(power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 3E6E1A6A, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) ACPI: SSDT 3E6E1DB4, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [THM0] (50 C) ACPI: LNXTHERM:02 is registered as thermal_zone1 ACPI: Thermal Zone [THM1] (47 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 agpgart: Detected an Intel 965GM Chipset. agpgart: Detected 7676K stolen memory. agpgart: AGP aperture is 256M @ 0xe0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial 00:0a: activated 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 17 0000:00:03.3: ttyS1 at I/O 0x1830 (irq = 17) is a 16550A brd: module loaded input: Macintosh mouse button emulation as /class/input/input0 Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6] Yenta: ISA IRQ mask 0x0cb8, PCI irq 16 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x7000 - 0xafff cs: IO port probe 0x7000-0xafff: clean. pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 244k freed Write protecting the kernel text: 2028k Write protecting the kernel read-only data: 904k ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 serio: Synaptics pass-through port at isa0060/serio1/input0 ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected input: SynPS/2 Synaptics TouchPad as /class/input/input2 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 1-4: new high speed USB device using ehci_hcd and address 3 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb 1-4: configuration #1 chosen from 1 choice hub 1-4:1.0: USB hub found hub 1-4:1.0: 7 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 usb 3-2: new full speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice usb 1-4.7: new low speed USB device using ehci_hcd and address 4 usb 1-4.7: configuration #1 chosen from 1 choice input: HID 413c:3010 as /class/input/input3 input: USB HID v1.00 Mouse [HID 413c:3010] on usb-0000:00:1a.7-4.7 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 218 ata2: DUMMY ata3: DUMMY ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: ATA-7: ST9120822AS, 3.CLF, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: configured for UDMA/100 ata1.00: configured for UDMA/100 ata1: EH complete scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.CL PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 > sd 0:0:0:0: [sda] Attached SCSI disk ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi3 : ata_piix scsi4 : ata_piix ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14 ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15 ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-U10N, 1.05, max UDMA/33 ata4.00: configured for UDMA/33 ata5: port disabled. ignoring. scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U10N 1.05 PQ: 0 ANSI: 5 IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input4 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Clocksource tsc unstable (delta = -248732109 ns) thinkpad_acpi: ThinkPad ACPI Extras v0.20 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 7LETA9WW (2.09 ), EC 7KHT24WW-1.08 thinkpad_acpi: Lenovo ThinkPad T61, model 646557U thinkpad_acpi: radio switch found; radios are disabled thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... Registered led device: tpacpi::thinklight Registered led device: tpacpi::power Registered led device: tpacpi:orange:batt Registered led device: tpacpi:green:batt Registered led device: tpacpi::dock_active Registered led device: tpacpi::bay_active Registered led device: tpacpi::dock_batt Registered led device: tpacpi::unknown_led Registered led device: tpacpi::standby thinkpad_acpi: Lenovo BIOS switched to ACPI backlight control mode thinkpad_acpi: standard ACPI backlight interface available, not loading native one... input: ThinkPad Extra Buttons as /class/input/input5 cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 3:0:0:0: Attached scsi generic sg1 type 5 ACPI: AC Adapter [AC] (on-line) ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler ACPI: Error installing bay notify handler input: Power Button (FF) as /class/input/input6 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input7 ACPI: Battery Slot [BAT0] (battery present) ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input8 ACPI: Sleep Button (CM) [SLPB] Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 input: PC Speaker as /class/input/input9 ACPI: device:03 is registered as cooling_device2 input: Video Bus as /class/input/input10 iTCO_vendor_support: vendor-support=0 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI: device:08 is registered as cooling_device3 input: Video Bus as /class/input/input11 ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:19.0 to 64 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) eth0: (PCI Express:2.5GB/s:Width x1) 00:1a:6b:36:06:77 eth0: Intel(R) PRO/1000 Network Connection eth0: MAC: 4, PHY: 6, PBA No: ffffff-0ff ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23 parport_pc 00:0b: reported by Plug and Play ACPI parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci: SDHCI controller found at 0000:15:00.2 [1180:0822] (rev 21) ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18 mmc0: Will use DMA mode even though HW doesn't fully claim to support it. PCI: Setting latency timer of device 0000:15:00.2 to 64 Registered led device: mmc0 mmc0: SDHCI at 0xf8301800 irq 18 DMA ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:15:00.1 to 64 firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI version 1.10 firewire_core: created device fw0: GUID 00061b032a10026e, S400 iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26k iwl3945: Copyright(c) 2003-2008 Intel Corporation ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:03:00.0 to 64 iwl3945: Detected Intel Wireless WiFi Link 3945ABG iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels phy0: Selected rate control algorithm 'iwl-3945-rs' ACPI: PCI interrupt for device 0000:03:00.0 disabled ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 hda_intel: probe_mask set to 0x1 for device 17aa:20ac PCI: Setting latency timer of device 0000:00:1b.0 to 64 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda3, internal journal Adding 1020088k swap on /dev/sda5. Priority:-1 extents:1 across:1020088k Adding 498004k swap on /dev/sda2. Priority:-2 extents:1 across:498004k firmware: requesting intel-ucode/06-0f-0d firmware: requesting intel-ucode/06-0f-0d IA-32 Microcode Update Driver: v1.14a warning: process `kudzu' used the deprecated sysctl system call with 1.23. NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None eth0: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100102, writing 100106) firmware: requesting iwlwifi-3945-1.ucode iwl3945: Radio disabled by HW RF Kill switch ACPI: PCI interrupt for device 0000:03:00.0 disabled ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100102, writing 100106) iwl3945: Radio disabled by HW RF Kill switch ACPI: PCI interrupt for device 0000:03:00.0 disabled ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100102, writing 100106) iwl3945: Radio disabled by HW RF Kill switch ACPI: PCI interrupt for device 0000:03:00.0 disabled ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100102, writing 100106) iwl3945: Radio disabled by HW RF Kill switch ACPI: PCI interrupt for device 0000:03:00.0 disabled eth0: no IPv6 routers present RPC: Registered udp transport module. RPC: Registered tcp transport module. warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use) Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bridge firewalling registered virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) virbr0: no IPv6 routers present [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 [drm] Initialized i915 1.13.0 20080312 on minor 0 PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Entering mem sleep Suspending console(s) drm_sysfs_suspend ACPI: PCI interrupt for device 0000:00:02.0 disabled sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:0b: disabled serial 00:0a: disabled ACPI handle has no context! ACPI: PCI interrupt for device 0000:15:00.2 disabled ACPI handle has no context! ACPI handle has no context! ata5: port disabled. ignoring. ACPI: PCI interrupt for device 0000:00:1f.1 disabled ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled ACPI: PCI interrupt for device 0000:00:1b.0 disabled ACPI: PCI interrupt for device 0000:00:1a.7 disabled ACPI: PCI interrupt for device 0000:00:1a.1 disabled ACPI: PCI interrupt for device 0000:00:1a.0 disabled ACPI: PCI interrupt for device 0000:00:19.0 disabled ACPI handle has no context! ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. kvm: disabling virtualization on CPU1 Breaking affinity for irq 9 Breaking affinity for irq 17 Breaking affinity for irq 217 CPU 1 is now offline SMP alternatives: switching to UP code CPU0 attaching sched-domain: domain 0: span 0 groups: 0 CPU1 is down Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Back to C! Enabling non-boot CPUs ... CPU0 attaching NULL sched-domain. SMP alternatives: switching to SMP code CPU 1 irqstacks, hard=c0778000 soft=c0758000 Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3591.04 BogoMIPS (lpj=1795524) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d kvm: enabling virtualization on CPU1 CPU0 attaching sched-domain: domain 0: span 0-1 groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 groups: 1 0 CPU1 is up Switched to high resolution mode on CPU 1 ACPI: EC: non-query interrupt received, switching to interrupt mode PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003) PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007) PM: Writing back config space on device 0000:00:03.0 at offset f (was 100, writing 10a) PM: Writing back config space on device 0000:00:03.0 at offset 1 (was 180006, writing 100006) PM: Writing back config space on device 0000:00:03.2 at offset f (was 300, writing 30b) PM: Writing back config space on device 0000:00:03.3 at offset f (was 200, writing 20b) ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:19.0 to 64 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.0 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1a.7 to 64 PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1b.0 to 64 PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20002020, writing 2020) PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.0 to 64 PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.1 to 64 PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20004040, writing 4040) PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.2 to 64 PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20005050, writing 5050) PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.3 to 64 PM: Writing back config space on device 0000:00:1c.4 at offset 7 (was 20006060, writing 6060) PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb5: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb6: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb7: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005) ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata5: port disabled. ignoring. PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407) PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata4.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata4.00: configured for UDMA/33 PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing f8301000) PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000) PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006) PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing f8301800) PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000) PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006) ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18 serial 00:0a: activated parport_pc 00:0b: activated ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: configured for UDMA/100 ata1.00: configured for UDMA/100 ata1: EH complete sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None eth0: 10/100 speed: disabling TSO sd 0:0:0:0: [sda] Starting disk ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 PM: Finishing wakeup. Restarting tasks ... done. usb 3-2: USB disconnect, address 2 usb 3-2: new full speed USB device using uhci_hcd and address 3 usb 3-2: configuration #1 chosen from 1 choice PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Entering mem sleep Suspending console(s) drm_sysfs_suspend ACPI: PCI interrupt for device 0000:00:02.0 disabled sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:0b: disabled serial 00:0a: disabled ACPI handle has no context! ACPI: PCI interrupt for device 0000:15:00.2 disabled ACPI handle has no context! ACPI handle has no context! ata5: port disabled. ignoring. ACPI: PCI interrupt for device 0000:00:1f.1 disabled ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled ACPI: PCI interrupt for device 0000:00:1b.0 disabled ACPI: PCI interrupt for device 0000:00:1a.7 disabled ACPI: PCI interrupt for device 0000:00:1a.1 disabled ACPI: PCI interrupt for device 0000:00:1a.0 disabled ACPI: PCI interrupt for device 0000:00:19.0 disabled ACPI handle has no context! ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. kvm: disabling virtualization on CPU1 CPU 1 is now offline SMP alternatives: switching to UP code CPU0 attaching sched-domain: domain 0: span 0 groups: 0 CPU1 is down Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Back to C! Enabling non-boot CPUs ... CPU0 attaching NULL sched-domain. SMP alternatives: switching to SMP code CPU 1 irqstacks, hard=c0778000 soft=c0758000 Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3591.08 BogoMIPS (lpj=1795540) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d kvm: enabling virtualization on CPU1 CPU0 attaching sched-domain: domain 0: span 0-1 groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 groups: 1 0 CPU1 is up Switched to high resolution mode on CPU 1 ACPI: EC: non-query interrupt received, switching to interrupt mode PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003) PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007) PM: Writing back config space on device 0000:00:03.0 at offset f (was 100, writing 10a) PM: Writing back config space on device 0000:00:03.2 at offset f (was 300, writing 30b) PM: Writing back config space on device 0000:00:03.3 at offset f (was 200, writing 20b) ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:19.0 to 64 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.0 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1a.7 to 64 PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1b.0 to 64 PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.0 to 64 PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.1 to 64 PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.2 to 64 PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.3 to 64 PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb5: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb6: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb7: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005) ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata5: port disabled. ignoring. PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407) PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata4.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata4.00: configured for UDMA/33 PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing f8301000) PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000) PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006) PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing f8301800) PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000) PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006) ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18 serial 00:0a: activated parport_pc 00:0b: activated ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: configured for UDMA/100 ata1.00: configured for UDMA/100 ata1: EH complete sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None eth0: 10/100 speed: disabling TSO sd 0:0:0:0: [sda] Starting disk ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 PM: Finishing wakeup. Restarting tasks ... done. usb 3-2: USB disconnect, address 3 usb 3-2: new full speed USB device using uhci_hcd and address 4 usb 3-2: configuration #1 chosen from 1 choice PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.04 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Entering mem sleep Suspending console(s) drm_sysfs_suspend ACPI: PCI interrupt for device 0000:00:02.0 disabled sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:0b: disabled serial 00:0a: disabled ACPI handle has no context! ACPI: PCI interrupt for device 0000:15:00.2 disabled ACPI handle has no context! ACPI handle has no context! ata5: port disabled. ignoring. ACPI: PCI interrupt for device 0000:00:1f.1 disabled ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled ACPI: PCI interrupt for device 0000:00:1b.0 disabled ACPI: PCI interrupt for device 0000:00:1a.7 disabled ACPI: PCI interrupt for device 0000:00:1a.1 disabled ACPI: PCI interrupt for device 0000:00:1a.0 disabled ACPI: PCI interrupt for device 0000:00:19.0 disabled ACPI handle has no context! ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. kvm: disabling virtualization on CPU1 CPU 1 is now offline SMP alternatives: switching to UP code CPU0 attaching sched-domain: domain 0: span 0 groups: 0 CPU1 is down Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Back to C! Enabling non-boot CPUs ... CPU0 attaching NULL sched-domain. SMP alternatives: switching to SMP code CPU 1 irqstacks, hard=c0778000 soft=c0758000 Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3591.05 BogoMIPS (lpj=1795525) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d kvm: enabling virtualization on CPU1 CPU0 attaching sched-domain: domain 0: span 0-1 groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 groups: 1 0 CPU1 is up Switched to high resolution mode on CPU 1 ACPI: EC: non-query interrupt received, switching to interrupt mode PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003) PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007) PM: Writing back config space on device 0000:00:03.0 at offset f (was 100, writing 10a) PM: Writing back config space on device 0000:00:03.2 at offset f (was 300, writing 30b) PM: Writing back config space on device 0000:00:03.3 at offset f (was 200, writing 20b) ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:19.0 to 64 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.0 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1a.7 to 64 PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1b.0 to 64 PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.0 to 64 PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.1 to 64 PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.2 to 64 PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.3 to 64 PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb5: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb6: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb7: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005) ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata5: port disabled. ignoring. PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407) PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata4.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata4.00: configured for UDMA/33 PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing f8301000) PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000) PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006) PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing f8301800) PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000) PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006) ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18 serial 00:0a: activated parport_pc 00:0b: activated ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: configured for UDMA/100 ata1.00: configured for UDMA/100 ata1: EH complete sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None eth0: 10/100 speed: disabling TSO sd 0:0:0:0: [sda] Starting disk ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 PM: Finishing wakeup. Restarting tasks ... done. usb 3-2: USB disconnect, address 4 usb 3-2: new full speed USB device using uhci_hcd and address 5 usb 3-2: configuration #1 chosen from 1 choice PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.04 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Entering mem sleep Suspending console(s) drm_sysfs_suspend ACPI: PCI interrupt for device 0000:00:02.0 disabled sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:0b: disabled serial 00:0a: disabled ACPI handle has no context! ACPI: PCI interrupt for device 0000:15:00.2 disabled ACPI handle has no context! ACPI handle has no context! ata5: port disabled. ignoring. ACPI: PCI interrupt for device 0000:00:1f.1 disabled ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled ACPI: PCI interrupt for device 0000:00:1b.0 disabled ACPI: PCI interrupt for device 0000:00:1a.7 disabled ACPI: PCI interrupt for device 0000:00:1a.1 disabled ACPI: PCI interrupt for device 0000:00:1a.0 disabled ACPI: PCI interrupt for device 0000:00:19.0 disabled ACPI handle has no context! ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. kvm: disabling virtualization on CPU1 CPU 1 is now offline SMP alternatives: switching to UP code CPU0 attaching sched-domain: domain 0: span 0 groups: 0 CPU1 is down Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Back to C! Enabling non-boot CPUs ... CPU0 attaching NULL sched-domain. SMP alternatives: switching to SMP code CPU 1 irqstacks, hard=c0778000 soft=c0758000 Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3591.25 BogoMIPS (lpj=1795625) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d kvm: enabling virtualization on CPU1 CPU0 attaching sched-domain: domain 0: span 0-1 groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 groups: 1 0 CPU1 is up Switched to high resolution mode on CPU 1 ACPI: EC: non-query interrupt received, switching to interrupt mode PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003) PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007) PM: Writing back config space on device 0000:00:03.0 at offset f (was 100, writing 10a) PM: Writing back config space on device 0000:00:03.2 at offset f (was 300, writing 30b) PM: Writing back config space on device 0000:00:03.3 at offset f (was 200, writing 20b) ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:19.0 to 64 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.0 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1a.7 to 64 PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1b.0 to 64 PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.0 to 64 PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.1 to 64 PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.2 to 64 PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.3 to 64 PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb5: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb6: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb7: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005) ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata5: port disabled. ignoring. PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407) PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata4.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata4.00: configured for UDMA/33 PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing f8301000) PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000) PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006) PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing f8301800) PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000) PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006) ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18 serial 00:0a: activated parport_pc 00:0b: activated ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: configured for UDMA/100 ata1.00: configured for UDMA/100 ata1: EH complete sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None eth0: 10/100 speed: disabling TSO sd 0:0:0:0: [sda] Starting disk ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 PM: Finishing wakeup. Restarting tasks ... done. usb 3-2: USB disconnect, address 5 usb 3-2: new full speed USB device using uhci_hcd and address 6 usb 3-2: configuration #1 chosen from 1 choice PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.03 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Entering mem sleep Suspending console(s) drm_sysfs_suspend ACPI: PCI interrupt for device 0000:00:02.0 disabled sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:0b: disabled serial 00:0a: disabled ACPI handle has no context! ACPI: PCI interrupt for device 0000:15:00.2 disabled ACPI handle has no context! ACPI handle has no context! ata5: port disabled. ignoring. ACPI: PCI interrupt for device 0000:00:1f.1 disabled ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled ACPI: PCI interrupt for device 0000:00:1b.0 disabled ACPI: PCI interrupt for device 0000:00:1a.7 disabled ACPI: PCI interrupt for device 0000:00:1a.1 disabled ACPI: PCI interrupt for device 0000:00:1a.0 disabled ACPI: PCI interrupt for device 0000:00:19.0 disabled ACPI handle has no context! ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. kvm: disabling virtualization on CPU1 CPU 1 is now offline SMP alternatives: switching to UP code CPU0 attaching sched-domain: domain 0: span 0 groups: 0 CPU1 is down Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Back to C! Enabling non-boot CPUs ... CPU0 attaching NULL sched-domain. SMP alternatives: switching to SMP code CPU 1 irqstacks, hard=c0778000 soft=c0758000 Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3591.05 BogoMIPS (lpj=1795525) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d kvm: enabling virtualization on CPU1 CPU0 attaching sched-domain: domain 0: span 0-1 groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 groups: 1 0 CPU1 is up Switched to high resolution mode on CPU 1 ACPI: EC: non-query interrupt received, switching to interrupt mode PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003) PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007) PM: Writing back config space on device 0000:00:03.0 at offset f (was 100, writing 10a) PM: Writing back config space on device 0000:00:03.2 at offset f (was 300, writing 30b) PM: Writing back config space on device 0000:00:03.3 at offset f (was 200, writing 20b) ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:19.0 to 64 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.0 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1a.7 to 64 PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1b.0 to 64 PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.0 to 64 PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.1 to 64 PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.2 to 64 PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.3 to 64 PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb5: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb6: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb7: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005) ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata5: port disabled. ignoring. PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407) PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata4.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata4.00: configured for UDMA/33 PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing f8301000) PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000) PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006) PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing f8301800) PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000) PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006) ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18 serial 00:0a: activated parport_pc 00:0b: activated ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: configured for UDMA/100 ata1.00: configured for UDMA/100 ata1: EH complete sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None eth0: 10/100 speed: disabling TSO sd 0:0:0:0: [sda] Starting disk ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 PM: Finishing wakeup. Restarting tasks ... done. usb 3-2: USB disconnect, address 6 usb 3-2: new full speed USB device using uhci_hcd and address 7 usb 3-2: configuration #1 chosen from 1 choice PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Entering mem sleep Suspending console(s) drm_sysfs_suspend ACPI: PCI interrupt for device 0000:00:02.0 disabled sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:0b: disabled serial 00:0a: disabled ACPI handle has no context! ACPI: PCI interrupt for device 0000:15:00.2 disabled ACPI handle has no context! ACPI handle has no context! ata5: port disabled. ignoring. ACPI: PCI interrupt for device 0000:00:1f.1 disabled ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled ACPI: PCI interrupt for device 0000:00:1b.0 disabled ACPI: PCI interrupt for device 0000:00:1a.7 disabled ACPI: PCI interrupt for device 0000:00:1a.1 disabled ACPI: PCI interrupt for device 0000:00:1a.0 disabled ACPI: PCI interrupt for device 0000:00:19.0 disabled ACPI handle has no context! ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. kvm: disabling virtualization on CPU1 CPU 1 is now offline SMP alternatives: switching to UP code CPU0 attaching sched-domain: domain 0: span 0 groups: 0 CPU1 is down Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Back to C! Enabling non-boot CPUs ... CPU0 attaching NULL sched-domain. SMP alternatives: switching to SMP code CPU 1 irqstacks, hard=c0778000 soft=c0758000 Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3591.03 BogoMIPS (lpj=1795517) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d kvm: enabling virtualization on CPU1 CPU0 attaching sched-domain: domain 0: span 0-1 groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 groups: 1 0 CPU1 is up Switched to high resolution mode on CPU 1 ACPI: EC: non-query interrupt received, switching to interrupt mode PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003) PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007) PM: Writing back config space on device 0000:00:03.0 at offset f (was 100, writing 10a) PM: Writing back config space on device 0000:00:03.2 at offset f (was 300, writing 30b) PM: Writing back config space on device 0000:00:03.3 at offset f (was 200, writing 20b) ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:19.0 to 64 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.0 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1a.7 to 64 PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1b.0 to 64 PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.0 to 64 PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.1 to 64 PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.2 to 64 PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.3 to 64 PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb5: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb6: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb7: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005) ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata5: port disabled. ignoring. PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407) PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata4.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata4.00: configured for UDMA/33 PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing f8301000) PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000) PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006) PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing f8301800) PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000) PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006) ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18 serial 00:0a: activated parport_pc 00:0b: activated ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: configured for UDMA/100 ata1.00: configured for UDMA/100 ata1: EH complete sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None eth0: 10/100 speed: disabling TSO sd 0:0:0:0: [sda] Starting disk ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 PM: Finishing wakeup. Restarting tasks ... done. usb 3-2: USB disconnect, address 7 usb 3-2: new full speed USB device using uhci_hcd and address 8 usb 3-2: configuration #1 chosen from 1 choice PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.04 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Entering mem sleep Suspending console(s) drm_sysfs_suspend ACPI: PCI interrupt for device 0000:00:02.0 disabled sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:0b: disabled serial 00:0a: disabled ACPI handle has no context! ACPI: PCI interrupt for device 0000:15:00.2 disabled ACPI handle has no context! ACPI handle has no context! ata5: port disabled. ignoring. ACPI: PCI interrupt for device 0000:00:1f.1 disabled ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled ACPI: PCI interrupt for device 0000:00:1b.0 disabled ACPI: PCI interrupt for device 0000:00:1a.7 disabled ACPI: PCI interrupt for device 0000:00:1a.1 disabled ACPI: PCI interrupt for device 0000:00:1a.0 disabled ACPI: PCI interrupt for device 0000:00:19.0 disabled ACPI handle has no context! ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. kvm: disabling virtualization on CPU1 CPU 1 is now offline SMP alternatives: switching to UP code CPU0 attaching sched-domain: domain 0: span 0 groups: 0 CPU1 is down Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Back to C! Enabling non-boot CPUs ... CPU0 attaching NULL sched-domain. SMP alternatives: switching to SMP code CPU 1 irqstacks, hard=c0778000 soft=c0758000 Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3591.05 BogoMIPS (lpj=1795525) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d kvm: enabling virtualization on CPU1 CPU0 attaching sched-domain: domain 0: span 0-1 groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 groups: 1 0 CPU1 is up Switched to high resolution mode on CPU 1 ACPI: EC: non-query interrupt received, switching to interrupt mode PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003) PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007) PM: Writing back config space on device 0000:00:03.0 at offset f (was 100, writing 10a) PM: Writing back config space on device 0000:00:03.2 at offset f (was 300, writing 30b) PM: Writing back config space on device 0000:00:03.3 at offset f (was 200, writing 20b) ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:19.0 to 64 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.0 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1a.7 to 64 PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1b.0 to 64 PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.0 to 64 PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.1 to 64 PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.2 to 64 PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.3 to 64 PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb5: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb6: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb7: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005) ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata5: port disabled. ignoring. PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407) PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata4.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata4.00: configured for UDMA/33 PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing f8301000) PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000) PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006) PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing f8301800) PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000) PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006) ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18 serial 00:0a: activated parport_pc 00:0b: activated ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: configured for UDMA/100 ata1.00: configured for UDMA/100 ata1: EH complete sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None eth0: 10/100 speed: disabling TSO sd 0:0:0:0: [sda] Starting disk ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 PM: Finishing wakeup. Restarting tasks ... done. usb 3-2: USB disconnect, address 8 usb 3-2: new full speed USB device using uhci_hcd and address 9 usb 3-2: configuration #1 chosen from 1 choice PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Entering mem sleep Suspending console(s) drm_sysfs_suspend ACPI: PCI interrupt for device 0000:00:02.0 disabled sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:0b: disabled serial 00:0a: disabled ACPI handle has no context! ACPI: PCI interrupt for device 0000:15:00.2 disabled ACPI handle has no context! ACPI handle has no context! ata5: port disabled. ignoring. ACPI: PCI interrupt for device 0000:00:1f.1 disabled ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled ACPI: PCI interrupt for device 0000:00:1b.0 disabled ACPI: PCI interrupt for device 0000:00:1a.7 disabled ACPI: PCI interrupt for device 0000:00:1a.1 disabled ACPI: PCI interrupt for device 0000:00:1a.0 disabled ACPI: PCI interrupt for device 0000:00:19.0 disabled ACPI handle has no context! ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. kvm: disabling virtualization on CPU1 CPU 1 is now offline SMP alternatives: switching to UP code CPU0 attaching sched-domain: domain 0: span 0 groups: 0 CPU1 is down Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Back to C! Enabling non-boot CPUs ... CPU0 attaching NULL sched-domain. SMP alternatives: switching to SMP code CPU 1 irqstacks, hard=c0778000 soft=c0758000 Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3591.02 BogoMIPS (lpj=1795514) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d kvm: enabling virtualization on CPU1 CPU0 attaching sched-domain: domain 0: span 0-1 groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 groups: 1 0 CPU1 is up Switched to high resolution mode on CPU 1 ACPI: EC: non-query interrupt received, switching to interrupt mode PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003) PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007) PM: Writing back config space on device 0000:00:03.0 at offset f (was 100, writing 10a) PM: Writing back config space on device 0000:00:03.2 at offset f (was 300, writing 30b) PM: Writing back config space on device 0000:00:03.3 at offset f (was 200, writing 20b) ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:19.0 to 64 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.0 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1a.7 to 64 PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1b.0 to 64 PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.0 to 64 PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.1 to 64 PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.2 to 64 PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.3 to 64 PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb5: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb6: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb7: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005) ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata5: port disabled. ignoring. PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407) PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata4.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata4.00: configured for UDMA/33 PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing f8301000) PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000) PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006) PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing f8301800) PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000) PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006) ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18 serial 00:0a: activated parport_pc 00:0b: activated ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: configured for UDMA/100 ata1.00: configured for UDMA/100 ata1: EH complete sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None eth0: 10/100 speed: disabling TSO sd 0:0:0:0: [sda] Starting disk ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 PM: Finishing wakeup. Restarting tasks ... done. usb 3-2: USB disconnect, address 9 usb 3-2: new full speed USB device using uhci_hcd and address 10 usb 3-2: configuration #1 chosen from 1 choice PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.04 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Entering mem sleep Suspending console(s) drm_sysfs_suspend ACPI: PCI interrupt for device 0000:00:02.0 disabled sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:0b: disabled serial 00:0a: disabled ACPI handle has no context! ACPI: PCI interrupt for device 0000:15:00.2 disabled ACPI handle has no context! ACPI handle has no context! ata5: port disabled. ignoring. ACPI: PCI interrupt for device 0000:00:1f.1 disabled ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled ACPI: PCI interrupt for device 0000:00:1b.0 disabled ACPI: PCI interrupt for device 0000:00:1a.7 disabled ACPI: PCI interrupt for device 0000:00:1a.1 disabled ACPI: PCI interrupt for device 0000:00:1a.0 disabled ACPI: PCI interrupt for device 0000:00:19.0 disabled ACPI handle has no context! ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. kvm: disabling virtualization on CPU1 CPU 1 is now offline SMP alternatives: switching to UP code CPU0 attaching sched-domain: domain 0: span 0 groups: 0 CPU1 is down Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Back to C! Enabling non-boot CPUs ... CPU0 attaching NULL sched-domain. SMP alternatives: switching to SMP code CPU 1 irqstacks, hard=c0778000 soft=c0758000 Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3591.04 BogoMIPS (lpj=1795522) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d kvm: enabling virtualization on CPU1 CPU0 attaching sched-domain: domain 0: span 0-1 groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 groups: 1 0 CPU1 is up Switched to high resolution mode on CPU 1 ACPI: EC: non-query interrupt received, switching to interrupt mode PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003) PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007) PM: Writing back config space on device 0000:00:03.0 at offset f (was 100, writing 10a) PM: Writing back config space on device 0000:00:03.2 at offset f (was 300, writing 30b) PM: Writing back config space on device 0000:00:03.3 at offset f (was 200, writing 20b) ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:19.0 to 64 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.0 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1a.7 to 64 PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1b.0 to 64 PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.0 to 64 PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.1 to 64 PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.2 to 64 PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.3 to 64 PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb5: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb6: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb7: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005) ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata5: port disabled. ignoring. PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407) PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata4.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata4.00: configured for UDMA/33 PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing f8301000) PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000) PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006) PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing f8301800) PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000) PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006) ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18 serial 00:0a: activated parport_pc 00:0b: activated ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: configured for UDMA/100 ata1.00: configured for UDMA/100 ata1: EH complete sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None eth0: 10/100 speed: disabling TSO sd 0:0:0:0: [sda] Starting disk ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 PM: Finishing wakeup. Restarting tasks ... done. usb 3-2: USB disconnect, address 10 usb 3-2: new full speed USB device using uhci_hcd and address 11 usb 3-2: configuration #1 chosen from 1 choice [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1 [drm:i915_vblank_swap] *ERROR* Invalid pipe 1