[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008 (Ubuntu 2.6.24-19.34-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable) [ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6e3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 1142MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f7750 [ 0.000000] Entering add_active_range(0, 0, 521936) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 521936 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 521936 [ 0.000000] On node 0 totalpages: 521936 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2285 pages used for memmap [ 0.000000] HighMem zone: 290275 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F76A0 checksum 0 [ 0.000000] ACPI: RSDP 000F76A0, 0024 (r2 TOSQCI) [ 0.000000] ACPI: XSDT 7F6D2C2A, 0074 (r1 TOSQCI TOSQCI00 6040000 LTP 0) [ 0.000000] ACPI: FACP 7F6DFC92, 00F4 (r3 TOSQCI TOSQCI00 6040000 ALAN 1) [ 0.000000] ACPI: DSDT 7F6D4136, BAE8 (r2 TOSQCI N.Jersey 6040000 MSFT 3000001) [ 0.000000] ACPI: FACS 7F6E2FC0, 0040 [ 0.000000] ACPI: HPET 7F6DFD86, 0038 (r1 TOSQCI TOSQCI00 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 7F6DFDBE, 003C (r1 TOSQCI TOSQCI00 6040000 LOHR 5A) [ 0.000000] ACPI: APIC 7F6DFDFA, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 7F6DFE62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SLIC 7F6DFE8A, 0176 (r1 TOSQCI TOSQCI00 6040000 LTP 0) [ 0.000000] ACPI: SSDT 7F6D3E89, 02AD (r1 SataRe SataAhci 1000 INTL 20061109) [ 0.000000] ACPI: SSDT 7F6D322A, 025F (r1 PmRef Cpu0Tst 3000 INTL 20061109) [ 0.000000] ACPI: SSDT 7F6D3184, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20061109) [ 0.000000] ACPI: SSDT 7F6D2C9E, 04E6 (r1 PmRef CpuPm 3000 INTL 20061109) [ 0.000000] ACPI: DMI detected: Toshiba [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 7:7 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 7:7 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517859 [ 0.000000] Kernel command line: root=UUID=0f27589e-f3ff-489f-80ef-979119edc049 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2393.996 MHz processor. [ 13.420360] Console: colour VGA+ 80x25 [ 13.420363] console [tty0] enabled [ 13.420734] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 13.421020] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 13.480110] Memory: 2057892k/2087744k available (2177k kernel code, 28636k reserved, 1006k data, 368k init, 1170240k highmem) [ 13.480115] virtual kernel memory layout: [ 13.480116] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 13.480117] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 13.480117] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 13.480118] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 13.480119] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 13.480119] .data : 0xc0320434 - 0xc041bdc4 (1006 kB) [ 13.480120] .text : 0xc0100000 - 0xc0320434 (2177 kB) [ 13.480122] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 13.480162] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 13.480277] hpet clockevent registered [ 13.560145] Calibrating delay using timer specific routine.. 4792.68 BogoMIPS (lpj=9585366) [ 13.560163] Security Framework initialized [ 13.560169] SELinux: Disabled at boot. [ 13.560180] AppArmor: AppArmor initialized [ 13.560183] Failure registering capabilities with primary security module. [ 13.560189] Mount-cache hash table entries: 512 [ 13.560292] Initializing cgroup subsys ns [ 13.560297] Initializing cgroup subsys cpuacct [ 13.560305] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e3bd 00000000 00000001 00000001 [ 13.560310] monitor/mwait feature present. [ 13.560311] using mwait in idle threads. [ 13.560314] CPU: L1 I cache: 32K, L1 D cache: 32K [ 13.560316] CPU: L2 cache: 3072K [ 13.560318] CPU: Physical Processor ID: 0 [ 13.560319] CPU: Processor Core ID: 0 [ 13.560320] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0008e3bd 00000000 00000001 00000001 [ 13.560327] Compat vDSO mapped to ffffe000. [ 13.560337] Checking 'hlt' instruction... OK. [ 13.576428] SMP alternatives: switching to UP code [ 13.577692] Early unpacking initramfs... done [ 13.803676] ACPI: Core revision 20070126 [ 13.803736] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 13.872415] CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [ 13.872428] SMP alternatives: switching to SMP code [ 13.873012] Booting processor 1/1 eip 3000 [ 13.883302] Initializing CPU#1 [ 13.963442] Calibrating delay using timer specific routine.. 