Using PowerMac machine description
Total memory = 1280MB; using 4096kB for hash table (at cfc00000)
Initializing cgroup subsys cpu
Linux version 2.6.27.15-170.2.24.fc10.ppc (mockbuild@ppc3.fedora.redhat.com) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 Wed Feb 11 22:56:57 EST 2009
Found initrd at 0xc1300000:0xc1745400
Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
Mapped at 0xff7c0000
Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000
Processor NAP mode on idle enabled.
PowerMac motherboard: PowerBook G4 12"
via-pmu: Server Mode is disabled
PMU driver v2 initialized for Core99, firmware: 0c
console [udbg0] enabled
Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
PCI host bridge /pci@f0000000  ranges:
 MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 
  IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
 MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000 
Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
PCI host bridge /pci@f2000000 (primary) ranges:
 MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 
  IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
 MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 
Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
PCI host bridge /pci@f4000000  ranges:
 MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 
  IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
nvram: Checking bank 0...
nvram: gen0=388, gen1=389
nvram: Active bank is: 1
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
Top of RAM: 0x50000000, Total RAM: 0x50000000
Memory hole size: 0MB
Zone PFN ranges:
  DMA      0x00000000 -> 0x00030000
  Normal   0x00030000 -> 0x00030000
  HighMem  0x00030000 -> 0x00050000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00050000
On node 0 totalpages: 327680
free_area_init_node: node 0, pgdat c054a760, node_mem_map c05f5000
  DMA zone: 195072 pages, LIFO batch:31
  HighMem zone: 130048 pages, LIFO batch:31
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 325120
Kernel command line: ro rhgb quiet root=/dev/VolGroup00/LogVol00 video=ofonly
mpic: Setting up MPIC " MPIC 1   " version 1.2 at 80040000, max 4 CPUs
mpic: ISU size: 64, shift: 6, mask: 3f
mpic: Initializing for 64 sources
PID hash table entries: 4096 (order: 12, 16384 bytes)
GMT Delta read from XPRAM: 0 minutes, DST: off
time_init: decrementer frequency = 18.432000 MHz
time_init: processor frequency   = 1499.999994 MHz
clocksource: timebase mult[d9038e4] shift[22] registered
clockevent: decrementer mult[4b7] shift[16] cpu[0]
Console: colour dummy device 80x25
console handover: boot [udbg0] -> real [tty0]
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
High memory: 524288k
Memory: 1283716k/1310720k available (5240k kernel code, 25980k reserved, 192k data, 571k bss, 284k init)
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 36.73 BogoMIPS (lpj=18368)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Mount-cache hash table entries: 512
device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
net_namespace: 832 bytes
NET: Registered protocol family 16
rstcr compatible register does not exist!
KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
 channel 1 bus /uni-n@f8000000/i2c@f8001000/i2c-bus@1
KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
 channel 0 bus /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0
PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
 channel 1 bus <multibus>
 channel 2 bus <multibus>
__ioremap(): phys addr 0x0 is RAM lr c04ef39c
PCI: Probing PCI hardware
PCI: 0000:00:10.0 reg 10 32bit mmio: [91000000, 91ffffff]
PCI: 0000:00:10.0 reg 14 32bit mmio: [a0000000, a7ffffff]
PCI: 0000:00:10.0 reg 30 32bit mmio: [90000000, 9001ffff]
PCI: 0001:10:12.0 reg 10 32bit mmio: [80084000, 80085fff]
pci 0001:10:12.0: supports D1
pci 0001:10:12.0: supports D2
pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0001:10:12.0: PME# disabled
PCI: 0001:10:17.0 reg 10 32bit mmio: [80000000, 8007ffff]
PCI: 0001:10:18.0 reg 10 32bit mmio: [0, fff]
PCI: 0001:10:19.0 reg 10 32bit mmio: [0, fff]
PCI: 0001:10:1a.0 reg 10 32bit mmio: [80083000, 80083fff]
PCI: 0001:10:1b.0 reg 10 32bit mmio: [80082000, 80082fff]
pci 0001:10:1b.0: supports D1
pci 0001:10:1b.0: supports D2
pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0001:10:1b.0: PME# disabled
PCI: 0001:10:1b.1 reg 10 32bit mmio: [80081000, 80081fff]
pci 0001:10:1b.1: supports D1
pci 0001:10:1b.1: supports D2
pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0001:10:1b.1: PME# disabled
PCI: 0001:10:1b.2 reg 10 32bit mmio: [80080000, 800800ff]
pci 0001:10:1b.2: supports D1
pci 0001:10:1b.2: supports D2
pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0001:10:1b.2: PME# disabled
PCI: 0002:20:0d.0 reg 10 32bit mmio: [f5004000, f5007fff]
PCI: 0002:20:0e.0 reg 10 32bit mmio: [f5000000, f5000fff]
pci 0002:20:0e.0: supports D1
pci 0002:20:0e.0: supports D2
pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
pci 0002:20:0e.0: PME# disabled
PCI: 0002:20:0f.0 reg 10 32bit mmio: [f5200000, f53fffff]
PCI: 0002:20:0f.0 reg 30 32bit mmio: [f5100000, f51fffff]
bus: 00 index 0 io port: [802000, 1001fff]
bus: 00 index 1 mmio: [f1000000, f1ffffff]
bus: 00 index 2 mmio: [90000000, afffffff]
bus: 10 index 0 io port: [0, 7fffff]
bus: 10 index 1 mmio: [f3000000, f3ffffff]
bus: 10 index 2 mmio: [80000000, 8fffffff]
bus: 20 index 0 io port: [ff7fe000, ffffdfff]
bus: 20 index 1 mmio: [f5000000, f5ffffff]
Registering qe_ic with sysfs...
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
Switched to high resolution mode on CPU 0
tracer: 772 pages allocated for 65536 entries of 48 bytes
   actual entries 65620
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 4373k freed
Thermal assist unit not available
setup_kcore: restrict size=3fffffff
Registering PowerMac CPU frequency driver
Low: 749 Mhz, High: 1499 Mhz, Boot: 749 Mhz
audit: initializing netlink socket (disabled)
type=2000 audit(1235760983.964:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1493
SELinux:  Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:10.0: nv_msi_ht_cap_quirk didn't locate host bridge
Using unsupported 1920x1200 NVDA,Display-B at a2000000, depth=8, pitch=2048
Console: switching to colour frame buffer device 240x75
fb0: Open Firmware frame buffer device on /pci@f0000000/NVDA,Parent@10/NVDA,Display-B@1
Generic non-volatile memory driver v1.1
Linux agpgart interface v0.103
agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
agpgart-uninorth 0000:00:0b.0: configuring for size idx: 8
agpgart-uninorth 0000:00:0b.0: AGP aperture is 32M @ 0x0
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
Serial: MPC52xx PSC UART driver
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
MacIO PCI driver attached to Intrepid chipset
input: Macintosh mouse button emulation as /devices/virtual/input/input0
apm_emu: PMU APM Emulation initialized.
Uniform Multi-Platform E-IDE driver
ide-pmac 0002:20:0d.0: enabling device (0004 -> 0006)
adb: starting probe task...
adb devices: [2]: 2 c4 [7]: 7 1f
ADB keyboard at 2, handler 1
Detected ADB keyboard, type ISO, swapping keys.
input: ADB keyboard as /devices/virtual/input/input1
input: ADB Powerbook buttons as /devices/virtual/input/input2
adb: finished probe task...
ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39
Probing IDE interface ide0...
hda: WDC WD1600BEVE-11UYT0, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
ide0 at 0xf1022000-0xf1022070,0xf1022160 on irq 39
ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 24
Probing IDE interface ide1...
hdc: MATSHITADVD-R UJ-835E, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: MWDMA2 mode selected
ide1 at 0xf101a000-0xf101a070,0xf101a160 on irq 24
hda: max request size: 512KiB
hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
hda: cache flushes supported
 hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 hda9 hda10 hda11
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ehci_hcd 0001:10:1b.2: enabling device (0004 -> 0006)
ehci_hcd 0001:10:1b.2: EHCI Host Controller
ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 1
ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000
ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27.15-170.2.24.fc10.ppc ehci_hcd
usb usb1: SerialNumber: 0001:10:1b.2
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Apple USB OHCI 0001:10:18.0 disabled by firmware
Apple USB OHCI 0001:10:19.0 disabled by firmware
ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002)
ohci_hcd 0001:10:1a.0: OHCI Host Controller
ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 2
ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-2: new high speed USB device using ehci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 3 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.15-170.2.24.fc10.ppc ohci_hcd
usb usb2: SerialNumber: 0001:10:1a.0
ohci_hcd 0001:10:1b.0: enabling device (0000 -> 0002)
ohci_hcd 0001:10:1b.0: OHCI Host Controller
ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 3
ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
usb 1-2: New USB device found, idVendor=05ac, idProduct=911c
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27.15-170.2.24.fc10.ppc ohci_hcd
usb usb3: SerialNumber: 0001:10:1b.0
ohci_hcd 0001:10:1b.1: enabling device (0000 -> 0002)
ohci_hcd 0001:10:1b.1: OHCI Host Controller
ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4
ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 2-1: new full speed USB device using ohci_hcd and address 2
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27.15-170.2.24.fc10.ppc ohci_hcd
usb usb4: SerialNumber: 0001:10:1b.1
USB Universal Host Controller Interface driver v3.0
mice: PS/2 mouse device common for all mice
platform ppc-rtc.0: rtc core: registered ppc_md as rtc0
PowerMac i2c bus pmu 2 registered
PowerMac i2c bus pmu 1 registered
PowerMac i2c bus mac-io 0 registered
PowerMac i2c bus uni-n 1 registered
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: New USB device found, idVendor=05ac, idProduct=1000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-2: new full speed USB device using ohci_hcd and address 3
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: New USB device found, idVendor=05ac, idProduct=030a
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Apple Internal Trackpad
usb 2-2: Manufacturer: Apple Computer
usb 1-2.1: new low speed USB device using ehci_hcd and address 3
usb 1-2.1: configuration #1 chosen from 1 choice
usb 1-2.1: New USB device found, idVendor=046d, idProduct=c00e
usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.1: Product: USB-PS/2 Optical Mouse
usb 1-2.1: Manufacturer: Logitech
usb 1-2.2: new full speed USB device using ehci_hcd and address 4
usb 1-2.2: configuration #1 chosen from 1 choice
usb 1-2.2: New USB device found, idVendor=05ac, idProduct=921c
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: Apple Cinema HD Display
usb 1-2.2: Manufacturer: Apple Computer, Inc.
