[ 0.000000] microcode: microcode updated early to revision 0xba, date = 2010-10-03 [ 0.000000] Linux version 4.15.0-43-generic (buildd@lgw01-amd64-001) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #46-Ubuntu SMP Thu Dec 6 14:45:28 UTC 2018 (Ubuntu 4.15.0-43.46-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-43-generic root=UUID=c5f0f930-49ce-4a72-bdf5-40e8c0c396cc ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000097bff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfedffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfee0000-0x00000000dfee2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfee3000-0x00000000dfeeffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dfef0000-0x00000000dfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. 965P-DS4/965P-DS4, BIOS F12 06/25/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CCFFF write-protect [ 0.000000] CD000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 100000000 mask F00000000 write-back [ 0.000000] 4 base 200000000 mask FE0000000 write-back [ 0.000000] 5 base 0DFF00000 mask FFFF00000 write-through [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: last_pfn = 0xdfee0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f5590-0x000f559f] mapped at [ (ptrval)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 91000 size 24576 [ 0.000000] BRK [0x14373f000, 0x14373ffff] PGTABLE [ 0.000000] BRK [0x143740000, 0x143740fff] PGTABLE [ 0.000000] BRK [0x143741000, 0x143741fff] PGTABLE [ 0.000000] BRK [0x143742000, 0x143742fff] PGTABLE [ 0.000000] BRK [0x143743000, 0x143743fff] PGTABLE [ 0.000000] BRK [0x143744000, 0x143744fff] PGTABLE [ 0.000000] BRK [0x143745000, 0x143745fff] PGTABLE [ 0.000000] BRK [0x143746000, 0x143746fff] PGTABLE [ 0.000000] BRK [0x143747000, 0x143747fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x314fb000-0x34a74fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F6F80 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 0x00000000DFEE3040 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 0x00000000DFEE30C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 0x00000000DFEE3180 004B35 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 0x00000000DFEE0000 000040 [ 0.000000] ACPI: HPET 0x00000000DFEE7E00 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 0x00000000DFEE7E80 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 0x00000000DFEE7D00 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 0x00000000DFEE7F00 00015C (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.000000] ACPI: SSDT 0x00000000DFEE84B0 000275 (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21ffd1000-0x21fffbfff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000096fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dfedffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff] [ 0.000000] On node 0 totalpages: 2096758 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3990 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14268 pages used for memmap [ 0.000000] DMA32 zone: 913120 pages, LIFO batch:31 [ 0.000000] Normal zone: 18432 pages used for memmap [ 0.000000] Normal zone: 1179648 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 106 pages [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00097000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfee0000-0xdfee2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfee3000-0xdfeeffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfef0000-0xdfefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdff00000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xdff00000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2063973 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-43-generic root=UUID=c5f0f930-49ce-4a72-bdf5-40e8c0c396cc ro quiet splash vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8106232K/8387032K available (12300K kernel code, 2472K rwdata, 4252K rodata, 2408K init, 2416K bss, 280800K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39186 entries in 154 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 3 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 2399.986 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.97 BogoMIPS (lpj=9599944) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.031253] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.033141] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.033234] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.033295] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.033610] mce: CPU supports 6 MCE banks [ 0.033619] CPU0: Thermal monitoring enabled (TM2) [ 0.033621] process: using mwait in idle threads [ 0.033626] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.033627] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.033630] Spectre V2 : Mitigation: Full generic retpoline [ 0.033631] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.033632] Speculative Store Bypass: Vulnerable [ 0.033783] Freeing SMP alternatives memory: 36K [ 0.040000] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (family: 0x6, model: 0xf, stepping: 0xb) [ 0.040000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.040000] core: PEBS disabled due to CPU errata [ 0.040000] ... version: 2 [ 0.040000] ... bit width: 40 [ 0.040000] ... generic registers: 2 [ 0.040000] ... value mask: 000000ffffffffff [ 0.040000] ... max period: 000000007fffffff [ 0.040000] ... fixed-purpose events: 3 [ 0.040000] ... event mask: 0000000700000003 [ 0.040000] Hierarchical SRCU implementation. [ 0.040000] smp: Bringing up secondary CPUs ... [ 0.040000] x86: Booting SMP configuration: [ 0.040000] .... node #0, CPUs: #1 [ 0.044144] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.044161] #2 #3 [ 0.058047] smp: Brought up 1 node, 4 CPUs [ 0.058047] smpboot: Max logical packages: 1 [ 0.058047] smpboot: Total of 4 processors activated (19199.88 BogoMIPS) [ 0.060481] devtmpfs: initialized [ 0.060481] x86/mm: Memory block size: 128MB [ 0.064639] evm: security.selinux [ 0.064640] evm: security.SMACK64 [ 0.064640] evm: security.SMACK64EXEC [ 0.064641] evm: security.SMACK64TRANSMUTE [ 0.064642] evm: security.SMACK64MMAP [ 0.064643] evm: security.apparmor [ 0.064643] evm: security.ima [ 0.064644] evm: security.capability [ 0.064663] PM: Registering ACPI NVS region [mem 0xdfee0000-0xdfee2fff] (12288 bytes) [ 0.064663] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.064663] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.064663] pinctrl core: initialized pinctrl subsystem [ 0.064663] RTC time: 6:06:35, date: 01/15/19 [ 0.064663] NET: Registered protocol family 16 [ 0.064663] audit: initializing netlink subsys (disabled) [ 0.064663] audit: type=2000 audit(1547532395.064:1): state=initialized audit_enabled=0 res=1 [ 0.064663] cpuidle: using governor ladder [ 0.064663] cpuidle: using governor menu [ 0.064663] ACPI: bus type PCI registered [ 0.064663] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.064663] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.064663] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.064663] PCI: Using configuration type 1 for base access [ 0.064663] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.064663] mtrr: probably your BIOS does not setup all CPUs. [ 0.064663] mtrr: corrected configuration. [ 0.065884] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.068146] ACPI: Added _OSI(Module Device) [ 0.068147] ACPI: Added _OSI(Processor Device) [ 0.068148] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.068149] ACPI: Added _OSI(Processor Aggregator Device) [ 0.068151] ACPI: Added _OSI(Linux-Dell-Video) [ 0.068152] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.070683] ACPI: Dynamic OEM Table Load: [ 0.070690] ACPI: SSDT 0xFFFF9C931636C6C0 000087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.070897] ACPI: Dynamic OEM Table Load: [ 0.070902] ACPI: SSDT 0xFFFF9C9317149000 000087 (v01 PmRef Cpu2Ist 00003000 INTL 20040311) [ 0.071093] ACPI: Dynamic OEM Table Load: [ 0.071097] ACPI: SSDT 0xFFFF9C93171496C0 000087 (v01 PmRef Cpu3Ist 00003000 INTL 20040311) [ 0.071534] ACPI: Interpreter enabled [ 0.071557] ACPI: (supports S0 S1 S4 S5) [ 0.071559] ACPI: Using IOAPIC for interrupt routing [ 0.071594] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.071833] ACPI: Enabled 9 GPEs in block 00 to 1F [ 0.080099] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.080105] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.080111] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.080471] PCI host bridge to bus 0000:00 [ 0.080474] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.080476] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.080477] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.080479] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.080481] pci_bus 0000:00: root bus resource [mem 0xdff00000-0xfebfffff window] [ 0.080483] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.080493] pci 0000:00:00.0: [8086:29a0] type 00 class 0x060000 [ 0.080629] pci 0000:00:01.0: [8086:29a1] type 01 class 0x060400 [ 0.080672] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.080805] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300 [ 0.080845] pci 0000:00:1a.0: reg 0x20: [io 0xc000-0xc01f] [ 0.080980] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300 [ 0.081019] pci 0000:00:1a.1: reg 0x20: [io 0xc400-0xc41f] [ 0.081156] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320 [ 0.081175] pci 0000:00:1a.7: reg 0x10: [mem 0xf9205000-0xf92053ff] [ 0.081357] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300 [ 0.081376] pci 0000:00:1b.0: reg 0x10: [mem 0xf9200000-0xf9203fff 64bit] [ 0.081444] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.081564] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 [ 0.081634] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.081764] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400 [ 0.081834] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.081960] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400 [ 0.082030] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.082153] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 [ 0.082192] pci 0000:00:1d.0: reg 0x20: [io 0xc800-0xc81f] [ 0.082326] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 [ 0.082365] pci 0000:00:1d.1: reg 0x20: [io 0xcc00-0xcc1f] [ 0.082497] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300 [ 0.082536] pci 0000:00:1d.2: reg 0x20: [io 0xd000-0xd01f] [ 0.082672] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 [ 0.082691] pci 0000:00:1d.7: reg 0x10: [mem 0xf9204000-0xf92043ff] [ 0.082868] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.083035] pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100 [ 0.083114] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 0.083118] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.083122] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.083125] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.083256] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400 [ 0.083273] pci 0000:00:1f.2: reg 0x10: [io 0xd400-0xd407] [ 0.083280] pci 0000:00:1f.2: reg 0x14: [io 0xd800-0xd803] [ 0.083287] pci 0000:00:1f.2: reg 0x18: [io 0xdc00-0xdc07] [ 0.083294] pci 0000:00:1f.2: reg 0x1c: [io 0xe000-0xe003] [ 0.083301] pci 0000:00:1f.2: reg 0x20: [io 0xe400-0xe41f] [ 0.083308] pci 0000:00:1f.2: reg 0x24: [mem 0xf9206000-0xf92067ff] [ 0.083344] pci 0000:00:1f.2: PME# supported from D3hot [ 0.083459] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500 [ 0.083473] pci 0000:00:1f.3: reg 0x10: [mem 0xf9207000-0xf92070ff] [ 0.083497] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f] [ 0.083659] pci 0000:01:00.0: [10de:0de1] type 00 class 0x030000 [ 0.083674] pci 0000:01:00.0: reg 0x10: [mem 0xf4000000-0xf4ffffff] [ 0.083684] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref] [ 0.083694] pci 0000:01:00.0: reg 0x1c: [mem 0xe8000000-0xe9ffffff 64bit pref] [ 0.083700] pci 0000:01:00.0: reg 0x24: [io 0x8000-0x807f] [ 0.083707] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.083713] pci 0000:01:00.0: enabling Extended Tags [ 0.083801] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300 [ 0.083815] pci 0000:01:00.1: reg 0x10: [mem 0xf6000000-0xf6003fff] [ 0.083850] pci 0000:01:00.1: enabling Extended Tags [ 0.083944] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.083947] pci 0000:00:01.0: bridge