[ 0.000000] microcode: microcode updated early to revision 0xb4, date = 2019-04-01 [ 0.000000] Linux version 5.4.0-rc2+ (root@server) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Thu Oct 10 23:42:49 CEST 2019 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.4.0-rc2+ root=UUID=6083137a-17e3-4fa1-a613-bb58aef37646 ro rootflags=subvol=@ quiet consoleblank=90 drm.debug=0x1e log_buf_len=16M [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000078600fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000078601000-0x0000000078601fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000078602000-0x0000000078602fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000078603000-0x0000000086371fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000086372000-0x000000008669cfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000008669d000-0x0000000086b2ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000086b30000-0x0000000086e97fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000086e98000-0x00000000873a3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000873a4000-0x00000000873fefff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000873ff000-0x00000000873fffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000087400000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000086effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.50 by American Megatrends [ 0.000000] efi: ACPI=0x86e30000 ACPI 2.0=0x86e30000 SMBIOS=0x87315000 SMBIOS 3.0=0x87314000 ESRT=0x84cdfb18 [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./B250M-HDV, BIOS P2.50 02/23/2018 [ 0.000000] tsc: Detected 3500.000 MHz processor [ 0.001978] tsc: Detected 3499.912 MHz TSC [ 0.001978] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001979] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001984] last_pfn = 0x86f000 max_arch_pfn = 0x400000000 [ 0.001998] MTRR default type: write-back [ 0.001998] MTRR fixed ranges enabled: [ 0.001999] 00000-9FFFF write-back [ 0.002000] A0000-BFFFF uncachable [ 0.002000] C0000-FFFFF write-protect [ 0.002001] MTRR variable ranges enabled: [ 0.002002] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.002002] 1 base 00A0000000 mask 7FE0000000 uncachable [ 0.002003] 2 base 0090000000 mask 7FF0000000 uncachable [ 0.002003] 3 base 0088000000 mask 7FF8000000 uncachable [ 0.002004] 4 base 0087800000 mask 7FFF800000 uncachable [ 0.002004] 5 disabled [ 0.002004] 6 disabled [ 0.002005] 7 disabled [ 0.002005] 8 disabled [ 0.002005] 9 disabled [ 0.002394] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002537] last_pfn = 0x87400 max_arch_pfn = 0x400000000 [ 0.008456] esrt: Reserving ESRT space from 0x0000000084cdfb18 to 0x0000000084cdfb50. [ 0.008462] Using GB pages for direct mapping [ 0.008464] BRK [0x5df601000, 0x5df601fff] PGTABLE [ 0.008465] BRK [0x5df602000, 0x5df602fff] PGTABLE [ 0.008466] BRK [0x5df603000, 0x5df603fff] PGTABLE [ 0.008497] BRK [0x5df604000, 0x5df604fff] PGTABLE [ 0.008498] BRK [0x5df605000, 0x5df605fff] PGTABLE [ 0.008613] BRK [0x5df606000, 0x5df606fff] PGTABLE [ 0.008640] BRK [0x5df607000, 0x5df607fff] PGTABLE [ 0.008691] BRK [0x5df608000, 0x5df608fff] PGTABLE [ 0.008732] BRK [0x5df609000, 0x5df609fff] PGTABLE [ 0.008781] BRK [0x5df60a000, 0x5df60afff] PGTABLE [ 0.008860] BRK [0x5df60b000, 0x5df60bfff] PGTABLE [ 0.008912] BRK [0x5df60c000, 0x5df60cfff] PGTABLE [ 0.009525] printk: log_buf_len: 16777216 bytes [ 0.009526] printk: early log buf free: 126024(96%) [ 0.009527] Secure boot could not be determined [ 0.009528] RAMDISK: [mem 0x363bd000-0x371d5fff] [ 0.009543] ACPI: Early table checksum verification disabled [ 0.009546] ACPI: RSDP 0x0000000086E30000 000024 (v02 ALASKA) [ 0.009548] ACPI: XSDT 0x0000000086E30098 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.009552] ACPI: FACP 0x0000000086E51C38 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.009556] ACPI: DSDT 0x0000000086E301E8 021A50 (v02 ALASKA A M I 01072009 INTL 20160422) [ 0.009557] ACPI: FACS 0x0000000086E97C40 000040 [ 0.009559] ACPI: APIC 0x0000000086E51D50 000084 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.009560] ACPI: FPDT 0x0000000086E51DD8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.009562] ACPI: MCFG 0x0000000086E51E20 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.009563] ACPI: FIDT 0x0000000086E51E60 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.009565] ACPI: AAFT 0x0000000086E51F00 000279 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.009566] ACPI: SSDT 0x0000000086E52180 003154 (v02 SaSsdt SaSsdt 00003000 INTL 20160422) [ 0.009568] ACPI: SSDT 0x0000000086E552D8 0023CB (v02 PegSsd PegSsdt 00001000 INTL 20160422) [ 0.009569] ACPI: HPET 0x0000000086E576A8 000038 (v01 INTEL KBL 00000001 MSFT 0000005F) [ 0.009571] ACPI: SSDT 0x0000000086E576E0 000A2A (v02 INTEL xh_rvp08 00000000 INTL 20160422) [ 0.009573] ACPI: UEFI 0x0000000086E58110 000042 (v01 INTEL EDK2 00000002 01000013) [ 0.009574] ACPI: SSDT 0x0000000086E58158 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) [ 0.009576] ACPI: LPIT 0x0000000086E59038 000094 (v01 INTEL KBL 00000000 MSFT 0000005F) [ 0.009577] ACPI: WSMT 0x0000000086E590D0 000028 (v01 INTEL KBL 00000000 MSFT 0000005F) [ 0.009579] ACPI: DBGP 0x0000000086E590F8 000034 (v01 INTEL 00000002 MSFT 0000005F) [ 0.009580] ACPI: DBG2 0x0000000086E59130 000054 (v00 INTEL 00000002 MSFT 0000005F) [ 0.009582] ACPI: DMAR 0x0000000086E59188 0000A8 (v01 INTEL KBL 00000001 INTL 00000001) [ 0.009583] ACPI: ASF! 0x0000000086E59230 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.009589] ACPI: Local APIC address 0xfee00000 [ 0.009737] No NUMA configuration found [ 0.009738] Faking a node at [mem 0x0000000000000000-0x000000086effffff] [ 0.009740] NODE_DATA(0) allocated [mem 0x86dffb000-0x86dffffff] [ 0.009770] Zone ranges: [ 0.009771] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.009772] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.009772] Normal [mem 0x0000000100000000-0x000000086effffff] [ 0.009773] Device empty [ 0.009774] Movable zone start for each node [ 0.009774] Early memory node ranges [ 0.009775] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.009775] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.009776] node 0: [mem 0x0000000000100000-0x0000000078600fff] [ 0.009776] node 0: [mem 0x0000000078603000-0x0000000086371fff] [ 0.009777] node 0: [mem 0x000000008669d000-0x0000000086b2ffff] [ 0.009777] node 0: [mem 0x00000000873ff000-0x00000000873fffff] [ 0.009777] node 0: [mem 0x0000000100000000-0x000000086effffff] [ 0.009814] Zeroed struct page in unavailable ranges: 6240 pages [ 0.009814] Initmem setup node 0 [mem 0x0000000000001000-0x000000086effffff] [ 0.009815] On node 0 totalpages: 8345504 [ 0.009816] DMA zone: 64 pages used for memmap [ 0.009816] DMA zone: 23 pages reserved [ 0.009817] DMA zone: 3996 pages, LIFO batch:0 [ 0.009845] DMA32 zone: 8545 pages used for memmap [ 0.009846] DMA32 zone: 546820 pages, LIFO batch:63 [ 0.014624] Normal zone: 121792 pages used for memmap [ 0.014625] Normal zone: 7794688 pages, LIFO batch:63 [ 0.065886] Reserving Intel graphics memory at [mem 0x88000000-0x8fffffff] [ 0.066080] ACPI: PM-Timer IO Port: 0x1808 [ 0.066081] ACPI: Local APIC address 0xfee00000 [ 0.066085] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.066085] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.066085] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.066086] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.066122] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.066123] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.066124] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.066125] ACPI: IRQ0 used by override. [ 0.066125] ACPI: IRQ9 used by override. [ 0.066127] Using ACPI (MADT) for SMP configuration information [ 0.066128] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.066130] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.066144] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.066145] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.066146] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.066147] PM: Registered nosave memory: [mem 0x78601000-0x78601fff] [ 0.066147] PM: Registered nosave memory: [mem 0x78602000-0x78602fff] [ 0.066148] PM: Registered nosave memory: [mem 0x86372000-0x8669cfff] [ 0.066149] PM: Registered nosave memory: [mem 0x86b30000-0x86e97fff] [ 0.066149] PM: Registered nosave memory: [mem 0x86e98000-0x873a3fff] [ 0.066149] PM: Registered nosave memory: [mem 0x873a4000-0x873fefff] [ 0.066150] PM: Registered nosave memory: [mem 0x87400000-0x8fffffff] [ 0.066151] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff] [ 0.066151] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.066152] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff] [ 0.066152] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.066152] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.066152] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.066153] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.066153] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.066153] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.066154] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.066155] [mem 0x90000000-0xdfffffff] available for PCI devices [ 0.066156] Booting paravirtualized kernel on bare hardware [ 0.066158] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.123991] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.124112] percpu: Embedded 53 pages/cpu s177880 r8192 d31016 u524288 [ 0.124118] pcpu-alloc: s177880 r8192 d31016 u524288 alloc=1*2097152 [ 0.124118] pcpu-alloc: [0] 0 1 2 3 [ 0.124135] Built 1 zonelists, mobility grouping on. Total pages: 8215080 [ 0.124136] Policy zone: Normal [ 0.124137] Kernel command line: BOOT_IMAGE=/vmlinuz-5.4.0-rc2+ root=UUID=6083137a-17e3-4fa1-a613-bb58aef37646 ro rootflags=subvol=@ quiet consoleblank=90 drm.debug=0x1e log_buf_len=16M [ 0.125270] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.125813] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.125845] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.128012] Calgary: detecting Calgary via BIOS EBDA area [ 0.128014] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.176126] Memory: 32458852K/33382016K available (10243K kernel code, 1174K rwdata, 3404K rodata, 1636K init, 2192K bss, 923164K reserved, 0K cma-reserved) [ 0.176208] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.176215] Kernel/User page tables isolation: enabled [ 0.176225] ftrace: allocating 32834 entries in 129 pages [ 0.185085] rcu: Hierarchical RCU implementation. [ 0.185086] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.185087] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.185087] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.186931] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16 [ 0.187260] random: crng done (trusting CPU's manufacturer) [ 0.187275] Console: colour dummy device 80x25 [ 0.187278] printk: console [tty0] enabled [ 0.187289] ACPI: Core revision 20190816 [ 0.187490] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.187557] APIC: Switch to symmetric I/O mode setup [ 0.187558] DMAR: Host address width 39 [ 0.187559] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.187563] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.187563] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.187565] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.187566] DMAR: RMRR base: 0x0000008662d000 end: 0x0000008664cfff [ 0.187567] DMAR: RMRR base: 0x00000087800000 end: 0x0000008fffffff [ 0.187568] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.187569] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.187569] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.188984] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.188984] x2apic enabled [ 0.188996] Switched APIC routing to cluster x2apic. [ 0.193097] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.211566] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3272fd97217, max_idle_ns: 440795241220 ns [ 0.211570] Calibrating delay loop (skipped), value calculated using timer frequency.. 6999.82 BogoMIPS (lpj=13999648) [ 0.211571] pid_max: default: 32768 minimum: 301 [ 0.216590] LSM: Security Framework initializing [ 0.216594] Yama: becoming mindful. [ 0.216607] AppArmor: AppArmor initialized [ 0.216608] TOMOYO Linux initialized [ 0.216650] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.216684] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.216844] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.216855] process: using mwait in idle threads [ 0.216857] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.216858] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.216859] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.216860] Spectre V2 : Mitigation: Full generic retpoline [ 0.216860] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.216861] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.216862] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.216862] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.216863] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.216865] MDS: Mitigation: Clear CPU buffers [ 0.217039] Freeing SMP alternatives memory: 24K [ 0.218527] TSC deadline timer enabled [ 0.218532] smpboot: CPU0: Intel(R) Pentium(R) CPU G4560 @ 3.50GHz (family: 0x6, model: 0x9e, stepping: 0x9) [ 0.218596] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.218600] ... version: 4 [ 0.218600] ... bit width: 48 [ 0.218600] ... generic registers: 4 [ 0.218601] ... value mask: 0000ffffffffffff [ 0.218601] ... max period: 00007fffffffffff [ 0.218602] ... fixed-purpose events: 3 [ 0.218602] ... event mask: 000000070000000f [ 0.218627] rcu: Hierarchical SRCU implementation. [ 0.219027] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.219054] smp: Bringing up secondary CPUs ... [ 0.219096] x86: Booting SMP configuration: [ 0.219097] .... node #0, CPUs: #1 #2 [ 0.219568] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.219568] #3 [ 0.219568] smp: Brought up 1 node, 4 CPUs [ 0.219568] smpboot: Max logical packages: 1 [ 0.219568] smpboot: Total of 4 processors activated (27999.29 BogoMIPS) [ 0.220116] devtmpfs: initialized [ 0.220116] x86/mm: Memory block size: 128MB [ 0.222202] PM: Registering ACPI NVS region [mem 0x78601000-0x78601fff] (4096 bytes) [ 0.222202] PM: Registering ACPI NVS region [mem 0x86b30000-0x86e97fff] (3571712 bytes) [ 0.222202] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.222202] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.222202] pinctrl core: initialized pinctrl subsystem [ 0.222202] NET: Registered protocol family 16 [ 0.222202] audit: initializing netlink subsys (disabled) [ 0.222202] audit: type=2000 audit(1570801061.032:1): state=initialized audit_enabled=0 res=1 [ 0.222202] cpuidle: using governor ladder [ 0.222202] cpuidle: using governor menu [ 0.222202] ACPI: bus type PCI registered [ 0.222202] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.222202] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.222202] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.222202] PCI: Using configuration type 1 for base access [ 0.224924] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.224928] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.224928] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.467714] ACPI: Added _OSI(Module Device) [ 0.467714] ACPI: Added _OSI(Processor Device) [ 0.467714] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.467714] ACPI: Added _OSI(Processor Aggregator Device) [ 0.467714] ACPI: Added _OSI(Linux-Dell-Video) [ 0.467714] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.467714] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.494031] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.495740] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.498408] ACPI: Dynamic OEM Table Load: [ 0.498412] ACPI: SSDT 0xFFFF919849D7D000 000717 (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.499258] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.499946] ACPI: Dynamic OEM Table Load: [ 0.499949] ACPI: SSDT 0xFFFF9198498DE400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.500931] ACPI: Dynamic OEM Table Load: [ 0.500934] ACPI: SSDT 0xFFFF919849D7A000 00065C (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.501921] ACPI: Dynamic OEM Table Load: [ 0.501923] ACPI: SSDT 0xFFFF919849DDE200 00018A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.503917] ACPI: Interpreter enabled [ 0.503947] ACPI: (supports S0 S3 S4 S5) [ 0.503948] ACPI: Using IOAPIC for interrupt routing [ 0.504015] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.504503] ACPI: Enabled 7 GPEs in block 00 to 7F [ 0.508427] ACPI: Power Resource [WRST] (on) [ 0.508662] ACPI: Power Resource [WRST] (on) [ 0.508896] ACPI: Power Resource [WRST] (on) [ 0.509127] ACPI: Power Resource [WRST] (on) [ 0.509359] ACPI: Power Resource [WRST] (on) [ 0.509596] ACPI: Power Resource [WRST] (on) [ 0.509829] ACPI: Power Resource [WRST] (on) [ 0.510066] ACPI: Power Resource [WRST] (on) [ 0.510305] ACPI: Power Resource [WRST] (on) [ 0.510542] ACPI: Power Resource [WRST] (on) [ 0.510790] ACPI: Power Resource [WRST] (on) [ 0.511022] ACPI: Power Resource [WRST] (on) [ 0.511271] ACPI: Power Resource [WRST] (on) [ 0.511503] ACPI: Power Resource [WRST] (on) [ 0.511738] ACPI: Power Resource [WRST] (on) [ 0.511969] ACPI: Power Resource [WRST] (on) [ 0.512200] ACPI: Power Resource [WRST] (on) [ 0.513074] ACPI: Power Resource [WRST] (on) [ 0.513312] ACPI: Power Resource [WRST] (on) [ 0.513543] ACPI: Power Resource [WRST] (on) [ 0.520271] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.520275] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.521657] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.522048] PCI host bridge to bus 0000:00 [ 0.522049] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.522050] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.522051] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.522051] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.522052] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.522052] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.522053] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.522053] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.522054] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.522055] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.522055] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.522056] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.522056] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.522057] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.522057] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.522058] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window] [ 0.522059] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.522059] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.522067] pci 0000:00:00.0: [8086:590f] type 00 class 0x060000 [ 0.522165] pci 0000:00:02.0: [8086:5902] type 00 class 0x030000 [ 0.522173] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit] [ 0.522177] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.522180] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.522190] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.522345] pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330 [ 0.522363] pci 0000:00:14.0: reg 0x10: [mem 0xdf120000-0xdf12ffff 64bit] [ 0.522421] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.522572] pci 0000:00:14.2: [8086:a2b1] type 00 class 0x118000 [ 0.522590] pci 0000:00:14.2: reg 0x10: [mem 0xdf13a000-0xdf13afff 64bit] [ 0.522723] pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000 [ 0.522743] pci 0000:00:16.0: reg 0x10: [mem 0xdf139000-0xdf139fff 64bit] [ 0.522802] pci 0000:00:16.0: PME# supported from D3hot [ 0.522924] pci 0000:00:17.0: [8086:a282] type 00 class 0x010601 [ 0.522938] pci 0000:00:17.0: reg 0x10: [mem 0xdf134000-0xdf135fff] [ 0.522944] pci 0000:00:17.0: reg 0x14: [mem 0xdf138000-0xdf1380ff] [ 0.522949] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097] [ 0.522955] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083] [ 0.522960] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f] [ 0.522966] pci 0000:00:17.0: reg 0x24: [mem 0xdf137000-0xdf1377ff] [ 0.522998] pci 0000:00:17.0: PME# supported from D3hot [ 0.523094] pci 0000:00:1b.0: [8086:a2eb] type 01 class 0x060400 [ 0.523161] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.523255] pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400 [ 0.523321] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.523460] pci 0000:00:1f.0: [8086:a2c8] type 00 class 0x060100 [ 0.523641] pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000 [ 0.523652] pci 0000:00:1f.2: reg 0x10: [mem 0xdf130000-0xdf133fff] [ 0.523776] pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500 [ 0.523835] pci 0000:00:1f.4: reg 0x10: [mem 0xdf136000-0xdf1360ff 64bit] [ 0.523904] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] [ 0.524077] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000 [ 0.524099] pci 0000:00:1f.6: reg 0x10: [mem 0xdf100000-0xdf11ffff] [ 0.524183] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.524354] pci 0000:01:00.0: [1987:5012] type 00 class 0x010802 [ 0.524417] pci 0000:01:00.0: reg 0x10: [mem 0xdf000000-0xdf003fff 64bit] [ 0.524857] pci 0000:00:1b.0: PCI bridge to [bus 01] [ 0.524860] pci 0000:00:1b.0: bridge window [mem 0xdf000000-0xdf0fffff] [ 0.524897] pci 0000:00:1d.0: PCI bridge to [bus 02] [ 0.526261] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.526298] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.526344] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.526390] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.526428] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.526467] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.526512] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.526554] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.526796] iommu: Default domain type: Translated [ 0.526804] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.526804] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.526804] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.526804] vgaarb: loaded [ 0.526804] pps_core: LinuxPPS API ver. 1 registered [ 0.526804] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.526804] PTP clock support registered [ 0.526804] EDAC MC: Ver: 3.0.0 [ 0.526804] Registered efivars operations [ 0.539790] PCI: Using ACPI for IRQ routing [ 0.571346] PCI: pci_cache_line_size set to 64 bytes [ 0.571441] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.571442] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.571442] e820: reserve RAM buffer [mem 0x78601000-0x7bffffff] [ 0.571443] e820: reserve RAM buffer [mem 0x86372000-0x87ffffff] [ 0.571444] e820: reserve RAM buffer [mem 0x86b30000-0x87ffffff] [ 0.571444] e820: reserve RAM buffer [mem 0x87400000-0x87ffffff] [ 0.571445] e820: reserve RAM buffer [mem 0x86f000000-0x86fffffff] [ 0.571893] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.571895] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.573937] clocksource: Switched to clocksource tsc-early [ 0.577202] VFS: Disk quotas dquot_6.6.0 [ 0.577202] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.577202] AppArmor: AppArmor Filesystem Enabled [ 0.577202] pnp: PnP ACPI init [ 0.577202] system 00:00: [io 0x0280-0x028f] has been reserved [ 0.577202] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.577202] system 00:00: [io 0x02a0-0x02af] has been reserved [ 0.577202] system 00:00: [io 0x02b0-0x02bf] has been reserved [ 0.577202] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.577202] pnp 00:01: [dma 3] [ 0.577202] pnp 00:01: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.577202] pnp 00:02: [dma 0 disabled] [ 0.577202] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.577202] system 00:03: [io 0x0680-0x069f] has been reserved [ 0.577202] system 00:03: [io 0xffff] has been reserved [ 0.577202] system 00:03: [io 0xffff] has been reserved [ 0.577202] system 00:03: [io 0xffff] has been reserved [ 0.577202] system 00:03: [io 0x1800-0x18fe] has been reserved [ 0.577202] system 00:03: [io 0x164e-0x164f] has been reserved [ 0.577202] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.577202] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.577202] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.577202] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.577202] system 00:06: [io 0x1854-0x1857] has been reserved [ 0.577202] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.579623] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.579624] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.579625] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.579626] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved [ 0.579626] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.579627] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.579628] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.579629] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.579629] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.579630] system 00:07: [mem 0xdffe0000-0xdfffffff] has been reserved [ 0.579632] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.579656] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.579657] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.579658] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.579658] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.579659] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.579660] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.579661] system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.579662] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.579867] system 00:09: [io 0xff00-0xfffe] has been reserved [ 0.579869] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.580650] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.580651] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.580652] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.580654] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.581123] pnp: PnP ACPI: found 11 devices [ 0.581829] thermal_sys: Registered thermal governor 'fair_share' [ 0.581829] thermal_sys: Registered thermal governor 'bang_bang' [ 0.581830] thermal_sys: Registered thermal governor 'step_wise' [ 0.581830] thermal_sys: Registered thermal governor 'user_space' [ 0.586318] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.586339] pci 0000:00:1b.0: PCI bridge to [bus 01] [ 0.586354] pci 0000:00:1b.0: bridge window [mem 0xdf000000-0xdf0fffff] [ 0.586358] pci 0000:00:1d.0: PCI bridge to [bus 02] [ 0.586366] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.586367] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.586367] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.586368] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.586369] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.586369] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.586370] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.586370] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.586371] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.586372] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.586372] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.586373] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.586373] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.586374] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.586375] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.586375] pci_bus 0000:00: resource 19 [mem 0x90000000-0xdfffffff window] [ 0.586376] pci_bus 0000:00: resource 20 [mem 0xfd000000-0xfe7fffff window] [ 0.586377] pci_bus 0000:01: resource 1 [mem 0xdf000000-0xdf0fffff] [ 0.586470] NET: Registered protocol family 2 [ 0.586543] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.586573] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.586741] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.586809] TCP: Hash tables configured (established 262144 bind 65536) [ 0.586824] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.586863] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.586926] NET: Registered protocol family 1 [ 0.586929] NET: Registered protocol family 44 [ 0.586936] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.587184] PCI: CLS 64 bytes, default 64 [ 0.587206] Unpacking initramfs... [ 0.711893] Freeing initrd memory: 14436K [ 0.731610] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.731614] software IO TLB: mapped [mem 0x74268000-0x78268000] (64MB) [ 0.731937] Initialise system trusted keyrings [ 0.731942] Key type blacklist registered [ 0.731973] workingset: timestamp_bits=40 max_order=23 bucket_order=0 [ 0.732716] zbud: loaded [ 0.732862] Key type asymmetric registered [ 0.732862] Asymmetric key parser 'x509' registered [ 0.732867] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.732892] io scheduler mq-deadline registered [ 0.733136] pcieport 0000:00:1b.0: PME: Signaling with IRQ 122 [ 0.733322] pcieport 0000:00:1d.0: PME: Signaling with IRQ 123 [ 0.733380] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.733387] efifb: probing for efifb [ 0.733396] efifb: framebuffer at 0xc0000000, using 5120k, total 5120k [ 0.733396] efifb: mode is 1280x1024x32, linelength=5120, pages=1 [ 0.733397] efifb: scrolling: redraw [ 0.733397] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.733448] Console: switching to colour frame buffer device 160x64 [ 0.735095] fb0: EFI VGA frame buffer device [ 0.735100] intel_idle: MWAIT substates: 0x142120 [ 0.735101] intel_idle: v0.4.1 model 0x9E [ 0.735209] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.735394] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.756176] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.756496] Linux agpgart interface v0.103 [ 0.756522] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel [ 0.756523] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 0.756695] i8042: PNP: No PS/2 controller found. [ 0.756722] mousedev: PS/2 mouse device common for all mice [ 0.756752] rtc_cmos 00:05: RTC can wake from S4 [ 0.757203] rtc_cmos 00:05: registered as rtc0 [ 0.757211] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.757216] intel_pstate: Intel P-state driver initializing [ 0.757405] intel_pstate: HWP enabled [ 0.757439] ledtrig-cpu: registered to indicate activity on CPUs [ 0.757616] NET: Registered protocol family 10 [ 0.763881] Segment Routing with IPv6 [ 0.763897] mip6: Mobile IPv6 [ 0.763898] NET: Registered protocol family 17 [ 0.763918] mpls_gso: MPLS GSO support [ 0.764118] microcode: sig=0x906e9, pf=0x2, revision=0xb4 [ 0.764153] microcode: Microcode Update Driver: v2.2. [ 0.764155] IPI shorthand broadcast: enabled [ 0.764160] sched_clock: Marking stable (763804299, 345504)->(770090637, -5940834) [ 0.764205] registered taskstats version 1 [ 0.764205] Loading compiled-in X.509 certificates [ 0.764217] zswap: loaded using pool lzo/zbud [ 0.764243] AppArmor: AppArmor sha1 policy hashing enabled [ 0.764831] rtc_cmos 00:05: setting system clock to 2019-10-11T13:37:41 UTC (1570801061) [ 0.765531] Freeing unused kernel image memory: 1636K [ 0.823696] Write protecting the kernel read-only data: 16384k [ 0.824614] Freeing unused kernel image memory: 2036K [ 0.824950] Freeing unused kernel image memory: 692K [ 0.844865] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.844868] x86/mm: Checking user space page tables [ 0.863080] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.863083] Run /init as init process [ 0.947002] usbcore: module verification failed: signature and/or required key missing - tainting kernel [ 0.949856] SCSI subsystem initialized [ 0.950058] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 0.951831] ACPI: bus type USB registered [ 0.951843] usbcore: registered new interface driver usbfs [ 0.951847] usbcore: registered new interface driver hub [ 0.951860] usbcore: registered new device driver usb [ 0.953788] libata version 3.00 loaded. [ 0.954973] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.954973] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.955043] e1000e 0000:00:1f.6: enabling device (0000 -> 0002) [ 0.955222] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.956311] ahci 0000:00:17.0: version 3.0 [ 0.957356] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.957361] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.958454] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.958470] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.958647] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.958649] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.958650] usb usb1: Product: xHCI Host Controller [ 0.958651] usb usb1: Manufacturer: Linux 5.4.0-rc2+ xhci-hcd [ 0.958652] usb usb1: SerialNumber: 0000:00:14.0 [ 0.958752] hub 1-0:1.0: USB hub found [ 0.958776] hub 1-0:1.0: 12 ports detected [ 0.959851] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.959858] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.959864] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.959901] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 0.959902] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.959903] usb usb2: Product: xHCI Host Controller [ 0.959904] usb usb2: Manufacturer: Linux 5.4.0-rc2+ xhci-hcd [ 0.959905] usb usb2: SerialNumber: 0000:00:14.0 [ 0.959992] hub 2-0:1.0: USB hub found [ 0.960012] hub 2-0:1.0: 6 ports detected [ 0.967644] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.967646] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst [ 0.984037] nvme nvme0: pci function 0000:01:00.0 [ 1.027979] scsi host0: ahci [ 1.028091] scsi host1: ahci [ 1.028163] scsi host2: ahci [ 1.028244] scsi host3: ahci [ 1.028306] scsi host4: ahci [ 1.028368] scsi host5: ahci [ 1.028405] ata1: SATA max UDMA/133 abar m2048@0xdf137000 port 0xdf137100 irq 125 [ 1.028407] ata2: SATA max UDMA/133 abar m2048@0xdf137000 port 0xdf137180 irq 125 [ 1.028408] ata3: SATA max UDMA/133 abar m2048@0xdf137000 port 0xdf137200 irq 125 [ 1.028410] ata4: SATA max UDMA/133 abar m2048@0xdf137000 port 0xdf137280 irq 125 [ 1.028411] ata5: SATA max UDMA/133 abar m2048@0xdf137000 port 0xdf137300 irq 125 [ 1.028413] ata6: SATA max UDMA/133 abar m2048@0xdf137000 port 0xdf137380 irq 125 [ 1.200250] nvme nvme0: missing or invalid SUBNQN field. [ 1.200325] nvme nvme0: Shutdown timeout set to 10 seconds [ 1.201210] nvme nvme0: 4/0/0 default/read/poll queues [ 1.201634] nvme nvme0: ctrl returned bogus length: 16 for NVME_NIDT_EUI64 [ 1.201920] nvme nvme0: ctrl returned bogus length: 16 for NVME_NIDT_EUI64 [ 1.202989] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 [ 1.227484] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 1.281538] usb 1-5: new full-speed USB device number 2 using xhci_hcd [ 1.303680] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 70:85:c2:2f:42:91 [ 1.303684] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 1.303788] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 1.305982] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 1.324909] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.328402] ata1.00: ATA-9: WDC WD80EZZX-11CSGA0, 83.H0A03, max UDMA/133 [ 1.328406] ata1.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.328744] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.328768] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.328788] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.328813] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.328838] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.334172] ata1.00: configured for UDMA/133 [ 1.334498] scsi 0:0:0:0: Direct-Access ATA WDC WD80EZZX-11C 0A03 PQ: 0 ANSI: 5 [ 1.335246] ata6.00: ATA-9: WDC WD100EFAX-68LHPN0, 83.H0A83, max UDMA/133 [ 1.335252] ata6.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.335271] ata5.00: ATA-9: HGST HDN721010ALE604, 83XN, max UDMA/133 [ 1.335275] ata5.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.339427] ata2.00: ATA-9: HGST HUH721010ALE604, LHAZW2J2, max UDMA/133 [ 1.339432] ata2.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.339448] ata3.00: ATA-9: HGST HUH721010ALE604, LHAZW2J2, max UDMA/133 [ 1.339453] ata3.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.339469] ata4.00: ATA-9: HGST HUH721010ALE604, LHAZW2J2, max UDMA/133 [ 1.339474] ata4.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.344212] ata6.00: configured for UDMA/133 [ 1.344477] ata5.00: configured for UDMA/133 [ 1.357576] ata2.00: configured for UDMA/133 [ 1.357602] ata3.00: configured for UDMA/133 [ 1.357624] ata4.00: configured for UDMA/133 [ 1.357897] scsi 1:0:0:0: Direct-Access ATA HGST HUH721010AL W2J2 PQ: 0 ANSI: 5 [ 1.358735] scsi 2:0:0:0: Direct-Access ATA HGST HUH721010AL W2J2 PQ: 0 ANSI: 5 [ 1.359431] scsi 3:0:0:0: Direct-Access ATA HGST HUH721010AL W2J2 PQ: 0 ANSI: 5 [ 1.359989] scsi 4:0:0:0: Direct-Access ATA HGST HDN721010AL 83XN PQ: 0 ANSI: 5 [ 1.360386] scsi 5:0:0:0: Direct-Access ATA WDC WD100EFAX-68 0A83 PQ: 0 ANSI: 5 [ 1.375025] sd 0:0:0:0: [sda] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 1.375032] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.375056] sd 0:0:0:0: [sda] Write Protect is off [ 1.375062] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.375102] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.375657] sd 5:0:0:0: [sdf] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB) [ 1.375663] sd 5:0:0:0: [sdf] 4096-byte physical blocks [ 1.375670] sd 4:0:0:0: [sde] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB) [ 1.375676] sd 4:0:0:0: [sde] 4096-byte physical blocks [ 1.375687] sd 5:0:0:0: [sdf] Write Protect is off [ 1.375692] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 1.375733] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.375742] sd 3:0:0:0: [sdd] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB) [ 1.375746] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 1.375771] sd 4:0:0:0: [sde] Write Protect is off [ 1.375776] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 1.375816] sd 3:0:0:0: [sdd] Write Protect is off [ 1.375820] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.375822] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.375863] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.377613] sd 2:0:0:0: [sdc] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB) [ 1.377616] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 1.377642] sd 2:0:0:0: [sdc] Write Protect is off [ 1.377648] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.377694] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.428386] usb 1-5: New USB device found, idVendor=413c, idProduct=1005, bcdDevice=59.00 [ 1.428390] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.428393] usb 1-5: Product: Dell Multimedia Pro Keyboard Hub [ 1.428396] usb 1-5: Manufacturer: Dell [ 1.429488] hub 1-5:1.0: USB hub found [ 1.429587] hub 1-5:1.0: 3 ports detected [ 1.436587] sdf: sdf1 [ 1.437387] sd 5:0:0:0: [sdf] Attached SCSI disk [ 1.442034] sdd: sdd1 [ 1.442486] sde: sde1 [ 1.442885] sd 3:0:0:0: [sdd] Attached SCSI disk [ 1.443150] sd 4:0:0:0: [sde] Attached SCSI disk [ 1.444774] sd 1:0:0:0: [sdb] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB) [ 1.444778] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.444838] sd 1:0:0:0: [sdb] Write Protect is off [ 1.444843] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.444911] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.453078] sdc: sdc1 [ 1.453726] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.461126] sda: sda1 [ 1.462290] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.503269] sdb: sdb1 [ 1.504122] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.555647] usb 1-10: new high-speed USB device number 3 using xhci_hcd [ 1.715640] usb 1-10: New USB device found, idVendor=0bda, idProduct=2838, bcdDevice= 1.00 [ 1.715648] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.715653] usb 1-10: Product: RTL2838UHIDIR [ 1.715657] usb 1-10: Manufacturer: Realtek [ 1.715660] usb 1-10: SerialNumber: 00000001 [ 1.755637] tsc: Refined TSC clocksource calibration: 3503.963 MHz [ 1.755651] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3281f0aa83f, max_idle_ns: 440795312089 ns [ 1.755697] clocksource: Switched to clocksource tsc [ 1.783611] usb 1-5.1: new low-speed USB device number 4 using xhci_hcd [ 1.875573] raid6: sse2x4 gen() 13686 MB/s [ 1.889540] usb 1-5.1: New USB device found, idVendor=413c, idProduct=2011, bcdDevice=59.00 [ 1.889542] usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.889543] usb 1-5.1: Product: Dell Multimedia Pro Keyboard [ 1.889544] usb 1-5.1: Manufacturer: Dell [ 1.896186] hidraw: raw HID events driver (C) Jiri Kosina [ 1.903158] usbcore: registered new interface driver usbhid [ 1.903159] usbhid: USB HID core driver [ 1.903848] input: Dell Dell Multimedia Pro Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1:1.0/0003:413C:2011.0001/input/input0 [ 1.943572] raid6: sse2x4 xor() 11601 MB/s [ 1.963673] hid-generic 0003:413C:2011.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell Multimedia Pro Keyboard] on usb-0000:00:14.0-5.1/input0 [ 1.963776] input: Dell Dell Multimedia Pro Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1:1.1/0003:413C:2011.0002/input/input1 [ 1.971575] usb 1-5.2: new full-speed USB device number 5 using xhci_hcd [ 2.011576] raid6: sse2x2 gen() 15970 MB/s [ 2.023621] input: Dell Dell Multimedia Pro Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1:1.1/0003:413C:2011.0002/input/input2 [ 2.023643] hid-generic 0003:413C:2011.0002: input,hidraw1: USB HID v1.10 Device [Dell Dell Multimedia Pro Keyboard] on usb-0000:00:14.0-5.1/input1 [ 2.076673] usb 1-5.2: New USB device found, idVendor=1395, idProduct=0025, bcdDevice= 1.00 [ 2.076675] usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.076676] usb 1-5.2: Product: Sennheiser USB headset [ 2.076677] usb 1-5.2: Manufacturer: Sennheiser Communications [ 2.077804] input: Sennheiser Communications Sennheiser USB headset as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.3/0003:1395:0025.0003/input/input3 [ 2.079573] raid6: sse2x2 xor() 10787 MB/s [ 2.135611] hid-generic 0003:1395:0025.0003: input,hidraw2: USB HID v1.00 Device [Sennheiser Communications Sennheiser USB headset] on usb-0000:00:14.0-5.2/input3 [ 2.147572] raid6: sse2x1 gen() 12852 MB/s [ 2.215575] usb 1-5.3: new low-speed USB device number 6 using xhci_hcd [ 2.215575] raid6: sse2x1 xor() 9553 MB/s [ 2.215576] raid6: using algorithm sse2x2 gen() 15970 MB/s [ 2.215576] raid6: .... xor() 10787 MB/s, rmw enabled [ 2.215577] raid6: using ssse3x2 recovery algorithm [ 2.217131] xor: measuring software checksum speed [ 2.255570] prefetch64-sse: 25000.000 MB/sec [ 2.295570] generic_sse: 22809.000 MB/sec [ 2.295571] xor: using function: prefetch64-sse (25000.000 MB/sec) [ 2.311773] Btrfs loaded, crc32c=crc32c-intel [ 2.380122] usb 1-5.3: New USB device found, idVendor=046d, idProduct=c069, bcdDevice=56.01 [ 2.380126] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.380129] usb 1-5.3: Product: USB Laser Mouse [ 2.380132] usb 1-5.3: Manufacturer: Logitech [ 2.386195] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.3/1-5.3:1.0/0003:046D:C069.0004/input/input4 [ 2.386403] hid-generic 0003:046D:C069.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:14.0-5.3/input0 [ 2.390796] BTRFS: device label archiv devid 1 transid 194993 /dev/sdb1 [ 2.391409] BTRFS: device label archiv devid 3 transid 194993 /dev/sdd1 [ 2.392066] BTRFS: device label archiv devid 4 transid 194993 /dev/sde1 [ 2.392730] BTRFS: device label archiv devid 5 transid 194993 /dev/sdf1 [ 2.393320] BTRFS: device label archiv devid 2 transid 194993 /dev/sdc1 [ 2.393862] BTRFS: device label data devid 1 transid 287842 /dev/sda1 [ 2.393984] BTRFS: device label ssddata devid 1 transid 205550 /dev/nvme0n1p9 [ 2.394093] BTRFS: device label root devid 1 transid 82695 /dev/nvme0n1p4 [ 2.420860] BTRFS info (device nvme0n1p4): disk space caching is enabled [ 2.420863] BTRFS info (device nvme0n1p4): has skinny extents [ 2.425255] BTRFS info (device nvme0n1p4): enabling ssd optimizations [ 2.475278] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 2.546025] systemd[1]: Inserted module 'autofs4' [ 2.591406] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.607789] systemd[1]: Detected architecture x86-64. [ 2.636972] systemd[1]: Set hostname to . [ 2.637538] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 2.717488] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly. [ 2.717935] systemd[1]: /lib/systemd/system/radvd.service:11: PIDFile= references path below legacy directory /var/run/, updating /var/run/radvd.pid → /run/radvd.pid; please update the unit file accordingly. [ 2.718024] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly. [ 2.718478] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly. [ 2.724812] systemd[1]: Listening on fsck to fsckd communication Socket. [ 2.724891] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 2.738764] RPC: Registered named UNIX socket transport module. [ 2.738765] RPC: Registered udp transport module. [ 2.738765] RPC: Registered tcp transport module. [ 2.738766] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.744234] BTRFS info (device nvme0n1p4): disk space caching is enabled [ 2.752432] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 2.760363] nct6775: Found NCT6791D or compatible chip at 0x2e:0x290 [ 2.862796] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5 [ 2.862819] ACPI: Sleep Button [SLPB] [ 2.862863] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6 [ 2.862880] ACPI: Power Button [PWRB] [ 2.862919] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7 [ 2.862950] ACPI: Power Button [PWRF] [ 2.891790] systemd-journald[282]: Received request to flush runtime journal from PID 1 [ 2.913657] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 2.913804] parport_pc 00:01: reported by Plug and Play ACPI [ 2.913881] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE,EPP] [ 2.919153] mc: Linux media interface: v0.10 [ 2.926427] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.926465] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.926500] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.926531] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 2.926703] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 2.926752] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 2.929216] usb 1-10: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state [ 2.974769] EFI Variables Facility v0.08 2004-May-17 [ 2.975107] iTCO_vendor_support: vendor-support=0 [ 2.976089] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 2.976217] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400) [ 2.976315] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 3.028832] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 3.028834] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 3.028835] RAPL PMU: hw unit of domain package 2^-14 Joules [ 3.028835] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 3.028836] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 3.029423] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] WOPCM: 1024K [ 3.029480] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] enable_guc=0 (guc:no submission:no huc:no) [ 3.029535] [drm:intel_pch_type [i915]] Found Kaby Lake PCH (KBP) [ 3.029582] [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 [ 3.029925] usb 1-10: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 3.029927] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) [ 3.029930] usb 1-10: media controller created [ 3.030050] [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M [ 3.030093] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M [ 3.030135] [drm:i915_ggtt_probe_hw [i915]] DSM size = 128M [ 3.030136] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ 3.030138] checking generic (c0000000 500000) vs hw (de000000 1000000) [ 3.030139] checking generic (c0000000 500000) vs hw (c0000000 10000000) [ 3.030140] fb0: switching to inteldrmfb from EFI VGA [ 3.030419] pstore: Using crash dump compression: deflate [ 3.030429] pstore: Registered efi as persistent store backend [ 3.033979] Console: switching to colour dummy device 80x25 [ 3.034015] i915 0000:00:02.0: vgaarb: deactivate vga console [ 3.034101] [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8ff00047 [ 3.034146] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 131072K, usable: 130048K [ 3.034495] [drm:intel_gt_init_workarounds [i915]] Initialized 5 GT workarounds on global [ 3.034568] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x86e93018 [ 3.034616] [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 [ 3.034655] [drm:intel_opregion_setup [i915]] Public ACPI methods supported [ 3.034693] [drm:intel_opregion_setup [i915]] SWSCI supported [ 3.035243] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 [ 3.035288] [drm:intel_opregion_setup [i915]] ASLE supported [ 3.035331] [drm:intel_opregion_setup [i915]] ASLE extension supported [ 3.035374] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 3.035411] [drm:i915_driver_probe [i915]] DRAM type: DDR4 [ 3.035447] [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 16 GB, width: X8, ranks: 2, 16Gb DIMMs: no [ 3.035481] [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 GB, width: X0, ranks: 0, 16Gb DIMMs: no [ 3.035516] [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb DIMMs: no [ 3.035551] [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 16 GB, width: X8, ranks: 2, 16Gb DIMMs: no [ 3.035582] [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 GB, width: X0, ranks: 0, 16Gb DIMMs: no [ 3.035623] [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb DIMMs: no [ 3.035652] [drm:i915_driver_probe [i915]] Memory configuration is symmetric? yes [ 3.035683] [drm:i915_driver_probe [i915]] DRAM bandwidth: 38400000 kBps, channels: 2 [ 3.035711] [drm:i915_driver_probe [i915]] DRAM ranks: 2, 16Gb DIMMs: no [ 3.035723] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.035723] [drm] Driver supports precise vblank timestamp query. [ 3.035762] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz [ 3.035801] [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 209 [ 3.035842] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 [ 3.035883] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 [ 3.035930] [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 [ 3.035976] [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 [ 3.036021] [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 [ 3.036068] [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 [ 3.036383] [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) [ 3.036430] [drm:intel_bios_init [i915]] Panel type: 2 (VBT) [ 3.036477] [drm:intel_bios_init [i915]] DRRS supported mode is static [ 3.036523] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables: [ 3.036541] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 3.036588] [drm:intel_bios_init [i915]] VBT initial LVDS value 300 [ 3.036636] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 [ 3.036682] [drm:intel_bios_init [i915]] DRRS State Enabled:1 [ 3.036729] [drm:intel_bios_init [i915]] Skipping SDVO device mapping [ 3.036769] [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 LSPCON:0 USB-Type-C:0 TBT:0 [ 3.036809] [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0 [ 3.036850] [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 [ 3.036891] [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 8 [ 3.036933] [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 [ 3.036973] [drm:intel_bios_init [i915]] VBT HDMI level shift for port D: 8 [ 3.037015] [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 [ 3.037057] [drm:intel_bios_init [i915]] port E trying to use the same AUX CH (0x40) as port A, disabling port E DP support [ 3.037100] [drm:intel_bios_init [i915]] VBT HDMI level shift for port E: 0 [ 3.037165] [drm:intel_dsm_detect [i915]] no _DSM method for intel device [ 3.037211] [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz [ 3.037257] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00 [ 3.037304] [drm:intel_power_well_enable [i915]] enabling power well 1 [ 3.037353] [drm:intel_power_well_enable [i915]] enabling MISC IO power well [ 3.037402] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 675000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 3 [ 3.037450] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz [ 3.037497] [drm:intel_cdclk_init [i915]] Max dotclock rate: 675000 kHz [ 3.037553] [drm:intel_power_well_enable [i915]] enabling always-on [ 3.037598] [drm:intel_power_well_enable [i915]] enabling DC off [ 3.037644] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00 [ 3.037693] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 3.037697] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.037745] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 3.037791] [drm:intel_power_well_enable [i915]] enabling DDI B IO power well [ 3.037837] [drm:intel_power_well_enable [i915]] enabling DDI C IO power well [ 3.037884] [drm:intel_power_well_enable [i915]] enabling DDI D IO power well [ 3.037928] [drm:intel_csr_ucode_init [i915]] Loading i915/kbl_dmc_ver1_04.bin [ 3.038201] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 [ 3.038322] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) [ 3.038358] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) [ 3.038392] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) [ 3.038424] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) [ 3.038455] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) [ 3.038486] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) [ 3.038518] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) [ 3.038547] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) [ 3.038873] [drm:intel_modeset_init [i915]] 3 display pipes available. [ 3.039028] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 675000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 3 [ 3.039435] [drm:intel_bios_port_aux_ch [i915]] using AUX A for port A (VBT) [ 3.039479] [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A] [ 3.039559] [drm:intel_pps_dump_state [i915]] cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 0 [ 3.039594] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 3.039632] [drm:intel_dp_init_panel_power_sequencer [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 [ 3.039664] [drm:intel_dp_init_panel_power_sequencer [i915]] backlight on delay 1, off delay 200 [ 3.039744] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 3.039784] [drm:intel_edp_panel_vdd_sanitize [i915]] VDD left on by BIOS, adjusting state tracking [ 3.040099] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 3.042022] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 82 01 00 03 01 81 00 00 00 00 00 00 00 [ 3.043122] [drm:drm_dp_read_desc [drm_kms_helper]] DP branch: OUI 00-e0-4c dev-ID HW-rev 0.0 SW-rev 1.0 quirks 0x0000 [ 3.044444] i2c i2c-1: Added multiplexed i2c bus 5 [ 3.044446] rtl2832 1-0010: Realtek RTL2832 successfully attached [ 3.044465] usb 1-10: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))... [ 3.044468] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered. [ 3.044697] cryptd: max_cpu_qlen set to 1000 [ 3.047118] SSE version of gcm_enc/dec engaged. [ 3.049001] [drm:intel_dp_init_connector [i915]] eDP DPCD: 00 00 00 [ 3.049775] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 3.058011] r820t 5-001a: creating new instance [ 3.061326] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 3.061341] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 3.061368] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 3.061422] [drm:intel_panel_edid_fixed_mode [i915]] [CONNECTOR:95:eDP-1] using preferred mode from EDID: [ 3.061438] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 3.061485] [drm:intel_dp_init_connector [i915]] VBT doesn't support DRRS [ 3.061550] [drm:get_backlight_max_vbt [i915]] VBT defined backlight frequency 200 Hz [ 3.061597] [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, disabled, brightness 0/7500 [ 3.061656] [drm:intel_bios_port_aux_ch [i915]] using AUX C for port C (platform default) [ 3.061696] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:100:DDI C] [ 3.061738] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT) [ 3.061793] [drm:intel_bios_port_aux_ch [i915]] using AUX D for port D (platform default) [ 3.061833] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:108:DDI D] [ 3.061871] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x6 for port D (VBT) [ 3.061930] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: enabled [ 3.061973] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled [ 3.062015] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled [ 3.062056] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: enabled, pipe A [ 3.062095] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A [ 3.062134] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A [ 3.062173] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B [ 3.062210] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B [ 3.062247] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B [ 3.062283] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C [ 3.062319] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C [ 3.062355] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C [ 3.062393] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 hw state readout: crtc_mask 0x00000000, on 1 [ 3.062430] [drm:intel_modeset_setup_hw_state [i915]] DPLL 1 hw state readout: crtc_mask 0x00000001, on 1 [ 3.062467] [drm:intel_modeset_setup_hw_state [i915]] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 3.062503] [drm:intel_modeset_setup_hw_state [i915]] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0 [ 3.062539] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI A] hw state readout: disabled, pipe A [ 3.062575] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:100:DDI C] hw state readout: disabled, pipe A [ 3.062611] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI D] hw state readout: disabled, pipe A [ 3.062644] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:eDP-1] hw state readout: disabled [ 3.062680] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:101:HDMI-A-1] hw state readout: disabled [ 3.062716] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:HDMI-A-2] hw state readout: disabled [ 3.062735] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [MODE:1280x1024] for [CRTC:51:pipe A] state 0000000097006389 [ 3.062750] [drm:drm_calc_timestamping_constants [drm]] *ERROR* crtc 51: Can't calculate constants, dotclock = 0! [ 3.062791] [drm:intel_modeset_setup_hw_state [i915]] pipe A data rate 0 num active planes 1 [ 3.062828] [drm:intel_modeset_setup_hw_state [i915]] pipe B data rate 0 num active planes 0 [ 3.062864] [drm:intel_modeset_setup_hw_state [i915]] pipe C data rate 0 num active planes 0 [ 3.062881] ------------[ cut here ]------------ [ 3.062898] WARNING: CPU: 0 PID: 333 at drivers/gpu/drm/drm_vblank.c:650 drm_calc_vbltimestamp_from_scanoutpos+0x2e9/0x320 [drm] [ 3.062899] Modules linked in: r820t(E) snd_pcsp(E) aesni_intel(E+) glue_helper(E) crypto_simd(E) rtl2832(E) i2c_mux(E) snd_pcm(E) cryptd(E) intel_cstate(E) snd_timer(E) intel_uncore(E) snd(E) efi_pstore(E) intel_rapl_perf(E) soundcore(E) iTCO_wdt(E) efivars(E) iTCO_vendor_support(E) i915(E+) dvb_usb_rtl28xxu(E+) dvb_usb_v2(E) sg(E) i2c_algo_bit(E) joydev(E) dvb_core(E) evdev(E) mc(E) drm_kms_helper(E) rc_core(E) mei_me(E) parport_pc(E) drm(E) mei(E) parport(E) video(E) acpi_pad(E) button(E) nct6775(E) hwmon_vid(E) coretemp(E) nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) efivarfs(E) ip_tables(E) x_tables(E) autofs4(E) btrfs(E) libcrc32c(E) crc32c_generic(E) xor(E) zstd_decompress(E) zstd_compress(E) hid_generic(E) usbhid(E) hid(E) raid6_pq(E) sd_mod(E) xhci_pci(E) crc32c_intel(E) ahci(E) libahci(E) xhci_hcd(E) e1000e(E) nvme(E) libata(E) i2c_i801(E) nvme_core(E) scsi_mod(E) usbcore(E) [ 3.062936] CPU: 0 PID: 333 Comm: systemd-udevd Tainted: G E 5.4.0-rc2+ #1 [ 3.062937] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B250M-HDV, BIOS P2.50 02/23/2018 [ 3.062952] RIP: 0010:drm_calc_vbltimestamp_from_scanoutpos+0x2e9/0x320 [drm] [ 3.062954] Code: 43 20 8b 80 70 01 00 00 23 43 50 a8 10 75 1b 48 8b 83 28 03 00 00 48 85 c0 0f 84 5e fd ff ff 48 83 78 28 00 0f 84 53 fd ff ff <0f> 0b e9 4f fd ff ff 48 c7 c7 e8 a9 9f c0 e8 24 e9 ff ff e9 3e fd [ 3.062955] RSP: 0018:ffff9f240056b800 EFLAGS: 00010002 [ 3.062956] RAX: 000000000000003b RBX: ffff919845210000 RCX: 0000000000000000 [ 3.062957] RDX: 0000000000000000 RSI: ffffffffc09faa20 RDI: 0000000000000001 [ 3.062958] RBP: ffff9f240056b860 R08: 0000000000000000 R09: ffffffffc09cde80 [ 3.062958] R10: 0000000000000000 R11: ffffffffc0bc2450 R12: 0000000000000000 [ 3.062959] R13: 0000000000000000 R14: ffff919846f84080 R15: ffff9f240056b874 [ 3.062960] FS: 00007f47c2034d40(0000) GS:ffff91984dc00000(0000) knlGS:0000000000000000 [ 3.062961] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.062962] CR2: 00007f827b5112e0 CR3: 00000008486b6006 CR4: 00000000003606f0 [ 3.062963] Call Trace: [ 3.062980] drm_get_last_vbltimestamp+0x4d/0x80 [drm] [ 3.062994] drm_reset_vblank_timestamp+0x59/0xd0 [drm] [ 3.063008] drm_crtc_vblank_on+0x77/0xd0 [drm] [ 3.063050] intel_modeset_setup_hw_state+0x888/0x1370 [i915] [ 3.063092] intel_modeset_init+0x89b/0x1d40 [i915] [ 3.063132] ? fwtable_write32+0x48/0x250 [i915] [ 3.063169] ? intel_irq_postinstall+0x439/0x630 [i915] [ 3.063202] i915_driver_probe+0x5b8/0x13e0 [i915] [ 3.063206] ? rpm_resume+0x247/0x760 [ 3.063242] i915_pci_probe+0x54/0x160 [i915] [ 3.063245] local_pci_probe+0x42/0x80 [ 3.063248] pci_device_probe+0xfc/0x1b0 [ 3.063250] really_probe+0x1c2/0x3e0 [ 3.063252] driver_probe_device+0xb4/0x100 [ 3.063254] device_driver_attach+0x4f/0x60 [ 3.063255] __driver_attach+0x86/0x140 [ 3.063256] ? device_driver_attach+0x60/0x60 [ 3.063258] bus_for_each_dev+0x77/0xc0 [ 3.063260] ? klist_add_tail+0x3b/0x70 [ 3.063262] bus_add_driver+0x14d/0x1f0 [ 3.063264] ? 