[ 0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfe5b800 (usable) [ 0.000000] BIOS-e820: 00000000dfe5b800 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100002000 - 0000000120000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 917083) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048578, 1179648) 2 entries of 3200 used [ 0.000000] end_pfn_map = 1179648 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FBB00 checksum 0 [ 0.000000] ACPI: RSDP 000FBB00, 0024 (r2 DELL ) [ 0.000000] ACPI: XSDT DFE5D200, 0064 (r1 DELL M08 27D70B05 ASL 61) [ 0.000000] ACPI: FACP DFE5D09C, 00F4 (r4 DELL M08 27D70B05 ASL 61) [ 0.000000] ACPI: DSDT DFE5D800, 63F7 (r2 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS DFE6C000, 0040 [ 0.000000] ACPI: HPET DFE5D300, 0038 (r1 DELL M08 1 ASL 61) [ 0.000000] ACPI: APIC DFE5D400, 0068 (r1 DELL M08 27D70B05 ASL 47) [ 0.000000] ACPI: ASF! DFE5D000, 007E (r32 DELL M08 27D70B05 ASL 61) [ 0.000000] ACPI: MCFG DFE5D3C0, 003E (r16 DELL M08 27D70B05 ASL 61) [ 0.000000] ACPI: SLIC DFE5D49C, 0176 (r1 DELL M08 27D70B05 ASL 61) [ 0.000000] ACPI: TCPA DFE5D700, 0032 (r1 0 ASL 0) [ 0.000000] ACPI: SSDT DFE5BAAD, 04CC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000120000000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 917083) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048578, 1179648) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000 [ 0.000000] No mptable found. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1179648 [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 917083 [ 0.000000] 0: 1048578 -> 1179648 [ 0.000000] On node 0 totalpages: 1048056 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1125 pages reserved [ 0.000000] DMA zone: 2818 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 898707 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129278 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 00000000dfe5b000 - 00000000dfe5c000 [ 0.000000] swsusp: Registered nosave memory region: 00000000dfe5c000 - 00000000e0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f4000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f4000000 - 00000000f8000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f8000000 - 00000000fec00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec10000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec10000 - 00000000fed18000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed18000 - 00000000fed1c000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed1c000 - 00000000fed20000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed20000 - 00000000fed90000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed90000 - 00000000feda0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000feda0000 - 00000000feda6000 [ 0.000000] swsusp: Registered nosave memory region: 00000000feda6000 - 00000000fee00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee10000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee10000 - 00000000ffe00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000ffe00000 - 0000000100000000 [ 0.000000] swsusp: Registered nosave memory region: 0000000100000000 - 0000000100002000 [ 0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:14000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 1030803 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 42.484315] time.c: Detected 2593.498 MHz processor. [ 42.486789] Console: colour VGA+ 80x25 [ 42.486807] Checking aperture... [ 42.486818] Calgary: detecting Calgary via BIOS EBDA area [ 42.486820] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 42.486821] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 42.524233] Placing software IO TLB between 0x103a000 - 0x503a000 [ 42.560731] Memory: 4049292k/4718592k available (2274k kernel code, 142932k reserved, 1181k data, 296k init) [ 42.560769] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 42.637434] Calibrating delay using timer specific routine.. 5192.31 BogoMIPS (lpj=10384637) [ 42.637461] Security Framework v1.0.0 initialized [ 42.637467] SELinux: Disabled at boot. [ 42.637747] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 42.640080] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 42.641205] Mount-cache hash table entries: 256 [ 42.641326] CPU: L1 I cache: 32K, L1 D cache: 32K [ 42.641329] CPU: L2 cache: 4096K [ 42.641331] CPU 0/0 -> Node 0 [ 42.641332] using mwait in idle threads. [ 42.641334] CPU: Physical Processor ID: 0 [ 42.641335] CPU: Processor Core ID: 0 [ 42.641340] CPU0: Thermal monitoring enabled (TM2) [ 42.641349] SMP alternatives: switching to UP code [ 42.641590] Early unpacking initramfs... done [ 42.910776] ACPI: Core revision 20070126 [ 42.910813] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 42.955487] Using local APIC timer interrupts. [ 42.993965] result 12468729 [ 42.993967] Detected 12.468 MHz APIC timer. [ 42.996715] SMP alternatives: switching to SMP code [ 42.996788] Booting processor 1/2 APIC 0x1 [ 43.007232] Initializing CPU#1 [ 43.084485] Calibrating delay using timer specific routine.. 