xorg.conf------------------------------ # Xorg configuration created by livna-config-display Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from data in "/etc/sysconfig/keyboard" Identifier "Keyboard0" Driver "kbd" Option "XkbLayout" "it" Option "XkbModel" "pc105" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" Option "DPMS" Option "PreferredMode" "1680x1050" EndSection Section "Device" Identifier "Device0" Driver "nouveau" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection dmesg------------------------------ Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27.21-170.2.56.fc10.x86_64 (mockbuild@x86-3.fedora.phx.redhat.com) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Mon Mar 23 23:08:10 EDT 2009 Command line: ro root=UUID=10478b20-cf81-46ef-ba24-e8f18190eb4d pci=nommconf KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) DMI 2.3 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. last_pfn = 0x3fff0 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping 0000000000 - 003fe00000 page 2M 003fe00000 - 003fff0000 page 4k kernel direct mapping tables up to 3fff0000 @ 10000-13000 last_map_addr: 3fff0000 end: 3fff0000 RAMDISK: 37ca2000 - 37fef69b ACPI: RSDP 000F8370, 0014 (r0 Nvidia) ACPI: RSDT 3FFF3040, 0038 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: FACP 3FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: DSDT 3FFF3180, 631A (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) ACPI: FACS 3FFF0000, 0040 ACPI: SSDT 3FFF95C0, 0206 (r1 PTLTD POWERNOW 1 LTP 1) ACPI: HPET 3FFF9840, 0038 (r1 Nvidia AWRDACPI 42302E31 AWRD 98) ACPI: MCFG 3FFF98C0, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: APIC 3FFF9500, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: DMI detected: Acer Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-000000003fff0000 Bootmem setup node 0 0000000000000000-000000003fff0000 NODE_DATA [0000000000011000 - 0000000000025fff] bootmap [0000000000026000 - 000000000002dfff] pages 8 (6 early reservations) ==> bootmem [0000000000 - 003fff0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000a2f0cc] TEXT DATA BSS ==> [0000200000 - 0000a2f0cc] #3 [0037ca2000 - 0037fef69b] RAMDISK ==> [0037ca2000 - 0037fef69b] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #5 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] found SMP MP-table at [ffff8800000f3c90] 000f3c90 [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0003fff0 On node 0 totalpages: 262015 DMA zone: 1729 pages, LIFO batch:0 DMA32 zone: 254504 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10de8201 base: 0xfeff0000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) PERCPU: Allocating 65184 bytes of per cpu data NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 256233 Policy zone: DMA32 Kernel command line: ro root=UUID=10478b20-cf81-46ef-ba24-e8f18190eb4d pci=nommconf Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 2209.965 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... No AGP bridge found Node 0: aperture @ c482000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 1021568k/1048512k available (3306k kernel code, 26492k reserved, 1837k data, 1296k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 4419.93 BogoMIPS (lpj=2209965) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using C1E aware idle routine ACPI: Core revision 20080609 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 Using local APIC timer interrupts. APIC timer calibration result 12556642 Detected 12.556 MHz APIC timer. Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4419.84 BogoMIPS (lpj=2209920) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 Brought up 2 CPUs Total of 2 processors activated (8839.77 BogoMIPS). sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=5904 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 net_namespace: 1552 bytes Booting paravirtualized kernel on bare hardware Time: 21:45:15 Date: 04/14/09 NET: Registered protocol family 16 No dock devices found. node 0 link 0: io port [8000, ffff] TOM: 0000000040000000 aka 1024M node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [40000000, efffffff] node 0 link 0: mmio [f4000000, fe02ffff] node 0 link 0: mmio [f0000000, f03fffff] bus: [00,04] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [40000000, f3ffffff] bus: 00 index 3 mmio: [f4000000, fcffffffff] ACPI: bus type pci registered PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: 0000:00:01.1 reg 10 io port: [fc00, fc3f] PCI: 0000:00:01.1 reg 20 io port: [1c00, 1c3f] PCI: 0000:00:01.1 reg 24 io port: [f400, f43f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled PCI: 0000:00:02.0 reg 10 32bit mmio: [fe02f000, fe02ffff] pci 0000:00:02.0: supports D1 pci 0000:00:02.0: supports D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled PCI: 0000:00:02.1 reg 10 32bit mmio: [fe02e000, fe02e0ff] pci 0000:00:02.1: supports D1 pci 0000:00:02.1: supports D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled PCI: 0000:00:05.0 reg 10 32bit mmio: [fe028000, fe02bfff] pci 0000:00:05.0: PME# supported from D3hot D3cold pci 0000:00:05.0: PME# disabled PCI: 0000:00:06.0 reg 20 io port: [f000, f00f] PCI: 0000:00:08.0 reg 10 io port: [9f0, 9f7] PCI: 0000:00:08.0 reg 14 io port: [bf0, bf3] PCI: 0000:00:08.0 reg 18 io port: [970, 977] PCI: 0000:00:08.0 reg 1c io port: [b70, b73] PCI: 0000:00:08.0 reg 20 io port: [dc00, dc0f] PCI: 0000:00:08.0 reg 24 32bit mmio: [fe02d000, fe02dfff] PCI: 0000:00:08.1 reg 10 io port: [9e0, 9e7] PCI: 0000:00:08.1 reg 14 io port: [be0, be3] PCI: 0000:00:08.1 reg 18 io port: [960, 967] PCI: 0000:00:08.1 reg 1c io port: [b60, b63] PCI: 0000:00:08.1 reg 20 io port: [c800, c80f] PCI: 0000:00:08.1 reg 24 32bit mmio: [fe02c000, fe02cfff] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:09.0: PME# disabled pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: PME# disabled PCI: 0000:01:09.0 reg 10 32bit mmio: [fdeff000, fdeff7ff] PCI: 0000:01:09.0 reg 14 32bit mmio: [fdef8000, fdefbfff] pci 0000:01:09.0: supports D1 pci 0000:01:09.0: supports D2 pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot pci 0000:01:09.0: PME# disabled pci 0000:00:04.0: transparent bridge PCI: bridge 0000:00:04.0 io port: [b000, bfff] PCI: bridge 0000:00:04.0 32bit mmio: [fde00000, fdefffff] PCI: bridge 0000:00:04.0 32bit mmio pref: [fdf00000, fdffffff] PCI: 0000:02:00.0 reg 10 32bit mmio: [fa000000, faffffff] PCI: 0000:02:00.0 reg 14 64bit mmio: [e0000000, efffffff] PCI: 0000:02:00.0 reg 1c 64bit mmio: [fb000000, fbffffff] PCI: 0000:02:00.0 reg 30 32bit mmio: [0, 1ffff] Pre-1.1 PCIe device detected, disable ASPM for 0000:00:09.0. It can be enabled forcedly with 'pcie_aspm=force' PCI: bridge 0000:00:09.0 io port: [a000, afff] PCI: bridge 0000:00:09.0 32bit mmio: [fa000000, fcffffff] PCI: bridge 0000:00:09.0 64bit mmio pref: [e0000000, efffffff] PCI: 0000:03:00.0 reg 10 64bit mmio: [fddfc000, fddfffff] PCI: 0000:03:00.0 reg 18 io port: [9c00, 9cff] PCI: 0000:03:00.0 reg 30 32bit mmio: [0, 1ffff] pci 0000:03:00.0: supports D1 pci 0000:03:00.0: supports D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled PCI: bridge 0000:00:0b.0 io port: [9000, 9fff] PCI: bridge 0000:00:0b.0 32bit mmio: [fdd00000, fddfffff] PCI: bridge 0000:00:0b.0 64bit mmio pref: [fdc00000, fdcfffff] PCI: bridge 0000:00:0c.0 io port: [8000, 8fff] PCI: bridge 0000:00:0c.0 32bit mmio: [fdb00000, fdbfffff] PCI: bridge 0000:00:0c.0 64bit mmio pref: [fda00000, fdafffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0 ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 tracer: 1286 pages allocated for 65536 entries of 80 bytes actual entries 65586 ACPI: RTC can wake from S4 system 00:01: ioport range 0x1000-0x107f has been reserved system 00:01: ioport range 0x1080-0x10ff has been reserved system 00:01: ioport range 0x1400-0x147f has been reserved system 00:01: ioport range 0x1480-0x14ff has been reserved system 00:01: ioport range 0x1800-0x187f has been reserved system 00:01: ioport range 0x1880-0x18ff has been reserved system 00:01: iomem range 0xfefe0000-0xfefe01ff could not be reserved system 00:01: iomem range 0xfefe1000-0xfefe10ff could not be reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x800-0x87f has been reserved system 00:02: ioport range 0x290-0x297 has been reserved system 00:0d: iomem range 0xf0000000-0xf3ffffff could not be reserved system 00:0e: iomem range 0xd0000-0xd3fff has been reserved system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved system 00:0e: iomem range 0xfc000-0xfffff could not be reserved system 00:0e: iomem range 0xfeff0000-0xfeff00ff could not be reserved system 00:0e: iomem range 0x3fff0000-0x3fffffff could not be reserved system 00:0e: iomem range 0xffff0000-0xffffffff could not be reserved system 00:0e: iomem range 0x0-0x9ffff could not be reserved system 00:0e: iomem range 0x100000-0x3ffeffff could not be reserved system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0e: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:0e: iomem range 0xfefff000-0xfeffffff could not be reserved system 00:0e: iomem range 0xfff80000-0xfff80fff could not be reserved system 00:0e: iomem range 0xfff90000-0xfffbffff could not be reserved system 00:0e: iomem range 0xfffed000-0xfffeffff could not be reserved pci 0000:00:04.0: PCI bridge, secondary bus 0000:01 pci 0000:00:04.0: IO window: 0xb000-0xbfff pci 0000:00:04.0: MEM window: 0xfde00000-0xfdefffff pci 0000:00:04.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 pci 0000:00:09.0: IO window: 0xa000-0xafff pci 0000:00:09.0: MEM window: 0xfa000000-0xfcffffff pci 0000:00:09.0: PREFETCH window: 0x000000e0000000-0x000000efffffff pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03 pci 0000:00:0b.0: IO window: 0x9000-0x9fff pci 0000:00:0b.0: MEM window: 0xfdd00000-0xfddfffff pci 0000:00:0b.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 pci 0000:00:0c.0: IO window: 0x8000-0x8fff pci 0000:00:0c.0: MEM window: 0xfdb00000-0xfdbfffff pci 0000:00:0c.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [b000, bfff] bus: 01 index 1 mmio: [fde00000, fdefffff] bus: 01 index 2 mmio: [fdf00000, fdffffff] bus: 01 index 3 io port: [0, ffff] bus: 01 index 4 mmio: [0, ffffffffffffffff] bus: 02 index 0 io port: [a000, afff] bus: 02 index 1 mmio: [fa000000, fcffffff] bus: 02 index 2 mmio: [e0000000, efffffff] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 io port: [9000, 9fff] bus: 03 index 1 mmio: [fdd00000, fddfffff] bus: 03 index 2 mmio: [fdc00000, fdcfffff] bus: 03 index 3 mmio: [0, 0] bus: 04 index 0 io port: [8000, 8fff] bus: 04 index 1 mmio: [fdb00000, fdbfffff] bus: 04 index 2 mmio: [fda00000, fdafffff] bus: 04 index 3 mmio: [0, 0] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 3381k freed audit: initializing netlink socket (disabled) type=2000 audit(1239745515.516:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 2001 SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:04.0: Enabling HT MSI Mapping pci 0000:00:05.0: Enabling HT MSI Mapping pci 0000:00:08.0: Enabling HT MSI Mapping pci 0000:00:08.1: Enabling HT MSI Mapping pci 0000:00:09.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Enabling HT MSI Mapping pci 0000:00:0c.0: Enabling HT MSI Mapping pci 0000:02:00.0: Boot video device pcieport-driver 0000:00:09.0: setting latency timer to 64 pcieport-driver 0000:00:09.0: found MSI capability pci_express 0000:00:09.0:pcie00: allocate port service pcieport-driver 0000:00:0b.0: setting latency timer to 64 pcieport-driver 0000:00:0b.0: found MSI capability pci_express 0000:00:0b.0:pcie00: allocate port service pcieport-driver 0000:00:0c.0: setting latency timer to 64 pcieport-driver 0000:00:0c.0: found MSI capability pci_express 0000:00:0c.0:pcie00: allocate port service pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button (CM) [PWRB] fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN] (on) processor ACPI0007:00: registered as cooling_device1 processor ACPI0007:01: registered as cooling_device2 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (40 C) hpet_resources: 0xfeff0000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 64 is not supported ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.21-170.2.56.fc10.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:02.1 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected usb 1-2: new high speed USB device using ehci_hcd and address 2 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.21-170.2.56.fc10.x86_64 ohci_hcd usb usb2: SerialNumber: 0000:00:02.0 USB Universal Host Controller Interface driver v3.0 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usb 1-2: configuration #1 chosen from 1 choice usb 1-2: New USB device found, idVendor=059f, idProduct=0651 usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-2: Product: LaCie Hard Drive USB usb 1-2: Manufacturer: LaCie usb 1-2: SerialNumber: 10000E000DB53178 usb 1-10: new high speed USB device using ehci_hcd and address 6 usb 1-10: configuration #1 chosen from 1 choice usb 1-10: New USB device found, idVendor=0bda, idProduct=0111 usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-10: Product: USB2.0-CRW usb 1-10: Manufacturer: Generic usb 1-10: SerialNumber: 20021111153705700 usb 2-3: new low speed USB device using ohci_hcd and address 2 usb 2-3: configuration #1 chosen from 1 choice usb 2-3: New USB device found, idVendor=04f2, idProduct=0111 usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-3: Product: USB Keyboard usb 2-3: Manufacturer: CHICONY usb 2-4: new low speed USB device using ohci_hcd and address 3 usb 2-4: configuration #1 chosen from 1 choice usb 2-4: New USB device found, idVendor=046d, idProduct=c016 usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-4: Product: Optical USB Mouse usb 2-4: Manufacturer: Logitech usb 2-9: new low speed USB device using ohci_hcd and address 4 usb 2-9: configuration #1 chosen from 1 choice usb 2-9: New USB device found, idVendor=147a, idProduct=e00d usb 2-9: New USB device strings: Mfr=2, Product=1, SerialNumber=0 usb 2-9: Product: IR Receiver usb 2-9: Manufacturer: Acer usbcore: registered new interface driver hiddev input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input4 input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:02.0-3 input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input5 input,hiddev96,hidraw1: USB HID v1.10 Device [CHICONY USB Keyboard] on usb-0000:00:02.0-3 input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input6 input,hidraw2: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:02.0-4 input: Acer IR Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/input/input7 input,hiddev97,hidraw3: USB HID v1.10 Keyboard [Acer IR Receiver] on usb-0000:00:02.0-9 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (8192 buckets, 32768 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 Magic number: 5:503:803 Freeing unused kernel memory: 1296k freed Write protecting the kernel read-only data: 4748k sata_nv 0000:00:08.0: version 3.5 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21 sata_nv 0000:00:08.0: setting latency timer to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: ST3250820AS, 3.AAD, max UDMA/133 ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 isa bounce pool size: 16 pages scsi 0:0:0:0: Direct-Access ATA ST3250820AS 3.AA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 > sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20 sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20 sata_nv 0000:00:08.1: setting latency timer to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20 pata_acpi 0000:00:06.0: setting latency timer to 64 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: 8192 avtab hash slots, 113427 rules. SELinux: 8192 avtab hash slots, 113427 rules. SELinux: 8 users, 11 roles, 2605 types, 121 bools, 1 sens, 1024 cats SELinux: 73 classes, 113427 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda3, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1239745520.916:2): policy loaded auid=4294967295 ses=4294967295 udevd version 127 started parport_pc 00:0b: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] input: PC Speaker as /devices/platform/pcspkr/input/input8 ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 sky2 0000:03:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16 sky2 0000:03:00.0: setting latency timer to 64 sky2 0000:03:00.0: v1.22 addr 0xfddfc000 irq 16 Yukon-2 EC Ultra rev 2 sky2 eth0: addr 00:16:ec:d4:b2:2e Floppy drive(s): fd0 is 1.44M Initializing USB Mass Storage driver... scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning scsi5 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 6 usb-storage: waiting for device to settle before scanning FDC 0 is a post-1991 82077 pata_amd 0000:00:06.0: version 0.3.10 pata_amd 0000:00:06.0: setting latency timer to 64 scsi6 : pata_amd scsi7 : pata_amd ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 ACPI: WMI: Mapper loaded acer-wmi: Acer Laptop ACPI-WMI Extras acer-wmi: No or unsupported WMI interface, unable to load ata5.01: ATAPI: LITE-ON DVDRW SHW-160P6S, PRS2, max UDMA/66 ata5: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc50000) ACPI=0x1f01f (600:30:0x1c) ata5.01: limited to UDMA/33 due to 40-wire cable ata5.01: configured for UDMA/33 ata6: port disabled. ignoring. scsi 6:0:1:0: CD-ROM LITE-ON DVDRW SHW-160P6S PRS2 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 6:0:1:0: Attached scsi CD-ROM sr0 sr 6:0:1:0: Attached scsi generic sg1 type 5 ppdev: user-space parallel port driver i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 firewire_ohci 0000:01:09.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 firewire_ohci 0000:01:09.0: setting latency timer to 64 firewire_ohci: Added fw-ohci device 0000:01:09.0, OHCI version 1.10 ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23 HDA Intel 0000:00:05.0: setting latency timer to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x1c firewire_core: created device fw0: GUID 00000ae6ff5e6477, S400 device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda6, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda7, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda9, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda8, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda5, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs type=1400 audit(1239745529.028:3): avc: denied { write } for pid=1586 comm="mount" path="/0" dev=devpts ino=2 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:devpts_t:s0 tclass=chr_file usb-storage: device scan complete scsi 4:0:0:0: Direct-Access SEAGATE ST3320820A 3.AA PQ: 0 ANSI: 2 usb-storage: device scan complete sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) scsi 5:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 53 00 00 08 sd 4:0:0:0: [sdb] Assuming drive cache: write through scsi 5:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 53 00 00 08 sd 4:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 4:0:0:0: [sdb] Attached SCSI disk sd 4:0:0:0: Attached scsi generic sg2 type 0 scsi 5:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS scsi 5:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS sd 5:0:0:0: [sdc] Attached SCSI removable disk sd 5:0:0:0: Attached scsi generic sg3 type 0 sd 5:0:0:1: [sdd] Attached SCSI removable disk sd 5:0:0:1: Attached scsi generic sg4 type 0 sd 5:0:0:2: [sde] Attached SCSI removable disk sd 5:0:0:2: Attached scsi generic sg5 type 0 sd 5:0:0:3: [sdf] Attached SCSI removable disk sd 5:0:0:3: Attached scsi generic sg6 type 0 Adding 2032212k swap on /dev/sda2. Priority:-1 extents:1 across:2032212k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0xe (2200 MHz), vid 0xe powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x10 powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team Clocksource tsc unstable (delta = -95850902 ns) RPC: Registered udp transport module. RPC: Registered tcp transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts sky2 eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16 pci 0000:02:00.0: PCI INT A -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16 pci 0000:02:00.0: setting latency timer to 64 [drm] Detected an NV44 generation card (0x046100a3) [drm] Initialized nouveau 0.0.11 20060213 on minor 0 [drm] Allocating FIFO number 0 [drm] nouveau_fifo_alloc: initialised FIFO 0 [drm] Allocating FIFO number 1 [drm] nouveau_fifo_alloc: initialised FIFO 1 eth0: no IPv6 routers present fuse init (API version 7.9) SELinux: initialized (dev fuse, type fuse), uses genfs_contexts SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts lspci -v ----------------------------------- 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) Subsystem: Elitegroup Computer Systems Device 2601 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) Subsystem: Elitegroup Computer Systems Device 2601 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) Subsystem: Elitegroup Computer Systems Device 2601 Flags: 66MHz, fast devsel, IRQ 5 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at f400 [size=64] Capabilities: Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) Subsystem: Elitegroup Computer Systems Device 2601 Flags: 66MHz, fast devsel 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Elitegroup Computer Systems Device 2601 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: Kernel driver in use: ohci_hcd 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Elitegroup Computer Systems Device 2601 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: Kernel driver in use: ehci_hcd 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: fdf00000-fdffffff Capabilities: 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) Subsystem: Elitegroup Computer Systems Device a88d Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe028000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: Device f019:2601 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] I/O ports at f000 [size=16] Capabilities: Kernel driver in use: pata_amd Kernel modules: pata_amd, pata_acpi, ata_generic 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Elitegroup Computer Systems Device 2601 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: Kernel driver in use: sata_nv Kernel modules: pata_acpi, sata_nv, ata_generic 00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Elitegroup Computer Systems Device 2601 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 I/O ports at 09e0 [size=8] I/O ports at 0be0 [size=4] I/O ports at 0960 [size=8] I/O ports at 0b60 [size=4] I/O ports at c800 [size=16] Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] Capabilities: Kernel driver in use: sata_nv Kernel modules: pata_acpi, sata_nv, ata_generic 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fa000000-fcffffff Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff Capabilities: Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fdd00000-fddfffff Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff Capabilities: Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fdb00000-fdbfffff Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff Capabilities: Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: Kernel driver in use: k8temp Kernel modules: k8temp 01:09.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI]) Subsystem: Elitegroup Computer Systems Device 8056 Flags: bus master, medium devsel, latency 64, IRQ 19 Memory at fdeff000 (32-bit, non-prefetchable) [size=2K] Memory at fdef8000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 02:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 LE] (rev a1) (prog-if 00 [VGA controller]) Subsystem: LeadTek Research Inc. Device da53 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fb000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at fc000000 [disabled] [size=128K] Capabilities: Kernel modules: nvidia, nvidiafb 03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12) Subsystem: Elitegroup Computer Systems Device 8056 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fddfc000 (64-bit, non-prefetchable) [size=16K] I/O ports at 9c00 [size=256] [virtual] Expansion ROM at fdc00000 [disabled] [size=128K] Capabilities: Kernel driver in use: sky2 Kernel modules: sky2