0xffffffffc0da3000 [ 3.063265] driver_register+0x6b/0xb0 [ 3.063266] ? 0xffffffffc0da3000 [ 3.063269] do_one_initcall+0x46/0x1f4 [ 3.063271] ? _cond_resched+0x15/0x30 [ 3.063274] ? kmem_cache_alloc_trace+0x155/0x220 [ 3.063276] do_init_module+0x5a/0x220 [ 3.063278] load_module+0x222d/0x24a0 [ 3.063281] ? __do_sys_finit_module+0xa8/0x110 [ 3.063282] __do_sys_finit_module+0xa8/0x110 [ 3.063284] do_syscall_64+0x52/0x160 [ 3.063286] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3.063287] RIP: 0033:0x7f47c281bf59 [ 3.063290] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 07 6f 0c 00 f7 d8 64 89 01 48 [ 3.063290] RSP: 002b:00007ffefd5593f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 3.063292] RAX: ffffffffffffffda RBX: 000055a9caf39d10 RCX: 00007f47c281bf59 [ 3.063293] RDX: 0000000000000000 RSI: 00007f47c2720cad RDI: 0000000000000011 [ 3.063293] RBP: 00007f47c2720cad R08: 0000000000000000 R09: 0000000000000000 [ 3.063294] R10: 0000000000000011 R11: 0000000000000246 R12: 0000000000000000 [ 3.063295] R13: 000055a9caf54a50 R14: 0000000000020000 R15: 000055a9caf39d10 [ 3.063296] ---[ end trace 4ae6c77b8f555984 ]--- [ 3.063347] [drm:intel_plane_disable_noatomic [i915]] Disabling [PLANE:31:plane 1A] on [CRTC:51:pipe A] [ 3.063367] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000325e64b7 [ 3.063384] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 000000007cd83495 state to 00000000325e64b7 [ 3.063399] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 00000000325e64b7 [ 3.063447] [drm:intel_disable_pipe [i915]] disabling pipe A [ 3.064289] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000325e64b7 [ 3.064306] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000325e64b7 [ 3.064357] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state adjusted, was enabled, now disabled [ 3.064372] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:51:pipe A] state 0000000097006389 [ 3.064419] [drm:intel_disable_shared_dpll [i915]] disable DPLL 1 (active 1, on? 1) for crtc 51 [ 3.064463] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 1 [ 3.064510] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] [ 3.064553] [drm:intel_dump_pipe_config [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] [ 3.064594] [drm:intel_dump_pipe_config [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] [ 3.064636] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 enabled but not in use, disabling [ 3.064674] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000325e64b7 [ 3.064691] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 00000000f53bdbfd state to 00000000325e64b7 [ 3.064707] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 000000007cd83495 state to 00000000325e64b7 [ 3.064723] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 000000004f49daf4 state to 00000000325e64b7 [ 3.064739] [drm:drm_atomic_check_only [drm]] checking 00000000325e64b7 [ 3.064788] [drm:intel_atomic_setup_scalers [i915]] Attached scaler id 0.0 to CRTC:51 [ 3.064806] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 000000007c73a331 state to 00000000325e64b7 [ 3.064822] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 0000000064244e26 state to 00000000325e64b7 [ 3.064837] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 00000000ed0b22fa state to 00000000325e64b7 [ 3.064852] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 0000000088bcb495 state to 00000000325e64b7 [ 3.064866] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 0000000060f715ef state to 00000000325e64b7 [ 3.064881] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 000000006dabdd8d state to 00000000325e64b7 [ 3.064896] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 0000000084132f79 state to 00000000325e64b7 [ 3.064910] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000b1fece1a state to 00000000325e64b7 [ 3.064950] [drm:skl_compute_wm [i915]] [PLANE:39:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm [ 3.064989] [drm:skl_compute_wm [i915]] [PLANE:39:plane 2A] lines 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065024] [drm:skl_compute_wm [i915]] [PLANE:39:plane 2A] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065058] [drm:skl_compute_wm [i915]] [PLANE:39:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065092] [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm [ 3.065125] [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] lines 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065157] [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065190] [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065221] [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm [ 3.065251] [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] lines 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065281] [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065310] [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065341] [drm:skl_compute_wm [i915]] [PLANE:60:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm [ 3.065372] [drm:skl_compute_wm [i915]] [PLANE:60:plane 2B] lines 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065403] [drm:skl_compute_wm [i915]] [PLANE:60:plane 2B] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065435] [drm:skl_compute_wm [i915]] [PLANE:60:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065466] [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm [ 3.065497] [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] lines 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065527] [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065558] [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065588] [drm:skl_compute_wm [i915]] [PLANE:73:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm [ 3.065619] [drm:skl_compute_wm [i915]] [PLANE:73:plane 1C] lines 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065651] [drm:skl_compute_wm [i915]] [PLANE:73:plane 1C] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065681] [drm:skl_compute_wm [i915]] [PLANE:73:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065711] [drm:skl_compute_wm [i915]] [PLANE:81:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm [ 3.065742] [drm:skl_compute_wm [i915]] [PLANE:81:plane 2C] lines 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065772] [drm:skl_compute_wm [i915]] [PLANE:81:plane 2C] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065802] [drm:skl_compute_wm [i915]] [PLANE:81:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065833] [drm:skl_compute_wm [i915]] [PLANE:89:cursor C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm [ 3.065863] [drm:skl_compute_wm [i915]] [PLANE:89:cursor C] lines 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065893] [drm:skl_compute_wm [i915]] [PLANE:89:cursor C] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065924] [drm:skl_compute_wm [i915]] [PLANE:89:cursor C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0 [ 3.065942] [drm:drm_atomic_commit [drm]] committing 00000000325e64b7 [ 3.065993] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000325e64b7 [ 3.066008] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000325e64b7 [ 3.066381] [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, 100000000] [ 3.066442] [drm:intel_engine_init_workarounds [i915]] Initialized 5 engine workarounds on rcs'0 [ 3.066477] [drm:intel_engine_init_whitelist [i915]] Initialized 5 whitelist workarounds on rcs'0 [ 3.066512] [drm:intel_engine_init_ctx_wa [i915]] Initialized 14 context workarounds on rcs'0 [ 3.066550] [drm:intel_engine_init_workarounds [i915]] Initialized 1 engine workarounds on bcs'0 [ 3.066584] [drm:intel_engine_init_workarounds [i915]] Initialized 1 engine workarounds on vcs'0 [ 3.066618] [drm:intel_engine_init_workarounds [i915]] Initialized 1 engine workarounds on vecs'0 [ 3.066658] [drm:i915_gem_init_contexts [i915]] logical context support initialized [ 3.067245] [drm:intel_fbdev_init [i915]] pipe A not active or no fb, skipping [ 3.067277] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping [ 3.067312] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping [ 3.067344] [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config [ 3.067855] [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 [ 3.067886] [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 [ 3.067918] [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 [ 3.067948] [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 [ 3.073719] r820t 5-001a: Rafael Micro r820t successfully identified [ 3.080194] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered [ 3.080243] [drm:intel_dp_connector_register [i915]] registering DPDDC-A bus for card0-eDP-1 [ 3.080369] [drm] Initialized i915 1.6.0 20191007 for 0000:00:02.0 on minor 0 [ 3.080472] [drm:intel_opregion_resume [i915]] 3 outputs detected [ 3.082696] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.083008] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9 [ 3.083402] [drm:intel_power_well_disable [i915]] disabling DDI D IO power well [ 3.083419] [drm:drm_client_modeset_probe [drm]] [ 3.083464] [drm:intel_power_well_disable [i915]] disabling DDI C IO power well [ 3.083473] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 3.083513] [drm:intel_power_well_disable [i915]] disabling DDI B IO power well [ 3.083559] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 3.083598] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 3.083641] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 3.084359] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 3.084404] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 3.084406] i915 device info: pciid=0x5902 rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 [ 3.084407] i915 device info: is_mobile: no [ 3.084408] i915 device info: is_lp: no [ 3.084447] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 3.084448] i915 device info: require_force_probe: no [ 3.084487] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 3.084488] i915 device info: has_64bit_reloc: yes [ 3.084489] i915 device info: gpu_reset_clobbers_display: no [ 3.084490] i915 device info: has_reset_engine: yes [ 3.084491] i915 device info: has_fpga_dbg: yes [ 3.084491] i915 device info: has_global_mocs: no [ 3.084492] i915 device info: has_gt_uc: yes [ 3.084493] i915 device info: has_l3_dpf: no [ 3.084493] i915 device info: has_llc: yes [ 3.084494] i915 device info: has_logical_ring_contexts: yes [ 3.084495] i915 device info: has_logical_ring_elsq: no [ 3.084496] i915 device info: has_logical_ring_preemption: yes [ 3.084496] i915 device info: has_pooled_eu: no [ 3.084497] i915 device info: has_rc6: yes [ 3.084498] i915 device info: has_rc6p: no [ 3.084499] i915 device info: has_rps: yes [ 3.084499] i915 device info: has_runtime_pm: yes [ 3.084500] i915 device info: has_snoop: no [ 3.084501] i915 device info: has_coherent_ggtt: yes [ 3.084501] i915 device info: unfenced_needs_alignment: no [ 3.084502] i915 device info: hws_needs_physical: no [ 3.084503] i915 device info: cursor_needs_physical: no [ 3.084504] i915 device info: has_csr: yes [ 3.084504] i915 device info: has_ddi: yes [ 3.084505] i915 device info: has_dp_mst: yes [ 3.084506] i915 device info: has_dsb: no [ 3.084506] i915 device info: has_fbc: yes [ 3.084507] i915 device info: has_gmch: no [ 3.084508] i915 device info: has_hotplug: yes [ 3.084509] i915 device info: has_ipc: yes [ 3.084509] i915 device info: has_modular_fia: no [ 3.084510] i915 device info: has_overlay: no [ 3.084511] i915 device info: has_psr: yes [ 3.084512] i915 device info: overlay_needs_physical: no [ 3.084512] i915 device info: supports_tv: no [ 3.084513] i915 device info: slice total: 1, mask=0001 [ 3.084514] i915 device info: subslice total: 2 [ 3.084516] i915 device info: slice0: 2 subslices, mask=00000003 [ 3.084517] i915 device info: slice1: 0 subslices, mask=00000000 [ 3.084517] i915 device info: slice2: 0 subslices, mask=00000000 [ 3.084518] i915 device info: EU total: 12 [ 3.084519] i915 device info: EU per subslice: 6 [ 3.084520] i915 device info: has slice power gating: no [ 3.084520] i915 device info: has subslice power gating: no [ 3.084521] i915 device info: has EU power gating: yes [ 3.084522] i915 device info: CS timestamp frequency: 12000 kHz [ 3.086261] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] status updated from unknown to connected [ 3.086282] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 3.086301] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 3.086315] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 3.086432] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 3.086446] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 3.086460] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 3.086473] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 3.086486] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 3.086500] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 3.086512] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 3.086525] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 3.086538] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 3.086551] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 3.086564] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 3.086577] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 3.086590] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 3.086603] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 3.086615] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 3.086627] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 3.086640] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 3.086648] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 3.086701] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 3.086963] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 3.087005] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 3.087239] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 3.087269] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 3.087308] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 3.087346] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 3.090773] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 3.090825] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 3.096520] videodev: Linux video capture interface: v2.00 [ 3.096755] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 3.096808] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 3.097091] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 3.097117] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 3.097125] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] status updated from unknown to disconnected [ 3.097133] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 3.097141] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 3.097184] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 3.098417] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 3.098469] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 3.098710] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 3.098744] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 3.098786] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 3.098824] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 3.102229] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 3.102281] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 3.102756] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 3.102803] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 3.104838] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 3.104872] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 3.104881] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] status updated from unknown to disconnected [ 3.104887] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 3.104904] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 3.104917] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 3.104930] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 3.104945] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 3.104957] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 3.104968] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 3.104980] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 3.104992] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 16384x16384 config [ 3.105005] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 3.105057] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one [ 3.105369] [drm:intelfb_create [i915]] allocated 1280x1024 fb: 0x00040000 [ 3.105457] fbcon: i915drmfb (fb0) is primary device [ 3.105520] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000006b404dfd [ 3.105537] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 0000000072d60733 state to 000000006b404dfd [ 3.105552] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000f914c057 state to 000000006b404dfd [ 3.105565] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000f914c057 [ 3.105580] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 0000000021e4292e state to 000000006b404dfd [ 3.105598] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 0000000021e4292e [ 3.105613] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 00000000eaa2fa6c state to 000000006b404dfd [ 3.105628] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 0000000093b2af68 state to 000000006b404dfd [ 3.105640] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 0000000093b2af68 [ 3.105655] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 0000000072cb14a3 state to 000000006b404dfd [ 3.105668] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 0000000072cb14a3 [ 3.105682] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 000000002af1d448 state to 000000006b404dfd [ 3.105697] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 000000006c8cc31c state to 000000006b404dfd [ 3.105709] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 000000006c8cc31c [ 3.105724] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 0000000090242716 state to 000000006b404dfd [ 3.105736] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 0000000090242716 [ 3.105751] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 00000000b7272811 state to 000000006b404dfd [ 3.105765] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [MODE:1280x1024] for [CRTC:51:pipe A] state 00000000b7272811 [ 3.105777] [drm:drm_atomic_set_crtc_for_plane [drm]] Link [PLANE:31:plane 1A] state 0000000072d60733 to [CRTC:51:pipe A] [ 3.105789] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 0000000072d60733 [ 3.105803] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000006b404dfd [ 3.105819] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 00000000a7e65528 state to 000000006b404dfd [ 3.105831] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000a7e65528 to [CRTC:51:pipe A] [ 3.105846] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 0000000011bb5b31 state to 000000006b404dfd [ 3.105859] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 0000000011bb5b31 [ 3.105870] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 00000000eaa2fa6c [ 3.105884] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000006b404dfd [ 3.105900] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 000000005b06715e state to 000000006b404dfd [ 3.105913] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 000000005b06715e [ 3.105924] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 000000002af1d448 [ 3.105939] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000006b404dfd [ 3.105954] [drm:drm_atomic_check_only [drm]] checking 000000006b404dfd [ 3.105964] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] mode changed [ 3.105970] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] enable changed [ 3.105977] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] active changed [ 3.105985] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 3.105993] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] using [ENCODER:94:DDI A] on [CRTC:51:pipe A] [ 3.106001] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 3.106015] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000006b404dfd [ 3.106030] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 000000006b404dfd [ 3.106083] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 3.106139] [drm:skl_update_scaler [i915]] scaler_user index 0.31: Staged freeing scaler id 0 scaler_users = 0x0 [ 3.106182] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max rate 270000 max bpp 24 pixel clock 108000KHz [ 3.106223] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 3.106262] [drm:intel_dp_compute_config [i915]] DP lane count 2 clock 270000 bpp 24 [ 3.106299] [drm:intel_dp_compute_config [i915]] DP link rate required 324000 available 540000 [ 3.106350] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 24, dithering: 0 [ 3.106393] [drm:pipe_config_mismatch [i915]] fastset mismatch in cpu_transcoder (expected 0, found 4) [ 3.106435] [drm:pipe_config_mismatch [i915]] fastset mismatch in lane_count (expected 0, found 2) [ 3.106478] [drm:pipe_config_mismatch [i915]] fastset mismatch in dp_m_n (expected tu 0 gmch 0/0 link 0/0, or tu 0 gmch 0/0 link 0/0, found tu 64, gmch 5033164/8388608 link 209715/524288) [ 3.106518] [drm:pipe_config_mismatch [i915]] fastset mismatch in output_types (expected 0x00000000, found 0x00000100) [ 3.106559] [drm:pipe_config_mismatch [i915]] fastset mismatch in base.adjusted_mode.flags (1) (expected 0, found 1) [ 3.106598] [drm:pipe_config_mismatch [i915]] fastset mismatch in base.adjusted_mode.flags (4) (expected 0, found 4) [ 3.106638] [drm:pipe_config_mismatch [i915]] fastset mismatch in pipe_bpp (expected 0, found 24) [ 3.106673] [drm:pipe_config_mismatch [i915]] fastset mismatch in base.adjusted_mode.crtc_clock (expected 0, found 108000) [ 3.106710] [drm:pipe_config_mismatch [i915]] fastset mismatch in port_clock (expected 0, found 270000) [ 3.106753] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 3.106792] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 3.106839] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 0 -> 1, off 0, on 1, ms 1 [ 3.106882] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 3.106922] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 3.106971] [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 860), size 0 -> 860 [ 3.107007] [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 0 - 0) -> ( 860 - 892), size 0 -> 32 [ 3.107042] [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm [ 3.107076] [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 2, 3, 3, 5, 6, 6, 7, 0 [ 3.107109] [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 22, 29, 33, 57, 68, 68, 79, 0 [ 3.107142] [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 23, 30, 34, 58, 69, 69, 80, 0 [ 3.107189] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 3.107234] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 3.107272] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 [ 3.107311] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64 [ 3.107350] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 3.107390] [drm:intel_dump_pipe_config [i915]] requested mode: [ 3.107405] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 3.107444] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 3.107459] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 3.107498] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 3.107537] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 3.107574] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 3.107643] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 3.107681] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 3.107718] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 3.107756] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 3.107794] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 3.107831] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 3.107868] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 3.107907] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 3.107943] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 3.107962] [drm:drm_atomic_commit [drm]] committing 000000006b404dfd [ 3.108840] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 [ 3.108907] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 3.108908] rtl2832_sdr rtl2832_sdr.0.auto: Registered as swradio0 [ 3.108950] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 3.108950] rtl2832_sdr rtl2832_sdr.0.auto: Realtek RTL2832 SDR attached [ 3.108993] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 3.108993] rtl2832_sdr rtl2832_sdr.0.auto: SDR API is still slightly experimental and functionality changes may follow [ 3.109034] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 3.109077] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 3.109117] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 3.109157] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 3.109203] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 3.109245] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 3.109296] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 3.109341] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 3.115616] Registered IR keymap rc-empty [ 3.115640] rc rc0: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb1/1-10/rc/rc0 [ 3.115669] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb1/1-10/rc/rc0/input10 [ 3.115713] rc rc0: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 0, raw IR receiver, no transmitter [ 3.118669] usb 1-10: dvb_usb_v2: schedule remote query interval to 200 msecs [ 3.126573] usb 1-10: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ 3.126624] usbcore: registered new interface driver dvb_usb_rtl28xxu [ 3.167467] ppdev: user-space parallel port driver [ 3.182319] BTRFS info (device sda1): disk space caching is enabled [ 3.182320] BTRFS info (device sda1): has skinny extents [ 3.182457] BTRFS info (device nvme0n1p9): disk space caching is enabled [ 3.182459] BTRFS info (device nvme0n1p9): has skinny extents [ 3.242078] EXT4-fs (nvme0n1p8): mounted filesystem with ordered data mode. Opts: (null) [ 3.245225] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null) [ 3.249589] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null) [ 3.258007] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.282508] BTRFS info (device nvme0n1p9): enabling ssd optimizations [ 3.290245] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 3.349569] intel_rapl_common: Found RAPL domain package [ 3.349571] intel_rapl_common: Found RAPL domain core [ 3.349572] intel_rapl_common: Found RAPL domain uncore [ 3.349572] intel_rapl_common: Found RAPL domain dram [ 3.675819] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000008 [ 3.675971] [drm:wait_panel_status [i915]] Wait complete [ 3.676132] [drm:edp_panel_on [i915]] Wait for panel power on [ 3.676316] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 0000000b [ 3.878524] [drm:wait_panel_status [i915]] Wait complete [ 3.878676] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 3.879885] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a [ 3.880941] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 3.881051] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 3.881154] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 3.881258] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 3.882903] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 3.883002] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 3.883101] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 3.884635] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 3.884658] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 3.884680] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 3.886174] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 3.886197] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 3.886219] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 3.887719] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 3.887743] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 270000, lane count = 2 [ 3.887772] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 3.888250] [drm:intel_enable_pipe [i915]] enabling pipe A [ 3.888289] [drm:intel_edp_backlight_on [i915]] [ 3.888315] [drm:intel_panel_enable_backlight [i915]] pipe A [ 3.888419] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 3.888504] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 3.888533] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 3.888559] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 3.905141] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 3.905184] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 3.905229] [drm:intel_ddi_get_config [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp [ 3.905269] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 3.905304] [drm:intel_enable_sagv [i915]] Enabling SAGV [ 3.905333] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000006b404dfd [ 3.905350] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000006b404dfd [ 3.905396] Console: switching to colour frame buffer device 160x64 [ 3.905422] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000004f90efc1 [ 3.905438] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 00000000bc9e3644 state to 000000004f90efc1 [ 3.905453] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 000000008184b530 state to 000000004f90efc1 [ 3.905465] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000bc9117b6 state to 000000004f90efc1 [ 3.905476] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000bc9117b6 [ 3.905490] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000a1c0202a state to 000000004f90efc1 [ 3.905502] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000a1c0202a [ 3.905514] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 00000000d319272b state to 000000004f90efc1 [ 3.905525] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 00000000cc0673bd state to 000000004f90efc1 [ 3.905534] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 00000000cc0673bd [ 3.905546] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 00000000e56bdf92 state to 000000004f90efc1 [ 3.905555] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 00000000e56bdf92 [ 3.905566] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 00000000e119794f state to 000000004f90efc1 [ 3.905578] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 00000000be0b3b7f state to 000000004f90efc1 [ 3.905587] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 00000000be0b3b7f [ 3.905598] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000ab10554d state to 000000004f90efc1 [ 3.905606] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 00000000ab10554d [ 3.905616] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 00000000bc9e3644 [ 3.905627] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000004f90efc1 [ 3.905640] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 000000008024c32b state to 000000004f90efc1 [ 3.905649] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000008024c32b to [NOCRTC] [ 3.905658] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000008024c32b to [CRTC:51:pipe A] [ 3.905669] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 00000000da4edb59 state to 000000004f90efc1 [ 3.905678] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 00000000da4edb59 [ 3.905686] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 00000000d319272b [ 3.905698] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000004f90efc1 [ 3.905710] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 00000000cab2f085 state to 000000004f90efc1 [ 3.905718] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 00000000cab2f085 [ 3.905727] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 00000000e119794f [ 3.905738] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000004f90efc1 [ 3.905749] [drm:drm_atomic_check_only [drm]] checking 000000004f90efc1 [ 3.905759] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 3.905765] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 3.905771] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 3.905783] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000004f90efc1 [ 3.905794] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 000000004f90efc1 [ 3.905843] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 3.905890] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max rate 162000 max bpp 24 pixel clock 108000KHz [ 3.905924] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 3.905956] [drm:intel_dp_compute_config [i915]] DP lane count 2 clock 162000 bpp 24 [ 3.905987] [drm:intel_dp_compute_config [i915]] DP link rate required 324000 available 324000 [ 3.906030] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 24, dithering: 0 [ 3.906067] [drm:pipe_config_mismatch [i915]] fastset mismatch in dp_m_n (expected tu 64 gmch 5033164/8388608 link 209715/524288, or tu 0 gmch 0/0 link 0/0, found tu 64, gmch 4194304/4194304 link 174762/262144) [ 3.906103] [drm:pipe_config_mismatch [i915]] fastset mismatch in port_clock (expected 270000, found 162000) [ 3.906139] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 3.906173] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 3.906211] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 3.906247] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 3.906280] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 3.906321] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 3.906355] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 3.906387] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 [ 3.906419] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 4194304, gmch_n: 4194304, link_m: 174762, link_n: 262144, tu: 64 [ 3.906449] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 3.906480] [drm:intel_dump_pipe_config [i915]] requested mode: [ 3.906493] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 3.906523] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 3.906534] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 3.906566] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 3.906596] [drm:intel_dump_pipe_config [i915]] port clock: 162000, pipe src size: 1280x1024, pixel rate 108000 [ 3.906625] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 3.906655] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 3.906685] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 3.906715] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x5, cfgcr1: 0x0, cfgcr2: 0x0 [ 3.906744] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 3.906774] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 3.906803] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 3.906833] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 3.906862] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 3.906890] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 3.906903] [drm:drm_atomic_commit [drm]] committing 000000004f90efc1 [ 3.906975] [drm:intel_edp_backlight_off [i915]] [ 4.111904] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 4.112115] [drm:intel_disable_pipe [i915]] disabling pipe A [ 4.122942] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 4.123104] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 4.123287] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000002 control 00000000 [ 4.174513] [drm:wait_panel_status [i915]] Wait complete [ 4.174661] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 4.174802] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 4.174930] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 4.175051] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 4.175190] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 4.175314] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 4.175435] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 4.175557] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 4.175677] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 4.175820] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 4.175937] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 4.176067] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 4.176186] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 4.176314] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 4.176454] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 4.795900] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 4.796050] [drm:wait_panel_status [i915]] Wait complete [ 4.796209] [drm:edp_panel_on [i915]] Wait for panel power on [ 4.796393] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 4.997183] [drm:wait_panel_status [i915]] Wait complete [ 4.997336] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 4.997501] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A] VDD on [ 4.997694] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 4.998883] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 06 [ 4.999937] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 5.000046] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 5.000153] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 5.000257] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 5.001892] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 5.001991] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 5.002090] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 5.003599] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 5.003623] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 5.003647] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 5.005142] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 5.005164] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 5.005186] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 5.006685] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 5.006709] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 162000, lane count = 2 [ 5.007189] [drm:intel_enable_pipe [i915]] enabling pipe A [ 5.007220] [drm:intel_edp_backlight_on [i915]] [ 5.007246] [drm:intel_panel_enable_backlight [i915]] pipe A [ 5.007350] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 5.007434] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 5.007464] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 5.007490] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 5.024095] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 5.024138] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 5.024186] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 5.024220] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000004f90efc1 [ 5.024235] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000004f90efc1 [ 5.026547] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 5.032842] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000a653e62f [ 5.032858] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 00000000e2bedd51 state to 00000000a653e62f [ 5.032872] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 0000000019608688 state to 00000000a653e62f [ 5.032885] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 000000009fa4fa01 state to 00000000a653e62f [ 5.032895] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 000000009fa4fa01 [ 5.032908] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 0000000037ba556c state to 00000000a653e62f [ 5.032918] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 0000000037ba556c [ 5.032930] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 00000000a252ff7c state to 00000000a653e62f [ 5.032942] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 00000000ba753dc9 state to 00000000a653e62f [ 5.032952] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 00000000ba753dc9 [ 5.032964] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 00000000ef42887a state to 00000000a653e62f [ 5.032973] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 00000000ef42887a [ 5.032985] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 000000008a081ae2 state to 00000000a653e62f [ 5.032996] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 00000000ff3af46f state to 00000000a653e62f [ 5.033006] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 00000000ff3af46f [ 5.033018] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000bfdcbbfd state to 00000000a653e62f [ 5.033027] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 00000000bfdcbbfd [ 5.033037] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 00000000e2bedd51 [ 5.033049] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 00000000a653e62f [ 5.033063] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 00000000fd16bd4c state to 00000000a653e62f [ 5.033073] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000fd16bd4c to [NOCRTC] [ 5.033082] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000fd16bd4c to [CRTC:51:pipe A] [ 5.033095] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 00000000813ee120 state to 00000000a653e62f [ 5.033104] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 00000000813ee120 [ 5.033113] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 00000000a252ff7c [ 5.033125] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 00000000a653e62f [ 5.033138] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 00000000641dfcce state to 00000000a653e62f [ 5.033147] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 00000000641dfcce [ 5.033156] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 000000008a081ae2 [ 5.033167] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 00000000a653e62f [ 5.033179] [drm:drm_atomic_check_only [drm]] checking 00000000a653e62f [ 5.033190] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 5.033211] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 5.033272] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 0, on 0, ms 0 [ 5.033298] [drm:drm_atomic_commit [drm]] committing 00000000a653e62f [ 5.040681] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000a653e62f [ 5.040702] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000a653e62f [ 5.043593] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000004f90efc1 [ 5.043633] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 00000000ab10554d state to 000000004f90efc1 [ 5.043665] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 0000000006d0e975 state to 000000004f90efc1 [ 5.043689] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000be0b3b7f state to 000000004f90efc1 [ 5.043709] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000be0b3b7f [ 5.043733] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000e119794f state to 000000004f90efc1 [ 5.043750] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000e119794f [ 5.043775] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 00000000bc9e3644 state to 000000004f90efc1 [ 5.043797] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 000000004cdb3ffb state to 000000004f90efc1 [ 5.043818] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 000000004cdb3ffb [ 5.043842] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 00000000bc9117b6 state to 000000004f90efc1 [ 5.043861] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 00000000bc9117b6 [ 5.043883] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 00000000eaa2fa6c state to 000000004f90efc1 [ 5.043904] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 0000000021e4292e state to 000000004f90efc1 [ 5.043924] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 0000000021e4292e [ 5.043946] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000f914c057 state to 000000004f90efc1 [ 5.043960] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 00000000f914c057 [ 5.043975] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 00000000ab10554d [ 5.043993] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000004f90efc1 [ 5.044016] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 00000000938e6b76 state to 000000004f90efc1 [ 5.044035] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000938e6b76 to [NOCRTC] [ 5.044055] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000938e6b76 to [CRTC:51:pipe A] [ 5.044078] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 000000006ffce447 state to 000000004f90efc1 [ 5.044096] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 000000006ffce447 [ 5.044113] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 00000000bc9e3644 [ 5.044135] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000004f90efc1 [ 5.044158] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 00000000cab2f085 state to 000000004f90efc1 [ 5.044178] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 00000000cab2f085 [ 5.044196] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 00000000eaa2fa6c [ 5.044218] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000004f90efc1 [ 5.044241] [drm:drm_atomic_check_only [drm]] checking 000000004f90efc1 [ 5.044257] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 5.044269] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 5.044329] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 0, on 0, ms 0 [ 5.044365] [drm:drm_atomic_commit [drm]] committing 000000004f90efc1 [ 5.057290] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000004f90efc1 [ 5.057303] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 5.057325] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000004f90efc1 [ 5.057346] [drm:drm_client_modeset_probe [drm]] [ 5.057359] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 5.057407] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 5.057451] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 5.057493] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 5.057536] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 5.057577] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 5.059332] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 5.059354] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 5.059372] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 5.059515] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 5.059533] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 5.059550] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 5.059567] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 5.059593] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 5.059626] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 5.059650] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 5.059673] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 5.059695] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 5.059717] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 5.059739] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 5.059760] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 5.059782] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 5.059803] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 5.059823] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 5.059847] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 5.059868] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 5.059881] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 5.059935] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 5.060202] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 5.060248] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 5.060498] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 5.060539] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 5.060585] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 5.060624] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 5.063300] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 5.063346] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 5.063608] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 5.063678] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 5.063917] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 5.063948] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 5.063960] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 5.063973] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 5.064010] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 5.064274] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 5.064316] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 5.064561] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 5.064602] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 5.064639] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 5.064676] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 5.067332] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 5.067380] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 5.067643] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 5.067685] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 5.067924] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 