X.Org X Server 1.5.2 Release Date: 10 October 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-16-server x86_64 Ubuntu Current Operating System: Linux ryuk 2.6.27-7-generic #1 SMP Tue Nov 4 19:33:06 UTC 2008 x86_64 Build Date: 24 October 2008 09:06:49AM xorg-server 2:1.5.2-2ubuntu3 (buildd@crested.buildd) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 20 10:50:49 2008 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Configured Monitor" (**) | |-->Device "Configured Video Device" (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Open ACPI successful (/var/run/acpid.socket) (II) Loader magic: 0x7b7320 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 4.1 X.Org XInput driver : 2.1 X.Org Server Extension : 1.1 X.Org Font Renderer : 0.6 (II) Loader running on linux (++) using VT number 7 (--) PCI: (0@0:3:5) nVidia Corporation MCP79 Co-processor rev 177, Mem @ 0xd4000000/524288 (--) PCI:*(0@2:0:0) nVidia Corporation GeForce 9400M rev 177, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00001000/128, BIOS @ 0x????????/131072 (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 1.1 (==) AIGLX enabled (==) Exporting typical set of GLX visuals (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.5.2, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.6 (II) Loading font FreeType (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 1.1 (II) Loading extension XFree86-DRI (II) LoadModule: "nouveau" (II) Loading /usr/lib/xorg/modules/drivers//nouveau_drv.so (II) Module nouveau: vendor="X.Org Foundation" compiled for 1.5.2, module version = 0.0.10 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 4.1 (II) NOUVEAU driver Date: Sun Oct 26 03:51:36 2008 +0000 (II) NOUVEAU driver for NVIDIA chipset families : RIVA TNT (NV04) RIVA TNT2 (NV05) GeForce 256 (NV10) GeForce 2 (NV11, NV15) GeForce 4MX (NV17, NV18) GeForce 3 (NV20) GeForce 4Ti (NV25, NV28) GeForce FX (NV3x) GeForce 6 (NV4x) GeForce 7 (G7x) GeForce 8 (G8x) (II) Primary Device is: PCI 02@00:00:0 (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (--) NOUVEAU(0): Chipset: "NVIDIA NVAC" (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 4.1 (II) NOUVEAU(0): Initializing int10 (II) NOUVEAU(0): Primary V_BIOS segment is: 0xc000 (--) NOUVEAU(0): VESA-HACK: Console VGA mode is 0x3 (II) NOUVEAU(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 (==) NOUVEAU(0): Depth 24, (==) framebuffer bpp 32 (==) NOUVEAU(0): RGB weight 888 (==) NOUVEAU(0): Default visual is TrueColor (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.5.2, module version = 0.1.0 ABI class: X.Org Video Driver, version 4.1 (==) NOUVEAU(0): Randr1.2 support enabled (==) NOUVEAU(0): Using HW cursor (--) NOUVEAU(0): Linear framebuffer at 0xC0000000 (--) NOUVEAU(0): MMIO registers at 0xD2000000 (II) Loading sub module "dri" (II) LoadModule: "dri" (II) Reloading /usr/lib/xorg/modules/extensions//libdri.so (II) NOUVEAU(0): Loaded DRI module drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: Searching for BusID pci:0000:02:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: drmOpenMinor returns 10 drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0 (II) NOUVEAU(0): [dri] Found DRI library version 1.3.0 and kernel module version 0.0.11 (II) NOUVEAU(0): Initial CRTC_OWNER is 0 (II) NOUVEAU(0): Attempting to load BIOS image from PROM (!!) NOUVEAU(0): ... BIOS signature not found (II) NOUVEAU(0): Attempting to load BIOS image from PRAMIN (II) NOUVEAU(0): ... appears to be valid (II) NOUVEAU(0): BIT BIOS found (II) NOUVEAU(0): Bios version 62.79.40.00 (--) NOUVEAU(0): Parsing VBIOS init table 0 at offset 0xD814 (EE) NOUVEAU(0): ========== unknown reg 0x00020060 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00020060 ========== (EE) NOUVEAU(0): ========== unknown reg 0x0000C054 ========== (EE) NOUVEAU(0): ========== unknown reg 0x002FF0A8 ========== (EE) NOUVEAU(0): ========== unknown reg 0x002FF0A8 ========== (EE) NOUVEAU(0): ========== unknown reg 0x002FF0A0 ========== (EE) NOUVEAU(0): ========== unknown reg 0x002FF0A0 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00614100 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00614900 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00614100 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00614900 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00009220 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00009200 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00009210 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00614004 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00610184 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00610184 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00619F00 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00021218 ========== (EE) NOUVEAU(0): ========== unknown reg 0x0061A068 ========== (EE) NOUVEAU(0): ========== unknown reg 0x0061A868 ========== (EE) NOUVEAU(0): ========== unknown reg 0x0061B068 ========== (EE) NOUVEAU(0): ========== unknown reg 0x0000E824 ========== (EE) NOUVEAU(0): ========== unknown reg 0x0000E824 ========== (EE) NOUVEAU(0): ========== unknown reg 0x0000E4F8 ========== (EE) NOUVEAU(0): ========== unknown reg 0x0000E548 ========== (EE) NOUVEAU(0): ========== unknown reg 0x0000E598 ========== (EE) NOUVEAU(0): ========== unknown reg 0x0000E5E8 ========== (EE) NOUVEAU(0): ========== unknown reg 0x0000E500 ========== (EE) NOUVEAU(0): ========== unknown reg 0x0000E550 ========== (EE) NOUVEAU(0): ========== unknown reg 0x0000E5A0 ========== (EE) NOUVEAU(0): ========== unknown reg 0x0000E5F0 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00102018 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00102018 ========== (EE) NOUVEAU(0): ========== unknown reg 0x0000C054 ========== (EE) NOUVEAU(0): ========== unknown reg 0x0000C054 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00020080 ========== (EE) NOUVEAU(0): ========== unknown reg 0x002FF090 ========== (EE) NOUVEAU(0): ========== unknown reg 0x002FF090 ========== (EE) NOUVEAU(0): ========== unknown reg 0x002FF090 ========== (--) NOUVEAU(0): Parsing VBIOS init table 1 at offset 0xDAC8 (--) NOUVEAU(0): Parsing VBIOS init table 2 at offset 0xDACA (EE) NOUVEAU(0): ========== unknown reg 0x0000E200 ========== (--) NOUVEAU(0): Parsing VBIOS init table 3 at offset 0xDBAF (EE) NOUVEAU(0): ========== unknown reg 0x00614120 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00614120 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00614920 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00614920 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00614100 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00614900 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00612000 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00614000 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00614110 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00614114 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00614118 ========== (EE) NOUVEAU(0): ========== unknown reg 0x0061411C ========== (EE) NOUVEAU(0): ========== unknown reg 0x0061A008 ========== (EE) NOUVEAU(0): ========== unknown reg 0x0061C080 ========== (EE) NOUVEAU(0): ========== unknown reg 0x0061C084 ========== (EE) NOUVEAU(0): ========== unknown reg 0x00020010 ========== (EE) NOUVEAU(0): ========== unknown reg 0x0002000C ========== (--) NOUVEAU(0): Parsing VBIOS init table 4 at offset 0xDC74 (EE) NOUVEAU(0): ========== unknown reg 0x00616404 ========== (II) NOUVEAU(0): LVDS clock seems to be 0 KHz. (II) NOUVEAU(0): Found 3 modes, this is not useful (II) NOUVEAU(0): Ignoring FP table (WW) NOUVEAU(0): TMDS table revision 2.0 not currently supported (II) NOUVEAU(0): Found Display Configuration Block version 4.0 (!!) NOUVEAU(0): Raw DCB entry 0: 01000123 00010014 (WW) NOUVEAU(0): G80+ LVDS not initialized by driver; ignoring conf bits (!!) NOUVEAU(0): Raw DCB entry 1: 02021232 00000010 (!!) NOUVEAU(0): Raw DCB entry 2: 02021286 0f220010 (WW) NOUVEAU(0): DCB I2C table has port type 6 (!!) NOUVEAU(0): Raw DCB entry 3: 0000000e 00000000 (II) NOUVEAU(0): Calling LVDS script 1: (II) NOUVEAU(0): NV50DispPreInit is called. (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (--) NOUVEAU(0): DCB entry 0: type: 3, i2c_index: 2, heads: 1, bus: 0, or: 1 (II) NOUVEAU(0): I2C bus "LVDS-0" initialized. (II) NOUVEAU(0): SOR-0 attached with index 0 to LVDS-0 (--) NOUVEAU(0): DCB entry 1: type: 2, i2c_index: 3, heads: 2, bus: 2, or: 2 (II) NOUVEAU(0): I2C bus "DVI-2" initialized. (II) NOUVEAU(0): SOR-1 attached with index 0 to DVI-2 (--) NOUVEAU(0): DCB entry 2: type: 6, i2c_index: 8, heads: 2, bus: 2, or: 2 (WW) NOUVEAU(0): DCB type 6 not known (II) NOUVEAU(0): Output LVDS-0 using monitor section Configured Monitor (II) NOUVEAU(0): Output DVI-2 has no monitor section (II) NOUVEAU(0): nv50_output_detect is called. (II) NOUVEAU(0): NV50ConnectorDDCDetect is called. (II) NOUVEAU(0): I2C device "LVDS-0:ddc2" registered at address 0xA0. (II) NOUVEAU(0): Detected a Digital output on LVDS-0 (II) NOUVEAU(0): Found a suitable output, index 0 (II) NOUVEAU(0): nv50_output_detect is called. (II) NOUVEAU(0): NV50ConnectorDDCDetect is called. (II) NOUVEAU(0): EDID vendor "APP", prod id 40073 (II) NOUVEAU(0): Printing DDC gathered Modelines: (II) NOUVEAU(0): Modeline "1280x800"x0.0 72.50 1280 1328 1360 1423 800 803 809 846 -hsync -vsync (50.9 kHz) (II) NOUVEAU(0): NV50ConnectorGetDDCModes is called. (II) NOUVEAU(0): EDID vendor "APP", prod id 40073 (II) NOUVEAU(0): LVDS-0: preferred mode is 1280x800 (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_detect is called. (II) NOUVEAU(0): NV50ConnectorDDCDetect is called. (II) NOUVEAU(0): I2C device "DVI-2:ddc2" registered at address 0xA0. (II) NOUVEAU(0): I2C device "DVI-2:ddc2" removed. (II) NOUVEAU(0): Output LVDS-0 connected (II) NOUVEAU(0): Output DVI-2 disconnected (II) NOUVEAU(0): Using exact sizes for initial modes (II) NOUVEAU(0): Output LVDS-0 using initial mode 1280x800 (--) NOUVEAU(0): VideoRAM: 262144 kBytes (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0) (--) NOUVEAU(0): Virtual size is 1280x1280 (pitch 1280) (**) NOUVEAU(0): Driver mode "1280x800": 72.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 60.2 Hz (II) NOUVEAU(0): Modeline "1280x800"x60.2 72.50 1280 1328 1360 1423 800 803 809 846 -hsync -vsync (50.9 kHz) (**) NOUVEAU(0): Default mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz (II) NOUVEAU(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz) (**) NOUVEAU(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (**) NOUVEAU(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (**) NOUVEAU(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (**) NOUVEAU(0): Default mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (**) NOUVEAU(0): Default mode "800x600": 56.3 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz (II) NOUVEAU(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz) (**) NOUVEAU(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (**) NOUVEAU(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (**) NOUVEAU(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (**) NOUVEAU(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (**) NOUVEAU(0): Default mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz (II) NOUVEAU(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz) (**) NOUVEAU(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (**) NOUVEAU(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (**) NOUVEAU(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (**) NOUVEAU(0): Default mode "720x400": 35.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.0 Hz (II) NOUVEAU(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz) (**) NOUVEAU(0): Default mode "640x400": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.1 Hz (II) NOUVEAU(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz) (**) NOUVEAU(0): Default mode "640x350": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.1 Hz (II) NOUVEAU(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz) (**) NOUVEAU(0): Display dimensions: (290, 180) mm (**) NOUVEAU(0): DPI set to (112, 180) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/lib/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.5.2, module version = 2.4.0 ABI class: X.Org Video Driver, version 4.1 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: Searching for BusID pci:0000:02:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: drmOpenMinor returns 10 drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0 (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) NOUVEAU(0): [drm] Using the DRM lock SAREA also for drawables. (II) NOUVEAU(0): [drm] framebuffer handle = 0xc0000000 (II) NOUVEAU(0): [drm] added 1 reserved context for kernel (II) NOUVEAU(0): X context handle = 0x1 (II) NOUVEAU(0): [drm] installed DRM signal handler (EE) NOUVEAU(0): Failed to allocate memory for framebuffer! Fatal server error: AddScreen/ScreenInit failed for driver 0