Linux version 2.6.29-tmb-desktop-0.rc6.1.2mdv (mandrake@seggie.mandriva.com) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Tue Feb 24 12:05:04 EST 2009 Command line: BOOT_IMAGE=2.6.29-tmb-desktoprc6-1.2 root=UUID=3efbcd9f-a068-48e0-9238-09d2af09b870 resume2=swap:/dev/vg-primary/lv-swap splash=silent vga=788 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000007f6d3400 (usable) BIOS-e820: 000000007f6d3400 - 0000000080000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved) BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0x7f6d3 max_arch_pfn = 0x100000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping: 0000000000000000-000000007f6d3000 0000000000 - 007f600000 page 2M 007f600000 - 007f6d3000 page 4k kernel direct mapping tables up to 7f6d3000 @ 8000-c000 last_map_addr: 7f6d3000 end: 7f6d3000 RAMDISK: 37b90000 - 37fef424 ACPI: RSDP 000FC1D0, 0014 (r0 DELL ) ACPI: RSDT 7F6D39CD, 0040 (r1 DELL M07 27D7060D ASL 61) ACPI: FACP 7F6D4800, 0074 (r1 DELL M07 27D7060D ASL 61) FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT 7F6D5400, 4766 (r1 INT430 SYSFexxx 1001 INTL 20050624) ACPI: FACS 7F6E3C00, 0040 ACPI: HPET 7F6D4F00, 0038 (r1 DELL M07 1 ASL 61) ACPI: APIC 7F6D5000, 0068 (r1 DELL M07 27D7060D ASL 47) ACPI: MCFG 7F6D4FC0, 003E (r16 DELL M07 27D7060D ASL 61) ACPI: SLIC 7F6D509C, 0176 (r1 DELL M07 27D7060D ASL 61) ACPI: BOOT 7F6D4BC0, 0028 (r1 DELL M07 27D7060D ASL 61) ACPI: SSDT 7F6D3A0D, 04DC (r1 PmRef CpuPm 3000 INTL 20050624) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000007f6d3000 Bootmem setup node 0 0000000000000000-000000007f6d3000 NODE_DATA [0000000000001000 - 0000000000005fff] bootmap [000000000000a000 - 0000000000019edf] pages 10 (6 early reservations) ==> bootmem [0000000000 - 007f6d3000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000809e50] TEXT DATA BSS ==> [0000200000 - 0000809e50] #3 [0037b90000 - 0037fef424] RAMDISK ==> [0037b90000 - 0037fef424] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007f6d3 On node 0 totalpages: 521842 DMA zone: 56 pages used for memmap DMA zone: 1647 pages reserved DMA zone: 2296 pages, LIFO batch:0 DMA32 zone: 7080 pages used for memmap DMA32 zone: 510763 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Allocating 53248 bytes of per cpu data Built 1 zonelists in Node order, mobility grouping on. Total pages: 513059 Policy zone: DMA32 Kernel command line: BOOT_IMAGE=2.6.29-tmb-desktoprc6-1.2 root=UUID=3efbcd9f-a068-48e0-9238-09d2af09b870 resume2=swap:/dev/vg-primary/lv-swap splash=silent vga=788 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC: PIT calibration matches PMTIMER. 2 loops Detected 1995.011 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 2047756k/2087756k available (3185k kernel code, 388k absent, 39612k reserved, 1696k data, 536k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.02 BogoMIPS (lpj=1995011) Security Framework initialized Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K [ds] using Core 2/Atom configuration CPU 0/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20081204 ACPI: Checking initramfs for custom DSDT Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3989.21 BogoMIPS (lpj=1994605) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K [ds] using Core 2/Atom configuration CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: Measured 4050404232 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to check_tsc_sync_source failed Brought up 2 CPUs Total of 2 processors activated (7979.23 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 1840 bytes Booting paravirtualized kernel on bare hardware regulator: core version 0.5 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: MCFG area at f0000000 reserved in E820 PCI: Using MMCONFIG at f0000000 - f3ffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 32bit mmio: [0xeff00000-0xeff7ffff] pci 0000:00:02.0: reg 14 io port: [0xeff8-0xefff] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff] pci 0000:00:02.0: reg 1c 32bit mmio: [0xefec0000-0xefefffff] pci 0000:00:02.1: reg 10 32bit mmio: [0xeff80000-0xefffffff] pci 0000:00:1b.0: reg 10 64bit mmio: [0xefebc000-0xefebffff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f] pci 0000:00:1d.1: reg 20 io port: [0xbf60-0xbf7f] pci 0000:00:1d.2: reg 20 io port: [0xbf40-0xbf5f] pci 0000:00:1d.3: reg 20 io port: [0xbf20-0xbf3f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80000-0xffa803ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) pci 0000:00:1f.2: reg 10 io port: [0x1f0-0x1f7] pci 0000:00:1f.2: reg 14 io port: [0x3f4-0x3f7] pci 0000:00:1f.2: reg 18 io port: [0x170-0x177] pci 0000:00:1f.2: reg 1c io port: [0x374-0x377] pci 0000:00:1f.2: reg 20 io port: [0xbfa0-0xbfaf] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df] pci 0000:0b:00.0: reg 10 32bit mmio: [0xefdff000-0xefdfffff] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold pci 0000:0b:00.0: PME# disabled pci 0000:0b:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.0: bridge 32bit mmio: [0xefd00000-0xefdfffff] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff] pci 0000:00:1c.3: bridge 32bit mmio: [0xefa00000-0xefcfffff] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe0000000-0xe01fffff] pci 0000:03:00.0: reg 10 32bit mmio: [0xef9fe000-0xef9fffff] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:03:01.0: reg 10 32bit mmio: [0xef9fd800-0xef9fdfff] pci 0000:03:01.0: supports D1 D2 pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.0: PME# disabled pci 0000:03:01.1: reg 10 32bit mmio: [0xef9fd400-0xef9fd4ff] pci 0000:03:01.1: supports D1 D2 pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.1: PME# disabled pci 0000:03:01.2: reg 10 32bit mmio: [0xef9fd500-0xef9fd5ff] pci 0000:03:01.2: supports D1 D2 pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.2: PME# disabled pci 0000:03:01.3: reg 10 32bit mmio: [0xef9fd600-0xef9fd6ff] pci 0000:03:01.3: supports D1 D2 pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.3: PME# disabled pci 0000:03:01.4: reg 10 32bit mmio: [0xef9fd700-0xef9fd7ff] pci 0000:03:01.4: supports D1 D2 pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.4: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xef900000-0xef9fffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4 ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:03: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:03: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9fbff could not be reserved system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xcffff has been reserved system 00:00: iomem range 0xe0000-0xfffff has been reserved system 00:00: iomem range 0x100000-0x7f6d33ff could not be reserved system 00:00: iomem range 0x7f6d3400-0x7f6fffff has been reserved system 00:00: iomem range 0x7f700000-0x7f7fffff has been reserved system 00:00: iomem range 0x7f700000-0x7fefffff could not be reserved system 00:00: iomem range 0xffb00000-0xffffffff has been reserved system 00:00: iomem range 0xfec00000-0xfec0ffff has been reserved system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved system 00:00: iomem range 0xfed20000-0xfed9ffff has been reserved system 00:00: iomem range 0xffa80000-0xffa83fff could not be reserved system 00:00: iomem range 0xf4000000-0xf4003fff has been reserved system 00:00: iomem range 0xf4004000-0xf4004fff has been reserved system 00:00: iomem range 0xf4005000-0xf4005fff has been reserved system 00:00: iomem range 0xf4006000-0xf4006fff has been reserved system 00:00: iomem range 0xf4008000-0xf400bfff has been reserved system 00:00: iomem range 0xf0000000-0xf3ffffff has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:03: ioport range 0xf400-0xf4fe has been reserved system 00:03: ioport range 0x1080-0x10bf has been reserved system 00:03: ioport range 0x10c0-0x10df has been reserved system 00:03: ioport range 0x809-0x809 has been reserved system 00:08: ioport range 0xc80-0xcff could not be reserved system 00:08: ioport range 0x910-0x91f has been reserved system 00:08: ioport range 0x920-0x92f has been reserved system 00:08: ioport range 0xcb0-0xcbf has been reserved system 00:08: ioport range 0x930-0x97f has been reserved system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: 0xefd00000-0xefdfffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c pci 0000:00:1c.3: IO window: 0xd000-0xdfff pci 0000:00:1c.3: MEM window: 0xefa00000-0xefcfffff pci 0000:00:1c.3: PREFETCH window: 0x000000e0000000-0x000000e01fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0xef900000-0xef9fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:0b: resource 0 mem: [0x0-0x0] pci_bus 0000:0b: resource 1 mem: [0xefd00000-0xefdfffff] pci_bus 0000:0b: resource 2 mem: [0x0-0x0] pci_bus 0000:0b: resource 3 mem: [0x0-0x0] pci_bus 0000:0c: resource 0 io: [0xd000-0xdfff] pci_bus 0000:0c: resource 1 mem: [0xefa00000-0xefcfffff] pci_bus 0000:0c: resource 2 mem: [0xe0000000-0xe01fffff] pci_bus 0000:0c: resource 3 mem: [0x0-0x0] pci_bus 0000:03: resource 0 mem: [0x0-0x0] pci_bus 0000:03: resource 1 mem: [0xef900000-0xef9fffff] pci_bus 0000:03: resource 2 mem: [0x0-0x0] pci_bus 0000:03: resource 3 io: [0x00-0xffff] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Clocksource tsc unstable (delta = 2030263626 ns) Freeing initrd memory: 4477k freed Simple Boot Flag at 0x79 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1235595755.816:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 4008 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.3: irq 25 for MSI/MSI-X vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20004980000, using 1875k, total 7872k vesafb: mode is 800x600x16, linelength=1600, pages=7 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 945GM Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered input: AT Translated Set 2 keyboard as /class/input/input1 registered taskstats version 1 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 536k freed SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods libata version 3.00 loaded. ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15 Synaptics Touchpad, model: 1, fw: 6.2, id: 0x180b1, caps: 0xa04713/0x200000 ata1.00: ATA-7: ST9160823AS, 3.AAB, max UDMA/133 ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 isa bounce pool size: 16 pages scsi 0:0:0:0: Direct-Access ATA ST9160823AS 3.AA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk input: SynPS/2 Synaptics TouchPad as /class/input/input2 ata2.00: ATAPI: PHILIPS DVD+/-RW SDVD8820, AD15, max UDMA/33 ata2.00: configured for UDMA/33 scsi 1:0:0:0: CD-ROM PHILIPS DVD+-RW SDVD8820 AD15 PQ: 0 ANSI: 5 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com ohci1394 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[ef9fd800-ef9fdfff] Max Packet=[2048] IR/IT contexts=[4/4] ieee1394: Host added: ID:BUS[0-00:1023] GUID[334fc0001e64c450] EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: WMI: Mapper loaded ACPI: SSDT 7F6D4134, 0244 (r1 PmRef Cpu0Ist 3000 INTL 20050624) ACPI: SSDT 7F6D3EE9, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7F6D4378, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) ACPI: SSDT 7F6D40AF, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: AC Adapter [AC] (on-line) input: Lid Switch as /class/input/input3 ACPI: Lid Switch [LID] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PBTN] input: Sleep Button (CM) as /class/input/input5 ACPI: Sleep Button (CM) [SBTN] sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 ACPI: Battery Slot [BAT0] (battery present) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM] (51 C) rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.29-tmb-desktop-0.rc6.1.2mdv uhci_hcd usb usb1: SerialNumber: 0000:00:1d.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.29-tmb-desktop-0.rc6.1.2mdv uhci_hcd usb usb2: SerialNumber: 0000:00:1d.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.29-tmb-desktop-0.rc6.1.2mdv uhci_hcd usb usb3: SerialNumber: 0000:00:1d.2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.29-tmb-desktop-0.rc6.1.2mdv uhci_hcd usb usb4: SerialNumber: 0000:00:1d.3 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: EHCI Host Controller usb usb5: Manufacturer: Linux 2.6.29-tmb-desktop-0.rc6.1.2mdv ehci_hcd usb usb5: SerialNumber: 0000:00:1d.7 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected ricoh-mmc: Ricoh MMC Controller disabling driver ricoh-mmc: Copyright(c) Philip Langdale ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2 [1180:0843] (rev 1) ricoh-mmc: Controller is now disabled. dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) acpi device:2a: registered as cooling_device2 input: Video Bus as /class/input/input6 ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) ACPI Warning (nspredef-0434): \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) [20081204] input: Video Bus as /class/input/input7 ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1) b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 b44.c:v2.0 eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:15:c5:bd:76:2d usb 4-2: new full speed USB device using uhci_hcd and address 2 intel_rng: FWH not detected usb 4-2: New USB device