window [io 0x8000-0x8fff] [ 0.083949] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf6ffffff] [ 0.083953] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.084008] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.084010] pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff] [ 0.084075] pci 0000:03:00.0: [11ab:4364] type 00 class 0x020000 [ 0.084105] pci 0000:03:00.0: reg 0x10: [mem 0xf8000000-0xf8003fff 64bit] [ 0.084117] pci 0000:03:00.0: reg 0x18: [io 0x9000-0x90ff] [ 0.084157] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.084224] pci 0000:03:00.0: supports D1 D2 [ 0.084226] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.096023] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.096028] pci 0000:00:1c.4: bridge window [io 0x9000-0x9fff] [ 0.096032] pci 0000:00:1c.4: bridge window [mem 0xf7000000-0xf8ffffff] [ 0.096152] pci 0000:04:00.0: [197b:2363] type 00 class 0x010601 [ 0.096253] pci 0000:04:00.0: reg 0x24: [mem 0xf9000000-0xf9001fff] [ 0.096323] pci 0000:04:00.0: PME# supported from D3hot [ 0.096403] pci 0000:04:00.1: [197b:2363] type 00 class 0x010185 [ 0.096432] pci 0000:04:00.1: reg 0x10: [io 0xa000-0xa007] [ 0.096445] pci 0000:04:00.1: reg 0x14: [io 0xa400-0xa403] [ 0.096458] pci 0000:04:00.1: reg 0x18: [io 0xa800-0xa807] [ 0.096471] pci 0000:04:00.1: reg 0x1c: [io 0xac00-0xac03] [ 0.096483] pci 0000:04:00.1: reg 0x20: [io 0xb000-0xb00f] [ 0.096608] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.096617] pci 0000:00:1c.5: PCI bridge to [bus 04] [ 0.096620] pci 0000:00:1c.5: bridge window [io 0xa000-0xbfff] [ 0.096624] pci 0000:00:1c.5: bridge window [mem 0xf9000000-0xf90fffff] [ 0.096676] pci 0000:05:06.0: [104c:8024] type 00 class 0x0c0010 [ 0.096696] pci 0000:05:06.0: reg 0x10: [mem 0xf9104000-0xf91047ff] [ 0.096705] pci 0000:05:06.0: reg 0x14: [mem 0xf9100000-0xf9103fff] [ 0.096773] pci 0000:05:06.0: supports D1 D2 [ 0.096775] pci 0000:05:06.0: PME# supported from D0 D1 D2 D3hot [ 0.096852] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) [ 0.096857] pci 0000:00:1e.0: bridge window [mem 0xf9100000-0xf91fffff] [ 0.096862] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.096864] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.096866] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.096868] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.096870] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff window] (subtractive decode) [ 0.097780] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) [ 0.097881] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.097981] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) [ 0.098080] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.098179] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.098279] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.098379] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.098479] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.100001] SCSI subsystem initialized [ 0.100028] libata version 3.00 loaded. [ 0.100055] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.100055] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.100055] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.100055] vgaarb: loaded [ 0.100064] ACPI: bus type USB registered [ 0.100089] usbcore: registered new interface driver usbfs [ 0.100099] usbcore: registered new interface driver hub [ 0.100123] usbcore: registered new device driver usb [ 0.100206] EDAC MC: Ver: 3.0.0 [ 0.100206] PCI: Using ACPI for IRQ routing [ 0.104121] PCI: pci_cache_line_size set to 64 bytes [ 0.104176] e820: reserve RAM buffer [mem 0x00097c00-0x0009ffff] [ 0.104177] e820: reserve RAM buffer [mem 0xdfee0000-0xdfffffff] [ 0.104297] NetLabel: Initializing [ 0.104298] NetLabel: domain hash size = 128 [ 0.104298] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.104318] NetLabel: unlabeled traffic allowed by default [ 0.104459] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.104463] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.104468] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.106493] clocksource: Switched to clocksource hpet [ 0.121429] VFS: Disk quotas dquot_6.6.0 [ 0.121452] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.121608] AppArmor: AppArmor Filesystem Enabled [ 0.121649] pnp: PnP ACPI init [ 0.123753] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.123756] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.123759] system 00:00: [io 0x0800-0x087f] has been reserved [ 0.123761] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.123764] system 00:00: [io 0x0880-0x088f] has been reserved [ 0.123772] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.123880] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.124330] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.124669] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.124831] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.124922] system 00:05: [io 0x0400-0x04bf] could not be reserved [ 0.124928] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.125253] system 00:06: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.125259] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.125541] system 00:07: [mem 0x000f0000-0x000f3fff] could not be reserved [ 0.125544] system 00:07: [mem 0x000f4000-0x000f7fff] could not be reserved [ 0.125546] system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.125548] system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.125550] system 00:07: [mem 0xdfee0000-0xdfefffff] could not be reserved [ 0.125552] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.125555] system 00:07: [mem 0x00100000-0xdfedffff] could not be reserved [ 0.125557] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.125559] system 00:07: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.125561] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.125563] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.125566] system 00:07: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.125568] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved [ 0.125570] system 00:07: [mem 0x000e0000-0x000effff] has been reserved [ 0.125575] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.125584] pnp: PnP ACPI: found 8 devices [ 0.133470] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.133488] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.133491] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.133498] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.133506] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 0.133521] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf9300000-0xf94fffff] [ 0.133526] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf9500000-0xf96fffff 64bit pref] [ 0.133531] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf9700000-0xf98fffff 64bit pref] [ 0.133536] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf9900000-0xf9afffff 64bit pref] [ 0.133539] pci 0000:01:00.0: BAR 6: assigned [mem 0xf5000000-0xf507ffff pref] [ 0.133542] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.133544] pci 0000:00:01.0: bridge window [io 0x8000-0x8fff] [ 0.133547] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf6ffffff] [ 0.133550] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.133554] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.133556] pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff] [ 0.133560] pci 0000:00:1c.0: bridge window [mem 0xf9300000-0xf94fffff] [ 0.133564] pci 0000:00:1c.0: bridge window [mem 0xf9500000-0xf96fffff 64bit pref] [ 0.133570] pci 0000:03:00.0: BAR 6: assigned [mem 0xf7000000-0xf701ffff pref] [ 0.133571] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.133574] pci 0000:00:1c.4: bridge window [io 0x9000-0x9fff] [ 0.133578] pci 0000:00:1c.4: bridge window [mem 0xf7000000-0xf8ffffff] [ 0.133581] pci 0000:00:1c.4: bridge window [mem 0xf9700000-0xf98fffff 64bit pref] [ 0.133586] pci 0000:00:1c.5: PCI bridge to [bus 04] [ 0.133589] pci 0000:00:1c.5: bridge window [io 0xa000-0xbfff] [ 0.133593] pci 0000:00:1c.5: bridge window [mem 0xf9000000-0xf90fffff] [ 0.133596] pci 0000:00:1c.5: bridge window [mem 0xf9900000-0xf9afffff 64bit pref] [ 0.133602] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.133606] pci 0000:00:1e.0: bridge window [mem 0xf9100000-0xf91fffff] [ 0.133613] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.133615] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.133617] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.133619] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.133621] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff window] [ 0.133622] pci_bus 0000:01: resource 0 [io 0x8000-0x8fff] [ 0.133624] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf6ffffff] [ 0.133626] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.133628] pci_bus 0000:02: resource 0 [io 0x7000-0x7fff] [ 0.133629] pci_bus 0000:02: resource 1 [mem 0xf9300000-0xf94fffff] [ 0.133631] pci_bus 0000:02: resource 2 [mem 0xf9500000-0xf96fffff 64bit pref] [ 0.133633] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff] [ 0.133635] pci_bus 0000:03: resource 1 [mem 0xf7000000-0xf8ffffff] [ 0.133636] pci_bus 0000:03: resource 2 [mem 0xf9700000-0xf98fffff 64bit pref] [ 0.133638] pci_bus 0000:04: resource 0 [io 0xa000-0xbfff] [ 0.133640] pci_bus 0000:04: resource 1 [mem 0xf9000000-0xf90fffff] [ 0.133642] pci_bus 0000:04: resource 2 [mem 0xf9900000-0xf9afffff 64bit pref] [ 0.133644] pci_bus 0000:05: resource 1 [mem 0xf9100000-0xf91fffff] [ 0.133645] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] [ 0.133647] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] [ 0.133649] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.133651] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.133652] pci_bus 0000:05: resource 8 [mem 0xdff00000-0xfebfffff window] [ 0.133768] NET: Registered protocol family 2 [ 0.134042] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.134201] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.134428] TCP: Hash tables configured (established 65536 bind 65536) [ 0.134482] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.134521] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.134607] NET: Registered protocol family 1 [ 0.135869] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.135882] pci 0000:04:00.0: async suspend disabled to avoid multi-function power-on ordering issue [ 0.135887] pci 0000:04:00.1: async suspend disabled to avoid multi-function power-on ordering issue [ 0.135892] PCI: CLS 32 bytes, default 64 [ 0.135948] Unpacking initramfs... [ 1.070119] Freeing initrd memory: 54760K [ 1.070214] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.070218] software IO TLB [mem 0xdbee0000-0xdfee0000] (64MB) mapped at [ (ptrval)- (ptrval)] [ 1.070453] Scanning for low memory corruption every 60 seconds [ 1.071221] Initialise system trusted keyrings [ 1.071234] Key type blacklist registered [ 1.071333] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.073219] zbud: loaded [ 1.073889] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.074107] fuse init (API version 7.26) [ 1.076286] Key type asymmetric registered [ 1.076288] Asymmetric key parser 'x509' registered [ 1.076342] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.076391] io scheduler noop registered [ 1.076392] io scheduler deadline registered [ 1.076428] io scheduler cfq registered (default) [ 1.077431] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 1.077432] vesafb: scrolling: redraw [ 1.077434] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.077448] vesafb: framebuffer at 0xe9000000, mapped to 0x (ptrval), using 1216k, total 1216k [ 1.077598] Console: switching to colour frame buffer device 80x30 [ 1.077612] fb0: VESA VGA frame buffer device [ 1.077629] intel_idle: does not run on family 6 model 15 [ 1.077734] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.077746] ACPI: Power Button [PWRB] [ 1.077803] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.077846] ACPI: Power Button [PWRF] [ 1.078438] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.098912] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.102300] Linux agpgart interface v0.103 [ 1.104874] loop: module loaded [ 1.105116] libphy: Fixed MDIO Bus: probed [ 1.105117] tun: Universal TUN/TAP device driver, 1.6 [ 1.105176] PPP generic driver version 2.4.2 [ 