(II) config/hal: initialized
X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-19-server i686 Ubuntu
Current Operating System: Linux skedge 2.6.27-7-generic #1 SMP Tue Nov 4 19:33:20 UTC 2008 i686
Build Date: 24 October 2008  08:00:16AM
xorg-server 2:1.5.2-2ubuntu3 (buildd@rothera.buildd) 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec  2 21:40:09 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Generic Monitor"
(**) |   |-->Device "Silicon Motion, Inc. SM720 Lynx3DM"
(==) Automatically adding devices
(==) Automatically enabling devices
(++) FontPath set to:
	/usr/share/fonts/X11/misc/
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d9a40
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 4.1
	X.Org XInput driver : 2.1
	X.Org Server Extension : 1.1
	X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0@0:2:0) unknown vendor (0x126f) unknown chipset (0x0720) rev 193, Mem @ 0x14000000/0
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"

(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.5.2, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"

(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "siliconmotion"

(II) Loading /usr/lib/xorg/modules/drivers//siliconmotion_drv.so
(II) Module siliconmotion: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.6.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 4.1
> SMI_Identify
(II) SMI: driver (version 1.6.1) for Silicon Motion Lynx chipsets: Lynx,
	LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM, Cougar3DR, MSOC
< SMI_Identify
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for siliconmotion
> SMI_Probe
(**) Chipset override: lynx3dm
(**) Chipset Lynx3DM found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
< SMI_Probe
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
> SMI_PreInit
 > SMI_GetRec
 < SMI_GetRec
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"

(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 0.1.0
	ABI class: X.Org Video Driver, version 4.1
(==) SMI(0): Depth 24, (==) framebuffer bpp 32
(==) SMI(0): RGB weight 888
(==) SMI(0): Default visual is TrueColor
(**) SMI(0): Option "UseBIOS" "off"
(==) SMI(0): PCI Burst enabled
(==) SMI(0): PCI Retry enabled
(==) SMI(0): Using Hardware Cursor
(**) SMI(0): Option: UseBIOS disabled.
(**) SMI(0): Chipset: "lynx3dm"
	SMI_PreInit vgaCRIndex=4, vgaIOBase=0, MMIOBase=(nil)
(==) SMI(0): Dual head disabled
(==) SMI(0): Using XAA acceleration architecture
(II) SMI(0): Physical MMIO at 0x14000000
(II) SMI(0): Logical MMIO at 0xb77b1000 - 0xb79b0fff
(II) SMI(0): DPR=0xb77b1000, VPR=0xb77b1800, IOBase=0xb7871000
(II) SMI(0): DataPort=0xb78b1000 - 0xb79b0fff
(--) SMI(0): videoram: 8192kB
 > SMI_MapMem
  > SMI_EnableMmio
  < SMI_EnableMmio
(II) SMI(0): Physical frame buffer at 0x14000000 offset: 0x00200000
(II) SMI(0): Logical frame buffer at 0xb6fb1000 - 0xb77b0fff
(II) SMI(0): Cursor Offset: 007FFC00
(II) SMI(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) SMI(0): Reserved: 007FF800
 < SMI_MapMem
(II) SMI(0): TFT Panel Size = 1024x768
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) SMI(0): I2C bus "I2C bus" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(==) SMI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) SMI(0): MCLK = 100.227
 > SMI_CrtcPreInit
 < SMI_CrtcPreInit
 > SMILynx_CrtcPreInit
 < SMILynx_CrtcPreInit
 > SMI_OutputPreInit
 < SMI_OutputPreInit
 > SMILynx_OutputPreInit
(II) SMI(0): Output LVDS using monitor section Generic Monitor
 < SMILynx_OutputPreInit
 > SMI_OutputDetect_lcd
 < SMI_OutputDetect_lcd
 > SMI_OutputGetModes_native
 < SMI_OutputGetModes_native
 > SMI_OutputModeValid
 < SMI_OutputModeValid
 > SMI_OutputModeValid
 < SMI_OutputModeValid
 > SMI_OutputModeValid
 < SMI_OutputModeValid
 > SMI_OutputModeValid
 < SMI_OutputModeValid
 > SMI_OutputModeValid
 < SMI_OutputModeValid
 > SMI_OutputModeValid
 < SMI_OutputModeValid
(II) SMI(0): Output LVDS connected
(II) SMI(0): Using user preference for initial modes
(II) SMI(0): Output LVDS using initial mode 1024x768
 > SMI_UnmapMem
  > SMI_DisableMmio
  < SMI_DisableMmio
 < SMI_UnmapMem
(==) SMI(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"

