Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.29.1-54.tp.fc11.i586 (tp@localhost.localdomain) (gcc version 4.4.0 20090409 (Red Hat 4.4.0-0.32) (GCC) ) #1 SMP Mon Apr 13 00:42:41 CEST 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
PAT WC disabled due to known CPU erratum.
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable)
 BIOS-e820: 000000007f6e0000 - 000000007f6e3000 (ACPI NVS)
 BIOS-e820: 000000007f6e3000 - 000000007f6f0000 (ACPI data)
 BIOS-e820: 000000007f6f0000 - 000000007f700000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.2 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
last_pfn = 0x7f6e0 max_arch_pfn = 0x100000
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2040MB, range: 8MB, type UC
reg 2, base: 2039MB, range: 1MB, type UC
total RAM coverred: 2039M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 16M 	num_reg: 3  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2039MB, range: 1MB, type UC
reg 2, base: 2040MB, range: 8MB, type UC
kernel direct mapping tables up to 373fe000 @ 10000-16000
Using x86 segment limits to approximate NX protection
RAMDISK: 37cd2000 - 37fef2fe
Allocated new RAMDISK: 00a10000 - 00d2d2fe
Move RAMDISK from 0000000037cd2000 - 0000000037fef2fd to 00a10000 - 00d2d2fd
ACPI: RSDP 000F7600, 0014 (r0 IntelR)
ACPI: RSDT 7F6E3040, 0038 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
ACPI: FACP 7F6E30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 7F6E3180, 4B85 (r1 INTELR AWRDACPI     1000 MSFT  100000E)
ACPI: FACS 7F6E0000, 0040
ACPI: MCFG 7F6E7E40, 003C (r1 IntelR AWRDACPI 42302E31 AWRD        0)
ACPI: APIC 7F6E7D80, 0068 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
ACPI: SSDT 7F6E7EC0, 019E (r1  PmRef  Cpu0Ist     3000 INTL 20041203)
ACPI: SSDT 7F6E8350, 01E3 (r1  PmRef    CpuPm     3000 INTL 20041203)
ACPI: Local APIC address 0xfee00000
1154MB HIGHMEM available.
883MB LOWMEM available.
  mapped low ram: 0 - 373fe000
  low ram: 00000000 - 373fe000
  bootmap 00011000 - 00017e80
(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000400000 - 0000a0bddc]    TEXT DATA BSS ==> [0000400000 - 0000a0bddc]
  #4 [0000a0c000 - 0000a10000]    INIT_PG_TABLE ==> [0000a0c000 - 0000a10000]
  #5 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
  #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
  #7 [0000a10000 - 0000d2d2fe]      NEW RAMDISK ==> [0000a10000 - 0000d2d2fe]
  #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
found SMP MP-table at [c00f3650] 000f3650
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000373fe
  HighMem  0x000373fe -> 0x0007f6e0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0007f6e0
On node 0 totalpages: 521839
free_area_init_node: node 0, pgdat c08a7b80, node_mem_map c1000200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1736 pages used for memmap
  Normal zone: 220470 pages, LIFO batch:31
  HighMem zone: 2310 pages used for memmap
  HighMem zone: 293340 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 7f700000:60900000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Allocating 40960 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517761
Kernel command line: ro root=/dev/mapper/vg_fedora11-LogVolRoot rhgb quiet libata.force=5.00:80c acpi_enforce_resources=lax drm.debug=1
Unknown boot option `drm.debug=1': ignoring
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1666.775 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 10438720 bytes of page_cgroup
please try cgroup_disable=memory option if you don't want
Memory: 2049660k/2087808k available (3120k kernel code, 36916k reserved, 1890k data, 424k init, 1182600k highmem)
virtual kernel memory layout:
    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
      .init : 0xc08ec000 - 0xc0956000   ( 424 kB)
      .data : 0xc070c0ea - 0xc08e4a18   (1890 kB)
      .text : 0xc0400000 - 0xc070c0ea   (3120 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 3333.55 BogoMIPS (lpj=1666775)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20081204
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 18054 entries in 71 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Genuine Intel(R) CPU           T2300  @ 1.66GHz stepping 08
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3332.89 BogoMIPS (lpj=1666445)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Genuine Intel(R) CPU           T2300  @ 1.66GHz stepping 08
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (6666.44 BogoMIPS).
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=184 bytes
sizeof(task_struct)=3228 bytes
CPU0 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 0 1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 1 0
net_namespace: 1064 bytes
Booting paravirtualized kernel on bare hardware
regulator: core version 0.5
Time: 23:48:07  Date: 04/12/09
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xfde80000-0xfdefffff]
pci 0000:00:02.0: reg 14 io port: [0xff00-0xff07]
pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0xfdf80000-0xfdfbffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0xfdf00000-0xfdf7ffff]
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xfe00-0xfe1f]
pci 0000:00:1d.1: reg 20 io port: [0xfd00-0xfd1f]
pci 0000:00:1d.2: reg 20 io port: [0xfc00-0xfc1f]
pci 0000:00:1d.3: reg 20 io port: [0xfb00-0xfb1f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0290 (mask 000f)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0xfa00-0xfa0f]
pci 0000:00:1f.2: reg 10 io port: [0xf900-0xf907]
pci 0000:00:1f.2: reg 14 io port: [0xf800-0xf803]
pci 0000:00:1f.2: reg 18 io port: [0xf700-0xf707]
pci 0000:00:1f.2: reg 1c io port: [0xf600-0xf603]
pci 0000:00:1f.2: reg 20 io port: [0xf500-0xf50f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffe000-0xfdffe3ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfd800000-0xfd8fffff]
pci 0000:02:00.0: reg 10 32bit mmio: [0xfdde0000-0xfddfffff]
pci 0000:02:00.0: reg 18 io port: [0xef00-0xef1f]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xfda00000-0xfdafffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 *7 9 10 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x290-0x30f has been reserved
system 00:01: ioport range 0x880-0x88f has been reserved
system 00:07: ioport range 0x400-0x4bf could not be reserved
system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0a: iomem range 0xcea00-0xcffff has been reserved
system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
system 00:0a: iomem range 0x7f6e0000-0x7f6fffff could not be reserved
system 00:0a: iomem range 0x0-0x9ffff could not be reserved
system 00:0a: iomem range 0x100000-0x7f6dffff could not be reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0a: iomem range 0xfed13000-0xfed1dfff has been reserved
system 00:0a: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0a: iomem range 0xffb00000-0xffb7ffff has been reserved
system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved
system 00:0a: iomem range 0xe0000-0xeffff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0:   IO window: 0xc000-0xcfff
pci 0000:00:1c.0:   MEM window: 0xfdb00000-0xfdbfffff
pci 0000:00:1c.0:   PREFETCH window: 0x000000fd800000-0x000000fd8fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.1:   IO window: 0xe000-0xefff
pci 0000:00:1c.1:   MEM window: 0xfdd00000-0xfddfffff
pci 0000:00:1c.1:   PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0:   IO window: 0xd000-0xdfff
pci 0000:00:1e.0:   MEM window: 0xfda00000-0xfdafffff
pci 0000:00:1e.0:   PREFETCH window: 0x000000fd900000-0x000000fd9fffff
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
pci_bus 0000:01: resource 1 mem: [0xfdb00000-0xfdbfffff]
pci_bus 0000:01: resource 2 mem: [0xfd800000-0xfd8fffff]
pci_bus 0000:01: resource 3 mem: [0x0-0x0]
pci_bus 0000:02: resource 0 io:  [0xe000-0xefff]
pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff]
pci_bus 0000:02: resource 2 mem: [0xfdc00000-0xfdcfffff]
pci_bus 0000:02: resource 3 mem: [0x0-0x0]
pci_bus 0000:03: resource 0 io:  [0xd000-0xdfff]
pci_bus 0000:03: resource 1 mem: [0xfda00000-0xfdafffff]
pci_bus 0000:03: resource 2 mem: [0xfd900000-0xfd9fffff]
pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 3188k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
type=2000 audit(1239580086.522:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1701
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button (CM) [PWRB]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (on)
processor ACPI_CPU:00: registered as cooling_device1
ACPI: SSDT 7F6E82C0, 0087 (r1  PmRef  Cpu1Ist     3000 INTL 20041203)
processor ACPI_CPU:01: registered as cooling_device2
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (24 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GM Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe100 irq 26
ata2: DUMMY
ata3: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe200 irq 26
ata4: DUMMY
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
ata5: FORCE: cable set to 80c
ata5.00: ATA-5: ST320011A, 3.75, max UDMA/100
ata5.00: 39102336 sectors, multi 1: LBA 
ata5.00: configured for UDMA/100
scsi 4:0:0:0: Direct-Access     ATA      ST320011A        3.75 PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 39102336 512-byte hardware sectors: (20.0 GB/18.6 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sda] 39102336 512-byte hardware sectors: (20.0 GB/18.6 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 4:0:0:0: [sda] Attached SCSI disk
sd 4:0:0:0: Attached scsi generic sg0 type 0
ata6: port disabled. ignoring.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29.1-54.tp.fc11.i586 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.29.1-54.tp.fc11.i586 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.29.1-54.tp.fc11.i586 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.29.1-54.tp.fc11.i586 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.29.1-54.tp.fc11.i586 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
  Magic number: 5:118:858
Initalizing network drop monitor service
Freeing unused kernel memory: 424k freed
Write protecting the kernel read-only data: 1440k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[drm] Initialized drm 1.1.0 20060810
[drm:drm_init] 
[drm:drm_get_dev] 
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
[drm:drm_get_minor] 
[drm:drm_get_minor] new minor assigned 64
[drm:drm_get_minor] 
[drm:drm_get_minor] new minor assigned 0
[drm:i915_init_phys_hws] Enabled hardware status page
[drm:drm_agp_bind_pages] 
[drm:parse_panel_data] Found panel mode in BIOS VBT tables:
[drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0x0
[drm:drm_irq_install] irq=16
[drm:intel_modeset_init] 2 display pipes available.
[drm:drm_sysfs_connector_add] adding "VGA-1" to sysfs
[drm:drm_sysfs_hotplug_event] generating hotplug event
[drm:intel_no_lvds_dmi_callback] Skipping LVDS initialization for Abit iL-90MV
usb 1-2: new high speed USB device using ehci_hcd and address 2
usb 1-2: New USB device found, idVendor=05e3, idProduct=0605
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB2.0 Hub
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
[drm:drm_sysfs_connector_add] adding "DVI-D-1" to sysfs
[drm:drm_sysfs_hotplug_event] generating hotplug event
[drm:intel_sdvo_init] SDVOB device VID/DID: 04:AC.00, clock range 25MHz - 165MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
[drm:intel_sdvo_read_byte] i2c transfer returned -6
[drm:intel_sdvo_init] No SDVO device found on SDVOC
[drm:drm_sysfs_connector_add] adding "SVIDEO-1" to sysfs
[drm:drm_sysfs_hotplug_event] generating hotplug event
[drm:drm_helper_probe_single_connector_modes] VGA-1
[drm:drm_helper_probe_single_connector_modes] VGA-1 is disconnected
[drm:drm_helper_probe_single_connector_modes] DVI-D-1
[drm:intel_sdvo_detect] SDVO response 1 0
[drm:drm_mode_debug_printmodeline] Modeline 23:"0x0" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:drm_mode_prune_invalid] Not using 0x0 mode 16
[drm:drm_helper_probe_single_connector_modes] Probed modes for DVI-D-1
[drm:drm_mode_debug_printmodeline] Modeline 22:"1024x768" 60003 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline] Modeline 19:"800x600" 60315 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline] Modeline 20:"640x480" 60000 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline] Modeline 21:"720x400" 70080 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_helper_probe_single_connector_modes] SVIDEO-1
[drm:drm_vblank_get] enabling vblank on crtc 0, ret: -22
[drm:intel_crtc_mode_set] Mode for pipe A:
[drm:drm_mode_debug_printmodeline] Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[drm:intel_pipe_set_base] No FB bound
[drm] TV-10: set mode NTSC 480i 0
usb 3-2: new full speed USB device using uhci_hcd and address 2
[drm:i915_driver_irq_handler] hotplug event received, stat 0x00000400
[drm:drm_sysfs_hotplug_event] generating hotplug event
[drm:intel_tv_detect_type] No TV connection detected
[drm:drm_helper_probe_single_connector_modes] SVIDEO-1 is disconnected
[drm:drm_setup_crtcs] 
[drm:drm_enable_connectors] connector 5 enabled? no
[drm:drm_enable_connectors] connector 7 enabled? yes
[drm:drm_enable_connectors] connector 9 enabled? no
[drm:drm_target_preferred] looking for preferred mode on connector 7
[drm:drm_target_preferred] found mode 1024x768
[drm:drm_setup_crtcs] picking CRTCs for 2048x2048 config
[drm:drm_setup_crtcs] desired mode 1024x768 set on crtc 3
[drm:intelfb_probe] 
[drm:intelfb_single_fb_probe] 
[drm:intelfb_single_fb_probe] creating new fb (console size 1024x768, buffer size 1024x768)
[drm:drm_agp_bind_pages] 
allocated 1024x768 fb: 0x007df000, bo f62d5840
fbcon: inteldrmfb (fb0) is primary device
[drm:intelfb_set_par] 1024 -1
Console: switching to colour frame buffer device 128x48
[drm:drm_crtc_helper_set_config] 
[drm:drm_crtc_helper_set_config] crtc: f6732000 3 fb: f62dcc00 connectors: f6732448 num_connectors: 1 (x, y) (0, 0)
[drm:drm_crtc_helper_set_config] crtc has no fb, full mode set
[drm:drm_crtc_helper_set_config] modes are different, full mode set
[drm:drm_mode_debug_printmodeline] Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[drm:drm_mode_debug_printmodeline] Modeline 22:"1024x768" 60003 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_crtc_helper_set_config] setting connector 7 crtc to f6732000
[drm:drm_crtc_helper_set_config] attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline] Modeline 22:"1024x768" 60003 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_vblank_get] enabling vblank on crtc 0, ret: -22
[drm:intel_crtc_mode_set] Mode for pipe A:
[drm:drm_mode_debug_printmodeline] Modeline 22:"1024x768" 60003 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
usb 3-2: New USB device found, idVendor=0451, idProduct=2036
usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-2: Product: General Purpose USB Hub
usb 3-2: configuration #1 chosen from 1 choice
[drm:intel_pipe_set_base] Writing base 007DF000 00000000 0 0
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 2 ports detected
[drm] TMDS-8: set mode 1024x768 16
usb 1-2.4: new high speed USB device using ehci_hcd and address 4
usb 1-2.4: New USB device found, idVendor=14cd, idProduct=6600
usb 1-2.4: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-2.4: Product: USB 2.0  IDE DEVICE    
usb 1-2.4: Manufacturer: Super Top 
usb 1-2.4: SerialNumber: ??????????
usb 1-2.4: configuration #1 chosen from 1 choice
fb0: inteldrmfb frame buffer device
registered panic notifier
[drm:intel_opregion_init] graphic opregion physical addr: 0x0
[drm:intel_opregion_init] ACPI OpRegion not supported!
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
usb 3-2.1: new low speed USB device using uhci_hcd and address 3
usb 3-2.1: New USB device found, idVendor=046d, idProduct=c704
usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2.1: Product: USB Receiver
usb 3-2.1: Manufacturer: Logitech
usb 3-2.1: SerialNumber: 1450F5
usb 3-2.1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.1/3-2.1:1.0/input/input4
logitech 0003:046D:C704.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2.1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.1/3-2.1:1.1/input/input5
logitech 0003:046D:C704.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2.1/input1
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access     HITACHI_ DK23BA-20             PQ: 0 ANSI: 0
sd 6:0:0:0: [sdb] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1 sdb2
sd 6:0:0:0: [sdb] Attached SCSI disk
sd 6:0:0:0: Attached scsi generic sg1 type 0
EXT4-fs: barriers enabled
kjournald2 starting: pid 789, dev dm-1:8, commit interval 5 seconds
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem dm-1 with ordered data mode
type=1404 audit(1239580098.579:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 119640 rules.
SELinux: 8192 avtab hash slots, 119640 rules.
SELinux:  8 users, 13 roles, 2676 types, 123 bools, 1 sens, 1024 cats
SELinux:  74 classes, 119640 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-1, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1239580099.087:3): policy loaded auid=4294967295 ses=4294967295
udev: starting version 139
input: PC Speaker as /devices/platform/pcspkr/input/input6
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:02:00.0: setting latency timer to 64
e1000e 0000:02:00.0: irq 27 for MSI/MSI-X
e1000e 0000:02:00.0: Warning: detected ASPM enabled in EEPROM
0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:50:8d:93:cd:4f
0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
intel_rng: FWH not detected
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH7-M DH TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:3503: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
ALSA sound/pci/hda/hda_codec.c:3507:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3511:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3512:    mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3520:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x1c, aux=0x0
device-mapper: multipath: version 1.0.5 loaded
EXT4 FS on dm-1, internal journal on dm-1:8
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sdb1, type ext3), uses xattr
EXT4-fs: barriers enabled
kjournald2 starting: pid 1759, dev dm-0:8, commit interval 5 seconds
EXT4 FS on dm-0, internal journal on dm-0:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem dm-0 with ordered data mode
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
swap_cgroup: uses 1984 bytes of vmalloc for pointer array space and 2031616 bytes to hold mem_cgroup pointers on swap
swap_cgroup can be disabled by noswapaccount boot option.
Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol00.  Priority:-1 extents:1 across:2031608k 
swap_cgroup: uses 1000 bytes of vmalloc for pointer array space and 1024000 bytes to hold mem_cgroup pointers on swap
swap_cgroup can be disabled by noswapaccount boot option.
Adding 1023992k swap on /dev/mapper/vg_fedora11-LogVolSwap.  Priority:-2 extents:1 across:1023992k 
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts