[ 995.865904] [drm:gen8_de_irq_handler] hotplug event received, stat 0x00400000, dig 0x10101210, pins 0x00000040, long 0x00000040 [ 995.865915] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 995.865921] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 6 - cnt: 0 [ 995.865990] [drm:intel_dp_hpd_pulse] got hpd irq on port C - long [ 995.866009] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 995.866018] [drm:i915_hotplug_work_func] Connector DP-2 (pin 6) received hotplug event. [ 995.866029] [drm:intel_dp_detect] [CONNECTOR:90:DP-2] [ 995.866038] [drm:intel_power_well_enable] enabling power well 2 [ 995.866711] [drm:intel_dp_read_dpcd] DPCD: 12 14 c4 01 01 00 01 00 02 02 06 00 00 00 00 [ 995.867068] [drm:intel_dp_detect] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 995.867073] [drm:intel_dp_detect] sink rates: 162000, 270000, 540000 [ 995.867077] [drm:intel_dp_detect] common rates: 162000, 270000, 540000 [ 995.867536] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 995.867839] [drm:intel_dp_detect] Sink is not MST capable [ 995.874431] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 995.874737] [drm:intel_power_well_disable] disabling power well 2 [ 995.874760] [drm:intel_encoder_hotplug] [CONNECTOR:90:DP-2] status updated from disconnected to connected [ 995.874769] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 6) received hotplug event. [ 995.874776] [drm:intel_hdmi_detect] [CONNECTOR:95:HDMI-A-2] [ 995.926298] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 2 [ 995.936658] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 995.936666] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 995.936673] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 995.947124] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 995.947133] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 995.998298] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 2 [ 996.008761] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 997.012380] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:eDP-1] [ 997.012389] [drm:intel_dp_detect] [CONNECTOR:71:eDP-1] [ 997.012400] [drm:intel_dp_detect] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 997.012405] [drm:intel_dp_detect] sink rates: 162000, 270000 [ 997.012410] [drm:intel_dp_detect] common rates: 162000, 270000 [ 997.012464] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 997.012724] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f [ 997.013311] [drm:drm_dp_read_desc] DP sink: OUI 00-1c-f8 dev-ID \003\010UA\023\001 HW-rev 10.0 SW-rev 1.38 quirks 0x0000 [ 997.013813] [drm:drm_add_display_info] non_desktop set to 0 [ 997.013830] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 997.013836] [drm:drm_add_display_info] non_desktop set to 0 [ 997.013933] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:eDP-1] probed modes : [ 997.013943] [drm:drm_mode_debug_printmodeline] Modeline 72:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0x9 [ 997.013951] [drm:drm_mode_debug_printmodeline] Modeline 73:"1920x1080" 48 112800 1920 1936 1952 2104 1080 1083 1097 1116 0x40 0x9 [ 997.013983] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:DP-1] [ 997.013988] [drm:intel_dp_detect] [CONNECTOR:79:DP-1] [ 997.013995] [drm:intel_power_well_enable] enabling power well 2 [ 997.014039] [drm:intel_power_well_disable] disabling power well 2 [ 997.014078] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:DP-1] disconnected [ 997.014107] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:HDMI-A-1] [ 997.014113] [drm:intel_hdmi_detect] [CONNECTOR:85:HDMI-A-1] [ 997.014658] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 997.014686] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 997.015187] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 997.015268] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 997.015274] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 997.015280] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 997.025662] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 997.025672] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 997.026221] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 997.026227] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 997.026736] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 997.026821] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 997.026833] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:HDMI-A-1] disconnected [ 997.026882] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:90:DP-2] [ 997.026896] [drm:intel_dp_detect] [CONNECTOR:90:DP-2] [ 997.026906] [drm:intel_power_well_enable] enabling power well 2 [ 997.027408] [drm:intel_dp_read_dpcd] DPCD: 12 14 c4 01 01 00 01 00 02 02 06 00 00 00 00 [ 997.027888] [drm:intel_dp_detect] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 997.027894] [drm:intel_dp_detect] sink rates: 162000, 270000, 540000 [ 997.027898] [drm:intel_dp_detect] common rates: 162000, 270000, 540000 [ 997.028302] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 997.028645] [drm:intel_dp_detect] Sink is not MST capable [ 997.035113] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 997.035430] [drm:intel_power_well_disable] disabling power well 2 [ 997.035451] [drm:drm_add_display_info] non_desktop set to 0 [ 997.035462] [drm:drm_add_edid_modes] ELD monitor U28D590 [ 997.035466] [drm:drm_add_edid_modes] ELD size 32, SAD count 1 [ 997.035470] [drm:drm_add_display_info] non_desktop set to 0 [ 997.036659] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:90:DP-2] probed modes : [ 997.036674] [drm:drm_mode_debug_printmodeline] Modeline 105:"3840x2160" 60 533250 3840 3888 3920 4000 2160 2163 2168 2222 0x48 0x9 [ 997.036686] [drm:drm_mode_debug_printmodeline] Modeline 106:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9 [ 997.036699] [drm:drm_mode_debug_printmodeline] Modeline 107:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 997.036711] [drm:drm_mode_debug_printmodeline] Modeline 144:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 997.036723] [drm:drm_mode_debug_printmodeline] Modeline 145:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 997.036734] [drm:drm_mode_debug_printmodeline] Modeline 120:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 997.036746] [drm:drm_mode_debug_printmodeline] Modeline 119:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 [ 997.036758] [drm:drm_mode_debug_printmodeline] Modeline 136:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 997.036769] [drm:drm_mode_debug_printmodeline] Modeline 118:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 997.036781] [drm:drm_mode_debug_printmodeline] Modeline 121:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 997.036793] [drm:drm_mode_debug_printmodeline] Modeline 116:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 [ 997.036804] [drm:drm_mode_debug_printmodeline] Modeline 109:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 997.036816] [drm:drm_mode_debug_printmodeline] Modeline 117:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 997.036828] [drm:drm_mode_debug_printmodeline] Modeline 146:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 997.036839] [drm:drm_mode_debug_printmodeline] Modeline 137:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 997.036851] [drm:drm_mode_debug_printmodeline] Modeline 138:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 997.036862] [drm:drm_mode_debug_printmodeline] Modeline 139:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 997.036874] [drm:drm_mode_debug_printmodeline] Modeline 140:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 997.036885] [drm:drm_mode_debug_printmodeline] Modeline 141:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 997.036896] [drm:drm_mode_debug_printmodeline] Modeline 142:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 997.036907] [drm:drm_mode_debug_printmodeline] Modeline 129:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 997.036919] [drm:drm_mode_debug_printmodeline] Modeline 130:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 997.036930] [drm:drm_mode_debug_printmodeline] Modeline 131:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 997.036942] [drm:drm_mode_debug_printmodeline] Modeline 132:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 997.036953] [drm:drm_mode_debug_printmodeline] Modeline 133:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 997.036965] [drm:drm_mode_debug_printmodeline] Modeline 153:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 997.036976] [drm:drm_mode_debug_printmodeline] Modeline 134:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 997.036988] [drm:drm_mode_debug_printmodeline] Modeline 135:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 997.037052] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-2] [ 997.037060] [drm:intel_hdmi_detect] [CONNECTOR:95:HDMI-A-2] [ 997.088696] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 2 [ 997.099395] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 997.099400] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 997.099404] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 997.109449] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 997.109454] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 997.160695] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 2 [ 997.170886] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 997.170897] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-2] disconnected [ 997.173189] [drm:drm_mode_setcrtc] [CRTC:41:pipe A] [ 997.173215] [drm:drm_mode_setcrtc] [CONNECTOR:71:eDP-1] [ 997.211398] [drm:drm_mode_addfb2] [FB:103] [ 997.265564] [drm:drm_mode_setcrtc] [CRTC:55:pipe B] [ 997.265570] [drm:drm_mode_setcrtc] [CONNECTOR:90:DP-2] [ 997.265583] [drm:intel_atomic_check] [CONNECTOR:90:DP-2] checking for sink bpp constrains [ 997.265584] [drm:intel_atomic_check] clamping display bpp (was 36) to EDID reported max of 30 [ 997.265588] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 533250KHz [ 997.265589] [drm:intel_dp_compute_config] DP lane count 4 clock 540000 bpp 30 [ 997.265591] [drm:intel_dp_compute_config] DP link rate required 1999688 available 2160000 [ 997.265598] [drm:intel_atomic_check] hw max bpp: 36, pipe bpp: 30, dithering: 0 [ 997.265599] [drm:intel_dump_pipe_config] [CRTC:55:pipe B][modeset] [ 997.265601] [drm:intel_dump_pipe_config] output_types: DP (0x80) [ 997.265602] [drm:intel_dump_pipe_config] cpu_transcoder: B, pipe bpp: 30, dithering: 0 [ 997.265604] [drm:intel_dump_m_n_config] dp m_n: lanes: 4; gmch_m: 7766016, gmch_n: 8388608, link_m: 1035468, link_n: 1048576, tu: 64 [ 997.265605] [drm:intel_dump_pipe_config] audio: 1, infoframes: 0 [ 997.265606] [drm:intel_dump_pipe_config] requested mode: [ 997.265609] [drm:drm_mode_debug_printmodeline] Modeline 0:"3840x2160" 60 533250 3840 3888 3920 4000 2160 2163 2168 2222 0x48 0x9 [ 997.265610] [drm:intel_dump_pipe_config] adjusted mode: [ 997.265612] [drm:drm_mode_debug_printmodeline] Modeline 0:"3840x2160" 60 533250 3840 3888 3920 4000 2160 2163 2168 2222 0x48 0x9 [ 997.265613] [drm:intel_dump_pipe_config] crtc timings: 533250 3840 3888 3920 4000 2160 2163 2168 2222, type: 0x48 flags: 0x9 [ 997.265615] [drm:intel_dump_pipe_config] port clock: 540000, pipe src size: 3840x2160, pixel rate 533250 [ 997.265616] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 997.265618] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 997.265619] [drm:intel_dump_pipe_config] ips: 0, double wide: 0 [ 997.265620] [drm:intel_dump_pipe_config] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 [ 997.265621] [drm:intel_dump_pipe_config] planes on this crtc [ 997.265623] [drm:intel_dump_pipe_config] [PLANE:42:plane 1B] disabled, scaler_id = -1 [ 997.265624] [drm:intel_dump_pipe_config] [PLANE:47:plane 2B] disabled, scaler_id = -1 [ 997.265625] [drm:intel_dump_pipe_config] [PLANE:52:cursor B] disabled, scaler_id = -1 [ 997.265631] [drm:intel_atomic_check] New cdclk calculated to be logical 540000 kHz, actual 540000 kHz [ 997.265632] [drm:intel_atomic_check] New voltage level calculated to be logical 2, actual 2 [ 997.265638] [drm:intel_find_shared_dpll] [CRTC:41:pipe A] allocated DPLL 0 [ 997.265639] [drm:intel_reference_shared_dpll] using DPLL 0 for pipe A [ 997.265641] [drm:intel_find_shared_dpll] [CRTC:55:pipe B] allocated DPLL 1 [ 997.265697] [drm:intel_reference_shared_dpll] using DPLL 1 for pipe B [ 997.266746] [drm:intel_psr_disable_locked] Disabling PSR1 [ 997.266953] [drm:intel_edp_backlight_off] [ 997.475592] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 997.475709] [drm:intel_disable_pipe] disabling pipe A [ 997.478697] [drm:intel_edp_panel_off] Turn eDP port A panel power off [ 997.478807] [drm:intel_edp_panel_off] Wait for panel power off time [ 997.478968] [drm:wait_panel_status] mask b0000000 value 00000000 status a0000002 control 00000060 [ 997.532470] [drm:wait_panel_status] Wait complete [ 997.532484] [drm:intel_power_well_disable] disabling DDI A/E IO power well [ 997.532497] [drm:__intel_fbc_disable] Disabling FBC on pipe A [ 997.532508] [drm:intel_disable_shared_dpll] disable DPLL 0 (active 1, on? 1) for crtc 41 [ 997.532515] [drm:intel_disable_shared_dpll] disabling DPLL 0 [ 997.532525] [drm:intel_power_well_enable] enabling power well 2 [ 997.532552] [drm:intel_dump_cdclk_state] Changing CDCLK to 540000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 2 [ 997.533073] [drm:intel_disable_sagv] Disabling the SAGV [ 997.533089] [drm:intel_atomic_commit_tail] [ENCODER:70:DDI A] [ 997.533095] [drm:intel_atomic_commit_tail] [ENCODER:78:DDI B] [ 997.533100] [drm:intel_atomic_commit_tail] [ENCODER:80:DP-MST A] [ 997.533105] [drm:intel_atomic_commit_tail] [ENCODER:81:DP-MST B] [ 997.533109] [drm:intel_atomic_commit_tail] [ENCODER:82:DP-MST C] [ 997.533114] [drm:intel_atomic_commit_tail] [ENCODER:89:DDI C] [ 997.533118] [drm:intel_atomic_commit_tail] [ENCODER:91:DP-MST A] [ 997.533122] [drm:intel_atomic_commit_tail] [ENCODER:92:DP-MST B] [ 997.533127] [drm:intel_atomic_commit_tail] [ENCODER:93:DP-MST C] [ 997.533133] [drm:verify_single_dpll_state] DPLL 0 [ 997.533140] [drm:verify_single_dpll_state] DPLL 1 [ 997.533146] [drm:verify_single_dpll_state] DPLL 2 [ 997.533152] [drm:verify_single_dpll_state] DPLL 3 [ 997.533161] [drm:intel_enable_shared_dpll] enable DPLL 0 (active 1, on? 0) for crtc 41 [ 997.533163] [drm:intel_enable_shared_dpll] enabling DPLL 0 [ 997.533175] [drm:edp_panel_on] Turn eDP port A panel power on [ 997.533221] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 997.533351] [drm:gen8_de_irq_handler] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010 [ 997.533364] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 997.533371] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 4 - cnt: 0 [ 997.533417] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 998.155396] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000060 [ 998.155446] [drm:wait_panel_status] Wait complete [ 998.155552] [drm:edp_panel_on] Wait for panel power on [ 998.155718] [drm:wait_panel_status] mask b000000f value 80000008 status 9000000a control 00000063 [ 998.207976] [drm:gen8_de_irq_handler] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010 [ 998.207987] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 998.207995] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 4 - cnt: 1 [ 998.208074] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 998.364092] [drm:wait_panel_status] Wait complete [ 998.364106] [drm:intel_power_well_enable] enabling DDI A/E IO power well [ 998.364175] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 998.364374] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b [ 998.365216] [drm:intel_dp_start_link_train] Using LINK_BW_SET value 0a [ 998.365700] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 998.365707] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 998.365712] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 998.365719] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS1 [ 998.366545] [drm:intel_dp_start_link_train] clock recovery OK [ 998.366553] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS2 [ 998.367654] [drm:intel_dp_start_link_train] Channel EQ done. DP Training successful [ 998.367662] [drm:intel_dp_start_link_train] [CONNECTOR:71:eDP-1] Link Training Passed at Link Rate = 270000, Lane count = 2 [ 998.368465] [drm:intel_enable_pipe] enabling pipe A [ 998.368487] [drm:intel_edp_backlight_on] [ 998.368491] [drm:intel_panel_enable_backlight] pipe A [ 998.368567] [drm:intel_panel_actually_set_backlight] set backlight PWM = 74559 [ 998.368785] [drm:intel_psr_enable_locked] Enabling PSR1 [ 998.369247] [drm:intel_enable_ddi] Panel doesn't support DRRS [ 998.369253] [drm:intel_fbc_enable] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1 [ 998.369255] [drm:intel_fbc_enable] Enabling FBC on pipe A [ 998.385300] [drm:intel_enable_shared_dpll] enable DPLL 1 (active 2, on? 0) for crtc 55 [ 998.385303] [drm:intel_enable_shared_dpll] enabling DPLL 1 [ 998.385394] [drm:intel_power_well_enable] enabling DDI C IO power well [ 998.386160] [drm:intel_dp_start_link_train] Using LINK_BW_SET value 14 [ 998.386473] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 998.386476] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 998.386479] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 998.386483] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS1 [ 998.387097] [drm:intel_dp_set_signal_levels] Using signal levels 04000000 [ 998.387101] [drm:intel_dp_set_signal_levels] Using vswing level 1 [ 998.387106] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 998.387698] [drm:intel_dp_start_link_train] clock recovery OK [ 998.387702] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS3 [ 998.388614] [drm:intel_dp_set_signal_levels] Using signal levels 05000000 [ 998.388617] [drm:intel_dp_set_signal_levels] Using vswing level 1 [ 998.388620] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 998.389530] [drm:intel_dp_start_link_train] Channel EQ done. DP Training successful [ 998.389616] [drm:intel_dp_start_link_train] [CONNECTOR:90:DP-2] Link Training Passed at Link Rate = 540000, Lane count = 4 [ 998.390309] [drm:intel_enable_pipe] enabling pipe B [ 998.390330] [drm:intel_enable_ddi] Panel doesn't support DRRS [ 998.390337] [drm:intel_audio_codec_enable] ELD on [CONNECTOR:90:DP-2], [ENCODER:89:DDI C] [ 998.390342] [drm:hsw_audio_codec_enable] Enable audio codec on pipe B, 32 bytes ELD [ 998.390355] [drm:hsw_audio_config_update] using Maud 512, Naud 11250 [ 998.403226] [drm:i915_audio_component_get_eld] Not valid for port B [ 998.403231] [drm:i915_audio_component_get_eld] Not valid for port B [ 998.403235] [drm:i915_audio_component_get_eld] Not valid for port B [ 998.403246] [drm:i915_audio_component_get_eld] Not valid for port C [ 998.403249] [drm:i915_audio_component_get_eld] Not valid for port C [ 998.403252] [drm:i915_audio_component_get_eld] Not valid for port D [ 998.403255] [drm:i915_audio_component_get_eld] Not valid for port D [ 998.403259] [drm:i915_audio_component_get_eld] Not valid for port D [ 998.404187] [drm:hsw_audio_config_update] using Maud 512, Naud 11250 [ 998.407144] [drm:verify_connector_state] [CONNECTOR:71:eDP-1] [ 998.407159] [drm:intel_atomic_commit_tail] [CRTC:41:pipe A] [ 998.407188] [drm:verify_single_dpll_state] DPLL 0 [ 998.407218] [drm:verify_connector_state] [CONNECTOR:90:DP-2] [ 998.407227] [drm:intel_atomic_commit_tail] [CRTC:55:pipe B] [ 998.407249] [drm:verify_single_dpll_state] DPLL 1 [ 998.516984] [drm:drm_mode_addfb2] [FB:143] [ 998.516989] [drm:drm_mode_addfb2] [FB:158] [ 998.520795] [drm:drm_mode_addfb2] [FB:163] [ 998.520821] [drm:drm_mode_addfb2] [FB:164] [ 998.583798] [drm:drm_mode_addfb2] [FB:165] [ 998.583802] [drm:drm_mode_addfb2] [FB:166] [ 998.591636] [drm:drm_mode_addfb2] [FB:167] [ 998.591641] [drm:drm_mode_addfb2] [FB:168] [ 998.603982] [drm:drm_mode_addfb2] [FB:169] [ 