Linux version 2.6.24-gentoo-r3 (root@DS20L) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #9 SMP Mon May 12 22:00:37 EDT 2008
Booting on Tsunami variation Shark using machine vector Shark from SRM
Major Options: SMP EV67 LEGACY_START 
Command line: root=/dev/sda2 console=tty0 console=ttyS0,9600n8
memcluster 0, usage 1, start        0, end      256
memcluster 1, usage 0, start      256, end   130989
memcluster 2, usage 1, start   130989, end   131072
memcluster 3, usage 0, start   131072, end   262142
memcluster 4, usage 1, start   262142, end   262144
freeing pages 256:384
freeing pages 972:130989
freeing pages 131072:262142
reserving pages 972:976
4096K Bcache detected; load hit latency 24 cycles, load miss latency 176 cycles
SMP: 2 CPUs probed -- cpu_present_map = 3
On node 0 totalpages: 262142
  DMA zone: 1791 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 260351 pages, LIFO batch:15
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260351
Kernel command line: root=/dev/sda2 console=tty0 console=ttyS0,9600n8
PID hash table entries: 4096 (order: 12, 32768 bytes)
Using epoch = 1952
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Dentry cache hash table entries: 262144 (order: 8, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 7, 1048576 bytes)
Memory: 2069320k/2097136k available (3143k kernel code, 24392k reserved, 224k data, 136k init)
SLUB: Genslabs=12, HWalign=64, Order=0-2, MinObjects=8, CPUs=2, Nodes=1
Calibrating delay loop... 1661.52 BogoMIPS (lpj=811008)
Mount-cache hash table entries: 512
SMP starting up secondaries.
Calibrating delay loop... 1657.40 BogoMIPS (lpj=808960)
Brought up 2 CPUs
SMP: Total of 2 processors activated (3324.17 BogoMIPS).
net_namespace: 120 bytes
NET: Registered protocol family 16
PCI quirk: region 7e20-7e3f claimed by ali7101 SMB
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 524288 bytes)
TCP established hash table entries: 262144 (order: 9, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 7, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
srm_env: version 0.0.6 loaded successfully
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
io scheduler noop registered
io scheduler cfq registered (default)
PCI: Firmware left 0000:00:04.0 e100 interrupts enabled, disabling
Activating ISA DMA hang workarounds.
PCI: Firmware left 0001:01:03.0 e100 interrupts enabled, disabling
rtc: Digital UNIX epoch (1952) detected
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100: eth0: e100_probe: addr 0x9052000, irq 36, MAC addr 00:02:56:00:16:40
e100: eth1: e100_probe: addr 0x209200000, irq 48, MAC addr 00:02:56:00:16:41
sym0: <1010-66> rev 0x1 at pci 0000:00:03.0 irq 32
sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.3
scsi 0:0:1:0: Direct-Access     SEAGATE  ST318451LC       0003 PQ: 0 ANSI: 3
 target0:0:1: tagged command queuing enabled, command queue depth 16.
 target0:0:1: Beginning Domain Validation
 target0:0:1: asynchronous
 target0:0:1: wide asynchronous
 target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
 target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
 target0:0:1: Ending Domain Validation
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:1:0: [sda] 35843671 512-byte hardware sectors (18352 MB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: a3 00 10 08
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:1:0: [sda] 35843671 512-byte hardware sectors (18352 MB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: a3 00 10 08
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sda: sda1 sda2 sda3
sd 0:0:1:0: [sda] Attached SCSI disk
scsi1 : pata_ali
scsi2 : pata_ali
ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0x8840 irq 14
ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0x8848 irq 15
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0001:01:04.0: OHCI Host Controller
ohci_hcd 0001:01:04.0: new USB bus registered, assigned bus number 1
ohci_hcd 0001:01:04.0: irq 52, io mem 0x209201000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
mice: PS/2 mouse device common for all mice
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 136k freed
EXT3 FS on sda2, internal journal
Adding 1004040k swap on /dev/sda1.  Priority:-1 extents:1 across:1004040k