-- fi-apl-guc

VBT header:
	VBT signature:		"$VBT BROXTON        "
	VBT version:		0x0064 (1.0)
	VBT header size:	0x0030 (48)
	VBT size:		0x180a (6154)
	VBT checksum:		0x95
	BDB offset:		0x00000030 (48)

BDB header:
	BDB signature:		"BIOS_DATA_BLOCK "
	BDB version:		207
	BDB header size:	0x0016 (22)
	BDB size:		0x17d9 (6105)

BDB blocks present:
	  1   2   3   6   7   8   9  10  12  13  17  18  20  26  27  28
	 31  32  40  41  42  43  44  46  51  52  54 252 253 254

BDB block 1 - General features block:
	Panel fitting: text & graphics
	Flexaim: yes
	Message: yes
	Clear screen: 0
	DVO color flip required: no
	External VBT: no
	Enable SSC: no
	LFP on override: no
	Disable SSC on clone: no
	Underscan support for VGA timings: no
	Dynamic CD clock: yes
	Hotplug support in VBIOS: no
	Disable smooth vision: no
	Single DVI for CRT/DVI: no
	Enable 180 degree rotation: no
	Inverted FDI Rx polarity: no
	Extended VBIOS mode: no
	Copy iLFP DTD to SDVO LVDS DTD: no
	Best fit panel timing algorithm: no
	Ignore strap state: no
	Legacy monitor detect: yes
	Integrated CRT: no
	Integrated TV: no
	Integrated EFP: no
	DP SSC enable: no
	DP SSC dongle supported: no

BDB block 2 - General definitions block:
	CRT DDC GMBUS addr: 0x02
	Use ACPI DPMS CRT power states: no
	Skip CRT detect at boot: no
	Use DPMS on AIM devices: yes
	Boot display type: 0x0000
	Child device size: 38
	Child device count: 8
	Child device info:
		Device handle: 0x0004 (EFP 1 (HDMI/DVI/DP))
		Device type: 0x60d6 (DisplayPort/HDMI/DVI)
			Power management
			Hotplug signaling
			HDMI output
			Content protection
			High speed link
			TMDS/DVI signaling
			DisplayPort output
			Digital output
		I2C speed: 0x00
		DP onboard redriver: 0x10
		DP ondock redriver: 0x10
		HDMI level shifter value: 0x00
		HDMI max data rate: 0x00
		Offset to DTD buffer for edidless CHILD: 0x8ea
		Edidless EFP: no
		Compression enable: no
		Compression method CPS: no
		Dual pipe ganged eDP: no
		Compression structure index: 0x00)
		Slave DDI port: 0x20 (unknown)
		AIM offset: 0
		DVO Port: 0x07 (DP-B)
		AIM I2C pin: 0x00
		AIM Slave address: 0x00
		DDC pin: 0x01
		EDID buffer ptr: 0x00
		DVO config: 0x00
		EFP routed through dock: no
		Lane reversal: no
		Onboard LSPCON: yes
		Iboost enable: no
		HPD sense invert: yes
		HDMI compatible? no
		DP compatible? no
		TMDS compatible? no
		Aux channel: 0x10
		Dongle detect: 0x01
		Pipe capabilities: 0x00
		SDVO stall signal available: no
		Hotplug connect status: 0x00
		Integrated encoder instead of SDVO: yes
		DVO wiring: 0x01
		MIPI bridge type: 00 (unknown)
		Device class extension: 0x00
		DVO function: 0x00
		DP USB type C support: no
		2X DP GPIO index: 0x00
		2X DP GPIO pin number: 0x00
		IBoost level for HDMI: 0x00
		IBoost level for DP/eDP: 0x00
	Child device info:
		Device handle: 0x0040 (EFP 2 (HDMI/DVI/DP))
		Device type: 0x68c6 (DisplayPort)
			Power management
			Hotplug signaling
			Content protection
			High speed link
			DisplayPort output
			Digital output
		I2C speed: 0x00
		DP onboard redriver: 0x10
		DP ondock redriver: 0x10
		HDMI level shifter value: 0x00
		HDMI max data rate: 0x00
		Offset to DTD buffer for edidless CHILD: 0x8fc
		Edidless EFP: no
		Compression enable: no
		Compression method CPS: no
		Dual pipe ganged eDP: no
		Compression structure index: 0x00)
		Slave DDI port: 0x20 (unknown)
		AIM offset: 0
		DVO Port: 0x08 (DP-C)
		AIM I2C pin: 0x00
		AIM Slave address: 0x00
		DDC pin: 0x02
		EDID buffer ptr: 0x00
		DVO config: 0x00
		EFP routed through dock: no
		Lane reversal: no
		Onboard LSPCON: no
		Iboost enable: no
		HPD sense invert: yes
		HDMI compatible? no
		DP compatible? no
		TMDS compatible? no
		Aux channel: 0x20
		Dongle detect: 0x01
		Pipe capabilities: 0x00
		SDVO stall signal available: no
		Hotplug connect status: 0x00
		Integrated encoder instead of SDVO: yes
		DVO wiring: 0x01
		MIPI bridge type: 00 (unknown)
		Device class extension: 0x00
		DVO function: 0x00
		DP USB type C support: no
		2X DP GPIO index: 0x00
		2X DP GPIO pin number: 0x00
		IBoost level for HDMI: 0x00
		IBoost level for DP/eDP: 0x00

