BIOS EBDA/lowmem at: 0009fc00/0009fc00 Linux version 2.6.28.7 (root@sdpc058) (gcc version 4.3.3 (Gentoo 4.3.3 p1.0, pie-10.1.5) ) #10 SMP Fri Feb 27 14:11:30 CET 2009 Command line: root=/dev/sda12 #vga=0x031b video=intelfb:1280x1024-32@75 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f5ffc00 (usable) BIOS-e820: 000000007f5ffc00 - 000000007f601c00 (ACPI NVS) BIOS-e820: 000000007f603c00 - 000000007f653c00 (reserved) BIOS-e820: 000000007f653c00 - 000000007f655c00 (ACPI data) BIOS-e820: 000000007f655c00 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) DMI 2.3 present. last_pfn = 0x7f5ff max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping: 0000000000000000-000000007f5ff000 0000000000 - 007f400000 page 2M 007f400000 - 007f5ff000 page 4k kernel direct mapping tables up to 7f5ff000 @ 8000-c000 last_map_addr: 7f5ff000 end: 7f5ff000 ACPI: RSDP 000FEBF0, 0024 (r2 DELL ) ACPI: XSDT 000FCE97, 006C (r1 DELL B8K 15 ASL 61) ACPI: FACP 000FCFBF, 00F4 (r3 DELL B8K 15 ASL 61) ACPI: DSDT FFF68960, 475F (r1 DELL dt_ex 1000 INTL 20050624) ACPI: FACS 7F5FFC00, 0040 ACPI: SSDT FFF6D0BF, 0098 (r1 DELL st_ex 1000 INTL 20050624) ACPI: APIC 000FD0B3, 0092 (r1 DELL B8K 15 ASL 61) ACPI: BOOT 000FD145, 0028 (r1 DELL B8K 15 ASL 61) ACPI: ASF! 000FD16D, 0092 (r32 DELL B8K 15 ASL 61) ACPI: MCFG 000FD1FF, 003E (r1 DELL B8K 15 ASL 61) ACPI: HPET 000FD23D, 0038 (r1 DELL B8K 15 ASL 61) ACPI: TCPA 000FD499, 0032 (r1 DELL B8K 15 ASL 61) ACPI: SLIC 000FD275, 0176 (r1 DELL B8K 15 ASL 61) ACPI: Local APIC address 0xfee00000 (5 early reservations) ==> bootmem [0000000000 - 007f5ff000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 00009dec88] TEXT DATA BSS ==> [0000200000 - 00009dec88] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] found SMP MP-table at [ffff8800000fe710] 000fe710 [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007f5ff On node 0 totalpages: 521630 DMA zone: 56 pages used for memmap DMA zone: 2117 pages reserved DMA zone: 1826 pages, LIFO batch:0 DMA32 zone: 7077 pages used for memmap DMA32 zone: 510554 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 8 CPUs, 6 hotplug CPUs Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) PERCPU: Allocating 49152 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 8, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 512380 Kernel command line: root=/dev/sda12 #vga=0x031b video=intelfb:1280x1024-32@75 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Fast TSC calibration using PIT Detected 2126.735 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... No AGP bridge found Memory: 2045404k/2086908k available (4177k kernel code, 388k absent, 40596k reserved, 2637k data, 356k init) hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 4253.47 BogoMIPS (lpj=2126735) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20080926 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4252.72 BogoMIPS (lpj=2126364) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 02 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (8506.19 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 888 bytes NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: ACPI Dock Station Driver: 1 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 32bit mmio: [0xfea00000-0xfeafffff] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] pci 0000:00:02.0: reg 20 io port: [0xecb8-0xecbf] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfebfffff] pci 0000:00:1a.0: reg 20 io port: [0xff20-0xff3f] pci 0000:00:1a.1: reg 20 io port: [0xff00-0xff1f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe9fbc00-0xfe9fbfff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xff980800-0xff980bff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07] pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13] pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27] pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33] pci 0000:00:1f.2: reg 20 io port: [0xfec0-0xfecf] pci 0000:00:1f.2: reg 24 io port: [0xecc0-0xeccf] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe9fbb00-0xfe9fbbff] pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff] pci 0000:00:1f.5: reg 10 io port: [0xfe40-0xfe47] pci 0000:00:1f.5: reg 14 io port: [0xfe50-0xfe53] pci 0000:00:1f.5: reg 18 io port: [0xfe60-0xfe67] pci 0000:00:1f.5: reg 1c io port: [0xfe70-0xfe73] pci 0000:00:1f.5: reg 20 io port: [0xfed0-0xfedf] pci 0000:00:1f.5: reg 24 io port: [0xecd0-0xecdf] pci 0000:00:1f.5: PME# supported from D3hot pci 0000:00:1f.5: PME# disabled pci 0000:00:1c.