[ 0.000000] microcode: microcode updated early to revision 0x24, date = 2018-04-02 [ 0.000000] Linux version 4.19.1-arch1-1-ARCH (builduser@heftig-16768) (gcc version 8.2.1 20180831 (GCC)) #1 SMP PREEMPT Sun Nov 4 16:49:26 UTC 2018 [ 0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img cryptdevice=PARTUUID=cf9d14dd-de5b-4e4e-9874-8badc535c98e:sys root=/dev/mapper/sys rw net.ifnames=0 i915.fastboot=1 drm.debug=0x1e log_buf_len=4M emergency [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000094d5ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000094d60000-0x0000000095d5ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000095d60000-0x000000009a36efff] usable [ 0.000000] BIOS-e820: [mem 0x000000009a36f000-0x000000009aebefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x93ed0018-0x93ee0057] usable ==> usable [ 0.000000] e820: update [mem 0x93ed0018-0x93ee0057] usable ==> usable [ 0.000000] e820: update [mem 0x93ec3018-0x93ecf057] usable ==> usable [ 0.000000] e820: update [mem 0x93ec3018-0x93ecf057] usable ==> usable [ 0.000000] e820: update [mem 0x95d61018-0x95d68c57] usable ==> usable [ 0.000000] e820: update [mem 0x95d61018-0x95d68c57] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000087fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000093ec3017] usable [ 0.000000] reserve setup_data: [mem 0x0000000093ec3018-0x0000000093ecf057] usable [ 0.000000] reserve setup_data: [mem 0x0000000093ecf058-0x0000000093ed0017] usable [ 0.000000] reserve setup_data: [mem 0x0000000093ed0018-0x0000000093ee0057] usable [ 0.000000] reserve setup_data: [mem 0x0000000093ee0058-0x0000000094d5ffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000094d60000-0x0000000095d5ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000095d60000-0x0000000095d61017] usable [ 0.000000] reserve setup_data: [mem 0x0000000095d61018-0x0000000095d68c57] usable [ 0.000000] reserve setup_data: [mem 0x0000000095d68c58-0x000000009a36efff] usable [ 0.000000] reserve setup_data: [mem 0x000000009a36f000-0x000000009aebefff] reserved [ 0.000000] reserve setup_data: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000009afbf000-0x000000009affefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000009afff000-0x000000009affffff] usable [ 0.000000] reserve setup_data: [mem 0x000000009b000000-0x000000009f9fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe101000-0x00000000fe112fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000025f5fffff] usable [ 0.000000] efi: EFI v2.31 by INSYDE Corp. [ 0.000000] efi: ACPI=0x9affe000 ACPI 2.0=0x9affe014 SMBIOS=0x9aebef98 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. Inspiron 5547/06X5CY, BIOS A10 08/25/2016 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2594.008 MHz processor [ 0.000128] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000131] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000142] last_pfn = 0x25f600 max_arch_pfn = 0x400000000 [ 0.000147] MTRR default type: uncachable [ 0.000148] MTRR fixed ranges enabled: [ 0.000150] 00000-9FFFF write-back [ 0.000151] A0000-BFFFF uncachable [ 0.000152] C0000-E7FFF write-protect [ 0.000153] E8000-EFFFF write-combining [ 0.000153] F0000-FFFFF write-protect [ 0.000154] MTRR variable ranges enabled: [ 0.000156] 0 base 0000000000 mask 7F80000000 write-back [ 0.000157] 1 base 0080000000 mask 7FE0000000 write-back [ 0.000158] 2 base 009B000000 mask 7FFF000000 uncachable [ 0.000159] 3 base 009C000000 mask 7FFC000000 uncachable [ 0.000160] 4 base 00FFC00000 mask 7FFFC00000 write-protect [ 0.000161] 5 base 0100000000 mask 7F00000000 write-back [ 0.000162] 6 base 0200000000 mask 7F80000000 write-back [ 0.000163] 7 base 025F600000 mask 7FFFE00000 uncachable [ 0.000164] 8 base 025F800000 mask 7FFF800000 uncachable [ 0.000165] 9 base 0260000000 mask 7FE0000000 uncachable [ 0.001340] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001553] last_pfn = 0x9b000 max_arch_pfn = 0x400000000 [ 0.016070] Scanning 1 areas for low memory corruption [ 0.016074] Base memory trampoline at [(____ptrval____)] 82000 size 24576 [ 0.016077] Using GB pages for direct mapping [ 0.016080] BRK [0x2aa01000, 0x2aa01fff] PGTABLE [ 0.016082] BRK [0x2aa02000, 0x2aa02fff] PGTABLE [ 0.016083] BRK [0x2aa03000, 0x2aa03fff] PGTABLE [ 0.016141] BRK [0x2aa04000, 0x2aa04fff] PGTABLE [ 0.016143] BRK [0x2aa05000, 0x2aa05fff] PGTABLE [ 0.016611] BRK [0x2aa06000, 0x2aa06fff] PGTABLE [ 0.016748] BRK [0x2aa07000, 0x2aa07fff] PGTABLE [ 0.016835] BRK [0x2aa08000, 0x2aa08fff] PGTABLE [ 0.017208] log_buf_len: 4194304 bytes [ 0.017210] early log buf free: 123404(94%) [ 0.017210] Secure boot disabled [ 0.017212] RAMDISK: [mem 0x7f25a000-0x7fffefff] [ 0.017218] ACPI: Early table checksum verification disabled [ 0.017222] ACPI: RSDP 0x000000009AFFE014 000024 (v02 DELL ) [ 0.017227] ACPI: XSDT 0x000000009AFFE210 0000B4 (v01 DELL CL09 00000001 01000013) [ 0.017234] ACPI: FACP 0x000000009AFF9000 00010C (v05 DELL CL09 00000001 ASL 00040000) [ 0.017240] ACPI: DSDT 0x000000009AFE7000 00E06E (v01 DELL CL09 00000000 ASL 00040000) [ 0.017244] ACPI: FACS 0x000000009AFB8000 000040 [ 0.017248] ACPI: UEFI 0x000000009AFFD000 000236 (v01 DELL CL09 00000001 ASL 00040000) [ 0.017252] ACPI: FPDT 0x000000009AFFB000 000044 (v01 DELL CL09 00000001 ASL 00040000) [ 0.017255] ACPI: ASF! 0x000000009AFFA000 0000A5 (v32 DELL CL09 00000001 ASL 00040000) [ 0.017259] ACPI: HPET 0x000000009AFF8000 000038 (v01 DELL CL09 00000001 ASL 00040000) [ 0.017263] ACPI: APIC 0x000000009AFF7000 00008C (v03 DELL CL09 00000001 ASL 00040000) [ 0.017266] ACPI: MCFG 0x000000009AFF6000 00003C (v01 DELL CL09 00000001 ASL 00040000) [ 0.017270] ACPI: SSDT 0x000000009AFE6000 0006FE (v01 COMPAL CRV ORB 00001000 ACPI 00040000) [ 0.017274] ACPI: BOOT 0x000000009AFE4000 000028 (v01 DELL CL09 00000001 ASL 00040000) [ 0.017277] ACPI: LPIT 0x000000009AFE3000 000094 (v01 DELL CL09 00000000 ASL 00040000) [ 0.017281] ACPI: ASPT 0x000000009AFE1000 000034 (v07 DELL CL09 00000001 ASL 00040000) [ 0.017285] ACPI: DBGP 0x000000009AFE0000 000034 (v01 DELL CL09 00000001 ASL 00040000) [ 0.017289] ACPI: SSDT 0x000000009AFDA000 000539 (v01 COMPAL CRV ORB 00003000 ACPI 00040000) [ 0.017292] ACPI: SSDT 0x000000009AFD9000 000AD8 (v01 COMPAL CRV ORB 00003000 ACPI 00040000) [ 0.017296] ACPI: SSDT 0x000000009AFD5000 00355E (v01 COMPAL CRV ORB 00003000 ACPI 00040000) [ 0.017300] ACPI: SSDT 0x000000009AFD0000 002250 (v01 COMPAL CRV ORB 00001000 ACPI 00040000) [ 0.017304] ACPI: CSRT 0x000000009AFD3000 0000C4 (v01 DELL CL09 00000001 ASL 00040000) [ 0.017307] ACPI: BGRT 0x000000009AFD4000 000038 (v01 DELL CL09 00000001 ASL 00040000) [ 0.017318] ACPI: Local APIC address 0xfee00000 [ 0.017412] No NUMA configuration found [ 0.017413] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff] [ 0.017417] NODE_DATA(0) allocated [mem 0x25f1fa000-0x25f1fdfff] [ 0.017444] Zone ranges: [ 0.017445] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.017447] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.017448] Normal [mem 0x0000000100000000-0x000000025f5fffff] [ 0.017450] Device empty [ 0.017451] Movable zone start for each node [ 0.017452] Early memory node ranges [ 0.017453] node 0: [mem 0x0000000000001000-0x000000000006efff] [ 0.017454] node 0: [mem 0x0000000000070000-0x0000000000087fff] [ 0.017455] node 0: [mem 0x0000000000100000-0x0000000094d5ffff] [ 0.017456] node 0: [mem 0x0000000095d60000-0x000000009a36efff] [ 0.017456] node 0: [mem 0x000000009afff000-0x000000009affffff] [ 0.017457] node 0: [mem 0x0000000100000000-0x000000025f5fffff] [ 0.017979] Reserved but unavailable: 27914 pages [ 0.017980] Initmem setup node 0 [mem 0x0000000000001000-0x000000025f5fffff] [ 0.017982] On node 0 totalpages: 2066678 [ 0.017983] DMA zone: 64 pages used for memmap [ 0.017984] DMA zone: 21 pages reserved [ 0.017985] DMA zone: 3974 pages, LIFO batch:0 [ 0.018095] DMA32 zone: 9742 pages used for memmap [ 0.018096] DMA32 zone: 623472 pages, LIFO batch:63 [ 0.036483] Normal zone: 22488 pages used for memmap [ 0.036484] Normal zone: 1439232 pages, LIFO batch:63 [ 0.073926] Reserving Intel graphics memory at [mem 0x9ba00000-0x9f9fffff] [ 0.074015] ACPI: PM-Timer IO Port: 0x1808 [ 0.074017] ACPI: Local APIC address 0xfee00000 [ 0.074034] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.074036] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.074038] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.074039] ACPI: IRQ0 used by override. [ 0.074041] ACPI: IRQ9 used by override. [ 0.074043] Using ACPI (MADT) for SMP configuration information [ 0.074045] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.074057] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.074079] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.074081] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff] [ 0.074083] PM: Registered nosave memory: [mem 0x00088000-0x000bffff] [ 0.074084] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff] [ 0.074086] PM: Registered nosave memory: [mem 0x93ec3000-0x93ec3fff] [ 0.074087] PM: Registered nosave memory: [mem 0x93ecf000-0x93ecffff] [ 0.074088] PM: Registered nosave memory: [mem 0x93ed0000-0x93ed0fff] [ 0.074090] PM: Registered nosave memory: [mem 0x93ee0000-0x93ee0fff] [ 0.074092] PM: Registered nosave memory: [mem 0x94d60000-0x95d5ffff] [ 0.074094] PM: Registered nosave memory: [mem 0x95d61000-0x95d61fff] [ 0.074096] PM: Registered nosave memory: [mem 0x95d68000-0x95d68fff] [ 0.074097] PM: Registered nosave memory: [mem 0x9a36f000-0x9aebefff] [ 0.074098] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff] [ 0.074099] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff] [ 0.074101] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff] [ 0.074102] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff] [ 0.074102] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.074103] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff] [ 0.074104] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff] [ 0.074105] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff] [ 0.074105] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff] [ 0.074106] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff] [ 0.074107] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.074107] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.074108] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff] [ 0.074109] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.074110] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.074112] [mem 0x9fa00000-0xdfffffff] available for PCI devices [ 0.074113] Booting paravirtualized kernel on bare hardware [ 0.074116] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.223653] random: get_random_bytes called from start_kernel+0x95/0x53f with crng_init=0 [ 0.223662] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1 [ 0.223936] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144 [ 0.223945] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.223946] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.223973] Built 1 zonelists, mobility grouping on. Total pages: 2034363 [ 0.223974] Policy zone: Normal [ 0.223976] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img cryptdevice=PARTUUID=cf9d14dd-de5b-4e4e-9874-8badc535c98e:sys root=/dev/mapper/sys rw net.ifnames=0 i915.fastboot=1 drm.debug=0x1e log_buf_len=4M emergency [ 0.228696] Calgary: detecting Calgary via BIOS EBDA area [ 0.228698] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.254799] Memory: 7955344K/8266712K available (12300K kernel code, 1374K rwdata, 3640K rodata, 1512K init, 3884K bss, 311368K reserved, 0K cma-reserved) [ 0.254931] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.254937] Kernel/User page tables isolation: enabled [ 0.254991] ftrace: allocating 35535 entries in 139 pages [ 0.273411] rcu: Preemptible hierarchical RCU implementation. [ 0.273413] rcu: CONFIG_RCU_FANOUT set to non-default value of 32. [ 0.273413] rcu: RCU dyntick-idle grace-period acceleration is enabled. [ 0.273414] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8. [ 0.273415] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.273416] Tasks RCU enabled. [ 0.273417] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.275279] NR_IRQS: 20736, nr_irqs: 760, preallocated irqs: 16 [ 0.275485] rcu: Offload RCU callbacks from CPUs: (none). [ 0.275534] Console: colour dummy device 80x25 [ 0.275540] console [tty0] enabled [ 0.275559] ACPI: Core revision 20180810 [ 0.275818] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.275826] hpet clockevent registered [ 0.275830] APIC: Switch to symmetric I/O mode setup [ 0.276475] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.292499] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x25641fd0f1e, max_idle_ns: 440795327684 ns [ 0.292513] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.18 BogoMIPS (lpj=8646693) [ 0.292516] pid_max: default: 32768 minimum: 301 [ 0.298574] Security Framework initialized [ 0.298576] Yama: becoming mindful. [ 0.298582] AppArmor: AppArmor disabled by boot time parameter [ 0.300255] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.300887] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.300923] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.300942] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.301191] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.301192] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.301197] mce: CPU supports 7 MCE banks [ 0.301215] CPU0: Thermal monitoring enabled (TM1) [ 0.301228] process: using mwait in idle threads [ 0.301231] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.301232] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.301234] Spectre V2 : Mitigation: Full generic retpoline [ 0.301235] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.301236] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.301237] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.301238] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.301454] Freeing SMP alternatives memory: 28K [ 0.306017] TSC deadline timer enabled [ 0.306019] smpboot: CPU0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz (family: 0x6, model: 0x45, stepping: 0x1) [ 0.319182] mce: [Hardware Error]: Machine check events logged [ 0.319185] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 5: ae0000000040110a [ 0.319190] mce: [Hardware Error]: TSC 0 ADDR ffb070c0 MISC b8a0000086 [ 0.319197] mce: [Hardware Error]: PROCESSOR 0:40651 TIME 1541498766 SOCKET 0 APIC 0 microcode 24 [ 0.325842] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.325898] ... version: 3 [ 0.325899] ... bit width: 48 [ 0.325899] ... generic registers: 4 [ 0.325900] ... value mask: 0000ffffffffffff [ 0.325901] ... max period: 00007fffffffffff [ 0.325902] ... fixed-purpose events: 3 [ 0.325903] ... event mask: 000000070000000f [ 0.332504] rcu: Hierarchical SRCU implementation. [ 0.353148] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.359174] smp: Bringing up secondary CPUs ... [ 0.399185] x86: Booting SMP configuration: [ 0.399187] .... node #0, CPUs: #1 #2 #3 [ 0.479675] smp: Brought up 1 node, 4 CPUs [ 0.479675] smpboot: Max logical packages: 2 [ 0.479675] smpboot: Total of 4 processors activated (20760.73 BogoMIPS) [ 0.482763] devtmpfs: initialized [ 0.482763] x86/mm: Memory block size: 128MB [ 0.483355] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes) [ 0.483355] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.483355] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.483355] pinctrl core: initialized pinctrl subsystem [ 0.483355] RTC time: 10:06:06, date: 11/06/18 [ 0.483355] NET: Registered protocol family 16 [ 0.483355] audit: initializing netlink subsys (disabled) [ 0.483355] audit: type=2000 audit(1541498766.206:1): state=initialized audit_enabled=0 res=1 [ 0.483355] cpuidle: using governor ladder [ 0.485843] cpuidle: using governor menu [ 0.485890] Simple Boot Flag at 0x44 set to 0x1 [ 0.485923] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.485924] ACPI: bus type PCI registered [ 0.485926] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.485994] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.486009] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.486009] PCI: Using configuration type 1 for base access [ 0.486009] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.487058] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.487058] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.487058] fbcon: Taking over console [ 0.487058] ipmi:dmi: Invalid offset: 0 [ 0.487058] ACPI: Added _OSI(Module Device) [ 0.487058] ACPI: Added _OSI(Processor Device) [ 0.487058] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.487058] ACPI: Added _OSI(Processor Aggregator Device) [ 0.487058] ACPI: Added _OSI(Linux-Dell-Video) [ 0.487058] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.505835] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.509167] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.509167] ACPI: Dynamic OEM Table Load: [ 0.509167] ACPI: SSDT 0xFFFF9833D5614000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20130117) [ 0.509167] ACPI: Dynamic OEM Table Load: [ 0.509167] ACPI: SSDT 0xFFFF9833D5401000 0005AA (v01 PmRef ApIst 00003000 INTL 20130117) [ 0.512951] ACPI: Dynamic OEM Table Load: [ 0.512958] ACPI: SSDT 0xFFFF9833D565EC00 000119 (v01 PmRef ApCst 00003000 INTL 20130117) [ 0.514557] ACPI: EC: EC started [ 0.514558] ACPI: EC: interrupt blocked [ 0.675863] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.675865] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.675867] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 0.675868] ACPI: Interpreter enabled [ 0.675913] ACPI: (supports S0 S3 S4 S5) [ 0.675914] ACPI: Using IOAPIC for interrupt routing [ 0.675950] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.676439] ACPI: Enabled 9 GPEs in block 00 to 7F [ 0.682978] ACPI: Power Resource [AMD3] (on) [ 0.683016] ACPI: Power Resource [AMD2] (on) [ 0.690035] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.690042] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.690883] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.690885] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.691609] PCI host bridge to bus 0000:00 [ 0.691612] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.691614] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.691616] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.691617] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.691619] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.691621] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.691622] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.691624] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.691626] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.691627] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.691629] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.691630] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.691632] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.691634] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.691635] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.691637] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] [ 0.691638] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window] [ 0.691641] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.691650] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 0.691866] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 [ 0.691881] pci 0000:00:02.0: reg 0x10: [mem 0xb0400000-0xb07fffff 64bit] [ 0.691888] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.691893] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 0.691909] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.692103] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 0.692115] pci 0000:00:03.0: reg 0x10: [mem 0xb0c10000-0xb0c13fff 64bit] [ 0.692346] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 0.692367] pci 0000:00:14.0: reg 0x10: [mem 0xb0c00000-0xb0c0ffff 64bit] [ 0.692428] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.692629] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 [ 0.692653] pci 0000:00:16.0: reg 0x10: [mem 0xb0c18000-0xb0c1801f 64bit] [ 0.692724] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.692922] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 0.692942] pci 0000:00:1b.0: reg 0x10: [mem 0xb0c14000-0xb0c17fff 64bit] [ 0.693012] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.693200] pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400 [ 0.693277] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.693546] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400 [ 0.693623] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.693886] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400 [ 0.693962] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.694166] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 [ 0.699173] pci 0000:00:1d.0: reg 0x10: [mem 0xb0c1c000-0xb0c1c3ff] [ 0.704296] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.704500] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 [ 0.704803] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 [ 0.704820] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f] [ 0.704827] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097] [ 0.704835] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087] [ 0.704842] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093] [ 0.704849] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f] [ 0.704857] pci 0000:00:1f.2: reg 0x24: [mem 0xb0c1b000-0xb0c1b7ff] [ 0.704892] pci 0000:00:1f.2: PME# supported from D3hot [ 0.705075] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 [ 0.705094] pci 0000:00:1f.3: reg 0x10: [mem 0xb0c19000-0xb0c190ff 64bit] [ 0.705114] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f] [ 0.705387] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000 [ 0.705426] pci 0000:01:00.0: reg 0x10: [io 0x4000-0x40ff] [ 0.705459] pci 0000:01:00.0: reg 0x18: [mem 0xb0b00000-0xb0b00fff 64bit] [ 0.705482] pci 0000:01:00.0: reg 0x20: [mem 0xb0800000-0xb0803fff 64bit pref] [ 0.705602] pci 0000:01:00.0: supports D1 D2 [ 0.705604] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.705758] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.705762] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.705765] pci 0000:00:1c.0: bridge window [mem 0xb0b00000-0xb0bfffff] [ 0.705770] pci 0000:00:1c.0: bridge window [mem 0xb0800000-0xb08fffff 64bit pref] [ 0.705872] pci 0000:02:00.0: [8086:08b3] type 00 class 0x028000 [ 0.705941] pci 0000:02:00.0: reg 0x10: [mem 0xb0a00000-0xb0a01fff 64bit] [ 0.706161] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.706232] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:1c.3 (capable of 7.876 Gb/s with 8 GT/s x1 link) [ 0.706359] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.706365] pci 0000:00:1c.3: bridge window [mem 0xb0a00000-0xb0afffff] [ 0.706453] pci 0000:03:00.0: [1002:6900] type 00 class 0x038000 [ 0.706511] pci 0000:03:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.706535] pci 0000:03:00.0: reg 0x18: [mem 0xb0000000-0xb01fffff 64bit pref] [ 0.706549] pci 0000:03:00.0: reg 0x20: [io 0x3000-0x30ff] [ 0.706562] pci 0000:03:00.0: reg 0x24: [mem 0xb0900000-0xb093ffff] [ 0.706576] pci 0000:03:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.706591] pci 0000:03:00.0: enabling Extended Tags [ 0.706726] pci 0000:03:00.0: supports D1 D2 [ 0.706789] pci 0000:03:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 63.008 Gb/s with 8 GT/s x8 link) [ 0.706901] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.706904] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.706907] pci 0000:00:1c.4: bridge window [mem 0xb0900000-0xb09fffff] [ 0.706912] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xb01fffff 64bit pref] [ 0.787738] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.787821] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.787902] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.787982] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.788061] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.788140] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.788220] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.788300] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.789169] ACPI: EC: interrupt unblocked [ 0.789169] ACPI: EC: event unblocked [ 0.789169] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.789169] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.789178] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.789178] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.789182] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.789183] vgaarb: loaded [ 0.789328] ACPI: bus type USB registered [ 0.789343] usbcore: registered new interface driver usbfs [ 0.789350] usbcore: registered new interface driver hub [ 0.789373] usbcore: registered new device driver usb [ 0.969182] pps_core: LinuxPPS API ver. 1 registered [ 0.969182] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.969182] PTP clock support registered [ 0.969182] EDAC MC: Ver: 3.0.0 [ 0.969187] Registered efivars operations [ 1.191446] PCI: Using ACPI for IRQ routing [ 1.194362] PCI: pci_cache_line_size set to 64 bytes [ 1.194439] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff] [ 1.194441] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff] [ 1.194442] e820: reserve RAM buffer [mem 0x93ec3018-0x93ffffff] [ 1.194444] e820: reserve RAM buffer [mem 0x93ed0018-0x93ffffff] [ 1.194445] e820: reserve RAM buffer [mem 0x94d60000-0x97ffffff] [ 1.194446] e820: reserve RAM buffer [mem 0x95d61018-0x97ffffff] [ 1.194448] e820: reserve RAM buffer [mem 0x9a36f000-0x9bffffff] [ 1.194449] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff] [ 1.194451] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff] [ 1.195835] NetLabel: Initializing [ 1.195835] NetLabel: domain hash size = 128 [ 1.195835] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.195835] NetLabel: unlabeled traffic allowed by default [ 1.196244] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.196253] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.200192] clocksource: Switched to clocksource tsc-early [ 1.211379] VFS: Disk quotas dquot_6.6.0 [ 1.211399] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.211484] pnp: PnP ACPI init [ 1.211696] system 00:00: [io 0x0680-0x069f] has been reserved [ 1.211699] system 00:00: [io 0xfd60-0xfd63] has been reserved [ 1.211701] system 00:00: [io 0xffff] has been reserved [ 1.211703] system 00:00: [io 0xffff] has been reserved [ 1.211705] system 00:00: [io 0xffff] has been reserved [ 1.211707] system 00:00: [io 0x1800-0x18fe] has been reserved [ 1.211709] system 00:00: [io 0x164e-0x164f] has been reserved [ 1.211716] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.211782] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.211848] system 00:02: [io 0x1854-0x1857] has been reserved [ 1.211853] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 1.211906] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.211938] pnp 00:04: Plug and Play ACPI device, IDs DLL063f PNP0f13 (active) [ 1.289403] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.289406] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.289408] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.289410] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.289412] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 1.289414] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.289417] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 1.289419] system 00:05: [mem 0xff000000-0xff000fff] has been reserved [ 1.289421] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved [ 1.289423] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.289425] system 00:05: [mem 0x9fa21000-0x9fa21fff] has been reserved [ 1.289427] system 00:05: [mem 0x9fa10000-0x9fa1ffff] has been reserved [ 1.289432] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.289897] system 00:06: [mem 0xb0c1f000-0xb0c1ffff] has been reserved [ 1.289900] system 00:06: [mem 0xb0c1d000-0xb0c1dfff] has been reserved [ 1.289904] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.291008] pnp: PnP ACPI: found 7 devices [ 1.296985] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.296991] pci 0000:03:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 1.297015] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.297018] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 1.297023] pci 0000:00:1c.0: bridge window [mem 0xb0b00000-0xb0bfffff] [ 1.297027] pci 0000:00:1c.0: bridge window [mem 0xb0800000-0xb08fffff 64bit pref] [ 1.297032] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 1.297037] pci 0000:00:1c.3: bridge window [mem 0xb0a00000-0xb0afffff] [ 1.297047] pci 0000:03:00.0: BAR 6: assigned [mem 0xb0940000-0xb095ffff pref] [ 1.297049] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 1.297051] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 1.297056] pci 0000:00:1c.4: bridge window [mem 0xb0900000-0xb09fffff] [ 1.297059] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xb01fffff 64bit pref] [ 1.297066] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.297067] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.297069] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.297071] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 1.297073] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 1.297074] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 1.297076] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 1.297078] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 1.297080] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 1.297081] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 1.297083] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 1.297085] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 1.297087] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 1.297088] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 1.297090] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 1.297092] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] [ 1.297094] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff window] [ 1.297096] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 1.297097] pci_bus 0000:01: resource 1 [mem 0xb0b00000-0xb0bfffff] [ 1.297099] pci_bus 0000:01: resource 2 [mem 0xb0800000-0xb08fffff 64bit pref] [ 1.297101] pci_bus 0000:02: resource 1 [mem 0xb0a00000-0xb0afffff] [ 1.297103] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 1.297104] pci_bus 0000:03: resource 1 [mem 0xb0900000-0xb09fffff] [ 1.297106] pci_bus 0000:03: resource 2 [mem 0xa0000000-0xb01fffff 64bit pref] [ 1.297300] NET: Registered protocol family 2 [ 1.297464] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) [ 1.297498] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.297617] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.297745] TCP: Hash tables configured (established 65536 bind 65536) [ 1.297785] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.297811] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.297877] NET: Registered protocol family 1 [ 1.297882] NET: Registered protocol family 44 [ 1.297892] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.315976] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c6 took 16229 usecs [ 1.316010] PCI: CLS 64 bytes, default 64 [ 1.316047] Unpacking initramfs... [ 1.545733] Freeing initrd memory: 13972K [ 1.545737] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.545739] software IO TLB: mapped [mem 0x8ed70000-0x92d70000] (64MB) [ 1.545917] Scanning for low memory corruption every 60 seconds [ 1.546613] Initialise system trusted keyrings [ 1.546625] Key type blacklist registered [ 1.546669] workingset: timestamp_bits=41 max_order=21 bucket_order=0 [ 1.548079] zbud: loaded [ 1.548412] pstore: using zstd compression [ 1.549768] Key type asymmetric registered [ 1.549770] Asymmetric key parser 'x509' registered [ 1.549780] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.549820] io scheduler noop registered [ 1.549821] io scheduler deadline registered [ 1.549851] io scheduler cfq registered (default) [ 1.549853] io scheduler mq-deadline registered [ 1.549854] io scheduler kyber registered [ 1.549878] io scheduler bfq registered [ 1.550698] pcieport 0000:00:1c.0: Signaling PME with IRQ 40 [ 1.550718] pcieport 0000:00:1c.3: Signaling PME with IRQ 41 [ 1.550739] pcieport 0000:00:1c.4: Signaling PME with IRQ 42 [ 1.550764] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.550847] efifb: probing for efifb [ 1.550864] efifb: framebuffer at 0xc0000000, using 4128k, total 4128k [ 1.550865] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 1.550866] efifb: scrolling: redraw [ 1.550868] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.550959] Console: switching to colour frame buffer device 170x48 [ 1.553449] fb0: EFI VGA frame buffer device [ 1.553459] intel_idle: MWAIT substates: 0x11142120 [ 1.553460] intel_idle: v0.4.1 model 0x45 [ 1.553708] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.553769] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input0 [ 1.553783] ACPI: Lid Switch [LID0] [ 1.553822] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input1 [ 1.553832] ACPI: Power Button [PWRB] [ 1.553867] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input2 [ 1.553874] ACPI: Sleep Button [SLPB] [ 1.553945] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.553953] ACPI: Power Button [PWRF] [ 1.554551] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.555633] usbcore: registered new interface driver usbserial_generic [ 1.555639] usbserial: USB Serial support registered for generic [ 1.555659] rtc_cmos 00:01: RTC can wake from S4 [ 1.555806] rtc_cmos 00:01: registered as rtc0 [ 1.555822] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.555896] intel_pstate: Intel P-state driver initializing [ 1.556103] ledtrig-cpu: registered to indicate activity on CPUs [ 1.556703] NET: Registered protocol family 10 [ 1.566275] Segment Routing with IPv6 [ 1.566329] NET: Registered protocol family 17 [ 1.567081] RAS: Correctable Errors collector initialized. [ 1.567166] microcode: sig=0x40651, pf=0x40, revision=0x24 [ 1.567304] microcode: Microcode Update Driver: v2.2. [ 1.567328] sched_clock: Marking stable (1566960872, 326359)->(1590443018, -23155787) [ 1.567919] registered taskstats version 1 [ 1.567935] Loading compiled-in X.509 certificates [ 1.571886] Loaded X.509 cert 'Build time autogenerated kernel key: 37e5b101d1a6bb3b2809ab14b447ced0fed0de4e' [ 1.571912] zswap: loaded using pool lzo/zbud [ 1.575603] Key type big_key registered [ 1.576169] Magic number: 10:604:122 [ 1.576217] acpi LNXSYBUS:00: hash matches [ 1.576265] rtc_cmos 00:01: setting system clock to 2018-11-06 10:06:07 UTC (1541498767) [ 1.578304] Freeing unused decrypted memory: 2040K [ 1.579266] Freeing unused kernel image memory: 1512K [ 1.579313] Write protecting the kernel read-only data: 18432k [ 1.579959] Freeing unused kernel image memory: 2008K [ 1.580116] Freeing unused kernel image memory: 456K [ 1.588014] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.588016] x86/mm: Checking user space page tables [ 1.594287] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.594288] Run /init as init process [ 2.097345] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.114642] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.128204] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.128260] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.130544] cryptd: max_cpu_qlen set to 1000 [ 2.133156] SCSI subsystem initialized [ 2.139639] AVX2 version of gcm_enc/dec engaged. [ 2.139640] AES CTR mode by8 optimization enabled [ 2.142550] ehci-pci: EHCI PCI platform driver [ 2.142785] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.142793] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 2.142805] ehci-pci 0000:00:1d.0: debug port 2 [ 2.146719] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.146737] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb0c1c000 [ 2.148350] libata version 3.00 loaded. [ 2.152543] ahci 0000:00:1f.2: version 3.0 [ 2.159188] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.159228] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 2.159230] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.159231] usb usb1: Product: EHCI Host Controller [ 2.159232] usb usb1: Manufacturer: Linux 4.19.1-arch1-1-ARCH ehci_hcd [ 2.159233] usb usb1: SerialNumber: 0000:00:1d.0 [ 2.159333] hub 1-0:1.0: USB hub found [ 2.159337] hub 1-0:1.0: 2 ports detected [ 2.159470] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.159478] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 2.160539] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810 [ 2.160543] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.160669] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 2.160670] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.160672] usb usb2: Product: xHCI Host Controller [ 2.160673] usb usb2: Manufacturer: Linux 4.19.1-arch1-1-ARCH xhci-hcd [ 2.160674] usb usb2: SerialNumber: 0000:00:14.0 [ 2.160774] hub 2-0:1.0: USB hub found [ 2.160787] hub 2-0:1.0: 9 ports detected [ 2.162372] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.162378] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.162382] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 2.162427] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 2.162430] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.162431] usb usb3: Product: xHCI Host Controller [ 2.162432] usb usb3: Manufacturer: Linux 4.19.1-arch1-1-ARCH xhci-hcd [ 2.162433] usb usb3: SerialNumber: 0000:00:14.0 [ 2.162553] hub 3-0:1.0: USB hub found [ 2.162564] hub 3-0:1.0: 4 ports detected [ 2.162809] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode [ 2.162811] ahci 0000:00:1f.2: flags: 64bit ncq led clo only pio slum part deso sadm sds apst [ 2.163651] scsi host0: ahci [ 2.163881] scsi host1: ahci [ 2.164181] scsi host2: ahci [ 2.164233] ata1: SATA max UDMA/133 abar m2048@0xb0c1b000 port 0xb0c1b100 irq 43 [ 2.164234] ata2: DUMMY [ 2.164235] ata3: DUMMY [ 2.186854] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.476435] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.483059] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30003, max UDMA/133 [ 2.483063] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.489263] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.489768] ata1.00: configured for UDMA/133 [ 2.490117] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0003 PQ: 0 ANSI: 5 [ 2.498040] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.498044] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.498056] sd 0:0:0:0: [sda] Write Protect is off [ 2.498060] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.498075] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.569258] tsc: Refined TSC clocksource calibration: 2593.994 MHz [ 2.569275] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256412811b4, max_idle_ns: 440795306987 ns [ 2.569313] clocksource: Switched to clocksource tsc [ 2.588543] sda: sda1 sda2 sda3 [ 2.589391] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.640022] usb 1-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ 2.640026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.640522] hub 1-1:1.0: USB hub found [ 2.640687] hub 1-1:1.0: 8 ports detected [ 2.897424] device-mapper: uevent: version 1.0.3 [ 2.897479] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 2.925939] usb 1-1.3: new full-speed USB device number 3 using ehci-pci [ 3.028036] usb 1-1.3: New USB device found, idVendor=248a, idProduct=8367, bcdDevice= 1.00 [ 3.028041] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.028045] usb 1-1.3: Product: Wireless Receiver [ 3.028048] usb 1-1.3: Manufacturer: Telink [ 3.037326] hidraw: raw HID events driver (C) Jiri Kosina [ 3.045123] usbcore: registered new interface driver usbhid [ 3.045124] usbhid: USB HID core driver [ 3.047002] input: Telink Wireless Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:248A:8367.0001/input/input6 [ 3.047040] input: Telink Wireless Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:248A:8367.0001/input/input7 [ 3.102580] usb 1-1.5: new full-speed USB device number 4 using ehci-pci [ 3.102679] input: Telink Wireless Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:248A:8367.0001/input/input8 [ 3.102753] hid-generic 0003:248A:8367.0001: input,hidraw0: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-0000:00:1d.0-1.3/input0 [ 3.102955] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:248A:8367.0002/input/input9 [ 3.159354] hid-generic 0003:248A:8367.0002: input,hidraw1: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-0000:00:1d.0-1.3/input1 [ 3.202173] usb 1-1.5: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01 [ 3.202180] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.279279] usb 1-1.7: new high-speed USB device number 5 using ehci-pci [ 3.293824] random: fast init done [ 3.377330] usb 1-1.7: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60 [ 3.377337] usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.377341] usb 1-1.7: Product: USB2.0-CRW [ 3.377345] usb 1-1.7: Manufacturer: Generic [ 3.377348] usb 1-1.7: SerialNumber: 20100201396000000 [ 3.387234] usbcore: registered new interface driver rtsx_usb [ 6.269934] random: crng init done [ 7.071504] NET: Registered protocol family 38 [ 7.407138] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 9.709736] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 9.726151] systemd[1]: Detected architecture x86-64. [ 9.764105] systemd[1]: Set hostname to . [ 13.272800] systemd[1]: Started Emergency Shell. [ 13.273162] systemd[1]: Reached target Emergency Mode. [ 13.282695] systemd[1]: Startup finished in 1.370s (firmware) + 8.657s (loader) + 9.145s (kernel) + 4.136s (userspace) = 23.310s. [ 13.312705] systemd[305]: emergency.service: Executable /bin/plymouth missing, skipping: No such file or directory [ 28.913419] MARK: modprobing i915 [ 29.150969] Linux agpgart interface v0.103 [ 29.327641] VFIO - User Level meta-driver version: 0.3 [ 29.481675] [drm:intel_pch_type [i915]] Found LynxPoint LP PCH [ 29.481697] [drm:i915_driver_load [i915]] WOPCM size: 1024KiB [ 29.481725] [drm:intel_uc_init_early [i915]] enable_guc=0 (submission:no huc:no) [ 29.481746] [drm:i915_driver_load [i915]] guc_log_level=0 (enabled:no, verbose:no, verbosity:0) [ 29.481770] [drm:intel_power_domains_init [i915]] Allowed DC state mask 00 [ 29.481856] [drm:i915_driver_load [i915]] ppgtt mode: 1 [ 29.481889] [drm:i915_ggtt_probe_hw [i915]] GGTT size = 2048M [ 29.481910] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M [ 29.481929] [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M [ 29.481931] checking generic (c0000000 408000) vs hw (c0000000 10000000) [ 29.481932] fb: switching to inteldrmfb from EFI VGA [ 29.481949] Console: switching to colour dummy device 80x25 [ 29.482034] [drm] Replacing VGA console driver [ 29.482073] [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 9f900017 [ 29.482098] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K [ 29.482168] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params [ 29.482199] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x9afb2018 [ 29.482231] [drm:intel_opregion_setup [i915]] Public ACPI methods supported [ 29.482255] [drm:intel_opregion_setup [i915]] SWSCI supported [ 29.483164] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 [ 29.483188] [drm:intel_opregion_setup [i915]] ASLE supported [ 29.483210] [drm:intel_opregion_setup [i915]] ASLE extension supported [ 29.483233] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 29.483234] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 29.483235] [drm] Driver supports precise vblank timestamp query. [ 29.483267] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz [ 29.483294] [drm:intel_bios_init [i915]] VBT signature "$VBT HASWELL ", BDB version 177 [ 29.483320] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 29.483344] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 0 [ 29.483692] [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) [ 29.483724] [drm:intel_bios_init [i915]] Panel type: 2 (VBT) [ 29.483754] [drm:intel_bios_init [i915]] DRRS supported mode is seamless [ 29.483784] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables: [ 29.483801] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 29.483829] [drm:intel_bios_init [i915]] VBT initial LVDS value 300 [ 29.483857] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 13, level 255, controller 0 [ 29.483886] [drm:intel_bios_init [i915]] Found SDVO panel mode in BIOS VBT tables: [ 29.483900] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 29.483927] [drm:intel_bios_init [i915]] DRRS State Enabled:0 [ 29.483955] [drm:intel_bios_init [i915]] No SDVO device info is found in VBT [ 29.483983] [drm:intel_bios_init [i915]] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 29.484009] [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0 [ 29.484037] [drm:intel_bios_init [i915]] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 29.484064] [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 6 [ 29.484110] [drm:intel_dsm_detect [i915]] no _DSM method for intel device [ 29.484150] [drm:i915_driver_load [i915]] rawclk rate: 24000 kHz [ 29.484187] [drm:intel_power_well_enable [i915]] enabling always-on [ 29.484219] [drm:intel_power_well_enable [i915]] enabling display [ 29.484224] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 29.484593] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 [ 29.484635] [drm:intel_print_wm_latency [i915]] Primary WM0 latency 20 (2.0 usec) [ 29.484662] [drm:intel_print_wm_latency [i915]] Primary WM1 latency 4 (2.0 usec) [ 29.484688] [drm:intel_print_wm_latency [i915]] Primary WM2 latency 36 (18.0 usec) [ 29.484712] [drm:intel_print_wm_latency [i915]] Primary WM3 latency 90 (45.0 usec) [ 29.484735] [drm:intel_print_wm_latency [i915]] Primary WM4 latency 160 (80.0 usec) [ 29.484758] [drm:intel_print_wm_latency [i915]] Sprite WM0 latency 20 (2.0 usec) [ 29.484781] [drm:intel_print_wm_latency [i915]] Sprite WM1 latency 4 (2.0 usec) [ 29.484803] [drm:intel_print_wm_latency [i915]] Sprite WM2 latency 36 (18.0 usec) [ 29.484824] [drm:intel_print_wm_latency [i915]] Sprite WM3 latency 90 (45.0 usec) [ 29.484846] [drm:intel_print_wm_latency [i915]] Sprite WM4 latency 160 (80.0 usec) [ 29.484867] [drm:intel_print_wm_latency [i915]] Cursor WM0 latency 20 (2.0 usec) [ 29.484888] [drm:intel_print_wm_latency [i915]] Cursor WM1 latency 4 (2.0 usec) [ 29.484909] [drm:intel_print_wm_latency [i915]] Cursor WM2 latency 36 (18.0 usec) [ 29.484930] [drm:intel_print_wm_latency [i915]] Cursor WM3 latency 90 (45.0 usec) [ 29.484951] [drm:intel_print_wm_latency [i915]] Cursor WM4 latency 160 (80.0 usec) [ 29.484988] [drm:intel_modeset_init [i915]] 3 display pipes available. [ 29.485060] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 450000 kHz, VCO 0 kHz, ref 0 kHz, bypass 0 kHz, voltage level 0 [ 29.485092] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 450000 kHz [ 29.485124] [drm:intel_modeset_init [i915]] Max dotclock rate: 450000 kHz [ 29.485467] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port A [ 29.485502] [drm:intel_dp_init_connector [i915]] using AUX A for port A (VBT) [ 29.485540] [drm:intel_pps_dump_state [i915]] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000 [ 29.485570] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 29.485599] [drm:intel_dp_init_panel_power_sequencer [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 [ 29.485626] [drm:intel_dp_init_panel_power_sequencer [i915]] backlight on delay 1, off delay 200 [ 29.485661] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 29.485685] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on [ 29.485711] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f [ 29.486340] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 81 41 00 00 01 00 02 00 00 00 00 00 00 [ 29.486892] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 29.487310] [drm:intel_dp_init_connector [i915]] eDP DPCD: 01 00 04 [ 29.493210] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 29.493228] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 29.493245] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 29.493270] [drm:intel_dp_init_connector [i915]] VBT doesn't support DRRS [ 29.493299] [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, enabled, brightness 937/937 [ 29.493327] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B [ 29.493350] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT) [ 29.493380] [drm:intel_modeset_init [i915]] VBT says port C is not DVI/HDMI/DP compatible, respect it [ 29.493470] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1 [ 29.493492] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1 [ 29.493512] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1 [ 29.493532] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:39:pipe A] hw state readout: enabled [ 29.493552] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0 [ 29.493570] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0 [ 29.493589] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0 [ 29.493607] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe B] hw state readout: disabled [ 29.493625] [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0 [ 29.493643] [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0 [ 29.493661] [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0 [ 29.493678] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:63:pipe C] hw state readout: disabled [ 29.493697] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0 [ 29.493715] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 29.493733] [drm:intel_modeset_setup_hw_state [i915]] SPLL hw state readout: crtc_mask 0x00000001, on 1 [ 29.493751] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1 [ 29.493768] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 hw state readout: crtc_mask 0x00000000, on 1 [ 29.493786] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1 [ 29.493806] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:64:DDI A] hw state readout: enabled, pipe A [ 29.493824] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:72:DDI B] hw state readout: disabled, pipe A [ 29.493842] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:65:eDP-1] hw state readout: enabled [ 29.493860] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:73:HDMI-A-1] hw state readout: disabled [ 29.493871] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [MODE:1366x768] for [CRTC:39:pipe A] state 000000004b5919df [ 29.493897] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe A][setup_hw_state] [ 29.493918] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100) [ 29.493938] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 0 [ 29.493957] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 5347087, gmch_n: 8388608, link_m: 148530, link_n: 524288, tu: 64 [ 29.493975] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 29.493993] [drm:intel_dump_pipe_config [i915]] requested mode: [ 29.494003] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 76490 1366 1374 1384 1558 768 771 772 816 0x40 0x9 [ 29.494020] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 29.494029] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 76490 1366 1374 1384 1558 768 771 772 816 0x40 0x9 [ 29.494048] [drm:intel_dump_pipe_config [i915]] crtc timings: 76490 1366 1374 1384 1558 768 771 772 816, type: 0x40 flags: 0x9 [ 29.494066] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1366x768, pixel rate 76490 [ 29.494084] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 29.494101] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 29.494119] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000 [ 29.494136] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 29.494154] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] disabled, scaler_id = 0 [ 29.494171] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = 0 [ 29.494188] [drm:intel_dump_pipe_config [i915]] [PLANE:36:cursor A] disabled, scaler_id = 0 [ 29.494206] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe B][setup_hw_state] [ 29.494223] [drm:intel_dump_pipe_config [i915]] output_types: (0x0) [ 29.494240] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0 [ 29.494257] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 29.494274] [drm:intel_dump_pipe_config [i915]] requested mode: [ 29.494283] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 29.494301] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 29.494309] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 29.494328] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 29.494345] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 29.494362] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 29.494379] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 29.494397] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 29.494413] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 29.494431] [drm:intel_dump_pipe_config [i915]] [PLANE:40:primary B] disabled, scaler_id = 0 [ 29.494448] [drm:intel_dump_pipe_config [i915]] [PLANE:43:sprite B] disabled, scaler_id = 0 [ 29.494465] [drm:intel_dump_pipe_config [i915]] [PLANE:48:cursor B] disabled, scaler_id = 0 [ 29.494482] [drm:intel_dump_pipe_config [i915]] [CRTC:63:pipe C][setup_hw_state] [ 29.494499] [drm:intel_dump_pipe_config [i915]] output_types: (0x0) [ 29.494516] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0 [ 29.494533] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 29.494550] [drm:intel_dump_pipe_config [i915]] requested mode: [ 29.494559] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 29.494576] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 29.494585] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 29.494603] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 29.494621] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 29.494638] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 29.494655] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 29.494672] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 29.494689] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 29.494706] [drm:intel_dump_pipe_config [i915]] [PLANE:52:primary C] disabled, scaler_id = 0 [ 29.494723] [drm:intel_dump_pipe_config [i915]] [PLANE:55:sprite C] disabled, scaler_id = 0 [ 29.494740] [drm:intel_dump_pipe_config [i915]] [PLANE:60:cursor C] disabled, scaler_id = 0 [ 29.494760] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 enabled but not in use, disabling [ 29.494779] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 enabled but not in use, disabling [ 29.494798] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 enabled but not in use, disabling [ 29.494826] [drm:intel_power_well_disable [i915]] disabling display [ 29.494851] [drm:i9xx_get_initial_plane_config [i915]] pipe A/primary A with fb: size=1366x768@32, offset=0, pitch 5504, size 0x408000 [ 29.494877] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, gtt_offset=0x0000000000000000, size=0x0000000000408000 [ 29.494905] [drm:intel_alloc_initial_plane_obj.isra.96 [i915]] initial plane fb obj 00000000057f5f05 [ 29.494944] [drm:intel_modeset_init [i915]] pipe A active planes 0x1 [ 29.494954] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000f1b777e0 [ 29.494963] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:39:pipe A] 00000000a3a14f28 state to 00000000f1b777e0 [ 29.494972] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe B] 000000005614dda3 state to 00000000f1b777e0 [ 29.494980] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:63:pipe C] 00000000e64b9f2a state to 00000000f1b777e0 [ 29.494989] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:28:primary A] 00000000bbbfd6af state to 00000000f1b777e0 [ 29.494997] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:sprite A] 0000000045283a92 state to 00000000f1b777e0 [ 29.495005] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:36:cursor A] 000000001f315cf9 state to 00000000f1b777e0 [ 29.495013] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:40:primary B] 0000000024bf5bfe state to 00000000f1b777e0 [ 29.495020] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:43:sprite B] 00000000ddefc8ba state to 00000000f1b777e0 [ 29.495028] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:48:cursor B] 00000000d5e1fb63 state to 00000000f1b777e0 [ 29.495036] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:primary C] 00000000f03b84e1 state to 00000000f1b777e0 [ 29.495044] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:55:sprite C] 000000008d0dbbfa state to 00000000f1b777e0 [ 29.495052] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:cursor C] 000000005e0ab528 state to 00000000f1b777e0 [ 29.495060] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:65:eDP-1] 00000000be95ead0 state to 00000000f1b777e0 [ 29.495068] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:73:HDMI-A-1] 0000000095d86792 state to 00000000f1b777e0 [ 29.495074] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1] [ 29.495079] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 29.495083] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:73:HDMI-A-1] [ 29.495087] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Disabling [CONNECTOR:73:HDMI-A-1] [ 29.495112] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 79 [ 29.495133] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 29.495147] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000f1b777e0 [ 29.495156] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000f1b777e0 [ 29.495208] [drm:intel_wopcm_init [i915]] Calculated GuC WOPCM Region: [16KiB, 1008KiB) [ 29.495293] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [409000, 80000000] [ 29.496394] [drm:intel_ctx_workarounds_init [i915]] Number of context specific w/a: 0 [ 29.496416] [drm:i915_gem_contexts_init [i915]] logical context support initialized [ 29.496620] [drm:intel_init_gt_powersave [i915]] Overclocking supported, max: 1100MHz, overclock: 1100MHz [ 29.496770] [drm:sandybridge_pcode_read [i915]] warning: pcode (read from mbox 5) mailbox access failed for intel_enable_gt_powersave [i915]: -6 [ 29.496882] [drm:intel_fbdev_init [i915]] found possible fb from plane A [ 29.496910] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping [ 29.496935] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping [ 29.496958] [drm:intel_fbdev_init [i915]] checking plane A for BIOS fb [ 29.496981] [drm:intel_fbdev_init [i915]] pipe A area: 1366x768, bpp: 32, size: 4227072 [ 29.497002] [drm:intel_fbdev_init [i915]] fb big enough for plane A (4227072 >= 4227072) [ 29.497023] [drm:intel_fbdev_init [i915]] pipe B not active, skipping [ 29.497044] [drm:intel_fbdev_init [i915]] pipe C not active, skipping [ 29.497064] [drm:intel_fbdev_init [i915]] using BIOS fb for initial console [ 29.497284] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered [ 29.497313] [drm:intel_dp_connector_register [i915]] registering DPDDC-A bus for card0-eDP-1 [ 29.497729] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0 [ 29.497818] [drm:intel_opregion_register [i915]] 2 outputs detected [ 29.498824] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 29.499039] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10 [ 29.499070] i915 device info: pciid=0x0a16 rev=0x0b platform=HASWELL gen=7 [ 29.499078] [drm:drm_setup_crtcs [drm_kms_helper]] [ 29.499079] i915 device info: is_mobile: no [ 29.499084] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:eDP-1] [ 29.499085] i915 device info: is_lp: no [ 29.499086] i915 device info: is_alpha_support: no [ 29.499120] [drm:intel_dp_detect [i915]] [CONNECTOR:65:eDP-1] [ 29.499121] i915 device info: has_64bit_reloc: no [ 29.499122] i915 device info: has_aliasing_ppgtt: yes [ 29.499155] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 29.499156] i915 device info: has_csr: no [ 29.499198] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 29.499216] i915 device info: has_ddi: yes [ 29.499217] i915 device info: has_dp_mst: yes [ 29.499219] i915 device info: has_reset_engine: no [ 29.499220] i915 device info: has_fbc: yes [ 29.499221] i915 device info: has_fpga_dbg: yes [ 29.499222] i915 device info: has_full_ppgtt: yes [ 29.499273] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 29.499274] i915 device info: has_full_48bit_ppgtt: no [ 29.499275] i915 device info: has_gmch_display: no [ 29.499276] i915 device info: has_guc: no [ 29.499277] i915 device info: has_guc_ct: no [ 29.499278] i915 device info: has_hotplug: yes [ 29.499279] i915 device info: has_l3_dpf: yes [ 29.499280] i915 device info: has_llc: yes [ 29.499292] i915 device info: has_logical_ring_contexts: no [ 29.499294] i915 device info: has_logical_ring_elsq: no [ 29.499295] i915 device info: has_logical_ring_preemption: no [ 29.499296] i915 device info: has_overlay: no [ 29.499297] i915 device info: has_pooled_eu: no [ 29.499298] i915 device info: has_psr: yes [ 29.499299] i915 device info: has_rc6: yes [ 29.499300] i915 device info: has_rc6p: no [ 29.499301] i915 device info: has_resource_streamer: yes [ 29.499302] i915 device info: has_runtime_pm: yes [ 29.499303] i915 device info: has_snoop: no [ 29.499304] i915 device info: unfenced_needs_alignment: no [ 29.499305] i915 device info: cursor_needs_physical: no [ 29.499306] i915 device info: hws_needs_physical: no [ 29.499308] i915 device info: overlay_needs_physical: no [ 29.499309] i915 device info: supports_tv: no [ 29.499310] i915 device info: has_ipc: no [ 29.499311] i915 device info: slice total: 1, mask=0001 [ 29.499312] i915 device info: subslice total: 2 [ 29.499314] i915 device info: slice0: 2 subslices, mask=0003 [ 29.499315] i915 device info: EU total: 20 [ 29.499316] i915 device info: EU per subslice: 10 [ 29.499317] i915 device info: has slice power gating: no [ 29.499318] i915 device info: has subslice power gating: no [ 29.499319] i915 device info: has EU power gating: no [ 29.499320] i915 device info: CS timestamp frequency: 12500 kHz [ 29.499824] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 29.500516] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:eDP-1] status updated from unknown to connected [ 29.500539] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 29.500549] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 29.500557] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 29.500580] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:eDP-1] probed modes : [ 29.500589] [drm:drm_mode_debug_printmodeline [drm]] Modeline 66:"1366x768" 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 29.500597] [drm:drm_mode_debug_printmodeline [drm]] Modeline 67:"1366x768" 48 61040 1366 1374 1384 1558 768 771 772 816 0x40 0x9 [ 29.500601] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] [ 29.500626] [drm:intel_hdmi_detect [i915]] [CONNECTOR:73:HDMI-A-1] [ 29.500823] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 29.500845] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 29.501040] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 29.501049] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 29.501071] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 29.501094] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 29.501769] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 29.501791] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 29.501972] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 29.501994] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 29.502174] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 29.502180] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 29.502184] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] status updated from unknown to disconnected [ 29.502189] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] disconnected [ 29.502194] [drm:drm_setup_crtcs [drm_kms_helper]] connector 65 enabled? yes [ 29.502199] [drm:drm_setup_crtcs [drm_kms_helper]] connector 73 enabled? no [ 29.502226] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 29.502231] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 65 [ 29.502235] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 65 0 [ 29.502239] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1366x768 [ 29.502243] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 8192x8192 config [ 29.502248] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1366x768 set on crtc 39 (0,0) [ 29.502272] [drm:intelfb_create [i915]] re-using BIOS fb [ 29.502299] [drm:intelfb_create [i915]] allocated 1366x768 fb: 0x00000000 [ 29.502343] fbcon: inteldrmfb (fb0) is primary device [ 29.502390] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000f1baa189 [ 29.502400] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:28:primary A] 000000002a68d632 state to 00000000f1baa189 [ 29.502410] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:39:pipe A] 00000000b22c0f26 state to 00000000f1baa189 [ 29.502419] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:sprite A] 00000000a2fca61f state to 00000000f1baa189 [ 29.502428] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:31:sprite A] state 00000000a2fca61f [ 29.502437] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:36:cursor A] 00000000a3d3106d state to 00000000f1baa189 [ 29.502445] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:36:cursor A] state 00000000a3d3106d [ 29.502454] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:40:primary B] 00000000f801ac6c state to 00000000f1baa189 [ 29.502463] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:43:sprite B] 000000003e6cfe1b state to 00000000f1baa189 [ 29.502471] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:43:sprite B] state 000000003e6cfe1b [ 29.502480] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:48:cursor B] 00000000e7fbfcba state to 00000000f1baa189 [ 29.502488] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:48:cursor B] state 00000000e7fbfcba [ 29.502498] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:primary C] 0000000013c00262 state to 00000000f1baa189 [ 29.502514] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:55:sprite C] 0000000062a2f9a6 state to 00000000f1baa189 [ 29.502522] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:55:sprite C] state 0000000062a2f9a6 [ 29.502531] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:cursor C] 000000004b3595b3 state to 00000000f1baa189 [ 29.502539] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:cursor C] state 000000004b3595b3 [ 29.502549] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [MODE:1366x768] for [CRTC:39:pipe A] state 00000000b22c0f26 [ 29.502557] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:79] for [PLANE:28:primary A] state 000000002a68d632 [ 29.502566] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:39:pipe A] to 00000000f1baa189 [ 29.502575] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:65:eDP-1] 0000000084571456 state to 00000000f1baa189 [ 29.502584] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:65:eDP-1] state 0000000084571456 to [NOCRTC] [ 29.502592] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:65:eDP-1] state 0000000084571456 to [CRTC:39:pipe A] [ 29.502602] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe B] 000000008675ad19 state to 00000000f1baa189 [ 29.502610] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:51:pipe B] state 000000008675ad19 [ 29.502618] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:40:primary B] state 00000000f801ac6c [ 29.502626] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe B] to 00000000f1baa189 [ 29.502636] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:63:pipe C] 00000000400223af state to 00000000f1baa189 [ 29.502644] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:63:pipe C] state 00000000400223af [ 29.502652] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:primary C] state 0000000013c00262 [ 29.502661] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:63:pipe C] to 00000000f1baa189 [ 29.502669] [drm:drm_atomic_check_only [drm]] checking 00000000f1baa189 [ 29.502675] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:39:pipe A] mode changed [ 29.502681] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1] [ 29.502685] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 29.502690] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:39:pipe A] needs all connectors, enable: y, active: y [ 29.502699] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:39:pipe A] to 00000000f1baa189 [ 29.502707] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:39:pipe A] to 00000000f1baa189 [ 29.502739] [drm:intel_atomic_check [i915]] [CONNECTOR:65:eDP-1] checking for sink bpp constrains [ 29.502766] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 18 [ 29.502796] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 18 pixel clock 76300KHz [ 29.502822] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 29.502845] [drm:intel_dp_compute_config [i915]] DP link rate required 171675 available 270000 [ 29.502873] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 29.502902] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe A][fastset] [ 29.502926] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100) [ 29.502949] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 29.502980] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 5347087, gmch_n: 8388608, link_m: 148530, link_n: 524288, tu: 64 [ 29.502999] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 29.503019] [drm:intel_dump_pipe_config [i915]] requested mode: [ 29.503029] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 29.503048] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 29.503057] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 29.503077] [drm:intel_dump_pipe_config [i915]] crtc timings: 76300 1366 1374 1384 1558 768 771 772 816, type: 0x48 flags: 0x9 [ 29.503097] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1366x768, pixel rate 76300 [ 29.503115] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 29.503134] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 29.503152] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000 [ 29.503170] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 29.503190] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] FB:79, fb = 1366x768 format = XR24 little-endian (0x34325258) [ 29.503209] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = 0 [ 29.503227] [drm:intel_dump_pipe_config [i915]] [PLANE:36:cursor A] disabled, scaler_id = 0 [ 29.503253] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 79 [ 29.503275] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 29.503287] [drm:drm_atomic_commit [drm]] committing 00000000f1baa189 [ 29.521122] [drm:verify_connector_state.isra.87 [i915]] [CONNECTOR:65:eDP-1] [ 29.521171] [drm:intel_atomic_commit_tail [i915]] [CRTC:39:pipe A] [ 29.521221] [drm:verify_single_dpll_state.isra.48 [i915]] SPLL [ 29.521229] Console: switching to colour frame buffer device 170x48 [ 29.521254] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000e5412e3d [ 29.521268] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:28:primary A] 0000000032011370 state to 00000000e5412e3d [ 29.521283] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:39:pipe A] 000000001f27b229 state to 00000000e5412e3d [ 29.521296] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:sprite A] 000000009bc37185 state to 00000000e5412e3d [ 29.521309] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:31:sprite A] state 000000009bc37185 [ 29.521323] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:36:cursor A] 00000000e0de581f state to 00000000e5412e3d [ 29.521336] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:36:cursor A] state 00000000e0de581f [ 29.521349] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:40:primary B] 00000000f4a48826 state to 00000000e5412e3d [ 29.521362] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:43:sprite B] 00000000f89cf520 state to 00000000e5412e3d [ 29.521375] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:43:sprite B] state 00000000f89cf520 [ 29.521388] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:48:cursor B] 000000008768599a state to 00000000e5412e3d [ 29.521400] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:48:cursor B] state 000000008768599a [ 29.521413] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:primary C] 000000004162cb93 state to 00000000e5412e3d [ 29.521428] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:55:sprite C] 0000000043f68d7e state to 00000000e5412e3d [ 29.521441] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:55:sprite C] state 0000000043f68d7e [ 29.521453] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:cursor C] 00000000453eddab state to 00000000e5412e3d [ 29.521466] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:cursor C] state 00000000453eddab [ 29.521480] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [MODE:1366x768] for [CRTC:39:pipe A] state 000000001f27b229 [ 29.521493] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:79] for [PLANE:28:primary A] state 0000000032011370 [ 29.521506] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:39:pipe A] to 00000000e5412e3d [ 29.521520] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:65:eDP-1] 000000005e9a0779 state to 00000000e5412e3d [ 29.521533] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:65:eDP-1] state 000000005e9a0779 to [NOCRTC] [ 29.521546] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:65:eDP-1] state 000000005e9a0779 to [CRTC:39:pipe A] [ 29.521560] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe B] 000000004362c662 state to 00000000e5412e3d [ 29.521572] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:51:pipe B] state 000000004362c662 [ 29.521585] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:40:primary B] state 00000000f4a48826 [ 29.521598] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe B] to 00000000e5412e3d [ 29.521611] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:63:pipe C] 0000000016f568e6 state to 00000000e5412e3d [ 29.521623] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:63:pipe C] state 0000000016f568e6 [ 29.521636] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:primary C] state 000000004162cb93 [ 29.521648] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:63:pipe C] to 00000000e5412e3d [ 29.521661] [drm:drm_atomic_check_only [drm]] checking 00000000e5412e3d [ 29.521670] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1] [ 29.521678] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 29.521724] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 79 [ 29.521764] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 29.521782] [drm:drm_atomic_commit [drm]] committing 00000000e5412e3d [ 29.521819] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000f1baa189 [ 29.521834] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000f1baa189 [ 29.528053] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000e5412e3d [ 29.528071] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000e5412e3d [ 29.530258] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 29.545959] [drm:drm_fb_helper_hotplug_event.part.29 [drm_kms_helper]] [ 29.545967] [drm:drm_setup_crtcs [drm_kms_helper]] [ 29.545979] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:eDP-1] [ 29.546025] [drm:intel_dp_detect [i915]] [CONNECTOR:65:eDP-1] [ 29.546072] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 29.546114] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 29.546156] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 29.546723] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 29.547384] MARK: loaded i915 [ 29.547435] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 29.547453] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 29.547468] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 29.547509] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:eDP-1] probed modes : [ 29.547526] [drm:drm_mode_debug_printmodeline [drm]] Modeline 66:"1366x768" 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 29.547542] [drm:drm_mode_debug_printmodeline [drm]] Modeline 67:"1366x768" 48 61040 1366 1374 1384 1558 768 771 772 816 0x40 0x9 [ 29.547549] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] [ 29.547587] [drm:intel_hdmi_detect [i915]] [CONNECTOR:73:HDMI-A-1] [ 29.547792] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 29.547828] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 29.548028] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 29.548044] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 29.548079] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 29.548113] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 29.548816] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 29.548852] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 29.549051] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 29.549085] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 29.549285] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 29.549295] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 29.549303] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] disconnected [ 29.549311] [drm:drm_setup_crtcs [drm_kms_helper]] connector 65 enabled? yes [ 29.549319] [drm:drm_setup_crtcs [drm_kms_helper]] connector 73 enabled? no [ 29.549354] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 29.549363] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 65 [ 29.549371] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 65 0 [ 29.549377] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1366x768 [ 29.549385] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1366x768 config [ 29.549394] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1366x768 set on crtc 39 (0,0) [ 29.549413] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000e5412e3d [ 29.549430] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:28:primary A] 000000006df75556 state to 00000000e5412e3d [ 29.549446] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:39:pipe A] 00000000400223af state to 00000000e5412e3d [ 29.549463] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:sprite A] 000000000bc3fa87 state to 00000000e5412e3d [ 29.549478] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:31:sprite A] state 000000000bc3fa87 [ 29.549494] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:36:cursor A] 0000000095da0682 state to 00000000e5412e3d [ 29.549510] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:36:cursor A] state 0000000095da0682 [ 29.549525] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:40:primary B] 0000000047a89915 state to 00000000e5412e3d [ 29.549541] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:43:sprite B] 00000000fa519a17 state to 00000000e5412e3d [ 29.549556] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:43:sprite B] state 00000000fa519a17 [ 29.549570] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:48:cursor B] 00000000a6c6ea15 state to 00000000e5412e3d [ 29.549585] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:48:cursor B] state 00000000a6c6ea15 [ 29.549600] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:primary C] 000000007fb0915d state to 00000000e5412e3d [ 29.549615] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:55:sprite C] 000000008b37bd87 state to 00000000e5412e3d [ 29.549630] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:55:sprite C] state 000000008b37bd87 [ 29.549645] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:cursor C] 000000001d5971de state to 00000000e5412e3d [ 29.549660] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:cursor C] state 000000001d5971de [ 29.549677] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [MODE:1366x768] for [CRTC:39:pipe A] state 00000000400223af [ 29.549692] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:79] for [PLANE:28:primary A] state 000000006df75556 [ 29.549707] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:39:pipe A] to 00000000e5412e3d [ 29.549723] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:65:eDP-1] 00000000f33779f6 state to 00000000e5412e3d [ 29.549738] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:65:eDP-1] state 00000000f33779f6 to [NOCRTC] [ 29.549754] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:65:eDP-1] state 00000000f33779f6 to [CRTC:39:pipe A] [ 29.549769] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe B] 000000008675ad19 state to 00000000e5412e3d [ 29.549784] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:51:pipe B] state 000000008675ad19 [ 29.549799] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:40:primary B] state 0000000047a89915 [ 29.549814] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe B] to 00000000e5412e3d [ 29.549831] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:63:pipe C] 00000000b22c0f26 state to 00000000e5412e3d [ 29.549845] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:63:pipe C] state 00000000b22c0f26 [ 29.549860] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:primary C] state 000000007fb0915d [ 29.549875] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:63:pipe C] to 00000000e5412e3d [ 29.549889] [drm:drm_atomic_check_only [drm]] checking 00000000e5412e3d [ 29.549900] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1] [ 29.549909] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 29.549949] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 79 [ 29.549985] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 29.550006] [drm:drm_atomic_commit [drm]] committing 00000000e5412e3d [ 29.551764] [drm:drm_fb_helper_hotplug_event.part.29 [drm_kms_helper]] [ 29.551771] [drm:drm_setup_crtcs [drm_kms_helper]] [ 29.551779] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:eDP-1] [ 29.551815] [drm:intel_dp_detect [i915]] [CONNECTOR:65:eDP-1] [ 29.551851] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 29.551885] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 29.551919] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 29.551954] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000e5412e3d [ 29.551979] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000e5412e3d [ 29.552484] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 29.553198] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 29.553216] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 29.553230] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 29.553267] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:eDP-1] probed modes : [ 29.553283] [drm:drm_mode_debug_printmodeline [drm]] Modeline 66:"1366x768" 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 29.553299] [drm:drm_mode_debug_printmodeline [drm]] Modeline 67:"1366x768" 48 61040 1366 1374 1384 1558 768 771 772 816 0x40 0x9 [ 29.553306] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] [ 29.553342] [drm:intel_hdmi_detect [i915]] [CONNECTOR:73:HDMI-A-1] [ 29.553545] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 29.553580] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 29.553779] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 29.553795] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 29.553830] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 29.553864] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 29.554568] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 29.554603] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 29.554802] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 29.554836] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 29.555034] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 29.555043] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 29.555051] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] disconnected [ 29.555059] [drm:drm_setup_crtcs [drm_kms_helper]] connector 65 enabled? yes [ 29.555067] [drm:drm_setup_crtcs [drm_kms_helper]] connector 73 enabled? no [ 29.555101] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 29.555110] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 65 [ 29.555117] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 65 0 [ 29.555124] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1366x768 [ 29.555131] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1366x768 config [ 29.555140] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1366x768 set on crtc 39 (0,0) [ 29.555159] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000e5412e3d [ 29.555175] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:28:primary A] 0000000043f68d7e state to 00000000e5412e3d [ 29.555192] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:39:pipe A] 0000000016f568e6 state to 00000000e5412e3d [ 29.555208] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:sprite A] 00000000e9e508a1 state to 00000000e5412e3d [ 29.555223] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:31:sprite A] state 00000000e9e508a1 [ 29.555239] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:36:cursor A] 00000000630a830c state to 00000000e5412e3d [ 29.555254] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:36:cursor A] state 00000000630a830c [ 29.555269] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:40:primary B] 000000006d84db76 state to 00000000e5412e3d [ 29.555285] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:43:sprite B] 0000000046107b17 state to 00000000e5412e3d [ 29.555300] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:43:sprite B] state 0000000046107b17 [ 29.555315] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:48:cursor B] 00000000142f33d7 state to 00000000e5412e3d [ 29.555330] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:48:cursor B] state 00000000142f33d7 [ 29.555345] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:primary C] 0000000073b41f73 state to 00000000e5412e3d [ 29.555360] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:55:sprite C] 0000000074ed8f40 state to 00000000e5412e3d [ 29.555375] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:55:sprite C] state 0000000074ed8f40 [ 29.555390] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:cursor C] 0000000094d8511e state to 00000000e5412e3d [ 29.555404] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:cursor C] state 0000000094d8511e [ 29.555421] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [MODE:1366x768] for [CRTC:39:pipe A] state 0000000016f568e6 [ 29.555436] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:79] for [PLANE:28:primary A] state 0000000043f68d7e [ 29.555451] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:39:pipe A] to 00000000e5412e3d [ 29.555467] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:65:eDP-1] 000000005e9a0779 state to 00000000e5412e3d [ 29.555483] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:65:eDP-1] state 000000005e9a0779 to [NOCRTC] [ 29.555498] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:65:eDP-1] state 000000005e9a0779 to [CRTC:39:pipe A] [ 29.555513] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe B] 000000004362c662 state to 00000000e5412e3d [ 29.555528] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:51:pipe B] state 000000004362c662 [ 29.555542] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:40:primary B] state 000000006d84db76 [ 29.555556] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe B] to 00000000e5412e3d [ 29.555572] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:63:pipe C] 000000001f27b229 state to 00000000e5412e3d [ 29.555586] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:63:pipe C] state 000000001f27b229 [ 29.555601] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:primary C] state 0000000073b41f73 [ 29.555616] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:63:pipe C] to 00000000e5412e3d [ 29.555631] [drm:drm_atomic_check_only [drm]] checking 00000000e5412e3d [ 29.555640] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1] [ 29.555649] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] keeps [ENCODER:64:DDI A], now on [CRTC:39:pipe A] [ 29.555688] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:39:pipe A] has [PLANE:28:primary A] with fb 79 [ 29.555725] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:28:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 29.555744] [drm:drm_atomic_commit [drm]] committing 00000000e5412e3d [ 29.559710] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000e5412e3d [ 29.559728] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000e5412e3d [ 29.692877] [drm:ilk_hpd_irq_handler [i915]] hotplug event received, stat 0x08000000, dig 0x00000011, pins 0x00000010, long 0x00000000 [ 29.692944] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - short [ 29.693053] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port A - short [ 29.693813] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 81 41 00 00 01 00 02 00 00 00 00 00 00 [ 29.694247] [drm:i915_hotplug_work_func [i915]] running encoder hotplug functions [ 29.694295] [drm:i915_hotplug_work_func [i915]] Connector eDP-1 (pin 4) received hotplug event. [ 29.694344] [drm:intel_dp_detect [i915]] [CONNECTOR:65:eDP-1] [ 29.694391] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 29.694437] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 29.694483] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 29.695117] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 32.756067] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off [ 32.756175] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007 [ 44.580423] MARK: poweroff