[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008 (Ubuntu 2.6.24-19.34-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable) [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf590000 (usable) [ 0.000000] BIOS-e820: 00000000cf590000 - 00000000cf5e3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cf5e3000 - 00000000cf5f0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cf5f0000 - 00000000cf600000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] Warning only 4GB will be used. [ 0.000000] Use a HIGHMEM64G enabled kernel. [ 0.000000] 3200MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f3750 [ 0.000000] Entering add_active_range(0, 0, 1048576) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 1048576 [ 0.000000] On node 0 totalpages: 1048576 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 6400 pages used for memmap [ 0.000000] HighMem zone: 812800 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.5 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F79E0 checksum 0 [ 0.000000] ACPI: RSDP 000F79E0, 0014 (r0 Shuttl) [ 0.000000] ACPI: RSDT CF5E3000, 0038 (r1 Shuttl Shuttle 42302E31 AWRD 0) [ 0.000000] ACPI: FACP CF5E3080, 0074 (r1 Shuttl Shuttle 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT CF5E3100, 4C99 (r1 SHUTTL SG33V10 1000 MSFT 3000000) [ 0.000000] ACPI: FACS CF590000, 0040 [ 0.000000] ACPI: HPET CF5E7E80, 0038 (r1 Shuttl Shuttle 42302E31 AWRD 98) [ 0.000000] ACPI: MCFG CF5E7EC0, 003C (r1 Shuttl Shuttle 42302E31 AWRD 0) [ 0.000000] ACPI: SLIC CF5E7F00, 0176 (r1 Shuttl Shuttle 42302E31 AWRD 0) [ 0.000000] ACPI: APIC CF5E7DC0, 0084 (r1 Shuttl Shuttle 42302E31 AWRD 0) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 7:7 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 7:7 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at d0000000 (gap: cf600000:10a00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384 [ 0.000000] Kernel command line: root=UUID=2af9d7fe-96b1-4cf7-a9e7-a232e335d1cc ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 3003.005 MHz processor. [ 20.009697] Console: colour VGA+ 80x25 [ 20.009700] console [tty0] enabled [ 20.009837] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 20.009994] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 20.123665] Memory: 3350816k/4194304k available (2177k kernel code, 45092k reserved, 1006k data, 368k init, 2479680k highmem) [ 20.123669] virtual kernel memory layout: [ 20.123670] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 20.123671] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 20.123671] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 20.123672] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 20.123672] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 20.123673] .data : 0xc0320434 - 0xc041bdc4 (1006 kB) [ 20.123673] .text : 0xc0100000 - 0xc0320434 (2177 kB) [ 20.123675] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 20.123701] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 20.123786] hpet clockevent registered [ 20.203554] Calibrating delay using timer specific routine.. 6009.69 BogoMIPS (lpj=12019393) [ 20.203567] Security Framework initialized [ 20.203571] SELinux: Disabled at boot. [ 20.203580] AppArmor: AppArmor initialized [ 20.203583] Failure registering capabilities with primary security module. [ 20.203587] Mount-cache hash table entries: 512 [ 20.203662] Initializing cgroup subsys ns [ 20.203665] Initializing cgroup subsys cpuacct [ 20.203671] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e3fd 00000000 00000001 00000000 [ 20.203675] monitor/mwait feature present. [ 20.203676] using mwait in idle threads. [ 20.203679] CPU: L1 I cache: 32K, L1 D cache: 32K [ 20.203680] CPU: L2 cache: 6144K [ 20.203681] CPU: Physical Processor ID: 0 [ 20.203682] CPU: Processor Core ID: 0 [ 20.203683] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0008e3fd 00000000 00000001 00000000 [ 20.203688] Compat vDSO mapped to ffffe000. [ 20.203696] Checking 'hlt' instruction... OK. [ 20.219811] SMP alternatives: switching to UP code [ 20.220897] Early unpacking initramfs... done [ 20.413194] ACPI: Core revision 20070126 [ 20.413218] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 20.416163] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06 [ 20.416172] SMP alternatives: switching to SMP code [ 20.416672] Booting processor 1/1 eip 3000 [ 20.427117] Initializing CPU#1 [ 20.506655] Calibrating delay using timer specific routine.. 6005.79 BogoMIPS (lpj=12011589) [ 20.506659] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e3fd 00000000 00000001 00000000 [ 20.506663] monitor/mwait feature present. [ 20.506665] CPU: L1 I cache: 32K, L1 D cache: 32K [ 20.506666] CPU: L2 cache: 6144K [ 20.506667] CPU: Physical Processor ID: 0 [ 20.506668] CPU: Processor Core ID: 1 [ 20.506669] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0008e3fd 00000000 00000001 00000000 [ 20.507475] CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06 [ 20.507488] Total of 2 processors activated (12015.49 BogoMIPS). [ 20.507622] ENABLING IO-APIC IRQs [ 20.507775] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 20.654286] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 20.674237] Brought up 2 CPUs [ 20.674253] CPU0 attaching sched-domain: [ 20.674255] domain 0: span 03 [ 20.674256] groups: 01 02 [ 20.674257] CPU1 attaching sched-domain: [ 20.674258] domain 0: span 03 [ 20.674259] groups: 02 01 [ 20.674384] net_namespace: 64 bytes [ 20.674389] Booting paravirtualized kernel on bare hardware [ 20.674641] Time: 1:08:46 Date: 06/27/08 [ 20.674658] NET: Registered protocol family 16 [ 20.674760] EISA bus registered [ 20.674763] ACPI: bus type pci registered [ 20.675483] PCI: PCI BIOS revision 3.00 entry at 0xfa030, last bus=3 [ 20.675484] PCI: Using configuration type 1 [ 20.675491] Setting up standard PCI resources [ 20.678666] ACPI: EC: Look up EC in DSDT [ 20.681131] ACPI: Interpreter enabled [ 20.681133] ACPI: (supports S0 S3 S4 S5) [ 20.681140] ACPI: Using IOAPIC for interrupt routing [ 20.683949] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 20.684524] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 20.684526] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 20.684928] PCI: Transparent bridge - 0000:00:1e.0 [ 20.684947] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 20.685036] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 20.685082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 20.685131] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 20.694240] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 20.694304] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 20.694367] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 9 10 11 12 14 15) [ 20.694430] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 20.694492] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 20.694555] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 20.694618] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 20.694680] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 20.694748] Linux Plug and Play Support v0.97 (c) Adam Belay [ 20.694764] pnp: PnP ACPI init [ 20.694768] ACPI: bus type pnp registered [ 20.696152] pnpacpi: exceeded the max number of mem resources: 12 [ 20.696184] pnp: PnP ACPI: found 12 devices [ 20.696185] ACPI: ACPI bus type pnp unregistered [ 20.696187] PnPBIOS: Disabled by ACPI PNP [ 20.696303] PCI: Using ACPI for IRQ routing [ 20.696304] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 20.734079] NET: Registered protocol family 8 [ 20.734081] NET: Registered protocol family 20 [ 20.734110] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 20.734112] hpet0: 4 64-bit timers, 14318180 Hz [ 20.735130] AppArmor: AppArmor Filesystem Enabled [ 20.737977] Time: tsc clocksource has been installed. [ 20.746029] Switched to high resolution mode on CPU 1 [ 20.749944] Switched to high resolution mode on CPU 0 [ 20.761905] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 20.761908] system 00:01: ioport range 0x800-0x87f has been reserved [ 20.761910] system 00:01: ioport range 0x290-0x297 has been reserved [ 20.761912] system 00:01: ioport range 0x880-0x88f has been reserved [ 20.761919] system 00:08: ioport range 0x400-0x4bf could not be reserved [ 20.761924] system 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved [ 20.761929] system 00:0b: iomem range 0xf0000-0xfffff could not be reserved [ 20.761931] system 00:0b: iomem range 0xcf600000-0xcf6fffff has been reserved [ 20.761933] system 00:0b: iomem range 0xfed00000-0xfed000ff could not be reserved [ 20.761936] system 00:0b: iomem range 0xcf590000-0xcf5fffff could not be reserved [ 20.761938] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 20.761940] system 00:0b: iomem range 0x100000-0xcf58ffff could not be reserved [ 20.761942] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 20.761945] system 00:0b: iomem range 0xfed14000-0xfed1dfff could not be reserved [ 20.761947] system 00:0b: iomem range 0xfed20000-0xfed9ffff could not be reserved [ 20.761949] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved [ 20.761951] system 00:0b: iomem range 0xffb00000-0xffb7ffff could not be reserved [ 20.761954] system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved [ 20.792100] PCI: Bridge: 0000:00:1c.0 [ 20.792102] IO window: c000-cfff [ 20.792105] MEM window: fd900000-fd9fffff [ 20.792107] PREFETCH window: fd800000-fd8fffff [ 20.792110] PCI: Bridge: 0000:00:1c.1 [ 20.792112] IO window: d000-dfff [ 20.792115] MEM window: fd700000-fd7fffff [ 20.792117] PREFETCH window: fdd00000-fddfffff [ 20.792120] PCI: Bridge: 0000:00:1e.0 [ 20.792121] IO window: b000-bfff [ 20.792124] MEM window: fdb00000-fdbfffff [ 20.792126] PREFETCH window: fda00000-fdafffff [ 20.792141] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 20.792144] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 20.792156] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 20.792159] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 20.792166] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 20.792171] NET: Registered protocol family 2 [ 20.829720] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 20.829856] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 20.830091] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 20.830198] TCP: Hash tables configured (established 131072 bind 65536) [ 20.830200] TCP reno registered [ 20.841736] checking if image is initramfs... it is [ 21.220140] Freeing initrd memory: 7301k freed [ 21.220574] audit: initializing netlink socket (disabled) [ 21.220583] audit(1214528925.973:1): initialized [ 21.220745] highmem bounce pool size: 64 pages [ 21.221782] VFS: Disk quotas dquot_6.5.1 [ 21.221823] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 21.221897] io scheduler noop registered [ 21.221898] io scheduler anticipatory registered [ 21.221899] io scheduler deadline registered [ 21.221905] io scheduler cfq registered (default) [ 21.221913] Boot video device is 0000:00:02.0 [ 21.222057] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 21.222085] assign_interrupt_mode Found MSI capability [ 21.222110] Allocate Port Service[0000:00:1c.0:pcie00] [ 21.222128] Allocate Port Service[0000:00:1c.0:pcie02] [ 21.222178] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 21.222205] assign_interrupt_mode Found MSI capability [ 21.222227] Allocate Port Service[0000:00:1c.1:pcie00] [ 21.222243] Allocate Port Service[0000:00:1c.1:pcie02] [ 21.222375] isapnp: Scanning for PnP cards... [ 21.574293] isapnp: No Plug & Play device found [ 21.587614] Real Time Clock Driver v1.12ac [ 21.587716] hpet_resources: 0xfed00000 is busy [ 21.587739] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 21.588350] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 21.588387] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 21.588459] PNP: No PS/2 controller found. Probing ports directly. [ 21.621858] Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 21.621860] If AUX port is really absent please use the 'i8042.noaux' option. [ 21.870682] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 21.890598] mice: PS/2 mouse device common for all mice [ 21.890675] EISA: Probing bus 0 at eisa.0 [ 21.890695] EISA: Detected 0 cards. [ 21.890697] cpuidle: using governor ladder [ 21.890698] cpuidle: using governor menu [ 21.890739] NET: Registered protocol family 1 [ 21.890753] Using IPI No-Shortcut mode [ 21.890769] registered taskstats version 1 [ 21.890830] Magic number: 12:196:105 [ 21.890846] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 21.890847] EDD information not available. [ 21.890950] Freeing unused kernel memory: 368k freed [ 23.003671] fuse init (API version 7.9) [ 23.012468] ACPI: Fan [FAN] (on) [ 23.015906] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 23.015912] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 23.016658] ACPI: Thermal Zone [THRM] (40 C) [ 23.084362] usbcore: registered new interface driver usbfs [ 23.084373] usbcore: registered new interface driver hub [ 23.084595] usbcore: registered new device driver usb [ 23.085391] USB Universal Host Controller Interface driver v3.0 [ 23.085422] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 23.085428] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 23.085431] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 23.085515] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 23.085536] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00 [ 23.085604] usb usb1: configuration #1 chosen from 1 choice [ 23.085616] hub 1-0:1.0: USB hub found [ 23.085619] hub 1-0:1.0: 2 ports detected [ 23.187746] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 18 [ 23.187752] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 23.187755] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 23.187767] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 23.187786] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000fd00 [ 23.187846] usb usb2: configuration #1 chosen from 1 choice [ 23.187858] hub 2-0:1.0: USB hub found [ 23.187861] hub 2-0:1.0: 2 ports detected [ 23.231681] SCSI subsystem initialized [ 23.252044] libata version 3.00 loaded. [ 23.291452] ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 19 [ 23.291459] PCI: Setting latency timer of device 0000:00:1a.2 to 64 [ 23.291461] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 23.291473] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 [ 23.291494] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00 [ 23.291555] usb usb3: configuration #1 chosen from 1 choice [ 23.291568] hub 3-0:1.0: USB hub found [ 23.291570] hub 3-0:1.0: 2 ports detected [ 23.395151] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 23.395158] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 23.395160] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 23.395172] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 23.395191] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000fb00 [ 23.395249] usb usb4: configuration #1 chosen from 1 choice [ 23.395261] hub 4-0:1.0: USB hub found [ 23.395264] hub 4-0:1.0: 2 ports detected [ 23.498822] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 23.498828] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 23.498831] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 23.498850] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 23.498869] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00 [ 23.498932] usb usb5: configuration #1 chosen from 1 choice [ 23.498944] hub 5-0:1.0: USB hub found [ 23.498946] hub 5-0:1.0: 2 ports detected [ 23.529678] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 23.602511] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21 [ 23.602517] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 23.602520] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 23.602536] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 23.602556] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000f900 [ 23.602620] usb usb6: configuration #1 chosen from 1 choice [ 23.602632] hub 6-0:1.0: USB hub found [ 23.602635] hub 6-0:1.0: 2 ports detected [ 23.699377] usb 2-1: configuration #1 chosen from 1 choice [ 23.706286] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 21 [ 23.706292] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 23.706294] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 23.706305] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7 [ 23.710201] ehci_hcd 0000:00:1a.7: debug port 1 [ 23.710205] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 23.710207] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xfdfff000 [ 23.726093] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 23.726150] usb usb7: configuration #1 chosen from 1 choice [ 23.726164] hub 7-0:1.0: USB hub found [ 23.726166] hub 7-0:1.0: 6 ports detected [ 23.828841] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 [ 23.828848] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 23.828851] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 23.828867] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 23.832761] ehci_hcd 0000:00:1d.7: debug port 1 [ 23.832764] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 23.832767] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfdffe000 [ 23.844741] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 23.844813] usb usb8: configuration #1 chosen from 1 choice [ 23.844832] hub 8-0:1.0: USB hub found [ 23.844835] hub 8-0:1.0: 6 ports detected [ 23.948561] ACPI: PCI Interrupt 0000:03:0a.0[A] -> GSI 18 (level, low) -> IRQ 21 [ 23.998118] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fdbff000-fdbff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 23.998156] ahci 0000:00:1f.2: version 3.0 [ 23.998168] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19 [ 24.411074] usb 2-1: USB disconnect, address 2 [ 24.650345] usb 2-1: new full speed USB device using uhci_hcd and address 3 [ 24.820109] usb 2-1: configuration #1 chosen from 1 choice [ 24.998329] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 24.998332] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part [ 24.998335] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 24.998543] scsi0 : ahci [ 24.998614] scsi1 : ahci [ 24.998680] scsi2 : ahci [ 24.998744] scsi3 : ahci [ 24.998806] scsi4 : ahci [ 24.998870] scsi5 : ahci [ 24.998924] ata1: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd100 irq 221 [ 24.998926] ata2: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd180 irq 221 [ 24.998927] ata3: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd200 irq 221 [ 24.998929] ata4: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd280 irq 221 [ 24.998931] ata5: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd300 irq 221 [ 24.998932] ata6: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd380 irq 221 [ 25.264587] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00301bbc0000b3bb] [ 25.304402] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 25.489171] usb 3-2: configuration #1 chosen from 1 choice [ 25.727144] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 25.902964] usb 4-1: configuration #1 chosen from 1 choice [ 25.905912] hub 4-1:1.0: USB hub found [ 25.907888] hub 4-1:1.0: 3 ports detected [ 26.218986] usb 4-1.3: new full speed USB device using uhci_hcd and address 3 [ 26.364616] usb 4-1.3: configuration #1 chosen from 1 choice [ 26.369548] usbcore: registered new interface driver hiddev [ 26.387572] input: Shuttle Inc VFD Module as /devices/pci0000:00/0000:00:1a.2/usb3/3-2/3-2:1.0/input/input1 [ 26.405145] input,hidraw0: USB HID v1.11 Keyboard [Shuttle Inc VFD Module] on usb-0000:00:1a.2-2 [ 26.413470] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: couldn't find an input interrupt endpoint [ 26.432399] input: Shuttle Inc VFD Module as /devices/pci0000:00/0000:00:1a.2/usb3/3-2/3-2:1.2/input/input2 [ 26.450005] input,hidraw1: USB HID v1.11 Device [Shuttle Inc VFD Module] on usb-0000:00:1a.2-2 [ 26.454449] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.0/input/input3 [ 26.469946] input,hidraw2: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1d.0-1.3 [ 26.476268] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.1/input/input4 [ 26.493878] input,hidraw3: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1d.0-1.3 [ 26.493889] usbcore: registered new interface driver usbhid [ 26.493891] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 26.640430] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 26.686235] ata1.00: ATA-7: ST3500630AS, 3.AAE, max UDMA/133 [ 26.686237] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 26.744372] ata1.00: configured for UDMA/133 [ 27.063173] ata2: SATA link down (SStatus 0 SControl 300) [ 27.382224] ata3: SATA link down (SStatus 0 SControl 300) [ 27.702272] ata4: SATA link down (SStatus 0 SControl 300) [ 28.020327] ata5: SATA link down (SStatus 0 SControl 300) [ 28.339378] ata6: SATA link down (SStatus 0 SControl 300) [ 28.339469] scsi 0:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5 [ 28.339651] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 28.339672] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 28.339682] ACPI: PCI interrupt for device 0000:01:00.0 disabled [ 28.341090] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 28.341108] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 28.341321] scsi6 : pata_jmicron [ 28.341527] scsi7 : pata_jmicron [ 28.341659] ata7: PATA max UDMA/100 cmd 0xcf00 ctl 0xce00 bmdma 0xcb00 irq 16 [ 28.341661] ata8: PATA max UDMA/100 cmd 0xcd00 ctl 0xcc00 bmdma 0xcb08 irq 16 [ 28.345361] Driver 'sd' needs updating - please use bus_type methods [ 28.355352] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 28.355362] sd 0:0:0:0: [sda] Write Protect is off [ 28.355364] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 28.355377] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.355415] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 28.355423] sd 0:0:0:0: [sda] Write Protect is off [ 28.355425] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 28.355441] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.355443] sda: sda1 sda2 < sda5 > [ 28.390127] sd 0:0:0:0: [sda] Attached SCSI disk [ 28.392894] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 28.649408] Attempting manual resume [ 28.649409] swsusp: Resume From Partition 8:5 [ 28.649410] PM: Checking swsusp image. [ 28.649564] PM: Resume from disk failed. [ 28.688416] kjournald starting. Commit interval 5 seconds [ 28.688421] EXT3-fs: mounted filesystem with ordered data mode. [ 35.453276] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 35.671606] iTCO_vendor_support: vendor-support=0 [ 35.795650] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 35.795693] iTCO_wdt: Found a ICH9DH TCO device (Version=2, TCOBASE=0x0460) [ 35.795718] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 35.861237] parport_pc 00:07: reported by Plug and Play ACPI [ 35.861282] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 35.921857] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 35.929906] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 35.951699] Linux agpgart interface v0.102 [ 35.993693] input: Power Button (FF) as /devices/virtual/input/input6 [ 36.052455] ACPI: Power Button (FF) [PWRF] [ 36.052487] input: Power Button (CM) as /devices/virtual/input/input7 [ 36.064388] agpgart: Detected an Intel G33 Chipset. [ 36.066617] agpgart: Detected 7164K stolen memory. [ 36.078437] agpgart: AGP aperture is 256M @ 0xd0000000 [ 36.124242] ACPI: Power Button (CM) [PWRB] [ 36.419727] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 36.419735] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 36.419752] sky2 0000:02:00.0: v1.20 addr 0xfd7fc000 irq 17 Yukon-EC Ultra (0xb4) rev 5 [ 36.420009] sky2 eth0: addr 00:30:1b:bc:b2:bb [ 36.430005] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 36.430015] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 36.461072] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 37.081233] loop: module loaded [ 37.098338] lp0: using parport0 (interrupt-driven). [ 37.162781] Adding 9839772k swap on /dev/sda5. Priority:-1 extents:1 across:9839772k [ 37.692257] EXT3 FS on sda1, internal journal [ 38.690582] ip_tables: (C) 2000-2006 Netfilter Core Team [ 38.967448] No dock devices found. [ 39.762049] NET: Registered protocol family 10 [ 39.762168] lo: Disabled Privacy Extensions [ 39.906951] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 39.906953] apm: disabled - APM is not SMP safe. [ 40.026529] ppdev: user-space parallel port driver [ 40.153111] audit(1214528946.131:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5121 profile="/usr/sbin/cupsd" namespace="default" [ 40.599044] sky2 eth0: enabling interface [ 40.602396] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 40.668758] Bluetooth: Core ver 2.11 [ 40.668883] NET: Registered protocol family 31 [ 40.668884] Bluetooth: HCI device and connection manager initialized [ 40.668887] Bluetooth: HCI socket layer initialized [ 40.709693] Bluetooth: L2CAP ver 2.9 [ 40.709695] Bluetooth: L2CAP socket layer initialized [ 40.736640] Bluetooth: RFCOMM socket layer initialized [ 40.736645] Bluetooth: RFCOMM TTY layer initialized [ 40.736646] Bluetooth: RFCOMM ver 1.8 [ 42.298786] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 42.299785] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 43.026542] mtrr: no more MTRRs available [ 43.026555] mtrr: no more MTRRs available [ 43.026566] mtrr: no more MTRRs available [ 43.026576] mtrr: no more MTRRs available [ 43.026586] mtrr: no more MTRRs available [ 43.026596] mtrr: no more MTRRs available [ 43.026606] mtrr: no more MTRRs available [ 44.419094] NET: Registered protocol family 17 [ 55.522724] eth0: no IPv6 routers present [ 400.777360] RPC: Registered udp transport module. [ 400.777363] RPC: Registered tcp transport module. [ 519.423038] smb_fill_super: missing data argument [ 661.706118] smb_fill_super: missing data argument [ 668.492095] CIFS VFS: cifs_mount failed w/return code = -22 [ 3561.837849] [drm] Initialized drm 1.1.0 20060810 [ 3561.864437] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 3561.864442] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 3561.864480] [drm] Initialized i915 1.13.0 20080312 on minor 0 [ 3561.871742] mtrr: no more MTRRs available [ 3643.156321] mtrr: no more MTRRs available [ 3897.411540] compiz.real[7621]: segfault at 00000018 eip 08055a80 esp bfe61d80 error 4 [ 3901.381068] mtrr: no more MTRRs available [ 4693.157521] compiz.real[8898]: segfault at 00000002 eip 08789e10 esp bfbcf49c error 6 [ 4699.527712] mtrr: no more MTRRs available