[ 0.000000] Linux version 4.19.0-arch1-1-custom (arf@Brimstone) (gcc version 8.2.1 20180831 (GCC)) #2 SMP PREEMPT Fri Nov 2 00:11:24 EDT 2018 [ 0.000000] Command line: BOOT_IMAGE=../vmlinuz-linux-custom root=/dev/mapper/BrimstoneARCH-ROOT rw radeon.cik_support=0 amdgpu.cik_support=1 initrd=../initramfs-linux-custom.img [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdf09fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdf0a000-0x00000000be4e7fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be4e8000-0x00000000be8d7fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be8d8000-0x00000000bee2afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bee2b000-0x00000000bee2bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bee2c000-0x00000000bf031fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf032000-0x00000000bf452fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf453000-0x00000000bf7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7f4000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000063fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.50 11/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3292.800 MHz processor [ 0.002988] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002989] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.009061] AGP: No AGP bridge found [ 0.009116] last_pfn = 0x640000 max_arch_pfn = 0x400000000 [ 0.009119] MTRR default type: uncachable [ 0.009120] MTRR fixed ranges enabled: [ 0.009121] 00000-9FFFF write-back [ 0.009121] A0000-BFFFF write-through [ 0.009122] C0000-CFFFF write-protect [ 0.009123] D0000-EAFFF uncachable [ 0.009123] EB000-FFFFF write-protect [ 0.009124] MTRR variable ranges enabled: [ 0.009125] 0 base 000000000000 mask FFFF80000000 write-back [ 0.009126] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.009127] 2 base 0000BF800000 mask FFFFFF800000 uncachable [ 0.009128] 3 disabled [ 0.009128] 4 disabled [ 0.009128] 5 disabled [ 0.009129] 6 disabled [ 0.009129] 7 disabled [ 0.009130] TOM2: 0000000640000000 aka 25600M [ 0.010316] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.010392] total RAM covered: 3064M [ 0.010906] Found optimal setting for mtrr clean up [ 0.010907] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G [ 0.011960] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.011965] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.014847] found SMP MP-table at [mem 0x000fd9c0-0x000fd9cf] mapped at [(____ptrval____)] [ 0.044269] Scanning 1 areas for low memory corruption [ 0.044272] Base memory trampoline at [(____ptrval____)] 98000 size 24576 [ 0.044274] Using GB pages for direct mapping [ 0.044276] BRK [0x321801000, 0x321801fff] PGTABLE [ 0.044278] BRK [0x321802000, 0x321802fff] PGTABLE [ 0.044279] BRK [0x321803000, 0x321803fff] PGTABLE [ 0.044338] BRK [0x321804000, 0x321804fff] PGTABLE [ 0.044587] BRK [0x321805000, 0x321805fff] PGTABLE [ 0.044647] BRK [0x321806000, 0x321806fff] PGTABLE [ 0.044717] BRK [0x321807000, 0x321807fff] PGTABLE [ 0.044802] BRK [0x321808000, 0x321808fff] PGTABLE [ 0.044897] BRK [0x321809000, 0x321809fff] PGTABLE [ 0.044980] BRK [0x32180a000, 0x32180afff] PGTABLE [ 0.045211] RAMDISK: [mem 0x7f195000-0x7fffffff] [ 0.045216] ACPI: Early table checksum verification disabled [ 0.057111] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.057114] ACPI: XSDT 0x00000000BE8C8070 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.057119] ACPI: FACP 0x00000000BE8CE5F8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.057123] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180810/tbfadt-624) [ 0.057127] ACPI: DSDT 0x00000000BE8C8170 006483 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.057130] ACPI: FACS 0x00000000BE8D1080 000040 [ 0.057132] ACPI: APIC 0x00000000BE8CE708 00008E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.057134] ACPI: FPDT 0x00000000BE8CE798 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.057137] ACPI: MCFG 0x00000000BE8CE7E0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.057139] ACPI: AAFT 0x00000000BE8CE820 00008A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.057142] ACPI: HPET 0x00000000BE8CE8B0 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.057144] ACPI: SSDT 0x00000000BE8CE8E8 000E10 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.057146] ACPI: IVRS 0x00000000BE8CF6F8 000100 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.057155] ACPI: Local APIC address 0xfee00000 [ 0.057214] Scanning NUMA topology in Northbridge 24 [ 0.057233] No NUMA configuration found [ 0.057233] Faking a node at [mem 0x0000000000000000-0x000000063fffffff] [ 0.057236] NODE_DATA(0) allocated [mem 0x63fffa000-0x63fffdfff] [ 0.057273] Zone ranges: [ 0.057273] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.057274] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.057275] Normal [mem 0x0000000100000000-0x000000063fffffff] [ 0.057276] Device empty [ 0.057278] Movable zone start for each node [ 0.057278] Early memory node ranges [ 0.057279] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.057280] node 0: [mem 0x0000000000100000-0x00000000bdf09fff] [ 0.057281] node 0: [mem 0x00000000bee2b000-0x00000000bee2bfff] [ 0.057281] node 0: [mem 0x00000000bf032000-0x00000000bf452fff] [ 0.057282] node 0: [mem 0x00000000bf7f4000-0x00000000bf7fffff] [ 0.057282] node 0: [mem 0x0000000100001000-0x000000063fffffff] [ 0.057378] Reserved but unavailable: 7468 pages [ 0.057380] Initmem setup node 0 [mem 0x0000000000001000-0x000000063fffffff] [ 0.057382] On node 0 totalpages: 6283988 [ 0.057382] DMA zone: 64 pages used for memmap [ 0.057383] DMA zone: 21 pages reserved [ 0.057384] DMA zone: 3997 pages, LIFO batch:0 [ 0.057457] DMA32 zone: 12109 pages used for memmap [ 0.057458] DMA32 zone: 774968 pages, LIFO batch:63 [ 0.074501] Normal zone: 86016 pages used for memmap [ 0.074502] Normal zone: 5505023 pages, LIFO batch:63 [ 0.191579] ACPI: PM-Timer IO Port: 0x808 [ 0.191580] ACPI: Local APIC address 0xfee00000 [ 0.191587] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.191614] IOAPIC[0]: apic_id 7, version 33, address 0xfec00000, GSI 0-23 [ 0.191617] IOAPIC[1]: apic_id 8, version 33, address 0xfec20000, GSI 24-55 [ 0.191618] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.191620] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.191621] ACPI: IRQ0 used by override. [ 0.191622] ACPI: IRQ9 used by override. [ 0.191623] Using ACPI (MADT) for SMP configuration information [ 0.191624] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.191628] smpboot: Allowing 6 CPUs, 0 hotplug CPUs [ 0.191649] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.191650] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.191651] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.191651] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.191652] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.191654] PM: Registered nosave memory: [mem 0xbdf0a000-0xbe4e7fff] [ 0.191654] PM: Registered nosave memory: [mem 0xbe4e8000-0xbe8d7fff] [ 0.191655] PM: Registered nosave memory: [mem 0xbe8d8000-0xbee2afff] [ 0.191656] PM: Registered nosave memory: [mem 0xbee2c000-0xbf031fff] [ 0.191657] PM: Registered nosave memory: [mem 0xbf453000-0xbf7f3fff] [ 0.191658] PM: Registered nosave memory: [mem 0xbf800000-0xfebfffff] [ 0.191659] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.191660] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.191660] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.191661] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] [ 0.191662] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff] [ 0.191662] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff] [ 0.191663] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.191663] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff] [ 0.191664] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff] [ 0.191664] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] [ 0.191665] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.191665] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff] [ 0.191666] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff] [ 0.191666] PM: Registered nosave memory: [mem 0x100000000-0x100000fff] [ 0.191669] [mem 0xbf800000-0xfebfffff] available for PCI devices [ 0.191669] Booting paravirtualized kernel on bare hardware [ 0.191672] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.301384] random: get_random_bytes called from start_kernel+0x95/0x53a with crng_init=0 [ 0.301391] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:6 nr_node_ids:1 [ 0.302055] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144 [ 0.302060] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.302062] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.302082] Built 1 zonelists, mobility grouping on. Total pages: 6185778 [ 0.302083] Policy zone: Normal [ 0.302085] Kernel command line: BOOT_IMAGE=../vmlinuz-linux-custom root=/dev/mapper/BrimstoneARCH-ROOT rw radeon.cik_support=0 amdgpu.cik_support=1 initrd=../initramfs-linux-custom.img [ 0.317270] AGP: Checking aperture... [ 0.323336] AGP: No AGP bridge found [ 0.323339] AGP: Node 0: aperture [bus addr 0xb4000000-0xb5ffffff] (32MB) [ 0.323340] Aperture pointing to e820 RAM. Ignoring. [ 0.323340] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.323341] AGP: Please enable the IOMMU option in the BIOS setup [ 0.323341] AGP: This costs you 64MB of RAM [ 0.323344] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) [ 0.323346] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] [ 0.444223] Memory: 24566440K/25135952K available (12300K kernel code, 1373K rwdata, 3640K rodata, 1512K init, 3884K bss, 569512K reserved, 0K cma-reserved) [ 0.444357] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.444359] ftrace: allocating 35517 entries in 139 pages [ 0.455611] rcu: Preemptible hierarchical RCU implementation. [ 0.455612] rcu: CONFIG_RCU_FANOUT set to non-default value of 32. [ 0.455613] rcu: RCU dyntick-idle grace-period acceleration is enabled. [ 0.455613] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=6. [ 0.455614] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.455615] Tasks RCU enabled. [ 0.455615] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.457174] NR_IRQS: 20736, nr_irqs: 1016, preallocated irqs: 16 [ 0.457420] rcu: Offload RCU callbacks from CPUs: (none). [ 0.458966] Console: colour VGA+ 80x25 [ 0.458971] console [tty0] enabled [ 0.458992] ACPI: Core revision 20180810 [ 0.459135] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.459146] hpet clockevent registered [ 0.459149] APIC: Switch to symmetric I/O mode setup [ 0.508426] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.522484] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f76bafef0e, max_idle_ns: 440795256421 ns [ 0.522493] Calibrating delay loop (skipped), value calculated using timer frequency.. 