[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-9-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 20 21:57:00 UTC 2008 (Ubuntu 2.6.27-9.19-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fcf0000 (usable) [ 0.000000] BIOS-e820: 000000003fcf0000 - 000000003fcff000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fcff000 - 000000003fd00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fd00000 - 000000003fe80000 (usable) [ 0.000000] BIOS-e820: 000000003fe80000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] last_pfn = 0x3fe80 max_arch_pfn = 0x100000 [ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000 [ 0.000000] RAMDISK: 37821000 - 37fef756 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F66D0, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 3FCF8BF7, 0030 (r1 PTLTD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 3FCFEF14, 0074 (r1 INTEL NBGV 6040000 PTL 3) [ 0.000000] ACPI: DSDT 3FCF8C27, 62ED (r1 INTEL Brkdle_G 6040000 MSFT 100000D) [ 0.000000] ACPI: FACS 3FCFFFC0, 0040 [ 0.000000] ACPI: APIC 3FCFEF88, 0050 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 3FCFEFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 38000000 [ 0.000000] low ram: 00000000 - 38000000 [ 0.000000] bootmap 00008000 - 0000f000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20] [ 0.000000] #4 [0037821000 - 0037fef756] RAMDISK ==> [0037821000 - 0037fef756] [ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000] [ 0.000000] #6 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f6690] 000f6690 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00038000 [ 0.000000] HighMem 0x00038000 -> 0x0003fe80 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fcf0 [ 0.000000] 0: 0x0003fd00 -> 0x0003fe80 [ 0.000000] On node 0 totalpages: 261647 [ 0.000000] free_area_init_node: node 0, pgdat c048a580, node_mem_map c1000000 [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 223300 pages, LIFO batch:31 [ 0.000000] HighMem zone: 32083 pages, LIFO batch:7 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf800000) [ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259346 [ 0.000000] Kernel command line: root=UUID=930bc33a-3745-40af-a119-d5c3067c2d23 ro xforcevesa quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PMTIMER calibration value [ 0.000000] Detected 2192.872 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 1023356k/1047040k available (2572k kernel code, 22976k reserved, 1160k data, 424k init, 129472k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB) [ 0.004000] .data : 0xc038335a - 0xc04a5680 (1160 kB) [ 0.004000] .text : 0xc0100000 - 0xc038335a (2572 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.004022] Calibrating delay loop (skipped), value calculated using timer frequency.. 4385.74 BogoMIPS (lpj=8771488) [ 0.004056] Security Framework initialized [ 0.004075] SELinux: Disabled at boot. [ 0.004116] AppArmor: AppArmor initialized [ 0.004138] Mount-cache hash table entries: 512 [ 0.004463] Initializing cgroup subsys ns [ 0.004473] Initializing cgroup subsys cpuacct [ 0.004477] Initializing cgroup subsys memory [ 0.004505] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.004510] CPU: L2 cache: 512K [ 0.004514] CPU: Hyper-Threading is disabled [ 0.004541] Checking 'hlt' instruction... OK. [ 0.020723] SMP alternatives: switching to UP code [ 0.030958] Freeing SMP alternatives: 11k freed [ 0.030967] ACPI: Core revision 20080609 [ 0.035219] ACPI: Checking initramfs for custom DSDT [ 0.467251] ENABLING IO-APIC IRQs [ 0.467446] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.468029] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.468029] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.468029] ..... (found apic 0 pin 0) ... [ 0.514887] ....... works. [ 0.514890] CPU0: Intel(R) Pentium(R) 4 CPU 2.20GHz stepping 07 [ 0.516031] Brought up 1 CPUs [ 0.516031] Total of 1 processors activated (4385.74 BogoMIPS). [ 0.516031] CPU0 attaching sched-domain: [ 0.516031] domain 0: span 0 level CPU [ 0.516031] groups: 0 [ 0.516031] net_namespace: 840 bytes [ 0.516031] Booting paravirtualized kernel on bare hardware [ 0.516031] Time: 3:32:56 Date: 12/19/08 [ 0.516031] NET: Registered protocol family 16 [ 0.516031] EISA bus registered [ 0.516031] ACPI: bus type pci registered [ 0.516031] PCI: PCI BIOS revision 2.10 entry at 0xfd99a, last bus=2 [ 0.516031] PCI: Using configuration type 1 for base access [ 0.518072] ACPI: EC: Look up EC in DSDT [ 0.526801] ACPI: Interpreter enabled [ 0.526810] ACPI: (supports S0 S1 S3 S4 S5) [ 0.526833] ACPI: Using IOAPIC for interrupt routing [ 0.533348] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.533475] PCI: 0000:00:00.0 reg 10 32bit mmio: [ec000000, efffffff] [ 0.533558] PCI: 0000:00:02.0 reg 10 32bit mmio: [f0000000, f7ffffff] [ 0.533568] PCI: 0000:00:02.0 reg 14 32bit mmio: [e8000000, e807ffff] [ 0.533688] PCI: 0000:00:1d.0 reg 20 io port: [1800, 181f] [ 0.533749] PCI: 0000:00:1d.1 reg 20 io port: [1820, 183f] [ 0.533810] PCI: 0000:00:1d.2 reg 20 io port: [1840, 185f] [ 0.533873] PCI: 0000:00:1d.7 reg 10 32bit mmio: [e8080000, e80803ff] [ 0.533931] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.533938] pci 0000:00:1d.7: PME# disabled [ 0.533983] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, [ 0.533985] * this clock source is slow. If you are sure your timer does not have [ 0.533987] * this bug, please use "acpi_pm_good" to disable the workaround [ 0.534035] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.534045] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 0.534051] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO [ 0.534076] PCI: 0000:00:1f.1 reg 10 io port: [0, 7] [ 0.534085] PCI: 0000:00:1f.1 reg 14 io port: [0, 3] [ 0.534093] PCI: 0000:00:1f.1 reg 18 io port: [0, 7] [ 0.534102] PCI: 0000:00:1f.1 reg 1c io port: [0, 3] [ 0.534111] PCI: 0000:00:1f.1 reg 20 io port: [1860, 186f] [ 0.534119] PCI: 0000:00:1f.1 reg 24 32bit mmio: [0, 3ff] [ 0.534177] PCI: 0000:00:1f.3 reg 20 io port: [1880, 189f] [ 0.534227] PCI: 0000:00:1f.5 reg 10 io port: [1c00, 1cff] [ 0.534237] PCI: 0000:00:1f.5 reg 14 io port: [18c0, 18ff] [ 0.534247] PCI: 0000:00:1f.5 reg 18 32bit mmio: [e8080c00, e8080dff] [ 0.534256] PCI: 0000:00:1f.5 reg 1c 32bit mmio: [e8080800, e80808ff] [ 0.534289] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.534294] pci 0000:00:1f.5: PME# disabled [ 0.534341] PCI: 0000:02:02.0 reg 10 io port: [2000, 20ff] [ 0.534350] PCI: 0000:02:02.0 reg 14 32bit mmio: [e8100000, e81000ff] [ 0.534393] pci 0000:02:02.0: supports D1 [ 0.534395] pci 0000:02:02.0: supports D2 [ 0.534399] pci 0000:02:02.0: PME# supported from D1 D2 D3hot D3cold [ 0.534404] pci 0000:02:02.0: PME# disabled [ 0.534434] PCI: 0000:02:0a.0 reg 10 32bit mmio: [f8000000, f8000fff] [ 0.534492] PCI: 0000:02:0a.1 reg 10 32bit mmio: [f8001000, f8001fff] [ 0.534569] PCI: 0000:02:0b.0 reg 10 32bit mmio: [e8100400, e81004ff] [ 0.534578] PCI: 0000:02:0b.0 reg 14 io port: [2800, 2807] [ 0.534587] PCI: 0000:02:0b.0 reg 18 io port: [2400, 24ff] [ 0.534624] pci 0000:02:0b.0: supports D2 [ 0.534627] pci 0000:02:0b.0: PME# supported from D2 D3hot D3cold [ 0.534633] pci 0000:02:0b.0: PME# disabled [ 0.534663] pci 0000:00:1e.0: transparent bridge [ 0.534669] PCI: bridge 0000:00:1e.0 io port: [2000, 2fff] [ 0.534675] PCI: bridge 0000:00:1e.0 32bit mmio: [e8100000, e81fffff] [ 0.534682] PCI: bridge 0000:00:1e.0 32bit mmio pref: [f8000000, f80fffff] [ 0.534693] bus 00 -> node 0 [ 0.534704] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.535035] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SLOT._PRT] [ 0.538763] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.538940] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 0.539117] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.539297] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.539482] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.539668] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.539856] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 0.540132] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.540472] ACPI: Power Resource [FN01] (on) [ 0.540612] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.540679] pnp: PnP ACPI init [ 0.540697] ACPI: bus type pnp registered [ 0.566389] pnp: PnP ACPI: found 10 devices [ 0.566394] ACPI: ACPI bus type pnp unregistered [ 0.566401] PnPBIOS: Disabled by ACPI PNP [ 0.567044] PCI: Using ACPI for IRQ routing [ 0.567233] NET: Registered protocol family 8 [ 0.567233] NET: Registered protocol family 20 [ 0.567233] NetLabel: Initializing [ 0.567233] NetLabel: domain hash size = 128 [ 0.567233] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.567233] NetLabel: unlabeled traffic allowed by default [ 0.567233] tracer: 772 pages allocated for 65536 entries of 48 bytes [ 0.567233] actual entries 65620 [ 0.568074] AppArmor: AppArmor Filesystem Enabled [ 0.568103] ACPI: RTC can wake from S4 [ 0.568186] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.568192] system 00:01: ioport range 0x1180-0x11bf has been reserved [ 0.568196] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.568200] system 00:01: ioport range 0xfe00-0xfe00 has been reserved [ 0.568205] system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.568210] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.603762] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.603769] pci 0000:00:1e.0: IO window: 0x2000-0x2fff [ 0.603777] pci 0000:00:1e.0: MEM window: 0xe8100000-0xe81fffff [ 0.603783] pci 0000:00:1e.0: PREFETCH window: 0x000000f8000000-0x000000f80fffff [ 0.603805] pci 0000:00:1e.0: setting latency timer to 64 [ 0.603811] bus: 00 index 0 io port: [0, ffff] [ 0.603814] bus: 00 index 1 mmio: [0, ffffffff] [ 0.603818] bus: 02 index 0 io port: [2000, 2fff] [ 0.603821] bus: 02 index 1 mmio: [e8100000, e81fffff] [ 0.603824] bus: 02 index 2 mmio: [f8000000, f80fffff] [ 0.603827] bus: 02 index 3 io port: [0, ffff] [ 0.603829] bus: 02 index 4 mmio: [0, ffffffff] [ 0.603850] NET: Registered protocol family 2 [ 0.604099] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.604655] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.606135] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.607093] TCP: Hash tables configured (established 131072 bind 65536) [ 0.607100] TCP reno registered [ 0.607398] NET: Registered protocol family 1 [ 0.607628] checking if image is initramfs... it is [ 1.104071] Switched to high resolution mode on CPU 0 [ 1.511801] Freeing initrd memory: 7993k freed [ 1.512197] Simple Boot Flag at 0x3b set to 0x1 [ 1.513044] audit: initializing netlink socket (disabled) [ 1.513079] type=2000 audit(1229657576.512:1): initialized [ 1.519524] highmem bounce pool size: 64 pages [ 1.519537] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.523200] VFS: Disk quotas dquot_6.5.1 [ 1.523372] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.523563] msgmni has been set to 1762 [ 1.523774] io scheduler noop registered [ 1.523779] io scheduler anticipatory registered [ 1.523783] io scheduler deadline registered [ 1.523807] io scheduler cfq registered (default) [ 1.523832] pci 0000:00:02.0: Boot video device [ 1.525035] isapnp: Scanning for PnP cards... [ 1.879016] isapnp: No Plug & Play device found [ 1.949317] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.949494] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.950832] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.953929] brd: module loaded [ 1.954065] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.954280] PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1 [ 1.954285] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.954959] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.955772] mice: PS/2 mouse device common for all mice [ 1.956069] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.956098] rtc0: alarms up to one month, y3k [ 1.956322] EISA: Probing bus 0 at eisa.0 [ 1.956333] Cannot allocate resource for EISA slot 1 [ 1.956338] Cannot allocate resource for EISA slot 2 [ 1.956364] EISA: Detected 0 cards. [ 1.956370] cpuidle: using governor ladder [ 1.956373] cpuidle: using governor menu [ 1.957192] TCP cubic registered [ 1.957243] Using IPI No-Shortcut mode [ 1.957704] registered taskstats version 1 [ 1.957879] Magic number: 4:258:513 [ 1.958076] rtc_cmos 00:04: setting system clock to 2008-12-19 03:32:58 UTC (1229657578) [ 1.958081] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.958083] EDD information not available. [ 1.958840] Freeing unused kernel memory: 424k freed [ 1.958913] Write protecting the kernel text: 2576k [ 1.958956] Write protecting the kernel read-only data: 936k [ 1.977794] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 2.274305] fuse init (API version 7.9) [ 2.468066] fan PNP0C0B:00: registered as cooling_device0 [ 2.468078] ACPI: Fan [FAN1] (on) [ 2.528761] processor ACPI0007:00: registered as cooling_device1 [ 2.528769] ACPI: Processor [CPU0] (supports 8 throttling states) [ 2.550308] ACPI Exception (thermal-0377): AE_OK, No or invalid critical threshold [20080609] [ 3.066929] usbcore: registered new interface driver usbfs [ 3.066970] usbcore: registered new interface driver hub [ 3.067471] usbcore: registered new device driver usb [ 3.090284] USB Universal Host Controller Interface driver v3.0 [ 3.090369] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.090383] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.090389] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.090465] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 3.090505] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 [ 3.090784] usb usb1: configuration #1 chosen from 1 choice [ 3.090828] hub 1-0:1.0: USB hub found [ 3.090846] hub 1-0:1.0: 2 ports detected [ 3.192510] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.192526] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.192531] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.192571] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 3.192612] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 [ 3.192777] usb usb2: configuration #1 chosen from 1 choice [ 3.192822] hub 2-0:1.0: USB hub found [ 3.192839] hub 2-0:1.0: 2 ports detected [ 3.296443] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.296460] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.296465] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.296507] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 3.296549] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 3.296723] usb usb3: configuration #1 chosen from 1 choice [ 3.296771] hub 3-0:1.0: USB hub found [ 3.296786] hub 3-0:1.0: 2 ports detected [ 3.361464] No dock devices found. [ 3.437059] SCSI subsystem initialized [ 3.443016] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 3.504593] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 3.504615] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3.504621] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.504666] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 3.508601] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 3.508622] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe8080000 [ 3.524062] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.524370] usb usb4: configuration #1 chosen from 1 choice [ 3.524415] hub 4-0:1.0: USB hub found [ 3.524436] hub 4-0:1.0: 6 ports detected [ 3.538414] libata version 3.00 loaded. [ 3.733958] 8139cp 0000:02:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 3.733966] 8139cp 0000:02:02.0: Try the "8139too" driver instead. [ 3.738742] ata_piix 0000:00:1f.1: version 2.12 [ 3.738762] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 3.738771] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.738852] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 3.739487] scsi0 : ata_piix [ 3.739761] scsi1 : ata_piix [ 3.741550] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14 [ 3.741555] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15 [ 3.741936] 8139too Fast Ethernet driver 0.9.28 [ 3.928523] ata1.00: ATAPI: TOSHIBA ODD-DVD SD-R5272, 1031, max UDMA/33 [ 3.928845] ata1.01: ATA-4: ST320413A, 3.54, max UDMA/100 [ 3.928850] ata1.01: 39102336 sectors, multi 16: LBA [ 3.928867] ata1.01: limited to UDMA/33 due to 40-wire cable [ 3.960482] ata1.00: configured for UDMA/33 [ 3.976433] ata1.01: configured for UDMA/33 [ 4.112108] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 4.140528] ata2.00: ATA-6: SAMSUNG SV4002H, QP100-07, max UDMA/100 [ 4.140534] ata2.00: 78242976 sectors, multi 0: LBA [ 4.140553] ata2.00: limited to UDMA/33 due to 40-wire cable [ 4.156449] ata2.00: configured for UDMA/33 [ 4.162036] scsi 0:0:0:0: CD-ROM TOSHIBA ODD-DVD SD-R5272 1031 PQ: 0 ANSI: 5 [ 4.162307] scsi 0:0:1:0: Direct-Access ATA ST320413A 3.54 PQ: 0 ANSI: 5 [ 4.162499] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SV4002H QP10 PQ: 0 ANSI: 5 [ 4.162672] 8139too 0000:02:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.163519] eth0: RealTek RTL8139 at 0x2000, 00:40:2b:46:1e:9d, IRQ 17 [ 4.163523] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 4.285727] usb 3-1: configuration #1 chosen from 1 choice [ 4.628384] scsi 0:0:0:0: Attached scsi generic sg0 type 5 [ 4.628454] scsi 0:0:1:0: Attached scsi generic sg1 type 0 [ 4.628517] scsi 1:0:0:0: Attached scsi generic sg2 type 0 [ 4.682779] Driver 'sr' needs updating - please use bus_type methods [ 4.691025] Driver 'sd' needs updating - please use bus_type methods [ 4.696120] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 4.696129] Uniform CD-ROM driver Revision: 3.20 [ 4.696302] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 4.701864] sd 0:0:1:0: [sda] 39102336 512-byte hardware sectors (20020 MB) [ 4.701896] sd 0:0:1:0: [sda] Write Protect is off [ 4.701900] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 4.701950] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.702063] sd 0:0:1:0: [sda] 39102336 512-byte hardware sectors (20020 MB) [ 4.702090] sd 0:0:1:0: [sda] Write Protect is off [ 4.702094] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 4.702143] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.702150] sda: sda1 sda2 < sda5 > [ 4.757105] sd 0:0:1:0: [sda] Attached SCSI disk [ 4.757263] sd 1:0:0:0: [sdb] 78242976 512-byte hardware sectors (40060 MB) [ 4.757294] sd 1:0:0:0: [sdb] Write Protect is off [ 4.757299] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.757348] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.757453] sd 1:0:0:0: [sdb] 78242976 512-byte hardware sectors (40060 MB) [ 4.757482] sd 1:0:0:0: [sdb] Write Protect is off [ 4.757486] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.757534] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.757541] sdb:<6>usbcore: registered new interface driver hiddev [ 4.767546] sdb1 sdb2 [ 4.767777] sd 1:0:0:0: [sdb] Attached SCSI disk [ 4.779512] input: Logitech Trackball as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input2 [ 4.780423] input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1d.2-1 [ 4.780460] usbcore: registered new interface driver usbhid [ 4.780466] usbhid: v2.6:USB HID core driver [ 5.512032] PM: Starting manual resume from disk [ 5.512040] PM: Resume from partition 8:5 [ 5.512042] PM: Checking hibernation image. [ 5.512515] PM: Resume from disk failed. [ 5.595933] kjournald starting. Commit interval 5 seconds [ 5.595953] EXT3-fs: mounted filesystem with ordered data mode. [ 15.790901] udevd version 124 started [ 16.644869] Linux agpgart interface v0.103 [ 16.754068] agpgart-intel 0000:00:00.0: Intel 830M Chipset [ 16.754309] agpgart-intel 0000:00:00.0: detected 892K stolen memory [ 16.868366] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 16.924344] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000 [ 16.961054] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.999985] iTCO_vendor_support: vendor-support=0 [ 17.030964] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 17.031121] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware [ 17.031136] iTCO_wdt: No card detected [ 17.088224] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 17.104082] ACPI: Power Button (FF) [PWRF] [ 17.104315] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input4 [ 17.120077] ACPI: Power Button (CM) [PWRB] [ 17.135267] intel_rng: FWH not detected [ 17.537074] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 18.876349] Linux video capture interface: v2.00 [ 18.999813] bttv: driver version 0.9.17 loaded [ 18.999819] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 19.001458] bttv: Bt8xx card found (0). [ 19.001483] bttv 0000:02:0a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 19.001497] bttv0: Bt878 (rev 2) at 0000:02:0a.0, irq: 22, latency: 132, mmio: 0xf8000000 [ 19.001517] bttv0: detected: ATI TV Wonder/VE [card=64], PCI subsystem ID is 1002:0003 [ 19.001522] bttv0: using: ATI TV-Wonder VE [card=64,autodetected] [ 19.001566] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] [ 19.001700] bttv0: tuner type=19 [ 19.001707] bttv0: i2c: checking for TDA9875 @ 0xb0... not found [ 19.002319] bttv0: i2c: checking for TDA7432 @ 0x8a... not found [ 19.393322] All bytes are equal. It is not a TEA5767 [ 19.393445] tuner' 0-0060: chip found @ 0xc0 (bt878 #0 [sw]) [ 19.479408] parport_pc 00:08: reported by Plug and Play ACPI [ 19.479464] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 19.540788] tuner-simple 0-0060: creating new instance [ 19.540794] tuner-simple 0-0060: type set to 19 (Temic PAL* auto (4006 FN5)) [ 19.550978] bttv0: registered device video0 [ 19.551040] bttv0: registered device vbi0 [ 19.551065] bttv0: PLL: 28636363 => 35468950 .. ok [ 20.415389] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 20.415423] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 20.736054] intel8x0_measure_ac97_clock: measured 54776 usecs [ 20.736060] intel8x0: clocking to 48000 [ 23.746319] lp0: using parport0 (interrupt-driven). [ 23.951284] Adding 859436k swap on /dev/sda5. Priority:-1 extents:1 across:859436k [ 24.541821] EXT3 FS on sda1, internal journal [ 25.817072] type=1505 audit(1229675602.240:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=3867 [ 26.073392] type=1505 audit(1229675602.496:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=3872 [ 26.073862] type=1505 audit(1229675602.496:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3872 [ 26.318242] ip_tables: (C) 2000-2006 Netfilter Core Team [ 27.232183] ACPI: WMI: Mapper loaded [ 28.845858] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 29.284700] NET: Registered protocol family 10 [ 29.287526] lo: Disabled Privacy Extensions [ 29.371547] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 29.371557] apm: overridden by ACPI. [ 29.838098] ppdev: user-space parallel port driver [ 32.099553] Bluetooth: Core ver 2.13 [ 32.102727] NET: Registered protocol family 31 [ 32.102737] Bluetooth: HCI device and connection manager initialized [ 32.102743] Bluetooth: HCI socket layer initialized [ 32.191581] Bluetooth: L2CAP ver 2.11 [ 32.191591] Bluetooth: L2CAP socket layer initialized [ 32.233168] Bluetooth: SCO (Voice Link) ver 0.6 [ 32.233177] Bluetooth: SCO socket layer initialized [ 32.268312] Bluetooth: RFCOMM socket layer initialized [ 32.269679] Bluetooth: RFCOMM TTY layer initialized [ 32.269688] Bluetooth: RFCOMM ver 1.10 [ 32.296238] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 32.296249] Bluetooth: BNEP filters: protocol multicast [ 32.422197] Bridge firewalling registered [ 32.424676] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 35.328200] [drm] Initialized drm 1.1.0 20060810 [ 35.347111] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 35.347127] pci 0000:00:02.0: setting latency timer to 64 [ 35.350394] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 36.556823] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 36.946875] NET: Registered protocol family 17 [ 47.400017] eth0: no IPv6 routers present [ 139.044309] ppdev0: registered pardevice [ 139.092755] ppdev0: unregistered pardevice [ 140.286602] ppdev0: registered pardevice [ 140.336292] ppdev0: unregistered pardevice [ 141.516723] ppdev0: registered pardevice [ 141.577701] ppdev0: unregistered pardevice [ 571.388961] PM: Syncing filesystems ... done. [ 571.389883] PM: Preparing system for mem sleep [ 571.391236] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 571.393408] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 571.393548] PM: Entering mem sleep [ 571.393553] Suspending console(s) (use no_console_suspend to debug) [ 571.395005] pci 0000:00:02.0: PCI INT A disabled [ 571.424027] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 571.424216] sd 1:0:0:0: [sdb] Stopping disk [ 571.446340] sd 0:0:1:0: [sda] Synchronizing SCSI cache [ 571.557886] sd 0:0:1:0: [sda] Stopping disk [ 572.035514] parport_pc 00:08: disabled [ 572.037067] serial 00:07: disabled [ 572.037191] bttv 0000:02:0a.0: PCI INT A disabled [ 572.037423] Intel ICH 0000:00:1f.5: PCI INT B disabled [ 572.037709] ata_piix 0000:00:1f.1: PCI INT A disabled [ 572.037813] ehci_hcd 0000:00:1d.7: PCI INT D disabled [ 572.052052] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 572.052087] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 572.052120] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 572.052271] PM: suspend devices took 0.660 seconds [ 572.052392] ACPI: Preparing to enter system sleep state S3 [ 572.352903] Disabling non-boot CPUs ... [ 572.352903] Back to C! [ 572.352903] ACPI: Waking up from system sleep state S3 [ 572.356104] agpgart-intel 0000:00:00.0: restoring config space at offset 0x4 (was 0xe0000008, writing 0xec000008) [ 572.356128] pci 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 572.356147] pci 0000:00:02.0: restoring config space at offset 0x5 (was 0x0, writing 0xe8000000) [ 572.356153] pci 0000:00:02.0: restoring config space at offset 0x4 (was 0x8, writing 0xf0000008) [ 572.356162] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900000, writing 0x900003) [ 572.373878] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 572.373886] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 572.373934] usb usb1: root hub lost power or was reset [ 572.373955] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 572.373961] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 572.374005] usb usb2: root hub lost power or was reset [ 572.374023] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 572.374030] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 572.374074] usb usb3: root hub lost power or was reset [ 572.388032] ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002) [ 572.388038] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 572.388046] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 572.388062] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x461, writing 0x403) [ 572.388089] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900106) [ 572.388112] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x0, writing 0x40000) [ 572.388125] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0xfff0, writing 0xf800f800) [ 572.388131] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xe810e810) [ 572.388138] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x228000f0, writing 0x2802020) [ 572.388144] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20200, writing 0x20020200) [ 572.388156] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x80800005, writing 0x80800107) [ 572.388169] pci 0000:00:1e.0: setting latency timer to 64 [ 572.388204] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) [ 572.388218] ata_piix 0000:00:1f.1: restoring config space at offset 0x9 (was 0x0, writing 0x50000000) [ 572.388233] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800007) [ 572.388245] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 572.388251] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 572.391705] Intel ICH 0000:00:1f.5: restoring config space at offset 0xf (was 0x200, writing 0x209) [ 572.391722] Intel ICH 0000:00:1f.5: restoring config space at offset 0x7 (was 0x0, writing 0xe8080800) [ 572.391729] Intel ICH 0000:00:1f.5: restoring config space at offset 0x6 (was 0x0, writing 0xe8080c00) [ 572.391735] Intel ICH 0000:00:1f.5: restoring config space at offset 0x5 (was 0x1, writing 0x18c1) [ 572.391741] Intel ICH 0000:00:1f.5: restoring config space at offset 0x4 (was 0x1, writing 0x1c01) [ 572.391749] Intel ICH 0000:00:1f.5: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900003) [ 572.391765] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 572.391772] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 572.397593] 8139too 0000:02:02.0: restoring config space at offset 0x5 (was 0x0, writing 0xe8100000) [ 572.397617] bttv 0000:02:0a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 572.397623] bttv 0000:02:0a.0: PCI INT A disabled [ 572.397626] bttv0: Can't enable device. [ 572.397628] pm_op(): pci_pm_resume+0x0/0x80 returns -5 [ 572.397639] PM: Device 0000:02:0a.0 failed to resume: error -5 [ 572.397647] pci 0000:02:0a.1: restoring config space at offset 0xf (was 0xff040100, writing 0xff040109) [ 572.397666] pci 0000:02:0a.1: restoring config space at offset 0x4 (was 0x8, writing 0xf8001008) [ 572.397672] pci 0000:02:0a.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000) [ 572.397679] pci 0000:02:0a.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800106) [ 572.416112] serial 00:07: activated [ 572.448101] parport_pc 00:08: activated [ 572.760049] sd 0:0:1:0: [sda] Starting disk [ 577.036337] ata2.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out [ 577.036341] ata2.00: ACPI cmd ef/03:ff:00:00:00:a0 filtered out [ 577.052426] ata2.00: configured for UDMA/33 [ 577.052520] sd 1:0:0:0: [sdb] 78242976 512-byte hardware sectors (40060 MB) [ 577.052552] sd 1:0:0:0: [sdb] Write Protect is off [ 577.052555] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 577.052606] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 577.596327] ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out [ 577.596331] ata1.01: ACPI cmd ef/03:42:00:00:00:b0 filtered out [ 577.620429] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 577.620433] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out [ 577.652363] ata1.00: configured for UDMA/33 [ 577.668335] ata1.01: configured for UDMA/33 [ 577.679576] sd 0:0:1:0: [sda] 39102336 512-byte hardware sectors (20020 MB) [ 577.679607] sd 0:0:1:0: [sda] Write Protect is off [ 577.679610] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 577.679661] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 577.679712] sd 0:0:1:0: [sda] 39102336 512-byte hardware sectors (20020 MB) [ 577.679740] sd 0:0:1:0: [sda] Write Protect is off [ 577.679743] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 577.679793] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 577.679867] sd 1:0:0:0: [sdb] Starting disk [ 577.948019] usb 3-1: reset low speed USB device using uhci_hcd and address 2 [ 578.272057] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 578.272066] pci 0000:00:02.0: setting latency timer to 64 [ 578.273986] PM: resume devices took 5.920 seconds [ 578.273999] ------------[ cut here ]------------ [ 578.274002] WARNING: at /build/buildd/linux-2.6.27/kernel/power/main.c:176 suspend_test_finish+0x74/0x80() [ 578.274005] Modules linked in: af_packet i915 drm binfmt_misc bridge stp bnep rfcomm sco l2cap bluetooth ppdev ipv6 speedstep_lib cpufreq_conservative cpufreq_userspace cpufreq_stats cpufreq_ondemand freq_table cpufreq_powersave video output wmi pci_slot sbs sbshc battery iptable_filter ip_tables x_tables ac lp snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm evdev snd_seq_dummy tuner_simple tuner_types parport_pc parport tea5767 tuner snd_seq_oss bttv snd_seq_midi videodev v4l1_compat ir_common container compat_ioctl32 i2c_algo_bit snd_rawmidi v4l2_common videobuf_dma_sg videobuf_core btcx_risc tveeprom snd_seq_midi_event snd_seq i2c_core snd_timer snd_seq_device pcspkr snd soundcore snd_page_alloc button iTCO_wdt iTCO_vendor_support shpchp pci_hotplug intel_agp agpgart ext3 jbd mbcache usbhid hid sd_mod crc_t10dif sr_mod cdrom sg ata_generic pata_acpi 8139too ata_piix libata 8139cp mii scsi_mod dock ehci_hcd uhci_hcd usbcore thermal processor fan fbcon tileblit font bitblit softcursor fuse [ 578.274092] Pid: 5942, comm: pm-suspend Not tainted 2.6.27-9-generic #1 [ 578.274097] [] ? printk+0x1d/0x1f [ 578.274109] [] warn_on_slowpath+0x59/0x90 [ 578.274117] [] ? sched_clock_cpu+0xd5/0x170 [ 578.274123] [] ? down_trylock+0x2f/0x40 [ 578.274127] [] ? try_acquire_console_sem+0x12/0x40 [ 578.274133] [] ? kobject_put+0x20/0x50 [ 578.274139] [] suspend_test_finish+0x74/0x80 [ 578.274144] [] suspend_devices_and_enter+0xe6/0x190 [ 578.274148] [] enter_state+0xd1/0x100 [ 578.274152] [] state_store+0x85/0xd0 [ 578.274155] [] ? state_store+0x0/0xd0 [ 578.274159] [] kobj_attr_store+0x24/0x30 [ 578.274163] [] sysfs_write_file+0x97/0x100 [ 578.274168] [] vfs_write+0xa0/0x110 [ 578.274173] [] ? sysfs_write_file+0x0/0x100 [ 578.274177] [] sys_write+0x42/0x70 [ 578.274181] [] sysenter_do_call+0x12/0x2f [ 578.274186] [] ? netdev_exit+0x10/0x20 [ 578.274191] ======================= [ 578.274194] ---[ end trace 27d957735d51f81e ]--- [ 578.274319] PM: Finishing wakeup. [ 578.274323] Restarting tasks ... done. [ 579.294124] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 589.828023] eth0: no IPv6 routers present