# xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # Note that some configuration settings that could be done previously # in this file, now are automatically configured by the server and settings # here are ignored. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "Device" Identifier "Configured Video Device" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" EndSection ---------- Xorg.0.log ---------- X.Org X Server 1.5.2 Release Date: 10 October 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-19-server i686 Ubuntu Current Operating System: Linux Tux 2.6.27-8-generic #1 SMP Thu Nov 6 17:33:54 UTC 2008 i686 Build Date: 24 October 2008 08:00:16AM xorg-server 2:1.5.2-2ubuntu3 (buildd@rothera.buildd) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 29 15:09:27 2008 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Configured Monitor" (**) | |-->Device "Configured Video Device" (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Open ACPI successful (/var/run/acpid.socket) (II) Loader magic: 0x81d9a40 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 4.1 X.Org XInput driver : 2.1 X.Org Server Extension : 1.1 X.Org Font Renderer : 0.6 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0@0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/0, 0xe0000000/0, I/O @ 0x00001800/0 (--) PCI: (0@0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/0, 0xe0080000/0 (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 1.1 (==) AIGLX enabled (==) Exporting typical set of GLX visuals (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.5.2, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.6 (II) Loading font FreeType (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 1.1 (II) Loading extension XFree86-DRI (II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers (II) Matched intel from file name intel.ids (==) Matched intel for the autoconfigured driver (==) Assigned the driver to the xf86ConfigLayout (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.5.2, module version = 2.4.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 4.1 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43 (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 4.1 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.1.0 ABI class: X.Org Video Driver, version 4.1 (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.5.2, module version = 0.1.0 ABI class: X.Org Video Driver, version 4.1 (II) intel(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (==) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 852GM (--) intel(0): Chipset: "852GM/855GM" (--) intel(0): Linear framebuffer at 0xE8000000 (--) intel(0): IO registers at addr 0xE0000000 (II) intel(0): 2 display pipes available. (==) intel(0): Using EXA for acceleration (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/lib/xorg/modules//libint10.so (II) intel(0): initializing int10 (II) intel(0): Primary V_BIOS segment is: 0xc000 (II) intel(0): VESA BIOS detected (II) intel(0): VESA VBE Version 3.0 (II) intel(0): VESA VBE Total Mem: 16192 kB (II) intel(0): VESA VBE OEM: Intel(r)852MG/852MGE/855MG/855MGE Graphics Chip Accelerated VGA BIOS (II) intel(0): VESA VBE OEM Software Rev: 1.0 (II) intel(0): VESA VBE OEM Vendor: Intel Corporation (II) intel(0): VESA VBE OEM Product: Intel(r)852MG/852MGE/855MG/855MGE Graphics Controller (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA using monitor section Configured Monitor (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): Output LVDS has no monitor section (II) intel(0): I2C bus "LVDSDDC_C" initialized. (II) intel(0): Attempting to determine panel fixed mode. (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): I2C device "LVDSDDC_C:ddc2" removed. (II) intel(0): found backlight control method /sys/class/backlight/acpi_video0 (II) intel(0): I2C bus "DVODDC_D" initialized. (II) Loading sub module "sil164" (II) LoadModule: "sil164" (II) Loading /usr/lib/xorg/modules/drivers//sil164.so (II) Module sil164: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 4.1 (II) intel(0): I2C bus "DVOI2C_E" initialized. (II) Loading sub module "ch7xxx" (II) LoadModule: "ch7xxx" (II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so (II) Module ch7xxx: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 4.1 (II) intel(0): I2C bus "DVOI2C_E" removed. (II) intel(0): I2C bus "DVOI2C_E" initialized. (II) intel(0): Detected CH7009A chipset, vendor/device ID 0x84/0x17 (II) intel(0): I2C device "DVOI2C_E:CH7xxx TMDS Controller" registered at address 0xEC. (II) intel(0): Output TMDS has no monitor section (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): I2C device "LVDSDDC_C:ddc2" removed. (II) intel(0): Output VGA disconnected (II) intel(0): Output LVDS connected (II) intel(0): Output TMDS disconnected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS using initial mode 1400x1050 (II) intel(0): Monitoring connected displays enabled (II) intel(0): detected 128 kB GTT. (II) intel(0): detected 16252 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Will not try to enable page flipping (==) intel(0): Triple buffering disabled (==) intel(0): Intel XvMC decoder disabled (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/lib/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.5.2, module version = 2.4.0 ABI class: X.Org Video Driver, version 4.1 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009 (WW) intel(0): PP_STATUS before: on, ready, sequencing idle (WW) intel(0): PP_STATUS after: on, ready, sequencing on (WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x80000202 to 0x00000202 (WW) intel(0): PIPEBSTAT before: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS (WW) intel(0): PIPEBSTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 236544 total, 1 used (II) intel(0): I830CheckAvailableMemory: 946172 kB available drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: drmOpenMinor returns 11 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) [drm] loaded kernel module for "i915" driver. (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. (II) intel(0): [drm] framebuffer mapped by ddx driver (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): X context handle = 0x1 (II) intel(0): [drm] installed DRM signal handler (**) intel(0): Framebuffer compression enabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 131072 KB (II) intel(0): Attempting memory allocation with tiled buffers. (WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed (Cannot allocate memory) (WW) intel(0): Allocation error, framebuffer compression disabled (WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed (Cannot allocate memory) (WW) intel(0): Failed to allocate texture space. (II) intel(0): Tiled allocation failed. (II) intel(0): Attempting memory allocation with untiled buffers. (WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed (Cannot allocate memory) (II) intel(0): Untiled allocation successful. (II) intel(0): [drm] Registers = 0xe0000000 (II) intel(0): [drm] ring buffer = 0xe8000000 (II) intel(0): [drm] mapped front buffer at 0xe8030000, handle = 0xe8030000 (II) intel(0): [drm] mapped back buffer at 0xe87b5000, handle = 0xe87b5000 (II) intel(0): [drm] mapped depth buffer at 0xea679000, handle = 0xea679000 (II) intel(0): [drm] mapped classic textures at 0xeadfe000, handle = 0xeadfe000 (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432 (II) intel(0): [dri] visual configs initialized (II) intel(0): Page Flipping disabled (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) EXA(0): Offscreen pixmap area of 23654400 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): [DRI] installation complete (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00fdf000 (pgoffset 4063) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00fe0000 (pgoffset 4064) (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x00fe4000 (pgoffset 4068) (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x00fe5000 (pgoffset 4069) (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x00fe9000 (pgoffset 4073) (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x00fea000 (pgoffset 4074) (II) intel(0): xf86BindGARTMemory: bind key 6 at 0x02679000 (pgoffset 9849) (II) intel(0): xf86BindGARTMemory: bind key 7 at 0x02dfe000 (pgoffset 11774) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x00027fff: logical 3D context (32 kB) (II) intel(0): 0x00030000-0x007b4fff: front buffer (7700 kB) (II) intel(0): 0x007b5000-0x00f39fff: back buffer (7700 kB) (II) intel(0): 0x00fdf000: end of stolen memory (II) intel(0): 0x00fdf000-0x00fdffff: Core cursor (4 kB, 0x000000002a660000 physical ) (II) intel(0): 0x00fe0000-0x00fe3fff: ARGB cursor (16 kB, 0x000000002a404000 physical ) (II) intel(0): 0x00fe4000-0x00fe4fff: Core cursor (4 kB, 0x000000002b646000 physical ) (II) intel(0): 0x00fe5000-0x00fe8fff: ARGB cursor (16 kB, 0x000000002aae4000 physical ) (II) intel(0): 0x00fe9000-0x00fe9fff: overlay registers (4 kB, 0x000000002a65b000 physical ) (II) intel(0): 0x00fea000-0x02678fff: exa offscreen (23100 kB) (II) intel(0): 0x02679000-0x02dfdfff: depth buffer (7700 kB) (II) intel(0): 0x02dfe000-0x04dfdfff: classic textures (32768 kB) (II) intel(0): 0x08000000: end of aperture (II) intel(0): using SSC reference clock of 100 MHz (WW) intel(0): Chosen PLL clock of 100.0 Mhz more than 2% away from desired 108.0 Mhz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane A is now enabled and connected to pipe A. (WW) intel(0): Hardware claims pipe A is on while software believes it is off (WW) intel(0): Hardware claims plane A is on while software believes it is off (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output TMDS is connected to pipe none (II) intel(0): [drm] dma control initialized, using IRQ 16 (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): DPMS enabled (II) intel(0): Set up overlay video (II) intel(0): direct rendering: Enabled (--) RandR disabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 12, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 12, (OK) drmOpenByBusid: drmOpenMinor returns 12 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: enabled GLX_texture_from_pixmap with driver support (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) intel(0): Setting screen physical size to 370 x 277 (EE) intel(0): underrun on pipe B! (II) config/hal: Adding input device Macintosh mouse button emulation (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.5.2, module version = 2.0.99 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.1 (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event0" (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Configuring as mouse (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint (II) LoadModule: "synaptics" (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.5.2, module version = 0.15.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.1 (II) Synaptics touchpad driver version 0.15.2 (II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (**) Option "Device" "/dev/input/event8" (--) AlpsPS/2 ALPS GlidePoint touchpad found (**) AlpsPS/2 ALPS GlidePoint: always reports core events (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD) (II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (--) AlpsPS/2 ALPS GlidePoint touchpad found (II) config/hal: Adding input device PS/2 Mouse (**) PS/2 Mouse: always reports core events (**) PS/2 Mouse: Device: "/dev/input/event7" (II) PS/2 Mouse: Found x and y relative axes (II) PS/2 Mouse: Found 3 mouse buttons (II) PS/2 Mouse: Configuring as mouse (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE) (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5 (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) config/hal: Adding input device AT Translated Set 2 keyboard (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) AT Translated Set 2 keyboard: xkb_rules: "evdev" (**) Option "xkb_model" "pc105" (**) AT Translated Set 2 keyboard: xkb_model: "pc105" (**) Option "xkb_layout" "us" (**) AT Translated Set 2 keyboard: xkb_layout: "us" (II) config/hal: Adding input device Logitech USB Receiver (**) Logitech USB Receiver: always reports core events (**) Logitech USB Receiver: Device: "/dev/input/event2" (II) Logitech USB Receiver: Found x and y relative axes (II) Logitech USB Receiver: Found 8 mouse buttons (II) Logitech USB Receiver: Configuring as mouse (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE) (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5 (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) config/hal: Adding input device Video Bus (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event9" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Video Bus: xkb_rules: "evdev" (**) Option "xkb_model" "pc105" (**) Video Bus: xkb_model: "pc105" (**) Option "xkb_layout" "us" (**) Video Bus: xkb_layout: "us" (EE) intel(0): tried to update DSPARB with both planes enabled! (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): I2C device "LVDSDDC_C:ddc2" removed. (EE) intel(0): underrun on pipe B! (EE) intel(0): underrun on pipe B! (EE) intel(0): tried to update DSPARB with both planes enabled! (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): I2C device "LVDSDDC_C:ddc2" removed. AUDIT: Mon Dec 29 15:09:45 2008: 5777 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=6027 ) AUDIT: Mon Dec 29 15:09:45 2008: 5777 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=6028 ) AUDIT: Mon Dec 29 15:09:45 2008: 5777 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=6029 ) (EE) intel(0): tried to update DSPARB with both planes enabled! (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): I2C device "LVDSDDC_C:ddc2" removed. (EE) intel(0): tried to update DSPARB with both planes enabled! (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): I2C device "LVDSDDC_C:ddc2" removed. (EE) intel(0): tried to update DSPARB with both planes enabled! (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): I2C device "LVDSDDC_C:ddc2" removed. (EE) intel(0): tried to update DSPARB with both planes enabled! (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): I2C device "LVDSDDC_C:ddc2" removed. (EE) intel(0): tried to update DSPARB with both planes enabled! (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): I2C device "LVDSDDC_C:ddc2" removed. (EE) intel(0): tried to update DSPARB with both planes enabled! (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): I2C device "LVDSDDC_C:ddc2" removed. ----- dmesg ----- [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-8-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 6 17:33:54 UTC 2008 (Ubuntu 2.6.27-8.17-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003eee0000 (usable) [ 0.000000] BIOS-e820: 000000003eee0000 - 000000003eeeb000 (ACPI data) [ 0.000000] BIOS-e820: 000000003eeeb000 - 000000003ef00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ef00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) [ 0.000000] last_pfn = 0x3eee0 max_arch_pfn = 0x100000 [ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000 [ 0.000000] RAMDISK: 3781e000 - 37fef00b [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F6610, 0014 (r0 COMPAL) [ 0.000000] ACPI: RSDT 3EEE593F, 0030 (r1 COMPAL Montara 6040000 LTP 0) [ 0.000000] ACPI: FACP 3EEEAED2, 0074 (r1 COMPAL MONTARA 6040000 PTL 50) [ 0.000000] ACPI: DSDT 3EEE5973, 555F (r1 COMPAL MONTARAG 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 3EEFBFC0, 0040 [ 0.000000] ACPI: BOOT 3EEEAFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: APIC 3EEEAF7E, 005A (r1 INTEL MONTARAG 6040000 PTL 50) [ 0.000000] 110MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 38000000 [ 0.000000] low ram: 00000000 - 38000000 [ 0.000000] bootmap 00008000 - 0000f000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20] [ 0.000000] #4 [003781e000 - 0037fef00b] RAMDISK ==> [003781e000 - 0037fef00b] [ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000] [ 0.000000] #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00038000 [ 0.000000] HighMem 0x00038000 -> 0x0003eee0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003eee0 [ 0.000000] On node 0 totalpages: 257663 [ 0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map c1000000 [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 223300 pages, LIFO batch:31 [ 0.000000] HighMem zone: 28134 pages, LIFO batch:7 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000 [ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000 [ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec10000) [ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255397 [ 0.000000] Kernel command line: root=UUID=279f079c-17ff-4b12-b989-a9bc46b15f7b ro single [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PIT calibration value [ 0.000000] Detected 2198.129 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 1007396k/1031040k available (2572k kernel code, 22844k reserved, 1160k data, 424k init, 113536k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB) [ 0.004000] .data : 0xc03832da - 0xc04a5680 (1160 kB) [ 0.004000] .text : 0xc0100000 - 0xc03832da (2572 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.004021] Calibrating delay loop (skipped), value calculated using timer frequency.. 4396.25 BogoMIPS (lpj=8792516) [ 0.004185] Security Framework initialized [ 0.004263] SELinux: Disabled at boot. [ 0.004360] AppArmor: AppArmor initialized [ 0.004442] Mount-cache hash table entries: 512 [ 0.004793] Initializing cgroup subsys ns [ 0.004864] Initializing cgroup subsys cpuacct [ 0.004931] Initializing cgroup subsys memory [ 0.005019] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.005123] CPU: L2 cache: 512K [ 0.005188] CPU: Hyper-Threading is disabled [ 0.005273] Checking 'hlt' instruction... OK. [ 0.020750] SMP alternatives: switching to UP code [ 0.030883] Freeing SMP alternatives: 11k freed [ 0.030959] ACPI: Core revision 20080609 [ 0.035181] ACPI: Checking initramfs for custom DSDT [ 0.472237] ENABLING IO-APIC IRQs [ 0.472491] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.514527] CPU0: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 2.20GHz stepping 09 [ 0.516031] Brought up 1 CPUs [ 0.516031] Total of 1 processors activated (4396.25 BogoMIPS). [ 0.516031] CPU0 attaching sched-domain: [ 0.516031] domain 0: span 0 level CPU [ 0.516031] groups: 0 [ 0.516031] net_namespace: 840 bytes [ 0.516031] Booting paravirtualized kernel on bare hardware [ 0.516031] Time: 20:08:34 Date: 12/29/08 [ 0.516031] NET: Registered protocol family 16 [ 0.516031] EISA bus registered [ 0.516031] ACPI: bus type pci registered [ 0.516031] PCI: PCI BIOS revision 2.10 entry at 0xfd7f4, last bus=2 [ 0.516031] PCI: Using configuration type 1 for base access [ 0.518574] ACPI: EC: Look up EC in DSDT [ 0.525576] ACPI: Interpreter enabled [ 0.525648] ACPI: (supports S0 S3 S4 S5) [ 0.525862] ACPI: Using IOAPIC for interrupt routing [ 0.528051] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.544103] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.670121] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62 [ 0.670198] ACPI: EC: driver started in poll mode [ 0.670353] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.670657] PCI: 0000:00:02.0 reg 10 32bit mmio: [e8000000, efffffff] [ 0.670665] PCI: 0000:00:02.0 reg 14 32bit mmio: [e0000000, e007ffff] [ 0.670672] PCI: 0000:00:02.0 reg 18 io port: [1800, 1807] [ 0.670698] pci 0000:00:02.0: supports D1 [ 0.670720] PCI: 0000:00:02.1 reg 10 32bit mmio: [f0000000, f7ffffff] [ 0.670728] PCI: 0000:00:02.1 reg 14 32bit mmio: [e0080000, e00fffff] [ 0.670758] pci 0000:00:02.1: supports D1 [ 0.670840] PCI: 0000:00:1d.0 reg 20 io port: [1820, 183f] [ 0.670897] PCI: 0000:00:1d.1 reg 20 io port: [1840, 185f] [ 0.670955] PCI: 0000:00:1d.2 reg 20 io port: [1860, 187f] [ 0.671022] PCI: 0000:00:1d.7 reg 10 32bit mmio: [e0100000, e01003ff] [ 0.671080] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.671154] pci 0000:00:1d.7: PME# disabled [ 0.671299] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.671377] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 0.671471] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO [ 0.671561] PCI: 0000:00:1f.1 reg 10 io port: [0, 7] [ 0.671569] PCI: 0000:00:1f.1 reg 14 io port: [0, 3] [ 0.671577] PCI: 0000:00:1f.1 reg 18 io port: [0, 7] [ 0.671586] PCI: 0000:00:1f.1 reg 1c io port: [0, 3] [ 0.671594] PCI: 0000:00:1f.1 reg 20 io port: [1810, 181f] [ 0.671602] PCI: 0000:00:1f.1 reg 24 32bit mmio: [0, 3ff] [ 0.671657] PCI: 0000:00:1f.3 reg 20 io port: [1500, 151f] [ 0.671705] PCI: 0000:00:1f.5 reg 10 io port: [1c00, 1cff] [ 0.671713] PCI: 0000:00:1f.5 reg 14 io port: [18c0, 18ff] [ 0.671721] PCI: 0000:00:1f.5 reg 18 32bit mmio: [e0100c00, e0100dff] [ 0.671729] PCI: 0000:00:1f.5 reg 1c 32bit mmio: [e0100800, e01008ff] [ 0.671759] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.671831] pci 0000:00:1f.5: PME# disabled [ 0.671921] PCI: 0000:00:1f.6 reg 10 io port: [2400, 24ff] [ 0.671929] PCI: 0000:00:1f.6 reg 14 io port: [2000, 207f] [ 0.671968] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.672051] pci 0000:00:1f.6: PME# disabled [ 0.672155] PCI: 0000:02:00.0 reg 10 32bit mmio: [e0200000, e02007ff] [ 0.672164] PCI: 0000:02:00.0 reg 14 io port: [3400, 347f] [ 0.672205] pci 0000:02:00.0: supports D2 [ 0.672208] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold [ 0.672280] pci 0000:02:00.0: PME# disabled [ 0.672376] PCI: 0000:02:03.0 reg 10 io port: [3000, 30ff] [ 0.672384] PCI: 0000:02:03.0 reg 14 32bit mmio: [e0200800, e02008ff] [ 0.672425] pci 0000:02:03.0: supports D1 [ 0.672427] pci 0000:02:03.0: supports D2 [ 0.672430] pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold [ 0.672502] pci 0000:02:03.0: PME# disabled [ 0.672594] PCI: 0000:02:04.0 reg 10 32bit mmio: [0, fff] [ 0.672610] pci 0000:02:04.0: supports D1 [ 0.672612] pci 0000:02:04.0: supports D2 [ 0.672615] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.672688] pci 0000:02:04.0: PME# disabled [ 0.672780] PCI: 0000:02:04.1 reg 10 32bit mmio: [0, fff] [ 0.672796] pci 0000:02:04.1: supports D1 [ 0.672798] pci 0000:02:04.1: supports D2 [ 0.672801] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.672874] pci 0000:02:04.1: PME# disabled [ 0.672979] pci 0000:00:1e.0: transparent bridge [ 0.673047] PCI: bridge 0000:00:1e.0 io port: [3000, 3fff] [ 0.673052] PCI: bridge 0000:00:1e.0 32bit mmio: [e0200000, e02fffff] [ 0.673099] bus 00 -> node 0 [ 0.673111] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.673507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.683545] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11) [ 0.683936] ACPI: PCI Interrupt Link [LNKB] (IRQs *10 11) [ 0.684297] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11) [ 0.684672] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11) [ 0.685054] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled. [ 0.685464] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled. [ 0.685873] ACPI: PCI Interrupt Link [LNKG] (IRQs 11) *0, disabled. [ 0.686281] ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11) [ 0.686791] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.686928] pnp: PnP ACPI init [ 0.687002] ACPI: bus type pnp registered [ 0.751952] pnp: PnP ACPI: found 9 devices [ 0.752036] ACPI: ACPI bus type pnp unregistered [ 0.752106] PnPBIOS: Disabled by ACPI PNP [ 0.752799] PCI: Using ACPI for IRQ routing [ 0.753060] NET: Registered protocol family 8 [ 0.753060] NET: Registered protocol family 20 [ 0.753060] NetLabel: Initializing [ 0.753060] NetLabel: domain hash size = 128 [ 0.753060] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.753060] NetLabel: unlabeled traffic allowed by default [ 0.753060] tracer: 772 pages allocated for 65536 entries of 48 bytes [ 0.753060] actual entries 65620 [ 0.753327] AppArmor: AppArmor Filesystem Enabled [ 0.753414] ACPI: RTC can wake from S4 [ 0.753492] system 00:04: ioport range 0x200-0x20f has been reserved [ 0.753492] system 00:04: ioport range 0x600-0x60f has been reserved [ 0.753492] system 00:04: ioport range 0x700-0x70f has been reserved [ 0.753492] system 00:04: ioport range 0x800-0x80f has been reserved [ 0.753492] system 00:04: ioport range 0x1000-0x107f has been reserved [ 0.753492] system 00:04: ioport range 0x1180-0x11bf has been reserved [ 0.753492] system 00:04: ioport range 0x1200-0x120f has been reserved [ 0.756044] system 00:04: ioport range 0xfe00-0xfe01 has been reserved [ 0.756118] system 00:04: iomem range 0xfebffc00-0xfebfffff has been reserved [ 0.756192] system 00:04: iomem range 0xfff80000-0xffffffff could not be reserved [ 0.756283] system 00:04: iomem range 0xfabf8000-0xfabf8fdf has been reserved [ 0.756356] system 00:04: iomem range 0xfabfa000-0xfabfafdf has been reserved [ 0.791921] pci 0000:02:04.0: CardBus bridge, secondary bus 0000:03 [ 0.791995] pci 0000:02:04.0: IO window: 0x003800-0x0038ff [ 0.792066] pci 0000:02:04.0: IO window: 0x003c00-0x003cff [ 0.792136] pci 0000:02:04.0: PREFETCH window: 0x50000000-0x53ffffff [ 0.792210] pci 0000:02:04.0: MEM window: 0x5c000000-0x5fffffff [ 0.792283] pci 0000:02:04.1: CardBus bridge, secondary bus 0000:07 [ 0.792353] pci 0000:02:04.1: IO window: 0x001400-0x0014ff [ 0.792422] pci 0000:02:04.1: IO window: 0x002800-0x0028ff [ 0.792492] pci 0000:02:04.1: PREFETCH window: 0x54000000-0x57ffffff [ 0.792565] pci 0000:02:04.1: MEM window: 0x60000000-0x63ffffff [ 0.792636] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.792706] pci 0000:00:1e.0: IO window: 0x3000-0x3fff [ 0.792777] pci 0000:00:1e.0: MEM window: 0xe0200000-0xe02fffff [ 0.792849] pci 0000:00:1e.0: PREFETCH window: 0x00000050000000-0x00000057ffffff [ 0.792957] pci 0000:00:1e.0: setting latency timer to 64 [ 0.792976] pci 0000:02:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.793057] pci 0000:02:04.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.793130] bus: 00 index 0 io port: [0, ffff] [ 0.793195] bus: 00 index 1 mmio: [0, ffffffff] [ 0.793260] bus: 02 index 0 io port: [3000, 3fff] [ 0.793325] bus: 02 index 1 mmio: [e0200000, e02fffff] [ 0.793391] bus: 02 index 2 mmio: [50000000, 57ffffff] [ 0.793456] bus: 02 index 3 io port: [0, ffff] [ 0.793520] bus: 02 index 4 mmio: [0, ffffffff] [ 0.793585] bus: 03 index 0 io port: [3800, 38ff] [ 0.793649] bus: 03 index 1 io port: [3c00, 3cff] [ 0.793714] bus: 03 index 2 mmio: [50000000, 53ffffff] [ 0.793780] bus: 03 index 3 mmio: [5c000000, 5fffffff] [ 0.793846] bus: 07 index 0 io port: [1400, 14ff] [ 0.793911] bus: 07 index 1 io port: [2800, 28ff] [ 0.793975] bus: 07 index 2 mmio: [54000000, 57ffffff] [ 0.794042] bus: 07 index 3 mmio: [60000000, 63ffffff] [ 0.794123] NET: Registered protocol family 2 [ 0.794410] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.794980] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.796374] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.797167] TCP: Hash tables configured (established 131072 bind 65536) [ 0.797250] TCP reno registered [ 0.797558] NET: Registered protocol family 1 [ 0.797816] checking if image is initramfs... it is [ 1.295895] Switched to high resolution mode on CPU 0 [ 1.695549] Freeing initrd memory: 8004k freed [ 1.695943] Simple Boot Flag at 0x36 set to 0x1 [ 1.696871] audit: initializing netlink socket (disabled) [ 1.696970] type=2000 audit(1230581314.696:1): initialized [ 1.703076] highmem bounce pool size: 64 pages [ 1.703158] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.706831] VFS: Disk quotas dquot_6.5.1 [ 1.707055] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.707299] msgmni has been set to 1762 [ 1.707565] io scheduler noop registered [ 1.707631] io scheduler anticipatory registered [ 1.707697] io scheduler deadline registered [ 1.707778] io scheduler cfq registered (default) [ 1.707866] pci 0000:00:02.0: Boot video device [ 1.709000] isapnp: Scanning for PnP cards... [ 2.062921] isapnp: No Plug & Play device found [ 2.131841] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.133059] serial 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.133144] serial 0000:00:1f.6: PCI INT B disabled [ 2.135941] brd: module loaded [ 2.136165] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 2.136468] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.146571] i8042.c: Detected active multiplexing controller, rev 1.1. [ 2.152060] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.152134] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 2.152203] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 2.152269] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 2.152335] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 2.153271] mice: PS/2 mouse device common for all mice [ 2.153604] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 2.153698] rtc0: alarms up to one month, y3k [ 2.153978] EISA: Probing bus 0 at eisa.0 [ 2.154051] Cannot allocate resource for EISA slot 1 [ 2.154118] Cannot allocate resource for EISA slot 2 [ 2.154183] Cannot allocate resource for EISA slot 3 [ 2.154269] EISA: Detected 0 cards. [ 2.154333] cpuidle: using governor ladder [ 2.154397] cpuidle: using governor menu [ 2.155217] TCP cubic registered [ 2.155335] Using IPI No-Shortcut mode [ 2.155812] registered taskstats version 1 [ 2.156067] Magic number: 4:404:145 [ 2.156290] acpi device:16: hash matches [ 2.156394] rtc_cmos 00:01: setting system clock to 2008-12-29 20:08:36 UTC (1230581316) [ 2.156487] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.156556] EDD information not available. [ 2.157221] Freeing unused kernel memory: 424k freed [ 2.157356] Write protecting the kernel text: 2576k [ 2.157462] Write protecting the kernel read-only data: 936k [ 2.178725] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 2.394877] fuse init (API version 7.9) [ 2.432202] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 2.432506] processor ACPI0007:00: registered as cooling_device0 [ 2.432580] ACPI: Processor [CPU0] (supports 8 throttling states) [ 2.448007] Marking TSC unstable due to TSC halts in idle [ 2.548484] thermal LNXTHERM:01: registered as thermal_zone0 [ 2.772202] ACPI: Thermal Zone [THRM] (63 C) [ 2.792033] Clocksource tsc unstable (delta = -314145054 ns) [ 3.390403] ACPI: ACPI Dock Station Driver [ 3.571798] usbcore: registered new interface driver usbfs [ 3.571915] usbcore: registered new interface driver hub [ 3.584340] usbcore: registered new device driver usb [ 3.644783] SCSI subsystem initialized [ 3.651088] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 3.651183] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3.651189] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.651328] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 3.655327] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.655398] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 3.655423] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0100000 [ 3.662841] USB Universal Host Controller Interface driver v3.0 [ 3.692522] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.692936] usb usb1: configuration #1 chosen from 1 choice [ 3.693047] hub 1-0:1.0: USB hub found [ 3.693128] hub 1-0:1.0: 6 ports detected [ 3.752694] libata version 3.00 loaded. [ 3.769585] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 3.900785] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.900879] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.900884] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.900998] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.901130] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820 [ 3.901366] usb usb2: configuration #1 chosen from 1 choice [ 3.901477] hub 2-0:1.0: USB hub found [ 3.901553] hub 2-0:1.0: 2 ports detected [ 4.012064] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 4.108972] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 4.109061] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 4.109068] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.109189] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 4.109317] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 [ 4.109621] usb usb3: configuration #1 chosen from 1 choice [ 4.109732] hub 3-0:1.0: USB hub found [ 4.109808] hub 3-0:1.0: 2 ports detected [ 4.316474] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.316568] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 4.316574] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.316687] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 4.316819] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 4.317059] usb usb4: configuration #1 chosen from 1 choice [ 4.317182] hub 4-0:1.0: USB hub found [ 4.317261] hub 4-0:1.0: 2 ports detected [ 4.330715] usb 1-1: configuration #1 chosen from 1 choice [ 4.420597] pata_acpi 0000:00:1f.1: enabling device (0005 -> 0007) [ 4.420681] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 4.420827] pata_acpi 0000:00:1f.1: setting latency timer to 64 [ 4.420847] pata_acpi 0000:00:1f.1: PCI INT A disabled [ 4.421041] ohci1394 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.473935] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[e0200000-e02007ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 4.483466] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 4.483568] 8139cp 0000:02:03.0: Try the "8139too" driver instead. [ 4.489963] 8139too Fast Ethernet driver 0.9.28 [ 4.490094] 8139too 0000:02:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.490973] eth0: RealTek RTL8139 at 0x3000, 00:02:3f:11:d9:2b, IRQ 19 [ 4.491045] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 4.501324] ata_piix 0000:00:1f.1: version 2.12 [ 4.501345] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 4.501492] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 4.502076] scsi0 : ata_piix [ 4.503797] scsi1 : ata_piix [ 4.505725] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 4.505800] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 4.652103] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 4.668544] ata1.00: ATA-6: ST98823A, 3.04, max UDMA/100 [ 4.668622] ata1.00: 156301488 sectors, multi 16: LBA48 [ 4.684475] ata1.00: configured for UDMA/100 [ 4.829742] usb 3-1: configuration #1 chosen from 1 choice [ 4.840526] ata2.00: ATAPI: QSI CD-RW/DVD-ROM SBW-241, VY02, max UDMA/33 [ 4.841124] ata2.00: configured for UDMA/33 [ 4.841384] scsi 0:0:0:0: Direct-Access ATA ST98823A 3.04 PQ: 0 ANSI: 5 [ 4.842267] scsi 1:0:0:0: CD-ROM QSI CDRW/DVD SBW-241 VY02 PQ: 0 ANSI: 5 [ 5.009214] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.009343] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.072311] Driver 'sd' needs updating - please use bus_type methods [ 5.072604] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 5.072711] sd 0:0:0:0: [sda] Write Protect is off [ 5.072778] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.072842] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.073071] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 5.073172] sd 0:0:0:0: [sda] Write Protect is off [ 5.073240] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.073297] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.073396] sda: sda1 sda2 <<6>usbcore: registered new interface driver hiddev [ 5.106602] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2 [ 5.108765] Driver 'sr' needs updating - please use bus_type methods [ 5.112401] sda5 > [ 5.112782] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.120370] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1 [ 5.122132] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 5.122211] Uniform CD-ROM driver Revision: 3.20 [ 5.122422] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.134757] hiddev96hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1 [ 5.134987] usbcore: registered new interface driver usbhid [ 5.135065] usbhid: v2.6:USB HID core driver [ 5.423610] PM: Starting manual resume from disk [ 5.423680] PM: Resume from partition 8:5 [ 5.423682] PM: Checking hibernation image. [ 5.423959] PM: Resume from disk failed. [ 5.458763] EXT3-fs: INFO: recovery required on readonly filesystem. [ 5.458842] EXT3-fs: write access will be enabled during recovery. [ 5.752244] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f3c36000e97] [ 11.303514] kjournald starting. Commit interval 5 seconds [ 11.303620] EXT3-fs: sda1: orphan cleanup on readonly fs [ 11.303693] ext3_orphan_cleanup: deleting unreferenced inode 1222050 [ 11.334897] ext3_orphan_cleanup: deleting unreferenced inode 1753233 [ 11.335112] ext3_orphan_cleanup: deleting unreferenced inode 2867206 [ 11.335128] ext3_orphan_cleanup: deleting unreferenced inode 2867205 [ 11.335139] ext3_orphan_cleanup: deleting unreferenced inode 2867204 [ 11.335150] ext3_orphan_cleanup: deleting unreferenced inode 2867203 [ 11.335161] ext3_orphan_cleanup: deleting unreferenced inode 2867202 [ 11.335172] EXT3-fs: sda1: 7 orphan inodes deleted [ 11.335240] EXT3-fs: recovery complete. [ 11.392468] EXT3-fs: mounted filesystem with ordered data mode. [ 20.057792] udevd version 124 started [ 21.251271] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 21.288386] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 21.329451] iTCO_vendor_support: vendor-support=0 [ 21.355944] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 21.357383] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060) [ 21.357796] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 21.405021] Linux agpgart interface v0.103 [ 21.434670] agpgart-intel 0000:00:00.0: Intel 855GM Chipset [ 21.434886] agpgart-intel 0000:00:00.0: detected 16252K stolen memory [ 21.453289] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 [ 21.547005] intel_rng: FWH not detected [ 21.918759] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 22.112234] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 22.124145] ACPI: Power Button (FF) [PWRF] [ 22.124420] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5 [ 22.124625] ACPI: Lid Switch [LID] [ 22.124805] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6 [ 22.140043] ACPI: Power Button (CM) [PWRB] [ 23.233837] Yenta: CardBus bridge found at 0000:02:04.0 [14c0:0012] [ 23.233938] Yenta: Using CSCINT to route CSC interrupts to PCI [ 23.234006] Yenta: Routing CardBus interrupts to PCI [ 23.234075] Yenta TI: socket 0000:02:04.0, mfunc 0x011c1122, devctl 0x44 [ 23.442534] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input7 [ 23.464824] Yenta: ISA IRQ mask 0x0cb8, PCI irq 20 [ 23.464900] Socket status: 30000006 [ 23.464964] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 23.465062] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 23.465133] cs: IO port probe 0x3000-0x3fff: clean. [ 23.465549] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff [ 23.465621] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x57ffffff [ 23.466211] Yenta: CardBus bridge found at 0000:02:04.1 [14c0:0012] [ 23.466304] Yenta: Using CSCINT to route CSC interrupts to PCI [ 23.466372] Yenta: Routing CardBus interrupts to PCI [ 23.466441] Yenta TI: socket 0000:02:04.1, mfunc 0x011c1122, devctl 0x44 [ 23.473470] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input8 [ 23.696861] Yenta: ISA IRQ mask 0x0cb8, PCI irq 21 [ 23.696936] Socket status: 30000006 [ 23.697001] Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a [ 23.697098] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 23.697168] cs: IO port probe 0x3000-0x3fff: clean. [ 23.697573] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff [ 23.697646] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x57ffffff [ 23.736327] ACPI: AC Adapter [ACAD] (on-line) [ 23.914976] acpi device:05: registered as cooling_device1 [ 23.915369] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/input/input9 [ 23.924071] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no) [ 24.424352] ACPI: Battery Slot [BAT1] (battery present) [ 24.906504] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 24.906630] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 25.039815] parport_pc 00:08: reported by Plug and Play ACPI [ 25.039941] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 25.711704] phy0: Selected rate control algorithm 'pid' [ 25.732052] intel8x0_measure_ac97_clock: measured 55215 usecs [ 25.732130] intel8x0: clocking to 48000 [ 25.978759] Registered led device: rt73usb-phy0:radio [ 25.978858] Registered led device: rt73usb-phy0:assoc [ 25.978954] Registered led device: rt73usb-phy0:quality [ 25.979583] usbcore: registered new interface driver rt73usb [ 28.884775] cs: IO port probe 0x100-0x3af: clean. [ 28.886641] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 28.887591] cs: IO port probe 0x820-0x8ff: clean. [ 28.888368] cs: IO port probe 0xc00-0xcf7: clean. [ 28.889342] cs: IO port probe 0xa00-0xaff: clean. [ 28.890763] cs: IO port probe 0x100-0x3af: clean. [ 28.892659] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 28.893610] cs: IO port probe 0x820-0x8ff: clean. [ 28.894357] cs: IO port probe 0xc00-0xcf7: clean. [ 28.895330] cs: IO port probe 0xa00-0xaff: clean. [ 29.924710] lp0: using parport0 (interrupt-driven). [ 30.164661] Adding 1453840k swap on /dev/sda5. Priority:-1 extents:1 across:1453840k [ 30.647091] EXT3 FS on sda1, internal journal [ 31.476157] type=1505 audit(1230581345.726:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=3995 [ 31.728985] type=1505 audit(1230581345.978:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4000 [ 31.729394] type=1505 audit(1230581345.978:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4000 [ 31.801081] type=1505 audit(1230581346.050:5): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=4004 [ 31.969861] ip_tables: (C) 2000-2006 Netfilter Core Team [ 35.401911] ACPI: WMI: Mapper loaded [ 37.006700] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 39.641693] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 39.641704] apm: overridden by ACPI. [ 40.126931] ppdev: user-space parallel port driver [ 47.943582] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 47.943608] vboxdrv: Successfully done. [ 47.943616] vboxdrv: Found 1 processor cores. [ 47.947171] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 47.947194] vboxdrv: Successfully loaded version 2.0.4_OSE (interface 0x00090000). [ 48.660974] tun: Universal TUN/TAP device driver, 1.6 [ 48.661000] tun: (C) 1999-2004 Max Krasnyansky [ 56.088291] [drm] Initialized drm 1.1.0 20060810 [ 56.120025] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 56.120042] pci 0000:00:02.0: setting latency timer to 64 [ 56.121440] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 56.121474] pci 0000:00:02.1: setting latency timer to 64 [ 56.124744] [drm] Initialized i915 1.6.0 20060119 on minor 1 [ 56.376592] eth0: link down [ 56.379342] firmware: requesting rt73.bin [ 56.734219] NET: Registered protocol family 17 [ 113.536543] wlan0: authenticate with AP 00:1c:df:0f:c8:ba [ 113.538444] wlan0: authenticated [ 113.538455] wlan0: associate with AP 00:1c:df:0f:c8:ba [ 113.541062] wlan0: RX AssocResp from 00:1c:df:0f:c8:ba (capab=0x411 status=0 aid=1) [ 113.541073] wlan0: associated [ 114.137144] padlock: VIA PadLock not detected. [ 193.928587] ppdev0: registered pardevice [ 193.979758] ppdev0: unregistered pardevice [ 195.992246] ppdev0: registered pardevice [ 196.040618] ppdev0: unregistered pardevice [ 198.156662] ppdev0: registered pardevice [ 198.204250] ppdev0: unregistered pardevice [ 6631.620311] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 6631.798915] usb 4-1: configuration #1 chosen from 1 choice [ 6632.195258] usbcore: registered new interface driver libusual [ 6632.261983] Initializing USB Mass Storage driver... [ 6632.266530] scsi2 : SCSI emulation for USB Mass Storage devices [ 6632.277884] usbcore: registered new interface driver usb-storage [ 6632.278318] USB Mass Storage support registered. [ 6632.278834] usb-storage: device found at 2 [ 6632.278842] usb-storage: waiting for device to settle before scanning [ 6637.277431] usb-storage: device scan complete [ 6637.284451] scsi 2:0:0:0: Direct-Access OLYMPUS FE210/X775 1.00 PQ: 0 ANSI: 0 CCS [ 6637.308476] sd 2:0:0:0: [sdb] 2047815 512-byte hardware sectors (1048 MB) [ 6637.314803] sd 2:0:0:0: [sdb] Write Protect is off [ 6637.314824] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 6637.314834] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 6637.329362] sd 2:0:0:0: [sdb] 2047815 512-byte hardware sectors (1048 MB) [ 6637.335493] sd 2:0:0:0: [sdb] Write Protect is off [ 6637.335512] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 6637.335520] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 6637.336877] sdb: sdb1 [ 6637.345139] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 6637.346002] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 7002.448323] usb 4-1: USB disconnect, address 2 ---------------- xrandr --verbose ---------------- Screen 0: minimum 320 x 200, current 1400 x 1050, maximum 1400 x 1400 VGA disconnected (normal left inverted right x axis y axis) Identifier: 0x3b Timestamp: 53300 Subpixel: unknown Clones: TMDS CRTCs: 0 1 LVDS connected 1400x1050+0+0 (0x3e) normal (normal left inverted right x axis y axis) 0mm x 0mm Identifier: 0x3c Timestamp: 53300 Subpixel: horizontal rgb Clones: CRTC: 1 CRTCs: 1 BACKLIGHT_CONTROL: kernel supported: native legacy combination kernel BACKLIGHT: 5 (0x00000005) range: (0,5) 1400x1050 (0x3e) 108.0MHz *current +preferred h: width 1400 start 1416 end 1528 total 1688 skew 0 clock 64.0KHz v: height 1050 start 1051 end 1054 total 1066 clock 60.0Hz 1400x1050 (0x3f) 179.3MHz -HSync +VSync h: width 1400 start 1504 end 1656 total 1912 skew 0 clock 93.8KHz v: height 1050 start 1051 end 1054 total 1103 clock 85.0Hz 1400x1050 (0x40) 155.8MHz +HSync +VSync h: width 1400 start 1464 end 1784 total 1912 skew 0 clock 81.5KHz v: height 1050 start 1052 end 1064 total 1090 clock 74.8Hz 1400x1050 (0x41) 145.1MHz -HSync +VSync h: width 1400 start 1496 end 1648 total 1896 skew 0 clock 76.5KHz v: height 1050 start 1051 end 1054 total 1093 clock 70.0Hz 1400x1050 (0x42) 122.0MHz +HSync +VSync h: width 1400 start 1488 end 1640 total 1880 skew 0 clock 64.9KHz v: height 1050 start 1052 end 1064 total 1082 clock 60.0Hz 1280x1024 (0x43) 157.5MHz +HSync +VSync h: width 1280 start 1344 end 1504 total 1728 skew 0 clock 91.1KHz v: height 1024 start 1025 end 1028 total 1072 clock 85.0Hz 1280x1024 (0x44) 135.0MHz +HSync +VSync h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 80.0KHz v: height 1024 start 1025 end 1028 total 1066 clock 75.0Hz 1280x1024 (0x45) 108.0MHz +HSync +VSync h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz 1280x960 (0x46) 148.5MHz +HSync +VSync h: width 1280 start 1344 end 1504 total 1728 skew 0 clock 85.9KHz v: height 960 start 961 end 964 total 1011 clock 85.0Hz 1280x960 (0x47) 108.0MHz +HSync +VSync h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.0KHz v: height 960 start 961 end 964 total 1000 clock 60.0Hz 1360x768 (0x48) 84.8MHz -HSync +VSync h: width 1360 start 1432 end 1568 total 1776 skew 0 clock 47.7KHz v: height 768 start 771 end 781 total 798 clock 59.8Hz 1152x864 (0x49) 143.5MHz -HSync +VSync h: width 1152 start 1232 end 1360 total 1568 skew 0 clock 91.5KHz v: height 864 start 865 end 868 total 915 clock 100.0Hz 1152x864 (0x4a) 121.5MHz +HSync -VSync h: width 1152 start 1216 end 1344 total 1568 skew 0 clock 77.5KHz v: height 864 start 865 end 868 total 911 clock 85.1Hz 1152x864 (0x4b) 119.7MHz -HSync +VSync h: width 1152 start 1224 end 1352 total 1552 skew 0 clock 77.1KHz v: height 864 start 865 end 868 total 907 clock 85.0Hz 1152x864 (0x4c) 108.0MHz +HSync +VSync h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.5KHz v: height 864 start 865 end 868 total 900 clock 75.0Hz 1152x864 (0x4d) 105.0MHz -HSync +VSync h: width 1152 start 1224 end 1352 total 1552 skew 0 clock 67.6KHz v: height 864 start 865 end 868 total 902 clock 75.0Hz 1152x864 (0x4e) 96.8MHz -HSync +VSync h: width 1152 start 1224 end 1344 total 1536 skew 0 clock 63.0KHz v: height 864 start 865 end 868 total 900 clock 70.0Hz 1152x864 (0x4f) 81.6MHz -HSync +VSync h: width 1152 start 1216 end 1336 total 1520 skew 0 clock 53.7KHz v: height 864 start 865 end 868 total 895 clock 60.0Hz 1024x768 (0x50) 94.5MHz +HSync +VSync h: width 1024 start 1072 end 1168 total 1376 skew 0 clock 68.7KHz v: height 768 start 769 end 772 total 808 clock 85.0Hz 1024x768 (0x51) 78.8MHz +HSync +VSync h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.0KHz v: height 768 start 769 end 772 total 800 clock 75.0Hz 1024x768 (0x52) 75.0MHz -HSync -VSync h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.5KHz v: height 768 start 771 end 777 total 806 clock 70.1Hz 1024x768 (0x53) 65.0MHz -HSync -VSync h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz v: height 768 start 771 end 777 total 806 clock 60.0Hz 832x624 (0x54) 57.3MHz -HSync -VSync h: width 832 start 864 end 928 total 1152 skew 0 clock 49.7KHz v: height 624 start 625 end 628 total 667 clock 74.6Hz 800x600 (0x55) 56.3MHz +HSync +VSync h: width 800 start 832 end 896 total 1048 skew 0 clock 53.7KHz v: height 600 start 601 end 604 total 631 clock 85.1Hz 800x600 (0x56) 50.0MHz +HSync +VSync h: width 800 start 856 end 976 total 1040 skew 0 clock 48.1KHz v: height 600 start 637 end 643 total 666 clock 72.2Hz 800x600 (0x57) 49.5MHz +HSync +VSync h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz v: height 600 start 601 end 604 total 625 clock 75.0Hz 800x600 (0x58) 40.0MHz +HSync +VSync h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz v: height 600 start 601 end 605 total 628 clock 60.3Hz 800x600 (0x59) 36.0MHz +HSync +VSync h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz v: height 600 start 601 end 603 total 625 clock 56.2Hz 640x480 (0x5a) 36.0MHz -HSync -VSync h: width 640 start 696 end 752 total 832 skew 0 clock 43.3KHz v: height 480 start 481 end 484 total 509 clock 85.0Hz 640x480 (0x5b) 31.5MHz -HSync -VSync h: width 640 start 664 end 704 total 832 skew 0 clock 37.9KHz v: height 480 start 489 end 492 total 520 clock 72.8Hz 640x480 (0x5c) 31.5MHz -HSync -VSync h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz v: height 480 start 481 end 484 total 500 clock 75.0Hz 640x480 (0x5d) 25.2MHz -HSync -VSync h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz v: height 480 start 490 end 492 total 525 clock 59.9Hz 720x400 (0x5e) 35.5MHz -HSync +VSync h: width 720 start 756 end 828 total 936 skew 0 clock 37.9KHz v: height 400 start 401 end 404 total 446 clock 85.0Hz 640x400 (0x5f) 31.5MHz -HSync +VSync h: width 640 start 672 end 736 total 832 skew 0 clock 37.9KHz v: height 400 start 401 end 404 total 445 clock 85.1Hz 640x350 (0x60) 31.5MHz +HSync -VSync h: width 640 start 672 end 736 total 832 skew 0 clock 37.9KHz v: height 350 start 382 end 385 total 445 clock 85.1Hz TMDS disconnected (normal left inverted right x axis y axis) Identifier: 0x3d Timestamp: 53300 Subpixel: horizontal rgb Clones: VGA CRTCs: 0 1