BDB block 3 - Unknown, no decoding available:

BDB block 6 - Unknown, no decoding available:

BDB block 7 - Unknown, no decoding available:

BDB block 8 - Unknown, no decoding available:

BDB block 9 - PSR block:
	Panel 0 *
		Full link: no
		Require AUX to wakeup: no
		Lines to wait before link standby: 0
		Idle frames to for PSR enable: 0
		TP1 wakeup time: 200 usec (0x2)
		TP2/TP3 wakeup time: 200 usec (0x2)

BDB block 10 - Unknown, no decoding available:

BDB block 12 - Driver feature data block:
	Boot Device Algorithm: os default
	Block display switching when DVD active: yes
	Allow display switching when in Full Screen DOS: no
	Hot Plug DVO: yes
	Dual View Zoom: no
	Driver INT 15h hook: no
	Enable Sprite in Clone Mode: yes
	Use 00000110h ID for Primary LFP: no
	Boot Mode X: 1024
	Boot Mode Y: 768
	Boot Mode Bpp: 8
	Boot Mode Refresh: 60
	Enable LFP as primary: no
	Selective Mode Pruning: no
	Dual-Frequency Graphics Technology: yes
	Default Render Clock Frequency: high
	NT 4.0 Dual Display Clone Support: no
	Default Power Scheme user interface: CUI
	Sprite Display Assignment when Overlay is Active in Clone Mode: secondary
	Display Maintain Aspect Scaling via CUI: yes
	Preserve Aspect Ratio: no
	Enable SDVO device power down: no
	CRT hotplug: yes
	LVDS config: Embedded DisplayPort
	Define Display statically: no
	Legacy CRT max X: 0
	Legacy CRT max Y: 0
	Legacy CRT max refresh: 85
	Enable DRRS: yes
	Enable PSR: yes

BDB block 13 - Unknown, no decoding available:

BDB block 17 - Unknown, no decoding available:

BDB block 18 - Unknown, no decoding available:

BDB block 20 - Unknown, no decoding available:

BDB block 26 - Unknown, no decoding available:

