[ 1296.028742] [drm:gen8_de_irq_handler] hotplug event received, stat 0x00400000, dig 0x10101210, pins 0x00000040, long 0x00000040
[ 1296.028753] [drm:intel_hpd_irq_handler] digital hpd port C - long
[ 1296.028759] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 6 - cnt: 0
[ 1296.028834] [drm:intel_dp_hpd_pulse] got hpd irq on port C - long
[ 1296.028857] [drm:i915_hotplug_work_func] running encoder hotplug functions
[ 1296.028867] [drm:i915_hotplug_work_func] Connector DP-2 (pin 6) received hotplug event.
[ 1296.028874] [drm:intel_dp_detect] [CONNECTOR:90:DP-2]
[ 1296.028883] [drm:intel_power_well_enable] enabling power well 2
[ 1296.029390] [drm:intel_dp_read_dpcd] DPCD: 12 14 c4 01 01 00 01 00 02 02 06 00 00 00 00
[ 1296.029846] [drm:intel_dp_detect] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[ 1296.029852] [drm:intel_dp_detect] sink rates: 162000, 270000, 540000
[ 1296.029859] [drm:intel_dp_detect] common rates: 162000, 270000, 540000
[ 1296.030279] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[ 1296.030599] [drm:intel_dp_detect] Sink is not MST capable
[ 1296.037278] [drm:drm_detect_monitor_audio] Monitor has basic audio support
[ 1296.037587] [drm:intel_power_well_disable] disabling power well 2
[ 1296.037608] [drm:intel_encoder_hotplug] [CONNECTOR:90:DP-2] status updated from disconnected to connected
[ 1296.037615] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 6) received hotplug event.
[ 1296.037622] [drm:intel_hdmi_detect] [CONNECTOR:95:HDMI-A-2]
[ 1296.089288] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 2
[ 1296.099750] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[ 1296.099760] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[ 1296.099767] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1
[ 1296.109909] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[ 1296.109917] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0
[ 1296.161188] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 2
[ 1296.171773] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
[ 1296.778228] [drm:gen8_de_irq_handler] hotplug event received, stat 0x00400000, dig 0x10101210, pins 0x00000040, long 0x00000040
[ 1296.778240] [drm:intel_hpd_irq_handler] digital hpd port C - long
[ 1296.778246] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 6 - cnt: 1
[ 1296.778285] [drm:intel_dp_hpd_pulse] got hpd irq on port C - long
[ 1296.778317] [drm:i915_hotplug_work_func] running encoder hotplug functions
[ 1296.778337] [drm:i915_hotplug_work_func] Connector DP-2 (pin 6) received hotplug event.
[ 1296.778361] [drm:intel_dp_detect] [CONNECTOR:90:DP-2]
[ 1296.778387] [drm:intel_power_well_enable] enabling power well 2
[ 1296.778460] [drm:intel_power_well_disable] disabling power well 2
[ 1296.778499] [drm:intel_encoder_hotplug] [CONNECTOR:90:DP-2] status updated from connected to disconnected
[ 1296.778507] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 6) received hotplug event.
[ 1296.778516] [drm:intel_hdmi_detect] [CONNECTOR:95:HDMI-A-2]
[ 1296.829845] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 2
[ 1296.840087] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[ 1296.840094] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[ 1296.840101] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1
[ 1296.850303] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[ 1296.850312] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0
[ 1296.901803] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 2
[ 1296.912048] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
[ 1297.376402] [drm:gen8_de_irq_handler] hotplug event received, stat 0x00400000, dig 0x10101210, pins 0x00000040, long 0x00000040
[ 1297.376450] [drm:intel_hpd_irq_handler] digital hpd port C - long
[ 1297.376456] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 6 - cnt: 0
[ 1297.376501] [drm:intel_dp_hpd_pulse] got hpd irq on port C - long
[ 1297.376549] [drm:i915_hotplug_work_func] running encoder hotplug functions
[ 1297.376570] [drm:i915_hotplug_work_func] Connector DP-2 (pin 6) received hotplug event.