6588.00 BogoMIPS (lpj=10976000) [ 0.522496] pid_max: default: 32768 minimum: 301 [ 0.522535] Security Framework initialized [ 0.522536] Yama: becoming mindful. [ 0.522540] AppArmor: AppArmor disabled by boot time parameter [ 0.531932] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.536716] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.536893] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.537046] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.537296] mce: CPU supports 6 MCE banks [ 0.537303] LVT offset 0 assigned for vector 0xf9 [ 0.537308] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.537308] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.537310] Spectre V2 : Mitigation: Full AMD retpoline [ 0.537311] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.541899] Freeing SMP alternatives memory: 28K [ 0.545819] smpboot: CPU0: AMD Phenom(tm) II X6 1100T Processor (family: 0x10, model: 0xa, stepping: 0x0) [ 0.562526] Performance Events: AMD PMU driver. [ 0.562539] ... version: 0 [ 0.562542] ... bit width: 48 [ 0.562543] ... generic registers: 4 [ 0.562546] ... value mask: 0000ffffffffffff [ 0.562548] ... max period: 00007fffffffffff [ 0.562550] ... fixed-purpose events: 0 [ 0.562551] ... event mask: 000000000000000f [ 0.569180] rcu: Hierarchical SRCU implementation. [ 0.592554] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.599203] smp: Bringing up secondary CPUs ... [ 0.639216] x86: Booting SMP configuration: [ 0.639220] .... node #0, CPUs: #1 #2 #3 #4 #5 [ 0.815892] smp: Brought up 1 node, 6 CPUs [ 0.815892] smpboot: Max logical packages: 1 [ 0.815892] smpboot: Total of 6 processors activated (39529.00 BogoMIPS) [ 0.820268] devtmpfs: initialized [ 0.820268] x86/mm: Memory block size: 128MB [ 0.820973] PM: Registering ACPI NVS region [mem 0xbe4e8000-0xbe8d7fff] (4128768 bytes) [ 0.820973] PM: Registering ACPI NVS region [mem 0xbee2c000-0xbf031fff] (2121728 bytes) [ 0.822528] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.822528] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.822583] pinctrl core: initialized pinctrl subsystem [ 0.822696] RTC time: 12:20:06, date: 11/04/18 [ 0.823557] NET: Registered protocol family 16 [ 0.823643] audit: initializing netlink subsys (disabled) [ 0.823650] audit: type=2000 audit(1541334005.319:1): state=initialized audit_enabled=0 res=1 [ 0.823650] cpuidle: using governor ladder [ 0.825908] cpuidle: using governor menu [ 0.825908] node 0 link 0: io port [a000, ffff] [ 0.825908] TOM: 00000000c0000000 aka 3072M [ 0.825908] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.825908] node 0 link 0: mmio [c0000000, fef0ffff] ==> [c0000000, dfffffff] and [f0000000, fef0ffff] [ 0.825908] TOM2: 0000000640000000 aka 25600M [ 0.825908] bus: [bus 00-1f] on node 0 link 0 [ 0.825908] bus: 00 [io 0x0000-0xffff] [ 0.825908] bus: 00 [mem 0xc0000000-0xdfffffff] [ 0.825908] bus: 00 [mem 0xf0000000-0xffffffff] [ 0.825908] bus: 00 [mem 0x640000000-0xfcffffffff] [ 0.825917] ACPI: bus type PCI registered [ 0.825917] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.825946] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.825953] PCI: not using MMCONFIG [ 0.825954] PCI: Using configuration type 1 for base access [ 0.825954] PCI: Using configuration type 1 for extended access [ 0.827007] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.827007] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.827007] ACPI: Added _OSI(Module Device) [ 0.827007] ACPI: Added _OSI(Processor Device) [ 0.827007] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.827007] ACPI: Added _OSI(Processor Aggregator Device) [ 0.827007] ACPI: Added _OSI(Linux-Dell-Video) [ 0.827007] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.832711] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.834133] ACPI: Interpreter enabled [ 0.834133] ACPI: (supports S0 S3 S4 S5) [ 0.834133] ACPI: Using IOAPIC for interrupt routing [ 0.834133] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.834133] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.834133] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.834133] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.841549] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.841554] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.841558] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.841899] PCI host bridge to bus 0000:00 [ 0.841901] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.841902] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.841903] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.841904] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.841905] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.841906] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.841907] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] [ 0.841909] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.841917] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.842023] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.842117] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.842132] pci 0000:00:02.0: enabling Extended Tags [ 0.842149] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.842227] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 0.842241] pci 0000:00:04.0: enabling Extended Tags [ 0.842258] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.842342] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 [ 0.842356] pci 0000:00:05.0: enabling Extended Tags [ 0.842495] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.842579] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 [ 0.842593] pci 0000:00:06.0: enabling Extended Tags [ 0.842611] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.842694] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.842708] pci 0000:00:09.0: enabling Extended Tags [ 0.842725] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.842817] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 [ 0.842831] pci 0000:00:0a.0: enabling Extended Tags [ 0.842849] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.842933] pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400 [ 0.842947] pci 0000:00:0d.0: enabling Extended Tags [ 0.842969] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold [ 0.843054] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.843069] pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097] [ 0.843075] pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083] [ 0.843082] pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077] [ 0.843088] pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063] [ 0.843122] pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f] [ 0.843129] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff] [ 0.843226] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.843238] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff] [ 0.843347] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.843361] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff] [ 0.843417] pci 0000:00:12.2: supports D1 D2 [ 0.843418] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.843496] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.843508] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff] [ 0.843617] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.843631] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff] [ 0.843687] pci 0000:00:13.2: supports D1 D2 [ 0.843688] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.843766] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.843878] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.843890] pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047] [ 0.843896] pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033] [ 0.843903] pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027] [ 0.843909] pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013] [ 0.843915] pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f] [ 0.843929] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.843930] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.843931] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.843932] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.844006] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.844023] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit] [ 0.844070] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.844143] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.844259] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.844353] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.844366] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff] [ 0.844475] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.844488] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff] [ 0.844598] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.844613] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff] [ 0.844669] pci 0000:00:16.2: supports D1 D2 [ 0.844670] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.844744] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.844811] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.844876] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.844940] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.845005] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.845106] pci 0000:01:00.0: [1002:67b1] type 00 class 0x030000 [ 0.845128] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.845137] pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref] [ 0.845143] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.845149] pci 0000:01:00.0: reg 0x24: [mem 0xfea00000-0xfea3ffff] [ 0.845155] pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref] [ 0.845160] pci 0000:01:00.0: enabling Extended Tags [ 0.845208] pci 0000:01:00.0: supports D1 D2 [ 0.845209] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.845247] pci 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8 GT/s x16 link) [ 0.845285] pci 0000:01:00.1: [1002:aac8] type 00 class 0x040300 [ 0.845304] pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit] [ 0.845334] pci 0000:01:00.1: enabling Extended Tags [ 0.845372] pci 0000:01:00.1: supports D1 D2 [ 0.845438] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.845441] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.845443] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.845445] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd07fffff 64bit pref] [ 0.845474] pci 0000:02:00.0: [1b4b:91a0] type 00 class 0x01018f [ 0.845486] pci 0000:02:00.0: reg 0x10: [io 0xd090-0xd097] [ 0.845492] pci 0000:02:00.0: reg 0x14: [io 0xd080-0xd083] [ 0.845497] pci 0000:02:00.0: reg 0x18: [io 0xd070-0xd077] [ 0.845502] pci 0000:02:00.0: reg 0x1c: [io 0xd060-0xd063] [ 0.845508] pci 0000:02:00.0: reg 0x20: [io 0xd050-0xd05f] [ 0.845513] pci 0000:02:00.0: reg 0x24: [mem 0xfe915000-0xfe9157ff] [ 0.845518] pci 0000:02:00.0: reg 0x30: [mem 0xfe900000-0xfe90ffff pref] [ 0.845528] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1 [ 0.845549] pci 0000:02:00.0: PME# supported from D3hot [ 0.845629] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.845632] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.845633] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.845664] pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.845683] pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe807fff 64bit] [ 0.845717] pci 0000:03:00.0: enabling Extended Tags [ 0.845755] pci 0000:03:00.0: supports D1 D2 [ 0.845756] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.845859] pci 0000:00:05.0: PCI bridge to [bus 03] [ 0.845862] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.845895] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.845916] pci 0000:04:00.0: reg 0x10: [mem 0xfe700000-0xfe707fff 64bit] [ 0.845951] pci 0000:04:00.0: enabling Extended Tags [ 0.845990] pci 0000:04:00.0: supports D1 D2 [ 0.845991] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.846059] pci 0000:00:06.0: PCI bridge to [bus 04] [ 0.846062] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.846106] pci 0000:05:00.0: [1106:3403] type 00 class 0x0c0010 [ 0.846128] pci 0000:05:00.0: reg 0x10: [mem 0xfe610000-0xfe6107ff 64bit] [ 0.846136] pci 0000:05:00.0: reg 0x18: [io 0xc000-0xc0ff] [ 0.846208] pci 0000:05:00.0: supports D2 [ 0.846209] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold [ 0.846280] pci 0000:05:00.1: [1106:0415] type 00 class 0x010185 [ 0.846299] pci 0000:05:00.1: reg 0x10: [io 0xc140-0xc147] [ 0.846311] pci 0000:05:00.1: reg 0x14: [io 0xc130-0xc133] [ 0.846318] pci 0000:05:00.1: reg 0x18: [io 0xc120-0xc127] [ 0.846326] pci 0000:05:00.1: reg 0x1c: [io 0xc110-0xc113] [ 0.846334] pci 0000:05:00.1: reg 0x20: [io 0xc100-0xc10f] [ 0.846348] pci 0000:05:00.1: reg 0x30: [mem 0xfe600000-0xfe60ffff pref] [ 0.846391] pci 0000:05:00.1: supports D2 [ 0.846392] pci 0000:05:00.1: PME# supported from D2 D3hot D3cold [ 0.855880] pci 0000:00:09.0: PCI bridge to [bus 05] [ 0.855891] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] [ 0.855897] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.856029] pci 0000:06:00.0: [14e4:16b1] type 00 class 0x020000 [ 0.856055] pci 0000:06:00.0: reg 0x10: [mem 0xd0910000-0xd091ffff 64bit pref] [ 0.856068] pci 0000:06:00.0: reg 0x18: [mem 0xd0900000-0xd090ffff 64bit pref] [ 0.856091] pci 0000:06:00.0: reg 0x30: [mem 0xfe500000-0xfe5007ff pref] [ 0.856160] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.856262] pci 0000:00:0a.0: PCI bridge to [bus 06] [ 0.856265] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 0.856268] pci 0000:00:0a.0: bridge window [mem 0xd0900000-0xd09fffff 64bit pref] [ 0.856305] pci 0000:07:00.0: [104c:8231] type 01 class 0x060400 [ 0.856404] pci 0000:07:00.0: supports D1 D2 [ 0.856455] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.856462] pci 0000:00:0d.0: PCI bridge to [bus 07-08] [ 0.856464] pci 0000:00:0d.0: bridge window [io 0xb000-0xbfff] [ 0.856465] pci 0000:00:0d.0: bridge window [mem 0xfe400000-0xfe4fffff] [ 0.856502] pci_bus 0000:08: extended config space not accessible [ 0.856520] pci 0000:08:00.0: [1415:9501] type 00 class 0x070006 [ 0.856540] pci 0000:08:00.0: reg 0x10: [io 0xb040-0xb05f] [ 0.856551] pci 0000:08:00.0: reg 0x14: [mem 0xfe402000-0xfe402fff] [ 0.856561] pci 0000:08:00.0: reg 0x18: [io 0xb020-0xb03f] [ 0.856572] pci 0000:08:00.0: reg 0x1c: [mem 0xfe401000-0xfe401fff] [ 0.856663] pci 0000:08:00.0: supports D2 [ 0.856663] pci 0000:08:00.0: PME# supported from D0 D2 D3hot [ 0.856707] pci 0000:08:00.1: [1415:9513] type 00 class 0x070101 [ 0.856727] pci 0000:08:00.1: reg 0x10: [io 0xb070-0xb077] [ 0.856737] pci 0000:08:00.1: reg 0x14: [io 0xb060-0xb067] [ 0.856748] pci 0000:08:00.1: reg 0x18: [io 0xb000-0xb01f] [ 0.856759] pci 0000:08:00.1: reg 0x1c: [mem 0xfe400000-0xfe400fff] [ 0.856821] pci 0000:08:00.1: supports D2 [ 0.856821] pci 0000:08:00.1: PME# supported from D0 D2 D3hot [ 0.856908] pci 0000:07:00.0: PCI bridge to [bus 08] [ 0.856913] pci 0000:07:00.0: bridge window [io 0xb000-0xbfff] [ 0.856917] pci 0000:07:00.0: bridge window [mem 0xfe400000-0xfe4fffff] [ 0.856935] pci_bus 0000:09: extended config space not accessible [ 0.856961] pci 0000:09:06.0: [1102:0004] type 00 class 0x040100 [ 0.856976] pci 0000:09:06.0: reg 0x10: [io 0xa000-0xa01f] [ 0.857050] pci 0000:09:06.0: supports D1 D2 [ 0.857084] pci 0000:09:06.1: [1102:7003] type 00 class 0x098000 [ 0.857098] pci 0000:09:06.1: reg 0x10: [io 0xa020-0xa027] [ 0.857172] pci 0000:09:06.1: supports D1 D2 [ 0.857207] pci 0000:09:06.2: [1102:4001] type 00 class 0x0c0010 [ 0.857224] pci 0000:09:06.2: reg 0x10: [mem 0xfe304000-0xfe3047ff] [ 0.857234] pci 0000:09:06.2: reg 0x14: [mem 0xfe300000-0xfe303fff] [ 0.857306] pci 0000:09:06.2: supports D1 D2 [ 0.857307] pci 0000:09:06.2: PME# supported from D0 D1 D2 D3hot [ 0.857373] pci 0000:00:14.4: PCI bridge to [bus 09] (subtractive decode) [ 0.857376] pci 0000:00:14.4: bridge window [io 0xa000-0xafff] [ 0.857378] pci 0000:00:14.4: bridge window [mem 0xfe300000-0xfe3fffff] [ 0.857381] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.857382] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.857383] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.857384] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.857385] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.857386] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.857387] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.858043] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11 14 15) *0 [ 0.858115] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11 14 15) *0 [ 0.858188] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11 14 15) *0 [ 0.858261] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11 14 15) *0 [ 0.858322] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11 14 15) *0 [ 0.858370] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0 [ 0.858417] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0 [ 0.858465] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11 14 15) *0 [ 0.858661] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.858661] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.858661] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.858661] vgaarb: loaded [ 0.858661] ACPI: bus type USB registered [ 0.858661] usbcore: registered new interface driver usbfs [ 0.858661] usbcore: registered new interface driver hub [ 0.858661] usbcore: registered new device driver usb [ 0.858661] pps_core: LinuxPPS API ver. 1 registered [ 0.858661] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.858661] PTP clock support registered [ 0.858661] EDAC MC: Ver: 3.0.0 [ 0.859196] PCI: Using ACPI for IRQ routing [ 0.865360] PCI: pci_cache_line_size set to 64 bytes [ 0.865432] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.865433] e820: reserve RAM buffer [mem 0xbdf0a000-0xbfffffff] [ 0.865434] e820: reserve RAM buffer [mem 0xbee2c000-0xbfffffff] [ 0.865435] e820: reserve RAM buffer [mem 0xbf453000-0xbfffffff] [ 0.865435] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] [ 0.865523] NetLabel: Initializing [ 0.865524] NetLabel: domain hash size = 128 [ 0.865524] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.865535] NetLabel: unlabeled traffic allowed by default [ 0.865543] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.865543] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.867927] clocksource: Switched to clocksource tsc-early [ 0.877419] VFS: Disk quotas dquot_6.6.0 [ 0.877441] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.877518] pnp: PnP ACPI init [ 0.877698] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.877703] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.877832] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.877839] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.877919] system 00:02: [mem 0xfeb20000-0xfeb23fff] could not be reserved [ 0.877921] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.878259] system 00:03: [io 0x040b] has been reserved [ 0.878260] system 00:03: [io 0x04d6] has been reserved [ 0.878262] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.878263] system 00:03: [io 0x0c14] has been reserved [ 0.878264] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.878264] system 00:03: [io 0x0c52] has been reserved [ 0.878265] system 00:03: [io 0x0c6c] has been reserved [ 0.878266] system 00:03: [io 0x0c6f] has been reserved [ 0.878267] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.878268] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.878269] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.878270] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.878271] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.878272] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.878273] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.878274] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.878275] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.878277] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 0.878278] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.878280] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.878281] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.878282] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.878283] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.878286] system 00:03: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.878288] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.878290] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.878381] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.878384] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.878641] pnp 00:05: [dma 2] [ 0.878673] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.878803] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.878869] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.878871] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.878914] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.878952] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.879190] pnp: PnP ACPI: found 10 devices [ 0.885296] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.885340] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.885342] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.885344] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.885345] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd07fffff 64bit pref] [ 0.885348] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.885349] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.885351] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.885354] pci 0000:00:05.0: PCI bridge to [bus 03] [ 0.885356] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.885358] pci 0000:00:06.0: PCI bridge to [bus 04] [ 0.885360] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.885363] pci 0000:00:09.0: PCI bridge to [bus 05] [ 0.885364] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] [ 0.885366] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.885368] pci 0000:00:0a.0: PCI bridge to [bus 06] [ 0.885370] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 0.885371] pci 0000:00:0a.0: bridge window [mem 0xd0900000-0xd09fffff 64bit pref] [ 0.885374] pci 0000:07:00.0: PCI bridge to [bus 08] [ 0.885376] pci 0000:07:00.0: bridge window [io 0xb000-0xbfff] [ 0.885380] pci 0000:07:00.0: bridge window [mem 0xfe400000-0xfe4fffff] [ 0.885388] pci 0000:00:0d.0: PCI bridge to [bus 07-08] [ 0.885389] pci 0000:00:0d.0: bridge window [io 0xb000-0xbfff] [ 0.885391] pci 0000:00:0d.0: bridge window [mem 0xfe400000-0xfe4fffff] [ 0.885394] pci 0000:00:14.4: PCI bridge to [bus 09] [ 0.885396] pci 0000:00:14.4: bridge window [io 0xa000-0xafff] [ 0.885399] pci 0000:00:14.4: bridge window [mem 0xfe300000-0xfe3fffff] [ 0.885405] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.885406] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.885407] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.885408] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.885409] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.885410] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.885411] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window] [ 0.885413] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.885414] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.885415] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd07fffff 64bit pref] [ 0.885416] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.885417] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.885418] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.885419] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] [ 0.885420] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.885421] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff] [ 0.885422] pci_bus 0000:06: resource 1 [mem 0xfe500000-0xfe5fffff] [ 0.885423] pci_bus 0000:06: resource 2 [mem 0xd0900000-0xd09fffff 64bit pref] [ 0.885424] pci_bus 0000:07: resource 0 [io 0xb000-0xbfff] [ 0.885425] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff] [ 0.885426] pci_bus 0000:08: resource 0 [io 0xb000-0xbfff] [ 0.885427] pci_bus 0000:08: resource 1 [mem 0xfe400000-0xfe4fffff] [ 0.885428] pci_bus 0000:09: resource 0 [io 0xa000-0xafff] [ 0.885429] pci_bus 0000:09: resource 1 [mem 0xfe300000-0xfe3fffff] [ 0.885430] pci_bus 0000:09: resource 4 [io 0x0000-0x03af window] [ 0.885431] pci_bus 0000:09: resource 5 [io 0x03e0-0x0cf7 window] [ 0.885432] pci_bus 0000:09: resource 6 [io 0x03b0-0x03df window] [ 0.885433] pci_bus 0000:09: resource 7 [io 0x0d00-0xffff window] [ 0.885434] pci_bus 0000:09: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.885435] pci_bus 0000:09: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.885436] pci_bus 0000:09: resource 10 [mem 0xc0000000-0xffffffff window] [ 0.885510] NET: Registered protocol family 2 [ 0.885841] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes) [ 0.885993] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.886760] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.887063] TCP: Hash tables configured (established 262144 bind 65536) [ 0.887136] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.887326] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.887552] NET: Registered protocol family 1 [ 0.887557] NET: Registered protocol family 44 [ 0.963154] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c6 took 73796 usecs [ 1.036482] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6c6 took 71411 usecs [ 1.109816] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6c6 took 71423 usecs [ 1.183151] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x6c6 took 71608 usecs [ 1.183352] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.183361] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 [ 1.183707] pci 0000:07:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled [ 1.183725] PCI: CLS 64 bytes, default 64 [ 1.183769] Unpacking initramfs... [ 1.373692] Freeing initrd memory: 14764K [ 1.374269] iommu: Adding device 0000:00:00.0 to group 0 [ 1.374360] iommu: Adding device 0000:00:02.0 to group 1 [ 1.374444] iommu: Adding device 0000:00:04.0 to group 2 [ 1.374534] iommu: Adding device 0000:00:05.0 to group 3 [ 1.374618] iommu: Adding device 0000:00:06.0 to group 4 [ 1.374705] iommu: Adding device 0000:00:09.0 to group 5 [ 1.374786] iommu: Adding device 0000:00:0a.0 to group 6 [ 1.374876] iommu: Adding device 0000:00:0d.0 to group 7 [ 1.374957] iommu: Adding device 0000:00:11.0 to group 8 [ 1.375056] iommu: Adding device 0000:00:12.0 to group 9 [ 1.375071] iommu: Adding device 0000:00:12.2 to group 9 [ 1.375165] iommu: Adding device 0000:00:13.0 to group 10 [ 1.375200] iommu: Adding device 0000:00:13.2 to group 10 [ 1.375289] iommu: Adding device 0000:00:14.0 to group 11 [ 1.375375] iommu: Adding device 0000:00:14.1 to group 12 [ 1.375459] iommu: Adding device 0000:00:14.2 to group 13 [ 1.375550] iommu: Adding device 0000:00:14.3 to group 14 [ 1.375630] iommu: Adding device 0000:00:14.4 to group 15 [ 1.375725] iommu: Adding device 0000:00:14.5 to group 16 [ 1.375817] iommu: Adding device 0000:00:16.0 to group 17 [ 1.375834] iommu: Adding device 0000:00:16.2 to group 17 [ 1.375955] iommu: Adding device 0000:01:00.0 to group 18 [ 1.375985] iommu: Adding device 0000:01:00.1 to group 18 [ 1.376069] iommu: Adding device 0000:02:00.0 to group 19 [ 1.376176] iommu: Adding device 0000:03:00.0 to group 20 [ 1.376319] iommu: Adding device 0000:04:00.0 to group 21 [ 1.376449] iommu: Adding device 0000:05:00.0 to group 22 [ 1.376474] iommu: Adding device 0000:05:00.1 to group 22 [ 1.376590] iommu: Adding device 0000:06:00.0 to group 23 [ 1.376678] iommu: Adding device 0000:07:00.0 to group 24 [ 1.376686] iommu: Adding device 0000:08:00.0 to group 24 [ 1.376696] iommu: Adding device 0000:09:06.0 to group 15 [ 1.376718] iommu: Adding device 0000:09:06.1 to group 15 [ 1.376734] iommu: Adding device 0000:09:06.2 to group 15 [ 1.425979] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 1.425980] AMD-Vi: Interrupt remapping enabled [ 1.426140] AMD-Vi: Lazy IO/TLB flushing enabled [ 1.427565] LVT offset 1 assigned for vector 0x400 [ 1.427573] LVT offset 1 assigned [ 1.427776] perf: AMD IBS detected (0x0000001f) [ 1.427841] Scanning for low memory corruption every 60 seconds [ 1.428459] Initialise system trusted keyrings [ 1.428470] Key type blacklist registered [ 1.428552] workingset: timestamp_bits=41 max_order=23 bucket_order=0 [ 1.429804] zbud: loaded [ 1.430041] pstore: using zstd compression [ 1.431670] Key type asymmetric registered [ 1.431671] Asymmetric key parser 'x509' registered [ 1.431678] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.431769] io scheduler noop registered [ 1.431770] io scheduler deadline registered [ 1.431797] io scheduler cfq registered (default) [ 1.431797] io scheduler mq-deadline registered [ 1.431798] io scheduler kyber registered [ 1.431821] io scheduler bfq registered [ 1.432827] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.432986] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.432997] ACPI: Power Button [PWRB] [ 1.433036] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.433048] ACPI: Power Button [PWRF] [ 1.433930] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.434553] ttyS0: detected caps 00000700 should be 00000500 [ 1.434556] 0000:08:00.0: ttyS0 at I/O 0xb040 (irq = 29, base_baud = 115200) is a 16C950/954 [ 1.434751] ttyS1: detected caps 00000700 should be 00000500 [ 1.434752] 0000:08:00.0: ttyS1 at I/O 0xb048 (irq = 29, base_baud = 115200) is a 16C950/954 [ 1.434929] ttyS2: detected caps 00000700 should be 00000500 [ 1.434930] 0000:08:00.0: ttyS2 at I/O 0xb050 (irq = 29, base_baud = 115200) is a 16C950/954 [ 1.435104] ttyS3: detected caps 00000700 should be 00000500 [ 1.435105] 0000:08:00.0: ttyS3 at I/O 0xb058 (irq = 29, base_baud = 115200) is a 16C950/954 [ 1.436727] usbcore: registered new interface driver usbserial_generic [ 1.436732] usbserial: USB Serial support registered for generic [ 1.436753] rtc_cmos 00:06: RTC can wake from S4 [ 1.436928] rtc_cmos 00:06: registered as rtc0 [ 1.436944] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.437145] ledtrig-cpu: registered to indicate activity on CPUs [ 1.437390] NET: Registered protocol family 10 [ 1.441049] Segment Routing with IPv6 [ 1.441069] NET: Registered protocol family 17 [ 1.441395] RAS: Correctable Errors collector initialized. [ 1.441513] microcode: CPU0: patch_level=0x010000bf [ 1.441538] microcode: CPU1: patch_level=0x010000bf [ 1.441565] microcode: CPU2: patch_level=0x010000bf [ 1.441592] microcode: CPU3: patch_level=0x010000bf [ 1.441619] microcode: CPU4: patch_level=0x010000bf [ 1.441623] microcode: CPU5: patch_level=0x010000bf [ 1.441711] microcode: Microcode Update Driver: v2.2. [ 1.441721] sched_clock: Marking stable (1396657306, 45049547)->(1558140421, -116433568) [ 1.441922] registered taskstats version 1 [ 1.441933] Loading compiled-in X.509 certificates [ 1.444530] Loaded X.509 cert 'Build time autogenerated kernel key: bb983e60710248b4bdd667890322f3d120346d19' [ 1.444552] zswap: loaded using pool lzo/zbud [ 1.448054] Key type big_key registered [ 1.448600] Magic number: 10:872:328 [ 1.448756] rtc_cmos 00:06: setting system clock to 2018-11-04 12:20:06 UTC (1541334006) [ 1.786479] Freeing unused decrypted memory: 2040K [ 2.028755] Freeing unused kernel image memory: 1512K [ 2.028758] Write protecting the kernel read-only data: 18432k [ 2.030455] Freeing unused kernel image memory: 2008K [ 2.030708] Freeing unused kernel image memory: 456K [ 2.031011] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.031018] Run /init as init process [ 2.107346] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.107348] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.108066] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.109283] Floppy drive(s): fd0 is 1.44M [ 2.110032] SCSI subsystem initialized [ 2.110238] QUIRK: Enable AMD PLL fix [ 2.110275] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.110284] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1 [ 2.110393] xhci_hcd 0000:03:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490 [ 2.110626] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 2.110628] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.110629] usb usb1: Product: xHCI Host Controller [ 2.110630] usb usb1: Manufacturer: Linux 4.19.0-arch1-1-custom xhci-hcd [ 2.110631] usb usb1: SerialNumber: 0000:03:00.0 [ 2.110771] hub 1-0:1.0: USB hub found [ 2.110780] hub 1-0:1.0: 2 ports detected [ 2.110895] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.110898] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2 [ 2.110901] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 2.110922] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.110942] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 2.110943] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.110953] usb usb2: Product: xHCI Host Controller [ 2.110954] usb usb2: Manufacturer: Linux 4.19.0-arch1-1-custom xhci-hcd [ 2.110955] usb usb2: SerialNumber: 0000:03:00.0 [ 2.111044] hub 2-0:1.0: USB hub found [ 2.111052] hub 2-0:1.0: 2 ports detected [ 2.111232] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.111236] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 2.111298] xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490 [ 2.111446] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 2.111447] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.111448] usb usb3: Product: xHCI Host Controller [ 2.111449] usb usb3: Manufacturer: Linux 4.19.0-arch1-1-custom xhci-hcd [ 2.111449] usb usb3: SerialNumber: 0000:04:00.0 [ 2.111559] hub 3-0:1.0: USB hub found [ 2.111566] hub 3-0:1.0: 2 ports detected [ 2.111660] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.111662] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 [ 2.111664] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 2.111678] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.111700] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 2.111701] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.111702] usb usb4: Product: xHCI Host Controller [ 2.111703] usb usb4: Manufacturer: Linux 4.19.0-arch1-1-custom xhci-hcd [ 2.111704] usb usb4: SerialNumber: 0000:04:00.0 [ 2.111810] hub 4-0:1.0: USB hub found [ 2.111817] hub 4-0:1.0: 2 ports detected [ 2.115314] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.115455] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.118113] ehci-pci: EHCI PCI platform driver [ 2.118324] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.118330] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 5 [ 2.118334] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.118341] ehci-pci 0000:00:12.2: debug port 1 [ 2.118388] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 2.122562] libata version 3.00 loaded. [ 2.126948] pata_via 0000:05:00.1: version 0.3.4 [ 2.127471] scsi host1: pata_via [ 2.127558] scsi host0: pata_atiixp [ 2.127824] scsi host3: pata_via [ 2.127861] ata3: PATA max UDMA/133 cmd 0xc140 ctl 0xc130 bmdma 0xc100 irq 34 [ 2.127862] ata4: PATA max UDMA/133 cmd 0xc120 ctl 0xc110 bmdma 0xc108 irq 34 [ 2.127870] ahci 0000:00:11.0: version 3.0 [ 2.128059] FDC 0 is a post-1991 82077 [ 2.128097] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 2.128100] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.129191] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.129246] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 2.129247] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.129248] usb usb5: Product: EHCI Host Controller [ 2.129249] usb usb5: Manufacturer: Linux 4.19.0-arch1-1-custom ehci_hcd [ 2.129250] usb usb5: SerialNumber: 0000:00:12.2 [ 2.129371] hub 5-0:1.0: USB hub found [ 2.129378] hub 5-0:1.0: 5 ports detected [ 2.129671] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.129780] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6 [ 2.129783] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.129790] ehci-pci 0000:00:13.2: debug port 1 [ 2.129820] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 2.132013] scsi host2: pata_atiixp [ 2.132061] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 2.132062] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 2.132316] scsi host4: ahci [ 2.132477] scsi host5: ahci [ 2.135458] scsi host6: ahci [ 2.139048] scsi host7: ahci [ 2.139231] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 [ 2.139233] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 [ 2.139235] ata7: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 [ 2.139237] ata8: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 [ 2.139473] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl IDE mode [ 2.139475] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 2.143170] scsi host8: ahci [ 2.145960] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.146149] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 2.146173] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.146174] usb usb6: Product: EHCI Host Controller [ 2.146175] usb usb6: Manufacturer: Linux 4.19.0-arch1-1-custom ehci_hcd [ 2.146176] usb usb6: SerialNumber: 0000:00:13.2 [ 2.146280] hub 6-0:1.0: USB hub found [ 2.146286] hub 6-0:1.0: 5 ports detected [ 2.146602] ehci-pci 0000:00:16.2: EHCI Host Controller [ 2.146607] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7 [ 2.146609] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.146616] ehci-pci 0000:00:16.2: debug port 1 [ 2.146648] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 2.146661] scsi host9: ahci [ 2.146717] ata9: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915100 irq 36 [ 2.146718] ata10: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915180 irq 36 [ 2.159252] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.159347] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 2.159348] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.159349] usb usb7: Product: EHCI Host Controller [ 2.159350] usb usb7: Manufacturer: Linux 4.19.0-arch1-1-custom ehci_hcd [ 2.159350] usb usb7: SerialNumber: 0000:00:16.2 [ 2.159449] hub 7-0:1.0: USB hub found [ 2.159455] hub 7-0:1.0: 4 ports detected [ 2.160799] ohci-pci: OHCI PCI platform driver [ 2.160938] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.160943] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8 [ 2.160976] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 2.166087] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 2.185963] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 2.219933] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 2.219934] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.219935] usb usb8: Product: OHCI PCI host controller [ 2.219936] usb usb8: Manufacturer: Linux 4.19.0-arch1-1-custom ohci_hcd [ 2.219937] usb usb8: SerialNumber: 0000:00:12.0 [ 2.220054] hub 8-0:1.0: USB hub found [ 2.220061] hub 8-0:1.0: 5 ports detected [ 2.220304] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.220309] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9 [ 2.220328] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 2.242603] firewire_ohci 0000:09:06.2: added OHCI v1.10 device as card 1, 4 IR + 8 IT contexts, quirks 0x2 [ 2.279963] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 2.279965] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.279966] usb usb9: Product: OHCI PCI host controller [ 2.279967] usb usb9: Manufacturer: Linux 4.19.0-arch1-1-custom ohci_hcd [ 2.279967] usb usb9: SerialNumber: 0000:00:13.0 [ 2.280077] hub 9-0:1.0: USB hub found [ 2.280083] hub 9-0:1.0: 5 ports detected [ 2.280333] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.280337] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10 [ 2.280358] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 2.332863] ata1.01: ATAPI: LITE-ON DVDRW LH-20A1L, BL05, max UDMA/100 [ 2.332866] ata1.01: limited to UDMA/33 due to 40-wire cable [ 2.339948] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 2.339949] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.339950] usb usb10: Product: OHCI PCI host controller [ 2.339951] usb usb10: Manufacturer: Linux 4.19.0-arch1-1-custom ohci_hcd [ 2.339952] usb usb10: SerialNumber: 0000:00:14.5 [ 2.340058] hub 10-0:1.0: USB hub found [ 2.340064] hub 10-0:1.0: 2 ports detected [ 2.340267] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 2.340271] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11 [ 2.340290] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 2.399947] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 2.399949] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.399949] usb usb11: Product: OHCI PCI host controller [ 2.399950] usb usb11: Manufacturer: Linux 4.19.0-arch1-1-custom ohci_hcd [ 2.399951] usb usb11: SerialNumber: 0000:00:16.0 [ 2.400057] hub 11-0:1.0: USB hub found [ 2.400064] hub 11-0:1.0: 4 ports detected [ 2.439263] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.444374] random: fast init done [ 2.445917] tsc: Refined TSC clocksource calibration: 3292.863 MHz [ 2.445944] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f76f665b57, max_idle_ns: 440795314221 ns [ 2.446004] clocksource: Switched to clocksource tsc [ 2.450943] scsi 0:0:1:0: CD-ROM LITE-ON DVDRW LH-20A1L BL05 PQ: 0 ANSI: 5 [ 2.452952] ata7: SATA link down (SStatus 0 SControl 300) [ 2.452983] ata6: SATA link down (SStatus 0 SControl 300) [ 2.453010] ata8: SATA link down (SStatus 0 SControl 300) [ 2.459710] ata9: SATA link down (SStatus 0 SControl 330) [ 2.459750] ata10: SATA link down (SStatus 0 SControl 330) [ 2.489248] usb 7-2: new high-speed USB device number 2 using ehci-pci [ 2.555001] sr 0:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.555006] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.555207] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 2.581806] usb 1-1: New USB device found, idVendor=0451, idProduct=8142, bcdDevice= 1.00 [ 2.581808] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 2.581809] usb 1-1: SerialNumber: B400087927A4 [ 2.582192] hub 1-1:1.0: USB hub found [ 2.582543] hub 1-1:1.0: 4 ports detected [ 2.609204] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.610714] ata5.00: ATA-8: ST31000524NS, SN12, max UDMA/133 [ 2.610715] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32) [ 2.610959] ata5.00: failed to enable Sense Data Reporting, Emask 0x1 [ 2.612953] ata5.00: failed to enable Sense Data Reporting, Emask 0x1 [ 2.612957] ata5.00: configured for UDMA/133 [ 2.613272] scsi 4:0:0:0: Direct-Access ATA ST31000524NS SN12 PQ: 0 ANSI: 5 [ 2.615846] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.615864] sd 4:0:0:0: [sda] Write Protect is off [ 2.615866] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.615893] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.633952] sda: sda1 sda2 sda3 sda4 [ 2.634572] sd 4:0:0:0: [sda] Attached SCSI disk [ 2.706039] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 2.712837] firewire_core 0000:05:00.0: created device fw0: GUID 008f1300f63b1100, S400 [ 2.726838] usb 2-1: New USB device found, idVendor=0451, idProduct=8140, bcdDevice= 1.00 [ 2.726845] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.727713] hub 2-1:1.0: USB hub found [ 2.728329] hub 2-1:1.0: 4 ports detected [ 2.734928] usb 7-2: New USB device found, idVendor=0bda, idProduct=0111, bcdDevice=11.37 [ 2.734935] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.734940] usb 7-2: Product: USB 2.0 Reader [ 2.734944] usb 7-2: Manufacturer: Generic [ 2.734948] usb 7-2: SerialNumber: 070302014067000001 [ 2.739208] usb 8-1: new full-speed USB device number 2 using ohci-pci [ 2.740060] usb-storage 7-2:1.0: USB Mass Storage device detected [ 2.740248] scsi host10: usb-storage 7-2:1.0 [ 2.740327] usbcore: registered new interface driver usb-storage [ 2.741825] usbcore: registered new interface driver uas [ 2.765841] usb 9-1: new full-speed USB device number 2 using ohci-pci [ 2.766062] firewire_core 0000:09:06.2: created device fw1: GUID 00023c0021012ada, S400 [ 2.862579] usb 1-1.4: new high-speed USB device number 3 using xhci_hcd [ 2.868527] random: lvm: uninitialized urandom read (4 bytes read) [ 2.931029] usb 8-1: New USB device found, idVendor=051d, idProduct=0002, bcdDevice= 0.90 [ 2.931037] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.931041] usb 8-1: Product: Back-UPS NS 900M FW:932.a4 .D USB FW:a4 [ 2.931045] usb 8-1: Manufacturer: American Power Conversion [ 2.931049] usb 8-1: SerialNumber: 4B1647P27935 [ 2.936540] hidraw: raw HID events driver (C) Jiri Kosina [ 2.944979] usbcore: registered new interface driver usbhid [ 2.944979] usbhid: USB HID core driver [ 2.947917] hid-generic 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS NS 900M FW:932.a4 .D USB FW:a4 ] on usb-0000:00:12.0-1/input0 [ 2.955203] usb 1-1.4: New USB device found, idVendor=0451, idProduct=8142, bcdDevice= 1.00 [ 2.955210] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 2.955214] usb 1-1.4: SerialNumber: D400085927A4 [ 2.955569] hub 1-1.4:1.0: USB hub found [ 2.955912] hub 1-1.4:1.0: 4 ports detected [ 2.970653] usb 9-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=48.39 [ 2.970660] usb 9-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.991435] device-mapper: uevent: version 1.0.3 [ 2.991519] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 2.992576] random: lvm: uninitialized urandom read (2 bytes read) [ 3.026074] usb 2-1.4: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd [ 3.046842] usb 2-1.4: New USB device found, idVendor=0451, idProduct=8140, bcdDevice= 1.00 [ 3.046849] usb 2-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.047607] hub 2-1.4:1.0: USB hub found [ 3.048332] hub 2-1.4:1.0: 4 ports detected [ 3.369255] usb 6-3: new high-speed USB device number 3 using ehci-pci [ 3.516203] usb 6-3: New USB device found, idVendor=0424, idProduct=2504, bcdDevice= 0.01 [ 3.516205] usb 6-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.516516] hub 6-3:1.0: USB hub found [ 3.516575] hub 6-3:1.0: 4 ports detected [ 3.582588] usb 8-2: new full-speed USB device number 3 using ohci-pci [ 3.773053] usb 8-2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.03 [ 3.773059] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.773064] usb 8-2: Product: USB Receiver [ 3.773067] usb 8-2: Manufacturer: Logitech [ 3.783191] scsi 10:0:0:0: Direct-Access Generic 2.0 Reader -0 1.00 PQ: 0 ANSI: 0 CCS [ 3.792903] logitech-djreceiver 0003:046D:C52B.0004: hiddev1,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-2/input2 [ 3.813571] scsi 10:0:0:1: Direct-Access Generic 2.0 Reader -1 1.00 PQ: 0 ANSI: 0 CCS [ 3.825438] sd 10:0:0:0: [sdb] Attached SCSI removable disk [ 3.833944] sd 10:0:0:1: [sdc] Attached SCSI removable disk [ 3.909696] input: Logitech Unifying Device. Wireless PID:406f Keyboard as /devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.2/0003:046D:C52B.0004/0003:046D:406F.0005/input/input3 [ 3.909722] input: Logitech Unifying Device. Wireless PID:406f Mouse as /devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.2/0003:046D:C52B.0004/0003:046D:406F.0005/input/input4 [ 3.909751] input: Logitech Unifying Device. Wireless PID:406f Consumer Control as /devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.2/0003:046D:C52B.0004/0003:046D:406F.0005/input/input5 [ 3.909770] input: Logitech Unifying Device. Wireless PID:406f System Control as /devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.2/0003:046D:C52B.0004/0003:046D:406F.0005/input/input6 [ 3.909857] hid-generic 0003:046D:406F.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:406f] on usb-0000:00:12.0-2:1 [ 4.027251] input: Logitech MX Ergo as /devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.2/0003:046D:C52B.0004/0003:046D:406F.0005/input/input10 [ 4.027351] logitech-hidpp-device 0003:046D:406F.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech MX Ergo] on usb-0000:00:12.0-2:1 [ 4.138180] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 5.119914] random: crng init done [ 6.125962] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 6.142659] systemd[1]: Detected architecture x86-64. [ 6.183944] systemd[1]: Set hostname to . [ 7.893593] systemd[1]: Listening on LVM2 poll daemon socket. [ 7.897664] systemd[1]: Listening on Process Core Dump Socket. [ 7.898110] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.898476] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.898830] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 7.899140] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.900735] systemd[1]: Created slice User and Session Slice. [ 8.380156] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 8.381906] vfs_monitor: loading out-of-tree module taints kernel. [ 8.381945] vfs_monitor: module verification failed: signature and/or required key missing - tainting kernel [ 8.382438] mp: /, major: 254, minor: 0 [ 8.382439] partition count: 1, comm[347]: systemd-modules, path: /usr/lib/systemd/systemd-modules-load, cmdline: /usr/lib/systemd/systemd-modules-load [ 8.382484] audit: type=1130 audit(1541334013.427:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 8.449752] register_kretprobes 10 ok [ 8.504048] audit: type=1130 audit(1541334013.550:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 8.505200] audit: type=1130 audit(1541334013.550:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-binfmt comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 8.506751] audit: type=1130 audit(1541334013.553:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 8.552013] systemd-journald[344]: Received request to flush runtime journal from PID 1 [ 8.896066] sr 0:0:1:0: Attached scsi generic sg0 type 5 [ 8.896115] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 8.896150] sd 10:0:0:0: Attached scsi generic sg2 type 0 [ 8.896183] sd 10:0:0:1: Attached scsi generic sg3 type 0 [ 8.907203] audit: type=1130 audit(1541334013.953:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rpcbind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.024773] usbcore: registered new device driver usbip-host [ 9.026219] audit: type=1130 audit(1541334014.073:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.140359] audit: type=1130 audit(1541334014.187:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 10.109632] audit: type=1130 audit(1541334015.157:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 10.401214] audit: type=1130 audit(1541334015.447:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 11.477229] audit: type=1130 audit(1541334016.523:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 13.218117] Linux agpgart interface v0.103 [ 13.273750] tg3.c:v3.137 (May 11, 2014) [ 13.281487] acpi_cpufreq: overriding BIOS provided _PSD data [ 13.283409] tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address bc:5f:f4:1a:96:ca [ 13.283411] tg3 0000:06:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 13.283412] tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 13.283413] tg3 0000:06:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 13.310010] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 13.310017] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 13.310217] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 13.352907] input: PC Speaker as /devices/platform/pcspkr/input/input11 [ 13.464495] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 13.464951] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 13.465356] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 13.604462] kauditd_printk_skb: 2 callbacks suppressed [ 13.604467] audit: type=1130 audit(1541334018.650:14): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-networkd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 13.613594] PCI parallel port detected: 1415:9513, I/O at 0xb070(0x0), IRQ 29 [ 13.613665] parport0: PC-style at 0xb070, irq 29 [PCSPP] [ 13.644175] gameport gameport0: EMU10K1 is pci0000:09:06.1/gameport0, io 0xa020, speed 793kHz [ 13.892336] Bluetooth: Core ver 2.22 [ 13.892363] NET: Registered protocol family 31 [ 13.892364] Bluetooth: HCI device and connection manager initialized [ 13.892369] Bluetooth: HCI socket layer initialized [ 13.892371] Bluetooth: L2CAP socket layer initialized [ 13.892378] Bluetooth: SCO socket layer initialized [ 14.075811] audit: type=1130 audit(1541334019.120:15): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 14.080789] mousedev: PS/2 mouse device common for all mice [ 14.195050] usbcore: registered new interface driver btusb [ 14.203969] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 14.203971] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 14.206262] [drm] radeon kernel modesetting enabled. [ 14.207014] radeon 0000:01:00.0: CIK support disabled by module param [ 14.283187] ppdev: user-space parallel port driver [ 14.303762] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input12 [ 14.303824] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input13 [ 14.303882] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input14 [ 14.303932] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input15 [ 14.303978] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input16 [ 14.304024] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input17 [ 14.307949] snd_emu10k1 0000:09:06.0: non-passthrough IOMMU detected, widening DMA allocations [ 14.336865] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.338260] kvm: Nested Virtualization enabled [ 14.338263] kvm: Nested Paging enabled [ 14.358554] MCE: In-kernel MCE decoding enabled. [ 14.411885] EDAC amd64: Node 0: DRAM ECC disabled. [ 14.411887] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 14.415292] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 14.415295] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 14.415296] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 14.415297] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 14.415298] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 [ 14.415299] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 14.415300] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 14.415302] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 14.415303] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 14.473526] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input18 [ 14.473888] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input19 [ 14.474053] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input20 [ 14.474238] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input21 [ 14.474406] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input22 [ 14.474563] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input23 [ 14.474727] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input24 [ 14.474858] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input25 [ 14.477053] EDAC amd64: Node 0: DRAM ECC disabled. [ 14.477058] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 14.525133] EDAC amd64: Node 0: DRAM ECC disabled. [ 14.525135] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 15.049112] [drm] amdgpu kernel modesetting enabled. [ 15.173727] AMD IOMMUv2 driver by Joerg Roedel [ 15.173731] AMD IOMMUv2 functionality not available on this system [ 15.277341] audit: type=1130 audit(1541334020.327:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 15.287788] Adding 8388604k swap on /dev/mapper/BrimstoneARCH-SWAP1. Priority:-2 extents:1 across:8388604k FS [ 15.391105] CRAT table not found [ 15.391113] Virtual CRAT table created for CPU [ 15.391116] Parsing CRAT table with 1 nodes [ 15.391120] Creating topology SYSFS entries [ 15.391165] Topology: Add CPU node [ 15.391167] Finished initializing topology [ 15.391347] kfd kfd: Initialized module [ 15.393023] [drm] initializing kernel modesetting (HAWAII 0x1002:0x67B1 0x1682:0x9295 0x00). [ 15.393055] [drm] register mmio base: 0xFEA00000 [ 15.393057] [drm] register mmio size: 262144 [ 15.393086] [drm] add ip block number 0 [ 15.393089] [drm] add ip block number 1 [ 15.393091] [drm] add ip block number 2 [ 15.393094] [drm] add ip block number 3 [ 15.393099] [drm] add ip block number 4 [ 15.393101] [drm] add ip block number 5 [ 15.393103] [drm] add ip block number 6 [ 15.393106] [drm] add ip block number 7 [ 15.393108] [drm] add ip block number 8 [ 15.393244] amdgpu 0000:01:00.0: No more image in the PCI ROM [ 15.393334] ATOM BIOS: 113-HAWAII_PRO_D5_4GB_C671_W8 [ 15.393465] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 15.526359] amdgpu 0000:01:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used) [ 15.526368] amdgpu 0000:01:00.0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF [ 15.526393] [drm] Detected VRAM RAM=4096M, BAR=256M [ 15.526396] [drm] RAM width 512bits GDDR5 [ 15.526603] [TTM] Zone kernel: Available graphics memory: 12326600 kiB [ 15.526606] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 15.526608] [TTM] Initializing pool allocator [ 15.526619] [TTM] Initializing DMA pool allocator [ 15.526708] [drm] amdgpu: 4096M of VRAM memory ready [ 15.526712] [drm] amdgpu: 4096M of GTT memory ready. [ 15.526751] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 15.527305] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000). [ 