[ 0.000000] Linux version 4.16.0-rc3+ (root@ubuntu) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #6 SMP Thu Jun 28 04:06:36 UTC 2018 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.16.0-rc3+ root=UUID=6cfc579f-8cda-4fc2-be8f-f3ad4764e11d ro quiet splash intel_idle.max_cstate=1 tsc=reliable drm.debug=0x1e log_buf_len=1M libata.force=1:3.0G,2:3.0G i915.disable_power_well=0 vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable [ 0.000000] BIOS-e820: [mem 0x000000001f000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000007b4d6fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007b4d7000-0x000000007b550fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007b551000-0x000000007b678fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007b679000-0x000000007badafff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007badb000-0x000000007bd9dfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007bd9e000-0x000000007bdeffff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000007bdf0000-0x000000007bffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ESRT=0x7bd9a298 ACPI=0x7ba46000 ACPI 2.0=0x7ba46000 SMBIOS=0xf05e0 SMBIOS 3.0=0xf0600 MPS=0xfc9a0 [ 0.000000] random: fast init done [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. Default string/N3060TN-EM, BIOS F2 K8 08/16/2017 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07C000000 mask FFC000000 uncachable [ 0.000000] 2 base 090000000 mask FF0000000 write-through [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] found SMP MP-table at [mem 0x000fcb90-0x000fcb9f] mapped at [ (ptrval)] [ 0.000000] esrt: Reserving ESRT space from 0x000000007bd9a298 to 0x000000007bd9a2d0. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 96000 size 24576 [ 0.000000] BRK [0x296ad000, 0x296adfff] PGTABLE [ 0.000000] BRK [0x296ae000, 0x296aefff] PGTABLE [ 0.000000] BRK [0x296af000, 0x296affff] PGTABLE [ 0.000000] BRK [0x296b0000, 0x296b0fff] PGTABLE [ 0.000000] BRK [0x296b1000, 0x296b1fff] PGTABLE [ 0.000000] BRK [0x296b2000, 0x296b2fff] PGTABLE [ 0.000000] BRK [0x296b3000, 0x296b3fff] PGTABLE [ 0.000000] BRK [0x296b4000, 0x296b4fff] PGTABLE [ 0.000000] log_buf_len: 1048576 bytes [ 0.000000] early log buf free: 257592(98%) [ 0.000000] Secure boot could not be determined [ 0.000000] RAMDISK: [mem 0x31f02000-0x34f78fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000007BA46000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x000000007BA46080 000084 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x000000007BA527A8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20180105/tbfadt-603) [ 0.000000] ACPI: DSDT 0x000000007BA461A0 00C608 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x000000007BADAE80 000040 [ 0.000000] ACPI: APIC 0x000000007BA528B8 000068 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x000000007BA52920 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x000000007BA52968 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x000000007BA52A08 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x000000007BA52A48 000763 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x000000007BA531B0 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x000000007BA53440 00017A (v01 PmRef ApTst 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 0x000000007BA535C0 000042 (v01 ALASKA A M I 00000000 00000000) [ 0.000000] ACPI: LPIT 0x000000007BA53608 000104 (v01 ALASKA A M I 00000005 MSFT 0100000D) [ 0.000000] ACPI: BGRT 0x000000007BA53710 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: CSRT 0x000000007BA53748 00014C (v00 INTEL LANFORDC 00000005 MSFT 0100000D) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007bffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x7b222000-0x7b24cfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007bffffff] [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000003efff] [ 0.000000] node 0: [mem 0x0000000000040000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001effffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x000000007b4d6fff] [ 0.000000] node 0: [mem 0x000000007b551000-0x000000007b678fff] [ 0.000000] node 0: [mem 0x000000007bdf0000-0x000000007bffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007bffffff] [ 0.000000] On node 0 totalpages: 501165 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 27 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7872 pages used for memmap [ 0.000000] DMA32 zone: 497167 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] Reserving Intel graphics memory at [mem 0x7cf00000-0x7eefffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x1f000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b4d7000-0x7b550fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b679000-0x7badafff] [ 0.000000] PM: Registered nosave memory: [mem 0x7badb000-0x7bd9dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7bd9e000-0x7bdeffff] [ 0.000000] e820: [mem 0x7ef00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 45 pages/cpu @ (ptrval) s146648 r8192 d29480 u1048576 [ 0.000000] pcpu-alloc: s146648 r8192 d29480 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 493202 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.16.0-rc3+ root=UUID=6cfc579f-8cda-4fc2-be8f-f3ad4764e11d ro quiet splash intel_idle.max_cstate=1 tsc=reliable drm.debug=0x1e log_buf_len=1M libata.force=1:3.0G,2:3.0G i915.disable_power_well=0 vt.handoff=7 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 1841056K/2004660K available (12300K kernel code, 2456K rwdata, 4044K rodata, 2356K init, 2392K bss, 163604K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 38578 entries in 151 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 524544, nr_irqs: 512, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180105 [ 0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.024000] tsc: Detected 1600.000 MHz processor [ 0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=6400000) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.024000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.024000] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.024000] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.024000] CPU: Physical Processor ID: 0 [ 0.024000] CPU: Processor Core ID: 0 [ 0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.024000] mce: CPU supports 6 MCE banks [ 0.024000] CPU0: Thermal monitoring enabled (TM1) [ 0.024000] process: using mwait in idle threads [ 0.024000] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.024000] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0 [ 0.024000] Spectre V2 : Spectre mitigation: kernel not compiled with retpoline; no mitigation available! [ 0.024000] Freeing SMP alternatives memory: 36K [ 0.033772] TSC deadline timer enabled [ 0.033777] smpboot: CPU0: Intel(R) Celeron(R) CPU N3060 @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x4) [ 0.033983] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver. [ 0.034008] ... version: 3 [ 0.034009] ... bit width: 40 [ 0.034010] ... generic registers: 2 [ 0.034012] ... value mask: 000000ffffffffff [ 0.034013] ... max period: 0000007fffffffff [ 0.034015] ... fixed-purpose events: 3 [ 0.034016] ... event mask: 0000000700000003 [ 0.034102] Hierarchical SRCU implementation. [ 0.035655] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.035697] smp: Bringing up secondary CPUs ... [ 0.035969] x86: Booting SMP configuration: [ 0.035971] .... node #0, CPUs: #1 [ 0.036000] smp: Brought up 1 node, 2 CPUs [ 0.036000] smpboot: Max logical packages: 1 [ 0.036000] smpboot: Total of 2 processors activated (6400.00 BogoMIPS) [ 0.036000] devtmpfs: initialized [ 0.036000] x86/mm: Memory block size: 128MB [ 0.036280] evm: security.selinux [ 0.036282] evm: security.SMACK64 [ 0.036283] evm: security.SMACK64EXEC [ 0.036284] evm: security.SMACK64TRANSMUTE [ 0.036285] evm: security.SMACK64MMAP [ 0.036287] evm: security.apparmor [ 0.036288] evm: security.ima [ 0.036289] evm: security.capability [ 0.036357] PM: Registering ACPI NVS region [mem 0x0003f000-0x0003ffff] (4096 bytes) [ 0.036357] PM: Registering ACPI NVS region [mem 0x7b679000-0x7badafff] (4595712 bytes) [ 0.036438] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.036438] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.036438] pinctrl core: initialized pinctrl subsystem [ 0.036438] RTC time: 11:21:09, date: 06/29/18 [ 0.036604] NET: Registered protocol family 16 [ 0.036850] audit: initializing netlink subsys (disabled) [ 0.036901] audit: type=2000 audit(1530271269.036:1): state=initialized audit_enabled=0 res=1 [ 0.036901] cpuidle: using governor ladder [ 0.036901] cpuidle: using governor menu [ 0.036901] ACPI: bus type PCI registered [ 0.036901] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.036901] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.036901] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.036901] PCI: Using configuration type 1 for base access [ 0.041250] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.041250] ACPI: Added _OSI(Module Device) [ 0.041250] ACPI: Added _OSI(Processor Device) [ 0.041250] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.041250] ACPI: Added _OSI(Processor Aggregator Device) [ 0.053042] ACPI: Dynamic OEM Table Load: [ 0.053056] ACPI: SSDT 0xFFFF8BAE35256800 0006B8 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.053516] ACPI: Dynamic OEM Table Load: [ 0.053527] ACPI: SSDT 0xFFFF8BAE352ACC00 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.054416] ACPI: Dynamic OEM Table Load: [ 0.054426] ACPI: SSDT 0xFFFF8BAE352B1600 00015F (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.054833] ACPI: Dynamic OEM Table Load: [ 0.054841] ACPI: SSDT 0xFFFF8BAE352D79C0 00008D (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.056879] ACPI: Interpreter enabled [ 0.056926] ACPI: (supports S0 S3 S4 S5) [ 0.056929] ACPI: Using IOAPIC for interrupt routing [ 0.056995] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.057990] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.060827] ACPI: Power Resource [ID3C] (off) [ 0.066400] ACPI: Power Resource [USBC] (on) [ 0.070657] (null): Device [PWM1] is in always present list [ 0.075750] ACPI: Power Resource [CLK0] (off) [ 0.076402] ACPI: Power Resource [CLK0] (off) [ 0.076492] ACPI: Power Resource [CLK1] (off) [ 0.085285] (null): Device [GPED] is in always present list [ 0.087178] ACPI: Power Resource [FN00] (off) [ 0.088284] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.088294] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.088799] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.089673] PCI host bridge to bus 0000:00 [ 0.089679] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 0.089682] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 0.089685] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 0.089688] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.089691] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.089694] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.089697] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.089700] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window] [ 0.089704] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.089717] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000 [ 0.090015] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000 [ 0.090040] pci 0000:00:02.0: reg 0x10: [mem 0x80000000-0x80ffffff 64bit] [ 0.090053] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref] [ 0.090062] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.090090] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.090339] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601 [ 0.090404] pci 0000:00:13.0: reg 0x20: [io 0xf060-0xf07f] [ 0.090417] pci 0000:00:13.0: reg 0x24: [mem 0x81415000-0x814157ff] [ 0.090479] pci 0000:00:13.0: PME# supported from D3hot [ 0.090696] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330 [ 0.090729] pci 0000:00:14.0: reg 0x10: [mem 0x81400000-0x8140ffff 64bit] [ 0.090828] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.091078] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000 [ 0.091106] pci 0000:00:1a.0: reg 0x10: [mem 0x81100000-0x811fffff] [ 0.091117] pci 0000:00:1a.0: reg 0x14: [mem 0x81000000-0x810fffff] [ 0.091205] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.091456] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300 [ 0.091493] pci 0000:00:1b.0: reg 0x10: [mem 0x81410000-0x81413fff 64bit] [ 0.091595] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.091806] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400 [ 0.091922] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.092150] pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400 [ 0.092267] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.092496] pci 0000:00:1c.3: [8086:22ce] type 01 class 0x060400 [ 0.092611] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.092849] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100 [ 0.093187] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500 [ 0.093258] pci 0000:00:1f.3: reg 0x10: [mem 0x81414000-0x8141401f] [ 0.093373] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.093819] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.093960] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.094005] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.094046] pci 0000:02:00.0: reg 0x18: [mem 0x81304000-0x81304fff 64bit] [ 0.094071] pci 0000:02:00.0: reg 0x20: [mem 0x81300000-0x81303fff 64bit] [ 0.094218] pci 0000:02:00.0: supports D1 D2 [ 0.094221] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.104055] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.104061] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.104067] pci 0000:00:1c.1: bridge window [mem 0x81300000-0x813fffff] [ 0.104195] pci 0000:03:00.0: [1b21:1182] type 01 class 0x060400 [ 0.104275] pci 0000:03:00.0: enabling Extended Tags [ 0.104364] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.116029] pci 0000:00:1c.3: PCI bridge to [bus 03-05] [ 0.116039] pci 0000:00:1c.3: bridge window [mem 0x81200000-0x812fffff] [ 0.116154] pci 0000:04:07.0: [1b21:1182] type 01 class 0x060400 [ 0.116235] pci 0000:04:07.0: enabling Extended Tags [ 0.116335] pci 0000:04:07.0: PME# supported from D0 D3hot D3cold [ 0.116473] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.116487] pci 0000:03:00.0: bridge window [mem 0x81200000-0x812fffff] [ 0.116606] pci 0000:05:00.0: [168c:0034] type 00 class 0x028000 [ 0.116673] pci 0000:05:00.0: reg 0x10: [mem 0x81200000-0x8127ffff 64bit] [ 0.116750] pci 0000:05:00.0: reg 0x30: [mem 0x81280000-0x8128ffff pref] [ 0.116901] pci 0000:05:00.0: supports D1 [ 0.116904] pci 0000:05:00.0: PME# supported from D0 D1 D3hot [ 0.128040] pci 0000:04:07.0: PCI bridge to [bus 05] [ 0.128055] pci 0000:04:07.0: bridge window [mem 0x81200000-0x812fffff] [ 0.130580] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.130727] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.130872] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.131016] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.131161] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.131307] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.131452] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.131595] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.132568] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.132568] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.132568] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.132568] vgaarb: loaded [ 0.132568] SCSI subsystem initialized [ 0.132568] libata version 3.00 loaded. [ 0.132568] ACPI: bus type USB registered [ 0.132568] usbcore: registered new interface driver usbfs [ 0.132568] usbcore: registered new interface driver hub [ 0.132568] usbcore: registered new device driver usb [ 0.132568] pps_core: LinuxPPS API ver. 1 registered [ 0.132568] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.132568] PTP clock support registered [ 0.132568] EDAC MC: Ver: 3.0.0 [ 0.132568] Registered efivars operations [ 0.138287] PCI: Using ACPI for IRQ routing [ 0.149258] PCI: pci_cache_line_size set to 64 bytes [ 0.149334] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff] [ 0.149337] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff] [ 0.149339] e820: reserve RAM buffer [mem 0x7b4d7000-0x7bffffff] [ 0.149341] e820: reserve RAM buffer [mem 0x7b679000-0x7bffffff] [ 0.149555] NetLabel: Initializing [ 0.149557] NetLabel: domain hash size = 128 [ 0.149558] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.149589] NetLabel: unlabeled traffic allowed by default [ 0.149632] clocksource: Switched to clocksource tsc-early [ 0.174984] VFS: Disk quotas dquot_6.6.0 [ 0.175022] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.175247] AppArmor: AppArmor Filesystem Enabled [ 0.175309] pnp: PnP ACPI init [ 0.175433] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.175728] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.175733] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.175736] system 00:01: [io 0x0500-0x05fe] has been reserved [ 0.175746] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.176074] system 00:02: [io 0x0a00-0x0a2f] has been reserved [ 0.176078] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.176081] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.176091] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.176666] pnp 00:03: [dma 0 disabled] [ 0.176765] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.179183] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.179282] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.179286] system 00:05: [mem 0xfea00000-0xfeafffff] has been reserved [ 0.179289] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved [ 0.179292] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved [ 0.179296] system 00:05: [mem 0xfed06000-0xfed06fff] has been reserved [ 0.179299] system 00:05: [mem 0xfed08000-0xfed09fff] has been reserved [ 0.179302] system 00:05: [mem 0xfed80000-0xfedbffff] has been reserved [ 0.179305] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 0.179309] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.179319] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.179910] pnp: PnP ACPI: found 6 devices [ 0.188383] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.188412] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.188418] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.188422] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 0.188479] pci 0000:00:1c.0: BAR 14: assigned [mem 0x81500000-0x816fffff] [ 0.188490] pci 0000:00:1c.0: BAR 15: assigned [mem 0x81700000-0x818fffff 64bit pref] [ 0.188496] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.188502] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.188506] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.188514] pci 0000:00:1c.0: bridge window [mem 0x81500000-0x816fffff] [ 0.188520] pci 0000:00:1c.0: bridge window [mem 0x81700000-0x818fffff 64bit pref] [ 0.188529] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.188533] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.188540] pci 0000:00:1c.1: bridge window [mem 0x81300000-0x813fffff] [ 0.188552] pci 0000:04:07.0: PCI bridge to [bus 05] [ 0.188560] pci 0000:04:07.0: bridge window [mem 0x81200000-0x812fffff] [ 0.188573] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.188581] pci 0000:03:00.0: bridge window [mem 0x81200000-0x812fffff] [ 0.188593] pci 0000:00:1c.3: PCI bridge to [bus 03-05] [ 0.188600] pci 0000:00:1c.3: bridge window [mem 0x81200000-0x812fffff] [ 0.188612] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 0.188615] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 0.188618] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 0.188621] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.188624] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.188626] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.188629] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] [ 0.188632] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window] [ 0.188635] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.188638] pci_bus 0000:01: resource 1 [mem 0x81500000-0x816fffff] [ 0.188641] pci_bus 0000:01: resource 2 [mem 0x81700000-0x818fffff 64bit pref] [ 0.188644] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.188647] pci_bus 0000:02: resource 1 [mem 0x81300000-0x813fffff] [ 0.188650] pci_bus 0000:03: resource 1 [mem 0x81200000-0x812fffff] [ 0.188653] pci_bus 0000:04: resource 1 [mem 0x81200000-0x812fffff] [ 0.188656] pci_bus 0000:05: resource 1 [mem 0x81200000-0x812fffff] [ 0.188919] NET: Registered protocol family 2 [ 0.189376] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes) [ 0.189404] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.189483] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.189575] TCP: Hash tables configured (established 16384 bind 16384) [ 0.189659] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.189683] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.189797] NET: Registered protocol family 1 [ 0.189831] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.211856] PCI: CLS 64 bytes, default 64 [ 0.211972] Unpacking initramfs... [ 1.794660] Freeing initrd memory: 49628K [ 1.794889] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns [ 1.794915] clocksource: Switched to clocksource tsc [ 1.795041] Scanning for low memory corruption every 60 seconds [ 1.796295] Initialise system trusted keyrings [ 1.796330] Key type blacklist registered [ 1.796422] workingset: timestamp_bits=36 max_order=19 bucket_order=0 [ 1.799418] zbud: loaded [ 1.800378] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.800844] fuse init (API version 7.26) [ 1.804106] Key type asymmetric registered [ 1.804109] Asymmetric key parser 'x509' registered [ 1.804193] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 1.804269] io scheduler noop registered [ 1.804271] io scheduler deadline registered [ 1.804378] io scheduler cfq registered (default) [ 1.804380] io scheduler mq-deadline registered [ 1.804382] io scheduler kyber registered [ 1.806306] pcieport 0000:00:1c.0: Signaling PME with IRQ 115 [ 1.806353] pcieport 0000:00:1c.1: Signaling PME with IRQ 116 [ 1.806399] pcieport 0000:00:1c.3: Signaling PME with IRQ 117 [ 1.806446] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 1.806578] efifb: probing for efifb [ 1.806607] efifb: framebuffer at 0x90000000, using 1920k, total 1920k [ 1.806609] efifb: mode is 800x600x32, linelength=3200, pages=1 [ 1.806610] efifb: scrolling: redraw [ 1.806613] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.810522] Console: switching to colour frame buffer device 100x37 [ 1.814187] fb0: EFI VGA frame buffer device [ 1.814208] intel_idle: MWAIT substates: 0x33000020 [ 1.814211] intel_idle: v0.4.1 model 0x4C [ 1.814224] intel_idle: max_cstate 1 reached [ 1.814391] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.814607] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.814648] ACPI: Power Button [PWRB] [ 1.814731] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.814753] ACPI: Sleep Button [SLPB] [ 1.814836] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.814873] ACPI: Power Button [PWRF] [ 1.818811] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.818814] ACPI: Thermal Zone [TZ01] (27 C) [ 1.819132] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.840371] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.843292] Linux agpgart interface v0.103 [ 1.846886] loop: module loaded [ 1.847638] libphy: Fixed MDIO Bus: probed [ 1.847640] tun: Universal TUN/TAP device driver, 1.6 [ 1.847752] PPP generic driver version 2.4.2 [ 1.847842] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.847849] ehci-pci: EHCI PCI platform driver [ 1.847868] ehci-platform: EHCI generic platform driver [ 1.847886] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.847891] ohci-pci: OHCI PCI platform driver [ 1.847908] ohci-platform: OHCI generic platform driver [ 1.847927] uhci_hcd: USB Universal Host Controller Interface driver [ 1.848295] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.848307] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.849436] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01509810 [ 1.849444] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.849721] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.849725] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.849728] usb usb1: Product: xHCI Host Controller [ 1.849731] usb usb1: Manufacturer: Linux 4.16.0-rc3+ xhci-hcd [ 1.849733] usb usb1: SerialNumber: 0000:00:14.0 [ 1.849975] hub 1-0:1.0: USB hub found [ 1.850002] hub 1-0:1.0: 7 ports detected [ 1.851145] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.851153] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.851244] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.851247] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.851250] usb usb2: Product: xHCI Host Controller [ 1.851252] usb usb2: Manufacturer: Linux 4.16.0-rc3+ xhci-hcd [ 1.851255] usb usb2: SerialNumber: 0000:00:14.0 [ 1.851469] hub 2-0:1.0: USB hub found [ 1.851494] hub 2-0:1.0: 6 ports detected [ 1.852710] i8042: PNP: No PS/2 controller found. [ 1.852836] mousedev: PS/2 mouse device common for all mice [ 1.853150] rtc_cmos 00:00: RTC can wake from S4 [ 1.853348] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 1.853391] rtc_cmos 00:00: alarms up to one day, y3k, 242 bytes nvram [ 1.853408] i2c /dev entries driver [ 1.853535] device-mapper: uevent: version 1.0.3 [ 1.853669] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.853678] intel_pstate: Intel P-state driver initializing [ 1.853831] ledtrig-cpu: registered to indicate activity on CPUs [ 1.853836] EFI Variables Facility v0.08 2004-May-17 [ 1.859506] NET: Registered protocol family 10 [ 1.866099] Segment Routing with IPv6 [ 1.866129] NET: Registered protocol family 17 [ 1.866148] Key type dns_resolver registered [ 1.866470] microcode: sig=0x406c4, pf=0x1, revision=0x404 [ 1.866541] microcode: Microcode Update Driver: v2.2. [ 1.866564] sched_clock: Marking stable (1866262187, 0)->(1846166738, 20095449) [ 1.866809] registered taskstats version 1 [ 1.866826] Loading compiled-in X.509 certificates [ 1.871426] Loaded X.509 cert 'Build time autogenerated kernel key: 80dd1f88bd927c1d211801e586877e9dfd2b6bf7' [ 1.871457] zswap: loaded using pool lzo/zbud [ 1.877567] Key type big_key registered [ 1.877572] Key type trusted registered [ 1.880726] Key type encrypted registered [ 1.880730] AppArmor: AppArmor sha1 policy hashing enabled [ 1.880734] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.880768] evm: HMAC attrs: 0x1 [ 1.881286] Magic number: 6:169:379 [ 1.881484] rtc_cmos 00:00: setting system clock to 2018-06-29 11:21:11 UTC (1530271271) [ 1.881600] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.881601] EDD information not available. [ 1.888498] Freeing unused kernel memory: 2356K [ 1.888502] Write protecting the kernel read-only data: 18432k [ 1.889593] Freeing unused kernel memory: 2008K [ 1.889840] Freeing unused kernel memory: 52K [ 1.903884] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.903886] x86/mm: Checking user space page tables [ 1.917720] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.069417] hidraw: raw HID events driver (C) Jiri Kosina [ 2.111665] ahci 0000:00:13.0: version 3.0 [ 2.111978] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 2.111982] ahci 0000:00:13.0: flags: 64bit ncq ilck pm led clo only pio slum part deso sadm sds apst [ 2.117477] scsi host0: ahci [ 2.125799] scsi host1: ahci [ 2.125900] ata1: FORCE: PHY spd limit set to 3.0Gbps [ 2.125903] ata1: SATA max UDMA/133 abar m2048@0x81415000 port 0x81415100 irq 121 [ 2.125905] ata2: FORCE: PHY spd limit set to 3.0Gbps [ 2.125907] ata2: SATA max UDMA/133 abar m2048@0x81415000 port 0x81415180 irq 121 [ 2.141195] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.144991] cryptd: max_cpu_qlen set to 1000 [ 2.153246] r8169 0000:02:00.0 eth0: RTL8168h/8111h at 0x0000000013626969, fc:aa:14:26:a8:b8, XID 14100880 IRQ 122 [ 2.153251] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.165031] SSE version of gcm_enc/dec engaged. [ 2.184043] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 2.214721] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 2.247431] Setting dangerous option disable_power_well - tainting kernel [ 2.248154] [drm:i915_driver_load [i915]] No PCH found. [ 2.248203] [drm:intel_power_domains_init [i915]] Allowed DC state mask 00 [ 2.248719] [drm:i915_driver_load [i915]] ppgtt mode: 2 [ 2.248770] [drm:intel_uc_sanitize_options [i915]] enable_guc=0 (submission:no huc:no) [ 2.248840] [drm:i915_ggtt_probe_hw [i915]] GGTT size = 2048M [ 2.248888] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M [ 2.248935] [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M [ 2.248938] checking generic (90000000 1e0000) vs hw (90000000 10000000) [ 2.248939] fb: switching to inteldrmfb from EFI VGA [ 2.248975] Console: switching to colour dummy device 80x25 [ 2.249120] [drm] Replacing VGA console driver [ 2.249198] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K [ 2.249261] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x7ba60000 [ 2.249323] [drm:intel_opregion_setup [i915]] Public ACPI methods supported [ 2.249373] [drm:intel_opregion_setup [i915]] ASLE supported [ 2.249424] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 2.249545] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params [ 2.249548] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.249549] [drm] Driver supports precise vblank timestamp query. [ 2.249600] [drm:intel_bios_init [i915]] Set default to SSC at 100000 kHz [ 2.249651] [drm:intel_bios_init [i915]] VBT signature "$VBT CHERRYVIEW ", BDB version 190 [ 2.249702] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 2.249752] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 [ 2.249805] [drm:intel_opregion_get_panel_type [i915]] Failed to get panel details from OpRegion (-19) [ 2.249855] [drm:intel_bios_init [i915]] Panel type: 14 (VBT) [ 2.249905] [drm:intel_bios_init [i915]] DRRS supported mode is static [ 2.249957] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables: [ 2.249981] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 0 148500 1920 2008 2053 2200 1080 1083 1089 1125 0x8 0xa [ 2.250031] [drm:intel_bios_init [i915]] VBT initial LVDS value 0 [ 2.250082] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 [ 2.250133] [drm:intel_bios_init [i915]] DRRS State Enabled:1 [ 2.250184] [drm:intel_bios_init [i915]] Skipping SDVO device mapping [ 2.250235] [drm:intel_bios_init [i915]] Port C VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 2.250285] [drm:intel_bios_init [i915]] Port C is internal DP [ 2.250336] [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 0 [ 2.250386] [drm:intel_bios_init [i915]] Port D VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 2.250437] [drm:intel_bios_init [i915]] VBT HDMI level shift for port D: 0 [ 2.250512] [drm:intel_dsm_detect [i915]] no _DSM method for intel device [ 2.250572] [drm:i915_driver_load [i915]] rawclk rate: 200000 kHz [ 2.250633] [drm:intel_power_domains_init_hw [i915]] Initial PHY_CONTROL=0x150607fd [ 2.250681] [drm:intel_power_well_enable [i915]] enabling always-on [ 2.250727] [drm:intel_power_well_enable [i915]] enabling display [ 2.250782] [drm:intel_power_well_enable [i915]] enabling dpio-common-bc [ 2.250961] [drm:chv_dpio_cmn_power_well_enable [i915]] Enabled DPIO PHY0 (PHY_CONTROL=0x150607fd) [ 2.251021] [drm:intel_power_well_enable [i915]] enabling dpio-common-d [ 2.251280] [drm:chv_dpio_cmn_power_well_enable [i915]] Enabled DPIO PHY1 (PHY_CONTROL=0x150607ff) [ 2.252749] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 [ 2.252801] [drm:intel_modeset_init [i915]] 3 display pipes available. [ 2.252925] [drm:intel_modeset_init [i915]] CZ clock rate: 320000 kHz [ 2.252988] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 266667 kHz, VCO 1600000 kHz, ref 0 kHz, voltage level 11 [ 2.253039] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 320000 kHz [ 2.253089] [drm:intel_modeset_init [i915]] Max dotclock rate: 304000 kHz [ 2.253097] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.253461] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port C [ 2.253515] [drm:intel_dp_init_connector [i915]] using AUX C for port C (VBT) [ 2.253572] [drm:intel_dp_pps_init [i915]] initial power sequencer for port C: pipe B [ 2.253627] [drm:intel_pps_dump_state [i915]] cur t1_t3 2000 t8 0 t9 0 t10 500 t11_t12 6000 [ 2.253678] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 2.253729] [drm:intel_dp_init_panel_power_sequencer [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 [ 2.253779] [drm:intel_dp_init_panel_power_sequencer [i915]] backlight on delay 1, off delay 200 [ 2.253833] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [ 2.253889] [drm:edp_panel_vdd_on [i915]] Turning eDP port C VDD on [ 2.253944] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 2.256449] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.256500] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.258995] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.259045] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.261539] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.261590] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.264084] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.264134] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.266627] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.266677] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.269178] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.269228] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.271729] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.271779] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.274281] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.274331] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.276834] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.276884] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.279386] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.279436] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.281938] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.281988] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.284496] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.284547] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.287048] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.287098] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.289603] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.289653] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.292155] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.292205] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.294706] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.294756] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.297259] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.297309] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.299811] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.299861] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.302363] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.302413] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.304917] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.304967] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.307467] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.307517] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.310020] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.310070] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.312585] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.312635] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.315137] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.315187] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.317691] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.317741] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.320244] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.320294] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.322797] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.322847] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.325350] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.325400] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.327901] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.327951] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.330453] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.330503] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.333004] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.333055] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.335550] [drm:intel_dp_aux_ch [i915]] dp_aux_ch intel_digital_port_connected = 0 [ 2.335608] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x70150064 [ 2.335623] [drm:drm_dp_dpcd_access [drm_kms_helper]] Too many retries, giving up. First error: -110 [ 2.335624] [drm] failed to retrieve link info, disabling eDP [ 2.335677] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port C VDD off [ 2.335731] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 2.335792] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C [ 2.335847] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (platform default) [ 2.335918] [drm:intel_dp_init_connector [i915]] Adding DP connector on port D [ 2.335970] [drm:intel_dp_init_connector [i915]] using AUX D for port D (platform default) [ 2.336030] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port D [ 2.336112] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x3 for port D (VBT) [ 2.336163] [drm:intel_dsi_init [i915]] [ 2.336225] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x0 [ 2.336289] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x0 [ 2.336341] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x0 [ 2.336393] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x0 [ 2.336445] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:40:pipe A] hw state readout: disabled [ 2.336499] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0 [ 2.336556] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0 [ 2.336608] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0 [ 2.336660] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0 [ 2.336711] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:53:pipe B] hw state readout: disabled [ 2.336765] [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0 [ 2.336817] [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0 [ 2.336876] [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0 [ 2.336928] [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0 [ 2.336979] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:66:pipe C] hw state readout: disabled [ 2.337032] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:67:HDMI C] hw state readout: disabled, pipe A [ 2.337085] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:72:DP D] hw state readout: disabled, pipe A [ 2.337138] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:74:HDMI D] hw state readout: disabled, pipe A [ 2.337197] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:68:HDMI-A-1] hw state readout: disabled [ 2.337249] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:73:DP-1] hw state readout: disabled [ 2.337302] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:75:HDMI-A-2] hw state readout: disabled [ 2.337354] [drm:intel_dump_pipe_config [i915]] [CRTC:40:pipe A][setup_hw_state] [ 2.337405] [drm:intel_dump_pipe_config [i915]] output_types: (0x0) [ 2.337463] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 0, dithering: 0 [ 2.337467] usb 1-2: New USB device found, idVendor=090c, idProduct=1000 [ 2.337519] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 2.337521] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.337523] usb 1-2: Product: Flash Drive FIT [ 2.337573] [drm:intel_dump_pipe_config [i915]] requested mode: [ 2.337598] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.337649] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 2.337650] usb 1-2: Manufacturer: Samsung [ 2.337652] usb 1-2: SerialNumber: 0356017010014265 [ 2.337670] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.337722] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 2.337773] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 2.337824] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.337875] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 2.337927] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 2.337977] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 2.338028] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] disabled, scaler_id = 0 [ 2.338079] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = 0 [ 2.338138] [drm:intel_dump_pipe_config [i915]] [PLANE:34:sprite B] disabled, scaler_id = 0 [ 2.338189] [drm:intel_dump_pipe_config [i915]] [PLANE:37:cursor A] disabled, scaler_id = 0 [ 2.338241] [drm:intel_dump_pipe_config [i915]] [CRTC:53:pipe B][setup_hw_state] [ 2.338291] [drm:intel_dump_pipe_config [i915]] output_types: (0x0) [ 2.338342] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0 [ 2.338393] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 2.338443] [drm:intel_dump_pipe_config [i915]] requested mode: [ 2.338461] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.338512] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 2.338529] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.338580] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 2.338631] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 2.338682] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.338732] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 2.338783] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 2.338843] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 2.338894] [drm:intel_dump_pipe_config [i915]] [PLANE:41:primary B] disabled, scaler_id = 0 [ 2.338945] [drm:intel_dump_pipe_config [i915]] [PLANE:44:sprite C] disabled, scaler_id = 0 [ 2.339003] [drm:intel_dump_pipe_config [i915]] [PLANE:47:sprite D] disabled, scaler_id = 0 [ 2.339054] [drm:intel_dump_pipe_config [i915]] [PLANE:50:cursor B] disabled, scaler_id = 0 [ 2.339105] [drm:intel_dump_pipe_config [i915]] [CRTC:66:pipe C][setup_hw_state] [ 2.339156] [drm:intel_dump_pipe_config [i915]] output_types: (0x0) [ 2.339207] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0 [ 2.339257] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 2.339307] [drm:intel_dump_pipe_config [i915]] requested mode: [ 2.339326] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.339376] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 2.339393] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.339445] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 2.339495] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 2.339546] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.339597] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 2.339648] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 2.339698] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 2.339749] [drm:intel_dump_pipe_config [i915]] [PLANE:54:primary C] disabled, scaler_id = 0 [ 2.339800] [drm:intel_dump_pipe_config [i915]] [PLANE:57:sprite E] disabled, scaler_id = 0 [ 2.339851] [drm:intel_dump_pipe_config [i915]] [PLANE:60:sprite F] disabled, scaler_id = 0 [ 2.339902] [drm:intel_dump_pipe_config [i915]] [PLANE:63:cursor C] disabled, scaler_id = 0 [ 2.350181] [drm:vlv_wm_get_hw_state [i915]] Punit not acking DDR DVFS request, assuming DDR DVFS is disabled [ 2.350232] [drm:vlv_wm_get_hw_state [i915]] Initial watermarks: pipe A, plane=15, cursor=15, sprite0=15, sprite1=15 [ 2.350280] [drm:vlv_wm_get_hw_state [i915]] Initial watermarks: pipe B, plane=15, cursor=15, sprite0=15, sprite1=15 [ 2.350328] [drm:vlv_wm_get_hw_state [i915]] Initial watermarks: pipe C, plane=15, cursor=15, sprite0=15, sprite1=15 [ 2.350374] [drm:vlv_wm_get_hw_state [i915]] Initial watermarks: SR plane=127, SR cursor=0 level=0 cxsr=0 [ 2.350531] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [1000, 80000000] [ 2.350656] [drm:i915_gem_contexts_init [i915]] logical context support initialized [ 2.350728] [drm:intel_engine_create_scratch [i915]] rcs0 pipe control offset: 0x7ffff000 [ 2.350942] [drm:intel_engine_init_common [i915]] rcs0 hws offset: 0x00002000 [ 2.351067] [drm:intel_engine_init_common [i915]] bcs0 hws offset: 0x00004000 [ 2.351187] [drm:intel_engine_init_common [i915]] vcs0 hws offset: 0x00006000 [ 2.351312] [drm:intel_engine_init_common [i915]] vecs0 hws offset: 0x00008000 [ 2.351361] [drm:intel_init_gt_powersave [i915]] PCBR: 0x7eef8001 [ 2.351413] [drm:intel_init_gt_powersave [i915]] GPLL reference freq: 40000 kHz [ 2.351463] [drm:intel_init_gt_powersave [i915]] DDR speed: 1600 MHz [ 2.351513] [drm:intel_init_gt_powersave [i915]] max GPU freq: 600 MHz (60) [ 2.351563] [drm:intel_init_gt_powersave [i915]] RPe GPU freq: 320 MHz (32) [ 2.351613] [drm:intel_init_gt_powersave [i915]] RP1(Guar) GPU freq: 320 MHz (32) [ 2.351662] [drm:intel_init_gt_powersave [i915]] min GPU freq: 200 MHz (20) [ 2.351718] [drm:gen8_init_common_ring [i915]] Execlists enabled for rcs0 [ 2.351769] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 9 [ 2.351821] [drm:gen8_init_common_ring [i915]] Execlists enabled for bcs0 [ 2.351873] [drm:gen8_init_common_ring [i915]] Execlists enabled for vcs0 [ 2.351924] [drm:gen8_init_common_ring [i915]] Execlists enabled for vecs0 [ 2.352115] [drm:intel_enable_gt_powersave [i915]] GPLL enabled? yes [ 2.352162] [drm:intel_enable_gt_powersave [i915]] GPU status: 0x00002010 [ 2.352509] [drm:intel_fbdev_init [i915]] pipe A not active or no fb, skipping [ 2.352560] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping [ 2.352610] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping [ 2.352660] [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config [ 2.353533] [drm:intel_dp_connector_register [i915]] registering DPDDC-D bus for card0-DP-1 [ 2.353982] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0 [ 2.354167] [drm:intel_opregion_register [i915]] 3 outputs detected [ 2.355070] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.355477] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 2.356329] i915 device info: pciid=0x22b1 rev=0x35 platform=CHERRYVIEW gen=8 [ 2.356331] i915 device info: is_mobile: no [ 2.356332] i915 device info: is_lp: yes [ 2.356350] [drm:drm_setup_crtcs [drm_kms_helper]] [ 2.356352] i915 device info: is_alpha_support: no [ 2.356353] i915 device info: has_64bit_reloc: yes [ 2.356354] i915 device info: has_aliasing_ppgtt: yes [ 2.356364] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:68:HDMI-A-1] [ 2.356366] i915 device info: has_csr: no [ 2.356368] i915 device info: has_ddi: no [ 2.356369] i915 device info: has_dp_mst: no [ 2.356440] [drm:intel_hdmi_detect [i915]] [CONNECTOR:68:HDMI-A-1] [ 2.356442] i915 device info: has_reset_engine: yes [ 2.356443] i915 device info: has_fbc: no [ 2.356444] i915 device info: has_fpga_dbg: no [ 2.356445] i915 device info: has_full_ppgtt: yes [ 2.356446] i915 device info: has_full_48bit_ppgtt: no [ 2.356447] i915 device info: has_gmch_display: yes [ 2.356448] i915 device info: has_guc: no [ 2.356449] i915 device info: has_guc_ct: no [ 2.356450] i915 device info: has_hotplug: yes [ 2.356451] i915 device info: has_l3_dpf: no [ 2.356453] i915 device info: has_llc: no [ 2.356454] i915 device info: has_logical_ring_contexts: yes [ 2.356455] i915 device info: has_logical_ring_preemption: no [ 2.356456] i915 device info: has_overlay: no [ 2.356457] i915 device info: has_pooled_eu: no [ 2.356458] i915 device info: has_psr: yes [ 2.356459] i915 device info: has_rc6: yes [ 2.356460] i915 device info: has_rc6p: no [ 2.356461] i915 device info: has_resource_streamer: yes [ 2.356462] i915 device info: has_runtime_pm: yes [ 2.356464] i915 device info: has_snoop: yes [ 2.356465] i915 device info: unfenced_needs_alignment: no [ 2.356466] i915 device info: cursor_needs_physical: no [ 2.356467] i915 device info: hws_needs_physical: no [ 2.356468] i915 device info: overlay_needs_physical: no [ 2.356469] i915 device info: supports_tv: no [ 2.356470] i915 device info: has_ipc: no [ 2.356471] i915 device info: slice mask: 0001 [ 2.356472] i915 device info: slice total: 1 [ 2.356474] i915 device info: subslice total: 2 [ 2.356475] i915 device info: subslice mask 0003 [ 2.356476] i915 device info: subslice per slice: 2 [ 2.356477] i915 device info: EU total: 12 [ 2.356478] i915 device info: EU per subslice: 6 [ 2.356479] i915 device info: has slice power gating: no [ 2.356480] i915 device info: has subslice power gating: yes [ 2.356481] i915 device info: has EU power gating: yes [ 2.356482] i915 device info: CS timestamp frequency: 12500 kHz [ 2.416345] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 [ 2.442281] ata1: SATA link down (SStatus 4 SControl 320) [ 2.442331] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 2.448044] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 2.448097] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 2.448148] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 2.464021] usb 1-4: new full-speed USB device number 3 using xhci_hcd [ 2.480042] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 2.480095] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 2.541783] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 [ 2.572033] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 2.572044] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:68:HDMI-A-1] status updated from unknown to disconnected [ 2.572057] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:68:HDMI-A-1] disconnected [ 2.572069] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:DP-1] [ 2.572148] [drm:intel_dp_detect [i915]] [CONNECTOR:73:DP-1] [ 2.572159] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:DP-1] status updated from unknown to disconnected [ 2.572172] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:DP-1] disconnected [ 2.572181] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:75:HDMI-A-2] [ 2.572243] [drm:intel_hdmi_detect [i915]] [CONNECTOR:75:HDMI-A-2] [ 2.572469] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 2.572519] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry [ 2.572734] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 2.572755] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus panel [ 2.572805] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 2.572855] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1 [ 2.573481] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus panel [ 2.573531] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0 [ 2.573751] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0040 w(1) [ 2.573801] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry [ 2.574015] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0040 w(1) [ 2.574028] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 2.574037] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:75:HDMI-A-2] status updated from unknown to disconnected [ 2.574046] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:75:HDMI-A-2] disconnected [ 2.574055] [drm:drm_setup_crtcs [drm_kms_helper]] No connectors reported connected with modes [ 2.574063] [drm:drm_setup_crtcs [drm_kms_helper]] connector 68 enabled? no [ 2.574072] [drm:drm_setup_crtcs [drm_kms_helper]] connector 73 enabled? no [ 2.574080] [drm:drm_setup_crtcs [drm_kms_helper]] connector 75 enabled? no [ 2.574135] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 2.574145] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 8192x8192 config [ 2.574149] [drm] Cannot find any crtc or sizes [ 2.574172] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000000a53335d [ 2.574192] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:28:primary A] 00000000e6a81524 state to 000000000a53335d [ 2.574210] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:sprite A] 00000000ae5e5137 state to 000000000a53335d [ 2.574227] [drm:drm_atomic_set_crtc_for_plane [drm]] Link plane state 00000000ae5e5137 to [NOCRTC] [ 2.574244] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for plane state 00000000ae5e5137 [ 2.574261] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:34:sprite B] 0000000088ceefaa state to 000000000a53335d [ 2.574278] [drm:drm_atomic_set_crtc_for_plane [drm]] Link plane state 0000000088ceefaa to [NOCRTC] [ 2.574294] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for plane state 0000000088ceefaa [ 2.574312] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:37:cursor A] 000000004bf62634 state to 000000000a53335d [ 2.574329] [drm:drm_atomic_set_crtc_for_plane [drm]] Link plane state 000000004bf62634 to [NOCRTC] [ 2.574345] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for plane state 000000004bf62634 [ 2.574370] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:41:primary B] 000000009f644a06 state to 000000000a53335d [ 2.574387] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:44:sprite C] 00000000570408fc state to 000000000a53335d [ 2.574404] [drm:drm_atomic_set_crtc_for_plane [drm]] Link plane state 00000000570408fc to [NOCRTC] [ 2.574420] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for plane state 00000000570408fc [ 2.574438] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:sprite D] 00000000b389d0c0 state to 000000000a53335d [ 2.574454] [drm:drm_atomic_set_crtc_for_plane [drm]] Link plane state 00000000b389d0c0 to [NOCRTC] [ 2.574471] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for plane state 00000000b389d0c0 [ 2.574488] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:50:cursor B] 00000000cd958cd3 state to 000000000a53335d [ 2.574505] [drm:drm_atomic_set_crtc_for_plane [drm]] Link plane state 00000000cd958cd3 to [NOCRTC] [ 2.574521] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for plane state 00000000cd958cd3 [ 2.574539] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:54:primary C] 000000003171b376 state to 000000000a53335d [ 2.574556] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:57:sprite E] 000000008f88b0d6 state to 000000000a53335d [ 2.574573] [drm:drm_atomic_set_crtc_for_plane [drm]] Link plane state 000000008f88b0d6 to [NOCRTC] [ 2.574589] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for plane state 000000008f88b0d6 [ 2.574607] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:sprite F] 0000000062231220 state to 000000000a53335d [ 2.574623] [drm:drm_atomic_set_crtc_for_plane [drm]] Link plane state 0000000062231220 to [NOCRTC] [ 2.574640] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for plane state 0000000062231220 [ 2.574657] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:63:cursor C] 00000000fd7bfdeb state to 000000000a53335d [ 2.574674] [drm:drm_atomic_set_crtc_for_plane [drm]] Link plane state 00000000fd7bfdeb to [NOCRTC] [ 2.574690] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for plane state 00000000fd7bfdeb [ 2.574709] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:40:pipe A] 00000000e46f1a04 state to 000000000a53335d [ 2.574727] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for CRTC state 00000000e46f1a04 [ 2.574743] [drm:drm_atomic_set_crtc_for_plane [drm]] Link plane state 00000000e6a81524 to [NOCRTC] [ 2.574760] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for plane state 00000000e6a81524 [ 2.574777] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:40:pipe A] to 000000000a53335d [ 2.574796] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:53:pipe B] 00000000b2d4f6fb state to 000000000a53335d [ 2.574813] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for CRTC state 00000000b2d4f6fb [ 2.574830] [drm:drm_atomic_set_crtc_for_plane [drm]] Link plane state 000000009f644a06 to [NOCRTC] [ 2.574846] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for plane state 000000009f644a06 [ 2.574863] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:53:pipe B] to 000000000a53335d [ 2.574882] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:66:pipe C] 000000006d1d5ec4 state to 000000000a53335d [ 2.574898] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for CRTC state 000000006d1d5ec4 [ 2.574915] [drm:drm_atomic_set_crtc_for_plane [drm]] Link plane state 000000003171b376 to [NOCRTC] [ 2.574931] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for plane state 000000003171b376 [ 2.574948] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:66:pipe C] to 000000000a53335d [ 2.574965] [drm:drm_atomic_check_only [drm]] checking 000000000a53335d [ 2.574989] [drm:drm_atomic_commit [drm]] committing 000000000a53335d [ 2.575023] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000000a53335d [ 2.575043] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000000a53335d [ 2.614005] usb 1-4: New USB device found, idVendor=7f17, idProduct=0011 [ 2.614008] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.614010] usb 1-4: Product: Nucleus Control Board [ 2.614012] usb 1-4: Manufacturer: True Fitness Technology Inc. [ 2.740017] usb 1-5: new high-speed USB device number 4 using xhci_hcd [ 2.889114] usb 1-5: New USB device found, idVendor=05e3, idProduct=0608 [ 2.889119] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.889120] usb 1-5: Product: USB2.0 Hub [ 2.889681] hub 1-5:1.0: USB hub found [ 2.889923] hub 1-5:1.0: 4 ports detected [ 2.904148] usb-storage 1-2:1.0: USB Mass Storage device detected [ 2.904384] scsi host2: usb-storage 1-2:1.0 [ 2.904511] usbcore: registered new interface driver usb-storage [ 2.905026] usbcore: registered new interface driver usbhid [ 2.905028] usbhid: USB HID core driver [ 2.906936] usbcore: registered new interface driver uas [ 2.909164] hid-generic 0003:7F17:0011.0001: hiddev0,hidraw0: USB HID v1.11 Device [True Fitness Technology Inc. Nucleus Control Board] on usb-0000:00:14.0-4/input0 [ 3.176020] usb 1-5.1: new full-speed USB device number 5 using xhci_hcd [ 3.284907] usb 1-5.1: New USB device found, idVendor=03eb, idProduct=212c [ 3.284911] usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.284912] usb 1-5.1: Product: Atmel maXTouch Digitizer [ 3.284914] usb 1-5.1: Manufacturer: Atmel [ 3.290786] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1:1.0/0003:03EB:212C.0002/input/input4 [ 3.290999] hid-generic 0003:03EB:212C.0002: input,hiddev1,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-5.1/input0 [ 3.294226] hid-generic 0003:03EB:212C.0003: hiddev2,hidraw2: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-5.1/input1 [ 3.376025] usb 1-5.2: new high-speed USB device number 6 using xhci_hcd [ 3.478413] usb 1-5.2: New USB device found, idVendor=2040, idProduct=b150 [ 3.478417] usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.478421] usb 1-5.2: Product: Hauppauge Device [ 3.478422] usb 1-5.2: Manufacturer: Hauppauge [ 3.478424] usb 1-5.2: SerialNumber: 4035980703 [ 3.568022] usb 1-5.4: new full-speed USB device number 7 using xhci_hcd [ 3.669732] usb 1-5.4: string descriptor 0 read error: -22 [ 3.669738] usb 1-5.4: New USB device found, idVendor=0cf3, idProduct=3004 [ 3.669740] usb 1-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.184062] scsi 2:0:0:0: Direct-Access Samsung Flash Drive FIT 1100 PQ: 0 ANSI: 6 [ 4.184441] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 4.185152] sd 2:0:0:0: [sda] 125337600 512-byte logical blocks: (64.2 GB/59.8 GiB) [ 4.185747] sd 2:0:0:0: [sda] Write Protect is off [ 4.185750] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 4.186352] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.191245] sda: sda1 sda2 sda3 [ 4.193657] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 7.648027] ata2.00: qc timeout (cmd 0x47) [ 7.650157] ata2.00: READ LOG DMA EXT failed, trying PIO [ 7.650160] ata2.00: NCQ Send/Recv Log not supported [ 7.650163] ata2.00: ATA-10: InnoDisk Corp. - mSATA 3ME4, L17606, max UDMA/133 [ 7.650165] ata2.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 7.650174] ata2.00: failed to set xfermode (err_mask=0x40) [ 7.966232] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 7.976255] ata2.00: NCQ Send/Recv Log not supported [ 7.991490] ata2.00: NCQ Send/Recv Log not supported [ 7.991496] ata2.00: configured for UDMA/133 [ 7.991709] scsi 1:0:0:0: Direct-Access ATA InnoDisk Corp. - 06 PQ: 0 ANSI: 5 [ 7.992029] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 7.992161] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 7.992187] sd 1:0:0:0: [sdb] Write Protect is off [ 7.992190] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 7.992227] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.994062] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 [ 7.994752] sd 1:0:0:0: [sdb] Attached SCSI disk [ 9.276014] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:68:HDMI-A-1] [ 9.276102] [drm:intel_hdmi_detect [i915]] [CONNECTOR:68:HDMI-A-1] [ 9.337166] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 [ 9.368044] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 9.368084] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 9.368123] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 9.400035] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 9.400075] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 9.461738] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 [ 9.492034] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 9.492045] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:68:HDMI-A-1] disconnected [ 9.492083] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:DP-1] [ 9.492124] [drm:intel_dp_detect [i915]] [CONNECTOR:73:DP-1] [ 9.492135] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:DP-1] disconnected [ 9.492152] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:75:HDMI-A-2] [ 9.492191] [drm:intel_hdmi_detect [i915]] [CONNECTOR:75:HDMI-A-2] [ 9.492401] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 9.492439] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry [ 9.492644] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 9.492666] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus panel [ 9.492705] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 9.492743] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1 [ 9.493369] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus panel [ 9.493408] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0 [ 9.493613] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0040 w(1) [ 9.493652] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry [ 9.493856] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0040 w(1) [ 9.493868] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 9.493877] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:75:HDMI-A-2] disconnected [ 9.553742] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null) [ 9.590895] EXT4-fs (sdb3): couldn't mount as ext3 due to feature incompatibilities [ 9.591310] EXT4-fs (sdb3): couldn't mount as ext2 due to feature incompatibilities [ 9.607198] EXT4-fs (sdb3): recovery complete [ 9.608805] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) [ 9.799460] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 9.816119] systemd[1]: Detected architecture x86-64. [ 9.816481] systemd[1]: Set hostname to . [ 9.834999] systemd-fstab-generator[349]: Checking was requested for "/media/root-ro/", but it is not a device. [ 9.931815] systemd[1]: Started Trigger resolvconf update for networkd DNS. [ 9.932102] systemd[1]: Listening on Journal Socket. [ 9.932256] systemd[1]: Listening on Journal Audit Socket. [ 9.932321] systemd[1]: Listening on Journal Socket (/dev/log). [ 9.932631] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 9.932826] systemd[1]: Created slice User and Session Slice. [ 9.932849] systemd[1]: Reached target Remote File Systems (Pre). [ 10.126641] systemd-journald[359]: Received request to flush runtime journal from PID 1 [ 10.488253] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:68:HDMI-A-1] [ 10.488310] [drm:intel_hdmi_detect [i915]] [CONNECTOR:68:HDMI-A-1] [ 10.517494] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.548098] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 [ 10.584262] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 10.584322] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 10.584362] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 10.623950] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 10.624018] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 10.684091] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 [ 10.692275] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 10.724889] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1:1.0/0003:03EB:212C.0002/input/input6 [ 10.725850] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 10.725884] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:68:HDMI-A-1] disconnected [ 10.725924] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:DP-1] [ 10.725989] [drm:intel_dp_detect [i915]] [CONNECTOR:73:DP-1] [ 10.726002] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:DP-1] disconnected [ 10.726019] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:75:HDMI-A-2] [ 10.726059] [drm:intel_hdmi_detect [i915]] [CONNECTOR:75:HDMI-A-2] [ 10.726519] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 10.726558] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry [ 10.726763] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 10.726788] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus panel [ 10.726828] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 10.726867] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1 [ 10.727568] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus panel [ 10.727608] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0 [ 10.727847] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0040 w(1) [ 10.727898] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry [ 10.728932] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0040 w(1) [ 10.728950] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 10.728961] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:75:HDMI-A-2] disconnected [ 10.732393] hid-multitouch 0003:03EB:212C.0002: input,hiddev1,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-5.1/input0 [ 10.775261] Bluetooth: Core ver 2.22 [ 10.775297] NET: Registered protocol family 31 [ 10.775298] Bluetooth: HCI device and connection manager initialized [ 10.775304] Bluetooth: HCI socket layer initialized [ 10.775308] Bluetooth: L2CAP socket layer initialized [ 10.775324] Bluetooth: SCO socket layer initialized [ 10.805296] usbcore: registered new interface driver btusb [ 10.821117] usbcore: registered new interface driver ath3k [ 10.842271] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 10.858803] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 10.859843] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 10.859848] cfg80211: failed to load regulatory.db [ 10.886092] Adding 1952764k swap on /dev/sdb2. Priority:-2 extents:1 across:1952764k SSFS [ 11.078932] intel_rapl: Found RAPL domain package [ 11.078935] intel_rapl: Found RAPL domain core [ 11.305275] audit: type=1400 audit(1530271280.920:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=627 comm="apparmor_parser" [ 11.305282] audit: type=1400 audit(1530271280.920:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=627 comm="apparmor_parser" [ 11.305286] audit: type=1400 audit(1530271280.920:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=627 comm="apparmor_parser" [ 11.305289] audit: type=1400 audit(1530271280.920:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=627 comm="apparmor_parser" [ 