found, idVendor=413c, idProduct=8126 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: BCM2045 usb 4-2: Manufacturer: Broadcom Corp usb 4-2: configuration #1 chosen from 1 choice iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks iwl3945: Copyright(c) 2003-2008 Intel Corporation iwl3945 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 iwl3945 0000:0b:00.0: setting latency timer to 64 iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels iwl3945: Detected Intel Wireless WiFi Link 3945ABG iwl3945 0000:0b:00.0: PCI INT A disabled wmaster0 (iwl3945): not using net_device_ops yet phy0: Selected rate control algorithm 'iwl-3945-rs' cfg80211: Regulatory domain changed to country: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) Bluetooth: Core ver 2.14 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman Bluetooth: Generic Bluetooth USB driver ver 0.4 usbcore: registered new interface driver btusb wlan0 (iwl3945): not using net_device_ops yet i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 19) sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 HDA Intel 0000:00:1b.0: setting latency timer to 64 input: HDA Intel at 0xefebc000 irq 21 Mic at Ext Right Jack as /class/input/input8 input: HDA Intel at 0xefebc000 irq 21 HP Out at Ext Right Jack as /class/input/input9 Non-volatile memory driver v1.3 EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. loop: module loaded Adding 3145720k swap on /dev/mapper/vg--primary-lv--swap. Priority:-1 extents:1 across:3145720k Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.2 intel_rng: FWH not detected vboxdrv: Trying to deactivate the NMI watchdog permanently... vboxdrv: Successfully done. vboxdrv: Found 2 processor cores. VBoxDrv: dbg - g_abExecMemory=ffffffffa03bab20 vboxdrv: fAsync=1 offMin=0xf16beed4 offMax=0xf16beed4 vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009). VBoxNetFlt: dbg - g_abExecMemory=ffffffffa05579e0 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready CE: hpet increasing min_delta_ns to 15000 nsec iwl3945 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 iwl3945 0000:0b:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) iwl3945 0000:0b:00.0: irq 26 for MSI/MSI-X iwl3945 0000:0b:00.0: firmware: requesting iwlwifi-3945-2.ucode iwl3945 loaded firmware version 15.28.2.8 Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX ADDRCONF(NETDEV_UP): wlan0: link is not ready NET: Registered protocol family 17 wlan0: authenticate with AP 00:18:4d:b5:7e:76 wlan0: authenticated wlan0: associate with AP 00:18:4d:b5:7e:76 wlan0: RX AssocResp from 00:18:4d:b5:7e:76 (capab=0x431 status=0 aid=1) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20080730 on minor 0 RPC: Registered udp transport module. RPC: Registered tcp transport module. X:7337 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining X:7337 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining X:7337 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining X:7337 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining X:8076 freeing invalid memtype d0000000-e0000000 X:7337 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining X:8077 freeing invalid memtype d0000000-e0000000 X:7337 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining X:8078 freeing invalid memtype d0000000-e0000000 wlan0: no IPv6 routers present ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ctnetlink v0.93: registering with nfnetlink. ClusterIP Version 0.8 loaded successfully xt_time: kernel timezone is -0000 netfilter PSD loaded - (c) astaro AG IFWLOG: register target [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 X:7337 freeing invalid memtype d0000000-e0000000 X:7337 freeing invalid memtype d0000000-e0000000 X:12354 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining X:12354 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining X:12354 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining X:12370 freeing invalid memtype d0000000-e0000000 X:12354 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining X:12371 freeing invalid memtype d0000000-e0000000 X:12354 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining X:12372 freeing invalid memtype d0000000-e0000000 X:12354 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining X:12373 freeing invalid memtype d0000000-e0000000 [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0