[ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800 [ 0.000000] Linux version 2.6.28-gentoo-r2-evil-inside (root@Eternity) (gcc version 4.3.3 (Gentoo 4.3.3 p1.0, pie-10.1.5) ) #5 SMP PREEMPT Sat Mar 7 19:10:56 Local time zone must be set--s [ 0.000000] Command line: root=/dev/sda5 softlevel=mobile resume=/dev/sda2 init=/sbin/bootchartd video=intelfb:1280x800-32@60 vga=792 console=tty1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable) [ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6e3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7f6d0 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] init_memory_mapping: 0000000000000000-000000007f6d0000 [ 0.000000] 0000000000 - 007f600000 page 2M [ 0.000000] 007f600000 - 007f6d0000 page 4k [ 0.000000] kernel direct mapping tables up to 7f6d0000 @ 8000-c000 [ 0.000000] last_map_addr: 7f6d0000 end: 7f6d0000 [ 0.000000] ACPI: RSDP 000F77C0, 0024 (r2 TOSQCI) [ 0.000000] ACPI: XSDT 7F6D55C8, 0074 (r1 TOSQCI TOSQCI00 6040000 LTP 0) [ 0.000000] ACPI: FACP 7F6DFC92, 00F4 (r3 TOSQCI TOSQCI00 6040000 ALAN 1) [ 0.000000] ACPI: DSDT 7F6D69EF, 922F (r2 TOSQCI N.Jersey 6040000 MSFT 3000001) [ 0.000000] ACPI: FACS 7F6E2FC0, 0040 [ 0.000000] ACPI: HPET 7F6DFD86, 0038 (r1 TOSQCI TOSQCI00 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 7F6DFDBE, 003C (r1 TOSQCI TOSQCI00 6040000 LOHR 5A) [ 0.000000] ACPI: APIC 7F6DFDFA, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 7F6DFE62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SLIC 7F6DFE8A, 0176 (r1 TOSQCI TOSQCI00 6040000 LTP 0) [ 0.000000] ACPI: SSDT 7F6D6742, 02AD (r1 SataRe SataAhci 1000 INTL 20061109) [ 0.000000] ACPI: SSDT 7F6D5BC8, 025F (r1 PmRef Cpu0Tst 3000 INTL 20061109) [ 0.000000] ACPI: SSDT 7F6D5B22, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20061109) [ 0.000000] ACPI: SSDT 7F6D563C, 04E6 (r1 PmRef CpuPm 3000 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 007f6d0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00022e5ef8] TEXT DATA BSS ==> [0001000000 - 00022e5ef8] [ 0.000000] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] found SMP MP-table at [ffff8800000f7870] 000f7870 [ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880002400000-ffff880003ffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007f6d0 [ 0.000000] On node 0 totalpages: 521839 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 103 pages reserved [ 0.000000] DMA zone: 3840 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7080 pages used for memmap [ 0.000000] DMA32 zone: 510760 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] PERCPU: Allocating 1626112 bytes of per cpu data [ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 514600 [ 0.000000] Kernel command line: root=/dev/sda5 softlevel=mobile resume=/dev/sda2 init=/sbin/bootchartd video=intelfb:1280x800-32@60 vga=792 console=tty1 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1662.529 MHz processor. [ 0.010000] Console: colour dummy device 80x25 [ 0.010000] console [tty1] enabled [ 0.010000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.010000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.010000] ... MAX_LOCK_DEPTH: 48 [ 0.010000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.010000] ... CLASSHASH_SIZE: 4096 [ 0.010000] ... MAX_LOCKDEP_ENTRIES: 8192 [ 0.010000] ... MAX_LOCKDEP_CHAINS: 16384 [ 0.010000] ... CHAINHASH_SIZE: 8192 [ 0.010000] memory used by lock dependency info: 4095 kB [ 0.010000] per task-struct memory footprint: 2688 bytes [ 0.010000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.010000] Checking aperture... [ 0.010000] No AGP bridge found [ 0.010000] Memory: 2032216k/2087744k available (6716k kernel code, 388k absent, 54520k reserved, 3431k data, 1980k init) [ 0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.010000] hpet clockevent registered [ 0.010000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.05 BogoMIPS (lpj=16625290) [ 0.010000] Security Framework initialized [ 0.010000] SELinux: Disabled at boot. [ 0.010000] Mount-cache hash table entries: 256 [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 2048K [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 0 [ 0.010000] CPU0: Thermal monitoring handled by SMI [ 0.010000] using mwait in idle threads. [ 0.010000] ACPI: Core revision 20080926 [ 0.030171] Setting APIC routing to flat [ 0.040383] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.140420] CPU0: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz stepping 0d [ 0.150000] lockdep: fixing up alternatives. [ 0.150000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 3325.01 BogoMIPS (lpj=16625088) [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 2048K [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] CPU1: Thermal monitoring enabled (TM2) [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.301506] CPU1: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz stepping 0d [ 0.301579] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.310070] Brought up 2 CPUs [ 0.310078] Total of 2 processors activated (6650.07 BogoMIPS). [ 0.310209] CPU0 attaching sched-domain: [ 0.310213] domain 0: span 0-1 level MC [ 0.310217] groups: 0 1 [ 0.310245] CPU1 attaching sched-domain: [ 0.310248] domain 0: span 0-1 level MC [ 0.310251] groups: 1 0 [ 0.310475] net_namespace: 1528 bytes [ 0.310475] Booting paravirtualized kernel on bare hardware [ 0.310668] NET: Registered protocol family 16 [ 0.310668] ACPI: bus type pci registered [ 0.310668] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.310668] PCI: MCFG area at e0000000 reserved in E820 [ 0.373367] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.373374] PCI: Using configuration type 1 for base access [ 0.407292] ACPI: EC: Look up EC in DSDT [ 0.425603] ACPI: BIOS _OSI(Linux) query ignored [ 0.426796] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.920032] ACPI: EC: missing confirmations, switch off interrupt mode. [ 0.930000] ACPI: Interpreter enabled [ 0.930000] ACPI: (supports S0 S3 S4 S5) [ 0.930039] ACPI: Using IOAPIC for interrupt routing [ 0.951596] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.951596] ACPI: EC: driver started in poll mode [ 0.951596] ACPI: No dock devices found. [ 0.951596] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.951596] pci 0000:00:02.0: reg 10 64bit mmio: [0xf0000000-0xf00fffff] [ 0.951596] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] [ 0.951596] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] [ 0.951596] pci 0000:00:02.1: reg 10 64bit mmio: [0xf0100000-0xf01fffff] [ 0.951596] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f] [ 0.951596] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f] [ 0.951596] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf0704800-0xf0704bff] [ 0.951596] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.951596] pci 0000:00:1a.7: PME# disabled [ 0.951596] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0700000-0xf0703fff] [ 0.951596] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.951596] pci 0000:00:1b.0: PME# disabled [ 0.951596] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.951596] pci 0000:00:1c.0: PME# disabled [ 0.951596] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.951602] pci 0000:00:1c.1: PME# disabled [ 0.951753] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.951767] pci 0000:00:1c.2: PME# disabled [ 0.951918] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.951932] pci 0000:00:1c.3: PME# disabled [ 0.952072] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] [ 0.952203] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] [ 0.952334] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] [ 0.952475] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0704c00-0xf0704fff] [ 0.952572] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.952587] pci 0000:00:1d.7: PME# disabled [ 0.952906] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.952921] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.953001] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.953016] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.953031] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.953046] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.953061] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] [ 0.953212] pci 0000:00:1f.2: reg 10 io port: [0x1c00-0x1c07] [ 0.953228] pci 0000:00:1f.2: reg 14 io port: [0x18d4-0x18d7] [ 0.953243] pci 0000:00:1f.2: reg 18 io port: [0x18d8-0x18df] [ 0.953258] pci 0000:00:1f.2: reg 1c io port: [0x18d0-0x18d3] [ 0.953273] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] [ 0.953289] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0704000-0xf07047ff] [ 0.953330] pci 0000:00:1f.2: PME# supported from D3hot [ 0.953343] pci 0000:00:1f.2: PME# disabled [ 0.953417] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] [ 0.953469] pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f] [ 0.953804] pci 0000:03:00.0: reg 10 io port: [0x2000-0x20ff] [ 0.953854] pci 0000:03:00.0: reg 18 64bit mmio: [0xf0300000-0xf0300fff] [ 0.953904] pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.953932] pci 0000:03:00.0: supports D1 D2 [ 0.953935] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.953951] pci 0000:03:00.0: PME# disabled [ 0.954092] pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff] [ 0.954101] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0300000-0xf03fffff] [ 0.954270] pci 0000:04:00.0: reg 10 64bit mmio: [0xf0200000-0xf0201fff] [ 0.954390] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.954407] pci 0000:04:00.0: PME# disabled [ 0.954566] pci 0000:00:1c.2: bridge 32bit mmio: [0xf0200000-0xf02fffff] [ 0.954707] pci 0000:00:1c.3: bridge io port: [0x00-0xfff] [ 0.954716] pci 0000:00:1c.3: bridge 32bit mmio: [0x000000-0x0fffff] [ 0.954731] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x000000-0x0fffff] [ 0.954828] pci 0000:0a:01.0: reg 10 32bit mmio: [0xf0400000-0xf04007ff] [ 0.954926] pci 0000:0a:01.0: supports D1 D2 [ 0.954929] pci 0000:0a:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.954944] pci 0000:0a:01.0: PME# disabled [ 0.955035] pci 0000:0a:01.1: reg 10 32bit mmio: [0xf0400800-0xf04008ff] [ 0.955133] pci 0000:0a:01.1: supports D1 D2 [ 0.955136] pci 0000:0a:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.955150] pci 0000:0a:01.1: PME# disabled [ 0.955247] pci 0000:0a:01.2: reg 10 32bit mmio: [0xf0400c00-0xf0400cff] [ 0.955346] pci 0000:0a:01.2: supports D1 D2 [ 0.955349] pci 0000:0a:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.955364] pci 0000:0a:01.2: PME# disabled [ 0.955456] pci 0000:0a:01.3: reg 10 32bit mmio: [0xf0401000-0xf04010ff] [ 0.955556] pci 0000:0a:01.3: supports D1 D2 [ 0.955558] pci 0000:0a:01.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.955573] pci 0000:0a:01.3: PME# disabled [ 0.955664] pci 0000:0a:01.4: reg 10 32bit mmio: [0xf0401400-0xf04014ff] [ 0.955764] pci 0000:0a:01.4: supports D1 D2 [ 0.955767] pci 0000:0a:01.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.955781] pci 0000:0a:01.4: PME# disabled [ 0.955915] pci 0000:00:1e.0: transparent bridge [ 0.960017] pci 0000:00:1e.0: bridge 32bit mmio: [0xf0400000-0xf04fffff] [ 0.960097] bus 00 -> node 0 [ 0.960110] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.961138] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.961466] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.961794] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.962121] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.962531] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 1.002524] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 1.002784] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 1.003039] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 1.003297] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 1.003571] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 1.003828] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 1.004081] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 1.004332] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 1.005186] SCSI subsystem initialized [ 1.005186] libata version 3.00 loaded. [ 1.005186] usbcore: registered new interface driver usbfs [ 1.005186] usbcore: registered new interface driver hub [ 1.005186] usbcore: registered new device driver usb [ 1.005186] PCI: Using ACPI for IRQ routing [ 1.005186] pci 0000:00:1c.3: BAR 7: can't allocate resource [ 1.005186] pci 0000:00:1c.3: BAR 8: can't allocate resource [ 1.005186] pci 0000:00:1c.3: BAR 9: can't allocate resource [ 1.050245] Bluetooth: Core ver 2.13 [ 1.050282] NET: Registered protocol family 31 [ 1.050282] Bluetooth: HCI device and connection manager initialized [ 1.050282] Bluetooth: HCI socket layer initialized [ 1.080105] cfg80211: Using static regulatory domain info [ 1.080105] cfg80211: Regulatory domain: US [ 1.080105] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1.080105] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 1.080105] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 1.080105] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 1.080105] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 1.080105] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 1.080105] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 1.080105] cfg80211: Calling CRDA for country: US [ 1.080144] NetLabel: Initializing [ 1.080144] NetLabel: domain hash size = 128 [ 1.080144] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.080144] NetLabel: unlabeled traffic allowed by default [ 1.080187] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.080187] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 1.100015] Switched to high resolution mode on CPU 0 [ 1.101643] Switched to high resolution mode on CPU 1 [ 1.130032] pnp: PnP ACPI init [ 1.130080] ACPI: bus type pnp registered [ 1.136618] pnp: PnP ACPI: found 9 devices [ 1.136628] ACPI: ACPI bus type pnp unregistered [ 1.136661] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 1.136672] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 1.136683] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 1.136693] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 1.136703] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 1.136713] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 1.136727] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved [ 1.136738] system 00:01: iomem range 0xff80000-0xff8ffff could not be reserved [ 1.136768] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved [ 1.136797] system 00:05: ioport range 0x800-0x80f has been reserved [ 1.136807] system 00:05: ioport range 0x1000-0x107f has been reserved [ 1.136816] system 00:05: ioport range 0x1180-0x11bf has been reserved [ 1.136826] system 00:05: ioport range 0xfe00-0xfe00 has been reserved [ 1.142236] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 1.142245] pci 0000:00:1c.0: IO window: disabled [ 1.142262] pci 0000:00:1c.0: MEM window: disabled [ 1.142275] pci 0000:00:1c.0: PREFETCH window: disabled [ 1.142296] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 1.142308] pci 0000:00:1c.1: IO window: 0x2000-0x2fff [ 1.142324] pci 0000:00:1c.1: MEM window: 0xf0300000-0xf03fffff [ 1.142339] pci 0000:00:1c.1: PREFETCH window: 0x00000088000000-0x000000880fffff [ 1.142361] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 1.142369] pci 0000:00:1c.2: IO window: disabled [ 1.142385] pci 0000:00:1c.2: MEM window: 0xf0200000-0xf02fffff [ 1.142399] pci 0000:00:1c.2: PREFETCH window: disabled [ 1.142418] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 [ 1.142426] pci 0000:00:1c.3: IO window: disabled [ 1.142441] pci 0000:00:1c.3: MEM window: disabled [ 1.142454] pci 0000:00:1c.3: PREFETCH window: disabled [ 1.142474] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a [ 1.142482] pci 0000:00:1e.0: IO window: disabled [ 1.142498] pci 0000:00:1e.0: MEM window: 0xf0400000-0xf04fffff [ 1.142513] pci 0000:00:1e.0: PREFETCH window: disabled [ 1.142553] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.142569] pci 0000:00:1c.0: setting latency timer to 64 [ 1.142592] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.142607] pci 0000:00:1c.1: setting latency timer to 64 [ 1.142629] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.142644] pci 0000:00:1c.2: setting latency timer to 64 [ 1.142666] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.142683] pci 0000:00:1c.3: setting latency timer to 64 [ 1.142701] pci 0000:00:1e.0: setting latency timer to 64 [ 1.142708] bus: 00 index 0 io port: [0x00-0xffff] [ 1.142715] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 1.142723] bus: 02 index 0 mmio: [0x0-0x0] [ 1.142729] bus: 02 index 1 mmio: [0x0-0x0] [ 1.142735] bus: 02 index 2 mmio: [0x0-0x0] [ 1.142741] bus: 02 index 3 mmio: [0x0-0x0] [ 1.142747] bus: 03 index 0 io port: [0x2000-0x2fff] [ 1.142754] bus: 03 index 1 mmio: [0xf0300000-0xf03fffff] [ 1.142761] bus: 03 index 2 mmio: [0x88000000-0x880fffff] [ 1.142768] bus: 03 index 3 mmio: [0x0-0x0] [ 1.142774] bus: 04 index 0 mmio: [0x0-0x0] [ 1.142781] bus: 04 index 1 mmio: [0xf0200000-0xf02fffff] [ 1.142787] bus: 04 index 2 mmio: [0x0-0x0] [ 1.142793] bus: 04 index 3 mmio: [0x0-0x0] [ 1.142799] bus: 05 index 0 mmio: [0x0-0xfff] [ 1.142806] bus: 05 index 1 mmio: [0x0-0xfffff] [ 1.142812] bus: 05 index 2 mmio: [0x0-0xfffff] [ 1.142818] bus: 05 index 3 mmio: [0x0-0x0] [ 1.142824] bus: 0a index 0 mmio: [0x0-0x0] [ 1.142831] bus: 0a index 1 mmio: [0xf0400000-0xf04fffff] [ 1.142837] bus: 0a index 2 mmio: [0x0-0x0] [ 1.142844] bus: 0a index 3 io port: [0x00-0xffff] [ 1.142850] bus: 0a index 4 mmio: [0x000000-0xffffffffffffffff] [ 1.142884] NET: Registered protocol family 2 [ 1.240226] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 1.241429] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 1.243614] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) [ 1.254059] TCP: Hash tables configured (established 262144 bind 65536) [ 1.254123] TCP reno registered [ 1.280279] NET: Registered protocol family 1 [ 1.280713] kvm: no hardware support [ 1.281007] Simple Boot Flag at 0x36 set to 0x1 [ 1.285028] audit: initializing netlink socket (disabled) [ 1.285100] type=2000 audit(1236547222.280:1): initialized [ 1.285588] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.295486] VFS: Disk quotas dquot_6.5.1 [ 1.295854] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.298842] squashfs: version 3.4 (2008/08/26) Phillip Lougher [ 1.300650] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.302773] NTFS driver 2.1.29 [Flags: R/W]. [ 1.304176] JFS: nTxBlock = 8192, nTxLock = 65536 [ 1.310674] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 1.313406] SGI XFS Quota Management subsystem [ 1.313440] msgmni has been set to 3970 [ 1.315617] alg: No test for stdrng (krng) [ 1.315670] io scheduler noop registered [ 1.315679] io scheduler anticipatory registered [ 1.315687] io scheduler deadline registered [ 1.315935] io scheduler cfq registered (default) [ 1.315967] pci 0000:00:02.0: Boot video device [ 1.316875] ACPI Error (psargs-0358): [CDW1] Namespace lookup failure, AE_NOT_FOUND [ 1.316893] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88007f013a80), AE_NOT_FOUND [ 1.319221] ACPI Error (psargs-0358): [CDW1] Namespace lookup failure, AE_NOT_FOUND [ 1.319239] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88007f013a80), AE_NOT_FOUND [ 1.321587] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.321686] pcieport-driver 0000:00:1c.0: found MSI capability [ 1.321767] pcieport-driver 0000:00:1c.0: irq 319 for MSI/MSI-X [ 1.321800] pci_express 0000:00:1c.0:pcie00: allocate port service [ 1.321946] pci_express 0000:00:1c.0:pcie02: allocate port service [ 1.322076] pci_express 0000:00:1c.0:pcie03: allocate port service [ 1.322355] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 1.322454] pcieport-driver 0000:00:1c.1: found MSI capability [ 1.322635] pcieport-driver 0000:00:1c.1: irq 318 for MSI/MSI-X [ 1.322667] pci_express 0000:00:1c.1:pcie00: allocate port service [ 1.322813] pci_express 0000:00:1c.1:pcie02: allocate port service [ 1.322948] pci_express 0000:00:1c.1:pcie03: allocate port service [ 1.323227] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 1.323326] pcieport-driver 0000:00:1c.2: found MSI capability [ 1.323402] pcieport-driver 0000:00:1c.2: irq 317 for MSI/MSI-X [ 1.323434] pci_express 0000:00:1c.2:pcie00: allocate port service [ 1.323577] pci_express 0000:00:1c.2:pcie02: allocate port service [ 1.323712] pci_express 0000:00:1c.2:pcie03: allocate port service [ 1.323993] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 1.324091] pcieport-driver 0000:00:1c.3: found MSI capability [ 1.324167] pcieport-driver 0000:00:1c.3: irq 316 for MSI/MSI-X [ 1.324199] pci_express 0000:00:1c.3:pcie00: allocate port service [ 1.324338] pci_express 0000:00:1c.3:pcie02: allocate port service [ 1.324474] pci_express 0000:00:1c.3:pcie03: allocate port service [ 1.410442] Linux agpgart interface v0.103 [ 1.410499] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 1.411447] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 1.414619] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.416623] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010980000, using 6144k, total 7616k [ 1.416635] vesafb: mode is 1024x768x32, linelength=4096, pages=1 [ 1.416643] vesafb: scrolling: redraw [ 1.416649] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.446399] Console: switching to colour frame buffer device 128x48 [ 1.473335] fb0: VESA VGA frame buffer device [ 1.473920] input: Power Button (FF) as /class/input/input0 [ 1.512547] ACPI: Power Button (FF) [PWRF] [ 1.513047] input: Lid Switch as /class/input/input1 [ 1.513491] ACPI: Lid Switch [LID] [ 1.513926] input: Power Button (CM) as /class/input/input2 [ 1.542533] ACPI: Power Button (CM) [PWRB] [ 1.545018] ACPI: SSDT 7F6D6484, 01F6 (r1 PmRef Cpu0Ist 3000 INTL 20061109) [ 1.547909] ACPI: SSDT 7F6D5E27, 05D8 (r1 PmRef Cpu0Cst 3001 INTL 20061109) [ 1.556687] Monitor-Mwait will be used to enter C-1 state [ 1.556693] Monitor-Mwait will be used to enter C-2 state [ 1.556698] Monitor-Mwait will be used to enter C-3 state [ 1.556971] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.557577] processor ACPI_CPU:00: registered as cooling_device0 [ 1.557917] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.559082] ACPI: SSDT 7F6D667A, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20061109) [ 1.561864] ACPI: SSDT 7F6D63FF, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20061109) [ 1.565711] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 1.566215] processor ACPI_CPU:01: registered as cooling_device1 [ 1.566554] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.574610] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.582434] ACPI: Thermal Zone [THRM] (56 C) [ 1.587771] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets [ 1.599951] intelfb: Version 0.9.6 [ 1.606423] intelfb 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.613268] intelfb: Cannot reserve FB region. [ 1.625452] brd: module loaded [ 1.634999] loop: module loaded [ 1.642558] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.650080] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.657960] r8169 0000:03:00.0: setting latency timer to 64 [ 1.658163] r8169 0000:03:00.0: irq 315 for MSI/MSI-X [ 1.659398] eth0: RTL8101e at 0xffffc20000066000, 00:1e:68:06:af:6e, XID 34200000 IRQ 315 [ 1.668914] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds [ 1.677511] iwlagn: Copyright(c) 2003-2008 Intel Corporation [ 1.686460] iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.695586] iwlagn 0000:04:00.0: setting latency timer to 64 [ 1.695620] iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 [ 1.751446] iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels [ 1.761420] iwlagn 0000:04:00.0: PCI INT A disabled [ 1.772837] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 1.774856] Linux video capture interface: v2.00 [ 1.785164] usbcore: registered new interface driver uvcvideo [ 1.795431] USB Video Class driver (v0.1.0) [ 1.805839] Uniform Multi-Platform E-IDE driver [ 1.816786] piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x03) [ 1.827782] pci 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.839101] piix 0000:00:1f.1: not 100% native mode: will probe irqs later [ 1.850373] ide0: BM-DMA at 0x1810-0x1817 [ 1.861529] ide1: BM-DMA at 0x1818-0x181f [ 1.872491] Probing IDE interface ide0... [ 2.660276] hda: MATSHITADVD-RAM UJ-852S, ATAPI CD/DVD-ROM drive [ 3.032723] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 3.033085] hda: UDMA/33 mode selected [ 3.044427] Probing IDE interface ide1... [ 3.650270] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 3.663738] ide1 at 0x170-0x177,0x376 on irq 15 [ 3.675996] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 3.687398] ide-gd driver 1.18 [ 3.698582] ide-cd driver 5.00 [ 3.710754] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache [ 3.722091] Uniform CD-ROM driver Revision: 3.20 [ 3.738251] Loading iSCSI transport class v2.0-870. [ 3.750856] iscsi: registered transport (tcp) [ 3.762535] Adaptec aacraid driver 1.1-5[2456]-ms [ 3.774887] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 3.786903] QLogic Fibre Channel HBA Driver: 8.02.01-k9 [ 3.798507] iscsi: registered transport (qla4xxx) [ 3.809877] QLogic iSCSI HBA Driver [ 3.820930] Emulex LightPulse Fibre Channel SCSI driver 8.2.8 [ 3.820933] Copyright(c) 2004-2008 Emulex. All rights reserved. [ 3.843626] DC390: clustering now enabled by default. If you get problems load [ 3.854332] with "disable_clustering=1" and report to maintainers [ 3.865517] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 3.876634] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 3.887765] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 [ 3.899095] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 3.910714] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 3.922132] 3ware 9000 Storage Controller device driver for Linux v2.26.02.011. [ 3.933629] ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007) [ 3.945109] RocketRAID 3xxx/4xxx Controller driver v1.3 (071203) [ 3.956415] stex: Promise SuperTrak EX Driver version: 3.6.0000.1 [ 3.967834] Driver 'sd' needs updating - please use bus_type methods [ 3.979105] Driver 'sr' needs updating - please use bus_type methods [ 3.990317] ahci 0000:00:1f.2: version 3.0 [ 3.990343] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 4.001411] ahci 0000:00:1f.2: irq 314 for MSI/MSI-X [ 4.001523] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 4.012612] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 4.012622] ahci 0000:00:1f.2: setting latency timer to 64 [ 4.023934] scsi0 : ahci [ 4.037285] scsi1 : ahci [ 4.048240] scsi2 : ahci [ 4.059299] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed [ 4.070150] ata2: SATA max UDMA/133 abar m2048@0xf0704000 port 0xf0704180 irq 314 [ 4.080945] ata3: SATA max UDMA/133 abar m2048@0xf0704000 port 0xf0704200 irq 314 [ 4.830036] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.841242] ACPI Warning (nspredef-0852): \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer [20080926] [ 4.863435] ata1.00: _GTF unexpected object type 0x1 [ 4.874730] ata1.00: ATA-8: FUJITSU MHY2200BH, 0040020B, max UDMA/100 [ 4.886041] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 4.898407] ata1.00: _GTF unexpected object type 0x1 [ 4.909837] ata1.00: configured for UDMA/100 [ 5.300033] ata2: SATA link down (SStatus 0 SControl 300) [ 5.680033] ata3: SATA link down (SStatus 0 SControl 300) [ 5.710581] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHY2200B 0040 PQ: 0 ANSI: 5 [ 5.722628] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB) [ 5.733933] sd 0:0:0:0: [sda] Write Protect is off [ 5.745085] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.745184] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.757179] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB) [ 5.768658] sd 0:0:0:0: [sda] Write Protect is off [ 5.779886] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.779986] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.791531] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > [ 5.950105] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.962430] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.974574] usbmon: debugfs is not available [ 5.985936] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.997380] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 6.008802] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 6.008809] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 6.020939] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 6.036123] ehci_hcd 0000:00:1a.7: debug port 1 [ 6.047188] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 6.047228] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf0704800 [ 6.072524] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 6.083765] usb usb1: configuration #1 chosen from 1 choice [ 6.094738] hub 1-0:1.0: USB hub found [ 6.105297] hub 1-0:1.0: 4 ports detected [ 6.117159] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 6.127725] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 6.127732] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 6.138502] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 6.153067] ehci_hcd 0000:00:1d.7: debug port 1 [ 6.163480] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 6.163519] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0704c00 [ 6.192521] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 6.203034] usb usb2: configuration #1 chosen from 1 choice [ 6.213713] hub 2-0:1.0: USB hub found [ 6.224199] hub 2-0:1.0: 6 ports detected [ 6.235296] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.245880] uhci_hcd: USB Universal Host Controller Interface driver [ 6.256562] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.267218] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 6.267224] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 6.277628] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 6.287703] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 [ 6.297973] usb usb3: configuration #1 chosen from 1 choice [ 6.308048] hub 3-0:1.0: USB hub found [ 6.317841] hub 3-0:1.0: 2 ports detected [ 6.328289] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 6.338179] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 6.338185] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 6.348128] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 6.358237] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 6.368429] usb usb4: configuration #1 chosen from 1 choice [ 6.378341] hub 4-0:1.0: USB hub found [ 6.387933] hub 4-0:1.0: 2 ports detected [ 6.398055] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 6.407603] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 6.407609] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 6.417172] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 6.426643] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 [ 6.436178] usb usb5: configuration #1 chosen from 1 choice [ 6.445629] hub 5-0:1.0: USB hub found [ 6.454742] hub 5-0:1.0: 2 ports detected [ 6.464437] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 6.473608] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 6.473614] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 6.482757] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 6.491888] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 [ 6.501313] usb usb6: configuration #1 chosen from 1 choice [ 6.510531] hub 6-0:1.0: USB hub found [ 6.519560] hub 6-0:1.0: 2 ports detected [ 6.529217] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 6.538418] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 6.538424] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 6.547721] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 6.557054] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 [ 6.560037] usb 2-3: new high speed USB device using ehci_hcd and address 2 [ 6.575996] usb usb7: configuration #1 chosen from 1 choice [ 6.585536] hub 7-0:1.0: USB hub found [ 6.594798] hub 7-0:1.0: 2 ports detected [ 6.604932] usbcore: registered new interface driver usblp [ 6.614308] Initializing USB Mass Storage driver... [ 6.623772] usbcore: registered new interface driver usb-storage [ 6.633172] USB Mass Storage support registered. [ 6.642954] usbcore: registered new interface driver libusual [ 6.652692] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 6.665421] i8042.c: Detected active multiplexing controller, rev 1.1. [ 6.676618] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 6.686319] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 6.695992] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 6.705495] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 6.714797] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 6.724568] mice: PS/2 mouse device common for all mice [ 6.738760] usb 2-3: configuration #1 chosen from 1 choice [ 6.748470] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008) [ 6.760390] input: Chicony USB 2.0 Camera as /class/input/input3 [ 6.853609] rtc_cmos 00:06: RTC can wake from S4 [ 6.863319] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 6.872801] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 6.884032] Bluetooth: Virtual HCI driver ver 1.2 [ 6.893890] Bluetooth: HCI UART driver ver 2.2 [ 6.903453] Bluetooth: HCI H4 protocol initialized [ 6.903935] input: AT Translated Set 2 keyboard as /class/input/input4 [ 6.922463] Bluetooth: HCI BCSP protocol initialized [ 6.932042] Bluetooth: HCILL protocol initialized [ 6.941511] Bluetooth: Broadcom Blutonium firmware driver ver 1.2 [ 6.951179] usbcore: registered new interface driver bcm203x [ 6.960812] Bluetooth: Digianswer Bluetooth USB driver ver 0.10 [ 6.970595] usbcore: registered new interface driver bpa10x [ 6.980249] Bluetooth: BlueFRITZ! USB driver ver 1.2 [ 6.990075] usbcore: registered new interface driver bfusb [ 6.999760] Bluetooth: Generic Bluetooth USB driver ver 0.3 [ 7.000038] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 7.019466] usbcore: registered new interface driver btusb [ 7.030840] cpuidle: using governor ladder [ 7.042650] cpuidle: using governor menu [ 7.053182] Marking TSC unstable due to TSC halts in idle [ 7.066944] usbcore: registered new interface driver hiddev [ 7.077020] usbcore: registered new interface driver usbhid [ 7.086582] usbhid: v2.6:USB HID core driver [ 7.096288] Advanced Linux Sound Architecture Driver Version 1.0.18rc3. [ 7.106523] ALSA device list: [ 7.116145] No soundcards found. [ 7.128344] TCP bic registered [ 7.137772] NET: Registered protocol family 17 [ 7.147264] Bluetooth: L2CAP ver 2.11 [ 7.156575] Bluetooth: L2CAP socket layer initialized [ 7.165863] Bluetooth: SCO (Voice Link) ver 0.6 [ 7.174968] Bluetooth: SCO socket layer initialized [ 7.183969] Bluetooth: RFCOMM socket layer initialized [ 7.192764] Bluetooth: RFCOMM TTY layer initialized [ 7.201474] Bluetooth: RFCOMM ver 1.10 [ 7.210274] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.219322] Bluetooth: BNEP filters: protocol multicast [ 7.228422] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 7.238478] RPC: Registered udp transport module. [ 7.247533] RPC: Registered tcp transport module. [ 7.279544] usb 4-1: configuration #1 chosen from 1 choice [ 7.288348] registered taskstats version 1 [ 7.297576] rtc_cmos 00:06: setting system clock to 2009-03-08 21:20:29 UTC (1236547229) [ 7.334807] input: USB Optical Mouse USB Optical Mouse as /class/input/input5 [ 7.412999] a4tech 0003:09DA:0006.0001: input: USB HID v1.10 Mouse [USB Optical Mouse USB Optical Mouse] on usb-0000:00:1a.1-1/input0 [ 7.500081] Clocksource tsc unstable (delta = -149399861 ns) [ 7.557947] kjournald starting. Commit interval 5 seconds [ 7.558141] EXT3-fs: mounted filesystem with ordered data mode. [ 7.558221] VFS: Mounted root (ext3 filesystem) readonly. [ 7.558249] Freeing unused kernel memory: 1980k freed [ 7.559390] Write protecting the kernel read-only data: 9524k [ 7.655331] Failed to execute /sbin/bootchartd. Attempting defaults... [ 11.419497] acpi device:04: registered as cooling_device2 [ 11.420472] input: Video Bus as /class/input/input6 [ 11.500343] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 11.510750] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 11.510858] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 11.518729] iTCO_vendor_support: vendor-support=0 [ 11.523662] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04 [ 11.523948] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 11.524435] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 11.599805] input: PC Speaker as /class/input/input7 [ 11.620907] ohci1394 0000:0a:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.665893] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 11.665901] ACPI: I/O resource 0000:00:1f.3 [0x1c20-0x1c3f] conflicts with ACPI region SMBI [0x1c20-0x1c2f] [ 11.665904] ACPI: Device needs an ACPI driver [ 11.682067] sdhci: Secure Digital Host Controller Interface driver [ 11.682072] sdhci: Copyright(c) Pierre Ossman [ 11.718464] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f0400000-f04007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 11.722966] sdhci-pci 0000:0a:01.1: SDHCI controller found [1180:0822] (rev 22) [ 11.722995] sdhci-pci 0000:0a:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 11.724164] sdhci-pci 0000:0a:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 11.725483] Registered led device: mmc0 [ 11.726722] mmc0: SDHCI controller on PCI [0000:0a:01.1] using DMA [ 11.820491] ACPI: Battery Slot [BAT1] (battery present) [ 11.829039] ACPI: AC Adapter [ACAD] (on-line) [ 12.494884] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81c0b1, caps: 0xa04711/0xa00000 [ 12.538997] input: SynPS/2 Synaptics TouchPad as /class/input/input8 [ 13.042977] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b240000aacb36] [ 13.704537] EXT3 FS on sda5, internal journal [ 14.019368] XFS mounting filesystem sda8 [ 14.695547] Ending clean XFS mount for filesystem: sda8 [ 14.737187] ReiserFS: sda6: found reiserfs format "3.6" with standard journal [ 14.737239] ReiserFS: sda6: using ordered data mode [ 14.746288] ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 14.747016] ReiserFS: sda6: checking transaction log (sda6) [ 14.805988] ReiserFS: sda6: Using r5 hash to sort names [ 14.843008] ReiserFS: sda7: found reiserfs format "3.6" with standard journal [ 14.843032] ReiserFS: sda7: using ordered data mode [ 14.850296] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 14.851097] ReiserFS: sda7: checking transaction log (sda7) [ 14.917123] ReiserFS: sda7: Using r5 hash to sort names [ 15.416951] Adding 1959920k swap on /dev/sda2. Priority:-1 extents:1 across:1959920k [ 19.737525] iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 19.737654] iwlagn 0000:04:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) [ 19.737838] iwlagn 0000:04:00.0: irq 313 for MSI/MSI-X [ 19.738042] iwlagn 0000:04:00.0: firmware: requesting iwlwifi-4965-2.ucode [ 20.147871] Registered led device: iwl-phy0:radio [ 20.147982] Registered led device: iwl-phy0:assoc [ 20.148073] Registered led device: iwl-phy0:RX [ 20.148161] Registered led device: iwl-phy0:TX [ 23.165683] [drm] Initialized drm 1.1.0 20060810 [ 23.178706] pci 0000:00:02.0: setting latency timer to 64 [ 23.179067] pci 0000:00:02.0: irq 312 for MSI/MSI-X [ 23.179591] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 23.181260] [drm:i915_setparam] *ERROR* unknown parameter 4 [ 23.918729] wlan0: authenticate with AP 00:1a:2a:8a:0c:13 [ 23.920683] wlan0: authenticated [ 23.920689] wlan0: associate with AP 00:1a:2a:8a:0c:13 [ 23.930065] wlan0: authenticate with AP 00:1a:2a:8a:0c:13 [ 23.931853] wlan0: authenticated [ 23.931857] wlan0: associate with AP 00:1a:2a:8a:0c:13 [ 23.936365] wlan0: RX AssocResp from 00:1a:2a:8a:0c:13 (capab=0x471 status=0 aid=2) [ 23.936370] wlan0: associated [ 24.327916] X:3696 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus [ 24.327922] reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining [ 25.461629] X:3696 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus [ 25.461634] reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining [ 25.679172] NET: Registered protocol family 10 [ 25.682166] lo: Disabled Privacy Extensions [ 25.814966] X:3696 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus [ 25.814971] reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining [ 25.833182] X:3960 freeing invalid memtype d0000000-e0000000 [ 36.180056] wlan0: no IPv6 routers present [ 56.579314] X:3696 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus [ 56.579323] reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining [ 56.614400] X:4299 freeing invalid memtype d0000000-e0000000 [ 99.090416] X:3696 freeing invalid memtype d0000000-e0000000 [ 99.664321] PM: Syncing filesystems ... done. [ 99.687568] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 99.688694] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 99.688923] Suspending console(s) (use no_console_suspend to debug) [ 100.331258] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 100.331542] sd 0:0:0:0: [sda] Stopping disk [ 101.289095] ACPI handle has no context! [ 101.290789] ACPI handle has no context! [ 101.290820] sdhci-pci 0000:0a:01.1: PCI INT B disabled [ 101.290832] ACPI handle has no context! [ 101.315324] ACPI handle has no context! [ 103.335526] iwlagn 0000:04:00.0: PCI INT A disabled [ 103.350418] r8169 0000:03:00.0: PME# enabled [ 103.350439] r8169 0000:03:00.0: wake-up capability enabled by ACPI [ 103.450249] PIIX_IDE 0000:00:1f.1: PCI INT A disabled [ 103.450596] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 103.470347] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 103.470428] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 103.470508] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 103.510191] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 103.530312] ehci_hcd 0000:00:1a.7: PCI INT C disabled [ 103.550262] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 103.550372] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 103.551343] ACPI: Preparing to enter system sleep state S3 [ 103.559056] Disabling non-boot CPUs ... [ 103.563038] CPU 1 is now offline [ 103.563041] lockdep: fixing up alternatives. [ 103.563050] SMP alternatives: switching to UP code [ 103.813040] CPU0 attaching NULL sched-domain. [ 103.813149] CPU1 attaching NULL sched-domain. [ 103.841580] CPU0 attaching NULL sched-domain. [ 103.842874] CPU1 is down [ 103.843093] Extended CMOS year: 2000 [ 103.843093] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 103.843093] Back to C! [ 103.843093] Extended CMOS year: 2000 [ 103.843093] Enabling non-boot CPUs ... [ 103.843093] lockdep: fixing up alternatives. [ 103.843093] SMP alternatives: switching to SMP code [ 104.121822] Booting processor 1 APIC 0x1 ip 0x6000 [ 103.812498] Initializing CPU#1 [ 103.812498] Calibrating delay using timer specific routine.. 3325.19 BogoMIPS (lpj=16625962) [ 103.812498] CPU: L1 I cache: 32K, L1 D cache: 32K [ 103.812498] CPU: L2 cache: 2048K [ 103.812498] CPU: Physical Processor ID: 0 [ 103.812498] CPU: Processor Core ID: 1 [ 103.812498] CPU1: Thermal monitoring enabled (TM2) [ 103.812498] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 104.281480] CPU1: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz stepping 0d [ 104.281791] CPU0 attaching NULL sched-domain. [ 104.285967] CPU1: Temperature/speed normal [ 104.290029] Switched to high resolution mode on CPU 1 [ 104.310073] CPU0 attaching sched-domain: [ 104.310077] domain 0: span 0-1 level MC [ 104.310079] groups: 0 1 [ 104.310091] CPU1 attaching sched-domain: [ 104.310094] domain 0: span 0-1 level MC [ 104.310096] groups: 1 0 [ 104.322546] CPU1 is up [ 104.322550] ACPI: Waking up from system sleep state S3 [ 104.771488] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 104.772370] pci 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x105) [ 104.772409] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 104.790175] pci 0000:00:02.0: setting latency timer to 64 [ 104.790262] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 104.790312] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 104.790326] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 104.790428] usb usb3: root hub lost power or was reset [ 104.790458] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 104.790467] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 104.790559] usb usb4: root hub lost power or was reset [ 104.810153] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 104.810166] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 104.830250] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 104.830269] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 104.830332] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 104.830351] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 104.830480] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) [ 104.830511] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0) [ 104.830531] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 104.830543] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 104.830630] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 104.830673] pcieport-driver 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x4020b) [ 104.830698] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x88018801) [ 104.830707] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf030f030) [ 104.830717] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020) [ 104.830736] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 104.830748] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 104.830834] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 104.830876] pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x4030a) [ 104.830902] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 104.830911] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xf020f020) [ 104.830921] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) [ 104.830940] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 104.830953] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 104.831039] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 104.831080] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040a) [ 104.831106] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 104.831115] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 104.831124] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) [ 104.831143] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 104.831156] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100404) [ 104.831242] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 104.831265] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 104.831274] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 104.831366] usb usb5: root hub lost power or was reset [ 104.831395] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 104.831404] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 104.831497] usb usb6: root hub lost power or was reset [ 104.831525] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 104.831534] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 104.831624] usb usb7: root hub lost power or was reset [ 104.850158] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 104.850172] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 104.850461] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 104.850470] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xf040f040) [ 104.850480] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [ 104.850505] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100007) [ 104.850540] pci 0000:00:1e.0: setting latency timer to 64 [ 104.850652] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 104.850661] PIIX_IDE 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) [ 104.850724] PIIX_IDE 0000:00:1f.1: setting latency timer to 64 [ 104.870189] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 104.870263] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 104.870373] ahci 0000:00:1f.2: setting latency timer to 64 [ 104.870617] i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x88100000) [ 104.890259] r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 104.890319] r8169 0000:03:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xf0300004) [ 104.890344] r8169 0000:03:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x2001) [ 104.890355] r8169 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 104.890370] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 104.890494] r8169 0000:03:00.0: wake-up capability disabled by ACPI [ 104.890505] r8169 0000:03:00.0: PME# disabled [ 104.910155] iwlagn 0000:04:00.0: enabling device (0000 -> 0002) [ 104.910168] iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 104.910245] iwlagn 0000:04:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 104.910322] iwlagn 0000:04:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0200004) [ 104.910343] iwlagn 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 104.910360] iwlagn 0000:04:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) [ 104.910515] iwlagn 0000:04:00.0: irq 313 for MSI/MSI-X [ 104.940163] ohci1394 0000:0a:01.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0400000) [ 104.940179] ohci1394 0000:0a:01.0: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 104.940198] ohci1394 0000:0a:01.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 104.993269] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f0400000-f04007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 105.010203] sdhci-pci 0000:0a:01.1: restoring config space at offset 0x4 (was 0x0, writing 0xf0400800) [ 105.010219] sdhci-pci 0000:0a:01.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 105.010238] sdhci-pci 0000:0a:01.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 105.010281] sdhci-pci 0000:0a:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 105.010285] sdhci-pci 0000:0a:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 105.011379] pci 0000:0a:01.2: restoring config space at offset 0x4 (was 0x0, writing 0xf0400c00) [ 105.011389] pci 0000:0a:01.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 105.011402] pci 0000:0a:01.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 105.011481] pci 0000:0a:01.3: restoring config space at offset 0x4 (was 0x0, writing 0xf0401000) [ 105.011490] pci 0000:0a:01.3: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 105.011503] pci 0000:0a:01.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 105.011583] pci 0000:0a:01.4: restoring config space at offset 0x4 (was 0x0, writing 0xf0401400) [ 105.011592] pci 0000:0a:01.4: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 105.011605] pci 0000:0a:01.4: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 105.016786] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 105.017126] hda: UDMA/33 mode selected [ 105.018182] sd 0:0:0:0: [sda] Starting disk [ 105.129729] Registered led device: iwl-phy0:radio [ 105.129817] Registered led device: iwl-phy0:assoc [ 105.129904] Registered led device: iwl-phy0:RX [ 105.129993] Registered led device: iwl-phy0:TX [ 105.220199] ata3: SATA link down (SStatus 0 SControl 300) [ 105.220257] ata2: SATA link down (SStatus 0 SControl 300) [ 106.420186] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 106.421240] ata1.00: _GTF unexpected object type 0x1 [ 106.422990] ata1.00: _GTF unexpected object type 0x1 [ 106.423264] ata1.00: configured for UDMA/100 [ 106.440302] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB) [ 106.440366] sd 0:0:0:0: [sda] Write Protect is off [ 106.440369] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 106.440459] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 107.140189] usb 2-3: reset high speed USB device using ehci_hcd and address 2 [ 107.570148] usb 4-1: reset low speed USB device using uhci_hcd and address 2 [ 107.886293] pm_op(): usb_dev_resume+0x0/0xb returns -32 [ 107.886301] PM: Device 4-1 failed to resume: error -32 [ 107.886690] pci 0000:00:02.0: setting latency timer to 64 [ 107.892928] Restarting tasks ... <6>usb 4-1: USB disconnect, address 2 [ 107.969682] done. [ 108.120131] usb 4-1: new low speed USB device using uhci_hcd and address 3 [ 108.143325] X:3696 conflicting memory types d0000000-e0000000 uncached-minus<->write-combining [ 108.143329] reserve_memtype failed 0xd0000000-0xe0000000, track uncached-minus, req write-combining [ 108.300531] usb 4-1: configuration #1 chosen from 1 choice [ 108.334685] input: USB Optical Mouse USB Optical Mouse as /class/input/input9 [ 108.400304] a4tech 0003:09DA:0006.0002: input: USB HID v1.10 Mouse [USB Optical Mouse USB Optical Mouse] on usb-0000:00:1a.1-1/input0 [ 108.690200] ACPI: EC: missing confirmations, switch off interrupt mode.