998.603988] [drm:drm_mode_addfb2] [FB:170] [ 998.951982] [drm:gen8_de_irq_handler] hotplug event received, stat 0x00400000, dig 0x10101210, pins 0x00000040, long 0x00000040 [ 998.951998] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 998.952005] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 6 - cnt: 0 [ 998.952069] [drm:intel_dp_hpd_pulse] got hpd irq on port C - long [ 998.952091] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 998.952102] [drm:i915_hotplug_work_func] Connector DP-2 (pin 6) received hotplug event. [ 998.952109] [drm:intel_dp_detect] [CONNECTOR:90:DP-2] [ 998.952167] [drm:intel_encoder_hotplug] [CONNECTOR:90:DP-2] status updated from connected to disconnected [ 998.952175] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 6) received hotplug event. [ 998.952182] [drm:intel_hdmi_detect] [CONNECTOR:95:HDMI-A-2] [ 999.003690] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 2 [ 999.014101] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 999.014108] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 999.014115] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 999.024400] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 999.024409] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 999.075716] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 2 [ 999.086036] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 999.988116] [drm:gen8_de_irq_handler] hotplug event received, stat 0x00400000, dig 0x10101210, pins 0x00000040, long 0x00000040 [ 999.988126] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 999.988132] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 6 - cnt: 0 [ 999.988230] [drm:intel_dp_hpd_pulse] got hpd irq on port C - long [ 999.988286] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 999.988317] [drm:i915_hotplug_work_func] Connector DP-2 (pin 6) received hotplug event. [ 999.988340] [drm:intel_dp_detect] [CONNECTOR:90:DP-2] [ 999.989698] [drm:intel_dp_read_dpcd] DPCD: 12 14 c4 01 01 00 01 00 02 02 06 00 00 00 00 [ 999.990018] [drm:intel_dp_detect] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 999.990023] [drm:intel_dp_detect] sink rates: 162000, 270000, 540000 [ 999.990027] [drm:intel_dp_detect] common rates: 162000, 270000, 540000 [ 999.990620] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 999.990924] [drm:intel_dp_detect] Sink is not MST capable [ 999.997321] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 999.997632] [drm:intel_encoder_hotplug] [CONNECTOR:90:DP-2] status updated from disconnected to connected [ 999.998597] [drm:intel_dp_start_link_train] Using LINK_BW_SET value 14 [ 999.998935] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 999.998940] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 999.998945] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 999.998952] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS1 [ 999.999599] [drm:intel_dp_set_signal_levels] Using signal levels 04000000 [ 999.999605] [drm:intel_dp_set_signal_levels] Using vswing level 1 [ 999.999610] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1000.000241] [drm:intel_dp_set_signal_levels] Using signal levels 07000000 [ 1000.000248] [drm:intel_dp_set_signal_levels] Using vswing level 2 [ 1000.000256] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1000.000911] [drm:intel_dp_start_link_train] clock recovery OK [ 1000.000918] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS3 [ 1000.001882] [drm:intel_dp_set_signal_levels] Using signal levels 08000000 [ 1000.001888] [drm:intel_dp_set_signal_levels] Using vswing level 2 [ 1000.001893] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 1000.002884] [drm:intel_dp_set_signal_levels] Using signal levels 07000000 [ 1000.002891] [drm:intel_dp_set_signal_levels] Using vswing level 2 [ 1000.002895] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1000.003858] [drm:intel_dp_set_signal_levels] Using signal levels 08000000 [ 1000.003866] [drm:intel_dp_set_signal_levels] Using vswing level 2 [ 1000.003870] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 1000.004799] [drm:intel_dp_start_link_train] Channel EQ done. DP Training successful [ 1000.004892] [drm:intel_dp_start_link_train] [CONNECTOR:90:DP-2] Link Training Passed at Link Rate = 540000, Lane count = 4 [ 1000.007130] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 6) received hotplug event. [ 1000.007139] [drm:intel_hdmi_detect] [CONNECTOR:95:HDMI-A-2] [ 1000.058325] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 2 [ 1000.068601] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1000.068611] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 1000.068620] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 1000.078934] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1000.078943] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 1000.130256] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 2 [ 1000.140448] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 