This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.6.99.1 Release Date: (unreleased) X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.27.7-132.fc10.x86_64 x86_64 Current Operating System: Linux mercury.localdomain 2.6.28-rc7 #4 SMP Sun Dec 7 18:51:20 EST 2008 x86_64 Build Date: 04 December 2008 07:31:12PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.1.log", Time: Sun Dec 7 21:01:20 2008 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "single head configuration" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "" (**) | |-->Device "Videocard0" (==) No monitor specified for screen "Screen0". Using a default monitor configuration. (**) |-->Input Device "Keyboard0" (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (==) FontPath set to: built-ins (==) ModulePath set to "/usr/lib64/xorg/modules" (II) Cannot locate a core pointer device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. (WW) Disabling Keyboard0 (II) Loader magic: 0xb20 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (--) using VT number 7 (--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xfea00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff8/8 (--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xfeb00000/1048576 (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.99.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.99.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.99.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (==) Exporting typical set of GLX visuals (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.99.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib64/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.99.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/lib64/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.6.99.1, module version = 2.6.99 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib64/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.99.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (**) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (**) intel(0): Option "AccelMethod" "uxa" (**) intel(0): Option "Tiling" "No" (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM (--) intel(0): Chipset: "965GM" (--) intel(0): Linear framebuffer at 0xE0000000 (--) intel(0): IO registers at addr 0xFEA00000 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (**) intel(0): Using UXA for acceleration (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA has no monitor section (II) intel(0): Output LVDS has no monitor section (II) intel(0): I2C bus "LVDSDDC_C" initialized. (II) intel(0): Attempting to determine panel fixed mode. (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): I2C bus "SDVOB DDC Bus" initialized. (II) intel(0): Output TMDS-1 has no monitor section (II) intel(0): SDVOB: device VID/DID: 04:AA.03, clock range 25.0MHz - 165.0MHz (II) intel(0): SDVOB: 1 input channel (II) intel(0): SDVOB: TMDS0 output reported (II) intel(0): Output TV has no monitor section (II) intel(0): Current clock rate multiplier: 1 (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): Output VGA disconnected (II) intel(0): Output LVDS connected (II) intel(0): Output TMDS-1 disconnected (II) intel(0): Output TV disconnected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS using initial mode 1920x1200 (II) intel(0): detected 512 kB GTT. (II) intel(0): detected 7676 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Will not try to enable page flipping (==) intel(0): Triple buffering disabled (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.99.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009 (WW) intel(0): PP_STATUS before: on, ready, sequencing idle (WW) intel(0): PP_STATUS after: on, ready, sequencing on (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 1135360 total, 1 used (II) intel(0): I830CheckAvailableMemory: 4541436 kB available drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: drmOpenMinor returns 11 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) intel(0): [DRI2] Setup complete (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling disabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with untiled buffers. (II) intel(0): Untiled allocation successful. (II) intel(0): Page Flipping disabled (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): Current clock rate multiplier: 1 (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x00000fff: power context (4 kB) (II) intel(0): 0x0077f000: end of stolen memory (II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x0077f000: start of memory manager (II) intel(0): 0x007a0000-0x015affff: front buffer (14400 kB) (II) intel(0): 0x0079f000-0x0079ffff: overlay registers (4 kB) (II) intel(0): 0x017a0000-0x017aefff: exa G965 state buffer (60 kB) (II) intel(0): 0x017b0000-0x017b7fff: logical 3D context (32 kB) (II) intel(0): 0x017b8000-0x017c1fff: HW cursors (40 kB) (II) intel(0): 0x10000000: end of memory manager (WW) intel(0): ESR is 0x00000001 (WW) intel(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled (WW) intel(0): Existing errors found in hardware state. (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane A is now disabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output TMDS-1 is connected to pipe none (II) intel(0): Output TV is connected to pipe none (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): DPMS enabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: DRI2 Enabled (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Screen 0 is not DRI capable (II) AIGLX: Loaded and initialized /usr/lib64/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) intel(0): Setting screen physical size to 331 x 207 (EE) intel(0): underrun on pipe B! (II) config/hal: Adding input device Video Bus (II) LoadModule: "evdev" (II) Loading /usr/lib64/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.99.1, module version = 2.1.99 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event6" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Video Bus: xkb_rules: "evdev" (**) Option "xkb_model" "pc105+inet" (**) Video Bus: xkb_model: "pc105+inet" (**) Option "xkb_layout" "us" (**) Video Bus: xkb_layout: "us" (II) config/hal: Adding input device Power Button (CM) (**) Power Button (CM): always reports core events (**) Power Button (CM): Device: "/dev/input/event1" (II) Power Button (CM): Found keys (II) Power Button (CM): Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button (CM)" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Power Button (CM): xkb_rules: "evdev" (**) Option "xkb_model" "pc105+inet" (**) Power Button (CM): xkb_model: "pc105+inet" (**) Option "xkb_layout" "us" (**) Power Button (CM): xkb_layout: "us" (II) config/hal: Adding input device AT Translated Set 2 keyboard (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) AT Translated Set 2 keyboard: xkb_rules: "evdev" (**) Option "xkb_model" "pc105+inet" (**) AT Translated Set 2 keyboard: xkb_model: "pc105+inet" (**) Option "xkb_layout" "us" (**) AT Translated Set 2 keyboard: xkb_layout: "us" (II) config/hal: Adding input device Video Bus (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event7" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Video Bus: xkb_rules: "evdev" (**) Option "xkb_model" "pc105+inet" (**) Video Bus: xkb_model: "pc105+inet" (**) Option "xkb_layout" "us" (**) Video Bus: xkb_layout: "us" (II) config/hal: Adding input device Sleep Button (CM) (**) Sleep Button (CM): always reports core events (**) Sleep Button (CM): Device: "/dev/input/event2" (II) Sleep Button (CM): Found keys (II) Sleep Button (CM): Configuring as keyboard (II) XINPUT: Adding extended input device "Sleep Button (CM)" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Sleep Button (CM): xkb_rules: "evdev" (**) Option "xkb_model" "pc105+inet" (**) Sleep Button (CM): xkb_model: "pc105+inet" (**) Option "xkb_layout" "us" (**) Sleep Button (CM): xkb_layout: "us" (II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint (II) LoadModule: "synaptics" (II) Loading /usr/lib64/xorg/modules/input//synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.6.99.1, module version = 0.15.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) Synaptics touchpad driver version 0.15.2 (**) Option "Device" "/dev/input/event5" (II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (II) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127 (II) AlpsPS/2 ALPS GlidePoint: finger width range 0 - 0 (II) AlpsPS/2 ALPS GlidePoint: buttons: left right middle (**) Option "SHMConfig" "true" (--) AlpsPS/2 ALPS GlidePoint touchpad found (**) AlpsPS/2 ALPS GlidePoint: always reports core events (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD) (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1 (**) AlpsPS/2 ALPS GlidePoint: (accel) filter chain progression: 2.00 (**) AlpsPS/2 ALPS GlidePoint: (accel) filter stage 0: 20.00 ms (**) AlpsPS/2 ALPS GlidePoint: (accel) set acceleration profile 0 (--) AlpsPS/2 ALPS GlidePoint touchpad found (II) config/hal: Adding input device PS/2 Mouse (**) PS/2 Mouse: always reports core events (**) PS/2 Mouse: Device: "/dev/input/event4" (II) PS/2 Mouse: Found 3 mouse buttons (II) PS/2 Mouse: Found x and y relative axes (II) PS/2 Mouse: Configuring as mouse (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5 (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE) (**) PS/2 Mouse: (accel) keeping acceleration scheme 1 (**) PS/2 Mouse: (accel) filter chain progression: 2.00 (**) PS/2 Mouse: (accel) filter stage 0: 20.00 ms (**) PS/2 Mouse: (accel) set acceleration profile 0 AUDIT: Sun Dec 7 21:01:24 2008: 10232: client 1 rejected from local host ( uid=500 gid=500 pid=10263 ) AUDIT: Sun Dec 7 21:01:24 2008: 10232: client 2 rejected from local host ( uid=500 gid=500 pid=10265 ) (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 2020 2052 2264 1200 1202 1208 1235 -hsync -vsync (74.1 kHz) (II) intel(0): EDID vendor "SEC", prod id 12885 (EE) intel(0): underrun on pipe B! (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 2020 2052 2264 1200 1202 1208 1235 -hsync -vsync (74.1 kHz) (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 2020 2052 2264 1200 1202 1208 1235 -hsync -vsync (74.1 kHz) (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 2020 2052 2264 1200 1202 1208 1235 -hsync -vsync (74.1 kHz) (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 2020 2052 2264 1200 1202 1208 1235 -hsync -vsync (74.1 kHz) (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 2020 2052 2264 1200 1202 1208 1235 -hsync -vsync (74.1 kHz) (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 2020 2052 2264 1200 1202 1208 1235 -hsync -vsync (74.1 kHz) (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 2020 2052 2264 1200 1202 1208 1235 -hsync -vsync (74.1 kHz) (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 2020 2052 2264 1200 1202 1208 1235 -hsync -vsync (74.1 kHz) (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 2020 2052 2264 1200 1202 1208 1235 -hsync -vsync (74.1 kHz) (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 2020 2052 2264 1200 1202 1208 1235 -hsync -vsync (74.1 kHz) (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): EDID vendor "SEC", prod id 12885 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 2020 2052 2264 1200 1202 1208 1235 -hsync -vsync (74.1 kHz) (II) intel(0): EDID vendor "SEC", prod id 12885 (WW) Video Bus: Couldn't reset key repeat (Bad file descriptor) (WW) Power Button (CM): Couldn't reset key repeat (Bad file descriptor) (WW) AT Translated Set 2 keyboard: Couldn't reset key repeat (Bad file descriptor) (WW) Video Bus: Couldn't reset key repeat (Bad file descriptor) (WW) Sleep Button (CM): Couldn't reset key repeat (Bad file descriptor) (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x00000fff: power context (4 kB) (II) intel(0): 0x0077f000: end of stolen memory (II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x0077f000: start of memory manager (II) intel(0): 0x007a0000-0x015affff: front buffer (14400 kB) (II) intel(0): 0x0079f000-0x0079ffff: overlay registers (4 kB) (II) intel(0): 0x017a0000-0x017aefff: exa G965 state buffer (60 kB) (II) intel(0): 0x017b0000-0x017b7fff: logical 3D context (32 kB) (II) intel(0): 0x017b8000-0x017c1fff: HW cursors (40 kB) (II) intel(0): 0x10000000: end of memory manager (WW) intel(0): ESR is 0x00000001 (WW) intel(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled (WW) intel(0): Existing errors found in hardware state. (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane A is now disabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output TMDS-1 is connected to pipe none (II) intel(0): Output TV is connected to pipe none (--) AlpsPS/2 ALPS GlidePoint touchpad found (II) Video Bus: Device reopened after 1 attempts. (II) Power Button (CM): Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Sleep Button (CM): Device reopened after 1 attempts. (II) PS/2 Mouse: Device reopened after 1 attempts. (WW) Video Bus: Couldn't reset key repeat (Bad file descriptor) (WW) Power Button (CM): Couldn't reset key repeat (Bad file descriptor) (WW) AT Translated Set 2 keyboard: Couldn't reset key repeat (Bad file descriptor) (WW) Video Bus: Couldn't reset key repeat (Bad file descriptor) (WW) Sleep Button (CM): Couldn't reset key repeat (Bad file descriptor) (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x00000fff: power context (4 kB) (II) intel(0): 0x0077f000: end of stolen memory (II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x0077f000: start of memory manager (II) intel(0): 0x007a0000-0x015affff: front buffer (14400 kB) (II) intel(0): 0x0079f000-0x0079ffff: overlay registers (4 kB) (II) intel(0): 0x017a0000-0x017aefff: exa G965 state buffer (60 kB) (II) intel(0): 0x017b0000-0x017b7fff: logical 3D context (32 kB) (II) intel(0): 0x017b8000-0x017c1fff: HW cursors (40 kB) (II) intel(0): 0x10000000: end of memory manager (WW) intel(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled (WW) intel(0): Existing errors found in hardware state. (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane A is now disabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output TMDS-1 is connected to pipe none (II) intel(0): Output TV is connected to pipe none (--) AlpsPS/2 ALPS GlidePoint touchpad found (II) Video Bus: Device reopened after 1 attempts. (II) Power Button (CM): Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Sleep Button (CM): Device reopened after 1 attempts. (II) PS/2 Mouse: Device reopened after 1 attempts. (WW) Video Bus: Couldn't reset key repeat (Bad file descriptor) (WW) Power Button (CM): Couldn't reset key repeat (Bad file descriptor) (WW) AT Translated Set 2 keyboard: Couldn't reset key repeat (Bad file descriptor) (WW) Video Bus: Couldn't reset key repeat (Bad file descriptor) (WW) Sleep Button (CM): Couldn't reset key repeat (Bad file descriptor) (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x00000fff: power context (4 kB) (II) intel(0): 0x0077f000: end of stolen memory (II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x0077f000: start of memory manager (II) intel(0): 0x007a0000-0x015affff: front buffer (14400 kB) (II) intel(0): 0x0079f000-0x0079ffff: overlay registers (4 kB) (II) intel(0): 0x017a0000-0x017aefff: exa G965 state buffer (60 kB) (II) intel(0): 0x017b0000-0x017b7fff: logical 3D context (32 kB) (II) intel(0): 0x017b8000-0x017c1fff: HW cursors (40 kB) (II) intel(0): 0x10000000: end of memory manager (WW) intel(0): ESR is 0x00000001 (WW) intel(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled (WW) intel(0): Existing errors found in hardware state. (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane A is now disabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output TMDS-1 is connected to pipe none (II) intel(0): Output TV is connected to pipe none (--) AlpsPS/2 ALPS GlidePoint touchpad found (II) Video Bus: Device reopened after 1 attempts. (II) Power Button (CM): Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Sleep Button (CM): Device reopened after 1 attempts. (II) PS/2 Mouse: Device reopened after 1 attempts. (WW) Video Bus: Couldn't reset key repeat (Bad file descriptor) (WW) Power Button (CM): Couldn't reset key repeat (Bad file descriptor) (WW) AT Translated Set 2 keyboard: Couldn't reset key repeat (Bad file descriptor) (WW) Video Bus: Couldn't reset key repeat (Bad file descriptor) (WW) Sleep Button (CM): Couldn't reset key repeat (Bad file descriptor) (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x00000fff: power context (4 kB) (II) intel(0): 0x0077f000: end of stolen memory (II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x0077f000: start of memory manager (II) intel(0): 0x007a0000-0x015affff: front buffer (14400 kB) (II) intel(0): 0x0079f000-0x0079ffff: overlay registers (4 kB) (II) intel(0): 0x017a0000-0x017aefff: exa G965 state buffer (60 kB) (II) intel(0): 0x017b0000-0x017b7fff: logical 3D context (32 kB) (II) intel(0): 0x017b8000-0x017c1fff: HW cursors (40 kB) (II) intel(0): 0x10000000: end of memory manager (WW) intel(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled (WW) intel(0): Existing errors found in hardware state. (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane A is now disabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output TMDS-1 is connected to pipe none (II) intel(0): Output TV is connected to pipe none (--) AlpsPS/2 ALPS GlidePoint touchpad found (II) Video Bus: Device reopened after 1 attempts. (II) Power Button (CM): Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Sleep Button (CM): Device reopened after 1 attempts. (II) PS/2 Mouse: Device reopened after 1 attempts. (WW) Video Bus: Couldn't reset key repeat (Bad file descriptor) (WW) Power Button (CM): Couldn't reset key repeat (Bad file descriptor) (WW) AT Translated Set 2 keyboard: Couldn't reset key repeat (Bad file descriptor) (WW) Video Bus: Couldn't reset key repeat (Bad file descriptor) (WW) Sleep Button (CM): Couldn't reset key repeat (Bad file descriptor) (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x00000fff: power context (4 kB) (II) intel(0): 0x0077f000: end of stolen memory (II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x0077f000: start of memory manager (II) intel(0): 0x007a0000-0x015affff: front buffer (14400 kB) (II) intel(0): 0x0079f000-0x0079ffff: overlay registers (4 kB) (II) intel(0): 0x017a0000-0x017aefff: exa G965 state buffer (60 kB) (II) intel(0): 0x017b0000-0x017b7fff: logical 3D context (32 kB) (II) intel(0): 0x017b8000-0x017c1fff: HW cursors (40 kB) (II) intel(0): 0x10000000: end of memory manager (WW) intel(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled (WW) intel(0): Existing errors found in hardware state. (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane A is now disabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output TMDS-1 is connected to pipe none (II) intel(0): Output TV is connected to pipe none (--) AlpsPS/2 ALPS GlidePoint touchpad found (II) Video Bus: Device reopened after 1 attempts. (II) Power Button (CM): Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Sleep Button (CM): Device reopened after 1 attempts. (II) PS/2 Mouse: Device reopened after 1 attempts.