(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.2.0
	ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
< SMI_PreInit
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
> SMI_ScreenInit
 > SMI_MapMem
(II) SMI(0): Physical MMIO at 0x14000000
(II) SMI(0): Logical MMIO at 0xb7737000 - 0xb7936fff
(II) SMI(0): DPR=0xb7737000, VPR=0xb7737800, IOBase=0xb77f7000
(II) SMI(0): DataPort=0xb7837000 - 0xb7936fff
  > SMI_EnableMmio
  < SMI_EnableMmio
(II) SMI(0): Physical frame buffer at 0x14000000 offset: 0x00200000
(II) SMI(0): Logical frame buffer at 0xb6f37000 - 0xb7736fff
(II) SMI(0): Cursor Offset: 007FFC00
(II) SMI(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) SMI(0): Reserved: 007FF800
 < SMI_MapMem
 > SMILynx_Save
(II) SMI(0): Saved current video mode.  Register dump:
  > SMI_PrintRegs
(II) SMI(0): START register dump ------------------
MISCELLANEOUS OUTPUT
    67

SEQUENCER
    x0 x1 x2 x3  x4 x5 x6 x7  x8 x9 xA xB  xC xD xE xF
00| 03 00 03 00  02 28 28 28  28 28 28 28  28 28 28 28 
10| 0B 00 00 00  00 08 10 00  51 00 00 00  00 0F 0F 00 
20| 84 30 0D 00  31 00 00 00  00 00 00 00  00 00 00 00 
30| 28 03 21 89  40 28 28 28  28 28 28 28  00 00 03 FF 
40| 00 FC 00 00  20 F0 00 FC  20 3C 44 20  00 00 00 28 
50| 06 68 A7 7F  83 25 FF 02  03 03 85 28  28 00 00 28 
60| 00 00 FF 1A  1A 00 03 00  54 04 0E 02  52 89 12 82 
70| 84 CD 3A 0C  04 00 3F 28  28 28 00 00  00 00 00 00 
80| 80 00 00 60  12 04 42 28  00 00 00 00  18 03 28 28 
90| 00 00 00 00  28 28 28 28  28 28 28 28  28 28 28 28 
A0| 00 00 00 00  00 ED ED ED  00 00 00 00  00 00 00 00 

CRT CONTROLLER
    x0 x1 x2 x3  x4 x5 x6 x7  x8 x9 xA xB  xC xD xE xF
00| 5F 4F 50 02  53 81 BF 1F  00 4F 0D 0E  00 00 01 3F 
10| 9C 0E 8F 28  1F 96 B9 A3  FF FF FF FF  FF FF FF FF 
30| 00 00 00 40  00 80 02 10  00 00 08 40  00 20 00 00 
40| 82 60 00 65  12 24 FF 00  02 08 A7 E0  4F 8F FF FF 
90| 55 D5 5D DD  86 17 8E AA  8A A3 DE AB  FF FF 1F 00 
A0| 02 02 02 15  15 02 05 05  27 18 31 0E  00 00 

GRAPHICS CONTROLLER
    x0 x1 x2 x3  x4 x5 x6 x7  x8 x9 xA xB  xC xD xE xF
00| 00 00 00 00  00 10 0E 00  FF 

