microcode: microcode updated early to revision 0x28, date = 2018-05-22 Linux version 4.19.0-rc5-1-default (leitner@acidblob) (gcc version 8.2.1 20180831 [gcc-8-branch revision 264010] (SUSE Linux)) #6 SMP PREEMPT Sun Sep 30 19:40:07 CEST 2018 Command line: BOOT_IMAGE=/boot/bzImage root=PARTUUID=4e87d3c0-f082-4948-8aca-0319ae0ac13d rootwait drm.debug=0xf KERNEL supported cpus: Intel GenuineIntel x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64 x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64 x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format. BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved BIOS-e820: [mem 0x0000000012151000-0x0000000074553fff] usable BIOS-e820: [mem 0x0000000074554000-0x0000000074a53fff] reserved BIOS-e820: [mem 0x0000000074a54000-0x0000000074d53fff] type 20 BIOS-e820: [mem 0x0000000074d54000-0x0000000077753fff] reserved BIOS-e820: [mem 0x0000000077754000-0x00000000777b3fff] ACPI NVS BIOS-e820: [mem 0x00000000777b4000-0x00000000777f3fff] ACPI data BIOS-e820: [mem 0x00000000777f4000-0x0000000078cabfff] usable BIOS-e820: [mem 0x0000000078cac000-0x00000000795abfff] reserved BIOS-e820: [mem 0x00000000795ac000-0x0000000079bfffff] usable BIOS-e820: [mem 0x0000000079c00000-0x000000007fffffff] reserved BIOS-e820: [mem 0x00000000d3709000-0x00000000d3709fff] reserved BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable NX (Execute Disable) protection: active efi: EFI v2.60 by INSYDE Corp. efi: ACPI=0x777f3000 ACPI 2.0=0x777f3014 ESRT=0x7481d018 SMBIOS=0x7480b000 SMBIOS 3.0=0x74809000 SMBIOS 3.0.1 present. DMI: Acer Swift SF114-32/Sapporo_GL, BIOS V1.03 05/02/2018 tsc: Detected 1094.400 MHz processor e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable last_pfn = 0x280000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 00FF800000 mask 7FFF800000 write-combining 1 base 0000000000 mask 7F80000000 write-back 2 base 007A000000 mask 7FFE000000 uncachable 3 base 007C000000 mask 7FFC000000 uncachable 4 base 0100000000 mask 7F00000000 write-back 5 base 0200000000 mask 7F80000000 write-back 6 base 0090000000 mask 7FF0000000 write-combining 7 disabled 8 disabled 9 disabled x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT last_pfn = 0x79c00 max_arch_pfn = 0x400000000 esrt: Reserving ESRT space from 0x000000007481d018 to 0x000000007481d050. Base memory trampoline at [(____ptrval____)] 98000 size 24576 Using GB pages for direct mapping BRK [0x13fe01000, 0x13fe01fff] PGTABLE BRK [0x13fe02000, 0x13fe02fff] PGTABLE BRK [0x13fe03000, 0x13fe03fff] PGTABLE BRK [0x13fe04000, 0x13fe04fff] PGTABLE BRK [0x13fe05000, 0x13fe05fff] PGTABLE BRK [0x13fe06000, 0x13fe06fff] PGTABLE BRK [0x13fe07000, 0x13fe07fff] PGTABLE BRK [0x13fe08000, 0x13fe08fff] PGTABLE BRK [0x13fe09000, 0x13fe09fff] PGTABLE BRK [0x13fe0a000, 0x13fe0afff] PGTABLE Secure boot could not be determined RAMDISK: [mem 0x37af8000-0x37d73fff] ACPI: Early table checksum verification disabled ACPI: RSDP 0x00000000777F3014 000024 (v02 ACRSYS) ACPI: XSDT 0x00000000777D0188 00010C (v01 ACRSYS ACRPRDCT 00000003 01000013) ACPI: FACP 0x00000000777E6000 000114 (v06 ACRSYS ACRPRDCT 00000003 1025 00040000) ACPI: DSDT 0x00000000777D4000 009EAC (v02 ACRSYS ACRPRDCT 00000003 1025 00040000) ACPI: FACS 0x00000000777AB000 000040 ACPI: FACS 0x00000000777AB000 000040 ACPI: SSDT 0x00000000777EF000 002615 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000) ACPI: SSDT 0x00000000777ED000 000554 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) ACPI: MSDM 0x00000000777EB000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) ACPI: DBG2 0x00000000777E9000 000072 (v00 ACRSYS ACRPRDCT 00000003 1025 00040000) ACPI: LPIT 0x00000000777E4000 00005C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000) ACPI: MCFG 0x00000000777E2000 00003C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000) ACPI: PRAM 0x00000000777E0000 000030 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000) ACPI: SSDT 0x00000000777D1000 002483 (v02 ACRSYS ACRPRDCT 00000003 1025 00040000) ACPI: SSDT 0x00000000777C9000 00045A (v02 ACRSYS ACRPRDCT 00003000 1025 00040000) ACPI: SSDT 0x00000000777C7000 00032D (v02 ACRSYS ACRPRDCT 00003000 1025 00040000) ACPI: SSDT 0x00000000777C3000 0027EC (v02 ACRSYS ACRPRDCT 00003000 1025 00040000) ACPI: BGRT 0x00000000777C2000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) ACPI: WDAT 0x00000000777C1000 000104 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) ACPI: UEFI 0x00000000777F2000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) ACPI: TPM2 0x00000000777EC000 000034 (v04 ACRSYS ACRPRDCT 00000002 1025 00040000) ACPI: DBGP 0x00000000777E8000 000034 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000) ACPI: APIC 0x00000000777E3000 000084 (v03 ACRSYS ACRPRDCT 00000003 1025 00040000) ACPI: WSMT 0x00000000777DE000 000028 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000) ACPI: SSDT 0x00000000777C8000 00072B (v02 ACRSYS ACRPRDCT 00003000 1025 00040000) ACPI: FPDT 0x00000000777DF000 000034 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000) ACPI: BDAT 0x00000000777EA000 000030 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000) ACPI: NPKT 0x00000000777E1000 000065 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000) ACPI: SSDT 0x00000000777C6000 00017C (v02 ACRSYS ACRPRDCT 00003000 1025 00040000) ACPI: UEFI 0x00000000777EE000 000042 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000) ACPI: SSDT 0x00000000777CA000 0053FB (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) ACPI: HPET 0x00000000777E5000 000038 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000) ACPI: DMAR 0x00000000777E7000 0000A8 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000) ACPI: NHLT 0x00000000777C0000 00002D (v00 ACRSYS ACRPRDCT 00000002 1025 00040000) ACPI: Local APIC address 0xfee00000 Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000027fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x0000000000057fff] node 0: [mem 0x0000000000059000-0x000000000009dfff] node 0: [mem 0x0000000000100000-0x000000000fffffff] node 0: [mem 0x0000000012151000-0x0000000074553fff] node 0: [mem 0x00000000777f4000-0x0000000078cabfff] node 0: [mem 0x00000000795ac000-0x0000000079bfffff] node 0: [mem 0x0000000100000000-0x000000027fffffff] Reserved but unavailable: 49493 pages Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] On node 0 totalpages: 2047659 DMA zone: 64 pages used for memmap DMA zone: 22 pages reserved DMA zone: 3996 pages, LIFO batch:0 DMA32 zone: 7357 pages used for memmap DMA32 zone: 470799 pages, LIFO batch:63 Normal zone: 24576 pages used for memmap Normal zone: 1572864 pages, LIFO batch:63 Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff] ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 smpboot: Allowing 4 CPUs, 0 hotplug CPUs [mem 0x80000000-0xd3708fff] available for PCI devices clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns random: get_random_bytes called from start_kernel+0x82/0x491 with crng_init=0 setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 percpu: Embedded 44 pages/cpu @(____ptrval____) s141144 r8192 d30888 u524288 pcpu-alloc: s141144 r8192 d30888 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists, mobility grouping on. Total pages: 2015640 Kernel command line: BOOT_IMAGE=/boot/bzImage root=PARTUUID=4e87d3c0-f082-4948-8aca-0319ae0ac13d rootwait drm.debug=0xf Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Memory: 1899684K/8190636K available (12312K kernel code, 1567K rwdata, 6824K rodata, 1516K init, 1844K bss, 305868K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Kernel/User page tables isolation: enabled ftrace: allocating 43052 entries in 169 pages rcu: Preemptible hierarchical RCU implementation. rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. Tasks RCU enabled. rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 16 Console: colour dummy device 80x25 console [tty0] enabled ACPI: Core revision 20180810 clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns hpet clockevent registered APIC: Switch to symmetric I/O mode setup DMAR: Host address width 39 DMAR: DRHD base: 0x000000fed64000 flags: 0x0 DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 9e2ff0505e DMAR: DRHD base: 0x000000fed65000 flags: 0x1 DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da DMAR: RMRR base: 0x00000077726000 end: 0x00000077745fff DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff DMAR-IR: IOAPIC id 1 under DRHD base 0xfed65000 IOMMU 1 DMAR-IR: HPET id 0 under DRHD base 0xfed65000 DMAR-IR: Enabled IRQ remapping in xapic mode ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns Calibrating delay loop (skipped), value calculated using timer frequency.. 