[ 0.000000] Linux version 4.18.0-rc8-62dae6e374af (buus@michael-hp) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #1 SMP Sun Aug 12 14:18:12 EDT 2018 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] Disabled fast string operations [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000004f7d37ff] usable [ 0.000000] BIOS-e820: [mem 0x000000004f7d3800-0x000000004fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000f0006fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0008000-0x00000000f000bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fee0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: Dell Inc. ME051 /0DK344, BIOS A10 11/07/2006 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x4f7d3 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FF0000000 write-back [ 0.000000] 2 base 04F800000 mask FFF800000 uncachable [ 0.000000] 3 base 0FEDA0000 mask FFFFE0000 write-through [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: PAT not supported by CPU. [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x0b3fffff] [ 0.000000] Base memory trampoline at [(ptrval)] 9b000 size 16384 [ 0.000000] BRK [0x0afa2000, 0x0afa2fff] PGTABLE [ 0.000000] BRK [0x0afa3000, 0x0afa3fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x32127000-0x3508afff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FC970 000014 (v00 DELL ) [ 0.000000] ACPI: RSDT 0x000000004F7D4425 000038 (v01 DELL D05 27D60B07 ASL 00000061) [ 0.000000] ACPI: FACP 0x000000004F7D4C00 000074 (v01 DELL D05 27D60B07 ASL 00000061) [ 0.000000] ACPI: DSDT 0x000000004F7D5800 00324F (v01 INT430 SYSFexxx 00001001 MSFT 0100000E) [ 0.000000] ACPI: FACS 0x000000004F7E4000 000040 [ 0.000000] ACPI: APIC 0x000000004F7D5400 000068 (v01 DELL D05 27D60B07 ASL 00000047) [ 0.000000] ACPI: MCFG 0x000000004F7D53C0 00003E (v16 DELL D05 27D60B07 ASL 00000061) [ 0.000000] ACPI: SSDT 0x000000004F7D4658 0001D8 (v01 PmRef Cpu0Cst 00003001 INTL 20030522) [ 0.000000] ACPI: SSDT 0x000000004F7D445D 0001FB (v01 PmRef CpuPm 00003000 INTL 20030522) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 383MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] BRK [0x0afa4000, 0x0afa4fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff] [ 0.000000] HighMem [mem 0x00000000377fe000-0x000000004f7d2fff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000004f7d2fff] [ 0.000000] Reserved but unavailable: 67727 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000004f7d2fff] [ 0.000000] On node 0 totalpages: 325489 [ 0.000000] DMA zone: 40 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 2180 pages used for memmap [ 0.000000] Normal zone: 223230 pages, LIFO batch:31 [ 0.000000] HighMem zone: 98261 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Reserving Intel graphics memory at [mem 0x4f800000-0x4fffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] [mem 0x50000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x81/0x482 with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 30 pages/cpu @(ptrval) s94028 r0 d28852 u122880 [ 0.000000] pcpu-alloc: s94028 r0 d28852 u122880 alloc=30*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 323269 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-rc8-62dae6e374af root=UUID=227fd991-981b-442f-a3e8-c75524e1489b ro drm.debug=0xe [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0004f7d3) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 1220940K/1301956K available (9137K kernel code, 928K rwdata, 3512K rodata, 1088K init, 836K bss, 81016K reserved, 0K cma-reserved, 393044K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xfff14000 - 0xfffff000 ( 940 kB) cpu_entry : 0xffa00000 - 0xffb39000 (1252 kB) pkmap : 0xff800000 - 0xffa00000 (2048 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xcad5d000 - 0xcae6d000 (1088 kB) .data : 0xca8ec508 - 0xcad49280 (4467 kB) .text : 0xca000000 - 0xca8ec508 (9137 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] ftrace: allocating 38828 entries in 76 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16 [ 0.000000] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 1572864 bytes of page_ext [ 0.000000] ACPI: Core revision 20180531 [ 0.004000] APIC: Switch to symmetric I/O mode setup [ 0.004000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.024000] tsc: Fast TSC calibration using PIT [ 0.028000] tsc: Detected 1496.296 MHz processor [ 0.028000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x159177a8b3f, max_idle_ns: 440795264205 ns [ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2992.59 BogoMIPS (lpj=5985184) [ 0.028000] pid_max: default: 32768 minimum: 301 [ 0.028000] Security Framework initialized [ 0.028000] Yama: becoming mindful. [ 0.028000] AppArmor: AppArmor initialized [ 0.028000] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.028000] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.032198] Disabled fast string operations [ 0.032226] mce: CPU supports 5 MCE banks [ 0.032240] CPU0: Thermal monitoring enabled (TM1) [ 0.032261] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2 [ 0.032267] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0 [ 0.032277] Spectre V2 : Mitigation: Full generic retpoline [ 0.032284] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch [ 0.032291] Speculative Store Bypass: Vulnerable [ 0.056000] smpboot: CPU0: Intel(R) Celeron(R) M processor 1.50GHz (family: 0x6, model: 0xd, stepping: 0x8) [ 0.056000] Performance Events: p6 PMU driver. [ 0.056000] ... version: 0 [ 0.056000] ... bit width: 32 [ 0.056000] ... generic registers: 2 [ 0.056000] ... value mask: 00000000ffffffff [ 0.056000] ... max period: 000000007fffffff [ 0.056000] ... fixed-purpose events: 0 [ 0.056000] ... event mask: 0000000000000003 [ 0.056000] Hierarchical SRCU implementation. [ 0.056000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.056000] smp: Bringing up secondary CPUs ... [ 0.056000] smp: Brought up 1 node, 1 CPU [ 0.056000] smpboot: Max logical packages: 2 [ 0.056000] smpboot: Total of 1 processors activated (2992.59 BogoMIPS) [ 0.056000] devtmpfs: initialized [ 0.056052] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.056068] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.056197] pinctrl core: initialized pinctrl subsystem [ 0.056424] RTC time: 18:46:30, date: 08/16/18 [ 0.056769] NET: Registered protocol family 16 [ 0.057067] audit: initializing netlink subsys (disabled) [ 0.057424] EISA bus registered [ 0.057433] cpuidle: using governor ladder [ 0.057439] cpuidle: using governor menu [ 0.057567] ACPI: bus type PCI registered [ 0.057575] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.057703] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.057717] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.057724] PCI: Using MMCONFIG for extended config space [ 0.057730] PCI: Using configuration type 1 for base access [ 0.060030] audit: type=2000 audit(1534445190.056:1): state=initialized audit_enabled=0 res=1 [ 0.061531] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.062096] ACPI: Added _OSI(Module Device) [ 0.062106] ACPI: Added _OSI(Processor Device) [ 0.062113] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.062119] ACPI: Added _OSI(Processor Aggregator Device) [ 0.062127] ACPI: Added _OSI(Linux-Dell-Video) [ 0.068195] ACPI: 3 ACPI AML tables successfully acquired and loaded [ 0.072751] ACPI: Interpreter enabled [ 0.072802] ACPI: (supports S0 S3 S4 S5) [ 0.072809] ACPI: Using IOAPIC for interrupt routing [ 0.072864] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.073221] ACPI: Enabled 12 GPEs in block 00 to 1F [ 0.142023] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.142044] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.142062] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.153950] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored) [ 0.153953] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored) [ 0.153957] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored) [ 0.153960] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored) [ 0.153963] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff window] (ignored) [ 0.153966] acpi PNP0A03:00: host bridge window [mem 0x50000000-0xdfffffff window] (ignored) [ 0.153970] acpi PNP0A03:00: host bridge window [mem 0xf0007000-0xf0007fff window] (ignored) [ 0.153973] acpi PNP0A03:00: host bridge window [mem 0xf000c000-0xfebfffff window] (ignored) [ 0.153976] acpi PNP0A03:00: host bridge window [mem 0xfec10000-0xfed1ffff window] (ignored) [ 0.153979] acpi PNP0A03:00: host bridge window [mem 0xfee10000-0xffafffff window] (ignored) [ 0.153981] PCI: root bus 00: using default resources [ 0.154395] PCI host bridge to bus 0000:00 [ 0.154406] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.154415] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.154425] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.154447] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000 [ 0.154698] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000 [ 0.154715] pci 0000:00:02.0: reg 0x10: [mem 0xdff00000-0xdff7ffff] [ 0.154724] pci 0000:00:02.0: reg 0x14: [io 0xeff8-0xefff] [ 0.154732] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref] [ 0.154740] pci 0000:00:02.0: reg 0x1c: [mem 0xdfec0000-0xdfefffff] [ 0.154939] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000 [ 0.154954] pci 0000:00:02.1: reg 0x10: [mem 0xdff80000-0xdfffffff] [ 0.155222] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300 [ 0.155262] pci 0000:00:1b.0: reg 0x10: [mem 0xdfebc000-0xdfebffff 64bit] [ 0.155395] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.155605] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400 [ 0.155677] pci 0000:00:1c.0: enabling Extended Tags [ 0.155766] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.155984] pci 0000:00:1c.3: [8086:2666] type 01 class 0x060400 [ 0.156060] pci 0000:00:1c.3: enabling Extended Tags [ 0.156148] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.156363] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300 [ 0.156435] pci 0000:00:1d.0: reg 0x20: [io 0xbf80-0xbf9f] [ 0.156650] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300 [ 0.156721] pci 0000:00:1d.1: reg 0x20: [io 0xbf60-0xbf7f] [ 0.156939] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300 [ 0.157009] pci 0000:00:1d.2: reg 0x20: [io 0xbf40-0xbf5f] [ 0.157222] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300 [ 0.157293] pci 0000:00:1d.3: reg 0x20: [io 0xbf20-0xbf3f] [ 0.157521] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320 [ 0.157553] pci 0000:00:1d.7: reg 0x10: [mem 0xb0000000-0xb00003ff] [ 0.157671] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.157859] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.158129] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100 [ 0.158272] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.158285] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.158301] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO [ 0.158313] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0900-097f [ 0.158501] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a [ 0.158529] pci 0000:00:1f.1: reg 0x10: [io 0x01f0-0x01f7] [ 0.158543] pci 0000:00:1f.1: reg 0x14: [io 0x03f4-0x03f7] [ 0.158558] pci 0000:00:1f.1: reg 0x18: [io 0x0170-0x0177] [ 0.158572] pci 0000:00:1f.1: reg 0x1c: [io 0x0374-0x0377] [ 0.158586] pci 0000:00:1f.1: reg 0x20: [io 0xbfa0-0xbfaf] [ 0.158616] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.158625] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.158634] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.158642] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.158925] pci 0000:00:1c.0: PCI bridge to [bus 0b] [ 0.159100] acpiphp: Slot [1] registered [ 0.159115] pci 0000:00:1c.3: PCI bridge to [bus 0c-0d] [ 0.159126] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.159133] pci 0000:00:1c.3: bridge window [mem 0xdfc00000-0xdfdfffff] [ 0.159142] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.159174] pci_bus 0000:02: extended config space not accessible [ 0.159268] pci 0000:02:00.0: [14e4:170c] type 00 class 0x020000 [ 0.159294] pci 0000:02:00.0: reg 0x10: [mem 0xdfbfc000-0xdfbfdfff] [ 0.159407] pci 0000:02:00.0: supports D1 D2 [ 0.159410] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.159514] pci 0000:02:03.0: [14e4:4318] type 00 class 0x028000 [ 0.159539] pci 0000:02:03.0: reg 0x10: [mem 0xdfbfe000-0xdfbfffff] [ 0.159758] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode) [ 0.159774] pci 0000:00:1e.0: bridge window [mem 0xdfb00000-0xdfbfffff] [ 0.159784] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.159788] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.159816] pci_bus 0000:00: on NUMA node 0 [ 0.160297] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.160493] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 0.160686] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11) [ 0.160879] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11) [ 0.161046] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.161221] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.161396] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.161834] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.161845] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.161860] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.161866] vgaarb: loaded [ 0.162370] SCSI subsystem initialized [ 0.162482] libata version 3.00 loaded. [ 0.162531] ACPI: bus type USB registered [ 0.162577] usbcore: registered new interface driver usbfs [ 0.162602] usbcore: registered new interface driver hub [ 0.162633] usbcore: registered new device driver usb [ 0.162693] pps_core: LinuxPPS API ver. 1 registered [ 0.162700] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.162715] PTP clock support registered [ 0.162800] EDAC MC: Ver: 3.0.0 [ 0.163126] PCI: Using ACPI for IRQ routing [ 0.174619] PCI: pci_cache_line_size set to 64 bytes [ 0.174686] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.174690] e820: reserve RAM buffer [mem 0x4f7d3800-0x4fffffff] [ 0.174938] NetLabel: Initializing [ 0.174946] NetLabel: domain hash size = 128 [ 0.174952] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.174998] NetLabel: unlabeled traffic allowed by default [ 0.176833] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.176860] hpet clockevent registered [ 0.176874] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.176888] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.176900] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.178987] clocksource: Switched to clocksource tsc-early [ 0.210484] VFS: Disk quotas dquot_6.6.0 [ 0.210538] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.210822] AppArmor: AppArmor Filesystem Enabled [ 0.210909] pnp: PnP ACPI init [ 0.225877] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved [ 0.225890] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved [ 0.225900] system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.225910] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.225919] system 00:00: [mem 0x00100000-0x4f7d37ff] could not be reserved [ 0.225929] system 00:00: [mem 0x4f7d3800-0x4f7fffff] has been reserved [ 0.225938] system 00:00: [mem 0x4f800000-0x4fffffff] has been reserved [ 0.225948] system 00:00: [mem 0xfeda0000-0xfedfffff] has been reserved [ 0.225958] system 00:00: [mem 0xffb00000-0xffffffff] has been reserved [ 0.225967] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved [ 0.225977] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.225986] system 00:00: [mem 0xfed20000-0xfed9ffff] has been reserved [ 0.225996] system 00:00: [mem 0xf0000000-0xf0003fff] has been reserved [ 0.226005] system 00:00: [mem 0xf0004000-0xf0004fff] has been reserved [ 0.226014] system 00:00: [mem 0xf0005000-0xf0005fff] has been reserved [ 0.226024] system 00:00: [mem 0xf0006000-0xf0006fff] has been reserved [ 0.226033] system 00:00: [mem 0xf0008000-0xf000bfff] has been reserved [ 0.226043] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.226061] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.226126] pnp 00:01: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.226139] pnp 00:01: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.226199] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.226214] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.226270] pnp 00:02: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.226283] pnp 00:02: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.226295] pnp 00:02: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.226348] system 00:02: [io 0xf400-0xf4fe] has been reserved [ 0.226358] system 00:02: [io 0x1080-0x10bf] has been reserved [ 0.226367] system 00:02: [io 0x10c0-0x10df] has been reserved [ 0.226376] system 00:02: [io 0x10e0-0x10ff] has been reserved [ 0.226390] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.226479] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.226553] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.226621] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.226717] system 00:06: [io 0x0900-0x090f] has been reserved [ 0.226728] system 00:06: [io 0x0910-0x091f] has been reserved [ 0.226737] system 00:06: [io 0x0920-0x092f] has been reserved [ 0.226746] system 00:06: [io 0x0930-0x093f] has been reserved [ 0.226755] system 00:06: [io 0x0940-0x097f] has been reserved [ 0.226769] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.227280] pnp: PnP ACPI: found 7 devices [ 0.227290] PnPBIOS: Disabled [ 0.265247] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.265292] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000 [ 0.265299] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align 100000 [ 0.265304] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000 add_align 100000 [ 0.265349] pci 0000:00:1c.0: BAR 14: assigned [mem 0x50000000-0x501fffff] [ 0.265361] pci 0000:00:1c.0: BAR 15: assigned [mem 0x50200000-0x503fffff 64bit pref] [ 0.265374] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.265385] pci 0000:00:1c.0: PCI bridge to [bus 0b] [ 0.265394] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.265408] pci 0000:00:1c.0: bridge window [mem 0x50000000-0x501fffff] [ 0.265420] pci 0000:00:1c.0: bridge window [mem 0x50200000-0x503fffff 64bit pref] [ 0.265437] pci 0000:00:1c.3: PCI bridge to [bus 0c-0d] [ 0.265446] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.265459] pci 0000:00:1c.3: bridge window [mem 0xdfc00000-0xdfdfffff] [ 0.265471] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.265489] pci 0000:00:1e.0: PCI bridge to [bus 02] [ 0.265502] pci 0000:00:1e.0: bridge window [mem 0xdfb00000-0xdfbfffff] [ 0.265521] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.265524] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.265527] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff] [ 0.265531] pci_bus 0000:0b: resource 1 [mem 0x50000000-0x501fffff] [ 0.265534] pci_bus 0000:0b: resource 2 [mem 0x50200000-0x503fffff 64bit pref] [ 0.265538] pci_bus 0000:0c: resource 0 [io 0xd000-0xdfff] [ 0.265541] pci_bus 0000:0c: resource 1 [mem 0xdfc00000-0xdfdfffff] [ 0.265544] pci_bus 0000:0c: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.265547] pci_bus 0000:02: resource 1 [mem 0xdfb00000-0xdfbfffff] [ 0.265551] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 0.265554] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff] [ 0.265753] NET: Registered protocol family 2 [ 0.266158] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.266181] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.266221] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.266287] TCP: Hash tables configured (established 8192 bind 8192) [ 0.266383] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.266406] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.266512] NET: Registered protocol family 1 [ 0.266529] NET: Registered protocol family 44 [ 0.266559] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.269426] PCI: CLS 64 bytes, default 64 [ 0.269536] Unpacking initramfs... [ 2.020117] Freeing initrd memory: 48528K [ 2.020621] Scanning for low memory corruption every 60 seconds [ 2.021972] Initialise system trusted keyrings [ 2.022003] Key type blacklist registered [ 2.022119] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 2.025902] zbud: loaded [ 2.026780] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.027279] fuse init (API version 7.27) [ 2.027438] pstore: using deflate compression [ 2.030116] Key type asymmetric registered [ 2.030129] Asymmetric key parser 'x509' registered [ 2.030162] bounce: pool size: 64 pages [ 2.030208] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 2.030295] io scheduler noop registered [ 2.030303] io scheduler deadline registered [ 2.030435] io scheduler cfq registered (default) [ 2.031579] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.031718] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 2.031726] vesafb: scrolling: redraw [ 2.031734] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.031774] vesafb: framebuffer at 0xc0000000, mapped to 0x(ptrval), using 3072k, total 3072k [ 2.071868] Console: switching to colour frame buffer device 128x48 [ 2.112136] fb0: VESA VGA frame buffer device [ 2.112503] intel_idle: does not run on family 6 model 13 [ 2.112990] ACPI: AC Adapter [AC] (on-line) [ 2.113427] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 2.114078] ACPI: Lid Switch [LID] [ 2.114415] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 2.115059] ACPI: Power Button [PBTN] [ 2.115418] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 2.116175] ACPI: Sleep Button [SBTN] [ 2.116647] tsc: Marking TSC unstable due to TSC halts in idle [ 2.117133] clocksource: Switched to clocksource hpet [ 2.124274] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.124706] ACPI: Thermal Zone [THM] (57 C) [ 2.132115] isapnp: Scanning for PnP cards... [ 2.457861] isapnp: No Plug & Play device found [ 2.458426] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.463344] Linux agpgart interface v0.103 [ 2.469941] ACPI: Battery Slot [BAT0] (battery present) [ 2.472274] loop: module loaded [ 2.473219] ata_piix 0000:00:1f.1: version 2.13 [ 2.474875] scsi host0: ata_piix [ 2.475368] scsi host1: ata_piix [ 2.475695] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14 [ 2.476266] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15 [ 2.477474] libphy: Fixed MDIO Bus: probed [ 2.493864] tun: Universal TUN/TAP device driver, 1.6 [ 2.510433] ata2: port disabled--ignoring [ 2.510625] PPP generic driver version 2.4.2 [ 2.527145] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.543786] ehci-pci: EHCI PCI platform driver [ 2.560735] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 2.577284] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.593900] ehci-pci 0000:00:1d.7: debug port 1 [ 2.614181] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 2.614214] ehci-pci 0000:00:1d.7: irq 16, io mem 0xb0000000 [ 2.642083] ata1.00: ATA-6: IC25N080ATMR04-0, MO4OAD4A, max UDMA/100 [ 2.658590] ata1.00: 156301488 sectors, multi 8: LBA [ 2.675072] ata1.01: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-4244N, B103, max UDMA/33 [ 2.692054] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.709164] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 2.726316] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.743318] usb usb1: Product: EHCI Host Controller [ 2.760274] usb usb1: Manufacturer: Linux 4.18.0-rc8-62dae6e374af ehci_hcd [ 2.777593] usb usb1: SerialNumber: 0000:00:1d.7 [ 2.795379] hub 1-0:1.0: USB hub found [ 2.812891] hub 1-0:1.0: 8 ports detected [ 2.830537] ehci-platform: EHCI generic platform driver [ 2.847943] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.865499] ohci-pci: OHCI PCI platform driver [ 2.882599] ohci-platform: OHCI generic platform driver [ 2.899450] uhci_hcd: USB Universal Host Controller Interface driver [ 2.916741] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.933888] scsi 0:0:0:0: Direct-Access ATA IC25N080ATMR04-0 AD4A PQ: 0 ANSI: 5 [ 2.951083] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.968544] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.985710] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.002454] uhci_hcd 0000:00:1d.0: detected 2 ports [ 3.020669] sd 0:0:0:0: [sda] Write Protect is off [ 3.036892] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.037317] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80 [ 3.053646] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 3.070172] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.086669] usb usb2: Product: UHCI Host Controller [ 3.103009] usb usb2: Manufacturer: Linux 4.18.0-rc8-62dae6e374af uhci_hcd [ 3.119534] usb usb2: SerialNumber: 0000:00:1d.0 [ 3.136458] hub 2-0:1.0: USB hub found [ 3.152945] scsi 0:0:1:0: CD-ROM HL-DT-ST CDRW/DVD GCC4244 B103 PQ: 0 ANSI: 5 [ 3.169781] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.186841] hub 2-0:1.0: 2 ports detected [ 3.204474] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.221558] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 3.238904] uhci_hcd 0000:00:1d.1: detected 2 ports [ 3.256365] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60 [ 3.273759] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 3.291693] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.309520] usb usb3: Product: UHCI Host Controller [ 3.327280] usb usb3: Manufacturer: Linux 4.18.0-rc8-62dae6e374af uhci_hcd [ 3.345246] usb usb3: SerialNumber: 0000:00:1d.1 [ 3.363380] hub 3-0:1.0: USB hub found [ 3.381011] hub 3-0:1.0: 2 ports detected [ 3.399335] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.416990] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 3.434746] uhci_hcd 0000:00:1d.2: detected 2 ports [ 3.452449] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40 [ 3.470088] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 3.487997] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.505804] usb usb4: Product: UHCI Host Controller [ 3.523388] usb usb4: Manufacturer: Linux 4.18.0-rc8-62dae6e374af uhci_hcd [ 3.540966] usb usb4: SerialNumber: 0000:00:1d.2 [ 3.558694] hub 4-0:1.0: USB hub found [ 3.575932] hub 4-0:1.0: 2 ports detected [ 3.593607] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.610719] sr 0:0:1:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 3.628203] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.646414] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 3.664394] uhci_hcd 0000:00:1d.3: detected 2 ports [ 3.682512] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 3.682619] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 3.700392] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000bf20 [ 3.718669] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 3.736851] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.754959] usb usb5: Product: UHCI Host Controller [ 3.772788] usb usb5: Manufacturer: Linux 4.18.0-rc8-62dae6e374af uhci_hcd [ 3.790654] usb usb5: SerialNumber: 0000:00:1d.3 [ 3.808569] hub 5-0:1.0: USB hub found [ 3.825951] hub 5-0:1.0: 2 ports detected [ 3.843645] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.862040] i8042: Warning: Keylock active [ 3.880764] usb 3-1: new low-speed USB device number 2 using uhci_hcd [ 3.898682] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.916197] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 > [ 3.933796] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.952511] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.970168] mousedev: PS/2 mouse device common for all mice [ 3.988037] rtc_cmos 00:05: RTC can wake from S4 [ 4.005709] rtc_cmos 00:05: registered as rtc0 [ 4.022765] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.039888] i2c /dev entries driver [ 4.056996] device-mapper: uevent: version 1.0.3 [ 4.074090] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 4.091526] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 4.109312] platform eisa.0: Probing EISA bus 0 [ 4.126941] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 4.144445] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 4.161834] platform eisa.0: EISA: Detected 0 cards [ 4.178780] cpufreq_nforce2: No nForce2 chipset [ 4.195680] ledtrig-cpu: registered to indicate activity on CPUs [ 4.213311] NET: Registered protocol family 10 [ 4.238132] Segment Routing with IPv6 [ 4.255350] NET: Registered protocol family 17 [ 4.272517] Key type dns_resolver registered [ 4.289919] microcode: sig=0x6d8, pf=0x20, revision=0x20 [ 4.307120] usb 3-1: New USB device found, idVendor=046d, idProduct=c00e, bcdDevice=11.10 [ 4.324495] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.341789] usb 3-1: Product: USB-PS/2 Optical Mouse [ 4.358910] usb 3-1: Manufacturer: Logitech [ 4.375946] microcode: Microcode Update Driver: v2.2. [ 4.375955] Using IPI No-Shortcut mode [ 4.410029] registered taskstats version 1 [ 4.427052] Loading compiled-in X.509 certificates [ 4.455046] Loaded X.509 cert 'Build time autogenerated kernel key: 6486fd9771e60e346968032bd86bded8d080e25d' [ 4.472682] zswap: loaded using pool lzo/zbud [ 4.496785] Key type big_key registered [ 4.513910] Key type trusted registered [ 4.534126] Key type encrypted registered [ 4.550885] AppArmor: AppArmor sha1 policy hashing enabled [ 4.567706] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 4.584411] ima: Allocated hash algorithm: sha1 [ 4.600976] evm: Initialising EVM extended attributes: [ 4.617460] evm: security.selinux [ 4.633714] evm: security.SMACK64 [ 4.649709] evm: security.SMACK64EXEC [ 4.665530] evm: security.SMACK64TRANSMUTE [ 4.681345] evm: security.SMACK64MMAP [ 4.696713] evm: security.apparmor [ 4.711718] evm: security.ima [ 4.726394] evm: security.capability [ 4.740842] evm: HMAC attrs: 0x1 [ 4.755505] Magic number: 14:360:797 [ 4.769802] rtc_cmos 00:05: setting system clock to 2018-08-16 18:46:34 UTC (1534445194) [ 4.784627] Unstable clock detected, switching default tracing clock to "global" If you want to keep using the local clock, then add: "trace_clock=local" on the kernel command line [ 4.846675] Freeing unused kernel memory: 1088K [ 4.868183] Write protecting the kernel text: 9140k [ 4.882665] Write protecting the kernel read-only data: 3536k [ 4.896858] NX-protecting the kernel data: 7244k [ 4.911400] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 5.231771] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 5.354441] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5 [ 5.386831] hidraw: raw HID events driver (C) Jiri Kosina [ 5.448523] ssb: Found chip with id 0x4318, rev 0x02 and package 0x02 [ 5.463478] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243) [ 5.463486] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243) [ 5.463493] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243) [ 5.463500] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243) [ 5.481527] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 5.599434] usbcore: registered new interface driver usbhid [ 5.615452] usbhid: USB HID core driver [ 5.632183] ssb: Sonics Silicon Backplane found on PCI device 0000:02:03.0 [ 5.760347] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00 [ 5.776272] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) [ 5.776279] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) [ 5.776286] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) [ 5.784121] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:046D:C00E.0001/input/input7 [ 5.909323] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1/input0 [ 5.974013] [drm:i915_driver_load [i915]] No PCH found. [ 5.974092] [drm:intel_wopcm_init_early [i915]] WOPCM size: 1024KiB [ 5.974171] [drm:intel_uc_init_early [i915]] enable_guc=0 (submission:no huc:no) [ 5.974248] [drm:intel_uc_init_early [i915]] guc_log_level=0 (enabled:no, verbose:no, verbosity:0) [ 5.974319] [drm:intel_power_domains_init [i915]] Allowed DC state mask 00 [ 5.974429] [drm:i915_driver_load [i915]] ppgtt mode: 0 [ 5.974436] pci 0000:00:00.0: Intel 915GM Chipset [ 5.992421] ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0 [ 6.010879] pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable [ 6.029548] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0 [ 6.047839] pci 0000:00:00.0: detected 8192K stolen memory [ 6.065676] random: fast init done [ 6.084499] [drm:i915_ggtt_probe_hw [i915]] GGTT size = 256M [ 6.084573] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M [ 6.084645] [drm:i915_ggtt_probe_hw [i915]] DSM size = 8M [ 6.084650] checking generic (c0000000 300000) vs hw (c0000000 10000000) [ 6.084652] fb: switching to inteldrmfb from VESA VGA [ 6.103053] Console: switching to colour dummy device 80x25 [ 6.103577] [drm] Replacing VGA console driver [ 6.104041] [drm:i915_adjust_stolen [i915]] GTT within stolen memory at [mem 0x4ffc0000-0x4fffffff] [ 6.104162] [drm:i915_adjust_stolen [i915]] Stolen memory adjusted to [mem 0x4f800000-0x4ffc0000] [ 6.104259] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 7936K, usable: 7936K [ 6.104358] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x0 [ 6.104434] [drm:intel_opregion_setup [i915]] ACPI OpRegion not supported! [ 6.104438] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.104452] [drm] Driver supports precise vblank timestamp query. [ 6.104533] [drm:intel_bios_init [i915]] Set default to SSC at 100000 kHz [ 6.105099] [drm:intel_bios_init [i915]] Found valid VBT in PCI ROM [ 6.105179] [drm:intel_bios_init [i915]] VBT signature "$VBT ALVISO ", BDB version 122 [ 6.105259] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 96000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 6.105337] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 [ 6.105744] [drm:intel_opregion_get_panel_type [i915]] Failed to get panel details from OpRegion (-19) [ 6.105860] [drm:intel_bios_init [i915]] Panel type: 2 (VBT) [ 6.105936] [drm:intel_bios_init [i915]] DRRS supported mode is static [ 6.106155] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables: [ 6.106254] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1280x800" 0 71150 1280 1328 1360 1440 800 802 808 823 0x8 0xa [ 6.106332] [drm:intel_bios_init [i915]] VBT initial LVDS value 40300300 [ 6.106419] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 220 Hz, active high, min brightness 0, level 0, controller 0 [ 6.106638] [drm:intel_bios_init [i915]] Found SDVO panel mode in BIOS VBT tables: [ 6.106707] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 6.106789] [drm:intel_bios_init [i915]] DRRS State Enabled:0 [ 6.106884] [drm:intel_bios_init [i915]] No PSR BDB found. [ 6.106961] [drm:intel_bios_init [i915]] No SDVO device info is found in VBT [ 6.107179] [drm:intel_dsm_detect [i915]] no _DSM method for intel device [ 6.107444] [drm:intel_power_well_enable [i915]] enabling always-on [ 6.112249] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 [ 6.112329] [drm:intel_modeset_init [i915]] 2 display pipes available. [ 6.112690] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 190000 kHz, VCO 0 kHz, ref 0 kHz, bypass 0 kHz, voltage level 0 [ 6.112768] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 190000 kHz [ 6.112844] [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 342000 kHz [ 6.112853] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 6.113282] [drm:intel_lvds_init [i915]] LVDS PPS:t1+t2 300 t3 450 t4 8000 t5 4000 tx 4000 divider 10649 port 0 powerdown_on_reset 0 [ 6.117043] b44 ssb1:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:14:22:af:83:9b [ 6.161617] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 6.161651] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 6.161707] [drm:do_detailed_mode [drm]] composite sync not supported [ 6.161758] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 6.161909] [drm:intel_lvds_init [i915]] using preferred mode from EDID: [ 6.161940] [drm:drm_mode_debug_printmodeline [drm]] Modeline 41:"1280x800" 60 71150 1280 1328 1360 1440 800 802 808 823 0x48 0xa [ 6.162025] [drm:intel_panel_setup_backlight [i915]] Connector LVDS-1 backlight initialized, disabled, brightness 0/3856875 [ 6.162104] [drm:intel_lvds_init [i915]] detected single-link lvds configuration [ 6.162241] [drm:intel_set_plane_visible [i915]] pipe A active planes 0x1 [ 6.162319] [drm:intel_set_plane_visible [i915]] pipe A active planes 0x1 [ 6.162397] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:32:pipe A] hw state readout: disabled [ 6.162482] [drm:intel_set_plane_visible [i915]] pipe B active planes 0x0 [ 6.162559] [drm:intel_set_plane_visible [i915]] pipe B active planes 0x0 [ 6.162636] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:37:pipe B] hw state readout: enabled [ 6.162716] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:39:LVDS] hw state readout: enabled, pipe B [ 6.162793] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:46:CRT] hw state readout: disabled, pipe B [ 6.162887] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:48:TV] hw state readout: disabled, pipe A [ 6.163093] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:38:LVDS-1] hw state readout: enabled [ 6.163241] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:45:VGA-1] hw state readout: disabled [ 6.163318] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:47:SVIDEO-1] hw state readout: disabled [ 6.163402] [drm:intel_modeset_setup_hw_state [i915]] plane B attached to the wrong pipe, disabling plane [ 6.163479] [drm:intel_set_plane_visible [i915]] pipe A active planes 0x0 [ 6.163550] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was disabled) [ 6.163630] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][setup_hw_state] [ 6.163707] [drm:intel_dump_pipe_config [i915]] output_types: (0x0) [ 6.163784] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 0, dithering: 0 [ 6.163860] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 6.163936] [drm:intel_dump_pipe_config [i915]] requested mode: [ 6.163968] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 6.164044] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 6.164095] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 6.164174] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 6.164251] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 6.164328] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 6.164405] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 6.164482] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 6.164558] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 6.164635] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane B] disabled, scaler_id = 0 [ 6.164712] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0 [ 6.164799] [drm:intel_dump_pipe_config [i915]] [CRTC:37:pipe B][setup_hw_state] [ 6.164876] [drm:intel_dump_pipe_config [i915]] output_types: LVDS (0x10) [ 6.164952] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0 [ 6.165029] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 6.165104] [drm:intel_dump_pipe_config [i915]] requested mode: [ 6.165135] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1280x800" 60 71314 1024 1328 1360 1440 768 802 808 823 0x40 0xa [ 6.165210] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 6.165241] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1280x800" 60 71314 1280 1328 1360 1440 800 802 808 823 0x40 0xa [ 6.165319] [drm:intel_dump_pipe_config [i915]] crtc timings: 71314 1280 1328 1360 1440 800 802 808 823, type: 0x40 flags: 0xa [ 6.165396] [drm:intel_dump_pipe_config [i915]] port clock: 71314, pipe src size: 1024x768, pixel rate 71314 [ 6.165473] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x80006668, ratios: 0x00000000, lvds border: 0x00000000 [ 6.165549] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 6.165627] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x98026000, dpll_md: 0x0, fp0: 0x31107, fp1: 0x31108 [ 6.165702] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 6.165779] [drm:intel_dump_pipe_config [i915]] [PLANE:33:plane A] disabled, scaler_id = 0 [ 6.165856] [drm:intel_dump_pipe_config [i915]] [PLANE:35:cursor B] disabled, scaler_id = 0 [ 6.168521] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [1000, 10000000] [ 6.171888] [drm:intel_ctx_workarounds_init [i915]] Number of context specific w/a: 0 [ 6.172027] [drm:i915_gem_contexts_init [i915]] fake context support initialized [ 6.172171] [drm] RC6 disabled, disabling runtime PM support [ 6.172298] [drm] initialized overlay support [ 6.172386] [drm:intel_fbdev_init [i915]] pipe A not active or no fb, skipping [ 6.172462] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping [ 6.172538] [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config [ 6.174436] [drm:intel_backlight_device_register [i915]] Connector LVDS-1 backlight sysfs interface registered [ 6.175098] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0 [ 6.175284] i915 device info: pciid=0x2592 rev=0x03 platform=I915GM gen=3 [ 6.175286] i915 device info: is_mobile: yes [ 6.175288] i915 device info: is_lp: no [ 6.175290] i915 device info: is_alpha_support: no [ 6.175292] i915 device info: has_64bit_reloc: no [ 6.175294] i915 device info: has_aliasing_ppgtt: no [ 6.175296] i915 device info: has_csr: no [ 6.175298] i915 device info: has_ddi: no [ 6.175300] i915 device info: has_dp_mst: no [ 6.175302] i915 device info: has_reset_engine: no [ 6.175304] i915 device info: has_fbc: yes [ 6.175306] i915 device info: has_fpga_dbg: no [ 6.175308] i915 device info: has_full_ppgtt: no [ 6.175310] i915 device info: has_full_48bit_ppgtt: no [ 6.175312] i915 device info: has_gmch_display: yes [ 6.175313] i915 device info: has_guc: no [ 6.175315] i915 device info: has_guc_ct: no [ 6.175317] i915 device info: has_hotplug: no [ 6.175319] i915 device info: has_l3_dpf: no [ 6.175321] i915 device info: has_llc: no [ 6.175323] i915 device info: has_logical_ring_contexts: no [ 6.175325] i915 device info: has_logical_ring_elsq: no [ 6.175327] i915 device info: has_logical_ring_preemption: no [ 6.175329] i915 device info: has_overlay: yes [ 6.175331] i915 device info: has_pooled_eu: no [ 6.175333] i915 device info: has_psr: no [ 6.175335] i915 device info: has_rc6: no [ 6.175337] i915 device info: has_rc6p: no [ 6.175338] i915 device info: has_runtime_pm: no [ 6.175340] i915 device info: has_snoop: yes [ 6.175342] i915 device info: has_coherent_ggtt: yes [ 6.175344] i915 device info: unfenced_needs_alignment: yes [ 6.175346] i915 device info: cursor_needs_physical: yes [ 6.175348] i915 device info: hws_needs_physical: yes [ 6.175350] i915 device info: overlay_needs_physical: yes [ 6.175352] i915 device info: supports_tv: yes [ 6.175354] i915 device info: has_ipc: no [ 6.175357] i915 device info: slice total: 0, mask=0000 [ 6.175358] i915 device info: subslice total: 0 [ 6.175360] i915 device info: EU total: 0 [ 6.175362] i915 device info: EU per subslice: 0 [ 6.175364] i915 device info: has slice power gating: no [ 6.175366] i915 device info: has subslice power gating: no [ 6.175368] i915 device info: has EU power gating: no [ 6.175370] i915 device info: CS timestamp frequency: 0 kHz [ 6.175406] [drm:drm_setup_crtcs [drm_kms_helper]] [ 6.175422] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:38:LVDS-1] [ 6.175438] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:38:LVDS-1] status updated from unknown to connected [ 6.175493] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 6.175523] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 6.175576] [drm:do_detailed_mode [drm]] composite sync not supported [ 6.175645] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:38:LVDS-1] probed modes : [ 6.175676] [drm:drm_mode_debug_printmodeline [drm]] Modeline 41:"1280x800" 60 71150 1280 1328 1360 1440 800 802 808 823 0x48 0xa [ 6.175690] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:45:VGA-1] [ 6.175786] [drm:intel_crt_detect [i915]] [CONNECTOR:45:VGA-1] force=1 [ 6.176034] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 6.176139] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry [ 6.176393] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 6.176427] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 6.176504] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 6.176595] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 6.177607] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 6.177683] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 6.177759] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] [ 6.177837] [drm:intel_get_load_detect_pipe [i915]] [CONNECTOR:45:VGA-1], [ENCODER:46:CRT] [ 6.177945] [drm:intel_atomic_check [i915]] [CONNECTOR:45:VGA-1] checking for sink bpp constrains [ 6.178024] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 24, dithering: 0 [ 6.178101] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset] [ 6.178179] [drm:intel_dump_pipe_config [i915]] output_types: ANALOG (0x2) [ 6.178256] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 [ 6.178333] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 6.178409] [drm:intel_dump_pipe_config [i915]] requested mode: [ 6.178439] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa [ 6.178516] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 6.178546] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa [ 6.178624] [drm:intel_dump_pipe_config [i915]] crtc timings: 31500 640 664 704 832 480 489 491 520, type: 0x10 flags: 0xa [ 6.178702] [drm:intel_dump_pipe_config [i915]] port clock: 31500, pipe src size: 640x480, pixel rate 31500 [ 6.178779] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 6.178855] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 6.178933] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 6.179009] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 6.179087] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane B] disabled, scaler_id = 0 [ 6.179164] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0 [ 6.179740] [drm:intel_atomic_commit_tail [i915]] [ENCODER:39:LVDS] [ 6.179817] [drm:intel_atomic_commit_tail [i915]] [ENCODER:46:CRT] [ 6.179906] [drm:intel_atomic_commit_tail [i915]] [ENCODER:48:TV] [ 6.180635] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) A: 28 [ 6.180705] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) B: 31 [ 6.180774] [drm:i9xx_update_wm [i915]] FIFO watermarks - A: 26, B: 29 [ 6.180853] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was disabled) [ 6.180922] [drm:i9xx_update_wm [i915]] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1 [ 6.180999] [drm:intel_enable_pipe [i915]] enabling pipe A [ 6.196661] [drm:verify_connector_state.isra.121 [i915]] [CONNECTOR:45:VGA-1] [ 6.197383] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A] [ 6.209676] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 6.209753] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry [ 6.210012] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 6.210055] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 6.210132] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 6.210208] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 6.210785] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 6.210861] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 6.210936] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] [ 6.211013] [drm:intel_crt_detect [i915]] starting load-detect on CRT [ 6.223760] [drm:intel_release_load_detect_pipe [i915]] [CONNECTOR:45:VGA-1], [ENCODER:46:CRT] [ 6.223894] [drm:intel_disable_pipe [i915]] disabling pipe A [ 6.252166] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) A: 28 [ 6.252246] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) B: 31 [ 6.252315] [drm:i9xx_update_wm [i915]] FIFO watermarks - A: 26, B: 29 [ 6.252386] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was disabled) [ 6.252455] [drm:i9xx_update_wm [i915]] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1 [ 6.252539] [drm:intel_atomic_commit_tail [i915]] [ENCODER:39:LVDS] [ 6.252616] [drm:intel_atomic_commit_tail [i915]] [ENCODER:46:CRT] [ 6.252693] [drm:intel_atomic_commit_tail [i915]] [ENCODER:48:TV] [ 6.252770] [drm:verify_connector_state.isra.121 [i915]] [CONNECTOR:45:VGA-1] [ 6.252860] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A] [ 6.252902] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:45:VGA-1] status updated from unknown to disconnected [ 6.252916] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:45:VGA-1] disconnected [ 6.252934] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:SVIDEO-1] [ 6.253013] [drm:intel_tv_detect [i915]] [CONNECTOR:47:SVIDEO-1] force=1 [ 6.253090] [drm:intel_get_load_detect_pipe [i915]] [CONNECTOR:47:SVIDEO-1], [ENCODER:48:TV] [ 6.253198] [drm:intel_atomic_check [i915]] [CONNECTOR:47:SVIDEO-1] checking for sink bpp constrains [ 6.253276] [drm:intel_tv_compute_config [i915]] forcing bpc to 8 for TV [ 6.253354] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 24, dithering: 0 [ 6.253430] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset] [ 6.253508] [drm:intel_dump_pipe_config [i915]] output_types: TVOUT (0x20) [ 6.253585] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 [ 6.253661] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 6.253738] [drm:intel_dump_pipe_config [i915]] requested mode: [ 6.253805] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0 [ 6.253881] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 6.253911] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0 [ 6.253990] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0 [ 6.254067] [drm:intel_dump_pipe_config [i915]] port clock: 108000, pipe src size: 1280x1024, pixel rate 108000 [ 6.254144] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 6.254221] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 6.254299] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 6.254375] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 6.254452] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane B] disabled, scaler_id = 0 [ 6.254529] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0 [ 6.254864] [drm:intel_atomic_commit_tail [i915]] [ENCODER:39:LVDS] [ 6.254941] [drm:intel_atomic_commit_tail [i915]] [ENCODER:46:CRT] [ 6.255152] [drm:intel_atomic_commit_tail [i915]] [ENCODER:48:TV] [ 6.256806] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) A: 28 [ 6.256877] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) B: 31 [ 6.256946] [drm:i9xx_update_wm [i915]] FIFO watermarks - A: 26, B: 29 [ 6.257017] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was disabled) [ 6.257086] [drm:i9xx_update_wm [i915]] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1 [ 6.257163] [drm:intel_enable_pipe [i915]] enabling pipe A [ 6.295529] [drm:verify_connector_state.isra.121 [i915]] [CONNECTOR:47:SVIDEO-1] [ 6.295617] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A] [ 6.305613] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x200000/0x0/0x0, board id: 0, fw id: 118800 [ 6.341783] [drm:intel_tv_detect [i915]] TV detected: c0c07, 7f0000aa [ 6.341861] [drm:intel_tv_detect [i915]] Unrecognised TV connection [ 6.342331] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 6.361899] [drm:intel_release_load_detect_pipe [i915]] [CONNECTOR:47:SVIDEO-1], [ENCODER:48:TV] [ 6.362034] [drm:intel_disable_pipe [i915]] disabling pipe A [ 6.408216] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) A: 28 [ 6.408288] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) B: 31 [ 6.408357] [drm:i9xx_update_wm [i915]] FIFO watermarks - A: 26, B: 29 [ 6.408428] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was disabled) [ 6.408607] [drm:i9xx_update_wm [i915]] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1 [ 6.408692] [drm:intel_atomic_commit_tail [i915]] [ENCODER:39:LVDS] [ 6.408769] [drm:intel_atomic_commit_tail [i915]] [ENCODER:46:CRT] [ 6.408845] [drm:intel_atomic_commit_tail [i915]] [ENCODER:48:TV] [ 6.408923] [drm:verify_connector_state.isra.121 [i915]] [CONNECTOR:47:SVIDEO-1] [ 6.409014] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A] [ 6.409060] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:SVIDEO-1] status updated from unknown to disconnected [ 6.409073] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:SVIDEO-1] disconnected [ 6.409092] [drm:drm_setup_crtcs [drm_kms_helper]] connector 38 enabled? yes [ 6.409106] [drm:drm_setup_crtcs [drm_kms_helper]] connector 45 enabled? no [ 6.409119] [drm:drm_setup_crtcs [drm_kms_helper]] connector 47 enabled? no [ 6.409201] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 6.409216] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 38 [ 6.409231] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 38 0 [ 6.409245] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1280x800 [ 6.409259] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 4096x4096 config [ 6.409277] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1280x800 set on crtc 37 (0,0) [ 6.409360] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one [ 6.421558] [drm:intelfb_create [i915]] allocated 1280x800 fb: 0x00022000 [ 6.421983] fbcon: inteldrmfb (fb0) is primary device [ 6.422380] [drm:intel_atomic_check [i915]] [CONNECTOR:38:LVDS-1] checking for sink bpp constrains [ 6.422459] [drm:intel_lvds_compute_config [i915]] forcing display bpp (was 24) to LVDS (18) [ 6.422537] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 6.422614] [drm:intel_dump_pipe_config [i915]] [CRTC:37:pipe B][modeset] [ 6.422691] [drm:intel_dump_pipe_config [i915]] output_types: LVDS (0x10) [ 6.422768] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 18, dithering: 1 [ 6.422844] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 6.422920] [drm:intel_dump_pipe_config [i915]] requested mode: [ 6.422989] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1280x800" 60 71150 1280 1328 1360 1440 800 802 808 823 0x48 0xa [ 6.423065] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 6.423095] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1280x800" 60 71150 1280 1328 1360 1440 800 802 808 823 0x48 0xa [ 6.423173] [drm:intel_dump_pipe_config [i915]] crtc timings: 71150 1280 1328 1360 1440 800 802 808 823, type: 0x48 flags: 0xa [ 6.423251] [drm:intel_dump_pipe_config [i915]] port clock: 71150, pipe src size: 1280x800, pixel rate 71150 [ 6.423328] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000 [ 6.423404] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 6.423482] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x98026000, dpll_md: 0x0, fp0: 0x31107, fp1: 0x31108 [ 6.423558] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 6.423635] [drm:intel_dump_pipe_config [i915]] [PLANE:33:plane A] disabled, scaler_id = 0 [ 6.423711] [drm:intel_dump_pipe_config [i915]] [PLANE:35:cursor B] disabled, scaler_id = 0 [ 6.423798] [drm:i9xx_crtc_compute_clock [i915]] using SSC reference clock of 96000 kHz [ 6.424176] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was disabled) [ 6.424259] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 6.870781] [drm:intel_disable_pipe [i915]] disabling pipe B [ 6.900210] [drm:i9xx_crtc_disable [i915]] disabling pfit, current: 0x80006668 [ 6.900285] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) A: 28 [ 6.900355] [drm:intel_calculate_wm [i915]] FIFO entries required for mode: 25 [ 6.900423] [drm:intel_calculate_wm [i915]] FIFO watermark level: 3 [ 6.900492] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) B: 31 [ 6.900561] [drm:i9xx_update_wm [i915]] FIFO watermarks - A: 8, B: 29 [ 6.900632] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was disabled) [ 6.900701] [drm:i9xx_update_wm [i915]] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 1 [ 6.900786] [drm:intel_atomic_commit_tail [i915]] [ENCODER:39:LVDS] [ 6.900863] [drm:intel_atomic_commit_tail [i915]] [ENCODER:46:CRT] [ 6.900939] [drm:intel_atomic_commit_tail [i915]] [ENCODER:48:TV] [ 6.901665] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) A: 28 [ 6.901733] [drm:intel_calculate_wm [i915]] FIFO entries required for mode: 25 [ 6.901801] [drm:intel_calculate_wm [i915]] FIFO watermark level: 3 [ 6.901869] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) B: 31 [ 6.901938] [drm:i9xx_update_wm [i915]] FIFO watermarks - A: 8, B: 29 [ 6.902007] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was disabled) [ 6.902076] [drm:i9xx_update_wm [i915]] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 1 [ 6.902282] [drm:intel_enable_pipe [i915]] enabling pipe B [ 7.738847] [drm:intel_panel_enable_backlight [i915]] pipe B [ 7.738927] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 3856875 [ 7.840187] [drm:verify_connector_state.isra.121 [i915]] [CONNECTOR:38:LVDS-1] [ 7.840274] [drm:intel_atomic_commit_tail [i915]] [CRTC:37:pipe B] [ 7.840322] Console: switching to colour frame buffer device 160x50 [ 8.059066] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 8.456486] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null) [ 8.543649] random: crng init done [ 10.301309] systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time. [ 10.877709] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 10.878181] systemd[1]: Detected architecture x86. [ 10.962632] systemd[1]: Set hostname to . [ 12.976503] systemd[1]: Created slice System Slice. [ 12.981732] systemd[1]: Listening on Syslog Socket. [ 12.989777] systemd[1]: Reached target Remote File Systems. [ 12.998000] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 13.006046] systemd[1]: Listening on udev Control Socket. [ 13.014133] systemd[1]: Listening on Journal Socket. [ 13.051301] systemd[1]: Starting Load Kernel Modules... [ 14.008433] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro [ 14.501274] systemd-journald[227]: Received request to flush runtime journal from PID 1 [ 16.352184] [drm:intel_crt_detect [i915]] [CONNECTOR:45:VGA-1] force=0 [ 16.352433] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 16.352489] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry [ 16.352719] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 16.352792] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 16.352850] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 16.352907] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 16.353488] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 16.353545] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 16.353601] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] [ 16.353659] [drm:intel_tv_detect [i915]] [CONNECTOR:47:SVIDEO-1] force=0 [ 16.353733] [drm:drm_fb_helper_hotplug_event.part.36 [drm_kms_helper]] [ 16.353747] [drm:drm_setup_crtcs [drm_kms_helper]] [ 16.353764] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:38:LVDS-1] [ 16.353796] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 16.353825] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 16.353887] [drm:do_detailed_mode [drm]] composite sync not supported [ 16.353955] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:38:LVDS-1] probed modes : [ 16.353986] [drm:drm_mode_debug_printmodeline [drm]] Modeline 41:"1280x800" 60 71150 1280 1328 1360 1440 800 802 808 823 0x48 0xa [ 16.354001] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:45:VGA-1] [ 16.354059] [drm:intel_crt_detect [i915]] [CONNECTOR:45:VGA-1] force=1 [ 16.354299] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 16.354355] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry [ 16.354583] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 16.354613] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 16.354670] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 16.354726] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 16.355302] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 16.355358] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 16.355414] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] [ 16.355473] [drm:intel_get_load_detect_pipe [i915]] [CONNECTOR:45:VGA-1], [ENCODER:46:CRT] [ 16.355572] [drm:intel_atomic_check [i915]] [CONNECTOR:45:VGA-1] checking for sink bpp constrains [ 16.355632] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 24, dithering: 0 [ 16.355690] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset] [ 16.355748] [drm:intel_dump_pipe_config [i915]] output_types: ANALOG (0x2) [ 16.355806] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 [ 16.355863] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 16.355920] [drm:intel_dump_pipe_config [i915]] requested mode: [ 16.355951] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa [ 16.356008] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 16.356071] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa [ 16.356130] [drm:intel_dump_pipe_config [i915]] crtc timings: 31500 640 664 704 832 480 489 491 520, type: 0x10 flags: 0xa [ 16.356188] [drm:intel_dump_pipe_config [i915]] port clock: 31500, pipe src size: 640x480, pixel rate 31500 [ 16.356246] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 16.356304] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 16.356499] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 16.356556] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 16.356614] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane B] disabled, scaler_id = 0 [ 16.356672] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0 [ 16.359780] [drm:intel_atomic_commit_tail [i915]] [ENCODER:39:LVDS] [ 16.359840] [drm:intel_atomic_commit_tail [i915]] [ENCODER:46:CRT] [ 16.359898] [drm:intel_atomic_commit_tail [i915]] [ENCODER:48:TV] [ 16.360603] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) A: 28 [ 16.360653] [drm:intel_calculate_wm [i915]] FIFO entries required for mode: 25 [ 16.360702] [drm:intel_calculate_wm [i915]] FIFO watermark level: 3 [ 16.360751] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) B: 31 [ 16.360800] [drm:i9xx_update_wm [i915]] FIFO watermarks - A: 8, B: 29 [ 16.360862] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was disabled) [ 16.360912] [drm:i9xx_update_wm [i915]] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 1 [ 16.360969] [drm:intel_enable_pipe [i915]] enabling pipe A [ 16.374885] [drm:verify_connector_state.isra.121 [i915]] [CONNECTOR:45:VGA-1] [ 16.374954] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A] [ 16.388896] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 16.388954] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry [ 16.389185] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 16.389254] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 16.389310] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 16.389367] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 16.390057] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 16.390114] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 16.390170] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] [ 16.390227] [drm:intel_crt_detect [i915]] starting load-detect on CRT [ 16.402346] [drm:intel_release_load_detect_pipe [i915]] [CONNECTOR:45:VGA-1], [ENCODER:46:CRT] [ 16.402458] [drm:intel_disable_pipe [i915]] disabling pipe A [ 16.432169] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) A: 28 [ 16.432221] [drm:intel_calculate_wm [i915]] FIFO entries required for mode: 25 [ 16.432269] [drm:intel_calculate_wm [i915]] FIFO watermark level: 3 [ 16.432319] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) B: 31 [ 16.432368] [drm:i9xx_update_wm [i915]] FIFO watermarks - A: 8, B: 29 [ 16.432419] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was disabled) [ 16.432469] [drm:i9xx_update_wm [i915]] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 1 [ 16.432534] [drm:intel_atomic_commit_tail [i915]] [ENCODER:39:LVDS] [ 16.432592] [drm:intel_atomic_commit_tail [i915]] [ENCODER:46:CRT] [ 16.432651] [drm:intel_atomic_commit_tail [i915]] [ENCODER:48:TV] [ 16.432709] [drm:verify_connector_state.isra.121 [i915]] [CONNECTOR:45:VGA-1] [ 16.432781] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A] [ 16.432819] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:45:VGA-1] disconnected [ 16.432838] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:SVIDEO-1] [ 16.432896] [drm:intel_tv_detect [i915]] [CONNECTOR:47:SVIDEO-1] force=1 [ 16.432954] [drm:intel_get_load_detect_pipe [i915]] [CONNECTOR:47:SVIDEO-1], [ENCODER:48:TV] [ 16.433045] [drm:intel_atomic_check [i915]] [CONNECTOR:47:SVIDEO-1] checking for sink bpp constrains [ 16.433103] [drm:intel_tv_compute_config [i915]] forcing bpc to 8 for TV [ 16.433161] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 24, dithering: 0 [ 16.433219] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset] [ 16.433277] [drm:intel_dump_pipe_config [i915]] output_types: TVOUT (0x20) [ 16.433335] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 [ 16.433392] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 16.433449] [drm:intel_dump_pipe_config [i915]] requested mode: [ 16.433516] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0 [ 16.433573] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 16.433603] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0 [ 16.433663] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0 [ 16.433720] [drm:intel_dump_pipe_config [i915]] port clock: 108000, pipe src size: 1280x1024, pixel rate 108000 [ 16.433778] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 16.433836] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 16.433893] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 16.433950] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 16.434008] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane B] disabled, scaler_id = 0 [ 16.434066] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0 [ 16.434383] [drm:intel_atomic_commit_tail [i915]] [ENCODER:39:LVDS] [ 16.434441] [drm:intel_atomic_commit_tail [i915]] [ENCODER:46:CRT] [ 16.434498] [drm:intel_atomic_commit_tail [i915]] [ENCODER:48:TV] [ 16.435235] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) A: 28 [ 16.435284] [drm:intel_calculate_wm [i915]] FIFO entries required for mode: 25 [ 16.435332] [drm:intel_calculate_wm [i915]] FIFO watermark level: 3 [ 16.435381] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) B: 31 [ 16.435431] [drm:i9xx_update_wm [i915]] FIFO watermarks - A: 8, B: 29 [ 16.435480] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was disabled) [ 16.435530] [drm:i9xx_update_wm [i915]] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 1 [ 16.435587] [drm:intel_enable_pipe [i915]] enabling pipe A [ 16.484154] [drm:verify_connector_state.isra.121 [i915]] [CONNECTOR:47:SVIDEO-1] [ 16.484218] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A] [ 16.521261] [drm:intel_tv_detect [i915]] TV detected: c0c07, 7f0000aa [ 16.521318] [drm:intel_tv_detect [i915]] Unrecognised TV connection [ 16.552121] [drm:intel_release_load_detect_pipe [i915]] [CONNECTOR:47:SVIDEO-1], [ENCODER:48:TV] [ 16.552229] [drm:intel_disable_pipe [i915]] disabling pipe A [ 16.600201] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) A: 28 [ 16.600254] [drm:intel_calculate_wm [i915]] FIFO entries required for mode: 25 [ 16.600302] [drm:intel_calculate_wm [i915]] FIFO watermark level: 3 [ 16.600351] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) B: 31 [ 16.600401] [drm:i9xx_update_wm [i915]] FIFO watermarks - A: 8, B: 29 [ 16.600452] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was disabled) [ 16.600502] [drm:i9xx_update_wm [i915]] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 1 [ 16.600566] [drm:intel_atomic_commit_tail [i915]] [ENCODER:39:LVDS] [ 16.600624] [drm:intel_atomic_commit_tail [i915]] [ENCODER:46:CRT] [ 16.600682] [drm:intel_atomic_commit_tail [i915]] [ENCODER:48:TV] [ 16.600741] [drm:verify_connector_state.isra.121 [i915]] [CONNECTOR:47:SVIDEO-1] [ 16.600813] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A] [ 16.600853] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:SVIDEO-1] disconnected [ 16.600872] [drm:drm_setup_crtcs [drm_kms_helper]] connector 38 enabled? yes [ 16.600886] [drm:drm_setup_crtcs [drm_kms_helper]] connector 45 enabled? no [ 16.600899] [drm:drm_setup_crtcs [drm_kms_helper]] connector 47 enabled? no [ 16.600960] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 16.600975] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 38 [ 16.600990] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 38 0 [ 16.601004] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1280x800 [ 16.601017] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1280x800 config [ 16.601036] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1280x800 set on crtc 37 (0,0) [ 17.809786] intel_rng: FWH not detected [ 18.714403] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 18.720792] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 18.928139] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 19.223656] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.670967] gpio_ich: ACPI BAR is busy, GPI 0 - 15 unavailable [ 19.671392] gpio_ich: GPIO from 446 to 495 on gpio_ich [ 19.960797] b43-phy0: Broadcom 4318 WLAN found (core revision 9) [ 20.004044] b43-phy0: Found PHY: Analog 3, Type 2 (G), Revision 7 [ 20.004067] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 8, Version 0 [ 20.020879] Broadcom 43xx driver loaded [ Features: PNL ] [ 20.897244] snd_hda_codec_idt hdaudioC0D0: autoconfig for STAC9200: line_outs=1 (0xe/0x0/0x0/0x0/0x0) type:speaker [ 20.897250] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 20.897254] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 20.897257] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 [ 20.897259] snd_hda_codec_idt hdaudioC0D0: inputs: [ 20.897263] snd_hda_codec_idt hdaudioC0D0: Mic=0x10 [ 22.028669] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 22.028791] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 22.848210] b44 ssb1:0 eth0: Link is up at 100 Mbps, full duplex [ 22.848215] b44 ssb1:0 eth0: Flow control is off for TX and off for RX [ 22.848319] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 23.498557] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 26.848347] [drm:intel_crt_detect [i915]] [CONNECTOR:45:VGA-1] force=0 [ 26.848606] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 26.848662] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry [ 26.848902] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 26.848972] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 26.849030] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 26.849086] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 26.849667] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 26.849723] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 26.849779] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] [ 26.849838] [drm:intel_tv_detect [i915]] [CONNECTOR:47:SVIDEO-1] force=0 [ 27.078351] Adding 2097148k swap on /dev/sda5. Priority:-2 extents:1 across:2097148k FS [ 30.721993] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 31.275390] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 31.498454] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 32.889251] audit: type=1400 audit(1534459623.266:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=493 comm="apparmor_parser" [ 32.889261] audit: type=1400 audit(1534459623.266:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=493 comm="apparmor_parser" [ 32.900756] audit: type=1400 audit(1534459623.278:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=494 comm="apparmor_parser" [ 32.900765] audit: type=1400 audit(1534459623.278:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=494 comm="apparmor_parser" [ 32.900770] audit: type=1400 audit(1534459623.278:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=494 comm="apparmor_parser" [ 32.900774] audit: type=1400 audit(1534459623.278:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=494 comm="apparmor_parser" [ 32.908469] audit: type=1400 audit(1534459623.286:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=496 comm="apparmor_parser" [ 32.908477] audit: type=1400 audit(1534459623.286:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=496 comm="apparmor_parser" [ 32.908482] audit: type=1400 audit(1534459623.286:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=496 comm="apparmor_parser" [ 32.937673] audit: type=1400 audit(1534459623.314:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=497 comm="apparmor_parser" [ 37.088180] [drm:intel_crt_detect [i915]] [CONNECTOR:45:VGA-1] force=0 [ 37.088438] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 37.088494] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry [ 37.088734] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 37.088801] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 37.088858] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 37.088914] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 37.089493] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 37.089549] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 37.089605] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] [ 37.089664] [drm:intel_tv_detect [i915]] [CONNECTOR:47:SVIDEO-1] force=0 [ 46.215869] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 47.328177] [drm:intel_crt_detect [i915]] [CONNECTOR:45:VGA-1] force=0 [ 47.328485] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 47.328541] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry [ 47.328972] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 47.329038] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 47.329095] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 47.329151] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 47.329730] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 47.329786] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 47.329842] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] [ 47.329901] [drm:intel_tv_detect [i915]] [CONNECTOR:47:SVIDEO-1] force=0 [ 49.472507] [drm:drm_mode_addfb2 [drm]] [FB:62] [ 49.472846] [drm:intel_framebuffer_init [i915]] Unsupported tiling 0x100000000000002! [ 49.472885] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer [ 49.472942] [drm:drm_mode_addfb2 [drm]] [FB:62] [ 50.020747] [drm:drm_mode_addfb2 [drm]] [FB:62] [ 50.971080] [drm:drm_mode_setcrtc [drm]] [CRTC:37:pipe B] [ 50.971130] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:38:LVDS-1] [ 50.973229] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) A: 28 [ 50.973385] [drm:intel_calculate_wm [i915]] FIFO entries required for mode: 25 [ 50.973434] [drm:intel_calculate_wm [i915]] FIFO watermark level: 3 [ 50.973483] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) B: 31 [ 50.973533] [drm:i9xx_update_wm [i915]] FIFO watermarks - A: 8, B: 29 [ 50.973584] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was disabled) [ 50.973633] [drm:i9xx_update_wm [i915]] self-refresh entries: 80 [ 50.973683] [drm:i9xx_update_wm [i915]] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 15 [ 50.973732] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is enabled (was disabled) [ 50.984128] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) A: 28 [ 50.984179] [drm:intel_calculate_wm [i915]] FIFO entries required for mode: 25 [ 50.984228] [drm:intel_calculate_wm [i915]] FIFO watermark level: 3 [ 50.984277] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) B: 31 [ 50.984326] [drm:i9xx_update_wm [i915]] FIFO watermarks - A: 8, B: 29 [ 50.984376] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was enabled) [ 50.984425] [drm:i9xx_update_wm [i915]] self-refresh entries: 80 [ 50.984475] [drm:i9xx_update_wm [i915]] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 15 [ 50.984524] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is enabled (was disabled) [ 51.474951] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:38:LVDS-1] [ 51.475023] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 51.475053] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 51.475111] [drm:do_detailed_mode [drm]] composite sync not supported [ 51.475176] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:38:LVDS-1] probed modes : [ 51.475207] [drm:drm_mode_debug_printmodeline [drm]] Modeline 41:"1280x800" 60 71150 1280 1328 1360 1440 800 802 808 823 0x48 0xa [ 51.475976] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:SVIDEO-1] [ 51.476095] [drm:intel_tv_detect [i915]] [CONNECTOR:47:SVIDEO-1] force=1 [ 51.476197] [drm:intel_get_load_detect_pipe [i915]] [CONNECTOR:47:SVIDEO-1], [ENCODER:48:TV] [ 51.477614] [drm:intel_atomic_check [i915]] [CONNECTOR:47:SVIDEO-1] checking for sink bpp constrains [ 51.477673] [drm:intel_tv_compute_config [i915]] forcing bpc to 8 for TV [ 51.477731] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 24, dithering: 0 [ 51.477789] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset] [ 