ATTRIBUTE 0CONTROLLER
    x0 x1 x2 x3  x4 x5 x6 x7  x8 x9 xA xB  xC xD xE xF
00| 00 01 02 03  04 05 14 07  38 39 3A 3B  3C 3D 3E 3F 
10| 0C 00 0F 08  00 

DPR    x0       x4       x8       xC
00| C008C000 F000C000 F400C300 00000000
10| F000F000 FF000000 FF000000 8040F000
20| FF000000 FF040000 00000000 F000C040
30| F000F000 FFFFF000 FFFFC000 F000F000
40| FFF00000 FFF00000

VPR    x0       x4       x8       xC
00| 00020000 00000000 00000000 00000000
10| 00A200A0 00000000 00000000 00000020
20| 00000000 00000000 00000000 00000000
30| 00000000 00000000 00000000 00000000
40| 00000000 00000000 00000000 00000000
50| 00000000 01026534 00000542 00EDEDED
60| 0000003D

CPR    x0       x4       x8       xC
00| 02000008 00000000 00000400 00000200
10| 00004D00 00000000 00000006

(II) SMI(0): END register dump --------------------
  < SMI_PrintRegs
 < SMILynx_Save
	Initializing FB @ 0xB6F37000 for 1024x1024 (1024)
 > SMI_HWInit
 < SMI_HWInit
 > SMILynx_HWInit
 < SMILynx_HWInit
(II) SMI(0): FrameBuffer Box: 0,0 - 1024,2047
 > SMI_XAAInit
  > SMI_EngineReset
DPR10 = 04000400
DPR1C = 00250000
DPR24 = FFFFFFFF
DPR28 = FFFFFFFF
DPR3C = 04000400
DPR40 = 00000000
DPR44 = 00000000
   > SMI_DisableClipping
DPR2C = 00000000
DPR30 = 04000400
   < SMI_DisableClipping
  < SMI_EngineReset
(II) SMI(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	8x8 color pattern filled rectangles
	CPU to Screen color expansion
	Solid Horizontal and Vertical Lines
	Setting up tile and stipple cache:
		28 128x128 slots
		7 256x256 slots
		32 8x8 color pattern slots
 < SMI_XAAInit
 > SMILynx_OutputDPMS_lcd
 < SMILynx_OutputDPMS_lcd
 > SMI_CrtcDPMS
 < SMI_CrtcDPMS
 > SMI_CrtcLock
 < SMI_CrtcLock
 > SMI_OutputModeFixup
 < SMI_OutputModeFixup
 > SMI_CrtcModeFixup
 < SMI_CrtcModeFixup
 > SMI_OutputPrepare
 < SMI_OutputPrepare
 > SMI_CrtcPrepare
 < SMI_CrtcPrepare
 > SMILynx_CrtcModeSet_vga
  > SMILynx_CrtcVideoInit_crt
VPR00 = 00030000
VPR10 = 02000200
  < SMILynx_CrtcVideoInit_crt
  > SMILynx_CrtcAdjustFrame
VPR0C = 00000000
  < SMILynx_CrtcAdjustFrame
Clock parameters for 65.004537 MHz: m=227, n1=50, n2=0
 < SMILynx_CrtcModeSet_vga
 > SMI_OutputModeSet
 < SMI_OutputModeSet
 > SMI_CrtcCommit
 < SMI_CrtcCommit
 > SMI_OutputCommit
  > SMILynx_OutputDPMS_lcd
  < SMILynx_OutputDPMS_lcd
 < SMI_OutputCommit
 > SMI_PrintRegs
(II) SMI(0): START register dump ------------------
MISCELLANEOUS OUTPUT
    EF