2188.80 BogoMIPS (lpj=4377600) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature mce: CPU supports 7 MCE banks CPU0: Thermal monitoring enabled (TM1) process: using mwait in idle threads Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 Spectre V2 : Mitigation: Enhanced IBRS Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp Freeing SMP alternatives memory: 24K TSC deadline timer enabled smpboot: CPU0: Intel(R) Pentium(R) Silver N5000 CPU @ 1.10GHz (family: 0x6, model: 0x7a, stepping: 0x1) Performance Events: PEBS fmt3+, Goldmont plus events, 32-deep LBR, full-width counters, Intel PMU driver. ... version: 4 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f rcu: Hierarchical SRCU implementation. NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. smp: Bringing up secondary CPUs ... x86: Booting SMP configuration: .... node #0, CPUs: #1 x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature #2 x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature #3 x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature smp: Brought up 1 node, 4 CPUs smpboot: Max logical packages: 1 smpboot: Total of 4 processors activated (8755.20 BogoMIPS) node 0 initialised, 1496271 pages in 120ms devtmpfs: initialized PM: Registering ACPI NVS region [mem 0x77754000-0x777b3fff] (393216 bytes) clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 1024 (order: 4, 65536 bytes) xor: measuring software checksum speed prefetch64-sse: 5947.000 MB/sec generic_sse: 5062.000 MB/sec xor: using function: prefetch64-sse (5947.000 MB/sec) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 audit: initializing netlink subsys (disabled) audit: type=2000 audit(1538475211.448:1): state=initialized audit_enabled=0 res=1 cpuidle: using governor ladder cpuidle: using governor menu ACPI: bus type PCI registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 PCI: Using configuration type 1 for base access HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages cryptd: max_cpu_qlen set to 1000 raid6: sse2x1 gen() 2644 MB/s raid6: sse2x1 xor() 1700 MB/s raid6: sse2x2 gen() 3112 MB/s raid6: sse2x2 xor() 2000 MB/s raid6: sse2x4 gen() 3560 MB/s raid6: sse2x4 xor() 1856 MB/s raid6: using algorithm sse2x4 gen() 3560 MB/s raid6: .... xor() 1856 MB/s, rmw enabled raid6: using ssse3x2 recovery algorithm ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Added _OSI(Linux-Dell-Video) ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) ACPI: 10 ACPI AML tables successfully acquired and loaded ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF9EB2F7B73000 000102 (v02 PmRef Cpu0Cst 00003001 INTL 20130117) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF9EB2F7B72400 00015F (v02 PmRef ApIst 00003000 INTL 20130117) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF9EB2F7A63480 00008D (v02 PmRef ApCst 00003000 INTL 20130117) ACPI: EC: EC started ACPI: EC: interrupt blocked ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62 ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: Enabled 10 GPEs in block 00 to 7F ACPI: Power Resource [DRST] (on) ACPI: Power Resource [DRST] (on) ACPI: Power Resource [DRST] (on) ACPI: Power Resource [DRST] (on) ACPI: Power Resource [DRST] (on) ACPI: Power Resource [DRST] (on) ACPI: Power Resource [WRST] (on) ACPI: Power Resource [FN00] (on) ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0070-0x0077] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window] pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window] pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window] pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window] pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window] pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000 pci 0000:00:00.1: [8086:318c] type 00 class 0x118000 pci 0000:00:00.1: reg 0x10: [mem 0x80000000-0x80007fff 64bit] pci 0000:00:02.0: [8086:3184] type 00 class 0x030000 pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f] pci 0000:00:0c.0: [8086:31dc] type 00 class 0x028000 pci 0000:00:0c.0: reg 0x10: [mem 0xa1110000-0xa1113fff 64bit] pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold pci 0000:00:0e.0: [8086:3198] type 00 class 0x040380 pci 0000:00:0e.0: reg 0x10: [mem 0xa1114000-0xa1117fff 64bit] pci 0000:00:0e.0: reg 0x20: [mem 0xa1000000-0xa10fffff 64bit] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold pci 0000:00:0f.0: [8086:319a] type 00 class 0x078000 pci 0000:00:0f.0: reg 0x10: [mem 0xa111a000-0xa111afff 64bit] pci 0000:00:0f.0: PME# supported from D3hot pci 0000:00:12.0: [8086:31e3] type 00 class 0x010601 pci 0000:00:12.0: reg 0x10: [mem 0xa1118000-0xa1119fff] pci 0000:00:12.0: reg 0x14: [mem 0xa1121000-0xa11210ff] pci 0000:00:12.0: reg 0x18: [io 0x1080-0x1087] pci 0000:00:12.0: reg 0x1c: [io 0x1088-0x108b] pci 0000:00:12.0: reg 0x20: [io 0x1060-0x107f] pci 0000:00:12.0: reg 0x24: [mem 0xa111f000-0xa111f7ff] pci 0000:00:12.0: PME# supported from D3hot pci 0000:00:13.0: [8086:31d8] type 01 class 0x060400 pci 0000:00:13.0: PME# supported from D0 D3hot D3cold pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330 pci 0000:00:15.0: reg 0x10: [mem 0xa1100000-0xa110ffff 64bit] pci 0000:00:15.0: PME# supported from D3hot D3cold pci 0000:00:17.0: [8086:31b4] type 00 class 0x118000 pci 0000:00:17.0: reg 0x10: [mem 0xa111b000-0xa111bfff 64bit] pci 0000:00:17.0: reg 0x18: [mem 0xa111c000-0xa111cfff 64bit] pci 0000:00:1c.0: [8086:31cc] type 00 class 0x080501 pci 0000:00:1c.0: reg 0x10: [mem 0xa111d000-0xa111dfff 64bit] pci 0000:00:1c.0: reg 0x18: [mem 0xa111e000-0xa111efff 64bit] pci 0000:00:1f.0: [8086:31e8] type 00 class 0x060100 pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500 pci 0000:00:1f.1: reg 0x10: [mem 0xa1120000-0xa11200ff 64bit] pci 0000:00:1f.1: reg 0x20: [io 0x1040-0x105f] pci 0000:00:13.0: PCI bridge to [bus 01] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *7 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *9 ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) ACPI: EC: interrupt unblocked ACPI: EC: event unblocked ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62 ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events SCSI subsystem initialized libata version 3.00 loaded. ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Registered efivars operations Advanced Linux Sound Architecture Driver Initialized. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] e820: reserve RAM buffer [mem 0x74554000-0x77ffffff] e820: reserve RAM buffer [mem 0x78cac000-0x7bffffff] e820: reserve RAM buffer [mem 0x79c00000-0x7bffffff] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 19.200000 MHz counter clocksource: Switched to clocksource tsc-early pnp: PnP ACPI init system 00:00: [io 0x0680-0x069f] has been reserved system 00:00: [io 0x0400-0x047f] has been reserved system 00:00: [io 0x0500-0x05fe] has been reserved system 00:00: [mem 0xfe800000-0xfe80ffff] has been reserved system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) system 00:02: [mem 0xe0000000-0xefffffff] could not be reserved system 00:02: [mem 0xfea00000-0xfeafffff] has been reserved system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved system 00:02: [mem 0xfed03000-0xfed03fff] has been reserved system 00:02: [mem 0xfed06000-0xfed06fff] has been reserved system 00:02: [mem 0xfed08000-0xfed09fff] has been reserved system 00:02: [mem 0xfed80000-0xfedbffff] has been reserved system 00:02: [mem 0xfed1c000-0xfed1cfff] has been reserved system 00:02: [mem 0xfee00000-0xfeefffff] has been reserved system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) pnp: PnP ACPI: found 4 devices clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns pci 0000:00:13.0: PCI bridge to [bus 01] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window] pci_bus 0000:00: resource 12 [mem 0x80000000-0xbfffffff window] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xefffffff window] pci_bus 0000:00: resource 14 [mem 0xfea00000-0xfeafffff window] pci_bus 0000:00: resource 15 [mem 0xfed00000-0xfed003ff window] pci_bus 0000:00: resource 16 [mem 0xfed01000-0xfed01fff window] pci_bus 0000:00: resource 17 [mem 0xfed03000-0xfed03fff window] pci_bus 0000:00: resource 18 [mem 0xfed06000-0xfed06fff window] pci_bus 0000:00: resource 19 [mem 0xfed08000-0xfed09fff window] pci_bus 0000:00: resource 20 [mem 0xfed80000-0xfedbffff window] pci_bus 0000:00: resource 21 [mem 0xfed1c000-0xfed1cfff window] pci_bus 0000:00: resource 22 [mem 0xfee00000-0xfeefffff window] NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) TCP established hash table entries: 65536 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 65536 bind 65536) UDP hash table entries: 4096 (order: 5, 131072 bytes) UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 2544K DMAR: No ATSR found DMAR: dmar0: Using Queued invalidation DMAR: dmar1: Using Queued invalidation DMAR: Setting RMRR: DMAR: Setting identity map for device 0000:00:02.0 [0x7b800000 - 0x7fffffff] DMAR: Setting identity map for device 0000:00:15.0 [0x77726000 - 0x77745fff] DMAR: Prepare 0-16MiB unity mapping for LPC DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] DMAR: Intel(R) Virtualization Technology for Directed I/O iommu: Adding device 0000:00:00.0 to group 0 iommu: Adding device 0000:00:00.1 to group 0 iommu: Adding device 0000:00:02.0 to group 1 iommu: Adding device 0000:00:0c.0 to group 2 iommu: Adding device 0000:00:0e.0 to group 3 iommu: Adding device 0000:00:0f.0 to group 4 iommu: Adding device 0000:00:12.0 to group 5 iommu: Adding device 0000:00:13.0 to group 6 iommu: Adding device 0000:00:15.0 to group 7 iommu: Adding device 0000:00:17.0 to group 8 iommu: Adding device 0000:00:1c.0 to group 9 iommu: Adding device 0000:00:1f.0 to group 10 iommu: Adding device 0000:00:1f.1 to group 10 RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer RAPL PMU: hw unit of domain pp0-core 2^-14 Joules RAPL PMU: hw unit of domain package 2^-14 Joules RAPL PMU: hw unit of domain dram 2^-14 Joules RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns clocksource: Switched to clocksource tsc Initialise system trusted keyrings Key type blacklist registered workingset: timestamp_bits=46 max_order=21 bucket_order=0 squashfs: version 4.0 (2009/01/31) Phillip Lougher fuse init (API version 7.27) pstore: using deflate compression Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:13.0: Signaling PME with IRQ 122 efifb: probing for efifb efifb: framebuffer at 0x90000000, using 8128k, total 8128k efifb: mode is 1920x1080x32, linelength=7680, pages=1 efifb: scrolling: redraw efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 240x67 fb0: EFI VGA frame buffer device intel_idle: MWAIT substates: 0x11242020 intel_idle: v0.4.1 model 0x7A intel_idle: lapic_timer_reliable_states 0xffffffff ACPI: AC Adapter [ADP1] (off-line) input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID0] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ01] (39 C) Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled battery: ACPI: Battery Slot [BAT0] (battery present) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 [drm:drm_core_init] Initialized [drm:i915_driver_load] No PCH found. [drm:i915_driver_load] WOPCM size: 1024KiB [drm] GuC: No firmware known for this platform! [drm] HuC: No firmware known for this platform! [drm:intel_uc_init_early] enable_guc=0 (submission:no huc:no) [drm:i915_driver_load] guc_log_level=0 (enabled:no, verbose:no, verbosity:0) [drm:intel_power_domains_init] Allowed DC state mask 09 [drm:__intel_uncore_early_sanitize] unclaimed mmio detected on uncore init, clearing [drm:i915_driver_load] ppgtt mode: 3 [drm:i915_ggtt_probe_hw] GGTT size = 4096M [drm:i915_ggtt_probe_hw] GMADR size = 256M [drm:i915_ggtt_probe_hw] DSM size = 64M [drm] VT-d active for gfx access checking generic (90000000 7f0000) vs hw (90000000 10000000) fb: switching to inteldrmfb from EFI VGA Console: switching to colour dummy device 80x25 [drm:i915_gem_init_stolen] GEN6_STOLEN_RESERVED = 7ff00047 [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 64512K [drm:intel_gvt_init] GVT-g is disabled by kernel params [drm:intel_opregion_setup] graphic opregion physical addr: 0x777a6018 [drm:intel_opregion_setup] Public ACPI methods supported [drm:intel_opregion_setup] ASLE supported [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (RVDA) [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm:intel_bios_init] Set default to SSC at 100000 kHz [drm:intel_bios_init] VBT signature "$VBT GEMINILAKE ", BDB version 212 [drm:intel_bios_init] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [drm:intel_bios_init] crt_ddc_bus_pin: 2 [drm:intel_opregion_get_panel_type] Failed to get panel details from OpRegion (-19) [drm:intel_bios_init] Panel type: 2 (VBT) [drm:intel_bios_init] DRRS supported mode is seamless [drm:intel_bios_init] Found panel mode in BIOS VBT tables: [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [drm:intel_bios_init] VBT initial LVDS value 300 [drm:intel_bios_init] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 180, controller 0 [drm:intel_bios_init] DRRS State Enabled:1 [drm:intel_bios_init] Skipping SDVO device mapping [drm:intel_bios_init] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [drm:intel_bios_init] VBT HDMI level shift for port A: 0 [drm:intel_bios_init] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [drm:intel_bios_init] VBT HDMI level shift for port C: 8 [drm:intel_dsm_detect] no _DSM method for intel device [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [drm:intel_power_well_enable] enabling power well 1 [drm:intel_dump_cdclk_state] Current CDCLK 316800 kHz, VCO 633600 kHz, ref 19200 kHz, bypass 19200 kHz, voltage level 13 [drm:intel_power_well_enable] enabling always-on [drm:intel_power_well_enable] enabling DC off [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [drm:intel_power_well_enable] enabling power well 2 [drm:intel_power_well_enable] enabling dpio-common-a [drm:bxt_ddi_phy_init] DDI PHY 1 already enabled, won't reprogram it [drm:intel_power_well_enable] enabling dpio-common-b [drm:intel_power_well_enable] enabling dpio-common-c [drm:intel_power_well_enable] enabling AUX A [drm:intel_power_well_enable] enabling AUX B [drm:intel_power_well_enable] enabling AUX C [drm:intel_csr_ucode_init] Loading i915/glk_dmc_ver1_04.bin [drm:drm_irq_install] irq=123 [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4) [drm:__bxt_hpd_detection_setup] Invert bit setting: hp_ctl:18001810 hp_port:38 [drm:intel_fbc_init] Sanitized enable_fbc value: 1 [drm:intel_print_wm_latency] Gen9 Plane WM0 latency 7 (7.0 usec) [drm:intel_print_wm_latency] Gen9 Plane WM1 latency 7 (7.0 usec) [drm:intel_print_wm_latency] Gen9 Plane WM2 latency 8 (8.0 usec) [drm:intel_print_wm_latency] Gen9 Plane WM3 latency 22 (22.0 usec) [drm:intel_print_wm_latency] Gen9 Plane WM4 latency 22 (22.0 usec) [drm:intel_print_wm_latency] Gen9 Plane WM5 latency 22 (22.0 usec) [drm:intel_print_wm_latency] Gen9 Plane WM6 latency 22 (22.0 usec) [drm:intel_print_wm_latency] Gen9 Plane WM7 latency 22 (22.0 usec) [drm:intel_modeset_init] 3 display pipes available. [drm:intel_dump_cdclk_state] Current CDCLK 316800 kHz, VCO 633600 kHz, ref 19200 kHz, bypass 19200 kHz, voltage level 13 [drm:intel_update_max_cdclk] Max CD clock rate: 316800 kHz [drm:intel_modeset_init] Max dotclock rate: 627264 kHz [drm:intel_ddi_init] Forcing DDI_A_4_LANES for port A [drm:intel_dp_init_connector] Adding eDP connector on port A [drm:intel_dp_init_connector] using AUX A for port A (VBT) [drm:intel_pps_dump_state] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000 [drm:intel_pps_dump_state] vbt t1_t3 1500 t8 500 t9 2000 t10 500 t11_t12 6000 [drm:intel_dp_init_panel_power_sequencer] panel power up delay 150, power down delay 50, power cycle delay 600 [drm:intel_dp_init_panel_power_sequencer] backlight on delay 50, off delay 200 [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x5dc0001, PP_OFF 0x1f40001, PP_DIV 0x60 [drm:edp_panel_vdd_on] Turning eDP port A VDD on [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f [drm:intel_dp_read_dpcd] DPCD: 11 0a 82 41 00 00 01 40 02 00 00 00 00 03 00 [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [drm:intel_dp_init_connector] eDP DPCD: 01 00 00 [drm:drm_add_edid_modes.part.29] ELD: no CEA Extension found [drm:drm_add_display_info] non_desktop set to 0 [drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 8 bpc. [drm:drm_add_display_info] non_desktop set to 0 [drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 8 bpc. [drm:intel_dp_init_connector] Downclock mode is not found. DRRS not supported [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 67764/96000 [drm:intel_setup_outputs] VBT says port B is not DVI/HDMI/DP compatible, respect it [drm:intel_hdmi_init_connector] Adding HDMI connector on port C [drm:intel_hdmi_init_connector] Using DDC pin 0x2 for port C (VBT) [drm:vlv_dsi_init] [drm:intel_modeset_setup_hw_state] pipe A active planes 0x1 [drm:intel_modeset_setup_hw_state] pipe A active planes 0x1 [drm:intel_modeset_setup_hw_state] pipe A active planes 0x1 [drm:intel_modeset_setup_hw_state] pipe A active planes 0x1 [drm:intel_modeset_setup_hw_state] pipe A active planes 0x1 [drm:intel_modeset_setup_hw_state] [CRTC:51:pipe A] hw state readout: enabled [drm:intel_modeset_setup_hw_state] pipe B active planes 0x0 [drm:intel_modeset_setup_hw_state] pipe B active planes 0x0 [drm:intel_modeset_setup_hw_state] pipe B active planes 0x0 [drm:intel_modeset_setup_hw_state] pipe B active planes 0x0 [drm:intel_modeset_setup_hw_state] pipe B active planes 0x0 [drm:intel_modeset_setup_hw_state] [CRTC:75:pipe B] hw state readout: disabled [drm:intel_modeset_setup_hw_state] pipe C active planes 0x0 [drm:intel_modeset_setup_hw_state] pipe C active planes 0x0 [drm:intel_modeset_setup_hw_state] pipe C active planes 0x0 [drm:intel_modeset_setup_hw_state] pipe C active planes 0x0 [drm:intel_modeset_setup_hw_state] pipe C active planes 0x0 [drm:intel_modeset_setup_hw_state] [CRTC:99:pipe C] hw state readout: disabled [drm:intel_modeset_setup_hw_state] PORT PLL A hw state readout: crtc_mask 0x00000001, on 1 [drm:intel_modeset_setup_hw_state] PORT PLL B hw state readout: crtc_mask 0x00000000, on 0 [drm:intel_modeset_setup_hw_state] PORT PLL C hw state readout: crtc_mask 0x00000000, on 0 [drm:intel_ddi_get_config] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp [drm:intel_modeset_setup_hw_state] [ENCODER:100:DDI A] hw state readout: enabled, pipe A [drm:intel_modeset_setup_hw_state] [ENCODER:107:DDI C] hw state readout: disabled, pipe A [drm:intel_modeset_setup_hw_state] [CONNECTOR:101:eDP-1] hw state readout: enabled [drm:intel_modeset_setup_hw_state] [CONNECTOR:108:HDMI-A-1] hw state readout: disabled [drm:drm_calc_timestamping_constants] crtc 51: hwmode: htotal 2250, vtotal 1132, vdisplay 1080 [drm:intel_modeset_setup_hw_state] crtc 51: clock 152839 kHz framedur 16664594 linedur 14721 [drm:intel_power_well_enable] enabling DDI A IO power well [drm:intel_dump_pipe_config] [CRTC:51:pipe A][setup_hw_state] [drm:intel_dump_pipe_config] output_types: EDP (0x100) [drm:intel_dump_pipe_config] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 [drm:intel_dump_m_n_config.isra.67] dp m_n: lanes: 2; gmch_m: 7122860, gmch_n: 8388608, link_m: 296785, link_n: 524288, tu: 64 [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [drm:intel_dump_pipe_config] requested mode: [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 152839 1920 2000 2060 2250 1080 1086 1094 1132 0x40 0xa [drm:intel_dump_pipe_config] adjusted mode: [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 152839 1920 2000 2060 2250 1080 1086 1094 1132 0x40 0xa [drm:intel_dump_pipe_config] crtc timings: 152839 1920 2000 2060 2250 1080 1086 1094 1132, type: 0x40 flags: 0xa [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 1920x1080, pixel rate 152839 [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [drm:intel_dump_pipe_config] ips: 0, double wide: 0 [drm:bxt_dump_hw_state] dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d [drm:intel_dump_pipe_config] planes on this crtc [drm:intel_dump_pipe_config] [PLANE:28:plane 1A] disabled, scaler_id = -1 [drm:intel_dump_pipe_config] [PLANE:33:plane 2A] disabled, scaler_id = -1 [drm:intel_dump_pipe_config] [PLANE:38:plane 3A] disabled, scaler_id = -1 [drm:intel_dump_pipe_config] [PLANE:43:plane 4A] disabled, scaler_id = -1 [drm:intel_dump_pipe_config] [PLANE:48:cursor A] disabled, scaler_id = -1 [drm:intel_dump_pipe_config] [CRTC:75:pipe B][setup_hw_state] [drm:intel_dump_pipe_config] output_types: (0x0) [drm:intel_dump_pipe_config] cpu_transcoder: B, pipe bpp: 0, dithering: 0 [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [drm:intel_dump_pipe_config] requested mode: [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:intel_dump_pipe_config] adjusted mode: [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:intel_dump_pipe_config] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0 [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [drm:intel_dump_pipe_config] ips: 0, double wide: 0 [drm:bxt_dump_hw_state] dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0 [drm:intel_dump_pipe_config] planes on this crtc [drm:intel_dump_pipe_config] [PLANE:52:plane 1B] disabled, scaler_id = -1 [drm:intel_dump_pipe_config] [PLANE:57:plane 2B] disabled, scaler_id = -1 [drm:intel_dump_pipe_config] [PLANE:62:plane 3B] disabled, scaler_id = -1 [drm:intel_dump_pipe_config] [PLANE:67:plane 4B] disabled, scaler_id = -1 [drm:intel_dump_pipe_config] [PLANE:72:cursor B] disabled, scaler_id = -1 [drm:intel_dump_pipe_config] [CRTC:99:pipe C][setup_hw_state] [drm:intel_dump_pipe_config] output_types: (0x0) [drm:intel_dump_pipe_config] cpu_transcoder: C, pipe bpp: 0, dithering: 0 [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [drm:intel_dump_pipe_config] requested mode: [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:intel_dump_pipe_config] adjusted mode: [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:intel_dump_pipe_config] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0 [drm:intel_dump_pipe_config] num_scalers: 1, scaler_users: 0x0, scaler_id: -1 [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [drm:intel_dump_pipe_config] ips: 0, double wide: 0 [drm:bxt_dump_hw_state] dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0 [drm:intel_dump_pipe_config] planes on this crtc [drm:intel_dump_pipe_config] [PLANE:76:plane 1C] disabled, scaler_id = -1 [drm:intel_dump_pipe_config] [PLANE:81:plane 2C] disabled, scaler_id = -1 [drm:intel_dump_pipe_config] [PLANE:86:plane 3C] disabled, scaler_id = -1 [drm:intel_dump_pipe_config] [PLANE:91:plane 4C] disabled, scaler_id = -1 [drm:intel_dump_pipe_config] [PLANE:96:cursor C] disabled, scaler_id = -1 [drm:drm_mode_object_get] OBJ ID: 101 (2) [drm:intel_power_well_disable] disabling AUX C [drm:intel_power_well_disable] disabling AUX B [drm:intel_power_well_disable] disabling dpio-common-c [drm:intel_power_well_disable] disabling dpio-common-b [drm:intel_power_well_disable] disabling power well 2 [drm:skylake_get_initial_plane_config] pipe A/plane 1A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0x0000000000000000, gtt_offset=0x0000000000000000, size=0x00000000007e9000 [drm:intel_alloc_initial_plane_obj.isra.101] initial plane fb obj 00000000457c96eb [drm:intel_modeset_init] pipe A active planes 0x1 [drm:intel_wopcm_init] Calculated GuC WOPCM Region: [16KiB, 984KiB) [drm:i915_gem_init_ggtt] clearing unused GTT space: [7ea000, 100000000] [drm:intel_ctx_workarounds_init] Number of context specific w/a: 10 [drm:i915_gem_contexts_init] logical context support initialized [drm:intel_init_gt_powersave] BIOS enabled RC states: HW_CTRL off HW_RC6 off SW_TARGET_STATE 4 i915 0000:00:02.0: Failed to initialize GPU, declaring it wedged! i915 0000:00:02.0: Please file a bug at https://bugs.freedesktop.org/enter_bug.cgi?product=DRI against DRM/Intel providing the dmesg log by booting with drm.debug=0xf [drm:intel_fbdev_init] found possible fb from plane A [drm:intel_fbdev_init] pipe B not active or no fb, skipping [drm:intel_fbdev_init] pipe C not active or no fb, skipping [drm:intel_fbdev_init] checking plane A for BIOS fb [drm:intel_fbdev_init] pipe A area: 1920x1080, bpp: 32, size: 8294400 [drm:intel_fbdev_init] fb big enough for plane A (8294400 >= 8294400) [drm:intel_fbdev_init] pipe B not active, skipping [drm:intel_fbdev_init] pipe C not active, skipping [drm:drm_mode_object_get] OBJ ID: 114 (1) [drm:intel_fbdev_init] using BIOS fb for initial console [drm:drm_mode_object_get] OBJ ID: 101 (3) [drm:drm_mode_object_get] OBJ ID: 108 (2) [drm:__bxt_hpd_detection_setup] Invert bit setting: hp_ctl:18001810 hp_port:28 [drm:drm_minor_register] [drm:drm_minor_register] new minor registered 128 [drm:drm_minor_register] [drm:drm_minor_register] new minor registered 0 [drm:drm_sysfs_connector_add] adding "eDP-1" to sysfs [drm:drm_sysfs_hotplug_event] generating hotplug event [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered [drm:intel_dp_connector_register] registering DPDDC-A bus for card0-eDP-1 [drm:drm_dp_aux_register_devnode] drm_dp_aux_dev: aux [DPDDC-A] registered as minor 0 [drm:drm_sysfs_connector_add] adding "HDMI-A-1" to sysfs [drm:drm_sysfs_hotplug_event] generating hotplug event [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0 [drm:intel_opregion_register] 2 outputs detected ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 i915 device info: pciid=0x3184 rev=0x03 platform=GEMINILAKE gen=9 i915 device info: is_mobile: no i915 device info: is_lp: yes i915 device info: is_alpha_support: no i915 device info: has_64bit_reloc: yes i915 device info: has_aliasing_ppgtt: yes i915 device info: has_csr: yes i915 device info: has_ddi: yes i915 device info: has_dp_mst: yes i915 device info: has_reset_engine: yes i915 device info: has_fbc: yes [drm:drm_setup_crtcs] i915 device info: has_fpga_dbg: yes i915 device info: has_full_ppgtt: yes i915 device info: has_full_48bit_ppgtt: yes [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:eDP-1] i915 device info: has_gmch_display: no [drm:intel_dp_detect] [CONNECTOR:101:eDP-1] i915 device info: has_guc: yes i915 device info: has_guc_ct: no i915 device info: has_hotplug: yes [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 i915 device info: has_l3_dpf: no [drm:intel_dp_print_rates] sink rates: 162000, 270000 i915 device info: has_llc: no [drm:intel_dp_print_rates] common rates: 162000, 270000 i915 device info: has_logical_ring_contexts: yes i915 device info: has_logical_ring_elsq: no i915 device info: has_logical_ring_preemption: yes i915 device info: has_overlay: no i915 device info: has_pooled_eu: yes i915 device info: has_psr: yes i915 device info: has_rc6: yes i915 device info: has_rc6p: no i915 device info: has_resource_streamer: yes i915 device info: has_runtime_pm: yes i915 device info: has_snoop: yes i915 device info: unfenced_needs_alignment: no i915 device info: cursor_needs_physical: no i915 device info: hws_needs_physical: no i915 device info: overlay_needs_physical: no i915 device info: supports_tv: no i915 device info: has_ipc: yes i915 device info: slice total: 1, mask=0001 i915 device info: subslice total: 3 i915 device info: slice0: 3 subslices, mask=0007 i915 device info: EU total: 18 i915 device info: EU per subslice: 6 i915 device info: has slice power gating: no i915 device info: has subslice power gating: yes i915 device info: has EU power gating: yes i915 device info: CS timestamp frequency: 19200 kHz [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:eDP-1] status updated from unknown to connected [drm:drm_add_display_info] non_desktop set to 0 [drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 8 bpc. [drm:drm_mode_object_put] OBJ ID: 103 (1) [drm:drm_add_edid_modes.part.29] ELD: no CEA Extension found [drm:drm_add_display_info] non_desktop set to 0 [drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 8 bpc. [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:eDP-1] probed modes : [drm:drm_mode_debug_printmodeline] Modeline 102:"1920x1080" 60 152840 1920 2000 2060 2250 1080 1086 1094 1132 0x48 0xa [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:HDMI-A-1] [drm:intel_hdmi_detect] [CONNECTOR:108:HDMI-A-1] [drm:drm_sysfs_hotplug_event] generating hotplug event [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1 [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0 [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:HDMI-A-1] status updated from unknown to disconnected [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:HDMI-A-1] disconnected [drm:drm_setup_crtcs] connector 101 enabled? yes [drm:drm_setup_crtcs] connector 108 enabled? no [drm:intel_fb_initial_config] Not using firmware configuration [drm:drm_setup_crtcs] looking for cmdline mode on connector 101 [drm:drm_setup_crtcs] looking for preferred mode on connector 101 0 [drm:drm_setup_crtcs] found mode 1920x1080 [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 51 (0,0) [drm:drm_mode_object_get] OBJ ID: 101 (3) [drm:intelfb_create] re-using BIOS fb [drm:intelfb_create] allocated 1920x1080 fb: 0x00000000 [drm:drm_mode_object_get] OBJ ID: 114 (2) [drm:drm_mode_object_get] OBJ ID: 113 (1) [drm:drm_mode_object_put] OBJ ID: 113 (2) [drm:drm_mode_object_get] OBJ ID: 114 (3) [drm:drm_mode_object_put] OBJ ID: 114 (4) [drm:drm_mode_object_get] OBJ ID: 101 (5) [drm:drm_mode_object_get] OBJ ID: 101 (6) [drm:drm_mode_object_put] OBJ ID: 101 (6) [drm:drm_mode_object_get] OBJ ID: 101 (5) [drm:intel_atomic_check] [CONNECTOR:101:eDP-1] checking for sink bpp constrains [drm:intel_atomic_check] clamping display bpp (was 36) to EDID reported max of 24 [drm:intel_dp_compute_config] DP link computation with max lane count 2 max rate 270000 max bpp 24 pixel clock 152840KHz [drm:intel_dp_compute_config] DP lane count 2 clock 270000 bpp 24 [drm:intel_dp_compute_config] DP link rate required 458520 available 540000 [drm:intel_atomic_check] hw max bpp: 36, pipe bpp: 24, dithering: 0 [drm:intel_dump_pipe_config] [CRTC:51:pipe