51.477848] [drm:intel_dump_pipe_config [i915]] output_types: TVOUT (0x20) [ 51.477906] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 [ 51.477963] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 51.478020] [drm:intel_dump_pipe_config [i915]] requested mode: [ 51.478078] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0 [ 51.478135] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 51.478165] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0 [ 51.478224] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0 [ 51.478282] [drm:intel_dump_pipe_config [i915]] port clock: 108000, pipe src size: 1280x1024, pixel rate 108000 [ 51.478340] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 51.478397] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 51.478456] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 51.478513] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 51.478571] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane B] disabled, scaler_id = 0 [ 51.478629] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0 [ 51.478976] [drm:intel_atomic_commit_tail [i915]] [ENCODER:39:LVDS] [ 51.479034] [drm:intel_atomic_commit_tail [i915]] [ENCODER:46:CRT] [ 51.479092] [drm:intel_atomic_commit_tail [i915]] [ENCODER:48:TV] [ 51.479832] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) A: 28 [ 51.479882] [drm:intel_calculate_wm [i915]] FIFO entries required for mode: 25 [ 51.479931] [drm:intel_calculate_wm [i915]] FIFO watermark level: 3 [ 51.479980] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) B: 31 [ 51.480029] [drm:i9xx_update_wm [i915]] FIFO watermarks - A: 8, B: 29 [ 51.482871] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was enabled) [ 51.482922] [drm:i9xx_update_wm [i915]] self-refresh entries: 80 [ 51.482971] [drm:i9xx_update_wm [i915]] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 15 [ 51.483021] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is enabled (was disabled) [ 51.483080] [drm:intel_enable_pipe [i915]] enabling pipe A [ 51.576928] [drm:verify_connector_state.isra.121 [i915]] [CONNECTOR:47:SVIDEO-1] [ 51.576992] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A] [ 51.608299] [drm:intel_tv_detect [i915]] TV detected: c0c07, 7f0000aa [ 51.608358] [drm:intel_tv_detect [i915]] Unrecognised TV connection [ 51.636197] [drm:intel_release_load_detect_pipe [i915]] [CONNECTOR:47:SVIDEO-1], [ENCODER:48:TV] [ 51.636312] [drm:intel_disable_pipe [i915]] disabling pipe A [ 51.684138] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) A: 28 [ 51.684190] [drm:intel_calculate_wm [i915]] FIFO entries required for mode: 25 [ 51.684238] [drm:intel_calculate_wm [i915]] FIFO watermark level: 3 [ 51.684288] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) B: 31 [ 51.684338] [drm:i9xx_update_wm [i915]] FIFO watermarks - A: 8, B: 29 [ 51.684388] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was enabled) [ 51.684438] [drm:i9xx_update_wm [i915]] self-refresh entries: 80 [ 51.684487] [drm:i9xx_update_wm [i915]] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 15 [ 51.684537] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is enabled (was disabled) [ 51.684602] [drm:intel_atomic_commit_tail [i915]] [ENCODER:39:LVDS] [ 51.684660] [drm:intel_atomic_commit_tail [i915]] [ENCODER:46:CRT] [ 51.684717] [drm:intel_atomic_commit_tail [i915]] [ENCODER:48:TV] [ 51.684776] [drm:verify_connector_state.isra.121 [i915]] [CONNECTOR:47:SVIDEO-1] [ 51.684846] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A] [ 51.684885] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:SVIDEO-1] disconnected [ 51.684938] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:45:VGA-1] [ 51.684997] [drm:intel_crt_detect [i915]] [CONNECTOR:45:VGA-1] force=1 [ 51.685307] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 51.685363] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry [ 51.685796] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 51.685861] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 51.685918] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 51.685974] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 51.686552] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 51.686609] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 51.686665] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] [ 51.686723] [drm:intel_get_load_detect_pipe [i915]] [CONNECTOR:45:VGA-1], [ENCODER:46:CRT] [ 51.686812] [drm:intel_atomic_check [i915]] [CONNECTOR:45:VGA-1] checking for sink bpp constrains [ 51.686872] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 24, dithering: 0 [ 51.686931] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset] [ 51.686989] [drm:intel_dump_pipe_config [i915]] output_types: ANALOG (0x2) [ 51.687047] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 [ 51.687104] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 51.687161] [drm:intel_dump_pipe_config [i915]] requested mode: [ 51.687192] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa [ 51.687249] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 51.687279] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa [ 51.687338] [drm:intel_dump_pipe_config [i915]] crtc timings: 31500 640 664 704 832 480 489 491 520, type: 0x10 flags: 0xa [ 51.687396] [drm:intel_dump_pipe_config [i915]] port clock: 31500, pipe src size: 640x480, pixel rate 31500 [ 51.687454] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 51.687511] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 51.687569] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 51.687626] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 51.687684] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane B] disabled, scaler_id = 0 [ 51.687742] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0 [ 51.691178] [drm:intel_atomic_commit_tail [i915]] [ENCODER:39:LVDS] [ 51.691238] [drm:intel_atomic_commit_tail [i915]] [ENCODER:46:CRT] [ 51.691296] [drm:intel_atomic_commit_tail [i915]] [ENCODER:48:TV] [ 51.691999] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) A: 28 [ 51.692092] [drm:intel_calculate_wm [i915]] FIFO entries required for mode: 25 [ 51.692140] [drm:intel_calculate_wm [i915]] FIFO watermark level: 3 [ 51.692190] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) B: 31 [ 51.692239] [drm:i9xx_update_wm [i915]] FIFO watermarks - A: 8, B: 29 [ 51.692532] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was enabled) [ 51.692582] [drm:i9xx_update_wm [i915]] self-refresh entries: 80 [ 51.692632] [drm:i9xx_update_wm [i915]] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 15 [ 51.692682] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is enabled (was disabled) [ 51.692739] [drm:intel_enable_pipe [i915]] enabling pipe A [ 51.723502] [drm:verify_connector_state.isra.121 [i915]] [CONNECTOR:45:VGA-1] [ 51.723571] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A] [ 51.734578] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 51.734636] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry [ 51.734885] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 51.734951] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 51.735009] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 51.735065] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 51.735645] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 51.735702] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 51.735757] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] [ 51.735814] [drm:intel_crt_detect [i915]] starting load-detect on CRT [ 51.747889] [drm:intel_release_load_detect_pipe [i915]] [CONNECTOR:45:VGA-1], [ENCODER:46:CRT] [ 51.748006] [drm:intel_disable_pipe [i915]] disabling pipe A [ 51.780163] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) A: 28 [ 51.780216] [drm:intel_calculate_wm [i915]] FIFO entries required for mode: 25 [ 51.780265] [drm:intel_calculate_wm [i915]] FIFO watermark level: 3 [ 51.780314] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) B: 31 [ 51.780364] [drm:i9xx_update_wm [i915]] FIFO watermarks - A: 8, B: 29 [ 51.780414] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was enabled) [ 51.780464] [drm:i9xx_update_wm [i915]] self-refresh entries: 80 [ 51.780513] [drm:i9xx_update_wm [i915]] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 15 [ 51.780563] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is enabled (was disabled) [ 51.780629] [drm:intel_atomic_commit_tail [i915]] [ENCODER:39:LVDS] [ 51.780687] [drm:intel_atomic_commit_tail [i915]] [ENCODER:46:CRT] [ 51.780746] [drm:intel_atomic_commit_tail [i915]] [ENCODER:48:TV] [ 51.780804] [drm:verify_connector_state.isra.121 [i915]] [CONNECTOR:45:VGA-1] [ 51.780876] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A] [ 51.780919] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:45:VGA-1] disconnected [ 57.568177] [drm:intel_crt_detect [i915]] [CONNECTOR:45:VGA-1] force=0 [ 57.568626] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 57.568683] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry [ 57.568947] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 57.569014] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 57.569070] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 57.569126] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 57.569708] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 57.569764] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 57.569820] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] [ 57.569879] [drm:intel_tv_detect [i915]] [CONNECTOR:47:SVIDEO-1] force=0 [ 60.597857] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) A: 28 [ 60.597910] [drm:intel_calculate_wm [i915]] FIFO entries required for mode: 25 [ 60.597958] [drm:intel_calculate_wm [i915]] FIFO watermark level: 3 [ 60.598008] [drm:i9xx_get_fifo_size [i915]] FIFO size - (0x00001d9c) B: 31 [ 60.598057] [drm:i9xx_update_wm [i915]] FIFO watermarks - A: 8, B: 29 [ 60.598108] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was enabled) [ 60.598157] [drm:i9xx_update_wm [i915]] self-refresh entries: 80 [ 60.598207] [drm:i9xx_update_wm [i915]] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 15 [ 60.598257] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is enabled (was disabled) [ 67.808177] [drm:intel_crt_detect [i915]] [CONNECTOR:45:VGA-1] force=0 [ 67.808444] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 67.808500] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry [ 67.808783] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 67.808851] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 67.808908] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 67.808964] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 67.809543] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga [ 67.809599] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 67.809655] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] [ 67.809714] [drm:intel_tv_detect [i915]] [CONNECTOR:47:SVIDEO-1] force=0