480416] pci 0000:00:1c.0: PME# disabled [ 0.480490] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.480497] pci 0000:00:1c.1: PME# disabled [ 0.480571] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.480578] pci 0000:00:1c.2: PME# disabled [ 0.480649] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] [ 0.480713] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] [ 0.480779] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] [ 0.480849] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc504c00-0xfc504fff] [ 0.480898] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.480906] pci 0000:00:1d.7: PME# disabled [ 0.481076] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.481084] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.481124] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.481132] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.481140] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.481148] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.481156] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] [ 0.481230] pci 0000:00:1f.2: reg 10 io port: [0x1c00-0x1c07] [ 0.481238] pci 0000:00:1f.2: reg 14 io port: [0x18d4-0x18d7] [ 0.481246] pci 0000:00:1f.2: reg 18 io port: [0x18d8-0x18df] [ 0.481254] pci 0000:00:1f.2: reg 1c io port: [0x18d0-0x18d3] [ 0.481262] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] [ 0.481270] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc504000-0xfc5047ff] [ 0.481291] pci 0000:00:1f.2: PME# supported from D3hot [ 0.481298] pci 0000:00:1f.2: PME# disabled [ 0.481333] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] [ 0.481360] pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f] [ 0.481514] pci 0000:02:00.0: reg 10 64bit mmio: [0xf6000000-0xf600ffff] [ 0.481573] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.481582] pci 0000:02:00.0: PME# disabled [ 0.481653] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.481658] pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff] [ 0.481666] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff] [ 0.481735] pci 0000:04:00.0: reg 10 32bit mmio: [0xf8000000-0xf8003fff] [ 0.481803] pci 0000:04:00.0: supports D1 D2 [ 0.481876] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] [ 0.481881] pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xf9ffffff] [ 0.481889] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff] [ 0.481953] pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff] [ 0.481958] pci 0000:00:1c.2: bridge 32bit mmio: [0xfa000000-0xfbffffff] [ 0.481966] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff] [ 0.482027] pci 0000:0f:06.0: reg 10 32bit mmio: [0xfc204000-0xfc204fff] [ 0.482041] pci 0000:0f:06.0: supports D1 D2 [ 0.482043] pci 0000:0f:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.482051] pci 0000:0f:06.0: PME# disabled [ 0.482105] pci 0000:0f:06.1: reg 10 32bit mmio: [0xfc206000-0xfc2067ff] [ 0.482114] pci 0000:0f:06.1: reg 14 32bit mmio: [0xfc200000-0xfc203fff] [ 0.482167] pci 0000:0f:06.1: supports D1 D2 [ 0.482168] pci 0000:0f:06.1: PME# supported from D0 D1 D2 D3hot [ 0.482176] pci 0000:0f:06.1: PME# disabled [ 0.482227] pci 0000:0f:06.2: reg 10 32bit mmio: [0xfc205000-0xfc205fff] [ 0.482284] pci 0000:0f:06.2: supports D1 D2 [ 0.482286] pci 0000:0f:06.2: PME# supported from D0 D1 D2 D3hot [ 0.482293] pci 0000:0f:06.2: PME# disabled [ 0.482345] pci 0000:0f:06.3: reg 10 32bit mmio: [0xfc206800-0xfc2068ff] [ 0.482403] pci 0000:0f:06.3: supports D1 D2 [ 0.482405] pci 0000:0f:06.3: PME# supported from D0 D1 D2 D3hot [ 0.482412] pci 0000:0f:06.3: PME# disabled [ 0.482477] pci 0000:00:1e.0: transparent bridge [ 0.482487] pci 0000:00:1e.0: bridge 32bit mmio: [0xfc200000-0xfc2fffff] [ 0.482545] bus 00 -> node 0 [ 0.482552] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.482975] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.483154] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.483330] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.483531] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 4.284601] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11) [ 