SEQUENCER
    x0 x1 x2 x3  x4 x5 x6 x7  x8 x9 xA xB  xC xD xE xF
00| 03 01 0F 00  0E 28 28 28  28 28 28 28  28 28 28 28 
10| 0B 00 00 00  00 08 10 20  51 00 00 00  00 0F 0F 00 
20| 14 B0 3D 00  30 00 00 00  00 00 00 00  00 00 00 00 
30| 28 01 24 89  C0 28 28 28  28 28 28 28  00 00 03 FF 
40| 00 FC 00 00  20 F0 00 FC  20 3C 44 20  00 00 00 28 
50| 06 68 A7 7F  83 25 FF 02  03 03 85 28  28 00 00 28 
60| 00 00 FF 1A  1A 00 07 00  54 04 0E 02  E3 32 12 82 
70| 84 CD 3A 0C  04 00 3F 28  28 28 00 00  00 00 00 00 
80| 80 00 00 60  12 04 42 28  00 00 00 00  18 03 28 28 
90| 00 00 00 00  28 28 28 28  28 28 28 28  28 28 28 28 
A0| 00 00 00 00  00 ED ED ED  00 00 00 00  00 00 00 00 

CRT CONTROLLER
    x0 x1 x2 x3  x4 x5 x6 x7  x8 x9 xA xB  xC xD xE xF
00| A3 7F 7F 06  83 94 24 F5  00 60 00 00  00 00 00 00 
10| 03 29 FF 40  00 FF 24 C3  FF FF FF FF  FF FF FF FF 
30| 00 00 00 00  00 80 02 10  00 00 00 40  00 20 00 00 
40| A3 7F 00 85  16 24 FF 00  02 08 E5 E0  7F FF FF FF 
90| 55 D5 5D DD  86 17 8E AA  8A A3 DE AB  FF FF 18 00 
A0| 02 02 02 15  15 02 05 05  27 18 31 0E  00 00 

GRAPHICS CONTROLLER
    x0 x1 x2 x3  x4 x5 x6 x7  x8 x9 xA xB  xC xD xE xF
00| 00 00 00 00  00 40 05 0F  FF 

ATTRIBUTE 0CONTROLLER
    x0 x1 x2 x3  x4 x5 x6 x7  x8 x9 xA xB  xC xD xE xF
00| 00 01 02 03  04 05 06 07  08 09 0A 0B  0C 0D 0E 0F 
10| 41 00 0F 00  00 

DPR    x0       x4       x8       xC
00| C008C000 F000C000 F400C300 00000000
10| F400F400 FF000000 FF000000 8065F000
20| FF000000 FFFFFFFF FFFFFFFF F000C000
30| F400F400 FFFFF000 FFFFC000 F400F400
40| FFF00000 FFF00000

VPR    x0       x4       x8       xC
00| 00030000 00000000 00000000 00000000
10| 02000200 00000000 00000000 00000020
20| 00000000 00000000 00000000 00000000
30| 00000000 00000000 00000000 00000000
40| 00000000 00000000 00000000 00000000
50| 00000000 01026534 00000542 00EDEDED
60| 00000141

CPR    x0       x4       x8       xC
00| 02000008 00000000 00000400 00000200
10| 00004D00 00000000 00000006

(II) SMI(0): END register dump --------------------
 < SMI_PrintRegs
 > SMI_LoadPalette
  > SMILynx_CrtcLoadLUT_crt
  < SMILynx_CrtcLoadLUT_crt
 < SMI_LoadPalette
(II) SMI(0): DPMS enabled
 > SMI_InitVideo
numAdaptors=0
  > SMI_SetupVideo
   > SMI_BuildEncodings
    > SMI_AddEncoding
    < SMI_AddEncoding
    > SMI_AddEncoding
    < SMI_AddEncoding
    > SMI_AddEncoding
    < SMI_AddEncoding
    > SMI_AddEncoding
    < SMI_AddEncoding
    > SMI_AddEncoding
    < SMI_AddEncoding
    > SMI_AddEncoding
    < SMI_AddEncoding
    > SMI_AddEncoding
    < SMI_AddEncoding
    > SMI_AddEncoding
    < SMI_AddEncoding
    > SMI_AddEncoding
    < SMI_AddEncoding
    > SMI_AddEncoding
    < SMI_AddEncoding
    > SMI_AddEncoding
    < SMI_AddEncoding
    > SMI_AddEncoding
    < SMI_AddEncoding
    > SMI_AddEncoding
    < SMI_AddEncoding
    > SMI_AddEncoding
    < SMI_AddEncoding
    > SMI_AddEncoding
    < SMI_AddEncoding
    > SMI_AddEncoding
    < SMI_AddEncoding
    > SMI_AddEncoding
    < SMI_AddEncoding
    > SMI_AddEncoding
    < SMI_AddEncoding
   < SMI_BuildEncodings
(II) SMI(0): I2C device "I2C bus:SAA 7111A" registered at address 0x48.
(II) SMI(0): I2C device "I2C bus:SAA 7111A" removed.
   > SMI_ResetVideo
VPR5C = 00EDEDED
VPR04 = 0000001F
VPR08 = 00000000
VPR5C = 00EDEDED
   < SMI_ResetVideo
  < SMI_SetupVideo
newAdaptor=0x98a2070
  > SMI_InitOffscreenImages
  < SMI_InitOffscreenImages
ScreenInit 1
 < SMI_InitVideo
(II) SMI(0): RandR 1.2 enabled, ignore the following RandR disabled message.
 > SMI_OutputCreateResources
 < SMI_OutputCreateResources
< SMI_ScreenInit
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) SMI(0): Setting screen physical size to 270 x 203
> SMI_CrtcConfigResize
 > SMILynx_CrtcVideoInit_crt
VPR00 = 00030000
VPR10 = 02000200
 < SMILynx_CrtcVideoInit_crt
 > SMILynx_CrtcAdjustFrame
VPR0C = 00000000
 < SMILynx_CrtcAdjustFrame
< SMI_CrtcConfigResize
> SMI_SetupForMono8x8PatternFill
patx=77DDBBEE paty=77DDBBEE fg=00000000 bg=00FFFFFF rop=03
DPR14 = 00000000
DPR18 = 00FFFFFF
DPR34 = 77DDBBEE
DPR38 = 77DDBBEE
< SMI_SetupForMono8x8PatternFill
> SMI_SubsequentMono8x8PatternFillRect
x=0 y=0 w=1024 h=768
DPR04 = 00000000
DPR08 = 04000300
DPR0C = 800000F0
< SMI_SubsequentMono8x8PatternFillRect
> SMILynx_CrtcLoadCursorImage_crt
< SMILynx_CrtcLoadCursorImage_crt
> SMILynx_CrtcSetCursorColors_crt
< SMILynx_CrtcSetCursorColors_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcShowCursor_crt
< SMILynx_CrtcShowCursor_crt
> SMI_SaveScreen
 > SMILynx_DisplayPowerManagementSet
 < SMILynx_DisplayPowerManagementSet
< SMI_SaveScreen
(II) config/hal: no driver specified for device /org/freedesktop/Hal/devices/computer_logicaldev_input_1
(II) config/hal: no driver specified for device /org/freedesktop/Hal/devices/computer_logicaldev_input_0
(II) config/hal: no driver specified for device /org/freedesktop/Hal/devices/computer_logicaldev_input
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"

(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 2.0.99
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.1
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: no driver specified for device /org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"

(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 0.15.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.1
(II) Synaptics touchpad driver version 0.15.2
	Option "_source" "server/hal"
	Option "path" "/dev/input/event6"
	Option "device" "/dev/input/event6"
	Option "driver" "synaptics"
	Option "name" "SynPS/2 Synaptics TouchPad"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(**) Option "Device" "/dev/input/event6"
port opened successfully
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(**) Option "Device" "/dev/input/event6"
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(WW) config/hal: no driver or path specified for /org/freedesktop/Hal/devices/pnp_WACf004
> SMILynx_CrtcHideCursor_crt
< SMILynx_CrtcHideCursor_crt
> SMI_AccelSync
< SMI_AccelSync
> SMI_LeaveVT
 > SMI_AccelSync
 < SMI_AccelSync
 > SMILynx_WriteMode
DPR10 = F000F000
DPR1C = 8040F000
DPR20 = FF000000
DPR24 = FF040000
DPR28 = 00000000
DPR2C = F000C040
DPR30 = F000F000
DPR3C = F000F000
DPR40 = FFF00000
DPR44 = FFF00000
VPR00 = 00020000
VPR0C = 00000000
VPR10 = 00A200A0
CPR00 = 02000008
(II) SMI(0): Done restoring mode.  Register dump:
  > SMI_PrintRegs
(II) SMI(0): START register dump ------------------
MISCELLANEOUS OUTPUT
    67