4678.28 BogoMIPS (lpj=9356570) [ 13.963447] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e3bd 00000000 00000001 00000001 [ 13.963451] monitor/mwait feature present. [ 13.963453] CPU: L1 I cache: 32K, L1 D cache: 32K [ 13.963454] CPU: L2 cache: 3072K [ 13.963456] CPU: Physical Processor ID: 0 [ 13.963457] CPU: Processor Core ID: 1 [ 13.963458] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0008e3bd 00000000 00000001 00000001 [ 13.964114] CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [ 13.964132] Total of 2 processors activated (9470.96 BogoMIPS). [ 13.964303] ENABLING IO-APIC IRQs [ 13.964481] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 14.111274] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 14.131252] Brought up 2 CPUs [ 14.131272] CPU0 attaching sched-domain: [ 14.131274] domain 0: span 03 [ 14.131275] groups: 01 02 [ 14.131277] CPU1 attaching sched-domain: [ 14.131278] domain 0: span 03 [ 14.131279] groups: 02 01 [ 14.131436] net_namespace: 64 bytes [ 14.131442] Booting paravirtualized kernel on bare hardware [ 14.131768] Time: 22:50:37 Date: 07/13/08 [ 14.131789] NET: Registered protocol family 16 [ 14.131917] EISA bus registered [ 14.131921] ACPI: bus type pci registered [ 14.132288] PCI: PCI BIOS revision 3.00 entry at 0xfdbf1, last bus=10 [ 14.132289] PCI: Using configuration type 1 [ 14.132296] Setting up standard PCI resources [ 14.135119] ACPI: EC: Look up EC in DSDT [ 14.137596] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 14.137830] ACPI: Interpreter enabled [ 14.137832] ACPI: (supports S0 S3 S4 S5) [ 14.137841] ACPI: Using IOAPIC for interrupt routing [ 14.216259] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 14.216261] ACPI: EC: driver started in poll mode [ 14.216289] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 14.217203] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 14.217207] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 14.218273] PCI: Transparent bridge - 0000:00:1e.0 [ 14.218319] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 14.218540] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 14.218638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 14.218730] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 14.218824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 14.218928] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 14.229885] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 14.229968] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 14.230049] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 14.230129] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 14.230210] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 14.230291] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 14.230371] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 14.230452] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 14.230553] Linux Plug and Play Support v0.97 (c) Adam Belay [ 14.230573] pnp: PnP ACPI init [ 14.230578] ACPI: bus type pnp registered [ 14.232494] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 14.232721] pnp: PnP ACPI: found 9 devices [ 14.232723] ACPI: ACPI bus type pnp unregistered [ 14.232725] PnPBIOS: Disabled by ACPI PNP [ 14.232895] PCI: Using ACPI for IRQ routing [ 14.232897] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 14.232899] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 [ 14.232900] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 [ 14.232902] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0 [ 14.232903] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.3 [ 14.232905] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.3 [ 14.232906] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.3 [ 14.232907] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.4 [ 14.232909] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.4 [ 14.232910] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.4 [ 14.232912] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.5 [ 14.232913] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.5 [ 14.232914] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.5 [ 14.232949] PCI: Cannot allocate resource region 0 of device 0000:07:00.0 [ 14.232951] PCI: Cannot allocate resource region 2 of device 0000:07:00.0 [ 14.232955] PCI: Cannot allocate resource region 0 of device 0000:08:00.0 [ 14.334915] NET: Registered protocol family 8 [ 14.334917] NET: Registered protocol family 20 [ 14.334941] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 14.334943] hpet0: 3 64-bit timers, 14318180 Hz [ 14.335969] AppArmor: AppArmor Filesystem Enabled [ 14.338796] Time: tsc clocksource has been installed. [ 14.338806] Switched to high resolution mode on CPU 0 [ 14.338886] Switched to high resolution mode on CPU 1 [ 14.362747] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 14.362749] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 14.362751] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 14.362753] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 14.362755] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 14.362756] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 14.362758] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 14.362760] system 00:01: iomem range 0xff80000-0xff8ffff could not be reserved [ 14.362765] system 00:03: iomem range 0xfed00000-0xfed003ff could not be reserved [ 14.362769] system 00:05: ioport range 0x800-0x80f has been reserved [ 14.362771] system 00:05: ioport range 0x1000-0x107f has been reserved [ 14.362773] system 00:05: ioport range 0x1180-0x11bf has been reserved [ 14.362775] system 00:05: ioport range 0xfe00-0xfe00 has been reserved [ 14.393038] PCI: Bridge: 0000:00:1c.0 [ 14.393040] IO window: disabled. [ 14.393044] MEM window: disabled. [ 14.393048] PREFETCH window: disabled. [ 14.393053] PCI: Bridge: 0000:00:1c.3 [ 14.393054] IO window: disabled. [ 14.393059] MEM window: disabled. [ 14.393062] PREFETCH window: disabled. [ 14.393080] PCI: Bridge: 0000:00:1c.4 [ 14.393083] IO window: 2000-2fff [ 14.393088] MEM window: 88000000-880fffff [ 14.393092] PREFETCH window: 88100000-881fffff [ 14.393108] PCI: Bridge: 0000:00:1c.5 [ 14.393109] IO window: disabled. [ 14.393114] MEM window: 88200000-882fffff [ 14.393118] PREFETCH window: disabled. [ 14.393123] PCI: Bridge: 0000:00:1e.0 [ 14.393124] IO window: disabled. [ 14.393129] MEM window: f0400000-f04fffff [ 14.393133] PREFETCH window: disabled. [ 14.393160] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 14.393167] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 14.393189] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17 [ 14.393195] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 14.393216] PCI: Enabling device 0000:00:1c.4 (0000 -> 0003) [ 14.393219] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 16 [ 14.393225] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 14.393246] PCI: Enabling device 0000:00:1c.5 (0000 -> 0002) [ 14.393250] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 18 [ 14.393256] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 14.393268] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 14.393276] NET: Registered protocol family 2 [ 14.430646] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 14.430799] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 14.431132] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 14.431301] TCP: Hash tables configured (established 131072 bind 65536) [ 14.431303] TCP reno registered [ 14.442673] checking if image is initramfs... it is [ 14.922445] Freeing initrd memory: 7319k freed [ 14.922590] Simple Boot Flag at 0x36 set to 0x1 [ 14.923038] audit: initializing netlink socket (disabled) [ 14.923050] audit(1215989437.113:1): initialized [ 14.923211] highmem bounce pool size: 64 pages [ 14.924528] VFS: Disk quotas dquot_6.5.1 [ 14.924578] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 14.924676] io scheduler noop registered [ 14.924677] io scheduler anticipatory registered [ 14.924678] io scheduler deadline registered [ 14.924686] io scheduler cfq registered (default) [ 14.924695] Boot video device is 0000:00:02.0 [ 14.924892] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 14.924948] assign_interrupt_mode Found MSI capability [ 14.924994] Allocate Port Service[0000:00:1c.0:pcie00] [ 14.925016] Allocate Port Service[0000:00:1c.0:pcie02] [ 14.925102] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 14.925157] assign_interrupt_mode Found MSI capability [ 14.925200] Allocate Port Service[0000:00:1c.3:pcie00] [ 14.925221] Allocate Port Service[0000:00:1c.3:pcie02] [ 14.925306] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 14.925361] assign_interrupt_mode Found MSI capability [ 14.925404] Allocate Port Service[0000:00:1c.4:pcie00] [ 14.925425] Allocate Port Service[0000:00:1c.4:pcie02] [ 14.925513] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 14.925567] assign_interrupt_mode Found MSI capability [ 14.925610] Allocate Port Service[0000:00:1c.5:pcie00] [ 14.925633] Allocate Port Service[0000:00:1c.5:pcie02] [ 14.925753] ACPI: EC: missing address confirmation, don't expect it any longer. [ 14.925831] isapnp: Scanning for PnP cards... [ 15.279660] isapnp: No Plug & Play device found [ 15.296724] Real Time Clock Driver v1.12ac [ 15.296893] hpet_resources: 0xfed00000 is busy [ 15.296913] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 15.297703] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 15.297748] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 15.297810] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 15.300139] i8042.c: Detected active multiplexing controller, rev 1.1. [ 15.302224] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 15.302228] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 15.302229] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 15.302231] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 15.302233] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 15.317199] mice: PS/2 mouse device common for all mice [ 15.317272] EISA: Probing bus 0 at eisa.0 [ 15.317277] Cannot allocate resource for EISA slot 1 [ 15.317279] Cannot allocate resource for EISA slot 2 [ 15.317302] EISA: Detected 0 cards. [ 15.317305] cpuidle: using governor ladder [ 15.317306] cpuidle: using governor menu [ 15.317366] NET: Registered protocol family 1 [ 15.317386] Using IPI No-Shortcut mode [ 15.317409] registered taskstats version 1 [ 15.317497] Magic number: 0:106:856 [ 15.317521] hash matches device ptyv8 [ 15.317525] hash matches device ptysb [ 15.317547] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 15.317548] EDD information not available. [ 15.317727] Freeing unused kernel memory: 368k freed [ 15.345109] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 16.474522] fuse init (API version 7.9) [ 16.487903] ACPI: SSDT 7F6D3B05, 02BC (r1 PmRef Cpu0Ist 3000 INTL 20061109) [ 16.488076] ACPI: SSDT 7F6D3489, 05F7 (r1 PmRef Cpu0Cst 3001 INTL 20061109) [ 16.489474] Monitor-Mwait will be used to enter C-1 state [ 16.489476] Monitor-Mwait will be used to enter C-2 state [ 16.489478] Monitor-Mwait will be used to enter C-3 state [ 16.489559] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 16.489563] ACPI: Processor [CPU0] (supports 8 throttling states) [ 16.489718] ACPI: SSDT 7F6D3DC1, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20061109) [ 16.489877] ACPI: SSDT 7F6D3A80, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20061109) [ 16.490652] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 16.490656] ACPI: Processor [CPU1] (supports 8 throttling states) [ 16.493367] ACPI: Thermal Zone [THRM] (58 C) [ 16.581350] usbcore: registered new interface driver usbfs [ 16.581371] usbcore: registered new interface driver hub [ 16.581660] usbcore: registered new device driver usb [ 16.586929] USB Universal Host Controller Interface driver v3.0 [ 16.586974] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 18 [ 16.586982] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 16.586986] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 16.587185] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 16.587214] uhci_hcd 0000:00:1a.0: irq 18, io base 0x00001820 [ 16.587303] usb usb1: configuration #1 chosen from 1 choice [ 16.587319] hub 1-0:1.0: USB hub found [ 16.587322] hub 1-0:1.0: 2 ports detected [ 16.690694] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 19 [ 16.690705] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 16.690708] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 16.690725] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 16.690756] uhci_hcd 0000:00:1a.1: irq 19, io base 0x00001840 [ 16.690836] usb usb2: configuration #1 chosen from 1 choice [ 16.690853] hub 2-0:1.0: USB hub found [ 16.690856] hub 2-0:1.0: 2 ports detected [ 16.794501] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 16.794512] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 16.794515] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 16.794532] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 16.794562] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001860 [ 16.794645] usb usb3: configuration #1 chosen from 1 choice [ 16.794661] hub 3-0:1.0: USB hub found [ 16.794664] hub 3-0:1.0: 2 ports detected [ 16.804974] SCSI subsystem initialized [ 16.859569] libata version 3.00 loaded. [ 16.898333] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17 [ 16.898344] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 16.898348] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 16.898364] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 16.898395] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880 [ 16.898479] usb usb4: configuration #1 chosen from 1 choice [ 16.898497] hub 4-0:1.0: USB hub found [ 16.898500] hub 4-0:1.0: 2 ports detected [ 17.002156] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21 [ 17.002166] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 17.002170] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 17.002186] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 17.002216] uhci_hcd 0000:00:1d.2: irq 21, io base 0x000018a0 [ 17.002298] usb usb5: configuration #1 chosen from 1 choice [ 17.002315] hub 5-0:1.0: USB hub found [ 17.002318] hub 5-0:1.0: 2 ports detected [ 17.106138] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 21 [ 17.106152] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 17.106155] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 17.106172] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 17.110063] ehci_hcd 0000:00:1a.7: debug port 1 [ 17.110069] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 17.110073] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xf0704800 [ 17.125861] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 17.125938] usb usb6: configuration #1 chosen from 1 choice [ 17.125955] hub 6-0:1.0: USB hub found [ 17.125959] hub 6-0:1.0: 4 ports detected [ 17.229792] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 [ 17.229809] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 17.229814] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 17.229849] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 17.233768] ehci_hcd 0000:00:1d.7: debug port 1 [ 17.233774] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 17.233778] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf0704c00 [ 17.249647] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 17.249802] usb usb7: configuration #1 chosen from 1 choice [ 17.249831] hub 7-0:1.0: USB hub found [ 17.249834] hub 7-0:1.0: 6 ports detected [ 17.305542] Clocksource tsc unstable (delta = -2595656050 ns) [ 17.309626] Time: hpet clocksource has been installed. [ 17.349749] ACPI: PCI Interrupt 0000:0a:01.0[A] -> GSI 16 (level, low) -> IRQ 18 [ 17.399212] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f0400000-f04007ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 17.401205] ahci 0000:00:1f.2: version 3.0 [ 17.401226] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17 [ 17.836779] usb 7-4: new high speed USB device using ehci_hcd and address 3 [ 17.982223] usb 7-4: configuration #1 chosen from 1 choice [ 18.224082] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 18.313049] Monitor-Mwait will be used to enter C-3 state [ 18.387421] usb 3-2: configuration #1 chosen from 1 choice [ 18.399793] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 18.399796] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 18.399801] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 18.399995] scsi0 : ahci [ 18.400087] scsi1 : ahci [ 18.400169] scsi2 : ahci [ 18.400225] ata1: SATA max UDMA/133 abar m2048@0xf0704000 port 0xf0704100 irq 219 [ 18.400228] ata2: SATA max UDMA/133 abar m2048@0xf0704000 port 0xf0704180 irq 219 [ 18.400231] ata3: SATA max UDMA/133 abar m2048@0xf0704000 port 0xf0704200 irq 219 [ 18.667391] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b240000ea72fa] [ 18.874933] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 18.933174] ata1.00: ATA-8: TOSHIBA MK3252GSX, LV010M, max UDMA/100 [ 18.933176] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 18.934025] ata1.00: configured for UDMA/100 [ 19.242277] ata2: SATA link down (SStatus 0 SControl 300) [ 19.337416] ata3: SATA link down (SStatus 0 SControl 300) [ 19.337627] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5 [ 19.337842] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 17 [ 19.337872] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 19.337883] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 19.340078] ata_piix 0000:00:1f.1: version 2.12 [ 19.340087] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 17 [ 19.340117] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 19.340169] scsi3 : ata_piix [ 19.340201] scsi4 : ata_piix [ 19.340615] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 19.340617] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 19.343010] Driver 'sd' needs updating - please use bus_type methods [ 19.345760] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 19.345805] sd 0:0:0:0: [sda] Write Protect is off [ 19.345810] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 19.345880] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 19.345955] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 19.345984] sd 0:0:0:0: [sda] Write Protect is off [ 19.345986] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 19.346052] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 19.346054] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 19.458742] sd 0:0:0:0: [sda] Attached SCSI disk [ 19.461466] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 19.649452] ata4.00: ATAPI: MATSHITADVD-RAM UJ-852S, 1.80, max UDMA/33 [ 19.708127] Attempting manual resume [ 19.708129] swsusp: Resume From Partition 8:5 [ 19.708130] PM: Checking swsusp image. [ 19.708282] PM: Resume from disk failed. [ 19.718115] EXT3-fs: INFO: recovery required on readonly filesystem. [ 19.718117] EXT3-fs: write access will be enabled during recovery. [ 19.820936] ata4.00: configured for UDMA/33 [ 19.821032] ata5: port disabled. ignoring. [ 19.823193] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-852S 1.80 PQ: 0 ANSI: 5 [ 19.823261] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 19.830332] Driver 'sr' needs updating - please use bus_type methods [ 19.836621] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 19.836625] Uniform CD-ROM driver Revision: 3.20 [ 19.836688] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 20.168483] kjournald starting. Commit interval 5 seconds [ 20.168500] EXT3-fs: sda2: orphan cleanup on readonly fs [ 20.168508] ext3_orphan_cleanup: deleting unreferenced inode 933901 [ 20.168532] EXT3-fs: sda2: 1 orphan inode deleted [ 20.168534] EXT3-fs: recovery complete. [ 20.185864] EXT3-fs: mounted filesystem with ordered data mode. [ 26.350537] Linux agpgart interface v0.102 [ 26.399703] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 26.423683] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 26.463637] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 26.483555] iTCO_vendor_support: vendor-support=0 [ 26.525557] agpgart: Detected an Intel 965GM Chipset. [ 26.526980] agpgart: Detected 7676K stolen memory. [ 26.553516] agpgart: AGP aperture is 256M @ 0xd0000000 [ 26.627300] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 26.627361] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 26.627393] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 26.641979] ACPI: AC Adapter [ACAD] (on-line) [ 26.651364] input: Power Button (FF) as /devices/virtual/input/input3 [ 26.711106] ACPI: Power Button (FF) [PWRF] [ 26.711156] input: Lid Switch as /devices/virtual/input/input4 [ 26.743145] ACPI: Lid Switch [LID] [ 26.743190] input: Power Button (CM) as /devices/virtual/input/input5 [ 26.806952] ACPI: Power Button (CM) [PWRB] [ 26.813005] sdhci: Secure Digital Host Controller Interface driver [ 26.813008] sdhci: Copyright(c) Pierre Ossman [ 26.813044] sdhci: SDHCI controller found at 0000:0a:01.2 [1217:7120] (rev 2) [ 26.813065] ACPI: PCI Interrupt 0000:0a:01.2[A] -> GSI 16 (level, low) -> IRQ 18 [ 26.813080] sdhci:slot0: Unknown controller version (2). You may experience problems. [ 26.813119] mmc0: SDHCI at 0xf0402800 irq 18 DMA [ 27.230269] ACPI: Battery Slot [BAT1] (battery present) [ 27.230364] ACPI: WMI-Acer: Mapper loaded [ 27.238271] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 27.298078] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 27.345075] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 18 [ 27.345087] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 27.345118] sky2 0000:07:00.0: v1.20 addr 0x88000000 irq 18 Yukon-Extreme (0xb5) rev 2 [ 27.345450] sky2 eth0: addr 00:1e:68:5d:bb:d1 [ 27.529644] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 27.529667] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 27.610870] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.25 [ 27.610873] iwl4965: Copyright(c) 2003-2007 Intel Corporation [ 27.613865] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1e0b1, caps: 0xd04711/0xa00000 [ 27.613870] synaptics: Toshiba Satellite U400 detected, limiting rate to 40pps. [ 27.625255] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 27.625265] PCI: Setting latency timer of device 0000:08:00.0 to 64 [ 27.625280] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [ 27.682451] wmaster0: Selected rate control algorithm 'iwl-4965-rs' [ 27.695496] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 27.721998] Linux video capture interface: v2.00 [ 27.760849] ACPI: PCI interrupt for device 0000:08:00.0 disabled [ 27.777637] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008) [ 27.779595] usbcore: registered new interface driver uvcvideo [ 27.779598] USB Video Class driver (v0.1.0) [ 28.293530] lp: driver loaded but no devices found [ 28.373125] omnibook: Driver version 2.20070211-trunk. [ 28.373128] omnibook: Forced load with EC type 14. [ 28.378487] omnibook: Enabled features: bluetooth dmi version lcd. [ 28.439148] Adding 6345632k swap on /dev/sda5. Priority:-1 extents:1 across:6345632k [ 28.862368] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 28.870981] EXT3 FS on sda2, internal journal [ 28.976801] usb 4-1: configuration #1 chosen from 1 choice [ 29.054361] Bluetooth: Core ver 2.11 [ 29.054600] NET: Registered protocol family 31 [ 29.054602] Bluetooth: HCI device and connection manager initialized [ 29.054604] Bluetooth: HCI socket layer initialized [ 29.070025] Bluetooth: HCI USB driver ver 2.9 [ 29.071623] usbcore: registered new interface driver hci_usb [ 31.222454] kjournald starting. Commit interval 5 seconds [ 31.223139] EXT3 FS on sda3, internal journal [ 31.223144] EXT3-fs: mounted filesystem with ordered data mode. [ 31.254937] kjournald starting. Commit interval 5 seconds [ 31.255183] EXT3 FS on sda6, internal journal [ 31.255188] EXT3-fs: mounted filesystem with ordered data mode. [ 31.549412] ip_tables: (C) 2000-2006 Netfilter Core Team