5186.98 BogoMIPS (lpj=10373977) [ 43.084490] CPU: L1 I cache: 32K, L1 D cache: 32K [ 43.084491] CPU: L2 cache: 4096K [ 43.084493] CPU 1/1 -> Node 0 [ 43.084495] CPU: Physical Processor ID: 0 [ 43.084495] CPU: Processor Core ID: 1 [ 43.084500] CPU1: Thermal monitoring enabled (TM2) [ 43.084890] Intel(R) Core(TM)2 Duo CPU T7800 @ 2.60GHz stepping 0b [ 43.088488] Brought up 2 CPUs [ 43.200840] migration_cost=14 [ 43.200982] NET: Registered protocol family 16 [ 43.201046] ACPI: bus type pci registered [ 43.201052] PCI: Using configuration type 1 [ 43.206954] ACPI: EC: Look up EC in DSDT [ 43.207055] ACPI: System BIOS is requesting _OSI(Linux) [ 43.207056] ACPI: Please test with "acpi_osi=!Linux" [ 43.207057] Please send dmidecode to linux-acpi@vger.kernel.org [ 43.258748] ACPI: SSDT DFE6C080, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624) [ 43.258876] ACPI: Interpreter enabled [ 43.258878] ACPI: (supports S0 S3 S4 S5) [ 43.258889] ACPI: Using IOAPIC for interrupt routing [ 43.300189] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 43.300196] PCI: Probing PCI hardware (bus 00) [ 43.302105] PCI: Transparent bridge - 0000:00:1e.0 [ 43.302251] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 43.302611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 43.302741] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 43.302818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 43.302912] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 43.303006] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 43.303100] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 43.318789] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *5 [ 43.318877] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 43.318957] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled. [ 43.319043] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3 [ 43.319128] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 43.319215] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 43.319302] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 43.319381] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 43.319464] Linux Plug and Play Support v0.97 (c) Adam Belay [ 43.319471] pnp: PnP ACPI init [ 43.319478] ACPI: bus type pnp registered [ 43.369878] pnp: PnP ACPI: found 14 devices [ 43.369879] ACPI: ACPI bus type pnp unregistered [ 43.369914] PCI: Using ACPI for IRQ routing [ 43.369916] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 43.370057] NET: Registered protocol family 8 [ 43.370059] NET: Registered protocol family 20 [ 43.370071] PCI-GART: No AMD northbridge found. [ 43.370077] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 43.370079] hpet0: 3 64-bit timers, 14318180 Hz [ 43.371111] pnp: 00:05: ioport range 0xc80-0xcaf has been reserved [ 43.371113] pnp: 00:05: ioport range 0xcc0-0xcff could not be reserved [ 43.371118] pnp: 00:08: iomem range 0xfed00000-0xfed003ff has been reserved [ 43.371121] pnp: 00:0a: ioport range 0xcb0-0xcbb has been reserved [ 43.371123] pnp: 00:0a: iomem range 0xfed40000-0xfed44fff could not be reserved [ 43.371127] pnp: 00:0b: ioport range 0x900-0x97f has been reserved [ 43.371128] pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved [ 43.371130] pnp: 00:0b: ioport range 0x1000-0x1005 has been reserved [ 43.371132] pnp: 00:0b: ioport range 0x1008-0x100f has been reserved [ 43.371135] pnp: 00:0c: ioport range 0xf400-0xf4fe has been reserved [ 43.371137] pnp: 00:0c: ioport range 0x1006-0x1007 has been reserved [ 43.371139] pnp: 00:0c: ioport range 0x100a-0x1059 could not be reserved [ 43.371141] pnp: 00:0c: ioport range 0x1060-0x107f has been reserved [ 43.371143] pnp: 00:0c: ioport range 0x1080-0x10bf has been reserved [ 43.371144] pnp: 00:0c: ioport range 0x10c0-0x10df has been reserved [ 43.371146] pnp: 00:0c: ioport range 0x1010-0x102f has been reserved [ 43.371149] pnp: 00:0d: iomem range 0x0-0x9efff could not be reserved [ 43.371151] pnp: 00:0d: iomem range 0x9f000-0x9ffff could not be reserved [ 43.371153] pnp: 00:0d: iomem range 0xc0000-0xcffff has been reserved [ 43.371155] pnp: 00:0d: iomem range 0xe0000-0xfffff has been reserved [ 43.371366] PCI: Bridge: 0000:00:01.0 [ 43.371368] IO window: e000-efff [ 43.371371] MEM window: fa000000-feafffff [ 43.371373] PREFETCH window: e0000000-efffffff [ 43.371376] PCI: Bridge: 0000:00:1c.0 [ 43.371377] IO window: disabled. [ 43.371382] MEM window: disabled. [ 43.371386] PREFETCH window: disabled. [ 43.371391] PCI: Bridge: 0000:00:1c.1 [ 43.371392] IO window: disabled. [ 43.371397] MEM window: f9f00000-f9ffffff [ 43.371401] PREFETCH window: disabled. [ 43.371406] PCI: Bridge: 0000:00:1c.3 [ 43.371408] IO window: d000-dfff [ 43.371414] MEM window: f9c00000-f9efffff [ 43.371418] PREFETCH window: f0000000-f01fffff [ 43.371423] PCI: Bridge: 0000:00:1c.5 [ 43.371424] IO window: disabled. [ 43.371429] MEM window: f9b00000-f9bfffff [ 43.371433] PREFETCH window: disabled. [ 43.371443] PCI: Bus 4, cardbus bridge: 0000:03:01.0 [ 43.371445] IO window: 00002000-000020ff [ 43.371449] IO window: 00002400-000024ff [ 43.371454] PREFETCH window: 120000000-123ffffff [ 43.371458] MEM window: 124000000-127ffffff [ 43.371463] PCI: Bridge: 0000:00:1e.0 [ 43.371466] IO window: 2000-2fff [ 43.371471] MEM window: f9a00000-f9afffff [ 43.371475] PREFETCH window: 120000000-123ffffff [ 43.371488] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 43.371492] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 43.371512] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 43.371517] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 43.371539] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 43.371544] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 43.371566] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 43.371571] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 43.371592] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 43.371597] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 43.371609] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 43.371625] PCI: Enabling device 0000:03:01.0 (0000 -> 0003) [ 43.371628] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 43.371640] NET: Registered protocol family 2 [ 43.371880] Time: hpet clocksource has been installed. [ 43.407877] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 43.408889] TCP established hash table entries: 524288 (order: 11, 12582912 bytes) [ 43.414980] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 43.415561] TCP: Hash tables configured (established 524288 bind 65536) [ 43.415564] TCP reno registered [ 43.427875] checking if image is initramfs... it is [ 43.956840] Freeing initrd memory: 7706k freed [ 43.960488] audit: initializing netlink socket (disabled) [ 43.960506] audit(1204500608.448:1): initialized [ 43.962006] VFS: Disk quotas dquot_6.5.1 [ 43.962042] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 43.962106] io scheduler noop registered [ 43.962107] io scheduler anticipatory registered [ 43.962109] io scheduler deadline registered [ 43.962179] io scheduler cfq registered (default) [ 43.965373] Boot video device is 0000:01:00.0 [ 43.965484] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 43.965512] assign_interrupt_mode Found MSI capability [ 43.965514] Allocate Port Service[0000:00:01.0:pcie00] [ 43.965541] Allocate Port Service[0000:00:01.0:pcie02] [ 43.965602] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 43.965657] assign_interrupt_mode Found MSI capability [ 43.965659] Allocate Port Service[0000:00:1c.0:pcie00] [ 43.965679] Allocate Port Service[0000:00:1c.0:pcie02] [ 43.965763] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 43.965818] assign_interrupt_mode Found MSI capability [ 43.965820] Allocate Port Service[0000:00:1c.1:pcie00] [ 43.965842] Allocate Port Service[0000:00:1c.1:pcie02] [ 43.965926] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 43.965981] assign_interrupt_mode Found MSI capability [ 43.965983] Allocate Port Service[0000:00:1c.3:pcie00] [ 43.966004] Allocate Port Service[0000:00:1c.3:pcie02] [ 43.966090] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 43.966145] assign_interrupt_mode Found MSI capability [ 43.966146] Allocate Port Service[0000:00:1c.5:pcie00] [ 43.966169] Allocate Port Service[0000:00:1c.5:pcie02] [ 43.980593] Real Time Clock Driver v1.12ac [ 43.980706] hpet_resources: 0xfed00000 is busy [ 43.980759] Linux agpgart interface v0.102 (c) Dave Jones [ 43.980761] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 43.980882] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 43.981325] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 43.981758] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 43.981852] input: Macintosh mouse button emulation as /class/input/input0 [ 43.981905] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 43.985100] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 43.985104] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 43.985218] mice: PS/2 mouse device common for all mice [ 43.985310] TCP cubic registered [ 43.985355] NET: Registered protocol family 1 [ 43.985513] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 43.985518] Freeing unused kernel memory: 296k freed [ 43.988056] input: AT Translated Set 2 keyboard as /class/input/input1 [ 45.100408] AppArmor: AppArmor initialized<5>audit(1204500609.592:2): type=1505 info="AppArmor initialized" pid=1285 [ 45.111933] fuse init (API version 7.8) [ 45.122811] Failure registering capabilities with primary security module. [ 45.137082] ACPI: SSDT DFE5C4B4, 02C8 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 45.137229] ACPI: SSDT DFE5BF79, 04B6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 45.137420] Monitor-Mwait will be used to enter C-1 state [ 45.137422] Monitor-Mwait will be used to enter C-2 state [ 45.137424] Monitor-Mwait will be used to enter C-3 state [ 45.137427] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 45.137430] ACPI: Processor [CPU0] (supports 8 throttling states) [ 45.137581] ACPI: SSDT DFE5C77C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 45.137710] ACPI: SSDT DFE5C42F, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 45.144091] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 45.144095] ACPI: Processor [CPU1] (supports 8 throttling states) [ 45.159250] ACPI: Thermal Zone [THM] (55 C) [ 45.443596] usbcore: registered new interface driver usbfs [ 45.443614] usbcore: registered new interface driver hub [ 45.443647] usbcore: registered new device driver usb [ 45.468773] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 [ 45.469763] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 45.469768] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 45.469905] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 45.469946] ehci_hcd 0000:00:1a.7: debug port 1 [ 45.469952] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 45.469963] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 45.473880] USB Universal Host Controller Interface driver v3.0 [ 45.475842] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 45.475924] usb usb1: configuration #1 chosen from 1 choice [ 45.475947] hub 1-0:1.0: USB hub found [ 45.475953] hub 1-0:1.0: 4 ports detected [ 45.525808] SCSI subsystem initialized [ 45.528725] libata version 2.21 loaded. [ 45.579503] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 45.580365] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 45.580370] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 45.580571] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 45.580606] ehci_hcd 0000:00:1d.7: debug port 1 [ 45.580612] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 45.580623] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 45.584512] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 45.584750] usb usb2: configuration #1 chosen from 1 choice [ 45.584852] hub 2-0:1.0: USB hub found [ 45.584857] hub 2-0:1.0: 6 ports detected [ 45.687250] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 45.687261] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 45.687264] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 45.687285] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 45.687312] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 45.687379] usb usb3: configuration #1 chosen from 1 choice [ 45.687396] hub 3-0:1.0: USB hub found [ 45.687401] hub 3-0:1.0: 2 ports detected [ 45.713397] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 45.713413] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 45.713419] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 45.713450] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 45.713485] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 45.713577] usb usb4: configuration #1 chosen from 1 choice [ 45.713593] hub 4-0:1.0: USB hub found [ 45.713598] hub 4-0:1.0: 2 ports detected [ 45.755075] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 45.755083] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 45.755087] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 45.755099] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 45.755135] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 45.755206] usb usb5: configuration #1 chosen from 1 choice [ 45.755222] hub 5-0:1.0: USB hub found [ 45.755226] hub 5-0:1.0: 2 ports detected [ 45.797521] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 45.797532] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 45.797538] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 45.797562] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 45.797591] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 45.797706] usb usb6: configuration #1 chosen from 1 choice [ 45.797721] hub 6-0:1.0: USB hub found [ 45.797725] hub 6-0:1.0: 2 ports detected [ 45.813601] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 45.813612] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 45.813617] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 45.813642] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 45.813672] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 45.813773] usb usb7: configuration #1 chosen from 1 choice [ 45.813790] hub 7-0:1.0: USB hub found [ 45.813794] hub 7-0:1.0: 2 ports detected [ 45.834966] ata_piix 0000:00:1f.1: version 2.11 [ 45.834978] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 45.835005] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 45.835343] scsi0 : ata_piix [ 45.835375] scsi1 : ata_piix [ 45.837124] ata1: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000016fa0 irq 14 [ 45.837127] ata2: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000016fa8 irq 15 [ 45.868798] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 45.903931] usb 3-2: configuration #1 chosen from 1 choice [ 45.929306] ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D300, max UDMA/33 [ 45.979411] usb 7-1: new full speed USB device using uhci_hcd and address 2 [ 45.981413] ata1.00: configured for UDMA/33 [ 45.981459] ata2: port disabled. ignoring. [ 45.982456] scsi 0:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H D300 PQ: 0 ANSI: 5 [ 45.982596] ACPI: PCI Interrupt 0000:03:01.4[A] -> GSI 19 (level, low) -> IRQ 19 [ 46.037413] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[f9aff000-f9aff7ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 46.039484] ahci 0000:00:1f.2: version 2.2 [ 46.039507] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 46.040374] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x5) don't match [ 46.040705] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 46.040708] Uniform CD-ROM driver Revision: 3.20 [ 46.040867] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 46.043314] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 46.073441] usb 7-1: configuration #1 chosen from 1 choice [ 46.074464] hub 7-1:1.0: USB hub found [ 46.077388] hub 7-1:1.0: 4 ports detected [ 46.209855] usb 7-1.2: new full speed USB device using uhci_hcd and address 3 [ 46.264528] usb 7-1.2: configuration #1 chosen from 1 choice [ 46.526892] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode [ 46.526898] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 46.526906] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 46.527044] scsi2 : ahci [ 46.527113] scsi3 : ahci [ 46.527135] scsi4 : ahci [ 46.527340] ata3: SATA max UDMA/133 cmd 0xffffc20001448900 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 17 [ 46.527342] ata4: DUMMY [ 46.527345] ata5: SATA max UDMA/133 cmd 0xffffc20001448a00 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 17 [ 46.789880] ieee1394: Host added: ID:BUS[0-00:1023] GUID[4a4fc0003872d1a1] [ 46.917822] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 46.984279] ISO 9660 Extensions: RRIP_1991A [ 47.003391] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 47.005053] ata3.00: ATA-7: ST9160823ASG, 3.ADD, max UDMA/133 [ 47.005058] ata3.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 31/32) [ 47.005826] ata3.00: configured for UDMA/133 [ 47.314709] ata5: SATA link down (SStatus 0 SControl 300) [ 47.314812] scsi 2:0:0:0: Direct-Access ATA ST9160823ASG 3.AD PQ: 0 ANSI: 5 [ 47.314887] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 47.315435] tg3.c:v3.77 (May 31, 2007) [ 47.315461] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 47.315472] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 47.319681] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 47.319690] sd 2:0:0:0: [sda] Write Protect is off [ 47.319692] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 47.319700] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 47.319735] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 47.319740] sd 2:0:0:0: [sda] Write Protect is off [ 47.319742] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 47.319751] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 47.319754] sda:Registering unionfs 1.4 [ 47.323219] unionfs: debugging is not enabled [ 47.326999] loop: module loaded [ 47.335288] eth0: Tigon3 [partno(BCM95755m) rev a002 PHY(5755)] (PCI Express) 10/100/1000Base-T Ethernet 00:1d:09:c4:3e:77 [ 47.335293] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 47.335294] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 47.452147] sda4 [ 47.452605] sda4: [ 47.453866] sd 2:0:0:0: [sda] Attached SCSI disk [ 48.306214] squashfs: version 3.2-UBUNTU (2007/07/26) Phillip Lougher [ 125.376525] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 126.016237] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 126.383158] input: PC Speaker as /class/input/input2 [ 126.923284] input: PS/2 Mouse as /class/input/input3 [ 126.946602] input: AlpsPS/2 ALPS GlidePoint as /class/input/input4 [ 127.121069] Yenta: CardBus bridge found at 0000:03:01.0 [1028:01fe] [ 127.121093] Yenta O2: res at 0x94/0xD4: 00/ea [ 127.121095] Yenta O2: enabling read prefetch/write burst [ 127.124169] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.0 [ 127.124171] iwl4965: Copyright(c) 2003-2007 Intel Corporation [ 127.247332] Yenta: ISA IRQ mask 0x04b8, PCI irq 19 [ 127.247337] Socket status: 30000006 [ 127.247340] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07 [ 127.247345] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 127.247347] pcmcia: parent PCI bridge Memory window: 0xf9a00000 - 0xf9afffff [ 127.247349] pcmcia: parent PCI bridge Memory window: 0x120000000 - 0x123ffffff [ 127.247897] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 127.247925] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 127.248760] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [ 127.270695] Bluetooth: Core ver 2.11 [ 127.270733] NET: Registered protocol family 31 [ 127.270734] Bluetooth: HCI device and connection manager initialized [ 127.270736] Bluetooth: HCI socket layer initialized [ 127.319100] Bluetooth: HCI USB driver ver 2.9 [ 127.320940] usbcore: registered new interface driver hci_usb [ 127.834201] iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels [ 127.834359] wmaster0: Selected rate control algorithm 'iwl-4965-rs' [ 127.940702] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 127.941615] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 128.417934] hda_intel: azx_get_response timeout, switching to polling mode... [ 128.498933] hda_intel: azx_get_response timeout, switching to single_cmd mode... [ 132.041790] hda_codec: No auto-config is available, default to model=ref [ 139.135705] hda-intel: no codecs initialized [ 139.136699] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 141.436623] ACPI: AC Adapter [AC] (on-line) [ 141.519227] ACPI: Battery Slot [BAT0] (battery present) [ 141.519270] ACPI: Battery Slot [BAT1] (battery absent) [ 141.570084] ACPI: ACPI Dock Station Driver [ 141.570681] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: found ejectable bay [ 141.570684] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: Adding notify handler [ 141.570702] ACPI: Bay [\_SB_.PCI0.IDE0.SEC0.MAST] Added [ 141.570711] ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: found ejectable bay [ 141.570714] ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: Adding notify handler [ 141.570722] ACPI: Error installing bay notify handler [ 141.570724] ACPI: Bay [\_SB_.PCI0.IDE1.PRI_.MAST] Added [ 141.587922] input: Lid Switch as /class/input/input5 [ 141.587948] ACPI: Lid Switch [LID] [ 141.587981] input: Power Button (CM) as /class/input/input6 [ 141.587996] ACPI: Power Button (CM) [PBTN] [ 141.588022] input: Sleep Button (CM) as /class/input/input7 [ 141.588033] ACPI: Sleep Button (CM) [SBTN] [ 141.675144] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 141.675667] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 141.675726] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 147.105132] PM: Writing back config space on device 0000:09:00.0 at offset c (was ffb70000, writing 0) [ 147.178034] lp: driver loaded but no devices found [ 147.329619] ppdev: user-space parallel port driver [ 150.021725] Failure registering capabilities with primary security module. [ 150.340710] Bluetooth: L2CAP ver 2.8 [ 150.340718] Bluetooth: L2CAP socket layer initialized [ 150.511937] Bluetooth: RFCOMM socket layer initialized [ 150.512104] Bluetooth: RFCOMM TTY layer initialized [ 150.512109] Bluetooth: RFCOMM ver 1.8 [ 219.750178] NET: Registered protocol family 10 [ 219.750490] lo: Disabled Privacy Extensions [ 219.750627] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 219.750703] ADDRCONF(NETDEV_UP): wlan0: link is not ready