[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Aug 20 22:56:21 UTC 2008 (Ubuntu 2.6.24-19.41-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a000 (usable) [ 0.000000] BIOS-e820: 000000000009a000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007dd90000 (usable) [ 0.000000] BIOS-e820: 000000007dd90000 - 000000007dd9e000 (ACPI data) [ 0.000000] BIOS-e820: 000000007dd9e000 - 000000007dde0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007dde0000 - 000000007de00000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 1117MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000ff780 [ 0.000000] Entering add_active_range(0, 0, 515472) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 515472 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 515472 [ 0.000000] On node 0 totalpages: 515472 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2235 pages used for memmap [ 0.000000] HighMem zone: 283861 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F9410 checksum 0 [ 0.000000] ACPI: RSDP 000F9410, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 7DD90000, 0048 (r1 Equus Nobilis 20080814 MSFT 97) [ 0.000000] ACPI: FACP 7DD90200, 0084 (r1 Equus Nobilis 20080814 MSFT 97) [ 0.000000] ACPI: DSDT 7DD905C0, 712C (r1 1ADTS 1ADTS010 10 INTL 20051117) [ 0.000000] ACPI: FACS 7DD9E000, 0040 [ 0.000000] ACPI: APIC 7DD90390, 006C (r1 Equus Nobilis 20080814 MSFT 97) [ 0.000000] ACPI: MCFG 7DD90400, 003C (r1 Equus Nobilis 20080814 MSFT 97) [ 0.000000] ACPI: SLIC 7DD90440, 0176 (r1 Equus Nobilis 20080814 MSFT 97) [ 0.000000] ACPI: OEMB 7DD9E040, 0072 (r1 Equus Nobilis 20080814 MSFT 97) [ 0.000000] ACPI: HPET 7DD985C0, 0038 (r1 Equus OEMHPET 20080814 MSFT 97) [ 0.000000] ACPI: ASF! 7DD98600, 0099 (r32 LEGEND I865PASF 1 INTL 20051117) [ 0.000000] ACPI: GSCI 7DD9E0C0, 2024 (r1 Equus GMCHSCI 20080814 MSFT 97) [ 0.000000] ACPI: SSDT 7DDA0A10, 04F0 (r1 PmRef CpuPm 3000 INTL 20051117) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 7:7 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 7:7 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7de00000:81000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009a000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511445 [ 0.000000] Kernel command line: root=UUID=a533c91b-8cab-40e9-a66c-3a8ce3b503ab ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1995.031 MHz processor. [ 19.325835] Console: colour VGA+ 80x25 [ 19.325838] console [tty0] enabled [ 19.326145] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 19.326438] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 19.403824] Memory: 2032084k/2061888k available (2177k kernel code, 28444k reserved, 1006k data, 368k init, 1144384k highmem) [ 19.403830] virtual kernel memory layout: [ 19.403831] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 19.403832] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 19.403833] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 19.403834] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 19.403835] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 19.403836] .data : 0xc03204c4 - 0xc041bdc4 (1006 kB) [ 19.403837] .text : 0xc0100000 - 0xc03204c4 (2177 kB) [ 19.403840] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 19.403880] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 19.404010] hpet clockevent registered [ 19.483972] Calibrating delay using timer specific routine.. 3994.07 BogoMIPS (lpj=7988140) [ 19.483992] Security Framework initialized [ 19.483998] SELinux: Disabled at boot. [ 19.484012] AppArmor: AppArmor initialized [ 19.484016] Failure registering capabilities with primary security module. [ 19.484023] Mount-cache hash table entries: 512 [ 19.484133] Initializing cgroup subsys ns [ 19.484138] Initializing cgroup subsys cpuacct [ 19.484147] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e39d 00000000 00000001 00000000 [ 19.484154] monitor/mwait feature present. [ 19.484155] using mwait in idle threads. [ 19.484159] CPU: L1 I cache: 32K, L1 D cache: 32K [ 19.484161] CPU: L2 cache: 3072K [ 19.484163] CPU: Physical Processor ID: 0 [ 19.484165] CPU: Processor Core ID: 0 [ 19.484166] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0008e39d 00000000 00000001 00000000 [ 19.484174] Compat vDSO mapped to ffffe000. [ 19.484186] Checking 'hlt' instruction... OK. [ 19.500350] SMP alternatives: switching to UP code [ 19.501968] Early unpacking initramfs... done [ 19.814133] ACPI: Core revision 20070126 [ 19.814182] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 19.818048] CPU0: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06 [ 19.818062] SMP alternatives: switching to SMP code [ 19.818796] Booting processor 1/1 eip 3000 [ 19.829186] Initializing CPU#1 [ 19.907730] Calibrating delay using timer specific routine.. 