Linux version 2.6.25-rc6-git4 (root@koala) (gcc version 4.2.3 (Debian 4.2.3-2)) #1 PREEMPT Thu Mar 20 19:38:26 CET 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000004dee0000 (usable) BIOS-e820: 000000004dee0000 - 000000004deec000 (ACPI data) BIOS-e820: 000000004deec000 - 000000004df00000 (ACPI NVS) BIOS-e820: 000000004df00000 - 0000000050000000 (reserved) BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) 350MB HIGHMEM available. 896MB LOWMEM available. Entering add_active_range(0, 0, 319200) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 319200 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 319200 On node 0 totalpages: 319200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 701 pages used for memmap HighMem zone: 89123 pages, LIFO batch:15 Movable zone: 0 pages used for memmap DMI present. ACPI: RSDP 000F6050, 0014 (r0 ACER ) ACPI: RSDT 4DEE5A39, 0030 (r1 ACER Wagtail 20020114 LTP 0) ACPI: FACP 4DEEBF2C, 0074 (r1 ACER Wagtail 20020114 PTL 50) ACPI: DSDT 4DEE5A69, 64C3 (r1 ACER Wagtail 20020114 MSFT 100000E) ACPI: FACS 4DEFCFC0, 0040 ACPI: HPET 4DEEBFA0, 0038 (r1 ACER Wagtail 20020114 PTL 0) ACPI: BOOT 4DEEBFD8, 0028 (r1 ACER Wagtail 20020114 LTP 1) ACPI: PM-Timer IO Port: 0x1008 ACPI: HPET id: 0x8086a201 base: 0x0 is invalid Allocating PCI resources starting at 60000000 (gap: 50000000:aec10000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000 PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000 PM: Registered nosave memory: 00000000000d0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 316707 Kernel command line: root=/dev/sda1 ro vga=0x31b resume=/dev/sda2 mac80211.ieee80211_regdom=64 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Preemptible RCU implementation. PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1395.513 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1259380k/1276800k available (3639k kernel code, 16624k reserved, 1440k data, 232k init, 359296k highmem) virtual kernel memory layout: fixmap : 0xfffe9000 - 0xfffff000 ( 88 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc05fa000 - 0xc0634000 ( 232 kB) .data : 0xc048dfd6 - 0xc05f6138 (1440 kB) .text : 0xc0100000 - 0xc048dfd6 (3639 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 2792.74 BogoMIPS (lpj=5585481) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05 Checking 'hlt' instruction... OK. Freeing SMP alternatives: 0k freed ACPI: Core revision 20070126 ACPI: setting ELCR to 0200 (from 0c00) net_namespace: 536 bytes NET: Registered protocol family 16 No dock devices found. ACPI: \_SB_.PCI0.IDE0.SECN.BAY1: found ejectable bay ACPI: \_SB_.PCI0.IDE0.SECN.BAY1: Adding notify handler ACPI: Bay [\_SB_.PCI0.IDE0.SECN.BAY1] Added ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd742, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Device [SECN] status [00000008]: functional but not present; setting present ACPI: Device [BAY1] status [00000008]: functional but not present; setting present ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *11) ACPI: PCI Interrupt Link [LNKB] (IRQs *10) ACPI: PCI Interrupt Link [LNKC] (IRQs *10) ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *11 ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs *10) ACPI: Power Resource [PFN0] (off) ACPI: Power Resource [PFN1] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Time: tsc clocksource has been installed. system 00:04: ioport range 0x600-0x60f has been reserved system 00:04: ioport range 0x700-0x70f has been reserved system 00:04: ioport range 0x800-0x80f has been reserved system 00:04: ioport range 0x1000-0x107f has been reserved system 00:04: ioport range 0x1180-0x11bf has been reserved system 00:04: ioport range 0x1c0-0x1cf has been reserved system 00:04: ioport range 0xfe00-0xfe00 has been reserved system 00:04: ioport range 0x4d0-0x4d1 has been reserved system 00:04: ioport range 0x610-0x61f has been reserved system 00:04: iomem range 0xfec10000-0xfec1ffff could not be reserved system 00:04: iomem range 0xff800000-0xffbfffff could not be reserved system 00:04: iomem range 0xfff00000-0xffffffff could not be reserved system 00:04: iomem range 0x0-0x9ffff could not be reserved system 00:04: iomem range 0xe0000-0xfffff could not be reserved system 00:04: iomem range 0x0-0x0 could not be reserved PCI: Bus 3, cardbus bridge: 0000:02:06.0 IO window: 0x00003000-0x000030ff IO window: 0x00003400-0x000034ff PREFETCH window: 0x64000000-0x67ffffff MEM window: 0x68000000-0x6bffffff PCI: Bus 7, cardbus bridge: 0000:02:06.1 IO window: 0x00003800-0x000038ff IO window: 0x00003c00-0x00003cff PREFETCH window: 0x6c000000-0x6fffffff MEM window: 0x70000000-0x73ffffff PCI: Bridge: 0000:00:1e.0 IO window: 3000-3fff MEM window: 0xe0200000-0xe07fffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x37 set to 0x1 Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.14a highmem bounce pool size: 64 pages NTFS driver 2.1.29 [Flags: R/W]. fuse init (API version 7.9) io scheduler noop registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device vesafb: framebuffer at 0xe8000000, mapped to 0xf8880000, using 10240k, total 32576k vesafb: mode is 1280x1024x32, linelength=5120, pages=5 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Battery Slot [BAT2] (battery absent) input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button (CM) [SLPB] ACPI: Transitioning device [FAN0] to D3 ACPI: PNP0C0B:00 is registered as cooling_device0 ACPI: Fan [FAN0] (off) ACPI: Transitioning device [FAN1] to D3 ACPI: PNP0C0B:01 is registered as cooling_device1 ACPI: Fan [FAN1] (off) input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/input/input3 ACPI: Video Device [AGP] (multi-head: yes rom: yes post: no) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:00 is registered as cooling_device2 ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [THRM] (50 C) lp: driver loaded but no devices found Real Time Clock Driver v1.12ac intel_rng: FWH not detected ppdev: user-space parallel port driver Linux agpgart interface v0.103 agpgart: Detected an Intel 855GM Chipset. agpgart: Detected 32636K stolen memory. agpgart: AGP aperture is 128M @ 0xe8000000 [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:02.0 to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 PCI: Setting latency timer of device 0000:00:02.1 to 64 [drm] Initialized i915 1.6.0 20060119 on minor 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt for device 0000:00:1f.6 disabled parport_pc 00:08: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] lp0: using parport0 (interrupt-driven). loop: module loaded ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 Switched to high resolution mode on CPU 0 ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0 b44.c:v2.0 eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:c0:9f:29:99:a7 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ata_piix 0000:00:1f.1: version 2.12 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 ata1.00: ATA-6: TOSHIBA MK8026GAX, PA001G, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA ata1.00: configured for UDMA/100 ata2: port disabled. ignoring. scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8026GA PA00 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[e020a000-e020a7ff] Max Packet=[2048] IR/IT contexts=[4/8] ieee1394: raw1394: /dev/raw1394 device initialized eth1394: eth1: IPv4 over IEEE 1394 (fw-host0) Yenta: CardBus bridge found at 0000:02:06.0 [1025:0035] Yenta O2: res at 0x94/0xD4: 00/ea Yenta O2: enabling read prefetch/write burst Yenta: ISA IRQ mask 0x0038, PCI irq 10 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe07fffff Yenta: CardBus bridge found at 0000:02:06.1 [1025:0035] Yenta: ISA IRQ mask 0x0038, PCI irq 10 Socket status: 30000410 Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe07fffff usbmon: debugfs is not available ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 10, io mem 0xe0100000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f00000d5d2d] USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 pccard: PCMCIA card inserted into slot 1 cs: memory probe 0xe0200000-0xe07fffff: excluding 0xe0200000-0xe025ffff<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller pcmcia: registering new device pcmcia1.0 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice usb 4-2: new full speed USB device using uhci_hcd and address 2 usb 4-2: configuration #1 chosen from 1 choice hub 4-2:1.0: USB hub found hub 4-2:1.0: 3 ports detected usb 4-2.3: new full speed USB device using uhci_hcd and address 3 usb 4-2.3: configuration #1 chosen from 1 choice usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 input: PC Speaker as /devices/platform/pcspkr/input/input5 Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 cpuidle: using governor ladder cpuidle: using governor menu Marking TSC unstable due to: TSC halts in idle. Time: acpi_pm clocksource has been installed. input: Logitech USB Trackball as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input7 input: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1d.0-1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC). ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 55886 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.6 to 64 ALSA device list: #0: Intel 82801DB-ICH4 with ALC202 at irq 10 #1: Intel 82801DB-ICH4 Modem at irq 10 Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. ip_tables: (C) 2000-2006 Netfilter Core Team ClusterIP Version 0.8 loaded successfully arp_tables: (C) 2002 David S. Miller TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions NET: Registered protocol family 17 NET: Registered protocol family 15 Using IPI Shortcut mode EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. Clocksource tsc unstable (delta = -72236137 ns) scsi 2:0:0:0: Direct-Access Generic Flash R/W 2002 PQ: 0 ANSI: 2 sd 2:0:0:0: [sdb] Attached SCSI removable disk sd 2:0:0:0: Attached scsi generic sg1 type 0 usb-storage: device scan complete kjournald starting. Commit interval 5 seconds EXT3-fs: sda1: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 720940 ext3_orphan_cleanup: deleting unreferenced inode 720941 ext3_orphan_cleanup: deleting unreferenced inode 720939 ext3_orphan_cleanup: deleting unreferenced inode 720936 ext3_orphan_cleanup: deleting unreferenced inode 720934 ext3_orphan_cleanup: deleting unreferenced inode 720929 ext3_orphan_cleanup: deleting unreferenced inode 720913 EXT3-fs: sda1: 7 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 232k freed ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10 p54: LM86 firmware p54: FW rev 2.7.0.0 - Softmac protocol 4.1 phy0: Selected rate control algorithm 'pid' phy0: hwaddr 00:60:b3:91:45:5b, isl3890 udev: renamed network interface wlan0 to eth1 Adding 2001880k swap on /dev/sda2. Priority:-1 extents:1 across:2001880k EXT3 FS on sda1, internal journal input: Acer hotkey driver as /devices/virtual/input/input8 Acer Travelmate hotkey driver v0.5.35 atkbd.c: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0). atkbd.c: Use 'setkeycodes 00 ' to make it known. ADDRCONF(NETDEV_UP): eth0: link is not ready b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)