# Xorg configuration created by system-config-display

Section "ServerLayout"
	Identifier     "single head configuration"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the 
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
	Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr_CH"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
        # Block type: 2:0 3:fe
        # Block type: 2:0 3:fe
        Identifier "SEC:5034"
        VendorName "SEC"
        ModelName "DELL Latitude D610 Flat panel"
        # Block type: 2:0 3:fe
        # Block type: 2:0 3:fe
        # DPMS capabilities: Active off:no  Suspend:no  Standby:no

 #       Mode    "1400x1050"     # vfreq 60.020Hz, hfreq 63.981kHz
 #               DotClock        108.000000
 #               HTimings        1400 1448 1560 1688
 #               VTimings        1050 1051 1055 1066
 #               Flags   "-HSync" "-VSync"
 #       EndMode
	
#        Mode    "1400x1050"     # vfreq 50.000Hz, hfreq 53.300kHz
#                DotClock        89.970000
#                HTimings        1400 1448 1560 1688
#                VTimings        1050 1051 1055 1066
#                Flags   "-HSync" "-VSync"
#        EndMode

	Modeline "1400x1050" 108.000 1400 1448 1560 1688 1050 1051 1055 1066 -hsync -vsync
	# Block type: 2:0 3:fe
        # Block type: 2:0 3:fe
EndSection


Section "Device"
	#BusID "00:02.00"
	Identifier  "Videocard0"
	Driver      "i810"
	VendorName  "Videocard vendor"
	BoardName   "Intel 915"
	VideoRam    65536
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "SEC:5034"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1400x1050"
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection