[ 0.000000] Linux version 4.17.0-rc3+ (root@kubuntu) (gcc version 9.1.0 (Gentoo 9.1.0-r1 p1.1)) #2 SMP Tue Oct 8 17:45:37 EDT 2019 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.17.0-rc3+ root=/dev/sdb4 ro drm.debug=4 amdgpu.ppfeaturemask=0xffffffff i915.enable_fbc=1 i915.fastboot=1 root=PARTUUID=58a536d6-a125-4a33-b137-0ebe63c700f6 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f8adfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f8ae000-0x000000007f92dfff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000007f92e000-0x000000007f9f1fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f9f2000-0x000000007f9fcfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f9fd000-0x000000007f9fdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007f9fe000-0x000000007fd69fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007fd6a000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047d5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: ACPI 2.0=0x7fd6c000 SMBIOS=0x7fd6a000 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: HP EliteBook 8770w/EliteBook 8770w, BIOS 4.9-1274-g4a5f7ece3f-dirty 04/10/2019 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x47d600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-back [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 0D0000000 mask FF0000000 write-combining [ 0.000000] 2 base 0E0000000 mask FFFE00000 write-combining [ 0.000000] 3 base 100000000 mask F00000000 write-back [ 0.000000] 4 base 200000000 mask E00000000 write-back [ 0.000000] 5 base 400000000 mask F80000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: last_pfn = 0x7fd6a max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576 [ 0.000000] BRK [0x430559000, 0x430559fff] PGTABLE [ 0.000000] BRK [0x43055a000, 0x43055afff] PGTABLE [ 0.000000] BRK [0x43055b000, 0x43055bfff] PGTABLE [ 0.000000] BRK [0x43055c000, 0x43055cfff] PGTABLE [ 0.000000] BRK [0x43055d000, 0x43055dfff] PGTABLE [ 0.000000] BRK [0x43055e000, 0x43055efff] PGTABLE [ 0.000000] BRK [0x43055f000, 0x43055ffff] PGTABLE [ 0.000000] BRK [0x430560000, 0x430560fff] PGTABLE [ 0.000000] Secure boot could not be determined [ 0.000000] RAMDISK: [mem 0x37fe3000-0x37fe8fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000007FD6C000 000024 (v02 COREv4) [ 0.000000] ACPI: XSDT 0x000000007F9FDF18 00005C (v01 COREv4 COREBOOT 00000000 CORE 20190108) [ 0.000000] ACPI: FACP 0x000000007FD6F570 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190108) [ 0.000000] ACPI: DSDT 0x000000007FD6C280 0032E3 (v02 COREv4 COREBOOT 20141018 INTL 20190108) [ 0.000000] ACPI: FACS 0x000000007FD6C240 000040 [ 0.000000] ACPI: FACS 0x000000007FD6C240 000040 [ 0.000000] ACPI: SSDT 0x000000007FD6F670 002EED (v02 COREv4 COREBOOT 0000002A CORE 20190108) [ 0.000000] ACPI: MCFG 0x000000007FD72560 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190108) [ 0.000000] ACPI: APIC 0x000000007FD725A0 00008C (v02 COREv4 COREBOOT 00000000 CORE 20190108) [ 0.000000] ACPI: DMAR 0x000000007FD72630 000088 (v01 COREv4 COREBOOT 00000000 CORE 20190108) [ 0.000000] ACPI: HPET 0x000000007FD726C0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190108) [ 0.000000] ACPI: BGRT 0x000000007F9FD018 000038 (v00 INTEL EDK2 00001720 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000047d5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x47d5c8000-0x47d5f2fff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000047d5fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007f8adfff] [ 0.000000] node 0: [mem 0x000000007f9f2000-0x000000007f9fcfff] [ 0.000000] node 0: [mem 0x000000007f9fe000-0x000000007fd69fff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000047d5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047d5fffff] [ 0.000000] On node 0 totalpages: 4182468 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 1064 pages reserved [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8113 pages used for memmap [ 0.000000] DMA32 zone: 519205 pages, LIFO batch:31 [ 0.000000] Normal zone: 57176 pages used for memmap [ 0.000000] Normal zone: 3659264 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 97 pages [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f8ae000-0x7f92dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f92e000-0x7f9f1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f9fd000-0x7f9fdfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7fd6a000-0x7fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xffffffff] [ 0.000000] e820: [mem 0x80000000-0xffffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x95/0x556 with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4116051 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.17.0-rc3+ root=/dev/sdb4 ro drm.debug=4 amdgpu.ppfeaturemask=0xffffffff i915.enable_fbc=1 i915.fastboot=1 root=PARTUUID=58a536d6-a125-4a33-b137-0ebe63c700f6 [ 0.000000] Setting dangerous option i915.enable_fbc - tainting kernel [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16339648K/16729872K available (14348K kernel code, 2498K rwdata, 6148K rodata, 2500K init, 2376K bss, 390224K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 44517 entries in 174 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180313 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.004000] APIC: Switch to symmetric I/O mode setup [ 0.004000] DMAR: Host address width 36 [ 0.004000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.004000] DMAR: dmar0: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.004000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 0 [ 0.004000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.004000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.004000] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.004000] x2apic enabled [ 0.004000] Switched APIC routing to cluster x2apic. [ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.024000] tsc: Fast TSC calibration using PIT [ 0.028000] tsc: Detected 2594.001 MHz processor [ 0.028000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x25641954b62, max_idle_ns: 440795309747 ns [ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.00 BogoMIPS (lpj=10376004) [ 0.028000] pid_max: default: 32768 minimum: 301 [ 0.028000] Security Framework initialized [ 0.028000] Yama: becoming mindful. [ 0.028000] AppArmor: AppArmor initialized [ 0.034230] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.035823] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.035890] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.035943] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.036165] CPU: Physical Processor ID: 0 [ 0.036168] CPU: Processor Core ID: 0 [ 0.036177] mce: CPU supports 9 MCE banks [ 0.036187] CPU0: Thermal monitoring enabled (TM1) [ 0.036197] process: using mwait in idle threads [ 0.036201] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.036203] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.036206] Spectre V2 : Mitigation: Full generic retpoline [ 0.036309] Freeing SMP alternatives memory: 40K [ 0.040747] TSC deadline timer enabled [ 0.040749] smpboot: CPU0: Intel(R) Core(TM) i7-3720QM CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.040835] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.040859] ... version: 3 [ 0.040861] ... bit width: 48 [ 0.040862] ... generic registers: 4 [ 0.040864] ... value mask: 0000ffffffffffff [ 0.040866] ... max period: 00007fffffffffff [ 0.040867] ... fixed-purpose events: 3 [ 0.040869] ... event mask: 000000070000000f [ 0.040906] Hierarchical SRCU implementation. [ 0.041909] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.041926] smp: Bringing up secondary CPUs ... [ 0.042002] x86: Booting SMP configuration: [ 0.042004] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.056060] smp: Brought up 1 node, 8 CPUs [ 0.056060] smpboot: Max logical packages: 1 [ 0.056060] smpboot: Total of 8 processors activated (41504.01 BogoMIPS) [ 0.060511] devtmpfs: initialized [ 0.060511] x86/mm: Memory block size: 128MB [ 0.061135] evm: security.SMACK64 [ 0.061138] evm: security.SMACK64EXEC [ 0.061139] evm: security.SMACK64TRANSMUTE [ 0.061141] evm: security.SMACK64MMAP [ 0.061142] evm: security.apparmor [ 0.061144] evm: security.ima [ 0.061146] evm: security.capability [ 0.061163] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.061163] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.061163] pinctrl core: initialized pinctrl subsystem [ 0.061163] RTC time: 4:39:11, date: 10/10/19 [ 0.061163] NET: Registered protocol family 16 [ 0.061163] audit: initializing netlink subsys (disabled) [ 0.061163] audit: type=2000 audit(1570682351.060:1): state=initialized audit_enabled=0 res=1 [ 0.061163] cpuidle: using governor ladder [ 0.061163] cpuidle: using governor menu [ 0.061163] ACPI: bus type PCI registered [ 0.061163] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.061163] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.061163] PCI: not using MMCONFIG [ 0.061163] PCI: Using configuration type 1 for base access [ 0.061163] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.064350] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.064350] ACPI: Added _OSI(Module Device) [ 0.064350] ACPI: Added _OSI(Processor Device) [ 0.064350] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.064350] ACPI: Added _OSI(Processor Aggregator Device) [ 0.064350] ACPI: Added _OSI(Linux-Dell-Video) [ 0.064889] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.066004] ACPI Error: No handler for Region [ECRM] ( (ptrval)) [EmbeddedControl] (20180313/evregion-127) [ 0.066010] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20180313/exfldio-261) [ 0.066017] No Local Variables are initialized for Method [_REG] [ 0.066020] Initialized Arguments for Method [_REG]: (2 arguments defined for method invocation) [ 0.066022] Arg0: (ptrval) Integer 0000000000000001 [ 0.066027] Arg1: (ptrval) Integer 0000000000000001 [ 0.066033] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0._REG, AE_NOT_EXIST (20180313/psparse-514) [ 0.066751] ACPI: EC: EC started [ 0.066754] ACPI: EC: interrupt blocked [ 0.077021] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.077025] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.077028] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 0.077030] ACPI: Interpreter enabled [ 0.077049] ACPI: (supports S0 S3 S4 S5) [ 0.077051] ACPI: Using IOAPIC for interrupt routing [ 0.077074] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.077320] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources [ 0.077331] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.077474] ACPI: Enabled 1 GPEs in block 00 to 3F [ 0.081501] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.081508] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.081580] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.081593] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.081872] PCI host bridge to bus 0000:00 [ 0.081876] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.081879] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.081881] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.081884] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.081887] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.081889] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.081892] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.081895] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.081898] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.081900] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.081903] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.081906] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.081908] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.081911] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.081914] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.081916] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] [ 0.081919] pci_bus 0000:00: root bus resource [mem 0x82a00001-0xefffffff window] [ 0.081922] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.081925] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.081933] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.082030] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 0.082064] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.082145] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 [ 0.082155] pci 0000:00:04.0: reg 0x10: [mem 0xe2b30000-0xe2b37fff 64bit] [ 0.082258] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.082283] pci 0000:00:14.0: reg 0x10: [mem 0xe2b20000-0xe2b2ffff 64bit] [ 0.082352] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.082460] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.082563] pci 0000:00:16.0: reg 0x10: [mem 0xe2b40000-0xe2b4000f 64bit] [ 0.082896] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.083023] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.083042] pci 0000:00:19.0: reg 0x10: [mem 0xe2b00000-0xe2b1ffff] [ 0.083051] pci 0000:00:19.0: reg 0x14: [mem 0xe2b3c000-0xe2b3cfff] [ 0.083059] pci 0000:00:19.0: reg 0x18: [io 0x5000-0x501f] [ 0.083118] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.083194] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.083216] pci 0000:00:1a.0: reg 0x10: [mem 0xe2b3e000-0xe2b3e3ff] [ 0.083300] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.083382] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.083404] pci 0000:00:1b.0: reg 0x10: [mem 0xe2b38000-0xe2b3bfff 64bit] [ 0.083478] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.083561] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.083644] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.083732] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.083815] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.083902] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 [ 0.083985] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.084075] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400 [ 0.084156] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.084245] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400 [ 0.084330] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.084422] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.084444] pci 0000:00:1d.0: reg 0x10: [mem 0xe2b3f000-0xe2b3f3ff] [ 0.084528] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.084610] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 [ 0.084790] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.084810] pci 0000:00:1f.2: reg 0x10: [io 0x5040-0x5047] [ 0.084818] pci 0000:00:1f.2: reg 0x14: [io 0x5050-0x5053] [ 0.084826] pci 0000:00:1f.2: reg 0x18: [io 0x5048-0x504f] [ 0.084834] pci 0000:00:1f.2: reg 0x1c: [io 0x5054-0x5057] [ 0.084842] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f] [ 0.084850] pci 0000:00:1f.2: reg 0x24: [mem 0xe2b3d000-0xe2b3d7ff] [ 0.084895] pci 0000:00:1f.2: PME# supported from D3hot [ 0.085009] pci 0000:01:00.0: [1002:67c0] type 00 class 0x030000 [ 0.085026] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.085033] pci 0000:01:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref] [ 0.085038] pci 0000:01:00.0: reg 0x20: [io 0x1000-0x10ff] [ 0.085043] pci 0000:01:00.0: reg 0x24: [mem 0xe2800000-0xe283ffff] [ 0.085048] pci 0000:01:00.0: reg 0x30: [mem 0xe2840000-0xe285ffff pref] [ 0.085052] pci 0000:01:00.0: enabling Extended Tags [ 0.085063] pci 0000:01:00.0: BAR 0: assigned to efifb [ 0.085097] pci 0000:01:00.0: supports D1 D2 [ 0.085098] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.085153] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300 [ 0.085168] pci 0000:01:00.1: reg 0x10: [mem 0xe2860000-0xe2863fff 64bit] [ 0.085191] pci 0000:01:00.1: enabling Extended Tags [ 0.085224] pci 0000:01:00.1: supports D1 D2 [ 0.085283] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.085286] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 0.085288] pci 0000:00:01.0: bridge window [mem 0xe2800000-0xe28fffff] [ 0.085290] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] [ 0.085331] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.085403] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.085408] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.085412] pci 0000:00:1c.1: bridge window [mem 0xe1800000-0xe1ffffff] [ 0.085418] pci 0000:00:1c.1: bridge window [mem 0xe1000000-0xe17fffff 64bit pref] [ 0.085506] pci 0000:04:00.0: [197b:2380] type 00 class 0x0c0010 [ 0.085558] pci 0000:04:00.0: reg 0x10: [mem 0xe0c10000-0xe0c107ff] [ 0.085581] pci 0000:04:00.0: reg 0x14: [mem 0xe0c11000-0xe0c110ff] [ 0.085896] pci 0000:04:00.1: [197b:2392] type 00 class 0x088000 [ 0.085941] pci 0000:04:00.1: reg 0x10: [mem 0xe0c12000-0xe0c120ff] [ 0.086055] pci 0000:04:00.1: reg 0x30: [mem 0xe0c00000-0xe0c0ffff pref] [ 0.086241] pci 0000:04:00.2: [197b:2391] type 00 class 0x080501 [ 0.086286] pci 0000:04:00.2: reg 0x10: [mem 0xe0c13000-0xe0c130ff] [ 0.086586] pci 0000:04:00.3: [197b:2393] type 00 class 0x088000 [ 0.086632] pci 0000:04:00.3: reg 0x10: [mem 0xe0c14000-0xe0c140ff] [ 0.086931] pci 0000:04:00.4: [197b:2394] type 00 class 0x088000 [ 0.086976] pci 0000:04:00.4: reg 0x10: [mem 0xe0c15000-0xe0c150ff] [ 0.087331] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.087337] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.087341] pci 0000:00:1c.2: bridge window [mem 0xe0400000-0xe0cfffff] [ 0.087346] pci 0000:00:1c.2: bridge window [mem 0xe2000000-0xe27fffff 64bit pref] [ 0.087415] pci 0000:05:00.0: [168c:0030] type 00 class 0x028000 [ 0.087470] pci 0000:05:00.0: reg 0x10: [mem 0xe2900000-0xe291ffff 64bit] [ 0.087554] pci 0000:05:00.0: reg 0x30: [mem 0xe2920000-0xe292ffff pref] [ 0.087680] pci 0000:05:00.0: supports D1 [ 0.087681] pci 0000:05:00.0: PME# supported from D0 D1 D3hot [ 0.087832] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.087839] pci 0000:00:1c.3: bridge window [mem 0xe2900000-0xe29fffff] [ 0.087907] pci 0000:06:00.0: [197b:2360] type 00 class 0x010601 [ 0.087968] pci 0000:06:00.0: reg 0x10: [io 0x4010-0x4017] [ 0.087987] pci 0000:06:00.0: reg 0x14: [io 0x4020-0x4023] [ 0.088005] pci 0000:06:00.0: reg 0x18: [io 0x4018-0x401f] [ 0.088024] pci 0000:06:00.0: reg 0x1c: [io 0x4024-0x4027] [ 0.088043] pci 0000:06:00.0: reg 0x20: [io 0x4000-0x400f] [ 0.088062] pci 0000:06:00.0: reg 0x24: [mem 0xe2a10000-0xe2a101ff] [ 0.088081] pci 0000:06:00.0: reg 0x30: [mem 0xe2a00000-0xe2a0ffff pref] [ 0.088185] pci 0000:06:00.0: PME# supported from D3hot [ 0.088289] pci 0000:00:1c.4: PCI bridge to [bus 06] [ 0.088294] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 0.088298] pci 0000:00:1c.4: bridge window [mem 0xe2a00000-0xe2afffff] [ 0.088534] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.088609] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.088679] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.088750] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.088820] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.088890] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.088960] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.089029] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.089552] ACPI: EC: interrupt unblocked [ 0.089570] ACPI: EC: event unblocked [ 0.089585] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.089588] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.089650] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.089650] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.089650] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.089650] vgaarb: loaded [ 0.089650] SCSI subsystem initialized [ 0.089650] libata version 3.00 loaded. [ 0.089650] ACPI: bus type USB registered [ 0.089650] usbcore: registered new interface driver usbfs [ 0.089650] usbcore: registered new interface driver hub [ 0.089650] usbcore: registered new device driver usb [ 0.089650] pps_core: LinuxPPS API ver. 1 registered [ 0.089650] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.089650] PTP clock support registered [ 0.089650] EDAC MC: Ver: 3.0.0 [ 0.089650] Registered efivars operations [ 0.089650] PCI: Using ACPI for IRQ routing [ 0.089650] PCI: pci_cache_line_size set to 64 bytes [ 0.089650] e820: reserve RAM buffer [mem 0x7f8ae000-0x7fffffff] [ 0.089650] e820: reserve RAM buffer [mem 0x7f9fd000-0x7fffffff] [ 0.089650] e820: reserve RAM buffer [mem 0x7fd6a000-0x7fffffff] [ 0.089650] e820: reserve RAM buffer [mem 0x47d600000-0x47fffffff] [ 0.089691] NetLabel: Initializing [ 0.089694] NetLabel: domain hash size = 128 [ 0.089695] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.089710] NetLabel: unlabeled traffic allowed by default [ 0.092047] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.092054] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.094077] clocksource: Switched to clocksource tsc-early [ 0.106371] VFS: Disk quotas dquot_6.6.0 [ 0.106392] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.106490] AppArmor: AppArmor Filesystem Enabled [ 0.106517] pnp: PnP ACPI init [ 0.106702] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.106706] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.106708] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.106711] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.106713] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.106716] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.106718] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.106721] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.106724] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved [ 0.106726] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved [ 0.106732] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.107175] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.107181] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.107219] system 00:02: [io 0x0500-0x057f] has been reserved [ 0.107222] system 00:02: [io 0x0480-0x04bf] has been reserved [ 0.107227] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.107246] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.107279] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.107304] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.107327] pnp: PnP ACPI: found 6 devices [ 0.112935] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.112986] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.112990] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 0.112994] pci 0000:00:01.0: bridge window [mem 0xe2800000-0xe28fffff] [ 0.112997] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] [ 0.113002] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.113014] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.113018] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.113024] pci 0000:00:1c.1: bridge window [mem 0xe1800000-0xe1ffffff] [ 0.113030] pci 0000:00:1c.1: bridge window [mem 0xe1000000-0xe17fffff 64bit pref] [ 0.113038] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.113041] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.113048] pci 0000:00:1c.2: bridge window [mem 0xe0400000-0xe0cfffff] [ 0.113052] pci 0000:00:1c.2: bridge window [mem 0xe2000000-0xe27fffff 64bit pref] [ 0.113060] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.113066] pci 0000:00:1c.3: bridge window [mem 0xe2900000-0xe29fffff] [ 0.113076] pci 0000:00:1c.4: PCI bridge to [bus 06] [ 0.113079] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 0.113085] pci 0000:00:1c.4: bridge window [mem 0xe2a00000-0xe2afffff] [ 0.113095] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.113097] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.113098] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.113099] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.113100] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.113101] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.113102] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.113103] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.113104] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.113105] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.113106] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.113107] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.113108] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.113109] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.113110] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.113111] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] [ 0.113112] pci_bus 0000:00: resource 20 [mem 0x82a00001-0xefffffff window] [ 0.113113] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window] [ 0.113114] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.113115] pci_bus 0000:01: resource 1 [mem 0xe2800000-0xe28fffff] [ 0.113116] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref] [ 0.113117] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.113118] pci_bus 0000:03: resource 1 [mem 0xe1800000-0xe1ffffff] [ 0.113119] pci_bus 0000:03: resource 2 [mem 0xe1000000-0xe17fffff 64bit pref] [ 0.113120] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] [ 0.113121] pci_bus 0000:04: resource 1 [mem 0xe0400000-0xe0cfffff] [ 0.113122] pci_bus 0000:04: resource 2 [mem 0xe2000000-0xe27fffff 64bit pref] [ 0.113123] pci_bus 0000:05: resource 1 [mem 0xe2900000-0xe29fffff] [ 0.113124] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff] [ 0.113125] pci_bus 0000:06: resource 1 [mem 0xe2a00000-0xe2afffff] [ 0.113212] NET: Registered protocol family 2 [ 0.113396] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) [ 0.113449] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.113653] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.113830] TCP: Hash tables configured (established 131072 bind 65536) [ 0.113870] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.113927] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.114009] NET: Registered protocol family 1 [ 0.114692] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.114700] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 [ 0.114733] PCI: CLS 64 bytes, default 64 [ 0.114810] Unpacking initramfs... [ 0.114883] Freeing initrd memory: 24K [ 0.114902] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.114905] software IO TLB [mem 0x77d60000-0x7bd60000] (64MB) mapped at [ (ptrval)- (ptrval)] [ 0.115144] Scanning for low memory corruption every 60 seconds [ 0.115725] Initialise system trusted keyrings [ 0.115736] Key type blacklist registered [ 0.115764] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.116861] zbud: loaded [ 0.117305] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.117462] fuse init (API version 7.26) [ 0.117597] pstore: using deflate compression [ 0.118574] NET: Registered protocol family 38 [ 0.118579] Key type asymmetric registered [ 0.118582] Asymmetric key parser 'x509' registered [ 0.118610] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.118641] io scheduler noop registered [ 0.118643] io scheduler deadline registered [ 0.118678] io scheduler cfq registered (default) [ 0.118681] io scheduler mq-deadline registered [ 0.119857] pcieport 0000:00:01.0: Signaling PME with IRQ 25 [ 0.119880] pcieport 0000:00:1c.0: Signaling PME with IRQ 26 [ 0.119897] pcieport 0000:00:1c.1: Signaling PME with IRQ 27 [ 0.119915] pcieport 0000:00:1c.2: Signaling PME with IRQ 28 [ 0.119952] pcieport 0000:00:1c.3: Signaling PME with IRQ 29 [ 0.119970] pcieport 0000:00:1c.4: Signaling PME with IRQ 30 [ 0.119990] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 0.120030] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 0.120100] efifb: probing for efifb [ 0.120111] efifb: framebuffer at 0xd0000000, using 8128k, total 8128k [ 0.120114] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.120116] efifb: scrolling: redraw [ 0.120118] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.124477] Console: switching to colour frame buffer device 240x67 [ 0.128567] fb0: EFI VGA frame buffer device [ 0.128591] intel_idle: MWAIT substates: 0x21120 [ 0.128592] intel_idle: v0.4.1 model 0x3A [ 0.128874] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.132925] ACPI: AC Adapter [AC] (off-line) [ 0.132993] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/PNP0C09:00/PNP0C0D:00/input/input0 [ 0.133035] ACPI: Lid Switch [LID] [ 0.133079] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.133117] ACPI: Power Button [PWRF] [ 0.134314] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.155233] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.156834] Linux agpgart interface v0.103 [ 0.156909] AMD IOMMUv2 driver by Joerg Roedel [ 0.156930] AMD IOMMUv2 functionality not available on this system [ 0.157016] usbcore: registered new interface driver udl [ 0.158869] loop: module loaded [ 0.159275] ahci 0000:00:1f.2: version 3.0 [ 0.159695] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.172068] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.172105] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst [ 0.172966] scsi host0: ahci [ 0.173288] scsi host1: ahci [ 0.173593] scsi host2: ahci [ 0.173802] scsi host3: ahci [ 0.173995] scsi host4: ahci [ 0.174156] scsi host5: ahci [ 0.174213] ata1: SATA max UDMA/133 abar m2048@0xe2b3d000 port 0xe2b3d100 irq 31 [ 0.174242] ata2: SATA max UDMA/133 abar m2048@0xe2b3d000 port 0xe2b3d180 irq 31 [ 0.174269] ata3: SATA max UDMA/133 abar m2048@0xe2b3d000 port 0xe2b3d200 irq 31 [ 0.174297] ata4: SATA max UDMA/133 abar m2048@0xe2b3d000 port 0xe2b3d280 irq 31 [ 0.174324] ata5: SATA max UDMA/133 abar m2048@0xe2b3d000 port 0xe2b3d300 irq 31 [ 0.174352] ata6: SATA max UDMA/133 abar m2048@0xe2b3d000 port 0xe2b3d380 irq 31 [ 0.174865] ahci 0000:06:00.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode [ 0.174895] ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 0.175061] scsi host6: ahci [ 0.175105] ata7: SATA max UDMA/133 abar m512@0xe2a10000 port 0xe2a10100 irq 32 [ 0.175240] libphy: Fixed MDIO Bus: probed [ 0.175256] tun: Universal TUN/TAP device driver, 1.6 [ 0.175327] PPP generic driver version 2.4.2 [ 0.175376] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.175409] ehci-pci: EHCI PCI platform driver [ 0.176486] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.177435] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.178399] ehci-pci 0000:00:1a.0: debug port 2 [ 0.182081] ACPI: Battery Slot [BAT0] (battery present) [ 0.183250] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.183261] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe2b3e000 [ 0.200056] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.201079] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17 [ 0.202045] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.203015] usb usb1: Product: EHCI Host Controller [ 0.203977] usb usb1: Manufacturer: Linux 4.17.0-rc3+ ehci_hcd [ 0.204963] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.206171] hub 1-0:1.0: USB hub found [ 0.207170] hub 1-0:1.0: 3 ports detected [ 0.208416] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.209423] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.210441] ehci-pci 0000:00:1d.0: debug port 2 [ 0.215327] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.215345] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe2b3f000 [ 0.232034] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.232096] ACPI: Battery Slot [BAT1] (battery present) [ 0.233074] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17 [ 0.234991] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.235976] usb usb2: Product: EHCI Host Controller [ 0.236969] usb usb2: Manufacturer: Linux 4.17.0-rc3+ ehci_hcd [ 0.237958] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.239152] hub 2-0:1.0: USB hub found [ 0.240156] hub 2-0:1.0: 3 ports detected [ 0.241249] ehci-platform: EHCI generic platform driver [ 0.242220] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.243171] ohci-pci: OHCI PCI platform driver [ 0.244127] ohci-platform: OHCI generic platform driver [ 0.245068] uhci_hcd: USB Universal Host Controller Interface driver [ 0.246177] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.247113] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.249100] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930 [ 0.250039] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.250174] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17 [ 0.251120] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.252068] usb usb3: Product: xHCI Host Controller [ 0.253004] usb usb3: Manufacturer: Linux 4.17.0-rc3+ xhci-hcd [ 0.253939] usb usb3: SerialNumber: 0000:00:14.0 [ 0.255032] hub 3-0:1.0: USB hub found [ 0.255967] hub 3-0:1.0: 4 ports detected [ 0.256990] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.257907] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.258845] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.259819] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17 [ 0.260797] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.261777] usb usb4: Product: xHCI Host Controller [ 0.262747] usb usb4: Manufacturer: Linux 4.17.0-rc3+ xhci-hcd [ 0.263727] usb usb4: SerialNumber: 0000:00:14.0 [ 0.264861] hub 4-0:1.0: USB hub found [ 0.265867] hub 4-0:1.0: 4 ports detected [ 0.266987] usbcore: registered new interface driver usblp [ 0.268010] usbcore: registered new interface driver uas [ 0.269020] usbcore: registered new interface driver usb-storage [ 0.270006] usbcore: registered new interface driver ums-cypress [ 0.270979] usbcore: registered new interface driver ums_eneub6250 [ 0.271936] usbcore: registered new interface driver ums-freecom [ 0.272887] usbcore: registered new interface driver ums-isd200 [ 0.273823] usbcore: registered new interface driver ums-jumpshot [ 0.274751] usbcore: registered new interface driver ums-sddr09 [ 0.275664] usbcore: registered new interface driver ums-sddr55 [ 0.276571] usbcore: registered new interface driver ums-usbat [ 0.277484] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.280220] i8042: Detected active multiplexing controller, rev 1.1 [ 0.281883] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.282788] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.283713] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.284632] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.285523] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.286607] mousedev: PS/2 mouse device common for all mice [ 0.287700] rtc_cmos 00:03: RTC can wake from S4 [ 0.288739] rtc_cmos 00:03: registered as rtc0 [ 0.289608] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.290487] i2c /dev entries driver [ 0.291415] device-mapper: uevent: version 1.0.3 [ 0.292372] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 0.293266] intel_pstate: Intel P-state driver initializing [ 0.294839] ledtrig-cpu: registered to indicate activity on CPUs [ 0.295523] EFI Variables Facility v0.08 2004-May-17 [ 0.296516] NET: Registered protocol family 10 [ 0.298183] Segment Routing with IPv6 [ 0.298884] NET: Registered protocol family 17 [ 0.299623] Key type dns_resolver registered [ 0.300791] RAS: Correctable Errors collector initialized. [ 0.301513] microcode: sig=0x306a9, pf=0x10, revision=0x20 [ 0.302310] microcode: Microcode Update Driver: v2.2. [ 0.302318] sched_clock: Marking stable (302302028, 0)->(298374905, 3927123) [ 0.303872] registered taskstats version 1 [ 0.304581] Loading compiled-in X.509 certificates [ 0.305953] Loaded X.509 cert 'Build time autogenerated kernel key: da31ada77e06dabc943aad007512ce642e7c8d14' [ 0.306688] zswap: loaded using pool lzo/zbud [ 0.307602] Key type big_key registered [ 0.308317] Key type trusted registered [ 0.309087] Key type encrypted registered [ 0.309777] AppArmor: AppArmor sha1 policy hashing enabled [ 0.310466] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 0.311152] ima: Allocated hash algorithm: sha1 [ 0.311338] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.311847] evm: HMAC attrs: 0x1 [ 0.313466] Magic number: 7:330:666 [ 0.314279] rtc_cmos 00:03: setting system clock to 2019-10-10 04:39:11 UTC (1570682351) [ 0.488089] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.492105] ata7: SATA link down (SStatus 0 SControl 300) [ 0.526415] ata1.00: ATA-10: ST2000LM007-1R8174, SBK2, max UDMA/133 [ 0.527102] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.544084] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.576080] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.577807] ata1.00: configured for UDMA/133 [ 0.578710] scsi 0:0:0:0: Direct-Access ATA ST2000LM007-1R81 SBK2 PQ: 0 ANSI: 5 [ 0.579658] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 0.579668] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.580399] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.581889] sd 0:0:0:0: [sda] Write Protect is off [ 0.582588] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.582600] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.623907] sda: sda1 [ 0.625033] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.700759] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.701502] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.702692] hub 1-1:1.0: USB hub found [ 0.703621] hub 1-1:1.0: 6 ports detected [ 0.732805] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.733601] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.734800] hub 2-1:1.0: USB hub found [ 0.735802] hub 2-1:1.0: 8 ports detected [ 0.896086] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.898741] ata2.00: supports DRM functions and may not be fully accessible [ 0.900455] ata2.00: disabling queued TRIM support [ 0.900456] ata2.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133 [ 0.901242] ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 0.904216] ata2.00: supports DRM functions and may not be fully accessible [ 0.905941] ata2.00: disabling queued TRIM support [ 0.907917] ata2.00: configured for UDMA/133 [ 0.908973] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5 [ 0.910174] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 0.910185] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 0.911948] sd 1:0:0:0: [sdb] Write Protect is off [ 0.912824] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.912838] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.915300] sdb: sdb1 sdb2 sdb3 sdb4 [ 0.916910] sd 1:0:0:0: [sdb] supports TCG Opal [ 0.917827] sd 1:0:0:0: [sdb] Attached SCSI disk [ 0.992079] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 1.024081] usb 2-1.6: new full-speed USB device number 3 using ehci-pci [ 1.102332] usb 1-1.1: New USB device found, idVendor=138a, idProduct=003d, bcdDevice= 1.04 [ 1.103167] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 1.103984] usb 1-1.1: SerialNumber: 00b09c459890 [ 1.120080] tsc: Refined TSC clocksource calibration: 2594.110 MHz [ 1.120677] usb 2-1.6: New USB device found, idVendor=0a5c, idProduct=21e1, bcdDevice= 1.12 [ 1.121092] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25648013570, max_idle_ns: 440795335968 ns [ 1.121673] random: fast init done [ 1.122504] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.127253] usb 2-1.6: Product: BCM20702A0 [ 1.128858] usb 2-1.6: Manufacturer: Broadcom Corp [ 1.130289] usb 2-1.6: SerialNumber: 0C84DCE34604 [ 1.131698] clocksource: Switched to clocksource tsc [ 1.188033] usb 1-1.3: new high-speed USB device number 4 using ehci-pci [ 1.213349] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.215138] ata3.00: ATA-8: ST9750420AS, 0003HPM1, max UDMA/133 [ 1.216020] ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.218050] ata3.00: configured for UDMA/133 [ 1.219118] scsi 2:0:0:0: Direct-Access ATA ST9750420AS HPM1 PQ: 0 ANSI: 5 [ 1.220178] sd 2:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/699 GiB) [ 1.220226] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.221533] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 1.223840] sd 2:0:0:0: [sdc] Write Protect is off [ 1.224709] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.224723] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.257614] sdc: sdc1 sdc2 sdc3 sdc4 [ 1.259107] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.435352] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b270, bcdDevice=57.50 [ 1.436222] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.437066] usb 1-1.3: Product: HP HD Webcam [Fixed] [ 1.437935] usb 1-1.3: Manufacturer: Chicony [ 1.540340] ata4: SATA link down (SStatus 0 SControl 300) [ 1.855548] ata5: SATA link down (SStatus 0 SControl 300) [ 2.171442] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.174810] ata6.00: NCQ Send/Recv Log not supported [ 2.175703] ata6.00: ATA-9: SAMSUNG MZMTE256HMHP-000L1, EXT43L0Q, max UDMA/133 [ 2.176552] ata6.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.178076] ata6.00: NCQ Send/Recv Log not supported [ 2.178991] ata6.00: configured for UDMA/133 [ 2.180099] scsi 5:0:0:0: Direct-Access ATA SAMSUNG MZMTE256 3L0Q PQ: 0 ANSI: 5 [ 2.181328] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 2.181329] sd 5:0:0:0: [sdd] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 2.181337] sd 5:0:0:0: [sdd] Write Protect is off [ 2.183961] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.183972] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.185651] sd 5:0:0:0: [sdd] Attached SCSI disk [ 2.186634] md: Waiting for all devices to be available before autodetect [ 2.187496] md: If you don't use raid, use raid=noautodetect [ 2.188623] md: Autodetecting RAID arrays. [ 2.189484] md: autorun ... [ 2.190322] md: ... autorun DONE. [ 2.269233] F2FS-fs (sdb4): orphan cleanup on readonly fs [ 2.270365] F2FS-fs (sdb4): Mounted with checkpoint version = 48c6c12d [ 2.271203] VFS: Mounted root (f2fs filesystem) readonly on device 8:20. [ 2.272786] devtmpfs: mounted [ 2.275059] Freeing unused kernel memory: 2500K [ 2.275912] Write protecting the kernel read-only data: 24576k [ 2.277283] Freeing unused kernel memory: 2004K [ 2.281034] Freeing unused kernel memory: 2044K [ 2.290007] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.290800] x86/mm: Checking user space page tables [ 2.299518] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.348047] systemd[1]: systemd 242 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL -XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 2.368271] systemd[1]: Detected architecture x86-64. [ 2.375396] systemd[1]: Set hostname to . [ 2.385532] systemd-fstab-generator[201]: Ignoring "nofail" for root device [ 2.428420] systemd[1]: Listening on udev Control Socket. [ 2.430248] systemd[1]: Reached target Remote File Systems. [ 2.432277] systemd[1]: Listening on Journal Audit Socket. [ 2.434102] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.435903] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.437773] systemd[1]: Listening on udev Kernel Socket. [ 2.439592] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 2.491362] random: systemd-random-: uninitialized urandom read (512 bytes read) [ 2.659938] systemd-journald[209]: Received request to flush runtime journal from PID 1 [ 2.774710] sdhci: Secure Digital Host Controller Interface driver [ 2.775936] sdhci: Copyright(c) Pierre Ossman [ 2.780968] input: PC Speaker as /devices/platform/pcspkr/input/input17 [ 2.808241] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.809634] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.811347] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.825814] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 2.827095] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 2.828335] RAPL PMU: hw unit of domain package 2^-16 Joules [ 2.829552] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 2.845500] media: Linux media interface: v0.10 [ 2.856350] sdhci-pci 0000:04:00.1: SDHCI controller found [197b:2392] (rev 30) [ 2.858129] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes [ 2.861653] mmc0: SDHCI controller on PCI [0000:04:00.1] using DMA [ 2.863018] sdhci-pci 0000:04:00.2: SDHCI controller found [197b:2391] (rev 30) [ 2.864797] sdhci-pci 0000:04:00.2: Refusing to bind to secondary interface. [ 2.934436] iTCO_vendor_support: vendor-support=0 [ 2.936603] cryptd: max_cpu_qlen set to 1000 [ 2.949995] Linux video capture interface: v2.00 [ 2.953885] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 2.955045] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) [ 2.959491] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 2.961811] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 2.984739] AVX version of gcm_enc/dec engaged. [ 2.986135] AES CTR mode by8 optimization enabled [ 3.009522] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.016263] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.087604] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 70:5a:0f:8a:bf:cf [ 3.089323] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.090706] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 3.104008] raid6: sse2x1 gen() 9416 MB/s [ 3.116365] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 3.138294] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (04f2:b270) [ 3.172013] raid6: sse2x1 xor() 6269 MB/s [ 3.210016] uvcvideo 1-1.3:1.0: Entity type for entity Extension 3 was not initialized! [ 3.211443] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized! [ 3.212825] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized! [ 3.214242] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized! [ 3.216257] input: HP HD Webcam [Fixed]: HP HD Web as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input22 [ 3.217764] usbcore: registered new interface driver uvcvideo [ 3.219183] USB Video Class driver (1.1.1) [ 3.240015] raid6: sse2x2 gen() 9124 MB/s [ 3.308014] raid6: sse2x2 xor() 7447 MB/s [ 3.376014] raid6: sse2x4 gen() 11376 MB/s [ 3.444009] raid6: sse2x4 xor() 6087 MB/s [ 3.445460] raid6: using algorithm sse2x4 gen() 11376 MB/s [ 3.446926] raid6: .... xor() 6087 MB/s, rmw enabled [ 3.448576] raid6: using ssse3x2 recovery algorithm [ 3.465680] xor: automatically using best checksumming function avx [ 3.646973] Btrfs loaded, crc32c=crc32c-intel [ 3.649628] BTRFS: device label HOME devid 1 transid 1589 /dev/sda1 [ 3.713137] psmouse serio4: synaptics: queried max coordinates: x [..5648], y [..4806] [ 3.736300] BTRFS: device fsid 7c407093-92f9-4b3a-a998-77265a1ec263 devid 1 transid 184728 /dev/sdb3 [ 3.751137] psmouse serio4: synaptics: queried min coordinates: x [1292..], y [1048..] [ 3.752008] psmouse serio4: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience. [ 3.821632] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd40123/0x840300/0x26c00/0x0, board id: 2009, fw id: 1119621 [ 3.866818] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input21 [ 4.090070] [drm] amdgpu kernel modesetting enabled. [ 4.090341] random: crng init done [ 4.091758] checking generic (d0000000 7f0000) vs hw (d0000000 10000000) [ 4.093223] fb: switching to amdgpudrmfb from EFI VGA [ 4.093242] BTRFS info (device sda1): use zstd compression, level 0 [ 4.096316] BTRFS info (device sda1): disk space caching is enabled [ 4.096317] BTRFS info (device sda1): has skinny extents [ 4.096336] Console: switching to colour dummy device 80x25 [ 4.096840] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67C0 0x1028:0x17B1 0x00). [ 4.096903] [drm] register mmio base: 0xE2800000 [ 4.096906] [drm] register mmio size: 262144 [ 4.096918] [drm] probing gen 2 caps for device 8086:151 = 261ad03/e [ 4.096921] [drm] probing mlw for device 8086:151 = 261ad03 [ 4.096924] [drm] add ip block number 0 [ 4.096926] [drm] add ip block number 1 [ 4.096929] [drm] add ip block number 2 [ 4.096932] [drm] add ip block number 3 [ 4.096934] [drm] add ip block number 4 [ 4.096937] [drm] add ip block number 5 [ 4.096939] [drm] add ip block number 6 [ 4.096941] [drm] add ip block number 7 [ 4.096943] [drm] add ip block number 8 [ 4.096953] [drm] UVD is enabled in VM mode [ 4.096955] [drm] UVD ENC is enabled in VM mode [ 4.096957] [drm] VCE enabled in VM mode [ 4.097136] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window] [ 4.097142] caller pci_map_rom+0x5d/0xe0 mapping multiple BARs [ 4.097145] amdgpu 0000:01:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x7b46 [ 4.269615] ATOM BIOS: BR19413.001 [ 4.269653] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 4.269667] amdgpu 0000:01:00.0: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [ 4.269672] amdgpu 0000:01:00.0: GTT: 256M 0x0000000000000000 - 0x000000000FFFFFFF [ 4.269682] [drm] Detected VRAM RAM=8192M, BAR=256M [ 4.269684] [drm] RAM width 256bits GDDR5 [ 4.269735] [TTM] Zone kernel: Available graphics memory: 8187120 kiB [ 4.269738] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 4.269741] [TTM] Initializing pool allocator [ 4.269747] [TTM] Initializing DMA pool allocator [ 4.269806] [drm] amdgpu: 8192M of VRAM memory ready [ 4.269809] [drm] amdgpu: 8192M of GTT memory ready. [ 4.269821] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 4.269855] [drm] PCIE GART of 256M enabled (table at 0x000000F400040000). [ 4.284180] [drm] Chained IB support enabled! [ 4.286726] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 4.287297] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 4.329974] intel_rapl: Found RAPL domain package [ 4.329981] intel_rapl: Found RAPL domain core [ 4.340250] [drm:amdgpu_dm_irq_init [amdgpu]] DM_IRQ [ 4.340314] [drm:dal_bios_parser_init_cmd_tbl [amdgpu]] Don't have enable_spread_spectrum_on_ppll for v4 [ 4.340367] [drm:dal_bios_parser_init_cmd_tbl [amdgpu]] Don't have program_clock for v7 [ 4.340426] [drm] DM_PPLIB: values for Engine clock [ 4.340429] [drm] DM_PPLIB: 30000 [ 4.340430] [drm] DM_PPLIB: 56700 [ 4.340432] [drm] DM_PPLIB: 84900 [ 4.340433] [drm] DM_PPLIB: 107600 [ 4.340434] [drm] DM_PPLIB: 115300 [ 4.340435] [drm] DM_PPLIB: 118100 [ 4.340436] [drm] DM_PPLIB: 120900 [ 4.340438] [drm] DM_PPLIB: 124300 [ 4.340439] [drm] DM_PPLIB: Validation clocks: [ 4.340441] [drm] DM_PPLIB: engine_max_clock: 124300 [ 4.340442] [drm] DM_PPLIB: memory_max_clock: 125000 [ 4.340443] [drm] DM_PPLIB: level : 0 [ 4.340445] [drm] DM_PPLIB: values for Memory clock [ 4.340446] [drm] DM_PPLIB: 30000 [ 4.340447] [drm] DM_PPLIB: 125000 [ 4.340449] [drm] DM_PPLIB: Validation clocks: [ 4.340450] [drm] DM_PPLIB: engine_max_clock: 124300 [ 4.340451] [drm] DM_PPLIB: memory_max_clock: 125000 [ 4.340452] [drm] DM_PPLIB: level : 0 [ 4.340503] [drm:dc_create [amdgpu]] DC: create_links: connectors_num: physical:5, virtual:0 [ 4.340880] [drm] Display Core initialized with v3.1.38! [ 4.350743] [drm:drm_edid_to_sad] SAD: no CEA Extension found [ 4.350745] [drm] SADs count is: -2, don't need to read it [ 4.350803] [drm:log_to_debug_console [amdgpu]] dc_link_detect: manufacturer_id = E430, product_id = 2FC, serial_number = 0, manufacture_week = 0, manufacture_year = 20, display_name = , speaker_flag = 0, audio_mode_count = 0 [ 4.350807] [drm:drm_add_display_info] non_desktop set to 0 [ 4.351928] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: 0000000099f71164 for: dal_src=78, irq context=1 [ 4.351992] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: 00000000ffd4a457 for: dal_src=79, irq context=1 [ 4.352054] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: 000000004a8ebb9c for: dal_src=80, irq context=1 [ 4.352123] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: 000000003e297f62 for: dal_src=81, irq context=1 [ 4.352183] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: 000000006fdec20b for: dal_src=82, irq context=1 [ 4.352243] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: 00000000ee8c00a7 for: dal_src=83, irq context=1 [ 4.352302] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: 00000000631d1665 for: dal_src=26, irq context=1 [ 4.352360] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: 0000000005361a10 for: dal_src=27, irq context=1 [ 4.352418] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: 000000008a33cb18 for: dal_src=28, irq context=1 [ 4.352476] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: 000000004d4c5bc7 for: dal_src=29, irq context=1 [ 4.352529] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: 000000000f832c2a for: dal_src=30, irq context=1 [ 4.352574] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: 00000000b481652d for: dal_src=31, irq context=1 [ 4.352618] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: 000000000bd06daf for: dal_src=9, irq context=0 [ 4.352661] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: 0000000013f684bf for: dal_src=1, irq context=0 [ 4.352704] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: 00000000ac9d5d3d for: dal_src=7, irq context=0 [ 4.352747] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: 00000000df4f4e5d for: dal_src=2, irq context=0 [ 4.352790] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: 0000000045dc60bd for: dal_src=8, irq context=0 [ 4.352833] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: 00000000d2f974fc for: dal_src=4, irq context=0 [ 4.352875] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: 00000000b8e03721 for: dal_src=10, irq context=0 [ 4.352917] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: 00000000b471ebf9 for: dal_src=5, irq context=0 [ 4.352959] [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] DM_IRQ: added irq handler: 000000009821d21d for: dal_src=11, irq context=0 [ 4.352961] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.352964] [drm] Driver supports precise vblank timestamp query. [ 4.401144] [drm] UVD and UVD ENC initialized successfully. [ 4.463881] ath: phy0: ASPM enabled: 0x43 [ 4.463888] ath: EEPROM regdomain: 0x6a [ 4.463888] ath: EEPROM indicates we should expect a direct regpair map [ 4.463890] ath: Country alpha2 being used: 00 [ 4.463891] ath: Regpair used: 0x6a [ 4.470755] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 4.471142] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffff9df902020000, irq=19 [ 4.472759] ath9k 0000:05:00.0 wlp5s0: renamed from wlan0 [ 4.511063] [drm] VCE initialized successfully. [ 4.925834] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 5.030064] [drm:drm_setup_crtcs] [ 5.030071] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:55:eDP-1] [ 5.030077] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:55:eDP-1] status updated from unknown to connected [ 5.030084] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 5.030088] [drm:drm_add_display_info] non_desktop set to 0 [ 5.030251] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:55:eDP-1] probed modes : [ 5.030253] [drm:drm_mode_debug_printmodeline] Modeline 65:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0xa [ 5.030255] [drm:drm_mode_debug_printmodeline] Modeline 67:"1920x1080" 50 115580 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0xa [ 5.030256] [drm:drm_mode_debug_printmodeline] Modeline 66:"1920x1080" 48 110960 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0xa [ 5.030258] [drm:drm_mode_debug_printmodeline] Modeline 75:"1680x1050" 60 138700 1680 1968 2000 2080 1050 1083 1088 1111 0x40 0xa [ 5.030259] [drm:drm_mode_debug_printmodeline] Modeline 73:"1280x1024" 60 138700 1280 1968 2000 2080 1024 1083 1088 1111 0x40 0xa [ 5.030261] [drm:drm_mode_debug_printmodeline] Modeline 74:"1440x900" 60 138700 1440 1968 2000 2080 900 1083 1088 1111 0x40 0xa [ 5.030263] [drm:drm_mode_debug_printmodeline] Modeline 72:"1280x800" 60 138700 1280 1968 2000 2080 800 1083 1088 1111 0x40 0xa [ 5.030264] [drm:drm_mode_debug_printmodeline] Modeline 71:"1280x720" 60 138700 1280 1968 2000 2080 720 1083 1088 1111 0x40 0xa [ 5.030266] [drm:drm_mode_debug_printmodeline] Modeline 70:"1024x768" 60 138700 1024 1968 2000 2080 768 1083 1088 1111 0x40 0xa [ 5.030267] [drm:drm_mode_debug_printmodeline] Modeline 69:"800x600" 60 138700 800 1968 2000 2080 600 1083 1088 1111 0x40 0xa [ 5.030269] [drm:drm_mode_debug_printmodeline] Modeline 68:"640x480" 60 138700 640 1968 2000 2080 480 1083 1088 1111 0x40 0xa [ 5.030270] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:DP-1] [ 5.030272] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:DP-1] status updated from unknown to disconnected [ 5.030273] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:DP-1] disconnected [ 5.030274] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:60:DP-2] [ 5.030275] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:60:DP-2] status updated from unknown to disconnected [ 5.030276] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:60:DP-2] disconnected [ 5.030277] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:DP-3] [ 5.030278] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:DP-3] status updated from unknown to disconnected [ 5.030279] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:DP-3] disconnected [ 5.030280] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:DP-4] [ 5.030281] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:DP-4] status updated from unknown to disconnected [ 5.030282] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:DP-4] disconnected [ 5.030283] [drm:drm_setup_crtcs] connector 55 enabled? yes [ 5.030283] [drm:drm_setup_crtcs] connector 58 enabled? no [ 5.030284] [drm:drm_setup_crtcs] connector 60 enabled? no [ 5.030285] [drm:drm_setup_crtcs] connector 62 enabled? no [ 5.030285] [drm:drm_setup_crtcs] connector 64 enabled? no [ 5.030286] [drm:drm_setup_crtcs] looking for cmdline mode on connector 55 [ 5.030287] [drm:drm_setup_crtcs] looking for preferred mode on connector 55 0 [ 5.030288] [drm:drm_setup_crtcs] found mode 1920x1080 [ 5.030288] [drm:drm_setup_crtcs] picking CRTCs for 16384x16384 config [ 5.030291] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 43 (0,0) [ 5.031499] [drm] fb mappable at 0xD056A000 [ 5.031509] [drm] vram apper at 0xD0000000 [ 5.031513] [drm] size 8294400 [ 5.031518] [drm] fb depth is 24 [ 5.031523] [drm] pitch is 7680 [ 5.031653] fbcon: amdgpudrmfb (fb0) is primary device [ 5.040324] [drm:generic_reg_wait [amdgpu]] REG_WAIT taking a while: 7ms in dce110_stream_encoder_dp_blank line:954 [ 5.076952] Console: switching to colour frame buffer device 240x67 [ 5.096945] amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device [ 5.120030] mei_me 0000:00:16.0: wait hw ready failed [ 5.120103] mei_me 0000:00:16.0: hw_start failed ret = -62 [ 5.120203] mei_me 0000:00:16.0: H_RST is set = 0x80000015 [ 5.121018] [drm] Initialized amdgpu 3.25.0 20150101 for 0000:01:00.0 on minor 0 [ 5.134028] [drm:generic_reg_wait [amdgpu]] REG_WAIT taking a while: 1ms in driver_set_backlight_level line:190 [ 5.192161] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 5.194591] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready [ 5.208046] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready [ 5.226352] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready [ 5.288078] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready [ 5.498321] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:55:eDP-1] [ 5.498327] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 5.498328] [drm:drm_add_display_info] non_desktop set to 0 [ 5.498443] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:55:eDP-1] probed modes : [ 5.498445] [drm:drm_mode_debug_printmodeline] Modeline 65:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0xa [ 5.498447] [drm:drm_mode_debug_printmodeline] Modeline 67:"1920x1080" 50 115580 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0xa [ 5.498448] [drm:drm_mode_debug_printmodeline] Modeline 66:"1920x1080" 48 110960 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0xa [ 5.498450] [drm:drm_mode_debug_printmodeline] Modeline 75:"1680x1050" 60 138700 1680 1968 2000 2080 1050 1083 1088 1111 0x40 0xa [ 5.498451] [drm:drm_mode_debug_printmodeline] Modeline 73:"1280x1024" 60 138700 1280 1968 2000 2080 1024 1083 1088 1111 0x40 0xa [ 5.498453] [drm:drm_mode_debug_printmodeline] Modeline 74:"1440x900" 60 138700 1440 1968 2000 2080 900 1083 1088 1111 0x40 0xa [ 5.498454] [drm:drm_mode_debug_printmodeline] Modeline 72:"1280x800" 60 138700 1280 1968 2000 2080 800 1083 1088 1111 0x40 0xa [ 5.498456] [drm:drm_mode_debug_printmodeline] Modeline 71:"1280x720" 60 138700 1280 1968 2000 2080 720 1083 1088 1111 0x40 0xa [ 5.498457] [drm:drm_mode_debug_printmodeline] Modeline 70:"1024x768" 60 138700 1024 1968 2000 2080 768 1083 1088 1111 0x40 0xa [ 5.498459] [drm:drm_mode_debug_printmodeline] Modeline 69:"800x600" 60 138700 800 1968 2000 2080 600 1083 1088 1111 0x40 0xa [ 5.498460] [drm:drm_mode_debug_printmodeline] Modeline 68:"640x480" 60 138700 640 1968 2000 2080 480 1083 1088 1111 0x40 0xa [ 5.498515] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:DP-1] [ 5.498516] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:DP-1] disconnected [ 5.498552] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:60:DP-2] [ 5.498554] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:60:DP-2] disconnected [ 5.498583] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:DP-3] [ 5.498584] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:DP-3] disconnected [ 5.498615] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:DP-4] [ 5.498616] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:DP-4] disconnected [ 5.510342] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:55:eDP-1] [ 5.510345] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 5.510346] [drm:drm_add_display_info] non_desktop set to 0 [ 5.510448] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:55:eDP-1] probed modes : [ 5.510450] [drm:drm_mode_debug_printmodeline] Modeline 65:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0xa [ 5.510452] [drm:drm_mode_debug_printmodeline] Modeline 67:"1920x1080" 50 115580 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0xa [ 5.510453] [drm:drm_mode_debug_printmodeline] Modeline 66:"1920x1080" 48 110960 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0xa [ 5.510454] [drm:drm_mode_debug_printmodeline] Modeline 75:"1680x1050" 60 138700 1680 1968 2000 2080 1050 1083 1088 1111 0x40 0xa [ 5.510456] [drm:drm_mode_debug_printmodeline] Modeline 73:"1280x1024" 60 138700 1280 1968 2000 2080 1024 1083 1088 1111 0x40 0xa [ 5.510457] [drm:drm_mode_debug_printmodeline] Modeline 74:"1440x900" 60 138700 1440 1968 2000 2080 900 1083 1088 1111 0x40 0xa [ 5.510459] [drm:drm_mode_debug_printmodeline] Modeline 72:"1280x800" 60 138700 1280 1968 2000 2080 800 1083 1088 1111 0x40 0xa [ 5.510460] [drm:drm_mode_debug_printmodeline] Modeline 71:"1280x720" 60 138700 1280 1968 2000 2080 720 1083 1088 1111 0x40 0xa [ 5.510461] [drm:drm_mode_debug_printmodeline] Modeline 70:"1024x768" 60 138700 1024 1968 2000 2080 768 1083 1088 1111 0x40 0xa [ 5.510463] [drm:drm_mode_debug_printmodeline] Modeline 69:"800x600" 60 138700 800 1968 2000 2080 600 1083 1088 1111 0x40 0xa [ 5.510464] [drm:drm_mode_debug_printmodeline] Modeline 68:"640x480" 60 138700 640 1968 2000 2080 480 1083 1088 1111 0x40 0xa [ 5.510736] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:DP-1] [ 5.510738] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:DP-1] disconnected [ 5.510755] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:60:DP-2] [ 5.510756] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:60:DP-2] disconnected [ 5.510765] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:DP-3] [ 5.510766] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:DP-3] disconnected [ 5.510773] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:DP-4] [ 5.510774] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:DP-4] disconnected [ 5.552383] [drm:drm_mode_addfb2] [FB:91] [ 5.580389] [drm:drm_mode_setcrtc] [CRTC:45:crtc-1] [ 5.580450] [drm:drm_mode_setcrtc] [CRTC:47:crtc-2] [ 5.580483] [drm:drm_mode_setcrtc] [CRTC:49:crtc-3] [ 5.580491] [drm:drm_mode_setcrtc] [CRTC:51:crtc-4] [ 5.580501] [drm:drm_mode_setcrtc] [CRTC:53:crtc-5] [ 5.580517] [drm:drm_mode_setcrtc] [CRTC:43:crtc-0] [ 5.580522] [drm:drm_mode_setcrtc] [CONNECTOR:55:eDP-1] [ 6.427250] [drm:drm_mode_addfb2] [FB:92] [ 6.443230] [drm:drm_mode_addfb2] [FB:78] [ 6.476491] [drm:drm_mode_addfb2] [FB:95] [ 7.136027] mei_me 0000:00:16.0: wait hw ready failed [ 7.136030] mei_me 0000:00:16.0: hw_start failed ret = -62 [ 7.136049] mei_me 0000:00:16.0: H_RST is set = 0x80000015 [ 9.152023] mei_me 0000:00:16.0: wait hw ready failed [ 9.152031] mei_me 0000:00:16.0: hw_start failed ret = -62 [ 9.152042] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device [ 9.152046] mei_me 0000:00:16.0: reset failed ret = -19 [ 9.152048] mei_me 0000:00:16.0: link layer initialization failed. [ 9.152051] mei_me 0000:00:16.0: init hw failure. [ 9.152123] mei_me 0000:00:16.0: initialization failed. [ 9.152371] [drm:drm_mode_addfb2] [FB:94] [ 9.152713] pcieport 0000:00:01.0: can't derive routing for PCI INT B [ 9.152717] snd_hda_intel 0000:01:00.1: PCI INT B: no GSI [ 9.152726] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 9.152728] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 9.157863] [drm:drm_mode_setcrtc] [CRTC:43:crtc-0] [ 9.157872] [drm:drm_mode_setcrtc] [CONNECTOR:55:eDP-1] [ 9.165399] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23 [ 9.165463] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24 [ 9.165516] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input25 [ 9.165552] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input26 [ 9.165586] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input27 [ 9.165620] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input28 [ 9.172708] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line [ 9.172709] snd_hda_codec_generic hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 9.172710] snd_hda_codec_generic hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 9.172710] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0 [ 9.172711] snd_hda_codec_generic hdaudioC0D0: inputs: [ 9.172712] snd_hda_codec_generic hdaudioC0D0: Mic=0xc [ 9.172713] snd_hda_codec_generic hdaudioC0D0: Internal Mic=0x11 [ 9.172713] snd_hda_codec_generic hdaudioC0D0: Line=0xf [ 9.177958] snd_hda_codec_hdmi hdaudioC0D3: No i915 binding for Intel HDMI/DP codec [ 9.178525] snd_hda_codec_hdmi hdaudioC0D3: No i915 binding for Intel HDMI/DP codec [ 9.180917] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input29 [ 9.180956] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input30 [ 9.180991] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input31 [ 9.181024] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input32 [ 9.181056] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input33 [ 9.181090] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input34 [ 9.181120] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input35