usb 1-2.3: new full speed USB device using ehci_hcd and address 5
usb 1-2.3: configuration #1 chosen from 1 choice
hub 1-2.3:1.0: USB hub found
hub 1-2.3:1.0: 3 ports detected
usb 1-2.3: New USB device found, idVendor=05ac, idProduct=1003
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: Hub in Apple Extended USB Keyboard
usb 1-2.3: Manufacturer: Mitsumi Electric
usb 1-2.3.3: new full speed USB device using ehci_hcd and address 6
usb 1-2.3.3: configuration #1 chosen from 1 choice
usb 1-2.3.3: New USB device found, idVendor=05ac, idProduct=020c
usb 1-2.3.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-2.3.3: Product: Apple Extended USB Keyboard
usb 1-2.3.3: Manufacturer: Mitsumi Electric
usbcore: registered new interface driver hiddev
input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.0/input/input3
input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1
input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.1/input/input4
input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2.1/1-2.1:1.0/input/input5
input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0001:10:1b.2-2.1
hiddev96hidraw3: USB HID v1.11 Device [Apple Computer, Inc. Apple Cinema HD Display] on usb-0001:10:1b.2-2.2
input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.0/input/input6
input,hidraw4: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:1b.2-2.3.3
input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.1/input/input7
input,hidraw5: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:1b.2-2.3.3
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
input: PMU as /devices/virtual/input/input8
Registered led device: pmu-front-led
Freeing unused kernel memory: 284k init
firewire_ohci 0002:20:0e.0: enabling device (0000 -> 0002)
firewire_ohci: Added fw-ohci device 0002:20:0e.0, OHCI version 1.10
firewire_core: created device fw0: GUID 001124fffe871160, S400
scsi0 : SBP-2 IEEE-1394
firewire_sbp2: Workarounds for fw1.0: 0x20 (firmware_revision 0x012804, model_id 0x000001)
firewire_core: created device fw1: GUID 0050770e00071002, S400
firewire_core: phy config: card 0, new root=ffc1, gap_count=5
firewire_sbp2: fw1.0: logged in to LUN 0000 (0 retries)
scsi 0:0:0:0: Direct-Access-RBC WDC WD80 0JB-00JJA0            PQ: 0 ANSI: 4
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 11 00 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 11 00 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: [mac] sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 14
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1235761012.214:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 114414 rules.
SELinux: 8192 avtab hash slots, 114414 rules.
SELinux:  8 users, 11 roles, 2673 types, 121 bools, 1 sens, 1024 cats
SELinux:  73 classes, 114414 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1235761013.119:3): policy loaded auid=4294967295 ses=4294967295
udevd version 127 started
b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006)
ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
input: appletouch as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.0/input/input9
usbcore: registered new interface driver appletouch
sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
PHY ID: 4061e4, addr: 0
eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:11:24:87:11:60
eth0: Found BCM5221 PHY
b43-phy0: Broadcom 4306 WLAN found
b43-phy0 debug: Found PHY: Analog 2, Type 2, Revision 2
b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
phy0: Selected rate control algorithm 'pid'
Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
snd-aoa-fabric-layout: found bus with layout 72
snd-aoa-fabric-layout: Using PMF GPIOs
snd-aoa-codec-tas: found tas3004
snd-aoa-fabric-layout: can use this codec
snd-aoa-codec-tas: tas found, addr 0x35 on /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0/codec@6a
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda3, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 2588664k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2588664k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
ADDRCONF(NETDEV_UP): eth0: link is not ready
input: b43-phy0 as /devices/virtual/input/input10
firmware: requesting b43/ucode5.fw
firmware: requesting b43/pcm5.fw
firmware: requesting b43/b0g0initvals5.fw
firmware: requesting b43/b0g0bsinitvals5.fw
b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
b43-phy0 debug: Chip initialized
b43-phy0 debug: 30-bit DMA initialized
Registered led device: b43-phy0::tx
Registered led device: b43-phy0::rx
Registered led device: b43-phy0::radio
b43-phy0 debug: Wireless interface started
b43-phy0 debug: Adding Interface type 2
ADDRCONF(NETDEV_UP): wlan0: link is not ready
[drm] Initialized drm 1.1.0 20060810
[drm] Detected an NV30 generation card (0x034900b1)
[drm] Initialized nouveau 0.0.11 20060213 on minor 0
[drm] OF bios successfully copied (2947 bytes)
[drm] OF bios successfully copied (2947 bytes)
[drm] OF bios successfully copied (2947 bytes)
[drm] OF bios successfully copied (2947 bytes)
[drm] Allocating FIFO number 0
[drm] nouveau_fifo_alloc: initialised FIFO 0
[drm] Allocating FIFO number 1
[drm] nouveau_fifo_alloc: initialised FIFO 1