4.284764] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11) [ 4.284923] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11) [ 4.285085] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11) [ 4.285242] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11) [ 4.285398] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 *11) [ 4.285554] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 *11) [ 4.285710] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11) [ 4.286373] SCSI subsystem initialized [ 4.286415] libata version 3.00 loaded. [ 4.286546] usbcore: registered new interface driver usbfs [ 4.286609] usbcore: registered new interface driver hub [ 4.286656] usbcore: registered new device driver usb [ 4.286808] PCI: Using ACPI for IRQ routing [ 4.290989] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 4.290997] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 4.293966] Switched to high resolution mode on CPU 0 [ 4.295011] pnp: PnP ACPI init [ 4.295025] ACPI: bus type pnp registered [ 4.501069] pnp: PnP ACPI: found 11 devices [ 4.501076] ACPI: ACPI bus type pnp unregistered [ 4.501092] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 4.501097] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 4.501103] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 4.501108] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 4.501113] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 4.501119] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 4.501124] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved [ 4.501134] system 00:06: iomem range 0xfed00000-0xfed003ff has been reserved [ 4.501143] system 00:08: ioport range 0x800-0x80f has been reserved [ 4.501148] system 00:08: ioport range 0x1000-0x107f has been reserved [ 4.501153] system 00:08: ioport range 0x1180-0x11bf has been reserved [ 4.501159] system 00:08: ioport range 0xfe00-0xfe00 has been reserved [ 4.501164] system 00:08: iomem range 0xff800000-0xff800fff has been reserved [ 4.506127] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 4.506135] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 4.506144] pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff [ 4.506152] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff [ 4.506164] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 [ 4.506169] pci 0000:00:1c.1: IO window: 0x3000-0x3fff [ 4.506178] pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff [ 4.506185] pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff [ 4.506197] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06 [ 4.506202] pci 0000:00:1c.2: IO window: 0x4000-0x4fff [ 4.506211] pci 0000:00:1c.2: MEM window: 0xfa000000-0xfbffffff [ 4.506218] pci 0000:00:1c.2: PREFETCH window: 0x000000f4000000-0x000000f5ffffff [ 4.506232] pci 0000:0f:06.0: CardBus bridge, secondary bus 0000:10 [ 4.506236] pci 0000:0f:06.0: IO window: 0x005000-0x0050ff [ 4.506243] pci 0000:0f:06.0: IO window: 0x005400-0x0054ff [ 4.506251] pci 0000:0f:06.0: PREFETCH window: 0x88000000-0x8bffffff [ 4.506259] pci 0000:0f:06.0: MEM window: 0x90000000-0x93ffffff [ 4.506267] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0f [ 4.506273] pci 0000:00:1e.0: IO window: 0x5000-0x5fff [ 4.506281] pci 0000:00:1e.0: MEM window: 0xfc200000-0xfc2fffff [ 4.506289] pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff [ 4.506314] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.506323] pci 0000:00:1c.0: setting latency timer to 64 [ 4.506333] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.506340] pci 0000:00:1c.1: setting latency timer to 64 [ 4.506350] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.506358] pci 0000:00:1c.2: setting latency timer to 64 [ 4.506366] pci 0000:00:1e.0: setting latency timer to 64 [ 4.506377] pci 0000:0f:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4.506387] bus: 00 index 0 io port: [0x00-0xffff] [ 4.506391] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 4.506396] bus: 02 index 0 io port: [0x2000-0x2fff] [ 4.506400] bus: 02 index 1 mmio: [0xf6000000-0xf7ffffff] [ 4.506404] bus: 02 index 2 mmio: [0xf0000000-0xf1ffffff] [ 4.506408] bus: 02 index 3 mmio: [0x0-0x0] [ 4.506411] bus: 04 index 0 io port: [0x3000-0x3fff] [ 4.506415] bus: 04 index 1 mmio: [0xf8000000-0xf9ffffff] [ 4.506419] bus: 04 index 2 mmio: [0xf2000000-0xf3ffffff] [ 4.506423] bus: 04 index 3 mmio: [0x0-0x0] [ 4.506426] bus: 06 index 0 io port: [0x4000-0x4fff] [ 4.506430] bus: 06 index 1 mmio: [0xfa000000-0xfbffffff] [ 4.506434] bus: 06 index 2 mmio: [0xf4000000-0xf5ffffff] [ 4.506438] bus: 06 index 3 mmio: [0x0-0x0] [ 4.506442] bus: 0f index 0 io port: [0x5000-0x5fff] [ 4.506446] bus: 0f index 1 mmio: [0xfc200000-0xfc2fffff] [ 4.506449] bus: 0f index 2 mmio: [0x88000000-0x8bffffff] [ 4.506453] bus: 0f index 3 io port: [0x00-0xffff] [ 4.506457] bus: 0f index 4 mmio: [0x000000-0xffffffffffffffff] [ 4.506462] bus: 10 index 0 io port: [0x5000-0x50ff] [ 4.506465] bus: 10 index 1 io port: [0x5400-0x54ff] [ 4.506469] bus: 10 index 2 mmio: [0x88000000-0x8bffffff] [ 4.506473] bus: 10 index 3 mmio: [0x90000000-0x93ffffff] [ 4.506485] NET: Registered protocol family 2 [ 4.516051] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 4.516452] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 4.519262] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 4.519684] TCP: Hash tables configured (established 262144 bind 65536) [ 4.519690] TCP reno registered [ 4.522096] NET: Registered protocol family 1 [ 4.522351] Simple Boot Flag at 0x36 set to 0x1 [ 4.523036] audit: initializing netlink socket (disabled) [ 4.523054] type=2000 audit(1226827269.523:1): initialized [ 4.525226] VFS: Disk quotas dquot_6.5.1 [ 4.525307] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 4.525628] msgmni has been set to 4003 [ 4.525790] alg: No test for stdrng (krng) [ 4.525887] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 4.525894] io scheduler noop registered [ 4.525898] io scheduler anticipatory registered [ 4.525901] io scheduler deadline registered [ 4.525957] io scheduler cfq registered (default) [ 4.525973] pci 0000:00:02.0: Boot video device [ 4.933176] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 4.933227] pcieport-driver 0000:00:1c.0: found MSI capability [ 4.933270] pcieport-driver 0000:00:1c.0: irq 47 for MSI/MSI-X [ 4.933287] pci_express 0000:00:1c.0:pcie00: allocate port service [ 4.933323] pci_express 0000:00:1c.0:pcie02: allocate port service [ 4.933353] pci_express 0000:00:1c.0:pcie03: allocate port service [ 4.933448] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 4.933497] pcieport-driver 0000:00:1c.1: found MSI capability [ 4.933534] pcieport-driver 0000:00:1c.1: irq 46 for MSI/MSI-X [ 4.933550] pci_express 0000:00:1c.1:pcie00: allocate port service [ 4.933581] pci_express 0000:00:1c.1:pcie02: allocate port service [ 4.933614] pci_express 0000:00:1c.1:pcie03: allocate port service [ 4.933710] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 4.933760] pcieport-driver 0000:00:1c.2: found MSI capability [ 4.933797] pcieport-driver 0000:00:1c.2: irq 45 for MSI/MSI-X [ 4.933813] pci_express 0000:00:1c.2:pcie00: allocate port service [ 4.933844] pci_express 0000:00:1c.2:pcie02: allocate port service [ 4.933876] pci_express 0000:00:1c.2:pcie03: allocate port service [ 4.934363] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010100000, using 7616k, total 7616k [ 4.934372] vesafb: mode is 1280x800x32, linelength=5120, pages=0 [ 4.934376] vesafb: scrolling: redraw [ 4.934380] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 4.981243] Console: switching to colour frame buffer device 160x50 [ 5.023998] fb0: VESA VGA frame buffer device [ 5.024366] ACPI: Extensa 5220 detected - disabling mwait for CPU C-states [ 5.026110] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 5.026577] processor ACPI0007:00: registered as cooling_device0 [ 5.026984] ACPI: Processor [CPU0] (supports 8 throttling states) [ 5.259559] Linux agpgart interface v0.103 [ 5.259870] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 5.260522] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 5.264188] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 5.264732] [drm] Initialized drm 1.1.0 20060810 [ 5.265055] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets [ 5.265833] intelfb: Version 0.9.6 [ 5.266151] intelfb 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.266629] intelfb: Cannot reserve FB region. [ 5.268102] brd: module loaded [ 5.268331] tg3.c:v3.94 (August 14, 2008) [ 5.268656] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.269165] tg3 0000:02:00.0: setting latency timer to 64 [ 5.277396] eth0: Tigon3 [partno(BCM95787m) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1d:72:07:18:63 [ 5.278151] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 5.278655] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 5.287064] Driver 'sd' needs updating - please use bus_type methods [ 5.295847] ahci 0000:00:1f.2: version 3.0 [ 5.295863] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.305037] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X [ 5.305112] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 5.314668] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part [ 5.324478] ahci 0000:00:1f.2: setting latency timer to 64 [ 5.324739] scsi0 : ahci [ 5.334718] scsi1 : ahci [ 5.344649] scsi2 : ahci [ 5.354683] ata1: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504100 irq 44 [ 5.365274] ata2: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504180 irq 44 [ 5.375899] ata3: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504200 irq 44 [ 5.691026] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.702599] ACPI Warning (nspredef-0852): \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer [20080926] [ 5.714641] ata1.00: _GTF unexpected object type 0x1 [ 5.773924] ata1.00: ATA-7: WDC WD800BEVS-22RST0, 04.01G04, max UDMA/133 [ 5.786567] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 5.800422] ata1.00: _GTF unexpected object type 0x1 [ 5.813710] ata1.00: configured for UDMA/133 [ 6.143023] ata2: SATA link down (SStatus 0 SControl 300) [ 6.472021] ata3: SATA link down (SStatus 0 SControl 300) [ 6.496111] scsi 0:0:0:0: Direct-Access ATA WDC WD800BEVS-22 04.0 PQ: 0 ANSI: 5 [ 6.510549] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) [ 6.525260] sd 0:0:0:0: [sda] Write Protect is off [ 6.540074] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.540109] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.555613] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) [ 6.571045] sd 0:0:0:0: [sda] Write Protect is off [ 6.586243] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.586266] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.601744] sda: sda1 sda2 < sda5 sda6 sda7 > [ 6.711248] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.726703] ata_piix 0000:00:1f.1: version 2.12 [ 6.726717] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 6.742230] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 6.742312] scsi3 : ata_piix [ 6.757582] scsi4 : ata_piix [ 6.773469] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 6.788883] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 6.993498] ata4.00: ATAPI: Slimtype DVD A DS8A1P, CA11, max UDMA/33 [ 7.049418] ata4.00: configured for UDMA/33 [ 7.238345] isa bounce pool size: 16 pages [ 7.254818] scsi 3:0:0:0: CD-ROM Slimtype DVD A DS8A1P CA11 PQ: 0 ANSI: 5 [ 7.269778] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.284468] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 7.299332] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 7.299336] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 7.314248] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 7.333045] ehci_hcd 0000:00:1a.7: debug port 1 [ 7.347361] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 7.347374] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc504800 [ 7.371011] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 7.384858] usb usb1: configuration #1 chosen from 1 choice [ 7.398608] hub 1-0:1.0: USB hub found [ 7.412100] hub 1-0:1.0: 4 ports detected [ 7.425609] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 7.439128] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 7.439132] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 