[ 0.000000] microcode: microcode updated early to revision 0x24, date = 2018-04-02 [ 0.000000] Linux version 5.0.0-g6e610bdc61f8 (grawity@frost) (gcc version 8.2.1 20181127 (GCC)) #2 SMP PREEMPT Wed Mar 13 08:26:12 EET 2019 [ 0.000000] Command line: initrd=\intel-ucode.img initrd=\EFI\custom\bisect.rd cryptdevice=PARTUUID=cf9d14dd-de5b-4e4e-9874-8badc535c98e:sys:allow-discards root=/dev/mapper/sys rw net.ifnames=0 quiet i915.fastboot=1 drm.debug=14 log_buf_len=4M emergency [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000094d5ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000094d60000-0x0000000095d5ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000095d60000-0x000000009a36efff] usable [ 0.000000] BIOS-e820: [mem 0x000000009a36f000-0x000000009aebefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x93ed0018-0x93ee0057] usable ==> usable [ 0.000000] e820: update [mem 0x93ed0018-0x93ee0057] usable ==> usable [ 0.000000] e820: update [mem 0x93ec3018-0x93ecf057] usable ==> usable [ 0.000000] e820: update [mem 0x93ec3018-0x93ecf057] usable ==> usable [ 0.000000] e820: update [mem 0x93ebb018-0x93ec2c57] usable ==> usable [ 0.000000] e820: update [mem 0x93ebb018-0x93ec2c57] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000087fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000093ebb017] usable [ 0.000000] reserve setup_data: [mem 0x0000000093ebb018-0x0000000093ec2c57] usable [ 0.000000] reserve setup_data: [mem 0x0000000093ec2c58-0x0000000093ec3017] usable [ 0.000000] reserve setup_data: [mem 0x0000000093ec3018-0x0000000093ecf057] usable [ 0.000000] reserve setup_data: [mem 0x0000000093ecf058-0x0000000093ed0017] usable [ 0.000000] reserve setup_data: [mem 0x0000000093ed0018-0x0000000093ee0057] usable [ 0.000000] reserve setup_data: [mem 0x0000000093ee0058-0x0000000094d5ffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000094d60000-0x0000000095d5ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000095d60000-0x000000009a36efff] usable [ 0.000000] reserve setup_data: [mem 0x000000009a36f000-0x000000009aebefff] reserved [ 0.000000] reserve setup_data: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000009afbf000-0x000000009affefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000009afff000-0x000000009affffff] usable [ 0.000000] reserve setup_data: [mem 0x000000009b000000-0x000000009f9fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe101000-0x00000000fe112fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000025f5fffff] usable [ 0.000000] efi: EFI v2.31 by INSYDE Corp. [ 0.000000] efi: ACPI=0x9affe000 ACPI 2.0=0x9affe014 SMBIOS=0x9aebef98 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. Inspiron 5547/06X5CY, BIOS A10 08/25/2016 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2593.905 MHz processor [ 0.000127] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000129] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000139] last_pfn = 0x25f600 max_arch_pfn = 0x400000000 [ 0.000144] MTRR default type: uncachable [ 0.000145] MTRR fixed ranges enabled: [ 0.000146] 00000-9FFFF write-back [ 0.000147] A0000-BFFFF uncachable [ 0.000148] C0000-E7FFF write-protect [ 0.000149] E8000-EFFFF write-combining [ 0.000150] F0000-FFFFF write-protect [ 0.000151] MTRR variable ranges enabled: [ 0.000153] 0 base 0000000000 mask 7F80000000 write-back [ 0.000154] 1 base 0080000000 mask 7FE0000000 write-back [ 0.000155] 2 base 009B000000 mask 7FFF000000 uncachable [ 0.000156] 3 base 009C000000 mask 7FFC000000 uncachable [ 0.000157] 4 base 00FFC00000 mask 7FFFC00000 write-protect [ 0.000158] 5 base 0100000000 mask 7F00000000 write-back [ 0.000159] 6 base 0200000000 mask 7F80000000 write-back [ 0.000160] 7 base 025F600000 mask 7FFFE00000 uncachable [ 0.000161] 8 base 025F800000 mask 7FFF800000 uncachable [ 0.000162] 9 base 0260000000 mask 7FE0000000 uncachable [ 0.001335] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001546] last_pfn = 0x9b000 max_arch_pfn = 0x400000000 [ 0.016074] check: Scanning 1 areas for low memory corruption [ 0.016077] Base memory trampoline at [(____ptrval____)] 82000 size 24576 [ 0.016081] Using GB pages for direct mapping [ 0.016084] BRK [0x45c01000, 0x45c01fff] PGTABLE [ 0.016086] BRK [0x45c02000, 0x45c02fff] PGTABLE [ 0.016087] BRK [0x45c03000, 0x45c03fff] PGTABLE [ 0.016143] BRK [0x45c04000, 0x45c04fff] PGTABLE [ 0.016145] BRK [0x45c05000, 0x45c05fff] PGTABLE [ 0.016600] BRK [0x45c06000, 0x45c06fff] PGTABLE [ 0.016733] BRK [0x45c07000, 0x45c07fff] PGTABLE [ 0.016817] BRK [0x45c08000, 0x45c08fff] PGTABLE [ 0.017183] printk: log_buf_len: 4194304 bytes [ 0.017185] printk: early log buf free: 123348(94%) [ 0.017186] Secure boot disabled [ 0.017187] RAMDISK: [mem 0x7ef98000-0x7fffefff] [ 0.017194] ACPI: Early table checksum verification disabled [ 0.017197] ACPI: RSDP 0x000000009AFFE014 000024 (v02 DELL ) [ 0.017201] ACPI: XSDT 0x000000009AFFE210 0000B4 (v01 DELL CL09 00000001 01000013) [ 0.017207] ACPI: FACP 0x000000009AFF9000 00010C (v05 DELL CL09 00000001 ASL 00040000) [ 0.017214] ACPI: DSDT 0x000000009AFE7000 00E06E (v01 DELL CL09 00000000 ASL 00040000) [ 0.017218] ACPI: FACS 0x000000009AFB8000 000040 [ 0.017221] ACPI: UEFI 0x000000009AFFD000 000236 (v01 DELL CL09 00000001 ASL 00040000) [ 0.017224] ACPI: FPDT 0x000000009AFFB000 000044 (v01 DELL CL09 00000001 ASL 00040000) [ 0.017227] ACPI: ASF! 0x000000009AFFA000 0000A5 (v32 DELL CL09 00000001 ASL 00040000) [ 0.017230] ACPI: HPET 0x000000009AFF8000 000038 (v01 DELL CL09 00000001 ASL 00040000) [ 0.017233] ACPI: APIC 0x000000009AFF7000 00008C (v03 DELL CL09 00000001 ASL 00040000) [ 0.017237] ACPI: MCFG 0x000000009AFF6000 00003C (v01 DELL CL09 00000001 ASL 00040000) [ 0.017240] ACPI: SSDT 0x000000009AFE6000 0006FE (v01 COMPAL CRV ORB 00001000 ACPI 00040000) [ 0.017243] ACPI: BOOT 0x000000009AFE4000 000028 (v01 DELL CL09 00000001 ASL 00040000) [ 0.017246] ACPI: LPIT 0x000000009AFE3000 000094 (v01 DELL CL09 00000000 ASL 00040000) [ 0.017249] ACPI: ASPT 0x000000009AFE1000 000034 (v07 DELL CL09 00000001 ASL 00040000) [ 0.017253] ACPI: DBGP 0x000000009AFE0000 000034 (v01 DELL CL09 00000001 ASL 00040000) [ 0.017256] ACPI: SSDT 0x000000009AFDA000 000539 (v01 COMPAL CRV ORB 00003000 ACPI 00040000) [ 0.017259] ACPI: SSDT 0x000000009AFD9000 000AD8 (v01 COMPAL CRV ORB 00003000 ACPI 00040000) [ 0.017262] ACPI: SSDT 0x000000009AFD5000 00355E (v01 COMPAL CRV ORB 00003000 ACPI 00040000) [ 0.017265] ACPI: SSDT 0x000000009AFD0000 002250 (v01 COMPAL CRV ORB 00001000 ACPI 00040000) [ 0.017268] ACPI: CSRT 0x000000009AFD3000 0000C4 (v01 DELL CL09 00000001 ASL 00040000) [ 0.017272] ACPI: BGRT 0x000000009AFD4000 000038 (v01 DELL CL09 00000001 ASL 00040000) [ 0.017282] ACPI: Local APIC address 0xfee00000 [ 0.017375] No NUMA configuration found [ 0.017376] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff] [ 0.017380] NODE_DATA(0) allocated [mem 0x25f1fa000-0x25f1fdfff] [ 0.017407] Zone ranges: [ 0.017408] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.017410] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.017411] Normal [mem 0x0000000100000000-0x000000025f5fffff] [ 0.017412] Device empty [ 0.017413] Movable zone start for each node [ 0.017414] Early memory node ranges [ 0.017415] node 0: [mem 0x0000000000001000-0x000000000006efff] [ 0.017416] node 0: [mem 0x0000000000070000-0x0000000000087fff] [ 0.017417] node 0: [mem 0x0000000000100000-0x0000000094d5ffff] [ 0.017418] node 0: [mem 0x0000000095d60000-0x000000009a36efff] [ 0.017419] node 0: [mem 0x000000009afff000-0x000000009affffff] [ 0.017419] node 0: [mem 0x0000000100000000-0x000000025f5fffff] [ 0.017911] Zeroed struct page in unavailable ranges: 27914 pages [ 0.017912] Initmem setup node 0 [mem 0x0000000000001000-0x000000025f5fffff] [ 0.017914] On node 0 totalpages: 2066678 [ 0.017915] DMA zone: 64 pages used for memmap [ 0.017916] DMA zone: 21 pages reserved [ 0.017917] DMA zone: 3974 pages, LIFO batch:0 [ 0.018040] DMA32 zone: 9742 pages used for memmap [ 0.018041] DMA32 zone: 623472 pages, LIFO batch:63 [ 0.038264] Normal zone: 22488 pages used for memmap [ 0.038265] Normal zone: 1439232 pages, LIFO batch:63 [ 0.080000] Reserving Intel graphics memory at [mem 0x9ba00000-0x9f9fffff] [ 0.080088] ACPI: PM-Timer IO Port: 0x1808 [ 0.080090] ACPI: Local APIC address 0xfee00000 [ 0.080107] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.080110] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.080112] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.080113] ACPI: IRQ0 used by override. [ 0.080114] ACPI: IRQ9 used by override. [ 0.080117] Using ACPI (MADT) for SMP configuration information [ 0.080118] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.080131] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.080153] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.080155] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff] [ 0.080157] PM: Registered nosave memory: [mem 0x00088000-0x000bffff] [ 0.080157] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff] [ 0.080159] PM: Registered nosave memory: [mem 0x93ebb000-0x93ebbfff] [ 0.080161] PM: Registered nosave memory: [mem 0x93ec2000-0x93ec2fff] [ 0.080162] PM: Registered nosave memory: [mem 0x93ec3000-0x93ec3fff] [ 0.080164] PM: Registered nosave memory: [mem 0x93ecf000-0x93ecffff] [ 0.080164] PM: Registered nosave memory: [mem 0x93ed0000-0x93ed0fff] [ 0.080166] PM: Registered nosave memory: [mem 0x93ee0000-0x93ee0fff] [ 0.080168] PM: Registered nosave memory: [mem 0x94d60000-0x95d5ffff] [ 0.080170] PM: Registered nosave memory: [mem 0x9a36f000-0x9aebefff] [ 0.080171] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff] [ 0.080171] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff] [ 0.080173] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff] [ 0.080174] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff] [ 0.080175] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.080175] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff] [ 0.080176] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff] [ 0.080177] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff] [ 0.080178] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff] [ 0.080178] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff] [ 0.080179] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.080180] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.080180] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff] [ 0.080181] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.080182] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.080184] [mem 0x9fa00000-0xdfffffff] available for PCI devices [ 0.080186] Booting paravirtualized kernel on bare hardware [ 0.080188] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.228644] random: get_random_bytes called from start_kernel+0x95/0x538 with crng_init=0 [ 0.228652] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1 [ 0.228928] percpu: Embedded 45 pages/cpu @(____ptrval____) s147456 r8192 d28672 u262144 [ 0.228937] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152 [ 0.228938] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.228961] Built 1 zonelists, mobility grouping on. Total pages: 2034363 [ 0.228962] Policy zone: Normal [ 0.228964] Kernel command line: initrd=\intel-ucode.img initrd=\EFI\custom\bisect.rd cryptdevice=PARTUUID=cf9d14dd-de5b-4e4e-9874-8badc535c98e:sys:allow-discards root=/dev/mapper/sys rw net.ifnames=0 quiet i915.fastboot=1 drm.debug=14 log_buf_len=4M emergency [ 0.233700] Calgary: detecting Calgary via BIOS EBDA area [ 0.233702] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.257900] Memory: 7952560K/8266712K available (12291K kernel code, 1285K rwdata, 3724K rodata, 1536K init, 3904K bss, 314152K reserved, 0K cma-reserved) [ 0.258094] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.258100] Kernel/User page tables isolation: enabled [ 0.258117] ftrace: allocating 35895 entries in 141 pages [ 0.276487] rcu: Preemptible hierarchical RCU implementation. [ 0.276488] rcu: CONFIG_RCU_FANOUT set to non-default value of 32. [ 0.276489] rcu: RCU dyntick-idle grace-period acceleration is enabled. [ 0.276490] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8. [ 0.276490] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.276491] Tasks RCU enabled. [ 0.276492] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.276493] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.278404] NR_IRQS: 20736, nr_irqs: 760, preallocated irqs: 16 [ 0.278609] rcu: Offload RCU callbacks from CPUs: (none). [ 0.278660] Console: colour dummy device 80x25 [ 0.278667] printk: console [tty0] enabled [ 0.278688] ACPI: Core revision 20181213 [ 0.278948] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.278956] hpet clockevent registered [ 0.278960] APIC: Switch to symmetric I/O mode setup [ 0.279603] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.295630] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2563be32fd6, max_idle_ns: 440795226961 ns [ 0.295644] Calibrating delay loop (skipped), value calculated using timer frequency.. 