X.Org X Server 1.6.0 Release Date: 2009-2-25 X Protocol Version 11, Revision 0 Build Operating System: Linux_2.6.22.18-server-1mdv Mandriva Current Operating System: Linux defected 2.6.29-desktop-0.rc8.3.1mnb #1 SMP Wed Mar 18 12:21:15 EDT 2009 x86_64 Build Date: 19 March 2009 12:32:05PM Before reporting problems, check http://qa.mandriva.com to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 24 08:56:06 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "layout1" (**) |-->Screen "screen1" (0) (**) | |-->Monitor "monitor1" (**) | |-->Device "device1" (**) |-->Input Device "Keyboard1" (**) |-->Input Device "Mouse1" (**) |-->Input Device "SynapticsMouse1" (**) Option "AllowMouseOpenFail" (==) Automatically adding devices (==) Automatically enabling devices (==) FontPath set to: catalogue:/etc/X11/fontpath.d, built-ins (==) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules" (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. (WW) Disabling Keyboard1 (WW) Disabling Mouse1 (II) Loader magic: 0xbc0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0@0:2:0) Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf6c00000/4194304, 0xe0000000/268435456, I/O @ 0x0000ef98/8 (--) PCI: (0@0:2:1) Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf6b00000/1048576 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded by default. (II) "dri" will be loaded. This was enabled by default and also specified in the config file. (II) "dri2" will be loaded by default. (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "v4l" (II) Loading /usr/lib64/xorg/modules/drivers//v4l_drv.so (II) Module v4l: vendor="X.Org Foundation" compiled for 1.5.99.3, module version = 0.1.1 ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension Multi-Buffering (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "freetype" (WW) Warning, couldn't open module freetype (II) UnloadModule: "freetype" (EE) Failed to load module "freetype" (module does not exist, 0) (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri2" (II) Loading /usr/lib64/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/lib64/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.6.0, module version = 2.6.99 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "synaptics" (II) Loading /usr/lib64/xorg/modules/input//synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.1.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) v4l driver for Video4Linux (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) Primary Device is: PCI 00@00:02:0 (WW) Falling back to old probe method for v4l (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib64/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.0, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (**) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (**) intel(0): Option "AccelMethod" "EXA" (II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset (--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset" (--) intel(0): Linear framebuffer at 0xE0000000 (--) intel(0): IO registers at addr 0xF6C00000 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (**) intel(0): Using EXA for acceleration (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA using monitor section monitor1 (**) intel(0): Option "PreferredMode" "1280x960" (II) intel(0): Output LVDS has no monitor section (II) intel(0): I2C bus "LVDSDDC_C" initialized. (II) intel(0): Attempting to determine panel fixed mode. (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): found backlight control method /sys/class/backlight/acpi_video0 (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): No SDVO device found on SDVOB (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed. (II) intel(0): Output HDMI-1 has no monitor section (II) intel(0): I2C bus "HDMIDDC_B" initialized. (II) intel(0): HDMI output 1 detected (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. (II) intel(0): No SDVO device found on SDVOC (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. (II) intel(0): Output HDMI-2 has no monitor section (II) intel(0): I2C bus "HDMIDDC_C" initialized. (II) intel(0): HDMI output 2 detected (II) intel(0): Output TV has no monitor section (II) intel(0): Resizable framebuffer: not available (1 3) (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "DEL", prod id 12295 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): EDID vendor "DEL", prod id 12295 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Output VGA connected (II) intel(0): Output LVDS connected (II) intel(0): Output HDMI-1 disconnected (II) intel(0): Output HDMI-2 disconnected (II) intel(0): Output TV disconnected (II) intel(0): Using fuzzy aspect match for initial modes (II) intel(0): Output VGA using initial mode 1024x768 (II) intel(0): Output LVDS using initial mode 1024x768 (II) intel(0): detected 512 kB GTT. (II) intel(0): detected 32764 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (**) intel(0): Display dimensions: (340, 270) mm (**) intel(0): DPI set to (203, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/lib64/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.6.0, module version = 2.4.