1000.140554] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:eDP-1] [ 1000.140562] [drm:intel_dp_detect] [CONNECTOR:71:eDP-1] [ 1000.140573] [drm:intel_dp_detect] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 1000.140577] [drm:intel_dp_detect] sink rates: 162000, 270000 [ 1000.140582] [drm:intel_dp_detect] common rates: 162000, 270000 [ 1000.141178] [drm:drm_dp_read_desc] DP sink: OUI 00-1c-f8 dev-ID \003\010UA\023\001 HW-rev 10.0 SW-rev 1.38 quirks 0x0000 [ 1000.141646] [drm:drm_add_display_info] non_desktop set to 0 [ 1000.141661] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 1000.141667] [drm:drm_add_display_info] non_desktop set to 0 [ 1000.141778] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:eDP-1] probed modes : [ 1000.141792] [drm:drm_mode_debug_printmodeline] Modeline 72:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0x9 [ 1000.141805] [drm:drm_mode_debug_printmodeline] Modeline 73:"1920x1080" 48 112800 1920 1936 1952 2104 1080 1083 1097 1116 0x40 0x9 [ 1000.141883] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:DP-1] [ 1000.141890] [drm:intel_dp_detect] [CONNECTOR:79:DP-1] [ 1000.141944] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:DP-1] disconnected [ 1000.141975] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:HDMI-A-1] [ 1000.141984] [drm:intel_hdmi_detect] [CONNECTOR:85:HDMI-A-1] [ 1000.142513] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1000.142519] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1000.143032] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1000.143108] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1000.143115] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 1000.143123] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 1000.153871] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1000.153880] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 1000.154438] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1000.154445] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1000.154935] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1000.155057] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 1000.155080] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:HDMI-A-1] disconnected [ 1000.155144] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:90:DP-2] [ 1000.155158] [drm:intel_dp_detect] [CONNECTOR:90:DP-2] [ 1000.155665] [drm:intel_dp_read_dpcd] DPCD: 12 14 c4 01 01 00 01 00 02 02 06 00 00 00 00 [ 1000.156029] [drm:intel_dp_detect] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 1000.156041] [drm:intel_dp_detect] sink rates: 162000, 270000, 540000 [ 1000.156051] [drm:intel_dp_detect] common rates: 162000, 270000, 540000 [ 1000.156510] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 1000.156834] [drm:intel_dp_detect] Sink is not MST capable [ 1000.163571] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 1000.163885] [drm:drm_add_display_info] non_desktop set to 0 [ 1000.163899] [drm:drm_add_edid_modes] ELD monitor U28D590 [ 1000.163903] [drm:drm_add_edid_modes] ELD size 32, SAD count 1 [ 1000.163908] [drm:drm_add_display_info] non_desktop set to 0 [ 1000.164877] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:90:DP-2] probed modes : [ 1000.164888] [drm:drm_mode_debug_printmodeline] Modeline 105:"3840x2160" 60 533250 3840 3888 3920 4000 2160 2163 2168 2222 0x48 0x9 [ 1000.164896] [drm:drm_mode_debug_printmodeline] Modeline 106:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9 [ 1000.164903] [drm:drm_mode_debug_printmodeline] Modeline 107:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1000.164910] [drm:drm_mode_debug_printmodeline] Modeline 144:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1000.164917] [drm:drm_mode_debug_printmodeline] Modeline 145:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1000.164924] [drm:drm_mode_debug_printmodeline] Modeline 120:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 1000.164931] [drm:drm_mode_debug_printmodeline] Modeline 119:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 [ 1000.164938] [drm:drm_mode_debug_printmodeline] Modeline 136:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1000.164945] [drm:drm_mode_debug_printmodeline] Modeline 118:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1000.164952] [drm:drm_mode_debug_printmodeline] Modeline 121:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 1000.164959] [drm:drm_mode_debug_printmodeline] Modeline 116:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 [ 1000.164966] [drm:drm_mode_debug_printmodeline] Modeline 109:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1000.164973] [drm:drm_mode_debug_printmodeline] Modeline 117:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1000.165039] [drm:drm_mode_debug_printmodeline] Modeline 146:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1000.165068] [drm:drm_mode_debug_printmodeline] Modeline 137:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1000.165090] [drm:drm_mode_debug_printmodeline] Modeline 138:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 1000.165115] [drm:drm_mode_debug_printmodeline] Modeline 139:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1000.165137] [drm:drm_mode_debug_printmodeline] Modeline 140:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 1000.165163] [drm:drm_mode_debug_printmodeline] Modeline 141:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1000.165187] [drm:drm_mode_debug_printmodeline] Modeline 142:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 1000.165203] [drm:drm_mode_debug_printmodeline] Modeline 129:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1000.165214] [drm:drm_mode_debug_printmodeline] Modeline 130:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 1000.165225] [drm:drm_mode_debug_printmodeline] Modeline 131:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1000.165238] [drm:drm_mode_debug_printmodeline] Modeline 132:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 1000.165249] [drm:drm_mode_debug_printmodeline] Modeline 133:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 1000.165261] [drm:drm_mode_debug_printmodeline] Modeline 153:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 1000.165276] [drm:drm_mode_debug_printmodeline] Modeline 134:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1000.165290] [drm:drm_mode_debug_printmodeline] Modeline 135:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1000.165368] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-2] [ 1000.165379] [drm:intel_hdmi_detect] [CONNECTOR:95:HDMI-A-2] [ 1000.216209] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 2 [ 1000.226563] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1000.226572] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 1000.226580] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 1000.236595] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1000.236602] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 1000.288173] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 2 [ 1000.298348] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 1000.298359] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-2] disconnected [ 1000.300279] [drm:drm_mode_setcrtc] [CRTC:41:pipe A] [ 1000.300297] [drm:drm_mode_setcrtc] [CONNECTOR:71:eDP-1] [ 1000.338532] [drm:drm_mode_setcrtc] [CRTC:55:pipe B] [ 1000.338557] [drm:drm_mode_setcrtc] [CONNECTOR:90:DP-2] [ 1001.145557] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:eDP-1] [ 1001.145566] [drm:intel_dp_detect] [CONNECTOR:71:eDP-1] [ 1001.145577] [drm:intel_dp_detect] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 1001.145582] [drm:intel_dp_detect] sink rates: 162000, 270000 [ 1001.145586] [drm:intel_dp_detect] common rates: 162000, 270000 [ 1001.146152] [drm:drm_dp_read_desc] DP sink: OUI 00-1c-f8 dev-ID \003\010UA\023\001 HW-rev 10.0 SW-rev 1.38 quirks 0x0000 [ 1001.146638] [drm:drm_add_display_info] non_desktop set to 0 [ 1001.146667] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 1001.146687] [drm:drm_add_display_info] non_desktop set to 0 [ 1001.146834] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:eDP-1] probed modes : [ 1001.146849] [drm:drm_mode_debug_printmodeline] Modeline 72:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0x9 [ 1001.146864] [drm:drm_mode_debug_printmodeline] Modeline 73:"1920x1080" 48 112800 1920 1936 1952 2104 1080 1083 1097 1116 0x40 0x9 [ 1001.146931] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:DP-1] [ 1001.146939] [drm:intel_dp_detect] [CONNECTOR:79:DP-1] [ 1001.146996] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:DP-1] disconnected [ 1001.147047] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:HDMI-A-1] [ 1001.147056] [drm:intel_hdmi_detect] [CONNECTOR:85:HDMI-A-1] [ 1001.147671] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1001.147681] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1001.148168] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1001.148253] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1001.148258] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 1001.148265] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 1001.158482] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1001.158504] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 1001.159256] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1001.159261] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1001.159814] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1001.159917] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 1001.159929] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:HDMI-A-1] disconnected [ 1001.159981] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:90:DP-2] [ 1001.160009] [drm:intel_dp_detect] [CONNECTOR:90:DP-2] [ 1001.160568] [drm:intel_dp_read_dpcd] DPCD: 12 14 c4 01 01 00 01 00 02 02 06 00 00 00 00 [ 1001.160930] [drm:intel_dp_detect] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 