5189.96 BogoMIPS (lpj=8646350) [ 0.295647] pid_max: default: 32768 minimum: 301 [ 0.302338] LSM: Security Framework initializing [ 0.302340] Yama: becoming mindful. [ 0.302346] AppArmor: AppArmor disabled by boot time parameter [ 0.303656] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.306240] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.306278] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.306298] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.306567] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.306568] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.306573] mce: CPU supports 7 MCE banks [ 0.306590] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.306603] process: using mwait in idle threads [ 0.306607] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.306608] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.306610] Spectre V2 : Mitigation: Full generic retpoline [ 0.306611] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.306612] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.306620] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.306621] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.306624] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.306830] Freeing SMP alternatives memory: 28K [ 0.309040] TSC deadline timer enabled [ 0.309043] smpboot: CPU0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz (family: 0x6, model: 0x45, stepping: 0x1) [ 0.322315] mce: [Hardware Error]: Machine check events logged [ 0.322318] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 5: ae0000000040110a [ 0.322323] mce: [Hardware Error]: TSC 0 ADDR ffb070c0 MISC 38a0000086 [ 0.322329] mce: [Hardware Error]: PROCESSOR 0:40651 TIME 1552566992 SOCKET 0 APIC 0 microcode 24 [ 0.328973] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.329028] ... version: 3 [ 0.329029] ... bit width: 48 [ 0.329030] ... generic registers: 4 [ 0.329031] ... value mask: 0000ffffffffffff [ 0.329031] ... max period: 00007fffffffffff [ 0.329032] ... fixed-purpose events: 3 [ 0.329033] ... event mask: 000000070000000f [ 0.335635] rcu: Hierarchical SRCU implementation. [ 0.356278] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.362317] smp: Bringing up secondary CPUs ... [ 0.402316] x86: Booting SMP configuration: [ 0.402317] .... node #0, CPUs: #1 #2 #3 [ 0.482804] smp: Brought up 1 node, 4 CPUs [ 0.482804] smpboot: Max logical packages: 2 [ 0.482804] smpboot: Total of 4 processors activated (20759.87 BogoMIPS) [ 0.485899] devtmpfs: initialized [ 0.485899] x86/mm: Memory block size: 128MB [ 0.486463] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes) [ 0.486463] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.486463] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.486463] pinctrl core: initialized pinctrl subsystem [ 0.486463] RTC time: 12:36:32, date: 2019-03-14 [ 0.486463] NET: Registered protocol family 16 [ 0.486463] audit: initializing netlink subsys (disabled) [ 0.486463] audit: type=2000 audit(1552566992.206:1): state=initialized audit_enabled=0 res=1 [ 0.486463] cpuidle: using governor ladder [ 0.488976] cpuidle: using governor menu [ 0.489026] Simple Boot Flag at 0x44 set to 0x1 [ 0.489058] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.489059] ACPI: bus type PCI registered [ 0.489060] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.489133] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.489148] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.489148] PCI: Using configuration type 1 for base access [ 0.489148] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.490273] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.490273] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.490273] fbcon: Taking over console [ 0.490273] ipmi:dmi: Base address is zero, assuming no IPMI interface [ 0.490273] ACPI: Added _OSI(Module Device) [ 0.490273] ACPI: Added _OSI(Processor Device) [ 0.490273] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.490273] ACPI: Added _OSI(Processor Aggregator Device) [ 0.490273] ACPI: Added _OSI(Linux-Dell-Video) [ 0.490273] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.490273] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.509598] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.511642] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.511888] ACPI: Dynamic OEM Table Load: [ 0.511896] ACPI: SSDT 0xFFFF91395567C000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20130117) [ 0.512735] ACPI: Dynamic OEM Table Load: [ 0.512743] ACPI: SSDT 0xFFFF913955467800 0005AA (v01 PmRef ApIst 00003000 INTL 20130117) [ 0.513616] ACPI: Dynamic OEM Table Load: [ 0.513622] ACPI: SSDT 0xFFFF913955680C00 000119 (v01 PmRef ApCst 00003000 INTL 20130117) [ 0.515232] ACPI: EC: EC started [ 0.515233] ACPI: EC: interrupt blocked [ 0.675660] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.675663] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.675664] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 0.675665] ACPI: Interpreter enabled [ 0.675708] ACPI: (supports S0 S3 S4 S5) [ 0.675709] ACPI: Using IOAPIC for interrupt routing [ 0.675746] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.676291] ACPI: Enabled 9 GPEs in block 00 to 7F [ 0.686139] ACPI: Power Resource [AMD3] (on) [ 0.686174] ACPI: Power Resource [AMD2] (on) [ 0.693133] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.693140] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.693990] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.693991] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.694719] PCI host bridge to bus 0000:00 [ 0.694722] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.694724] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.694726] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.694728] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.694729] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.694731] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.694733] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.694734] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.694736] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.694737] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.694739] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.694743] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.694744] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.694746] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.694747] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.694749] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] [ 0.694751] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window] [ 0.694753] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.694762] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 0.694980] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 [ 0.694994] pci 0000:00:02.0: reg 0x10: [mem 0xb0400000-0xb07fffff 64bit] [ 0.695002] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.695007] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 0.695022] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.695220] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 0.695233] pci 0000:00:03.0: reg 0x10: [mem 0xb0c10000-0xb0c13fff 64bit] [ 0.695467] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 0.695488] pci 0000:00:14.0: reg 0x10: [mem 0xb0c00000-0xb0c0ffff 64bit] [ 0.695549] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.695750] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 [ 0.695774] pci 0000:00:16.0: reg 0x10: [mem 0xb0c18000-0xb0c1801f 64bit] [ 0.695846] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.696043] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 0.696064] pci 0000:00:1b.0: reg 0x10: [mem 0xb0c14000-0xb0c17fff 64bit] [ 0.696134] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.696324] pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400 [ 0.696403] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.696675] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400 [ 0.696753] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.697017] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400 [ 0.697095] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.697300] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 [ 0.698971] pci 0000:00:1d.0: reg 0x10: [mem 0xb0c1c000-0xb0c1c3ff] [ 0.704087] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.704292] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 [ 0.704594] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 [ 0.704611] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f] [ 0.704618] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097] [ 0.704625] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087] [ 0.704633] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093] [ 0.704640] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f] [ 0.704647] pci 0000:00:1f.2: reg 0x24: [mem 0xb0c1b000-0xb0c1b7ff] [ 0.704684] pci 0000:00:1f.2: PME# supported from D3hot [ 0.704870] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 [ 0.704888] pci 0000:00:1f.3: reg 0x10: [mem 0xb0c19000-0xb0c190ff 64bit] [ 0.704908] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f] [ 0.705184] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000 [ 0.705223] pci 0000:01:00.0: reg 0x10: [io 0x4000-0x40ff] [ 0.705256] pci 0000:01:00.0: reg 0x18: [mem 0xb0b00000-0xb0b00fff 64bit] [ 0.705279] pci 0000:01:00.0: reg 0x20: [mem 0xb0800000-0xb0803fff 64bit pref] [ 0.705400] pci 0000:01:00.0: supports D1 D2 [ 0.705402] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.705553] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.705557] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.705560] pci 0000:00:1c.0: bridge window [mem 0xb0b00000-0xb0bfffff] [ 0.705565] pci 0000:00:1c.0: bridge window [mem 0xb0800000-0xb08fffff 64bit pref] [ 0.705664] pci 0000:02:00.0: [8086:08b3] type 00 class 0x028000 [ 0.705734] pci 0000:02:00.0: reg 0x10: [mem 0xb0a00000-0xb0a01fff 64bit] [ 0.705954] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.706143] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.706148] pci 0000:00:1c.3: bridge window [mem 0xb0a00000-0xb0afffff] [ 0.706239] pci 0000:03:00.0: [1002:6900] type 00 class 0x038000 [ 0.706297] pci 0000:03:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.706321] pci 0000:03:00.0: reg 0x18: [mem 0xb0000000-0xb01fffff 64bit pref] [ 0.706334] pci 0000:03:00.0: reg 0x20: [io 0x3000-0x30ff] [ 0.706348] pci 0000:03:00.0: reg 0x24: [mem 0xb0900000-0xb093ffff] [ 0.706362] pci 0000:03:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.706377] pci 0000:03:00.0: enabling Extended Tags [ 0.706512] pci 0000:03:00.0: supports D1 D2 [ 0.706577] pci 0000:03:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 63.008 Gb/s with 8 GT/s x8 link) [ 0.706688] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.706691] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.706694] pci 0000:00:1c.4: bridge window [mem 0xb0900000-0xb09fffff] [ 0.706699] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xb01fffff 64bit pref] [ 0.787522] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.787603] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.787682] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.787760] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.787838] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.787916] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.787994] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.788072] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.788477] ACPI: EC: interrupt unblocked [ 0.788477] ACPI: EC: event unblocked [ 0.788477] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.788477] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.788481] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.788481] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.788481] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.788481] vgaarb: loaded [ 0.788481] ACPI: bus type USB registered [ 0.788481] usbcore: registered new interface driver usbfs [ 0.788481] usbcore: registered new interface driver hub [ 0.788481] usbcore: registered new device driver usb [ 0.967591] pps_core: LinuxPPS API ver. 1 registered [ 0.967592] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.967595] PTP clock support registered [ 0.967602] EDAC MC: Ver: 3.0.0 [ 0.967691] Registered efivars operations [ 1.156134] PCI: Using ACPI for IRQ routing [ 1.162335] PCI: pci_cache_line_size set to 64 bytes [ 1.162412] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff] [ 1.162414] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff] [ 1.162415] e820: reserve RAM buffer [mem 0x93ebb018-0x93ffffff] [ 1.162417] e820: reserve RAM buffer [mem 0x93ec3018-0x93ffffff] [ 1.162418] e820: reserve RAM buffer [mem 0x93ed0018-0x93ffffff] [ 1.162420] e820: reserve RAM buffer [mem 0x94d60000-0x97ffffff] [ 1.162421] e820: reserve RAM buffer [mem 0x9a36f000-0x9bffffff] [ 1.162423] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff] [ 1.162424] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff] [ 1.162537] NetLabel: Initializing [ 1.162538] NetLabel: domain hash size = 128 [ 1.162539] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.162554] NetLabel: unlabeled traffic allowed by default [ 1.162712] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.162718] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.164743] clocksource: Switched to clocksource tsc-early [ 1.174874] VFS: Disk quotas dquot_6.6.0 [ 1.174898] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.174981] pnp: PnP ACPI init [ 1.175183] system 00:00: [io 0x0680-0x069f] has been reserved [ 1.175186] system 00:00: [io 0xfd60-0xfd63] has been reserved [ 1.175188] system 00:00: [io 0xffff] has been reserved [ 1.175190] system 00:00: [io 0xffff] has been reserved [ 1.175192] system 00:00: [io 0xffff] has been reserved [ 1.175194] system 00:00: [io 0x1800-0x18fe] has been reserved [ 1.175196] system 00:00: [io 0x164e-0x164f] has been reserved [ 1.175202] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.175269] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.175336] system 00:02: [io 0x1854-0x1857] has been reserved [ 1.175341] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 1.175394] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.175426] pnp 00:04: Plug and Play ACPI device, IDs DLL063f PNP0f13 (active) [ 1.252536] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.252538] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.252540] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.252542] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.252544] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 1.252548] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.252550] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 1.252552] system 00:05: [mem 0xff000000-0xff000fff] has been reserved [ 1.252554] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved [ 1.252556] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.252558] system 00:05: [mem 0x9fa21000-0x9fa21fff] has been reserved [ 1.252560] system 00:05: [mem 0x9fa10000-0x9fa1ffff] has been reserved [ 1.252565] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.253033] system 00:06: [mem 0xb0c1f000-0xb0c1ffff] has been reserved [ 1.253035] system 00:06: [mem 0xb0c1d000-0xb0c1dfff] has been reserved [ 1.253040] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.254134] pnp: PnP ACPI: found 7 devices [ 1.260122] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.260128] pci 0000:03:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 1.260152] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.260155] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 1.260160] pci 0000:00:1c.0: bridge window [mem 0xb0b00000-0xb0bfffff] [ 1.260164] pci 0000:00:1c.0: bridge window [mem 0xb0800000-0xb08fffff 64bit pref] [ 1.260169] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 1.260173] pci 0000:00:1c.3: bridge window [mem 0xb0a00000-0xb0afffff] [ 1.260183] pci 0000:03:00.0: BAR 6: assigned [mem 0xb0940000-0xb095ffff pref] [ 1.260185] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 1.260188] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 1.260192] pci 0000:00:1c.4: bridge window [mem 0xb0900000-0xb09fffff] [ 1.260195] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xb01fffff 64bit pref] [ 1.260202] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.260204] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.260206] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.260207] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 1.260209] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 1.260211] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 1.260213] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 1.260214] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 1.260216] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 1.260218] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 1.260220] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 1.260221] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 1.260223] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 1.260225] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 1.260226] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 1.260228] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] [ 1.260230] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff window] [ 1.260232] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 1.260234] pci_bus 0000:01: resource 1 [mem 0xb0b00000-0xb0bfffff] [ 1.260235] pci_bus 0000:01: resource 2 [mem 0xb0800000-0xb08fffff 64bit pref] [ 1.260237] pci_bus 0000:02: resource 1 [mem 0xb0a00000-0xb0afffff] [ 1.260239] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 1.260241] pci_bus 0000:03: resource 1 [mem 0xb0900000-0xb09fffff] [ 1.260242] pci_bus 0000:03: resource 2 [mem 0xa0000000-0xb01fffff 64bit pref] [ 1.260441] NET: Registered protocol family 2 [ 1.260604] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) [ 1.260639] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.260760] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.260888] TCP: Hash tables configured (established 65536 bind 65536) [ 1.260927] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.260954] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.261020] NET: Registered protocol family 1 [ 1.261025] NET: Registered protocol family 44 [ 1.261035] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.279102] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6ad took 16212 usecs [ 1.279136] PCI: CLS 64 bytes, default 64 [ 1.279175] Unpacking initramfs... [ 1.560919] Freeing initrd memory: 16796K [ 1.560933] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.560935] software IO TLB: mapped [mem 0x8ed70000-0x92d70000] (64MB) [ 1.561122] check: Scanning for low memory corruption every 60 seconds [ 1.561787] Initialise system trusted keyrings [ 1.561797] Key type blacklist registered [ 1.561854] workingset: timestamp_bits=41 max_order=21 bucket_order=0 [ 1.563367] zbud: loaded [ 1.613595] Key type asymmetric registered [ 1.613597] Asymmetric key parser 'x509' registered [ 1.613610] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.613661] io scheduler mq-deadline registered [ 1.613663] io scheduler kyber registered [ 1.613722] io scheduler bfq registered [ 1.614165] pcieport 0000:00:1c.0: Signaling PME with IRQ 40 [ 1.614384] pcieport 0000:00:1c.3: Signaling PME with IRQ 41 [ 1.614595] pcieport 0000:00:1c.4: Signaling PME with IRQ 42 [ 1.614655] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.614749] efifb: probing for efifb [ 1.614767] efifb: showing boot graphics [ 1.615412] efifb: framebuffer at 0xc0000000, using 4128k, total 4128k [ 1.615413] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 1.615414] efifb: scrolling: redraw [ 1.615416] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.615515] Console: switching to colour frame buffer device 170x48 [ 1.618002] fb0: EFI VGA frame buffer device [ 1.618013] intel_idle: MWAIT substates: 0x11142120 [ 1.618014] intel_idle: v0.4.1 model 0x45 [ 1.618326] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.618391] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input0 [ 1.619005] ACPI: Lid Switch [LID0] [ 1.619057] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input1 [ 1.619065] ACPI: Power Button [PWRB] [ 1.619099] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input2 [ 1.619106] ACPI: Sleep Button [SLPB] [ 1.619174] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.622370] ACPI: Power Button [PWRF] [ 1.623265] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.624573] usbcore: registered new interface driver usbserial_generic [ 1.624580] usbserial: USB Serial support registered for generic [ 1.624598] rtc_cmos 00:01: RTC can wake from S4 [ 1.624748] rtc_cmos 00:01: registered as rtc0 [ 1.624765] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.624827] intel_pstate: Intel P-state driver initializing [ 1.625080] ledtrig-cpu: registered to indicate activity on CPUs [ 1.625711] NET: Registered protocol family 10 [ 1.640466] Segment Routing with IPv6 [ 1.640499] NET: Registered protocol family 17 [ 1.641096] RAS: Correctable Errors collector initialized. [ 1.641162] microcode: sig=0x40651, pf=0x40, revision=0x24 [ 1.641257] microcode: Microcode Update Driver: v2.2. [ 1.641272] sched_clock: Marking stable (1640914177, 333621)->(1666590523, -25342725) [ 1.641616] registered taskstats version 1 [ 1.641626] Loading compiled-in X.509 certificates [ 1.641650] zswap: loaded using pool lzo/zbud [ 1.649851] Key type big_key registered [ 1.650284] Magic number: 11:884:632 [ 1.650373] rtc_cmos 00:01: setting system clock to 2019-03-14T12:36:33 UTC (1552566993) [ 1.651149] Freeing unused decrypted memory: 2040K [ 1.651373] Freeing unused kernel image memory: 1536K [ 1.679098] Write protecting the kernel read-only data: 18432k [ 1.679918] Freeing unused kernel image memory: 2016K [ 1.680098] Freeing unused kernel image memory: 372K [ 1.695787] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.695787] x86/mm: Checking user space page tables [ 1.703407] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.703408] Run /init as init process [ 2.096470] Linux agpgart interface v0.103 [ 2.135988] [drm:intel_pch_type [i915]] Found LynxPoint LP PCH [ 2.136019] [drm:i915_driver_load [i915]] WOPCM size: 1024KiB [ 2.136057] [drm:intel_uc_init_early [i915]] enable_guc=0 (submission:no huc:no) [ 2.136087] [drm:i915_driver_load [i915]] guc_log_level=0 (enabled:no, verbose:no, verbosity:0) [ 2.136123] [drm:intel_power_domains_init [i915]] Allowed DC state mask 00 [ 2.136231] [drm:i915_ggtt_probe_hw [i915]] GGTT size = 2048M [ 2.136265] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M [ 2.136298] [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M [ 2.136300] checking generic (c0000000 408000) vs hw (c0000000 10000000) [ 2.136301] fb0: switching to inteldrmfb from EFI VGA [ 2.136317] Console: switching to colour dummy device 80x25 [ 2.136392] i915 0000:00:02.0: vgaarb: deactivate vga console [ 2.136451] [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 9f900017 [ 2.136498] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K [ 2.136574] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params [ 2.136613] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x9afb2018 [ 2.136657] [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 [ 2.136695] [drm:intel_opregion_setup [i915]] Public ACPI methods supported [ 2.136732] [drm:intel_opregion_setup [i915]] SWSCI supported [ 2.137792] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 [ 2.137831] [drm:intel_opregion_setup [i915]] ASLE supported [ 2.137869] [drm:intel_opregion_setup [i915]] ASLE extension supported [ 2.137909] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 2.137910] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.137910] [drm] Driver supports precise vblank timestamp query. [ 2.137951] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz [ 2.138002] [drm:intel_bios_init [i915]] VBT signature "$VBT HASWELL ", BDB version 177 [ 2.138055] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 2.138109] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 0 [ 2.138839] [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) [ 2.138892] [drm:intel_bios_init [i915]] Panel type: 2 (VBT) [ 2.138946] [drm:intel_bios_init [i915]] DRRS supported mode is seamless [ 2.139007] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables: [ 2.139037] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 2.139091] [drm:intel_bios_init [i915]] VBT initial LVDS value 300 [ 2.139146] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 13, level 255, controller 0 [ 2.139201] [drm:intel_bios_init [i915]] Found SDVO panel mode in BIOS VBT tables: [ 2.139218] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1600x1200": 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 2.139272] [drm:intel_bios_init [i915]] DRRS State Enabled:0 [ 2.139327] [drm:intel_bios_init [i915]] No SDVO device info is found in VBT [ 2.139382] [drm:intel_bios_init [i915]] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 TCUSB:0 TBT:0 [ 2.139435] [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0 [ 2.139490] [drm:intel_bios_init [i915]] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 TCUSB:0 TBT:0 [ 2.139544] [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 6 [ 2.139605] [drm:intel_dsm_detect [i915]] no _DSM method for intel device [ 2.139651] [drm:i915_driver_load [i915]] rawclk rate: 24000 kHz [ 2.139696] [drm:intel_power_well_enable [i915]] enabling always-on [ 2.139740] [drm:intel_power_well_enable [i915]] enabling display [ 2.139745] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.140190] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 [ 2.140235] [drm:intel_print_wm_latency [i915]] Primary WM0 latency 20 (2.0 usec) [ 2.140278] [drm:intel_print_wm_latency [i915]] Primary WM1 latency 4 (2.0 usec) [ 2.140321] [drm:intel_print_wm_latency [i915]] Primary WM2 latency 36 (18.0 usec) [ 2.140352] [drm:intel_print_wm_latency [i915]] Primary WM3 latency 90 (45.0 usec) [ 2.140390] [drm:intel_print_wm_latency [i915]] Primary WM4 latency 160 (80.0 usec) [ 2.140417] [drm:intel_print_wm_latency [i915]] Sprite WM0 latency 20 (2.0 usec) [ 2.140445] [drm:intel_print_wm_latency [i915]] Sprite WM1 latency 4 (2.0 usec) [ 2.140472] [drm:intel_print_wm_latency [i915]] Sprite WM2 latency 36 (18.0 usec) [ 2.140500] [drm:intel_print_wm_latency [i915]] Sprite WM3 latency 90 (45.0 usec) [ 2.140527] [drm:intel_print_wm_latency [i915]] Sprite WM4 latency 160 (80.0 usec) [ 2.140555] [drm:intel_print_wm_latency [i915]] Cursor WM0 latency 20 (2.0 usec) [ 2.140582] [drm:intel_print_wm_latency [i915]] Cursor WM1 latency 4 (2.0 usec) [ 2.140610] [drm:intel_print_wm_latency [i915]] Cursor WM2 latency 36 (18.0 usec) [ 2.140637] [drm:intel_print_wm_latency [i915]] Cursor WM3 latency 90 (45.0 usec) [ 2.140665] [drm:intel_print_wm_latency [i915]] Cursor WM4 latency 160 (80.0 usec) [ 2.140700] [drm:intel_modeset_init [i915]] 3 display pipes available. [ 2.140764] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 450000 kHz, VCO 0 kHz, ref 0 kHz, bypass 0 kHz, voltage level 0 [ 2.140800] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 450000 kHz [ 2.140835] [drm:intel_modeset_init [i915]] Max dotclock rate: 450000 kHz [ 2.141174] [drm:intel_bios_port_aux_ch [i915]] using AUX A for port A (VBT) [ 2.141208] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port A [ 2.141251] [drm:intel_pps_dump_state [i915]] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000 [ 2.141285] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 2.141319] [drm:intel_dp_init_panel_power_sequencer [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 [ 2.141353] [drm:intel_dp_init_panel_power_sequencer [i915]] backlight on delay 1, off delay 200 [ 2.141391] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 2.141428] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on [ 2.141466] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f [ 2.142111] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 81 41 00 00 01 00 02 00 00 00 00 00 00 [ 2.142674] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 2.143092] [drm:intel_dp_init_connector [i915]] eDP DPCD: 01 00 04 [ 2.148976] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 2.149001] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 2.149020] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 2.149055] [drm:intel_dp_init_connector [i915]] VBT doesn't support DRRS [ 2.149091] [drm:lpt_setup_backlight [i915]] CPU backlight register was enabled, switching to PCH override [ 2.149126] [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, enabled, brightness 937/937 [ 2.149166] [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (platform default) [ 2.149199] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B [ 2.149234] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT) [ 2.149274] [drm:intel_modeset_init [i915]] VBT says port C is not DVI/HDMI/DP compatible, respect it [ 2.149377] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:41:pipe A] hw state readout: enabled [ 2.149414] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:53:pipe B] hw state readout: disabled [ 2.149451] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:65:pipe C] hw state readout: disabled [ 2.149487] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:30:primary A] hw state readout: enabled, pipe A [ 2.149523] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:sprite A] hw state readout: disabled, pipe A [ 2.149559] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:38:cursor A] hw state readout: disabled, pipe A [ 2.149595] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:primary B] hw state readout: disabled, pipe B [ 2.149631] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:45:sprite B] hw state readout: disabled, pipe B [ 2.149667] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:50:cursor B] hw state readout: disabled, pipe B [ 2.149702] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:54:primary C] hw state readout: disabled, pipe C [ 2.149738] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:sprite C] hw state readout: disabled, pipe C [ 2.149774] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:62:cursor C] hw state readout: disabled, pipe C [ 2.149811] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0 [ 2.149847] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 2.149882] [drm:intel_modeset_setup_hw_state [i915]] SPLL hw state readout: crtc_mask 0x00000001, on 1 [ 2.149917] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1 [ 2.149953] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 hw state readout: crtc_mask 0x00000000, on 1 [ 2.149988] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1 [ 2.150027] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:66:DDI A] hw state readout: enabled, pipe A [ 2.150063] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:72:DDI B] hw state readout: disabled, pipe A [ 2.150099] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:67:eDP-1] hw state readout: enabled [ 2.150135] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:73:HDMI-A-1] hw state readout: disabled [ 2.150176] [drm:intel_dump_pipe_config [i915]] [CRTC:41:pipe A][setup_hw_state] [ 2.150212] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100) [ 2.150246] [drm:intel_dump_pipe_config [i915]] output format: RGB [ 2.150282] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 0 [ 2.150318] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 5347087, gmch_n: 8388608, link_m: 148530, link_n: 524288, tu: 64 [ 2.150352] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 2.150388] [drm:intel_dump_pipe_config [i915]] infoframes enabled: 0x0 [ 2.150423] [drm:intel_dump_pipe_config [i915]] requested mode: [ 2.150434] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 76490 1366 1374 1384 1558 768 771 772 816 0x40 0x9 [ 2.150468] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 2.150480] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 76490 1366 1374 1384 1558 768 771 772 816 0x40 0x9 [ 2.150515] [drm:intel_dump_pipe_config [i915]] crtc timings: 76490 1366 1374 1384 1558 768 771 772 816, type: 0x40 flags: 0x9 [ 2.150550] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1366x768, pixel rate 76490 [ 2.150584] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.150619] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 2.150654] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000 [ 2.150689] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 2.150724] [drm:intel_dump_pipe_config [i915]] [PLANE:30:primary A] disabled, scaler_id = -1 [ 2.150759] [drm:intel_dump_pipe_config [i915]] [PLANE:33:sprite A] disabled, scaler_id = -1 [ 2.150793] [drm:intel_dump_pipe_config [i915]] [PLANE:38:cursor A] disabled, scaler_id = -1 [ 2.150828] [drm:intel_dump_pipe_config [i915]] [CRTC:53:pipe B][setup_hw_state] [ 2.150863] [drm:intel_dump_pipe_config [i915]] output_types: (0x0) [ 2.150898] [drm:intel_dump_pipe_config [i915]] output format: Invalid [ 2.150933] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0 [ 2.150968] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 2.151003] [drm:intel_dump_pipe_config [i915]] infoframes enabled: 0x0 [ 2.151038] [drm:intel_dump_pipe_config [i915]] requested mode: [ 2.151049] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.151083] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 2.151094] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.151130] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 2.151165] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 2.151200] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.151235] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 2.151270] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 2.151305] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 2.151341] [drm:intel_dump_pipe_config [i915]] [PLANE:42:primary B] disabled, scaler_id = -1 [ 2.151376] [drm:intel_dump_pipe_config [i915]] [PLANE:45:sprite B] disabled, scaler_id = -1 [ 2.151411] [drm:intel_dump_pipe_config [i915]] [PLANE:50:cursor B] disabled, scaler_id = -1 [ 2.151446] [drm:intel_dump_pipe_config [i915]] [CRTC:65:pipe C][setup_hw_state] [ 2.151481] [drm:intel_dump_pipe_config [i915]] output_types: (0x0) [ 2.151516] [drm:intel_dump_pipe_config [i915]] output format: Invalid [ 2.151550] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0 [ 2.151583] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 2.151615] [drm:intel_dump_pipe_config [i915]] infoframes enabled: 0x0 [ 2.151650] [drm:intel_dump_pipe_config [i915]] requested mode: [ 2.151661] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.151696] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 2.151707] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.151742] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 2.151778] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 2.151813] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.151848] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 2.151883] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 2.151918] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 2.151952] [drm:intel_dump_pipe_config [i915]] [PLANE:54:primary C] disabled, scaler_id = -1 [ 2.151987] [drm:intel_dump_pipe_config [i915]] [PLANE:57:sprite C] disabled, scaler_id = -1 [ 2.152022] [drm:intel_dump_pipe_config [i915]] [PLANE:62:cursor C] disabled, scaler_id = -1 [ 2.152058] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 enabled but not in use, disabling [ 2.152093] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 enabled but not in use, disabling [ 2.152128] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 enabled but not in use, disabling [ 2.152171] [drm:i9xx_get_initial_plane_config [i915]] pipe A/primary A with fb: size=1366x768@32, offset=0, pitch 5504, size 0x408000 [ 2.152203] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, gtt_offset=0x0000000000000000, size=0x0000000000408000 [ 2.152246] [drm:intel_alloc_initial_plane_obj.isra.113 [i915]] initial plane fb obj 000000003a2e38d3 [ 2.164551] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [409000, 80000000] [ 2.165915] [drm:i915_gem_contexts_init [i915]] logical context support initialized [ 2.166023] [drm:intel_init_gt_powersave [i915]] Overclocking supported, max: 1100MHz, overclock: 1100MHz [ 2.166215] [drm:sandybridge_pcode_read [i915]] warning: pcode (read from mbox 5) mailbox access failed for intel_enable_gt_powersave [i915]: -6 [ 2.166448] [drm:intel_fbdev_init [i915]] found possible fb from plane A [ 2.166492] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping [ 2.166536] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping [ 2.166579] [drm:intel_fbdev_init [i915]] checking plane A for BIOS fb [ 2.166622] [drm:intel_fbdev_init [i915]] pipe A area: 1366x768, bpp: 32, size: 4227072 [ 2.166666] [drm:intel_fbdev_init [i915]] fb big enough for plane A (4227072 >= 4227072) [ 2.166719] [drm:intel_fbdev_init [i915]] pipe B not active, skipping [ 2.166757] [drm:intel_fbdev_init [i915]] pipe C not active, skipping [ 2.166796] [drm:intel_fbdev_init [i915]] using BIOS fb for initial console [ 2.167389] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered [ 2.167445] [drm:intel_dp_connector_register [i915]] registering DPDDC-A bus for card0-eDP-1 [ 2.167550] [drm] Initialized i915 1.6.0 20190220 for 0000:00:02.0 on minor 0 [ 2.167694] [drm:intel_opregion_resume [i915]] 2 outputs detected [ 2.174047] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.174437] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 [ 2.174568] [drm:intel_power_well_disable [i915]] disabling display [ 2.174583] [drm:drm_setup_crtcs [drm_kms_helper]] [ 2.174596] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:eDP-1] [ 2.174599] i915 device info: pciid=0x0a16 rev=0x0b platform=HASWELL gen=7 [ 2.174601] i915 device info: is_mobile: no [ 2.174681] [drm:intel_dp_detect [i915]] [CONNECTOR:67:eDP-1] [ 2.174683] i915 device info: is_lp: no [ 2.174685] i915 device info: is_alpha_support: no [ 2.174765] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 2.174767] i915 device info: has_64bit_reloc: no [ 2.174847] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 2.174849] i915 device info: gpu_reset_clobbers_display: no [ 2.174928] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 2.174930] i915 device info: has_reset_engine: no [ 2.174932] i915 device info: has_fpga_dbg: yes [ 2.174934] i915 device info: has_guc: no [ 2.174935] i915 device info: has_guc_ct: no [ 2.174937] i915 device info: has_l3_dpf: yes [ 2.174939] i915 device info: has_llc: yes [ 2.174941] i915 device info: has_logical_ring_contexts: no [ 2.174943] i915 device info: has_logical_ring_elsq: no [ 2.174945] i915 device info: has_logical_ring_preemption: no [ 2.174947] i915 device info: has_pooled_eu: no [ 2.174949] i915 device info: has_rc6: yes [ 2.174951] i915 device info: has_rc6p: no [ 2.174953] i915 device info: has_runtime_pm: yes [ 2.174955] i915 device info: has_snoop: no [ 2.174957] i915 device info: has_coherent_ggtt: yes [ 2.174958] i915 device info: unfenced_needs_alignment: no [ 2.174960] i915 device info: hws_needs_physical: no [ 2.174962] i915 device info: cursor_needs_physical: no [ 2.174964] i915 device info: has_csr: no [ 2.174966] i915 device info: has_ddi: yes [ 2.174968] i915 device info: has_dp_mst: yes [ 2.174970] i915 device info: has_fbc: yes [ 2.174972] i915 device info: has_gmch: no [ 2.174974] i915 device info: has_hotplug: yes [ 2.174976] i915 device info: has_ipc: no [ 2.174978] i915 device info: has_overlay: no [ 2.174980] i915 device info: has_psr: yes [ 2.174981] i915 device info: overlay_needs_physical: no [ 2.174983] i915 device info: supports_tv: no [ 2.174986] i915 device info: slice total: 1, mask=0001 [ 2.174988] i915 device info: subslice total: 2 [ 2.174990] i915 device info: slice0: 2 subslices, mask=0003 [ 2.174992] i915 device info: EU total: 20 [ 2.174994] i915 device info: EU per subslice: 10 [ 2.174996] i915 device info: has slice power gating: no [ 2.174998] i915 device info: has subslice power gating: no [ 2.175000] i915 device info: has EU power gating: no [ 2.175002] i915 device info: CS timestamp frequency: 12500 kHz [ 2.175516] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 2.175579] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes [ 2.176310] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:eDP-1] status updated from unknown to connected [ 2.176338] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 2.176361] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 2.176380] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 2.176422] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:eDP-1] probed modes : [ 2.176442] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 2.176461] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 48 61040 1366 1374 1384 1558 768 771 772 816 0x40 0x9 [ 2.176470] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] [ 2.176536] [drm:intel_hdmi_detect [i915]] [CONNECTOR:73:HDMI-A-1] [ 2.176768] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.176833] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.177059] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.177081] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 2.177145] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 2.177210] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 2.177917] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 2.177981] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 2.178209] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.178270] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.178496] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.178508] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 2.178518] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] status updated from unknown to disconnected [ 2.178529] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] disconnected [ 2.178538] [drm:drm_setup_crtcs [drm_kms_helper]] connector 67 enabled? yes [ 2.178547] [drm:drm_setup_crtcs [drm_kms_helper]] connector 73 enabled? no [ 2.178616] [drm:intel_fb_initial_config [i915]] looking for cmdline mode on connector eDP-1 [ 2.178683] [drm:intel_fb_initial_config [i915]] looking for preferred mode on connector eDP-1 0 [ 2.178750] [drm:intel_fb_initial_config [i915]] connector eDP-1 on [CRTC:41:pipe A]: 1366x768 [ 2.178816] [drm:intel_fb_initial_config [i915]] connector HDMI-A-1 not enabled, skipping [ 2.178828] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1366x768 set on crtc 41 (0,0) [ 2.178895] [drm:intelfb_create [i915]] re-using BIOS fb [ 2.178966] [drm:intelfb_create [i915]] allocated 1366x768 fb: 0x00000000 [ 2.179048] fbcon: inteldrmfb (fb0) is primary device [ 2.179196] [drm:intel_atomic_check [i915]] [CONNECTOR:67:eDP-1] Limiting display bpp to 18 instead of EDID bpp 18, requested bpp 36, max platform bpp 36 [ 2.179285] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 18 pixel clock 76300KHz [ 2.179372] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 2.179439] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 2.179498] [drm:intel_dp_compute_config [i915]] DP link rate required 171675 available 270000 [ 2.179564] [drm:intel_atomic_check [i915]] hw max bpp: 18, pipe bpp: 18, dithering: 1 [ 2.179631] [drm:intel_dump_pipe_config [i915]] [CRTC:41:pipe A][fastset] [ 2.179692] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100) [ 2.179759] [drm:intel_dump_pipe_config [i915]] output format: RGB [ 2.179828] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 2.179896] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 5347087, gmch_n: 8388608, link_m: 148530, link_n: 524288, tu: 64 [ 2.179963] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 2.180030] [drm:intel_dump_pipe_config [i915]] infoframes enabled: 0x0 [ 2.180098] [drm:intel_dump_pipe_config [i915]] requested mode: [ 2.180120] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 2.180187] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 2.180208] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 2.180278] [drm:intel_dump_pipe_config [i915]] crtc timings: 76300 1366 1374 1384 1558 768 771 772 816, type: 0x48 flags: 0x9 [ 2.180346] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1366x768, pixel rate 76300 [ 2.180414] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.180482] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 2.180550] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000 [ 2.180617] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 2.180687] [drm:intel_dump_pipe_config [i915]] [PLANE:30:primary A] FB:80, fb = 1366x768 format = XR24 little-endian (0x34325258) [ 2.180755] [drm:intel_dump_pipe_config [i915]] [PLANE:33:sprite A] disabled, scaler_id = -1 [ 2.180823] [drm:intel_dump_pipe_config [i915]] [PLANE:38:cursor A] disabled, scaler_id = -1 [ 2.180911] [drm:intel_ddi_update_pipe [i915]] Panel doesn't support DRRS [ 2.188398] [drm:verify_connector_state.isra.70 [i915]] [CONNECTOR:67:eDP-1] [ 2.188475] [drm:intel_atomic_commit_tail [i915]] [CRTC:41:pipe A] [ 2.188562] [drm:verify_single_dpll_state.isra.71 [i915]] SPLL [ 2.188571] Console: switching to colour frame buffer device 170x48 [ 2.198670] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.225769] [drm:drm_fb_helper_hotplug_event.part.29 [drm_kms_helper]] [ 2.225789] [drm:drm_setup_crtcs [drm_kms_helper]] [ 2.225808] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:eDP-1] [ 2.225899] [drm:intel_dp_detect [i915]] [CONNECTOR:67:eDP-1] [ 2.225983] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 2.226061] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 2.226135] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 2.226732] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 2.226797] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes [ 2.227556] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 2.227588] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 2.227616] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 2.227673] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:eDP-1] probed modes : [ 2.227702] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 2.227730] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 48 61040 1366 1374 1384 1558 768 771 772 816 0x40 0x9 [ 2.227743] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] [ 2.227805] [drm:intel_hdmi_detect [i915]] [CONNECTOR:73:HDMI-A-1] [ 2.228037] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.228093] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.228317] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.228346] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 2.228403] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 2.228458] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 2.229203] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 2.229261] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 2.229489] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.229553] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.229777] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.229794] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 2.229808] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] disconnected [ 2.229821] [drm:drm_setup_crtcs [drm_kms_helper]] connector 67 enabled? yes [ 2.229833] [drm:drm_setup_crtcs [drm_kms_helper]] connector 73 enabled? no [ 2.229895] [drm:intel_fb_initial_config [i915]] looking for cmdline mode on connector eDP-1 [ 2.229954] [drm:intel_fb_initial_config [i915]] looking for preferred mode on connector eDP-1 0 [ 2.230014] [drm:intel_fb_initial_config [i915]] connector eDP-1 on [CRTC:41:pipe A]: 1366x768 [ 2.230070] [drm:intel_fb_initial_config [i915]] connector HDMI-A-1 not enabled, skipping [ 2.230085] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1366x768 set on crtc 41 (0,0) [ 2.235040] [drm:drm_fb_helper_hotplug_event.part.29 [drm_kms_helper]] [ 2.235047] [drm:drm_setup_crtcs [drm_kms_helper]] [ 2.235056] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:eDP-1] [ 2.235097] [drm:intel_dp_detect [i915]] [CONNECTOR:67:eDP-1] [ 2.235137] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 2.235179] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 2.235227] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 2.235807] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 2.235849] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes [ 2.236585] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 2.236606] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 2.236623] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 2.236659] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:eDP-1] probed modes : [ 2.236677] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 2.236694] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 48 61040 1366 1374 1384 1558 768 771 772 816 0x40 0x9 [ 2.236702] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] [ 2.236740] [drm:intel_hdmi_detect [i915]] [CONNECTOR:73:HDMI-A-1] [ 2.236941] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.236979] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.237177] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.237195] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 2.237231] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 2.237265] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 2.237965] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 2.238001] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 2.238198] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.238231] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.238425] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.238436] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 2.238444] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] disconnected [ 2.238452] [drm:drm_setup_crtcs [drm_kms_helper]] connector 67 enabled? yes [ 2.238459] [drm:drm_setup_crtcs [drm_kms_helper]] connector 73 enabled? no [ 2.238497] [drm:intel_fb_initial_config [i915]] looking for cmdline mode on connector eDP-1 [ 2.238532] [drm:intel_fb_initial_config [i915]] looking for preferred mode on connector eDP-1 0 [ 2.238568] [drm:intel_fb_initial_config [i915]] connector eDP-1 on [CRTC:41:pipe A]: 1366x768 [ 2.238607] [drm:intel_fb_initial_config [i915]] connector HDMI-A-1 not enabled, skipping [ 2.238617] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1366x768 set on crtc 41 (0,0) [ 2.281995] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.311918] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.311972] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.312635] SCSI subsystem initialized [ 2.313025] cryptd: max_cpu_qlen set to 1000 [ 2.316321] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.316329] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 2.317743] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.318150] ehci-pci: EHCI PCI platform driver [ 2.318164] AVX2 version of gcm_enc/dec engaged. [ 2.318165] AES CTR mode by8 optimization enabled [ 2.318487] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810 [ 2.318493] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.319236] libata version 3.00 loaded. [ 2.319897] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 [ 2.319899] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.319901] usb usb1: Product: xHCI Host Controller [ 2.319903] usb usb1: Manufacturer: Linux 5.0.0-g6e610bdc61f8 xhci-hcd [ 2.319905] usb usb1: SerialNumber: 0000:00:14.0 [ 2.320047] hub 1-0:1.0: USB hub found [ 2.320656] ahci 0000:00:1f.2: version 3.0 [ 2.321111] hub 1-0:1.0: 9 ports detected [ 2.323886] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.323891] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 2.323895] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 2.323947] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00 [ 2.323949] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.323951] usb usb2: Product: xHCI Host Controller [ 2.323954] usb usb2: Manufacturer: Linux 5.0.0-g6e610bdc61f8 xhci-hcd [ 2.323956] usb usb2: SerialNumber: 0000:00:14.0 [ 2.324083] hub 2-0:1.0: USB hub found [ 2.324085] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.324094] hub 2-0:1.0: 4 ports detected [ 2.325591] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 2.325604] ehci-pci 0000:00:1d.0: debug port 2 [ 2.329495] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.329510] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb0c1c000 [ 2.330941] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode [ 2.330944] ahci 0000:00:1f.2: flags: 64bit ncq led clo only pio slum part deso sadm sds apst [ 2.331252] scsi host0: ahci [ 2.331402] scsi host1: ahci [ 2.331490] scsi host2: ahci [ 2.331539] ata1: SATA max UDMA/133 abar m2048@0xb0c1b000 port 0xb0c1b100 irq 45 [ 2.331540] ata2: DUMMY [ 2.331541] ata3: DUMMY [ 2.342320] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.342396] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 [ 2.342398] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.342400] usb usb3: Product: EHCI Host Controller [ 2.342402] usb usb3: Manufacturer: Linux 5.0.0-g6e610bdc61f8 ehci_hcd [ 2.342404] usb usb3: SerialNumber: 0000:00:1d.0 [ 2.342534] hub 3-0:1.0: USB hub found [ 2.342542] hub 3-0:1.0: 2 ports detected [ 2.348464] [drm:ilk_hpd_irq_handler [i915]] hotplug event received, stat 0x08000000, dig 0x00000011, pins 0x00000010, long 0x00000000 [ 2.348502] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - short [ 2.348548] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port A - short [ 2.349288] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 81 41 00 00 01 00 02 00 00 00 00 00 00 [ 2.353510] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 2.572421] tsc: Refined TSC clocksource calibration: 2593.994 MHz [ 2.572443] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256412811b4, max_idle_ns: 440795306987 ns [ 2.572514] clocksource: Switched to clocksource tsc [ 2.646728] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.648936] ata1.00: supports DRM functions and may not be fully accessible [ 2.650094] ata1.00: ATA-11: Samsung SSD 860 EVO 1TB, RVT01B6Q, max UDMA/133 [ 2.650101] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.653462] ata1.00: supports DRM functions and may not be fully accessible [ 2.657019] ata1.00: configured for UDMA/133 [ 2.657030] ahci 0000:00:1f.2: port does not support device sleep [ 2.657681] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5 [ 2.664031] ata1.00: Enabling discard_zeroes_data [ 2.664451] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.664471] sd 0:0:0:0: [sda] Write Protect is off [ 2.664476] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.664505] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.664782] ata1.00: Enabling discard_zeroes_data [ 2.667575] sda: sda1 sda2 sda3 [ 2.668117] ata1.00: Enabling discard_zeroes_data [ 2.669304] sd 0:0:0:0: [sda] supports TCG Opal [ 2.669307] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.672335] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 2.726371] device-mapper: uevent: version 1.0.3 [ 2.726573] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 2.736940] random: fast init done [ 2.748139] random: cryptsetup: uninitialized urandom read (4 bytes read) [ 2.752968] random: cryptsetup: uninitialized urandom read (4 bytes read) [ 2.819790] usb 3-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ 2.819794] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.820152] hub 3-1:1.0: USB hub found [ 2.820339] hub 3-1:1.0: 8 ports detected [ 3.099081] usb 3-1.3: new full-speed USB device number 3 using ehci-pci [ 3.201296] usb 3-1.3: New USB device found, idVendor=248a, idProduct=8367, bcdDevice= 1.00 [ 3.201301] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.201304] usb 3-1.3: Product: Wireless Receiver [ 3.201307] usb 3-1.3: Manufacturer: Telink [ 3.206864] hidraw: raw HID events driver (C) Jiri Kosina [ 3.214228] usbcore: registered new interface driver usbhid [ 3.214230] usbhid: USB HID core driver [ 3.215371] input: Telink Wireless Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:248A:8367.0001/input/input7 [ 3.215431] input: Telink Wireless Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:248A:8367.0001/input/input8 [ 3.269150] input: Telink Wireless Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:248A:8367.0001/input/input9 [ 3.269286] hid-generic 0003:248A:8367.0001: input,hidraw0: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-0000:00:1d.0-1.3/input0 [ 3.269567] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3:1.1/0003:248A:8367.0002/input/input10 [ 3.275755] usb 3-1.5: new full-speed USB device number 4 using ehci-pci [ 3.325987] hid-generic 0003:248A:8367.0002: input,hidraw1: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-0000:00:1d.0-1.3/input1 [ 3.375067] usb 3-1.5: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01 [ 3.375074] usb 3-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.449092] usb 3-1.7: new high-speed USB device number 5 using ehci-pci [ 3.547052] usb 3-1.7: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60 [ 3.547059] usb 3-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.547064] usb 3-1.7: Product: USB2.0-CRW [ 3.547068] usb 3-1.7: Manufacturer: Generic [ 3.547073] usb 3-1.7: SerialNumber: 20100201396000000 [ 3.553176] usbcore: registered new interface driver rtsx_usb [ 5.452497] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off [ 5.452570] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007 [ 14.202853] NET: Registered protocol family 38 [ 14.268441] random: cryptsetup: uninitialized urandom read (2 bytes read) [ 14.268862] device-mapper: crypt: xts(aes) using implementation "xts-aes-aesni" [ 14.343382] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 14.429373] random: crng init done [ 14.524503] systemd[1]: systemd 241.7-2-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 14.539187] systemd[1]: Detected architecture x86-64. [ 14.543913] systemd[1]: Set hostname to . [ 14.634569] systemd-system-update-generator[329]: Offline system update overridden by runlevel "emergency" on the kernel command line [ 14.765141] systemd[1]: /usr/lib/systemd/system/smb.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/smbd.pid → /run/smbd.pid; please update the unit file accordingly. [ 14.765420] systemd[1]: /usr/lib/systemd/system/winbind.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/winbindd.pid → /run/winbindd.pid; please update the unit file accordingly. [ 14.765726] systemd[1]: /usr/lib/systemd/system/nmb.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/nmbd.pid → /run/nmbd.pid; please update the unit file accordingly. [ 14.783123] systemd[1]: Started Emergency Shell. [ 14.783269] systemd[1]: Reached target Emergency Mode. [ 14.785260] systemd[331]: emergency.service: Executable /bin/plymouth missing, skipping: No such file or directory [ 14.789109] systemd[1]: Startup finished in 1.214s (firmware) + 8.290s (loader) + 14.485s (kernel) + 303ms (userspace) = 24.293s. [ 43.163484] MARK: starting GUI [ 43.739805] systemd[1]: Reloading. [ 43.776005] systemd-system-update-generator[349]: Offline system update overridden by runlevel "emergency" on the kernel command line [ 43.791442] systemd[1]: /usr/lib/systemd/system/smb.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/smbd.pid → /run/smbd.pid; please update the unit file accordingly. [ 43.791513] systemd[1]: /usr/lib/systemd/system/winbind.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/winbindd.pid → /run/winbindd.pid; please update the unit file accordingly. [ 43.791580] systemd[1]: /usr/lib/systemd/system/nmb.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/nmbd.pid → /run/nmbd.pid; please update the unit file accordingly. [ 43.805795] systemd[1]: emergency.service: Succeeded. [ 43.806121] systemd[1]: Stopped Emergency Shell. [ 43.807019] systemd[1]: Listening on Journal Socket. [ 43.807824] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 43.808583] systemd[1]: Mounting Huge Pages File System... [ 43.808704] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 43.830106] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 43.842329] audit: type=1130 audit(1552567035.688:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 43.842992] audit: type=1130 audit(1552567035.688:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-binfmt comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 43.844250] loop: module loaded [ 43.853304] usbcore: registered new interface driver usb-storage [ 43.856699] usbcore: registered new interface driver uas [ 43.868545] audit: type=1130 audit(1552567035.712:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 43.869297] usbcore: registered new interface driver ums-cypress [ 43.893417] audit: type=1130 audit(1552567035.735:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 43.900967] systemd-journald[356]: Received request to flush runtime journal from PID 1 [ 43.910744] audit: type=1130 audit(1552567035.755:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 43.928219] FS-Cache: Loaded [ 43.929794] Key type dns_resolver registered [ 43.960618] audit: type=1130 audit(1552567035.805:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 43.982354] FS-Cache: Netfs 'cifs' registered for caching [ 43.982576] Key type cifs.spnego registered [ 43.982581] Key type cifs.idmap registered [ 43.997191] 8021q: 802.1Q VLAN Support v1.8 [ 44.007622] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 44.012082] tun: Universal TUN/TAP device driver, 1.6 [ 44.034835] usbcore: registered new interface driver asix [ 44.036923] usbcore: registered new interface driver ax88179_178a [ 44.038383] usbcore: registered new interface driver cdc_ether [ 44.039736] usbcore: registered new interface driver rndis_host [ 44.052843] audit: type=1130 audit(1552567035.898:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 44.061735] usbcore: registered new interface driver pl2303 [ 44.061762] usbserial: USB Serial support registered for pl2303 [ 44.065547] usbcore: registered new interface driver cdc_acm [ 44.065548] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 44.075985] audit: type=1130 audit(1552567035.918:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed' [ 44.088020] audit: type=1130 audit(1552567035.932:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 44.093593] ACPI: AC Adapter [ACAD] (on-line) [ 44.109439] i2c_hid i2c-DLL063E:00: i2c-DLL063E:00 supply vdd not found, using dummy regulator [ 44.109457] i2c_hid i2c-DLL063E:00: Linked as a consumer to regulator.0 [ 44.109460] i2c_hid i2c-DLL063E:00: i2c-DLL063E:00 supply vddl not found, using dummy regulator [ 44.120195] input: DLL063E:00 06CB:2934 as /devices/pci0000:00/INT33C3:00/i2c-0/i2c-DLL063E:00/0018:06CB:2934.0003/input/input11 [ 44.120298] hid-generic 0018:06CB:2934.0003: input,hidraw2: I2C HID v1.00 Pointer [DLL063E:00 06CB:2934] on i2c-DLL063E:00 [ 44.135407] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 44.175867] [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=373/937 [ 44.175909] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 402 [ 44.177018] audit: type=1130 audit(1552567036.022:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:intel_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 44.179507] libphy: r8169: probed [ 44.179711] r8169 0000:01:00.0 eth0: RTL8106e, 34:17:eb:7e:da:76, XID 449, IRQ 47 [ 44.180639] input: PC Speaker as /devices/platform/pcspkr/input/input13 [ 44.182091] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel [ 44.182092] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 44.183704] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 44.214557] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 44.214559] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 44.214560] RAPL PMU: hw unit of domain package 2^-14 Joules [ 44.214561] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 44.214562] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 44.232525] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 44.257663] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 44.258367] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3) [ 44.303987] Intel(R) Wireless WiFi driver for Linux [ 44.303989] Copyright(c) 2003- 2015 Intel Corporation [ 44.308554] snd_hda_intel 0000:00:03.0: Linked as a consumer to 0000:00:02.0 [ 44.308606] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 44.308641] [drm:intel_power_well_enable [i915]] enabling display [ 44.313164] iwlwifi 0000:02:00.0: loaded firmware version 17.3216344376.0 op_mode iwlmvm [ 44.349242] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 44.349288] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 44.349331] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 44.349371] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 44.349411] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 44.349452] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 44.349492] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 44.349534] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 44.349574] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 44.359667] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 44.359735] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 [ 44.359819] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17 [ 44.359887] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18 [ 44.359952] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19 [ 44.402513] battery: ACPI: Battery Slot [BAT1] (battery present) [ 44.402645] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3234: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 44.402648] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 44.402650] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 44.402652] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 44.402653] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 44.402656] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x19 [ 44.402658] snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x1a [ 44.402662] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 44.407250] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 44.416043] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input21 [ 44.445443] device-mapper: crypt: cbc(aes) using implementation "cbc-aes-aesni" [ 44.446869] media: Linux media interface: v0.10 [ 44.447048] iTCO_vendor_support: vendor-support=0 [ 44.450626] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 44.450681] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 44.452567] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 44.482783] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164 [ 44.501553] iwlwifi 0000:02:00.0: base HW address: 34:de:1a:61:e4:1e [ 44.507100] intel-spi intel-spi: unrecognized JEDEC id bytes: 1c, 70, 17 [ 44.507102] intel-spi intel-spi: failed to locate the chip [ 44.507115] intel-spi: probe of intel-spi failed with error -2 [ 44.563405] videodev: Linux video capture interface: v2.00 [ 44.610053] Adding 2097148k swap on /dev/mapper/swap. Priority:-2 extents:1 across:2097148k SSFS [ 44.666508] [drm] amdgpu kernel modesetting enabled. [ 44.666533] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle [ 44.666796] ATPX version 1, functions 0x00000033 [ 44.667044] ATPX Hybrid Graphics [ 44.667304] CRAT table not found [ 44.667306] Virtual CRAT table created for CPU [ 44.667308] Parsing CRAT table with 1 nodes [ 44.667310] Creating topology SYSFS entries [ 44.667325] Topology: Add CPU node [ 44.667326] Finished initializing topology [ 44.667451] amdgpu 0000:03:00.0: enabling device (0000 -> 0003) [ 44.667832] [drm] initializing kernel modesetting (TOPAZ 0x1002:0x6900 0x1028:0x0640 0x00). [ 44.667943] [drm] register mmio base: 0xB0900000 [ 44.667945] [drm] register mmio size: 262144 [ 44.667958] [drm] add ip block number 0 [ 44.667959] [drm] add ip block number 1 [ 44.667960] [drm] add ip block number 2 [ 44.667961] [drm] add ip block number 3 [ 44.667962] [drm] add ip block number 4 [ 44.667963] [drm] add ip block number 5 [ 44.667965] amdgpu 0000:03:00.0: kfd not supported on this ASIC [ 44.667985] vga_switcheroo: enabled [ 44.694968] intel_rapl: Found RAPL domain package [ 44.694970] intel_rapl: Found RAPL domain core [ 44.694971] intel_rapl: Found RAPL domain uncore [ 44.694973] intel_rapl: Found RAPL domain dram [ 44.694975] intel_rapl: RAPL package 0 domain package locked by BIOS [ 44.695275] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 44.707182] ATOM BIOS: BR45293.001 [ 44.707206] [drm] GPU posting now... [ 44.712766] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 44.714265] amdgpu 0000:03:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used) [ 44.714268] amdgpu 0000:03:00.0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [ 44.714609] [drm] Detected VRAM RAM=2048M, BAR=256M [ 44.714610] [drm] RAM width 64bits DDR3 [ 44.714678] [TTM] Zone kernel: Available graphics memory: 4020452 kiB [ 44.714679] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 44.714680] [TTM] Initializing pool allocator [ 44.714685] [TTM] Initializing DMA pool allocator [ 44.714718] [drm] amdgpu: 2048M of VRAM memory ready [ 44.714720] [drm] amdgpu: 3072M of GTT memory ready. [ 44.714751] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 44.715362] [drm] PCIE GART of 256M enabled (table at 0x000000F400000000). [ 44.715446] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 44.715446] [drm] Driver supports precise vblank timestamp query. [ 44.717105] [drm] Chained IB support enabled! [ 44.733836] amdgpu: [powerplay] can't get the mac of 5 [ 44.735333] amdgpu: [powerplay] VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0! [ 44.740344] [drm:amdgpu_acpi_init [amdgpu]] Call to ATCS verify_interface failed: -5 [ 44.740440] [drm:amdgpu_atif_probe_handle [amdgpu]] Found ATIF handle \_SB_.PCI0.GFX0.ATIF [ 44.740602] [drm:amdgpu_acpi_init [amdgpu]] ATIF version 1 [ 44.740607] [drm] Initialized amdgpu 3.30.0 20150101 for 0000:03:00.0 on minor 1 [ 44.767155] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: s3203, fw id: 1541093 [ 44.842096] input: Synaptics s3203 as /devices/pci0000:00/INT33C3:00/i2c-0/i2c-DLL063E:00/0018:06CB:2934.0003/input/input22 [ 44.843958] hid-rmi 0018:06CB:2934.0003: input,hidraw2: I2C HID v1.00 Pointer [DLL063E:00 06CB:2934] on i2c-DLL063E:00 [ 44.850430] mousedev: PS/2 mouse device common for all mice [ 45.194126] Bluetooth: Core ver 2.22 [ 45.194151] NET: Registered protocol family 31 [ 45.194152] Bluetooth: HCI device and connection manager initialized [ 45.194156] Bluetooth: HCI socket layer initialized [ 45.194158] Bluetooth: L2CAP socket layer initialized [ 45.194161] Bluetooth: SCO socket layer initialized [ 45.204962] usbcore: registered new interface driver btusb [ 45.217836] Bluetooth: hci0: read Intel version: 370710010002030d00 [ 45.218906] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.2.3.d.bseq [ 45.265498] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 45.265500] Bluetooth: BNEP filters: protocol multicast [ 45.265504] Bluetooth: BNEP socket layer initialized [ 45.294464] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20 [ 45.294890] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23 [ 45.303140] leds platform::micmute: Setting an LED's brightness failed (-19) [ 45.426444] Generic PHY r8169-100:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE) [ 45.439846] Bluetooth: hci0: Intel firmware patch completed and activated [ 45.686555] r8169 0000:01:00.0 eth0: Link is Down [ 45.779828] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:eDP-1] [ 45.779876] [drm:intel_dp_detect [i915]] [CONNECTOR:67:eDP-1] [ 45.779919] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 45.779962] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 45.779994] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 45.780028] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on [ 45.780063] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f [ 45.780658] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 45.780693] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes [ 45.781422] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 45.781441] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 45.781455] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 45.781489] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:eDP-1] probed modes : [ 45.781506] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 45.781521] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 48 61040 1366 1374 1384 1558 768 771 772 816 0x40 0x9 [ 45.781537] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] [ 45.781568] [drm:intel_hdmi_detect [i915]] [CONNECTOR:73:HDMI-A-1] [ 45.781776] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 45.781804] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 45.782008] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 45.782023] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 45.782051] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 45.782080] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 45.782789] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 45.782821] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 45.783025] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 45.783053] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 45.783254] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 45.783264] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 45.783272] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] disconnected [ 45.787234] [drm:amdgpu_vm_init [amdgpu]] VM update mode is SDMA [ 46.296225] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:eDP-1] [ 46.296266] [drm:intel_dp_detect [i915]] [CONNECTOR:67:eDP-1] [ 46.296302] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 46.296333] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 46.296365] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 46.296963] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 46.296997] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes [ 46.297715] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 46.297736] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 46.297751] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 46.297788] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:eDP-1] probed modes : [ 46.297806] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 46.297822] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 48 61040 1366 1374 1384 1558 768 771 772 816 0x40 0x9 [ 46.297839] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] [ 46.297873] [drm:intel_hdmi_detect [i915]] [CONNECTOR:73:HDMI-A-1] [ 46.298078] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 46.298107] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 46.298309] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 46.298324] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 46.298352] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 46.298381] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 46.299088] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 46.299121] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 46.299316] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 46.299347] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 46.299544] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 46.299554] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 46.299564] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] disconnected [ 46.729600] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 46.729630] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 46.729659] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 46.729685] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 46.729710] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 46.729735] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 46.729760] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 46.729785] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 46.729809] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 47.001470] Bluetooth: RFCOMM TTY layer initialized [ 47.001480] Bluetooth: RFCOMM socket layer initialized [ 47.001485] Bluetooth: RFCOMM ver 1.11 [ 48.550604] wlan0: authenticate with d4:ca:6d:dd:8c:bf [ 48.553759] wlan0: send auth to d4:ca:6d:dd:8c:bf (try 1/3) [ 48.555084] wlan0: authenticated [ 48.558727] wlan0: associate with d4:ca:6d:dd:8c:bf (try 1/3) [ 48.561724] wlan0: RX AssocResp from d4:ca:6d:dd:8c:bf (capab=0x431 status=0 aid=4) [ 48.562411] wlan0: associated [ 48.765982] [drm:drm_mode_addfb2 [drm]] [FB:82] [ 48.766004] [drm:drm_mode_setcrtc [drm]] [CRTC:41:pipe A] [ 48.766021] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:67:eDP-1] [ 48.775753] [drm:drm_mode_setcrtc [drm]] [CRTC:53:pipe B] [ 48.775789] [drm:drm_mode_setcrtc [drm]] [CRTC:65:pipe C] [ 48.914554] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 49.012514] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.022798] [drm:drm_mode_addfb2 [drm]] [FB:82] [ 49.045698] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.061803] [drm:drm_mode_addfb2 [drm]] [FB:82] [ 49.073427] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.095236] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.105159] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.120844] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.137288] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.149042] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.156828] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.164413] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.171842] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.180003] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.188482] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.196765] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.204511] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.211776] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.220344] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.228478] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.239296] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.255334] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.263175] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.280282] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.291610] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.299426] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.307229] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.315514] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.323458] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.330933] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.338659] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.347247] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.355298] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.362430] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.370630] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.378576] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.386960] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.395430] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.399267] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off [ 49.399352] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007 [ 49.402993] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.410368] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.418131] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.426990] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.434620] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.442209] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.450107] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.458825] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.466681] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.473462] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.482260] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.490210] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.497806] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.505386] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.514247] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.521689] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.553505] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.579272] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.597741] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.608408] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.616410] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.624407] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.632387] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.640497] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.648563] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.656733] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.664091] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.672241] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.680072] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.688227] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.695653] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.703738] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.711931] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 49.719972] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 49.727633] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 52.570093] amdgpu: [powerplay] VI should always have 2 performance levels [ 52.609961] amdgpu 0000:03:00.0: GPU pci config reset [ 58.172420] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 58.281147] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 58.285989] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 58.294029] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 58.303999] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 58.335351] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 58.347155] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 58.362766] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 58.378424] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 58.394775] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 58.406898] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 58.415145] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 58.434270] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 58.446080] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 58.454373] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 58.461960] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 58.470177] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 58.478309] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 58.486189] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 58.493710] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 58.501988] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 58.509886] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 58.517508] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 58.525399] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 58.536593] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 58.554315] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 59.471136] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 59.668327] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 59.787013] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 59.866272] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 60.031456] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 60.144573] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 60.224854] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 60.318309] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 60.414136] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 60.560098] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 60.674681] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 60.700471] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 60.720073] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 60.730608] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 60.738477] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 60.746752] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 60.754217] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 60.762773] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 60.771005] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 60.791167] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 60.803808] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 60.823942] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 60.835225] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 60.855776] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 60.866815] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 60.887250] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 60.899356] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 60.918087] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 60.930948] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 60.952706] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 61.489788] [drm] PCIE GART of 256M enabled (table at 0x000000F400000000). [ 61.496175] amdgpu: [powerplay] can't get the mac of 5 [ 61.497636] amdgpu: [powerplay] VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0! [ 61.521497] [drm:amdgpu_vm_init [amdgpu]] VM update mode is SDMA [ 61.543137] [drm:amdgpu_vm_init [amdgpu]] VM update mode is SDMA [ 61.574307] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 61.574795] [drm:intel_framebuffer_init [i915]] No Y tiling for legacy addfb [ 61.574823] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer [ 61.574891] [drm:intel_framebuffer_init [i915]] unsupported pixel format XR24 little-endian (0x34325258) / modifier 0x100000000000002 [ 61.574918] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer [ 61.695448] [drm:drm_mode_addfb2 [drm]] [FB:79] [ 61.822868] [drm:drm_mode_setcrtc [drm]] [CRTC:41:pipe A] [ 61.822883] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:67:eDP-1] [ 62.332543] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:eDP-1] [ 62.332579] [drm:intel_dp_detect [i915]] [CONNECTOR:67:eDP-1] [ 62.332608] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 62.332633] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 62.332663] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 62.332700] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on [ 62.332729] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f [ 62.333322] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 62.333347] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes [ 62.334068] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 62.334084] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 62.334094] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 62.334121] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:67:eDP-1] probed modes : [ 62.334134] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 62.334145] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1366x768": 48 61040 1366 1374 1384 1558 768 771 772 816 0x40 0x9 [ 62.334435] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] [ 62.334460] [drm:intel_hdmi_detect [i915]] [CONNECTOR:73:HDMI-A-1] [ 62.334655] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 62.334685] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 62.334877] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 62.334890] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 62.334911] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 62.334930] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 62.335606] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 62.335638] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 62.335836] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 62.335861] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 62.336041] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 62.336049] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 62.336056] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:73:HDMI-A-1] disconnected [ 62.401529] fuse init (API version 7.28) [ 62.490752] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 62.490782] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 62.490810] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 62.490839] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 62.490867] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 62.490895] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 62.490922] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 62.490950] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 62.490977] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 64.112134] rfkill: input handler disabled [ 65.399033] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off [ 65.399075] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007 [ 65.618673] [drm:drm_mode_addfb2 [drm]] [FB:84] [ 65.632194] [drm:drm_mode_addfb2 [drm]] [FB:86] [ 65.764027] [drm:drm_mode_addfb2 [drm]] [FB:87] [ 67.799686] amdgpu: [powerplay] VI should always have 2 performance levels [ 67.850829] amdgpu 0000:03:00.0: GPU pci config reset [ 72.605218] [drm] PCIE GART of 256M enabled (table at 0x000000F400000000). [ 72.609777] amdgpu: [powerplay] can't get the mac of 5 [ 72.611220] amdgpu: [powerplay] VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0! [ 78.865711] amdgpu: [powerplay] VI should always have 2 performance levels [ 78.924431] amdgpu 0000:03:00.0: GPU pci config reset [ 82.942860] MARK: done