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a (WW) intel(0): PP_STATUS before: on, ready, sequencing idle (WW) intel(0): PP_STATUS after: on, ready, sequencing on (WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x30000120 to 0x38000120 (WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000b00 to 0x08000b00 (WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x100000d0 to 0x000c00d0 (WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d (WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104 (WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d (WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200 (WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c (WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200 (WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1 (WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359 (WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022 (WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344 (WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415 (WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607 (WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001 (WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0 (WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0 (WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0 (WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0 (WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710087 (WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x6b405140 (WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024 (WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198 (WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x8000085e (WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283 (WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141 (WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000 (WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060 (WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000 (WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060 (WW) intel(0): Register 0x321b (FBC_FENCE_OFF) changed from 0x5401d800 to 0x4e03ee00 (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 1135360 total, 1 used (II) intel(0): I830CheckAvailableMemory: 4541436 kB available (WW) intel(0): DRI2 requires UXA drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: node name is /dev/dri/card0 drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: drmOpenMinor returns 11 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) [drm] loaded kernel module for "i915" driver. (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. (II) intel(0): [drm] framebuffer mapped by ddx driver (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): X context handle = 0x1 (II) intel(0): [drm] installed DRM signal handler (**) intel(0): Framebuffer compression enabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): [drm] Registers = 0xf6c00000 (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432 (II) intel(0): [dri] visual configs initialized (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) EXA(0): Offscreen pixmap area of 34603008 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): [DRI] installation complete (II) intel(0): Disable render standby. (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0b8ff000 (pgoffset 47359) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0d9ff000 (pgoffset 55807) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x001d3fff: compressed frame buffer (1872 kB, 0x00000000de000000 physical ) (II) intel(0): 0x001d4000-0x001d4fff: power context (4 kB) (II) intel(0): 0x01fff000: end of stolen memory (II) intel(0): 0x01fff000-0x0b8fefff: DRI memory manager (156672 kB) (II) intel(0): 0x0b8ff000-0x0d9fefff: exa offscreen (33792 kB) (II) intel(0): 0x0d9ff000-0x0f9fefff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x01fff000: start of memory manager (II) intel(0): 0x02020000-0x02b1ffff: depth buffer (11264 kB) Y tiled (II) intel(0): 0x03020000-0x03b1ffff: back buffer (11264 kB) X tiled (II) intel(0): 0x04020000-0x05d57fff: front buffer (29920 kB) X tiled (II) intel(0): 0x06020000-0x06029fff: HW cursors (40 kB) (II) intel(0): 0x0b8ff000: end of memory manager (II) intel(0): [drm] mapped front buffer at 0xe4020000, handle = 0xe4020000 (II) intel(0): [drm] mapped back buffer at 0xe3020000, handle = 0xe3020000 (II) intel(0): [drm] mapped depth buffer at 0xe2020000, handle = 0xe2020000 (II) intel(0): [drm] mapped classic textures at 0xed9ff000, handle = 0xed9ff000 (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output HDMI-1 is connected to pipe none (II) intel(0): Output HDMI-2 is connected to pipe none (II) intel(0): Output TV is connected to pipe none (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (**) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): direct rendering: XF86DRI Enabled (WW) intel(0): Option "PreferredMode" is not used (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Screen 0 is not DRI2 capable drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 12, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 12, (OK) drmOpenByBusid: drmOpenMinor returns 12 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: enabled GLX_texture_from_pixmap with driver support (II) AIGLX: Loaded and initialized /usr/lib64/dri/i965_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) intel(0): Setting screen physical size to 303 x 190 (II) Synaptics touchpad driver version 1.1.0 (--) SynapticsMouse1 auto-dev sets device to /dev/input/event3 (**) Option "Device" "/dev/input/event3" (II) SynapticsMouse1: x-axis range 0 - 1023 (II) SynapticsMouse1: y-axis range 0 - 767 (II) SynapticsMouse1: pressure range 0 - 127 (II) SynapticsMouse1: finger width range 0 - 0 (II) SynapticsMouse1: buttons: left right middle (**) Option "SHMConfig" "on" (**) Option "LeftEdge" "120" (**) Option "RightEdge" "830" (**) Option "TopEdge" "120" (**) Option "BottomEdge" "650" (**) Option "FingerLow" "14" (**) Option "FingerHigh" "15" (**) Option "MaxTapMove" "110" (**) Option "VertScrollDelta" "20" (**) Option "HorizScrollDelta" "20" (**) Option "EdgeMotionMinSpeed" "200" (**) Option "EdgeMotionMaxSpeed" "200" (**) Option "UpDownScrolling" "0" (**) Option "CircularScrolling" "1" (**) Option "CircScrollTrigger" "2" (**) Option "MinSpeed" "0.8" (**) Option "MaxSpeed" "1.00" (**) Option "AccelFactor" "0.015" (--) SynapticsMouse1 touchpad found (**) Option "SendCoreEvents" (**) SynapticsMouse1: always reports core events (II) XINPUT: Adding extended input device "SynapticsMouse1" (type: TOUCHPAD) (**) SynapticsMouse1: (accel) keeping acceleration scheme 1 (**) SynapticsMouse1: (accel) filter chain progression: 2.00 (**) SynapticsMouse1: (accel) filter stage 0: 20.00 ms (**) SynapticsMouse1: (accel) set acceleration profile 0 (--) SynapticsMouse1 touchpad found (II) config/hal: Adding input device AT Translated Set 2 keyboard (II) LoadModule: "evdev" (II) Loading /usr/lib64/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.0, module version = 2.2.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "be" (**) Option "xkb_options" "compose:rwin" (II) config/hal: Adding input device HID 413c:8157 (**) HID 413c:8157: always reports core events (**) HID 413c:8157: Device: "/dev/input/event16" (II) HID 413c:8157: Found keys (II) HID 413c:8157: Configuring as keyboard (II) XINPUT: Adding extended input device "HID 413c:8157" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "be" (**) Option "xkb_options" "compose:rwin" (II) config/hal: Adding input device Video Bus (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event8" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "be" (**) Option "xkb_options" "compose:rwin" (II) config/hal: Adding input device Power Button (CM) (**) Power Button (CM): always reports core events (**) Power Button (CM): Device: "/dev/input/event5" (II) Power Button (CM): Found keys (II) Power Button (CM): Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button (CM)" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "be" (**) Option "xkb_options" "compose:rwin" (II) config/hal: Adding input device Sleep Button (CM) (**) Sleep Button (CM): always reports core events (**) Sleep Button (CM): Device: "/dev/input/event6" (II) Sleep Button (CM): Found keys (II) Sleep Button (CM): Configuring as keyboard (II) XINPUT: Adding extended input device "Sleep Button (CM)" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "be" (**) Option "xkb_options" "compose:rwin" (II) config/hal: Adding input device Video Bus (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event9" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "be" (**) Option "xkb_options" "compose:rwin" (II) config/hal: Adding input device Macintosh mouse button emulation (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event0" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1 (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00 (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms (**) Macintosh mouse button emulation: (accel) set acceleration profile 0 (II) config/hal: Adding input device DualPoint Stick (**) DualPoint Stick: always reports core events (**) DualPoint Stick: Device: "/dev/input/event2" (II) DualPoint Stick: Found 3 mouse buttons (II) DualPoint Stick: Found x and y relative axes (II) DualPoint Stick: Configuring as mouse (**) DualPoint Stick: YAxisMapping: buttons 4 and 5 (**) DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE) (**) DualPoint Stick: (accel) keeping acceleration scheme 1 (**) DualPoint Stick: (accel) filter chain progression: 2.00 (**) DualPoint Stick: (accel) filter stage 0: 20.00 ms (**) DualPoint Stick: (accel) set acceleration profile 0 (II) config/hal: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (II) Synaptics touchpad driver version 1.1.0 (**) Option "Device" "/dev/input/event3" (II) AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 1023 (II) AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 767 (II) AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127 (II) AlpsPS/2 ALPS DualPoint TouchPad: finger width range 0 - 0 (II) AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle (--) AlpsPS/2 ALPS DualPoint TouchPad touchpad found (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD) (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1 (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) filter chain progression: 2.00 (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) filter stage 0: 20.00 ms (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) set acceleration profile 0 (WW) AlpsPS/2 ALPS DualPoint TouchPad can't grab event device, errno=16 (--) AlpsPS/2 ALPS DualPoint TouchPad touchpad found (II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse (**) Logitech USB-PS/2 Optical Mouse: always reports core events (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event15" (II) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s) (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5 (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE) (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1 (**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00 (**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms (**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0 (II) config/hal: Adding