A][modeset] [drm:intel_dump_pipe_config] output_types: EDP (0x100) [drm:intel_dump_pipe_config] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 [drm:intel_dump_m_n_config.isra.67] dp m_n: lanes: 2; gmch_m: 7122860, gmch_n: 8388608, link_m: 296785, link_n: 524288, tu: 64 [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [drm:intel_dump_pipe_config] requested mode: [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 152840 1920 2000 2060 2250 1080 1086 1094 1132 0x48 0xa [drm:intel_dump_pipe_config] adjusted mode: [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 152840 1920 2000 2060 2250 1080 1086 1094 1132 0x48 0xa [drm:intel_dump_pipe_config] crtc timings: 152840 1920 2000 2060 2250 1080 1086 1094 1132, type: 0x48 flags: 0xa [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 1920x1080, pixel rate 152840 [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [drm:intel_dump_pipe_config] ips: 0, double wide: 0 [drm:bxt_dump_hw_state] dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d [drm:intel_dump_pipe_config] planes on this crtc [drm:intel_dump_pipe_config] [PLANE:28:plane 1A] FB:114, fb = 1920x1080 format = XR24 little-endian (0x34325258) [drm:intel_dump_pipe_config] scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080 [drm:intel_dump_pipe_config] [PLANE:33:plane 2A] disabled, scaler_id = -1 [drm:intel_dump_pipe_config] [PLANE:38:plane 3A] disabled, scaler_id = -1 [drm:intel_dump_pipe_config] [PLANE:43:plane 4A] disabled, scaler_id = -1 [drm:intel_dump_pipe_config] [PLANE:48:cursor A] disabled, scaler_id = -1 [drm:intel_atomic_check] New cdclk calculated to be logical 316800 kHz, actual 316800 kHz [drm:intel_atomic_check] New voltage level calculated to be logical 13, actual 13 [drm:bxt_get_dpll] [CRTC:51:pipe A] using pre-allocated PORT PLL A [drm:intel_reference_shared_dpll] using PORT PLL A for pipe A [drm:intel_edp_backlight_off] brd: module loaded loop: module loaded ahci 0000:00:12.0: version 3.0 ahci 0000:00:12.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst scsi host0: ahci ata1: SATA max UDMA/133 abar m2048@0xa111f000 port 0xa111f100 irq 124 Intel(R) Wireless WiFi driver for Linux Copyright(c) 2003- 2015 Intel Corporation usbcore: registered new interface driver r8152 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver iwlwifi 0000:00:0c.0: loaded firmware version 38.c0e03d94.0 op_mode iwlmvm iwlwifi 0000:00:0c.0: Detected Intel(R) Dual Band Wireless AC 9560, REV=0x318 xhci_hcd 0000:00:15.0: xHCI Host Controller xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1 xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: xHCI Host Controller usb usb1: Manufacturer: Linux 4.19.0-rc5-1-default xhci-hcd usb usb1: SerialNumber: 0000:00:15.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 9 ports detected xhci_hcd 0000:00:15.0: xHCI Host Controller xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2 xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: xHCI Host Controller usb usb2: Manufacturer: Linux 4.19.0-rc5-1-default xhci-hcd usb usb2: SerialNumber: 0000:00:15.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 7 ports detected usb: port power management may be unreliable usbcore: registered new interface driver usblp usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver ums-realtek i8042: PNP: PS/2 Controller [PNP0303:KBD0] at 0x60,0x64 irq 1 i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: registered as rtc0 rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs intel_pstate: Intel P-state driver initializing ledtrig-cpu: registered to indicate activity on CPUs EFI Variables Facility v0.08 2004-May-17 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 iwlwifi 0000:00:0c.0: base HW address: 14:4f:8a:10:f9:e6 hidraw: raw HID events driver (C) Jiri Kosina Initializing XFRM netlink socket NET: Registered protocol family 10 Segment Routing with IPv6 NET: Registered protocol family 17 NET: Registered protocol family 15 RAS: Correctable Errors collector initialized. microcode: sig=0x706a1, pf=0x1, revision=0x28 microcode: Microcode Update Driver: v2.2. SSE version of gcm_enc/dec engaged. sched_clock: Marking stable (2416325992, -2527896)->(2457785759, -43987663) registered taskstats version 1 Loading compiled-in X.509 certificates Loaded X.509 cert 'Build time autogenerated kernel key: 8eaa1d35ed8eaff55362645fb00af8c60759fbd0' Btrfs loaded, crc32c=crc32c-generic, assert=on rtc_cmos 00:03: setting system clock to 2018-10-02 10:13:33 UTC (1538475213) cfg80211: Loading compiled-in X.509 certificates for regulatory database ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' ALSA device list: No soundcards found. thermal thermal_zone5: failed to read out thermal zone (-61) platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 cfg80211: failed to load regulatory.db [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [drm:intel_disable_pipe] disabling pipe A [drm:intel_edp_panel_off] Turn eDP port A panel power off [drm:intel_edp_panel_off] Wait for panel power off time [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control 00000060 [drm:gen8_de_irq_handler] hotplug event received, stat 0x00000008, dig 0x19001810, pins 0x00000010, long 0x00000000 [drm:intel_hpd_irq_handler] digital hpd port A - short [drm:intel_dp_hpd_pulse] got hpd irq on port A - short [drm:wait_panel_status] Wait complete [drm:intel_power_well_disable] disabling DDI A IO power well [drm:intel_disable_shared_dpll] disable PORT PLL A (active 1, on? 1) for crtc 51 [drm:edp_panel_vdd_on] Turning eDP port A VDD on [drm:wait_panel_power_cycle] Wait for panel power cycle [drm:intel_disable_shared_dpll] disabling PORT PLL A [drm:drm_calc_timestamping_constants] crtc 51: hwmode: htotal 2250, vtotal 1132, vdisplay 1080 [drm:drm_atomic_helper_update_legacy_modeset_state] crtc 51: clock 152840 kHz framedur 16664485 linedur 14721 [drm:intel_atomic_commit_tail] [ENCODER:100:DDI A] [drm:intel_atomic_commit_tail] [ENCODER:107:DDI C] [drm:verify_single_dpll_state.isra.94] PORT PLL A [drm:verify_single_dpll_state.isra.94] PORT PLL B [drm:verify_single_dpll_state.isra.94] PORT PLL C [drm:intel_enable_shared_dpll] enable PORT PLL A (active 1, on? 0) for crtc 51 [drm:intel_enable_shared_dpll] enabling PORT PLL A [drm:gen8_de_irq_handler] hotplug event received, stat 0x00000008, dig 0x1a001810, pins 0x00000010, long 0x00000010 [drm:intel_hpd_irq_handler] digital hpd port A - long [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 4 - cnt: 0 usb 2-6: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd usb 2-6: New USB device found, idVendor=174c, idProduct=1153, bcdDevice= 0.01 usb 2-6: New USB device strings: Mfr=2, Product=3, SerialNumber=1 usb 2-6: Product: AS2115 usb 2-6: Manufacturer: ASMedia usb 2-6: SerialNumber: 00000000000000000000 scsi host1: uas scsi 1:0:0:0: Direct-Access ASMT 2115 0 PQ: 0 ANSI: 6 sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 1:0:0:0: [sda] Attached SCSI disk ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata1.00: ATA-9: HFS256G39TND-N210A, 30001P10, max UDMA/133 ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA ata1.00: configured for UDMA/133 usb 1-1: new full-speed USB device number 2 using xhci_hcd usb 1-1: New USB device found, idVendor=1c7a, idProduct=0570, bcdDevice=10.41 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product: EgisTec Touch Fingerprint Sensor usb 1-1: Manufacturer: EgisTec usb 1-1: SerialNumber: 070BFC82 usb 1-4: new full-speed USB device number 3 using xhci_hcd [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000060 [drm:wait_panel_status] Wait complete [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 [drm:edp_panel_vdd_on] eDP port A panel power wasn't enabled usb 1-4: New USB device