SEQUENCER
    x0 x1 x2 x3  x4 x5 x6 x7  x8 x9 xA xB  xC xD xE xF
00| 03 00 03 00  02 28 28 28  28 28 28 28  28 28 28 28 
10| 0B 00 00 00  00 08 10 00  51 00 20 00  00 0F 0F 00 
20| 14 B0 3D 00  30 00 00 00  00 00 00 00  00 00 00 00 
30| 28 01 21 89  C0 28 28 28  28 28 28 28  00 00 03 FF 
40| 00 FC 00 00  20 F0 00 FC  20 3C 44 20  00 00 00 28 
50| 06 68 A7 7F  83 25 FF 02  03 03 85 28  28 00 00 28 
60| 00 00 FF 1A  1A 00 03 00  54 04 0E 02  52 89 12 82 
70| 84 CD 3F 0C  04 00 3F 28  28 28 00 00  00 00 00 00 
80| FF 00 00 60  12 04 42 28  F9 01 79 01  00 FF 28 28 
90| 00 00 00 00  28 28 28 28  28 28 28 28  28 28 28 28 
A0| 00 00 00 00  00 ED ED ED  00 00 00 00  00 00 00 00 

CRT CONTROLLER
    x0 x1 x2 x3  x4 x5 x6 x7  x8 x9 xA xB  xC xD xE xF
00| 5F 4F 50 02  53 81 BF 1F  00 4F 0D 0E  00 00 01 3F 
10| 9C 0E 8F 28  1F 96 B9 A3  FF FF FF FF  FF FF FF FF 
30| 00 00 00 40  00 80 02 10  00 00 08 40  00 20 00 00 
40| 82 60 00 65  12 24 FF 00  02 08 A7 E0  4F 8F FF FF 
90| 55 D5 5D DD  86 17 8E AA  8A A3 DE AB  FF FF 1F 00 
A0| 02 02 02 15  15 02 05 05  27 18 31 0E  00 00 

GRAPHICS CONTROLLER
    x0 x1 x2 x3  x4 x5 x6 x7  x8 x9 xA xB  xC xD xE xF
00| 00 00 00 00  00 10 0E 00  FF 

ATTRIBUTE 0CONTROLLER
    x0 x1 x2 x3  x4 x5 x6 x7  x8 x9 xA xB  xC xD xE xF
00| 00 01 02 03  04 05 14 07  38 39 3A 3B  3C 3D 3E 3F 
10| 0C 00 0F 08  00 

DPR    x0       x4       x8       xC
00| C008C000 F000C000 F400C300 000000F0
10| F000F000 FF000000 FFFFFFFF 8040F000
20| FF000000 FF040000 00000000 F000C040
30| F000F000 77DDBBEE 77DDBBEE F000F000
40| FFF00000 FFF00000

VPR    x0       x4       x8       xC
00| 00020000 0000001F 00000000 00000000
10| 00A200A0 00000000 00000000 00000020
20| 00000000 00000000 00000000 00000000
30| 00000000 00000000 00000000 00000000
40| 00000000 00000000 00000000 00000000
50| 00000000 01026534 00000542 00EDEDED
60| 00000042

CPR    x0       x4       x8       xC
00| 02000008 00000000 00000400 00000200
10| 00004D00 00000000 00000006

(II) SMI(0): END register dump --------------------
  < SMI_PrintRegs
 < SMILynx_WriteMode
 > SMI_UnmapMem
  > SMI_DisableMmio
  < SMI_DisableMmio
 < SMI_UnmapMem
< SMI_LeaveVT
(II) Open ACPI successful (/var/run/acpid.socket)
> SMI_EnterVT
 > SMI_MapMem
(II) SMI(0): Physical MMIO at 0x14000000
(II) SMI(0): Logical MMIO at 0xb7737000 - 0xb7936fff
(II) SMI(0): DPR=0xb7737000, VPR=0xb7737800, IOBase=0xb77f7000
(II) SMI(0): DataPort=0xb7837000 - 0xb7936fff
  > SMI_EnableMmio
  < SMI_EnableMmio
(II) SMI(0): Physical frame buffer at 0x14000000 offset: 0x00200000
(II) SMI(0): Logical frame buffer at 0xb6f37000 - 0xb7736fff
(II) SMI(0): Cursor Offset: 007FFC00
(II) SMI(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) SMI(0): Reserved: 007FF800
 < SMI_MapMem
 > SMILynx_Save
(II) SMI(0): Saved current video mode.  Register dump:
  > SMI_PrintRegs
(II) SMI(0): START register dump ------------------
MISCELLANEOUS OUTPUT
    67

SEQUENCER
    x0 x1 x2 x3  x4 x5 x6 x7  x8 x9 xA xB  xC xD xE xF
00| 03 00 03 00  02 28 28 28  28 28 28 28  28 28 28 28 
10| 0B 00 00 00  00 08 10 00  51 00 00 00  00 0F 0F 00 
20| 14 30 3D 00  30 00 00 00  00 00 00 00  00 00 00 00 
30| 28 01 21 89  C0 28 28 28  28 28 28 28  00 00 03 FF 
40| 00 FC 00 00  20 F0 00 FC  20 3C 44 20  00 00 00 28 
50| 06 68 A7 7F  83 25 FF 02  03 03 85 28  28 00 00 28 
60| 00 00 FF 1A  1A 00 03 00  54 04 0E 02  52 89 12 82 
70| 84 CD 3F 0C  04 00 3F 28  28 28 00 00  00 00 00 00 
80| FF 00 00 60  12 04 42 28  F9 01 79 01  00 FF 28 28 
90| 00 00 00 00  28 28 28 28  28 28 28 28  28 28 28 28 
A0| 00 00 00 00  00 ED ED ED  00 00 00 00  00 00 00 00 

CRT CONTROLLER
    x0 x1 x2 x3  x4 x5 x6 x7  x8 x9 xA xB  xC xD xE xF
00| 5F 4F 50 02  53 81 BF 1F  00 4F 1F 1E  00 00 01 02 
10| 9C 0E 8F 28  1F 96 B9 A3  FF FF FF FF  FF FF FF FF 
30| 00 00 00 40  00 80 02 10  00 00 08 40  00 20 00 00 
40| 82 60 00 65  12 24 FF 00  02 08 A7 E0  4F 8F FF FF 
90| 55 D5 5D DD  86 17 8E AA  8A A3 DE AB  FF FF 1F 00 
A0| 02 02 02 15  15 02 05 05  27 18 31 0E  00 00 

GRAPHICS CONTROLLER
    x0 x1 x2 x3  x4 x5 x6 x7  x8 x9 xA xB  xC xD xE xF
00| 00 00 00 00  00 10 0E 00  FF 

ATTRIBUTE 0CONTROLLER
    x0 x1 x2 x3  x4 x5 x6 x7  x8 x9 xA xB  xC xD xE xF
00| 00 01 02 03  04 05 14 07  38 39 3A 3B  3C 3D 3E 3F 
10| 0C 00 0F 08  00 

DPR    x0       x4       x8       xC
00| C008C000 F000C000 F400C300 000000F0
10| F000F000 FF000000 FFFFFFFF 8040F000
20| FF000000 FF040000 00000000 F000C040
30| F000F000 77DDBBEE 77DDBBEE F000F000
40| FFF00000 FFF00000

