<6> [308.341968] Console: switching to colour dummy device 80x25 <6> [308.342105] [IGT] drv_module_reload: executing <6> [308.348784] [IGT] drv_module_reload: starting subtest basic-reload <6> [308.501567] snd_hda_intel 0000:00:1b.0: Dropping the link to 0000:00:02.0 <7> [308.635869] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on <7> [308.635980] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f <7> [308.636064] [drm:intel_edp_backlight_off [i915]] <7> [308.845414] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 <7> [308.846246] [drm:edp_panel_off [i915]] Turn eDP port A panel power off <7> [308.846329] [drm:edp_panel_off [i915]] Wait for panel power off time <7> [308.846418] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control abcd0000 <7> [308.847339] [drm:ilk_hpd_irq_handler [i915]] hotplug event received, stat 0x00080000, dig 0x00000011, pins 0x00000010, long 0x00000000 <7> [308.847443] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - short <7> [308.847625] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port A - short <7> [308.898131] [drm:wait_panel_status [i915]] Wait complete <7> [308.898530] [drm:intel_disable_pipe [i915]] disabling pipe A <7> [308.898614] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on <7> [308.898694] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle <7> [308.904794] [drm:intel_dp_link_down.isra.18 [i915]] <7> [308.956328] [drm:g4x_post_disable_dp [i915]] disabling eDP PLL <7> [308.956638] [drm:intel_atomic_commit_tail [i915]] [ENCODER:53:CRT] <7> [308.956721] [drm:intel_atomic_commit_tail [i915]] [ENCODER:54:DP A] <7> [308.956808] [drm:intel_atomic_commit_tail [i915]] [ENCODER:63:HDMI B] <7> [308.956890] [drm:intel_atomic_commit_tail [i915]] [ENCODER:69:DP B] <7> [308.956973] [drm:intel_atomic_commit_tail [i915]] [ENCODER:72:HDMI C] <7> [308.957055] [drm:intel_atomic_commit_tail [i915]] [ENCODER:75:HDMI D] <7> [308.957229] [drm:intel_atomic_commit_tail [i915]] [ENCODER:78:DP C] <7> [308.957365] [drm:intel_atomic_commit_tail [i915]] [ENCODER:81:DP D] <7> [308.957500] [drm:verify_connector_state.isra.70 [i915]] [CONNECTOR:55:eDP-1] <7> [308.957611] [drm:verify_single_dpll_state.isra.100 [i915]] PCH DPLL A <7> [308.957728] [drm:verify_single_dpll_state.isra.100 [i915]] PCH DPLL B <7> [308.958112] [drm:intel_atomic_commit_tail [i915]] [CRTC:39:pipe A] <7> [309.501336] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control abcd0000 <7> [309.501425] [drm:wait_panel_status [i915]] Wait complete <7> [309.501515] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 <7> [309.501599] [drm:edp_panel_vdd_on [i915]] eDP port A panel power wasn't enabled <7> [309.733293] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 81 01 01 00 01 00 02 00 00 00 00 07 00 <7> [309.787512] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off <7> [309.787604] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000 <7> [310.418905] [drm:intel_pch_type [i915]] Found Ibex Peak PCH <7> [310.418953] [drm:i915_driver_load [i915]] WOPCM size: 1024KiB <7> [310.419013] [drm:intel_uc_init_early [i915]] enable_guc=0 (submission:no huc:no) <7> [310.419069] [drm:intel_uc_init_early [i915]] guc_log_level=0 (enabled:no, verbose:no, verbosity:0) <7> [310.419508] [drm:intel_power_domains_init [i915]] Allowed DC state mask 00 <6> [310.419834] pci 0000:00:00.0: Intel HD Graphics Chipset <6> [310.419895] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable <6> [310.420386] pci 0000:00:00.0: detected 32768K stolen memory <7> [310.420573] [drm:i915_ggtt_probe_hw [i915]] GGTT size = 2048M <7> [310.420637] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [310.420699] [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [310.420728] [drm] Replacing VGA console driver <7> [310.421323] [drm:i915_gem_init_stolen [i915]] ELK_STOLEN_RESERVED = 00000002 <7> [310.421394] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 32768K <7> [310.423950] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params <7> [310.424032] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xbb73e018 <7> [310.424195] [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [310.424275] [drm:intel_opregion_setup [i915]] SWSCI supported <7> [310.434226] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 000000b3, SBCB callbacks 00000081 <7> [310.434301] [drm:intel_opregion_setup [i915]] ASLE supported <7> [310.434375] [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [310.434448] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <6> [310.434472] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). <6> [310.434475] [drm] Driver supports precise vblank timestamp query. <7> [310.434550] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [310.434627] [drm:intel_bios_init [i915]] VBT signature "$VBT IRONLAKE-MOBILE", BDB version 161 <7> [310.434697] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 <7> [310.434754] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [310.438295] [drm:intel_opregion_get_panel_type [i915]] No panel type in OpRegion <7> [310.438388] [drm:intel_bios_init [i915]] Panel type: 13 (VBT) <7> [310.438480] [drm:intel_bios_init [i915]] DRRS supported mode is seamless <7> [310.438596] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables: <7> [310.438608] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 0 107800 1600 1648 1680 1920 900 903 908 936 0x8 0xa <7> [310.438704] [drm:intel_bios_init [i915]] VBT initial LVDS value 20033c <7> [310.438801] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 1500 Hz, active high, min brightness 0, level 0, controller 0 <7> [310.438905] [drm:intel_bios_init [i915]] Found SDVO panel mode in BIOS VBT tables: <7> [310.438914] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa <7> [310.439008] [drm:intel_bios_init [i915]] DRRS State Enabled:1 <7> [310.439101] [drm:intel_bios_init [i915]] No PSR BDB found. <7> [310.439882] [drm:intel_bios_init [i915]] No SDVO device info is found in VBT <7> [310.440258] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [310.440356] [drm:i915_driver_load [i915]] rawclk rate: 125000 kHz <7> [310.440779] [drm:intel_power_well_enable [i915]] enabling always-on <7> [310.444504] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 <7> [310.444564] [drm:intel_print_wm_latency [i915]] Primary WM0 latency 7 (0.7 usec) <7> [310.444617] [drm:intel_print_wm_latency [i915]] Primary WM1 latency 10 (5.0 