[ 1297.376580] [drm:intel_dp_detect] [CONNECTOR:90:DP-2]
[ 1297.376592] [drm:intel_power_well_enable] enabling power well 2
[ 1297.377104] [drm:intel_dp_read_dpcd] DPCD: 12 14 c4 01 01 00 01 00 02 02 06 00 00 00 00
[ 1297.377437] [drm:intel_dp_detect] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[ 1297.377453] [drm:intel_dp_detect] sink rates: 162000, 270000, 540000
[ 1297.377469] [drm:intel_dp_detect] common rates: 162000, 270000, 540000
[ 1297.377899] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[ 1297.378223] [drm:intel_dp_detect] Sink is not MST capable
[ 1297.384861] [drm:drm_detect_monitor_audio] Monitor has basic audio support
[ 1297.385170] [drm:intel_power_well_disable] disabling power well 2
[ 1297.385192] [drm:intel_encoder_hotplug] [CONNECTOR:90:DP-2] status updated from disconnected to connected
[ 1297.385200] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 6) received hotplug event.
[ 1297.385207] [drm:intel_hdmi_detect] [CONNECTOR:95:HDMI-A-2]
[ 1297.436498] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 2
[ 1297.446852] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[ 1297.446861] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[ 1297.446868] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1
[ 1297.457007] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[ 1297.457018] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0
[ 1297.507462] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 2
[ 1297.517671] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
[ 1298.521241] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:eDP-1]
[ 1298.521251] [drm:intel_dp_detect] [CONNECTOR:71:eDP-1]
[ 1298.521263] [drm:intel_dp_detect] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[ 1298.521268] [drm:intel_dp_detect] sink rates: 162000, 270000
[ 1298.521273] [drm:intel_dp_detect] common rates: 162000, 270000
[ 1298.521327] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[ 1298.521528] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
[ 1298.522169] [drm:drm_dp_read_desc] DP sink: OUI 00-1c-f8 dev-ID \003\010UA\023\001 HW-rev 10.0 SW-rev 1.38 quirks 0x0000
[ 1298.522616] [drm:drm_add_display_info] non_desktop set to 0
[ 1298.522630] [drm:drm_add_edid_modes] ELD: no CEA Extension found
[ 1298.522634] [drm:drm_add_display_info] non_desktop set to 0
[ 1298.522721] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:eDP-1] probed modes :
[ 1298.522737] [drm:drm_mode_debug_printmodeline] Modeline 72:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0x9
[ 1298.522745] [drm:drm_mode_debug_printmodeline] Modeline 73:"1920x1080" 48 112800 1920 1936 1952 2104 1080 1083 1097 1116 0x40 0x9
[ 1298.522872] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:DP-1]
[ 1298.522899] [drm:intel_dp_detect] [CONNECTOR:79:DP-1]
[ 1298.522913] [drm:intel_power_well_enable] enabling power well 2
[ 1298.523035] [drm:intel_power_well_disable] disabling power well 2
[ 1298.523066] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:DP-1] disconnected
[ 1298.523100] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:HDMI-A-1]
[ 1298.523109] [drm:intel_hdmi_detect] [CONNECTOR:85:HDMI-A-1]
[ 1298.523638] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 1298.523645] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 1298.524254] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 1298.524343] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[ 1298.524350] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[ 1298.524357] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
[ 1298.534603] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[ 1298.534612] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
[ 1298.535188] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 1298.535195] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 1298.535674] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 1298.535759] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
[ 1298.535770] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:HDMI-A-1] disconnected
[ 1298.535854] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:90:DP-2]
[ 1298.535881] [drm:intel_dp_detect] [CONNECTOR:90:DP-2]
