[ 0.000000] microcode: microcode updated early to revision 0x25, date = 2018-04-02 [ 0.000000] Linux version 4.18.3-gentoo (root@xmg13) (gcc version 7.3.0 (Gentoo 7.3.0-r4 p1.6)) #1 SMP Tue Aug 21 02:48:21 CEST 2018 [ 0.000000] Command line: \EFI\Gentoo\vmlinuz-4.18.3-gentoo root=UUID=77ed8441-2919-4e70-802f-2df93dad2735 ro pcie_aspm=force i915.enable_fbc=1 crashkernel=128M pcie_port_pm=off zswap.enabled=1 zswap.zpool=z3fold initrd=EFI\Gentoo\initramfs-4.18.3-gentoo.img drm.debug=0x1e log_buf_len=4M [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b80a1fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b80a2000-0x00000000b80a8fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b80a9000-0x00000000b892dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b892e000-0x00000000b8bedfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b8bee000-0x00000000c8c0afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c8c0b000-0x00000000c910afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c910b000-0x00000000c9632fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c9633000-0x00000000c97aafff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c97ab000-0x00000000c9ffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c9fff000-0x00000000c9ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xb5cd6018-0xb5cef657] usable ==> usable [ 0.000000] e820: update [mem 0xb5cd6018-0xb5cef657] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b5cd6017] usable [ 0.000000] reserve setup_data: [mem 0x00000000b5cd6018-0x00000000b5cef657] usable [ 0.000000] reserve setup_data: [mem 0x00000000b5cef658-0x00000000b80a1fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000b80a2000-0x00000000b80a8fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000b80a9000-0x00000000b892dfff] usable [ 0.000000] reserve setup_data: [mem 0x00000000b892e000-0x00000000b8bedfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b8bee000-0x00000000c8c0afff] usable [ 0.000000] reserve setup_data: [mem 0x00000000c8c0b000-0x00000000c910afff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000c910b000-0x00000000c9632fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000c9633000-0x00000000c97aafff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000c97ab000-0x00000000c9ffefff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000c9fff000-0x00000000c9ffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000042fdfffff] usable [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ESRT=0xc9f56998 ACPI 2.0=0xc973b000 ACPI=0xc973b000 SMBIOS=0xc9f56598 TPMEventLog=0xb8c05018 [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Clevo W230SD /powered by premamod.com, BIOS 1.03.04PM v1 07/09/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x42fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7C00000000 write-back [ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back [ 0.000000] 2 base 0420000000 mask 7FF0000000 write-back [ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable [ 0.000000] 5 base 00CC000000 mask 7FFC000000 uncachable [ 0.000000] 6 base 00CB000000 mask 7FFF000000 uncachable [ 0.000000] 7 base 042FE00000 mask 7FFFE00000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved [ 0.000000] last_pfn = 0xca000 max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x00000000c9f56998 to 0x00000000c9f569d0. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [(____ptrval____)] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x19addd000, 0x19adddfff] PGTABLE [ 0.000000] BRK [0x19adde000, 0x19addefff] PGTABLE [ 0.000000] BRK [0x19addf000, 0x19addffff] PGTABLE [ 0.000000] BRK [0x19ade0000, 0x19ade0fff] PGTABLE [ 0.000000] BRK [0x19ade1000, 0x19ade1fff] PGTABLE [ 0.000000] BRK [0x19ade2000, 0x19ade2fff] PGTABLE [ 0.000000] BRK [0x19ade3000, 0x19ade3fff] PGTABLE [ 0.000000] BRK [0x19ade4000, 0x19ade4fff] PGTABLE [ 0.000000] BRK [0x19ade5000, 0x19ade5fff] PGTABLE [ 0.000000] BRK [0x19ade6000, 0x19ade6fff] PGTABLE [ 0.000000] BRK [0x19ade7000, 0x19ade7fff] PGTABLE [ 0.000000] BRK [0x19ade8000, 0x19ade8fff] PGTABLE [ 0.000000] log_buf_len: 4194304 bytes [ 0.000000] early log buf free: 254516(97%) [ 0.000000] Secure boot disabled [ 0.000000] RAMDISK: [mem 0x7eddc000-0x7fffefff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000C973B000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000C973B0A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000C974D028 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000C973B1F0 011E35 (v02 ALASKA A M I 00000038 INTL 20120711) [ 0.000000] ACPI: FACS 0x00000000C97AAF80 000040 [ 0.000000] ACPI: APIC 0x00000000C974D138 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000C974D1D0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000C974D218 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: ASF! 0x00000000C974D2B8 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: SSDT 0x00000000C974D360 000F92 (v01 TrmRef PtidDevc 00001000 INTL 20120711) [ 0.000000] ACPI: TPM2 0x00000000C974E2F8 000034 (v03 Tpm2Tabl 00000001 AMI 00000000) [ 0.000000] ACPI: SSDT 0x00000000C974E330 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000C974E870 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.000000] ACPI: MCFG 0x00000000C974F348 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000C974F388 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000C974F3C0 000315 (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000C974F6D8 001948 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: SSDT 0x00000000C9751020 00111A (v01 SgRef SgPeg 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000C9752140 000393 (v01 CppcTa CppcTabl 00001000 INTL 20120711) [ 0.000000] ACPI: PCCT 0x00000000C97524D8 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000C9752548 000AC4 (v01 Cpc_Ta Cpc_Tabl 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000C9753010 001CC4 (v01 OptRef OptTabl 00001000 INTL 20120711) [ 0.000000] ACPI: BGRT 0x00000000C9754CD8 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Reserving 128MB of memory at 768MB for crashkernel (System RAM: 16268MB) [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000042fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b80a1fff] [ 0.000000] node 0: [mem 0x00000000b80a9000-0x00000000b892dfff] [ 0.000000] node 0: [mem 0x00000000b8bee000-0x00000000c8c0afff] [ 0.000000] node 0: [mem 0x00000000c910b000-0x00000000c9632fff] [ 0.000000] node 0: [mem 0x00000000c9fff000-0x00000000c9ffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000042fdfffff] [ 0.000000] Reserved but unavailable: 29175 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042fdfffff] [ 0.000000] On node 0 totalpages: 4164617 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12794 pages used for memmap [ 0.000000] DMA32 zone: 818797 pages, LIFO batch:31 [ 0.000000] Normal zone: 52216 pages used for memmap [ 0.000000] Normal zone: 3341824 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at [mem 0xcb200000-0xcf1fffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] [mem 0xcf200000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x8d/0x4ab with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 44 pages/cpu @(____ptrval____) s141080 r8192 d30952 u262144 [ 0.000000] pcpu-alloc: s141080 r8192 d30952 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4099522 [ 0.000000] Kernel command line: \EFI\Gentoo\vmlinuz-4.18.3-gentoo root=UUID=77ed8441-2919-4e70-802f-2df93dad2735 ro pcie_aspm=force i915.enable_fbc=1 crashkernel=128M pcie_port_pm=off zswap.enabled=1 zswap.zpool=z3fold initrd=EFI\Gentoo\initramfs-4.18.3-gentoo.img drm.debug=0x1e log_buf_len=4M [ 0.000000] PCIe ASPM is forcibly enabled [ 0.000000] Setting dangerous option i915.enable_fbc - tainting kernel [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Memory: 16031456K/16658468K available (14348K kernel code, 1844K rwdata, 5332K rodata, 1312K init, 1156K bss, 627012K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180531 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.005000] tsc: Fast TSC calibration using PIT [ 0.006000] tsc: Detected 2494.354 MHz processor [ 0.006000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f4641691f, max_idle_ns: 440795264483 ns [ 0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.70 BogoMIPS (lpj=2494354) [ 0.006000] pid_max: default: 32768 minimum: 301 [ 0.006000] Security Framework initialized [ 0.006000] SELinux: Initializing. [ 0.006000] SELinux: Starting in permissive mode [ 0.006000] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.006000] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.006000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.006000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.006000] mce: CPU supports 9 MCE banks [ 0.006000] CPU0: Thermal monitoring enabled (TM1) [ 0.006000] process: using mwait in idle threads [ 0.006000] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.006000] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.006000] Spectre V2 : Mitigation: Full generic retpoline [ 0.006000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.006000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.006000] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.006000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.016702] Freeing SMP alternatives memory: 36K [ 0.018907] TSC deadline timer enabled [ 0.018909] smpboot: CPU0: Intel(R) Core(TM) i7-4710MQ CPU @ 2.50GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.018979] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.019000] ... version: 3 [ 0.019000] ... bit width: 48 [ 0.019000] ... generic registers: 4 [ 0.019000] ... value mask: 0000ffffffffffff [ 0.019000] ... max period: 00007fffffffffff [ 0.019000] ... fixed-purpose events: 3 [ 0.019000] ... event mask: 000000070000000f [ 0.019000] Hierarchical SRCU implementation. [ 0.019000] smp: Bringing up secondary CPUs ... [ 0.019160] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.019204] x86: Booting SMP configuration: [ 0.019206] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.025256] smp: Brought up 1 node, 8 CPUs [ 0.025256] smpboot: Max logical packages: 1 [ 0.025256] smpboot: Total of 8 processors activated (39909.66 BogoMIPS) [ 0.026351] devtmpfs: initialized [ 0.026351] PM: Registering ACPI NVS region [mem 0xb80a2000-0xb80a8fff] (28672 bytes) [ 0.026351] PM: Registering ACPI NVS region [mem 0xc9633000-0xc97aafff] (1540096 bytes) [ 0.026351] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.026351] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.026351] kworker/u16:0 (60) used greatest stack depth: 14208 bytes left [ 0.026351] xor: automatically using best checksumming function avx [ 0.027041] RTC time: 22:46:17, date: 09/11/18 [ 0.027164] NET: Registered protocol family 16 [ 0.027344] audit: initializing netlink subsys (disabled) [ 0.027350] audit: type=2000 audit(1536705977.027:1): state=initialized audit_enabled=0 res=1 [ 0.027350] cpuidle: using governor ladder [ 0.027350] cpuidle: using governor menu [ 0.027350] Detected 1 PCC Subspaces [ 0.027350] Registering PCC driver as Mailbox controller [ 0.027350] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.027350] ACPI: bus type PCI registered [ 0.027350] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.027350] PCI: Using configuration type 1 for base access [ 0.027367] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.031360] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.031360] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.031360] cryptd: max_cpu_qlen set to 1000 [ 0.047015] raid6: sse2x1 gen() 11078 MB/s [ 0.064028] raid6: sse2x1 xor() 7480 MB/s [ 0.081038] raid6: sse2x2 gen() 13121 MB/s [ 0.098051] raid6: sse2x2 xor() 8632 MB/s [ 0.115065] raid6: sse2x4 gen() 15554 MB/s [ 0.132077] raid6: sse2x4 xor() 9990 MB/s [ 0.149090] raid6: avx2x1 gen() 21648 MB/s [ 0.166101] raid6: avx2x1 xor() 14361 MB/s [ 0.183117] raid6: avx2x2 gen() 25199 MB/s [ 0.200129] raid6: avx2x2 xor() 16343 MB/s [ 0.217142] raid6: avx2x4 gen() 29750 MB/s [ 0.234153] raid6: avx2x4 xor() 19480 MB/s [ 0.234155] raid6: using algorithm avx2x4 gen() 29750 MB/s [ 0.234156] raid6: .... xor() 19480 MB/s, rmw enabled [ 0.234158] raid6: using avx2x2 recovery algorithm [ 0.235023] ACPI: Added _OSI(Module Device) [ 0.235023] ACPI: Added _OSI(Processor Device) [ 0.235023] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.235023] ACPI: Added _OSI(Processor Aggregator Device) [ 0.235023] ACPI: Added _OSI(Linux-Dell-Video) [ 0.242768] ACPI: 10 ACPI AML tables successfully acquired and loaded [ 0.245384] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.246090] ACPI: Dynamic OEM Table Load: [ 0.246097] ACPI: SSDT 0xFFFF998C9CC63800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.246227] ACPI: Dynamic OEM Table Load: [ 0.246227] ACPI: SSDT 0xFFFF998C9C663800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.247072] ACPI: Dynamic OEM Table Load: [ 0.247078] ACPI: SSDT 0xFFFF998C9C73C200 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.247897] ACPI: EC: EC started [ 0.247900] ACPI: EC: interrupt blocked [ 0.248173] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC [ 0.248177] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.248180] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions [ 0.248182] ACPI: Interpreter enabled [ 0.248203] ACPI: (supports S0 S3 S5) [ 0.248205] ACPI: Using IOAPIC for interrupt routing [ 0.248233] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.248511] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.255256] ACPI: Power Resource [NVP3] (on) [ 0.256009] ACPI: Power Resource [NVP2] (on) [ 0.257490] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.257490] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.257490] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] [ 0.257610] PCI host bridge to bus 0000:00 [ 0.257613] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.257615] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.257618] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.257620] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.257622] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.257624] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.257627] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.257629] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.257631] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.257634] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.257636] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.257638] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.257640] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.257642] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.257645] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.257647] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window] [ 0.257650] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.257657] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000 [ 0.258006] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.258006] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.258009] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000 [ 0.258009] pci 0000:00:02.0: reg 0x10: [mem 0xf6400000-0xf67fffff 64bit] [ 0.258009] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.258009] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.258009] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.258009] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.258009] pci 0000:00:03.0: reg 0x10: [mem 0xf7c14000-0xf7c17fff 64bit] [ 0.258009] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.258020] pci 0000:00:14.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit] [ 0.258072] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.258137] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.258157] pci 0000:00:16.0: reg 0x10: [mem 0xf7c1e000-0xf7c1e00f 64bit] [ 0.258211] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.258282] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.258301] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c1c000-0xf7c1c3ff] [ 0.258374] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.259006] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.259006] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c10000-0xf7c13fff 64bit] [ 0.259006] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.259009] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.259009] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.259009] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.259009] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.259009] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.259009] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.259022] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.259042] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c1b000-0xf7c1b3ff] [ 0.259116] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.259187] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100 [ 0.260006] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601 [ 0.260006] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.260006] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.260006] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.260006] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.260006] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.260006] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c1a000-0xf7c1a7ff] [ 0.260006] pci 0000:00:1f.2: PME# supported from D3hot [ 0.260010] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.260010] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c19000-0xf7c190ff 64bit] [ 0.260010] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.260010] pci 0000:01:00.0: [10de:139b] type 00 class 0x030200 [ 0.260010] pci 0000:01:00.0: reg 0x10: [mem 0xf5000000-0xf5ffffff] [ 0.260010] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.260010] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.260010] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.260010] pci 0000:01:00.0: reg 0x30: [mem 0xf6000000-0xf607ffff pref] [ 0.260010] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.260010] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.260010] pci 0000:00:01.0: bridge window [mem 0xf5000000-0xf60fffff] [ 0.260010] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.260010] acpiphp: Slot [1] registered [ 0.260010] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.260010] acpiphp: Slot [1-1] registered [ 0.260147] pci 0000:03:00.0: [8086:08b1] type 00 class 0x028000 [ 0.260343] pci 0000:03:00.0: reg 0x10: [mem 0xf7200000-0xf7201fff 64bit] [ 0.261106] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.261323] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.261327] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.261331] pci 0000:00:1c.2: bridge window [mem 0xf7200000-0xf7bfffff] [ 0.261335] pci 0000:00:1c.2: bridge window [mem 0xf2b00000-0xf34fffff 64bit pref] [ 0.262010] acpiphp: Slot [1-2] registered [ 0.262010] pci 0000:04:00.0: [10ec:5287] type 00 class 0xff0000 [ 0.262010] pci 0000:04:00.0: reg 0x10: [mem 0xf6815000-0xf6815fff] [ 0.262010] pci 0000:04:00.0: reg 0x30: [mem 0xf6800000-0xf680ffff pref] [ 0.262010] pci 0000:04:00.0: supports D1 D2 [ 0.262010] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.262085] pci 0000:04:00.1: [10ec:8168] type 00 class 0x020000 [ 0.262166] pci 0000:04:00.1: reg 0x10: [io 0xc000-0xc0ff] [ 0.262240] pci 0000:04:00.1: reg 0x18: [mem 0xf6814000-0xf6814fff 64bit] [ 0.262309] pci 0000:04:00.1: reg 0x20: [mem 0xf6810000-0xf6813fff 64bit] [ 0.262613] pci 0000:04:00.1: supports D1 D2 [ 0.262614] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.262892] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.262897] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.262900] pci 0000:00:1c.3: bridge window [mem 0xf6800000-0xf71fffff] [ 0.262904] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf2afffff 64bit pref] [ 0.262921] pci_bus 0000:00: on NUMA node 0 [ 0.264006] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.264006] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.264006] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.264006] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.264006] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.264006] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.264006] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.264006] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.264084] ACPI: EC: interrupt unblocked [ 0.264092] ACPI: EC: event unblocked [ 0.264099] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.264101] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events [ 0.265014] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.265014] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.265014] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.265014] vgaarb: loaded [ 0.265088] SCSI subsystem initialized [ 0.265104] libata version 3.00 loaded. [ 0.265104] ACPI: bus type USB registered [ 0.265104] usbcore: registered new interface driver usbfs [ 0.265104] usbcore: registered new interface driver hub [ 0.265104] usbcore: registered new device driver usb [ 0.265104] pps_core: LinuxPPS API ver. 1 registered [ 0.265106] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.265112] PTP clock support registered [ 0.265136] EDAC MC: Ver: 3.0.0 [ 0.265136] Registered efivars operations [ 0.268026] Advanced Linux Sound Architecture Driver Initialized. [ 0.268033] PCI: Using ACPI for IRQ routing [ 0.268035] PCI: pci_cache_line_size set to 64 bytes [ 0.268102] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.268103] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.268104] e820: reserve RAM buffer [mem 0xb5cd6018-0xb7ffffff] [ 0.268105] e820: reserve RAM buffer [mem 0xb80a2000-0xbbffffff] [ 0.268105] e820: reserve RAM buffer [mem 0xb892e000-0xbbffffff] [ 0.268106] e820: reserve RAM buffer [mem 0xc8c0b000-0xcbffffff] [ 0.268107] e820: reserve RAM buffer [mem 0xc9633000-0xcbffffff] [ 0.268108] e820: reserve RAM buffer [mem 0xca000000-0xcbffffff] [ 0.268109] e820: reserve RAM buffer [mem 0x42fe00000-0x42fffffff] [ 0.268186] NetLabel: Initializing [ 0.268188] NetLabel: domain hash size = 128 [ 0.268189] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.268201] NetLabel: unlabeled traffic allowed by default [ 0.268216] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 0.268318] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.268324] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.272001] clocksource: Switched to clocksource tsc-early [ 0.285956] VFS: Disk quotas dquot_6.6.0 [ 0.285971] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.286008] FS-Cache: Loaded [ 0.286058] CacheFiles: Loaded [ 0.287187] pnp: PnP ACPI init [ 0.287264] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.287272] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.287409] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.287412] system 00:01: [io 0xffff] has been reserved [ 0.287414] system 00:01: [io 0xffff] has been reserved [ 0.287417] system 00:01: [io 0xffff] has been reserved [ 0.287419] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.287421] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.287423] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.287425] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.287427] system 00:01: [io 0x1800-0x18fe] has been reserved [ 0.287429] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.287432] system 00:01: [io 0x3322-0x3323] has been reserved [ 0.287437] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.287455] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.287491] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.287496] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.287517] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.287557] pnp 00:05: Plug and Play ACPI device, IDs SYN1212 PNP0f13 (active) [ 0.287618] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.287623] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.288017] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.288020] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.288022] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.288024] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.288027] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.288029] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.288031] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.288034] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.288036] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.288039] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.288041] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.288043] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.288048] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.288240] pnp: PnP ACPI: found 8 devices [ 0.292773] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.292806] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.292809] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.292812] pci 0000:00:01.0: bridge window [mem 0xf5000000-0xf60fffff] [ 0.292815] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.292820] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.292830] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.292833] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.292838] pci 0000:00:1c.2: bridge window [mem 0xf7200000-0xf7bfffff] [ 0.292843] pci 0000:00:1c.2: bridge window [mem 0xf2b00000-0xf34fffff 64bit pref] [ 0.292849] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.292852] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.292857] pci 0000:00:1c.3: bridge window [mem 0xf6800000-0xf71fffff] [ 0.292862] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf2afffff 64bit pref] [ 0.292869] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.292870] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.292871] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.292872] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.292873] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.292874] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.292875] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.292876] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.292877] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.292878] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.292879] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.292880] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.292881] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.292882] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.292883] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.292884] pci_bus 0000:00: resource 19 [mem 0xcf200000-0xfeafffff window] [ 0.292885] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.292886] pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf60fffff] [ 0.292887] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.292888] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.292889] pci_bus 0000:03: resource 1 [mem 0xf7200000-0xf7bfffff] [ 0.292890] pci_bus 0000:03: resource 2 [mem 0xf2b00000-0xf34fffff 64bit pref] [ 0.292891] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.292892] pci_bus 0000:04: resource 1 [mem 0xf6800000-0xf71fffff] [ 0.292893] pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf2afffff 64bit pref] [ 0.292987] NET: Registered protocol family 2 [ 0.293096] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) [ 0.293113] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.293216] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.293311] TCP: Hash tables configured (established 131072 bind 65536) [ 0.293335] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.293361] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.293417] NET: Registered protocol family 1 [ 0.293492] RPC: Registered named UNIX socket transport module. [ 0.293494] RPC: Registered udp transport module. [ 0.293495] RPC: Registered tcp transport module. [ 0.293497] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.293499] NET: Registered protocol family 44 [ 0.293507] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.293904] PCI: CLS 64 bytes, default 64 [ 0.293933] Trying to unpack rootfs image as initramfs... [ 0.541364] Freeing initrd memory: 18572K [ 0.541403] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.541407] software IO TLB [mem 0xbef35000-0xc2f35000] (64MB) mapped at [(____ptrval____)-(____ptrval____)] [ 0.541600] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 0.541603] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 0.541605] RAPL PMU: hw unit of domain package 2^-14 Joules [ 0.541606] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 0.541608] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 0.542252] Scanning for low memory corruption every 60 seconds [ 0.542279] pmd_set_huge: Cannot satisfy [mem 0xd0000000-0xd0200000] with a huge-page mapping due to MTRR override. [ 0.542294] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x7e9000 bytes, mapped to 0x(____ptrval____) [ 0.542297] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1920x1080x32, linelength=7680 [ 0.546111] Console: switching to colour frame buffer device 240x67 [ 0.549601] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered! [ 0.550382] Initialise system trusted keyrings [ 0.550404] Key type blacklist registered [ 0.550435] workingset: timestamp_bits=46 max_order=22 bucket_order=0 [ 0.551724] zbud: loaded [ 0.552147] FS-Cache: Netfs 'nfs' registered for caching [ 0.552253] NFS: Registering the id_resolver key type [ 0.552273] Key type id_resolver registered [ 0.552285] Key type id_legacy registered [ 0.552325] fuse init (API version 7.27) [ 0.552478] orangefs_debugfs_init: called with debug mask: :none: :0: [ 0.552519] orangefs_init: module version upstream loaded [ 0.552601] ocfs2: Registered cluster interface o2cb [ 0.552654] OCFS2 User DLM kernel interface loaded [ 0.552825] pstore: using deflate compression [ 0.552883] SELinux: Registering netfilter hooks [ 0.554082] async_tx: api initialized (async) [ 0.554099] Key type asymmetric registered [ 0.554114] Asymmetric key parser 'x509' registered [ 0.554130] Key type pkcs7_test registered [ 0.554173] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.554223] io scheduler noop registered [ 0.554237] io scheduler deadline registered [ 0.554287] io scheduler cfq registered (default) [ 0.554304] io scheduler mq-deadline registered [ 0.554319] io scheduler kyber registered [ 0.554352] io scheduler bfq registered [ 0.554866] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.555383] Non-volatile memory driver v1.3 [ 0.555420] Linux agpgart interface v0.103 [ 0.555510] intel_idle: MWAIT substates: 0x42120 [ 0.555511] intel_idle: v0.4.1 model 0x3C [ 0.555746] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.556269] ACPI: AC Adapter [AC] (on-line) [ 0.556345] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.556384] ACPI: Power Button [PWRB] [ 0.556431] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.556464] ACPI: Sleep Button [SLPB] [ 0.556511] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 0.556543] ACPI: Lid Switch [LID0] [ 0.556586] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.557410] ACPI: Power Button [PWRF] [ 0.558972] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.559804] ACPI: Thermal Zone [TZ0] (47 C) [ 0.561047] [drm:intel_pch_type] Found LynxPoint PCH [ 0.561049] [drm:i915_driver_load] WOPCM size: 1024KiB [ 0.561052] [drm:intel_uc_init_early] enable_guc=0 (submission:no huc:no) [ 0.561053] [drm:intel_uc_init_early] guc_log_level=0 (enabled:no, verbose:no, verbosity:0) [ 0.561055] [drm:intel_power_domains_init] Allowed DC state mask 00 [ 0.561173] [drm:i915_driver_load] ppgtt mode: 1 [ 0.561183] ACPI: Battery Slot [BAT0] (battery present) [ 0.561206] [drm:i915_ggtt_probe_hw] GGTT size = 2048M [ 0.562051] [drm:i915_ggtt_probe_hw] GMADR size = 256M [ 0.562053] [drm:i915_ggtt_probe_hw] DSM size = 64M [ 0.562054] checking generic (d0000000 7e9000) vs hw (d0000000 10000000) [ 0.562055] fb: switching to inteldrmfb from simple [ 0.562882] Console: switching to colour dummy device 80x25 [ 0.562952] [drm] Replacing VGA console driver [ 0.563238] [drm:i915_gem_init_stolen] GEN6_STOLEN_RESERVED = cf100017 [ 0.563240] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 64512K [ 0.563246] [drm:intel_opregion_setup] graphic opregion physical addr: 0xc978f018 [ 0.563251] [drm:intel_opregion_setup] Public ACPI methods supported [ 0.563252] [drm:intel_opregion_setup] SWSCI supported [ 0.566007] [drm:intel_opregion_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 [ 0.566008] [drm:intel_opregion_setup] ASLE supported [ 0.566010] [drm:intel_opregion_setup] ASLE extension supported [ 0.566012] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 0.566056] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.566059] [drm] Driver supports precise vblank timestamp query. [ 0.566062] [drm:intel_bios_init] Set default to SSC at 120000 kHz [ 0.566064] [drm:intel_bios_init] VBT signature "$VBT HASWELL ", BDB version 189 [ 0.566066] [drm:intel_bios_init] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 0.566067] [drm:intel_bios_init] crt_ddc_bus_pin: 0 [ 0.567238] [drm:intel_opregion_get_panel_type] Ignoring OpRegion panel type (0) [ 0.567241] [drm:intel_bios_init] Panel type: 15 (VBT) [ 0.567242] [drm:intel_bios_init] DRRS supported mode is static [ 0.567244] [drm:intel_bios_init] Found panel mode in BIOS VBT tables: [ 0.567249] [drm:drm_mode_debug_printmodeline] Modeline 0:"2048x1536" 0 164250 2048 2064 2080 2144 1536 1537 1538 1555 0x8 0xa [ 0.567252] [drm:intel_bios_init] VBT backlight PWM modulation frequency 1000 Hz, active high, min brightness 26, level 80, controller 0 [ 0.567253] [drm:intel_bios_init] Found SDVO panel mode in BIOS VBT tables: [ 0.567256] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 0.567257] [drm:intel_bios_init] DRRS State Enabled:0 [ 0.567259] [drm:intel_bios_init] VBT has unknown eDP link rate value 2 [ 0.567260] [drm:intel_bios_init] No SDVO device info is found in VBT [ 0.567262] [drm:intel_bios_init] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 0.567263] [drm:intel_bios_init] VBT HDMI level shift for port A: 0 [ 0.567265] [drm:intel_bios_init] Port C VBT info: DP:1 HDMI:0 DVI:0 EDP:0 CRT:0 [ 0.567266] [drm:intel_bios_init] VBT HDMI level shift for port C: 3 [ 0.567268] [drm:intel_bios_init] Port D VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 0.567269] [drm:intel_bios_init] VBT HDMI level shift for port D: 6 [ 0.567406] [drm:intel_dsm_detect] no _DSM method for intel device [ 0.567412] [drm:i915_driver_load] rawclk rate: 125000 kHz [ 0.567416] [drm:intel_power_well_enable] enabling always-on [ 0.567418] [drm:intel_power_well_enable] enabling display [ 0.567422] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.568000] [drm:intel_fbc_init] Sanitized enable_fbc value: 1 [ 0.568013] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec) [ 0.568015] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec) [ 0.568017] [drm:intel_print_wm_latency] Primary WM2 latency 36 (18.0 usec) [ 0.568019] [drm:intel_print_wm_latency] Primary WM3 latency 90 (45.0 usec) [ 0.568020] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec) [ 0.568022] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec) [ 0.568024] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec) [ 0.568026] [drm:intel_print_wm_latency] Sprite WM2 latency 36 (18.0 usec) [ 0.568028] [drm:intel_print_wm_latency] Sprite WM3 latency 90 (45.0 usec) [ 0.568029] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec) [ 0.568031] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec) [ 0.568033] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec) [ 0.568035] [drm:intel_print_wm_latency] Cursor WM2 latency 36 (18.0 usec) [ 0.568036] [drm:intel_print_wm_latency] Cursor WM3 latency 90 (45.0 usec) [ 0.568038] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec) [ 0.568040] [drm:intel_modeset_init] 3 display pipes available. [ 0.568073] [drm:intel_dump_cdclk_state] Current CDCLK 540000 kHz, VCO 0 kHz, ref 0 kHz, bypass 0 kHz, voltage level 0 [ 0.568075] [drm:intel_update_max_cdclk] Max CD clock rate: 540000 kHz [ 0.568077] [drm:intel_modeset_init] Max dotclock rate: 540000 kHz [ 0.568387] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 0.568391] [drm:intel_dp_init_connector] using AUX A for port A (VBT) [ 0.568400] [drm:intel_pps_dump_state] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000 [ 0.568402] [drm:intel_pps_dump_state] vbt t1_t3 3000 t8 1000 t9 12000 t10 500 t11_t12 6000 [ 0.568404] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 300, power down delay 50, power cycle delay 600 [ 0.568406] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 100, off delay 1200 [ 0.568413] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0xbb80001, PP_OFF 0x1f40001, PP_DIV 0x186906 [ 0.568419] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 0.568428] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f [ 0.568838] [drm:intel_dp_read_dpcd] DPCD: 12 0a 82 41 00 00 01 00 b3 00 00 00 00 0b 00 [ 0.569223] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 0.569827] [drm:intel_dp_init_connector] eDP DPCD: 01 18 00 [ 0.573150] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 0.573152] [drm:drm_add_display_info] non_desktop set to 0 [ 0.573166] [drm:drm_add_display_info] non_desktop set to 0 [ 0.573168] [drm:intel_dp_init_connector] VBT doesn't support DRRS [ 0.573176] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 306/976 [ 0.573183] [drm:intel_dp_init_connector] Adding DP connector on port C [ 0.573185] [drm:intel_dp_init_connector] using AUX C for port C (VBT) [ 0.573193] [drm:intel_hdmi_init_connector] Adding HDMI connector on port D [ 0.573195] [drm:intel_hdmi_init_connector] Using DDC pin 0x6 for port D (VBT) [ 0.573226] [drm:intel_modeset_setup_hw_state] pipe A active planes 0x1 [ 0.573227] [drm:intel_modeset_setup_hw_state] pipe A active planes 0x1 [ 0.573229] [drm:intel_modeset_setup_hw_state] pipe A active planes 0x1 [ 0.573230] [drm:intel_modeset_setup_hw_state] [CRTC:39:pipe A] hw state readout: enabled [ 0.573232] [drm:intel_modeset_setup_hw_state] pipe B active planes 0x0 [ 0.573233] [drm:intel_modeset_setup_hw_state] pipe B active planes 0x0 [ 0.573235] [drm:intel_modeset_setup_hw_state] pipe B active planes 0x0 [ 0.573236] [drm:intel_modeset_setup_hw_state] [CRTC:51:pipe B] hw state readout: disabled [ 0.573238] [drm:intel_modeset_setup_hw_state] pipe C active planes 0x0 [ 0.573239] [drm:intel_modeset_setup_hw_state] pipe C active planes 0x0 [ 0.573240] [drm:intel_modeset_setup_hw_state] pipe C active planes 0x0 [ 0.573241] [drm:intel_modeset_setup_hw_state] [CRTC:63:pipe C] hw state readout: disabled [ 0.573243] [drm:intel_modeset_setup_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0 [ 0.573244] [drm:intel_modeset_setup_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 0.573246] [drm:intel_modeset_setup_hw_state] SPLL hw state readout: crtc_mask 0x00000000, on 0 [ 0.573247] [drm:intel_modeset_setup_hw_state] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1 [ 0.573248] [drm:intel_modeset_setup_hw_state] LCPLL 1350 hw state readout: crtc_mask 0x00000001, on 1 [ 0.573249] [drm:intel_modeset_setup_hw_state] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1 [ 0.573252] [drm:intel_ddi_get_config] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp [ 0.573254] [drm:intel_modeset_setup_hw_state] [ENCODER:64:DDI A] hw state readout: enabled, pipe A [ 0.573255] [drm:intel_modeset_setup_hw_state] [ENCODER:72:DDI C] hw state readout: disabled, pipe A [ 0.573257] [drm:intel_modeset_setup_hw_state] [ENCODER:74:DP-MST A] hw state readout: disabled, pipe A [ 0.573258] [drm:intel_modeset_setup_hw_state] [ENCODER:75:DP-MST B] hw state readout: disabled, pipe B [ 0.573259] [drm:intel_modeset_setup_hw_state] [ENCODER:76:DP-MST C] hw state readout: disabled, pipe C [ 0.573260] [drm:intel_modeset_setup_hw_state] [ENCODER:79:DDI D] hw state readout: disabled, pipe A [ 0.573262] [drm:intel_modeset_setup_hw_state] [CONNECTOR:65:eDP-1] hw state readout: enabled [ 0.573264] [drm:intel_modeset_setup_hw_state] [CONNECTOR:73:DP-1] hw state readout: disabled [ 0.573266] [drm:intel_modeset_setup_hw_state] [CONNECTOR:80:HDMI-A-1] hw state readout: disabled [ 0.573270] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state (____ptrval____) [ 0.573275] [drm:intel_dump_pipe_config] [CRTC:39:pipe A][setup_hw_state] [ 0.573277] [drm:intel_dump_pipe_config] output_types: EDP (0x100) [ 0.573279] [drm:intel_dump_pipe_config] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 [ 0.573281] [drm:intel_dump_m_n_config.isra.64] dp m_n: lanes: 2; gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 0.573282] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 0.573284] [drm:intel_dump_pipe_config] requested mode: [ 0.573286] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138779 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 0.573288] [drm:intel_dump_pipe_config] adjusted mode: [ 0.573290] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138779 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 0.573292] [drm:intel_dump_pipe_config] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x40 flags: 0xa [ 0.573294] [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 1920x1080, pixel rate 138779 [ 0.573295] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 0.573297] [drm:intel_dump_pipe_config] ips: 0, double wide: 0 [ 0.573298] [drm:intel_dump_pipe_config] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 0.573300] [drm:intel_dump_pipe_config] planes on this crtc [ 0.573301] [drm:intel_dump_pipe_config] [PLANE:28:primary A] disabled, scaler_id = 0 [ 0.573303] [drm:intel_dump_pipe_config] [PLANE:31:sprite A] disabled, scaler_id = 0 [ 0.573304] [drm:intel_dump_pipe_config] [PLANE:36:cursor A] disabled, scaler_id = 0 [ 0.573306] [drm:intel_dump_pipe_config] [CRTC:51:pipe B][setup_hw_state] [ 0.573307] [drm:intel_dump_pipe_config] output_types: (0x0) [ 0.573309] [drm:intel_dump_pipe_config] cpu_transcoder: B, pipe bpp: 0, dithering: 0 [ 0.573310] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 0.573311] [drm:intel_dump_pipe_config] requested mode: [ 0.573314] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 0.573315] [drm:intel_dump_pipe_config] adjusted mode: [ 0.573317] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 0.573319] [drm:intel_dump_pipe_config] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 0.573321] [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 0.573322] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 0.573324] [drm:intel_dump_pipe_config] ips: 0, double wide: 0 [ 0.573325] [drm:intel_dump_pipe_config] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 0.573326] [drm:intel_dump_pipe_config] planes on this crtc [ 0.573328] [drm:intel_dump_pipe_config] [PLANE:40:primary B] disabled, scaler_id = 0 [ 0.573329] [drm:intel_dump_pipe_config] [PLANE:43:sprite B] disabled, scaler_id = 0 [ 0.573331] [drm:intel_dump_pipe_config] [PLANE:48:cursor B] disabled, scaler_id = 0 [ 0.573332] [drm:intel_dump_pipe_config] [CRTC:63:pipe C][setup_hw_state] [ 0.573334] [drm:intel_dump_pipe_config] output_types: (0x0) [ 0.573335] [drm:intel_dump_pipe_config] cpu_transcoder: C, pipe bpp: 0, dithering: 0 [ 0.573336] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 0.573338] [drm:intel_dump_pipe_config] requested mode: [ 0.573340] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 0.573341] [drm:intel_dump_pipe_config] adjusted mode: [ 0.573343] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 0.573345] [drm:intel_dump_pipe_config] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 0.573347] [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 0.573348] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 0.573349] [drm:intel_dump_pipe_config] ips: 0, double wide: 0 [ 0.573351] [drm:intel_dump_pipe_config] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 0.573352] [drm:intel_dump_pipe_config] planes on this crtc [ 0.573353] [drm:intel_dump_pipe_config] [PLANE:52:primary C] disabled, scaler_id = 0 [ 0.573355] [drm:intel_dump_pipe_config] [PLANE:55:sprite C] disabled, scaler_id = 0 [ 0.573356] [drm:intel_dump_pipe_config] [PLANE:60:cursor C] disabled, scaler_id = 0 [ 0.573358] [drm:intel_modeset_setup_hw_state] LCPLL 810 enabled but not in use, disabling [ 0.573359] [drm:intel_modeset_setup_hw_state] LCPLL 2700 enabled but not in use, disabling [ 0.573364] [drm:intel_power_well_disable] disabling display [ 0.573369] [drm:i9xx_get_initial_plane_config] pipe A/primary A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 0.573372] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0x0000000000000000, gtt_offset=0x0000000000000000, size=0x00000000007e9000 [ 0.573379] [drm:intel_alloc_initial_plane_obj.isra.96] initial plane fb obj (____ptrval____) [ 0.573409] [drm:intel_modeset_init] pipe A active planes 0x1 [ 0.573411] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 0.573414] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] (____ptrval____) state to (____ptrval____) [ 0.573416] [drm:drm_atomic_get_crtc_state] Added [CRTC:51:pipe B] (____ptrval____) state to (____ptrval____) [ 0.573418] [drm:drm_atomic_get_crtc_state] Added [CRTC:63:pipe C] (____ptrval____) state to (____ptrval____) [ 0.573419] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] (____ptrval____) state to (____ptrval____) [ 0.573421] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] (____ptrval____) state to (____ptrval____) [ 0.573423] [drm:drm_atomic_get_plane_state] Added [PLANE:36:cursor A] (____ptrval____) state to (____ptrval____) [ 0.573424] [drm:drm_atomic_get_plane_state] Added [PLANE:40:primary B] (____ptrval____) state to (____ptrval____) [ 0.573426] [drm:drm_atomic_get_plane_state] Added [PLANE:43:sprite B] (____ptrval____) state to (____ptrval____) [ 0.573427] [drm:drm_atomic_get_plane_state] Added [PLANE:48:cursor B] (____ptrval____) state to (____ptrval____) [ 0.573429] [drm:drm_atomic_get_plane_state] Added [PLANE:52:primary C] (____ptrval____) state to (____ptrval____) [ 0.573430] [drm:drm_atomic_get_plane_state] Added [PLANE:55:sprite C] (____ptrval____) state to (____ptrval____) [ 0.573432] [drm:drm_atomic_get_plane_state] Added [PLANE:60:cursor C] (____ptrval____) state to (____ptrval____) [ 0.573434] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:65:eDP-1] (____ptrval____) state to (____ptrval____) [ 0.573435] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:73:DP-1] (____ptrval____) state to (____ptrval____) [ 0.573437] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:80:HDMI-A-1] (____ptrval____) state to (____ptrval____) [ 0.573440] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:65:eDP-1] [ 0.573442] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 0.573443] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:73:DP-1] [ 0.573444] [drm:drm_atomic_helper_check_modeset] Disabling [CONNECTOR:73:DP-1] [ 0.573445] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:80:HDMI-A-1] [ 0.573446] [drm:drm_atomic_helper_check_modeset] Disabling [CONNECTOR:80:HDMI-A-1] [ 0.573450] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 84 [ 0.573451] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 0.573458] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 0.573460] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 0.573466] [drm:intel_wopcm_init] Calculated GuC WOPCM Region: [16KiB, 1008KiB) [ 0.573510] [drm:i915_gem_init_ggtt] clearing unused GTT space: [7ea000, 80000000] [ 0.574514] [drm:i915_ppgtt_create] Allocated pde space (2M) at GTT entry: 7fe00 [ 0.574516] [drm:i915_ppgtt_create] Adding PPGTT at offset 7fe00000 [ 0.574518] [drm:intel_ctx_workarounds_init] Number of context specific w/a: 0 [ 0.574519] [drm:i915_gem_contexts_init] logical context support initialized [ 0.574677] [drm:sandybridge_pcode_read] warning: pcode (read from mbox 1a) mailbox access failed for intel_init_gt_powersave: -6 [ 0.574680] [drm:intel_init_gt_powersave] Overclocking supported, max: 1150MHz, overclock: 1150MHz [ 0.574755] [drm:sandybridge_pcode_read] warning: pcode (read from mbox 5) mailbox access failed for intel_enable_gt_powersave: -6 [ 0.574889] [drm:intel_fbdev_init] found possible fb from plane A [ 0.574890] [drm:intel_fbdev_init] pipe B not active or no fb, skipping [ 0.574891] [drm:intel_fbdev_init] pipe C not active or no fb, skipping [ 0.574892] [drm:intel_fbdev_init] checking plane A for BIOS fb [ 0.574894] [drm:intel_fbdev_init] pipe A area: 1920x1080, bpp: 32, size: 8294400 [ 0.574895] [drm:intel_fbdev_init] fb big enough for plane A (8294400 >= 8294400) [ 0.574896] [drm:intel_fbdev_init] pipe B not active, skipping [ 0.574897] [drm:intel_fbdev_init] pipe C not active, skipping [ 0.574898] [drm:intel_fbdev_init] using BIOS fb for initial console [ 0.575224] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered [ 0.575241] [drm:intel_dp_connector_register] registering DPDDC-A bus for card0-eDP-1 [ 0.575284] [drm:intel_dp_connector_register] registering DPDDC-C bus for card0-DP-1 [ 0.575338] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0 [ 0.575449] [drm:intel_opregion_register] 3 outputs detected [ 0.575484] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 0.575506] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no) [ 0.575640] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:52/LNXVIDEO:00/input/input4 [ 0.575684] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 0.575803] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5 [ 0.575823] i915 device info: pciid=0x0416 rev=0x06 platform=HASWELL gen=7 [ 0.575825] i915 device info: is_mobile: no [ 0.575826] i915 device info: is_lp: no [ 0.575830] [drm:drm_setup_crtcs] [ 0.575832] i915 device info: is_alpha_support: no [ 0.575835] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:eDP-1] [ 0.575836] i915 device info: has_64bit_reloc: no [ 0.575839] [drm:intel_dp_detect] [CONNECTOR:65:eDP-1] [ 0.575840] i915 device info: has_aliasing_ppgtt: yes [ 0.575840] i915 device info: has_csr: no [ 0.575841] i915 device info: has_ddi: yes [ 0.575843] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000 [ 0.575844] i915 device info: has_dp_mst: yes [ 0.575846] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 0.575847] i915 device info: has_reset_engine: no [ 0.575848] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 0.575849] i915 device info: has_fbc: yes [ 0.575849] i915 device info: has_fpga_dbg: yes [ 0.575850] i915 device info: has_full_ppgtt: yes [ 0.575851] i915 device info: has_full_48bit_ppgtt: no [ 0.575852] i915 device info: has_gmch_display: no [ 0.575853] i915 device info: has_guc: no [ 0.575854] i915 device info: has_guc_ct: no [ 0.575855] i915 device info: has_hotplug: yes [ 0.575856] i915 device info: has_l3_dpf: yes [ 0.575857] i915 device info: has_llc: yes [ 0.575858] i915 device info: has_logical_ring_contexts: no [ 0.575859] i915 device info: has_logical_ring_elsq: no [ 0.575860] i915 device info: has_logical_ring_preemption: no [ 0.575861] i915 device info: has_overlay: no [ 0.575862] i915 device info: has_pooled_eu: no [ 0.575863] i915 device info: has_psr: yes [ 0.575864] i915 device info: has_rc6: yes [ 0.575865] i915 device info: has_rc6p: no [ 0.575866] i915 device info: has_resource_streamer: yes [ 0.575867] i915 device info: has_runtime_pm: yes [ 0.575868] i915 device info: has_snoop: no [ 0.575869] i915 device info: unfenced_needs_alignment: no [ 0.575870] i915 device info: cursor_needs_physical: no [ 0.575871] i915 device info: hws_needs_physical: no [ 0.575872] i915 device info: overlay_needs_physical: no [ 0.575873] i915 device info: supports_tv: no [ 0.575874] i915 device info: has_ipc: no [ 0.575875] i915 device info: slice total: 1, mask=0001 [ 0.575877] i915 device info: subslice total: 2 [ 0.575878] i915 device info: slice0: 2 subslices, mask=0003 [ 0.575879] i915 device info: EU total: 20 [ 0.575880] i915 device info: EU per subslice: 10 [ 0.575881] i915 device info: has slice power gating: no [ 0.575882] i915 device info: has subslice power gating: no [ 0.575883] i915 device info: has EU power gating: no [ 0.575884] i915 device info: CS timestamp frequency: 12500 kHz [ 0.576237] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 0.576547] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:eDP-1] status updated from unknown to connected [ 0.576550] [drm:drm_add_display_info] non_desktop set to 0 [ 0.576553] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 0.576554] [drm:drm_add_display_info] non_desktop set to 0 [ 0.576580] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:eDP-1] probed modes : [ 0.576583] [drm:drm_mode_debug_printmodeline] Modeline 66:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 0.576586] [drm:drm_mode_debug_printmodeline] Modeline 67:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 0.576588] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:DP-1] [ 0.576590] [drm:intel_dp_detect] [CONNECTOR:73:DP-1] [ 0.576593] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:DP-1] status updated from unknown to disconnected [ 0.576595] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:DP-1] disconnected [ 0.576597] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] [ 0.576598] [drm:intel_hdmi_detect] [CONNECTOR:80:HDMI-A-1] [ 0.577023] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 0.577024] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 0.577993] brd: module loaded [ 0.578011] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 0.578013] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 0.578015] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 0.578016] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 0.578752] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 0.578754] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 0.579011] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 0.579012] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 0.579314] loop: module loaded [ 0.579389] rtsx_pci 0000:04:00.0: enabling device (0000 -> 0002) [ 0.579930] usbcore: registered new interface driver rtsx_usb [ 0.580014] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 0.580029] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 0.580031] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] status updated from unknown to disconnected [ 0.580033] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected [ 0.580036] [drm:drm_setup_crtcs] connector 65 enabled? yes [ 0.580037] [drm:drm_setup_crtcs] connector 73 enabled? no [ 0.580039] [drm:drm_setup_crtcs] connector 80 enabled? no [ 0.580057] [drm:intel_fb_initial_config] Not using firmware configuration [ 0.580059] [drm:drm_setup_crtcs] looking for cmdline mode on connector 65 [ 0.580061] [drm:drm_setup_crtcs] looking for preferred mode on connector 65 0 [ 0.580062] [drm:drm_setup_crtcs] found mode 1920x1080 [ 0.580063] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config [ 0.580066] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 39 (0,0) [ 0.580084] [drm:intelfb_create] re-using BIOS fb [ 0.580088] [drm:intelfb_create] allocated 1920x1080 fb: 0x00000000 [ 0.580154] fbcon: inteldrmfb (fb0) is primary device [ 0.580178] ahci 0000:00:1f.2: version 3.0 [ 0.580211] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 0.580213] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] (____ptrval____) state to (____ptrval____) [ 0.580215] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] (____ptrval____) state to (____ptrval____) [ 0.580217] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] (____ptrval____) state to (____ptrval____) [ 0.580219] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 0.580220] [drm:drm_atomic_get_plane_state] Added [PLANE:36:cursor A] (____ptrval____) state to (____ptrval____) [ 0.580221] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 0.580223] [drm:drm_atomic_get_plane_state] Added [PLANE:40:primary B] (____ptrval____) state to (____ptrval____) [ 0.580224] [drm:drm_atomic_get_plane_state] Added [PLANE:43:sprite B] (____ptrval____) state to (____ptrval____) [ 0.580225] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 0.580227] [drm:drm_atomic_get_plane_state] Added [PLANE:48:cursor B] (____ptrval____) state to (____ptrval____) [ 0.580228] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 0.580229] [drm:drm_atomic_get_plane_state] Added [PLANE:52:primary C] (____ptrval____) state to (____ptrval____) [ 0.580231] [drm:drm_atomic_get_plane_state] Added [PLANE:55:sprite C] (____ptrval____) state to (____ptrval____) [ 0.580232] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 0.580233] [drm:drm_atomic_get_plane_state] Added [PLANE:60:cursor C] (____ptrval____) state to (____ptrval____) [ 0.580234] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 0.580237] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state (____ptrval____) [ 0.580238] [drm:drm_atomic_set_fb_for_plane] Set [FB:84] for plane state (____ptrval____) [ 0.580240] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:39:pipe A] to (____ptrval____) [ 0.580242] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:65:eDP-1] (____ptrval____) state to (____ptrval____) [ 0.580243] [drm:drm_atomic_set_crtc_for_connector] Link connector state (____ptrval____) to [NOCRTC] [ 0.580245] [drm:drm_atomic_set_crtc_for_connector] Link connector state (____ptrval____) to [CRTC:39:pipe A] [ 0.580247] [drm:drm_atomic_get_crtc_state] Added [CRTC:51:pipe B] (____ptrval____) state to (____ptrval____) [ 0.580248] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state (____ptrval____) [ 0.580249] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 0.580251] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:51:pipe B] to (____ptrval____) [ 0.580252] [drm:drm_atomic_get_crtc_state] Added [CRTC:63:pipe C] (____ptrval____) state to (____ptrval____) [ 0.580254] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state (____ptrval____) [ 0.580255] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 0.580256] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:63:pipe C] to (____ptrval____) [ 0.580257] [drm:drm_atomic_check_only] checking (____ptrval____) [ 0.580261] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:65:eDP-1] [ 0.580262] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 0.580264] [drm:drm_atomic_helper_check_modeset] [CRTC:39:pipe A] needs all connectors, enable: y, active: y [ 0.580265] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:39:pipe A] to (____ptrval____) [ 0.580268] [drm:intel_atomic_check] [CONNECTOR:65:eDP-1] checking for sink bpp constrains [ 0.580269] [drm:intel_atomic_check] clamping display bpp (was 36) to EDID reported max of 24 [ 0.580272] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max rate 270000 max bpp 24 pixel clock 138780KHz [ 0.580274] [drm:intel_dp_compute_config] DP lane count 2 clock 270000 bpp 24 [ 0.580275] [drm:intel_dp_compute_config] DP link rate required 416340 available 540000 [ 0.580283] [drm:intel_atomic_check] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 0.580285] [drm:intel_dump_pipe_config] [CRTC:39:pipe A][modeset] [ 0.580286] [drm:intel_dump_pipe_config] output_types: EDP (0x100) [ 0.580288] [drm:intel_dump_pipe_config] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 [ 0.580290] [drm:intel_dump_m_n_config.isra.64] dp m_n: lanes: 2; gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 0.580291] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 0.580292] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.580293] [drm:intel_dump_pipe_config] requested mode: [ 0.580296] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 0.580297] [drm:intel_dump_pipe_config] adjusted mode: [ 0.580299] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 0.580301] [drm:intel_dump_pipe_config] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 0.580303] [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 1920x1080, pixel rate 138780 [ 0.580304] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 0.580306] [drm:intel_dump_pipe_config] ips: 0, double wide: 0 [ 0.580307] [drm:intel_dump_pipe_config] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 0.580308] [drm:intel_dump_pipe_config] planes on this crtc [ 0.580311] [drm:intel_dump_pipe_config] [PLANE:28:primary A] FB:84, fb = 1920x1080 format = XR24 little-endian (0x34325258) [ 0.580313] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode [ 0.580314] [drm:intel_dump_pipe_config] [PLANE:31:sprite A] disabled, scaler_id = 0 [ 0.580316] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst [ 0.580317] [drm:intel_dump_pipe_config] [PLANE:36:cursor A] disabled, scaler_id = 0 [ 0.580321] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 84 [ 0.580323] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 1, on 1, ms 1 [ 0.580325] [drm:intel_reference_shared_dpll] using LCPLL 1350 for pipe A [ 0.580329] [drm:drm_atomic_commit] committing (____ptrval____) [ 0.580341] [drm:intel_edp_backlight_off] [ 0.583593] scsi host0: ahci [ 0.583711] scsi host1: ahci [ 0.583785] scsi host2: ahci [ 0.583848] scsi host3: ahci [ 0.583913] scsi host4: ahci [ 0.583974] scsi host5: ahci [ 0.584011] ata1: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a100 irq 27 [ 0.584012] ata2: DUMMY [ 0.584013] ata3: DUMMY [ 0.584013] ata4: DUMMY [ 0.584014] ata5: DUMMY [ 0.584016] ata6: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a380 irq 27 [ 0.584095] tun: Universal TUN/TAP device driver, 1.6 [ 0.584185] VFIO - User Level meta-driver version: 0.3 [ 0.584274] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.584276] ehci-pci: EHCI PCI platform driver [ 0.584374] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.584406] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.584416] ehci-pci 0000:00:1a.0: debug port 2 [ 0.588317] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.588326] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c1c000 [ 0.595044] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.595083] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 0.595084] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.595086] usb usb1: Product: EHCI Host Controller [ 0.595087] usb usb1: Manufacturer: Linux 4.18.3-gentoo ehci_hcd [ 0.595088] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.595282] hub 1-0:1.0: USB hub found [ 0.595288] hub 1-0:1.0: 2 ports detected [ 0.595506] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.595606] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.595616] ehci-pci 0000:00:1d.0: debug port 2 [ 0.599516] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.599523] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c1b000 [ 0.606047] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.606085] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 0.606087] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.606088] usb usb2: Product: EHCI Host Controller [ 0.606089] usb usb2: Manufacturer: Linux 4.18.3-gentoo ehci_hcd [ 0.606090] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.606282] hub 2-0:1.0: USB hub