[ 0.000000] microcode: microcode updated early to revision 0x24, date = 2018-04-02 [ 0.000000] Linux version 5.0.0-g6e610bdc61f8 (grawity@frost) (gcc version 8.2.1 20181127 (GCC)) #1 SMP PREEMPT Fri Mar 8 11:43:14 EET 2019 [ 0.000000] Command line: initrd=\intel-ucode.img initrd=\EFI\custom\bisect.rd cryptdevice=PARTUUID=cf9d14dd-de5b-4e4e-9874-8badc535c98e:sys:allow-discards root=/dev/mapper/sys rw net.ifnames=0 quiet i915.fastboot=1 drm.debug=0x1e log_buf_len=4M emergency [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000094d5ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000094d60000-0x0000000095d5ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000095d60000-0x000000009a36efff] usable [ 0.000000] BIOS-e820: [mem 0x000000009a36f000-0x000000009aebefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x93ed0018-0x93ee0057] usable ==> usable [ 0.000000] e820: update [mem 0x93ed0018-0x93ee0057] usable ==> usable [ 0.000000] e820: update [mem 0x93ec3018-0x93ecf057] usable ==> usable [ 0.000000] e820: update [mem 0x93ec3018-0x93ecf057] usable ==> usable [ 0.000000] e820: update [mem 0x93ebb018-0x93ec2c57] usable ==> usable [ 0.000000] e820: update [mem 0x93ebb018-0x93ec2c57] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000087fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000093ebb017] usable [ 0.000000] reserve setup_data: [mem 0x0000000093ebb018-0x0000000093ec2c57] usable [ 0.000000] reserve setup_data: [mem 0x0000000093ec2c58-0x0000000093ec3017] usable [ 0.000000] reserve setup_data: [mem 0x0000000093ec3018-0x0000000093ecf057] usable [ 0.000000] reserve setup_data: [mem 0x0000000093ecf058-0x0000000093ed0017] usable [ 0.000000] reserve setup_data: [mem 0x0000000093ed0018-0x0000000093ee0057] usable [ 0.000000] reserve setup_data: [mem 0x0000000093ee0058-0x0000000094d5ffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000094d60000-0x0000000095d5ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000095d60000-0x000000009a36efff] usable [ 0.000000] reserve setup_data: [mem 0x000000009a36f000-0x000000009aebefff] reserved [ 0.000000] reserve setup_data: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000009afbf000-0x000000009affefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000009afff000-0x000000009affffff] usable [ 0.000000] reserve setup_data: [mem 0x000000009b000000-0x000000009f9fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe101000-0x00000000fe112fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000025f5fffff] usable [ 0.000000] efi: EFI v2.31 by INSYDE Corp. [ 0.000000] efi: ACPI=0x9affe000 ACPI 2.0=0x9affe014 SMBIOS=0x9aebef98 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. Inspiron 5547/06X5CY, BIOS A10 08/25/2016 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2594.184 MHz processor [ 0.000128] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000130] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000140] last_pfn = 0x25f600 max_arch_pfn = 0x400000000 [ 0.000145] MTRR default type: uncachable [ 0.000146] MTRR fixed ranges enabled: [ 0.000148] 00000-9FFFF write-back [ 0.000149] A0000-BFFFF uncachable [ 0.000150] C0000-E7FFF write-protect [ 0.000151] E8000-EFFFF write-combining [ 0.000151] F0000-FFFFF write-protect [ 0.000152] MTRR variable ranges enabled: [ 0.000154] 0 base 0000000000 mask 7F80000000 write-back [ 0.000155] 1 base 0080000000 mask 7FE0000000 write-back [ 0.000156] 2 base 009B000000 mask 7FFF000000 uncachable [ 0.000157] 3 base 009C000000 mask 7FFC000000 uncachable [ 0.000158] 4 base 00FFC00000 mask 7FFFC00000 write-protect [ 0.000159] 5 base 0100000000 mask 7F00000000 write-back [ 0.000160] 6 base 0200000000 mask 7F80000000 write-back [ 0.000161] 7 base 025F600000 mask 7FFFE00000 uncachable [ 0.000162] 8 base 025F800000 mask 7FFF800000 uncachable [ 0.000163] 9 base 0260000000 mask 7FE0000000 uncachable [ 0.001337] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001548] last_pfn = 0x9b000 max_arch_pfn = 0x400000000 [ 0.016073] check: Scanning 1 areas for low memory corruption [ 0.016077] Base memory trampoline at [(____ptrval____)] 82000 size 24576 [ 0.016081] Using GB pages for direct mapping [ 0.016083] BRK [0x113401000, 0x113401fff] PGTABLE [ 0.016085] BRK [0x113402000, 0x113402fff] PGTABLE [ 0.016087] BRK [0x113403000, 0x113403fff] PGTABLE [ 0.016146] BRK [0x113404000, 0x113404fff] PGTABLE [ 0.016148] BRK [0x113405000, 0x113405fff] PGTABLE [ 0.016462] BRK [0x113406000, 0x113406fff] PGTABLE [ 0.016540] BRK [0x113407000, 0x113407fff] PGTABLE [ 0.016633] BRK [0x113408000, 0x113408fff] PGTABLE [ 0.016773] BRK [0x113409000, 0x113409fff] PGTABLE [ 0.016861] BRK [0x11340a000, 0x11340afff] PGTABLE [ 0.017236] printk: log_buf_len: 4194304 bytes [ 0.017237] printk: early log buf free: 123204(93%) [ 0.017238] Secure boot disabled [ 0.017239] RAMDISK: [mem 0x7ef7a000-0x7fffefff] [ 0.017245] ACPI: Early table checksum verification disabled [ 0.017249] ACPI: RSDP 0x000000009AFFE014 000024 (v02 DELL ) [ 0.017253] ACPI: XSDT 0x000000009AFFE210 0000B4 (v01 DELL CL09 00000001 01000013) [ 0.017259] ACPI: FACP 0x000000009AFF9000 00010C (v05 DELL CL09 00000001 ASL 00040000) [ 0.017266] ACPI: DSDT 0x000000009AFE7000 00E06E (v01 DELL CL09 00000000 ASL 00040000) [ 0.017269] ACPI: FACS 0x000000009AFB8000 000040 [ 0.017272] ACPI: UEFI 0x000000009AFFD000 000236 (v01 DELL CL09 00000001 ASL 00040000) [ 0.017275] ACPI: FPDT 0x000000009AFFB000 000044 (v01 DELL CL09 00000001 ASL 00040000) [ 0.017278] ACPI: ASF! 0x000000009AFFA000 0000A5 (v32 DELL CL09 00000001 ASL 00040000) [ 0.017282] ACPI: HPET 0x000000009AFF8000 000038 (v01 DELL CL09 00000001 ASL 00040000) [ 0.017285] ACPI: APIC 0x000000009AFF7000 00008C (v03 DELL CL09 00000001 ASL 00040000) [ 0.017288] ACPI: MCFG 0x000000009AFF6000 00003C (v01 DELL CL09 00000001 ASL 00040000) [ 0.017291] ACPI: SSDT 0x000000009AFE6000 0006FE (v01 COMPAL CRV ORB 00001000 ACPI 00040000) [ 0.017294] ACPI: BOOT 0x000000009AFE4000 000028 (v01 DELL CL09 00000001 ASL 00040000) [ 0.017297] ACPI: LPIT 0x000000009AFE3000 000094 (v01 DELL CL09 00000000 ASL 00040000) [ 0.017300] ACPI: ASPT 0x000000009AFE1000 000034 (v07 DELL CL09 00000001 ASL 00040000) [ 0.017304] ACPI: DBGP 0x000000009AFE0000 000034 (v01 DELL CL09 00000001 ASL 00040000) [ 0.017307] ACPI: SSDT 0x000000009AFDA000 000539 (v01 COMPAL CRV ORB 00003000 ACPI 00040000) [ 0.017310] ACPI: SSDT 0x000000009AFD9000 000AD8 (v01 COMPAL CRV ORB 00003000 ACPI 00040000) [ 0.017313] ACPI: SSDT 0x000000009AFD5000 00355E (v01 COMPAL CRV ORB 00003000 ACPI 00040000) [ 0.017316] ACPI: SSDT 0x000000009AFD0000 002250 (v01 COMPAL CRV ORB 00001000 ACPI 00040000) [ 0.017320] ACPI: CSRT 0x000000009AFD3000 0000C4 (v01 DELL CL09 00000001 ASL 00040000) [ 0.017323] ACPI: BGRT 0x000000009AFD4000 000038 (v01 DELL CL09 00000001 ASL 00040000) [ 0.017333] ACPI: Local APIC address 0xfee00000 [ 0.017427] No NUMA configuration found [ 0.017428] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff] [ 0.017432] NODE_DATA(0) allocated [mem 0x25f1fc000-0x25f1fffff] [ 0.017458] Zone ranges: [ 0.017459] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.017461] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.017462] Normal [mem 0x0000000100000000-0x000000025f5fffff] [ 0.017463] Device empty [ 0.017464] Movable zone start for each node [ 0.017465] Early memory node ranges [ 0.017466] node 0: [mem 0x0000000000001000-0x000000000006efff] [ 0.017467] node 0: [mem 0x0000000000070000-0x0000000000087fff] [ 0.017467] node 0: [mem 0x0000000000100000-0x0000000094d5ffff] [ 0.017468] node 0: [mem 0x0000000095d60000-0x000000009a36efff] [ 0.017469] node 0: [mem 0x000000009afff000-0x000000009affffff] [ 0.017470] node 0: [mem 0x0000000100000000-0x000000025f5fffff] [ 0.018005] Zeroed struct page in unavailable ranges: 27914 pages [ 0.018006] Initmem setup node 0 [mem 0x0000000000001000-0x000000025f5fffff] [ 0.018008] On node 0 totalpages: 2066678 [ 0.018009] DMA zone: 64 pages used for memmap [ 0.018010] DMA zone: 21 pages reserved [ 0.018011] DMA zone: 3974 pages, LIFO batch:0 [ 0.018133] DMA32 zone: 9742 pages used for memmap [ 0.018134] DMA32 zone: 623472 pages, LIFO batch:63 [ 0.038291] Normal zone: 22488 pages used for memmap [ 0.038293] Normal zone: 1439232 pages, LIFO batch:63 [ 0.079842] Reserving Intel graphics memory at [mem 0x9ba00000-0x9f9fffff] [ 0.079929] ACPI: PM-Timer IO Port: 0x1808 [ 0.079931] ACPI: Local APIC address 0xfee00000 [ 0.079949] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.079951] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.079953] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.079954] ACPI: IRQ0 used by override. [ 0.079956] ACPI: IRQ9 used by override. [ 0.079958] Using ACPI (MADT) for SMP configuration information [ 0.079960] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.079972] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.079995] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.079997] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff] [ 0.079999] PM: Registered nosave memory: [mem 0x00088000-0x000bffff] [ 0.079999] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff] [ 0.080001] PM: Registered nosave memory: [mem 0x93ebb000-0x93ebbfff] [ 0.080003] PM: Registered nosave memory: [mem 0x93ec2000-0x93ec2fff] [ 0.080004] PM: Registered nosave memory: [mem 0x93ec3000-0x93ec3fff] [ 0.080006] PM: Registered nosave memory: [mem 0x93ecf000-0x93ecffff] [ 0.080007] PM: Registered nosave memory: [mem 0x93ed0000-0x93ed0fff] [ 0.080008] PM: Registered nosave memory: [mem 0x93ee0000-0x93ee0fff] [ 0.080010] PM: Registered nosave memory: [mem 0x94d60000-0x95d5ffff] [ 0.080012] PM: Registered nosave memory: [mem 0x9a36f000-0x9aebefff] [ 0.080013] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff] [ 0.080014] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff] [ 0.080015] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff] [ 0.080016] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff] [ 0.080017] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.080018] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff] [ 0.080018] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff] [ 0.080019] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff] [ 0.080020] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff] [ 0.080021] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff] [ 0.080021] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.080022] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.080023] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff] [ 0.080023] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.080024] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.080027] [mem 0x9fa00000-0xdfffffff] available for PCI devices [ 0.080028] Booting paravirtualized kernel on bare hardware [ 0.080031] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.223641] random: get_random_bytes called from start_kernel+0x95/0x538 with crng_init=0 [ 0.223649] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1 [ 0.223921] percpu: Embedded 45 pages/cpu @(____ptrval____) s147456 r8192 d28672 u262144 [ 0.223930] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152 [ 0.223931] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.223954] Built 1 zonelists, mobility grouping on. Total pages: 2034363 [ 0.223955] Policy zone: Normal [ 0.223957] Kernel command line: initrd=\intel-ucode.img initrd=\EFI\custom\bisect.rd cryptdevice=PARTUUID=cf9d14dd-de5b-4e4e-9874-8badc535c98e:sys:allow-discards root=/dev/mapper/sys rw net.ifnames=0 quiet i915.fastboot=1 drm.debug=0x1e log_buf_len=4M emergency [ 0.228699] Calgary: detecting Calgary via BIOS EBDA area [ 0.228700] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.252767] Memory: 7952456K/8266712K available (12291K kernel code, 1285K rwdata, 3724K rodata, 1536K init, 3904K bss, 314256K reserved, 0K cma-reserved) [ 0.252960] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.252966] Kernel/User page tables isolation: enabled [ 0.252982] ftrace: allocating 35896 entries in 141 pages [ 0.271031] rcu: Preemptible hierarchical RCU implementation. [ 0.271032] rcu: CONFIG_RCU_FANOUT set to non-default value of 32. [ 0.271033] rcu: RCU dyntick-idle grace-period acceleration is enabled. [ 0.271034] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8. [ 0.271035] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.271036] Tasks RCU enabled. [ 0.271037] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.271038] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.272939] NR_IRQS: 20736, nr_irqs: 760, preallocated irqs: 16 [ 0.273144] rcu: Offload RCU callbacks from CPUs: (none). [ 0.273196] Console: colour dummy device 80x25 [ 0.273203] printk: console [tty0] enabled [ 0.273224] ACPI: Core revision 20181213 [ 0.273483] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.273491] hpet clockevent registered [ 0.273495] APIC: Switch to symmetric I/O mode setup [ 0.274140] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.290163] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2564c60e5a5, max_idle_ns: 440795287677 ns [ 0.290178] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.55 BogoMIPS (lpj=8647280) [ 0.290180] pid_max: default: 32768 minimum: 301 [ 0.296872] LSM: Security Framework initializing [ 0.296874] Yama: becoming mindful. [ 0.296880] AppArmor: AppArmor disabled by boot time parameter [ 0.300408] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.301064] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.301103] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.301124] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.301393] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.301394] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.301400] mce: CPU supports 7 MCE banks [ 0.301417] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.301430] process: using mwait in idle threads [ 0.301433] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.301434] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.301437] Spectre V2 : Mitigation: Full generic retpoline [ 0.301437] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.301438] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.301447] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.301448] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.301450] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.301656] Freeing SMP alternatives memory: 28K [ 0.303576] TSC deadline timer enabled [ 0.303578] smpboot: CPU0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz (family: 0x6, model: 0x45, stepping: 0x1) [ 0.316849] mce: [Hardware Error]: Machine check events logged [ 0.316851] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 5: ae0000000040110a [ 0.316857] mce: [Hardware Error]: TSC 0 ADDR ffb070c0 MISC 38a0000086 [ 0.316862] mce: [Hardware Error]: PROCESSOR 0:40651 TIME 1552397102 SOCKET 0 APIC 0 microcode 24 [ 0.323506] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.323561] ... version: 3 [ 0.323562] ... bit width: 48 [ 0.323563] ... generic registers: 4 [ 0.323564] ... value mask: 0000ffffffffffff [ 0.323565] ... max period: 00007fffffffffff [ 0.323565] ... fixed-purpose events: 3 [ 0.323566] ... event mask: 000000070000000f [ 0.330168] rcu: Hierarchical SRCU implementation. [ 0.350813] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.356838] smp: Bringing up secondary CPUs ... [ 0.396849] x86: Booting SMP configuration: [ 0.396850] .... node #0, CPUs: #1 #2 #3 [ 0.477338] smp: Brought up 1 node, 4 CPUs [ 0.477338] smpboot: Max logical packages: 2 [ 0.477338] smpboot: Total of 4 processors activated (20761.20 BogoMIPS) [ 0.480436] devtmpfs: initialized [ 0.480436] x86/mm: Memory block size: 128MB [ 0.481005] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes) [ 0.481005] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.481005] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.481005] pinctrl core: initialized pinctrl subsystem [ 0.481005] RTC time: 13:25:03, date: 2019-03-12 [ 0.481005] NET: Registered protocol family 16 [ 0.481005] audit: initializing netlink subsys (disabled) [ 0.481005] audit: type=2000 audit(1552397102.206:1): state=initialized audit_enabled=0 res=1 [ 0.481005] cpuidle: using governor ladder [ 0.483507] cpuidle: using governor menu [ 0.483560] Simple Boot Flag at 0x44 set to 0x1 [ 0.483591] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.483592] ACPI: bus type PCI registered [ 0.483594] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.483667] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.483682] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.483682] PCI: Using configuration type 1 for base access [ 0.483682] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.484827] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.484827] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.484827] fbcon: Taking over console [ 0.484827] ipmi:dmi: Base address is zero, assuming no IPMI interface [ 0.484827] ACPI: Added _OSI(Module Device) [ 0.484827] ACPI: Added _OSI(Processor Device) [ 0.484827] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.484827] ACPI: Added _OSI(Processor Aggregator Device) [ 0.484827] ACPI: Added _OSI(Linux-Dell-Video) [ 0.484827] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.484827] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.504095] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.508003] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.509496] ACPI: Dynamic OEM Table Load: [ 0.509504] ACPI: SSDT 0xFFFF94309560B800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20130117) [ 0.509822] ACPI: Dynamic OEM Table Load: [ 0.509822] ACPI: SSDT 0xFFFF943095465800 0005AA (v01 PmRef ApIst 00003000 INTL 20130117) [ 0.510326] ACPI: Dynamic OEM Table Load: [ 0.510333] ACPI: SSDT 0xFFFF943095683E00 000119 (v01 PmRef ApCst 00003000 INTL 20130117) [ 0.511493] ACPI: EC: EC started [ 0.511494] ACPI: EC: interrupt blocked [ 0.670192] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.670195] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.670196] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 0.670197] ACPI: Interpreter enabled [ 0.670240] ACPI: (supports S0 S3 S4 S5) [ 0.670241] ACPI: Using IOAPIC for interrupt routing [ 0.670280] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.670808] ACPI: Enabled 9 GPEs in block 00 to 7F [ 0.680598] ACPI: Power Resource [AMD3] (on) [ 0.680634] ACPI: Power Resource [AMD2] (on) [ 0.687564] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.687571] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.688414] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.688416] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.689137] PCI host bridge to bus 0000:00 [ 0.689140] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.689142] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.689144] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.689145] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.689147] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.689149] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.689150] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.689152] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.689153] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.689155] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.689157] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.689158] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.689160] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.689161] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.689163] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.689165] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] [ 0.689166] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window] [ 0.689169] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.689178] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 0.689393] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 [ 0.689407] pci 0000:00:02.0: reg 0x10: [mem 0xb0400000-0xb07fffff 64bit] [ 0.689414] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.689420] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 0.689435] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.689630] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 0.689643] pci 0000:00:03.0: reg 0x10: [mem 0xb0c10000-0xb0c13fff 64bit] [ 0.689876] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 0.689898] pci 0000:00:14.0: reg 0x10: [mem 0xb0c00000-0xb0c0ffff 64bit] [ 0.689958] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.690150] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 [ 0.690177] pci 0000:00:16.0: reg 0x10: [mem 0xb0c18000-0xb0c1801f 64bit] [ 0.690249] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.690450] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 0.690470] pci 0000:00:1b.0: reg 0x10: [mem 0xb0c14000-0xb0c17fff 64bit] [ 0.690540] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.690729] pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400 [ 0.690807] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.691076] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400 [ 0.691153] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.691417] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400 [ 0.691494] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.691701] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 [ 0.693461] pci 0000:00:1d.0: reg 0x10: [mem 0xb0c1c000-0xb0c1c3ff] [ 0.698186] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.698389] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 [ 0.698689] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 [ 0.698706] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f] [ 0.698713] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097] [ 0.698720] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087] [ 0.698727] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093] [ 0.698734] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f] [ 0.698742] pci 0000:00:1f.2: reg 0x24: [mem 0xb0c1b000-0xb0c1b7ff] [ 0.698778] pci 0000:00:1f.2: PME# supported from D3hot [ 0.698963] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 [ 0.698982] pci 0000:00:1f.3: reg 0x10: [mem 0xb0c19000-0xb0c190ff 64bit] [ 0.699001] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f] [ 0.699278] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000 [ 0.699317] pci 0000:01:00.0: reg 0x10: [io 0x4000-0x40ff] [ 0.699351] pci 0000:01:00.0: reg 0x18: [mem 0xb0b00000-0xb0b00fff 64bit] [ 0.699373] pci 0000:01:00.0: reg 0x20: [mem 0xb0800000-0xb0803fff 64bit pref] [ 0.699493] pci 0000:01:00.0: supports D1 D2 [ 0.699495] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.699646] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.699649] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.699653] pci 0000:00:1c.0: bridge window [mem 0xb0b00000-0xb0bfffff] [ 0.699658] pci 0000:00:1c.0: bridge window [mem 0xb0800000-0xb08fffff 64bit pref] [ 0.699749] pci 0000:02:00.0: [8086:08b3] type 00 class 0x028000 [ 0.699817] pci 0000:02:00.0: reg 0x10: [mem 0xb0a00000-0xb0a01fff 64bit] [ 0.700036] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.700231] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.700237] pci 