input device HID 413c:8158 (**) HID 413c:8158: always reports core events (**) HID 413c:8158: Device: "/dev/input/event17" (II) HID 413c:8158: Found 3 mouse buttons (II) HID 413c:8158: Found x and y relative axes (II) HID 413c:8158: Configuring as mouse (**) HID 413c:8158: YAxisMapping: buttons 4 and 5 (**) HID 413c:8158: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "HID 413c:8158" (type: MOUSE) (**) HID 413c:8158: (accel) keeping acceleration scheme 1 (**) HID 413c:8158: (accel) filter chain progression: 2.00 (**) HID 413c:8158: (accel) filter stage 0: 20.00 ms (**) HID 413c:8158: (accel) set acceleration profile 0 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "DEL", prod id 12295 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "DEL", prod id 12295 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "DEL", prod id 12295 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "DEL", prod id 12295 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "DEL", prod id 12295 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 exaCopyDirty: Pending damage region empty! (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "DEL", prod id 12295 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "DEL", prod id 12295 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (EE) Logitech USB-PS/2 Optical Mouse: Read error: Resource temporarily unavailable (II) AIGLX: Suspending AIGLX clients for VT switch (II) intel(0): xf86UnbindGARTMemory: unbind key 0 (II) intel(0): xf86UnbindGARTMemory: unbind key 1 (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0b8ff000 (pgoffset 47359) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0d9ff000 (pgoffset 55807) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x001d3fff: compressed frame buffer (1872 kB, 0x00000000de000000 physical ) (II) intel(0): 0x001d4000-0x001d4fff: power context (4 kB) (II) intel(0): 0x01fff000: end of stolen memory (II) intel(0): 0x01fff000-0x0b8fefff: DRI memory manager (156672 kB) (II) intel(0): 0x0b8ff000-0x0d9fefff: exa offscreen (33792 kB) (II) intel(0): 0x0d9ff000-0x0f9fefff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x01fff000: start of memory manager (II) intel(0): 0x02020000-0x02b1ffff: depth buffer (11264 kB) Y tiled (II) intel(0): 0x03020000-0x03b1ffff: back buffer (11264 kB) X tiled (II) intel(0): 0x04020000-0x05d57fff: front buffer (29920 kB) X tiled (II) intel(0): 0x06020000-0x06029fff: HW cursors (40 kB) (II) intel(0): 0x0b8ff000: end of memory manager (WW) intel(0): ESR is 0x00000011, page table error (WW) intel(0): PGTBL_ER is 0x00100000, CS instruction GTT PTE (WW) intel(0): Existing errors found in hardware state. (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output HDMI-1 is connected to pipe none (II) intel(0): Output HDMI-2 is connected to pipe none (II) intel(0): Output TV is connected to pipe none (--) SynapticsMouse1 touchpad found (WW) AlpsPS/2 ALPS DualPoint TouchPad can't grab event device, errno=16 (--) AlpsPS/2 ALPS DualPoint TouchPad touchpad found (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) HID 413c:8157: Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Power Button (CM): Device reopened after 1 attempts. (II) Sleep Button (CM): Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Macintosh mouse button emulation: Device reopened after 1 attempts. (II) DualPoint Stick: Device reopened after 1 attempts. (II) Logitech USB-PS/2 Optical Mouse: Device reopened after 1 attempts. (II) HID 413c:8158: Device reopened after 1 attempts. (II) AIGLX: Suspending AIGLX clients for VT switch (II) intel(0): xf86UnbindGARTMemory: unbind key 0 (II) intel(0): xf86UnbindGARTMemory: unbind key 1 (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0b8ff000 (pgoffset 47359) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0d9ff000 (pgoffset 55807) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x001d3fff: compressed frame buffer (1872 kB, 0x00000000de000000 physical ) (II) intel(0): 0x001d4000-0x001d4fff: power context (4 kB) (II) intel(0): 0x01fff000: end of stolen memory (II) intel(0): 0x01fff000-0x0b8fefff: DRI memory manager (156672 kB) (II) intel(0): 0x0b8ff000-0x0d9fefff: exa offscreen (33792 kB) (II) intel(0): 0x0d9ff000-0x0f9fefff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x01fff000: start of memory manager (II) intel(0): 0x02020000-0x02b1ffff: depth buffer (11264 kB) Y tiled (II) intel(0): 0x03020000-0x03b1ffff: back buffer (11264 kB) X tiled (II) intel(0): 0x04020000-0x05d57fff: front buffer (29920 kB) X tiled (II) intel(0): 0x06020000-0x06029fff: HW cursors (40 kB) (II) intel(0): 0x0b8ff000: end of memory manager (WW) intel(0): ESR is 0x00000010, page table error (WW) intel(0): PGTBL_ER is 0x00100000, CS instruction GTT PTE (WW) intel(0): Existing errors found in hardware state. (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output HDMI-1 is connected to pipe none (II) intel(0): Output HDMI-2 is connected to pipe none (II) intel(0): Output TV is connected to pipe none (--) SynapticsMouse1 touchpad found (WW) AlpsPS/2 ALPS DualPoint TouchPad can't grab event device, errno=16 (--) AlpsPS/2 ALPS DualPoint TouchPad touchpad found (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) HID 413c:8157: Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Power Button (CM): Device reopened after 1 attempts. (II) Sleep Button (CM): Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Macintosh mouse button emulation: Device reopened after 1 attempts. (II) DualPoint Stick: Device reopened after 1 attempts. (II) Logitech USB-PS/2 Optical Mouse: Device reopened after 1 attempts. (II) HID 413c:8158: Device reopened after 1 attempts. (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "DEL", prod id 12295 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (EE) Logitech USB-PS/2 Optical Mouse: Read error: Resource temporarily unavailable (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "DEL", prod id 12295 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (EE) Logitech USB-PS/2 Optical Mouse: Read error: Resource temporarily unavailable (EE) Logitech USB-PS/2 Optical Mouse: Read error: Resource temporarily unavailable (EE) Logitech USB-PS/2 Optical Mouse: Read error: Resource temporarily unavailable (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) AIGLX: Suspending AIGLX clients for VT switch (II) intel(0): xf86UnbindGARTMemory: unbind key 0 (II) intel(0): xf86UnbindGARTMemory: unbind key 1 (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0b8ff000 (pgoffset 47359) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0d9ff000 (pgoffset 55807) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x001d3fff: compressed frame buffer (1872 kB, 0x00000000de000000 physical ) (II) intel(0): 0x001d4000-0x001d4fff: power context (4 kB) (II) intel(0): 0x01fff000: end of stolen memory (II) intel(0): 0x01fff000-0x0b8fefff: DRI memory manager (156672 kB) (II) intel(0): 0x0b8ff000-0x0d9fefff: exa offscreen (33792 kB) (II) intel(0): 0x0d9ff000-0x0f9fefff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x01fff000: start of memory manager (II) intel(0): 0x02020000-0x02b1ffff: depth buffer (11264 kB) Y tiled (II) intel(0): 0x03020000-0x03b1ffff: back buffer (11264 kB) X tiled (II) intel(0): 0x04020000-0x05d57fff: front buffer (29920 kB) X tiled (II) intel(0): 0x06020000-0x06029fff: HW cursors (40 kB) (II) intel(0): 0x0b8ff000: end of memory manager (WW) intel(0): ESR is 0x00000011, page table error (WW) intel(0): PGTBL_ER is 0x00100000, CS instruction GTT PTE (WW) intel(0): Existing errors found in hardware state. (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output HDMI-1 is connected to pipe none (II) intel(0): Output HDMI-2 is connected to pipe none (II) intel(0): Output TV is connected to pipe none (--) SynapticsMouse1 touchpad found (WW) AlpsPS/2 ALPS DualPoint TouchPad can't grab event device, errno=16 (--) AlpsPS/2 ALPS DualPoint TouchPad touchpad found (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) HID 413c:8157: Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Power Button (CM): Device reopened after 1 attempts. (II) Sleep Button (CM): Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Macintosh mouse button emulation: Device reopened after 1 attempts. (II) DualPoint Stick: Device reopened after 1 attempts. (II) Logitech USB-PS/2 Optical Mouse: Device reopened after 1 attempts. (II) HID 413c:8158: Device reopened after 1 attempts. (EE) Logitech USB-PS/2 Optical Mouse: Read error: Resource temporarily unavailable (EE) Logitech USB-PS/2 Optical Mouse: Read error: Resource temporarily unavailable (II) AIGLX: Suspending AIGLX clients for VT switch (II) intel(0): xf86UnbindGARTMemory: unbind key 0 (II) intel(0): xf86UnbindGARTMemory: unbind key 1 (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0b8ff000 (pgoffset 47359) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0d9ff000 (pgoffset 55807) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x001d3fff: compressed frame buffer (1872 kB, 0x00000000de000000 physical ) (II) intel(0): 0x001d4000-0x001d4fff: power context (4 kB) (II) intel(0): 0x01fff000: end of stolen memory (II) intel(0): 0x01fff000-0x0b8fefff: DRI memory manager (156672 kB) (II) intel(0): 0x0b8ff000-0x0d9fefff: exa offscreen (33792 kB) (II) intel(0): 0x0d9ff000-0x0f9fefff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x01fff000: start of memory manager (II) intel(0): 0x02020000-0x02b1ffff: depth buffer (11264 kB) Y tiled (II) intel(0): 0x03020000-0x03b1ffff: back buffer (11264 kB) X tiled (II) intel(0): 0x04020000-0x05d57fff: front buffer (29920 kB) X tiled (II) intel(0): 0x06020000-0x06029fff: HW cursors (40 kB) (II) intel(0): 0x0b8ff000: end of memory manager (WW) intel(0): ESR is 0x00000010, page table error (WW) intel(0): PGTBL_ER is 0x00100000, CS instruction GTT PTE (WW) intel(0): Existing errors found in hardware state. (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output HDMI-1 is connected to pipe none (II) intel(0): Output HDMI-2 is connected to pipe none (II) intel(0): Output TV is connected to pipe none (--) SynapticsMouse1 touchpad found (WW) AlpsPS/2 ALPS DualPoint TouchPad can't grab event device, errno=16 (--) AlpsPS/2 ALPS DualPoint TouchPad touchpad found (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) HID 413c:8157: Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Power Button (CM): Device reopened after 1 attempts. (II) Sleep Button (CM): Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Macintosh mouse button emulation: Device reopened after 1 attempts. (II) DualPoint Stick: Device reopened after 1 attempts. (II) Logitech USB-PS/2 Optical Mouse: Device reopened after 1 attempts. (II) HID 413c:8158: Device reopened after 1 attempts. (II) AIGLX: Suspending AIGLX clients for VT switch (II) intel(0): xf86UnbindGARTMemory: unbind key 0 (II) intel(0): xf86UnbindGARTMemory: unbind key 1 (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0b8ff000 (pgoffset 47359) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0d9ff000 (pgoffset 55807) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x001d3fff: compressed frame buffer (1872 kB, 0x00000000de000000 physical ) (II) intel(0): 0x001d4000-0x001d4fff: power context (4 kB) (II) intel(0): 0x01fff000: end of stolen memory (II) intel(0): 0x01fff000-0x0b8fefff: DRI memory manager (156672 kB) (II) intel(0): 0x0b8ff000-0x0d9fefff: exa offscreen (33792 kB) (II) intel(0): 0x0d9ff000-0x0f9fefff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x01fff000: start of memory manager (II) intel(0): 0x02020000-0x02b1ffff: depth buffer (11264 kB) Y tiled (II) intel(0): 0x03020000-0x03b1ffff: back buffer (11264 kB) X tiled (II) intel(0): 0x04020000-0x05d57fff: front buffer (29920 kB) X tiled (II) intel(0): 0x06020000-0x06029fff: HW cursors (40 kB) (II) intel(0): 0x0b8ff000: end of memory manager (WW) intel(0): ESR is 0x00000011, page table error (WW) intel(0): PGTBL_ER is 0x00100000, CS instruction GTT PTE (WW) intel(0): Existing errors found in hardware state. (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output HDMI-1 is connected to pipe none (II) intel(0): Output HDMI-2 is connected to pipe none (II) intel(0): Output TV is connected to pipe none (--) SynapticsMouse1 touchpad found (WW) AlpsPS/2 ALPS DualPoint TouchPad can't grab event device, errno=16 (--) AlpsPS/2 ALPS DualPoint TouchPad touchpad found (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) HID 413c:8157: Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Power Button (CM): Device reopened after 1 attempts. (II) Sleep Button (CM): Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Macintosh mouse button emulation: Device reopened after 1 attempts. (II) DualPoint Stick: Device reopened after 1 attempts. (II) Logitech USB-PS/2 Optical Mouse: Device reopened after 1 attempts. (II) HID 413c:8158: Device reopened after 1 attempts. (II) AIGLX: Suspending AIGLX clients for VT switch (II) intel(0): xf86UnbindGARTMemory: unbind key 0 (II) intel(0): xf86UnbindGARTMemory: unbind key 1 (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0b8ff000 (pgoffset 47359) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0d9ff000 (pgoffset 55807) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x001d3fff: compressed frame buffer (1872 kB, 0x00000000de000000 physical ) (II) intel(0): 0x001d4000-0x001d4fff: power context (4 kB) (II) intel(0): 0x01fff000: end of stolen memory (II) intel(0): 0x01fff000-0x0b8fefff: DRI memory manager (156672 kB) (II) intel(0): 0x0b8ff000-0x0d9fefff: exa offscreen (33792 kB) (II) intel(0): 0x0d9ff000-0x0f9fefff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x01fff000: start of memory manager (II) intel(0): 0x02020000-0x02b1ffff: depth buffer (11264 kB) Y tiled (II) intel(0): 0x03020000-0x03b1ffff: back buffer (11264 kB) X tiled (II) intel(0): 0x04020000-0x05d57fff: front buffer (29920 kB) X tiled (II) intel(0): 0x06020000-0x06029fff: HW cursors (40 kB) (II) intel(0): 0x0b8ff000: end of memory manager (WW) intel(0): ESR is 0x00000011, page table error (WW) intel(0): PGTBL_ER is 0x00100000, CS instruction GTT PTE (WW) intel(0): Existing errors found in hardware state. (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output HDMI-1 is connected to pipe none (II) intel(0): Output HDMI-2 is connected to pipe none (II) intel(0): Output TV is connected to pipe none (--) SynapticsMouse1 touchpad found (WW) AlpsPS/2 ALPS DualPoint TouchPad can't grab event device, errno=16 (--) AlpsPS/2 ALPS DualPoint TouchPad touchpad found (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) HID 413c:8157: Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Power Button (CM): Device reopened after 1 attempts. (II) Sleep Button (CM): Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Macintosh mouse button emulation: Device reopened after 1 attempts. (II) DualPoint Stick: Device reopened after 1 attempts. (II) Logitech USB-PS/2 Optical Mouse: Device reopened after 1 attempts. (II) HID 413c:8158: Device reopened after 1 attempts. (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "DEL", prod id 12295 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "DEL", prod id 12295 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (EE) XKB: Could not invoke xkbcomp (EE) XKB: Couldn't compile keymap (EE) XKB: Could not invoke xkbcomp (EE) XKB: Couldn't compile keymap (EE) XKB: Could not invoke xkbcomp (EE) XKB: Couldn't compile keymap (EE) XKB: Could not invoke xkbcomp (EE) XKB: Couldn't compile keymap (EE) XKB: Could not invoke xkbcomp (EE) XKB: Couldn't compile keymap (EE) XKB: Could not invoke xkbcomp (EE) XKB: Couldn't compile keymap (EE) XKB: Could not invoke xkbcomp (EE) XKB: Couldn't compile keymap (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) PM Event received: Capability Changed I830PMEvent: Capability change (EE) Logitech USB-PS/2 Optical Mouse: Read error: Resource temporarily unavailable (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) AIGLX: Suspending AIGLX clients for VT switch (II) intel(0): xf86UnbindGARTMemory: unbind key 0 (II) intel(0): xf86UnbindGARTMemory: unbind key 1 (II) config/hal: removing device Logitech USB-PS/2 Optical Mouse (II) Logitech USB-PS/2 Optical Mouse: Close (II) UnloadModule: "evdev" (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0b8ff000 (pgoffset 47359) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0d9ff000 (pgoffset 55807) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x001d3fff: compressed frame buffer (1872 