5.067952] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 5.067964] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 5.067990] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 5.068012] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 5.068034] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 5.068059] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 5.068078] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 5.068097] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 5.068118] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 5.068139] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 5.068163] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 5.068198] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000a653e62f [ 5.068223] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 00000000ff3af46f state to 00000000a653e62f [ 5.068248] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 00000000e9368239 state to 00000000a653e62f [ 5.068275] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 000000008a081ae2 state to 00000000a653e62f [ 5.068297] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 000000008a081ae2 [ 5.068323] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000ef42887a state to 00000000a653e62f [ 5.068345] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000ef42887a [ 5.068369] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 00000000ba753dc9 state to 00000000a653e62f [ 5.068392] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 00000000a252ff7c state to 00000000a653e62f [ 5.068414] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 00000000a252ff7c [ 5.068440] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 0000000037ba556c state to 00000000a653e62f [ 5.068461] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 0000000037ba556c [ 5.068487] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 000000009fa4fa01 state to 00000000a653e62f [ 5.068510] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 00000000e2bedd51 state to 00000000a653e62f [ 5.068529] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 00000000e2bedd51 [ 5.068555] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 000000001e9ed234 state to 00000000a653e62f [ 5.068576] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 000000001e9ed234 [ 5.068598] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 00000000ff3af46f [ 5.068625] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 00000000a653e62f [ 5.068650] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 00000000f6252de7 state to 00000000a653e62f [ 5.068670] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000f6252de7 to [NOCRTC] [ 5.068693] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000f6252de7 to [CRTC:51:pipe A] [ 5.068724] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 00000000c478993d state to 00000000a653e62f [ 5.068745] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 00000000c478993d [ 5.068766] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 00000000ba753dc9 [ 5.068789] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 00000000a653e62f [ 5.068814] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 000000000c8cc239 state to 00000000a653e62f [ 5.068835] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 000000000c8cc239 [ 5.068855] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 000000009fa4fa01 [ 5.068881] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 00000000a653e62f [ 5.068908] [drm:drm_atomic_check_only [drm]] checking 00000000a653e62f [ 5.068925] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 5.068938] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 5.069006] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 0, on 0, ms 0 [ 5.069047] [drm:drm_atomic_commit [drm]] committing 00000000a653e62f [ 5.073937] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000a653e62f [ 5.073951] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 5.073996] [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=7500/7500 [ 5.074024] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000a653e62f [ 5.074044] [drm:drm_client_modeset_probe [drm]] [ 5.074086] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 5.074096] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 5.074159] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 5.074209] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 5.074255] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 5.074301] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 5.074346] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 5.076556] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 5.076587] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 5.076608] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 5.076811] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 5.076836] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 5.076857] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 5.076882] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 5.076905] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 5.076928] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 5.076952] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 5.076972] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 5.076992] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 5.077016] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 5.077039] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 5.077061] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 5.077084] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 5.077104] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 5.077124] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 5.077147] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 5.077170] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 5.077182] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 5.077249] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 5.077499] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 5.077543] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 5.077768] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 5.077807] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 5.077847] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 5.077885] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 5.080544] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 5.080589] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 5.080830] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 5.080873] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 5.081091] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 5.081120] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 5.081132] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 5.081144] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 5.081188] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 5.081435] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 5.081477] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 5.081691] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 5.081730] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 5.081772] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 5.081814] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 5.084467] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 5.084497] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 5.084808] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 5.084837] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 5.085042] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 5.085066] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 5.085074] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 5.085091] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 5.085107] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 5.085123] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 5.085140] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 5.085155] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 5.085170] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 5.085183] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 5.085198] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 5.085214] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 5.085239] [drm:drm_atomic_state_init [drm]] Allocated atomic state 0000000089d94754 [ 5.085259] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 000000002474259e state to 0000000089d94754 [ 5.085279] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 000000005b06715e state to 0000000089d94754 [ 5.085298] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000484ef7bb state to 0000000089d94754 [ 5.085313] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000484ef7bb [ 5.085331] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 0000000044c9f910 state to 0000000089d94754 [ 5.085346] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 0000000044c9f910 [ 5.085364] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 0000000077dcd0e2 state to 0000000089d94754 [ 5.085382] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 00000000adbabf30 state to 0000000089d94754 [ 5.085396] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 00000000adbabf30 [ 5.085416] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 00000000386a8214 state to 0000000089d94754 [ 5.085431] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 00000000386a8214 [ 5.085449] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 00000000f7c0c117 state to 0000000089d94754 [ 5.085467] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 00000000fc01e44c state to 0000000089d94754 [ 5.085481] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 00000000fc01e44c [ 5.085498] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 0000000044a68901 state to 0000000089d94754 [ 5.085513] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 0000000044a68901 [ 5.085527] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 000000002474259e [ 5.085545] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 0000000089d94754 [ 5.085564] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 000000003498ad83 state to 0000000089d94754 [ 5.085578] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000003498ad83 to [NOCRTC] [ 5.085593] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000003498ad83 to [CRTC:51:pipe A] [ 5.085612] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 0000000011bb5b31 state to 0000000089d94754 [ 5.085625] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 0000000011bb5b31 [ 5.085639] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 0000000077dcd0e2 [ 5.085657] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 0000000089d94754 [ 5.085676] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 00000000b7272811 state to 0000000089d94754 [ 5.085690] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 00000000b7272811 [ 5.085704] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 00000000f7c0c117 [ 5.085721] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 0000000089d94754 [ 5.085740] [drm:drm_atomic_check_only [drm]] checking 0000000089d94754 [ 5.085753] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 5.085762] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 5.085810] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 0, on 0, ms 0 [ 5.085842] [drm:drm_atomic_commit [drm]] committing 0000000089d94754 [ 5.090685] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 0000000089d94754 [ 5.090718] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 0000000089d94754 [ 5.090732] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 5.090778] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 5.090801] [drm:drm_client_modeset_probe [drm]] [ 5.090816] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 5.090871] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 5.090923] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 5.090971] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 5.091018] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 5.091063] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 5.092821] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 5.092850] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 5.092874] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 5.093069] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 5.093094] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 5.093119] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 5.093143] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 5.093167] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 5.093191] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 5.093215] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 5.093239] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 5.093263] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 5.093286] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 5.093310] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 5.093334] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 5.093358] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 5.093382] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 5.093406] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 5.093430] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 5.093454] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 5.093466] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 5.093517] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 5.093786] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 5.093833] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 5.094080] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 5.094118] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 5.094164] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 5.094209] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 5.096866] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 5.096911] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 5.097171] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 5.097211] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 5.097509] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 5.097536] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 5.097544] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 5.097553] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 5.097585] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 5.097826] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 5.097856] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 5.098078] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 5.098112] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 5.098142] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 5.098172] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 5.100843] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 5.100900] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 5.101149] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 5.101193] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 5.101435] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 5.101465] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 5.101477] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 5.101504] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 5.101526] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 5.101548] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 5.101573] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 5.101595] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 5.101617] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 5.101638] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 5.101659] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 5.101683] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 5.101718] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000a653e62f [ 5.101747] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 00000000d7d446c9 state to 00000000a653e62f [ 5.101776] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 00000000a05f1acb state to 00000000a653e62f [ 5.101802] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000d51ba932 state to 00000000a653e62f [ 5.101825] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000d51ba932 [ 5.101853] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 000000001e9ed234 state to 00000000a653e62f [ 5.101876] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 000000001e9ed234 [ 5.101903] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 00000000e2bedd51 state to 00000000a653e62f [ 5.101930] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 000000009fa4fa01 state to 00000000a653e62f [ 5.101951] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 000000009fa4fa01 [ 5.101979] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 0000000037ba556c state to 00000000a653e62f [ 5.102000] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 0000000037ba556c [ 5.102025] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 00000000a252ff7c state to 00000000a653e62f [ 5.102051] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 00000000ba753dc9 state to 00000000a653e62f [ 5.102072] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 00000000ba753dc9 [ 5.102098] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000ef42887a state to 00000000a653e62f [ 5.102121] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 00000000ef42887a [ 5.102144] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 00000000d7d446c9 [ 5.102172] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 00000000a653e62f [ 5.102201] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 0000000034d23a44 state to 00000000a653e62f [ 5.102223] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 0000000034d23a44 to [NOCRTC] [ 5.102246] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 0000000034d23a44 to [CRTC:51:pipe A] [ 5.102273] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 000000006820afd2 state to 00000000a653e62f [ 5.102295] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 000000006820afd2 [ 5.102316] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 00000000e2bedd51 [ 5.102343] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 00000000a653e62f [ 5.102371] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 00000000c270c679 state to 00000000a653e62f [ 5.102392] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 00000000c270c679 [ 5.102412] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 00000000a252ff7c [ 5.102438] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 00000000a653e62f [ 5.102465] [drm:drm_atomic_check_only [drm]] checking 00000000a653e62f [ 5.102485] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 5.102500] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 5.102514] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 5.102541] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 00000000a653e62f [ 5.102567] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 00000000a653e62f [ 5.102629] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 5.102695] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 24 pixel clock 108000KHz [ 5.102744] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 5.102793] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 5.102838] [drm:intel_dp_compute_config [i915]] DP link rate required 243000 available 270000 [ 5.102895] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 5.102951] [drm:pipe_config_mismatch [i915]] fastset mismatch in lane_count (expected 2, found 1) [ 5.103011] [drm:pipe_config_mismatch [i915]] fastset mismatch in dp_m_n (expected tu 64 gmch 4194304/4194304 link 174762/262144, or tu 0 gmch 0/0 link 0/0, found tu 64, gmch 3774873/4194304 link 209715/524288) [ 5.103069] [drm:pipe_config_mismatch [i915]] fastset mismatch in pipe_bpp (expected 24, found 18) [ 5.103124] [drm:pipe_config_mismatch [i915]] fastset mismatch in port_clock (expected 162000, found 270000) [ 5.103183] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 5.103238] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 5.103300] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 5.103355] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 5.103409] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 5.103480] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 5.103536] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 5.103591] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 5.103665] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3774873, gmch_n: 4194304, link_m: 209715, link_n: 524288, tu: 64 [ 5.103727] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 5.103788] [drm:intel_dump_pipe_config [i915]] requested mode: [ 5.103813] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 5.103875] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 5.103902] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 5.103965] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 5.104027] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 5.104088] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 5.104147] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 5.104203] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 5.104251] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 5.104300] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 5.104350] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 5.104398] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 5.104448] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 5.104496] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 5.104544] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 5.104568] [drm:drm_atomic_commit [drm]] committing 00000000a653e62f [ 5.104641] [drm:intel_edp_backlight_off [i915]] [ 5.311771] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 5.311923] [drm:intel_disable_pipe [i915]] disabling pipe A [ 5.326928] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 5.327046] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 5.327188] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000002 control 00000000 [ 5.379702] [drm:wait_panel_status [i915]] Wait complete [ 5.379797] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 5.379886] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 5.379968] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 5.380048] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 5.380136] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 5.380215] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 5.380294] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 5.380373] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 5.380453] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 5.380533] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 5.380610] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 5.380689] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 5.380761] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 5.380832] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 5.380918] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 6.011863] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 6.011967] [drm:wait_panel_status [i915]] Wait complete [ 6.012083] [drm:edp_panel_on [i915]] Wait for panel power on [ 6.012218] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 6.213088] [drm:wait_panel_status [i915]] Wait complete [ 6.213190] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 6.213306] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A] VDD on [ 6.213452] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 6.214585] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a [ 6.215594] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 6.215682] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 6.215746] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 6.215813] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 6.217392] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 6.217452] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 6.217513] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 6.219005] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 6.219019] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 6.219033] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 6.220511] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 6.220525] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 6.220539] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 6.222016] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 6.222031] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 270000, lane count = 1 [ 6.222046] [drm:intel_dp_get_link_train_fallback_values [i915]] Retrying Link training for eDP with same parameters [ 6.222513] [drm:intel_enable_pipe [i915]] enabling pipe A [ 6.222533] [drm:intel_edp_backlight_on [i915]] [ 6.222546] [drm:intel_panel_enable_backlight [i915]] pipe A [ 6.222638] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 6.222712] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 6.222731] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 6.222748] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 6.239373] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 6.239406] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 6.239446] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 6.239482] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000a653e62f [ 6.239499] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000a653e62f [ 6.239508] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 6.239521] [drm:drm_client_modeset_probe [drm]] [ 6.239531] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 6.239562] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 6.239594] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 6.239631] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 6.239661] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 6.239690] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 6.241495] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 6.241511] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 6.241522] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 6.241617] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 6.241628] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 6.241639] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 6.241649] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 6.241659] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 6.241669] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 6.241680] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 6.241690] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 6.241700] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 6.241710] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 6.241720] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 6.241729] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 6.241739] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 6.241749] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 6.241759] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 6.241768] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 6.241778] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 6.241784] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 6.241808] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 6.242110] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 6.242130] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 6.242416] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 6.242459] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 6.242481] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 6.242502] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 6.246213] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 6.246236] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 6.246542] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 6.246561] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 6.246840] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 6.246878] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 6.246883] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 6.246889] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 6.246910] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 6.247208] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 6.247226] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 6.247508] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 6.247551] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 6.247571] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 6.247594] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 6.251224] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 6.251239] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 6.251516] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 6.251530] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 6.251809] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 6.251844] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 6.251848] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 6.251857] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 6.251864] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 6.251871] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 6.251880] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 6.251887] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 6.251894] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 6.251901] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 6.251908] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 6.251915] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 6.251933] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000003a20d61c [ 6.251945] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 00000000ef06b372 state to 000000003a20d61c [ 6.251958] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 00000000b3f99f9c state to 000000003a20d61c [ 6.251969] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000c08bc03b state to 000000003a20d61c [ 6.251978] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000c08bc03b [ 6.251990] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000606e3dd8 state to 000000003a20d61c [ 6.251999] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000606e3dd8 [ 6.252011] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 00000000498ec6d2 state to 000000003a20d61c [ 6.252022] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 0000000044a68901 state to 000000003a20d61c [ 6.252031] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 0000000044a68901 [ 6.252043] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 00000000fc01e44c state to 000000003a20d61c [ 6.252053] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 00000000fc01e44c [ 6.252064] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 00000000f7c0c117 state to 000000003a20d61c [ 6.252076] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 00000000386a8214 state to 000000003a20d61c [ 6.252085] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 00000000386a8214 [ 6.252096] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 0000000010b910ad state to 000000003a20d61c [ 6.252105] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 0000000010b910ad [ 6.252115] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 00000000ef06b372 [ 6.252126] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003a20d61c [ 6.252138] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 000000004bb466d1 state to 000000003a20d61c [ 6.252148] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000004bb466d1 to [NOCRTC] [ 6.252157] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000004bb466d1 to [CRTC:51:pipe A] [ 6.252169] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 000000005fd78289 state to 000000003a20d61c [ 6.252178] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 000000005fd78289 [ 6.252187] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 00000000498ec6d2 [ 6.252199] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000003a20d61c [ 6.252211] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 00000000eca01b0b state to 000000003a20d61c [ 6.252220] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 00000000eca01b0b [ 6.252229] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 00000000f7c0c117 [ 6.252240] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000003a20d61c [ 6.252252] [drm:drm_atomic_check_only [drm]] checking 000000003a20d61c [ 6.252259] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 6.252265] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 6.252293] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 0, on 0, ms 0 [ 6.252311] [drm:drm_atomic_commit [drm]] committing 000000003a20d61c [ 6.255913] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000003a20d61c [ 6.255924] [drm:drm_atomic_state_init [drm]] Allocated atomic state 00000000ccecb98d [ 6.255935] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000003a20d61c [ 6.255946] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 000000002ae147c9 state to 00000000ccecb98d [ 6.255967] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 6.255979] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 000000008f270012 state to 00000000ccecb98d [ 6.255990] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000641e4e05 state to 00000000ccecb98d [ 6.255999] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000641e4e05 [ 6.256010] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000729a9f72 state to 00000000ccecb98d [ 6.256018] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000729a9f72 [ 6.256029] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 000000001dc54b27 state to 00000000ccecb98d [ 6.256039] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 000000002254b966 state to 00000000ccecb98d [ 6.256048] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 000000002254b966 [ 6.256058] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 00000000168b7417 state to 00000000ccecb98d [ 6.256067] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 00000000168b7417 [ 6.256077] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 000000005dae778a state to 00000000ccecb98d [ 6.256087] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 00000000cf2099cd state to 00000000ccecb98d [ 6.256095] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 00000000cf2099cd [ 6.256106] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 000000005ae4f10e state to 00000000ccecb98d [ 6.256114] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 000000005ae4f10e [ 6.256123] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 000000002ae147c9 [ 6.256134] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 00000000ccecb98d [ 6.256145] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 00000000109b2998 state to 00000000ccecb98d [ 6.256154] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000109b2998 to [NOCRTC] [ 6.256163] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000109b2998 to [CRTC:51:pipe A] [ 6.256173] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 00000000750b3266 state to 00000000ccecb98d [ 6.256182] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 00000000750b3266 [ 6.256191] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 000000001dc54b27 [ 6.256202] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 00000000ccecb98d [ 6.256213] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 0000000086edebc3 state to 00000000ccecb98d [ 6.256222] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 0000000086edebc3 [ 6.256230] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 000000005dae778a [ 6.256240] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 00000000ccecb98d [ 6.256251] [drm:drm_atomic_check_only [drm]] checking 00000000ccecb98d [ 6.256258] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 6.256264] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 6.256269] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 6.256280] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 00000000ccecb98d [ 6.256290] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 00000000ccecb98d [ 6.256317] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 6.256344] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 24 pixel clock 108000KHz [ 6.256363] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 6.256382] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 6.256399] [drm:intel_dp_compute_config [i915]] DP link rate required 243000 available 270000 [ 6.256421] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 6.256446] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 6.256468] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 6.256491] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 6.256512] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 6.256532] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 6.256559] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 6.256580] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 6.256601] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 6.256622] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3774873, gmch_n: 4194304, link_m: 209715, link_n: 524288, tu: 64 [ 6.256643] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 6.256664] [drm:intel_dump_pipe_config [i915]] requested mode: [ 6.256675] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 6.256696] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 6.256706] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 6.256728] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 6.256750] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 6.256772] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 6.256792] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 6.256813] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 6.256834] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 6.256854] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 6.256876] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 6.256896] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 6.256917] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 6.256938] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 6.256958] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 6.256970] [drm:drm_atomic_commit [drm]] committing 00000000ccecb98d [ 6.257006] [drm:intel_edp_backlight_off [i915]] [ 6.463777] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 6.463928] [drm:intel_disable_pipe [i915]] disabling pipe A [ 6.474944] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 6.475063] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 6.475205] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000002 control 00000000 [ 6.527798] [drm:wait_panel_status [i915]] Wait complete [ 6.527897] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 6.527989] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 6.528076] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 6.528159] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 6.528254] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 6.528336] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 6.528417] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 6.528501] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 6.528585] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 6.528669] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 6.528751] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 6.528834] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 6.528910] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 6.528985] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 6.529074] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 7.163817] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 7.163941] [drm:wait_panel_status [i915]] Wait complete [ 7.164079] [drm:edp_panel_on [i915]] Wait for panel power on [ 7.164212] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 7.366363] [drm:wait_panel_status [i915]] Wait complete [ 7.366461] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 7.366572] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A] VDD on [ 7.366712] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 7.367852] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a [ 7.368862] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 7.368926] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 7.368989] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 7.369052] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 7.370654] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 7.370715] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 7.370776] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 7.372366] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 7.372428] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 7.372489] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 7.374105] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 7.374167] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 7.374228] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 7.375998] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 7.376062] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 270000, lane count = 1 [ 7.376192] [drm:intel_dp_get_link_train_fallback_values [i915]] Retrying Link training for eDP with same parameters [ 7.376810] [drm:intel_enable_pipe [i915]] enabling pipe A [ 7.376890] [drm:intel_edp_backlight_on [i915]] [ 7.376950] [drm:intel_panel_enable_backlight [i915]] pipe A [ 7.377130] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 7.377293] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 7.377404] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 7.377504] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 7.393796] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 7.393899] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 7.394020] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 7.394087] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 7.394139] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 00000000ccecb98d [ 7.394180] [drm:drm_client_modeset_probe [drm]] [ 7.394230] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 00000000ccecb98d [ 7.394253] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 7.394348] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 7.394438] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 7.394522] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 7.394604] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 7.394682] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 7.396589] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 7.396635] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 7.396672] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 7.396969] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 7.397005] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 7.397040] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 7.397073] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 7.397106] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 7.397139] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 7.397174] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 7.397206] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 7.397239] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 7.397271] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 7.397303] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 7.397335] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 7.397367] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 7.397401] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 7.397432] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 7.397464] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 7.397496] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 7.397513] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 7.397583] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 7.397952] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 7.398018] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 7.398352] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 7.398420] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 7.398499] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 7.398589] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 7.402280] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 7.402350] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 7.402695] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 7.402759] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 7.403375] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 7.403429] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 7.403447] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 7.403463] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 7.403529] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 7.403848] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 7.403910] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 7.404239] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 7.404308] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 7.404371] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 7.404431] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 7.408198] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 7.408260] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 7.408610] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 7.408668] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 7.408997] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 7.409049] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 7.409065] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 7.409101] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 7.409134] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 7.409165] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 7.409200] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 7.409230] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 7.409260] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 7.409289] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 7.409318] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 7.409351] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 7.409419] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000003a20d61c [ 7.409472] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 00000000550aa6eb state to 000000003a20d61c [ 7.409523] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 000000002bba987c state to 000000003a20d61c [ 7.409572] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000dc80abb1 state to 000000003a20d61c [ 7.409619] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000dc80abb1 [ 7.409669] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000f021c6d7 state to 000000003a20d61c [ 7.409710] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000f021c6d7 [ 7.409758] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 00000000b1cbd6b8 state to 000000003a20d61c [ 7.409806] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 000000000e54fe3b state to 000000003a20d61c [ 7.409847] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 000000000e54fe3b [ 7.409895] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 0000000010b910ad state to 000000003a20d61c [ 7.409939] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 0000000010b910ad [ 7.409989] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 00000000386a8214 state to 000000003a20d61c [ 7.410038] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 00000000f7c0c117 state to 000000003a20d61c [ 7.410078] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 00000000f7c0c117 [ 7.410127] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000fc01e44c state to 000000003a20d61c [ 7.410166] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 00000000fc01e44c [ 7.410209] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 00000000550aa6eb [ 7.410258] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003a20d61c [ 7.410309] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 000000007b561a13 state to 000000003a20d61c [ 7.410351] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000007b561a13 to [NOCRTC] [ 7.410393] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000007b561a13 to [CRTC:51:pipe A] [ 7.410442] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 000000007d9b3188 state to 000000003a20d61c [ 7.410483] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 000000007d9b3188 [ 7.410524] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 00000000b1cbd6b8 [ 7.410572] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000003a20d61c [ 7.410622] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 00000000eca01b0b state to 000000003a20d61c [ 7.410663] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 00000000eca01b0b [ 7.410703] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 00000000386a8214 [ 7.410751] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000003a20d61c [ 7.410799] [drm:drm_atomic_check_only [drm]] checking 000000003a20d61c [ 7.410829] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 7.410853] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 7.410968] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 0, on 0, ms 0 [ 7.411042] [drm:drm_atomic_commit [drm]] committing 000000003a20d61c [ 7.427050] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000003a20d61c [ 7.427097] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000003a20d61c [ 7.427183] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 7.427234] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 7.427265] [drm:drm_client_modeset_probe [drm]] [ 7.427285] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 7.427365] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 7.427445] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 7.427528] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 7.427609] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 7.427700] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 7.429561] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 7.429603] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 7.429636] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 7.429906] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 7.429941] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 7.429973] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 7.430005] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 7.430038] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 7.430070] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 7.430101] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 7.430133] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 7.430164] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 7.430196] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 7.430227] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 7.430257] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 7.430289] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 7.430320] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 7.430352] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 7.430382] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 7.430413] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 7.430430] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 7.430498] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 7.430853] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 7.430916] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 7.431246] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 7.431293] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 7.431354] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 7.431415] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 7.435141] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 7.435187] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 7.435515] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 7.435557] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 7.435842] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 7.435895] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 7.435911] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 7.435927] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 7.435989] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 7.436336] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 7.436396] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 7.436694] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 7.436738] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 7.436783] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 7.436825] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 7.440394] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 7.440440] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 7.440769] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 7.440811] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 7.441110] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 7.441156] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 7.441167] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 7.441192] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 7.441214] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 7.441235] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 7.441258] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 7.441279] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 7.441299] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 7.441319] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 7.441339] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 7.441361] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 7.441396] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000003a20d61c [ 7.441424] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 0000000044a68901 state to 000000003a20d61c [ 7.441452] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 000000005fd78289 state to 000000003a20d61c [ 7.441478] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000498ec6d2 state to 000000003a20d61c [ 7.441499] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000498ec6d2 [ 7.441524] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000606e3dd8 state to 000000003a20d61c [ 7.441544] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000606e3dd8 [ 7.441570] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 00000000c08bc03b state to 000000003a20d61c [ 7.441595] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 00000000ef06b372 state to 000000003a20d61c [ 7.441615] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 00000000ef06b372 [ 7.441640] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 0000000044ed77e0 state to 000000003a20d61c [ 7.441660] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 0000000044ed77e0 [ 7.441685] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 00000000bf4f36f2 state to 000000003a20d61c [ 7.441711] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 000000009112227e state to 000000003a20d61c [ 7.441731] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 000000009112227e [ 7.441755] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000dd3a3bc8 state to 000000003a20d61c [ 7.441775] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 00000000dd3a3bc8 [ 7.441795] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 0000000044a68901 [ 7.441821] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003a20d61c [ 7.441848] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 000000002c5b2738 state to 000000003a20d61c [ 7.441868] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000002c5b2738 to [NOCRTC] [ 7.441887] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000002c5b2738 to [CRTC:51:pipe A] [ 7.441914] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 00000000b3f99f9c state to 000000003a20d61c [ 7.441934] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 00000000b3f99f9c [ 7.441953] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 00000000c08bc03b [ 7.441978] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000003a20d61c [ 7.442006] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 000000004f49daf4 state to 000000003a20d61c [ 7.442026] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 000000004f49daf4 [ 7.442046] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 00000000bf4f36f2 [ 7.442070] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000003a20d61c [ 7.442096] [drm:drm_atomic_check_only [drm]] checking 000000003a20d61c [ 7.442115] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 7.442129] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 7.442142] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 7.442167] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003a20d61c [ 7.442193] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 000000003a20d61c [ 7.442259] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 7.442325] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 24 pixel clock 108000KHz [ 7.442373] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 7.442418] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 7.442462] [drm:intel_dp_compute_config [i915]] DP link rate required 243000 available 270000 [ 7.442518] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 7.442581] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 7.442636] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 7.442697] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 7.442750] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 7.442799] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 7.442869] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 7.442922] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 7.442974] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 7.443028] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3774873, gmch_n: 4194304, link_m: 209715, link_n: 524288, tu: 64 [ 7.443079] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 7.443130] [drm:intel_dump_pipe_config [i915]] requested mode: [ 7.443156] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 7.443209] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 7.443234] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 7.443289] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 7.443341] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 7.443393] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 7.443452] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 7.443522] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 7.443596] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 7.443683] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 7.443758] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 7.443815] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 7.443868] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 7.443920] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 7.443970] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 7.444000] [drm:drm_atomic_commit [drm]] committing 000000003a20d61c [ 7.444081] [drm:intel_edp_backlight_off [i915]] [ 7.651778] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 7.651925] [drm:intel_disable_pipe [i915]] disabling pipe A [ 7.662854] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 7.662973] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 7.663118] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000 [ 7.714349] [drm:wait_panel_status [i915]] Wait complete [ 7.714445] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 7.714537] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 7.714623] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 7.714707] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 7.714799] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 7.714881] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 7.714963] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 7.715045] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 7.715128] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 7.715209] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 7.715292] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 7.715374] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 7.715449] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 7.715524] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 7.715614] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 8.347787] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 8.347887] [drm:wait_panel_status [i915]] Wait complete [ 8.348000] [drm:edp_panel_on [i915]] Wait for panel power on [ 8.348142] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 8.549093] [drm:wait_panel_status [i915]] Wait complete [ 8.549194] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 8.549309] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A] VDD on [ 8.549452] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 8.550592] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a [ 8.551598] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 8.551686] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 8.551751] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 8.551818] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 8.553408] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 8.553471] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 8.553534] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 8.555033] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 8.555048] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 8.555062] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 8.556539] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 8.556554] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 8.556568] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 8.558045] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 8.558060] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 270000, lane count = 1 [ 8.558075] [drm:intel_dp_get_link_train_fallback_values [i915]] Retrying Link training for eDP with same parameters [ 8.558542] [drm:intel_enable_pipe [i915]] enabling pipe A [ 8.558563] [drm:intel_edp_backlight_on [i915]] [ 8.558576] [drm:intel_panel_enable_backlight [i915]] pipe A [ 8.558670] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 8.558745] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 8.558764] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 8.558780] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 8.575442] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 8.575545] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 8.575698] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 8.575793] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000003a20d61c [ 8.575859] [drm:drm_atomic_state_init [drm]] Allocated atomic state 0000000032abe03e [ 8.575902] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000003a20d61c [ 8.575961] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 0000000088f323d6 state to 0000000032abe03e [ 8.576043] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 8.576100] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 00000000334ade26 state to 0000000032abe03e [ 8.576156] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000be0b3b7f state to 0000000032abe03e [ 8.576208] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000be0b3b7f [ 8.576268] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000f914c057 state to 0000000032abe03e [ 8.576318] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000f914c057 [ 8.576379] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 0000000021e4292e state to 0000000032abe03e [ 8.576432] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 00000000eaa2fa6c state to 0000000032abe03e [ 8.576476] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 00000000eaa2fa6c [ 8.576536] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 00000000bc9117b6 state to 0000000032abe03e [ 8.576585] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 00000000bc9117b6 [ 8.576644] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 0000000072d60733 state to 0000000032abe03e [ 8.576704] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 000000005e3620ca state to 0000000032abe03e [ 8.576747] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 000000005e3620ca [ 8.576799] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000e72c5d40 state to 0000000032abe03e [ 8.576850] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 00000000e72c5d40 [ 8.576903] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 0000000088f323d6 [ 8.576962] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 0000000032abe03e [ 8.577024] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 000000003ff34eea state to 0000000032abe03e [ 8.577067] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000003ff34eea to [NOCRTC] [ 8.577113] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000003ff34eea to [CRTC:51:pipe A] [ 8.577175] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 00000000495697b1 state to 0000000032abe03e [ 8.577224] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 00000000495697b1 [ 8.577273] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 0000000021e4292e [ 8.577333] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 0000000032abe03e [ 8.577387] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 00000000eac4544b state to 0000000032abe03e [ 8.577430] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 00000000eac4544b [ 8.577481] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 0000000072d60733 [ 8.577538] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 0000000032abe03e [ 8.577597] [drm:drm_atomic_check_only [drm]] checking 0000000032abe03e [ 8.577635] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 8.577663] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 8.577690] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 8.577750] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 0000000032abe03e [ 8.577809] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 0000000032abe03e [ 8.577940] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 8.578080] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 24 pixel clock 108000KHz [ 8.578185] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 8.578273] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 8.578364] [drm:intel_dp_compute_config [i915]] DP link rate required 243000 available 270000 [ 8.578487] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 8.578618] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 8.578723] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 8.578857] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 8.578975] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 8.579075] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 8.579228] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 8.579346] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 8.579451] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 8.579577] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3774873, gmch_n: 4194304, link_m: 209715, link_n: 524288, tu: 64 [ 8.579723] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 8.579827] [drm:intel_dump_pipe_config [i915]] requested mode: [ 8.579883] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 8.580006] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 8.580058] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 8.580162] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 8.580268] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 8.580394] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 8.580516] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 8.580621] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 8.580744] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 8.580865] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 8.580975] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 8.581099] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 8.581224] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 8.581320] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 8.581348] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 8.581362] [drm:drm_atomic_commit [drm]] committing 0000000032abe03e [ 8.581412] [drm:intel_edp_backlight_off [i915]] [ 8.787776] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 8.787927] [drm:intel_disable_pipe [i915]] disabling pipe A [ 8.793981] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 8.794099] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 8.794242] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000002 control 00000000 [ 8.846475] [drm:wait_panel_status [i915]] Wait complete [ 8.846574] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 8.846667] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 8.846760] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 8.846850] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 8.846951] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 8.847044] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 8.847135] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 8.847227] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 8.847322] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 8.847416] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 8.847507] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 8.847601] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 8.847730] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 8.847828] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 8.847944] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 9.467852] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 9.467957] [drm:wait_panel_status [i915]] Wait complete [ 9.468076] [drm:edp_panel_on [i915]] Wait for panel power on [ 9.468219] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 9.670309] [drm:wait_panel_status [i915]] Wait complete [ 9.670408] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 9.670520] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A] VDD on [ 9.670662] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 9.671804] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a [ 9.672816] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 9.672881] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 9.672944] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 9.673009] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 9.674608] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 9.674671] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 9.674733] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 9.676265] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 9.676280] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 9.676295] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 9.677776] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 9.677791] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 9.677805] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 9.679287] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 9.679302] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 270000, lane count = 1 [ 9.679317] [drm:intel_dp_get_link_train_fallback_values [i915]] Retrying Link training for eDP with same parameters [ 9.679786] [drm:intel_enable_pipe [i915]] enabling pipe A [ 9.679806] [drm:intel_edp_backlight_on [i915]] [ 9.679819] [drm:intel_panel_enable_backlight [i915]] pipe A [ 9.679912] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 9.679986] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 9.680005] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 9.680022] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 9.696666] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 9.696699] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 9.696739] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 9.696779] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 0000000032abe03e [ 9.696796] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 0000000032abe03e [ 9.696807] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 9.696818] [drm:drm_client_modeset_probe [drm]] [ 9.696826] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 9.696853] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 9.696878] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 9.696900] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 9.696922] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 9.696944] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 9.698737] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 9.698752] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 9.698763] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 9.698856] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 9.698868] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 9.698878] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 9.698889] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 9.698899] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 9.698909] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 9.698919] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 9.698929] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 9.698940] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 9.698950] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 9.698960] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 9.698969] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 9.698979] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 9.698989] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 9.698999] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 9.699009] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 9.699019] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 9.699024] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 9.699048] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 9.699355] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 9.699374] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 9.699656] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 9.699697] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 9.699717] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 9.699736] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 9.703410] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 9.703432] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 9.703735] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 9.703756] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 9.704037] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 9.704075] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 9.704081] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 9.704086] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 9.704108] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 9.704407] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 9.704428] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 9.704706] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 9.704749] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 9.704770] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 9.704791] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 9.708470] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 9.708492] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 9.708791] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 9.708812] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 9.709094] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 9.709132] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 9.709138] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 9.709151] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 9.709162] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 9.709174] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 9.709186] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 9.709197] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 9.709208] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 9.709219] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 9.709229] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 9.709241] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 9.709259] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000003a20d61c [ 9.709274] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 000000009112227e state to 000000003a20d61c [ 9.709288] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 000000007c3ee9a8 state to 000000003a20d61c [ 9.709302] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000bf4f36f2 state to 000000003a20d61c [ 9.709313] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000bf4f36f2 [ 9.709329] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 0000000044ed77e0 state to 000000003a20d61c [ 9.709339] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 0000000044ed77e0 [ 9.709353] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 00000000dbd10097 state to 000000003a20d61c [ 9.709366] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 000000006519e8cb state to 000000003a20d61c [ 9.709376] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 000000006519e8cb [ 9.709390] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 00000000ab10554d state to 000000003a20d61c [ 9.709401] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 00000000ab10554d [ 9.709414] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 00000000ef06b372 state to 000000003a20d61c [ 9.709427] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 00000000c08bc03b state to 000000003a20d61c [ 9.709437] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 00000000c08bc03b [ 9.709450] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000606e3dd8 state to 000000003a20d61c [ 9.709460] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 00000000606e3dd8 [ 9.709471] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 000000009112227e [ 9.709485] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003a20d61c [ 9.709499] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 00000000e5cd3eb6 state to 000000003a20d61c [ 9.709510] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000e5cd3eb6 to [NOCRTC] [ 9.709520] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000e5cd3eb6 to [CRTC:51:pipe A] [ 9.709534] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 0000000023932f2d state to 000000003a20d61c [ 9.709544] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 0000000023932f2d [ 9.709554] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 00000000dbd10097 [ 9.709568] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000003a20d61c [ 9.709582] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 0000000011d63261 state to 000000003a20d61c [ 9.709592] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 0000000011d63261 [ 9.709602] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 00000000ef06b372 [ 9.709615] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000003a20d61c [ 9.709629] [drm:drm_atomic_check_only [drm]] checking 000000003a20d61c [ 9.709639] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 9.709646] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 9.709682] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 0, on 0, ms 0 [ 9.709705] [drm:drm_atomic_commit [drm]] committing 000000003a20d61c [ 9.713248] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000003a20d61c [ 9.713316] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000003a20d61c [ 9.713435] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 9.713502] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 9.713549] [drm:drm_client_modeset_probe [drm]] [ 9.713577] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 9.713688] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 9.713799] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 9.713912] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 9.714020] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 9.714128] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 9.716021] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 9.716080] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 9.716132] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 9.716549] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 9.716605] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 9.716657] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 9.716710] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 9.716762] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 9.716814] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 9.716866] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 9.716920] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 9.716971] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 9.717022] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 9.717074] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 9.717125] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 9.717179] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 9.717235] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 9.717286] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 9.717337] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 9.717389] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 9.717413] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 9.717519] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 9.717917] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 9.718016] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 9.718387] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 9.718466] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 9.718560] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 9.718654] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 9.722452] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 9.722546] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 9.722932] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 9.723023] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 9.723382] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 9.723444] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 9.723468] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 9.723491] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 9.723585] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 9.723982] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 9.724070] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 9.724433] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 9.724514] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 9.724606] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 9.724706] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 9.728636] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 9.728756] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 9.729161] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 9.729263] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 9.730986] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 9.731043] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 9.731061] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 9.731099] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 9.731138] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 9.731174] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 9.731214] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 9.731251] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 9.731284] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 9.731317] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 9.731349] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 9.731386] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 9.731431] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000003a20d61c [ 9.731476] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 0000000044a68901 state to 000000003a20d61c [ 9.731517] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 000000008a9b1d8a state to 000000003a20d61c [ 9.731560] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000f0e4482c state to 000000003a20d61c [ 9.731594] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000f0e4482c [ 9.731652] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000fc01e44c state to 000000003a20d61c [ 9.731687] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000fc01e44c [ 9.731730] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 00000000f7c0c117 state to 000000003a20d61c [ 9.731771] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 00000000386a8214 state to 000000003a20d61c [ 9.731805] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 00000000386a8214 [ 9.731847] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 0000000010b910ad state to 000000003a20d61c [ 9.731882] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 0000000010b910ad [ 9.731924] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 000000000e54fe3b state to 000000003a20d61c [ 9.731968] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 00000000b1cbd6b8 state to 000000003a20d61c [ 9.732002] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 00000000b1cbd6b8 [ 9.732042] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000f021c6d7 state to 000000003a20d61c [ 9.732076] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 00000000f021c6d7 [ 9.732110] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 0000000044a68901 [ 9.732153] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003a20d61c [ 9.732197] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 00000000938e6b76 state to 000000003a20d61c [ 9.732236] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000938e6b76 to [NOCRTC] [ 9.732270] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000938e6b76 to [CRTC:51:pipe A] [ 9.732314] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 00000000149e8c45 state to 000000003a20d61c [ 9.732347] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 00000000149e8c45 [ 9.732381] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 00000000f7c0c117 [ 9.732423] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000003a20d61c [ 9.732467] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 000000005e0f0145 state to 000000003a20d61c [ 9.732504] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 000000005e0f0145 [ 9.732538] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 000000000e54fe3b [ 9.732578] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000003a20d61c [ 9.732619] [drm:drm_atomic_check_only [drm]] checking 000000003a20d61c [ 9.732645] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 9.732665] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 9.732689] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 9.732729] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003a20d61c [ 9.732767] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 000000003a20d61c [ 9.732866] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 9.732962] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 24 pixel clock 108000KHz [ 9.733032] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 9.733108] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 9.733169] [drm:intel_dp_compute_config [i915]] DP link rate required 243000 available 270000 [ 9.733259] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 9.733357] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 9.733445] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 9.733539] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 9.733619] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 9.733686] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 9.733779] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 9.733856] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 9.733941] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 9.734027] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3774873, gmch_n: 4194304, link_m: 209715, link_n: 524288, tu: 64 [ 9.734112] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 9.734186] [drm:intel_dump_pipe_config [i915]] requested mode: [ 9.734219] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 9.734300] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 9.734337] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 9.734423] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 9.734505] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 9.734595] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 9.734682] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 9.734761] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 9.734846] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 9.734927] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 9.735016] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 9.735102] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 9.735188] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 9.735277] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 9.735342] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 9.735377] [drm:drm_atomic_commit [drm]] committing 000000003a20d61c [ 9.735467] [drm:intel_edp_backlight_off [i915]] [ 9.939659] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 9.939744] [drm:intel_disable_pipe [i915]] disabling pipe A [ 9.948127] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 9.948228] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 9.948347] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000 [ 9.999755] [drm:wait_panel_status [i915]] Wait complete [ 9.999849] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 9.999936] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 10.000019] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 10.000099] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 10.000187] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 10.000267] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 10.000346] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 10.000423] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 10.000503] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 10.000582] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 10.000660] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 10.000739] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 10.000813] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 10.000883] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 10.000966] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 10.619816] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 10.619873] [drm:wait_panel_status [i915]] Wait complete [ 10.619947] [drm:edp_panel_on [i915]] Wait for panel power on [ 10.620047] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 10.821131] [drm:wait_panel_status [i915]] Wait complete [ 10.821233] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 10.821349] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A] VDD on [ 10.821493] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 10.822628] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a [ 10.823641] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 10.823730] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 10.823793] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 10.823860] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 10.825447] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 10.825508] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 10.825568] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 10.827053] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 10.827067] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 10.827081] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 10.828559] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 10.828573] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 10.828587] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 10.830068] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 10.830083] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 270000, lane count = 1 [ 10.830097] [drm:intel_dp_get_link_train_fallback_values [i915]] Retrying Link training for eDP with same parameters [ 10.830562] [drm:intel_enable_pipe [i915]] enabling pipe A [ 10.830583] [drm:intel_edp_backlight_on [i915]] [ 10.830596] [drm:intel_panel_enable_backlight [i915]] pipe A [ 10.830688] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 10.830763] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 10.830781] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 10.830798] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 10.847447] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 10.847481] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 10.847520] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 10.847564] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000003a20d61c [ 10.847582] [drm:drm_atomic_state_init [drm]] Allocated atomic state 0000000043bc09b6 [ 10.847601] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000003a20d61c [ 10.847618] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 00000000641e4e05 state to 0000000043bc09b6 [ 10.847647] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 10.847666] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 000000000a1a6b6e state to 0000000043bc09b6 [ 10.847683] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 000000002ae147c9 state to 0000000043bc09b6 [ 10.847699] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 000000002ae147c9 [ 10.847717] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000aab566a4 state to 0000000043bc09b6 [ 10.847732] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000aab566a4 [ 10.847749] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 0000000063ae2f50 state to 0000000043bc09b6 [ 10.847766] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 000000002add5bf1 state to 0000000043bc09b6 [ 10.847784] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 000000002add5bf1 [ 10.847801] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 000000000bd6a34a state to 0000000043bc09b6 [ 10.847817] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 000000000bd6a34a [ 10.847835] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 00000000ae68f276 state to 0000000043bc09b6 [ 10.847852] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 000000001dc54b27 state to 0000000043bc09b6 [ 10.847868] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 000000001dc54b27 [ 10.847885] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 000000002254b966 state to 0000000043bc09b6 [ 10.847901] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 000000002254b966 [ 10.847917] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 00000000641e4e05 [ 10.847935] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 0000000043bc09b6 [ 10.847953] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 00000000e83063ab state to 0000000043bc09b6 [ 10.847968] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000e83063ab to [NOCRTC] [ 10.847982] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000e83063ab to [CRTC:51:pipe A] [ 10.848000] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 0000000086edebc3 state to 0000000043bc09b6 [ 10.848014] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 0000000086edebc3 [ 10.848027] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 0000000063ae2f50 [ 10.848043] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 0000000043bc09b6 [ 10.848059] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 00000000750b3266 state to 0000000043bc09b6 [ 10.848072] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 00000000750b3266 [ 10.848084] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 00000000ae68f276 [ 10.848098] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 0000000043bc09b6 [ 10.848113] [drm:drm_atomic_check_only [drm]] checking 0000000043bc09b6 [ 10.848127] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 10.848135] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 10.848143] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 10.848160] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 0000000043bc09b6 [ 10.848176] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 0000000043bc09b6 [ 10.848225] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 10.848270] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 24 pixel clock 108000KHz [ 10.848301] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 10.848329] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 10.848356] [drm:intel_dp_compute_config [i915]] DP link rate required 243000 available 270000 [ 10.848389] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 10.848429] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 10.848460] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 10.848494] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 10.848523] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 10.848549] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 10.848587] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 10.848617] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 10.848645] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 10.848674] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3774873, gmch_n: 4194304, link_m: 209715, link_n: 524288, tu: 64 [ 10.848703] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 10.848731] [drm:intel_dump_pipe_config [i915]] requested mode: [ 10.848745] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 10.848788] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 10.848803] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 10.848837] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 10.848869] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 10.848902] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 10.848934] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 10.848968] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 10.849000] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 10.849031] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 10.849064] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 10.849096] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 10.849128] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 10.849159] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 10.849190] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 10.849207] [drm:drm_atomic_commit [drm]] committing 0000000043bc09b6 [ 10.849282] [drm:intel_edp_backlight_off [i915]] [ 11.055761] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 11.055913] [drm:intel_disable_pipe [i915]] disabling pipe A [ 11.066950] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 11.067067] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 11.067208] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000002 control 00000000 [ 11.119799] [drm:wait_panel_status [i915]] Wait complete [ 11.119897] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 11.119990] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 11.120075] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 11.120157] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 11.120251] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 11.120334] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 11.120414] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 11.120497] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 11.120580] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 11.120661] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 11.120742] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 11.120824] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 11.120899] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 11.120973] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 11.121062] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 11.739851] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 11.739952] [drm:wait_panel_status [i915]] Wait complete [ 11.740063] [drm:edp_panel_on [i915]] Wait for panel power on [ 11.740202] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 11.942480] [drm:wait_panel_status [i915]] Wait complete [ 11.942582] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 11.942699] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A] VDD on [ 11.942843] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 11.943985] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a [ 11.944928] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 11.944943] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 11.944957] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 11.944972] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 11.946464] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 11.946478] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 11.946492] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 11.947975] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 11.947989] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 11.948003] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 11.949483] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 11.949498] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 11.949512] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 11.950995] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 11.951010] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 270000, lane count = 1 [ 11.951025] [drm:intel_dp_get_link_train_fallback_values [i915]] Retrying Link training for eDP with same parameters [ 11.951495] [drm:intel_enable_pipe [i915]] enabling pipe A [ 11.951515] [drm:intel_edp_backlight_on [i915]] [ 11.951528] [drm:intel_panel_enable_backlight [i915]] pipe A [ 11.951632] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 11.951707] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 11.951725] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 11.951742] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 11.968374] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 11.968410] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 11.968455] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 11.968486] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 11.968505] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 0000000043bc09b6 [ 11.968520] [drm:drm_client_modeset_probe [drm]] [ 11.968537] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 0000000043bc09b6 [ 11.968545] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 11.968578] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 11.968609] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 11.968638] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 11.968667] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 11.968694] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 11.970497] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 11.970513] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 11.970526] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 11.970632] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 11.970645] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 11.970657] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 11.970668] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 11.970680] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 11.970691] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 11.970702] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 11.970713] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 11.970725] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 11.970736] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 11.970747] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 11.970758] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 11.970769] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 11.970780] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 11.970791] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 11.970802] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 11.970813] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 11.970819] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 11.970845] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 11.971153] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 11.971176] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 11.971458] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 11.971501] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 11.971525] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 11.971546] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 11.975242] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 11.975268] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 11.975567] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 11.975603] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 11.975895] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 11.975934] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 11.975941] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 11.975948] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 11.975973] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 11.976277] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 11.976301] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 11.976585] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 11.976630] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 11.976655] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 11.976678] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 11.980369] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 11.980394] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 11.980698] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 11.980721] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 11.981007] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 11.981045] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 11.981052] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 11.981066] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 11.981080] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 11.981092] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 11.981106] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 11.981118] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 11.981130] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 11.981141] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 11.981153] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 11.981166] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 11.981191] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000003a20d61c [ 11.981211] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 00000000606e3dd8 state to 000000003a20d61c [ 11.981230] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 0000000011d63261 state to 000000003a20d61c [ 11.981248] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000c08bc03b state to 000000003a20d61c [ 11.981263] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000c08bc03b [ 11.981281] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000ef06b372 state to 000000003a20d61c [ 11.981296] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000ef06b372 [ 11.981314] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 00000000550aa6eb state to 000000003a20d61c [ 11.981331] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 00000000dc80abb1 state to 000000003a20d61c [ 11.981346] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 00000000dc80abb1 [ 11.981364] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 00000000f021c6d7 state to 000000003a20d61c [ 11.981379] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 00000000f021c6d7 [ 11.981397] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 00000000b1cbd6b8 state to 000000003a20d61c [ 11.981414] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 000000000e54fe3b state to 000000003a20d61c [ 11.981429] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 000000000e54fe3b [ 11.981447] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 0000000010b910ad state to 000000003a20d61c [ 11.981462] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 0000000010b910ad [ 11.981477] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 00000000606e3dd8 [ 11.981496] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003a20d61c [ 11.981514] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 0000000063e64399 state to 000000003a20d61c [ 11.981530] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 0000000063e64399 to [NOCRTC] [ 11.981545] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 0000000063e64399 to [CRTC:51:pipe A] [ 11.981563] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 0000000023932f2d state to 000000003a20d61c [ 11.981578] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 0000000023932f2d [ 11.981592] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 00000000550aa6eb [ 11.981610] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000003a20d61c [ 11.981629] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 000000007c3ee9a8 state to 000000003a20d61c [ 11.981644] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 000000007c3ee9a8 [ 11.981658] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 00000000b1cbd6b8 [ 11.981676] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000003a20d61c [ 11.981694] [drm:drm_atomic_check_only [drm]] checking 000000003a20d61c [ 11.981707] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 11.981716] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 11.981762] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 0, on 0, ms 0 [ 11.981792] [drm:drm_atomic_commit [drm]] committing 000000003a20d61c [ 11.984936] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000003a20d61c [ 11.984997] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000003a20d61c [ 11.985106] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 11.985169] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 11.985212] [drm:drm_client_modeset_probe [drm]] [ 11.985239] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 11.985341] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 11.985444] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 11.985541] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 11.985639] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 11.985738] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 11.987619] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 11.987686] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 11.987736] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 11.988126] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 