15.663099] [drm] Found UVD firmware Version: 1.64 Family ID: 9 [ 15.670711] [drm] Found VCE firmware Version: 50.10 Binary ID: 2 [ 15.671265] [drm] PCIE gen 2 link speeds already enabled [ 15.726490] amdgpu: [powerplay] Failed to retrieve minimum clocks. [ 15.726492] amdgpu: [powerplay] Error in phm_get_clock_info [ 15.726645] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4! [ 15.726657] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4! [ 15.726670] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4! [ 15.726980] [drm] Display Core initialized with v3.1.59! [ 15.785920] [drm] SADs count is: -2, don't need to read it [ 15.803271] [drm] SADs count is: -2, don't need to read it [ 15.803284] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 15.803284] [drm] Driver supports precise vblank timestamp query. [ 15.841136] [drm] UVD initialized successfully. [ 15.916301] audit: type=1130 audit(1541334020.963:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 15.933861] partition /tmp [0, 44] added, comm[452]: mount [ 15.962195] [drm] VCE initialized successfully. [ 15.964880] kfd kfd: Allocated 3969056 bytes on gart [ 15.964909] Virtual CRAT table created for GPU [ 15.964910] Parsing CRAT table with 1 nodes [ 15.964922] Creating topology SYSFS entries [ 15.965035] Topology: Add dGPU node [0x67b1:0x1002] [ 15.965107] kfd kfd: added device 1002:67b1 [ 15.968271] [drm] fb mappable at 0xC0CE7000 [ 15.968275] [drm] vram apper at 0xC0000000 [ 15.968277] [drm] size 9216000 [ 15.968279] [drm] fb depth is 24 [ 15.968281] [drm] pitch is 7680 [ 15.968415] fbcon: amdgpudrmfb (fb0) is primary device [ 16.170754] Console: switching to colour frame buffer device 180x56 [ 16.193225] amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device [ 16.206428] audit: type=1130 audit(1541334021.253:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2dlabel-HOME comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 16.216222] [drm] Initialized amdgpu 3.27.0 20150101 for 0000:01:00.0 on minor 0 [ 16.279281] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 16.279321] partition /home [254, 2] added, comm[460]: mount [ 16.350555] audit: type=1130 audit(1541334021.397:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2dlabel-BOOT comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 16.375435] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem [ 16.437009] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 16.437078] partition /boot [8, 3] added, comm[465]: mount [ 16.560522] audit: type=1130 audit(1541334021.607:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-catalog-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 16.807057] microcode: CPU1: new patch_level=0x010000dc [ 16.807077] microcode: CPU5: new patch_level=0x010000dc [ 16.807098] microcode: CPU3: new patch_level=0x010000dc [ 16.807118] microcode: CPU2: new patch_level=0x010000dc [ 16.807137] microcode: CPU0: new patch_level=0x010000dc [ 16.807157] microcode: CPU4: new patch_level=0x010000dc [ 16.826934] audit: type=1130 audit(1541334021.873:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 16.866921] audit: type=1127 audit(1541334021.913:22): pid=474 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success' [ 17.042413] RPC: Registered named UNIX socket transport module. [ 17.042415] RPC: Registered udp transport module. [ 17.042416] RPC: Registered tcp transport module. [ 17.042416] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 17.043222] partition /var/lib/nfs/rpc_pipefs [0, 46] added, comm[475]: mount [ 17.073543] audit: type=1130 audit(1541334022.120:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 17.849146] tg3 0000:06:00.0 eth0: Link is up at 1000 Mbps, full duplex [ 17.849180] tg3 0000:06:00.0 eth0: Flow control is on for TX and on for RX [ 17.849185] tg3 0000:06:00.0 eth0: EEE is enabled [ 17.849229] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.681133] kauditd_printk_skb: 3 callbacks suppressed [ 19.681138] audit: type=1130 audit(1541334024.727:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 19.720234] audit: type=1130 audit(1541334024.767:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-done comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 19.812098] audit: type=1130 audit(1541334024.857:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sshd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 19.981936] audit: type=1130 audit(1541334025.027:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 19.985111] audit: type=1130 audit(1541334025.030:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=apcupsd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 19.987764] audit: type=1130 audit(1541334025.033:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=alsa-restore comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 20.346548] w83627ehf: Found NCT6775F chip at 0x290 [ 20.347218] w83627ehf w83627ehf.656: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 21.070588] audit: type=1130 audit(1541334026.117:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 21.072631] audit: type=1131 audit(1541334026.120:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 21.076899] audit: type=1130 audit(1541334026.123:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=gssproxy comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 21.081153] audit: type=1130 audit(1541334026.127:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ntpd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 21.176793] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.176794] Bluetooth: BNEP filters: protocol multicast [ 21.176798] Bluetooth: BNEP socket layer initialized [ 21.818739] FS-Cache: Loaded [ 21.867264] FS-Cache: Netfs 'nfs' registered for caching [ 21.884061] Key type dns_resolver registered [ 21.926209] NFS: Registering the id_resolver key type [ 21.926216] Key type id_resolver registered [ 21.926217] Key type id_legacy registered [ 22.169562] partition /home/arf/STUFF [0, 48] added, comm[526]: mount.nfs [ 31.224633] kauditd_printk_skb: 8 callbacks suppressed [ 31.224635] audit: type=1006 audit(1541334036.271:45): pid=555 uid=0 old-auid=4294967295 auid=666 tty=tty1 old-ses=4294967295 ses=1 res=1 [ 31.280526] audit: type=1130 audit(1541334036.328:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@666 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 31.310311] audit: type=1006 audit(1541334036.358:47): pid=558 uid=0 old-auid=4294967295 auid=666 tty=(none) old-ses=4294967295 ses=2 res=1 [ 31.709789] audit: type=1130 audit(1541334036.758:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@666 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 48.174396] logitech-hidpp-device 0003:046D:406F.0005: HID++ 4.5 device connected. [ 51.550635] audit: type=1131 audit(1541334056.607:49): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 55.302491] audit: type=1130 audit(1541334060.362:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 57.699077] fuse init (API version 7.27) [ 60.798399] audit: type=1130 audit(1541334065.862:51): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 62.609693] Bluetooth: RFCOMM TTY layer initialized [ 62.609703] Bluetooth: RFCOMM socket layer initialized [ 62.609712] Bluetooth: RFCOMM ver 1.11 [ 106.955814] audit: type=1130 audit(1541334112.040:52): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 923.904061] audit: type=1130 audit(1541334929.013:53): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 923.904068] audit: type=1131 audit(1541334929.013:54): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 2473.927787] usb 6-3: USB disconnect, device number 3 [ 2475.864460] usb 6-3: new high-speed USB device number 4 using ehci-pci [ 2476.011473] usb 6-3: New USB device found, idVendor=0424, idProduct=2504, bcdDevice= 0.01 [ 2476.011481] usb 6-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2476.011933] hub 6-3:1.0: USB hub found [ 2476.012086] hub 6-3:1.0: 4 ports detected [ 2749.693808] [drm] SADs count is: -2, don't need to read it [ 2767.694985] [drm] SADs count is: -2, don't need to read it [40345.876062] audit: type=1130 audit(1541374349.940:55): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [40346.609470] audit: type=1130 audit(1541374350.673:56): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [40402.485425] audit: type=1131 audit(1541374406.548:57): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [47379.663734] PM: suspend entry (deep) [47379.663737] PM: Syncing filesystems ... done. [47380.110757] Freezing user space processes ... (elapsed 0.003 seconds) done. [47380.113968] OOM killer disabled. [47380.113969] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [47380.115658] Suspending console(s) (use no_console_suspend to debug) [47380.136521] sd 4:0:0:0: [sda] Synchronizing SCSI cache [47380.242270] sd 4:0:0:0: [sda] Stopping disk [47380.633727] amdgpu: [powerplay] failed to send message 281 ret is 254 [47380.633895] amdgpu: [powerplay] VI should always have 2 performance levels [47380.894669] ACPI: Preparing to enter system sleep state S3 [47380.894963] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [47381.310343] PM: Saving platform NVS memory [47381.310454] Disabling non-boot CPUs ... [47381.361931] smpboot: CPU 1 is now offline [47381.428101] smpboot: CPU 2 is now offline [47381.468063] smpboot: CPU 3 is now offline [47381.521750] smpboot: CPU 4 is now offline [47381.565004] smpboot: CPU 5 is now offline [47381.570071] ACPI: Low-level resume complete [47381.570106] PM: Restoring platform NVS memory [47381.667787] LVT offset 1 assigned for vector 0x400 [47381.667801] LVT offset 1 assigned [47381.668038] microcode: CPU0: new patch_level=0x010000dc [47381.668060] Enabling non-boot CPUs ... [47381.668102] x86: Booting SMP configuration: [47381.668102] smpboot: Booting Node 0 Processor 1 APIC 0x1 [47381.670915] cache: parent cpu1 should not be sleeping [47381.671007] microcode: CPU1: patch_level=0x010000bf [47381.671009] microcode: CPU1: new patch_level=0x010000dc [47381.671167] CPU1 is up [47381.671191] smpboot: Booting Node 0 Processor 2 APIC 0x2 [47381.674018] cache: parent cpu2 should not be sleeping [47381.674111] microcode: CPU2: patch_level=0x010000bf [47381.674114] microcode: CPU2: new patch_level=0x010000dc [47381.674285] CPU2 is up [47381.674313] smpboot: Booting Node 0 Processor 3 APIC 0x3 [47381.677160] cache: parent cpu3 should not be sleeping [47381.677267] microcode: CPU3: patch_level=0x010000bf [47381.677270] microcode: CPU3: new patch_level=0x010000dc [47381.677478] CPU3 is up [47381.677509] smpboot: Booting Node 0 Processor 4 APIC 0x4 [47381.681123] cache: parent cpu4 should not be sleeping [47381.681221] microcode: CPU4: patch_level=0x010000bf [47381.681224] microcode: CPU4: new patch_level=0x010000dc [47381.681434] CPU4 is up [47381.681503] smpboot: Booting Node 0 Processor 5 APIC 0x5 [47381.685115] cache: parent cpu5 should not be sleeping [47381.685217] microcode: CPU5: patch_level=0x010000bf [47381.685219] microcode: CPU5: new patch_level=0x010000dc [47381.685438] CPU5 is up [47381.692778] ACPI: Waking up from system sleep state S3 [47381.728100] usb usb3: root hub lost power or was reset [47381.728106] usb usb1: root hub lost power or was reset [47381.728107] usb usb4: root hub lost power or was reset [47381.728124] usb usb2: root hub lost power or was reset [47381.730160] tg3 0000:06:00.0 eth0: Link is down [47381.738986] sd 4:0:0:0: [sda] Starting disk [47381.752999] [drm] PCIE gen 2 link speeds already enabled [47381.754180] [drm] PCIE GART of 1024M enabled (table at 0x000000F400000000). [47381.850627] [drm] SADs count is: -2, don't need to read it [47381.867754] [drm] SADs count is: -2, don't need to read it [47381.930417] ata1.01: ACPI cmd ef/03:08:00:00:00:b0 (SET FEATURES) filtered out [47381.930426] ata1.01: ACPI cmd ef/03:20:00:00:00:b0 (SET FEATURES) filtered out [47381.930432] ata1.01: ACPI cmd f5/00:00:00:00:00:b0 (SECURITY FREEZE LOCK) filtered out [47382.043460] ata8: SATA link down (SStatus 0 SControl 300) [47382.043492] ata6: SATA link down (SStatus 0 SControl 300) [47382.046781] ata7: SATA link down (SStatus 0 SControl 300) [47382.046826] ata10: SATA link down (SStatus 0 SControl 330) [47382.046946] ata9: SATA link down (SStatus 0 SControl 330) [47382.066892] usb 2-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [47382.206865] usb 1-1: reset high-speed USB device number 2 using xhci_hcd [47382.300097] firewire_core 0000:09:06.2: rediscovered device fw1 [47382.407395] [drm] UVD initialized successfully. [47382.420197] usb 2-1.4: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd [47382.460097] firewire_core 0000:05:00.0: rediscovered device fw0 [47382.528414] [drm] VCE initialized successfully. [47382.636936] usb 1-1.4: reset high-speed USB device number 3 using xhci_hcd [47384.696899] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [47384.698732] ata5.00: failed to enable Sense Data Reporting, Emask 0x1 [47384.700757] ata5.00: failed to enable Sense Data Reporting, Emask 0x1 [47384.700771] ata5.00: configured for UDMA/133 [47384.833554] floppy driver state [47384.833555] ------------------- [47384.833573] now=4309092224 last interrupt=4294877786 diff=14214438 last called handler=reset_interrupt [floppy] [47384.833575] timeout_message=lock fdc [47384.833576] last output bytes: [47384.833579] 8 80 4294877779 [47384.833582] 8 80 4294877779 [47384.833584] 8 80 4294877779 [47384.833586] 8 80 4294877784 [47384.833587] 8 80 4294877784 [47384.833589] 8 80 4294877784 [47384.833591] 8 80 4294877784 [47384.833593] e 80 4294877784 [47384.833595] 13 80 4294877784 [47384.833597] 0 90 4294877784 [47384.833599] 1a 90 4294877784 [47384.833601] 0 90 4294877784 [47384.833603] 12 90 4294877784 [47384.833605] 0 90 4294877784 [47384.833607] 14 90 4294877784 [47384.833609] 18 80 4294877784 [47384.833611] 8 80 4294877786 [47384.833613] 8 80 4294877786 [47384.833614] 8 80 4294877786 [47384.833616] 8 80 4294877786 [47384.833618] last result at 4294877787 [47384.833620] last redo_fd_request at 4294877787 [47384.833637] status=7f [47384.833638] fdc_busy=1 [47384.833639] do_floppy=reset_interrupt [floppy] [47384.833640] cont=00000000408e78f8 [47384.833641] current_req= (null) [47384.833641] command_status=-1 [47384.833644] floppy0: floppy timeout called [47384.834508] OOM killer enabled. [47384.834509] Restarting tasks ... done. [47384.841325] PM: suspend exit [47384.856448] audit: type=1130 audit(1541459725.183:58): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=shadow comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [47384.857746] audit: type=1130 audit(1541459725.186:59): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [47384.858678] audit: type=1131 audit(1541459725.186:60): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [47385.095149] audit: type=1130 audit(1541459725.423:61): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [47385.532540] tg3 0000:06:00.0 eth0: Link is up at 1000 Mbps, full duplex [47385.532544] tg3 0000:06:00.0 eth0: Flow control is on for TX and on for RX [47385.532546] tg3 0000:06:00.0 eth0: EEE is enabled [47385.533620] audit: type=1131 audit(1541459725.863:62): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=shadow comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed' [47385.535079] audit: type=1130 audit(1541459725.863:63): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=logrotate comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [47385.535093] audit: type=1131 audit(1541459725.863:64): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=logrotate comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [47391.381200] audit: type=1130 audit(1541459731.709:65): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=man-db comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [47391.381232] audit: type=1131 audit(1541459731.709:66): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=man-db comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [47415.569238] audit: type=1131 audit(1541459755.895:67): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [47552.713397] PM: suspend entry (deep) [47552.713400] PM: Syncing filesystems ... done. [47553.095353] Freezing user space processes ... (elapsed 0.002 seconds) done. [47553.098047] OOM killer disabled. [47553.098047] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [47553.099639] Suspending console(s) (use no_console_suspend to debug) [47553.141505] sd 4:0:0:0: [sda] Synchronizing SCSI cache [47553.247113] sd 4:0:0:0: [sda] Stopping disk [47553.309999] amdgpu: [powerplay] failed to send message 281 ret is 254 [47553.310165] amdgpu: [powerplay] VI should always have 2 performance levels [47553.718828] ACPI: Preparing to enter system sleep state S3 [47554.131946] PM: Saving platform NVS memory [47554.132062] Disabling non-boot CPUs ... [47554.173481] smpboot: CPU 1 is now offline [47554.213377] smpboot: CPU 2 is now offline [47554.243377] smpboot: CPU 3 is now offline [47554.292701] smpboot: CPU 4 is now offline [47554.343152] smpboot: CPU 5 is now offline [47554.345438] ACPI: Low-level resume complete [47554.345472] PM: Restoring platform NVS memory [47554.443157] LVT offset 1 assigned for vector 0x400 [47554.443171] LVT offset 1 assigned [47554.443407] microcode: CPU0: new patch_level=0x010000dc [47554.443432] Enabling non-boot CPUs ... [47554.443472] x86: Booting SMP configuration: [47554.443472] smpboot: Booting Node 0 Processor 1 APIC 0x1 [47554.446320] cache: parent cpu1 should not be sleeping [47554.446408] microcode: CPU1: patch_level=0x010000bf [47554.446410] microcode: CPU1: new patch_level=0x010000dc [47554.446567] CPU1 is up [47554.446593] smpboot: Booting Node 0 Processor 2 APIC 0x2 [47554.449465] cache: parent cpu2 should not be sleeping [47554.449567] microcode: CPU2: patch_level=0x010000bf [47554.449569] microcode: CPU2: new patch_level=0x010000dc [47554.449740] CPU2 is up [47554.449766] smpboot: Booting Node 0 Processor 3 APIC 0x3 [47554.452669] cache: parent cpu3 should not be sleeping [47554.452768] microcode: CPU3: patch_level=0x010000bf [47554.452771] microcode: CPU3: new patch_level=0x010000dc [47554.452978] CPU3 is up [47554.453003] smpboot: Booting Node 0 Processor 4 APIC 0x4 [47554.456676] cache: parent cpu4 should not be sleeping [47554.456792] microcode: CPU4: patch_level=0x010000bf [47554.456795] microcode: CPU4: new patch_level=0x010000dc [47554.457029] CPU4 is up [47554.457102] smpboot: Booting Node 0 Processor 5 APIC 0x5 [47554.460760] cache: parent cpu5 should not be sleeping [47554.460874] microcode: CPU5: patch_level=0x010000bf [47554.460876] microcode: CPU5: new patch_level=0x010000dc [47554.461105] CPU5 is up [47554.467680] ACPI: Waking up from system sleep state S3 [47554.502306] usb usb1: root hub lost power or was reset [47554.502308] usb usb2: root hub lost power or was reset [47554.502314] usb usb3: root hub lost power or was reset [47554.502315] usb usb4: root hub lost power or was reset [47554.504706] tg3 0000:06:00.0 eth0: Link is down [47554.508805] sd 4:0:0:0: [sda] Starting disk [47554.526385] [drm] PCIE gen 2 link speeds already enabled [47554.527477] [drm] PCIE GART of 1024M enabled (table at 0x000000F400000000). [47554.600195] [drm] SADs count is: -2, don't need to read it [47554.620075] [drm] SADs count is: -2, don't need to read it [47554.701123] ata1.01: ACPI cmd ef/03:08:00:00:00:b0 (SET FEATURES) filtered out [47554.701125] ata1.01: ACPI cmd ef/03:20:00:00:00:b0 (SET FEATURES) filtered out [47554.701127] ata1.01: ACPI cmd f5/00:00:00:00:00:b0 (SECURITY FREEZE LOCK) filtered out [47554.817565] ata10: SATA link down (SStatus 0 SControl 330) [47554.817619] ata7: SATA link down (SStatus 0 SControl 300) [47554.817639] ata9: SATA link down (SStatus 0 SControl 330) [47554.817945] ata6: SATA link down (SStatus 0 SControl 300) [47554.817984] ata8: SATA link down (SStatus 0 SControl 300) [47554.840957] usb 2-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [47554.980928] usb 1-1: reset high-speed USB device number 2 using xhci_hcd [47555.070874] firewire_core 0000:09:06.2: rediscovered device fw1 [47555.070885] firewire_core 0000:05:00.0: rediscovered device fw0 [47555.159733] [drm] UVD initialized successfully. [47555.194265] usb 2-1.4: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd [47555.280751] [drm] VCE initialized successfully. [47555.411099] usb 1-1.4: reset high-speed USB device number 3 using xhci_hcd [47556.730972] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [47556.732808] ata5.00: failed to enable Sense Data Reporting, Emask 0x1 [47556.734829] ata5.00: failed to enable Sense Data Reporting, Emask 0x1 [47556.734842] ata5.00: configured for UDMA/133 [47557.524337] floppy driver state [47557.524338] ------------------- [47557.524356] now=4309144000 last interrupt=4294877786 diff=14266214 last called handler=reset_interrupt [floppy] [47557.524358] timeout_message=lock fdc [47557.524359] last output bytes: [47557.524362] 8 80 4294877779 [47557.524364] 8 80 4294877779 [47557.524366] 8 80 4294877779 [47557.524368] 8 80 4294877784 [47557.524370] 8 80 4294877784 [47557.524372] 8 80 4294877784 [47557.524374] 8 80 4294877784 [47557.524376] e 80 4294877784 [47557.524378] 13 80 4294877784 [47557.524380] 0 90 4294877784 [47557.524382] 1a 90 4294877784 [47557.524384] 0 90 4294877784 [47557.524386] 12 90 4294877784 [47557.524387] 0 90 4294877784 [47557.524389] 14 90 4294877784 [47557.524391] 18 80 4294877784 [47557.524393] 8 80 4294877786 [47557.524395] 8 80 4294877786 [47557.524397] 8 80 4294877786 [47557.524406] 8 80 4294877786 [47557.524407] last result at 4294877787 [47557.524407] last redo_fd_request at 4309092224 [47557.524414] status=7f [47557.524415] fdc_busy=1 [47557.524416] do_floppy=reset_interrupt [floppy] [47557.524417] cont=00000000408e78f8 [47557.524418] current_req= (null) [47557.524418] command_status=-1 [47557.524421] floppy0: floppy timeout called [47557.525256] OOM killer enabled. [47557.525257] Restarting tasks ... done. [47557.530935] PM: suspend exit [47557.547026] audit: type=1130 audit(1541459904.099:68): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [47557.547034] audit: type=1131 audit(1541459904.099:69): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [47557.783332] audit: type=1130 audit(1541459904.336:70): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [47558.053286] tg3 0000:06:00.0 eth0: Link is up at 1000 Mbps, full duplex [47558.053289] tg3 0000:06:00.0 eth0: Flow control is on for TX and on for RX [47558.053291] tg3 0000:06:00.0 eth0: EEE is enabled [47588.103165] audit: type=1131 audit(1541459934.655:71): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'