found, idVendor=046d, idProduct=c080, bcdDevice=95.01 usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4: Product: Gaming Mouse G303 usb 1-4: Manufacturer: Logitech usb 1-4: SerialNumber: 157B34643937 [drm:gen8_de_irq_handler] hotplug event received, stat 0x00000008, dig 0x1a001810, pins 0x00000010, long 0x00000010 [drm:intel_hpd_irq_handler] digital hpd port A - long [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 4 - cnt: 1 [drm:edp_panel_on] Turn eDP port A panel power on [drm:wait_panel_power_cycle] Wait for panel power cycle [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000068 [drm:wait_panel_status] Wait complete [drm:edp_panel_on] Wait for panel power on [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control 0000006b usb 1-6: new high-speed USB device number 4 using xhci_hcd [drm:wait_panel_status] Wait complete [drm:intel_power_well_enable] enabling DDI A IO power well [drm:intel_dp_read_dpcd] DPCD: 11 0a 82 41 00 00 01 40 02 00 00 00 00 03 00 [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [drm:intel_dp_start_link_train] Using LINK_BW_SET value 0a [drm:intel_dp_set_signal_levels] Using vswing level 0 [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS1 [drm:intel_dp_start_link_train] clock recovery OK [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS2 [drm:intel_dp_start_link_train] Channel EQ done. DP Training successful [drm:intel_dp_start_link_train] [CONNECTOR:101:eDP-1] Link Training Passed at Link Rate = 270000, Lane count = 2 [drm:intel_enable_pipe] enabling pipe A [drm:intel_edp_backlight_on] [drm:intel_panel_enable_backlight] pipe A [drm:intel_panel_actually_set_backlight] set backlight PWM = 67764 usb 1-6: New USB device found, idVendor=0951, idProduct=1624, bcdDevice= 2.00 usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-6: Product: DataTraveler G2 usb 1-6: Manufacturer: Kingston usb 1-6: SerialNumber: 0019E000B46EA931965C010E usb-storage 1-6:1.0: USB Mass Storage device detected scsi host2: usb-storage 1-6:1.0 [drm:intel_enable_ddi] Panel doesn't support DRRS [drm:intel_fbc_enable] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1 [drm:intel_fbc_enable] Enabling FBC on pipe A [drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0 [drm:drm_handle_vblank] vblank event on 7, current 7 [drm:verify_connector_state.isra.93] [CONNECTOR:101:eDP-1] [drm:drm_mode_object_put] OBJ ID: 113 (1) [drm:intel_atomic_commit_tail] [CRTC:51:pipe A] [drm:verify_single_dpll_state.isra.94] PORT PLL A snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops) [drm:drm_mode_object_get] OBJ ID: 114 (3) [drm:intel_power_well_enable] enabling power well 2 [drm:drm_mode_object_get] OBJ ID: 116 (1) [drm:i915_hotplug_work_func] running encoder hotplug functions [drm:drm_mode_object_put] OBJ ID: 116 (2) [drm:i915_hotplug_work_func] Connector eDP-1 (pin 4) received hotplug event. [drm:drm_mode_object_get] OBJ ID: 114 (4) [drm:intel_dp_detect] [CONNECTOR:101:eDP-1] [drm:drm_mode_object_put] OBJ ID: 114 (5) [drm:drm_mode_object_put] OBJ ID: 101 (7) [drm:drm_mode_object_put] OBJ ID: 101 (6) [drm:drm_mode_object_put] OBJ ID: 114 (4) [drm:drm_mode_object_get] OBJ ID: 101 (6) [drm:drm_mode_object_get] OBJ ID: 101 (7) [drm:drm_mode_object_put] OBJ ID: 101 (7) [drm:drm_mode_object_get] OBJ ID: 101 (6) [drm:drm_handle_vblank] vblank event on 8, current 8 random: fast init done [drm:drm_mode_object_put] OBJ ID: 101 (7) [drm:drm_mode_object_put] OBJ ID: 101 (6) [drm:drm_mode_object_put] OBJ ID: 116 (1) [drm:drm_mode_object_put] OBJ ID: 114 (3) [drm:intel_dp_detect] [CONNECTOR:101:eDP-1] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [drm:intel_dp_print_rates] sink rates: 162000, 270000 [drm:intel_dp_print_rates] common rates: 162000, 270000 [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 snd_hda_codec_realtek hdaudioC0D0: inputs: snd_hda_codec_realtek hdaudioC0D0: Mic=0x12 Console: switching to colour frame buffer device 240x67 [drm:drm_mode_object_get] OBJ ID: 114 (2) [drm:drm_mode_object_get] OBJ ID: 113 (1) [drm:drm_mode_object_put] OBJ ID: 113 (2) [drm:drm_mode_object_get] OBJ ID: 114 (3) [drm:drm_mode_object_put] OBJ ID: 114 (4) [drm:drm_mode_object_get] OBJ ID: 101 (5) [drm:drm_mode_object_get] OBJ ID: 101 (6) [drm:drm_mode_object_put] OBJ ID: 101 (6) [drm:drm_mode_object_get] OBJ ID: 101 (5) [drm:drm_handle_vblank] vblank event on 9, current 9 [drm:drm_mode_object_put] OBJ ID: 101 (6) [drm:drm_mode_object_put] OBJ ID: 101 (5) [drm:drm_mode_object_put] OBJ ID: 113 (1) [drm:drm_mode_object_put] OBJ ID: 114 (3) [drm:vblank_disable_fn] disabling vblank on crtc 0 i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [drm:i915_audio_component_get_eld] Not valid for port B [drm:drm_fb_helper_hotplug_event] [drm:i915_audio_component_get_eld] Not valid for port B [drm:drm_setup_crtcs] [drm:i915_audio_component_get_eld] Not valid for port B [drm:i915_audio_component_get_eld] Not valid for port C [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:eDP-1] [drm:i915_audio_component_get_eld] Not valid for port C usb 1-7: new high-speed USB device number 5 using xhci_hcd [drm:intel_dp_detect] [CONNECTOR:101:eDP-1] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [drm:intel_dp_print_rates] sink rates: 162000, 270000 [drm:i915_audio_component_get_eld] Not valid for port C [drm:intel_dp_print_rates] common rates: 162000, 270000 [drm:i915_audio_component_get_eld] Not valid for port D scsi 0:0:0:0: Direct-Access ATA HFS256G39TND-N21 1P10 PQ: 0 ANSI: 5 [drm:i915_audio_component_get_eld] Not valid for port D [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 sd 0:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB) sd 0:0:0:0: [sdb] 4096-byte physical blocks sd 0:0:0:0: [sdb] Write Protect is off sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [drm:i915_audio_component_get_eld] Not valid for port D sdb: sdb1 sdb2 sdb3 sdb4 sdb5 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.0/sound/card0/input5 sd 0:0:0:0: [sdb] Attached SCSI disk [drm:drm_add_display_info] non_desktop set to 0 input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input6 [drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 8 bpc. input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input7 [drm:drm_mode_object_put] OBJ ID: 115 (1) input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8 [drm:drm_add_edid_modes.part.29] ELD: no CEA Extension found input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9 [drm:drm_add_display_info] non_desktop set to 0 input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10 [drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 8 bpc. [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:eDP-1] probed modes : input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input11 [drm:drm_mode_debug_printmodeline] Modeline 102:"1920x1080" 60 152840 1920 2000 2060 2250 1080 1086 1094 1132 0x48 0xa [drm:intel_power_well_disable] disabling power well 2 [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:HDMI-A-1] [drm:intel_hdmi_detect] [CONNECTOR:108:HDMI-A-1] Waiting for root device PARTUUID=4e87d3c0-f082-4948-8aca-0319ae0ac13d... [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1 [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0 [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:HDMI-A-1] disconnected [drm:drm_setup_crtcs] connector 101 enabled? yes [drm:drm_setup_crtcs] connector 108 enabled? no [drm:intel_fb_initial_config] Not using firmware configuration [drm:drm_setup_crtcs] looking for cmdline mode on connector 101 [drm:drm_setup_crtcs] looking for preferred mode on connector 101 0 [drm:drm_setup_crtcs] found mode 1920x1080 [drm:drm_setup_crtcs] picking CRTCs for 1920x1080 config [drm:drm_mode_object_put] OBJ ID: 101 (4) [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 51 (0,0) [drm:drm_mode_object_get] OBJ ID: 101 (3) [drm:drm_mode_object_get] OBJ ID: 114 (2) [drm:drm_mode_object_get] OBJ ID: 116 (1) [drm:drm_mode_object_put] OBJ ID: 116 (2) [drm:drm_mode_object_get] OBJ ID: 114 (3) [drm:drm_mode_object_put] OBJ ID: 114 (4) [drm:drm_mode_object_get] OBJ ID: 101 (5) [drm:drm_mode_object_get] OBJ ID: 101 (6) [drm:drm_mode_object_put] OBJ ID: 101 (6) [drm:drm_mode_object_get] OBJ ID: 101 (5) [drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0 [drm:drm_handle_vblank] vblank event on 18, current 18 [drm:drm_sysfs_hotplug_event] generating hotplug event [drm:drm_fb_helper_hotplug_event] [drm:drm_setup_crtcs] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:eDP-1] [drm:intel_dp_detect] [CONNECTOR:101:eDP-1] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [drm:intel_dp_print_rates] sink rates: 162000, 270000 [drm:intel_dp_print_rates] common rates: 162000, 270000 [drm:drm_mode_object_put] OBJ ID: 101 (6) [drm:drm_mode_object_put] OBJ ID: 101 (5) [drm:drm_mode_object_put] OBJ ID: 116 (1) [drm:drm_mode_object_put] OBJ ID: 114 (3) [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [drm:drm_add_display_info] non_desktop set to 0 [drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 8 bpc. [drm:drm_mode_object_put] OBJ ID: 113 (1) [drm:drm_add_edid_modes.part.29] ELD: no CEA Extension found [drm:drm_add_display_info] non_desktop set to 0 [drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 8 bpc. [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:eDP-1] probed modes : [drm:drm_mode_debug_printmodeline] Modeline 102:"1920x1080" 60 152840 1920 2000 2060 2250 1080 1086 1094 1132 0x48 0xa [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:HDMI-A-1] [drm:intel_hdmi_detect] [CONNECTOR:108:HDMI-A-1] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1 [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0 [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:HDMI-A-1] disconnected [drm:drm_setup_crtcs] connector 101 enabled? yes [drm:drm_setup_crtcs] connector 108 enabled? no [drm:intel_fb_initial_config] Not using firmware configuration [drm:drm_setup_crtcs] looking for cmdline mode on connector 101 [drm:drm_setup_crtcs] looking for preferred mode on connector 101 0 [drm:drm_setup_crtcs] found mode 1920x1080 [drm:drm_setup_crtcs] picking CRTCs for 1920x1080 config [drm:drm_mode_object_put] OBJ ID: 101 (4) [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 51 (0,0) [drm:drm_mode_object_get] OBJ ID: 101 (3) [drm:drm_mode_object_get] OBJ ID: 114 (2) [drm:drm_mode_object_get] OBJ ID: 115 (1) [drm:drm_mode_object_put] OBJ ID: 115 (2) [drm:drm_mode_object_get] OBJ ID: 114 (3) [drm:drm_mode_object_put] OBJ ID: 114 (4) [drm:drm_mode_object_get] OBJ ID: 101 (5) [drm:drm_mode_object_get] OBJ ID: 101 (6) [drm:drm_mode_object_put] OBJ ID: 101 (6) [drm:drm_mode_object_get] OBJ ID: 101 (5) [drm:drm_handle_vblank] vblank event on 19, current 19 [drm:drm_mode_object_put] OBJ ID: 101 (6) [drm:drm_mode_object_put] OBJ ID: 101 (5) [drm:drm_mode_object_put] OBJ ID: 115 (1) [drm:drm_mode_object_put] OBJ ID: 114 (3) [drm:vblank_disable_fn] disabling vblank on crtc 0 usb 1-7: New USB device found, idVendor=1bcf, idProduct=2cb0, bcdDevice= 0.04 usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-7: Product: HD User Facing usb 1-7: Manufacturer: KS0HD0501382204406LM04 usb 1-9: new full-speed USB device number 6 using xhci_hcd usb 1-9: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02 usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0 scsi 2:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2 sd 2:0:0:0: [sdc] 31367168 512-byte logical blocks: (16.1 GB/15.0 GiB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00 sd 2:0:0:0: [sdc] No Caching mode page found sd 2:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sdc2 sdc3 sd 2:0:0:0: [sdc] Attached SCSI removable disk EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:35. devtmpfs: mounted Freeing unused kernel image memory: 1516K Write protecting the kernel read-only data: 22528k Freeing unused kernel image memory: 2000K Freeing unused kernel image memory: 1368K Run /sbin/init as init process ahci 0000:00:12.0: port does not support device sleep EXT4-fs (sdc3): re-mounted. Opts: user_xattr udevd[185]: starting version 3.2.5 random: udevd: uninitialized urandom read (16 bytes read) random: udevd: uninitialized urandom read (16 bytes read) random: udevd: uninitialized urandom read (16 bytes read) udevd[185]: specified group 'render' unknown udevd[185]: specified group 'kvm' unknown udevd[185]: starting eudev-3.2.5 [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 [drm:intel_power_well_disable] disabling DC off [drm:gen9_enable_dc5] Enabling DC5 [drm:gen9_set_dc_state] Setting DC state from 00 to 01 random: crng init done random: 2 urandom warning(s) missed due to ratelimiting [drm:drm_mode_object_get] OBJ ID: 114 (2) [drm:drm_mode_object_get] OBJ ID: 113 (1) [drm:drm_mode_object_put] OBJ ID: 113 (2) [drm:drm_mode_object_get] OBJ ID: 114 (3) [drm:drm_mode_object_put] OBJ ID: 114 (4) [drm:drm_mode_object_get] OBJ ID: 101 (5) [drm:drm_mode_object_get] OBJ ID: 101 (6) [drm:drm_mode_object_put] OBJ ID: 101 (6) [drm:drm_mode_object_get] OBJ ID: 101 (5) [drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0 [drm:drm_handle_vblank] vblank event on 992, current 992 [drm:drm_mode_object_put] OBJ ID: 101 (6) [drm:drm_mode_object_put] OBJ ID: 101 (5) [drm:drm_mode_object_put] OBJ ID: 113 (1) [drm:drm_mode_object_put] OBJ ID: 114 (3) [drm:vblank_disable_fn] disabling vblank on crtc 0 [drm:drm_mode_object_get] OBJ ID: 114 (2) [drm:drm_mode_object_get] OBJ ID: 115 (1) [drm:drm_mode_object_put] OBJ ID: 115 (2) [drm:drm_mode_object_get] OBJ ID: 114 (3) [drm:drm_mode_object_put] OBJ ID: 114 (4) [drm:drm_mode_object_get] OBJ ID: 101 (5) [drm:drm_mode_object_get] OBJ ID: 101 (6) [drm:drm_mode_object_put] OBJ ID: 101 (6) [drm:drm_mode_object_get] OBJ ID: 101 (5) [drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0 [drm:drm_handle_vblank] vblank event on 1029, current 1029 [drm:drm_mode_object_put] OBJ ID: 101 (6) [drm:drm_mode_object_put] OBJ ID: 101 (5) [drm:drm_mode_object_put] OBJ ID: 115 (1) [drm:drm_mode_object_put] OBJ ID: 114 (3) [drm:vblank_disable_fn] disabling vblank on crtc 0 [drm:drm_mode_object_get] OBJ ID: 114 (2) [drm:drm_mode_object_get] OBJ ID: 113 (1) [drm:drm_mode_object_put] OBJ ID: 113 (2) [drm:drm_mode_object_get] OBJ ID: 114 (3) [drm:drm_mode_object_put] OBJ ID: 114 (4) [drm:drm_mode_object_get] OBJ ID: 101 (5) [drm:drm_mode_object_get] OBJ ID: 101 (6) [drm:drm_mode_object_put] OBJ ID: 101 (6) [drm:drm_mode_object_get] OBJ ID: 101 (5) [drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0 [drm:drm_handle_vblank] vblank event on 9386, current 9386 [drm:vblank_disable_fn] disabling vblank on crtc 0 [drm:drm_mode_object_put] OBJ ID: 101 (6) [drm:drm_mode_object_put] OBJ ID: 101 (5) [drm:drm_mode_object_put] OBJ ID: 113 (1) [drm:drm_mode_object_put] OBJ ID: 114 (3) [drm:drm_mode_object_get] OBJ ID: 114 (2) [drm:drm_mode_object_get] OBJ ID: 115 (1) [drm:drm_mode_object_put] OBJ ID: 115 (2) [drm:drm_mode_object_get] OBJ ID: 114 (3) [drm:drm_mode_object_put] OBJ ID: 114 (4) [drm:drm_mode_object_get] OBJ ID: 101 (5) [drm:drm_mode_object_get] OBJ ID: 101 (6) [drm:drm_mode_object_put] OBJ ID: 101 (6) [drm:drm_mode_object_get] OBJ ID: 101 (5) [drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0 [drm:drm_handle_vblank] vblank event on 9402, current 9402 [drm:drm_mode_object_put] OBJ ID: 101 (6) [drm:drm_mode_object_put] OBJ ID: 101 (5) [drm:drm_mode_object_put] OBJ ID: 115 (1) [drm:drm_mode_object_put] OBJ ID: 114 (3) [drm:vblank_disable_fn] disabling vblank on crtc 0