11.988176] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 11.988225] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 11.988272] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 11.988320] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 11.988370] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 11.988417] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 11.988463] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 11.988509] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 11.988555] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 11.988601] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 11.988647] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 11.988705] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 11.988716] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 11.988726] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 11.988737] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 11.988748] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 11.988753] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 11.988777] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 11.989082] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 11.989103] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 11.989382] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 11.989424] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 11.989446] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 11.989466] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 11.993161] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 11.993189] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 11.993501] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 11.993525] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 11.993810] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 11.993849] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 11.993855] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 11.993862] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 11.993885] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 11.994191] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 11.994213] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 11.994498] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 11.994543] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 11.994565] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 11.994586] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 11.997728] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 11.997757] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 11.998569] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 11.998595] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 11.998888] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 11.998913] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 11.998919] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 11.998934] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 11.998945] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 11.998956] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 11.998968] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 11.998980] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 11.998991] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 11.999000] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 11.999011] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 11.999022] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 11.999039] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000003a20d61c [ 11.999054] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 00000000386a8214 state to 000000003a20d61c [ 11.999069] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 00000000a16e100a state to 000000003a20d61c [ 11.999083] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000f7c0c117 state to 000000003a20d61c [ 11.999094] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000f7c0c117 [ 11.999108] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000fc01e44c state to 000000003a20d61c [ 11.999119] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000fc01e44c [ 11.999132] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 00000000f0e4482c state to 000000003a20d61c [ 11.999145] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 0000000044a68901 state to 000000003a20d61c [ 11.999155] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 0000000044a68901 [ 11.999168] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 000000006519e8cb state to 000000003a20d61c [ 11.999179] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 000000006519e8cb [ 11.999191] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 00000000dbd10097 state to 000000003a20d61c [ 11.999204] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 0000000044ed77e0 state to 000000003a20d61c [ 11.999214] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 0000000044ed77e0 [ 11.999226] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000bf4f36f2 state to 000000003a20d61c [ 11.999237] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 00000000bf4f36f2 [ 11.999249] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 00000000386a8214 [ 11.999263] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003a20d61c [ 11.999278] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 000000004bb466d1 state to 000000003a20d61c [ 11.999290] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000004bb466d1 to [NOCRTC] [ 11.999300] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000004bb466d1 to [CRTC:51:pipe A] [ 11.999315] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 000000005e0f0145 state to 000000003a20d61c [ 11.999326] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 000000005e0f0145 [ 11.999337] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 00000000f0e4482c [ 11.999351] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000003a20d61c [ 11.999365] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 00000000149e8c45 state to 000000003a20d61c [ 11.999377] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 00000000149e8c45 [ 11.999389] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 00000000dbd10097 [ 11.999402] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000003a20d61c [ 11.999417] [drm:drm_atomic_check_only [drm]] checking 000000003a20d61c [ 11.999428] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 11.999436] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 11.999443] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 11.999457] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003a20d61c [ 11.999471] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 000000003a20d61c [ 11.999508] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 11.999545] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 24 pixel clock 108000KHz [ 11.999569] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 11.999600] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 11.999624] [drm:intel_dp_compute_config [i915]] DP link rate required 243000 available 270000 [ 11.999652] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 11.999685] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 11.999713] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 11.999745] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 11.999772] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 11.999797] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 11.999834] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 11.999862] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 11.999889] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 11.999916] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3774873, gmch_n: 4194304, link_m: 209715, link_n: 524288, tu: 64 [ 11.999943] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 11.999970] [drm:intel_dump_pipe_config [i915]] requested mode: [ 11.999985] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 12.000012] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 12.000024] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 12.000053] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 12.000080] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 12.000105] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 12.000131] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 12.000157] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 12.000182] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 12.000208] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 12.000234] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 12.000260] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 12.000287] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 12.000316] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 12.000343] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 12.000360] [drm:drm_atomic_commit [drm]] committing 000000003a20d61c [ 12.000407] [drm:intel_edp_backlight_off [i915]] [ 12.014109] audit: type=1400 audit(1570801072.742:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=654 comm="apparmor_parser" [ 12.014111] audit: type=1400 audit(1570801072.742:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=654 comm="apparmor_parser" [ 12.014113] audit: type=1400 audit(1570801072.742:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=654 comm="apparmor_parser" [ 12.014223] audit: type=1400 audit(1570801072.742:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=655 comm="apparmor_parser" [ 12.014226] audit: type=1400 audit(1570801072.742:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=655 comm="apparmor_parser" [ 12.014883] audit: type=1400 audit(1570801072.742:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/libvirtd" pid=653 comm="apparmor_parser" [ 12.014885] audit: type=1400 audit(1570801072.742:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/libvirtd//qemu_bridge_helper" pid=653 comm="apparmor_parser" [ 12.015293] audit: type=1400 audit(1570801072.742:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="virt-aa-helper" pid=652 comm="apparmor_parser" [ 12.016817] audit: type=1400 audit(1570801072.746:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/named" pid=657 comm="apparmor_parser" [ 12.098775] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 12.099524] Bridge firewalling registered [ 12.207761] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 12.207887] [drm:intel_disable_pipe [i915]] disabling pipe A [ 12.218879] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 12.218979] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 12.219097] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000 [ 12.270413] [drm:wait_panel_status [i915]] Wait complete [ 12.270512] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 12.270605] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 12.270692] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 12.270775] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 12.270867] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 12.270951] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 12.271033] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 12.271115] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 12.271198] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 12.271280] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 12.271360] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 12.271443] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 12.271518] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 12.271592] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 12.271736] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 12.891852] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 12.891956] [drm:wait_panel_status [i915]] Wait complete [ 12.892071] [drm:edp_panel_on [i915]] Wait for panel power on [ 12.892214] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 13.094472] [drm:wait_panel_status [i915]] Wait complete [ 13.094574] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 13.094690] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A] VDD on [ 13.094835] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 13.095990] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a [ 13.097003] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 13.097069] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 13.097132] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 13.097196] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 13.098792] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 13.098854] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 13.098916] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 13.100437] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 13.100451] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 13.100465] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 13.101943] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 13.101957] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 13.101971] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 13.103448] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 13.103463] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 270000, lane count = 1 [ 13.103478] [drm:intel_dp_get_link_train_fallback_values [i915]] Retrying Link training for eDP with same parameters [ 13.103946] [drm:intel_enable_pipe [i915]] enabling pipe A [ 13.103967] [drm:intel_edp_backlight_on [i915]] [ 13.103980] [drm:intel_panel_enable_backlight [i915]] pipe A [ 13.104073] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 13.104147] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 13.104167] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 13.104183] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 13.120909] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 13.121010] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 13.121126] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 13.121225] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000003a20d61c [ 13.121277] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000004d6c7238 [ 13.121319] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000003a20d61c [ 13.121365] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 00000000abf1ec0a state to 000000004d6c7238 [ 13.121447] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 13.121501] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 00000000ffbf4958 state to 000000004d6c7238 [ 13.121563] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 000000002efd5cdf state to 000000004d6c7238 [ 13.121612] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 000000002efd5cdf [ 13.121673] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000d0c67b43 state to 000000004d6c7238 [ 13.121723] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000d0c67b43 [ 13.121782] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 0000000075fdbd0f state to 000000004d6c7238 [ 13.121840] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 00000000cb325807 state to 000000004d6c7238 [ 13.121888] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 00000000cb325807 [ 13.121943] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 00000000d57b6a4e state to 000000004d6c7238 [ 13.121989] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 00000000d57b6a4e [ 13.122044] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 00000000015118e3 state to 000000004d6c7238 [ 13.122096] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 00000000c2cd0607 state to 000000004d6c7238 [ 13.122142] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 00000000c2cd0607 [ 13.122192] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 0000000020ec1c3d state to 000000004d6c7238 [ 13.122223] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 0000000020ec1c3d [ 13.122256] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 00000000abf1ec0a [ 13.122295] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000004d6c7238 [ 13.122337] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 00000000c8cc0494 state to 000000004d6c7238 [ 13.122369] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000c8cc0494 to [NOCRTC] [ 13.122401] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000c8cc0494 to [CRTC:51:pipe A] [ 13.122441] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 00000000e558efc2 state to 000000004d6c7238 [ 13.122472] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 00000000e558efc2 [ 13.122501] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 0000000075fdbd0f [ 13.122539] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000004d6c7238 [ 13.122580] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 00000000ee2c7cf5 state to 000000004d6c7238 [ 13.122610] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 00000000ee2c7cf5 [ 13.122638] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 00000000015118e3 [ 13.122676] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000004d6c7238 [ 13.122715] [drm:drm_atomic_check_only [drm]] checking 000000004d6c7238 [ 13.122744] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 13.122764] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 13.122783] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 13.122822] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000004d6c7238 [ 13.122862] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 000000004d6c7238 [ 13.122961] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 13.123062] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 24 pixel clock 108000KHz [ 13.123133] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 13.123202] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 13.123268] [drm:intel_dp_compute_config [i915]] DP link rate required 243000 available 270000 [ 13.123352] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 13.123444] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 13.123525] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 13.123621] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 13.123757] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 13.123872] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 13.124020] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 13.124132] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 13.124237] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 13.124365] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3774873, gmch_n: 4194304, link_m: 209715, link_n: 524288, tu: 64 [ 13.124486] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 13.124590] [drm:intel_dump_pipe_config [i915]] requested mode: [ 13.124637] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 13.124761] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 13.124815] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 13.124929] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 13.125034] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 13.125154] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 13.125275] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 13.125380] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 13.125502] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 13.125623] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 13.125734] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 13.125857] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 13.125981] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 13.126086] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 13.126210] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 13.126271] [drm:drm_atomic_commit [drm]] committing 000000004d6c7238 [ 13.126455] [drm:intel_edp_backlight_off [i915]] [ 13.331758] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 13.331909] [drm:intel_disable_pipe [i915]] disabling pipe A [ 13.337964] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 13.338081] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 13.338222] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000 [ 13.389156] [drm:wait_panel_status [i915]] Wait complete [ 13.389257] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 13.389349] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 13.389437] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 13.389518] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 13.389611] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 13.389693] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 13.389773] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 13.389856] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 13.389940] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 13.390022] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 13.390103] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 13.390186] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 13.390260] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 13.390335] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 13.390422] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 14.011853] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 14.011958] [drm:wait_panel_status [i915]] Wait complete [ 14.012079] [drm:edp_panel_on [i915]] Wait for panel power on [ 14.012222] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 14.214480] [drm:wait_panel_status [i915]] Wait complete [ 14.214582] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 14.214699] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A] VDD on [ 14.214841] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 14.215993] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a [ 14.216941] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 14.216956] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 14.216971] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 14.216986] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 14.218474] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 14.218488] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 14.218503] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 14.219983] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 14.219998] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 14.220013] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 14.221488] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 14.221503] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 14.221517] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 14.222995] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 14.223009] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 270000, lane count = 1 [ 14.223024] [drm:intel_dp_get_link_train_fallback_values [i915]] Retrying Link training for eDP with same parameters [ 14.223493] [drm:intel_enable_pipe [i915]] enabling pipe A [ 14.223513] [drm:intel_edp_backlight_on [i915]] [ 14.223526] [drm:intel_panel_enable_backlight [i915]] pipe A [ 14.223629] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 14.223710] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 14.223736] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 14.223756] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 14.240354] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 14.240387] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 14.240427] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 14.240466] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000004d6c7238 [ 14.240478] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 14.240491] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000004d6c7238 [ 14.240504] [drm:drm_client_modeset_probe [drm]] [ 14.240513] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 14.240545] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 14.240570] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 14.240594] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 14.240616] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 14.240638] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 14.242439] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 14.242456] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 14.242469] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 14.242575] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 14.242588] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 14.242600] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 14.242612] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 14.242623] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 14.242635] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 14.242646] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 14.242658] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 14.242669] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 14.242680] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 14.242691] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 14.242703] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 14.242714] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 14.242725] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 14.242736] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 14.242747] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 14.242758] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 14.242764] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 14.242789] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 14.243094] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 14.243117] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 14.243401] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 14.243444] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 14.243466] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 14.243487] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 14.247193] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 14.247219] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 14.247524] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 14.247549] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 14.247845] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 14.247884] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 14.247891] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 14.247897] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 14.247922] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 14.248226] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 14.248250] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 14.248533] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 14.248578] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 14.248602] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 14.248625] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 14.252312] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 14.252336] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 14.252637] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 14.252661] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 14.252945] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 14.252983] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 14.252989] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 14.253004] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 14.253017] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 14.253029] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 14.253043] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 14.253055] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 14.253067] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 14.253078] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 14.253090] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 14.253103] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 14.253124] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000003a20d61c [ 14.253141] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 0000000021e4292e state to 000000003a20d61c [ 14.253158] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 000000007c3ee9a8 state to 000000003a20d61c [ 14.253174] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000eaa2fa6c state to 000000003a20d61c [ 14.253187] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000eaa2fa6c [ 14.253202] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000bc9117b6 state to 000000003a20d61c [ 14.253214] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000bc9117b6 [ 14.253230] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 0000000072d60733 state to 000000003a20d61c [ 14.253245] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 0000000044a68901 state to 000000003a20d61c [ 14.253257] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 0000000044a68901 [ 14.253272] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 00000000f0e4482c state to 000000003a20d61c [ 14.253284] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 00000000f0e4482c [ 14.253299] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 00000000fc01e44c state to 000000003a20d61c [ 14.253314] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 00000000f7c0c117 state to 000000003a20d61c [ 14.253326] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 00000000f7c0c117 [ 14.253341] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000386a8214 state to 000000003a20d61c [ 14.253353] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 00000000386a8214 [ 14.253365] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 0000000021e4292e [ 14.253381] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003a20d61c [ 14.253397] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 000000003498ad83 state to 000000003a20d61c [ 14.253410] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000003498ad83 to [NOCRTC] [ 14.253422] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000003498ad83 to [CRTC:51:pipe A] [ 14.253437] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 0000000023932f2d state to 000000003a20d61c [ 14.253449] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 0000000023932f2d [ 14.253461] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 0000000072d60733 [ 14.253476] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000003a20d61c [ 14.253492] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 0000000011d63261 state to 000000003a20d61c [ 14.253504] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 0000000011d63261 [ 14.253516] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 00000000fc01e44c [ 14.253531] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000003a20d61c [ 14.253547] [drm:drm_atomic_check_only [drm]] checking 000000003a20d61c [ 14.253557] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 14.253566] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 14.253606] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 0, on 0, ms 0 [ 14.253632] [drm:drm_atomic_commit [drm]] committing 000000003a20d61c [ 14.256882] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000003a20d61c [ 14.256900] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000003a20d61c [ 14.256933] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 14.256963] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 14.256982] [drm:drm_client_modeset_probe [drm]] [ 14.256993] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 14.257035] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 14.257079] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 14.257124] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 14.257167] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 14.257208] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 14.259023] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 14.259048] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 14.259065] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 14.259182] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 14.259197] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 14.259211] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 14.259225] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 14.259239] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 14.259252] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 14.259266] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 14.259279] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 14.259292] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 14.259304] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 14.259317] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 14.259330] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 14.259342] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 14.259355] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 14.259369] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 14.259382] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 14.259394] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 14.259401] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 14.259435] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 14.259750] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 14.259777] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 14.260064] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 14.260110] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 14.260137] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 14.260162] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 14.263898] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 14.263946] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 14.264275] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 14.264315] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 14.264621] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 14.264664] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 14.264676] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 14.264688] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 14.264727] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 14.265051] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 14.265083] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 14.265384] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 14.265438] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 14.265474] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 14.265510] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 14.269297] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 14.269341] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 14.269671] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 14.269703] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 14.275931] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 14.275959] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 14.275967] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 14.275985] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 14.275998] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 14.276011] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 14.276025] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 14.276038] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 14.276050] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 14.276062] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 14.276074] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 14.276088] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 14.276107] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000007fd82c85 [ 14.276125] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 000000001bc7970f state to 000000007fd82c85 [ 14.276141] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 00000000a16e100a state to 000000007fd82c85 [ 14.276157] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000839f11f9 state to 000000007fd82c85 [ 14.276170] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000839f11f9 [ 14.276185] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000d082a5da state to 000000007fd82c85 [ 14.276197] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000d082a5da [ 14.276213] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 0000000000b926fe state to 000000007fd82c85 [ 14.276230] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 00000000a8b02937 state to 000000007fd82c85 [ 14.276242] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 00000000a8b02937 [ 14.276257] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 00000000f1d5acf0 state to 000000007fd82c85 [ 14.276270] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 00000000f1d5acf0 [ 14.276285] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 00000000638ed409 state to 000000007fd82c85 [ 14.276301] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 000000000088b352 state to 000000007fd82c85 [ 14.276312] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 000000000088b352 [ 14.276328] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 0000000034b3e7d2 state to 000000007fd82c85 [ 14.276339] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 0000000034b3e7d2 [ 14.276352] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 000000001bc7970f [ 14.276368] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000007fd82c85 [ 14.276385] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 00000000938e6b76 state to 000000007fd82c85 [ 14.276397] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000938e6b76 to [NOCRTC] [ 14.276410] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000938e6b76 to [CRTC:51:pipe A] [ 14.276437] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 000000004f49daf4 state to 000000007fd82c85 [ 14.276470] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 000000004f49daf4 [ 14.276480] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 0000000000b926fe [ 14.276494] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000007fd82c85 [ 14.276515] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 00000000406ad1cd state to 000000007fd82c85 [ 14.276532] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 00000000406ad1cd [ 14.276548] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 00000000638ed409 [ 14.276568] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000007fd82c85 [ 14.276588] [drm:drm_atomic_check_only [drm]] checking 000000007fd82c85 [ 14.276601] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 14.276611] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 14.276619] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 14.276633] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000007fd82c85 [ 14.276646] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 000000007fd82c85 [ 14.276682] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 14.276717] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 24 pixel clock 108000KHz [ 14.276741] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 14.276764] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 14.276787] [drm:intel_dp_compute_config [i915]] DP link rate required 243000 available 270000 [ 14.276816] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 14.276848] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 14.276875] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 14.276920] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 14.276956] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 14.276994] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 14.277048] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 14.277089] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 14.277130] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 14.277164] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3774873, gmch_n: 4194304, link_m: 209715, link_n: 524288, tu: 64 [ 14.277193] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 14.277222] [drm:intel_dump_pipe_config [i915]] requested mode: [ 14.277236] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 14.277267] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 14.277284] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 14.277316] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 14.277354] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 14.277390] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 14.277427] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 14.277466] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 14.277501] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 14.277537] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 14.277574] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 14.277609] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 14.277645] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 14.277681] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 14.277716] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 14.277746] [drm:drm_atomic_commit [drm]] committing 000000007fd82c85 [ 14.277810] [drm:intel_edp_backlight_off [i915]] [ 14.343533] backend: port 1(backend-dev) entered blocking state [ 14.343534] backend: port 1(backend-dev) entered disabled state [ 14.343611] device backend-dev entered promiscuous mode [ 14.346344] backend: port 1(backend-dev) entered blocking state [ 14.346345] backend: port 1(backend-dev) entered forwarding state [ 14.483629] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 14.483708] [drm:intel_disable_pipe [i915]] disabling pipe A [ 14.491909] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 14.491960] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 14.492038] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000 [ 14.542349] [drm:wait_panel_status [i915]] Wait complete [ 14.542487] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 14.542602] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 14.542696] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 14.542808] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 14.542928] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 14.543036] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 14.543132] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 14.543244] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 14.543334] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 14.543444] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 14.543554] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 14.543663] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 14.543812] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 14.543935] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 14.544048] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 15.163839] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 15.163940] [drm:wait_panel_status [i915]] Wait complete [ 15.164054] [drm:edp_panel_on [i915]] Wait for panel power on [ 15.164194] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 15.355695] IPv6: ADDRCONF(NETDEV_CHANGE): backend: link becomes ready [ 15.366467] [drm:wait_panel_status [i915]] Wait complete [ 15.366570] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 15.366687] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A] VDD on [ 15.366833] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 15.368001] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a [ 15.368938] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 15.368953] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 15.368968] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 15.368984] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 15.370469] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 15.370484] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 15.370498] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 15.371977] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 15.371992] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 15.372007] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 15.373487] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 15.373502] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 15.373516] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 15.374993] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 15.375007] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 270000, lane count = 1 [ 15.375023] [drm:intel_dp_get_link_train_fallback_values [i915]] Retrying Link training for eDP with same parameters [ 15.375491] [drm:intel_enable_pipe [i915]] enabling pipe A [ 15.375511] [drm:intel_edp_backlight_on [i915]] [ 15.375524] [drm:intel_panel_enable_backlight [i915]] pipe A [ 15.375627] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 15.375710] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 15.375736] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 15.375753] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 15.392369] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 15.392399] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 15.392435] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 15.392468] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000007fd82c85 [ 15.392484] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000007fd82c85 [ 15.392510] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 15.392535] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 15.392545] [drm:drm_client_modeset_probe [drm]] [ 15.392552] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 15.392576] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 15.392602] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 15.392626] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 15.392651] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 15.392676] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 15.394485] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 15.394501] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 15.394513] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 15.394611] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 15.394623] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 15.394634] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 15.394644] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 15.394654] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 15.394664] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 15.394674] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 15.394685] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 15.394694] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 15.394705] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 15.394715] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 15.394725] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 15.394735] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 15.394745] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 15.394755] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 15.394765] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 15.394774] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 15.394780] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 15.394806] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 15.395113] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 15.395133] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 15.395410] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 15.395452] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 15.395473] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 15.395493] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 15.399150] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 15.399171] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 15.399470] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 15.399490] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 15.399784] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 15.399823] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 15.399830] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 15.399836] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 15.399858] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 15.400159] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 15.400180] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 15.400461] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 15.400505] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 15.400527] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 15.400548] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 15.404212] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 15.404235] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 15.404536] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 15.404557] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 15.404838] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 15.404872] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 15.404877] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 15.404890] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 15.404902] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 15.404914] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 15.404926] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 15.404937] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 15.404948] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 15.404958] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 15.404969] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 15.404980] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 15.404997] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000003485c434 [ 15.405011] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 00000000f3f95346 state to 000000003485c434 [ 15.405026] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 0000000011427eab state to 000000003485c434 [ 15.405040] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000fa372086 state to 000000003485c434 [ 15.405051] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000fa372086 [ 15.405064] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000a585c0b6 state to 000000003485c434 [ 15.405075] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000a585c0b6 [ 15.405088] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 00000000921a1b14 state to 000000003485c434 [ 15.405101] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 00000000e1bf132c state to 000000003485c434 [ 15.405112] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 00000000e1bf132c [ 15.405125] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 00000000f859f70e state to 000000003485c434 [ 15.405135] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 00000000f859f70e [ 15.405149] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 000000006b595243 state to 000000003485c434 [ 15.405162] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 0000000077110ea9 state to 000000003485c434 [ 15.405173] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 0000000077110ea9 [ 15.405186] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000292e9210 state to 000000003485c434 [ 15.405197] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 00000000292e9210 [ 15.405208] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 00000000f3f95346 [ 15.405222] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003485c434 [ 15.405236] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 000000008550bac3 state to 000000003485c434 [ 15.405246] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000008550bac3 to [NOCRTC] [ 15.405257] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000008550bac3 to [CRTC:51:pipe A] [ 15.405271] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 00000000a0ee22dd state to 000000003485c434 [ 15.405281] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 00000000a0ee22dd [ 15.405291] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 00000000921a1b14 [ 15.405305] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000003485c434 [ 15.405319] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 00000000191f30ea state to 000000003485c434 [ 15.405330] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 00000000191f30ea [ 15.405340] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 000000006b595243 [ 15.405353] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000003485c434 [ 15.405367] [drm:drm_atomic_check_only [drm]] checking 000000003485c434 [ 15.405376] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 15.405384] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 15.405391] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 15.405405] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003485c434 [ 15.405418] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 000000003485c434 [ 15.405451] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 15.405485] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 24 pixel clock 108000KHz [ 15.405509] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 15.405533] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 15.405556] [drm:intel_dp_compute_config [i915]] DP link rate required 243000 available 270000 [ 15.405585] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 15.405617] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 15.405645] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 15.405677] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 15.405706] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 15.405732] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 15.405768] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 15.405797] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 15.405824] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 15.405851] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3774873, gmch_n: 4194304, link_m: 209715, link_n: 524288, tu: 64 [ 15.405879] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 15.405906] [drm:intel_dump_pipe_config [i915]] requested mode: [ 15.405920] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 15.405947] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 15.405960] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 15.405989] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 15.406016] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 15.406043] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 15.406070] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 15.406097] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 15.406124] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 15.406151] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 15.406179] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 15.406206] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 15.406234] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 15.406261] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 15.406288] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 15.406304] [drm:drm_atomic_commit [drm]] committing 000000003485c434 [ 15.406348] [drm:intel_edp_backlight_off [i915]] [ 15.611762] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 15.611910] [drm:intel_disable_pipe [i915]] disabling pipe A [ 15.626933] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 15.627051] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 15.627195] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000002 control 00000000 [ 15.679788] [drm:wait_panel_status [i915]] Wait complete [ 15.679883] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 15.679972] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 15.680054] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 15.680135] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 15.680223] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 15.680302] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 15.680381] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 15.680459] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 15.680539] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 15.680617] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 15.680695] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 15.680775] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 15.680847] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 15.680918] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 15.681002] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 16.315845] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 16.315946] [drm:wait_panel_status [i915]] Wait complete [ 16.316061] [drm:edp_panel_on [i915]] Wait for panel power on [ 16.316202] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 16.517054] [drm:wait_panel_status [i915]] Wait complete [ 16.517155] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 16.517274] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A] VDD on [ 16.517443] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 16.518593] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a [ 16.519707] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 16.519807] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 16.519901] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 16.519999] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 16.521656] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 16.521723] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 16.521788] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 16.523315] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 16.523330] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 16.523345] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 16.524824] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 16.524839] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 16.524854] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 16.526334] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 16.526349] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 270000, lane count = 1 [ 16.526365] [drm:intel_dp_get_link_train_fallback_values [i915]] Retrying Link training for eDP with same parameters [ 16.526832] [drm:intel_enable_pipe [i915]] enabling pipe A [ 16.526853] [drm:intel_edp_backlight_on [i915]] [ 16.526867] [drm:intel_panel_enable_backlight [i915]] pipe A [ 16.526958] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 16.527032] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 16.527052] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 16.527068] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 16.543691] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 16.543722] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 16.543761] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 16.543796] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000003485c434 [ 16.543814] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000003485c434 [ 16.543841] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 16.543866] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 16.543877] [drm:drm_client_modeset_probe [drm]] [ 16.543884] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 16.543910] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 16.543936] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 16.543961] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 16.543987] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 16.544012] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 16.545826] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 16.545841] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 16.545853] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 16.545949] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 16.545961] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 16.545972] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 16.545982] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 16.545993] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 16.546003] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 16.546013] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 16.546023] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 16.546034] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 16.546043] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 16.546053] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 16.546063] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 16.546073] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 16.546083] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 16.546093] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 16.546103] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 16.546113] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 16.546119] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 16.546145] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 16.546451] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 16.546472] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 16.546749] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 16.546790] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 16.546810] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 16.546830] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 16.550575] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 16.550605] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 16.550927] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 16.550956] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 16.551254] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 16.551294] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 16.551303] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 16.551313] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 16.551345] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 16.551672] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 16.551704] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 16.552000] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 16.552050] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 16.552082] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 16.552111] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 16.555865] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 16.555899] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 16.556217] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 16.556249] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 16.556543] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 16.556584] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 16.556593] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 16.556609] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 16.556624] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 16.556642] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 16.556660] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 16.556676] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 16.556692] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 16.556707] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 16.556721] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 16.556738] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 16.556761] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000003485c434 [ 16.556781] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 00000000fc422665 state to 000000003485c434 [ 16.556802] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 00000000aea07571 state to 000000003485c434 [ 16.556819] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000c0058c84 state to 000000003485c434 [ 16.556836] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000c0058c84 [ 16.556855] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000427abb90 state to 000000003485c434 [ 16.556871] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000427abb90 [ 16.556891] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 000000009e40c447 state to 000000003485c434 [ 16.556908] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 000000008a0b1ad5 state to 000000003485c434 [ 16.556922] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 000000008a0b1ad5 [ 16.556942] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 00000000188a8506 state to 000000003485c434 [ 16.556957] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 00000000188a8506 [ 16.556977] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 0000000000b926fe state to 000000003485c434 [ 16.556997] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 00000000d082a5da state to 000000003485c434 [ 16.557011] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 00000000d082a5da [ 16.557027] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000839f11f9 state to 000000003485c434 [ 16.557043] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 00000000839f11f9 [ 16.557060] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 00000000fc422665 [ 16.557079] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003485c434 [ 16.557100] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 0000000042c9afcc state to 000000003485c434 [ 16.557115] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 0000000042c9afcc to [NOCRTC] [ 16.557130] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 0000000042c9afcc to [CRTC:51:pipe A] [ 16.557150] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 00000000fad23bb8 state to 000000003485c434 [ 16.557166] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 00000000fad23bb8 [ 16.557181] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 000000009e40c447 [ 16.557201] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000003485c434 [ 16.557220] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 0000000012b9aec8 state to 000000003485c434 [ 16.557234] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 0000000012b9aec8 [ 16.557249] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 0000000000b926fe [ 16.557268] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000003485c434 [ 16.557288] [drm:drm_atomic_check_only [drm]] checking 000000003485c434 [ 16.557301] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 16.557312] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 16.557320] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 16.557337] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003485c434 [ 16.557356] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 000000003485c434 [ 16.557402] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 16.557445] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 24 pixel clock 108000KHz [ 16.557475] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 16.557509] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 16.557542] [drm:intel_dp_compute_config [i915]] DP link rate required 243000 available 270000 [ 16.557578] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 16.557618] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 16.557658] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 16.557704] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 16.557737] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 16.557774] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 16.557824] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 16.557859] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 16.557898] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 16.557938] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3774873, gmch_n: 4194304, link_m: 209715, link_n: 524288, tu: 64 [ 16.557970] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 16.558003] [drm:intel_dump_pipe_config [i915]] requested mode: [ 16.558023] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 16.558061] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 16.558080] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 16.558114] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 16.558147] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 16.558187] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 16.558226] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 16.558258] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 16.558291] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 16.558330] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 16.558370] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 16.558402] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 16.558436] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 16.558474] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 16.558512] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 16.558530] [drm:drm_atomic_commit [drm]] committing 000000003485c434 [ 16.558589] [drm:intel_edp_backlight_off [i915]] [ 16.677198] frontend: port 1(frontend-dev) entered blocking state [ 16.677200] frontend: port 1(frontend-dev) entered disabled state [ 16.677267] device frontend-dev entered promiscuous mode [ 16.683188] frontend: port 1(frontend-dev) entered blocking state [ 16.683191] frontend: port 1(frontend-dev) entered forwarding state [ 16.763766] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 16.763913] [drm:intel_disable_pipe [i915]] disabling pipe A [ 16.778936] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 16.779055] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 16.779200] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000002 control 00000000 [ 16.830339] [drm:wait_panel_status [i915]] Wait complete [ 16.830469] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 16.830592] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 16.830699] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 16.830780] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 16.830871] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 16.830952] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 16.831038] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 16.831150] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 16.831263] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 16.831377] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 16.831493] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 16.831611] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 16.831774] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 16.831895] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 16.832016] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 17.467846] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 17.467950] [drm:wait_panel_status [i915]] Wait complete [ 17.468065] [drm:edp_panel_on [i915]] Wait for panel power on [ 17.468207] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 17.669141] [drm:wait_panel_status [i915]] Wait complete [ 17.669242] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 17.669353] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A] VDD on [ 17.669501] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 17.670631] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a [ 17.671633] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 17.671732] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 17.671800] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 17.671875] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 17.673395] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 17.673410] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 17.673424] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 17.674903] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 17.674917] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 17.674931] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 17.676414] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 17.676428] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 17.676442] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 17.677920] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 17.677935] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 270000, lane count = 1 [ 17.677950] [drm:intel_dp_get_link_train_fallback_values [i915]] Retrying Link training for eDP with same parameters [ 17.678418] [drm:intel_enable_pipe [i915]] enabling pipe A [ 17.678438] [drm:intel_edp_backlight_on [i915]] [ 17.678452] [drm:intel_panel_enable_backlight [i915]] pipe A [ 17.678542] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 17.678617] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 17.678636] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 17.678653] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 17.691695] IPv6: ADDRCONF(NETDEV_CHANGE): frontend: link becomes ready [ 17.695302] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 17.695334] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 17.695375] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 17.695410] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000003485c434 [ 17.695427] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000003485c434 [ 17.695456] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 17.695482] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 17.695494] [drm:drm_client_modeset_probe [drm]] [ 17.695501] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 17.695529] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 17.695555] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 17.695584] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 17.695624] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 17.695660] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 17.697490] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 17.697508] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 17.697521] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 17.697630] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 17.697643] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 17.697656] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 17.697668] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 17.697680] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 17.697691] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 17.697703] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 17.697715] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 17.697726] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 17.697738] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 17.697749] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 17.697760] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 17.697771] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 17.697783] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 17.697794] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 17.697805] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 17.697816] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 17.697823] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 17.697853] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 17.698164] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 17.698187] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 17.698469] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 17.698512] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 17.698535] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 17.698556] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 17.702245] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 17.702268] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 17.702571] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 17.702591] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 17.702870] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 17.702908] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 17.702915] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 17.702921] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 17.702942] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 17.703241] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 17.703262] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 17.703541] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 17.703598] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 17.703627] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 17.703654] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 17.707400] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 17.707441] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 17.707857] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 17.707891] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 17.708192] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 17.708236] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 17.708246] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 17.708267] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 17.708283] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 17.708299] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 17.708318] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 17.708335] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 17.708350] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 17.708367] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 17.708383] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 17.708401] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 17.708426] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000003485c434 [ 17.708448] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 000000002266f4d6 state to 000000003485c434 [ 17.708469] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 00000000191f30ea state to 000000003485c434 [ 17.708489] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000165be69d state to 000000003485c434 [ 17.708506] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000165be69d [ 17.708526] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000292e9210 state to 000000003485c434 [ 17.708541] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000292e9210 [ 17.708560] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 0000000077110ea9 state to 000000003485c434 [ 17.708580] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 000000006b595243 state to 000000003485c434 [ 17.708597] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 000000006b595243 [ 17.708616] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 00000000f859f70e state to 000000003485c434 [ 17.708633] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 00000000f859f70e [ 17.708652] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 00000000e1bf132c state to 000000003485c434 [ 17.708666] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 00000000921a1b14 state to 000000003485c434 [ 17.708677] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 00000000921a1b14 [ 17.708690] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000a585c0b6 state to 000000003485c434 [ 17.708701] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 00000000a585c0b6 [ 17.708712] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 000000002266f4d6 [ 17.708726] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003485c434 [ 17.708741] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 000000003547222f state to 000000003485c434 [ 17.708752] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000003547222f to [NOCRTC] [ 17.708762] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000003547222f to [CRTC:51:pipe A] [ 17.708776] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 00000000a0ee22dd state to 000000003485c434 [ 17.708787] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 00000000a0ee22dd [ 17.708797] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 0000000077110ea9 [ 17.708810] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000003485c434 [ 17.708825] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 0000000011427eab state to 000000003485c434 [ 17.708836] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 0000000011427eab [ 17.708846] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 00000000e1bf132c [ 17.708859] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000003485c434 [ 17.708873] [drm:drm_atomic_check_only [drm]] checking 000000003485c434 [ 17.708884] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 17.708891] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 17.708898] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 17.708912] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003485c434 [ 17.708925] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 000000003485c434 [ 17.708960] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 17.708996] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 24 pixel clock 108000KHz [ 17.709022] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 17.709045] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 17.709069] [drm:intel_dp_compute_config [i915]] DP link rate required 243000 available 270000 [ 17.709098] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 17.709130] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 17.709159] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 17.709192] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 17.709220] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 17.709246] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 17.709284] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 17.709312] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 17.709340] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 17.709367] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3774873, gmch_n: 4194304, link_m: 209715, link_n: 524288, tu: 64 [ 17.709394] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 17.709421] [drm:intel_dump_pipe_config [i915]] requested mode: [ 17.709435] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 17.709462] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 17.709475] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 17.709504] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 17.709531] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 17.709558] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 17.709585] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 17.709612] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 17.709639] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 17.709666] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 17.709694] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 17.709720] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 17.709748] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 17.709774] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 17.709801] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 17.709816] [drm:drm_atomic_commit [drm]] committing 000000003485c434 [ 17.709861] [drm:intel_edp_backlight_off [i915]] [ 17.915724] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 17.915887] [drm:intel_disable_pipe [i915]] disabling pipe A [ 17.930878] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 17.930979] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 17.931097] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000 [ 17.982431] [drm:wait_panel_status [i915]] Wait complete [ 17.982530] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 17.982622] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 17.982709] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 17.982793] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 17.982885] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 17.982969] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 17.983051] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 17.983134] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 17.983218] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 17.983300] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 17.983380] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 17.983463] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 17.983539] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 17.983624] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 17.983749] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 18.619837] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 18.619936] [drm:wait_panel_status [i915]] Wait complete [ 18.620050] [drm:edp_panel_on [i915]] Wait for panel power on [ 18.620190] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 18.822461] [drm:wait_panel_status [i915]] Wait complete [ 18.822563] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 18.822678] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A] VDD on [ 18.822824] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 18.823965] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a [ 18.824903] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 18.824918] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 18.824933] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 18.824948] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 18.826434] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 18.826448] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 18.826463] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 18.827942] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 18.827958] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 18.827973] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 18.829453] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 18.829468] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 18.829482] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 18.830958] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 18.830972] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 270000, lane count = 1 [ 18.830987] [drm:intel_dp_get_link_train_fallback_values [i915]] Retrying Link training for eDP with same parameters [ 18.831456] [drm:intel_enable_pipe [i915]] enabling pipe A [ 18.831476] [drm:intel_edp_backlight_on [i915]] [ 18.831489] [drm:intel_panel_enable_backlight [i915]] pipe A [ 18.831584] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 18.831672] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 18.831692] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 18.831709] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 18.848336] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 18.848372] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 18.848417] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 18.848456] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000003485c434 [ 18.848475] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000003485c434 [ 18.848507] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 18.848540] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 18.848557] [drm:drm_client_modeset_probe [drm]] [ 18.848569] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 18.848607] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 18.848645] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 18.848681] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 18.848718] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 18.848756] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 18.850568] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 18.850585] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 18.850598] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 18.850707] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 18.850720] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 18.850732] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 18.850743] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 18.850755] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 18.850766] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 18.850778] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 18.850789] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 18.850800] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 18.850812] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 18.850823] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 18.850834] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 18.850845] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 18.850856] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 18.850867] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 18.850879] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 18.850890] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 18.850896] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 18.850926] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 18.851236] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 18.851260] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 18.851545] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 18.851606] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 18.851639] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 18.851672] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 18.855378] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 18.855408] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 18.855718] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 18.855745] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 18.856031] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 18.856072] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 18.856079] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 18.856086] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 18.856112] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 18.856416] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 18.856440] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 18.856727] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 18.856774] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 18.856798] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 18.856822] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 18.860517] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 18.860543] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 18.860848] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 18.860872] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 18.861155] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 18.861194] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 18.861201] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 18.861216] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 18.861229] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 18.861242] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 18.861256] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 18.861269] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 18.861281] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 18.861293] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 18.861304] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 18.861317] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 18.861336] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000003485c434 [ 18.861353] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 000000008a0b1ad5 state to 000000003485c434 [ 18.861370] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 0000000012b9aec8 state to 000000003485c434 [ 18.861386] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 000000009e40c447 state to 000000003485c434 [ 18.861399] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 000000009e40c447 [ 18.861414] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000427abb90 state to 000000003485c434 [ 18.861427] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000427abb90 [ 18.861442] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 00000000c0058c84 state to 000000003485c434 [ 18.861458] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 00000000fc422665 state to 000000003485c434 [ 18.861470] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 00000000fc422665 [ 18.861485] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 00000000f3f95346 state to 000000003485c434 [ 18.861497] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 00000000f3f95346 [ 18.861512] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 00000000fa372086 state to 000000003485c434 [ 18.861527] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 000000001bc7970f state to 000000003485c434 [ 18.861539] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 000000001bc7970f [ 18.861554] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000839f11f9 state to 000000003485c434 [ 18.861566] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 00000000839f11f9 [ 18.861578] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 000000008a0b1ad5 [ 18.861594] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003485c434 [ 18.861610] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 000000000b6ae755 state to 000000003485c434 [ 18.861623] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000000b6ae755 to [NOCRTC] [ 18.861635] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000000b6ae755 to [CRTC:51:pipe A] [ 18.861651] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 00000000fad23bb8 state to 000000003485c434 [ 18.861663] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 00000000fad23bb8 [ 18.861675] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 00000000c0058c84 [ 18.861690] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000003485c434 [ 18.861706] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 00000000aea07571 state to 000000003485c434 [ 18.861718] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 00000000aea07571 [ 18.861730] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 00000000fa372086 [ 18.861746] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000003485c434 [ 18.861761] [drm:drm_atomic_check_only [drm]] checking 000000003485c434 [ 18.861773] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 18.861781] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 18.861789] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 18.861805] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003485c434 [ 18.861820] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 000000003485c434 [ 18.861858] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 18.861896] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 24 pixel clock 108000KHz [ 18.861924] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 18.861951] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 18.861977] [drm:intel_dp_compute_config [i915]] DP link rate required 243000 available 270000 [ 18.862010] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 18.862047] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 18.862079] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 18.862117] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 18.862148] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 18.862178] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 18.862220] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 18.862253] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 18.862286] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 18.862318] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3774873, gmch_n: 4194304, link_m: 209715, link_n: 524288, tu: 64 [ 18.862350] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 18.862381] [drm:intel_dump_pipe_config [i915]] requested mode: [ 18.862396] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 18.862428] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 18.862442] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 18.862475] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 18.862507] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 18.862539] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 18.862570] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 18.862602] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 18.862633] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 18.862664] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 18.862696] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 18.862727] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 18.862758] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 18.862789] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 18.862820] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 18.862837] [drm:drm_atomic_commit [drm]] committing 000000003485c434 [ 18.862887] [drm:intel_edp_backlight_off [i915]] [ 18.892492] public: port 1(enp0s31f6) entered blocking state [ 18.892494] public: port 1(enp0s31f6) entered disabled state [ 18.892562] device enp0s31f6 entered promiscuous mode [ 19.067699] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 19.067783] [drm:intel_disable_pipe [i915]] disabling pipe A [ 19.082816] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 19.082892] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 19.082997] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000 [ 19.133102] [drm:wait_panel_status [i915]] Wait complete [ 19.133200] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 19.133292] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 19.133380] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 19.133462] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 19.133554] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 19.133637] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 19.133718] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 19.133801] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 19.133886] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 19.133969] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 19.134050] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 19.134132] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 19.134207] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 19.134281] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 19.134371] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 19.739851] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 19.739956] [drm:wait_panel_status [i915]] Wait complete [ 19.740074] [drm:edp_panel_on [i915]] Wait for panel power on [ 19.740217] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 19.942470] [drm:wait_panel_status [i915]] Wait complete [ 19.942574] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 19.942692] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A] VDD on [ 19.942835] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 19.943976] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a [ 19.944914] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 19.944929] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 19.944943] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 19.944959] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 19.946449] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 19.946464] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 19.946478] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 19.947958] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 19.947972] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 19.947987] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 19.949468] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 19.949482] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 19.949496] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 19.950971] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 19.950986] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 270000, lane count = 1 [ 19.951001] [drm:intel_dp_get_link_train_fallback_values [i915]] Retrying Link training for eDP with same parameters [ 19.951468] [drm:intel_enable_pipe [i915]] enabling pipe A [ 19.951489] [drm:intel_edp_backlight_on [i915]] [ 19.951502] [drm:intel_panel_enable_backlight [i915]] pipe A [ 19.951604] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 19.951685] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 19.951708] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 19.951730] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 19.968351] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 19.968388] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 19.968433] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 19.968471] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000003485c434 [ 19.968490] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000003485c434 [ 19.968522] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 19.968552] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 19.968566] [drm:drm_client_modeset_probe [drm]] [ 19.968574] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 19.968607] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 19.968638] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 19.968669] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 19.968701] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 19.968730] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 19.970548] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 19.970565] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 19.970578] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 19.970687] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 19.970700] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 19.970712] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 19.970724] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 19.970736] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 19.970747] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 19.970759] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 19.970770] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 19.970781] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 19.970793] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 19.970804] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 19.970816] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 19.970827] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 19.970838] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 19.970849] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 19.970860] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 19.970872] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 19.970878] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 19.970907] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 19.971216] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 19.971239] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 19.971519] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 19.971559] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 19.971587] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 19.971632] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 19.975322] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 19.975351] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 19.975667] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 19.975693] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 19.975978] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 19.976018] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 19.976025] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 19.976033] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 19.976058] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 19.976364] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 19.976388] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 19.976674] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 19.976719] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 19.976744] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 19.976768] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 19.980437] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 19.980461] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 19.980766] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 19.980790] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 19.981074] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 19.981113] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 19.981119] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 19.981134] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 19.981147] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 19.981160] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 19.981174] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 19.981187] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 19.981199] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 19.981211] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 19.981223] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 19.981237] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 19.981256] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000003485c434 [ 19.981273] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 00000000f7c0c117 state to 000000003485c434 [ 19.981289] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 0000000011427eab state to 000000003485c434 [ 19.981306] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000fc01e44c state to 000000003485c434 [ 19.981318] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000fc01e44c [ 19.981334] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000f0e4482c state to 000000003485c434 [ 19.981346] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000f0e4482c [ 19.981362] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 0000000044a68901 state to 000000003485c434 [ 19.981377] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 00000000188a8506 state to 000000003485c434 [ 19.981389] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 00000000188a8506 [ 19.981404] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 00000000a585c0b6 state to 000000003485c434 [ 19.981416] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 00000000a585c0b6 [ 19.981432] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 00000000921a1b14 state to 000000003485c434 [ 19.981447] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 00000000e1bf132c state to 000000003485c434 [ 19.981459] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 00000000e1bf132c [ 19.981474] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000f859f70e state to 000000003485c434 [ 19.981486] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 00000000f859f70e [ 19.981499] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 00000000f7c0c117 [ 19.981515] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003485c434 [ 19.981531] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 00000000f8108133 state to 000000003485c434 [ 19.981544] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000f8108133 to [NOCRTC] [ 19.981556] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000f8108133 to [CRTC:51:pipe A] [ 19.981572] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 00000000a0ee22dd state to 000000003485c434 [ 19.981584] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 00000000a0ee22dd [ 19.981597] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 0000000044a68901 [ 19.981612] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000003485c434 [ 19.981629] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 00000000191f30ea state to 000000003485c434 [ 19.981641] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 00000000191f30ea [ 19.981653] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 00000000921a1b14 [ 19.981668] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000003485c434 [ 19.981684] [drm:drm_atomic_check_only [drm]] checking 000000003485c434 [ 19.981695] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 19.981703] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 19.981712] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 19.981727] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003485c434 [ 19.981743] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 000000003485c434 [ 19.981781] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 19.981820] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 24 pixel clock 108000KHz [ 19.981848] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 19.981875] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 19.981901] [drm:intel_dp_compute_config [i915]] DP link rate required 243000 available 270000 [ 19.981935] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 19.981972] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 19.982004] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 19.982042] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 19.982074] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 19.982104] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 19.982146] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 19.982179] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 19.982210] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 19.982242] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3774873, gmch_n: 4194304, link_m: 209715, link_n: 524288, tu: 64 [ 19.982273] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 19.982304] [drm:intel_dump_pipe_config [i915]] requested mode: [ 19.982320] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 19.982351] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 19.982366] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 19.982398] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 19.982430] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 19.982461] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 19.982493] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 19.982524] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 19.982555] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 19.982586] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 19.982618] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 19.982650] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 19.982682] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 19.982713] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 19.982743] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 19.982761] [drm:drm_atomic_commit [drm]] committing 000000003485c434 [ 19.982810] [drm:intel_edp_backlight_off [i915]] [ 20.187755] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 20.187903] [drm:intel_disable_pipe [i915]] disabling pipe A [ 20.202934] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 20.203057] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 20.203199] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000002 control 00000000 [ 20.255789] [drm:wait_panel_status [i915]] Wait complete [ 20.255887] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 20.255979] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 20.256064] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 20.256145] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 20.256237] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 20.256321] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 20.256403] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 20.256485] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 20.256569] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 20.256652] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 20.256733] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 20.256816] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 20.256893] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 