.756469] rfkill: input handler disabled [ 54.183539] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 54.183607] [drm:drm_mode_setcrtc [drm]] [CRTC:39:crtc-0] [ 54.183650] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:45:HDMI-A-1] [ 54.186124] [drm:drm_mode_setcrtc [drm]] [CRTC:41:crtc-1] [ 54.230316] [drm:drm_mode_addfb2 [drm]] [FB:77] [ 54.390646] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 54.643574] [drm:drm_mode_addfb2 [drm]] [FB:77]