VPR    x0       x4       x8       xC
00| 00020000 0000001F 00000000 00000000
10| 00A200A0 00000000 00000000 00000020
20| 00000000 00000000 00000000 00000000
30| 00000000 00000000 00000000 00000000
40| 00000000 00000000 00000000 00000000
50| 00000000 01026534 00000542 00EDEDED
60| 000001A2

CPR    x0       x4       x8       xC
00| 02000008 00000000 00000400 00000200
10| 00004D00 00000000 00000006

(II) SMI(0): END register dump --------------------
  < SMI_PrintRegs
 < SMILynx_Save
 > SMI_HWInit
 < SMI_HWInit
 > SMILynx_HWInit
 < SMILynx_HWInit
 > SMILynx_OutputDPMS_lcd
 < SMILynx_OutputDPMS_lcd
 > SMI_CrtcDPMS
 < SMI_CrtcDPMS
 > SMI_CrtcLock
 < SMI_CrtcLock
 > SMI_OutputModeFixup
 < SMI_OutputModeFixup
 > SMI_CrtcModeFixup
 < SMI_CrtcModeFixup
 > SMI_OutputPrepare
 < SMI_OutputPrepare
 > SMI_CrtcPrepare
 < SMI_CrtcPrepare
 > SMILynx_CrtcModeSet_vga
  > SMILynx_CrtcVideoInit_crt
VPR00 = 00030000
VPR10 = 02000200
  < SMILynx_CrtcVideoInit_crt
  > SMILynx_CrtcAdjustFrame
VPR0C = 00000000
  < SMILynx_CrtcAdjustFrame
Clock parameters for 65.004537 MHz: m=227, n1=50, n2=0
 < SMILynx_CrtcModeSet_vga
 > SMI_OutputModeSet
 < SMI_OutputModeSet
 > SMI_CrtcCommit
 < SMI_CrtcCommit
 > SMI_OutputCommit
  > SMILynx_OutputDPMS_lcd
  < SMILynx_OutputDPMS_lcd
 < SMI_OutputCommit
 > SMI_EngineReset
DPR10 = 04000400
DPR1C = 00250000
DPR24 = FFFFFFFF
DPR28 = FFFFFFFF
DPR3C = 04000400
DPR40 = 00000000
DPR44 = 00000000
  > SMI_DisableClipping
DPR2C = 00000000
DPR30 = 04000400
  < SMI_DisableClipping
 < SMI_EngineReset
< SMI_EnterVT
> SMI_LoadPalette
 > SMILynx_CrtcLoadLUT_crt
 < SMILynx_CrtcLoadLUT_crt
< SMI_LoadPalette
> SMI_SetupForMono8x8PatternFill
patx=77DDBBEE paty=77DDBBEE fg=00000000 bg=00FFFFFF rop=03
DPR14 = 00000000
DPR18 = 00FFFFFF
DPR34 = 77DDBBEE
DPR38 = 77DDBBEE
< SMI_SetupForMono8x8PatternFill
> SMI_SubsequentMono8x8PatternFillRect
x=0 y=0 w=1024 h=768
DPR04 = 00000000
DPR08 = 04000300
DPR0C = 800000F0
< SMI_SubsequentMono8x8PatternFillRect
> SMILynx_CrtcLoadCursorImage_crt
< SMILynx_CrtcLoadCursorImage_crt
> SMILynx_CrtcSetCursorColors_crt
< SMILynx_CrtcSetCursorColors_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcShowCursor_crt
< SMILynx_CrtcShowCursor_crt
> SMI_SaveScreen
 > SMILynx_DisplayPowerManagementSet
 < SMILynx_DisplayPowerManagementSet
< SMI_SaveScreen
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(**) Option "Device" "/dev/input/event6"
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) Macintosh mouse button emulation: Device reopened after 10 attempts.
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) AT Translated Set 2 keyboard: Device reopened after 10 attempts.
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
> SMILynx_CrtcSetCursorPosition_crt
< SMILynx_CrtcSetCursorPosition_crt