found [ 0.606287] hub 2-0:1.0: 2 ports detected [ 0.606409] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.606414] ohci-pci: OHCI PCI platform driver [ 0.606426] uhci_hcd: USB Universal Host Controller Interface driver [ 0.606538] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.606654] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.607722] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.607726] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.607866] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 0.607867] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.607868] usb usb3: Product: xHCI Host Controller [ 0.607869] usb usb3: Manufacturer: Linux 4.18.3-gentoo xhci-hcd [ 0.607869] usb usb3: SerialNumber: 0000:00:14.0 [ 0.607967] hub 3-0:1.0: USB hub found [ 0.607994] hub 3-0:1.0: 14 ports detected [ 0.609565] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.609617] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.609633] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.609676] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18 [ 0.609677] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.609678] usb usb4: Product: xHCI Host Controller [ 0.609679] usb usb4: Manufacturer: Linux 4.18.3-gentoo xhci-hcd [ 0.609679] usb usb4: SerialNumber: 0000:00:14.0 [ 0.609862] hub 4-0:1.0: USB hub found [ 0.609870] hub 4-0:1.0: 6 ports detected [ 0.610299] usbcore: registered new interface driver uas [ 0.610322] usbcore: registered new interface driver usb-storage [ 0.610381] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SENM] at 0x60,0x64 irq 1,12 [ 0.895025] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.895424] ata1.00: supports DRM functions and may not be fully accessible [ 0.896236] ata1.00: ATA-10: Crucial_CT500MX200SSD3, MU04, max UDMA/133 [ 0.896237] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.900074] ata1.00: supports DRM functions and may not be fully accessible [ 0.904993] ata1.00: configured for UDMA/133 [ 0.914032] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.930031] usb 3-6: new full-speed USB device number 2 using xhci_hcd [ 0.930038] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.057378] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.057379] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.057424] usb 3-6: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.08 [ 1.057425] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.057426] usb 3-6: Product: USB Receiver [ 1.057436] usb 3-6: Manufacturer: Logitech [ 1.057634] hub 2-1:1.0: USB hub found [ 1.057719] hub 2-1:1.0: 8 ports detected [ 1.141558] i8042: Detected active multiplexing controller, rev 1.1 [ 1.143893] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.143896] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.143919] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.143945] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.143970] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.144067] mousedev: PS/2 mouse device common for all mice [ 1.144382] usbcore: registered new interface driver synaptics_usb [ 1.144395] rtc_cmos 00:02: RTC can wake from S4 [ 1.144544] rtc_cmos 00:02: registered as rtc0 [ 1.144566] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.144580] i2c /dev entries driver [ 1.144841] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.146077] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 1.146106] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 1.146175] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 1.146223] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 1.146421] device-mapper: uevent: version 1.0.3 [ 1.146494] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.146596] device-mapper: multipath round-robin: version 1.2.0 loaded [ 1.146597] device-mapper: multipath queue-length: version 0.2.0 loaded [ 1.146599] device-mapper: multipath service-time: version 0.3.0 loaded [ 1.146617] device-mapper: raid: Loading target version 1.13.2 [ 1.146724] EDAC ie31200: No ECC support [ 1.146747] intel_pstate: Intel P-state driver initializing [ 1.147089] ledtrig-cpu: registered to indicate activity on CPUs [ 1.147466] EFI Variables Facility v0.08 2004-May-17 [ 1.147664] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 [ 1.153391] pstore: Registered efi as persistent store backend [ 1.153559] hidraw: raw HID events driver (C) Jiri Kosina [ 1.158732] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-6/input2 [ 1.172097] usb 3-7: new full-speed USB device number 3 using xhci_hcd [ 1.262184] usbcore: registered new interface driver usbhid [ 1.262186] usbhid: USB HID core driver [ 1.262338] alienware_wmi: alienware-wmi: No known WMI GUID found [ 1.262775] usbcore: registered new interface driver snd-usb-audio [ 1.263153] xt_time: kernel timezone is -0000 [ 1.263456] Initializing XFRM netlink socket [ 1.263699] NET: Registered protocol family 10 [ 1.267481] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.267485] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.267779] hub 1-1:1.0: USB hub found [ 1.267835] hub 1-1:1.0: 6 ports detected [ 1.271020] Segment Routing with IPv6 [ 1.271076] mip6: Mobile IPv6 [ 1.271570] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.272013] NET: Registered protocol family 17 [ 1.272109] Key type dns_resolver registered [ 1.272123] input: Logitech M705 as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input10 [ 1.272354] logitech-hidpp-device 0003:046D:101B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M705] on usb-0000:00:14.0-6:1 [ 1.272865] microcode: sig=0x306c3, pf=0x10, revision=0x25 [ 1.272914] microcode: Microcode Update Driver: v2.2. [ 1.272924] sched_clock: Marking stable (1272908804, 0)->(1282789488, -9880684) [ 1.273037] registered taskstats version 1 [ 1.273043] Loading compiled-in X.509 certificates [ 1.273132] zswap: loaded using pool lzo/z3fold [ 1.273490] Btrfs loaded, crc32c=crc32c-intel [ 1.275019] Key type encrypted registered [ 1.275426] Magic number: 2:416:805 [ 1.275528] rtc_cmos 00:02: setting system clock to 2018-09-11 22:46:18 UTC (1536705978) [ 1.275569] ALSA device list: [ 1.275570] No soundcards found. [ 1.299410] usb 3-7: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01 [ 1.299413] usb 3-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.415094] usb 3-8: new high-speed USB device number 4 using xhci_hcd [ 1.567050] tsc: Refined TSC clocksource calibration: 2494.223 MHz [ 1.567059] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3e8602d1, max_idle_ns: 440795241926 ns [ 1.604819] clocksource: Switched to clocksource tsc [ 1.606985] usb 3-8: New USB device found, idVendor=5986, idProduct=055c, bcdDevice= 6.05 [ 1.606987] usb 3-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.606988] usb 3-8: Product: BisonCam, NB Pro [ 1.606989] usb 3-8: Manufacturer: Generic [ 1.606990] usb 3-8: SerialNumber: 200901010001 [ 1.823045] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1.823050] [drm:lpt_disable_backlight] cpu backlight was enabled, disabling [ 1.823056] [drm:intel_disable_pipe] disabling pipe A [ 1.833626] [drm:intel_edp_panel_off] Turn eDP port A panel power off [ 1.833633] [drm:intel_edp_panel_off] Wait for panel power off time [ 1.833652] [drm:wait_panel_status] mask b0000000 value 00000000 status a0000003 control 00000000 [ 1.834318] [drm:ilk_hpd_irq_handler] hotplug event received, stat 0x08000000, dig 0x00000011, pins 0x00000010 [ 1.834319] [drm:intel_hpd_irq_handler] digital hpd port A - short [ 1.834347] [drm:intel_dp_hpd_pulse] got hpd irq on port A - short [ 1.885658] [drm:wait_panel_status] Wait complete [ 1.885678] [drm:intel_disable_shared_dpll] disable LCPLL 1350 (active 1, on? 1) for crtc 39 [ 1.885679] [drm:intel_disable_shared_dpll] disabling LCPLL 1350 [ 1.885683] [drm:intel_atomic_commit_tail] [ENCODER:64:DDI A] [ 1.885684] [drm:intel_atomic_commit_tail] [ENCODER:72:DDI C] [ 1.885685] [drm:intel_atomic_commit_tail] [ENCODER:74:DP-MST A] [ 1.885686] [drm:intel_atomic_commit_tail] [ENCODER:75:DP-MST B] [ 1.885689] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 1.885690] [drm:intel_atomic_commit_tail] [ENCODER:76:DP-MST C] [ 1.885691] [drm:intel_atomic_commit_tail] [ENCODER:79:DDI D] [ 1.885693] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1.885695] [drm:verify_single_dpll_state.isra.89] WRPLL 1 [ 1.885697] [drm:verify_single_dpll_state.isra.89] WRPLL 2 [ 1.885699] [drm:verify_single_dpll_state.isra.89] SPLL [ 1.885700] [drm:verify_single_dpll_state.isra.89] LCPLL 810 [ 1.885701] [drm:verify_single_dpll_state.isra.89] LCPLL 1350 [ 1.885703] [drm:verify_single_dpll_state.isra.89] LCPLL 2700 [ 1.885705] [drm:intel_enable_shared_dpll] enable LCPLL 1350 (active 1, on? 0) for crtc 39 [ 1.885706] [drm:intel_enable_shared_dpll] enabling LCPLL 1350 [ 1.885733] [drm:ilk_hpd_irq_handler] hotplug event received, stat 0x08000000, dig 0x00000012, pins 0x00000010 [ 1.885734] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1.885735] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 4 - cnt: 0 [ 2.436371] psmouse serio2: synaptics: queried max coordinates: x [..5692], y [..4680] [ 2.527067] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000000 [ 2.527071] [drm:wait_panel_status] Wait complete [ 2.527078] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 [ 2.527081] [drm:edp_panel_vdd_on] eDP port A panel power wasn't enabled [ 2.578665] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762 [ 2.586407] random: fast init done [ 2.614998] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input13 [ 2.652207] [drm:ilk_hpd_irq_handler] hotplug event received, stat 0x08000000, dig 0x00000012, pins 0x00000010 [ 2.652211] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 2.652212] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 4 - cnt: 1 [ 2.831253] [drm:edp_panel_on] Turn eDP port A panel power on [ 2.831257] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 2.831267] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000008 [ 2.831270] [drm:wait_panel_status] Wait complete [ 2.831275] [drm:edp_panel_on] Wait for panel power on [ 2.831284] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control 0000000b [ 3.131169] [drm:wait_panel_status] Wait complete [ 3.131468] [drm:intel_dp_read_dpcd] DPCD: 12 0a 82 41 00 00 01 00 b3 00 00 00 00 0b 00 [ 3.131923] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 3.131929] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 3.131932] [drm:i915_hotplug_work_func] Connector eDP-1 (pin 4) received hotplug event. [ 3.132223] [drm:intel_dp_start_link_train] Using LINK_BW_SET value 0a [ 3.132533] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 3.132535] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 3.132536] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 3.132538] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS1 [ 3.133135] [drm:intel_dp_set_signal_levels] Using signal levels 04000000 [ 3.133138] [drm:intel_dp_set_signal_levels] Using vswing level 1 [ 3.133140] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 3.133736] [drm:intel_dp_set_signal_levels] Using signal levels 04000000 [ 3.133739] [drm:intel_dp_set_signal_levels] Using vswing level 1 [ 3.133741] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 3.134343] [drm:intel_dp_start_link_train] clock recovery OK [ 3.134346] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS2 [ 3.135253] [drm:intel_dp_set_signal_levels] Using signal levels 05000000 [ 3.135256] [drm:intel_dp_set_signal_levels] Using vswing level 1 [ 3.135259] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 3.136157] [drm:intel_dp_set_signal_levels] Using signal levels 05000000 [ 3.136159] [drm:intel_dp_set_signal_levels] Using vswing level 1 [ 3.136161] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 3.137057] [drm:intel_dp_start_link_train] Channel EQ done. DP Training successful [ 3.137061] [drm:intel_dp_start_link_train] [CONNECTOR:65:eDP-1] Link Training Passed at Link Rate = 270000, Lane count = 2 [ 3.137111] [drm:intel_enable_pipe] enabling pipe A [ 3.137270] [drm:intel_edp_backlight_on] [ 3.137274] [drm:intel_panel_enable_backlight] pipe A [ 3.137283] [drm:intel_panel_actually_set_backlight] set backlight PWM = 306 [ 3.239103] [drm:intel_enable_ddi] Panel doesn't support DRRS [ 3.239113] [drm:intel_fbc_enable] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1 [ 3.239115] [drm:intel_fbc_enable] Enabling FBC on pipe A [ 3.254031] [drm:verify_connector_state.isra.88] [CONNECTOR:65:eDP-1] [ 3.254040] [drm:intel_atomic_commit_tail] [CRTC:39:pipe A] [ 3.254052] [drm:verify_single_dpll_state.isra.89] LCPLL 1350 [ 3.254068] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 3.254074] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 3.254112] [drm:intel_dp_detect] [CONNECTOR:65:eDP-1] [ 3.254115] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 3.254118] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000 [ 3.254121] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] (____ptrval____) state to (____ptrval____) [ 3.254124] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 3.254126] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 3.254128] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 3.254534] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 3.255199] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] (____ptrval____) state to (____ptrval____) [ 3.255203] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] (____ptrval____) state to (____ptrval____) [ 3.255207] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] (____ptrval____) state to (____ptrval____) [ 3.255209] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.255212] [drm:drm_atomic_get_plane_state] Added [PLANE:36:cursor A] (____ptrval____) state to (____ptrval____) [ 3.255215] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.255218] [drm:drm_atomic_get_plane_state] Added [PLANE:40:primary B] (____ptrval____) state to (____ptrval____) [ 3.255221] [drm:drm_atomic_get_plane_state] Added [PLANE:43:sprite B] (____ptrval____) state to (____ptrval____) [ 3.255223] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.255226] [drm:drm_atomic_get_plane_state] Added [PLANE:48:cursor B] (____ptrval____) state to (____ptrval____) [ 3.255229] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.255232] [drm:drm_atomic_get_plane_state] Added [PLANE:52:primary C] (____ptrval____) state to (____ptrval____) [ 3.255234] [drm:drm_atomic_get_plane_state] Added [PLANE:55:sprite C] (____ptrval____) state to (____ptrval____) [ 3.255237] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.255240] [drm:drm_atomic_get_plane_state] Added [PLANE:60:cursor C] (____ptrval____) state to (____ptrval____) [ 3.255242] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.255248] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state (____ptrval____) [ 3.255251] [drm:drm_atomic_set_fb_for_plane] Set [FB:84] for plane state (____ptrval____) [ 3.255254] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:39:pipe A] to (____ptrval____) [ 3.255259] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:65:eDP-1] (____ptrval____) state to (____ptrval____) [ 3.255262] [drm:drm_atomic_set_crtc_for_connector] Link connector state (____ptrval____) to [NOCRTC] [ 3.255265] [drm:drm_atomic_set_crtc_for_connector] Link connector state (____ptrval____) to [CRTC:39:pipe A] [ 3.255269] [drm:drm_atomic_get_crtc_state] Added [CRTC:51:pipe B] (____ptrval____) state to (____ptrval____) [ 3.255271] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state (____ptrval____) [ 3.255273] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.255276] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:51:pipe B] to (____ptrval____) [ 3.255280] [drm:drm_atomic_get_crtc_state] Added [CRTC:63:pipe C] (____ptrval____) state to (____ptrval____) [ 3.255282] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state (____ptrval____) [ 3.255285] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.255287] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:63:pipe C] to (____ptrval____) [ 3.255290] [drm:drm_atomic_check_only] checking (____ptrval____) [ 3.255297] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:65:eDP-1] [ 3.255301] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 3.255308] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 84 [ 3.255311] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 3.255318] [drm:drm_atomic_commit] committing (____ptrval____) [ 3.270695] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 3.270705] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 3.277516] Console: switching to colour frame buffer device 240x67 [ 3.277527] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 3.277532] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] (____ptrval____) state to (____ptrval____) [ 3.277535] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] (____ptrval____) state to (____ptrval____) [ 3.277539] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] (____ptrval____) state to (____ptrval____) [ 3.277541] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.277545] [drm:drm_atomic_get_plane_state] Added [PLANE:36:cursor A] (____ptrval____) state to (____ptrval____) [ 3.277547] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.277550] [drm:drm_atomic_get_plane_state] Added [PLANE:40:primary B] (____ptrval____) state to (____ptrval____) [ 3.277553] [drm:drm_atomic_get_plane_state] Added [PLANE:43:sprite B] (____ptrval____) state to (____ptrval____) [ 3.277555] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.277558] [drm:drm_atomic_get_plane_state] Added [PLANE:48:cursor B] (____ptrval____) state to (____ptrval____) [ 3.277560] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.277563] [drm:drm_atomic_get_plane_state] Added [PLANE:52:primary C] (____ptrval____) state to (____ptrval____) [ 3.277566] [drm:drm_atomic_get_plane_state] Added [PLANE:55:sprite C] (____ptrval____) state to (____ptrval____) [ 3.277568] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.277572] [drm:drm_atomic_get_plane_state] Added [PLANE:60:cursor C] (____ptrval____) state to (____ptrval____) [ 3.277574] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.277579] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state (____ptrval____) [ 3.277582] [drm:drm_atomic_set_fb_for_plane] Set [FB:84] for plane state (____ptrval____) [ 3.277585] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:39:pipe A] to (____ptrval____) [ 3.277590] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:65:eDP-1] (____ptrval____) state to (____ptrval____) [ 3.277593] [drm:drm_atomic_set_crtc_for_connector] Link connector state (____ptrval____) to [NOCRTC] [ 3.277596] [drm:drm_atomic_set_crtc_for_connector] Link connector state (____ptrval____) to [CRTC:39:pipe A] [ 3.277600] [drm:drm_atomic_get_crtc_state] Added [CRTC:51:pipe B] (____ptrval____) state to (____ptrval____) [ 3.277602] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state (____ptrval____) [ 3.277605] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.277608] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:51:pipe B] to (____ptrval____) [ 3.277611] [drm:drm_atomic_get_crtc_state] Added [CRTC:63:pipe C] (____ptrval____) state to (____ptrval____) [ 3.277614] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state (____ptrval____) [ 3.277616] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.277619] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:63:pipe C] to (____ptrval____) [ 3.277621] [drm:drm_atomic_check_only] checking (____ptrval____) [ 3.277628] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:65:eDP-1] [ 3.277631] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 3.277639] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 84 [ 3.277642] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 3.277649] [drm:drm_atomic_commit] committing (____ptrval____) [ 3.287361] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 3.287371] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 3.399065] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.400385] [drm:drm_fb_helper_hotplug_event] [ 3.400388] [drm:drm_setup_crtcs] [ 3.400392] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:eDP-1] [ 3.400396] [drm:intel_dp_detect] [CONNECTOR:65:eDP-1] [ 3.400400] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000 [ 3.400402] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 3.400403] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 3.400538] scsi 0:0:0:0: Direct-Access ATA Crucial_CT500MX2 MU04 PQ: 0 ANSI: 5 [ 3.400796] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 3.402095] ata1.00: Enabling discard_zeroes_data [ 3.402139] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.402218] [drm:drm_add_display_info] non_desktop set to 0 [ 3.402223] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 3.402224] [drm:drm_add_display_info] non_desktop set to 0 [ 3.402253] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:eDP-1] probed modes : [ 3.402257] [drm:drm_mode_debug_printmodeline] Modeline 66:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.402259] [drm:drm_mode_debug_printmodeline] Modeline 67:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 3.402261] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:DP-1] [ 3.402264] [drm:intel_dp_detect] [CONNECTOR:73:DP-1] [ 3.402267] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:DP-1] disconnected [ 3.402269] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] [ 3.402271] [drm:intel_hdmi_detect] [CONNECTOR:80:HDMI-A-1] [ 3.402435] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 3.402437] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 3.402599] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 3.402601] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 3.402602] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 3.402603] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 3.403353] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 3.403355] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 3.403518] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 3.403519] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 3.403681] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 3.403684] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 3.403686] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected [ 3.403688] [drm:drm_setup_crtcs] connector 65 enabled? yes [ 3.403689] [drm:drm_setup_crtcs] connector 73 enabled? no [ 3.403691] [drm:drm_setup_crtcs] connector 80 enabled? no [ 3.403694] [drm:intel_fb_initial_config] Not using firmware configuration [ 3.403697] [drm:drm_setup_crtcs] looking for cmdline mode on connector 65 [ 3.403698] [drm:drm_setup_crtcs] looking for preferred mode on connector 65 0 [ 3.403700] [drm:drm_setup_crtcs] found mode 1920x1080 [ 3.403701] [drm:drm_setup_crtcs] picking CRTCs for 1920x1080 config [ 3.403705] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 39 (0,0) [ 3.403708] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 3.403711] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] (____ptrval____) state to (____ptrval____) [ 3.403713] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] (____ptrval____) state to (____ptrval____) [ 3.403715] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] (____ptrval____) state to (____ptrval____) [ 3.403717] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.403719] [drm:drm_atomic_get_plane_state] Added [PLANE:36:cursor A] (____ptrval____) state to (____ptrval____) [ 3.403720] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.403722] [drm:drm_atomic_get_plane_state] Added [PLANE:40:primary B] (____ptrval____) state to (____ptrval____) [ 3.403734] [drm:drm_atomic_get_plane_state] Added [PLANE:43:sprite B] (____ptrval____) state to (____ptrval____) [ 3.403735] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.403737] [drm:drm_atomic_get_plane_state] Added [PLANE:48:cursor B] (____ptrval____) state to (____ptrval____) [ 3.403738] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.403740] [drm:drm_atomic_get_plane_state] Added [PLANE:52:primary C] (____ptrval____) state to (____ptrval____) [ 3.403742] [drm:drm_atomic_get_plane_state] Added [PLANE:55:sprite C] (____ptrval____) state to (____ptrval____) [ 3.403743] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.403745] [drm:drm_atomic_get_plane_state] Added [PLANE:60:cursor C] (____ptrval____) state to (____ptrval____) [ 3.403746] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.403748] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state (____ptrval____) [ 3.403750] [drm:drm_atomic_set_fb_for_plane] Set [FB:84] for plane state (____ptrval____) [ 3.403752] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:39:pipe A] to (____ptrval____) [ 3.403754] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:65:eDP-1] (____ptrval____) state to (____ptrval____) [ 3.403756] [drm:drm_atomic_set_crtc_for_connector] Link connector state (____ptrval____) to [NOCRTC] [ 3.403758] [drm:drm_atomic_set_crtc_for_connector] Link connector state (____ptrval____) to [CRTC:39:pipe A] [ 3.403760] [drm:drm_atomic_get_crtc_state] Added [CRTC:51:pipe B] (____ptrval____) state to (____ptrval____) [ 3.403761] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state (____ptrval____) [ 3.403763] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.403764] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:51:pipe B] to (____ptrval____) [ 3.403767] [drm:drm_atomic_get_crtc_state] Added [CRTC:63:pipe C] (____ptrval____) state to (____ptrval____) [ 3.403768] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state (____ptrval____) [ 3.403769] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.403771] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:63:pipe C] to (____ptrval____) [ 3.403772] [drm:drm_atomic_check_only] checking (____ptrval____) [ 3.403775] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:65:eDP-1] [ 3.403777] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 3.403782] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 84 [ 3.403784] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 3.403788] [drm:drm_atomic_commit] committing (____ptrval____) [ 3.404359] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 3.406821] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.408072] sd 0:0:0:0: [sda] Write Protect is off [ 3.409304] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.409316] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.410740] ata1.00: Enabling discard_zeroes_data [ 3.413596] sda: sda1 sda2 sda3 sda4 sda5 [ 3.415218] ata1.00: Enabling discard_zeroes_data [ 3.416369] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.420625] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 3.420630] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 3.420642] [drm:drm_fb_helper_hotplug_event] [ 3.420644] [drm:drm_setup_crtcs] [ 3.420647] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:eDP-1] [ 3.420649] [drm:intel_dp_detect] [CONNECTOR:65:eDP-1] [ 3.420652] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000 [ 3.420654] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 3.420655] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 3.421047] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 3.421343] [drm:drm_add_display_info] non_desktop set to 0 [ 3.421346] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 3.421347] [drm:drm_add_display_info] non_desktop set to 0 [ 3.421377] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:eDP-1] probed modes : [ 3.421380] [drm:drm_mode_debug_printmodeline] Modeline 66:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.421383] [drm:drm_mode_debug_printmodeline] Modeline 67:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 3.421385] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:DP-1] [ 3.421388] [drm:intel_dp_detect] [CONNECTOR:73:DP-1] [ 3.421391] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:DP-1] disconnected [ 3.421393] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] [ 3.421394] [drm:intel_hdmi_detect] [CONNECTOR:80:HDMI-A-1] [ 3.421560] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 3.421561] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 3.421724] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 3.421726] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 3.421727] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 3.421729] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 3.422473] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 3.422475] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 3.422638] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 3.422640] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 3.422802] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 3.422804] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 3.422806] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected [ 3.422808] [drm:drm_setup_crtcs] connector 65 enabled? yes [ 3.422810] [drm:drm_setup_crtcs] connector 73 enabled? no [ 3.422812] [drm:drm_setup_crtcs] connector 80 enabled? no [ 3.422814] [drm:intel_fb_initial_config] Not using firmware configuration [ 3.422816] [drm:drm_setup_crtcs] looking for cmdline mode on connector 65 [ 3.422818] [drm:drm_setup_crtcs] looking for preferred mode on connector 65 0 [ 3.422819] [drm:drm_setup_crtcs] found mode 1920x1080 [ 3.422821] [drm:drm_setup_crtcs] picking CRTCs for 1920x1080 config [ 3.422824] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 39 (0,0) [ 3.422827] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 3.422830] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] (____ptrval____) state to (____ptrval____) [ 3.422832] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] (____ptrval____) state to (____ptrval____) [ 3.422834] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] (____ptrval____) state to (____ptrval____) [ 3.422836] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.422838] [drm:drm_atomic_get_plane_state] Added [PLANE:36:cursor A] (____ptrval____) state to (____ptrval____) [ 3.422839] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.422841] [drm:drm_atomic_get_plane_state] Added [PLANE:40:primary B] (____ptrval____) state to (____ptrval____) [ 3.422843] [drm:drm_atomic_get_plane_state] Added [PLANE:43:sprite B] (____ptrval____) state to (____ptrval____) [ 3.422844] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.422846] [drm:drm_atomic_get_plane_state] Added [PLANE:48:cursor B] (____ptrval____) state to (____ptrval____) [ 3.422848] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.422850] [drm:drm_atomic_get_plane_state] Added [PLANE:52:primary C] (____ptrval____) state to (____ptrval____) [ 3.422851] [drm:drm_atomic_get_plane_state] Added [PLANE:55:sprite C] (____ptrval____) state to (____ptrval____) [ 3.422853] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.422855] [drm:drm_atomic_get_plane_state] Added [PLANE:60:cursor C] (____ptrval____) state to (____ptrval____) [ 3.422856] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.422859] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state (____ptrval____) [ 3.422861] [drm:drm_atomic_set_fb_for_plane] Set [FB:84] for plane state (____ptrval____) [ 3.422863] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:39:pipe A] to (____ptrval____) [ 3.422865] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:65:eDP-1] (____ptrval____) state to (____ptrval____) [ 3.422867] [drm:drm_atomic_set_crtc_for_connector] Link connector state (____ptrval____) to [NOCRTC] [ 3.422869] [drm:drm_atomic_set_crtc_for_connector] Link connector state (____ptrval____) to [CRTC:39:pipe A] [ 3.422871] [drm:drm_atomic_get_crtc_state] Added [CRTC:51:pipe B] (____ptrval____) state to (____ptrval____) [ 3.422873] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state (____ptrval____) [ 3.422875] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.422877] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:51:pipe B] to (____ptrval____) [ 3.422879] [drm:drm_atomic_get_crtc_state] Added [CRTC:63:pipe C] (____ptrval____) state to (____ptrval____) [ 3.422880] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state (____ptrval____) [ 3.422882] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 3.422884] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:63:pipe C] to (____ptrval____) [ 3.422886] [drm:drm_atomic_check_only] checking (____ptrval____) [ 3.422888] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:65:eDP-1] [ 3.422891] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 3.422895] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 84 [ 3.422897] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 3.422901] [drm:drm_atomic_commit] committing (____ptrval____) [ 3.437331] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 3.437338] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 3.717512] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.719677] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 3.719680] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 3.720996] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.722411] ata6.00: supports DRM functions and may not be fully accessible [ 3.724599] ata6.00: ATA-10: Crucial_CT500MX200SSD3, MU04, max UDMA/133 [ 3.725977] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.731781] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 3.731795] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 3.733112] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.734486] ata6.00: supports DRM functions and may not be fully accessible [ 3.741210] ata6.00: configured for UDMA/133 [ 3.742809] scsi 5:0:0:0: Direct-Access ATA Crucial_CT500MX2 MU04 PQ: 0 ANSI: 5 [ 3.744177] ata6.00: Enabling discard_zeroes_data [ 3.744219] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 3.745410] sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 3.748343] sd 5:0:0:0: [sdb] 4096-byte physical blocks [ 3.749844] sd 5:0:0:0: [sdb] Write Protect is off [ 3.751329] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.751346] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.752945] ata6.00: Enabling discard_zeroes_data [ 3.756443] sdb: sdb1 [ 3.757991] ata6.00: Enabling discard_zeroes_data [ 3.759107] sd 5:0:0:0: [sdb] Attached SCSI disk [ 4.100816] Freeing unused kernel memory: 1312K [ 4.109128] Write protecting the kernel read-only data: 22528k [ 4.112212] Freeing unused kernel memory: 2016K [ 4.115184] Freeing unused kernel memory: 812K [ 4.123495] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.124594] x86/mm: Checking user space page tables [ 4.131560] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.182865] dracut: dracut-047 [ 4.316181] systemd-udevd (2010) used greatest stack depth: 14168 bytes left [ 4.388092] udevadm (2342) used greatest stack depth: 13928 bytes left [ 4.406146] BTRFS: device label Gentoo devid 1 transid 288742 /dev/sdb1 [ 4.420116] systemd-udevd (2418) used greatest stack depth: 13888 bytes left [ 4.421576] systemd-udevd (2430) used greatest stack depth: 13864 bytes left [ 4.436918] BTRFS info (device sdb1): use zlib compression, level 3 [ 4.438266] BTRFS info (device sdb1): enabling ssd optimizations [ 4.439308] BTRFS info (device sdb1): disk space caching is enabled [ 4.440316] BTRFS info (device sdb1): has skinny extents [ 4.546238] mount (3046) used greatest stack depth: 12728 bytes left [ 4.618440] dracut: Mounted root filesystem /dev/sdb1 [ 4.673000] dracut: Switching root [ 4.755924] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 4.755928] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] (____ptrval____) state to (____ptrval____) [ 4.755931] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] (____ptrval____) state to (____ptrval____) [ 4.755933] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] (____ptrval____) state to (____ptrval____) [ 4.755935] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 4.755938] [drm:drm_atomic_get_plane_state] Added [PLANE:36:cursor A] (____ptrval____) state to (____ptrval____) [ 4.755939] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 4.755941] [drm:drm_atomic_get_plane_state] Added [PLANE:40:primary B] (____ptrval____) state to (____ptrval____) [ 4.755943] [drm:drm_atomic_get_plane_state] Added [PLANE:43:sprite B] (____ptrval____) state to (____ptrval____) [ 4.755944] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 4.755946] [drm:drm_atomic_get_plane_state] Added [PLANE:48:cursor B] (____ptrval____) state to (____ptrval____) [ 4.755948] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 4.755950] [drm:drm_atomic_get_plane_state] Added [PLANE:52:primary C] (____ptrval____) state to (____ptrval____) [ 4.755952] [drm:drm_atomic_get_plane_state] Added [PLANE:55:sprite C] (____ptrval____) state to (____ptrval____) [ 4.755953] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 4.755955] [drm:drm_atomic_get_plane_state] Added [PLANE:60:cursor C] (____ptrval____) state to (____ptrval____) [ 4.755956] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 4.755960] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state (____ptrval____) [ 4.755962] [drm:drm_atomic_set_fb_for_plane] Set [FB:84] for plane state (____ptrval____) [ 4.755964] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:39:pipe A] to (____ptrval____) [ 4.755967] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:65:eDP-1] (____ptrval____) state to (____ptrval____) [ 4.755970] [drm:drm_atomic_set_crtc_for_connector] Link connector state (____ptrval____) to [NOCRTC] [ 4.755972] [drm:drm_atomic_set_crtc_for_connector] Link connector state (____ptrval____) to [CRTC:39:pipe A] [ 4.755974] [drm:drm_atomic_get_crtc_state] Added [CRTC:51:pipe B] (____ptrval____) state to (____ptrval____) [ 4.755976] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state (____ptrval____) [ 4.755977] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 4.755979] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:51:pipe B] to (____ptrval____) [ 4.755982] [drm:drm_atomic_get_crtc_state] Added [CRTC:63:pipe C] (____ptrval____) state to (____ptrval____) [ 4.755983] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state (____ptrval____) [ 4.755985] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 4.755987] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:63:pipe C] to (____ptrval____) [ 4.755988] [drm:drm_atomic_check_only] checking (____ptrval____) [ 4.755993] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:65:eDP-1] [ 4.755996] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 4.756002] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 84 [ 4.756013] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 4.756018] [drm:drm_atomic_commit] committing (____ptrval____) [ 4.770648] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 4.770657] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 4.776528] setfont (3149) used greatest stack depth: 12672 bytes left [ 4.779163] kbd_mode (3151) used greatest stack depth: 11952 bytes left [ 4.788185] init-early.sh (3147) used greatest stack depth: 11920 bytes left [ 5.514213] random: lvm: uninitialized urandom read (4 bytes read) [ 6.269704] random: ln: uninitialized urandom read (6 bytes read) [ 6.431040] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 6.431049] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007 [ 6.724628] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 6.724742] snd_hda_intel 0000:00:03.0: Applying patch firmware 'hda-jack-retask.fw' [ 6.724868] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 6.724971] snd_hda_intel 0000:00:1b.0: Applying patch firmware 'hda-jack-retask.fw' [ 6.725608] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops) [ 6.726116] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16) [ 6.728836] [drm:intel_power_well_enable] enabling display [ 6.760865] [drm:i915_audio_component_get_eld] Not valid for port B [ 6.760868] [drm:i915_audio_component_get_eld] Not valid for port B [ 6.760870] [drm:i915_audio_component_get_eld] Not valid for port B [ 6.760873] [drm:i915_audio_component_get_eld] Not valid for port C [ 6.760875] [drm:i915_audio_component_get_eld] Not valid for port C [ 6.760877] [drm:i915_audio_component_get_eld] Not valid for port C [ 6.760879] [drm:i915_audio_component_get_eld] Not valid for port D [ 6.760882] [drm:i915_audio_component_get_eld] Not valid for port D [ 6.760884] [drm:i915_audio_component_get_eld] Not valid for port D [ 6.761584] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 [ 6.761647] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17 [ 6.761703] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18 [ 6.761763] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19 [ 6.761819] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20 [ 6.762072] [drm:intel_power_well_disable] disabling display [ 6.762729] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.767720] r8169 0000:04:00.1 eth0: RTL8411, 80:fa:5b:0f:a5:74, XID 5c800800, IRQ 31 [ 6.767723] r8169 0000:04:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.768900] snd_hda_codec_via hdaudioC1D0: autoconfig for VT1802: line_outs=1 (0x24/0x0/0x0/0x0/0x0) type:speaker [ 6.768903] snd_hda_codec_via hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.768905] snd_hda_codec_via hdaudioC1D0: hp_outs=1 (0x25/0x0/0x0/0x0/0x0) [ 6.768906] snd_hda_codec_via hdaudioC1D0: mono: mono_out=0x0 [ 6.768907] snd_hda_codec_via hdaudioC1D0: inputs: [ 6.768909] snd_hda_codec_via hdaudioC1D0: Internal Mic=0x30 [ 6.768911] snd_hda_codec_via hdaudioC1D0: Mic=0x2b [ 6.773792] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.774731] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21 [ 6.775298] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input22 [ 6.775337] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23 [ 6.780096] AVX2 version of gcm_enc/dec engaged. [ 6.780097] AES CTR mode by8 optimization enabled [ 6.784427] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.826498] Intel(R) Wireless WiFi driver for Linux [ 6.826500] Copyright(c) 2003- 2015 Intel Corporation [ 6.826725] iwlwifi 0000:03:00.0: enabling device (0000 -> 0002) [ 6.836149] iwlwifi 0000:03:00.0: loaded firmware version 17.608620.0 op_mode iwlmvm [ 6.978073] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 7.003430] iwlwifi 0000:03:00.0: base HW address: ac:fd:ce:de:e1:58 [ 7.022600] intel_rapl: Found RAPL domain package [ 7.022602] intel_rapl: Found RAPL domain core [ 7.022603] intel_rapl: Found RAPL domain uncore [ 7.022604] intel_rapl: Found RAPL domain dram [ 7.055082] Bluetooth: Core ver 2.22 [ 7.055106] NET: Registered protocol family 31 [ 7.055107] Bluetooth: HCI device and connection manager initialized [ 7.055111] Bluetooth: HCI socket layer initialized [ 7.055113] Bluetooth: L2CAP socket layer initialized [ 7.055119] Bluetooth: SCO socket layer initialized [ 7.076268] usbcore: registered new interface driver btusb [ 7.084130] media: Linux media interface: v0.10 [ 7.090068] Bluetooth: hci0: read Intel version: 3707100180012d0d27 [ 7.090070] Bluetooth: hci0: Intel device is already patched. patch num: 27 [ 7.097638] videodev: Linux video capture interface: v2.00 [ 7.115105] random: alsactl: uninitialized urandom read (4 bytes read) [ 7.115352] random: alsactl: uninitialized urandom read (4 bytes read) [ 7.127579] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:055c) [ 7.133410] uvcvideo 3-8:1.0: Entity type for entity Extension 4 was not initialized! [ 7.133413] uvcvideo 3-8:1.0: Entity type for entity Processing 2 was not initialized! [ 7.133414] uvcvideo 3-8:1.0: Entity type for entity Camera 1 was not initialized! [ 7.133495] input: BisonCam, NB Pro: BisonCam, NB as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/input/input24 [ 7.133564] usbcore: registered new interface driver uvcvideo [ 7.133565] USB Video Class driver (1.1.1) [ 7.223207] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 7.672981] [drm:intel_power_well_enable] enabling display [ 7.675871] [drm:i915_audio_component_get_eld] Not valid for port B [ 7.675874] [drm:i915_audio_component_get_eld] Not valid for port B [ 7.675876] [drm:i915_audio_component_get_eld] Not valid for port B [ 7.675879] [drm:i915_audio_component_get_eld] Not valid for port C [ 7.675882] [drm:i915_audio_component_get_eld] Not valid for port C [ 7.675884] [drm:i915_audio_component_get_eld] Not valid for port C [ 7.675886] [drm:i915_audio_component_get_eld] Not valid for port D [ 7.675889] [drm:i915_audio_component_get_eld] Not valid for port D [ 7.675891] [drm:i915_audio_component_get_eld] Not valid for port D [ 7.925699] random: lvm: uninitialized urandom read (4 bytes read) [ 8.347255] random: lvm: uninitialized urandom read (4 bytes read) [ 8.505732] BTRFS info (device sdb1): disk space caching is enabled [ 8.575166] random: ln: uninitialized urandom read (6 bytes read) [ 8.986463] random: mktemp: uninitialized urandom read (10 bytes read) [ 9.129295] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 9.129299] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] (____ptrval____) state to (____ptrval____) [ 9.129302] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] (____ptrval____) state to (____ptrval____) [ 9.129305] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] (____ptrval____) state to (____ptrval____) [ 9.129307] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 9.129309] [drm:drm_atomic_get_plane_state] Added [PLANE:36:cursor A] (____ptrval____) state to (____ptrval____) [ 9.129311] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 9.129313] [drm:drm_atomic_get_plane_state] Added [PLANE:40:primary B] (____ptrval____) state to (____ptrval____) [ 9.129315] [drm:drm_atomic_get_plane_state] Added [PLANE:43:sprite B] (____ptrval____) state to (____ptrval____) [ 9.129316] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 9.129319] [drm:drm_atomic_get_plane_state] Added [PLANE:48:cursor B] (____ptrval____) state to (____ptrval____) [ 9.129320] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 9.129322] [drm:drm_atomic_get_plane_state] Added [PLANE:52:primary C] (____ptrval____) state to (____ptrval____) [ 9.129324] [drm:drm_atomic_get_plane_state] Added [PLANE:55:sprite C] (____ptrval____) state to (____ptrval____) [ 9.129325] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 9.129328] [drm:drm_atomic_get_plane_state] Added [PLANE:60:cursor C] (____ptrval____) state to (____ptrval____) [ 9.129329] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 9.129333] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state (____ptrval____) [ 9.129335] [drm:drm_atomic_set_fb_for_plane] Set [FB:84] for plane state (____ptrval____) [ 9.129337] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:39:pipe A] to (____ptrval____) [ 9.129340] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:65:eDP-1] (____ptrval____) state to (____ptrval____) [ 9.129343] [drm:drm_atomic_set_crtc_for_connector] Link connector state (____ptrval____) to [NOCRTC] [ 9.129345] [drm:drm_atomic_set_crtc_for_connector] Link connector state (____ptrval____) to [CRTC:39:pipe A] [ 9.129347] [drm:drm_atomic_get_crtc_state] Added [CRTC:51:pipe B] (____ptrval____) state to (____ptrval____) [ 9.129349] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state (____ptrval____) [ 9.129351] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 9.129353] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:51:pipe B] to (____ptrval____) [ 9.129355] [drm:drm_atomic_get_crtc_state] Added [CRTC:63:pipe C] (____ptrval____) state to (____ptrval____) [ 9.129357] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state (____ptrval____) [ 9.129358] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 9.129360] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:63:pipe C] to (____ptrval____) [ 9.129362] [drm:drm_atomic_check_only] checking (____ptrval____) [ 9.129367] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:65:eDP-1] [ 9.129370] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 9.129376] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 84 [ 9.129378] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 9.129383] [drm:drm_atomic_commit] committing (____ptrval____) [ 9.137208] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 9.137215] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 9.242722] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 9.953524] random: dd: uninitialized urandom read (512 bytes read) [ 9.998269] zram: Added device: zram0 [ 9.998390] zram: Added device: zram1 [ 9.998517] zram: Added device: zram2 [ 10.014335] zram0: detected capacity change from 0 to 4294967296 [ 10.803611] systemd-udevd (4058) used greatest stack depth: 11888 bytes left [ 11.055833] Adding 4194300k swap on /dev/zram0. Priority:16383 extents:1 across:4194300k SSDscFS [ 11.081342] zram1: detected capacity change from 0 to 25769803776 [ 13.523669] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard,discard [ 13.549817] zram2: detected capacity change from 0 to 25769803776 [ 15.984206] EXT4-fs (zram2): mounted filesystem without journal. Opts: discard,discard [ 16.123144] random: dbus-daemon: uninitialized urandom read (12 bytes read) [ 16.488978] NetworkManager (13698) used greatest stack depth: 11768 bytes left [ 16.754054] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.786545] r8169 0000:04:00.1 eth0: No native access to PCI extended config space, falling back to CSI [ 16.788132] r8169 0000:04:00.1 eth0: link down [ 16.788204] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.817399] 8021q: 802.1Q VLAN Support v1.8 [ 16.826234] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.077346] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.350749] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.365261] IPv6: ADDRCONF(NETDEV_UP): eth0.165: link is not ready [ 17.365376] IPv6: ADDRCONF(NETDEV_UP): eth0.165: link is not ready [ 17.366254] IPv6: ADDRCONF(NETDEV_UP): eth0.4092: link is not ready [ 17.366368] IPv6: ADDRCONF(NETDEV_UP): eth0.4092: link is not ready [ 17.423819] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 19.066831] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.066835] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] (____ptrval____) state to (____ptrval____) [ 19.066838] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] (____ptrval____) state to (____ptrval____) [ 19.066840] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] (____ptrval____) state to (____ptrval____) [ 19.066842] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.066844] [drm:drm_atomic_get_plane_state] Added [PLANE:36:cursor A] (____ptrval____) state to (____ptrval____) [ 19.066846] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.066848] [drm:drm_atomic_get_plane_state] Added [PLANE:40:primary B] (____ptrval____) state to (____ptrval____) [ 19.066850] [drm:drm_atomic_get_plane_state] Added [PLANE:43:sprite B] (____ptrval____) state to (____ptrval____) [ 19.066852] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.066854] [drm:drm_atomic_get_plane_state] Added [PLANE:48:cursor B] (____ptrval____) state to (____ptrval____) [ 19.066855] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.066857] [drm:drm_atomic_get_plane_state] Added [PLANE:52:primary C] (____ptrval____) state to (____ptrval____) [ 19.066859] [drm:drm_atomic_get_plane_state] Added [PLANE:55:sprite C] (____ptrval____) state to (____ptrval____) [ 19.066861] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.066863] [drm:drm_atomic_get_plane_state] Added [PLANE:60:cursor C] (____ptrval____) state to (____ptrval____) [ 19.066864] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.066868] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state (____ptrval____) [ 19.066870] [drm:drm_atomic_set_fb_for_plane] Set [FB:84] for plane state (____ptrval____) [ 19.066872] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:39:pipe A] to (____ptrval____) [ 19.066876] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:65:eDP-1] (____ptrval____) state to (____ptrval____) [ 19.066878] [drm:drm_atomic_set_crtc_for_connector] Link connector state (____ptrval____) to [NOCRTC] [ 19.066880] [drm:drm_atomic_set_crtc_for_connector] Link connector state (____ptrval____) to [CRTC:39:pipe A] [ 19.066883] [drm:drm_atomic_get_crtc_state] Added [CRTC:51:pipe B] (____ptrval____) state to (____ptrval____) [ 19.066885] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state (____ptrval____) [ 19.066886] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.066888] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:51:pipe B] to (____ptrval____) [ 19.066891] [drm:drm_atomic_get_crtc_state] Added [CRTC:63:pipe C] (____ptrval____) state to (____ptrval____) [ 19.066892] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state (____ptrval____) [ 19.066894] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.066896] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:63:pipe C] to (____ptrval____) [ 19.066898] [drm:drm_atomic_check_only] checking (____ptrval____) [ 19.066903] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:65:eDP-1] [ 19.066905] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 19.066912] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 84 [ 19.066914] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 19.066919] [drm:drm_atomic_commit] committing (____ptrval____) [ 19.070377] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.070382] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.092538] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.092542] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] (____ptrval____) state to (____ptrval____) [ 19.092544] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] (____ptrval____) state to (____ptrval____) [ 19.092546] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] (____ptrval____) state to (____ptrval____) [ 19.092548] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.092550] [drm:drm_atomic_get_plane_state] Added [PLANE:36:cursor A] (____ptrval____) state to (____ptrval____) [ 19.092551] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.092553] [drm:drm_atomic_get_plane_state] Added [PLANE:40:primary B] (____ptrval____) state to (____ptrval____) [ 19.092555] [drm:drm_atomic_get_plane_state] Added [PLANE:43:sprite B] (____ptrval____) state to (____ptrval____) [ 19.092556] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.092558] [drm:drm_atomic_get_plane_state] Added [PLANE:48:cursor B] (____ptrval____) state to (____ptrval____) [ 19.092559] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.092561] [drm:drm_atomic_get_plane_state] Added [PLANE:52:primary C] (____ptrval____) state to (____ptrval____) [ 19.092563] [drm:drm_atomic_get_plane_state] Added [PLANE:55:sprite C] (____ptrval____) state to (____ptrval____) [ 19.092564] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.092566] [drm:drm_atomic_get_plane_state] Added [PLANE:60:cursor C] (____ptrval____) state to (____ptrval____) [ 19.092567] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.092571] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state (____ptrval____) [ 19.092573] [drm:drm_atomic_set_fb_for_plane] Set [FB:84] for plane state (____ptrval____) [ 19.092575] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:39:pipe A] to (____ptrval____) [ 19.092578] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:65:eDP-1] (____ptrval____) state to (____ptrval____) [ 19.092580] [drm:drm_atomic_set_crtc_for_connector] Link connector state (____ptrval____) to [NOCRTC] [ 19.092582] [drm:drm_atomic_set_crtc_for_connector] Link connector state (____ptrval____) to [CRTC:39:pipe A] [ 19.092584] [drm:drm_atomic_get_crtc_state] Added [CRTC:51:pipe B] (____ptrval____) state to (____ptrval____) [ 19.092586] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state (____ptrval____) [ 19.092587] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.092589] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:51:pipe B] to (____ptrval____) [ 19.092591] [drm:drm_atomic_get_crtc_state] Added [CRTC:63:pipe C] (____ptrval____) state to (____ptrval____) [ 19.092592] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state (____ptrval____) [ 19.092594] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.092595] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:63:pipe C] to (____ptrval____) [ 19.092597] [drm:drm_atomic_check_only] checking (____ptrval____) [ 19.092602] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:65:eDP-1] [ 19.092604] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 19.092609] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 84 [ 19.092611] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 19.092616] [drm:drm_atomic_commit] committing (____ptrval____) [ 19.103744] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.103752] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.108027] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.108033] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] (____ptrval____) state to (____ptrval____) [ 19.108036] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] (____ptrval____) state to (____ptrval____) [ 19.108038] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] (____ptrval____) state to (____ptrval____) [ 19.108040] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.108041] [drm:drm_atomic_get_plane_state] Added [PLANE:36:cursor A] (____ptrval____) state to (____ptrval____) [ 19.108043] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.108047] [drm:drm_atomic_get_plane_state] Added [PLANE:40:primary B] (____ptrval____) state to (____ptrval____) [ 19.108049] [drm:drm_atomic_get_plane_state] Added [PLANE:43:sprite B] (____ptrval____) state to (____ptrval____) [ 19.108050] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.108052] [drm:drm_atomic_get_plane_state] Added [PLANE:48:cursor B] (____ptrval____) state to (____ptrval____) [ 19.108054] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.108056] [drm:drm_atomic_get_plane_state] Added [PLANE:52:primary C] (____ptrval____) state to (____ptrval____) [ 19.108058] [drm:drm_atomic_get_plane_state] Added [PLANE:55:sprite C] (____ptrval____) state to (____ptrval____) [ 19.108059] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.108061] [drm:drm_atomic_get_plane_state] Added [PLANE:60:cursor C] (____ptrval____) state to (____ptrval____) [ 19.108062] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.108066] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state (____ptrval____) [ 19.108068] [drm:drm_atomic_set_fb_for_plane] Set [FB:84] for plane state (____ptrval____) [ 19.108070] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:39:pipe A] to (____ptrval____) [ 19.108073] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:65:eDP-1] (____ptrval____) state to (____ptrval____) [ 19.108075] [drm:drm_atomic_set_crtc_for_connector] Link connector state (____ptrval____) to [NOCRTC] [ 19.108077] [drm:drm_atomic_set_crtc_for_connector] Link connector state (____ptrval____) to [CRTC:39:pipe A] [ 19.108079] [drm:drm_atomic_get_crtc_state] Added [CRTC:51:pipe B] (____ptrval____) state to (____ptrval____) [ 19.108081] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state (____ptrval____) [ 19.108082] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.108084] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:51:pipe B] to (____ptrval____) [ 19.108087] [drm:drm_atomic_get_crtc_state] Added [CRTC:63:pipe C] (____ptrval____) state to (____ptrval____) [ 19.108089] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state (____ptrval____) [ 19.108090] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.108091] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:63:pipe C] to (____ptrval____) [ 19.108093] [drm:drm_atomic_check_only] checking (____ptrval____) [ 19.108098] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:65:eDP-1] [ 19.108100] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 19.108106] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 84 [ 19.108108] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 19.108112] [drm:drm_atomic_commit] committing (____ptrval____) [ 19.120380] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.120391] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.120596] [drm:drm_mode_addfb2] [FB:83] [ 19.181729] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:eDP-1] [ 19.181735] [drm:intel_dp_detect] [CONNECTOR:65:eDP-1] [ 19.181741] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000 [ 19.181743] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 19.181745] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 19.181751] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 19.181760] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f [ 19.182156] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 19.182460] [drm:drm_add_display_info] non_desktop set to 0 [ 19.182466] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 19.182468] [drm:drm_add_display_info] non_desktop set to 0 [ 19.182516] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:eDP-1] probed modes : [ 19.182521] [drm:drm_mode_debug_printmodeline] Modeline 66:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 19.182526] [drm:drm_mode_debug_printmodeline] Modeline 67:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 19.182611] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:DP-1] [ 19.182614] [drm:intel_dp_detect] [CONNECTOR:73:DP-1] [ 19.182619] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:DP-1] disconnected [ 19.182678] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] [ 19.182680] [drm:intel_hdmi_detect] [CONNECTOR:80:HDMI-A-1] [ 19.182850] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 19.182851] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 19.183018] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 19.183022] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 19.183024] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 19.183026] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 19.183772] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 19.183776] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 19.183952] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 19.183953] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 19.184119] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 19.184122] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 19.184125] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected [ 19.184220] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.184224] [drm:drm_atomic_get_plane_state] Added [PLANE:36:cursor A] (____ptrval____) state to (____ptrval____) [ 19.184226] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.184228] [drm:drm_atomic_check_only] checking (____ptrval____) [ 19.184233] [drm:drm_atomic_commit] committing (____ptrval____) [ 19.184251] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.184253] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.184266] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.184269] [drm:drm_atomic_get_plane_state] Added [PLANE:48:cursor B] (____ptrval____) state to (____ptrval____) [ 19.184271] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.184273] [drm:drm_atomic_check_only] checking (____ptrval____) [ 19.184276] [drm:drm_atomic_commit] committing (____ptrval____) [ 19.184287] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.184289] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.184300] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.184303] [drm:drm_atomic_get_plane_state] Added [PLANE:60:cursor C] (____ptrval____) state to (____ptrval____) [ 19.184305] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state (____ptrval____) [ 19.184307] [drm:drm_atomic_check_only] checking (____ptrval____) [ 19.184310] [drm:drm_atomic_commit] committing (____ptrval____) [ 19.184319] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.184322] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.184336] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:eDP-1] [ 19.184340] [drm:intel_dp_detect] [CONNECTOR:65:eDP-1] [ 19.184344] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000 [ 19.184346] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 19.184348] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 19.184744] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 19.185047] [drm:drm_add_display_info] non_desktop set to 0 [ 19.185056] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 19.185060] [drm:drm_add_display_info] non_desktop set to 0 [ 19.185109] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:65:eDP-1] probed modes : [ 19.185114] [drm:drm_mode_debug_printmodeline] Modeline 66:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 19.185119] [drm:drm_mode_debug_printmodeline] Modeline 67:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 19.185846] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:DP-1] [ 19.185850] [drm:intel_dp_detect] [CONNECTOR:73:DP-1] [ 19.185854] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:DP-1] disconnected [ 19.185871] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] [ 19.185872] [drm:intel_hdmi_detect] [CONNECTOR:80:HDMI-A-1] [ 19.186037] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 19.186039] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 19.186191] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 19.186195] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 19.186197] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 19.186200] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 19.186949] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 19.186952] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 19.187129] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 19.187131] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 19.187331] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 19.187336] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 19.187339] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected [ 19.198538] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 19.198539] Bluetooth: BNEP filters: protocol multicast [ 19.198543] Bluetooth: BNEP socket layer initialized [ 19.200060] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.200064] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:65:eDP-1] (____ptrval____) state to (____ptrval____) [ 19.200067] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] (____ptrval____) state to (____ptrval____) [ 19.200069] [drm:drm_atomic_check_only] checking (____ptrval____) [ 19.200073] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:65:eDP-1] [ 19.200075] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 19.200080] [drm:drm_atomic_commit] committing (____ptrval____) [ 19.203685] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.203688] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.203699] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.203700] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.203701] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.203707] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.203709] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:65:eDP-1] (____ptrval____) state to (____ptrval____) [ 19.203711] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] (____ptrval____) state to (____ptrval____) [ 19.203713] [drm:drm_atomic_check_only] checking (____ptrval____) [ 19.203716] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:65:eDP-1] [ 19.203718] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 19.203722] [drm:drm_atomic_commit] committing (____ptrval____) [ 19.220363] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.220367] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.220384] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.220388] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:65:eDP-1] (____ptrval____) state to (____ptrval____) [ 19.220390] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] (____ptrval____) state to (____ptrval____) [ 19.220392] [drm:drm_atomic_check_only] checking (____ptrval____) [ 19.220397] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:65:eDP-1] [ 19.220399] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 19.220404] [drm:drm_atomic_commit] committing (____ptrval____) [ 19.237037] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.237042] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.237081] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.237085] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:73:DP-1] (____ptrval____) state to (____ptrval____) [ 19.237087] [drm:drm_atomic_check_only] checking (____ptrval____) [ 19.237091] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:73:DP-1] [ 19.237092] [drm:drm_atomic_helper_check_modeset] Disabling [CONNECTOR:73:DP-1] [ 19.237095] [drm:drm_atomic_commit] committing (____ptrval____) [ 19.237102] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.237104] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.237109] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.237111] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.237112] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.237118] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.237121] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:73:DP-1] (____ptrval____) state to (____ptrval____) [ 19.237123] [drm:drm_atomic_check_only] checking (____ptrval____) [ 19.237124] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:73:DP-1] [ 19.237126] [drm:drm_atomic_helper_check_modeset] Disabling [CONNECTOR:73:DP-1] [ 19.237128] [drm:drm_atomic_commit] committing (____ptrval____) [ 19.237131] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.237133] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.237137] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.237140] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:73:DP-1] (____ptrval____) state to (____ptrval____) [ 19.237141] [drm:drm_atomic_check_only] checking (____ptrval____) [ 19.237143] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:73:DP-1] [ 19.237144] [drm:drm_atomic_helper_check_modeset] Disabling [CONNECTOR:73:DP-1] [ 19.237146] [drm:drm_atomic_commit] committing (____ptrval____) [ 19.237149] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.237151] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.237155] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.237157] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:73:DP-1] (____ptrval____) state to (____ptrval____) [ 19.237159] [drm:drm_atomic_check_only] checking (____ptrval____) [ 19.237161] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:73:DP-1] [ 19.237162] [drm:drm_atomic_helper_check_modeset] Disabling [CONNECTOR:73:DP-1] [ 19.237164] [drm:drm_atomic_commit] committing (____ptrval____) [ 19.237166] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.237168] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.237194] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.237197] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:80:HDMI-A-1] (____ptrval____) state to (____ptrval____) [ 19.237200] [drm:drm_atomic_check_only] checking (____ptrval____) [ 19.237202] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:80:HDMI-A-1] [ 19.237204] [drm:drm_atomic_helper_check_modeset] Disabling [CONNECTOR:80:HDMI-A-1] [ 19.237207] [drm:drm_atomic_commit] committing (____ptrval____) [ 19.237211] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.237213] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.237219] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.237221] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.237223] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.237230] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.237233] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:80:HDMI-A-1] (____ptrval____) state to (____ptrval____) [ 19.237235] [drm:drm_atomic_check_only] checking (____ptrval____) [ 19.237238] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:80:HDMI-A-1] [ 19.237240] [drm:drm_atomic_helper_check_modeset] Disabling [CONNECTOR:80:HDMI-A-1] [ 19.237242] [drm:drm_atomic_commit] committing (____ptrval____) [ 19.237246] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.237249] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.237255] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.237258] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:80:HDMI-A-1] (____ptrval____) state to (____ptrval____) [ 19.237260] [drm:drm_atomic_check_only] checking (____ptrval____) [ 19.237263] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:80:HDMI-A-1] [ 19.237265] [drm:drm_atomic_helper_check_modeset] Disabling [CONNECTOR:80:HDMI-A-1] [ 19.237267] [drm:drm_atomic_commit] committing (____ptrval____) [ 19.237271] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.237274] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.237280] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.237283] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:80:HDMI-A-1] (____ptrval____) state to (____ptrval____) [ 19.237286] [drm:drm_atomic_check_only] checking (____ptrval____) [ 19.237288] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:80:HDMI-A-1] [ 19.237290] [drm:drm_atomic_helper_check_modeset] Disabling [CONNECTOR:80:HDMI-A-1] [ 19.237292] [drm:drm_atomic_commit] committing (____ptrval____) [ 19.237296] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.237299] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.237305] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.237308] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:80:HDMI-A-1] (____ptrval____) state to (____ptrval____) [ 19.237310] [drm:drm_atomic_check_only] checking (____ptrval____) [ 19.237313] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:80:HDMI-A-1] [ 19.237315] [drm:drm_atomic_helper_check_modeset] Disabling [CONNECTOR:80:HDMI-A-1] [ 19.237317] [drm:drm_atomic_commit] committing (____ptrval____) [ 19.237321] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.237323] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.406603] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.406608] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] (____ptrval____) state to (____ptrval____) [ 19.406610] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:39:pipe A] to (____ptrval____) [ 19.406613] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:65:eDP-1] (____ptrval____) state to (____ptrval____) [ 19.406616] [drm:drm_atomic_check_only] checking (____ptrval____) [ 19.406620] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:65:eDP-1] [ 19.406622] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 19.406628] [drm:drm_atomic_commit] committing (____ptrval____) [ 19.420352] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.420355] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.420510] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.420515] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] (____ptrval____) state to (____ptrval____) [ 19.420516] [drm:drm_atomic_check_only] checking (____ptrval____) [ 19.420521] [drm:drm_atomic_commit] committing (____ptrval____) [ 19.437025] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.437028] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.437071] [drm:drm_mode_addfb2] [FB:87] [ 19.437076] [drm:drm_mode_setcrtc] [CRTC:39:pipe A] [ 19.437081] [drm:drm_mode_setcrtc] [CONNECTOR:65:eDP-1] [ 19.437084] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.437086] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] (____ptrval____) state to (____ptrval____) [ 19.437089] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] (____ptrval____) state to (____ptrval____) [ 19.437092] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:] for CRTC state (____ptrval____) [ 19.437094] [drm:drm_atomic_set_fb_for_plane] Set [FB:87] for plane state (____ptrval____) [ 19.437096] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:39:pipe A] to (____ptrval____) [ 19.437099] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:65:eDP-1] (____ptrval____) state to (____ptrval____) [ 19.437101] [drm:drm_atomic_set_crtc_for_connector] Link connector state (____ptrval____) to [NOCRTC] [ 19.437104] [drm:drm_atomic_set_crtc_for_connector] Link connector state (____ptrval____) to [CRTC:39:pipe A] [ 19.437106] [drm:drm_atomic_check_only] checking (____ptrval____) [ 19.437110] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:65:eDP-1] [ 19.437112] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 19.437118] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 87 [ 19.437120] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 19.437123] [drm:drm_atomic_commit] committing (____ptrval____) [ 19.453707] [drm:drm_atomic_state_default_clear] Clearing atomic state (____ptrval____) [ 19.453710] [drm:__drm_atomic_state_free] Freeing atomic state (____ptrval____) [ 19.453723] [drm:drm_atomic_state_init] Allocated atomic state (____ptrval____) [ 19.453725] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] (____ptrval____) state to (____ptrval____) [ 19.453727] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:39:pipe A] to (____ptrval____) [ 19.453729] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:65:eDP-1] (____ptrval____) state to (____ptrval____) [ 19.453730] [drm:drm_atomic_check_only] checking (____ptrval____) [ 19.453733] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:65:eDP-1] [ 19.453734] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 19.453737] [drm:drm_atomic_commit] committing (____ptrval____) [ 19.458952] random: crng init done [ 19.470377] [drm:drm_atomic_state_default_clear] Clearing atomic state 000000009026290a [ 19.470381] [drm:__drm_atomic_state_free] Freeing atomic state 000000009026290a [ 19.470391] [drm:drm_mode_setcrtc] [CRTC:51:pipe B] [ 19.470395] [drm:drm_atomic_state_init] Allocated atomic state 000000009026290a [ 19.470398] [drm:drm_atomic_get_crtc_state] Added [CRTC:51:pipe B] 000000003d8ee8d3 state to 000000009026290a [ 19.470402] [drm:drm_atomic_get_plane_state] Added [PLANE:40:primary B] 00000000010ee534 state to 000000009026290a [ 19.470404] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 000000003d8ee8d3 [ 19.470406] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000010ee534 [ 19.470409] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:51:pipe B] to 000000009026290a [ 19.470411] [drm:drm_atomic_check_only] checking 000000009026290a [ 19.470416] [drm:drm_atomic_commit] committing 000000009026290a [ 19.470430] [drm:drm_atomic_state_default_clear] Clearing atomic state 000000009026290a [ 19.470433] [drm:__drm_atomic_state_free] Freeing atomic state 000000009026290a [ 19.470438] [drm:drm_mode_setcrtc] [CRTC:63:pipe C] [ 19.470441] [drm:drm_atomic_state_init] Allocated atomic state 000000009026290a [ 19.470444] [drm:drm_atomic_get_crtc_state] Added [CRTC:63:pipe C] 000000005230c938 state to 000000009026290a [ 19.470447] [drm:drm_atomic_get_plane_state] Added [PLANE:52:primary C] 0000000038c66051 state to 000000009026290a [ 19.470449] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 000000005230c938 [ 19.470451] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000038c66051 [ 19.470453] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:63:pipe C] to 000000009026290a [ 19.470456] [drm:drm_atomic_check_only] checking 000000009026290a [ 19.470459] [drm:drm_atomic_commit] committing 000000009026290a [ 19.470467] [drm:drm_atomic_state_default_clear] Clearing atomic state 000000009026290a [ 19.470470] [drm:__drm_atomic_state_free] Freeing atomic state 000000009026290a [ 19.474236] [drm:drm_atomic_state_init] Allocated atomic state 00000000e75d0c6d [ 19.474240] [drm:drm_atomic_get_plane_state] Added [PLANE:36:cursor A] 000000007b946227 state to 00000000e75d0c6d [ 19.474244] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] 0000000074a4ca11 state to 00000000e75d0c6d [ 19.474246] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000007b946227 to [CRTC:39:pipe A] [ 19.474248] [drm:drm_atomic_set_fb_for_plane] Set [FB:85] for plane state 000000007b946227 [ 19.474250] [drm:drm_atomic_check_only] checking 00000000e75d0c6d [ 19.474256] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:36:cursor A] with fb 85 [ 19.474259] [drm:intel_plane_atomic_calc_changes] [PLANE:36:cursor A] visible 0 -> 1, off 0, on 1, ms 0 [ 19.474264] [drm:drm_atomic_commit] committing 00000000e75d0c6d [ 19.474412] [drm:drm_atomic_state_default_clear] Clearing atomic state 00000000e75d0c6d [ 19.474415] [drm:__drm_atomic_state_free] Freeing atomic state 00000000e75d0c6d [ 19.474421] [drm:drm_atomic_state_init] Allocated atomic state 00000000e75d0c6d [ 19.474423] [drm:drm_atomic_get_plane_state] Added [PLANE:36:cursor A] 000000006d4da24d state to 00000000e75d0c6d [ 19.474426] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] 000000004ec362f1 state to 00000000e75d0c6d [ 19.474428] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000006d4da24d to [NOCRTC] [ 19.474430] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000006d4da24d [ 19.474432] [drm:drm_atomic_check_only] checking 00000000e75d0c6d [ 19.474436] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:36:cursor A] with fb -1 [ 19.474438] [drm:intel_plane_atomic_calc_changes] [PLANE:36:cursor A] visible 1 -> 0, off 1, on 0, ms 0 [ 19.474441] [drm:drm_atomic_commit] committing 00000000e75d0c6d [ 19.487048] [drm:drm_atomic_state_default_clear] Clearing atomic state 00000000e75d0c6d [ 19.487052] [drm:__drm_atomic_state_free] Freeing atomic state 00000000e75d0c6d [ 19.487069] [drm:drm_atomic_state_init] Allocated atomic state 00000000e75d0c6d [ 19.487072] [drm:drm_atomic_get_plane_state] Added [PLANE:36:cursor A] 000000007b946227 state to 00000000e75d0c6d [ 19.487074] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000007b946227 [ 19.487076] [drm:drm_atomic_check_only] checking 00000000e75d0c6d [ 19.487079] [drm:drm_atomic_commit] committing 00000000e75d0c6d [ 19.487092] [drm:drm_atomic_state_default_clear] Clearing atomic state 00000000e75d0c6d [ 19.487095] [drm:__drm_atomic_state_free] Freeing atomic state 00000000e75d0c6d [ 19.487103] [drm:drm_atomic_state_init] Allocated atomic state 00000000e75d0c6d [ 19.487105] [drm:drm_atomic_get_plane_state] Added [PLANE:36:cursor A] 000000006d4da24d state to 00000000e75d0c6d [ 19.487108] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] 0000000074a4ca11 state to 00000000e75d0c6d [ 19.487111] [drm:drm_atomic_set_crtc_for_plane] Link plane state 000000006d4da24d to [CRTC:39:pipe A] [ 19.487113] [drm:drm_atomic_set_fb_for_plane] Set [FB:85] for plane state 000000006d4da24d [ 19.487115] [drm:drm_atomic_check_only] checking 00000000e75d0c6d [ 19.487120] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:36:cursor A] with fb 85 [ 19.487122] [drm:intel_plane_atomic_calc_changes] [PLANE:36:cursor A] visible 0 -> 1, off 0, on 1, ms 0 [ 19.487126] [drm:drm_atomic_commit] committing 00000000e75d0c6d [ 19.487142] [drm:drm_atomic_state_default_clear] Clearing atomic state 00000000e75d0c6d [ 19.487145] [drm:__drm_atomic_state_free] Freeing atomic state 00000000e75d0c6d [ 20.773429] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.883477] [drm:drm_mode_addfb2] [FB:88] [ 20.883490] [drm:drm_atomic_state_init] Allocated atomic state 00000000d060f46e [ 20.883495] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] 000000005a01fa91 state to 00000000d060f46e [ 20.883498] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 00000000f86f0cdf state to 00000000d060f46e [ 20.883500] [drm:drm_atomic_set_fb_for_plane] Set [FB:88] for plane state 00000000f86f0cdf [ 20.883502] [drm:drm_atomic_check_only] checking 00000000d060f46e [ 20.883510] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 88 [ 20.883512] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 20.883517] [drm:drm_atomic_nonblocking_commit] committing 00000000d060f46e nonblocking [ 20.903731] [drm:drm_atomic_state_default_clear] Clearing atomic state 00000000d060f46e [ 20.903737] [drm:__drm_atomic_state_free] Freeing atomic state 00000000d060f46e [ 20.903790] [drm:drm_mode_addfb2] [FB:90] [ 20.903799] [drm:drm_atomic_state_init] Allocated atomic state 0000000052bbee0d [ 20.903802] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] 