1001.160936] [drm:intel_dp_detect] sink rates: 162000, 270000, 540000 [ 1001.160941] [drm:intel_dp_detect] common rates: 162000, 270000, 540000 [ 1001.161357] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 1001.161704] [drm:intel_dp_detect] Sink is not MST capable [ 1001.168497] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 1001.168818] [drm:drm_add_display_info] non_desktop set to 0 [ 1001.168833] [drm:drm_add_edid_modes] ELD monitor U28D590 [ 1001.168838] [drm:drm_add_edid_modes] ELD size 32, SAD count 1 [ 1001.168842] [drm:drm_add_display_info] non_desktop set to 0 [ 1001.169794] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:90:DP-2] probed modes : [ 1001.169807] [drm:drm_mode_debug_printmodeline] Modeline 105:"3840x2160" 60 533250 3840 3888 3920 4000 2160 2163 2168 2222 0x48 0x9 [ 1001.169815] [drm:drm_mode_debug_printmodeline] Modeline 106:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9 [ 1001.169823] [drm:drm_mode_debug_printmodeline] Modeline 107:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1001.169830] [drm:drm_mode_debug_printmodeline] Modeline 144:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1001.169836] [drm:drm_mode_debug_printmodeline] Modeline 145:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1001.169843] [drm:drm_mode_debug_printmodeline] Modeline 120:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 1001.169850] [drm:drm_mode_debug_printmodeline] Modeline 119:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 [ 1001.169857] [drm:drm_mode_debug_printmodeline] Modeline 136:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1001.169866] [drm:drm_mode_debug_printmodeline] Modeline 118:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1001.169876] [drm:drm_mode_debug_printmodeline] Modeline 121:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 1001.169883] [drm:drm_mode_debug_printmodeline] Modeline 116:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 [ 1001.169890] [drm:drm_mode_debug_printmodeline] Modeline 109:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1001.169897] [drm:drm_mode_debug_printmodeline] Modeline 117:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1001.169904] [drm:drm_mode_debug_printmodeline] Modeline 146:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1001.169911] [drm:drm_mode_debug_printmodeline] Modeline 137:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1001.169918] [drm:drm_mode_debug_printmodeline] Modeline 138:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 1001.169924] [drm:drm_mode_debug_printmodeline] Modeline 139:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1001.169931] [drm:drm_mode_debug_printmodeline] Modeline 140:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 1001.169940] [drm:drm_mode_debug_printmodeline] Modeline 141:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1001.169951] [drm:drm_mode_debug_printmodeline] Modeline 142:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 1001.169958] [drm:drm_mode_debug_printmodeline] Modeline 129:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1001.169964] [drm:drm_mode_debug_printmodeline] Modeline 130:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 1001.169972] [drm:drm_mode_debug_printmodeline] Modeline 131:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1001.169978] [drm:drm_mode_debug_printmodeline] Modeline 132:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 1001.169985] [drm:drm_mode_debug_printmodeline] Modeline 133:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 1001.169992] [drm:drm_mode_debug_printmodeline] Modeline 153:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 1001.169999] [drm:drm_mode_debug_printmodeline] Modeline 134:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1001.170007] [drm:drm_mode_debug_printmodeline] Modeline 135:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1001.170067] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-2] [ 1001.170076] [drm:intel_hdmi_detect] [CONNECTOR:95:HDMI-A-2] [ 1001.221724] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 2 [ 1001.231937] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1001.231945] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 1001.231952] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 1001.242099] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1001.242106] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 1001.293679] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 2 [ 1001.303931] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 1001.303942] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-2] disconnected [ 1001.305825] [drm:drm_mode_setcrtc] [CRTC:41:pipe A] [ 1001.305847] [drm:drm_mode_setcrtc] [CONNECTOR:71:eDP-1] [ 1001.344317] [drm:drm_mode_setcrtc] [CRTC:55:pipe B] [ 1001.344348] [drm:drm_mode_setcrtc] [CONNECTOR:90:DP-2] [ 1004.168117] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 1004.168279] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067