usec) <7> [310.444669] [drm:intel_print_wm_latency [i915]] Primary WM2 latency 34 (17.0 usec) <7> [310.444737] [drm:intel_print_wm_latency [i915]] Sprite WM0 latency 13 (1.3 usec) <7> [310.444812] [drm:intel_print_wm_latency [i915]] Sprite WM1 latency 10 (5.0 usec) <7> [310.444885] [drm:intel_print_wm_latency [i915]] Sprite WM2 latency 34 (17.0 usec) <7> [310.444939] [drm:intel_print_wm_latency [i915]] Cursor WM0 latency 13 (1.3 usec) <7> [310.444992] [drm:intel_print_wm_latency [i915]] Cursor WM1 latency 10 (5.0 usec) <7> [310.445045] [drm:intel_print_wm_latency [i915]] Cursor WM2 latency 34 (17.0 usec) <7> [310.445183] [drm:intel_modeset_init [i915]] 2 display pipes available. <7> [310.446058] [drm:intel_modeset_init [i915]] FDI PLL freq=270000 <7> [310.446210] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 450000 kHz, VCO 0 kHz, ref 0 kHz, bypass 0 kHz, voltage level 0 <7> [310.446299] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 450000 kHz <7> [310.446365] [drm:intel_modeset_init [i915]] Max dotclock rate: 405000 kHz <7> [310.446745] [drm:intel_lvds_init [i915]] Internal LVDS support disabled by VBT <7> [310.446862] [drm:intel_crt_reset [i915]] crt adpa set to 0x40f40000 <7> [310.446964] [drm:intel_aux_ch [i915]] using AUX A for port A (platform default) <7> [310.447059] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port A <7> [310.447392] [drm:intel_pps_dump_state [i915]] cur t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [310.447510] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [310.447602] [drm:intel_dp_init_panel_power_sequencer [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [310.447694] [drm:intel_dp_init_panel_power_sequencer [i915]] backlight on delay 1, off delay 200 <7> [310.447792] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x186906 <7> [310.448009] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on <7> [310.448128] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle <7> [311.101528] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control abcd0000 <7> [311.101672] [drm:wait_panel_status [i915]] Wait complete <7> [311.101785] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 <7> [311.101892] [drm:edp_panel_vdd_on [i915]] eDP port A panel power wasn't enabled <7> [311.310867] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 81 01 01 00 01 00 02 00 00 00 00 07 00 <7> [311.312163] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [311.313356] [drm:intel_dp_init_connector [i915]] eDP DPCD: 00 00 00 <7> [311.323990] [drm:drm_add_edid_modes] ELD: no CEA Extension found <7> [311.324002] [drm:drm_add_display_info] non_desktop set to 0 <7> [311.324119] [drm:drm_add_display_info] non_desktop set to 0 <7> [311.324304] [drm:intel_dp_init_connector [i915]] DRRS supported for Gen7 and above <7> [311.324517] [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, disabled, brightness 0/648 <7> [311.324836] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [311.326507] [drm:intel_sdvo_read_byte [i915]] i2c transfer returned -6 <7> [311.326605] [drm:intel_sdvo_init [i915]] No SDVO device found on SDVOB <7> [311.327247] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [311.327456] [drm:intel_aux_ch [i915]] using AUX B for port B (platform default) <7> [311.327556] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B <7> [311.327705] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (platform default) <7> [311.327994] [drm:intel_aux_ch [i915]] using AUX B for port B (platform default) <7> [311.328099] [drm:intel_dp_init_connector [i915]] Adding DP connector on port B <7> [311.328397] [drm:intel_aux_ch [i915]] using AUX C for port C (platform default) <7> [311.328535] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C <7> [311.328686] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (platform default) <7> [311.328838] [drm:intel_aux_ch [i915]] using AUX D for port D (platform default) <7> [311.328928] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port D <7> [311.329034] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x6 for port D (platform default) <7> [311.329282] [drm:intel_aux_ch [i915]] using AUX C for port C (platform default) <7> [311.329417] [drm:intel_dp_init_connector [i915]] Adding DP connector on port C <7> [311.329673] [drm:intel_aux_ch [i915]] using AUX D for port D (platform default) <7> [311.329811] [drm:intel_dp_init_connector [i915]] Adding DP connector on port D <7> [311.330012] [drm:intel_init_pch_refclk [i915]] has_panel 1 has_lvds 0 has_ck505 0 using_ssc_source 0 <7> [311.330286] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:39:pipe A] hw state readout: disabled <7> [311.330423] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe B] hw state readout: disabled <7> [311.330562] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:28:primary A] hw state readout: disabled, pipe A <7> [311.330697] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:sprite A] hw state readout: disabled, pipe A <7> [311.330832] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:36:cursor A] hw state readout: disabled, pipe A <7> [311.330965] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:primary B] hw state readout: disabled, pipe B <7> [311.331101] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:sprite B] hw state readout: disabled, pipe B <7> [311.331284] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:48:cursor B] hw state readout: disabled, pipe B <7> [311.331432] [drm:intel_modeset_setup_hw_state [i915]] PCH DPLL A hw state readout: crtc_mask 0x00000000, on 0 <7> [311.331571] [drm:intel_modeset_setup_hw_state [i915]] PCH DPLL B hw state readout: crtc_mask 0x00000000, on 0 <7> [311.331709] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:53:CRT] hw state readout: disabled, pipe B <7> [311.331847] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:54:DP A] hw state readout: disabled, pipe A <7> [311.331983] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:63:HDMI B] hw state readout: disabled, pipe A <7> [311.332121] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:69:DP B] hw state readout: disabled, pipe A <7> [311.332307] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:72:HDMI C] hw state readout: disabled, pipe A <7> [311.332435] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:75:HDMI D] hw state readout: disabled, pipe A <7> [311.332567] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:78:DP C] hw state readout: disabled, pipe A <7> [311.332704] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:81:DP D] hw state readout: disabled, pipe A <7> [311.332863] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:55:eDP-1] hw state readout: disabled <7> [311.333002] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:52:VGA-1] hw state readout: disabled <7> [311.333141] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:64:HDMI-A-1] hw state readout: disabled <7> [311.333322] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:70:DP-1] hw state readout: disabled <7> [311.333452] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:73:HDMI-A-2] hw state readout: disabled <7> [311.333584] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:76:HDMI-A-3] hw state readout: disabled <7> [311.333725] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:79:DP-2] hw state readout: disabled <7> [311.333863] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:82:DP-3] hw state readout: disabled <7> [311.334002] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe A][setup_hw_state] <7> [311.334132] [drm:intel_dump_pipe_config [i915]] output_types: (0x0) <7> [311.334302] [drm:intel_dump_pipe_config [i915]] output format: RGB <7> [311.334404] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 0, dithering: 0 <7> [311.334505] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 <7> [311.334607] [drm:intel_dump_pipe_config [i915]] requested mode: <7> [311.334621] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 <7> [311.334719] [drm:intel_dump_pipe_config [i915]] adjusted mode: <7> [311.334730] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 <7> [311.334827] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 <7> [311.334926] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 <7> [311.335025] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled <7> [311.335124] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 <7> [311.335311] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 <7> [311.335390] [drm:intel_dump_pipe_config [i915]] planes on this crtc <7> [311.335471] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] disabled, scaler_id = -1 <7> [311.335551] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = -1 <7> [311.335632] [drm:intel_dump_pipe_config [i915]] [PLANE:36:cursor A] disabled, scaler_id = -1 <7> [311.335713] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe B][setup_hw_state] <7> [311.335794] [drm:intel_dump_pipe_config [i915]] output_types: (0x0) <7> [311.335873] [drm:intel_dump_pipe_config [i915]] output format: RGB <7> [311.335952] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0 <7> [311.336028] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 <7> [311.336106] [drm:intel_dump_pipe_config [i915]] requested mode: <7> [311.336146] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 <7> [311.336226] [drm:intel_dump_pipe_config [i915]] adjusted mode: <7> [311.336237] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 <7> [311.336318] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 <7> [311.336401] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 <7> [311.336486] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled <7> [311.336565] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 <7> [311.336645] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 <7> [311.336727] [drm:intel_dump_pipe_config [i915]] planes on this crtc <7> [311.336807] [drm:intel_dump_pipe_config [i915]] [PLANE:40:primary B] disabled, scaler_id = -1 <7> [311.336874] [drm:intel_dump_pipe_config [i915]] [PLANE:43:sprite B] disabled, scaler_id = -1 <7> [311.336933] [drm:intel_dump_pipe_config [i915]] [PLANE:48:cursor B] disabled, scaler_id = -1 <7> [311.339022] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [1000, 80000000] <7> [311.349421] [drm:intel_ctx_workarounds_init [i915]] Number of context specific w/a: 0 <7> [311.349774] [drm:i915_gem_contexts_init [i915]] fake context support initialized <6> [311.351629] [drm] RC6 disabled, disabling runtime PM support <7> [311.352045] [drm:intel_enable_gt_powersave [i915]] fmax: 0, fmin: 10, fstart: 8 <7> [311.354267] [drm:intel_fbdev_init [i915]] pipe A not active or no fb, skipping <7> [311.354324] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping <7> [311.354379] [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [311.365438] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered <7> [311.365606] [drm:intel_dp_connector_register [i915]] registering DPDDC-A bus for card0-eDP-1 <7> [311.368899] [drm:intel_dp_connector_register [i915]] registering DPDDC-B bus for card0-DP-1 <7> [311.374658] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-DP-2 <7> [311.376721] [drm:intel_dp_connector_register [i915]] registering DPDDC-D bus for card0-DP-3 <6> [311.377710] [drm] Initialized i915 1.6.0 20181102 for 0000:00:02.0 on minor 0 <7> [311.380339] [drm:intel_opregion_resume [i915]] 8 outputs detected <6> [311.388739] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) <7> [311.399977] [drm:asle_work [i915]] bclp = 0x8000000e <7> [311.400111] [drm:asle_work [i915]] updating opregion backlight 14/255 <7> [311.409319] [drm:asle_work [i915]] bclp = 0x800000ea <7> [311.409407] [drm:asle_work [i915]] updating opregion backlight 234/255 <6> [311.411300] acpi device:0d: registered as cooling_device4 <6> [311.414164] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input36 <7> [311.415789] i915 device info: pciid=0x0046 rev=0x12 platform=IRONLAKE gen=5 <7> [311.415794] i915 device info: is_mobile: yes <7> [311.415797] i915 device info: is_lp: no <7> [311.415801] i915 device info: is_alpha_support: no <7> [311.415805] i915 device info: has_64bit_reloc: no <7> [311.415808] i915 device info: has_csr: no <7> [311.415811] i915 device info: has_ddi: no <7> [311.415815] i915 device info: has_dp_mst: no <7> [311.415818] i915 device info: has_reset_engine: no <7> [311.415822] i915 device info: has_fbc: yes <7> [311.415825] i915 device info: has_fpga_dbg: no <7> [311.415829] i915 device info: has_gmch_display: no <7> [311.415832] i915 device info: has_guc: no <7> [311.415835] i915 device info: has_guc_ct: no <7> [311.415839] i915 device info: has_hotplug: yes <7> [311.415842] i915 device info: has_l3_dpf: no <7> [311.415846] i915 device info: has_llc: no <7> [311.415849] i915 device info: has_logical_ring_contexts: no <7> [311.415853] i915 device info: has_logical_ring_elsq: no <7> [311.415856] i915 device info: has_logical_ring_preemption: no <7> [311.415860] i915 device info: has_overlay: no <7> [311.415863] i915 device info: has_pooled_eu: no <7> [311.415866] i915 device info: has_psr: no <7> [311.415870] i915 device info: has_rc6: no <7> [311.415873] i915 device info: has_rc6p: no <7> [311.415877] i915 device info: has_runtime_pm: no <7> [311.415880] i915 device info: has_snoop: yes <7> [311.415884] i915 device info: has_coherent_ggtt: yes <7> [311.415887] i915 device info: unfenced_needs_alignment: no <7> [311.415891] i915 device info: cursor_needs_physical: no <7> [311.415894] i915 device info: hws_needs_physical: no <7> [311.415897] i915 device info: overlay_needs_physical: no <7> [311.415901] i915 device info: supports_tv: no <7> [311.415905] i915 device info: has_ipc: no <7> [311.415908] i915 device info: slice total: 0, mask=0000 <7> [311.415912] i915 device info: subslice total: 0 <7> [311.415916] i915 device info: EU total: 0 <7> [311.415919] i915 device info: EU per subslice: 0 <7> [311.415923] i915 device info: has slice power gating: no <7> [311.415926] i915 device info: has subslice power gating: no <7> [311.415930] i915 device info: has EU power gating: no <7> [311.415933] i915 device info: CS timestamp frequency: 12500 kHz <6> [311.415936] [drm] DRM_I915_DEBUG enabled <6> [311.415939] [drm] DRM_I915_DEBUG_GEM enabled <6> [311.415942] [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [311.416476] [drm:drm_setup_crtcs] <7> [311.416515] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:55:eDP-1] <7> [311.416641] [drm:intel_dp_detect [i915]] [CONNECTOR:55:eDP-1] <7> [311.416758] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000 <7> [311.416837] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [311.416915] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [311.418468] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [311.418562] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes <7> [311.419588] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:55:eDP-1] status updated from unknown to connected <7> [311.419621] [drm:drm_add_display_info] non_desktop set to 0 <7> [311.419659] [drm:drm_add_edid_modes] ELD: no CEA Extension found <7> [311.419665] [drm:drm_add_display_info] non_desktop set to 0 <7> [311.419747] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:55:eDP-1] probed modes : <7> [311.419758] [drm:drm_mode_debug_printmodeline] Modeline 56:"1600x900" 60 107800 1600 1648 1680 1920 900 903 908 936 0x48 0x9 <7> [311.419765] [drm:drm_mode_debug_printmodeline] Modeline 57:"1600x900" 40 71870 1600 1648 1680 1920 900 903 908 936 0x40 0x9 <7> [311.419775] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:VGA-1] <7> [311.419872] [drm:intel_crt_detect [i915]] [CONNECTOR:52:VGA-1] force=1 <7> [311.419956] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x40f40000 <7> [311.429223] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x40f40000, result 0 <7> [311.429315] [drm:intel_crt_detect [i915]] CRT not detected via hotplug <7> [311.430543] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [311.430659] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [311.432273] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [311.432291] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [311.432373] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [311.432456] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [311.433872] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [311.433962] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [311.434043] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] <7> [311.434638] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:VGA-1] status updated from unknown to disconnected <7> [311.434856] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:VGA-1] disconnected <7> [311.434869] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] <7> [311.434965] [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [311.435659] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [311.435747] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [311.436002] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [311.436015] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [311.436102] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [311.436806] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [311.437883] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [311.437974] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [311.438234] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [311.438317] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [311.438650] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [311.438662] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) <7> [311.438673] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] status updated from unknown to disconnected <7> [311.438680] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected <7> [311.438691] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-1] <7> [311.438775] [drm:intel_dp_detect [i915]] [CONNECTOR:70:DP-1] <7> [311.438790] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-1] status updated from unknown to disconnected <7> [311.438855] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-1] disconnected <7> [311.438863] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:HDMI-A-2] <7> [311.438945] [drm:intel_hdmi_detect [i915]] [CONNECTOR:73:HDMI-A-2] <7> [311.439331] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [311.439414] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [311.440439] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [311.440453] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [311.440537] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [311.440621] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [311.441925] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [311.442020] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [311.442392] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [311.442477] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [311.443357] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [311.443369] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) <7> [311.443380] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:HDMI-A-2] status updated from unknown to disconnected <7> [311.443386] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:HDMI-A-2] disconnected <7> [311.443397] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:HDMI-A-3] <7> [311.443480] [drm:intel_hdmi_detect [i915]] [CONNECTOR:76:HDMI-A-3] <7> [311.443733] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [311.443813] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [311.444056] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [311.444358] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [311.444436] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [311.444495] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [311.445370] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [311.445457] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [311.445761] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) <7> [311.445846] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [311.446537] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) <7> [311.446549] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) <7> [311.446560] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:HDMI-A-3] status updated from unknown to disconnected <7> [311.446567] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:HDMI-A-3] disconnected <7> [311.446578] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:DP-2] <7> [311.446676] [drm:intel_dp_detect [i915]] [CONNECTOR:79:DP-2] <7> [311.446691] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:DP-2] status updated from unknown to disconnected <7> [311.446698] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:DP-2] disconnected <7> [311.446707] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:82:DP-3] <7> [311.446804] [drm:intel_dp_detect [i915]] [CONNECTOR:82:DP-3] <7> [311.446818] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:82:DP-3] status updated from unknown to disconnected <7> [311.446825] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:82:DP-3] disconnected <7> [311.446835] [drm:drm_setup_crtcs] connector 55 enabled? yes <7> [311.446842] [drm:drm_setup_crtcs] connector 52 enabled? no <7> [311.446848] [drm:drm_setup_crtcs] connector 64 enabled? no <7> [311.446853] [drm:drm_setup_crtcs] connector 70 enabled? no <7> [311.446859] [drm:drm_setup_crtcs] connector 73 enabled? no <7> [311.446864] [drm:drm_setup_crtcs] connector 76 enabled? no <7> [311.446870] [drm:drm_setup_crtcs] connector 79 enabled? no <7> [311.446875] [drm:drm_setup_crtcs] connector 82 enabled? no <7> [311.446980] [drm:intel_fb_initial_config [i915]] Not using firmware configuration <7> [311.447001] [drm:drm_setup_crtcs] looking for cmdline mode on connector 55 <7> [311.447008] [drm:drm_setup_crtcs] looking for preferred mode on connector 55 0 <7> [311.447013] [drm:drm_setup_crtcs] found mode 1600x900 <7> [311.447019] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config <7> [311.447212] [drm:drm_setup_crtcs] desired mode 1600x900 set on crtc 39 (0,0) <7> [311.447340] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <7> [311.449500] [drm:intelfb_create [i915]] allocated 1600x900 fb: 0x00049000 <6> [311.450516] fbcon: inteldrmfb (fb0) is primary device <7> [311.451730] [drm:intel_atomic_check [i915]] Limiting display bpp to 18 instead of Edid bpp 18, requested bpp 36, max platform bpp 36 <7> [311.451792] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 18 pixel clock 107800KHz <7> [311.451849] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 <7> [311.451905] [drm:intel_dp_compute_config [i915]] DP link rate required 242550 available 270000 <7> [311.451963] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 18, dithering: 1 <7> [311.452021] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe A][modeset] <7> [311.452087] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100) <7> [311.452190] [drm:intel_dump_pipe_config [i915]] output format: RGB <7> [311.452264] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 18, dithering: 1 <7> [311.452338] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3767883, gmch_n: 4194304, link_m: 209326, link_n: 524288, tu: 64 <7> [311.452411] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 <7> [311.452485] [drm:intel_dump_pipe_config [i915]] requested mode: <7> [311.452496] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 60 107800 1600 1648 1680 1920 900 903 908 936 0x48 0x9 <7> [311.452568] [drm:intel_dump_pipe_config [i915]] adjusted mode: <7> [311.452576] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 60 107800 1600 1648 1680 1920 900 903 908 936 0x48 0x9 <7> [311.452652] [drm:intel_dump_pipe_config [i915]] crtc timings: 107800 1600 1648 1680 1920 900 903 908 936, type: 0x48 flags: 0x9 <7> [311.452727] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1600x900, pixel rate 107800 <7> [311.452803] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled <7> [311.452885] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 <7> [311.452964] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 <7> [311.453044] [drm:intel_dump_pipe_config [i915]] planes on this crtc <7> [311.453165] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] disabled, scaler_id = -1 <7> [311.453239] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = -1 <7> [311.453313] [drm:intel_dump_pipe_config [i915]] [PLANE:36:cursor A] disabled, scaler_id = -1 <7> [311.453802] [drm:intel_atomic_commit_tail [i915]] [ENCODER:53:CRT] <7> [311.453863] [drm:intel_atomic_commit_tail [i915]] [ENCODER:54:DP A] <7> [311.453923] [drm:intel_atomic_commit_tail [i915]] [ENCODER:63:HDMI B] <7> [311.453982] [drm:intel_atomic_commit_tail [i915]] [ENCODER:69:DP B] <7> [311.454041] [drm:intel_atomic_commit_tail [i915]] [ENCODER:72:HDMI C] <7> [311.454156] [drm:intel_atomic_commit_tail [i915]] [ENCODER:75:HDMI D] <7> [311.454235] [drm:intel_atomic_commit_tail [i915]] [ENCODER:78:DP C] <7> [311.454311] [drm:intel_atomic_commit_tail [i915]] [ENCODER:81:DP D] <7> [311.454389] [drm:verify_single_dpll_state.isra.100 [i915]] PCH DPLL A <7> [311.454478] [drm:verify_single_dpll_state.isra.100 [i915]] PCH DPLL B <7> [311.454618] [drm:g4x_pre_enable_dp [i915]] enabling eDP PLL for clock 270000 <7> [311.455573] [drm:intel_enable_pipe [i915]] enabling pipe A <7> [311.455739] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 <7> [311.456003] [drm:edp_panel_on [i915]] Turn eDP port A panel power on <7> [311.456068] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle <7> [311.456213] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control abcd0008 <7> [311.456310] [drm:wait_panel_status [i915]] Wait complete <7> [311.456397] [drm:edp_panel_on [i915]] Wait for panel power on <7> [311.456488] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control abcd0009 <7> [311.531334] [drm:asle_work [i915]] bclp = 0x800000ea <3> [316.458093] [drm:wait_panel_status [i915]] *ERROR* Panel status timeout: status 90000009 control abcd0009 <7> [316.458245] [drm:wait_panel_status [i915]] Wait complete <7> [316.458358] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off <7> [316.458471] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x90000009 PP_CONTROL: 0xabcd0003 <7> [316.458706] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on <7> [316.458851] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x90000009 PP_CONTROL: 0xabcd000b <7> [316.459627] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a <7> [316.460811] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 <7> [316.460919] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 <7> [316.461025] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 <7> [316.461133] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 <7> [316.463055] [drm:intel_dp_start_link_train [i915]] clock recovery OK <7> [316.463202] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2 <7> [316.464151] [drm:ilk_hpd_irq_handler [i915]] hotplug event received, stat 0x00080000, dig 0x00000011, pins 0x00000010, long 0x00000000 <7> [316.464366] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - short <7> [316.464799] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port A - short <7> [316.465602] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful <7> [316.465763] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:55:eDP-1] Link Training Passed at Link Rate = 270000, Lane count = 1 <7> [316.467432] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 81 01 01 00 01 00 02 00 00 00 00 07 00 <7> [316.467962] [drm:intel_edp_backlight_on [i915]] <7> [316.468115] [drm:intel_panel_enable_backlight [i915]] pipe A <7> [316.468477] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 648 <7> [316.469908] [drm:i915_hotplug_work_func [i915]] running encoder hotplug functions <7> [316.470278] [drm:i915_hotplug_work_func [i915]] Connector eDP-1 (pin 4) received hotplug event. <7> [316.482912] [drm:verify_connector_state.isra.70 [i915]] [CONNECTOR:55:eDP-1] <7> [316.483059] [drm:intel_atomic_commit_tail [i915]] [CRTC:39:pipe A] <7> [316.483553] [drm:asle_work [i915]] updating opregion backlight 234/255 <7> [316.483774] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 595 <6> [316.483775] Console: switching to colour frame buffer device 200x56 <7> [316.484459] [drm:intel_dp_detect [i915]] [CONNECTOR:55:eDP-1] <7> [316.484647] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000 <7> [316.484763] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [316.484879] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [316.486287] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [316.486401] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes <6> [316.507836] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device <7> [316.517159] [drm:drm_fb_helper_hotplug_event.part.24] <7> [316.517167] [drm:drm_setup_crtcs] <7> [316.517224] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:55:eDP-1] <7> [316.517339] [drm:intel_dp_detect [i915]] [CONNECTOR:55:eDP-1] <7> [316.517486] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000 <7> [316.517578] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [316.517670] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [316.518970] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [316.519065] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes <7> [316.520123] [drm:drm_add_display_info] non_desktop set to 0 <7> [316.520167] [drm:drm_add_edid_modes] ELD: no CEA Extension found <7> [316.520172] [drm:drm_add_display_info] non_desktop set to 0 <7> [316.520266] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:55:eDP-1] probed modes : <7> [316.520279] [drm:drm_mode_debug_printmodeline] Modeline 56:"1600x900" 60 107800 1600 1648 1680 1920 900 903 908 936 0x48 0x9 <7> [316.520286] [drm:drm_mode_debug_printmodeline] Modeline 57:"1600x900" 40 71870 1600 1648 1680 1920 900 903 908 936 0x40 0x9 <7> [316.520294] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:VGA-1] <7> [316.520391] [drm:intel_crt_detect [i915]] [CONNECTOR:52:VGA-1] force=1 <7> [316.520488] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x40f40000, result 0 <7> [316.520580] [drm:intel_crt_detect [i915]] CRT not detected via hotplug <7> [316.521317] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [316.521449] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [316.521843] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [316.521853] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [316.521944] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [316.522036] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [316.523112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [316.523206] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [316.523295] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] <7> [316.523306] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:VGA-1] disconnected <7> [316.523316] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] <7> [316.523407] [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [316.523831] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [316.523945] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [316.524178] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [316.524191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [316.524280] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [316.524365] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [316.525463] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [316.525556] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [316.525815] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [316.525899] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [316.526178] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [316.526191] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) <7> [316.526201] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected <7> [316.526211] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-1] <7> [316.526297] [drm:intel_dp_detect [i915]] [CONNECTOR:70:DP-1] <7> [316.526500] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-1] disconnected <7> [316.526508] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:HDMI-A-2] <7> [316.526579] [drm:intel_hdmi_detect [i915]] [CONNECTOR:73:HDMI-A-2] <7> [316.526894] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [316.526939] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [316.527199] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [316.527209] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [316.527269] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [316.527356] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [316.528568] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [316.528645] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [316.528923] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [316.528990] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [316.529402] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [316.529412] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) <7> [316.529425] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:HDMI-A-2] disconnected <7> [316.529436] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:HDMI-A-3] <7> [316.529500] [drm:intel_hdmi_detect [i915]] [CONNECTOR:76:HDMI-A-3] <7> [316.529756] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [316.529802] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [316.530011] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [316.530018] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [316.530066] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [316.530186] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [316.531278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [316.531351] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [316.531869] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) <7> [316.531929] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [316.532408] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) <7> [316.532420] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) <7> [316.532430] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:HDMI-A-3] disconnected <7> [316.532440] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:DP-2] <7> [316.532507] [drm:intel_dp_detect [i915]] [CONNECTOR:79:DP-2] <7> [316.532521] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:DP-2] disconnected <7> [316.532529] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:82:DP-3] <7> [316.532593] [drm:intel_dp_detect [i915]] [CONNECTOR:82:DP-3] <7> [316.532604] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:82:DP-3] disconnected <7> [316.532613] [drm:drm_setup_crtcs] connector 55 enabled? yes <7> [316.532619] [drm:drm_setup_crtcs] connector 52 enabled? no <7> [316.532623] [drm:drm_setup_crtcs] connector 64 enabled? no <7> [316.532629] [drm:drm_setup_crtcs] connector 70 enabled? no <7> [316.532634] [drm:drm_setup_crtcs] connector 73 enabled? no <7> [316.532639] [drm:drm_setup_crtcs] connector 76 enabled? no <7> [316.532645] [drm:drm_setup_crtcs] connector 79 enabled? no <7> [316.532650] [drm:drm_setup_crtcs] connector 82 enabled? no <7> [316.532738] [drm:intel_fb_initial_config [i915]] Not using firmware configuration <7> [316.532756] [drm:drm_setup_crtcs] looking for cmdline mode on connector 55 <7> [316.532762] [drm:drm_setup_crtcs] looking for preferred mode on connector 55 0 <7> [316.532767] [drm:drm_setup_crtcs] found mode 1600x900 <7> [316.532772] [drm:drm_setup_crtcs] picking CRTCs for 1600x900 config <7> [316.532804] [drm:drm_setup_crtcs] desired mode 1600x900 set on crtc 39 (0,0) <7> [316.552773] [drm:drm_fb_helper_hotplug_event.part.24] <7> [316.552779] [drm:drm_setup_crtcs] <7> [316.552818] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:55:eDP-1] <7> [316.552932] [drm:intel_dp_detect [i915]] [CONNECTOR:55:eDP-1] <7> [316.553021] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000 <7> [316.553099] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [316.553613] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <6> [316.554738] snd_hda_intel 0000:00:1b.0: Linked as a consumer to 0000:00:02.0 <7> [316.557648] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [316.557758] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes <7> [316.558739] [drm:drm_add_display_info] non_desktop set to 0 <7> [316.558773] [drm:drm_add_edid_modes] ELD: no CEA Extension found <7> [316.558777] [drm:drm_add_display_info] non_desktop set to 0 <7> [316.558853] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:55:eDP-1] probed modes : <7> [316.558863] [drm:drm_mode_debug_printmodeline] Modeline 56:"1600x900" 60 107800 1600 1648 1680 1920 900 903 908 936 0x48 0x9 <7> [316.558869] [drm:drm_mode_debug_printmodeline] Modeline 57:"1600x900" 40 71870 1600 1648 1680 1920 900 903 908 936 0x40 0x9 <7> [316.558876] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:VGA-1] <7> [316.558947] [drm:intel_crt_detect [i915]] [CONNECTOR:52:VGA-1] force=1 <7> [316.559016] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x40f40000, result 0 <7> [316.559078] [drm:intel_crt_detect [i915]] CRT not detected via hotplug <7> [316.559454] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [316.559518] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [316.559910] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [316.559919] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [316.559978] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [316.560041] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [316.560957] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [316.561007] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [316.561056] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] <7> [316.561095] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:VGA-1] disconnected <7> [316.561102] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] <7> [316.561148] [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [316.561412] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [316.561456] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [316.561684] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [316.561690] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [316.561733] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [316.561777] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [316.562556] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [316.562598] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [316.562830] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [316.562874] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [316.563478] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [316.563484] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) <7> [316.563489] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:HDMI-A-1] disconnected <7> [316.563493] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-1] <7> [316.563535] [drm:intel_dp_detect [i915]] [CONNECTOR:70:DP-1] <7> [316.563544] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:70:DP-1] disconnected <7> [316.563548] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:HDMI-A-2] <7> [316.563589] [drm:intel_hdmi_detect [i915]] [CONNECTOR:73:HDMI-A-2] <7> [316.563807] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [316.563852] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [316.564148] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [316.564154] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [316.564197] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [316.564241] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [316.565038] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [316.565097] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [316.565385] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [316.565426] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [316.565649] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [316.565657] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) <7> [316.565663] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:HDMI-A-2] disconnected <7> [316.565670] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:HDMI-A-3] <7> [316.565715] [drm:intel_hdmi_detect [i915]] [CONNECTOR:76:HDMI-A-3] <7> [316.565950] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [316.565993] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [316.566212] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [316.566220] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [316.566285] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [316.566351] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [316.567187] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [316.567255] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [316.567473] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) <7> [316.567523] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [316.567763] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) <7> [316.567769] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) <7> [316.567774] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:HDMI-A-3] disconnected <7> [316.567780] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:DP-2] <7> [316.567832] [drm:intel_dp_detect [i915]] [CONNECTOR:79:DP-2] <7> [316.567841] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:DP-2] disconnected <7> [316.567846] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:82:DP-3] <7> [316.567898] [drm:intel_dp_detect [i915]] [CONNECTOR:82:DP-3] <7> [316.567906] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:82:DP-3] disconnected <7> [316.567912] [drm:drm_setup_crtcs] connector 55 enabled? yes <7> [316.567915] [drm:drm_setup_crtcs] connector 52 enabled? no <7> [316.567918] [drm:drm_setup_crtcs] connector 64 enabled? no <7> [316.567921] [drm:drm_setup_crtcs] connector 70 enabled? no <7> [316.567924] [drm:drm_setup_crtcs] connector 73 enabled? no <7> [316.567926] [drm:drm_setup_crtcs] connector 76 enabled? no <7> [316.567929] [drm:drm_setup_crtcs] connector 79 enabled? no <7> [316.567932] [drm:drm_setup_crtcs] connector 82 enabled? no <7> [316.568006] [drm:intel_fb_initial_config [i915]] Not using firmware configuration <7> [316.568019] [drm:drm_setup_crtcs] looking for cmdline mode on connector 55 <7> [316.568023] [drm:drm_setup_crtcs] looking for preferred mode on connector 55 0 <7> [316.568025] [drm:drm_setup_crtcs] found mode 1600x900 <7> [316.568028] [drm:drm_setup_crtcs] picking CRTCs for 1600x900 config <6> [316.568631] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7> [316.570046] [drm:drm_setup_crtcs] desired mode 1600x900 set on crtc 39 (0,0) <5> [316.600011] Setting dangerous option reset - tainting kernel <6> [316.604965] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:line <6> [316.604978] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) <6> [316.604983] snd_hda_codec_generic hdaudioC0D0: hp_outs=1 (0xa/0x0/0x0/0x0/0x0) <6> [316.604986] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0 <6> [316.604990] snd_hda_codec_generic hdaudioC0D0: dig-out=0x1e/0x1f <6> [316.604994] snd_hda_codec_generic hdaudioC0D0: inputs: <6> [316.604999] snd_hda_codec_generic hdaudioC0D0: Rear Mic=0xc <6> [316.605003] snd_hda_codec_generic hdaudioC0D0: Front Mic=0xb <6> [316.605007] snd_hda_codec_generic hdaudioC0D0: Line=0xe <7> [316.640623] [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [316.640734] [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [316.640815] [drm:i915_audio_component_get_eld [i915]] Not valid for port D <6> [316.653440] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input37 <6> [316.661997] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input38 <6> [316.663669] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input39 <7> [316.664569] [drm:i915_gem_do_execbuffer [i915]] EINVAL at i915_gem_do_execbuffer:2240 <7> [316.664671] [drm:i915_gem_do_execbuffer [i915]] EINVAL at i915_gem_do_execbuffer:2240 <6> [316.665685] input: HDA Intel MID Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input40 <7> [316.666593] [drm:i915_gem_do_execbuffer [i915]] EINVAL at i915_gem_do_execbuffer:2240 <7> [316.666672] [drm:i915_gem_do_execbuffer [i915]] EINVAL at i915_gem_do_execbuffer:2240 <6> [316.667034] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input41 <6> [316.668764] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input42 <6> [316.672085] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input43 <6> [316.673895] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input44 <6> [316.699658] [IGT] drv_module_reload: exiting, ret=0 <6> [316.711729] drv_module_relo (2941) used greatest stack depth: 12008 bytes left