00000000da60dbcd state to 0000000052bbee0d [ 20.903805] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 00000000b32eb817 state to 0000000052bbee0d [ 20.903807] [drm:drm_atomic_set_fb_for_plane] Set [FB:90] for plane state 00000000b32eb817 [ 20.903809] [drm:drm_atomic_check_only] checking 0000000052bbee0d [ 20.903816] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 90 [ 20.903818] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 20.903823] [drm:drm_atomic_nonblocking_commit] committing 0000000052bbee0d nonblocking [ 20.920383] [drm:drm_atomic_state_default_clear] Clearing atomic state 0000000052bbee0d [ 20.920389] [drm:__drm_atomic_state_free] Freeing atomic state 0000000052bbee0d [ 20.921640] [drm:drm_mode_addfb2] [FB:87] [ 20.921648] [drm:drm_atomic_state_init] Allocated atomic state 000000009fa2546c [ 20.921652] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] 000000007bcf979d state to 000000009fa2546c [ 20.921654] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 000000002191bb79 state to 000000009fa2546c [ 20.921657] [drm:drm_atomic_set_fb_for_plane] Set [FB:87] for plane state 000000002191bb79 [ 20.921659] [drm:drm_atomic_check_only] checking 000000009fa2546c [ 20.921666] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 87 [ 20.921668] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 20.921673] [drm:drm_atomic_nonblocking_commit] committing 000000009fa2546c nonblocking [ 20.937085] [drm:drm_atomic_state_default_clear] Clearing atomic state 000000009fa2546c [ 20.937091] [drm:__drm_atomic_state_free] Freeing atomic state 000000009fa2546c [ 20.937148] [drm:drm_mode_addfb2] [FB:88] [ 20.937156] [drm:drm_atomic_state_init] Allocated atomic state 0000000096c2382a [ 20.937160] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] 000000009fa2546c state to 0000000096c2382a [ 20.937163] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 00000000c0707da7 state to 0000000096c2382a [ 20.937165] [drm:drm_atomic_set_fb_for_plane] Set [FB:88] for plane state 00000000c0707da7 [ 20.937167] [drm:drm_atomic_check_only] checking 0000000096c2382a [ 20.937174] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 88 [ 20.937176] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 20.937181] [drm:drm_atomic_nonblocking_commit] committing 0000000096c2382a nonblocking [ 20.953744] [drm:drm_atomic_state_default_clear] Clearing atomic state 0000000096c2382a [ 20.953752] [drm:__drm_atomic_state_free] Freeing atomic state 0000000096c2382a [ 20.953820] [drm:drm_mode_addfb2] [FB:90] [ 20.953833] [drm:drm_atomic_state_init] Allocated atomic state 00000000b8628207 [ 20.953838] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] 0000000064182145 state to 00000000b8628207 [ 20.953842] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 0000000056db0b6d state to 00000000b8628207 [ 20.953845] [drm:drm_atomic_set_fb_for_plane] Set [FB:90] for plane state 0000000056db0b6d [ 20.953848] [drm:drm_atomic_check_only] checking 00000000b8628207 [ 20.953857] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 90 [ 20.953860] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 20.953868] [drm:drm_atomic_nonblocking_commit] committing 00000000b8628207 nonblocking [ 20.970425] [drm:drm_atomic_state_default_clear] Clearing atomic state 00000000b8628207 [ 20.970434] [drm:__drm_atomic_state_free] Freeing atomic state 00000000b8628207 [ 20.970514] [drm:drm_mode_addfb2] [FB:87] [ 20.970526] [drm:drm_atomic_state_init] Allocated atomic state 00000000d2cced77 [ 20.970531] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] 00000000bcdcfca1 state to 00000000d2cced77 [ 20.970536] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 000000002557cfc4 state to 00000000d2cced77 [ 20.970538] [drm:drm_atomic_set_fb_for_plane] Set [FB:87] for plane state 000000002557cfc4 [ 20.970541] [drm:drm_atomic_check_only] checking 00000000d2cced77 [ 20.970551] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 87 [ 20.970554] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 20.970562] [drm:drm_atomic_nonblocking_commit] committing 00000000d2cced77 nonblocking [ 20.987083] [drm:drm_atomic_state_default_clear] Clearing atomic state 00000000d2cced77 [ 20.987091] [drm:__drm_atomic_state_free] Freeing atomic state 00000000d2cced77 [ 20.987165] [drm:drm_mode_addfb2] [FB:88] [ 20.987178] [drm:drm_atomic_state_init] Allocated atomic state 0000000068080142 [ 20.987184] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] 00000000aa4828e0 state to 0000000068080142 [ 20.987188] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 000000000e8fbc1e state to 0000000068080142 [ 20.987192] [drm:drm_atomic_set_fb_for_plane] Set [FB:88] for plane state 000000000e8fbc1e [ 20.987195] [drm:drm_atomic_check_only] checking 0000000068080142 [ 20.987205] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 88 [ 20.987208] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 20.987216] [drm:drm_atomic_nonblocking_commit] committing 0000000068080142 nonblocking [ 21.003759] [drm:drm_atomic_state_default_clear] Clearing atomic state 0000000068080142 [ 21.003767] [drm:__drm_atomic_state_free] Freeing atomic state 0000000068080142 [ 21.003838] [drm:drm_mode_addfb2] [FB:87] [ 21.003851] [drm:drm_atomic_state_init] Allocated atomic state 000000000f94b764 [ 21.003856] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] 000000001c6c0214 state to 000000000f94b764 [ 21.003861] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 00000000b190e252 state to 000000000f94b764 [ 21.003864] [drm:drm_atomic_set_fb_for_plane] Set [FB:87] for plane state 00000000b190e252 [ 21.003867] [drm:drm_atomic_check_only] checking 000000000f94b764 [ 21.003877] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 87 [ 21.003881] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 21.003889] [drm:drm_atomic_nonblocking_commit] committing 000000000f94b764 nonblocking [ 21.020424] [drm:drm_atomic_state_default_clear] Clearing atomic state 000000000f94b764 [ 21.020433] [drm:__drm_atomic_state_free] Freeing atomic state 000000000f94b764 [ 21.020504] [drm:drm_mode_addfb2] [FB:88] [ 21.020517] [drm:drm_atomic_state_init] Allocated atomic state 000000009102f499 [ 21.020522] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] 00000000e0b54598 state to 000000009102f499 [ 21.020526] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 000000000e8fbc1e state to 000000009102f499 [ 21.020530] [drm:drm_atomic_set_fb_for_plane] Set [FB:88] for plane state 000000000e8fbc1e [ 21.020533] [drm:drm_atomic_check_only] checking 000000009102f499 [ 21.020543] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 88 [ 21.020546] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 21.020554] [drm:drm_atomic_nonblocking_commit] committing 000000009102f499 nonblocking [ 21.037090] [drm:drm_atomic_state_default_clear] Clearing atomic state 000000009102f499 [ 21.037099] [drm:__drm_atomic_state_free] Freeing atomic state 000000009102f499 [ 21.037171] [drm:drm_mode_addfb2] [FB:87] [ 21.037184] [drm:drm_atomic_state_init] Allocated atomic state 000000008ae23c70 [ 21.037189] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] 000000009499bc23 state to 000000008ae23c70 [ 21.037193] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 000000002557cfc4 state to 000000008ae23c70 [ 21.037196] [drm:drm_atomic_set_fb_for_plane] Set [FB:87] for plane state 000000002557cfc4 [ 21.037199] [drm:drm_atomic_check_only] checking 000000008ae23c70 [ 21.037208] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 87 [ 21.037211] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 21.037219] [drm:drm_atomic_nonblocking_commit] committing 000000008ae23c70 nonblocking [ 21.053748] [drm:drm_atomic_state_default_clear] Clearing atomic state 000000008ae23c70 [ 21.053756] [drm:__drm_atomic_state_free] Freeing atomic state 000000008ae23c70 [ 21.256770] [drm:drm_atomic_state_init] Allocated atomic state 000000008ae23c70 [ 21.256777] [drm:drm_atomic_get_plane_state] Added [PLANE:36:cursor A] 0000000056db0b6d state to 000000008ae23c70 [ 21.256783] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] 00000000e0b54598 state to 000000008ae23c70 [ 21.256786] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0000000056db0b6d to [NOCRTC] [ 21.256789] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000056db0b6d [ 21.256792] [drm:drm_atomic_check_only] checking 000000008ae23c70 [ 21.256801] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:36:cursor A] with fb -1 [ 21.256805] [drm:intel_plane_atomic_calc_changes] [PLANE:36:cursor A] visible 1 -> 0, off 1, on 0, ms 0 [ 21.256812] [drm:drm_atomic_commit] committing 000000008ae23c70 [ 21.270403] [drm:drm_atomic_state_default_clear] Clearing atomic state 000000008ae23c70 [ 21.270411] [drm:__drm_atomic_state_free] Freeing atomic state 000000008ae23c70 [ 21.270836] [drm:drm_mode_addfb2] [FB:85] [ 21.270848] [drm:drm_atomic_state_init] Allocated atomic state 000000008ae23c70 [ 21.270854] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] 000000009499bc23 state to 000000008ae23c70 [ 21.270858] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 000000000e8fbc1e state to 000000008ae23c70 [ 21.270861] [drm:drm_atomic_set_fb_for_plane] Set [FB:85] for plane state 000000000e8fbc1e [ 21.270865] [drm:drm_atomic_check_only] checking 000000008ae23c70 [ 21.270876] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 85 [ 21.270879] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 21.270886] [drm:drm_atomic_nonblocking_commit] committing 000000008ae23c70 nonblocking [ 21.287124] [drm:drm_atomic_state_default_clear] Clearing atomic state 000000008ae23c70 [ 21.287133] [drm:__drm_atomic_state_free] Freeing atomic state 000000008ae23c70 [ 21.373389] [drm:drm_atomic_state_init] Allocated atomic state 000000009102f499 [ 21.373395] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 00000000b190e252 state to 000000009102f499 [ 21.373400] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] 000000001c6c0214 state to 000000009102f499 [ 21.373405] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] 000000002557cfc4 state to 000000009102f499 [ 21.373408] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000002557cfc4 [ 21.373416] [drm:drm_atomic_get_plane_state] Added [PLANE:36:cursor A] 000000004936eddb state to 000000009102f499 [ 21.373418] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000004936eddb [ 21.373422] [drm:drm_atomic_get_plane_state] Added [PLANE:40:primary B] 00000000ba4c7d2e state to 000000009102f499 [ 21.373425] [drm:drm_atomic_get_plane_state] Added [PLANE:43:sprite B] 0000000066f8622d state to 000000009102f499 [ 21.373427] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000066f8622d [ 21.373431] [drm:drm_atomic_get_plane_state] Added [PLANE:48:cursor B] 00000000c8d164c9 state to 000000009102f499 [ 21.373433] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000c8d164c9 [ 21.373436] [drm:drm_atomic_get_plane_state] Added [PLANE:52:primary C] 000000007229bb6a state to 000000009102f499 [ 21.373440] [drm:drm_atomic_get_plane_state] Added [PLANE:55:sprite C] 000000009b178326 state to 000000009102f499 [ 21.373442] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000009b178326 [ 21.373445] [drm:drm_atomic_get_plane_state] Added [PLANE:60:cursor C] 00000000932c8ebe state to 000000009102f499 [ 21.373448] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000932c8ebe [ 21.373454] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 000000001c6c0214 [ 21.373458] [drm:drm_atomic_set_fb_for_plane] Set [FB:84] for plane state 00000000b190e252 [ 21.373461] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:39:pipe A] to 000000009102f499 [ 21.373467] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:65:eDP-1] 000000002feecb48 state to 000000009102f499 [ 21.373471] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000002feecb48 to [NOCRTC] [ 21.373474] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000002feecb48 to [CRTC:39:pipe A] [ 21.373479] [drm:drm_atomic_get_crtc_state] Added [CRTC:51:pipe B] 000000000f94b764 state to 000000009102f499 [ 21.373481] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 000000000f94b764 [ 21.373484] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000ba4c7d2e [ 21.373487] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:51:pipe B] to 000000009102f499 [ 21.373492] [drm:drm_atomic_get_crtc_state] Added [CRTC:63:pipe C] 00000000aa4828e0 state to 000000009102f499 [ 21.373494] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 00000000aa4828e0 [ 21.373497] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000007229bb6a [ 21.373500] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:63:pipe C] to 000000009102f499 [ 21.373503] [drm:drm_atomic_check_only] checking 000000009102f499 [ 21.373511] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:65:eDP-1] [ 21.373515] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 21.373525] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 84 [ 21.373528] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 21.373536] [drm:drm_atomic_commit] committing 000000009102f499 [ 21.387076] [drm:drm_atomic_state_default_clear] Clearing atomic state 000000009102f499 [ 21.387090] [drm:__drm_atomic_state_free] Freeing atomic state 000000009102f499 [ 21.387100] [drm:drm_atomic_state_init] Allocated atomic state 000000009102f499 [ 21.387105] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 0000000034fb8535 state to 000000009102f499 [ 21.387109] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] 000000009499bc23 state to 000000009102f499 [ 21.387113] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] 000000008ae55f0b state to 000000009102f499 [ 21.387116] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000008ae55f0b [ 21.387119] [drm:drm_atomic_get_plane_state] Added [PLANE:36:cursor A] 0000000006be3bbf state to 000000009102f499 [ 21.387122] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000006be3bbf [ 21.387125] [drm:drm_atomic_get_plane_state] Added [PLANE:40:primary B] 000000000454b774 state to 000000009102f499 [ 21.387129] [drm:drm_atomic_get_plane_state] Added [PLANE:43:sprite B] 00000000062c7d85 state to 000000009102f499 [ 21.387131] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000062c7d85 [ 21.387134] [drm:drm_atomic_get_plane_state] Added [PLANE:48:cursor B] 0000000061d5b67d state to 000000009102f499 [ 21.387137] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000061d5b67d [ 21.387140] [drm:drm_atomic_get_plane_state] Added [PLANE:52:primary C] 000000003fd9a89a state to 000000009102f499 [ 21.387143] [drm:drm_atomic_get_plane_state] Added [PLANE:55:sprite C] 000000004527be71 state to 000000009102f499 [ 21.387146] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000004527be71 [ 21.387149] [drm:drm_atomic_get_plane_state] Added [PLANE:60:cursor C] 00000000838dfd70 state to 000000009102f499 [ 21.387151] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000838dfd70 [ 21.387157] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 000000009499bc23 [ 21.387160] [drm:drm_atomic_set_fb_for_plane] Set [FB:84] for plane state 0000000034fb8535 [ 21.387164] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:39:pipe A] to 000000009102f499 [ 21.387169] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:65:eDP-1] 00000000ac05b558 state to 000000009102f499 [ 21.387173] [drm:drm_atomic_set_crtc_for_connector] Link connector state 00000000ac05b558 to [NOCRTC] [ 21.387176] [drm:drm_atomic_set_crtc_for_connector] Link connector state 00000000ac05b558 to [CRTC:39:pipe A] [ 21.387180] [drm:drm_atomic_get_crtc_state] Added [CRTC:51:pipe B] 0000000068080142 state to 000000009102f499 [ 21.387183] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 0000000068080142 [ 21.387185] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000000454b774 [ 21.387188] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:51:pipe B] to 000000009102f499 [ 21.387193] [drm:drm_atomic_get_crtc_state] Added [CRTC:63:pipe C] 00000000bcdcfca1 state to 000000009102f499 [ 21.387195] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 00000000bcdcfca1 [ 21.387198] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000003fd9a89a [ 21.387201] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:63:pipe C] to 000000009102f499 [ 21.387204] [drm:drm_atomic_check_only] checking 000000009102f499 [ 21.387211] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:65:eDP-1] [ 21.387215] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 21.387224] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 84 [ 21.387227] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 21.387235] [drm:drm_atomic_commit] committing 000000009102f499 [ 21.403741] [drm:drm_atomic_state_default_clear] Clearing atomic state 000000009102f499 [ 21.403755] [drm:__drm_atomic_state_free] Freeing atomic state 000000009102f499 [ 21.403796] [drm:drm_atomic_state_init] Allocated atomic state 000000009102f499 [ 21.403803] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 00000000932c8ebe state to 000000009102f499 [ 21.403808] [drm:drm_atomic_get_crtc_state] Added [CRTC:39:pipe A] 00000000aa4828e0 state to 000000009102f499 [ 21.403812] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] 000000009b178326 state to 000000009102f499 [ 21.403816] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000009b178326 [ 21.403820] [drm:drm_atomic_get_plane_state] Added [PLANE:36:cursor A] 000000007229bb6a state to 000000009102f499 [ 21.403824] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000007229bb6a [ 21.403828] [drm:drm_atomic_get_plane_state] Added [PLANE:40:primary B] 00000000c8d164c9 state to 000000009102f499 [ 21.403832] [drm:drm_atomic_get_plane_state] Added [PLANE:43:sprite B] 0000000066f8622d state to 000000009102f499 [ 21.403835] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000066f8622d [ 21.403839] [drm:drm_atomic_get_plane_state] Added [PLANE:48:cursor B] 00000000ba4c7d2e state to 000000009102f499 [ 21.403842] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000ba4c7d2e [ 21.403846] [drm:drm_atomic_get_plane_state] Added [PLANE:52:primary C] 000000004936eddb state to 000000009102f499 [ 21.403850] [drm:drm_atomic_get_plane_state] Added [PLANE:55:sprite C] 0000000066905869 state to 000000009102f499 [ 21.403853] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0000000066905869 [ 21.403857] [drm:drm_atomic_get_plane_state] Added [PLANE:60:cursor C] 00000000c11402f2 state to 000000009102f499 [ 21.403860] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000c11402f2 [ 21.403867] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 00000000aa4828e0 [ 21.403871] [drm:drm_atomic_set_fb_for_plane] Set [FB:84] for plane state 00000000932c8ebe [ 21.403876] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:39:pipe A] to 000000009102f499 [ 21.403882] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:65:eDP-1] 000000002feecb48 state to 000000009102f499 [ 21.403887] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000002feecb48 to [NOCRTC] [ 21.403891] [drm:drm_atomic_set_crtc_for_connector] Link connector state 000000002feecb48 to [CRTC:39:pipe A] [ 21.403896] [drm:drm_atomic_get_crtc_state] Added [CRTC:51:pipe B] 000000000f94b764 state to 000000009102f499 [ 21.403900] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 000000000f94b764 [ 21.403903] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 00000000c8d164c9 [ 21.403907] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:51:pipe B] to 000000009102f499 [ 21.403912] [drm:drm_atomic_get_crtc_state] Added [CRTC:63:pipe C] 000000001c6c0214 state to 000000009102f499 [ 21.403915] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 000000001c6c0214 [ 21.403918] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 000000004936eddb [ 21.403922] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:63:pipe C] to 000000009102f499 [ 21.403926] [drm:drm_atomic_check_only] checking 000000009102f499 [ 21.403935] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:65:eDP-1] [ 21.403939] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 21.403950] [drm:intel_plane_atomic_calc_changes] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 84 [ 21.403954] [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 21.403963] [drm:drm_atomic_commit] committing 000000009102f499 [ 21.420428] [drm:drm_atomic_state_default_clear] Clearing atomic state 000000009102f499 [ 21.420442] [drm:__drm_atomic_state_free] Freeing atomic state 000000009102f499 [ 22.239108] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 22.239118] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007 [ 24.113936] wlan0: authenticate with c8:0e:14:15:00:bd [ 24.116780] wlan0: send auth to c8:0e:14:15:00:bd (try 1/3) [ 24.121406] wlan0: authenticated [ 24.123042] wlan0: associate with c8:0e:14:15:00:bd (try 1/3) [ 24.137927] wlan0: RX AssocResp from c8:0e:14:15:00:bd (capab=0x411 status=0 aid=4) [ 24.139534] wlan0: associated [ 24.148877] wlan0: Limiting TX power to 27 (30 - 3) dBm as advertised by c8:0e:14:15:00:bd [ 24.167909] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 24.825482] bpfilter: Loaded bpfilter_umh pid 15436