Total memory = 512MB; using 1024kB for hash table (at c0400000)
Linux version 2.6.4-1.302.root (root@localhost) (gcc version 3.3.3 20040311 (Red Hat Linux 3.3.3-3)) #1 Thu Apr 1 10:52:05 EST 2004
Found UniNorth memory controller & host bridge, revision: 17
Mapped at 0xfdeb5000
Found a Keylargo mac-io controller, rev: 3, mapped at 0xfde35000
Processor NAP mode on idle enabled.
PowerMac motherboard: PowerBook Titanium III
Found UniNorth PCI host bridge at 0xf0000000. Firmware bus number: 0->1
Found UniNorth PCI host bridge at 0xf2000000. Firmware bus number: 0->1
Found UniNorth PCI host bridge at 0xf4000000. Firmware bus number: 0->1
via-pmu: Server Mode is disabled
PMU driver 2 initialized for Core99, firmware: 0c
nvram: Checking bank 0...
nvram: gen0=654, gen1=653
nvram: Active bank is: 0
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
On node 0 totalpages: 131072
  DMA zone: 131072 pages, LIFO batch:16
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=/dev/hda5 ro 
PowerMac using OpenPIC irq controller at 0x80040000
OpenPIC Version 1.2 (4 CPUs and 64 IRQ sources) at fc5e4000
OpenPIC timer frequency is 4.166666 MHz
PID hash table entries: 4096 (order 12: 32768 bytes)
GMT Delta read from XPRAM: 660 minutes, DST: on
time_init: decrementer frequency = 33.330805 MHz
Console: colour dummy device 80x25
Memory: 513600k available (2016k kernel code, 1092k data, 176k init, 0k highmem)
AGP special page: 0xdffff000
Calibrating delay loop... 665.60 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed.
Failure registering capabilities with the kernel
selinux_register_security:  Registering secondary module capability
Capability LSM initialized
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 700k freed
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: Probing PCI hardware
Can't get bus-range for /pci@f2000000/cardbus@1a
Registering openpic with sysfs...
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
PCI: Enabling device 0000:00:10.0 (0086 -> 0087)
radeonfb: Invalid ROM signature 0 should be 0xaa55
radeonfb: Retreived PLL infos from Open Firmware
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=183.00 Mhz, System=230.00 MHz
radeonfb: Monitor 1 type LCD found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
radeonfb: Power Management enabled for Mobility chipsets
Registered "ati" backlight controller, level: 15/15
radeonfb: ATI Radeon LW  DDR SGRAM 32 MB
Thermal assist unit not available
Registering PowerMac CPU frequency driver
Low: 667 Mhz, High: 667 Mhz, Boot: 667 Mhz, switch method: PMU
audit: initializing netlink socket (disabled)
audit(1081383144.193:0): initialized
VFS: Disk quotas dquot_6.5.1
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
Console: switching to colour frame buffer device 160x53
Macintosh non-volatile memory driver v1.1
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected Apple UniNorth 1.5 chipset
agpgart: Maximum main memory to use for agp memory: 440M
agpgart: configuring for size idx: 4
agpgart: AGP aperture is 16M @ 0x0
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
IN from bad port 3f9 at c00edec4
IN from bad port 3f9 at c00edec4
IN from bad port 3f9 at c00edec4
IN from bad port 2f9 at c00edec4
IN from bad port 2f9 at c00edec4
IN from bad port 2f9 at c00edec4
IN from bad port 3e9 at c00edec4
IN from bad port 3e9 at c00edec4
IN from bad port 3e9 at c00edec4
IN from bad port 2e9 at c00edec4
IN from bad port 2e9 at c00edec4
IN from bad port 2e9 at c00edec4
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
MacIO PCI driver attached to Keylargo chipset
input: Macintosh mouse button emulation
apm_emu: APM Emulation 0.5 initialized.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
adb: starting probe task...
adb devices: [2]: 2 c3 [3]: 3 1 [7]: 7 1f
ADB keyboard at 2, handler 1
Detected ADB keyboard, type ANSI.
input: ADB keyboard on adb2:2.c3/input
input: ADB Powerbook buttons on adb7:7.1f/input
ADB mouse at 3, handler set to 4 (trackpad)
input: ADB mouse on adb3:3.01/input
adb: finished probe task...
ide0: Found Apple KeyLargo ATA-4 controller, bus ID 2, irq 19
Probing IDE interface ide0...
hda: TOSHIBA MK3018GAS, ATA DISK drive
ide_pmac: Set UDMA timing for mode 4, reg: 0x0c50038c
hda: Enabling Ultra DMA 4
Using deadline io scheduler
ide0 at 0xe2145000-0xe2145007,0xe2145160 on irq 19
ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 20
Probing IDE interface ide1...
hdc: MATSHITACD-RW CW-8121, ATAPI CD/DVD-ROM drive
hdc: MDMA, cycleTime: 120, accessTime: 90, recTime: 30
hdc: Set MDMA timing for mode 2, reg: 0x00011d26
hdc: Enabling MultiWord DMA 2
ide1 at 0xe214a000-0xe214a007,0xe214a160 on irq 20
ide2: Found Apple KeyLargo ATA-3 controller, bus ID 1, irq 21
Probing IDE interface ide2...
ide2: Bus empty, interface released.
hda: max request size: 128KiB
hda: 58605120 sectors (30005 MB), CHS=58140/16/63, UDMA(66)
 hda: [mac] hda1 hda2 hda3 hda4 hda5
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 131072 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 176k init 4k chrp 8k prep
EXT3 FS on hda5, internal journal
Adding 524280k swap on /dev/hda3.  Priority:-1 extents:1
hda: Set PIO timing for mode 0, reg: 0x0c50032b
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0