0000:00:1c.3: bridge window [mem 0xb0a00000-0xb0afffff] [ 0.700329] pci 0000:03:00.0: [1002:6900] type 00 class 0x038000 [ 0.700388] pci 0000:03:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.700411] pci 0000:03:00.0: reg 0x18: [mem 0xb0000000-0xb01fffff 64bit pref] [ 0.700425] pci 0000:03:00.0: reg 0x20: [io 0x3000-0x30ff] [ 0.700439] pci 0000:03:00.0: reg 0x24: [mem 0xb0900000-0xb093ffff] [ 0.700453] pci 0000:03:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.700467] pci 0000:03:00.0: enabling Extended Tags [ 0.700603] pci 0000:03:00.0: supports D1 D2 [ 0.700669] pci 0000:03:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 63.008 Gb/s with 8 GT/s x8 link) [ 0.700783] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.700786] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.700790] pci 0000:00:1c.4: bridge window [mem 0xb0900000-0xb09fffff] [ 0.700794] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xb01fffff 64bit pref] [ 0.782057] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.782137] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.782217] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.782295] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.782372] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.782449] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.782526] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.782603] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.783562] ACPI: EC: interrupt unblocked [ 0.783573] ACPI: EC: event unblocked [ 0.783580] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.783582] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.783683] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.783683] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.783683] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.783683] vgaarb: loaded [ 0.783683] ACPI: bus type USB registered [ 0.783683] usbcore: registered new interface driver usbfs [ 0.783683] usbcore: registered new interface driver hub [ 0.783704] usbcore: registered new device driver usb [ 0.968770] pps_core: LinuxPPS API ver. 1 registered [ 0.968771] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.968774] PTP clock support registered [ 0.968782] EDAC MC: Ver: 3.0.0 [ 0.968870] Registered efivars operations [ 1.157339] PCI: Using ACPI for IRQ routing [ 1.163444] PCI: pci_cache_line_size set to 64 bytes [ 1.163512] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff] [ 1.163513] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff] [ 1.163515] e820: reserve RAM buffer [mem 0x93ebb018-0x93ffffff] [ 1.163516] e820: reserve RAM buffer [mem 0x93ec3018-0x93ffffff] [ 1.163518] e820: reserve RAM buffer [mem 0x93ed0018-0x93ffffff] [ 1.163519] e820: reserve RAM buffer [mem 0x94d60000-0x97ffffff] [ 1.163520] e820: reserve RAM buffer [mem 0x9a36f000-0x9bffffff] [ 1.163522] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff] [ 1.163523] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff] [ 1.163637] NetLabel: Initializing [ 1.163638] NetLabel: domain hash size = 128 [ 1.163638] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.163654] NetLabel: unlabeled traffic allowed by default [ 1.163912] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.163918] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.165942] clocksource: Switched to clocksource tsc-early [ 1.175659] VFS: Disk quotas dquot_6.6.0 [ 1.175682] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.175765] pnp: PnP ACPI init [ 1.175962] system 00:00: [io 0x0680-0x069f] has been reserved [ 1.175967] system 00:00: [io 0xfd60-0xfd63] has been reserved [ 1.175969] system 00:00: [io 0xffff] has been reserved [ 1.175971] system 00:00: [io 0xffff] has been reserved [ 1.175972] system 00:00: [io 0xffff] has been reserved [ 1.175979] system 00:00: [io 0x1800-0x18fe] has been reserved [ 1.175981] system 00:00: [io 0x164e-0x164f] has been reserved [ 1.175988] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.176053] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.176121] system 00:02: [io 0x1854-0x1857] has been reserved [ 1.176126] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 1.176178] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.176209] pnp 00:04: Plug and Play ACPI device, IDs DLL063f PNP0f13 (active) [ 1.253735] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.253738] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.253740] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.253742] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.253745] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 1.253747] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.253749] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 1.253751] system 00:05: [mem 0xff000000-0xff000fff] has been reserved [ 1.253753] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved [ 1.253755] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.253757] system 00:05: [mem 0x9fa21000-0x9fa21fff] has been reserved [ 1.253759] system 00:05: [mem 0x9fa10000-0x9fa1ffff] has been reserved [ 1.253764] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.254223] system 00:06: [mem 0xb0c1f000-0xb0c1ffff] has been reserved [ 1.254226] system 00:06: [mem 0xb0c1d000-0xb0c1dfff] has been reserved [ 1.254230] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.255323] pnp: PnP ACPI: found 7 devices [ 1.261298] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.261304] pci 0000:03:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 1.261329] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.261332] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 1.261336] pci 0000:00:1c.0: bridge window [mem 0xb0b00000-0xb0bfffff] [ 1.261340] pci 0000:00:1c.0: bridge window [mem 0xb0800000-0xb08fffff 64bit pref] [ 1.261346] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 1.261350] pci 0000:00:1c.3: bridge window [mem 0xb0a00000-0xb0afffff] [ 1.261360] pci 0000:03:00.0: BAR 6: assigned [mem 0xb0940000-0xb095ffff pref] [ 1.261362] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 1.261365] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 1.261369] pci 0000:00:1c.4: bridge window [mem 0xb0900000-0xb09fffff] [ 1.261372] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xb01fffff 64bit pref] [ 1.261379] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.261381] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.261383] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.261384] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 1.261386] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 1.261388] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 1.261390] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 1.261392] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 1.261393] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 1.261395] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 1.261397] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 1.261398] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 1.261400] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 1.261402] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 1.261404] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 1.261405] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] [ 1.261407] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff window] [ 1.261409] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 1.261411] pci_bus 0000:01: resource 1 [mem 0xb0b00000-0xb0bfffff] [ 1.261412] pci_bus 0000:01: resource 2 [mem 0xb0800000-0xb08fffff 64bit pref] [ 1.261414] pci_bus 0000:02: resource 1 [mem 0xb0a00000-0xb0afffff] [ 1.261416] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 1.261418] pci_bus 0000:03: resource 1 [mem 0xb0900000-0xb09fffff] [ 1.261419] pci_bus 0000:03: resource 2 [mem 0xa0000000-0xb01fffff 64bit pref] [ 1.261618] NET: Registered protocol family 2 [ 1.261783] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) [ 1.261819] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.261939] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.262066] TCP: Hash tables configured (established 65536 bind 65536) [ 1.262105] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.262132] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.262201] NET: Registered protocol family 1 [ 1.262206] NET: Registered protocol family 44 [ 1.262216] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.280303] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6ad took 16225 usecs [ 1.280336] PCI: CLS 64 bytes, default 64 [ 1.280376] Unpacking initramfs... [ 1.565798] Freeing initrd memory: 16916K [ 1.565811] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.565813] software IO TLB: mapped [mem 0x8ed70000-0x92d70000] (64MB) [ 1.566005] check: Scanning for low memory corruption every 60 seconds [ 1.566696] Initialise system trusted keyrings [ 1.566707] Key type blacklist registered [ 1.566762] workingset: timestamp_bits=41 max_order=21 bucket_order=0 [ 1.568281] zbud: loaded [ 1.618500] Key type asymmetric registered [ 1.618501] Asymmetric key parser 'x509' registered [ 1.618515] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.618561] io scheduler mq-deadline registered [ 1.618562] io scheduler kyber registered [ 1.618620] io scheduler bfq registered [ 1.619077] pcieport 0000:00:1c.0: Signaling PME with IRQ 40 [ 1.619297] pcieport 0000:00:1c.3: Signaling PME with IRQ 41 [ 1.619502] pcieport 0000:00:1c.4: Signaling PME with IRQ 42 [ 1.619561] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.619655] efifb: probing for efifb [ 1.619673] efifb: showing boot graphics [ 1.620329] efifb: framebuffer at 0xc0000000, using 4128k, total 4128k [ 1.620331] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 1.620331] efifb: scrolling: redraw [ 1.620333] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.620439] Console: switching to colour frame buffer device 170x48 [ 1.623422] fb0: EFI VGA frame buffer device [ 1.623434] intel_idle: MWAIT substates: 0x11142120 [ 1.623435] intel_idle: v0.4.1 model 0x45 [ 1.623783] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.623851] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input0 [ 1.626882] ACPI: Lid Switch [LID0] [ 1.626939] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input1 [ 1.626949] ACPI: Power Button [PWRB] [ 1.626985] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input2 [ 1.626993] ACPI: Sleep Button [SLPB] [ 1.627063] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.630199] ACPI: Power Button [PWRF] [ 1.634708] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.636202] usbcore: registered new interface driver usbserial_generic [ 1.636207] usbserial: USB Serial support registered for generic [ 1.636227] rtc_cmos 00:01: RTC can wake from S4 [ 1.636386] rtc_cmos 00:01: registered as rtc0 [ 1.636405] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.636469] intel_pstate: Intel P-state driver initializing [ 1.636687] ledtrig-cpu: registered to indicate activity on CPUs [ 1.637340] NET: Registered protocol family 10 [ 1.653025] Segment Routing with IPv6 [ 1.653053] NET: Registered protocol family 17 [ 1.653363] RAS: Correctable Errors collector initialized. [ 1.653408] microcode: sig=0x40651, pf=0x40, revision=0x24 [ 1.653481] microcode: Microcode Update Driver: v2.2. [ 1.653494] sched_clock: Marking stable (1653145013, 331172)->(1680793763, -27317578) [ 1.653827] registered taskstats version 1 [ 1.653834] Loading compiled-in X.509 certificates [ 1.658643] Loaded X.509 cert 'Build time autogenerated kernel key: cd6f57e1a8bb7c4a7d7f272a6036a4ed855f260e' [ 1.658667] zswap: loaded using pool lzo/zbud [ 1.667956] Key type big_key registered [ 1.668637] Magic number: 11:634:432 [ 1.668766] rtc_cmos 00:01: setting system clock to 2019-03-12T13:25:04 UTC (1552397104) [ 1.670254] Freeing unused decrypted memory: 2040K [ 1.670662] Freeing unused kernel image memory: 1536K [ 1.700304] Write protecting the kernel read-only data: 18432k [ 1.701095] Freeing unused kernel image memory: 2016K [ 1.701273] Freeing unused kernel image memory: 372K [ 1.714732] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.714733] x86/mm: Checking user space page tables [ 1.722337] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.722338] Run /init as init process [ 2.118918] Linux agpgart interface v0.103 [ 2.185588] [drm:intel_pch_type [i915]] Found LynxPoint LP PCH [ 2.185619] [drm:i915_driver_load [i915]] WOPCM size: 1024KiB [ 2.185657] [drm:intel_uc_init_early [i915]] enable_guc=0 (submission:no huc:no) [ 2.185693] [drm:i915_driver_load [i915]] guc_log_level=0 (enabled:no, verbose:no, verbosity:0) [ 2.185738] [drm:intel_power_domains_init [i915]] Allowed DC state mask 00 [ 2.185866] [drm:i915_ggtt_probe_hw [i915]] GGTT size = 2048M [ 2.185897] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M [ 2.185931] [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M [ 2.185933] checking generic (c0000000 408000) vs hw (c0000000 10000000) [ 2.185934] fb0: switching to inteldrmfb from EFI VGA [ 2.185951] Console: switching to colour dummy device 80x25 [ 2.186026] i915 0000:00:02.0: vgaarb: deactivate vga console [ 2.186074] [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 9f900017 [ 2.186118] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K [ 2.186219] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params [ 2.186258] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x9afb2018 [ 2.186302] [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 [ 2.186340] [drm:intel_opregion_setup [i915]] Public ACPI methods supported [ 2.186378] [drm:intel_opregion_setup [i915]] SWSCI supported [ 2.187346] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 [ 2.187380] [drm:intel_opregion_setup [i915]] ASLE supported [ 2.187413] [drm:intel_opregion_setup [i915]] ASLE extension supported [ 2.187447] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 2.187448] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.187449] [drm] Driver supports precise vblank timestamp query. [ 2.187484] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz [ 2.187541] [drm:intel_bios_init [i915]] VBT signature "$VBT HASWELL ", BDB version 177 [ 2.187596] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 2.187650] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 0 [ 2.188381] [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) [ 2.188434] [drm:intel_bios_init [i915]] Panel type: 2 (VBT) [ 2.188488] [drm:intel_bios_init [i915]] DRRS supported mode is seamless [ 2.188543] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables: [ 2.188563] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 2.188617] [drm:intel_bios_init [i915]] VBT initial LVDS value 300 [ 2.188671] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 13, level 255, controller 0 [ 2.188726] [drm:intel_bios_init [i915]] Found SDVO panel mode in BIOS VBT tables: [ 2.188743] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1600x1200": 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 2.188797] [drm:intel_bios_init [i915]] DRRS State Enabled:0 [ 2.188851] [drm:intel_bios_init [i915]] No SDVO device info is found in VBT [ 2.188906] [drm:intel_bios_init [i915]] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 TCUSB:0 TBT:0 [ 2.188960] [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0 [ 2.189015] [drm:intel_bios_init [i915]] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 TCUSB:0 TBT:0 [ 2.189069] [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 6 [ 2.189131] [drm:intel_dsm_detect [i915]] no _DSM method for intel device [ 2.189176] [drm:i915_driver_load [i915]] rawclk rate: 24000 kHz [ 2.189221] [drm:intel_power_well_enable [i915]] enabling always-on [ 2.189264] [drm:intel_power_well_enable [i915]] enabling display [ 2.189269] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.189707] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 [ 2.189751] [drm:intel_print_wm_latency [i915]] Primary WM0 latency 20 (2.0 usec) [ 2.189793] [drm:intel_print_wm_latency [i915]] Primary WM1 latency 4 (2.0 usec) [ 2.189833] [drm:intel_print_wm_latency [i915]] Primary WM2 latency 36 (18.0 usec) [ 2.189860] [drm:intel_print_wm_latency [i915]] Primary WM3 latency 90 (45.0 usec) [ 2.189890] [drm:intel_print_wm_latency [i915]] Primary WM4 latency 160 (80.0 usec) [ 2.189921] [drm:intel_print_wm_latency [i915]] Sprite WM0 latency 20 (2.0 usec) [ 2.189952] [drm:intel_print_wm_latency [i915]] Sprite WM1 latency 4 (2.0 usec) [ 2.189983] [drm:intel_print_wm_latency [i915]] Sprite WM2 latency 36 (18.0 usec) [ 2.190014] [drm:intel_print_wm_latency [i915]] Sprite WM3 latency 90 (45.0 usec) [ 2.190044] [drm:intel_print_wm_latency [i915]] Sprite WM4 latency 160 (80.0 usec) [ 2.190075] [drm:intel_print_wm_latency [i915]] Cursor WM0 latency 20 (2.0 usec) [ 2.190105] [drm:intel_print_wm_latency [i915]] Cursor WM1 latency 4 (2.0 usec) [ 2.190136] [drm:intel_print_wm_latency [i915]] Cursor WM2 latency 36 (18.0 usec) [ 2.190167] [drm:intel_print_wm_latency [i915]] Cursor WM3 latency 90 (45.0 usec) [ 2.190204] [drm:intel_print_wm_latency [i915]] Cursor WM4 latency 160 (80.0 usec) [ 2.190244] [drm:intel_modeset_init [i915]] 3 display pipes available. [ 2.190319] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 450000 kHz, VCO 0 kHz, ref 0 kHz, bypass 0 kHz, voltage level 0 [ 2.190354] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 450000 kHz [ 2.190389] [drm:intel_modeset_init [i915]] Max dotclock rate: 450000 kHz [ 2.190728] [drm:intel_bios_port_aux_ch [i915]] using AUX A for port A (VBT) [ 2.190762] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port A [ 2.190804] [drm:intel_pps_dump_state [i915]] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000 [ 2.190839] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 2.190873] [drm:intel_dp_init_panel_power_sequencer [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 [ 2.190907] [drm:intel_dp_init_panel_power_sequencer [i915]] backlight on delay 1, off delay 200 [ 2.190945] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 2.190982] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on [ 2.191020] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f [ 2.191660] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 81 41 00 00 01 00 02 00 00 00 00 00 00 [ 2.192211] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 2.192632] [drm:intel_dp_init_connector [i915]] eDP DPCD: 01 00 04 [ 2.198527] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 2.198548] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 2.198566] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 2.198600] [drm:intel_dp_init_connector [i915]] VBT doesn't support DRRS [ 2.198635] [drm:lpt_setup_backlight [i915]] CPU backlight register was enabled, switching to PCH override [ 2.198669] [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, enabled, brightness 937/937 [ 2.198709] [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (platform default) [ 2.198743] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B [ 2.198777] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT) [ 2.198817] [drm:intel_modeset_init [i915]] VBT says port C is not DVI/HDMI/DP compatible, respect it [ 2.198919] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:41:pipe A] hw state readout: enabled [ 2.198955] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:53:pipe B] hw state readout: disabled [ 2.198991] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:65:pipe C] hw state readout: disabled [ 2.199027] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:30:primary A] hw state readout: enabled, pipe A [ 2.199063] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:sprite A] hw state readout: disabled, pipe A [ 2.199099] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:38:cursor A] hw state readout: disabled, pipe A [ 2.199135] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:primary B] hw state readout: disabled, pipe B [ 2.199171] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:45:sprite B] hw state readout: disabled, pipe B [ 2.199207] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:50:cursor B] hw state readout: disabled, pipe B [ 2.199244] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:54:primary C] hw state readout: disabled, pipe C [ 2.199280] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:sprite C] hw state readout: disabled, pipe C [ 2.199315] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:62:cursor C] hw state readout: disabled, pipe C [ 2.199351] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0 [ 2.199387] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 2.199423] [drm:intel_modeset_setup_hw_state [i915]] SPLL hw state readout: crtc_mask 0x00000001, on 1 [ 2.199459] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1 [ 2.199495] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 hw state readout: crtc_mask 0x00000000, on 1 [ 2.199530] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1 [ 2.199569] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:66:DDI A] hw state readout: enabled, pipe A [ 2.199605] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:72:DDI B] hw state readout: disabled, pipe A [ 2.199641] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:67:eDP-1] hw state readout: enabled [ 2.199677] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:73:HDMI-A-1] hw state readout: disabled [ 2.199688] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [MODE:1366x768] for [CRTC:41:pipe A] state 00000000f54374a5 [ 2.199728] [drm:intel_dump_pipe_config [i915]] [CRTC:41:pipe A][setup_hw_state] [ 2.199763] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100) [ 2.199798] [drm:intel_dump_pipe_config [i915]] output format: RGB [ 2.199833] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 0 [ 2.199869] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 5347087, gmch_n: 8388608, link_m: 148530, link_n: 524288, tu: 64 [ 2.199904] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 2.199939] [drm:intel_dump_pipe_config [i915]] infoframes enabled: 0x0 [ 2.199974] [drm:intel_dump_pipe_config [i915]] requested mode: [ 2.199985] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 76490 1366 1374 1384 1558 768 771 772 816 0x40 0x9 [ 2.200020] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 2.200031] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 76490 1366 1374 1384 1558 768 771 772 816 0x40 0x9 [ 2.200066] [drm:intel_dump_pipe_config [i915]] crtc timings: 76490 1366 1374 1384 1558 768 771 772 816, type: 0x40 flags: 0x9 [ 2.200102] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1366x768, pixel rate 76490 [ 2.200135] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.200170] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 2.200217] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000 [ 2.200252] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 2.200287] [drm:intel_dump_pipe_config [i915]] [PLANE:30:primary A] disabled, scaler_id = -1 [ 2.200322] [drm:intel_dump_pipe_config [i915]] [PLANE:33:sprite A] disabled, scaler_id = -1 [ 2.200357] [drm:intel_dump_pipe_config [i915]] [PLANE:38:cursor A] disabled, scaler_id = -1 [ 2.200392] [drm:intel_dump_pipe_config [i915]] [CRTC:53:pipe B][setup_hw_state] [ 2.200427] [drm:intel_dump_pipe_config [i915]] output_types: (0x0) [ 2.200462] [drm:intel_dump_pipe_config [i915]] output format: Invalid [ 2.200497] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0 [ 2.200530] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 2.200562] [drm:intel_dump_pipe_config [i915]] infoframes enabled: 0x0 [ 2.200597] [drm:intel_dump_pipe_config [i915]] requested mode: [ 2.200608] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.200643] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 2.200654] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.200690] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 2.200725] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 2.200760] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.200795] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 2.200829] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 2.200864] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 2.200899] [drm:intel_dump_pipe_config [i915]] [PLANE:42:primary B] disabled, scaler_id = -1 [ 2.200934] [drm:intel_dump_pipe_config [i915]] [PLANE:45:sprite B] disabled, scaler_id = -1 [ 2.200969] [drm:intel_dump_pipe_config [i915]] [PLANE:50:cursor B] disabled, scaler_id = -1 [ 2.201004] [drm:intel_dump_pipe_config [i915]] [CRTC:65:pipe C][setup_hw_state] [ 2.201039] [drm:intel_dump_pipe_config [i915]] output_types: (0x0) [ 2.201074] [drm:intel_dump_pipe_config [i915]] output format: Invalid [ 2.201109] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0 [ 2.201143] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 2.201178] [drm:intel_dump_pipe_config [i915]] infoframes enabled: 0x0 [ 2.201213] [drm:intel_dump_pipe_config [i915]] requested mode: [ 2.201224] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.201259] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 2.201270] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.201305] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 2.201341] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 2.201376] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.201411] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 2.201446] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 2.201480] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 2.201515] [drm:intel_dump_pipe_config [i915]] [PLANE:54:primary C] disabled, scaler_id = -1 [ 2.201550] [drm:intel_dump_pipe_config [i915]] [PLANE:57:sprite C] disabled, scaler_id = -1 [ 2.201585] [drm:intel_dump_pipe_config [i915]] [PLANE:62:cursor C] disabled, scaler_id = -1 [ 2.201621] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 enabled but not in use, disabling [ 2.201656] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 enabled but not in use, disabling [ 2.201691] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 enabled but not in use, disabling [ 2.201733] [drm:i9xx_get_initial_plane_config [i915]] pipe A/primary A with fb: size=1366x768@32, offset=0, pitch 5504, size 0x408000 [ 2.201765] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, gtt_offset=0x0000000000000000, size=0x0000000000408000 [ 2.201807] [drm:intel_alloc_initial_plane_obj.isra.113 [i915]] initial plane fb obj 000000003c4e0b91 [ 2.201837] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000eecb0e6e [ 2.201849] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:41:pipe A] 000000006c9d9956 state to 00000000eecb0e6e [ 2.201861] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:53:pipe B] 00000000b4d832ec state to 00000000eecb0e6e [ 2.201873] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:65:pipe C] 0000000040ca5869 state to 00000000eecb0e6e [ 2.201886] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:30:primary A] 0000000060f02cb5 state to 00000000eecb0e6e [ 2.201897] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:33:sprite A] 00000000b142e9b9 state to 00000000eecb0e6e [ 2.201909] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:38:cursor A] 00000000b8543706 state to 00000000eecb0e6e [ 2.201921] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:42:primary B] 0000000085e4488c state to 00000000eecb0e6e [ 2.201932] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:45:sprite B] 00000000a75593b3 state to 00000000eecb0e6e [ 2.201944] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:50:cursor B] 00000000178fb881 state to 00000000eecb0e6e [ 2.201956] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:54:primary C] 00000000fb933ae7 state to 00000000eecb0e6e [ 2.201967] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:57:sprite C] 00000000a5b3f00b state to 00000000eecb0e6e [ 2.201979] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:62:cursor C] 00000000029467aa state to 00000000eecb0e6e [ 2.201991] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:67:eDP-1] 000000005d913155 state to 00000000eecb0e6e [ 2.202003] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:73:HDMI-A-1] 00000000e8d85c38 state to 00000000eecb0e6e [ 2.202010] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:67:eDP-1] [ 2.202016] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:67:eDP-1] keeps [ENCODER:66:DDI A], now on [CRTC:41:pipe A] [ 2.202022] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:73:HDMI-A-1] [ 2.202027] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Disabling [CONNECTOR:73:HDMI-A-1] [ 2.202066] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:41:pipe A] has [PLANE:30:primary A] with fb 80 [ 2.202102] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:30:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 2.202119] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000eecb0e6e [ 2.202132] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000eecb0e6e [ 2.202144] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000eecb0e6e [ 2.202156] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:41:pipe A] 0000000040ca5869 state to 00000000eecb0e6e [ 2.202167] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:41:pipe A] to 00000000eecb0e6e [ 2.202179] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:30:primary A] 00000000a5b3f00b state to 00000000eecb0e6e [ 2.202191] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:53:pipe B] 00000000b4d832ec state to 00000000eecb0e6e [ 2.202203] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:65:pipe C] 000000006c9d9956 state to 00000000eecb0e6e [ 2.202214] [drm:drm_atomic_check_only [drm]] checking 00000000eecb0e6e [ 2.202251] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:41:pipe A] has [PLANE:30:primary A] with fb 80 [ 2.202287] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:30:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 2.202300] [drm:drm_atomic_commit [drm]] committing 00000000eecb0e6e [ 2.219746] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000eecb0e6e [ 2.219770] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000eecb0e6e [ 2.219881] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [409000, 80000000] [ 2.221427] [drm:i915_gem_contexts_init [i915]] logical context support initialized [ 2.221572] [drm:intel_init_gt_powersave [i915]] Overclocking supported, max: 1100MHz, overclock: 1100MHz [ 2.221806] [drm:sandybridge_pcode_read [i915]] warning: pcode (read from mbox 5) mailbox access failed for intel_enable_gt_powersave [i915]: -6 [ 2.222122] [drm:intel_fbdev_init [i915]] found possible fb from plane A [ 2.222182] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping [ 2.222243] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping [ 2.222306] [drm:intel_fbdev_init [i915]] checking plane A for BIOS fb [ 2.222367] [drm:intel_fbdev_init [i915]] pipe A area: 1366x768, bpp: 32, size: 4227072 [ 2.222429] [drm:intel_fbdev_init [i915]] fb big enough for plane A (4227072 >= 4227072) [ 2.222491] [drm:intel_fbdev_init [i915]] pipe B not active, skipping [ 2.222553] [drm:intel_fbdev_init [i915]] pipe C not active, skipping [ 2.222616] [drm:intel_fbdev_init [i915]] using BIOS fb for initial console [ 2.223472] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered [ 2.223561] [drm:intel_dp_connector_register [i915]] registering DPDDC-A bus for card0-eDP-1 [ 2.223737] [drm] Initialized i915 1.6.0 20190220 for 0000:00:02.0 on minor 0 [ 2.223950] [drm:intel_opregion_resume [i915]] 2 outputs detected [ 2.230884] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.231244] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 [ 2.231357] [drm:intel_power_well_disable [i915]] disabling display [ 2.231374] [drm:drm_setup_crtcs [drm_kms_helper]] [ 2.231387] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:eDP-1] [ 2.231390] i915 device info: pciid=0x0a16 rev=0x0b platform=HASWELL gen=7 [ 2.231393] i915 device info: is_mobile: no [ 2.231472] [drm:intel_dp_detect [i915]] [CONNECTOR:67:eDP-1] [ 2.231474] i915 device info: is_lp: no [ 2.231476] i915 device info: is_alpha_support: no [ 2.231553] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 2.231556] i915 device info: has_64bit_reloc: no [ 2.231631] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 2.231634] i915 device info: gpu_reset_clobbers_display: no [ 2.231704] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 2.231707] i915 device info: has_reset_engine: no [ 2.231709] i915 device info: has_fpga_dbg: yes [ 2.231711] i915 device info: has_guc: no [ 2.231713] i915 device info: has_guc_ct: no [ 2.231714] i915 device info: has_l3_dpf: yes [ 2.231716] i915 device info: has_llc: yes [ 2.231718] i915 device info: has_logical_ring_contexts: no [ 2.231720] i915 device info: has_logical_ring_elsq: no [ 2.231722] i915 device info: has_logical_ring_preemption: no [ 2.231723] i915 device info: has_pooled_eu: no [ 2.231725] i915 device info: has_rc6: yes [ 2.231727] i915 device info: has_rc6p: no [ 2.231729] i915 device info: has_runtime_pm: yes [ 2.231730] i915 device info: has_snoop: no [ 2.231732] i915 device info: has_coherent_ggtt: yes [ 2.231734] i915 device info: unfenced_needs_alignment: no [ 2.231736] i915 device info: hws_needs_physical: no [ 2.231738] i915 device info: cursor_needs_physical: no [ 2.231740] i915 device info: has_csr: no [ 2.231741] i915 device info: has_ddi: yes [ 2.231743] i915 device info: has_dp_mst: yes [ 2.231745] i915 device info: has_fbc: yes [ 2.231747] i915 device info: has_gmch: no [ 2.231748] i915 device info: has_hotplug: yes [ 2.231750] i915 device info: has_ipc: no [ 2.231752] i915 device info: has_overlay: no [ 2.231754] i915 device info: has_psr: yes [ 2.231756] i915 device info: overlay_needs_physical: no [ 2.231758] i915 device info: supports_tv: no [ 2.231760] i915 device info: slice total: 1, mask=0001 [ 2.231762] i915 device info: subslice total: 2 [ 2.231765] i915 device info: slice0: 2 subslices, mask=0003 [ 2.231767] i915 device info: EU total: 20 [ 2.231769] i915 device info: EU per subslice: 10 [ 2.231770] i915 device info: has slice power gating: no [ 2.231772] i915 device info: has subslice power gating: no [ 2.231774] i915 device info: has EU power gating: no [ 2.231776] i915 device info: CS timestamp frequency: 12500 kHz [ 2.232291] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 2.232348] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes [ 2.233054] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:eDP-1] status updated from unknown to connected [ 2.233079] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 2.233099] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 2.233117] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 2.233153] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:eDP-1] probed modes : [ 2.233171] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 2.233188] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 48 61040 1366 1374 1384 1558 768 771 772 816 0x40 0x9 [ 2.233196] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] [ 2.233252] [drm:intel_hdmi_detect [i915]] [CONNECTOR:73:HDMI-A-1] [ 2.233480] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.233540] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.233766] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.233785] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 2.233841] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 2.233899] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 2.234600] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 2.234657] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 2.234878] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.234934] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.235154] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.235165] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 2.235174] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] status updated from unknown to disconnected [ 2.235184] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] disconnected [ 2.235196] [drm:drm_setup_crtcs [drm_kms_helper]] connector 67 enabled? yes [ 2.235204] [drm:drm_setup_crtcs [drm_kms_helper]] connector 73 enabled? no [ 2.235264] [drm:intel_fb_initial_config [i915]] looking for cmdline mode on connector eDP-1 [ 2.235323] [drm:intel_fb_initial_config [i915]] looking for preferred mode on connector eDP-1 0 [ 2.235383] [drm:intel_fb_initial_config [i915]] connector eDP-1 on [CRTC:41:pipe A]: 1366x768 [ 2.235441] [drm:intel_fb_initial_config [i915]] connector HDMI-A-1 not enabled, skipping [ 2.235451] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1366x768 set on crtc 41 (0,0) [ 2.235510] [drm:intelfb_create [i915]] re-using BIOS fb [ 2.235574] [drm:intelfb_create [i915]] allocated 1366x768 fb: 0x00000000 [ 2.235654] fbcon: inteldrmfb (fb0) is primary device [ 2.235762] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000f879da1c [ 2.235792] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:30:primary A] 000000004ab5ca9d state to 00000000f879da1c [ 2.235820] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:41:pipe A] 00000000a2c42e3f state to 00000000f879da1c [ 2.235839] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:33:sprite A] 00000000ed725fdd state to 00000000f879da1c [ 2.235853] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:33:sprite A] state 00000000ed725fdd [ 2.235871] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:38:cursor A] 000000008c826975 state to 00000000f879da1c [ 2.235884] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:38:cursor A] state 000000008c826975 [ 2.235902] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:42:primary B] 000000006436936b state to 00000000f879da1c [ 2.235920] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:45:sprite B] 000000008580d8ce state to 00000000f879da1c [ 2.235932] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:45:sprite B] state 000000008580d8ce [ 2.235956] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:50:cursor B] 00000000ac5c2ca8 state to 00000000f879da1c [ 2.235976] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:50:cursor B] state 00000000ac5c2ca8 [ 2.236002] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:54:primary C] 000000007b8f47bf state to 00000000f879da1c [ 2.236023] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:57:sprite C] 00000000bcecb330 state to 00000000f879da1c [ 2.236036] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:57:sprite C] state 00000000bcecb330 [ 2.236053] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:62:cursor C] 0000000044d4cfd0 state to 00000000f879da1c [ 2.236065] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:62:cursor C] state 0000000044d4cfd0 [ 2.236080] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [MODE:1366x768] for [CRTC:41:pipe A] state 00000000a2c42e3f [ 2.236092] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:80] for [PLANE:30:primary A] state 000000004ab5ca9d [ 2.236110] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:41:pipe A] to 00000000f879da1c [ 2.236129] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:67:eDP-1] 000000009ac31f03 state to 00000000f879da1c [ 2.236141] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:67:eDP-1] state 000000009ac31f03 to [NOCRTC] [ 2.236154] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:67:eDP-1] state 000000009ac31f03 to [CRTC:41:pipe A] [ 2.236172] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:53:pipe B] 000000009e0fbff6 state to 00000000f879da1c [ 2.236184] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:53:pipe B] state 000000009e0fbff6 [ 2.236196] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:42:primary B] state 000000006436936b [ 2.236213] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:53:pipe B] to 00000000f879da1c [ 2.236232] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:65:pipe C] 000000001ba4cf76 state to 00000000f879da1c [ 2.236244] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:65:pipe C] state 000000001ba4cf76 [ 2.236256] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:54:primary C] state 000000007b8f47bf [ 2.236273] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:65:pipe C] to 00000000f879da1c [ 2.236291] [drm:drm_atomic_check_only [drm]] checking 00000000f879da1c [ 2.236302] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:41:pipe A] mode changed [ 2.236312] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:67:eDP-1] [ 2.236321] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:67:eDP-1] keeps [ENCODER:66:DDI A], now on [CRTC:41:pipe A] [ 2.236330] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:41:pipe A] needs all connectors, enable: y, active: y [ 2.236347] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:41:pipe A] to 00000000f879da1c [ 2.236365] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:41:pipe A] to 00000000f879da1c [ 2.236430] [drm:intel_atomic_check [i915]] [CONNECTOR:67:eDP-1] Limiting display bpp to 18 instead of EDID bpp 18, requested bpp 36, max platform bpp 36 [ 2.236492] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 18 pixel clock 76300KHz [ 2.236551] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 2.236609] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 2.236668] [drm:intel_dp_compute_config [i915]] DP link rate required 171675 available 270000 [ 2.236730] [drm:intel_atomic_check [i915]] hw max bpp: 18, pipe bpp: 18, dithering: 1 [ 2.236794] [drm:intel_dump_pipe_config [i915]] [CRTC:41:pipe A][fastset] [ 2.236858] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100) [ 2.236929] [drm:intel_dump_pipe_config [i915]] output format: RGB [ 2.236990] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 2.237050] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 5347087, gmch_n: 8388608, link_m: 148530, link_n: 524288, tu: 64 [ 2.237110] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 2.237170] [drm:intel_dump_pipe_config [i915]] infoframes enabled: 0x0 [ 2.237230] [drm:intel_dump_pipe_config [i915]] requested mode: [ 2.237249] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 2.237309] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 2.237328] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 2.237389] [drm:intel_dump_pipe_config [i915]] crtc timings: 76300 1366 1374 1384 1558 768 771 772 816, type: 0x48 flags: 0x9 [ 2.237450] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1366x768, pixel rate 76300 [ 2.237510] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.237571] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 2.237631] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000 [ 2.237691] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 2.237753] [drm:intel_dump_pipe_config [i915]] [PLANE:30:primary A] FB:80, fb = 1366x768 format = XR24 little-endian (0x34325258) [ 2.237813] [drm:intel_dump_pipe_config [i915]] [PLANE:33:sprite A] disabled, scaler_id = -1 [ 2.237874] [drm:intel_dump_pipe_config [i915]] [PLANE:38:cursor A] disabled, scaler_id = -1 [ 2.237938] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:41:pipe A] has [PLANE:30:primary A] with fb 80 [ 2.237999] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:30:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 2.238023] [drm:drm_atomic_commit [drm]] committing 00000000f879da1c [ 2.238101] [drm:intel_ddi_update_pipe [i915]] Panel doesn't support DRRS [ 2.243048] [drm:verify_connector_state.isra.70 [i915]] [CONNECTOR:67:eDP-1] [ 2.243113] [drm:intel_atomic_commit_tail [i915]] [CRTC:41:pipe A] [ 2.243186] [drm:verify_single_dpll_state.isra.71 [i915]] SPLL [ 2.243195] Console: switching to colour frame buffer device 170x48 [ 2.243245] [drm:drm_atomic_state_init [drm]] Allocated atomic state 0000000077a4e6fb [ 2.243278] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000f879da1c [ 2.243299] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000f879da1c [ 2.243320] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:30:primary A] 00000000b148061d state to 0000000077a4e6fb [ 2.243338] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:41:pipe A] 00000000f54374a5 state to 0000000077a4e6fb [ 2.243356] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:33:sprite A] 00000000d2347739 state to 0000000077a4e6fb [ 2.243369] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:33:sprite A] state 00000000d2347739 [ 2.243387] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:38:cursor A] 00000000d391ac6c state to 0000000077a4e6fb [ 2.243399] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:38:cursor A] state 00000000d391ac6c [ 2.243417] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:42:primary B] 00000000f200a93d state to 0000000077a4e6fb [ 2.243434] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:45:sprite B] 0000000028112843 state to 0000000077a4e6fb [ 2.243447] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:45:sprite B] state 0000000028112843 [ 2.243464] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:50:cursor B] 00000000b4ad7f84 state to 0000000077a4e6fb [ 2.243476] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:50:cursor B] state 00000000b4ad7f84 [ 2.243493] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:54:primary C] 00000000ca3dcdd8 state to 0000000077a4e6fb [ 2.243515] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:57:sprite C] 00000000e8977b03 state to 0000000077a4e6fb [ 2.243541] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:57:sprite C] state 00000000e8977b03 [ 2.243558] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:62:cursor C] 000000009b86282d state to 0000000077a4e6fb [ 2.243570] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:62:cursor C] state 000000009b86282d [ 2.243583] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:80] for [PLANE:30:primary A] state 00000000b148061d [ 2.243601] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:41:pipe A] to 0000000077a4e6fb [ 2.243619] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:67:eDP-1] 00000000541f4486 state to 0000000077a4e6fb [ 2.243632] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:67:eDP-1] state 00000000541f4486 to [NOCRTC] [ 2.243644] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:67:eDP-1] state 00000000541f4486 to [CRTC:41:pipe A] [ 2.243665] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:53:pipe B] 00000000931e800a state to 0000000077a4e6fb [ 2.243677] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:53:pipe B] state 00000000931e800a [ 2.243689] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:42:primary B] state 00000000f200a93d [ 2.243706] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:53:pipe B] to 0000000077a4e6fb [ 2.243724] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:65:pipe C] 0000000038ccba29 state to 0000000077a4e6fb [ 2.243737] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:65:pipe C] state 0000000038ccba29 [ 2.243749] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:54:primary C] state 00000000ca3dcdd8 [ 2.243766] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:65:pipe C] to 0000000077a4e6fb [ 2.243784] [drm:drm_atomic_check_only [drm]] checking 0000000077a4e6fb [ 2.243795] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:67:eDP-1] [ 2.243805] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:67:eDP-1] keeps [ENCODER:66:DDI A], now on [CRTC:41:pipe A] [ 2.243869] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:41:pipe A] has [PLANE:30:primary A] with fb 80 [ 2.243929] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:30:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 2.243953] [drm:drm_atomic_commit [drm]] committing 0000000077a4e6fb [ 2.254412] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.254450] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 0000000077a4e6fb [ 2.254479] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 0000000077a4e6fb [ 2.286926] [drm:drm_fb_helper_hotplug_event.part.29 [drm_kms_helper]] [ 2.286942] [drm:drm_setup_crtcs [drm_kms_helper]] [ 2.286958] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:eDP-1] [ 2.287025] [drm:intel_dp_detect [i915]] [CONNECTOR:67:eDP-1] [ 2.287090] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 2.287155] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 2.287217] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 2.287813] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 2.287880] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes [ 2.288648] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 2.288682] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 2.288712] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 2.288775] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:eDP-1] probed modes : [ 2.288806] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 2.288837] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 48 61040 1366 1374 1384 1558 768 771 772 816 0x40 0x9 [ 2.288851] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] [ 2.288918] [drm:intel_hdmi_detect [i915]] [CONNECTOR:73:HDMI-A-1] [ 2.289158] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.289218] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.289456] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.289489] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 2.289558] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 2.289625] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 2.290401] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 2.290471] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 2.290709] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.290770] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.291001] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.291020] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 2.291035] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] disconnected [ 2.291050] [drm:drm_setup_crtcs [drm_kms_helper]] connector 67 enabled? yes [ 2.291062] [drm:drm_setup_crtcs [drm_kms_helper]] connector 73 enabled? no [ 2.291131] [drm:intel_fb_initial_config [i915]] looking for cmdline mode on connector eDP-1 [ 2.291203] [drm:intel_fb_initial_config [i915]] looking for preferred mode on connector eDP-1 0 [ 2.291276] [drm:intel_fb_initial_config [i915]] connector eDP-1 on [CRTC:41:pipe A]: 1366x768 [ 2.291346] [drm:intel_fb_initial_config [i915]] connector HDMI-A-1 not enabled, skipping [ 2.291364] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1366x768 set on crtc 41 (0,0) [ 2.291403] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000f879da1c [ 2.291440] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:30:primary A] 000000006d3798b3 state to 00000000f879da1c [ 2.291477] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:41:pipe A] 00000000c0f6d181 state to 00000000f879da1c [ 2.291513] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:33:sprite A] 00000000afc349fe state to 00000000f879da1c [ 2.291541] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:33:sprite A] state 00000000afc349fe [ 2.291577] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:38:cursor A] 000000001b6cc923 state to 00000000f879da1c [ 2.291604] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:38:cursor A] state 000000001b6cc923 [ 2.291639] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:42:primary B] 00000000193f1e2d state to 00000000f879da1c [ 2.291675] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:45:sprite B] 0000000066683877 state to 00000000f879da1c [ 2.291702] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:45:sprite B] state 0000000066683877 [ 2.291739] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:50:cursor B] 00000000029467aa state to 00000000f879da1c [ 2.291766] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:50:cursor B] state 00000000029467aa [ 2.291803] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:54:primary C] 000000007f5c0f7b state to 00000000f879da1c [ 2.291838] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:57:sprite C] 0000000044d4cfd0 state to 00000000f879da1c [ 2.291865] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:57:sprite C] state 0000000044d4cfd0 [ 2.291902] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:62:cursor C] 00000000bcecb330 state to 00000000f879da1c [ 2.291929] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:62:cursor C] state 00000000bcecb330 [ 2.291957] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:80] for [PLANE:30:primary A] state 000000006d3798b3 [ 2.291993] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:41:pipe A] to 00000000f879da1c [ 2.292029] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:67:eDP-1] 000000002e4f7d9d state to 00000000f879da1c [ 2.292055] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:67:eDP-1] state 000000002e4f7d9d to [NOCRTC] [ 2.292080] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:67:eDP-1] state 000000002e4f7d9d to [CRTC:41:pipe A] [ 2.292114] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:53:pipe B] 000000004be0573c state to 00000000f879da1c [ 2.292137] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:53:pipe B] state 000000004be0573c [ 2.292160] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:42:primary B] state 00000000193f1e2d [ 2.292191] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:53:pipe B] to 00000000f879da1c [ 2.292225] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:65:pipe C] 00000000a24940a3 state to 00000000f879da1c [ 2.292250] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:65:pipe C] state 00000000a24940a3 [ 2.292272] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:54:primary C] state 000000007f5c0f7b [ 2.292303] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:65:pipe C] to 00000000f879da1c [ 2.292335] [drm:drm_atomic_check_only [drm]] checking 00000000f879da1c [ 2.292356] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:67:eDP-1] [ 2.292373] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:67:eDP-1] keeps [ENCODER:66:DDI A], now on [CRTC:41:pipe A] [ 2.292455] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:41:pipe A] has [PLANE:30:primary A] with fb 80 [ 2.292531] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:30:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 2.292574] [drm:drm_atomic_commit [drm]] committing 00000000f879da1c [ 2.297372] [drm:drm_fb_helper_hotplug_event.part.29 [drm_kms_helper]] [ 2.297391] [drm:drm_setup_crtcs [drm_kms_helper]] [ 2.297412] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:eDP-1] [ 2.297513] [drm:intel_dp_detect [i915]] [CONNECTOR:67:eDP-1] [ 2.297613] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 2.297700] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 2.297765] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 2.297842] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000f879da1c [ 2.297895] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000f879da1c [ 2.298368] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 2.298435] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes [ 2.299195] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 2.299230] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 2.299261] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 2.299323] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:eDP-1] probed modes : [ 2.299355] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 2.299386] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 48 61040 1366 1374 1384 1558 768 771 772 816 0x40 0x9 [ 2.299400] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] [ 2.299466] [drm:intel_hdmi_detect [i915]] [CONNECTOR:73:HDMI-A-1] [ 2.299669] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.299699] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.299890] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.299906] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 2.299937] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 2.299966] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 2.300667] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 2.300692] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 2.300874] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.300896] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.301074] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.301081] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 2.301087] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] disconnected [ 2.301092] [drm:drm_setup_crtcs [drm_kms_helper]] connector 67 enabled? yes [ 2.301097] [drm:drm_setup_crtcs [drm_kms_helper]] connector 73 enabled? no [ 2.301122] [drm:intel_fb_initial_config [i915]] looking for cmdline mode on connector eDP-1 [ 2.301145] [drm:intel_fb_initial_config [i915]] looking for preferred mode on connector eDP-1 0 [ 2.301168] [drm:intel_fb_initial_config [i915]] connector eDP-1 on [CRTC:41:pipe A]: 1366x768 [ 2.301193] [drm:intel_fb_initial_config [i915]] connector HDMI-A-1 not enabled, skipping [ 2.301199] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1366x768 set on crtc 41 (0,0) [ 2.301213] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000f879da1c [ 2.301227] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:30:primary A] 00000000f200a93d state to 00000000f879da1c [ 2.301240] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:41:pipe A] 0000000038ccba29 state to 00000000f879da1c [ 2.301253] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:33:sprite A] 00000000d391ac6c state to 00000000f879da1c [ 2.301263] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:33:sprite A] state 00000000d391ac6c [ 2.301276] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:38:cursor A] 00000000d2347739 state to 00000000f879da1c [ 2.301286] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:38:cursor A] state 00000000d2347739 [ 2.301298] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:42:primary B] 00000000b148061d state to 00000000f879da1c [ 2.301312] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:45:sprite B] 000000007b8f47bf state to 00000000f879da1c [ 2.301321] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:45:sprite B] state 000000007b8f47bf [ 2.301334] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:50:cursor B] 00000000ac5c2ca8 state to 00000000f879da1c [ 2.301344] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:50:cursor B] state 00000000ac5c2ca8 [ 2.301357] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:54:primary C] 000000008580d8ce state to 00000000f879da1c [ 2.301370] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:57:sprite C] 000000006436936b state to 00000000f879da1c [ 2.301379] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:57:sprite C] state 000000006436936b [ 2.301392] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:62:cursor C] 000000008c826975 state to 00000000f879da1c [ 2.301402] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:62:cursor C] state 000000008c826975 [ 2.301412] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:80] for [PLANE:30:primary A] state 00000000f200a93d [ 2.301425] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:41:pipe A] to 00000000f879da1c [ 2.301439] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:67:eDP-1] 0000000091b2a203 state to 00000000f879da1c [ 2.301448] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:67:eDP-1] state 0000000091b2a203 to [NOCRTC] [ 2.301458] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:67:eDP-1] state 0000000091b2a203 to [CRTC:41:pipe A] [ 2.301472] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:53:pipe B] 00000000931e800a state to 00000000f879da1c [ 2.301481] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:53:pipe B] state 00000000931e800a [ 2.301491] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:42:primary B] state 00000000b148061d [ 2.301504] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:53:pipe B] to 00000000f879da1c [ 2.301517] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:65:pipe C] 00000000500ea83f state to 00000000f879da1c [ 2.301527] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:65:pipe C] state 00000000500ea83f [ 2.301536] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:54:primary C] state 000000008580d8ce [ 2.301549] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:65:pipe C] to 00000000f879da1c [ 2.301562] [drm:drm_atomic_check_only [drm]] checking 00000000f879da1c [ 2.301570] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:67:eDP-1] [ 2.301576] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:67:eDP-1] keeps [ENCODER:66:DDI A], now on [CRTC:41:pipe A] [ 2.301607] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:41:pipe A] has [PLANE:30:primary A] with fb 80 [ 2.301636] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:30:primary A] visible 1 -> 1, off 0, on 0, ms 0 [ 2.301651] [drm:drm_atomic_commit [drm]] committing 00000000f879da1c [ 2.305145] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000f879da1c [ 2.305164] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000f879da1c [ 2.350574] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.361500] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.371403] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.371477] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.371505] ehci-pci: EHCI PCI platform driver [ 2.371707] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.371714] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 2.371726] ehci-pci 0000:00:1d.0: debug port 2 [ 2.374571] SCSI subsystem initialized [ 2.375641] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.375655] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb0c1c000 [ 2.379450] cryptd: max_cpu_qlen set to 1000 [ 2.384434] libata version 3.00 loaded. [ 2.386890] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.386940] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 [ 2.386942] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.386944] usb usb1: Product: EHCI Host Controller [ 2.386946] usb usb1: Manufacturer: Linux 5.0.0-g6e610bdc61f8 ehci_hcd [ 2.386948] usb usb1: SerialNumber: 0000:00:1d.0 [ 2.387224] hub 1-0:1.0: USB hub found [ 2.387231] hub 1-0:1.0: 2 ports detected [ 2.387608] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.387617] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 2.388379] ahci 0000:00:1f.2: version 3.0 [ 2.388814] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810 [ 2.388819] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.389113] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 [ 2.389116] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.389117] usb usb2: Product: xHCI Host Controller [ 2.389119] usb usb2: Manufacturer: Linux 5.0.0-g6e610bdc61f8 xhci-hcd [ 2.389121] usb usb2: SerialNumber: 0000:00:14.0 [ 2.389381] hub 2-0:1.0: USB hub found [ 2.389543] hub 2-0:1.0: 9 ports detected [ 2.393728] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.393733] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.393737] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 2.393782] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00 [ 2.393784] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.393785] usb usb3: Product: xHCI Host Controller [ 2.393787] usb usb3: Manufacturer: Linux 5.0.0-g6e610bdc61f8 xhci-hcd [ 2.393789] usb usb3: SerialNumber: 0000:00:14.0 [ 2.394031] hub 3-0:1.0: USB hub found [ 2.394041] hub 3-0:1.0: 4 ports detected [ 2.395180] AVX2 version of gcm_enc/dec engaged. [ 2.395180] AES CTR mode by8 optimization enabled [ 2.397703] [drm:ilk_hpd_irq_handler [i915]] hotplug event received, stat 0x08000000, dig 0x00000011, pins 0x00000010, long 0x00000000 [ 2.397740] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - short [ 2.397789] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port A - short [ 2.398514] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 81 41 00 00 01 00 02 00 00 00 00 00 00 [ 2.398881] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode [ 2.398884] ahci 0000:00:1f.2: flags: 64bit ncq led clo only pio slum part deso sadm sds apst [ 2.401247] scsi host0: ahci [ 2.402714] scsi host1: ahci [ 2.402839] scsi host2: ahci [ 2.402912] ata1: SATA max UDMA/133 abar m2048@0xb0c1b000 port 0xb0c1b100 irq 44 [ 2.402913] ata2: DUMMY [ 2.402914] ata3: DUMMY [ 2.420813] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 2.566962] tsc: Refined TSC clocksource calibration: 2593.994 MHz [ 2.566983] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256412811b4, max_idle_ns: 440795306987 ns [ 2.567040] clocksource: Switched to clocksource tsc [ 2.716949] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.717935] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.720124] ata1.00: supports DRM functions and may not be fully accessible [ 2.721288] ata1.00: ATA-11: Samsung SSD 860 EVO 1TB, RVT01B6Q, max UDMA/133 [ 2.721295] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.724662] ata1.00: supports DRM functions and may not be fully accessible [ 2.728172] ata1.00: configured for UDMA/133 [ 2.728184] ahci 0000:00:1f.2: port does not support device sleep [ 2.728812] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5 [ 2.739095] ata1.00: Enabling discard_zeroes_data [ 2.739213] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.739233] sd 0:0:0:0: [sda] Write Protect is off [ 2.739236] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.739271] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.739450] ata1.00: Enabling discard_zeroes_data [ 2.740776] sda: sda1 sda2 sda3 [ 2.741087] ata1.00: Enabling discard_zeroes_data [ 2.742313] sd 0:0:0:0: [sda] supports TCG Opal [ 2.742316] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.801928] device-mapper: uevent: version 1.0.3 [ 2.802062] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 2.815226] random: fast init done [ 2.826774] random: cryptsetup: uninitialized urandom read (4 bytes read) [ 2.835488] random: cryptsetup: uninitialized urandom read (4 bytes read) [ 2.864328] usb 1-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ 2.864332] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.864772] hub 1-1:1.0: USB hub found [ 2.864817] hub 1-1:1.0: 8 ports detected [ 3.146959] usb 1-1.3: new full-speed USB device number 3 using ehci-pci [ 3.249487] usb 1-1.3: New USB device found, idVendor=248a, idProduct=8367, bcdDevice= 1.00 [ 3.249493] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.249497] usb 1-1.3: Product: Wireless Receiver [ 3.249501] usb 1-1.3: Manufacturer: Telink [ 3.262924] hidraw: raw HID events driver (C) Jiri Kosina [ 3.270706] usbcore: registered new interface driver usbhid [ 3.270708] usbhid: USB HID core driver [ 3.273272] input: Telink Wireless Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:248A:8367.0001/input/input7 [ 3.273308] input: Telink Wireless Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:248A:8367.0001/input/input8 [ 3.323597] usb 1-1.5: new full-speed USB device number 4 using ehci-pci [ 3.327015] input: Telink Wireless Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:248A:8367.0001/input/input9 [ 3.327144] hid-generic 0003:248A:8367.0001: input,hidraw0: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-0000:00:1d.0-1.3/input0 [ 3.327366] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:248A:8367.0002/input/input10 [ 3.383847] hid-generic 0003:248A:8367.0002: input,hidraw1: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-0000:00:1d.0-1.3/input1 [ 3.422965] usb 1-1.5: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01 [ 3.422971] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.500289] usb 1-1.7: new high-speed USB device number 5 using ehci-pci [ 3.598620] usb 1-1.7: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60 [ 3.598627] usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.598631] usb 1-1.7: Product: USB2.0-CRW [ 3.598635] usb 1-1.7: Manufacturer: Generic [ 3.598639] usb 1-1.7: SerialNumber: 20100201396000000 [ 3.607510] usbcore: registered new interface driver rtsx_usb [ 5.447048] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off [ 5.447143] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007 [ 12.478090] NET: Registered protocol family 38 [ 12.486200] random: crng init done [ 12.546762] device-mapper: crypt: xts(aes) using implementation "xts-aes-aesni" [ 12.627368] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 12.808983] systemd[1]: systemd 241.7-2-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 12.823769] systemd[1]: Detected architecture x86-64. [ 12.828748] systemd[1]: Set hostname to . [ 12.921270] systemd-system-update-generator[348]: Offline system update overridden by runlevel "emergency" on the kernel command line [ 13.059475] systemd[1]: /usr/lib/systemd/system/smb.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/smbd.pid → /run/smbd.pid; please update the unit file accordingly. [ 13.059796] systemd[1]: /usr/lib/systemd/system/winbind.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/winbindd.pid → /run/winbindd.pid; please update the unit file accordingly. [ 13.060149] systemd[1]: /usr/lib/systemd/system/nmb.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/nmbd.pid → /run/nmbd.pid; please update the unit file accordingly. [ 13.075355] systemd[1]: Started Emergency Shell. [ 13.075467] systemd[1]: Reached target Emergency Mode. [ 13.077260] systemd[350]: emergency.service: Executable /bin/plymouth missing, skipping: No such file or directory [ 13.083743] systemd[1]: Startup finished in 1.182s (firmware) + 6.812s (loader) + 12.770s (kernel) + 313ms (userspace) = 21.077s.