1.105239] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.105242] ehci-pci: EHCI PCI platform driver [ 1.105402] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.105410] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.109320] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 1.109338] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9205000 [ 1.124041] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.124104] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.124107] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.124110] usb usb1: Product: EHCI Host Controller [ 1.124113] usb usb1: Manufacturer: Linux 4.15.0-43-generic ehci_hcd [ 1.124115] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.124290] hub 1-0:1.0: USB hub found [ 1.124298] hub 1-0:1.0: 4 ports detected [ 1.124548] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.124554] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.128455] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 1.128468] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9204000 [ 1.144037] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.144088] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.144091] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.144093] usb usb2: Product: EHCI Host Controller [ 1.144096] usb usb2: Manufacturer: Linux 4.15.0-43-generic ehci_hcd [ 1.144099] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.144244] hub 2-0:1.0: USB hub found [ 1.144251] hub 2-0:1.0: 6 ports detected [ 1.144422] ehci-platform: EHCI generic platform driver [ 1.144434] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.144445] ohci-pci: OHCI PCI platform driver [ 1.144460] ohci-platform: OHCI generic platform driver [ 1.144467] uhci_hcd: USB Universal Host Controller Interface driver [ 1.144564] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.144570] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.144576] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.144600] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c000 [ 1.144648] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.144650] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.144652] usb usb3: Product: UHCI Host Controller [ 1.144654] usb usb3: Manufacturer: Linux 4.15.0-43-generic uhci_hcd [ 1.144656] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.144793] hub 3-0:1.0: USB hub found [ 1.144800] hub 3-0:1.0: 2 ports detected [ 1.145001] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.145007] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.145012] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.145037] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c400 [ 1.145083] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.145085] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.145087] usb usb4: Product: UHCI Host Controller [ 1.145089] usb usb4: Manufacturer: Linux 4.15.0-43-generic uhci_hcd [ 1.145091] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.145229] hub 4-0:1.0: USB hub found [ 1.145236] hub 4-0:1.0: 2 ports detected [ 1.145424] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.145430] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.145436] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.145455] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c800 [ 1.145501] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.145503] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.145505] usb usb5: Product: UHCI Host Controller [ 1.145507] usb usb5: Manufacturer: Linux 4.15.0-43-generic uhci_hcd [ 1.145508] usb usb5: SerialNumber: 0000:00:1d.0 [ 1.145644] hub 5-0:1.0: USB hub found [ 1.145650] hub 5-0:1.0: 2 ports detected [ 1.145854] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.145860] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.145866] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.145889] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00 [ 1.145935] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.145937] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.145939] usb usb6: Product: UHCI Host Controller [ 1.145941] usb usb6: Manufacturer: Linux 4.15.0-43-generic uhci_hcd [ 1.145943] usb usb6: SerialNumber: 0000:00:1d.1 [ 1.146076] hub 6-0:1.0: USB hub found [ 1.146082] hub 6-0:1.0: 2 ports detected [ 1.146273] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.146279] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.146285] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.146303] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000 [ 1.146350] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.146352] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.146354] usb usb7: Product: UHCI Host Controller [ 1.146355] usb usb7: Manufacturer: Linux 4.15.0-43-generic uhci_hcd [ 1.146357] usb usb7: SerialNumber: 0000:00:1d.2 [ 1.146491] hub 7-0:1.0: USB hub found [ 1.146498] hub 7-0:1.0: 2 ports detected [ 1.146656] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.146657] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.146807] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.146952] mousedev: PS/2 mouse device common for all mice [ 1.147164] rtc_cmos 00:01: RTC can wake from S4 [ 1.147220] rtc rtc0: invalid alarm value: 2019-1-15 6:6:61 [ 1.147289] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.147320] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.147328] i2c /dev entries driver [ 1.147334] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0 [ 1.147414] device-mapper: uevent: version 1.0.3 [ 1.147509] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.147568] ledtrig-cpu: registered to indicate activity on CPUs [ 1.148083] NET: Registered protocol family 10 [ 1.153420] Segment Routing with IPv6 [ 1.153448] NET: Registered protocol family 17 [ 1.153502] Key type dns_resolver registered [ 1.153866] RAS: Correctable Errors collector initialized. [ 1.153901] microcode: sig=0x6fb, pf=0x10, revision=0xba [ 1.154008] microcode: Microcode Update Driver: v2.2. [ 1.154021] sched_clock: Marking stable (1153992460, 0)->(1241537686, -87545226) [ 1.154352] registered taskstats version 1 [ 1.154373] Loading compiled-in X.509 certificates [ 1.157860] Loaded X.509 cert 'Build time autogenerated kernel key: 6afcca3ddc80072aeae87585a7fdb65d40603f58' [ 1.157880] zswap: loaded using pool lzo/zbud [ 1.162415] Key type big_key registered [ 1.162418] Key type trusted registered [ 1.164675] Key type encrypted registered [ 1.164677] AppArmor: AppArmor sha1 policy hashing enabled [ 1.164680] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.164683] ima: Allocated hash algorithm: sha1 [ 1.164707] evm: HMAC attrs: 0x1 [ 1.164989] Magic number: 3:793:114 [ 1.165122] rtc_cmos 00:01: setting system clock to 2019-01-15 06:06:36 UTC (1547532396) [ 1.165577] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.165578] EDD information not available. [ 1.166341] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.169323] Freeing unused kernel memory: 2408K [ 1.184046] Write protecting the kernel read-only data: 20480k [ 1.185054] Freeing unused kernel memory: 2008K [ 1.190750] Freeing unused kernel memory: 1892K [ 1.200544] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.200544] x86/mm: Checking user space page tables [ 1.209775] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.321069] sky2: driver version 1.30 [ 1.321365] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 2 [ 1.321702] sky2 0000:03:00.0 eth0: addr 00:16:e6:d5:ec:c5 [ 1.323332] ahci 0000:00:1f.2: version 3.0 [ 1.323442] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF [ 1.323509] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.323541] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode [ 1.323544] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ccc ems [ 1.323801] scsi host0: pata_jmicron [ 1.328220] scsi host1: pata_jmicron [ 1.328280] ata1: PATA max UDMA/100 cmd 0xa000 ctl 0xa400 bmdma 0xb000 irq 18 [ 1.328282] ata2: PATA max UDMA/100 cmd 0xa800 ctl 0xac00 bmdma 0xb008 irq 18 [ 1.367714] sky2 0000:03:00.0 enp3s0: renamed from eth0 [ 1.388754] scsi host2: ahci [ 1.388871] scsi host3: ahci [ 1.389172] scsi host4: ahci [ 1.389350] scsi host5: ahci [ 1.389519] scsi host6: ahci [ 1.389618] scsi host7: ahci [ 1.389673] ata3: SATA max UDMA/133 abar m2048@0xf9206000 port 0xf9206100 irq 25 [ 1.389675] ata4: SATA max UDMA/133 abar m2048@0xf9206000 port 0xf9206180 irq 25 [ 1.389677] ata5: SATA max UDMA/133 abar m2048@0xf9206000 port 0xf9206200 irq 25 [ 1.389679] ata6: SATA max UDMA/133 abar m2048@0xf9206000 port 0xf9206280 irq 25 [ 1.389681] ata7: SATA max UDMA/133 abar m2048@0xf9206000 port 0xf9206300 irq 25 [ 1.389683] ata8: SATA max UDMA/133 abar m2048@0xf9206000 port 0xf9206380 irq 25 [ 1.390109] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.396094] firewire_ohci 0000:05:06.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 1.399875] checking generic (e9000000 130000) vs hw (e0000000 8000000) [ 1.399877] checking generic (e9000000 130000) vs hw (e8000000 2000000) [ 1.399878] fb: switching to nouveaufb from VESA VGA [ 1.399903] Console: switching to colour dummy device 80x25 [ 1.400081] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.400084] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.400165] nouveau 0000:01:00.0: NVIDIA GF108 (0c1080a1) [ 1.400510] scsi host8: ahci [ 1.400635] scsi host9: ahci [ 1.400696] ata9: SATA max UDMA/133 abar m8192@0xf9000000 port 0xf9000100 irq 17 [ 1.400699] ata10: SATA max UDMA/133 abar m8192@0xf9000000 port 0xf9000180 irq 17 [ 1.524478] nouveau 0000:01:00.0: bios: version 70.08.29.00.01 [ 1.526126] nouveau 0000:01:00.0: fb: 1024 MiB DDR3 [ 1.624036] usb 7-1: new low-speed USB device number 2 using uhci_hcd [ 1.702457] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.705833] ata3.00: ATA-8: SanDisk SDSSDH2256G, X211200, max UDMA/133 [ 1.705835] ata3.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.706527] ata3.00: configured for UDMA/133 [ 1.706711] scsi 2:0:0:0: Direct-Access ATA SanDisk SDSSDH22 200 PQ: 0 ANSI: 5 [ 1.706997] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.707014] sd 2:0:0:0: [sda] Write Protect is off [ 1.707016] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.707043] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.707362] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.707868] sda: sda1 sda2 [ 1.708251] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.714492] ata10: SATA link down (SStatus 0 SControl 300) [ 1.714561] ata9: SATA link down (SStatus 0 SControl 300) [ 1.818756] usb 7-1: New USB device found, idVendor=046d, idProduct=c408 [ 1.818758] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.818760] usb 7-1: Product: USB Trackball [ 1.818762] usb 7-1: Manufacturer: Logitech [ 1.825663] hidraw: raw HID events driver (C) Jiri Kosina [ 1.843030] usbcore: registered new interface driver usbhid [ 1.843031] usbhid: USB HID core driver [ 1.845655] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/0003:046D:C408.0001/input/input3 [ 1.845800] hid-generic 0003:046D:C408.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1d.2-1/input0 [ 1.916109] firewire_core 0000:05:06.0: created device fw0: GUID 0016e60000beba24, S400 [ 2.022726] ata4: SATA link down (SStatus 0 SControl 300) [ 2.076028] tsc: Refined TSC clocksource calibration: 2399.999 MHz [ 2.076034] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2298364cab5, max_idle_ns: 440795214892 ns [ 2.334481] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.335051] ata5.00: ATA-9: WDC WD10EZEX-08M2NA0, 01.01A01, max UDMA/100 [ 2.335053] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.335655] ata5.00: configured for UDMA/100 [ 2.335872] scsi 4:0:0:0: Direct-Access ATA WDC WD10EZEX-08M 1A01 PQ: 0 ANSI: 5 [ 2.336139] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 2.336158] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.336161] sd 4:0:0:0: [sdb] 4096-byte physical blocks [ 2.336176] sd 4:0:0:0: [sdb] Write Protect is off [ 2.336178] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.336211] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.360662] sd 4:0:0:0: [sdb] Attached SCSI disk [ 2.650740] ata6: SATA link down (SStatus 0 SControl 300) [ 2.832441] [TTM] Zone kernel: Available graphics memory: 4083668 kiB [ 2.832443] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 2.832444] [TTM] Initializing pool allocator [ 2.832450] [TTM] Initializing DMA pool allocator [ 2.832468] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB [ 2.832470] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 2.832474] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 2.832476] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 2.832478] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000302 00020030 [ 2.832480] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000000 [ 2.832482] nouveau 0000:01:00.0: DRM: DCB outp 02: 08011392 00020020 [ 2.832484] nouveau 0000:01:00.0: DRM: DCB outp 03: 04022310 00000000 [ 2.832487] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030 [ 2.832488] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161 [ 2.832490] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200 [ 2.833459] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.833460] [drm] Driver supports precise vblank timestamp query. [ 2.834411] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies [ 2.947225] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x60000, bo (ptrval) [ 2.947307] fbcon: nouveaufb (fb0) is primary device [ 2.947379] Console: switching to colour frame buffer device 240x67 [ 2.947431] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 2.962622] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.963440] ata7.00: HPA detected: current 1953523055, native 1953525168 [ 2.963562] ata7.00: ATA-8: Hitachi HDS721010CLA632, JP4OA41B, max UDMA/133 [ 2.963564] ata7.00: 1953523055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.964593] ata7.00: configured for UDMA/133 [ 2.964749] scsi 6:0:0:0: Direct-Access ATA Hitachi HDS72101 A41B PQ: 0 ANSI: 5 [ 2.965080] sd 6:0:0:0: [sdc] 1953523055 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.965095] sd 6:0:0:0: [sdc] Write Protect is off [ 2.965097] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.965121] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.965136] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 2.977212] random: fast init done [ 2.979272] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.979284] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.979298] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.979477] sd 6:0:0:0: [sdc] Attached SCSI disk [ 3.032047] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 3.178235] clocksource: Switched to clocksource tsc [ 3.279493] ata8: SATA link down (SStatus 0 SControl 300) [ 3.408465] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.628970] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.643908] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.664185] systemd[1]: Detected architecture x86-64. [ 3.666573] systemd[1]: Set hostname to . [ 3.812991] systemd[1]: Created slice System Slice. [ 3.813168] systemd[1]: Listening on udev Control Socket. [ 3.813253] systemd[1]: Listening on udev Kernel Socket. [ 3.813350] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.813419] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 3.813490] systemd[1]: Listening on Syslog Socket. [ 3.813556] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.933198] lp: driver loaded but no devices found [ 3.972619] ppdev: user-space parallel port driver [ 3.975256] parport_pc 00:03: reported by Plug and Play ACPI [ 3.975327] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 4.019595] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 4.072312] systemd-journald[355]: Received request to flush runtime journal from PID 1 [ 4.076143] lp0: using parport0 (interrupt-driven). [ 4.485626] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20170831/utaddress-247) [ 4.485634] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.485672] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 4.488159] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.817599] coretemp coretemp.0: Using relative temperature scale! [ 4.821009] coretemp coretemp.0: Using relative temperature scale! [ 4.821049] coretemp coretemp.0: Using relative temperature scale! [ 4.821363] coretemp coretemp.0: Using relative temperature scale! [ 4.841330] intel_powerclamp: No package C-state available [ 4.893657] gpio_ich: GPIO from 462 to 511 on gpio_ich [ 4.932272] snd_hda_intel 0000:01:00.1: Disabling MSI [ 4.932281] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 4.959194] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 4.959197] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.959199] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 4.959201] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 [ 4.959203] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0 [ 4.959204] snd_hda_codec_realtek hdaudioC0D2: inputs: [ 4.959207] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18 [ 4.959209] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19 [ 4.959211] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a [ 4.959213] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c [ 4.959214] snd_hda_codec_realtek hdaudioC0D2: dig-in=0x1f [ 4.968717] random: crng init done [ 4.968719] random: 7 urandom warning(s) missed due to ratelimiting [ 4.973080] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 [ 4.973160] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 4.973233] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 4.973307] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 4.973380] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 4.973454] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 4.973528] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 5.105482] Adding 21651796k swap on /dev/sda2. Priority:-2 extents:1 across:21651796k SSFS [ 5.896206] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 6.272010] audit: type=1400 audit(1547532401.601:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=872 comm="apparmor_parser" [ 6.280265] audit: type=1400 audit(1547532401.613:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=871 comm="apparmor_parser" [ 6.280271] audit: type=1400 audit(1547532401.613:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=871 comm="apparmor_parser" [ 6.280274] audit: type=1400 audit(1547532401.613:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=871 comm="apparmor_parser" [ 6.282139] audit: type=1400 audit(1547532401.613:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=873 comm="apparmor_parser" [ 6.295834] audit: type=1400 audit(1547532401.625:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=869 comm="apparmor_parser" [ 6.295839] audit: type=1400 audit(1547532401.625:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=869 comm="apparmor_parser" [ 6.295842] audit: type=1400 audit(1547532401.625:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=869 comm="apparmor_parser" [ 6.295845] audit: type=1400 audit(1547532401.625:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=869 comm="apparmor_parser" [ 6.305377] audit: type=1400 audit(1547532401.637:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=875 comm="apparmor_parser" [ 7.456683] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11 [ 7.456763] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12 [ 7.456831] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 7.456904] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14 [ 8.029986] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 8.033003] sky2 0000:03:00.0 enp3s0: enabling interface [ 8.033221] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 8.920504] aufs 4.15-20180219 [ 10.413765] sky2 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex, flow control both [ 10.413834] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready [ 10.788983] vboxdrv: loading out-of-tree module taints kernel. [ 10.789265] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 10.795193] vboxdrv: Found 4 processor cores [ 10.796331] vboxdrv: fAsync=0 offMin=0x29a offMax=0x17d6 [ 10.896568] vboxdrv: TSC mode is Synchronous, tentative frequency 2399998938 Hz [ 10.896570] vboxdrv: Successfully loaded version 5.2.18_Ubuntu (interface 0x00290001) [ 10.961190] VBoxNetFlt: Successfully started. [ 10.968809] VBoxNetAdp: Successfully started. [ 10.977317] VBoxPciLinuxInit [ 10.981600] vboxpci: IOMMU not found (not registered) [ 11.963121] kauditd_printk_skb: 12 callbacks suppressed [ 11.963122] audit: type=1400 audit(1547532407.293:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=2360 comm="apparmor_parser" [ 89.576970] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 89.578886] Bridge firewalling registered [ 89.591004] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 89.865357] Initializing XFRM netlink socket [ 89.877664] Netfilter messages via NETLINK v0.30. [ 89.879880] ctnetlink v0.93: registering with nfnetlink. [ 90.094469] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 90.187479] IPv6: ADDRCONF(NETDEV_UP): br-7439cd30ff5b: link is not ready [ 90.272321] IPv6: ADDRCONF(NETDEV_UP): br-cda857f583de: link is not ready [ 93.096565] docker0: port 1(veth6d43a3a) entered blocking state [ 93.096570] docker0: port 1(veth6d43a3a) entered disabled state [ 93.096759] device veth6d43a3a entered promiscuous mode [ 93.096873] IPv6: ADDRCONF(NETDEV_UP): veth6d43a3a: link is not ready [ 94.129191] br-7439cd30ff5b: port 1(vethb8386b3) entered blocking state [ 94.129194] br-7439cd30ff5b: port 1(vethb8386b3) entered disabled state [ 94.129295] device vethb8386b3 entered promiscuous mode [ 94.129406] IPv6: ADDRCONF(NETDEV_UP): vethb8386b3: link is not ready [ 94.802099] br-7439cd30ff5b: port 2(veth0240af5) entered blocking state [ 94.802102] br-7439cd30ff5b: port 2(veth0240af5) entered disabled state [ 94.802176] device veth0240af5 entered promiscuous mode [ 94.802258] IPv6: ADDRCONF(NETDEV_UP): veth0240af5: link is not ready [ 94.802260] br-7439cd30ff5b: port 2(veth0240af5) entered blocking state [ 94.802263] br-7439cd30ff5b: port 2(veth0240af5) entered forwarding state [ 94.802823] br-7439cd30ff5b: port 2(veth0240af5) entered disabled state [ 95.469678] eth0: renamed from vethe0d196f [ 95.486946] IPv6: ADDRCONF(NETDEV_CHANGE): veth6d43a3a: link becomes ready [ 95.486992] docker0: port 1(veth6d43a3a) entered blocking state [ 95.486995] docker0: port 1(veth6d43a3a) entered forwarding state [ 95.487069] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready [ 95.966626] br-7439cd30ff5b: port 3(veth8406a77) entered blocking state [ 95.966629] br-7439cd30ff5b: port 3(veth8406a77) entered disabled state [ 95.967546] device veth8406a77 entered promiscuous mode [ 95.969291] IPv6: ADDRCONF(NETDEV_UP): veth8406a77: link is not ready [ 95.969299] br-7439cd30ff5b: port 3(veth8406a77) entered blocking state [ 95.969301] br-7439cd30ff5b: port 3(veth8406a77) entered forwarding state [ 95.969380] br-7439cd30ff5b: port 3(veth8406a77) entered disabled state [ 97.686301] eth0: renamed from vethd0e0c52 [ 97.709970] IPv6: ADDRCONF(NETDEV_CHANGE): vethb8386b3: link becomes ready [ 97.710026] br-7439cd30ff5b: port 1(vethb8386b3) entered blocking state [ 97.710030] br-7439cd30ff5b: port 1(vethb8386b3) entered forwarding state [ 97.710094] IPv6: ADDRCONF(NETDEV_CHANGE): br-7439cd30ff5b: link becomes ready [ 100.768912] eth0: renamed from veth57eb419 [ 100.791494] IPv6: ADDRCONF(NETDEV_CHANGE): veth0240af5: link becomes ready [ 100.791538] br-7439cd30ff5b: port 2(veth0240af5) entered blocking state [ 100.791540] br-7439cd30ff5b: port 2(veth0240af5) entered forwarding state [ 101.813957] eth0: renamed from vethfb009dd [ 101.830251] IPv6: ADDRCONF(NETDEV_CHANGE): veth8406a77: link becomes ready [ 101.830298] br-7439cd30ff5b: port 3(veth8406a77) entered blocking state [ 101.830301] br-7439cd30ff5b: port 3(veth8406a77) entered forwarding state [ 217.752323] nouveau 0000:01:00.0: gr: TRAP ch 12 [003f752000 fcitx-qimpanel[2579]] [ 217.752335] nouveau 0000:01:00.0: gr: GPC0/TPC0/TEX: 80000049 [ 217.752340] nouveau 0000:01:00.0: gr: GPC0/TPC1/TEX: 80000049 [ 217.752352] nouveau 0000:01:00.0: fifo: read fault at 0001224000 engine 00 [PGRAPH] client 04 [GPC0/] reason 02 [PAGE_NOT_PRESENT] on channel 12 [003f752000 fcitx-qimpanel[2579]] [ 217.752355] nouveau 0000:01:00.0: fifo: gr engine fault on channel 12, recovering... [ 217.752557] nouveau 0000:01:00.0: fcitx-qimpanel[2579]: channel 12 killed! [ 255.458775] perf: interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [ 367.625407] perf: interrupt took too long (3131 > 3127), lowering kernel.perf_event_max_sample_rate to 63750