7.452527] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 7.470103] ehci_hcd 0000:00:1d.7: debug port 1 [ 7.483815] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 7.483826] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00 [ 7.507011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 7.520823] usb usb2: configuration #1 chosen from 1 choice [ 7.534851] hub 2-0:1.0: USB hub found [ 7.548618] hub 2-0:1.0: 6 ports detected [ 7.562101] usbcore: registered new interface driver libusual [ 7.575111] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 7.598774] i8042.c: Detected active multiplexing controller, rev 1.1. [ 7.618902] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 7.632007] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 7.645103] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 7.657954] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 7.670812] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 7.683600] mice: PS/2 mouse device common for all mice [ 7.696034] rtc_cmos 00:09: RTC can wake from S4 [ 7.708369] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 [ 7.720624] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 7.732983] cpuidle: using governor ladder [ 7.745240] cpuidle: using governor menu [ 7.757295] TCP cubic registered [ 7.768720] NET: Registered protocol family 17 [ 7.780440] PM: Resume from partition /dev/sda7 [ 7.780442] PM: Checking hibernation image. [ 7.780621] PM: Resume from disk failed. [ 7.780756] Magic number: 0:10:374 [ 7.792220] rtc_cmos 00:09: setting system clock to 2008-11-16 09:21:13 UTC (1226827273) [ 7.804006] Marking TSC unstable due to TSC halts in idle [ 7.821285] input: AT Translated Set 2 keyboard as /class/input/input0 [ 7.905056] usb 2-3: new high speed USB device using ehci_hcd and address 2 [ 8.000035] Clocksource tsc unstable (delta = -74716758 ns) [ 8.091346] usb 2-3: configuration #1 chosen from 1 choice [ 8.103896] hub 2-3:1.0: USB hub found [ 8.116348] hub 2-3:1.0: 4 ports detected [ 8.231043] usb 2-5: new high speed USB device using ehci_hcd and address 3 [ 8.295641] EXT3-fs: mounted filesystem with writeback data mode. [ 8.307729] VFS: Mounted root (ext3 filesystem) readonly. [ 8.319860] Freeing unused kernel memory: 336k freed [ 8.332115] kjournald starting. Commit interval 5 seconds [ 8.357485] usb 2-5: config 1 interface 0 altsetting 0 bulk endpoint 0x82 has invalid maxpacket 376 [ 8.418730] usb 2-5: configuration #1 chosen from 1 choice [ 8.505115] usb 2-3.1: new low speed USB device using ehci_hcd and address 4 [ 8.608604] usb 2-3.1: configuration #1 chosen from 1 choice [ 8.695115] usb 2-3.4: new low speed USB device using ehci_hcd and address 5 [ 8.799986] usb 2-3.4: configuration #1 chosen from 1 choice [ 13.668540] ACPI: WMI: Mapper loaded [ 13.773572] input: Power Button (FF) as /class/input/input1 [ 13.798156] ACPI: Power Button (FF) [PWRF] [ 13.841162] input: Lid Switch as /class/input/input2 [ 13.869543] thermal LNXTHERM:01: registered as thermal_zone0 [ 13.894407] ACPI: Thermal Zone [TZS0] (64 C) [ 13.930161] ACPI: Lid Switch [LID0] [ 13.946217] acer-wmi: Acer Laptop ACPI-WMI Extras [ 13.968080] thermal LNXTHERM:02: registered as thermal_zone1 [ 14.002141] input: Sleep Button (CM) as /class/input/input3 [ 14.041000] ACPI: Thermal Zone [TZS1] (65 C) [ 14.068249] acpi device:05: registered as cooling_device1 [ 14.083534] input: Video Bus as /class/input/input4 [ 14.107169] ACPI: Sleep Button (CM) [SLPB] [ 14.157161] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 14.352031] uhci_hcd: USB Universal Host Controller Interface driver [ 14.374968] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 14.390597] ACPI: AC Adapter [ADP1] (on-line) [ 14.426452] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 14.426457] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 14.456365] irda_init() [ 14.456383] NET: Registered protocol family 23 [ 14.486018] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 14.507877] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 [ 14.557292] usb usb3: configuration #1 chosen from 1 choice [ 14.589692] nsc-ircc 00:0a: activated [ 14.608497] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [ 14.608583] nsc-ircc, chip->init [ 14.645840] nsc-ircc, Found chip at base=0x02e [ 14.659997] hub 3-0:1.0: USB hub found [ 14.697140] ACPI Warning (nspredef-0858): \_SB_.PCI0.LPCB.EC0_.BAT0._BIF: Return Package type mismatch at index 9 - found Buffer, expected String [20080926] [ 14.734490] hub 3-0:1.0: 2 ports detected [ 14.750928] nsc-ircc, driver loaded (Dag Brattli) [ 14.774732] b43-pci-bridge 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 14.805488] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 14.821775] ACPI: Battery Slot [BAT0] (battery present) [ 14.851321] IrDA: Registered device irda0 [ 14.870430] b43-pci-bridge 0000:04:00.0: setting latency timer to 64 [ 14.907176] ssb: Sonics Silicon Backplane found on PCI device 0000:04:00.0 [ 14.924644] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 14.924649] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 14.953249] nsc-ircc, Found dongle: Supports SIR Mode only [ 14.994592] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 15.016244] nsc-ircc, chip->init [ 15.053990] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 15.075101] nsc-ircc, Found chip at base=0x02e [ 15.091045] yenta_cardbus 0000:0f:06.0: CardBus bridge found [1025:011f] [ 15.133231] usb usb4: configuration #1 chosen from 1 choice [ 15.150664] nsc-ircc, driver loaded (Dag Brattli) [ 15.165533] yenta_cardbus 0000:0f:06.0: Using CSCINT to route CSC interrupts to PCI [ 15.211116] hub 4-0:1.0: USB hub found [ 15.226447] nsc_ircc_open(), can't get iobase of 0x2f8 [ 15.248391] yenta_cardbus 0000:0f:06.0: Routing CardBus interrupts to PCI [ 15.266068] Driver 'sr' needs updating - please use bus_type methods [ 15.311144] hub 4-0:1.0: 2 ports detected [ 15.337451] yenta_cardbus 0000:0f:06.0: TI: mfunc 0x01aa1b22, devctl 0x64 [ 15.353758] dvb-usb: found a 'WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U)' in warm state. [ 15.387600] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 15.404051] input: X10 Wireless Technology Inc USB Receiver as /class/input/input5 [ 15.422907] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 15.448472] dvb-usb: will use the device's hardware PID filter (table count: 15). [ 15.479191] usbcore: registered new interface driver hiddev [ 15.499144] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 15.516068] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 15.525781] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS... [ 15.544246] Uniform CD-ROM driver Revision: 3.20 [ 15.561071] usb 2-3.1: Weird data, len=1 ff 00 00 00 00 00 ... [ 15.588136] usbcore: registered new interface driver ati_remote [ 15.605200] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 15.637402] DVB: registering new adapter (WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U)) [ 15.660405] input: Logitech USB-PS/2 Optical Mouse as /class/input/input6 [ 15.696122] ati_remote: 2.2.1:ATI/X10 RF USB Remote Control [ 15.739972] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 15.758164] yenta_cardbus 0000:0f:06.0: ISA IRQ mask 0x0cf0, PCI irq 22 [ 15.776114] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 15.776119] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 15.793617] yenta_cardbus 0000:0f:06.0: Socket status: 30000006 [ 15.818380] DVB: registering adapter 0 frontend 0 (WideView USB DVB-T)... [ 15.841215] generic-usb 0003:046D:C043.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-3.4/input0 [ 15.860068] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 15.868501] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 15.886770] pci_bus 0000:0f: Raising subordinate bus# of parent bus (#0f) from #10 to #13 [ 15.913409] usbcore: registered new interface driver usbhid [ 15.932658] input: IR-receiver inside an USB DVB receiver as /class/input/input7 [ 15.953646] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 [ 15.972233] yenta_cardbus 0000:0f:06.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff [ 15.993362] usbhid: v2.6:USB HID core driver [ 16.014185] usb usb5: configuration #1 chosen from 1 choice [ 16.032917] yenta_cardbus 0000:0f:06.0: pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff [ 16.054159] dvb-usb: schedule remote query interval to 300 msecs. [ 16.072910] dvb-usb: WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U) successfully initialized and connected. [ 16.095092] hub 5-0:1.0: USB hub found [ 16.115347] yenta_cardbus 0000:0f:06.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff [ 16.136477] usbcore: registered new interface driver dvb_usb_dtt200u [ 16.161584] hub 5-0:1.0: 2 ports detected [ 16.189335] tifm_7xx1 0000:0f:06.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 16.239380] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 16.284953] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 16.284959] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 16.320797] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 16.358617] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880 [ 16.392531] usb usb6: configuration #1 chosen from 1 choice [ 16.415710] hub 6-0:1.0: USB hub found [ 16.437335] hub 6-0:1.0: 2 ports detected [ 16.464694] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 16.510746] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 16.510752] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 16.541804] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 16.563147] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 [ 16.584620] usb usb7: configuration #1 chosen from 1 choice [ 16.606595] hub 7-0:1.0: USB hub found [ 16.626981] hub 7-0:1.0: 2 ports detected [ 16.769118] cfg80211: Calling CRDA to update world regulatory domain [ 16.847579] b43-phy0: Broadcom 4311 WLAN found [ 16.905319] phy0: Selected rate control algorithm 'pid' [ 16.940436] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x12a0b1, caps: 0xa04713/0x204000 [ 17.015725] input: SynPS/2 Synaptics TouchPad as /class/input/input8 [ 17.034330] Broadcom 43xx driver loaded [ Features: PR, Firmware-ID: FW13 ] [ 18.329286] fuse init (API version 7.10) [ 18.378091] dvb-usb: recv bulk message failed: -110 [ 19.024218] Adding 995988k swap on /dev/sda7. Priority:-1 extents:1 across:995988k [ 19.621539] EXT3 FS on sda6, internal journal [ 21.300747] tg3 0000:02:00.0: irq 43 for MSI/MSI-X [ 22.918464] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 22.918467] tg3: eth0: Flow control is off for TX and off for RX. [ 25.611718] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 37.971816] pci 0000:00:02.0: setting latency timer to 64 [ 37.972444] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 38.107963] resource map sanity check conflict: 0xd0000000 0xdfffffff 0xd0000000 0xd076ffff vesafb [ 38.107972] ------------[ cut here ]------------ [ 38.107974] WARNING: at arch/x86/mm/ioremap.c:226 __ioremap_caller+0x331/0x380() [ 38.107976] Modules linked in: i915 sbs sbshc fan vfat fat ext2 fuse pcmcia arc4 ecb b43 mac80211 cfg80211 input_polldev psmouse serio_raw usbhid hid sg ati_remote dvb_usb_dtt200u dvb_usb dvb_core sr_mod cdrom tifm_7xx1 tifm_core yenta_socket rsrc_nonstatic snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm ssb snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device nsc_ircc snd soundcore snd_page_alloc irda battery crc_ccitt ac uhci_hcd video acer_wmi rfkill thermal button led_class evdev wmi [ 38.108029] Pid: 3837, comm: Xorg Not tainted 2.6.28-rc4 #74 [ 38.108031] Call Trace: [ 38.108037] [] warn_on_slowpath+0x5f/0x90 [ 38.108041] [] ? change_page_attr_set_clr+0xdc/0x380 [ 38.108044] [] ? _set_memory_uc+0x22/0x30 [ 38.108048] [] ? ioremap_change_attr+0x2d/0x50 [ 38.108051] [] __ioremap_caller+0x331/0x380 [ 38.108061] [] ? i915_gem_entervt_ioctl+0x2b8/0x5a0 [i915] [ 38.108064] [] ioremap_wc+0x26/0x30 [ 38.108070] [] i915_gem_entervt_ioctl+0x2b8/0x5a0 [i915] [ 38.108074] [] drm_ioctl+0x10a/0x320 [ 38.108080] [] ? i915_gem_entervt_ioctl+0x0/0x5a0 [i915] [ 38.108084] [] vfs_ioctl+0x7d/0xa0 [ 38.108087] [] do_vfs_ioctl+0x74/0x470 [ 38.108092] [] ? security_file_permission+0x11/0x20 [ 38.108095] [] sys_ioctl+0x99/0xa0 [ 38.108099] [] system_call_fastpath+0x16/0x1b [ 38.108101] ---[ end trace bb4b8350fc49456b ]---