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff] pci 0000:02:00.0: reg 10 64bit mmio: [0xfe7f0000-0xfe7fffff] pci 0000:02:00.0: PME# supported from D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.4: bridge 32bit mmio: [0xfe700000-0xfe7fffff] pci 0000:00:1e.0: transparent bridge bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00, should be 88 [20080926] SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0xc00-0xc7f has been reserved system 00:0b: iomem range 0x0-0x9ffff could not be reserved system 00:0b: iomem range 0x100000-0xffffff could not be reserved system 00:0b: iomem range 0x1000000-0x7f5ffbff could not be reserved system 00:0b: iomem range 0xf0000-0xfffff could not be reserved system 00:0b: iomem range 0xc0000-0xcffff has been reserved system 00:0b: iomem range 0xfec00000-0xfecfffff has been reserved system 00:0b: iomem range 0xfee00000-0xfeefffff has been reserved system 00:0b: iomem range 0xffb00000-0xffbfffff has been reserved system 00:0b: iomem range 0xffc00000-0xffffffff has been reserved system 00:0c: ioport range 0x100-0x1fe has been reserved system 00:0c: ioport range 0x200-0x277 has been reserved system 00:0c: ioport range 0x280-0x2e7 has been reserved system 00:0c: ioport range 0x2f0-0x2f7 has been reserved system 00:0c: ioport range 0x300-0x377 has been reserved system 00:0c: ioport range 0x380-0x3bb has been reserved system 00:0c: ioport range 0x3c0-0x3e7 could not be reserved system 00:0c: ioport range 0x3f6-0x3f7 has been reserved system 00:0c: ioport range 0x400-0x4cf has been reserved system 00:0c: ioport range 0x4d2-0x57f has been reserved system 00:0c: ioport range 0x580-0x677 has been reserved system 00:0c: ioport range 0x680-0x777 has been reserved system 00:0c: ioport range 0x780-0x7bb has been reserved system 00:0c: ioport range 0x7c0-0x7ff has been reserved system 00:0c: ioport range 0x8e0-0x8ff has been reserved system 00:0c: ioport range 0x900-0x9fe has been reserved system 00:0c: ioport range 0xa00-0xafe has been reserved system 00:0c: ioport range 0xb00-0xbfe has been reserved system 00:0c: ioport range 0xc80-0xcaf has been reserved system 00:0c: ioport range 0xcc0-0xcf7 has been reserved system 00:0c: ioport range 0xd00-0xdfe has been reserved system 00:0c: ioport range 0xe00-0xefe has been reserved system 00:0c: ioport range 0xf00-0xffe has been reserved system 00:0c: ioport range 0x2000-0x20fe has been reserved system 00:0c: ioport range 0x2100-0x21fe has been reserved system 00:0c: ioport range 0x2200-0x22fe has been reserved system 00:0c: ioport range 0x2300-0x23fe has been reserved system 00:0c: ioport range 0x2400-0x24fe has been reserved system 00:0c: ioport range 0x2500-0x25fe has been reserved system 00:0c: ioport range 0x2600-0x26fe has been reserved system 00:0c: ioport range 0x2700-0x27fe has been reserved system 00:0c: ioport range 0x2800-0x28fe has been reserved system 00:0c: ioport range 0x2900-0x29fe has been reserved system 00:0c: ioport range 0x2a00-0x2afe has been reserved system 00:0c: ioport range 0x2b00-0x2bfe has been reserved system 00:0c: ioport range 0x2c00-0x2cfe has been reserved system 00:0c: ioport range 0x2d00-0x2dfe has been reserved system 00:0c: ioport range 0x2e00-0x2efe has been reserved system 00:0c: ioport range 0x2f00-0x2ffe has been reserved system 00:0c: ioport range 0x5000-0x50fe has been reserved system 00:0c: ioport range 0x5100-0x51fe has been reserved system 00:0c: ioport range 0x5200-0x52fe has been reserved system 00:0c: ioport range 0x5300-0x53fe has been reserved system 00:0c: ioport range 0x5400-0x54fe has been reserved system 00:0c: ioport range 0x5500-0x55fe has been reserved system 00:0c: ioport range 0x5600-0x56fe has been reserved system 00:0c: ioport range 0x5700-0x57fe has been reserved system 00:0c: ioport range 0x5800-0x58fe has been reserved system 00:0c: ioport range 0x5900-0x59fe has been reserved system 00:0c: ioport range 0x5a00-0x5afe has been reserved system 00:0c: ioport range 0x5b00-0x5bfe has been reserved system 00:0c: ioport range 0x5c00-0x5cfe has been reserved system 00:0c: ioport range 0x5d00-0x5dfe has been reserved system 00:0c: ioport range 0x5e00-0x5efe has been reserved system 00:0c: ioport range 0x5f00-0x5ffe has been reserved system 00:0c: ioport range 0x6000-0x60fe has been reserved system 00:0c: ioport range 0x6100-0x61fe has been reserved system 00:0c: ioport range 0x6200-0x62fe has been reserved system 00:0c: ioport range 0x6300-0x63fe has been reserved system 00:0c: ioport range 0x6400-0x64fe has been reserved system 00:0c: ioport range 0x6500-0x65fe has been reserved system 00:0c: ioport range 0x6600-0x66fe has been reserved system 00:0c: ioport range 0x6700-0x67fe has been reserved system 00:0c: ioport range 0x6800-0x68fe has been reserved system 00:0c: ioport range 0x6900-0x69fe has been reserved system 00:0c: ioport range 0x6a00-0x6afe has been reserved system 00:0c: ioport range 0x6b00-0x6bfe has been reserved system 00:0c: ioport range 0x6c00-0x6cfe has been reserved system 00:0c: ioport range 0x6d00-0x6dfe has been reserved system 00:0c: ioport range 0x6e00-0x6efe has been reserved system 00:0c: ioport range 0x6f00-0x6ffe has been reserved system 00:0c: ioport range 0xa000-0xa0fe has been reserved system 00:0c: ioport range 0xa100-0xa1fe has been reserved system 00:0c: ioport range 0xa200-0xa2fe has been reserved system 00:0c: ioport range 0xa300-0xa3fe has been reserved system 00:0c: ioport range 0xa400-0xa4fe has been reserved system 00:0c: ioport range 0xa500-0xa5fe has been reserved system 00:0c: ioport range 0xa600-0xa6fe has been reserved system 00:0c: ioport range 0xa700-0xa7fe has been reserved system 00:0c: ioport range 0xa800-0xa8fe has been reserved system 00:0c: ioport range 0xa900-0xa9fe has been reserved system 00:0c: ioport range 0xaa00-0xaafe has been reserved system 00:0c: ioport range 0xab00-0xabfe has been reserved system 00:0c: ioport range 0xac00-0xacfe has been reserved system 00:0c: ioport range 0xad00-0xadfe has been reserved system 00:0c: ioport range 0xae00-0xaefe has been reserved system 00:0c: ioport range 0xaf00-0xaffe has been reserved system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved system 00:0c: iomem range 0xfeda0000-0xfedacfff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM window: 0xfe700000-0xfe7fffff pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] bus: 01 index 0 mmio: [0x0-0x0] bus: 01 index 1 mmio: [0xfe800000-0xfe8fffff] bus: 01 index 2 mmio: [0x0-0x0] bus: 01 index 3 mmio: [0x0-0x0] bus: 02 index 0 mmio: [0x0-0x0] bus: 02 index 1 mmio: [0xfe700000-0xfe7fffff] bus: 02 index 2 mmio: [0x0-0x0] bus: 02 index 3 mmio: [0x0-0x0] bus: 03 index 0 mmio: [0x0-0x0] bus: 03 index 1 mmio: [0x0-0x0] bus: 03 index 2 mmio: [0x0-0x0] bus: 03 index 3 io port: [0x00-0xffff] bus: 03 index 4 mmio: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Simple Boot Flag at 0x7a set to 0x1 Microcode Update Driver: v2.00 , Peter Oruba HugeTLB registered 2 MB page size, pre-allocated 0 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.29 [Flags: R/O]. msgmni has been set to 3995 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pcieport-driver 0000:00:1c.0: irq 1279 for MSI/MSI-X pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.4: setting latency timer to 64 pcieport-driver 0000:00:1c.4: found MSI capability pcieport-driver 0000:00:1c.4: irq 1278 for MSI/MSI-X pci_express 0000:00:1c.4:pcie00: allocate port service pci_express 0000:00:1c.4:pcie02: allocate port service pci_express 0000:00:1c.4:pcie03: allocate port service processor ACPI_CPU:00: registered as cooling_device0 processor ACPI_CPU:01: registered as cooling_device1 Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965Q Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 Serial: 8250/16550 driver4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport_pc 00:08: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 brd: module loaded loop: module loaded Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI e100: Copyright(c) 1999-2006 Intel Corporation tg3.c:v3.94 (August 14, 2008) tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 tg3 0000:02:00.0: setting latency timer to 64 eth0: Tigon3 [partno(BCM95754) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:19:b9:4a:51:6f eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky console [netcon0] enabled netconsole: network logging started Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfec0 irq 20 ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfec8 irq 20 ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.01: SATA link down (SStatus 4 SControl 300) ata1.00: ATA-7: WDC WD2500JS-75NCB3, 10.02E04, max UDMA/133 ata1.00: 488281250 sectors, multi 8: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.01: SATA link down (SStatus 4 SControl 300) ata2.00: ATA-7: WDC WD2500JS-75NCB3, 10.02E04, max UDMA/133 ata2.00: 488281250 sectors, multi 8: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/133 isa bounce pool size: 16 pages scsi 0:0:0:0: Direct-Access ATA WDC WD2500JS-75N 10.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 488281250 512-byte hardware sectors: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 488281250 512-byte hardware sectors: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 > sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Direct-Access ATA WDC WD2500JS-75N 10.0 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 488281250 512-byte hardware sectors: (250 GB/232 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 488281250 512-byte hardware sectors: (250 GB/232 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sd 1:0:0:0: [sdb] Attached SCSI disk sd 1:0:0:0: Attached scsi generic sg1 type 0 ata_piix 0000:00:1f.5: PCI INT C -> GSI 20 (level, low) -> IRQ 20 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 20 ata4: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 20 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: HL-DT-STDVD-ROM GDRH20N, 0D04, max UDMA/100 ata3.00: configured for UDMA/100 ata4: SATA link down (SStatus 0 SControl 300) scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDRH20N 0D04 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 sr 2:0:0:0: Attached scsi generic sg2 type 5 Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.07 Fusion MPT SAS Host driver 3.04.07 ieee1394: raw1394: /dev/raw1394 device initialized ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe9fbc00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice i2c /dev entries driver i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20 coretemp coretemp.0: Using relative temperature scale! coretemp coretemp.1: Using relative temperature scale! device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.18rc3. HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 HDA Intel 0000:00:1b.0: setting latency timer to 64 input: AT Translated Set 2 keyboard as /class/input/input0 ALSA device list: #0: HDA Intel at 0xfe9fc000 irq 16 oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 356k freed usb 6-1: new low speed USB device using uhci_hcd and address 2 usb 6-1: configuration #1 chosen from 1 choice input: USB Optical Mouse as /class/input/input1 generic-usb 0003:0461:4D15.0001: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-1/input0 EXT3 FS on sda12, internal journal [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:02.0: irq 1277 for MSI/MSI-X [drm] Initialized i915 1.6.0 20080730 on minor 0 kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 506008k swap on /dev/sda11. Priority:-1 extents:1 across:506008k tg3 0000:02:00.0: irq 1276 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present Program intel_statuspag tried to access /dev/mem between 7c83c000->7c83d000.