3989.99 BogoMIPS (lpj=7979991) [ 19.907736] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e39d 00000000 00000001 00000000 [ 19.907741] monitor/mwait feature present. [ 19.907743] CPU: L1 I cache: 32K, L1 D cache: 32K [ 19.907745] CPU: L2 cache: 3072K [ 19.907747] CPU: Physical Processor ID: 0 [ 19.907748] CPU: Processor Core ID: 1 [ 19.907749] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0008e39d 00000000 00000001 00000000 [ 19.908476] CPU1: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06 [ 19.908496] Total of 2 processors activated (7984.06 BogoMIPS). [ 19.908668] ENABLING IO-APIC IRQs [ 19.908847] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 20.055746] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 20.075748] Brought up 2 CPUs [ 20.075770] CPU0 attaching sched-domain: [ 20.075772] domain 0: span 03 [ 20.075774] groups: 01 02 [ 20.075776] CPU1 attaching sched-domain: [ 20.075778] domain 0: span 03 [ 20.075779] groups: 02 01 [ 20.075970] net_namespace: 64 bytes [ 20.075980] Booting paravirtualized kernel on bare hardware [ 20.076388] Time: 12:18:07 Date: 09/30/08 [ 20.076412] NET: Registered protocol family 16 [ 20.076570] EISA bus registered [ 20.076574] ACPI: bus type pci registered [ 20.076809] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 20.076810] PCI: Using configuration type 1 [ 20.076829] Setting up standard PCI resources [ 20.078853] ACPI: EC: Look up EC in DSDT [ 20.081861] ACPI: Interpreter enabled [ 20.081864] ACPI: (supports S0 S1 S3 S4 S5) [ 20.081877] ACPI: Using IOAPIC for interrupt routing [ 20.082140] Error attaching device data [ 20.082177] Error attaching device data [ 20.082211] Error attaching device data [ 20.082245] Error attaching device data [ 20.084602] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 20.090959] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 20.090961] ACPI: EC: driver started in interrupt mode [ 20.091064] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 20.093177] PCI: Transparent bridge - 0000:00:1e.0 [ 20.093218] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 20.093385] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 20.093469] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 20.093554] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 20.110735] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 20.110859] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 20.110978] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15) [ 20.111099] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15) [ 20.111220] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 20.111341] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *6 7 10 11 12 14 15) [ 20.111461] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 6 7 10 11 12 14 15) [ 20.111582] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15) [ 20.111710] Linux Plug and Play Support v0.97 (c) Adam Belay [ 20.111757] pnp: PnP ACPI init [ 20.111764] ACPI: bus type pnp registered [ 20.115896] pnp: PnP ACPI: found 15 devices [ 20.115898] ACPI: ACPI bus type pnp unregistered [ 20.115901] PnPBIOS: Disabled by ACPI PNP [ 20.116081] PCI: Using ACPI for IRQ routing [ 20.116083] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 20.163698] NET: Registered protocol family 8 [ 20.163700] NET: Registered protocol family 20 [ 20.163729] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 20.163733] hpet0: 4 64-bit timers, 14318180 Hz [ 20.164761] AppArmor: AppArmor Filesystem Enabled [ 20.167592] Time: tsc clocksource has been installed. [ 20.167603] Switched to high resolution mode on CPU 0 [ 20.167693] Switched to high resolution mode on CPU 1 [ 20.180577] system 00:01: iomem range 0xfed10000-0xfed19fff has been reserved [ 20.180585] system 00:08: ioport range 0x4c0-0x4cf has been reserved [ 20.180587] system 00:08: ioport range 0x4d2-0x4ff has been reserved [ 20.180590] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 20.180592] system 00:08: ioport range 0x800-0x87f has been reserved [ 20.180594] system 00:08: ioport range 0x500-0x53f has been reserved [ 20.180597] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 20.180599] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 20.180601] system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved [ 20.180607] system 00:0b: iomem range 0xffc00000-0xffefffff could not be reserved [ 20.180612] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved [ 20.180615] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved [ 20.180620] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 20.180625] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 20.180627] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved [ 20.180629] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 20.180632] system 00:0e: iomem range 0x100000-0x7ddfffff could not be reserved [ 20.180634] system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved [ 20.210977] PCI: Bridge: 0000:00:1c.0 [ 20.210980] IO window: d000-dfff [ 20.210986] MEM window: fdf00000-fdffffff [ 20.210990] PREFETCH window: f9f00000-f9ffffff [ 20.210996] PCI: Bridge: 0000:00:1c.1 [ 20.210999] IO window: e000-efff [ 20.211004] MEM window: fe000000-feafffff [ 20.211008] PREFETCH window: fa000000-fcffffff [ 20.211014] PCI: Bridge: 0000:00:1c.3 [ 20.211015] IO window: disabled. [ 20.211020] MEM window: feb00000-febfffff [ 20.211024] PREFETCH window: disabled. [ 20.211029] PCI: Bridge: 0000:00:1e.0 [ 20.211030] IO window: disabled. [ 20.211035] MEM window: disabled. [ 20.211039] PREFETCH window: disabled. [ 20.211067] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 20.211073] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 20.211096] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 [ 20.211102] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 20.211124] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18 [ 20.211130] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 20.211143] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 20.211152] NET: Registered protocol family 2 [ 20.248556] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 20.248740] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 20.249115] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 20.249293] TCP: Hash tables configured (established 131072 bind 65536) [ 20.249295] TCP reno registered [ 20.260606] checking if image is initramfs... it is [ 20.875999] Freeing initrd memory: 7316k freed [ 20.876686] audit: initializing netlink socket (disabled) [ 20.876699] audit(1222777088.348:1): initialized [ 20.876878] highmem bounce pool size: 64 pages [ 20.878545] VFS: Disk quotas dquot_6.5.1 [ 20.878606] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 20.878723] io scheduler noop registered [ 20.878725] io scheduler anticipatory registered [ 20.878726] io scheduler deadline registered [ 20.878736] io scheduler cfq registered (default) [ 20.878747] Boot video device is 0000:00:02.0 [ 20.878950] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 20.879006] assign_interrupt_mode Found MSI capability [ 20.879053] Allocate Port Service[0000:00:1c.0:pcie00] [ 20.879083] Allocate Port Service[0000:00:1c.0:pcie02] [ 20.879182] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 20.879238] assign_interrupt_mode Found MSI capability [ 20.879282] Allocate Port Service[0000:00:1c.1:pcie00] [ 20.879309] Allocate Port Service[0000:00:1c.1:pcie02] [ 20.879401] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 20.879456] assign_interrupt_mode Found MSI capability [ 20.879499] Allocate Port Service[0000:00:1c.3:pcie00] [ 20.879526] Allocate Port Service[0000:00:1c.3:pcie02] [ 20.879744] isapnp: Scanning for PnP cards... [ 21.233638] isapnp: No Plug & Play device found [ 21.255088] Real Time Clock Driver v1.12ac [ 21.255250] hpet_resources: 0xfed00000 is busy [ 21.255292] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 21.256320] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 21.256375] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 21.256458] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 21.278075] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 21.278080] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 21.295966] mice: PS/2 mouse device common for all mice [ 21.296057] EISA: Probing bus 0 at eisa.0 [ 21.296090] EISA: Detected 0 cards. [ 21.296093] cpuidle: using governor ladder [ 21.296094] cpuidle: using governor menu [ 21.296164] NET: Registered protocol family 1 [ 21.296187] Using IPI No-Shortcut mode [ 21.296211] registered taskstats version 1 [ 21.296303] Magic number: 8:815:330 [ 21.296335] hash matches device tty51 [ 21.296351] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 21.296352] EDD information not available. [ 21.296518] Freeing unused kernel memory: 368k freed [ 21.314323] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 22.482792] fuse init (API version 7.9) [ 22.500236] ACPI: SSDT 7DDA01C0, 0217 (r1 PmRef Cpu0Ist 3000 INTL 20051117) [ 22.500429] ACPI: SSDT 7DDA0470, 0594 (r1 PmRef Cpu0Cst 3001 INTL 20051117) [ 22.500739] Monitor-Mwait will be used to enter C-1 state [ 22.500742] Monitor-Mwait will be used to enter C-2 state [ 22.500744] Monitor-Mwait will be used to enter C-3 state [ 22.500850] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 22.501046] ACPI: SSDT 7DDA00F0, 00CC (r1 PmRef Cpu1Ist 3000 INTL 20051117) [ 22.501227] ACPI: SSDT 7DDA03E0, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20051117) [ 22.501705] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 22.501718] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 22.501729] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 22.504055] ACPI: Thermal Zone [THRM] (41 C) [ 22.703158] usbcore: registered new interface driver usbfs [ 22.703180] usbcore: registered new interface driver hub [ 22.711209] usbcore: registered new device driver usb [ 22.713139] USB Universal Host Controller Interface driver v3.0 [ 22.713186] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 22.713196] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 22.713199] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 22.713399] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 22.713428] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000b480 [ 22.713540] usb usb1: configuration #1 chosen from 1 choice [ 22.713564] hub 1-0:1.0: USB hub found [ 22.713571] hub 1-0:1.0: 2 ports detected [ 22.815120] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 19 [ 22.815131] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 22.815136] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 22.815157] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 22.815188] uhci_hcd 0000:00:1a.1: irq 19, io base 0x0000b400 [ 22.815285] usb usb2: configuration #1 chosen from 1 choice [ 22.815304] hub 2-0:1.0: USB hub found [ 22.815308] hub 2-0:1.0: 2 ports detected [ 22.897306] SCSI subsystem initialized [ 22.904650] libata version 3.00 loaded. [ 22.919047] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 22.919057] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 22.919062] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 22.919082] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 22.919110] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bc00 [ 22.919210] usb usb3: configuration #1 chosen from 1 choice [ 22.919230] hub 3-0:1.0: USB hub found [ 22.919234] hub 3-0:1.0: 2 ports detected [ 23.023005] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 [ 23.023015] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 23.023019] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 23.023040] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 23.023068] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000b880 [ 23.023165] usb usb4: configuration #1 chosen from 1 choice [ 23.023184] hub 4-0:1.0: USB hub found [ 23.023188] hub 4-0:1.0: 2 ports detected [ 23.053898] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 23.126931] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21 [ 23.126940] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 23.126944] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 23.126964] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 23.126991] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000b800 [ 23.127088] usb usb5: configuration #1 chosen from 1 choice [ 23.127108] hub 5-0:1.0: USB hub found [ 23.127111] hub 5-0:1.0: 2 ports detected [ 23.230989] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 21 [ 23.231000] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 23.231004] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 23.231027] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 23.234934] ehci_hcd 0000:00:1a.7: debug port 1 [ 23.234940] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 23.234946] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xfdeff400 [ 23.250765] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 23.250848] usb usb6: configuration #1 chosen from 1 choice [ 23.250868] hub 6-0:1.0: USB hub found [ 23.250872] hub 6-0:1.0: 4 ports detected [ 23.262230] usb 1-2: configuration #1 chosen from 1 choice [ 23.266166] usb 1-2: can't set config #1, error -71 [ 23.354815] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 [ 23.354828] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 23.354832] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 23.354852] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 23.358763] ehci_hcd 0000:00:1d.7: debug port 1 [ 23.358769] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 23.358775] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfdeff800 [ 23.374715] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 23.374830] usb usb7: configuration #1 chosen from 1 choice [ 23.374851] hub 7-0:1.0: USB hub found [ 23.374855] hub 7-0:1.0: 6 ports detected [ 23.477717] ata_piix 0000:00:1f.2: version 2.12 [ 23.477723] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 23.525617] Clocksource tsc unstable (delta = -3530498658 ns) [ 23.529612] Time: hpet clocksource has been installed. [ 23.537485] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 [ 23.537519] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 23.537666] scsi0 : ata_piix [ 23.537808] scsi1 : ata_piix [ 23.538776] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14 [ 23.538778] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15 [ 23.549221] usb 6-2: new high speed USB device using ehci_hcd and address 2 [ 23.553244] ata1.00: ATA-7: ST9120823AS, 3.AAB, max UDMA/133 [ 23.553249] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 23.554928] ata1.00: configured for UDMA/133 [ 23.573576] usb 6-2: configuration #1 chosen from 1 choice [ 23.591684] scsi 0:0:0:0: Direct-Access ATA ST9120823AS 3.AA PQ: 0 ANSI: 5 [ 23.591741] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 23.591767] ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 18 (level, low) -> IRQ 21 [ 23.591793] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 23.591823] scsi2 : ata_piix [ 23.591858] scsi3 : ata_piix [ 23.592825] ata3: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc080 irq 21 [ 23.592828] ata4: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xc088 irq 21 [ 23.609377] usb 1-2: USB disconnect, address 2 [ 23.653857] ata4.00: ATAPI: Optiarc DVD RW AD-7560S, SX01, max UDMA/100 [ 23.654393] usb 7-1: new high speed USB device using ehci_hcd and address 2 [ 23.672565] usb 7-1: configuration #1 chosen from 1 choice [ 23.681022] ata4.00: configured for UDMA/100 [ 23.681592] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7560S SX01 PQ: 0 ANSI: 5 [ 23.681756] r8169 Gigabit Ethernet driver 2.2LK loaded [ 23.681809] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 23.681847] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 23.682248] eth0: RTL8168c/8111c at 0xf8836000, 00:21:85:4a:b9:ed, XID 3c4000c0 IRQ 220 [ 23.791454] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 23.810074] usb 2-2: configuration #1 chosen from 1 choice [ 23.811988] usbcore: registered new interface driver libusual [ 23.816695] Initializing USB Mass Storage driver... [ 23.817601] scsi4 : SCSI emulation for USB Mass Storage devices [ 23.818073] usbcore: registered new interface driver usb-storage [ 23.818077] USB Mass Storage support registered. [ 23.818136] usb-storage: device found at 2 [ 23.818138] usb-storage: waiting for device to settle before scanning [ 23.825691] usbcore: registered new interface driver hiddev [ 23.838463] input: Microsoft Microsoft Wireless Optical Mouse® 1.00 as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0/input/input2 [ 23.840828] input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.00] on usb-0000:00:1a.1-2 [ 23.840840] usbcore: registered new interface driver usbhid [ 23.840843] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 23.891440] Driver 'sd' needs updating - please use bus_type methods [ 23.891506] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 23.891516] sd 0:0:0:0: [sda] Write Protect is off [ 23.891518] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 23.891532] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.891576] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 23.891585] sd 0:0:0:0: [sda] Write Protect is off [ 23.891586] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 23.891600] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.891603] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 23.913244] sda1 sda2 < sda5 sda6 > [ 23.913957] sd 0:0:0:0: [sda] Attached SCSI disk [ 23.918130] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 23.918146] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 23.922597] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 23.922600] Uniform CD-ROM driver Revision: 3.20 [ 23.922636] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 24.018546] Attempting manual resume [ 24.018548] swsusp: Resume From Partition 8:6 [ 24.018550] PM: Checking swsusp image. [ 24.020803] PM: Resume from disk failed. [ 24.039102] kjournald starting. Commit interval 5 seconds [ 24.039110] EXT3-fs: mounted filesystem with ordered data mode. [ 24.761681] usb-storage: device scan complete [ 24.762920] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 24.765686] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 24.765720] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 25.886832] ip_tables: (C) 2000-2006 Netfilter Core Team [ 25.921810] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 26.685499] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 26.809186] input: Power Button (FF) as /devices/virtual/input/input3 [ 26.836266] ACPI: Power Button (FF) [PWRF] [ 26.836337] input: Lid Switch as /devices/virtual/input/input4 [ 26.838348] ACPI: Lid Switch [LID0] [ 26.838442] input: Sleep Button (CM) as /devices/virtual/input/input5 [ 26.852495] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 26.857240] ACPI: Sleep Button (CM) [SLPB] [ 26.857312] input: Power Button (CM) as /devices/virtual/input/input6 [ 26.872693] Linux agpgart interface v0.102 [ 26.881227] ACPI: Power Button (CM) [PWRB] [ 26.881828] agpgart: Detected an Intel Intel Integrated Graphics Device Chipset. [ 26.883631] agpgart: Detected 32252K stolen memory. [ 26.895304] agpgart: AGP aperture is 256M @ 0xd0000000 [ 27.235713] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 27.263996] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 27.728802] ACPI: Battery Slot [BAT1] (battery present) [ 27.728870] ACPI: WMI-Acer: Mapper loaded [ 27.730909] ACPI: AC Adapter [ADP1] (on-line) [ 27.807691] Linux video capture interface: v2.00 [ 27.856343] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 27.856365] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 27.889458] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 27.962835] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0) [ 27.978296] usbcore: registered new interface driver uvcvideo [ 27.978301] USB Video Class driver (v0.1.0) [ 28.047669] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 28.495257] r8169: eth0: link up [ 28.647282] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0 [ 28.647286] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 28.647377] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 28.647392] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 28.647411] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 29.105252] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008 [ 29.176539] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 29.477489] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels [ 29.477869] wmaster0: Selected rate control algorithm 'iwl-3945-rs' [ 29.566601] loop: module loaded [ 29.606986] lp: driver loaded but no devices found [ 29.698228] Adding 3156732k swap on /dev/sda6. Priority:-1 extents:1 across:3156732k [ 29.746817] NET: Registered protocol family 17 [ 29.805234] EXT3 FS on sda5, internal journal