BIOS EBDA/lowmem at: 0009f000/0009f000 Linux version 2.6.28-rc6 (root@x-915gm) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Dec 2 12:38:29 CST 2008 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000004f6e0000 (usable) BIOS-e820: 000000004f6e0000 - 000000004f6f5000 (ACPI data) BIOS-e820: 000000004f6f5000 - 000000004f700000 (ACPI NVS) BIOS-e820: 000000004f700000 - 0000000050000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x4f6e0 max_arch_pfn = 0x100000 kernel direct mapping tables up to 373fe000 @ 7000-d000 RAMDISK: 37d30000 - 37fef160 Allocated new RAMDISK: 00100000 - 003bf160 Move RAMDISK from 0000000037d30000 - 0000000037fef15f to 00100000 - 003bf15f ACPI: RSDP 000F6BA0, 0024 (r2 IBM ) ACPI: XSDT 4F6E739B, 005C (r1 IBM TP-70 1240 LTP 0) ACPI: FACP 4F6E7400, 00F4 (r3 IBM TP-70 1240 IBM 1) ACPI Warning (tbfadt-0460): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080926] ACPI: DSDT 4F6E75E7, D75F (r1 IBM TP-70 1240 MSFT 100000E) ACPI: FACS 4F6F6000, 0040 ACPI: SSDT 4F6E75B4, 0033 (r1 IBM TP-70 1240 MSFT 100000E) ACPI: ECDT 4F6F4D46, 0052 (r1 IBM TP-70 1240 IBM 1) ACPI: TCPA 4F6F4D98, 0032 (r1 IBM TP-70 1240 PTL 1) ACPI: APIC 4F6F4DCA, 005A (r1 IBM TP-70 1240 IBM 1) ACPI: MCFG 4F6F4E24, 003E (r1 IBM TP-70 1240 IBM 1) ACPI: BOOT 4F6F4FD8, 0028 (r1 IBM TP-70 1240 LTP 1) ACPI: Local APIC address 0xfee00000 386MB HIGHMEM available. 883MB LOWMEM available. mapped low ram: 0 - 373fe000 low ram: 00000000 - 373fe000 bootmap 00009000 - 0000fe80 (9 early reservations) ==> bootmem [0000000000 - 00373fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 00008e38c0] TEXT DATA BSS ==> [0000400000 - 00008e38c0] #4 [00008e4000 - 00008e8000] INIT_PG_TABLE ==> [00008e4000 - 00008e8000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #7 [0000100000 - 00003bf160] NEW RAMDISK ==> [0000100000 - 00003bf160] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000373fe HighMem 0x000373fe -> 0x0004f6e0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0004f6e0 On node 0 totalpages: 325247 free_area_init_node: node 0, pgdat c0793c00, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1736 pages used for memmap Normal zone: 220470 pages, LIFO batch:31 HighMem zone: 774 pages used for memmap HighMem zone: 98268 pages, LIFO batch:31 Movable zone: 0 pages used for memmap Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 1 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 PM: Registered nosave memory: 00000000000d0000 - 00000000000d4000 PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 60000000 (gap: 50000000:90000000) PERCPU: Allocating 40960 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 322705 Kernel command line: ro root=LABEL=/1 rhgb reboot=b Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0845000 soft=c0825000 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 1729.344 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1281120k/1301376k available (2275k kernel code, 18972k reserved, 1624k data, 308k init, 396168k highmem) virtual kernel memory layout: fixmap : 0xffc58000 - 0xfffff000 (3740 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) .init : 0xc07d5000 - 0xc0822000 ( 308 kB) .data : 0xc0638cd0 - 0xc07cee1c (1624 kB) .text : 0xc0400000 - 0xc0638cd0 (2275 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.68 BogoMIPS (lpj=1729344) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 19k freed ACPI: Core revision 20080926 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08 Brought up 1 CPUs Total of 1 processors activated (3458.68 BogoMIPS). CPU0 attaching NULL sched-domain. net_namespace: 776 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: EC: EC description table is found, configuring boot EC ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: ACPI Dock Station Driver: 3 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 32bit mmio: [0x90080000-0x900fffff] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807] pci 0000:00:02.0: reg 18 32bit mmio: [0xb0000000-0xbfffffff] pci 0000:00:02.0: reg 1c 32bit mmio: [0x90000000-0x9003ffff] pci 0000:00:02.1: reg 10 32bit mmio: [0x000000-0x07ffff] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f] pci 0000:00:1d.7: reg 10 32bit mmio: [0x90040000-0x900403ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.2: reg 10 io port: [0x1c00-0x1cff] pci 0000:00:1e.2: reg 14 io port: [0x18c0-0x18ff] pci 0000:00:1e.2: reg 18 32bit mmio: [0x90040800-0x900409ff] pci 0000:00:1e.2: reg 1c 32bit mmio: [0x90040400-0x900404ff] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold pci 0000:00:1e.2: PME# disabled pci 0000:00:1e.3: reg 10 io port: [0x2400-0x24ff] pci 0000:00:1e.3: reg 14 io port: [0x2000-0x207f] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold pci 0000:00:1e.3: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] pci 0000:00:1f.2: reg 20 io port: [0x1810-0x181f] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf] pci 0000:02:00.0: reg 10 64bit mmio: [0x90100000-0x9010ffff] pci 0000:02:00.0: PME# supported from D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.0: bridge 32bit mmio: [0x90100000-0x901fffff] pci 0000:00:1c.2: bridge io port: [0x3000-0x3fff] pci 0000:00:1c.2: bridge 32bit mmio: [0x90200000-0x902fffff] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xc0000000-0xc00fffff] pci 0000:04:00.0: reg 10 32bit mmio: [0x90304000-0x90304fff] pci 0000:04:00.0: supports D1 D2 pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:04:00.1: reg 10 32bit mmio: [0x90305000-0x903057ff] pci 0000:04:00.1: reg 14 32bit mmio: [0x90300000-0x90303fff] pci 0000:04:00.1: supports D1 D2 pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot pci 0000:04:00.1: PME# disabled pci 0000:04:02.0: reg 10 32bit mmio: [0x90306000-0x90306fff] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold pci 0000:04:02.0: PME# disabled pci 0000:04:03.0: supports D1 D2 pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x4000-0x8fff] pci 0000:00:1e.0: bridge 32bit mmio: [0x90300000-0xa00fffff] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xc8000000-0xcfffffff] pci 0000:0b:01.0: reg 10 io port: [0x8020-0x8027] pci 0000:0b:01.0: reg 14 io port: [0x8014-0x8017] pci 0000:0b:01.0: reg 18 io port: [0x8018-0x801f] pci 0000:0b:01.0: reg 1c io port: [0x8010-0x8013] pci 0000:0b:01.0: reg 20 io port: [0x8000-0x800f] pci 0000:0b:01.0: supports D1 D2 pci 0000:0b:02.0: reg 10 32bit mmio: [0xa0000000-0xa0000fff] pci 0000:0b:02.0: supports D1 D2 pci 0000:0b:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0b:02.0: PME# disabled pci 0000:0b:02.1: reg 10 32bit mmio: [0xa0001000-0xa0001fff] pci 0000:0b:02.1: supports D1 D2 pci 0000:0b:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0b:02.1: PME# disabled pci 0000:04:03.0: transparent bridge pci 0000:04:03.0: bridge io port: [0x00-0xfff] pci 0000:04:03.0: bridge 32bit mmio: [0x000000-0x0fffff] pci 0000:04:03.0: bridge 32bit mmio pref: [0x000000-0x0fffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.DOCK._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: Power Resource [PUBS] (on) SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing pci 0000:04:03.0: BAR 7: can't allocate resource pci 0000:04:03.0: BAR 8: can't allocate resource pci 0000:04:03.0: BAR 9: can't allocate resource Expanded resource reserved due to conflict with Adapter ROM NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff could not be reserved system 00:00: iomem range 0xc4000-0xc7fff could not be reserved system 00:00: iomem range 0xc8000-0xcbfff has been reserved system 00:00: iomem range 0xcc000-0xcffff could not be reserved system 00:00: iomem range 0xd0000-0xd3fff could not be reserved system 00:00: iomem range 0xdc000-0xdffff could not be reserved system 00:00: iomem range 0xe0000-0xe3fff could not be reserved system 00:00: iomem range 0xe4000-0xe7fff could not be reserved system 00:00: iomem range 0xe8000-0xebfff could not be reserved system 00:00: iomem range 0xec000-0xeffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x4fffffff could not be reserved system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved system 00:02: ioport range 0x1000-0x107f has been reserved system 00:02: ioport range 0x1180-0x11bf has been reserved system 00:02: ioport range 0x15e0-0x15ef has been reserved system 00:02: ioport range 0x1600-0x1641 has been reserved system 00:02: ioport range 0x1644-0x167f has been reserved system 00:02: iomem range 0xe0000000-0xefffffff has been reserved system 00:02: iomem range 0xf0008000-0xf000bfff has been reserved system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: 0x90100000-0x901fffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.2: IO window: 0x3000-0x3fff pci 0000:00:1c.2: MEM window: 0x90200000-0x902fffff pci 0000:00:1c.2: PREFETCH window: 0x000000c0000000-0x000000c00fffff pci 0000:04:00.0: CardBus bridge, secondary bus 0000:12 pci 0000:04:00.0: IO window: 0x005000-0x0050ff pci 0000:04:00.0: IO window: 0x005400-0x0054ff pci 0000:04:00.0: PREFETCH window: 0xc8000000-0xcbffffff pci 0000:04:00.0: MEM window: 0x94000000-0x97ffffff pci 0000:0b:02.0: CardBus bridge, secondary bus 0000:0c pci 0000:0b:02.0: IO window: 0x004000-0x0040ff pci 0000:0b:02.0: IO window: 0x004400-0x0044ff pci 0000:0b:02.0: PREFETCH window: 0x64000000-0x67ffffff pci 0000:0b:02.0: MEM window: 0x98000000-0x9bffffff pci 0000:0b:02.1: CardBus bridge, secondary bus 0000:10 pci 0000:0b:02.1: IO window: 0x004800-0x0048ff pci 0000:0b:02.1: IO window: 0x004c00-0x004cff pci 0000:0b:02.1: PREFETCH window: 0x68000000-0x6bffffff pci 0000:0b:02.1: MEM window: 0x9c000000-0x9fffffff pci 0000:04:03.0: PCI bridge, secondary bus 0000:0b pci 0000:04:03.0: IO window: 0x4000-0x4fff pci 0000:04:03.0: MEM window: 0x98000000-0x9fffffff pci 0000:04:03.0: PREFETCH window: 0x00000064000000-0x0000006bffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1e.0: IO window: 0x4000-0x8fff pci 0000:00:1e.0: MEM window: 0x90300000-0xa00fffff pci 0000:00:1e.0: PREFETCH window: 0x000000c8000000-0x000000cfffffff pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:0b:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 pci 0000:0b:02.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffff] bus: 02 index 0 mmio: [0x0-0x0] bus: 02 index 1 mmio: [0x90100000-0x901fffff] bus: 02 index 2 mmio: [0x0-0x0] bus: 02 index 3 mmio: [0x0-0x0] bus: 03 index 0 io port: [0x3000-0x3fff] bus: 03 index 1 mmio: [0x90200000-0x902fffff] bus: 03 index 2 mmio: [0xc0000000-0xc00fffff] bus: 03 index 3 mmio: [0x0-0x0] bus: 04 index 0 io port: [0x4000-0x8fff] bus: 04 index 1 mmio: [0x90300000-0xa00fffff] bus: 04 index 2 mmio: [0xc8000000-0xcfffffff] bus: 04 index 3 io port: [0x00-0xffff] bus: 04 index 4 mmio: [0x000000-0xffffffff] bus: 12 index 0 io port: [0x5000-0x50ff] bus: 12 index 1 io port: [0x5400-0x54ff] bus: 12 index 2 mmio: [0xc8000000-0xcbffffff] bus: 12 index 3 mmio: [0x94000000-0x97ffffff] bus: 0b index 0 io port: [0x4000-0x4fff] bus: 0b index 1 mmio: [0x98000000-0x9fffffff] bus: 0b index 2 mmio: [0x64000000-0x6bffffff] bus: 0b index 3 io port: [0x4000-0x8fff] bus: 0b index 4 mmio: [0x90300000-0xa00fffff] bus: 0b index 5 mmio: [0xc8000000-0xcfffffff] bus: 0b index 6 io port: [0x00-0xffff] bus: 0b index 7 mmio: [0x000000-0xffffffff] bus: 0c index 0 io port: [0x4000-0x40ff] bus: 0c index 1 io port: [0x4400-0x44ff] bus: 0c index 2 mmio: [0x64000000-0x67ffffff] bus: 0c index 3 mmio: [0x98000000-0x9bffffff] bus: 10 index 0 io port: [0x4800-0x48ff] bus: 10 index 1 io port: [0x4c00-0x4cff] bus: 10 index 2 mmio: [0x68000000-0x6bffffff] bus: 10 index 3 mmio: [0x9c000000-0x9fffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 2812k freed Simple Boot Flag at 0x35 set to 0x1 IBM machine detected. Enabling interrupts during APM calls. apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1228715934.911:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1735 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pcieport-driver 0000:00:1c.0: irq 1279 for MSI/MSI-X pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.2: found MSI capability pcieport-driver 0000:00:1c.2: irq 1278 for MSI/MSI-X pci_express 0000:00:1c.2:pcie00: allocate port service pci_express 0000:00:1c.2:pcie02: allocate port service pci_express 0000:00:1c.2:pcie03: allocate port service pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (57 C) isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 915GM Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000 Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial 00:0a: activated 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A serial 0000:00:1e.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23 serial 0000:00:1e.3: PCI INT B disabled brd: module loaded input: Macintosh mouse button emulation as /class/input/input0 ahci 0000:00:1f.2: version 3.0 ahci: probe of 0000:00:1f.2 failed with error -22 ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 ata1.00: ATA-6: TOSHIBA MK4026GAX RoHS, PA107E, max UDMA/100 ata1.00: 78140160 sectors, multi 16: LBA ata1.00: applying bridge limits ata1.00: configured for UDMA/100 ata2.00: ATAPI: HL-DT-STDVD-ROM GDR-8084N, 1.01, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK4026GA PA10 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8084N 1.01 PQ: 0 ANSI: 5 yenta_cardbus 0000:04:00.0: CardBus bridge found [1014:0560] yenta_cardbus 0000:04:00.0: Using INTVAL to route CSC interrupts to PCI yenta_cardbus 0000:04:00.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:04:00.0: TI: mfunc 0x01d21b22, devctl 0x64 yenta_cardbus 0000:04:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 yenta_cardbus 0000:04:00.0: Socket status: 30000086 pci_bus 0000:04: Raising subordinate bus# of parent bus (#04) from #11 to #15 yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff: clean. yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge Memory window: 0x90300000 - 0xa00fffff yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge Memory window: 0xc8000000 - 0xcfffffff yenta_cardbus 0000:0b:02.0: CardBus bridge found [1014:0148] yenta_cardbus 0000:0b:02.0: Using INTVAL to route CSC interrupts to PCI yenta_cardbus 0000:0b:02.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:0b:02.0: TI: mfunc 0x00001002, devctl 0x66 yenta_cardbus 0000:0b:02.0: ISA IRQ mask 0x0cb8, PCI irq 22 yenta_cardbus 0000:0b:02.0: Socket status: 30000006 yenta_cardbus 0000:0b:02.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x4fff: clean. yenta_cardbus 0000:0b:02.0: pcmcia: parent PCI bridge Memory window: 0x98000000 - 0x9fffffff yenta_cardbus 0000:0b:02.0: pcmcia: parent PCI bridge Memory window: 0x64000000 - 0x6bffffff yenta_cardbus 0000:0b:02.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff yenta_cardbus 0000:0b:02.0: pcmcia: parent PCI bridge Memory window: 0x90300000 - 0xa00fffff yenta_cardbus 0000:0b:02.0: pcmcia: parent PCI bridge Memory window: 0xc8000000 - 0xcfffffff yenta_cardbus 0000:0b:02.1: CardBus bridge found [1014:0148] yenta_cardbus 0000:0b:02.1: Using INTVAL to route CSC interrupts to PCI yenta_cardbus 0000:0b:02.1: Routing CardBus interrupts to PCI yenta_cardbus 0000:0b:02.1: TI: mfunc 0x00001002, devctl 0x66 yenta_cardbus 0000:0b:02.1: ISA IRQ mask 0x0cb8, PCI irq 22 yenta_cardbus 0000:0b:02.1: Socket status: 30000006 yenta_cardbus 0000:0b:02.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff pcmcia_socket pcmcia_socket2: cs: IO port probe 0x4000-0x4fff: clean. yenta_cardbus 0000:0b:02.1: pcmcia: parent PCI bridge Memory window: 0x98000000 - 0x9fffffff yenta_cardbus 0000:0b:02.1: pcmcia: parent PCI bridge Memory window: 0x64000000 - 0x6bffffff yenta_cardbus 0000:0b:02.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff yenta_cardbus 0000:0b:02.1: pcmcia: parent PCI bridge Memory window: 0x90300000 - 0xa00fffff yenta_cardbus 0000:0b:02.1: pcmcia: parent PCI bridge Memory window: 0xc8000000 - 0xcfffffff PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 308k freed Write protecting the kernel text: 2276k Write protecting the kernel read-only data: 1200k Marking TSC unstable due to TSC halts in idle input: AT Translated Set 2 keyboard as /class/input/input1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 19, io mem 0x90040000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<4>Clocksource tsc unstable (delta = -243463707 ns) sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk pata_cmd64x 0000:0b:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 scsi2 : pata_cmd64x scsi3 : pata_cmd64x ata3: PATA max UDMA/66 cmd 0x8020 ctl 0x8014 bmdma 0x8000 irq 21 ata4: PATA max UDMA/66 cmd 0x8018 ctl 0x8010 bmdma 0x8008 irq 21 pata_cmd64x: active 10 recovery 10 setup 3. pata_cmd64x: active 10 recovery 10 setup 3. pata_cmd64x: active 10 recovery 10 setup 3. pata_cmd64x: active 10 recovery 10 setup 3. usb 1-1: new high speed USB device using ehci_hcd and address 2 Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input2 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usb 3-2: new low speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice input: Logitech Logitech USB Optical Mouse as /class/input/input3 generic-usb 0003:046D:C019.0001: input: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:1d.1-2/input0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1228715941.171:2): selinux=0 auid=4294967295 ses=4294967295 IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input4 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 Driver 'sr' needs updating - please use bus_type methods Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. pcmcia_socket pcmcia_socket2: cs: IO port probe 0x100-0x3af: clean. pcmcia_socket pcmcia_socket2: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 pcmcia_socket pcmcia_socket2: cs: IO port probe 0x820-0x8ff: clean. pcmcia_socket pcmcia_socket2: cs: IO port probe 0xc00-0xcf7: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. pcmcia_socket pcmcia_socket2: cs: IO port probe 0xa00-0xaff: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. intel_rng: FWH not detected i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 input: PC Speaker as /class/input/input5 input: Power Button (FF) as /class/input/input6 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input7 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input8 ACPI: Sleep Button (CM) [SLPB] ieee80211_crypt: registered algorithm 'NULL' parport_pc 00:0b: reported by Plug and Play ACPI parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] iTCO_vendor_support: vendor-support=0 tg3.c:v3.94 (August 14, 2008) tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 tg3 0000:02:00.0: setting latency timer to 64 eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:41:52:56:53 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] NET: Registered protocol family 23 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation firewire_ohci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 firewire_ohci: Added fw-ohci device 0000:04:00.1, OHCI version 1.10 ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) nsc-ircc 00:0c: activated nsc-ircc, chip->init nsc-ircc, Found chip at base=0x02e nsc-ircc, driver loaded (Dag Brattli) IrDA: Registered device irda0 nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq ipw2200: Copyright(c) 2003-2006 Intel Corporation ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection ipw2200 0000:04:02.0: firmware: requesting ipw2200-bss.fw thinkpad_acpi: ThinkPad ACPI Extras v0.21 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 70ET64WW (1.24 ), EC 70HT27WW-1.04 thinkpad_acpi: IBM ThinkPad R52, model 185897C Registered led device: tpacpi::thinklight Registered led device: tpacpi::power Registered led device: tpacpi:orange:batt Registered led device: tpacpi:green:batt Registered led device: tpacpi::dock_active Registered led device: tpacpi::bay_active Registered led device: tpacpi::dock_batt Registered led device: tpacpi::unknown_led Registered led device: tpacpi::standby thinkpad_acpi: fan_init: initial fan status is unknown, assuming it is in auto mode input: ThinkPad Extra Buttons as /class/input/input9 firewire_core: created device fw0: GUID 00061b03290719a5, S400 ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels) Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22 Intel ICH 0000:00:1e.2: setting latency timer to 64 AC'97 0 analog subsections not ready intel8x0_measure_ac97_clock: measured 50447 usecs intel8x0: clocking to 48000 Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23 Intel ICH Modem 0000:00:1e.3: setting latency timer to 64 MC'97 1 converters and GPIO not ready (0xff00) device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda4, internal journal Adding 522104k swap on /dev/sda3. Priority:-1 extents:1 across:522104k platform microcode: firmware: requesting intel-ucode/06-0d-08 Microcode Update Driver: v2.00 , Peter Oruba Microcode Update Driver: v2.00 removed. warning: process `kudzu' used the deprecated sysctl system call with 1.23. NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready RPC: Registered udp transport module. RPC: Registered tcp transport module. Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use) eth0: no IPv6 routers present [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: power state changed by ACPI to D0 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20080730 on minor 0 compiz[2749]: segfault at 20 ip 080537ad sp bfb1fd10 error 4 in compiz[8047000+33000] thinkpad_acpi: CMOS NVRAM (7) and EC (6) do not agree on display brightness level