11.309714] audit: type=1400 audit(1530271280.924:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=626 comm="apparmor_parser" [ 11.309722] audit: type=1400 audit(1530271280.924:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=626 comm="apparmor_parser" [ 11.314302] audit: type=1400 audit(1530271280.928:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=641 comm="apparmor_parser" [ 11.332221] audit: type=1400 audit(1530271280.944:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=642 comm="apparmor_parser" [ 11.336423] audit: type=1400 audit(1530271280.952:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=645 comm="apparmor_parser" [ 11.403645] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 11.569530] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:line [ 11.569534] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 11.569537] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 11.569538] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 11.569540] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 11.569542] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 11.569544] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 11.569546] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 11.674108] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 11.674151] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 11.674190] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 11.681064] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 11.681161] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 11.681253] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 11.681344] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 11.681433] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 11.681521] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 11.681615] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 11.781682] ath9k 0000:05:00.0: enabling device (0000 -> 0002) [ 11.942286] ath: EEPROM regdomain: 0x60 [ 11.942289] ath: EEPROM indicates we should expect a direct regpair map [ 11.942292] ath: Country alpha2 being used: 00 [ 11.942293] ath: Regpair used: 0x60 [ 11.994855] random: crng init done [ 12.011850] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 12.012656] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffaf2c40c80000, irq=18 [ 12.054417] ath9k 0000:05:00.0 wlp5s0: renamed from wlan0 [ 12.167683] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 12.198858] r8169 0000:02:00.0 enp2s0: link down [ 12.198974] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 12.233876] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready [ 12.249628] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready [ 12.391723] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready [ 12.648352] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 12.649010] [drm:intel_framebuffer_init [i915]] No Y tiling for legacy addfb [ 12.649034] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer [ 12.649092] [drm:intel_framebuffer_init [i915]] Unsupported tiling 0x100000000000002! [ 12.649109] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer [ 12.649149] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 12.649405] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000a03c7831 [ 12.649426] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:37:cursor A] 00000000ad69efe7 state to 00000000a03c7831 [ 12.649443] [drm:drm_atomic_set_crtc_for_plane [drm]] Link plane state 00000000ad69efe7 to [NOCRTC] [ 12.649460] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for plane state 00000000ad69efe7 [ 12.649476] [drm:drm_atomic_check_only [drm]] checking 00000000a03c7831 [ 12.649497] [drm:drm_atomic_commit [drm]] committing 00000000a03c7831 [ 12.649539] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000a03c7831 [ 12.649558] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000a03c7831 [ 12.649646] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000a03c7831 [ 12.649665] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:50:cursor B] 000000004bf62634 state to 00000000a03c7831 [ 12.649682] [drm:drm_atomic_set_crtc_for_plane [drm]] Link plane state 000000004bf62634 to [NOCRTC] [ 12.649699] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for plane state 000000004bf62634 [ 12.649715] [drm:drm_atomic_check_only [drm]] checking 00000000a03c7831 [ 12.649733] [drm:drm_atomic_commit [drm]] committing 00000000a03c7831 [ 12.650070] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000a03c7831 [ 12.650088] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000a03c7831 [ 12.650313] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000a03c7831 [ 12.650334] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:63:cursor C] 0000000094f7c700 state to 00000000a03c7831 [ 12.650351] [drm:drm_atomic_set_crtc_for_plane [drm]] Link plane state 0000000094f7c700 to [NOCRTC] [ 12.650367] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for plane state 0000000094f7c700 [ 12.650384] [drm:drm_atomic_check_only [drm]] checking 00000000a03c7831 [ 12.650403] [drm:drm_atomic_commit [drm]] committing 00000000a03c7831 [ 12.650434] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000a03c7831 [ 12.650451] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000a03c7831 [ 12.689431] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.689434] Bluetooth: BNEP filters: protocol multicast [ 12.689441] Bluetooth: BNEP socket layer initialized [ 12.738979] [drm:drm_mode_addfb2 [drm]] [FB:76] [ 14.652119] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:DP-1] [ 14.652175] [drm:intel_dp_detect [i915]] [CONNECTOR:73:DP-1] [ 14.652191] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:DP-1] disconnected [ 14.652221] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:68:HDMI-A-1] [ 14.652261] [drm:intel_hdmi_detect [i915]] [CONNECTOR:68:HDMI-A-1] [ 14.712066] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 [ 14.744059] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 14.744107] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 14.744147] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 14.776057] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 14.776105] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 14.837597] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 [ 14.868099] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 14.868111] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:68:HDMI-A-1] disconnected [ 14.868151] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:75:HDMI-A-2] [ 14.868203] [drm:intel_hdmi_detect [i915]] [CONNECTOR:75:HDMI-A-2] [ 14.868413] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 14.868452] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry [ 14.868654] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 14.868678] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus panel [ 14.868717] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 14.868756] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1 [ 14.869382] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus panel [ 14.869421] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0 [ 14.869624] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0040 w(1) [ 14.869663] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry [ 14.869865] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0040 w(1) [ 14.869877] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 14.869886] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:75:HDMI-A-2] disconnected [ 16.064468] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 16.064603] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 16.064644] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 16.464888] Bluetooth: RFCOMM TTY layer initialized [ 16.464898] Bluetooth: RFCOMM socket layer initialized [ 16.464916] Bluetooth: RFCOMM ver 1.11 [ 18.022126] audit: type=1400 audit(1530271287.636:11): apparmor="DENIED" operation="open" info="Failed name lookup - disconnected path" error=-13 profile="/usr/sbin/ntpd" name="sbin" pid=1241 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 18.022135] audit: type=1400 audit(1530271287.636:12): apparmor="DENIED" operation="open" info="Failed name lookup - disconnected path" error=-13 profile="/usr/sbin/ntpd" name="bin" pid=1241 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 18.022463] audit: type=1400 audit(1530271287.636:13): apparmor="DENIED" operation="open" info="Failed name lookup - disconnected path" error=-13 profile="/usr/sbin/ntpd" name="usr/sbin" pid=1241 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 18.022586] audit: type=1400 audit(1530271287.636:14): apparmor="DENIED" operation="open" info="Failed name lookup - disconnected path" error=-13 profile="/usr/sbin/ntpd" name="usr/bin" pid=1241 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 19.837738] wlp5s0: authenticate with 10:0d:7f:45:ee:4d [ 19.854034] wlp5s0: send auth to 10:0d:7f:45:ee:4d (try 1/3) [ 19.856413] wlp5s0: authenticated [ 19.860116] wlp5s0: associate with 10:0d:7f:45:ee:4d (try 1/3) [ 19.864353] wlp5s0: RX AssocResp from 10:0d:7f:45:ee:4d (capab=0x431 status=0 aid=2) [ 19.864530] wlp5s0: associated [ 19.961277] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready [ 27.334086] wlp5s0: deauthenticating from 10:0d:7f:45:ee:4d by local choice (Reason: 3=DEAUTH_LEAVING) [ 31.133668] wlp5s0: authenticate with 10:0d:7f:45:ee:4d [ 31.149042] wlp5s0: send auth to 10:0d:7f:45:ee:4d (try 1/3) [ 31.152150] wlp5s0: authenticated [ 31.172064] wlp5s0: associate with 10:0d:7f:45:ee:4d (try 1/3) [ 31.176350] wlp5s0: RX AssocResp from 10:0d:7f:45:ee:4d (capab=0x431 status=0 aid=2) [ 31.176531] wlp5s0: associated