BDB block 27 - eDP block:
	Panel 0 *
		Power Sequence: T3 2000 T7 10 T9 2000 T10 500 T12 5000
		Panel color depth: 18 bpp
		eDP sDRRS MSA Delay: Lane 1
		Fast link params:
			rate: 1.62G
			lanes: x1 mode
			pre-emphasis: none
			vswing: 0.4V
		Stereo 3D feature: no
		T3 optimization: yes
		Vswing/preemphasis table selection: Default (400 mV)
		Fast link training: no
		DPCD 600h write required: no
		PWM delays:
			PWM on to backlight enable: 0
			Backlight disable to PWM off: 0
		Full link params provided: no
		Full link params:
			pre-emphasis: none
			vswing: 0.4V

BDB block 28 - Unknown, no decoding available:

BDB block 31 - Unknown, no decoding available:

BDB block 32 - Unknown, no decoding available:

BDB block 40 - LVDS options block:
	Panel type: 0
	LVDS EDID available: no
	Pixel dither: yes
	PFIT auto ratio: yes
	PFIT enhanced graphics mode: no
	PFIT enhanced text mode: no
	PFIT mode: 3

BDB block 41 - LVDS timing pointer data:
	Number of entries: 3

BDB block 42 - LVDS panel data block:
   Number of entries: 19 (preferred block marked with '*')
*	panel type 00: 640x480 clock 148350000
		info:
		  LVDS: 0x00000300
		  PP_ON_DELAYS: 0x025807d0
		  PP_OFF_DELAYS: 0x01f407d0
		  PP_DIVISOR: 0x00270f05
		  PFIT: 0xb0707880
		timings: 1920 1960 2000 2040 1200 1204 1208 1212 148350.00 (good)

BDB block 43 - Backlight info block:
	Inverter type: 2
	     polarity: 0
	     PWM freq: 200
	Minimum brightness: 0

BDB block 44 - Unknown, no decoding available:

BDB block 46 - Unknown, no decoding available:

BDB block 51 - Unknown, no decoding available:

BDB block 52 - MIPI configuration block:
	General Param
		 BTA disable: Enabled
		 Panel Rotation: 0 degrees
		 Video Mode Color Format: RGB888
		 PPS GPIO Pins: Using PMIC
		 CABC Support: not supported
		 Mode: VIDEO
		 Video transfer mode: non-burst with sync events (0x2)
		 Dithering: done in Panel Controller
	Port Desc
		 Pixel overlap: 0
		 Lane Count: 4
		 Dual Link Support: not supported
	Dphy Flags
		 Clock Stop: DISABLED
		 EOT disabled: EOT to be sent

	HSTxTimeOut: 0x3fffff
	LPRXTimeOut: 0xffff
	TurnAroundTimeOut: 0x14
	DeviceResetTimer: 0xff
	MasterinitTimer: 0x7d0
	DBIBandwidthTimer: 0x0
	LpByteClkValue: 0x4

	Dphy Params
		Exit to zero Count: 0x3f
		Trail Count: 0x1F
		Clk zero count: 0x7f
		Prepare count:0xf

	ClockLaneSwitchingCount: 0xa0014
	HighToLowSwitchingCount: 0x46

	Timings based on Dphy spec
		TClkMiss: 0x3c
		TClkPost: 0x3c
		TClkPre: 0x8
		TClkPrepare: 0x32
		TClkSettle: 0x69
		TClkTermEnable: 0x26

	TClkTrail: 0x46
	TClkPrepareTClkZero: 0x136
	THSExit: 0x6e
	THsPrepare: 0x32
	THsPrepareTHsZero: 0xc8
	THSSettle: 0x5f
	THSSkip: 0x28
	THsTrail: 0x3c
	TInit: 0x0
	TLPX: 0x32
	MIPI PPS
		Panel power ON delay: 500
		Panel power on to Backlight enable delay: 500
		Backlight disable to Panel power OFF delay: 500
		Panel power OFF delay: 500
		Panel power cycle delay: 5000

BDB block 54 - Unknown, no decoding available:

BDB block 252 - Unknown, no decoding available:

BDB block 253 - Unknown, no decoding available:

BDB block 254 - Unknown, no decoding available: