[ 0.000000] Linux version 5.0.0-28-lowlatency (buildd@lgw01-amd64-031) (gcc version 8.3.0 (Ubuntu 8.3.0-6ubuntu1)) #30-Ubuntu SMP PREEMPT Wed Sep 4 12:28:52 UTC 2019 (Ubuntu 5.0.0-28.30-lowlatency 5.0.21) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-28-lowlatency root=UUID=718970be-1c9c-4b4e-8940-1e26324e158b ro drm.debug=0xe quiet splash log_buf_len=4M console=tty1 console=ttyS0 panic=-1 vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000008ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x0000000000090fff] type 20 [ 0.000000] BIOS-e820: [mem 0x0000000000091000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000004c3fafff] usable [ 0.000000] BIOS-e820: [mem 0x000000004c3fb000-0x000000004dc6afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000004dc6b000-0x000000004dfa1fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000004dfa2000-0x000000004e3eefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000004e3ef000-0x000000004eb44fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000004eb45000-0x000000004ec0efff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000004ec0f000-0x000000004ec0ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000004ec10000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000086dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.70 by American Megatrends [ 0.000000] efi: ACPI 2.0=0x4df3e000 ACPI=0x4df3e000 SMBIOS=0x4e99b000 SMBIOS 3.0=0x4e99a000 MEMATTR=0x4825d018 ESRT=0x49d99418 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] SMBIOS 3.2.1 present. [ 0.000000] DMI: System manufacturer System Product Name/PRIME Z390-A, BIOS 1105 06/06/2019 [ 0.000000] tsc: Detected 3600.000 MHz processor [ 0.000006] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000007] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000010] last_pfn = 0x86e000 max_arch_pfn = 0x400000000 [ 0.000012] MTRR default type: write-back [ 0.000012] MTRR fixed ranges enabled: [ 0.000013] 00000-9FFFF write-back [ 0.000013] A0000-BFFFF uncachable [ 0.000014] C0000-FFFFF write-protect [ 0.000014] MTRR variable ranges enabled: [ 0.000015] 0 base 0080000000 mask 7F80000000 uncachable [ 0.000015] 1 base 0060000000 mask 7FE0000000 uncachable [ 0.000016] 2 base 0050000000 mask 7FF0000000 uncachable [ 0.000016] 3 base 004F800000 mask 7FFF800000 uncachable [ 0.000017] 4 base 2000000000 mask 6000000000 uncachable [ 0.000017] 5 base 1000000000 mask 7000000000 uncachable [ 0.000018] 6 base 4000000000 mask 4000000000 uncachable [ 0.000018] 7 disabled [ 0.000018] 8 disabled [ 0.000018] 9 disabled [ 0.000716] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000820] last_pfn = 0x4ec10 max_arch_pfn = 0x400000000 [ 0.005134] esrt: Reserving ESRT space from 0x0000000049d99418 to 0x0000000049d99450. [ 0.005141] check: Scanning 1 areas for low memory corruption [ 0.005143] Using GB pages for direct mapping [ 0.005145] BRK [0x6d0a01000, 0x6d0a01fff] PGTABLE [ 0.005145] BRK [0x6d0a02000, 0x6d0a02fff] PGTABLE [ 0.005146] BRK [0x6d0a03000, 0x6d0a03fff] PGTABLE [ 0.005170] BRK [0x6d0a04000, 0x6d0a04fff] PGTABLE [ 0.005172] BRK [0x6d0a05000, 0x6d0a05fff] PGTABLE [ 0.005256] BRK [0x6d0a06000, 0x6d0a06fff] PGTABLE [ 0.005284] BRK [0x6d0a07000, 0x6d0a07fff] PGTABLE [ 0.005316] BRK [0x6d0a08000, 0x6d0a08fff] PGTABLE [ 0.005499] printk: log_buf_len: 4194304 bytes [ 0.005499] printk: early log buf free: 256864(97%) [ 0.005500] RAMDISK: [mem 0x2e050000-0x31e34fff] [ 0.005508] ACPI: Early table checksum verification disabled [ 0.005510] ACPI: RSDP 0x000000004DF3E000 000024 (v02 ALASKA) [ 0.005512] ACPI: XSDT 0x000000004DF3E0B0 0000D4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.005515] ACPI: FACP 0x000000004DF80E70 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.005517] ACPI: DSDT 0x000000004DF3E218 042C56 (v02 ALASKA A M I 01072009 INTL 20160527) [ 0.005519] ACPI: FACS 0x000000004E3EE080 000040 [ 0.005520] ACPI: APIC 0x000000004DF80F88 0000BC (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.005521] ACPI: FPDT 0x000000004DF81048 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.005523] ACPI: FIDT 0x000000004DF81090 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.005524] ACPI: MCFG 0x000000004DF81130 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.005525] ACPI: WSMT 0x000000004DF8F950 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.005527] ACPI: SSDT 0x000000004DF811C8 001B1C (v02 CpuRef CpuSsdt 00003000 INTL 20160527) [ 0.005528] ACPI: SSDT 0x000000004DF82CE8 003099 (v02 SaSsdt SaSsdt 00003000 INTL 20160527) [ 0.005529] ACPI: HPET 0x000000004DF85D88 000038 (v01 ALASKA A M I 00000002 01000013) [ 0.005531] ACPI: SSDT 0x000000004DF85DC0 000FAE (v02 ALASKA Ther_Rvp 00001000 INTL 20160527) [ 0.005532] ACPI: SSDT 0x000000004DF86D70 002FD3 (v02 INTEL xh_cfsd4 00000000 INTL 20160527) [ 0.005533] ACPI: UEFI 0x000000004DF89D48 000042 (v01 ALASKA A M I 00000002 01000013) [ 0.005535] ACPI: LPIT 0x000000004DF89D90 000094 (v01 ALASKA A M I 00000002 01000013) [ 0.005536] ACPI: SSDT 0x000000004DF89E28 0027DE (v02 ALASKA PtidDevc 00001000 INTL 20160527) [ 0.005537] ACPI: SSDT 0x000000004DF8C608 0014E2 (v02 ALASKA TbtTypeC 00000000 INTL 20160527) [ 0.005538] ACPI: DBGP 0x000000004DF8DAF0 000034 (v01 ALASKA A M I 00000002 01000013) [ 0.005540] ACPI: DBG2 0x000000004DF8DB28 000054 (v00 ALASKA A M I 00000002 01000013) [ 0.005541] ACPI: SSDT 0x000000004DF8DB80 001B67 (v02 ALASKA UsbCTabl 00001000 INTL 20160527) [ 0.005542] ACPI: DMAR 0x000000004DF8F6E8 0000A8 (v01 INTEL EDK2 00000002 01000013) [ 0.005543] ACPI: SSDT 0x000000004DF8F790 000144 (v02 Intel ADebTabl 00001000 INTL 20160527) [ 0.005545] ACPI: BGRT 0x000000004DF8F8D8 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.005546] ACPI: WPBT 0x000000004DF8F910 00003C (v01 ALASKA A M I 00000001 ASUS 00000001) [ 0.005551] ACPI: Local APIC address 0xfee00000 [ 0.005789] No NUMA configuration found [ 0.005789] Faking a node at [mem 0x0000000000000000-0x000000086dffffff] [ 0.005794] NODE_DATA(0) allocated [mem 0x86dbd5000-0x86dbfffff] [ 0.005929] Zone ranges: [ 0.005929] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.005930] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.005930] Normal [mem 0x0000000100000000-0x000000086dffffff] [ 0.005931] Device empty [ 0.005931] Movable zone start for each node [ 0.005933] Early memory node ranges [ 0.005933] node 0: [mem 0x0000000000001000-0x000000000008ffff] [ 0.005934] node 0: [mem 0x0000000000091000-0x000000000009efff] [ 0.005934] node 0: [mem 0x0000000000100000-0x000000004c3fafff] [ 0.005934] node 0: [mem 0x000000004ec0f000-0x000000004ec0ffff] [ 0.005935] node 0: [mem 0x0000000100000000-0x000000086dffffff] [ 0.006062] Zeroed struct page in unavailable ranges: 15463 pages [ 0.006063] Initmem setup node 0 [mem 0x0000000000001000-0x000000086dffffff] [ 0.006064] On node 0 totalpages: 8102809 [ 0.006064] DMA zone: 64 pages used for memmap [ 0.006065] DMA zone: 23 pages reserved [ 0.006065] DMA zone: 3997 pages, LIFO batch:0 [ 0.006118] DMA32 zone: 4816 pages used for memmap [ 0.006118] DMA32 zone: 308220 pages, LIFO batch:63 [ 0.011781] Normal zone: 121728 pages used for memmap [ 0.011782] Normal zone: 7790592 pages, LIFO batch:63 [ 0.110067] Reserving Intel graphics memory at [mem 0x50000000-0x8fffffff] [ 0.110326] ACPI: PM-Timer IO Port: 0x1808 [ 0.110326] ACPI: Local APIC address 0xfee00000 [ 0.110331] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.110331] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.110331] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.110332] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.110332] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.110332] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.110332] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.110333] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.110373] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.110374] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.110375] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.110376] ACPI: IRQ0 used by override. [ 0.110376] ACPI: IRQ9 used by override. [ 0.110377] Using ACPI (MADT) for SMP configuration information [ 0.110378] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.110381] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.110391] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.110392] PM: Registered nosave memory: [mem 0x00090000-0x00090fff] [ 0.110393] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.110394] PM: Registered nosave memory: [mem 0x4c3fb000-0x4dc6afff] [ 0.110394] PM: Registered nosave memory: [mem 0x4dc6b000-0x4dfa1fff] [ 0.110394] PM: Registered nosave memory: [mem 0x4dfa2000-0x4e3eefff] [ 0.110394] PM: Registered nosave memory: [mem 0x4e3ef000-0x4eb44fff] [ 0.110395] PM: Registered nosave memory: [mem 0x4eb45000-0x4ec0efff] [ 0.110395] PM: Registered nosave memory: [mem 0x4ec10000-0x8fffffff] [ 0.110396] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff] [ 0.110396] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.110396] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff] [ 0.110397] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.110397] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.110397] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.110397] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.110398] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.110398] PM: Registered nosave memory: [mem 0xfed04000-0xfedfffff] [ 0.110398] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.110398] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.110399] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.110400] [mem 0x90000000-0xdfffffff] available for PCI devices [ 0.110400] Booting paravirtualized kernel on bare hardware [ 0.110402] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.110408] random: get_random_bytes called from start_kernel+0x97/0x51d with crng_init=0 [ 0.110411] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.110505] percpu: Embedded 47 pages/cpu s155648 r8192 d28672 u262144 [ 0.110509] pcpu-alloc: s155648 r8192 d28672 u262144 alloc=1*2097152 [ 0.110509] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.110523] Built 1 zonelists, mobility grouping on. Total pages: 7976178 [ 0.110524] Policy zone: Normal [ 0.110524] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-28-lowlatency root=UUID=718970be-1c9c-4b4e-8940-1e26324e158b ro drm.debug=0xe quiet splash log_buf_len=4M console=tty1 console=ttyS0 panic=-1 vt.handoff=1 [ 0.112517] Calgary: detecting Calgary via BIOS EBDA area [ 0.112518] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.153080] Memory: 31663332K/32411236K available (14339K kernel code, 2343K rwdata, 4452K rodata, 2516K init, 5256K bss, 747904K reserved, 0K cma-reserved) [ 0.153148] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.153151] ftrace: allocating 41653 entries in 163 pages [ 0.162225] rcu: Preemptible hierarchical RCU implementation. [ 0.162225] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.162226] Tasks RCU enabled. [ 0.162226] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.162227] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.163788] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 [ 0.164120] vt handoff: transparent VT on vt#1 [ 0.164123] Console: colour dummy device 80x25 [ 0.164125] printk: console [tty1] enabled [ 0.164153] printk: console [ttyS0] enabled [ 0.164159] ACPI: Core revision 20181213 [ 0.164472] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.164511] hpet clockevent registered [ 0.164560] APIC: Switch to symmetric I/O mode setup [ 0.164562] DMAR: Host address width 39 [ 0.164562] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.164565] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.164566] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.164568] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.164568] DMAR: RMRR base: 0x0000004cc14000 end: 0x0000004cc33fff [ 0.164569] DMAR: RMRR base: 0x0000004f800000 end: 0x0000008fffffff [ 0.164570] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.164570] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.164570] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.166040] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.166041] x2apic enabled [ 0.166065] Switched APIC routing to cluster x2apic. [ 0.170768] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.175526] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e452fbb2f, max_idle_ns: 440795236593 ns [ 0.175533] Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.00 BogoMIPS (lpj=3600000) [ 0.175534] pid_max: default: 32768 minimum: 301 [ 0.176771] efi: memattr: Entry attributes invalid: RO and XP bits both cleared [ 0.176773] efi: memattr: ! 0x000000090000-0x000000090fff [Runtime Code |RUN| | | | | | | | | | | ] [ 0.177558] LSM: Security Framework initializing [ 0.177563] Yama: becoming mindful. [ 0.177574] AppArmor: AppArmor initialized [ 0.180001] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.181050] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.181087] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.181120] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.181234] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.181234] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.181243] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.181258] process: using mwait in idle threads [ 0.181259] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8 [ 0.181260] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.181260] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.181261] Spectre V2 : Mitigation: Enhanced IBRS [ 0.181261] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.181264] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.181265] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.181401] Freeing SMP alternatives memory: 36K [ 0.182566] TSC deadline timer enabled [ 0.182572] smpboot: CPU0: Intel(R) Core(TM) i7-9700K CPU @ 3.60GHz (family: 0x6, model: 0x9e, stepping: 0xd) [ 0.188544] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.188577] ... version: 4 [ 0.188577] ... bit width: 48 [ 0.188578] ... generic registers: 8 [ 0.188578] ... value mask: 0000ffffffffffff [ 0.188578] ... max period: 00007fffffffffff [ 0.188578] ... fixed-purpose events: 3 [ 0.188579] ... event mask: 00000007000000ff [ 0.190534] rcu: Hierarchical SRCU implementation. [ 0.192884] random: crng done (trusting CPU's manufacturer) [ 0.194737] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.196543] smp: Bringing up secondary CPUs ... [ 0.206577] x86: Booting SMP configuration: [ 0.206577] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.267155] smp: Brought up 1 node, 8 CPUs [ 0.267155] smpboot: Max logical packages: 1 [ 0.267155] smpboot: Total of 8 processors activated (57600.00 BogoMIPS) [ 0.267907] devtmpfs: initialized [ 0.267907] x86/mm: Memory block size: 128MB [ 0.268939] PM: Registering ACPI NVS region [mem 0x4dfa2000-0x4e3eefff] (4509696 bytes) [ 0.268939] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.268939] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.268939] pinctrl core: initialized pinctrl subsystem [ 0.268939] RTC time: 21:30:29, date: 2019-09-16 [ 0.268939] NET: Registered protocol family 16 [ 0.268939] audit: initializing netlink subsys (disabled) [ 0.268939] audit: type=2000 audit(1568669429.104:1): state=initialized audit_enabled=0 res=1 [ 0.268939] EISA bus registered [ 0.268939] cpuidle: using governor ladder [ 0.268939] cpuidle: using governor menu [ 0.268939] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.268939] ACPI: bus type PCI registered [ 0.268939] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.268939] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.268939] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.268939] PCI: Using configuration type 1 for base access [ 0.270189] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.270189] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.270189] ACPI: Added _OSI(Module Device) [ 0.270189] ACPI: Added _OSI(Processor Device) [ 0.270189] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.270189] ACPI: Added _OSI(Processor Aggregator Device) [ 0.270189] ACPI: Added _OSI(Linux-Dell-Video) [ 0.270189] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.270189] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.318449] ACPI: 9 ACPI AML tables successfully acquired and loaded [ 0.324006] ACPI: Dynamic OEM Table Load: [ 0.324009] ACPI: SSDT 0xFFFF8A328A126F00 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160527) [ 0.324235] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 0.325313] ACPI: Dynamic OEM Table Load: [ 0.325315] ACPI: SSDT 0xFFFF8A328A14B400 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527) [ 0.325609] ACPI: Dynamic OEM Table Load: [ 0.325612] ACPI: SSDT 0xFFFF8A328A79B800 0006CB (v02 PmRef Cpu0Ist 00003000 INTL 20160527) [ 0.325974] ACPI: Dynamic OEM Table Load: [ 0.325976] ACPI: SSDT 0xFFFF8A328A349200 000133 (v02 PmRef Cpu0Hwp 00003000 INTL 20160527) [ 0.326197] ACPI: Dynamic OEM Table Load: [ 0.326199] ACPI: SSDT 0xFFFF8A328A79D000 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527) [ 0.326613] ACPI: Dynamic OEM Table Load: [ 0.326616] ACPI: SSDT 0xFFFF8A328A354800 0005FC (v02 PmRef ApIst 00003000 INTL 20160527) [ 0.326945] ACPI: Dynamic OEM Table Load: [ 0.326947] ACPI: SSDT 0xFFFF8A328A148000 000317 (v02 PmRef ApHwp 00003000 INTL 20160527) [ 0.327277] ACPI: Dynamic OEM Table Load: [ 0.327280] ACPI: SSDT 0xFFFF8A328E152000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160527) [ 0.327956] ACPI: Dynamic OEM Table Load: [ 0.327958] ACPI: SSDT 0xFFFF8A328A14D800 00030A (v02 PmRef ApCst 00003000 INTL 20160527) [ 0.330481] ACPI: EC: EC started [ 0.330481] ACPI: EC: interrupt blocked [ 0.330492] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.330493] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.330494] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 0.330494] ACPI: Interpreter enabled [ 0.330520] ACPI: (supports S0 S3 S4 S5) [ 0.330520] ACPI: Using IOAPIC for interrupt routing [ 0.330547] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.331392] ACPI: Enabled 7 GPEs in block 00 to 7F [ 0.341124] ACPI: Power Resource [USBC] (on) [ 0.343105] ACPI: Power Resource [V0PR] (on) [ 0.343384] ACPI: Power Resource [V1PR] (on) [ 0.343662] ACPI: Power Resource [V2PR] (on) [ 0.347707] ACPI: Power Resource [WRST] (on) [ 0.351321] ACPI: Power Resource [FN00] (off) [ 0.351379] ACPI: Power Resource [FN01] (off) [ 0.351434] ACPI: Power Resource [FN02] (off) [ 0.351489] ACPI: Power Resource [FN03] (off) [ 0.351547] ACPI: Power Resource [FN04] (off) [ 0.352076] ACPI: Power Resource [PIN] (off) [ 0.352411] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.352414] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.352546] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] [ 0.352668] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] [ 0.352668] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.353418] PCI host bridge to bus 0000:00 [ 0.353419] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.353420] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.353420] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.353421] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window] [ 0.353421] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] [ 0.353422] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window] [ 0.353422] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.353426] pci 0000:00:00.0: [8086:3e30] type 00 class 0x060000 [ 0.353681] pci 0000:00:02.0: [8086:3e98] type 00 class 0x030000 [ 0.353689] pci 0000:00:02.0: reg 0x10: [mem 0x6000000000-0x6000ffffff 64bit] [ 0.353692] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] [ 0.353695] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.353704] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.353880] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330 [ 0.353895] pci 0000:00:14.0: reg 0x10: [mem 0x6001100000-0x600110ffff 64bit] [ 0.353942] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.354223] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000 [ 0.354239] pci 0000:00:14.2: reg 0x10: [mem 0x6001114000-0x6001115fff 64bit] [ 0.354247] pci 0000:00:14.2: reg 0x18: [mem 0x6001118000-0x6001118fff 64bit] [ 0.354377] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000 [ 0.354398] pci 0000:00:16.0: reg 0x10: [mem 0x6001117000-0x6001117fff 64bit] [ 0.354462] pci 0000:00:16.0: PME# supported from D3hot [ 0.354632] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601 [ 0.354645] pci 0000:00:17.0: reg 0x10: [mem 0x90020000-0x90021fff] [ 0.354650] pci 0000:00:17.0: reg 0x14: [mem 0x90023000-0x900230ff] [ 0.354655] pci 0000:00:17.0: reg 0x18: [io 0x3090-0x3097] [ 0.354660] pci 0000:00:17.0: reg 0x1c: [io 0x3080-0x3083] [ 0.354665] pci 0000:00:17.0: reg 0x20: [io 0x3060-0x307f] [ 0.354670] pci 0000:00:17.0: reg 0x24: [mem 0x90022000-0x900227ff] [ 0.354699] pci 0000:00:17.0: PME# supported from D3hot [ 0.354828] pci 0000:00:1b.0: [8086:a340] type 01 class 0x060400 [ 0.354891] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.355059] pci 0000:00:1c.0: [8086:a338] type 01 class 0x060400 [ 0.355119] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.355286] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400 [ 0.355346] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.355516] pci 0000:00:1f.0: [8086:a305] type 00 class 0x060100 [ 0.355777] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300 [ 0.355814] pci 0000:00:1f.3: reg 0x10: [mem 0x6001110000-0x6001113fff 64bit] [ 0.355850] pci 0000:00:1f.3: reg 0x20: [mem 0x6001000000-0x60010fffff 64bit] [ 0.355924] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.356408] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500 [ 0.356432] pci 0000:00:1f.4: reg 0x10: [mem 0x6001116000-0x60011160ff 64bit] [ 0.356449] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.356571] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000 [ 0.356584] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] [ 0.356707] pci 0000:00:1f.6: [8086:15bc] type 00 class 0x020000 [ 0.356738] pci 0000:00:1f.6: reg 0x10: [mem 0x90000000-0x9001ffff] [ 0.356848] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.357007] acpiphp: Slot [1] registered [ 0.357010] pci 0000:00:1b.0: PCI bridge to [bus 01] [ 0.357085] acpiphp: Slot [1-1] registered [ 0.357094] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.357167] acpiphp: Slot [1-2] registered [ 0.357176] pci 0000:00:1d.0: PCI bridge to [bus 03] [ 0.358374] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.358431] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1 [ 0.358486] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.358545] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.358601] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.358656] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.358711] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.358765] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.359213] ACPI: EC: interrupt unblocked [ 0.359231] ACPI: EC: event unblocked [ 0.359245] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.359246] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.359283] SCSI subsystem initialized [ 0.359283] libata version 3.00 loaded. [ 0.359283] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.359283] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.359283] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.359283] vgaarb: loaded [ 0.359283] ACPI: bus type USB registered [ 0.359283] usbcore: registered new interface driver usbfs [ 0.359283] usbcore: registered new interface driver hub [ 0.359283] usbcore: registered new device driver usb [ 0.359283] pps_core: LinuxPPS API ver. 1 registered [ 0.359283] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.359283] PTP clock support registered [ 0.359283] EDAC MC: Ver: 3.0.0 [ 0.359283] Registered efivars operations [ 0.381735] PCI: Using ACPI for IRQ routing [ 0.425327] PCI: pci_cache_line_size set to 64 bytes [ 0.425391] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.425392] e820: reserve RAM buffer [mem 0x4c3fb000-0x4fffffff] [ 0.425392] e820: reserve RAM buffer [mem 0x4ec10000-0x4fffffff] [ 0.425393] e820: reserve RAM buffer [mem 0x86e000000-0x86fffffff] [ 0.425434] NetLabel: Initializing [ 0.425434] NetLabel: domain hash size = 128 [ 0.425434] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.425441] NetLabel: unlabeled traffic allowed by default [ 0.425822] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.425823] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.427538] clocksource: Switched to clocksource tsc-early [ 0.433090] VFS: Disk quotas dquot_6.6.0 [ 0.433097] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.433149] AppArmor: AppArmor Filesystem Enabled [ 0.433157] pnp: PnP ACPI init [ 0.433203] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved [ 0.433205] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.433316] system 00:01: [io 0x0290-0x029f] has been reserved [ 0.433318] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.433549] system 00:02: [io 0x0680-0x069f] has been reserved [ 0.433551] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.433624] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.433625] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.433740] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.433740] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.433741] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.433741] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved [ 0.433742] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.433743] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.433743] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.433744] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.433745] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.433885] system 00:05: [io 0x1800-0x18fe] could not be reserved [ 0.433886] system 00:05: [mem 0xfd000000-0xfd69ffff] has been reserved [ 0.433887] system 00:05: [mem 0xfd6c0000-0xfd6cffff] has been reserved [ 0.433887] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 0.433888] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.433888] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved [ 0.433889] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.433890] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.434082] system 00:06: [io 0x2000-0x20fe] has been reserved [ 0.434083] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.434787] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.435422] pnp: PnP ACPI: found 8 devices [ 0.440490] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.440502] pci 0000:00:1b.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.440503] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.440504] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 0.440518] pci 0000:00:1b.0: BAR 14: assigned [mem 0x90100000-0x902fffff] [ 0.440519] pci 0000:00:1b.0: BAR 15: assigned [mem 0x4010000000-0x40101fffff 64bit pref] [ 0.440520] pci 0000:00:1b.0: BAR 13: assigned [io 0x4000-0x4fff] [ 0.440521] pci 0000:00:1b.0: PCI bridge to [bus 01] [ 0.440524] pci 0000:00:1b.0: bridge window [io 0x4000-0x4fff] [ 0.440526] pci 0000:00:1b.0: bridge window [mem 0x90100000-0x902fffff] [ 0.440530] pci 0000:00:1b.0: bridge window [mem 0x4010000000-0x40101fffff 64bit pref] [ 0.440533] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.440541] pci 0000:00:1d.0: PCI bridge to [bus 03] [ 0.440550] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.440550] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.440551] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.440551] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window] [ 0.440552] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window] [ 0.440552] pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window] [ 0.440553] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.440553] pci_bus 0000:01: resource 1 [mem 0x90100000-0x902fffff] [ 0.440554] pci_bus 0000:01: resource 2 [mem 0x4010000000-0x40101fffff 64bit pref] [ 0.440652] NET: Registered protocol family 2 [ 0.440713] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes) [ 0.440761] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.440895] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.440953] TCP: Hash tables configured (established 262144 bind 65536) [ 0.440973] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.441009] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.441064] NET: Registered protocol family 1 [ 0.441066] NET: Registered protocol family 44 [ 0.441070] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.441232] PCI: CLS 64 bytes, default 64 [ 0.441248] Unpacking initramfs... [ 0.893510] Freeing initrd memory: 63380K [ 0.899588] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.899589] software IO TLB: mapped [mem 0x43962000-0x47962000] (64MB) [ 0.899695] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e452fbb2f, max_idle_ns: 440795236593 ns [ 0.899704] clocksource: Switched to clocksource tsc [ 0.899718] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.899773] check: Scanning for low memory corruption every 60 seconds [ 0.900814] Initialise system trusted keyrings [ 0.900821] Key type blacklist registered [ 0.900837] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.901524] zbud: loaded [ 0.901681] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.901759] fuse init (API version 7.28) [ 0.923486] Key type asymmetric registered [ 0.923487] Asymmetric key parser 'x509' registered [ 0.923491] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.923512] io scheduler mq-deadline registered [ 0.923726] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.923758] efifb: probing for efifb [ 0.923764] efifb: framebuffer at 0x4000000000, using 3072k, total 3072k [ 0.923764] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.923765] efifb: scrolling: redraw [ 0.923765] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.923815] Console: switching to colour frame buffer device 128x48 [ 0.923823] fb0: EFI VGA frame buffer device [ 0.923827] intel_idle: MWAIT substates: 0x11142120 [ 0.923828] intel_idle: v0.4.1 model 0x9E [ 0.924123] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.924235] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.924239] ACPI: Sleep Button [SLPB] [ 0.924259] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.924263] ACPI: Power Button [PWRB] [ 0.924280] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.930586] ACPI: Power Button [PWRF] [ 0.993780] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.993781] ACPI: Thermal Zone [TZ00] (28 C) [ 0.993915] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.995199] Linux agpgart interface v0.103 [ 0.996751] loop: module loaded [ 0.996875] libphy: Fixed MDIO Bus: probed [ 0.996876] tun: Universal TUN/TAP device driver, 1.6 [ 0.996917] PPP generic driver version 2.4.2 [ 0.996958] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.996959] ehci-pci: EHCI PCI platform driver [ 0.996964] ehci-platform: EHCI generic platform driver [ 0.996969] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.996970] ohci-pci: OHCI PCI platform driver [ 0.996973] ohci-platform: OHCI generic platform driver [ 0.996977] uhci_hcd: USB Universal Host Controller Interface driver [ 0.997091] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.997094] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.998158] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810 [ 0.998161] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.998353] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 [ 0.998354] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.998355] usb usb1: Product: xHCI Host Controller [ 0.998355] usb usb1: Manufacturer: Linux 5.0.0-28-lowlatency xhci-hcd [ 0.998356] usb usb1: SerialNumber: 0000:00:14.0 [ 0.998413] hub 1-0:1.0: USB hub found [ 0.998427] hub 1-0:1.0: 16 ports detected [ 1.000004] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.000006] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.000007] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.000027] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00 [ 1.000027] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.000028] usb usb2: Product: xHCI Host Controller [ 1.000029] usb usb2: Manufacturer: Linux 5.0.0-28-lowlatency xhci-hcd [ 1.000029] usb usb2: SerialNumber: 0000:00:14.0 [ 1.000102] hub 2-0:1.0: USB hub found [ 1.000113] hub 2-0:1.0: 10 ports detected [ 1.000585] usb: port power management may be unreliable [ 1.001454] i8042: PNP: No PS/2 controller found. [ 1.001509] mousedev: PS/2 mouse device common for all mice [ 1.001655] rtc_cmos rtc_cmos: RTC can wake from S4 [ 1.002280] rtc_cmos rtc_cmos: registered as rtc0 [ 1.002287] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.002291] i2c /dev entries driver [ 1.002333] device-mapper: uevent: version 1.0.3 [ 1.002380] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.002389] platform eisa.0: Probing EISA bus 0 [ 1.002390] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.002391] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.002392] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.002392] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.002393] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.002393] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.002394] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.002394] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.002395] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.002395] platform eisa.0: EISA: Detected 0 cards [ 1.002397] intel_pstate: Intel P-state driver initializing [ 1.002953] intel_pstate: HWP enabled [ 1.003158] ledtrig-cpu: registered to indicate activity on CPUs [ 1.003159] EFI Variables Facility v0.08 2004-May-17 [ 1.035907] intel_pmc_core: initialized [ 1.036047] NET: Registered protocol family 10 [ 1.039620] Segment Routing with IPv6 [ 1.039629] NET: Registered protocol family 17 [ 1.039681] Key type dns_resolver registered [ 1.040076] mce: Using 14 MCE banks [ 1.040084] RAS: Correctable Errors collector initialized. [ 1.040117] microcode: sig=0x906ed, pf=0x2, revision=0xb8 [ 1.040289] microcode: Microcode Update Driver: v2.2. [ 1.040294] sched_clock: Marking stable (1039869197, 418227)->(1063109193, -22821769) [ 1.040481] registered taskstats version 1 [ 1.040485] Loading compiled-in X.509 certificates [ 1.041444] Loaded X.509 cert 'Build time autogenerated kernel key: 94c9ccdd76c1482a7eb046e3d45b0b81e406179e' [ 1.041957] Couldn't get size: 0x800000000000000e [ 1.042283] MODSIGN: Couldn't get UEFI db list [ 1.042919] Couldn't get size: 0x800000000000000e [ 1.043241] MODSIGN: Couldn't get UEFI MokListRT [ 1.043543] Couldn't get size: 0x800000000000000e [ 1.043864] MODSIGN: Couldn't get UEFI dbx list [ 1.043876] zswap: loaded using pool lzo/zbud [ 1.047806] Key type big_key registered [ 1.047808] Key type trusted registered [ 1.049503] Key type encrypted registered [ 1.049505] AppArmor: AppArmor sha1 policy hashing enabled [ 1.050813] ima: No TPM chip found, activating TPM-bypass! [ 1.050841] ima: Allocated hash algorithm: sha1 [ 1.050844] No architecture policies found [ 1.050850] evm: Initialising EVM extended attributes: [ 1.050850] evm: security.selinux [ 1.050850] evm: security.SMACK64 [ 1.050851] evm: security.SMACK64EXEC [ 1.050851] evm: security.SMACK64TRANSMUTE [ 1.050851] evm: security.SMACK64MMAP [ 1.050851] evm: security.apparmor [ 1.050852] evm: security.ima [ 1.050852] evm: security.capability [ 1.050852] evm: HMAC attrs: 0x1 [ 1.052434] Magic number: 3:926:550 [ 1.052442] tty ttyS26: hash matches [ 1.052446] clockevents clockevent1: hash matches [ 1.052459] acpi PNP0C0F:01: hash matches [ 1.052756] rtc_cmos rtc_cmos: setting system clock to 2019-09-16T21:30:30 UTC (1568669430) [ 1.053601] Freeing unused decrypted memory: 2040K [ 1.053960] Freeing unused kernel image memory: 2516K [ 1.069607] Write protecting the kernel read-only data: 22528k [ 1.070307] Freeing unused kernel image memory: 2016K [ 1.070519] Freeing unused kernel image memory: 1692K [ 1.076666] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.076670] Run /init as init process [ 1.119590] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02) [ 1.119616] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02) [ 1.119673] acpi PNP0C14:05: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02) [ 1.128059] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.128060] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.128255] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.128830] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 1.128927] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 1.129026] ahci 0000:00:17.0: version 3.0 [ 1.139253] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.139254] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst [ 1.147102] VFIO - User Level meta-driver version: 0.3 [ 1.155213] scsi host0: ahci [ 1.155438] scsi host1: ahci [ 1.155707] scsi host2: ahci [ 1.155880] scsi host3: ahci [ 1.156558] scsi host4: ahci [ 1.156655] scsi host5: ahci [ 1.156685] ata1: SATA max UDMA/133 abar m2048@0x90022000 port 0x90022100 irq 124 [ 1.156686] ata2: SATA max UDMA/133 abar m2048@0x90022000 port 0x90022180 irq 124 [ 1.156687] ata3: SATA max UDMA/133 abar m2048@0x90022000 port 0x90022200 irq 124 [ 1.156688] ata4: SATA max UDMA/133 abar m2048@0x90022000 port 0x90022280 irq 124 [ 1.156689] ata5: SATA max UDMA/133 abar m2048@0x90022000 port 0x90022300 irq 124 [ 1.156690] ata6: SATA max UDMA/133 abar m2048@0x90022000 port 0x90022380 irq 124 [ 1.172020] [drm:intel_pch_type [i915]] Found Cannon Lake PCH (CNP) [ 1.172046] [drm:intel_wopcm_init_early [i915]] WOPCM size: 1024KiB [ 1.172071] [drm:intel_uc_init_early [i915]] enable_guc=0 (submission:no huc:no) [ 1.172094] [drm:intel_uc_init_early [i915]] guc_log_level=0 (enabled:no, verbose:no, verbosity:0) [ 1.172116] [drm:intel_power_domains_init [i915]] Allowed DC state mask 03 [ 1.172233] [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M [ 1.172254] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M [ 1.172274] [drm:i915_ggtt_probe_hw [i915]] DSM size = 1024M [ 1.172276] checking generic (4000000000 300000) vs hw (4000000000 10000000) [ 1.172276] fb0: switching to inteldrmfb from EFI VGA [ 1.172286] Console: switching to colour dummy device 80x25 [ 1.172350] [drm] Replacing VGA console driver [ 1.172380] [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8ff00047 [ 1.172402] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 1048576K, usable: 1047552K [ 1.172426] [drm:wa_init_finish [i915]] Initialized 4 GT workarounds [ 1.172481] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params [ 1.172507] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x4e392018 [ 1.172535] [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 [ 1.172585] [drm:intel_opregion_setup [i915]] Public ACPI methods supported [ 1.172606] [drm:intel_opregion_setup [i915]] SWSCI supported [ 1.173601] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 [ 1.173627] [drm:intel_opregion_setup [i915]] ASLE supported [ 1.173647] [drm:intel_opregion_setup [i915]] ASLE extension supported [ 1.173668] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 1.173693] [drm:skl_dram_get_channel_info [i915]] (size:width:rank) L(16GB:X8:dual) S(0GB:X8:single) [ 1.173717] [drm:skl_dram_get_channel_info [i915]] (size:width:rank) L(16GB:X8:dual) S(0GB:X8:single) [ 1.173741] [drm:skl_dram_get_channels_info [i915]] memory configuration is Symmetric memory [ 1.173764] [drm:i915_driver_load.cold.15 [i915]] DRAM bandwidth:64000000 KBps, total-channels: 2 [ 1.173786] [drm:i915_driver_load.cold.15 [i915]] DRAM rank: dual rank 16GB-dimm:no [ 1.173787] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.173787] [drm] Driver supports precise vblank timestamp query. [ 1.173810] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz [ 1.173834] [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 221 [ 1.173856] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 [ 1.173878] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 [ 1.173900] [drm:intel_bios_init [i915]] Expected child device config size for VBT version 221 not known; assuming 39 [ 1.174602] [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) [ 1.174646] [drm:intel_bios_init [i915]] Panel type: 2 (VBT) [ 1.174667] [drm:intel_bios_init [i915]] DRRS supported mode is static [ 1.174688] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables: [ 1.174698] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 1.174719] [drm:intel_bios_init [i915]] VBT initial LVDS value 300 [ 1.174740] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 [ 1.174761] [drm:intel_bios_init [i915]] DRRS State Enabled:0 [ 1.174781] [drm:intel_bios_init [i915]] Skipping SDVO device mapping [ 1.174802] [drm:intel_bios_init [i915]] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 1.174822] [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0 [ 1.174842] [drm:intel_bios_init [i915]] VBT DP max link rate for port A: 810000 [ 1.174862] [drm:intel_bios_init [i915]] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.174882] [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 8 [ 1.174901] [drm:intel_bios_init [i915]] VBT DP max link rate for port B: 810000 [ 1.174921] [drm:intel_bios_init [i915]] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.174941] [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 8 [ 1.174961] [drm:intel_bios_init [i915]] VBT DP max link rate for port C: 810000 [ 1.175005] [drm:intel_dsm_detect [i915]] no _DSM method for intel device [ 1.175086] [drm:intel_update_rawclk [i915]] rawclk rate: 24000 kHz [ 1.175107] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00 [ 1.175128] [drm:intel_power_well_enable [i915]] enabling power well 1 [ 1.175148] [drm:intel_power_well_enable [i915]] enabling MISC IO power well [ 1.175171] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 675000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 3 [ 1.175194] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz [ 1.175215] [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz [ 1.175245] [drm:intel_power_well_enable [i915]] enabling always-on [ 1.175264] [drm:intel_power_well_enable [i915]] enabling DC off [ 1.175283] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00 [ 1.175303] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 1.175305] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.175324] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 1.175342] [drm:intel_power_well_enable [i915]] enabling DDI B IO power well [ 1.175360] [drm:intel_power_well_enable [i915]] enabling DDI C IO power well [ 1.175378] [drm:intel_power_well_enable [i915]] enabling DDI D IO power well [ 1.175403] [drm:intel_csr_ucode_init [i915]] Loading i915/kbl_dmc_ver1_04.bin [ 1.175753] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 1.176909] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 [ 1.176934] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) [ 1.176954] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) [ 1.176972] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) [ 1.176989] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) [ 1.177006] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) [ 1.177023] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) [ 1.177040] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) [ 1.177056] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) [ 1.177081] [drm:intel_modeset_init [i915]] 3 display pipes available. [ 1.177134] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 675000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 3 [ 1.177460] [drm:intel_bios_port_aux_ch [i915]] using AUX A for port A (VBT) [ 1.177484] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port A [ 1.177650] [drm:intel_pps_dump_state [i915]] cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 0 [ 1.177673] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 1.177694] [drm:intel_dp_init_panel_power_sequencer [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 [ 1.177715] [drm:intel_dp_init_panel_power_sequencer [i915]] backlight on delay 1, off delay 200 [ 1.177936] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 [ 1.177985] [drm:intel_edp_panel_vdd_sanitize [i915]] VDD left on by BIOS, adjusting state tracking [ 1.186491] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.194968] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.203444] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.211917] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.220391] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.228855] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.237329] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.245801] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.254272] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.262745] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.271216] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.279681] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.288154] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.296624] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.305074] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.313585] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.318531] usb 1-4: new low-speed USB device number 2 using xhci_hcd [ 1.322035] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.330506] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.339025] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.347548] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.354165] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 1.356086] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.364614] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.373129] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.381594] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.390066] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.398531] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.407004] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.415479] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.417746] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 04:d4:c4:57:a0:fe [ 1.417750] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 1.417806] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF [ 1.418227] e1000e 0000:00:1f.6 eno1: renamed from eth0 [ 1.423955] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.432427] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.433538] usb 1-4: device descriptor read/64, error -71 [ 1.440890] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.449362] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7d4003ff [ 1.449367] [drm:drm_dp_dpcd_access [drm_kms_helper]] Too many retries, giving up. First error: -110 [ 1.449367] [drm] failed to retrieve link info, disabling eDP [ 1.449412] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off [ 1.449593] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 [ 1.449640] [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (VBT) [ 1.449657] [drm:intel_dp_init_connector [i915]] Adding DP connector on port B [ 1.449677] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B [ 1.449694] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x1 for port B (VBT) [ 1.449715] [drm:intel_bios_port_aux_ch [i915]] using AUX C for port C (platform default) [ 1.449732] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C [ 1.449749] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x2 for port C (VBT) [ 1.449773] [drm:intel_modeset_readout_hw_state [i915]] [CRTC:47:pipe A] hw state readout: enabled [ 1.449791] [drm:intel_modeset_readout_hw_state [i915]] [CRTC:65:pipe B] hw state readout: disabled [ 1.449808] [drm:intel_modeset_readout_hw_state [i915]] [CRTC:83:pipe C] hw state readout: disabled [ 1.449825] [drm:intel_modeset_readout_hw_state [i915]] [PLANE:30:plane 1A] hw state readout: enabled, pipe A [ 1.449842] [drm:intel_modeset_readout_hw_state [i915]] [PLANE:37:plane 2A] hw state readout: disabled, pipe A [ 1.449859] [drm:intel_modeset_readout_hw_state [i915]] [PLANE:44:cursor A] hw state readout: disabled, pipe A [ 1.449875] [drm:intel_modeset_readout_hw_state [i915]] [PLANE:48:plane 1B] hw state readout: disabled, pipe B [ 1.449891] [drm:intel_modeset_readout_hw_state [i915]] [PLANE:55:plane 2B] hw state readout: disabled, pipe B [ 1.449907] [drm:intel_modeset_readout_hw_state [i915]] [PLANE:62:cursor B] hw state readout: disabled, pipe B [ 1.449923] [drm:intel_modeset_readout_hw_state [i915]] [PLANE:66:plane 1C] hw state readout: disabled, pipe C [ 1.449939] [drm:intel_modeset_readout_hw_state [i915]] [PLANE:73:plane 2C] hw state readout: disabled, pipe C [ 1.449955] [drm:intel_modeset_readout_hw_state [i915]] [PLANE:80:cursor C] hw state readout: disabled, pipe C [ 1.449971] [drm:intel_modeset_readout_hw_state [i915]] DPLL 0 hw state readout: crtc_mask 0x00000000, on 1 [ 1.449988] [drm:intel_modeset_readout_hw_state [i915]] DPLL 1 hw state readout: crtc_mask 0x00000001, on 1 [ 1.450003] [drm:intel_modeset_readout_hw_state [i915]] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 1.450019] [drm:intel_modeset_readout_hw_state [i915]] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0 [ 1.450035] [drm:intel_modeset_readout_hw_state [i915]] [ENCODER:84:DDI B] hw state readout: disabled, pipe A [ 1.450050] [drm:intel_modeset_readout_hw_state [i915]] [ENCODER:86:DP-MST A] hw state readout: disabled, pipe A [ 1.450066] [drm:intel_modeset_readout_hw_state [i915]] [ENCODER:87:DP-MST B] hw state readout: disabled, pipe B [ 1.450081] [drm:intel_modeset_readout_hw_state [i915]] [ENCODER:88:DP-MST C] hw state readout: disabled, pipe C [ 1.450098] [drm:intel_modeset_readout_hw_state [i915]] [ENCODER:98:DDI C] hw state readout: enabled, pipe A [ 1.450114] [drm:intel_modeset_readout_hw_state [i915]] [CONNECTOR:85:DP-1] hw state readout: disabled [ 1.450130] [drm:intel_modeset_readout_hw_state [i915]] [CONNECTOR:93:HDMI-A-1] hw state readout: disabled [ 1.450146] [drm:intel_modeset_readout_hw_state [i915]] [CONNECTOR:99:HDMI-A-2] hw state readout: enabled [ 1.450166] [drm:intel_dump_pipe_config [i915]] [CRTC:47:pipe A][setup_hw_state] [ 1.450182] [drm:intel_dump_pipe_config [i915]] output_types: HDMI (0x40) [ 1.450198] [drm:intel_dump_pipe_config [i915]] output format: RGB [ 1.450214] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 [ 1.450230] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 1 [ 1.450246] [drm:intel_dump_pipe_config [i915]] requested mode: [ 1.450253] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 148500 1024 2008 2052 2200 768 1084 1089 1125 0x40 0x5 [ 1.450269] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 1.450275] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.450291] [drm:intel_dump_pipe_config [i915]] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x40 flags: 0x5 [ 1.450307] [drm:intel_dump_pipe_config [i915]] port clock: 148500, pipe src size: 1024x768, pixel rate 148500 [ 1.450322] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0 [ 1.450338] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x07800438, enabled [ 1.450353] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 1.450370] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x21, cfgcr1: 0x80400173, cfgcr2: 0x3a5 [ 1.450385] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 1.450401] [drm:intel_dump_pipe_config [i915]] [PLANE:30:plane 1A] disabled, scaler_id = -1 [ 1.450416] [drm:intel_dump_pipe_config [i915]] [PLANE:37:plane 2A] disabled, scaler_id = -1 [ 1.450432] [drm:intel_dump_pipe_config [i915]] [PLANE:44:cursor A] disabled, scaler_id = -1 [ 1.450447] [drm:intel_dump_pipe_config [i915]] [CRTC:65:pipe B][setup_hw_state] [ 1.450463] [drm:intel_dump_pipe_config [i915]] output_types: (0x0) [ 1.450478] [drm:intel_dump_pipe_config [i915]] output format: Invalid [ 1.450532] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0 [ 1.450571] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 1.450586] [drm:intel_dump_pipe_config [i915]] requested mode: [ 1.450592] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.450607] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 1.450612] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.450628] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.450644] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 1.450659] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1.450674] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.450689] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 1.450706] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 [ 1.450721] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 1.450736] [drm:intel_dump_pipe_config [i915]] [PLANE:48:plane 1B] disabled, scaler_id = -1 [ 1.450752] [drm:intel_dump_pipe_config [i915]] [PLANE:55:plane 2B] disabled, scaler_id = -1 [ 1.450767] [drm:intel_dump_pipe_config [i915]] [PLANE:62:cursor B] disabled, scaler_id = -1 [ 1.450782] [drm:intel_dump_pipe_config [i915]] [CRTC:83:pipe C][setup_hw_state] [ 1.450797] [drm:intel_dump_pipe_config [i915]] output_types: (0x0) [ 1.450813] [drm:intel_dump_pipe_config [i915]] output format: Invalid [ 1.450827] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0 [ 1.450843] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 1.450857] [drm:intel_dump_pipe_config [i915]] requested mode: [ 1.450863] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.450878] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 1.450884] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.450900] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.450915] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 1.450930] [drm:intel_dump_pipe_config [i915]] num_scalers: 1, scaler_users: 0x0, scaler_id: -1 [ 1.450945] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.450960] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 1.450976] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 [ 1.450991] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 1.451007] [drm:intel_dump_pipe_config [i915]] [PLANE:66:plane 1C] disabled, scaler_id = -1 [ 1.451022] [drm:intel_dump_pipe_config [i915]] [PLANE:73:plane 2C] disabled, scaler_id = -1 [ 1.451037] [drm:intel_dump_pipe_config [i915]] [PLANE:80:cursor C] disabled, scaler_id = -1 [ 1.451054] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 enabled but not in use, disabling [ 1.451084] [drm:skylake_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=1024x768@32, offset=0, pitch 4096, size 0x300000 [ 1.451101] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, gtt_offset=0x0000000000000000, size=0x0000000000300000 [ 1.451122] [drm:intel_alloc_initial_plane_obj.isra.147 [i915]] initial plane fb obj 000000004e9d4d0e [ 1.451144] [drm:intel_atomic_setup_scalers [i915]] Attached scaler id 0.0 to CRTC:47 [ 1.451162] [drm:skl_compute_wm [i915]] [PLANE:30:plane 1A] ddb (0 - 0) -> (0 - 860) [ 1.451177] [drm:skl_compute_wm [i915]] [PLANE:44:cursor A] ddb (0 - 0) -> (860 - 892) [ 1.451200] [drm:intel_fbc_enable [i915]] reserved 6291456 bytes of contiguous stolen space for FBC, threshold: 1 [ 1.451217] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 1.460314] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [301000, 100000000] [ 1.460333] [drm:wa_init_finish [i915]] Initialized 14 context workarounds [ 1.460356] [drm:i915_gem_contexts_init [i915]] logical context support initialized [ 1.460474] [drm:wa_init_finish [i915]] Initialized 5 rcs0 workarounds [ 1.460497] [drm:wa_init_finish [i915]] Initialized 3 whitelist workarounds [ 1.460660] [drm:wa_list_apply.part.4 [i915]] Applied 4 GT workarounds [ 1.460747] [drm:wa_list_apply.part.4 [i915]] Applied 5 rcs0 workarounds [ 1.460807] [drm:intel_engine_apply_whitelist [i915]] Applied 3 whitelist workarounds [ 1.461270] [drm:intel_fbdev_init [i915]] found possible fb from plane A [ 1.461288] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping [ 1.461305] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping [ 1.461321] [drm:intel_fbdev_init [i915]] checking plane A for BIOS fb [ 1.461337] [drm:intel_fbdev_init [i915]] fb not wide enough for plane A (7680 vs 4096) [ 1.461352] [drm:intel_fbdev_init [i915]] BIOS fb not suitable for all pipes, not using [ 1.461998] [drm:intel_dp_connector_register [i915]] registering DPDDC-B bus for card0-DP-1 [ 1.462135] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0 [ 1.462202] [drm:intel_opregion_resume [i915]] 3 outputs detected [ 1.464018] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.464208] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 1.464311] [drm:intel_power_well_disable [i915]] disabling DDI D IO power well [ 1.464331] [drm:intel_power_well_disable [i915]] disabling DDI B IO power well [ 1.464336] [drm:drm_setup_crtcs [drm_kms_helper]] [ 1.464340] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:85:DP-1] [ 1.464359] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 1.464386] [drm:intel_dp_detect [i915]] [CONNECTOR:85:DP-1] [ 1.464387] i915 device info: pciid=0x3e98 rev=0x02 platform=COFFEELAKE gen=9 [ 1.464388] i915 device info: is_mobile: no [ 1.464388] i915 device info: is_lp: no [ 1.464389] i915 device info: is_alpha_support: no [ 1.464389] i915 device info: has_64bit_reloc: yes [ 1.464389] i915 device info: has_reset_engine: yes [ 1.464390] i915 device info: has_fpga_dbg: yes [ 1.464390] i915 device info: has_guc: yes [ 1.464390] i915 device info: has_guc_ct: no [ 1.464391] i915 device info: has_l3_dpf: no [ 1.464391] i915 device info: has_llc: yes [ 1.464392] i915 device info: has_logical_ring_contexts: yes [ 1.464392] i915 device info: has_logical_ring_elsq: no [ 1.464392] i915 device info: has_logical_ring_preemption: yes [ 1.464393] i915 device info: has_pooled_eu: no [ 1.464393] i915 device info: has_rc6: yes [ 1.464394] i915 device info: has_rc6p: no [ 1.464394] i915 device info: has_runtime_pm: yes [ 1.464394] i915 device info: has_snoop: no [ 1.464395] i915 device info: has_coherent_ggtt: yes [ 1.464395] i915 device info: unfenced_needs_alignment: no [ 1.464395] i915 device info: hws_needs_physical: no [ 1.464396] i915 device info: cursor_needs_physical: no [ 1.464396] i915 device info: has_csr: yes [ 1.464396] i915 device info: has_ddi: yes [ 1.464397] i915 device info: has_dp_mst: yes [ 1.464397] i915 device info: has_fbc: yes [ 1.464398] i915 device info: has_gmch_display: no [ 1.464398] i915 device info: has_hotplug: yes [ 1.464398] i915 device info: has_ipc: yes [ 1.464399] i915 device info: has_overlay: no [ 1.464399] i915 device info: has_psr: yes [ 1.464399] i915 device info: overlay_needs_physical: no [ 1.464400] i915 device info: supports_tv: no [ 1.464400] i915 device info: slice total: 1, mask=0001 [ 1.464401] i915 device info: subslice total: 3 [ 1.464401] i915 device info: slice0: 3 subslices, mask=0007 [ 1.464402] i915 device info: slice1: 0 subslices, mask=0000 [ 1.464402] i915 device info: slice2: 0 subslices, mask=0000 [ 1.464403] i915 device info: EU total: 24 [ 1.464403] i915 device info: EU per subslice: 8 [ 1.464403] i915 device info: has slice power gating: no [ 1.464404] i915 device info: has subslice power gating: no [ 1.464404] i915 device info: has EU power gating: yes [ 1.464405] i915 device info: CS timestamp frequency: 12000 kHz [ 1.464421] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:85:DP-1] status updated from unknown to disconnected [ 1.464426] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:85:DP-1] disconnected [ 1.464430] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:93:HDMI-A-1] [ 1.464454] [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-1] [ 1.464785] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.464808] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.465091] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.465131] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 1.465153] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 1.465174] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 1.465920] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.466016] ata6: SATA link down (SStatus 4 SControl 300) [ 1.466328] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.466575] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.466805] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.466986] ata5: SATA link down (SStatus 4 SControl 300) [ 1.467678] ata2.00: ATA-11: WDC WDS100T2B0B-00YS70, 401000WD, max UDMA/133 [ 1.467679] ata2.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.467689] ata3.00: ATA-9: ST2000DM006-2DM164, CC26, max UDMA/133 [ 1.467690] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.468765] ata3.00: configured for UDMA/133 [ 1.469911] ata1.00: ATAPI: HL-DT-ST DVD-RW GH41N, PQ05, max UDMA/100 [ 1.470388] ata2.00: configured for UDMA/133 [ 1.473675] ata1.00: configured for UDMA/100 [ 1.473886] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 1.473907] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 1.474046] ata4.00: ATA-9: WDC WD4005FZBX-00K5WB0, 01.01A01, max UDMA/133 [ 1.474047] ata4.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.474164] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.474184] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.474470] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.474507] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 1.474510] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:93:HDMI-A-1] status updated from unknown to disconnected [ 1.474514] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:93:HDMI-A-1] disconnected [ 1.474518] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:HDMI-A-2] [ 1.474539] [drm:intel_hdmi_detect [i915]] [CONNECTOR:99:HDMI-A-2] [ 1.482327] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RW GH41N PQ05 PQ: 0 ANSI: 5 [ 1.483817] ata4.00: configured for UDMA/133 [ 1.501229] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.501251] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.501530] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.501554] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 1.501562] [drm:drm_detect_monitor_audio [drm]] Monitor has basic audio support [ 1.501566] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:HDMI-A-2] status updated from unknown to connected [ 1.501573] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 1.501580] [drm:drm_add_display_info [drm]] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 1.501588] [drm:drm_add_edid_modes.part.34 [drm]] ELD monitor LG FULL HD [ 1.501595] [drm:drm_add_edid_modes.part.34 [drm]] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 [ 1.501602] [drm:drm_add_edid_modes.part.34 [drm]] ELD size 36, SAD count 1 [ 1.501609] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 1.501615] [drm:drm_add_display_info [drm]] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 1.501775] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:HDMI-A-2] probed modes : [ 1.501782] [drm:drm_mode_debug_printmodeline [drm]] Modeline 105:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1.501789] [drm:drm_mode_debug_printmodeline [drm]] Modeline 107:"1920x1080" 75 174500 1920 1968 2000 2080 1080 1083 1088 1119 0x40 0x5 [ 1.501796] [drm:drm_mode_debug_printmodeline [drm]] Modeline 125:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.501802] [drm:drm_mode_debug_printmodeline [drm]] Modeline 133:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.501809] [drm:drm_mode_debug_printmodeline [drm]] Modeline 130:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 1.501815] [drm:drm_mode_debug_printmodeline [drm]] Modeline 113:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 1.501822] [drm:drm_mode_debug_printmodeline [drm]] Modeline 116:"1400x1050" 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x40 0x9 [ 1.501828] [drm:drm_mode_debug_printmodeline [drm]] Modeline 114:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 [ 1.501834] [drm:drm_mode_debug_printmodeline [drm]] Modeline 121:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.501841] [drm:drm_mode_debug_printmodeline [drm]] Modeline 111:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.501847] [drm:drm_mode_debug_printmodeline [drm]] Modeline 112:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 1.501854] [drm:drm_mode_debug_printmodeline [drm]] Modeline 115:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 [ 1.501860] [drm:drm_mode_debug_printmodeline [drm]] Modeline 110:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1.501867] [drm:drm_mode_debug_printmodeline [drm]] Modeline 108:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.501873] [drm:drm_mode_debug_printmodeline [drm]] Modeline 126:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.501879] [drm:drm_mode_debug_printmodeline [drm]] Modeline 135:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.501886] [drm:drm_mode_debug_printmodeline [drm]] Modeline 132:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 1.501892] [drm:drm_mode_debug_printmodeline [drm]] Modeline 122:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1.501898] [drm:drm_mode_debug_printmodeline [drm]] Modeline 123:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.501905] [drm:drm_mode_debug_printmodeline [drm]] Modeline 124:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1.501911] [drm:drm_mode_debug_printmodeline [drm]] Modeline 117:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.501917] [drm:drm_mode_debug_printmodeline [drm]] Modeline 129:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 1.501924] [drm:drm_mode_debug_printmodeline [drm]] Modeline 136:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 1.501930] [drm:drm_mode_debug_printmodeline [drm]] Modeline 140:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 1.501936] [drm:drm_mode_debug_printmodeline [drm]] Modeline 109:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.501942] [drm:drm_mode_debug_printmodeline [drm]] Modeline 127:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.501949] [drm:drm_mode_debug_printmodeline [drm]] Modeline 118:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1.501955] [drm:drm_mode_debug_printmodeline [drm]] Modeline 137:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 1.501961] [drm:drm_mode_debug_printmodeline [drm]] Modeline 119:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.501968] [drm:drm_mode_debug_printmodeline [drm]] Modeline 128:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.501974] [drm:drm_mode_debug_printmodeline [drm]] Modeline 120:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.501978] [drm:drm_setup_crtcs [drm_kms_helper]] connector 85 enabled? no [ 1.501981] [drm:drm_setup_crtcs [drm_kms_helper]] connector 93 enabled? no [ 1.501984] [drm:drm_setup_crtcs [drm_kms_helper]] connector 99 enabled? yes [ 1.502009] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 1.502013] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 99 [ 1.502016] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 99 0 [ 1.502019] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1920x1080 [ 1.502021] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 8192x8192 config [ 1.502025] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1920x1080 set on crtc 47 (0,0) [ 1.502048] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one [ 1.502386] [drm:intelfb_create [i915]] allocated 1920x1080 fb: 0x00340000 [ 1.502434] fbcon: inteldrmfb (fb0) is primary device [ 1.502457] Console: switching to colour frame buffer device 240x67 [ 1.502473] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.531335] sr 0:0:0:0: [sr0] scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray [ 1.531336] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.531488] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.531518] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.531761] scsi 1:0:0:0: Direct-Access ATA WDC WDS100T2B0B 00WD PQ: 0 ANSI: 5 [ 1.531928] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.532083] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.532090] sd 1:0:0:0: [sda] Write Protect is off [ 1.532091] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.532101] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.532144] scsi 2:0:0:0: Direct-Access ATA ST2000DM006-2DM1 CC26 PQ: 0 ANSI: 5 [ 1.532462] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.532489] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 1.532490] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 1.532497] sd 2:0:0:0: [sdb] Write Protect is off [ 1.532498] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.532508] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.532687] scsi 3:0:0:0: Direct-Access ATA WDC WD4005FZBX-0 1A01 PQ: 0 ANSI: 5 [ 1.532779] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.532847] [drm:drm_fb_helper_hotplug_event.part.39 [drm_kms_helper]] [ 1.532851] [drm:drm_setup_crtcs [drm_kms_helper]] [ 1.532855] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:85:DP-1] [ 1.532881] [drm:intel_dp_detect [i915]] [CONNECTOR:85:DP-1] [ 1.532882] sd 3:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 1.532883] sd 3:0:0:0: [sdc] 4096-byte physical blocks [ 1.532889] sd 3:0:0:0: [sdc] Write Protect is off [ 1.532890] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.532901] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.532907] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:85:DP-1] disconnected [ 1.532911] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:93:HDMI-A-1] [ 1.532936] [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-1] [ 1.533213] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.533235] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.533557] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.533610] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 1.533631] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 1.533652] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 1.535534] sda: sda1 sda2 sda3 sda4 sda5 [ 1.535939] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.542091] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 1.542112] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 1.542470] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.542490] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.542742] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.542779] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 1.542782] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:93:HDMI-A-1] disconnected [ 1.542786] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:HDMI-A-2] [ 1.542807] [drm:intel_hdmi_detect [i915]] [CONNECTOR:99:HDMI-A-2] [ 1.569312] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.569335] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.569606] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.569643] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 1.569651] [drm:drm_detect_monitor_audio [drm]] Monitor has basic audio support [ 1.569659] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 1.569666] [drm:drm_add_display_info [drm]] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 1.569674] [drm:drm_add_edid_modes.part.34 [drm]] ELD monitor LG FULL HD [ 1.569681] [drm:drm_add_edid_modes.part.34 [drm]] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 [ 1.569688] [drm:drm_add_edid_modes.part.34 [drm]] ELD size 36, SAD count 1 [ 1.569694] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 1.569701] [drm:drm_add_display_info [drm]] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 1.569862] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:HDMI-A-2] probed modes : [ 1.569869] [drm:drm_mode_debug_printmodeline [drm]] Modeline 105:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1.569876] [drm:drm_mode_debug_printmodeline [drm]] Modeline 107:"1920x1080" 75 174500 1920 1968 2000 2080 1080 1083 1088 1119 0x40 0x5 [ 1.569883] [drm:drm_mode_debug_printmodeline [drm]] Modeline 125:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.569889] [drm:drm_mode_debug_printmodeline [drm]] Modeline 133:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.569896] [drm:drm_mode_debug_printmodeline [drm]] Modeline 130:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 1.569902] [drm:drm_mode_debug_printmodeline [drm]] Modeline 113:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 1.569909] [drm:drm_mode_debug_printmodeline [drm]] Modeline 116:"1400x1050" 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x40 0x9 [ 1.569915] [drm:drm_mode_debug_printmodeline [drm]] Modeline 114:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 [ 1.569922] [drm:drm_mode_debug_printmodeline [drm]] Modeline 121:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.569928] [drm:drm_mode_debug_printmodeline [drm]] Modeline 111:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.569935] [drm:drm_mode_debug_printmodeline [drm]] Modeline 112:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 1.569941] [drm:drm_mode_debug_printmodeline [drm]] Modeline 115:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 [ 1.569947] [drm:drm_mode_debug_printmodeline [drm]] Modeline 110:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1.569954] [drm:drm_mode_debug_printmodeline [drm]] Modeline 108:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.569960] [drm:drm_mode_debug_printmodeline [drm]] Modeline 126:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.569967] [drm:drm_mode_debug_printmodeline [drm]] Modeline 135:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.569973] [drm:drm_mode_debug_printmodeline [drm]] Modeline 132:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 1.569979] [drm:drm_mode_debug_printmodeline [drm]] Modeline 122:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1.569986] [drm:drm_mode_debug_printmodeline [drm]] Modeline 123:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.569992] [drm:drm_mode_debug_printmodeline [drm]] Modeline 124:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1.569998] [drm:drm_mode_debug_printmodeline [drm]] Modeline 117:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.570005] [drm:drm_mode_debug_printmodeline [drm]] Modeline 129:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 1.570011] [drm:drm_mode_debug_printmodeline [drm]] Modeline 136:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 1.570017] [drm:drm_mode_debug_printmodeline [drm]] Modeline 140:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 1.570023] [drm:drm_mode_debug_printmodeline [drm]] Modeline 109:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.570030] [drm:drm_mode_debug_printmodeline [drm]] Modeline 127:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.570036] [drm:drm_mode_debug_printmodeline [drm]] Modeline 118:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1.570042] [drm:drm_mode_debug_printmodeline [drm]] Modeline 137:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 1.570049] [drm:drm_mode_debug_printmodeline [drm]] Modeline 119:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.570055] [drm:drm_mode_debug_printmodeline [drm]] Modeline 128:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.570061] [drm:drm_mode_debug_printmodeline [drm]] Modeline 120:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.570065] [drm:drm_setup_crtcs [drm_kms_helper]] connector 85 enabled? no [ 1.570068] [drm:drm_setup_crtcs [drm_kms_helper]] connector 93 enabled? no [ 1.570071] [drm:drm_setup_crtcs [drm_kms_helper]] connector 99 enabled? yes [ 1.570096] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 1.570100] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 99 [ 1.570103] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 99 0 [ 1.570106] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1920x1080 [ 1.570109] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1920x1080 config [ 1.570112] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1920x1080 set on crtc 47 (0,0) [ 1.570144] [drm:intel_atomic_check [i915]] [CONNECTOR:99:HDMI-A-2] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 1.570169] [drm:intel_hdmi_compute_config [i915]] picking bpc to 8 for HDMI output [ 1.570191] [drm:intel_hdmi_compute_config [i915]] forcing pipe bpp to 24 for HDMI [ 1.570214] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 24, dithering: 0 [ 1.570237] [drm:intel_dump_pipe_config [i915]] [CRTC:47:pipe A][modeset] [ 1.570260] [drm:intel_dump_pipe_config [i915]] output_types: HDMI (0x40) [ 1.570281] [drm:intel_dump_pipe_config [i915]] output format: RGB [ 1.570303] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 [ 1.570324] [drm:intel_dump_pipe_config [i915]] audio: 1, infoframes: 1 [ 1.570344] [drm:intel_dump_pipe_config [i915]] requested mode: [ 1.570352] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1.570373] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 1.570380] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1.570402] [drm:intel_dump_pipe_config [i915]] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 1.570422] [drm:intel_dump_pipe_config [i915]] port clock: 148500, pipe src size: 1920x1080, pixel rate 148500 [ 1.570443] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0 [ 1.570464] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.570485] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 1.570506] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x21, cfgcr1: 0x80400173, cfgcr2: 0x3a5 [ 1.570527] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 1.570553] [drm:intel_dump_pipe_config [i915]] [PLANE:30:plane 1A] FB:103, fb = 1024x768 format = XR24 little-endian (0x34325258) [ 1.570574] [drm:intel_dump_pipe_config [i915]] scaler:-1 src 0x0+1024+768 dst 0x0+1024+768 [ 1.570594] [drm:intel_dump_pipe_config [i915]] [PLANE:37:plane 2A] disabled, scaler_id = -1 [ 1.570614] [drm:intel_dump_pipe_config [i915]] [PLANE:44:cursor A] disabled, scaler_id = -1 [ 1.570636] [drm:intel_modeset_checks [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 1.570657] [drm:intel_modeset_checks [i915]] New voltage level calculated to be logical 0, actual 0 [ 1.570682] [drm:intel_find_shared_dpll [i915]] [CRTC:47:pipe A] allocated DPLL 1 [ 1.570704] [drm:intel_reference_shared_dpll [i915]] using DPLL 1 for pipe A [ 1.570725] [drm:skl_update_scaler [i915]] scaler_user index 0.31: Staged freeing scaler id 0 scaler_users = 0x0 [ 1.570762] [drm:intel_disable_pipe [i915]] disabling pipe A [ 1.577598] [drm:intel_power_well_disable [i915]] disabling DDI C IO power well [ 1.577624] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 1.577649] [drm:intel_disable_shared_dpll [i915]] disable DPLL 1 (active 1, on? 1) for crtc 47 [ 1.577673] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 1 [ 1.577698] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 [ 1.577728] [drm:intel_atomic_commit_tail [i915]] [ENCODER:84:DDI B] [ 1.577750] [drm:intel_atomic_commit_tail [i915]] [ENCODER:86:DP-MST A] [ 1.577772] [drm:intel_atomic_commit_tail [i915]] [ENCODER:87:DP-MST B] [ 1.577793] [drm:intel_atomic_commit_tail [i915]] [ENCODER:88:DP-MST C] [ 1.577814] [drm:intel_atomic_commit_tail [i915]] [ENCODER:98:DDI C] [ 1.577836] [drm:verify_single_dpll_state.isra.106 [i915]] DPLL 0 [ 1.577857] [drm:verify_single_dpll_state.isra.106 [i915]] DPLL 1 [ 1.577879] [drm:verify_single_dpll_state.isra.106 [i915]] DPLL 2 [ 1.577900] [drm:verify_single_dpll_state.isra.106 [i915]] DPLL 3 [ 1.577923] [drm:intel_enable_shared_dpll [i915]] enable DPLL 1 (active 1, on? 0) for crtc 47 [ 1.577945] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 1 [ 1.578034] [drm:intel_power_well_enable [i915]] enabling DDI C IO power well [ 1.578034] sdc: sdc1 sdc2 [ 1.578264] [drm:intel_enable_pipe [i915]] enabling pipe A [ 1.578292] [drm:intel_audio_codec_enable [i915]] ELD on [CONNECTOR:99:HDMI-A-2], [ENCODER:98:DDI C] [ 1.578314] [drm:hsw_audio_codec_enable [i915]] Enable audio codec on pipe A, 36 bytes ELD [ 1.578338] [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 148500 (0x00090000) [ 1.578360] [drm:hsw_audio_config_update [i915]] using automatic N [ 1.578384] [drm:intel_fbc_enable [i915]] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1 [ 1.578406] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 1.578460] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.595044] [drm:verify_connector_state.isra.105 [i915]] [CONNECTOR:99:HDMI-A-2] [ 1.595072] [drm:intel_atomic_commit_tail [i915]] [CRTC:47:pipe A] [ 1.595104] [drm:verify_single_dpll_state.isra.106 [i915]] DPLL 1 [ 1.595129] [drm:intel_enable_sagv [i915]] Enabling the SAGV [ 1.595148] [drm:drm_fb_helper_hotplug_event.part.39 [drm_kms_helper]] [ 1.595151] [drm:drm_setup_crtcs [drm_kms_helper]] [ 1.595154] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:85:DP-1] [ 1.595179] [drm:intel_dp_detect [i915]] [CONNECTOR:85:DP-1] [ 1.595211] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:85:DP-1] disconnected [ 1.595215] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:93:HDMI-A-1] [ 1.595238] [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-1] [ 1.595600] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.595621] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.595919] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.595959] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 1.595980] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 1.596001] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 1.602330] sdb: sdb1 [ 1.602726] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.604894] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 1.604915] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 1.605263] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.605279] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.605548] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.605589] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 1.605593] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:93:HDMI-A-1] disconnected [ 1.605597] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:HDMI-A-2] [ 1.605614] [drm:intel_hdmi_detect [i915]] [CONNECTOR:99:HDMI-A-2] [ 1.632100] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.632116] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.632376] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.632411] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 1.632420] [drm:drm_detect_monitor_audio [drm]] Monitor has basic audio support [ 1.632429] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 1.632436] [drm:drm_add_display_info [drm]] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 1.632444] [drm:drm_add_edid_modes.part.34 [drm]] ELD monitor LG FULL HD [ 1.632452] [drm:drm_add_edid_modes.part.34 [drm]] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 [ 1.632458] [drm:drm_add_edid_modes.part.34 [drm]] ELD size 36, SAD count 1 [ 1.632465] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 1.632471] [drm:drm_add_display_info [drm]] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 1.632679] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:HDMI-A-2] probed modes : [ 1.632686] [drm:drm_mode_debug_printmodeline [drm]] Modeline 105:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1.632693] [drm:drm_mode_debug_printmodeline [drm]] Modeline 107:"1920x1080" 75 174500 1920 1968 2000 2080 1080 1083 1088 1119 0x40 0x5 [ 1.632719] [drm:drm_mode_debug_printmodeline [drm]] Modeline 125:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.632726] [drm:drm_mode_debug_printmodeline [drm]] Modeline 133:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.632750] [drm:drm_mode_debug_printmodeline [drm]] Modeline 130:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 1.632757] [drm:drm_mode_debug_printmodeline [drm]] Modeline 113:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 1.632763] [drm:drm_mode_debug_printmodeline [drm]] Modeline 116:"1400x1050" 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x40 0x9 [ 1.632770] [drm:drm_mode_debug_printmodeline [drm]] Modeline 114:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 [ 1.632776] [drm:drm_mode_debug_printmodeline [drm]] Modeline 121:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.632783] [drm:drm_mode_debug_printmodeline [drm]] Modeline 111:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.632789] [drm:drm_mode_debug_printmodeline [drm]] Modeline 112:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 1.632796] [drm:drm_mode_debug_printmodeline [drm]] Modeline 115:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 [ 1.632802] [drm:drm_mode_debug_printmodeline [drm]] Modeline 110:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1.632809] [drm:drm_mode_debug_printmodeline [drm]] Modeline 108:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.632815] [drm:drm_mode_debug_printmodeline [drm]] Modeline 126:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.632821] [drm:drm_mode_debug_printmodeline [drm]] Modeline 135:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.632828] [drm:drm_mode_debug_printmodeline [drm]] Modeline 132:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 1.632834] [drm:drm_mode_debug_printmodeline [drm]] Modeline 122:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1.632840] [drm:drm_mode_debug_printmodeline [drm]] Modeline 123:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.632847] [drm:drm_mode_debug_printmodeline [drm]] Modeline 124:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1.632853] [drm:drm_mode_debug_printmodeline [drm]] Modeline 117:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.632883] [drm:drm_mode_debug_printmodeline [drm]] Modeline 129:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 1.632889] [drm:drm_mode_debug_printmodeline [drm]] Modeline 136:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 1.632896] [drm:drm_mode_debug_printmodeline [drm]] Modeline 140:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 1.632919] [drm:drm_mode_debug_printmodeline [drm]] Modeline 109:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.632925] [drm:drm_mode_debug_printmodeline [drm]] Modeline 127:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.632932] [drm:drm_mode_debug_printmodeline [drm]] Modeline 118:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1.632938] [drm:drm_mode_debug_printmodeline [drm]] Modeline 137:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 1.632944] [drm:drm_mode_debug_printmodeline [drm]] Modeline 119:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.632951] [drm:drm_mode_debug_printmodeline [drm]] Modeline 128:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.632957] [drm:drm_mode_debug_printmodeline [drm]] Modeline 120:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.632961] [drm:drm_setup_crtcs [drm_kms_helper]] connector 85 enabled? no [ 1.632964] [drm:drm_setup_crtcs [drm_kms_helper]] connector 93 enabled? no [ 1.632967] [drm:drm_setup_crtcs [drm_kms_helper]] connector 99 enabled? yes [ 1.632984] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 1.632988] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 99 [ 1.632991] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 99 0 [ 1.632994] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1920x1080 [ 1.632997] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1920x1080 config [ 1.633000] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1920x1080 set on crtc 47 (0,0) [ 1.657628] usb 1-4: device descriptor read/64, error -71 [ 1.879590] usb 1-4: new low-speed USB device number 3 using xhci_hcd [ 1.994639] usb 1-4: device descriptor read/64, error -71 [ 2.197582] raid6: avx2x4 gen() 36847 MB/s [ 2.209576] raid6: avx2x4 xor() 22271 MB/s [ 2.215654] usb 1-4: device descriptor read/64, error -71 [ 2.221579] raid6: avx2x2 gen() 33262 MB/s [ 2.233598] raid6: avx2x2 xor() 20229 MB/s [ 2.245562] raid6: avx2x1 gen() 27103 MB/s [ 2.257564] raid6: avx2x1 xor() 18757 MB/s [ 2.269557] raid6: sse2x4 gen() 19934 MB/s [ 2.281566] raid6: sse2x4 xor() 12162 MB/s [ 2.293566] raid6: sse2x2 gen() 17337 MB/s [ 2.305559] raid6: sse2x2 xor() 11670 MB/s [ 2.317557] raid6: sse2x1 gen() 13509 MB/s [ 2.324596] usb usb1-port4: attempt power cycle [ 2.329571] raid6: sse2x1 xor() 10018 MB/s [ 2.329572] raid6: using algorithm avx2x4 gen() 36847 MB/s [ 2.329572] raid6: .... xor() 22271 MB/s, rmw enabled [ 2.329573] raid6: using avx2x2 recovery algorithm [ 2.331772] xor: automatically using best checksumming function avx [ 2.341564] Btrfs loaded, crc32c=crc32c-intel [ 2.510736] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 2.639557] systemd[1]: Inserted module 'autofs4' [ 2.713549] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.725657] systemd[1]: Detected architecture x86-64. [ 2.729431] systemd[1]: Set hostname to . [ 2.729698] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 2.820982] systemd[1]: /lib/systemd/system/sssd.service:11: PIDFile= references path below legacy directory /var/run/, updating /var/run/sssd.pid → /run/sssd.pid; please update the unit file accordingly. [ 2.825855] systemd[1]: /lib/systemd/system/memcached.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/memcached/memcached.pid → /run/memcached/memcached.pid; please update the unit file accordingly. [ 2.826694] systemd[1]: /lib/systemd/system/systemd-machined.service:16: Unknown lvalue 'ProtectHostname' in section 'Service' [ 2.860430] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.864468] systemd[1]: Listening on RPCbind Server Activation Socket. [ 2.864566] systemd[1]: Listening on Journal Socket. [ 2.878925] EXT4-fs (sda5): re-mounted. Opts: discard,errors=remount-ro [ 2.884211] lp: driver loaded but no devices found [ 2.886679] RPC: Registered named UNIX socket transport module. [ 2.886680] RPC: Registered udp transport module. [ 2.886680] RPC: Registered tcp transport module. [ 2.886681] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.886692] ppdev: user-space parallel port driver [ 2.892226] Loading iSCSI transport class v2.0-870. [ 2.896643] iscsi: registered transport (tcp) [ 2.908608] iscsi: registered transport (iser) [ 2.953538] usb 1-4: new low-speed USB device number 4 using xhci_hcd [ 2.955022] usb 1-4: Device not responding to setup address. [ 3.031361] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 3.051459] asus_wmi: ASUS WMI generic driver loaded [ 3.052397] asus_wmi: Initialization: 0x0 [ 3.052423] asus_wmi: BIOS WMI version: 0.9 [ 3.053164] asus_wmi: SFUN value: 0x0 [ 3.053494] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input4 [ 3.053635] asus_wmi: Number of fans: 1 [ 3.071395] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 3.071396] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 3.071396] RAPL PMU: hw unit of domain package 2^-14 Joules [ 3.071397] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 3.071397] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 3.071397] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 3.083989] cryptd: max_cpu_qlen set to 1000 [ 3.091922] systemd-journald[446]: Received request to flush runtime journal from PID 1 [ 3.098166] AVX2 version of gcm_enc/dec engaged. [ 3.098167] AES CTR mode by8 optimization enabled [ 3.153997] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 3.154111] snd_hda_intel 0000:00:1f.3: Linked as a consumer to 0000:00:02.0 [ 3.154137] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 3.158020] usb 1-4: Device not responding to setup address. [ 3.179235] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 3.179237] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.179238] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 3.179238] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 3.179239] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 3.179239] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 3.179240] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 3.179241] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 3.179242] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 3.186448] intel_rapl: Found RAPL domain package [ 3.186449] intel_rapl: Found RAPL domain core [ 3.186450] intel_rapl: Found RAPL domain uncore [ 3.186450] intel_rapl: Found RAPL domain dram [ 3.200613] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 3.200630] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 3.200646] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 3.200664] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 3.200680] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 3.200713] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 3.200729] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 3.200757] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 3.201822] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5 [ 3.201863] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 [ 3.201906] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 [ 3.201971] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 [ 3.202035] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 [ 3.202086] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 3.202135] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 3.202169] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 3.202207] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 3.202233] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 3.202269] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 3.202295] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 3.239552] Adding 67108860k swap on /dev/sdc2. Priority:-2 extents:1 across:67108860k FS [ 3.337885] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 3.364595] usb 1-4: device not accepting address 4, error -71 [ 3.370270] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 3.410765] audit: type=1400 audit(1568669432.857:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=897 comm="apparmor_parser" [ 3.410767] audit: type=1400 audit(1568669432.857:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=897 comm="apparmor_parser" [ 3.410890] audit: type=1400 audit(1568669432.857:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=890 comm="apparmor_parser" [ 3.410891] audit: type=1400 audit(1568669432.857:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=890 comm="apparmor_parser" [ 3.411111] audit: type=1400 audit(1568669432.857:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=894 comm="apparmor_parser" [ 3.414785] audit: type=1400 audit(1568669432.860:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=900 comm="apparmor_parser" [ 3.414786] audit: type=1400 audit(1568669432.860:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=900 comm="apparmor_parser" [ 3.414787] audit: type=1400 audit(1568669432.860:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=900 comm="apparmor_parser" [ 3.478567] usb 1-4: new low-speed USB device number 5 using xhci_hcd [ 3.480111] usb 1-4: Device not responding to setup address. [ 3.686067] usb 1-4: Device not responding to setup address. [ 3.892568] usb 1-4: device not accepting address 5, error -71 [ 3.893165] usb usb1-port4: unable to enumerate USB device [ 4.007539] usb 1-6: new high-speed USB device number 6 using xhci_hcd [ 4.038368] bpfilter: Loaded bpfilter_umh pid 1124 [ 4.138090] usb 1-6: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=60.52 [ 4.138092] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.138092] usb 1-6: Product: USB2.0 Hub [ 4.139254] hub 1-6:1.0: USB hub found [ 4.139537] hub 1-6:1.0: 4 ports detected [ 4.257540] usb 1-8: new high-speed USB device number 7 using xhci_hcd [ 4.396888] usb 1-8: New USB device found, idVendor=0bda, idProduct=2838, bcdDevice= 1.00 [ 4.396890] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.396891] usb 1-8: Product: RTL2838UHIDIR [ 4.396892] usb 1-8: Manufacturer: Realtek [ 4.396892] usb 1-8: SerialNumber: 00000001 [ 4.517542] usb 1-10: new high-speed USB device number 8 using xhci_hcd [ 4.570124] [drm:drm_mode_addfb2 [drm]] [FB:106] [ 4.570419] [drm:intel_framebuffer_init [i915]] No Y tiling for legacy addfb [ 4.570429] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer [ 4.570442] [drm:drm_mode_addfb2 [drm]] [FB:106] [ 4.646672] usb 1-10: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=32.98 [ 4.646674] usb 1-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.646675] usb 1-10: Product: USB2.0 Hub [ 4.646897] [drm:drm_mode_addfb2 [drm]] [FB:106] [ 4.647314] hub 1-10:1.0: USB hub found [ 4.647583] hub 1-10:1.0: 4 ports detected [ 4.651485] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.744524] usb 1-8: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state [ 4.797739] usb 1-8: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 4.797742] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) [ 4.802797] i2c i2c-6: Added multiplexed i2c bus 7 [ 4.802798] rtl2832 6-0010: Realtek RTL2832 successfully attached [ 4.802806] usb 1-8: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))... [ 4.807539] r820t 7-001a: creating new instance [ 4.814285] r820t 7-001a: Rafael Micro r820t successfully identified [ 4.818155] media: Linux media interface: v0.10 [ 4.823694] videodev: Linux video capture interface: v2.00 [ 4.833489] rtl2832_sdr rtl2832_sdr.0.auto: Registered as swradio0 [ 4.833490] rtl2832_sdr rtl2832_sdr.0.auto: Realtek RTL2832 SDR attached [ 4.833491] rtl2832_sdr rtl2832_sdr.0.auto: SDR API is still slightly experimental and functionality changes may follow [ 4.839845] Registered IR keymap rc-empty [ 4.839867] rc rc0: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb1/1-8/rc/rc0 [ 4.839886] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb1/1-8/rc/rc0/input17 [ 4.839955] rc rc0: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 0, raw IR receiver, no transmitter [ 4.839974] usb 1-8: dvb_usb_v2: schedule remote query interval to 200 msecs [ 4.847860] usb 1-8: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ 4.848438] usbcore: registered new interface driver dvb_usb_rtl28xxu [ 4.902503] [drm:drm_mode_addfb2 [drm]] [FB:138] [ 4.902532] [drm:drm_mode_setcrtc [drm]] [CRTC:47:pipe A] [ 4.902557] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:99:HDMI-A-2] [ 4.927553] usb 1-10.1: new high-speed USB device number 9 using xhci_hcd [ 5.005904] usb 1-10.1: New USB device found, idVendor=03f0, idProduct=0953, bcdDevice= 3.14 [ 5.005906] usb 1-10.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.005907] usb 1-10.1: Product: OfficeJet 5200 series [ 5.005907] usb 1-10.1: Manufacturer: HP [ 5.005908] usb 1-10.1: SerialNumber: TH87N5B042 [ 5.074873] usb 1-10.2: new low-speed USB device number 10 using xhci_hcd [ 5.156573] usb 1-10.2: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00 [ 5.156574] usb 1-10.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.156575] usb 1-10.2: Product: USB Optical Mouse [ 5.156575] usb 1-10.2: Manufacturer: Logitech [ 5.223556] usb 1-10.3: new low-speed USB device number 11 using xhci_hcd [ 5.316821] usb 1-10.3: New USB device found, idVendor=03f0, idProduct=0024, bcdDevice= 1.30 [ 5.316823] usb 1-10.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.316823] usb 1-10.3: Product: HP Basic USB Keyboard [ 5.316824] usb 1-10.3: Manufacturer: CHICONY [ 5.380860] hidraw: raw HID events driver (C) Jiri Kosina [ 5.428363] usbcore: registered new interface driver usbhid [ 5.428364] usbhid: USB HID core driver [ 5.467105] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.2/1-10.2:1.0/0003:046D:C077.0001/input/input18 [ 5.467188] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-10.2/input0 [ 5.467281] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.3/1-10.3:1.0/0003:03F0:0024.0002/input/input19 [ 5.519704] hid-generic 0003:03F0:0024.0002: input,hidraw1: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:14.0-10.3/input0 [ 5.713066] virbr0: port 1(virbr0-nic) entered blocking state [ 5.713067] virbr0: port 1(virbr0-nic) entered disabled state [ 5.713095] device virbr0-nic entered promiscuous mode [ 5.768190] virbr0: port 1(virbr0-nic) entered blocking state [ 5.768192] virbr0: port 1(virbr0-nic) entered listening state [ 5.768656] usblp 1-10.1:1.1: usblp0: USB Bidirectional printer dev 9 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0953 [ 5.768677] usbcore: registered new interface driver usblp [ 5.788533] virbr0: port 1(virbr0-nic) entered disabled state [ 6.377741] [drm:drm_mode_addfb2 [drm]] [FB:139] [ 6.571291] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:85:DP-1] [ 6.571343] [drm:intel_dp_detect [i915]] [CONNECTOR:85:DP-1] [ 6.571378] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:85:DP-1] disconnected [ 6.571389] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:93:HDMI-A-1] [ 6.571406] [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-1] [ 6.571681] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 6.571698] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 6.571985] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 6.572011] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 6.572026] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 6.572040] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 6.580285] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 6.580300] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 6.580690] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 6.580706] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 6.580980] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 6.581016] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 6.581019] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:93:HDMI-A-1] disconnected [ 6.581032] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:HDMI-A-2] [ 6.581048] [drm:intel_hdmi_detect [i915]] [CONNECTOR:99:HDMI-A-2] [ 6.607923] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 6.607939] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 6.608233] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 6.608268] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 6.608277] [drm:drm_detect_monitor_audio [drm]] Monitor has basic audio support [ 6.608285] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 6.608292] [drm:drm_add_display_info [drm]] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 6.608301] [drm:drm_add_edid_modes.part.34 [drm]] ELD monitor LG FULL HD [ 6.608308] [drm:drm_add_edid_modes.part.34 [drm]] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 [ 6.608315] [drm:drm_add_edid_modes.part.34 [drm]] ELD size 36, SAD count 1 [ 6.608322] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 6.608328] [drm:drm_add_display_info [drm]] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 6.608493] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:99:HDMI-A-2] probed modes : [ 6.608500] [drm:drm_mode_debug_printmodeline [drm]] Modeline 105:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 6.608507] [drm:drm_mode_debug_printmodeline [drm]] Modeline 107:"1920x1080" 75 174500 1920 1968 2000 2080 1080 1083 1088 1119 0x40 0x5 [ 6.608514] [drm:drm_mode_debug_printmodeline [drm]] Modeline 125:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 6.608520] [drm:drm_mode_debug_printmodeline [drm]] Modeline 133:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 6.608527] [drm:drm_mode_debug_printmodeline [drm]] Modeline 130:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 6.608533] [drm:drm_mode_debug_printmodeline [drm]] Modeline 113:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 6.608546] [drm:drm_mode_debug_printmodeline [drm]] Modeline 116:"1400x1050" 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x40 0x9 [ 6.608582] [drm:drm_mode_debug_printmodeline [drm]] Modeline 114:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 [ 6.608589] [drm:drm_mode_debug_printmodeline [drm]] Modeline 121:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 6.608597] [drm:drm_mode_debug_printmodeline [drm]] Modeline 111:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 6.608606] [drm:drm_mode_debug_printmodeline [drm]] Modeline 112:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 6.608615] [drm:drm_mode_debug_printmodeline [drm]] Modeline 115:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 [ 6.608636] [drm:drm_mode_debug_printmodeline [drm]] Modeline 110:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 6.608644] [drm:drm_mode_debug_printmodeline [drm]] Modeline 108:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 6.608652] [drm:drm_mode_debug_printmodeline [drm]] Modeline 126:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 6.608660] [drm:drm_mode_debug_printmodeline [drm]] Modeline 135:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 6.608668] [drm:drm_mode_debug_printmodeline [drm]] Modeline 132:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 6.608676] [drm:drm_mode_debug_printmodeline [drm]] Modeline 122:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 6.608684] [drm:drm_mode_debug_printmodeline [drm]] Modeline 123:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 6.608691] [drm:drm_mode_debug_printmodeline [drm]] Modeline 124:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 6.608699] [drm:drm_mode_debug_printmodeline [drm]] Modeline 117:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 6.608706] [drm:drm_mode_debug_printmodeline [drm]] Modeline 129:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 6.608712] [drm:drm_mode_debug_printmodeline [drm]] Modeline 136:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 6.608720] [drm:drm_mode_debug_printmodeline [drm]] Modeline 140:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 6.608728] [drm:drm_mode_debug_printmodeline [drm]] Modeline 109:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 6.608734] [drm:drm_mode_debug_printmodeline [drm]] Modeline 127:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 6.608741] [drm:drm_mode_debug_printmodeline [drm]] Modeline 118:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 6.608748] [drm:drm_mode_debug_printmodeline [drm]] Modeline 137:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 6.608755] [drm:drm_mode_debug_printmodeline [drm]] Modeline 119:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 6.608761] [drm:drm_mode_debug_printmodeline [drm]] Modeline 128:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 6.608768] [drm:drm_mode_debug_printmodeline [drm]] Modeline 120:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 6.664394] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 6.664397] e1000e 0000:00:1f.6 eno1: 10/100 speed: disabling TSO [ 6.664453] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 6.764523] bridge0: port 1(eno1) entered blocking state [ 6.764539] bridge0: port 1(eno1) entered disabled state [ 6.764634] device eno1 entered promiscuous mode [ 10.760499] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 10.760561] bridge0: port 1(eno1) entered blocking state [ 10.760562] bridge0: port 1(eno1) entered listening state [ 10.840419] usblp0: removed [ 10.842057] usblp 1-10.1:1.1: usblp0: USB Bidirectional printer dev 9 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0953 [ 13.764559] bridge0: port 1(eno1) entered learning state [ 16.772564] bridge0: port 1(eno1) entered forwarding state [ 16.772565] bridge0: topology change detected, propagating [ 17.395307] [drm:drm_mode_setcrtc [drm]] [CRTC:47:pipe A] [ 17.395318] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:99:HDMI-A-2] [ 17.395346] [drm:intel_atomic_check [i915]] [CONNECTOR:99:HDMI-A-2] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 17.395370] [drm:intel_hdmi_compute_config [i915]] picking bpc to 8 for HDMI output [ 17.395386] [drm:intel_hdmi_compute_config [i915]] forcing pipe bpp to 24 for HDMI [ 17.395402] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 24, dithering: 0 [ 17.395418] [drm:intel_dump_pipe_config [i915]] [CRTC:47:pipe A][modeset] [ 17.395433] [drm:intel_dump_pipe_config [i915]] output_types: HDMI (0x40) [ 17.395448] [drm:intel_dump_pipe_config [i915]] output format: RGB [ 17.395463] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 [ 17.395478] [drm:intel_dump_pipe_config [i915]] audio: 1, infoframes: 1 [ 17.395493] [drm:intel_dump_pipe_config [i915]] requested mode: [ 17.395501] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 174500 1920 1968 2000 2080 1080 1083 1088 1119 0x0 0x5 [ 17.395516] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 17.395523] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 174500 1920 1968 2000 2080 1080 1083 1088 1119 0x0 0x5 [ 17.395539] [drm:intel_dump_pipe_config [i915]] crtc timings: 174500 1920 1968 2000 2080 1080 1083 1088 1119, type: 0x0 flags: 0x5 [ 17.395624] [drm:intel_dump_pipe_config [i915]] port clock: 174500, pipe src size: 1920x1080, pixel rate 174500 [ 17.395640] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 17.395657] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 17.395674] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 17.395690] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x21, cfgcr1: 0x80400173, cfgcr2: 0x3a5 [ 17.395706] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 17.395722] [drm:intel_dump_pipe_config [i915]] [PLANE:30:plane 1A] FB:106, fb = 1920x1080 format = XR24 little-endian (0x34325258) [ 17.395739] [drm:intel_dump_pipe_config [i915]] scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080 [ 17.395756] [drm:intel_dump_pipe_config [i915]] [PLANE:37:plane 2A] disabled, scaler_id = -1 [ 17.395773] [drm:intel_dump_pipe_config [i915]] [PLANE:44:cursor A] disabled, scaler_id = -1 [ 17.395789] [drm:intel_modeset_checks [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 17.395806] [drm:intel_modeset_checks [i915]] New voltage level calculated to be logical 0, actual 0 [ 17.395825] [drm:intel_find_shared_dpll [i915]] [CRTC:47:pipe A] allocated DPLL 1 [ 17.395840] [drm:intel_reference_shared_dpll [i915]] using DPLL 1 for pipe A [ 17.396330] [drm:hsw_audio_codec_disable [i915]] Disable audio codec on pipe A [ 17.396349] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 17.396374] [drm:intel_disable_pipe [i915]] disabling pipe A [ 17.412610] [drm:intel_power_well_disable [i915]] disabling DDI C IO power well [ 17.412630] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 17.412648] [drm:intel_disable_shared_dpll [i915]] disable DPLL 1 (active 1, on? 1) for crtc 47 [ 17.412666] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 1 [ 17.412685] [drm:intel_atomic_commit_tail [i915]] [ENCODER:84:DDI B] [ 17.412700] [drm:intel_atomic_commit_tail [i915]] [ENCODER:86:DP-MST A] [ 17.412715] [drm:intel_atomic_commit_tail [i915]] [ENCODER:87:DP-MST B] [ 17.412730] [drm:intel_atomic_commit_tail [i915]] [ENCODER:88:DP-MST C] [ 17.412745] [drm:intel_atomic_commit_tail [i915]] [ENCODER:98:DDI C] [ 17.412760] [drm:verify_single_dpll_state.isra.106 [i915]] DPLL 0 [ 17.412775] [drm:verify_single_dpll_state.isra.106 [i915]] DPLL 1 [ 17.412790] [drm:verify_single_dpll_state.isra.106 [i915]] DPLL 2 [ 17.412805] [drm:verify_single_dpll_state.isra.106 [i915]] DPLL 3 [ 17.412822] [drm:intel_enable_shared_dpll [i915]] enable DPLL 1 (active 1, on? 0) for crtc 47 [ 17.412836] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 1 [ 17.412918] [drm:intel_power_well_enable [i915]] enabling DDI C IO power well [ 17.413001] [drm:intel_enable_pipe [i915]] enabling pipe A [ 17.413023] [drm:intel_audio_codec_enable [i915]] ELD on [CONNECTOR:99:HDMI-A-2], [ENCODER:98:DDI C] [ 17.413038] [drm:hsw_audio_codec_enable [i915]] Enable audio codec on pipe A, 36 bytes ELD [ 17.413056] [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 174500 not found, falling back to defaults [ 17.413071] [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000) [ 17.413086] [drm:hsw_audio_config_update [i915]] using automatic N [ 17.413111] [drm:intel_fbc_enable [i915]] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1 [ 17.413125] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 17.426477] [drm:verify_connector_state.isra.105 [i915]] [CONNECTOR:99:HDMI-A-2] [ 17.426499] [drm:intel_atomic_commit_tail [i915]] [CRTC:47:pipe A] [ 17.426524] [drm:verify_single_dpll_state.isra.106 [i915]] DPLL 1 [ 17.557231] [drm:drm_mode_addfb2 [drm]] [FB:134] [ 17.622990] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 17.623007] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 17.623023] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 17.623041] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 17.623056] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 17.623071] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 17.623086] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 17.623100] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 17.635761] [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 174500 not found, falling back to defaults [ 17.635778] [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000) [ 17.635794] [drm:hsw_audio_config_update [i915]] using automatic N [ 42.773949] [drm:drm_mode_addfb2 [drm]] [FB:104] [ 48.162692] [drm:drm_mode_addfb2 [drm]] [FB:134] [ 58.894708] [drm:drm_mode_addfb2 [drm]] [FB:104] [ 74.194321] [drm:drm_mode_addfb2 [drm]] [FB:102] [ 80.196867] [drm:drm_mode_addfb2 [drm]] [FB:104] [ 91.194230] [drm:drm_mode_addfb2 [drm]] [FB:106] [ 331.207830] [drm:drm_mode_addfb2 [drm]] [FB:104] [ 670.706547] [drm:intel_atomic_check [i915]] [CONNECTOR:99:HDMI-A-2] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 670.706572] [drm:intel_hdmi_compute_config [i915]] picking bpc to 8 for HDMI output [ 670.706588] [drm:intel_hdmi_compute_config [i915]] forcing pipe bpp to 24 for HDMI [ 670.706604] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 24, dithering: 0 [ 670.706620] [drm:intel_dump_pipe_config [i915]] [CRTC:47:pipe A][modeset] [ 670.706635] [drm:intel_dump_pipe_config [i915]] output_types: HDMI (0x40) [ 670.706650] [drm:intel_dump_pipe_config [i915]] output format: RGB [ 670.706665] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 [ 670.706679] [drm:intel_dump_pipe_config [i915]] audio: 1, infoframes: 1 [ 670.706694] [drm:intel_dump_pipe_config [i915]] requested mode: [ 670.706703] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 174500 1920 1968 2000 2080 1080 1083 1088 1119 0x0 0x5 [ 670.706718] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 670.706726] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 174500 1920 1968 2000 2080 1080 1083 1088 1119 0x0 0x5 [ 670.706741] [drm:intel_dump_pipe_config [i915]] crtc timings: 174500 1920 1968 2000 2080 1080 1083 1088 1119, type: 0x0 flags: 0x5 [ 670.706757] [drm:intel_dump_pipe_config [i915]] port clock: 174500, pipe src size: 1920x1080, pixel rate 174500 [ 670.706772] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 670.706786] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 670.706801] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 670.706816] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x21, cfgcr1: 0x808aab6b, cfgcr2: 0x105 [ 670.706831] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 670.706846] [drm:intel_dump_pipe_config [i915]] [PLANE:30:plane 1A] FB:102, fb = 1920x1080 format = XR24 little-endian (0x34325258) [ 670.706873] [drm:intel_dump_pipe_config [i915]] scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080 [ 670.706889] [drm:intel_dump_pipe_config [i915]] [PLANE:37:plane 2A] disabled, scaler_id = -1 [ 670.706905] [drm:intel_dump_pipe_config [i915]] [PLANE:44:cursor A] disabled, scaler_id = -1 [ 670.706922] [drm:intel_modeset_checks [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 670.706939] [drm:intel_modeset_checks [i915]] New voltage level calculated to be logical 0, actual 0 [ 670.706959] [drm:intel_find_shared_dpll [i915]] [CRTC:47:pipe A] allocated DPLL 1 [ 670.706974] [drm:intel_reference_shared_dpll [i915]] using DPLL 1 for pipe A [ 670.706992] [drm:skl_compute_wm [i915]] [PLANE:30:plane 1A] ddb (0 - 860) -> (0 - 0) [ 670.707004] [drm:skl_compute_wm [i915]] [PLANE:44:cursor A] ddb (860 - 892) -> (0 - 0) [ 670.707045] [drm:hsw_audio_codec_disable [i915]] Disable audio codec on pipe A [ 670.707064] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 670.707093] [drm:intel_disable_pipe [i915]] disabling pipe A [ 670.719918] [drm:intel_power_well_disable [i915]] disabling DDI C IO power well [ 670.719938] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 670.719957] [drm:intel_disable_shared_dpll [i915]] disable DPLL 1 (active 1, on? 1) for crtc 47 [ 670.719974] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 1 [ 670.719993] [drm:intel_atomic_commit_tail [i915]] [ENCODER:84:DDI B] [ 670.720009] [drm:intel_atomic_commit_tail [i915]] [ENCODER:86:DP-MST A] [ 670.720024] [drm:intel_atomic_commit_tail [i915]] [ENCODER:87:DP-MST B] [ 670.720039] [drm:intel_atomic_commit_tail [i915]] [ENCODER:88:DP-MST C] [ 670.720054] [drm:intel_atomic_commit_tail [i915]] [ENCODER:98:DDI C] [ 670.720069] [drm:verify_single_dpll_state.isra.106 [i915]] DPLL 0 [ 670.720085] [drm:verify_single_dpll_state.isra.106 [i915]] DPLL 1 [ 670.720100] [drm:verify_single_dpll_state.isra.106 [i915]] DPLL 2 [ 670.720115] [drm:verify_single_dpll_state.isra.106 [i915]] DPLL 3 [ 670.720130] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 670.720150] [drm:verify_connector_state.isra.105 [i915]] [CONNECTOR:99:HDMI-A-2] [ 670.720166] [drm:intel_atomic_commit_tail [i915]] [CRTC:47:pipe A] [ 670.720182] [drm:verify_single_dpll_state.isra.106 [i915]] DPLL 1 [ 834.212472] [drm:drm_mode_setcrtc [drm]] [CRTC:47:pipe A] [ 834.212484] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:99:HDMI-A-2] [ 834.212512] [drm:intel_atomic_check [i915]] [CONNECTOR:99:HDMI-A-2] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 834.212536] [drm:intel_hdmi_compute_config [i915]] picking bpc to 8 for HDMI output [ 834.212551] [drm:intel_hdmi_compute_config [i915]] forcing pipe bpp to 24 for HDMI [ 834.212567] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 24, dithering: 0 [ 834.212583] [drm:intel_dump_pipe_config [i915]] [CRTC:47:pipe A][modeset] [ 834.212598] [drm:intel_dump_pipe_config [i915]] output_types: HDMI (0x40) [ 834.212614] [drm:intel_dump_pipe_config [i915]] output format: RGB [ 834.212629] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 [ 834.212643] [drm:intel_dump_pipe_config [i915]] audio: 1, infoframes: 1 [ 834.212658] [drm:intel_dump_pipe_config [i915]] requested mode: [ 834.212681] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 174500 1920 1968 2000 2080 1080 1083 1088 1119 0x0 0x5 [ 834.212696] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 834.212705] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 174500 1920 1968 2000 2080 1080 1083 1088 1119 0x0 0x5 [ 834.212722] [drm:intel_dump_pipe_config [i915]] crtc timings: 174500 1920 1968 2000 2080 1080 1083 1088 1119, type: 0x0 flags: 0x5 [ 834.212739] [drm:intel_dump_pipe_config [i915]] port clock: 174500, pipe src size: 1920x1080, pixel rate 174500 [ 834.212756] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 834.212772] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 834.212787] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 834.212804] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x21, cfgcr1: 0x808aab6b, cfgcr2: 0x105 [ 834.212820] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 834.212837] [drm:intel_dump_pipe_config [i915]] [PLANE:30:plane 1A] FB:102, fb = 1920x1080 format = XR24 little-endian (0x34325258) [ 834.212853] [drm:intel_dump_pipe_config [i915]] scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080 [ 834.212869] [drm:intel_dump_pipe_config [i915]] [PLANE:37:plane 2A] disabled, scaler_id = -1 [ 834.212886] [drm:intel_dump_pipe_config [i915]] [PLANE:44:cursor A] disabled, scaler_id = -1 [ 834.212903] [drm:intel_modeset_checks [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 834.212919] [drm:intel_modeset_checks [i915]] New voltage level calculated to be logical 0, actual 0 [ 834.212939] [drm:intel_find_shared_dpll [i915]] [CRTC:47:pipe A] allocated DPLL 1 [ 834.212954] [drm:intel_reference_shared_dpll [i915]] using DPLL 1 for pipe A [ 834.212972] [drm:skl_compute_wm [i915]] [PLANE:30:plane 1A] ddb (0 - 0) -> (0 - 860) [ 834.212984] [drm:skl_compute_wm [i915]] [PLANE:44:cursor A] ddb (0 - 0) -> (860 - 892) [ 834.213009] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 834.213031] [drm:intel_atomic_commit_tail [i915]] [ENCODER:84:DDI B] [ 834.213046] [drm:intel_atomic_commit_tail [i915]] [ENCODER:86:DP-MST A] [ 834.213061] [drm:intel_atomic_commit_tail [i915]] [ENCODER:87:DP-MST B] [ 834.213076] [drm:intel_atomic_commit_tail [i915]] [ENCODER:88:DP-MST C] [ 834.213091] [drm:intel_atomic_commit_tail [i915]] [ENCODER:98:DDI C] [ 834.213107] [drm:verify_single_dpll_state.isra.106 [i915]] DPLL 0 [ 834.213123] [drm:verify_single_dpll_state.isra.106 [i915]] DPLL 1 [ 834.213138] [drm:verify_single_dpll_state.isra.106 [i915]] DPLL 2 [ 834.213154] [drm:verify_single_dpll_state.isra.106 [i915]] DPLL 3 [ 834.213170] [drm:intel_enable_shared_dpll [i915]] enable DPLL 1 (active 1, on? 0) for crtc 47 [ 834.213185] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 1 [ 834.213268] [drm:intel_power_well_enable [i915]] enabling DDI C IO power well [ 834.213350] [drm:intel_enable_pipe [i915]] enabling pipe A [ 834.213736] [drm:intel_audio_codec_enable [i915]] ELD on [CONNECTOR:99:HDMI-A-2], [ENCODER:98:DDI C] [ 834.213751] [drm:hsw_audio_codec_enable [i915]] Enable audio codec on pipe A, 36 bytes ELD [ 834.213770] [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 174500 not found, falling back to defaults [ 834.213787] [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000) [ 834.213803] [drm:hsw_audio_config_update [i915]] using automatic N [ 834.213859] [drm:intel_fbc_enable [i915]] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1 [ 834.213874] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 834.227252] [drm:verify_connector_state.isra.105 [i915]] [CONNECTOR:99:HDMI-A-2] [ 834.227274] [drm:intel_atomic_commit_tail [i915]] [CRTC:47:pipe A] [ 834.227299] [drm:verify_single_dpll_state.isra.106 [i915]] DPLL 1