20.256966] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 20.257055] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 20.891848] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 20.891951] [drm:wait_panel_status [i915]] Wait complete [ 20.892067] [drm:edp_panel_on [i915]] Wait for panel power on [ 20.892208] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 21.093135] [drm:wait_panel_status [i915]] Wait complete [ 21.093236] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 21.093352] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A] VDD on [ 21.093498] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 21.094634] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a [ 21.095692] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 21.095776] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 21.095860] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 21.095940] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 21.097451] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 21.097465] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 21.097480] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 21.098957] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 21.098972] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 21.098986] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 21.100467] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 21.100482] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 21.100496] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 21.101974] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 21.101988] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 270000, lane count = 1 [ 21.102004] [drm:intel_dp_get_link_train_fallback_values [i915]] Retrying Link training for eDP with same parameters [ 21.102471] [drm:intel_enable_pipe [i915]] enabling pipe A [ 21.102492] [drm:intel_edp_backlight_on [i915]] [ 21.102505] [drm:intel_panel_enable_backlight [i915]] pipe A [ 21.102598] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 21.102672] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 21.102691] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 21.102708] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 21.119351] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 21.119385] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 21.119425] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 21.119460] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000003485c434 [ 21.119477] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000003485c434 [ 21.119506] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 21.119534] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 21.119545] [drm:drm_client_modeset_probe [drm]] [ 21.119552] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 21.119581] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 21.119628] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 21.119662] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 21.119694] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 21.119732] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 21.121557] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 21.121575] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 21.121588] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 21.121698] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 21.121711] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 21.121723] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 21.121735] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 21.121746] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 21.121758] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 21.121769] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 21.121780] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 21.121792] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 21.121803] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 21.121814] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 21.121825] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 21.121837] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 21.121848] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 21.121859] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 21.121870] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 21.121881] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 21.121888] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 21.121916] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 21.122227] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 21.122250] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 21.122531] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 21.122574] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 21.122596] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 21.122618] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 21.126300] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 21.126324] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 21.126630] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 21.126651] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 21.126931] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 21.126969] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 21.126975] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 21.126981] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 21.127003] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 21.127303] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 21.127323] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 21.127604] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 21.127662] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 21.127693] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 21.127720] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 21.131375] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 21.131396] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 21.131708] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 21.131729] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 21.132011] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 21.132049] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 21.132055] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 21.132067] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 21.132079] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 21.132090] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 21.132103] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 21.132114] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 21.132125] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 21.132135] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 21.132146] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 21.132157] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 21.132174] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000003485c434 [ 21.132189] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 00000000f3f95346 state to 000000003485c434 [ 21.132204] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 00000000aea07571 state to 000000003485c434 [ 21.132219] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000fc422665 state to 000000003485c434 [ 21.132230] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000fc422665 [ 21.132244] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000c0058c84 state to 000000003485c434 [ 21.132254] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000c0058c84 [ 21.132268] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 00000000427abb90 state to 000000003485c434 [ 21.132281] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 000000009e40c447 state to 000000003485c434 [ 21.132292] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 000000009e40c447 [ 21.132306] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 000000008a0b1ad5 state to 000000003485c434 [ 21.132316] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 000000008a0b1ad5 [ 21.132329] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 000000006b595243 state to 000000003485c434 [ 21.132342] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 0000000077110ea9 state to 000000003485c434 [ 21.132353] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 0000000077110ea9 [ 21.132366] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000292e9210 state to 000000003485c434 [ 21.132377] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 00000000292e9210 [ 21.132388] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 00000000f3f95346 [ 21.132402] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003485c434 [ 21.132416] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 00000000edb2f1cc state to 000000003485c434 [ 21.132427] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000edb2f1cc to [NOCRTC] [ 21.132437] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000edb2f1cc to [CRTC:51:pipe A] [ 21.132451] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 00000000fad23bb8 state to 000000003485c434 [ 21.132463] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 00000000fad23bb8 [ 21.132473] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 00000000427abb90 [ 21.132486] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000003485c434 [ 21.132500] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 0000000012b9aec8 state to 000000003485c434 [ 21.132511] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 0000000012b9aec8 [ 21.132521] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 000000006b595243 [ 21.132535] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000003485c434 [ 21.132549] [drm:drm_atomic_check_only [drm]] checking 000000003485c434 [ 21.132559] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 21.132566] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 21.132573] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 21.132587] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003485c434 [ 21.132600] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 000000003485c434 [ 21.132633] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 21.132668] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 24 pixel clock 108000KHz [ 21.132692] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 21.132716] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 21.132739] [drm:intel_dp_compute_config [i915]] DP link rate required 243000 available 270000 [ 21.132769] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 21.132802] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 21.132830] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 21.132864] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 21.132892] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 21.132918] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 21.132956] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 21.132984] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 21.133011] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 21.133039] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3774873, gmch_n: 4194304, link_m: 209715, link_n: 524288, tu: 64 [ 21.133067] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 21.133094] [drm:intel_dump_pipe_config [i915]] requested mode: [ 21.133108] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 21.133135] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 21.133149] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 21.133178] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 21.133205] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 21.133232] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 21.133260] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 21.133287] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 21.133314] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 21.133342] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 21.133371] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 21.133398] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 21.133426] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 21.133453] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 21.133481] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 21.133496] [drm:drm_atomic_commit [drm]] committing 000000003485c434 [ 21.133540] [drm:intel_edp_backlight_off [i915]] [ 21.339754] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 21.339903] [drm:intel_disable_pipe [i915]] disabling pipe A [ 21.354928] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 21.355049] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 21.355193] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000002 control 00000000 [ 21.407791] [drm:wait_panel_status [i915]] Wait complete [ 21.407890] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 21.407984] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 21.408071] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 21.408155] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 21.408247] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 21.408331] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 21.408413] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 21.408495] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 21.408578] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 21.408662] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 21.408744] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 21.408828] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 21.408904] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 21.408979] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 21.409068] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 22.043846] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 22.043950] [drm:wait_panel_status [i915]] Wait complete [ 22.044068] [drm:edp_panel_on [i915]] Wait for panel power on [ 22.044212] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 22.246466] [drm:wait_panel_status [i915]] Wait complete [ 22.246568] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 22.246683] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A] VDD on [ 22.246828] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 22.247965] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a [ 22.248971] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 22.249036] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 22.249099] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 22.249162] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 22.250657] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 22.250672] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 22.250686] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 22.252164] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 22.252178] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 22.252193] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 22.253676] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 22.253690] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 22.253705] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 22.255184] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 22.255198] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 270000, lane count = 1 [ 22.255213] [drm:intel_dp_get_link_train_fallback_values [i915]] Retrying Link training for eDP with same parameters [ 22.255679] [drm:intel_enable_pipe [i915]] enabling pipe A [ 22.255699] [drm:intel_edp_backlight_on [i915]] [ 22.255713] [drm:intel_panel_enable_backlight [i915]] pipe A [ 22.255806] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 22.255878] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 22.255898] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 22.255914] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 22.272559] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 22.272596] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 22.272640] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 22.272680] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000003485c434 [ 22.272699] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000003485c434 [ 22.272732] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 22.272760] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 22.272773] [drm:drm_client_modeset_probe [drm]] [ 22.272781] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 22.272813] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 22.272844] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 22.272874] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 22.272905] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 22.272936] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 22.274747] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 22.274763] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 22.274776] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 22.274884] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 22.274897] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 22.274910] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 22.274921] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 22.274933] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 22.274945] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 22.274956] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 22.274967] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 22.274979] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 22.274990] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 22.275001] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 22.275013] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 22.275024] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 22.275035] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 22.275046] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 22.275057] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 22.275068] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 22.275075] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 22.275102] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 22.275411] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 22.275434] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 22.275722] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 22.275771] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 22.275801] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 22.275828] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 22.279538] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 22.279563] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 22.279894] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 22.279919] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 22.280205] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 22.280244] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 22.280251] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 22.280258] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 22.280283] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 22.280588] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 22.280611] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 22.280894] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 22.280939] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 22.280963] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 22.280987] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 22.284702] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 22.284727] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 22.285033] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 22.285057] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 22.285341] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 22.285380] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 22.285386] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 22.285401] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 22.285414] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 22.285427] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 22.285441] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 22.285454] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 22.285467] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 22.285479] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 22.285491] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 22.285504] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 22.285523] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000003485c434 [ 22.285540] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 00000000f859f70e state to 000000003485c434 [ 22.285557] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 00000000191f30ea state to 000000003485c434 [ 22.285573] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000e1bf132c state to 000000003485c434 [ 22.285585] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000e1bf132c [ 22.285601] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000921a1b14 state to 000000003485c434 [ 22.285613] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000921a1b14 [ 22.285628] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 00000000a585c0b6 state to 000000003485c434 [ 22.285643] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 00000000188a8506 state to 000000003485c434 [ 22.285655] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 00000000188a8506 [ 22.285670] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 00000000165be69d state to 000000003485c434 [ 22.285682] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 00000000165be69d [ 22.285697] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 0000000044a68901 state to 000000003485c434 [ 22.285713] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 00000000f0e4482c state to 000000003485c434 [ 22.285725] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 00000000f0e4482c [ 22.285739] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000fc01e44c state to 000000003485c434 [ 22.285751] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 00000000fc01e44c [ 22.285763] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 00000000f859f70e [ 22.285779] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003485c434 [ 22.285795] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 000000008550bac3 state to 000000003485c434 [ 22.285807] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000008550bac3 to [NOCRTC] [ 22.285820] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000008550bac3 to [CRTC:51:pipe A] [ 22.285836] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 00000000a0ee22dd state to 000000003485c434 [ 22.285848] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 00000000a0ee22dd [ 22.285860] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 00000000a585c0b6 [ 22.285875] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000003485c434 [ 22.285891] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 0000000011427eab state to 000000003485c434 [ 22.285903] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 0000000011427eab [ 22.285914] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 0000000044a68901 [ 22.285930] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000003485c434 [ 22.285945] [drm:drm_atomic_check_only [drm]] checking 000000003485c434 [ 22.285957] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 22.285965] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 22.285973] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 22.285989] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003485c434 [ 22.286004] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 000000003485c434 [ 22.286041] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 22.286081] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 24 pixel clock 108000KHz [ 22.286108] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 22.286136] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 22.286162] [drm:intel_dp_compute_config [i915]] DP link rate required 243000 available 270000 [ 22.286196] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 22.286232] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 22.286265] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 22.286302] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 22.286335] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 22.286365] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 22.286407] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 22.286440] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 22.286471] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 22.286503] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3774873, gmch_n: 4194304, link_m: 209715, link_n: 524288, tu: 64 [ 22.286534] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 22.286565] [drm:intel_dump_pipe_config [i915]] requested mode: [ 22.286580] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 22.286612] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 22.286627] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 22.286659] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 22.286691] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 22.286722] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 22.286753] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 22.286784] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 22.286815] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 22.286846] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 22.286878] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 22.286910] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 22.286942] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 22.286973] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 22.287004] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 22.287021] [drm:drm_atomic_commit [drm]] committing 000000003485c434 [ 22.287070] [drm:intel_edp_backlight_off [i915]] [ 22.491776] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 22.491926] [drm:intel_disable_pipe [i915]] disabling pipe A [ 22.506932] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 22.507049] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 22.507192] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000002 control 00000000 [ 22.559792] [drm:wait_panel_status [i915]] Wait complete [ 22.559890] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 22.559983] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 22.560070] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 22.560152] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 22.560245] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 22.560329] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 22.560412] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 22.560494] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 22.560578] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 22.560661] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 22.560743] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 22.560826] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 22.560902] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 22.560977] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 22.561065] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 23.195874] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 23.195999] [drm:wait_panel_status [i915]] Wait complete [ 23.196176] [drm:edp_panel_on [i915]] Wait for panel power on [ 23.196402] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 23.397130] [drm:wait_panel_status [i915]] Wait complete [ 23.397232] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 23.397348] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A] VDD on [ 23.397494] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 23.398631] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a [ 23.399688] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 23.399782] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 23.399870] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 23.399949] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 23.401492] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 23.401506] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 23.401521] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 23.402998] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 23.403013] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 23.403027] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 23.404513] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 23.404527] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 23.404541] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 23.406018] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 23.406033] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 270000, lane count = 1 [ 23.406048] [drm:intel_dp_get_link_train_fallback_values [i915]] Retrying Link training for eDP with same parameters [ 23.406516] [drm:intel_enable_pipe [i915]] enabling pipe A [ 23.406536] [drm:intel_edp_backlight_on [i915]] [ 23.406549] [drm:intel_panel_enable_backlight [i915]] pipe A [ 23.406641] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 23.406712] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 23.406731] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 23.406748] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 23.423403] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 23.423436] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 23.423477] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 23.423513] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000003485c434 [ 23.423531] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000003485c434 [ 23.423559] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 23.423608] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 23.423625] [drm:drm_client_modeset_probe [drm]] [ 23.423637] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 23.423672] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 23.423707] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 23.423743] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 23.423773] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 23.423798] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 23.425617] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 23.425635] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 23.425648] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 23.425758] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 23.425771] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 23.425783] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 23.425795] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 23.425806] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 23.425817] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 23.425829] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 23.425840] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 23.425851] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 23.425863] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 23.425874] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 23.425885] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 23.425896] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 23.425908] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 23.425919] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 23.425930] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 23.425941] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 23.425947] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 23.425976] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 23.426285] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 23.426308] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 23.426588] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 23.426631] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 23.426654] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 23.426675] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 23.430357] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 23.430380] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 23.430683] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 23.430704] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 23.430985] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 23.431023] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 23.431029] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 23.431035] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 23.431057] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 23.431359] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 23.431380] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 23.431671] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 23.431720] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 23.431753] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 23.431774] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 23.435439] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 23.435461] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 23.435769] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 23.435790] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 23.436069] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 23.436107] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 23.436113] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 23.436126] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 23.436137] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 23.436149] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 23.436161] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 23.436172] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 23.436183] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 23.436193] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 23.436203] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 23.436215] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 23.436231] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000003485c434 [ 23.436247] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 00000000386a8214 state to 000000003485c434 [ 23.436262] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 0000000012b9aec8 state to 000000003485c434 [ 23.436275] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000fa372086 state to 000000003485c434 [ 23.436286] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000fa372086 [ 23.436300] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000292e9210 state to 000000003485c434 [ 23.436310] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000292e9210 [ 23.436325] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 0000000077110ea9 state to 000000003485c434 [ 23.436338] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 000000006b595243 state to 000000003485c434 [ 23.436348] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 000000006b595243 [ 23.436361] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 000000008a0b1ad5 state to 000000003485c434 [ 23.436372] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 000000008a0b1ad5 [ 23.436385] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 000000009e40c447 state to 000000003485c434 [ 23.436399] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 00000000427abb90 state to 000000003485c434 [ 23.436410] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 00000000427abb90 [ 23.436423] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000c0058c84 state to 000000003485c434 [ 23.436433] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 00000000c0058c84 [ 23.436444] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 00000000386a8214 [ 23.436458] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003485c434 [ 23.436473] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 0000000042c9afcc state to 000000003485c434 [ 23.436484] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 0000000042c9afcc to [NOCRTC] [ 23.436495] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 0000000042c9afcc to [CRTC:51:pipe A] [ 23.436509] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 00000000fad23bb8 state to 000000003485c434 [ 23.436519] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 00000000fad23bb8 [ 23.436529] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 0000000077110ea9 [ 23.436543] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000003485c434 [ 23.436557] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 00000000aea07571 state to 000000003485c434 [ 23.436568] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 00000000aea07571 [ 23.436579] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 000000009e40c447 [ 23.436592] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000003485c434 [ 23.436606] [drm:drm_atomic_check_only [drm]] checking 000000003485c434 [ 23.436616] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 23.436623] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 23.436631] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 23.436644] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003485c434 [ 23.436658] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 000000003485c434 [ 23.436692] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 23.436726] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 24 pixel clock 108000KHz [ 23.436750] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 23.436774] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 23.436796] [drm:intel_dp_compute_config [i915]] DP link rate required 243000 available 270000 [ 23.436824] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 23.436857] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 23.436886] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 23.436919] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 23.436946] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 23.436973] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 23.437010] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 23.437038] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 23.437067] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 23.437094] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3774873, gmch_n: 4194304, link_m: 209715, link_n: 524288, tu: 64 [ 23.437122] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 23.437149] [drm:intel_dump_pipe_config [i915]] requested mode: [ 23.437162] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 23.437190] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 23.437203] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 23.437232] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 23.437260] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 23.437288] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 23.437315] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 23.437342] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 23.437370] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 23.437398] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 23.437429] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 23.437456] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 23.437485] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 23.437513] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 23.437539] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 23.437554] [drm:drm_atomic_commit [drm]] committing 000000003485c434 [ 23.437600] [drm:intel_edp_backlight_off [i915]] [ 23.643766] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 23.643918] [drm:intel_disable_pipe [i915]] disabling pipe A [ 23.658916] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 23.659038] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 23.659180] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000 [ 23.711792] [drm:wait_panel_status [i915]] Wait complete [ 23.711890] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 23.711983] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 23.712068] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 23.712151] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 23.712244] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 23.712328] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 23.712409] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 23.712492] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 23.712576] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 23.712658] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 23.712739] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 23.712822] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 23.712897] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 23.712972] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 23.713061] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 24.347849] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 24.347955] [drm:wait_panel_status [i915]] Wait complete [ 24.348071] [drm:edp_panel_on [i915]] Wait for panel power on [ 24.348214] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 24.550465] [drm:wait_panel_status [i915]] Wait complete [ 24.550568] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 24.550683] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A] VDD on [ 24.550828] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 24.551980] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a [ 24.552922] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 24.552937] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 24.552952] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 24.552967] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 24.554454] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 24.554468] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 24.554483] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 24.555964] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 24.555979] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 24.555994] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 24.557472] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 24.557486] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 24.557501] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 24.558980] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 24.558995] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 270000, lane count = 1 [ 24.559010] [drm:intel_dp_get_link_train_fallback_values [i915]] Retrying Link training for eDP with same parameters [ 24.559477] [drm:intel_enable_pipe [i915]] enabling pipe A [ 24.559497] [drm:intel_edp_backlight_on [i915]] [ 24.559511] [drm:intel_panel_enable_backlight [i915]] pipe A [ 24.559610] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 24.559697] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 24.559721] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 24.559739] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 24.576355] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 24.576391] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 24.576436] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 24.576474] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000003485c434 [ 24.576493] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000003485c434 [ 24.576525] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 24.576555] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 24.576568] [drm:drm_client_modeset_probe [drm]] [ 24.576576] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 24.576607] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 24.576639] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 24.576669] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 24.576700] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 24.576731] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 24.578557] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 24.578575] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 24.578588] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 24.578696] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 24.578709] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 24.578721] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 24.578733] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 24.578745] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 24.578757] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 24.578768] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 24.578779] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 24.578791] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 24.578802] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 24.578813] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 24.578824] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 24.578835] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 24.578846] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 24.578857] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 24.578868] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 24.578879] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 24.578886] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 24.578914] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 24.579223] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 24.579247] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 24.579529] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 24.579574] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 24.579616] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 24.579657] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 24.583363] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 24.583391] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 24.583724] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 24.583750] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 24.584036] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 24.584076] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 24.584084] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 24.584091] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 24.584117] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 24.584423] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 24.584447] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 24.584732] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 24.584778] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 24.584803] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 24.584827] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 24.588544] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 24.588570] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 24.588875] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 24.588898] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 24.589184] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 24.589223] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 24.589229] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 24.589244] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 24.589257] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 24.589270] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 24.589284] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 24.589297] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 24.589309] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 24.589321] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 24.589333] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 24.589346] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 24.589364] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000003485c434 [ 24.589381] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 00000000188a8506 state to 000000003485c434 [ 24.589398] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 0000000011427eab state to 000000003485c434 [ 24.589414] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 00000000a585c0b6 state to 000000003485c434 [ 24.589426] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 00000000a585c0b6 [ 24.589442] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000921a1b14 state to 000000003485c434 [ 24.589454] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000921a1b14 [ 24.589469] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 00000000e1bf132c state to 000000003485c434 [ 24.589485] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 00000000f859f70e state to 000000003485c434 [ 24.589497] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 00000000f859f70e [ 24.589512] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 00000000fc422665 state to 000000003485c434 [ 24.589525] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 00000000fc422665 [ 24.589540] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 00000000f3f95346 state to 000000003485c434 [ 24.589555] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 00000000f7c0c117 state to 000000003485c434 [ 24.589567] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 00000000f7c0c117 [ 24.589582] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000fc01e44c state to 000000003485c434 [ 24.589594] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 00000000fc01e44c [ 24.589606] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 00000000188a8506 [ 24.589622] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003485c434 [ 24.589639] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 000000003547222f state to 000000003485c434 [ 24.589651] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000003547222f to [NOCRTC] [ 24.589663] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000003547222f to [CRTC:51:pipe A] [ 24.589679] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 00000000a0ee22dd state to 000000003485c434 [ 24.589691] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 00000000a0ee22dd [ 24.589703] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 00000000e1bf132c [ 24.589719] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000003485c434 [ 24.589735] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 00000000191f30ea state to 000000003485c434 [ 24.589747] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 00000000191f30ea [ 24.589759] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 00000000f3f95346 [ 24.589774] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000003485c434 [ 24.589790] [drm:drm_atomic_check_only [drm]] checking 000000003485c434 [ 24.589802] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 24.589810] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 24.589818] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 24.589834] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003485c434 [ 24.589849] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 000000003485c434 [ 24.589888] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 24.589927] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 24 pixel clock 108000KHz [ 24.589956] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 24.589984] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 24.590010] [drm:intel_dp_compute_config [i915]] DP link rate required 243000 available 270000 [ 24.590044] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 24.590081] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 24.590114] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 24.590151] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 24.590183] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 24.590213] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 24.590255] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 24.590287] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 24.590319] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 24.590351] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3774873, gmch_n: 4194304, link_m: 209715, link_n: 524288, tu: 64 [ 24.590382] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 24.590412] [drm:intel_dump_pipe_config [i915]] requested mode: [ 24.590428] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 24.590460] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 24.590474] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 24.590507] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 24.590538] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 24.590569] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 24.590601] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 24.590632] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 24.590663] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 24.590694] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 24.590726] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 24.590757] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 24.590788] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 24.590819] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 24.590850] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 24.590867] [drm:drm_atomic_commit [drm]] committing 000000003485c434 [ 24.590918] [drm:intel_edp_backlight_off [i915]] [ 24.795791] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 24.795944] [drm:intel_disable_pipe [i915]] disabling pipe A [ 24.810926] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 24.811046] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 24.811190] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000002 control 00000000 [ 24.862468] [drm:wait_panel_status [i915]] Wait complete [ 24.862567] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 24.862660] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 24.862745] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 24.862827] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 24.862920] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 24.863005] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 24.863085] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 24.863169] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 24.863253] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 24.863337] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 24.863418] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 24.863501] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 24.863576] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 24.863691] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 24.863787] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 25.257353] e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 25.257446] public: port 1(enp0s31f6) entered blocking state [ 25.257448] public: port 1(enp0s31f6) entered forwarding state [ 25.257548] IPv6: ADDRCONF(NETDEV_CHANGE): public: link becomes ready [ 25.499849] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 25.499954] [drm:wait_panel_status [i915]] Wait complete [ 25.500071] [drm:edp_panel_on [i915]] Wait for panel power on [ 25.500214] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 25.702078] [drm:wait_panel_status [i915]] Wait complete [ 25.702110] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 25.702149] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A] VDD on [ 25.702217] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 25.703278] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a [ 25.704201] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 25.704227] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 