kB, 0x00000000de000000 physical ) (II) intel(0): 0x001d4000-0x001d4fff: power context (4 kB) (II) intel(0): 0x01fff000: end of stolen memory (II) intel(0): 0x01fff000-0x0b8fefff: DRI memory manager (156672 kB) (II) intel(0): 0x0b8ff000-0x0d9fefff: exa offscreen (33792 kB) (II) intel(0): 0x0d9ff000-0x0f9fefff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x01fff000: start of memory manager (II) intel(0): 0x02020000-0x02b1ffff: depth buffer (11264 kB) Y tiled (II) intel(0): 0x03020000-0x03b1ffff: back buffer (11264 kB) X tiled (II) intel(0): 0x04020000-0x05d57fff: front buffer (29920 kB) X tiled (II) intel(0): 0x06020000-0x06029fff: HW cursors (40 kB) (II) intel(0): 0x0b8ff000: end of memory manager (WW) intel(0): ESR is 0x00000010, page table error (WW) intel(0): PGTBL_ER is 0x00100000, CS instruction GTT PTE (WW) intel(0): Existing errors found in hardware state. (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output HDMI-1 is connected to pipe none (II) intel(0): Output HDMI-2 is connected to pipe none (II) intel(0): Output TV is connected to pipe none (--) SynapticsMouse1 touchpad found (WW) AlpsPS/2 ALPS DualPoint TouchPad can't grab event device, errno=16 (--) AlpsPS/2 ALPS DualPoint TouchPad touchpad found (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) HID 413c:8157: Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Power Button (CM): Device reopened after 1 attempts. (II) Sleep Button (CM): Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Macintosh mouse button emulation: Device reopened after 1 attempts. (II) DualPoint Stick: Device reopened after 1 attempts. (II) HID 413c:8158: Device reopened after 1 attempts. (II) AIGLX: Suspending AIGLX clients for VT switch (II) intel(0): xf86UnbindGARTMemory: unbind key 0 (II) intel(0): xf86UnbindGARTMemory: unbind key 1 (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0b8ff000 (pgoffset 47359) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0d9ff000 (pgoffset 55807) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x001d3fff: compressed frame buffer (1872 kB, 0x00000000de000000 physical ) (II) intel(0): 0x001d4000-0x001d4fff: power context (4 kB) (II) intel(0): 0x01fff000: end of stolen memory (II) intel(0): 0x01fff000-0x0b8fefff: DRI memory manager (156672 kB) (II) intel(0): 0x0b8ff000-0x0d9fefff: exa offscreen (33792 kB) (II) intel(0): 0x0d9ff000-0x0f9fefff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x01fff000: start of memory manager (II) intel(0): 0x02020000-0x02b1ffff: depth buffer (11264 kB) Y tiled (II) intel(0): 0x03020000-0x03b1ffff: back buffer (11264 kB) X tiled (II) intel(0): 0x04020000-0x05d57fff: front buffer (29920 kB) X tiled (II) intel(0): 0x06020000-0x06029fff: HW cursors (40 kB) (II) intel(0): 0x0b8ff000: end of memory manager (WW) intel(0): ESR is 0x00000010, page table error (WW) intel(0): PGTBL_ER is 0x00100000, CS instruction GTT PTE (WW) intel(0): Existing errors found in hardware state. (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output HDMI-1 is connected to pipe none (II) intel(0): Output HDMI-2 is connected to pipe none (II) intel(0): Output TV is connected to pipe none (--) SynapticsMouse1 touchpad found (WW) AlpsPS/2 ALPS DualPoint TouchPad can't grab event device, errno=16 (--) AlpsPS/2 ALPS DualPoint TouchPad touchpad found (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) HID 413c:8157: Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Power Button (CM): Device reopened after 1 attempts. (II) Sleep Button (CM): Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Macintosh mouse button emulation: Device reopened after 1 attempts. (II) DualPoint Stick: Device reopened after 1 attempts. (II) HID 413c:8158: Device reopened after 1 attempts. (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) AIGLX: Suspending AIGLX clients for VT switch (II) intel(0): xf86UnbindGARTMemory: unbind key 0 (II) intel(0): xf86UnbindGARTMemory: unbind key 1 (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0b8ff000 (pgoffset 47359) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0d9ff000 (pgoffset 55807) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x001d3fff: compressed frame buffer (1872 kB, 0x00000000de000000 physical ) (II) intel(0): 0x001d4000-0x001d4fff: power context (4 kB) (II) intel(0): 0x01fff000: end of stolen memory (II) intel(0): 0x01fff000-0x0b8fefff: DRI memory manager (156672 kB) (II) intel(0): 0x0b8ff000-0x0d9fefff: exa offscreen (33792 kB) (II) intel(0): 0x0d9ff000-0x0f9fefff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x01fff000: start of memory manager (II) intel(0): 0x02020000-0x02b1ffff: depth buffer (11264 kB) Y tiled (II) intel(0): 0x03020000-0x03b1ffff: back buffer (11264 kB) X tiled (II) intel(0): 0x04020000-0x05d57fff: front buffer (29920 kB) X tiled (II) intel(0): 0x06020000-0x06029fff: HW cursors (40 kB) (II) intel(0): 0x0b8ff000: end of memory manager (WW) intel(0): ESR is 0x00000010, page table error (WW) intel(0): PGTBL_ER is 0x00100000, CS instruction GTT PTE (WW) intel(0): Existing errors found in hardware state. (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output HDMI-1 is connected to pipe none (II) intel(0): Output HDMI-2 is connected to pipe none (II) intel(0): Output TV is connected to pipe none (--) SynapticsMouse1 touchpad found (WW) AlpsPS/2 ALPS DualPoint TouchPad can't grab event device, errno=16 (--) AlpsPS/2 ALPS DualPoint TouchPad touchpad found (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) HID 413c:8157: Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Power Button (CM): Device reopened after 1 attempts. (II) Sleep Button (CM): Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Macintosh mouse button emulation: Device reopened after 1 attempts. (II) DualPoint Stick: Device reopened after 1 attempts. (II) HID 413c:8158: Device reopened after 1 attempts. (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) AIGLX: Suspending AIGLX clients for VT switch (II) intel(0): xf86UnbindGARTMemory: unbind key 0 (II) intel(0): xf86UnbindGARTMemory: unbind key 1 (II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse (**) Logitech USB-PS/2 Optical Mouse: always reports core events (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event15" (II) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s) (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5 (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE) (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1 (**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00 (**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms (**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0 (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0b8ff000 (pgoffset 47359) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0d9ff000 (pgoffset 55807) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x001d3fff: compressed frame buffer (1872 kB, 0x00000000de000000 physical ) (II) intel(0): 0x001d4000-0x001d4fff: power context (4 kB) (II) intel(0): 0x01fff000: end of stolen memory (II) intel(0): 0x01fff000-0x0b8fefff: DRI memory manager (156672 kB) (II) intel(0): 0x0b8ff000-0x0d9fefff: exa offscreen (33792 kB) (II) intel(0): 0x0d9ff000-0x0f9fefff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x01fff000: start of memory manager (II) intel(0): 0x02020000-0x02b1ffff: depth buffer (11264 kB) Y tiled (II) intel(0): 0x03020000-0x03b1ffff: back buffer (11264 kB) X tiled (II) intel(0): 0x04020000-0x05d57fff: front buffer (29920 kB) X tiled (II) intel(0): 0x06020000-0x06029fff: HW cursors (40 kB) (II) intel(0): 0x0b8ff000: end of memory manager (WW) intel(0): ESR is 0x00000010, page table error (WW) intel(0): PGTBL_ER is 0x00100000, CS instruction GTT PTE (WW) intel(0): Existing errors found in hardware state. (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output HDMI-1 is connected to pipe none (II) intel(0): Output HDMI-2 is connected to pipe none (II) intel(0): Output TV is connected to pipe none (--) SynapticsMouse1 touchpad found (WW) AlpsPS/2 ALPS DualPoint TouchPad can't grab event device, errno=16 (--) AlpsPS/2 ALPS DualPoint TouchPad touchpad found (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) HID 413c:8157: Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Power Button (CM): Device reopened after 1 attempts. (II) Sleep Button (CM): Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Macintosh mouse button emulation: Device reopened after 1 attempts. (II) DualPoint Stick: Device reopened after 1 attempts. (II) HID 413c:8158: Device reopened after 1 attempts. (II) AIGLX: Suspending AIGLX clients for VT switch (II) intel(0): xf86UnbindGARTMemory: unbind key 0 (II) intel(0): xf86UnbindGARTMemory: unbind key 1 (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0b8ff000 (pgoffset 47359) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0d9ff000 (pgoffset 55807) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x001d3fff: compressed frame buffer (1872 kB, 0x00000000de000000 physical ) (II) intel(0): 0x001d4000-0x001d4fff: power context (4 kB) (II) intel(0): 0x01fff000: end of stolen memory (II) intel(0): 0x01fff000-0x0b8fefff: DRI memory manager (156672 kB) (II) intel(0): 0x0b8ff000-0x0d9fefff: exa offscreen (33792 kB) (II) intel(0): 0x0d9ff000-0x0f9fefff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x01fff000: start of memory manager (II) intel(0): 0x02020000-0x02b1ffff: depth buffer (11264 kB) Y tiled (II) intel(0): 0x03020000-0x03b1ffff: back buffer (11264 kB) X tiled (II) intel(0): 0x04020000-0x05d57fff: front buffer (29920 kB) X tiled (II) intel(0): 0x06020000-0x06029fff: HW cursors (40 kB) (II) intel(0): 0x0b8ff000: end of memory manager (WW) intel(0): ESR is 0x00000011, page table error (WW) intel(0): PGTBL_ER is 0x00100000, CS instruction GTT PTE (WW) intel(0): Existing errors found in hardware state. (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output HDMI-1 is connected to pipe none (II) intel(0): Output HDMI-2 is connected to pipe none (II) intel(0): Output TV is connected to pipe none (--) SynapticsMouse1 touchpad found (WW) AlpsPS/2 ALPS DualPoint TouchPad can't grab event device, errno=16 (--) AlpsPS/2 ALPS DualPoint TouchPad touchpad found (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) HID 413c:8157: Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Power Button (CM): Device reopened after 1 attempts. (II) Sleep Button (CM): Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Macintosh mouse button emulation: Device reopened after 1 attempts. (II) DualPoint Stick: Device reopened after 1 attempts. (II) HID 413c:8158: Device reopened after 1 attempts. (II) Logitech USB-PS/2 Optical Mouse: Device reopened after 1 attempts. (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "DEL", prod id 12295 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "DEL", prod id 12295 (II) intel(0): EDID vendor "SEC", prod id 21570 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz) (II) intel(0): EDID vendor "SEC", prod id 21570