[ 1298.535914] [drm:intel_power_well_enable] enabling power well 2
[ 1298.536491] [drm:intel_dp_read_dpcd] DPCD: 12 14 c4 01 01 00 01 00 02 02 06 00 00 00 00
[ 1298.536865] [drm:intel_dp_detect] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[ 1298.536874] [drm:intel_dp_detect] sink rates: 162000, 270000, 540000
[ 1298.536881] [drm:intel_dp_detect] common rates: 162000, 270000, 540000
[ 1298.537313] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[ 1298.537633] [drm:intel_dp_detect] Sink is not MST capable
[ 1298.544393] [drm:drm_detect_monitor_audio] Monitor has basic audio support
[ 1298.544703] [drm:intel_power_well_disable] disabling power well 2
[ 1298.544722] [drm:drm_add_display_info] non_desktop set to 0
[ 1298.544734] [drm:drm_add_edid_modes] ELD monitor U28E590
[ 1298.544739] [drm:drm_add_edid_modes] ELD size 32, SAD count 1
[ 1298.544743] [drm:drm_add_display_info] non_desktop set to 0
[ 1298.545944] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:90:DP-2] probed modes :
[ 1298.545955] [drm:drm_mode_debug_printmodeline] Modeline 100:"3840x2160" 60 533250 3840 3888 3920 4000 2160 2163 2168 2222 0x48 0x9
[ 1298.545963] [drm:drm_mode_debug_printmodeline] Modeline 109:"3840x2160" 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5
[ 1298.545970] [drm:drm_mode_debug_printmodeline] Modeline 153:"3840x2160" 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5
[ 1298.545977] [drm:drm_mode_debug_printmodeline] Modeline 107:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9
[ 1298.545984] [drm:drm_mode_debug_printmodeline] Modeline 106:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[ 1298.545991] [drm:drm_mode_debug_printmodeline] Modeline 145:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[ 1298.545998] [drm:drm_mode_debug_printmodeline] Modeline 146:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[ 1298.546005] [drm:drm_mode_debug_printmodeline] Modeline 121:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[ 1298.546012] [drm:drm_mode_debug_printmodeline] Modeline 120:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
[ 1298.546019] [drm:drm_mode_debug_printmodeline] Modeline 137:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 1298.546026] [drm:drm_mode_debug_printmodeline] Modeline 119:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 1298.546033] [drm:drm_mode_debug_printmodeline] Modeline 129:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
[ 1298.546040] [drm:drm_mode_debug_printmodeline] Modeline 117:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6
[ 1298.546047] [drm:drm_mode_debug_printmodeline] Modeline 116:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 1298.546053] [drm:drm_mode_debug_printmodeline] Modeline 118:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[ 1298.546060] [drm:drm_mode_debug_printmodeline] Modeline 156:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[ 1298.546067] [drm:drm_mode_debug_printmodeline] Modeline 138:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 1298.546074] [drm:drm_mode_debug_printmodeline] Modeline 139:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 1298.546081] [drm:drm_mode_debug_printmodeline] Modeline 140:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 1298.546088] [drm:drm_mode_debug_printmodeline] Modeline 141:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 1298.546095] [drm:drm_mode_debug_printmodeline] Modeline 142:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 1298.546102] [drm:drm_mode_debug_printmodeline] Modeline 143:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 1298.546109] [drm:drm_mode_debug_printmodeline] Modeline 130:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 1298.546115] [drm:drm_mode_debug_printmodeline] Modeline 131:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 1298.546122] [drm:drm_mode_debug_printmodeline] Modeline 132:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 1298.546129] [drm:drm_mode_debug_printmodeline] Modeline 133:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
[ 1298.546136] [drm:drm_mode_debug_printmodeline] Modeline 134:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 1298.546143] [drm:drm_mode_debug_printmodeline] Modeline 157:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 1298.546149] [drm:drm_mode_debug_printmodeline] Modeline 135:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
[ 1298.546156] [drm:drm_mode_debug_printmodeline] Modeline 136:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 1298.546217] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-2]
[ 1298.546225] [drm:intel_hdmi_detect] [CONNECTOR:95:HDMI-A-2]
[ 1298.597065] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 2
[ 1298.607298] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[ 1298.607305] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[ 1298.607311] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1
[ 1298.617322] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[ 1298.617329] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0
[ 1298.668891] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 2
[ 1298.678909] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
[ 1298.678912] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-2] disconnected
[ 1298.679566] [drm:drm_mode_setcrtc] [CRTC:41:pipe A]
[ 1298.679572] [drm:drm_mode_setcrtc] [CONNECTOR:71:eDP-1]
[ 1298.718225] [drm:drm_mode_addfb2] [FB:103]
[ 1298.748921] [drm:drm_mode_setcrtc] [CRTC:55:pipe B]
[ 1298.748930] [drm:drm_mode_setcrtc] [CONNECTOR:90:DP-2]
[ 1298.748946] [drm:intel_atomic_check] [CONNECTOR:90:DP-2] checking for sink bpp constrains
[ 1298.748948] [drm:intel_atomic_check] clamping display bpp (was 36) to EDID reported max of 30
[ 1298.748953] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 533250KHz
[ 1298.748955] [drm:intel_dp_compute_config] DP lane count 4 clock 540000 bpp 30
[ 1298.748957] [drm:intel_dp_compute_config] DP link rate required 1999688 available 2160000
[ 1298.748967] [drm:intel_atomic_check] hw max bpp: 36, pipe bpp: 30, dithering: 0
[ 1298.748969] [drm:intel_dump_pipe_config] [CRTC:55:pipe B][modeset]
[ 1298.748972] [drm:intel_dump_pipe_config] output_types: DP (0x80)
[ 1298.748974] [drm:intel_dump_pipe_config] cpu_transcoder: B, pipe bpp: 30, dithering: 0
[ 1298.748976] [drm:intel_dump_m_n_config] dp m_n: lanes: 4; gmch_m: 7766016, gmch_n: 8388608, link_m: 1035468, link_n: 1048576, tu: 64
[ 1298.748978] [drm:intel_dump_pipe_config] audio: 1, infoframes: 0
[ 1298.748980] [drm:intel_dump_pipe_config] requested mode:
[ 1298.748983] [drm:drm_mode_debug_printmodeline] Modeline 0:"3840x2160" 60 533250 3840 3888 3920 4000 2160 2163 2168 2222 0x48 0x9
[ 1298.748985] [drm:intel_dump_pipe_config] adjusted mode:
[ 1298.748988] [drm:drm_mode_debug_printmodeline] Modeline 0:"3840x2160" 60 533250 3840 3888 3920 4000 2160 2163 2168 2222 0x48 0x9
[ 1298.748991] [drm:intel_dump_pipe_config] crtc timings: 533250 3840 3888 3920 4000 2160 2163 2168 2222, type: 0x48 flags: 0x9
[ 1298.748993] [drm:intel_dump_pipe_config] port clock: 540000, pipe src size: 3840x2160, pixel rate 533250
[ 1298.748995] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
[ 1298.748997] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1298.748999] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
[ 1298.749001] [drm:intel_dump_pipe_config] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0
[ 1298.749003] [drm:intel_dump_pipe_config] planes on this crtc
[ 1298.749005] [drm:intel_dump_pipe_config] [PLANE:42:plane 1B] disabled, scaler_id = -1
[ 1298.749007] [drm:intel_dump_pipe_config] [PLANE:47:plane 2B] disabled, scaler_id = -1
[ 1298.749008] [drm:intel_dump_pipe_config] [PLANE:52:cursor B] disabled, scaler_id = -1
[ 1298.749016] [drm:intel_atomic_check] New cdclk calculated to be logical 540000 kHz, actual 540000 kHz
[ 1298.749018] [drm:intel_atomic_check] New voltage level calculated to be logical 2, actual 2
[ 1298.749026] [drm:intel_find_shared_dpll] [CRTC:41:pipe A] allocated DPLL 0
[ 1298.749027] [drm:intel_reference_shared_dpll] using DPLL 0 for pipe A
[ 1298.749032] [drm:intel_find_shared_dpll] [CRTC:55:pipe B] allocated DPLL 1
[ 1298.749033] [drm:intel_reference_shared_dpll] using DPLL 1 for pipe B
[ 1298.750709] [drm:intel_psr_disable_locked] Disabling PSR1
[ 1298.750914] [drm:intel_edp_backlight_off]
[ 1298.956672] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
[ 1298.956792] [drm:intel_disable_pipe] disabling pipe A
[ 1298.970032] [drm:intel_edp_panel_off] Turn eDP port A panel power off
[ 1298.970141] [drm:intel_edp_panel_off] Wait for panel power off time
[ 1298.970322] [drm:wait_panel_status] mask b0000000 value 00000000 status a0000003 control 00000060
[ 1299.023835] [drm:wait_panel_status] Wait complete
[ 1299.023848] [drm:intel_power_well_disable] disabling DDI A/E IO power well
[ 1299.023861] [drm:__intel_fbc_disable] Disabling FBC on pipe A
[ 1299.023871] [drm:intel_disable_shared_dpll] disable DPLL 0 (active 1, on? 1) for crtc 41
[ 1299.023878] [drm:intel_disable_shared_dpll] disabling DPLL 0
[ 1299.023888] [drm:intel_power_well_enable] enabling power well 2
[ 1299.023915] [drm:intel_dump_cdclk_state] Changing CDCLK to 540000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 2
[ 1299.024344] [drm:intel_disable_sagv] Disabling the SAGV
[ 1299.024361] [drm:intel_atomic_commit_tail] [ENCODER:70:DDI A]
[ 1299.024366] [drm:intel_atomic_commit_tail] [ENCODER:78:DDI B]
[ 1299.024370] [drm:intel_atomic_commit_tail] [ENCODER:80:DP-MST A]
[ 1299.024375] [drm:intel_atomic_commit_tail] [ENCODER:81:DP-MST B]
[ 1299.024380] [drm:intel_atomic_commit_tail] [ENCODER:82:DP-MST C]
[ 1299.024384] [drm:intel_atomic_commit_tail] [ENCODER:89:DDI C]
[ 1299.024389] [drm:intel_atomic_commit_tail] [ENCODER:91:DP-MST A]
[ 1299.024393] [drm:intel_atomic_commit_tail] [ENCODER:92:DP-MST B]
[ 1299.024397] [drm:intel_atomic_commit_tail] [ENCODER:93:DP-MST C]
[ 1299.024403] [drm:verify_single_dpll_state] DPLL 0
[ 1299.024410] [drm:verify_single_dpll_state] DPLL 1
[ 1299.024417] [drm:verify_single_dpll_state] DPLL 2
[ 1299.024423] [drm:verify_single_dpll_state] DPLL 3
[ 1299.024431] [drm:intel_enable_shared_dpll] enable DPLL 0 (active 1, on? 0) for crtc 41
[ 1299.024434] [drm:intel_enable_shared_dpll] enabling DPLL 0
[ 1299.024445] [drm:edp_panel_on] Turn eDP port A panel power on
[ 1299.024491] [drm:wait_panel_power_cycle] Wait for panel power cycle
[ 1299.024706] [drm:gen8_de_irq_handler] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010
[ 1299.024731] [drm:intel_hpd_irq_handler] digital hpd port A - long
[ 1299.024754] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 4 - cnt: 0
[ 1299.024806] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A
[ 1299.636628] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000060
[ 1299.636669] [drm:wait_panel_status] Wait complete
[ 1299.636770] [drm:edp_panel_on] Wait for panel power on
[ 1299.636932] [drm:wait_panel_status] mask b000000f value 80000008 status 9000000a control 00000063
[ 1299.689138] [drm:gen8_de_irq_handler] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010
[ 1299.689148] [drm:intel_hpd_irq_handler] digital hpd port A - long
[ 1299.689156] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 4 - cnt: 1
[ 1299.689245] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A
[ 1299.846356] [drm:wait_panel_status] Wait complete
[ 1299.846372] [drm:intel_power_well_enable] enabling DDI A/E IO power well
[ 1299.846440] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[ 1299.846641] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
[ 1299.847493] [drm:intel_dp_start_link_train] Using LINK_BW_SET value 0a
[ 1299.847987] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[ 1299.847995] [drm:intel_dp_set_signal_levels] Using vswing level 0
[ 1299.848001] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
[ 1299.848010] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS1
[ 1299.848854] [drm:intel_dp_start_link_train] clock recovery OK
[ 1299.848862] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS2
[ 1299.850000] [drm:intel_dp_start_link_train] Channel EQ done. DP Training successful
[ 1299.850010] [drm:intel_dp_start_link_train] [CONNECTOR:71:eDP-1] Link Training Passed at Link Rate = 270000, Lane count = 2
[ 1299.850837] [drm:intel_enable_pipe] enabling pipe A
[ 1299.850861] [drm:intel_edp_backlight_on]
[ 1299.850867] [drm:intel_panel_enable_backlight] pipe A
[ 1299.850945] [drm:intel_panel_actually_set_backlight] set backlight PWM = 74559
[ 1299.851200] [drm:intel_psr_enable_locked] Enabling PSR1
[ 1299.851704] [drm:intel_enable_ddi] Panel doesn't support DRRS
[ 1299.851720] [drm:intel_fbc_enable] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1
[ 1299.851725] [drm:intel_fbc_enable] Enabling FBC on pipe A
[ 1299.867697] [drm:intel_enable_shared_dpll] enable DPLL 1 (active 2, on? 0) for crtc 55
[ 1299.867703] [drm:intel_enable_shared_dpll] enabling DPLL 1
[ 1299.867811] [drm:intel_power_well_enable] enabling DDI C IO power well
[ 1299.868603] [drm:intel_dp_start_link_train] Using LINK_BW_SET value 14
[ 1299.868946] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[ 1299.868951] [drm:intel_dp_set_signal_levels] Using vswing level 0
[ 1299.868956] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
[ 1299.868963] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS1
[ 1299.869655] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
[ 1299.869661] [drm:intel_dp_set_signal_levels] Using vswing level 1
[ 1299.869665] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
[ 1299.870357] [drm:intel_dp_set_signal_levels] Using signal levels 07000000
[ 1299.870362] [drm:intel_dp_set_signal_levels] Using vswing level 2
[ 1299.870368] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
[ 1299.871015] [drm:intel_dp_start_link_train] clock recovery OK
[ 1299.871021] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS3
[ 1299.871977] [drm:intel_dp_set_signal_levels] Using signal levels 08000000
[ 1299.871982] [drm:intel_dp_set_signal_levels] Using vswing level 2
[ 1299.871987] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1
[ 1299.872932] [drm:intel_dp_start_link_train] Channel EQ done. DP Training successful
[ 1299.873024] [drm:intel_dp_start_link_train] [CONNECTOR:90:DP-2] Link Training Passed at Link Rate = 540000, Lane count = 4
[ 1299.873775] [drm:intel_enable_pipe] enabling pipe B
[ 1299.873793] [drm:intel_enable_ddi] Panel doesn't support DRRS
[ 1299.873800] [drm:intel_audio_codec_enable] ELD on [CONNECTOR:90:DP-2], [ENCODER:89:DDI C]
[ 1299.873805] [drm:hsw_audio_codec_enable] Enable audio codec on pipe B, 32 bytes ELD
[ 1299.873817] [drm:hsw_audio_config_update] using Maud 512, Naud 11250
[ 1299.890587] [drm:verify_connector_state] [CONNECTOR:71:eDP-1]
[ 1299.890604] [drm:intel_atomic_commit_tail] [CRTC:41:pipe A]
[ 1299.890642] [drm:verify_single_dpll_state] DPLL 0
[ 1299.890680] [drm:verify_connector_state] [CONNECTOR:90:DP-2]
[ 1299.890691] [drm:intel_atomic_commit_tail] [CRTC:55:pipe B]
[ 1299.890719] [drm:verify_single_dpll_state] DPLL 1
[ 1299.995109] [drm:drm_mode_addfb2] [FB:144]
[ 1299.995115] [drm:drm_mode_addfb2] [FB:164]
[ 1300.009721] [drm:drm_mode_addfb2] [FB:165]
[ 1300.009728] [drm:drm_mode_addfb2] [FB:166]
[ 1300.063552] [drm:drm_mode_addfb2] [FB:167]
[ 1300.063556] [drm:drm_mode_addfb2] [FB:168]
[ 1300.070618] [drm:drm_mode_addfb2] [FB:169]
[ 1300.070621] [drm:drm_mode_addfb2] [FB:170]
[ 1300.082152] [drm:drm_mode_addfb2] [FB:171]
[ 1300.082155] [drm:drm_mode_addfb2] [FB:172]
[ 1301.890812] [drm:i915_audio_component_get_eld] Not valid for port B
[ 1301.890819] [drm:i915_audio_component_get_eld] Not valid for port B
[ 1301.890824] [drm:i915_audio_component_get_eld] Not valid for port B
[ 1301.890838] [drm:i915_audio_component_get_eld] Not valid for port C
[ 1301.890842] [drm:i915_audio_component_get_eld] Not valid for port C
[ 1301.890846] [drm:i915_audio_component_get_eld] Not valid for port D
[ 1301.890850] [drm:i915_audio_component_get_eld] Not valid for port D
[ 1301.890854] [drm:i915_audio_component_get_eld] Not valid for port D
[ 1301.891965] [drm:hsw_audio_config_update] using Maud 512, Naud 11250
[ 1302.898714] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
[ 1302.898892] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
[ 1320.237578] [drm:drm_mode_addfb2] [FB:103]
[ 1320.237768] [drm:drm_mode_addfb2] [FB:122]
[ 1320.237870] [drm:drm_mode_addfb2] [FB:144]
[ 1320.238037] [drm:drm_mode_addfb2] [FB:147]
[ 1320.238233] [drm:drm_mode_addfb2] [FB:148]
[ 1320.238384] [drm:drm_mode_addfb2] [FB:149]
[ 1320.238509] [drm:drm_mode_addfb2] [FB:150]
[ 1320.238640] [drm:drm_mode_addfb2] [FB:151]
[ 1320.238773] [drm:drm_mode_addfb2] [FB:152]
[ 1320.238932] [drm:drm_mode_addfb2] [FB:154]
[ 1320.239045] [drm:drm_mode_addfb2] [FB:155]
[ 1320.239145] [drm:drm_mode_addfb2] [FB:159]
[ 1320.239241] [drm:drm_mode_addfb2] [FB:160]