25.704249] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 25.704271] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 25.705761] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 25.705783] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 25.705804] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 25.707278] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 25.707304] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 25.707327] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 25.708802] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 25.708822] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 25.708842] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 25.710310] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 25.710329] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 270000, lane count = 1 [ 25.710346] [drm:intel_dp_get_link_train_fallback_values [i915]] Retrying Link training for eDP with same parameters [ 25.710824] [drm:intel_enable_pipe [i915]] enabling pipe A [ 25.710857] [drm:intel_edp_backlight_on [i915]] [ 25.710879] [drm:intel_panel_enable_backlight [i915]] pipe A [ 25.710952] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 25.711011] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 25.711038] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 25.711061] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 25.727572] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 25.727611] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 25.727652] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 25.727683] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000003485c434 [ 25.727700] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000003485c434 [ 25.727727] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 25.727750] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 25.727762] [drm:drm_client_modeset_probe [drm]] [ 25.727769] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 25.727794] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 25.727819] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 25.727842] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 25.727864] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 25.727886] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 25.729635] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 25.729653] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 25.729665] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 25.729765] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 25.729777] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 25.729788] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 25.729798] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 25.729808] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 25.729818] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 25.729829] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 25.729839] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 25.729849] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 25.729861] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 25.729871] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 25.729881] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 25.729891] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 25.729901] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 25.729911] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 25.729921] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 25.729933] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 25.729940] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 25.729972] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 25.730211] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 25.730235] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 25.730475] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 25.730505] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 25.730528] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 25.730551] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 25.733194] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 25.733224] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 25.733457] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 25.733479] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 25.733775] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 25.733800] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 25.733807] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 25.733815] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 25.733840] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 25.734073] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 25.734095] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 25.734325] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 25.734355] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 25.734378] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 25.734401] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 25.737044] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 25.737073] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 25.737313] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 25.737335] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 25.737547] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 25.737572] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 25.737586] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 25.737602] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 25.737613] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 25.737627] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 25.737650] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 25.737661] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 25.737671] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 25.737681] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 25.737691] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 25.737703] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 25.737719] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000003485c434 [ 25.737733] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 00000000afa44766 state to 000000003485c434 [ 25.737748] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 00000000aea07571 state to 000000003485c434 [ 25.737760] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 000000009606f45b state to 000000003485c434 [ 25.737770] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 000000009606f45b [ 25.737785] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000abaac74c state to 000000003485c434 [ 25.737795] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000abaac74c [ 25.737808] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 0000000051af037b state to 000000003485c434 [ 25.737821] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 00000000d082a5da state to 000000003485c434 [ 25.737830] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 00000000d082a5da [ 25.737842] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 0000000044ce8e30 state to 000000003485c434 [ 25.737853] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 0000000044ce8e30 [ 25.737866] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 000000004104631c state to 000000003485c434 [ 25.737879] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 00000000e35f4df8 state to 000000003485c434 [ 25.737889] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 00000000e35f4df8 [ 25.737901] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 000000006b7379b2 state to 000000003485c434 [ 25.737910] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 000000006b7379b2 [ 25.737922] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 00000000afa44766 [ 25.737935] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003485c434 [ 25.737948] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 0000000042c9afcc state to 000000003485c434 [ 25.737959] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 0000000042c9afcc to [NOCRTC] [ 25.737969] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 0000000042c9afcc to [CRTC:51:pipe A] [ 25.737981] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 00000000fad23bb8 state to 000000003485c434 [ 25.737992] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 00000000fad23bb8 [ 25.738004] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 0000000051af037b [ 25.738017] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000003485c434 [ 25.738030] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 0000000012b9aec8 state to 000000003485c434 [ 25.738041] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 0000000012b9aec8 [ 25.738050] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 000000004104631c [ 25.738064] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000003485c434 [ 25.738076] [drm:drm_atomic_check_only [drm]] checking 000000003485c434 [ 25.738087] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 25.738094] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 25.738101] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 25.738112] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000003485c434 [ 25.738123] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 000000003485c434 [ 25.738157] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 25.738190] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 24 pixel clock 108000KHz [ 25.738210] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 25.738234] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 25.738256] [drm:intel_dp_compute_config [i915]] DP link rate required 243000 available 270000 [ 25.738280] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 25.738308] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 25.738336] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 25.738369] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 25.738395] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 25.738420] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 25.738456] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 25.738481] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 25.738510] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 25.738537] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3774873, gmch_n: 4194304, link_m: 209715, link_n: 524288, tu: 64 [ 25.738560] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 25.738582] [drm:intel_dump_pipe_config [i915]] requested mode: [ 25.738600] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 25.738627] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 25.738640] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 25.738665] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 25.738691] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 25.738717] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 25.738740] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 25.738761] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 25.738788] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 25.738813] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 25.738836] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 25.738859] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 25.738885] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 25.738910] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 25.738932] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 25.738947] [drm:drm_atomic_commit [drm]] committing 000000003485c434 [ 25.739011] [drm:intel_edp_backlight_off [i915]] [ 25.943615] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 25.943678] [drm:intel_disable_pipe [i915]] disabling pipe A [ 25.944796] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 25.944837] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 25.944901] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status 80000008 control 00000000 [ 25.995723] [drm:wait_panel_status [i915]] Wait complete [ 25.995749] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 25.995773] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 25.995795] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 25.995816] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 25.995840] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 25.995861] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 25.995880] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 25.995900] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 25.995921] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 25.995941] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 25.995961] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 25.995981] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 25.995999] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 25.996018] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 25.996041] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 26.624873] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 26.624977] [drm:wait_panel_status [i915]] Wait complete [ 26.625094] [drm:edp_panel_on [i915]] Wait for panel power on [ 26.625237] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 26.826394] [drm:wait_panel_status [i915]] Wait complete [ 26.826496] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 26.826611] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A] VDD on [ 26.826754] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 26.827929] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a [ 26.828958] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 26.829029] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 26.829096] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 26.829163] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 26.830674] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 26.830688] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 26.830703] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 26.832506] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 26.832521] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 26.832536] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 26.834011] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 26.834026] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 26.834040] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 26.835520] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 26.835535] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 270000, lane count = 1 [ 26.835550] [drm:intel_dp_get_link_train_fallback_values [i915]] Retrying Link training for eDP with same parameters [ 26.836167] [drm:intel_enable_pipe [i915]] enabling pipe A [ 26.836188] [drm:intel_edp_backlight_on [i915]] [ 26.836202] [drm:intel_panel_enable_backlight [i915]] pipe A [ 26.836295] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 26.836370] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 26.836390] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 26.836406] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 26.853049] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 26.853078] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 26.853114] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 26.853148] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000003485c434 [ 26.853164] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000003485c434 [ 26.853190] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 26.853214] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 26.853225] [drm:drm_client_modeset_probe [drm]] [ 26.853232] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 26.853257] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 26.853282] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 26.853306] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 26.853332] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 26.853356] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 26.855635] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 26.855649] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 26.855659] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 26.855746] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 26.855756] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 26.855766] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 26.855775] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 26.855784] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 26.855794] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 26.855803] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 26.855812] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 26.855821] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 26.855830] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 26.855839] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 26.855848] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 26.855856] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 26.855865] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 26.855874] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 26.855883] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 26.855892] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 26.855897] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 26.855921] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 26.856249] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 26.856276] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 26.856556] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 26.856597] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 26.856615] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 26.856633] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 26.860327] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 26.860347] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 26.860645] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 26.860664] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 26.860941] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 26.860979] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 26.860984] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 26.860989] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 26.861008] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 26.861306] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 26.861324] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 26.861604] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 26.861645] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 26.861663] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 26.861682] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 26.865340] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 26.865360] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 26.865658] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 26.865677] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 26.865952] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 26.865987] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 26.865993] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 26.866004] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 26.866014] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 26.866024] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 26.866035] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 26.866044] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 26.866054] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 26.866063] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 26.866072] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 26.866082] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 26.866097] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000004961355a [ 26.866110] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 0000000027ca5939 state to 000000004961355a [ 26.866123] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 0000000011d63261 state to 000000004961355a [ 26.866135] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 000000000742b664 state to 000000004961355a [ 26.866145] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 000000000742b664 [ 26.866157] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000bbe2e63e state to 000000004961355a [ 26.866167] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000bbe2e63e [ 26.866179] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 000000007bf4037c state to 000000004961355a [ 26.866190] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 00000000ca85e288 state to 000000004961355a [ 26.866200] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 00000000ca85e288 [ 26.866211] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 00000000017cb978 state to 000000004961355a [ 26.866220] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 00000000017cb978 [ 26.866232] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 000000009dcd3e7b state to 000000004961355a [ 26.866244] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 000000002c795951 state to 000000004961355a [ 26.866253] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 000000002c795951 [ 26.866265] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000045b9672 state to 000000004961355a [ 26.866274] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 00000000045b9672 [ 26.866283] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 0000000027ca5939 [ 26.866295] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000004961355a [ 26.866308] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 00000000e5cd3eb6 state to 000000004961355a [ 26.866317] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000e5cd3eb6 to [NOCRTC] [ 26.866326] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000e5cd3eb6 to [CRTC:51:pipe A] [ 26.866339] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 000000007c3ee9a8 state to 000000004961355a [ 26.866348] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 000000007c3ee9a8 [ 26.866357] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 000000007bf4037c [ 26.866369] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000004961355a [ 26.866382] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 00000000a16e100a state to 000000004961355a [ 26.866391] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 00000000a16e100a [ 26.866400] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 000000009dcd3e7b [ 26.866412] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000004961355a [ 26.866424] [drm:drm_atomic_check_only [drm]] checking 000000004961355a [ 26.866433] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 26.866439] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 26.866445] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 26.866457] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000004961355a [ 26.866469] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 000000004961355a [ 26.866498] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 26.866529] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 24 pixel clock 108000KHz [ 26.866552] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 26.866572] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 26.866592] [drm:intel_dp_compute_config [i915]] DP link rate required 243000 available 270000 [ 26.866618] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 26.866647] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 26.866672] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 26.866701] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 26.866726] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 26.866749] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 26.866781] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 26.866806] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 26.866830] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 26.866855] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3774873, gmch_n: 4194304, link_m: 209715, link_n: 524288, tu: 64 [ 26.866878] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 26.866902] [drm:intel_dump_pipe_config [i915]] requested mode: [ 26.866914] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 26.866939] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 26.866950] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 26.866976] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 26.867000] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 26.867025] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 26.867049] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 26.867074] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 26.867098] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 26.867122] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 26.867146] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 26.867170] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 26.867195] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 26.867219] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 26.867243] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 26.867256] [drm:drm_atomic_commit [drm]] committing 000000004961355a [ 26.867297] [drm:intel_edp_backlight_off [i915]] [ 27.075335] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 27.075487] [drm:intel_disable_pipe [i915]] disabling pipe A [ 27.087978] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 27.088098] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 27.088238] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000 [ 27.138898] [drm:wait_panel_status [i915]] Wait complete [ 27.138997] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 27.139088] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 27.139175] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 27.139258] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 27.139350] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 27.139433] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 27.139515] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 27.139598] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 27.139682] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 27.139765] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 27.139848] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 27.139930] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 27.140005] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 27.140078] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 27.140207] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 27.760406] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 27.760510] [drm:wait_panel_status [i915]] Wait complete [ 27.760626] [drm:edp_panel_on [i915]] Wait for panel power on [ 27.760769] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 27.961397] [drm:wait_panel_status [i915]] Wait complete [ 27.961447] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 27.961501] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A] VDD on [ 27.961581] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 27.962673] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a [ 27.963598] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 27.963636] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 27.963673] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 27.963710] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 27.965197] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 27.965233] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 27.965268] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 27.966764] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 27.966837] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 27.966889] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 27.968396] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 27.968443] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 27.968489] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 27.969979] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 27.970025] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 270000, lane count = 1 [ 27.970072] [drm:intel_dp_get_link_train_fallback_values [i915]] Retrying Link training for eDP with same parameters [ 27.970586] [drm:intel_enable_pipe [i915]] enabling pipe A [ 27.970645] [drm:intel_edp_backlight_on [i915]] [ 27.970687] [drm:intel_panel_enable_backlight [i915]] pipe A [ 27.970784] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 27.970897] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 27.970972] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 27.971048] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 27.987552] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 27.987652] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 27.987769] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 27.987860] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000004961355a [ 27.987913] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000004961355a [ 27.988002] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 27.988063] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 27.988100] [drm:drm_client_modeset_probe [drm]] [ 27.988124] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 27.988208] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 27.988292] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 27.988376] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 27.988462] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 27.988534] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 27.990357] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 27.990403] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 27.990439] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 27.990738] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 27.990774] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 27.990810] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 27.990844] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 27.990878] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 27.990911] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 27.990944] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 27.990976] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 27.991009] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 27.991051] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 27.991098] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 27.991201] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 27.991259] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 27.991320] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 27.991378] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 27.991441] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 27.991502] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 27.991534] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 27.991650] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 27.992003] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 27.992103] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 27.992377] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 27.992432] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 27.992498] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 27.992562] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 27.995282] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 27.995364] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 27.995646] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 27.995707] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 27.995968] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 27.996007] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 27.996025] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 27.996042] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 27.996105] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 27.996367] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 27.996428] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 27.996672] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 27.996726] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 27.996785] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 27.996845] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 27.999544] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 27.999607] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 27.999871] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 27.999930] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 28.000174] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 28.000212] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 28.000229] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 28.000266] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 28.000299] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 28.000330] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 28.000364] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 28.000396] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 28.000427] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 28.000458] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 28.000487] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 28.000520] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 28.000566] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000004961355a [ 28.000608] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 000000001a30296a state to 000000004961355a [ 28.000649] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 0000000012b9aec8 state to 000000004961355a [ 28.000690] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 0000000009d62153 state to 000000004961355a [ 28.000722] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 0000000009d62153 [ 28.000760] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000a7af8bba state to 000000004961355a [ 28.000790] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000a7af8bba [ 28.000827] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 0000000021a8d3e2 state to 000000004961355a [ 28.000865] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 00000000bd045b8a state to 000000004961355a [ 28.000895] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 00000000bd045b8a [ 28.000935] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 00000000c079113d state to 000000004961355a [ 28.000965] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 00000000c079113d [ 28.001003] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 000000001582640e state to 000000004961355a [ 28.001041] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 000000006b7379b2 state to 000000004961355a [ 28.001071] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 000000006b7379b2 [ 28.001109] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 00000000e35f4df8 state to 000000004961355a [ 28.001139] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 00000000e35f4df8 [ 28.001172] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 000000001a30296a [ 28.001212] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000004961355a [ 28.001252] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 000000007ee08e94 state to 000000004961355a [ 28.001284] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000007ee08e94 to [NOCRTC] [ 28.001314] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 000000007ee08e94 to [CRTC:51:pipe A] [ 28.001354] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 00000000fad23bb8 state to 000000004961355a [ 28.001386] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 00000000fad23bb8 [ 28.001417] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 0000000021a8d3e2 [ 28.001455] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000004961355a [ 28.001495] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 00000000aea07571 state to 000000004961355a [ 28.001526] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 00000000aea07571 [ 28.001555] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 000000001582640e [ 28.001594] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000004961355a [ 28.001633] [drm:drm_atomic_check_only [drm]] checking 000000004961355a [ 28.001662] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 28.001683] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 28.001703] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 28.001742] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000004961355a [ 28.001782] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 000000004961355a [ 28.001874] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 28.001970] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 24 pixel clock 108000KHz [ 28.002041] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 28.002108] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 28.002175] [drm:intel_dp_compute_config [i915]] DP link rate required 243000 available 270000 [ 28.002260] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 28.002351] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 28.002433] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 28.002524] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 28.002606] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 28.002681] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 28.002785] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 28.002867] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 28.002949] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 28.003030] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3774873, gmch_n: 4194304, link_m: 209715, link_n: 524288, tu: 64 [ 28.003108] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 28.003187] [drm:intel_dump_pipe_config [i915]] requested mode: [ 28.003233] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 28.003352] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 28.003400] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 28.003502] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 28.003602] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 28.003698] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 28.003796] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 28.003895] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 28.003987] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 28.004081] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 28.004181] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 28.004278] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 28.004375] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 28.004472] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 28.004568] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 28.004620] [drm:drm_atomic_commit [drm]] committing 000000004961355a [ 28.004753] [drm:intel_edp_backlight_off [i915]] [ 28.214020] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 28.214150] [drm:intel_disable_pipe [i915]] disabling pipe A [ 28.222582] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 28.222685] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 28.222804] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000 [ 28.273367] [drm:wait_panel_status [i915]] Wait complete [ 28.273466] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 28.273559] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 28.273645] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 28.273729] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 28.273822] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 28.273904] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 28.273985] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 28.274067] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 28.274151] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 28.274234] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 28.274316] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 28.274400] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 28.274475] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 28.274549] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 28.274629] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 28.893739] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 28.893844] [drm:wait_panel_status [i915]] Wait complete [ 28.893956] [drm:edp_panel_on [i915]] Wait for panel power on [ 28.894098] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 [ 29.094580] [drm:wait_panel_status [i915]] Wait complete [ 29.094682] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 29.094797] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A] VDD on [ 29.094940] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 29.096077] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a [ 29.097079] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 29.097145] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 29.097210] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 29.097273] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 29.098766] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000 [ 29.098781] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 29.098795] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 29.100282] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000 [ 29.100297] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 29.100311] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 29.101787] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000 [ 29.101802] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3 [ 29.101816] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 29.103292] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached [ 29.103307] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1] Link Training failed at link rate = 270000, lane count = 1 [ 29.103322] [drm:intel_dp_get_link_train_fallback_values [i915]] Retrying Link training for eDP with same parameters [ 29.103789] [drm:intel_enable_pipe [i915]] enabling pipe A [ 29.103810] [drm:intel_edp_backlight_on [i915]] [ 29.103824] [drm:intel_panel_enable_backlight [i915]] pipe A [ 29.103930] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 29.104009] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 29.104032] [drm:intel_fbc_enable [i915]] reserved 10485760 bytes of contiguous stolen space for FBC, threshold: 1 [ 29.104048] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 29.120667] [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] [ 29.120703] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe A] [ 29.120748] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 29.120787] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000004961355a [ 29.120807] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000004961355a [ 29.120838] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:95:eDP-1] [ 29.120867] [drm:drm_fb_helper_hotplug_event.part.16 [drm_kms_helper]] [ 29.120880] [drm:drm_client_modeset_probe [drm]] [ 29.120889] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] [ 29.120920] [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] [ 29.120951] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 29.120981] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 29.121012] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 29.121043] [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A] MST support? port: no, sink: no, modparam: yes [ 29.122855] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 29.122872] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 29.122885] [drm:drm_add_display_info [drm]] non_desktop set to 0 [ 29.122994] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : [ 29.123006] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 29.123019] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 29.123030] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 29.123042] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 29.123054] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 29.123065] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 29.123077] [drm:drm_mode_debug_printmodeline [drm]] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 29.123088] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 29.123099] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 29.123111] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 29.123122] [drm:drm_mode_debug_printmodeline [drm]] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 29.123133] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 29.123144] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 29.123156] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 29.123167] [drm:drm_mode_debug_printmodeline [drm]] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 29.123178] [drm:drm_mode_debug_printmodeline [drm]] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 29.123184] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] [ 29.123211] [drm:intel_hdmi_detect [i915]] [CONNECTOR:101:HDMI-A-1] [ 29.123520] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 29.123542] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 29.123824] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 29.123866] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 29.123889] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 29.123911] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 [ 29.127649] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 29.127676] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 [ 29.127985] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 29.128010] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 29.128301] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 29.128342] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 29.128349] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:101:HDMI-A-1] disconnected [ 29.128356] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] [ 29.128382] [drm:intel_hdmi_detect [i915]] [CONNECTOR:109:HDMI-A-2] [ 29.128688] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 29.128712] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 29.128995] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 29.129041] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 29.129065] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [ 29.129089] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 [ 29.132784] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd [ 29.132809] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 [ 29.133114] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 29.133138] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 29.133422] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) [ 29.133460] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 29.133467] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:HDMI-A-2] disconnected [ 29.133481] [drm:drm_client_modeset_probe [drm]] connector 95 enabled? yes [ 29.133495] [drm:drm_client_modeset_probe [drm]] connector 101 enabled? no [ 29.133507] [drm:drm_client_modeset_probe [drm]] connector 109 enabled? no [ 29.133522] [drm:drm_client_modeset_probe [drm]] Not using firmware configuration [ 29.133535] [drm:drm_client_modeset_probe [drm]] looking for cmdline mode on connector 95 [ 29.133547] [drm:drm_client_modeset_probe [drm]] looking for preferred mode on connector 95 0 [ 29.133559] [drm:drm_client_modeset_probe [drm]] found mode 1280x1024 [ 29.133571] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1280x1024 config [ 29.133584] [drm:drm_client_modeset_probe [drm]] desired mode 1280x1024 set on crtc 51 (0,0) [ 29.133602] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000004961355a [ 29.133619] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:31:plane 1A] 00000000d082a5da state to 000000004961355a [ 29.133636] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:51:pipe A] 00000000191f30ea state to 000000004961355a [ 29.133652] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:39:plane 2A] 0000000051af037b state to 000000004961355a [ 29.133664] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:39:plane 2A] state 0000000051af037b [ 29.133680] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:47:cursor A] 00000000abaac74c state to 000000004961355a [ 29.133692] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:47:cursor A] state 00000000abaac74c [ 29.133708] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:52:plane 1B] 000000009606f45b state to 000000004961355a [ 29.133723] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:60:plane 2B] 00000000afa44766 state to 000000004961355a [ 29.133735] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:60:plane 2B] state 00000000afa44766 [ 29.133751] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:68:cursor B] 000000004104631c state to 000000004961355a [ 29.133763] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:68:cursor B] state 000000004104631c [ 29.133778] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:73:plane 1C] 000000001583a863 state to 000000004961355a [ 29.133794] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:81:plane 2C] 00000000045b9672 state to 000000004961355a [ 29.133806] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:81:plane 2C] state 00000000045b9672 [ 29.133821] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:89:cursor C] 000000002c795951 state to 000000004961355a [ 29.133833] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:89:cursor C] state 000000002c795951 [ 29.133846] [drm:drm_atomic_set_fb_for_plane [drm]] Set [FB:96] for [PLANE:31:plane 1A] state 00000000d082a5da [ 29.133862] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000004961355a [ 29.133879] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:95:eDP-1] 00000000a740c0ee state to 000000004961355a [ 29.133892] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000a740c0ee to [NOCRTC] [ 29.133904] [drm:drm_atomic_set_crtc_for_connector [drm]] Link [CONNECTOR:95:eDP-1] state 00000000a740c0ee to [CRTC:51:pipe A] [ 29.133921] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:72:pipe B] 00000000a0ee22dd state to 000000004961355a [ 29.133933] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:72:pipe B] state 00000000a0ee22dd [ 29.133944] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:52:plane 1B] state 000000009606f45b [ 29.133960] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:72:pipe B] to 000000004961355a [ 29.133976] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:93:pipe C] 0000000011427eab state to 000000004961355a [ 29.133988] [drm:drm_atomic_set_mode_for_crtc [drm]] Set [NOMODE] for [CRTC:93:pipe C] state 0000000011427eab [ 29.134000] [drm:drm_atomic_set_fb_for_plane [drm]] Set [NOFB] for [PLANE:73:plane 1C] state 000000001583a863 [ 29.134015] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:93:pipe C] to 000000004961355a [ 29.134031] [drm:drm_atomic_check_only [drm]] checking 000000004961355a [ 29.134042] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:95:eDP-1] [ 29.134050] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:95:eDP-1] keeps [ENCODER:94:DDI A], now on [CRTC:51:pipe A] [ 29.134058] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:51:pipe A] needs all connectors, enable: y, active: y [ 29.134073] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:51:pipe A] to 000000004961355a [ 29.134089] [drm:drm_atomic_add_affected_planes [drm]] Adding all current planes for [CRTC:51:pipe A] to 000000004961355a [ 29.134127] [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [ 29.134166] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max rate 270000 max bpp 24 pixel clock 108000KHz [ 29.134194] [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [ 29.134221] [drm:intel_dp_compute_config [i915]] DP lane count 1 clock 270000 bpp 18 [ 29.134247] [drm:intel_dp_compute_config [i915]] DP link rate required 243000 available 270000 [ 29.134281] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 18, dithering: 1 [ 29.134318] [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 29.134351] [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 [ 29.134388] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:51:pipe A] with [PLANE:31:plane 1A] visible 1 -> 1, off 1, on 1, ms 1 [ 29.134420] [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 [ 29.134450] [drm:intel_reference_shared_dpll.isra.11 [i915]] using DPLL 0 for pipe A [ 29.134493] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: yes [modeset] [ 29.134525] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB [ 29.134556] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 29.134589] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 3774873, gmch_n: 4194304, link_m: 209715, link_n: 524288, tu: 64 [ 29.134621] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 [ 29.134652] [drm:intel_dump_pipe_config [i915]] requested mode: [ 29.134672] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 29.134704] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 29.134719] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 29.134752] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 29.134783] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000 [ 29.134815] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 29.134846] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no [ 29.134877] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 29.134909] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 29.134940] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 [ 29.134973] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:96] 1280x1024 format = XR24 little-endian (0x34325258), visible: yes [ 29.135003] [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 [ 29.135036] [drm:intel_dump_pipe_config [i915]] src: 1280.000000x1024.000000+0.000000+0.000000 dst: 1280x1024+0+0 [ 29.135066] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no [ 29.135097] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no [ 29.135115] [drm:drm_atomic_commit [drm]] committing 000000004961355a [ 29.135165] [drm:intel_edp_backlight_off [i915]] [ 29.342609] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 29.342761] [drm:intel_disable_pipe [i915]] disabling pipe A [ 29.355199] [drm:intel_edp_panel_off.part.49 [i915]] Turn [ENCODER:94:DDI A] panel power off [ 29.355320] [drm:intel_edp_panel_off.part.49 [i915]] Wait for panel power off time [ 29.355465] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000002 control 00000000 [ 29.405883] [drm:wait_panel_status [i915]] Wait complete [ 29.405982] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 29.406075] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 29.406161] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 51 [ 29.406244] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 29.406337] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DDI A] [ 29.406422] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DDI C] [ 29.406504] [drm:intel_atomic_commit_tail [i915]] [ENCODER:108:DDI D] [ 29.406587] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 0 [ 29.406671] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 1 [ 29.406753] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 2 [ 29.406835] [drm:verify_single_dpll_state.isra.120 [i915]] DPLL 3 [ 29.406919] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 51 [ 29.406993] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 29.407067] [drm:edp_panel_on [i915]] Turn [ENCODER:94:DDI A] panel power on [ 29.407219] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle