Linux version 2.6.30-rc2 (root@kedge) (gcc version 4.3.3 (Gentoo 4.3.3 p1.0, pie-10.1.5) ) #4 SMP PREEMPT Fri Apr 17 08:23:05 CEST 2009 Command line: root=/dev/sda3 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d800 (usable) BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bf6b0000 (usable) BIOS-e820: 00000000bf6b0000 - 00000000bf6cc000 (ACPI data) BIOS-e820: 00000000bf6cc000 - 00000000bf700000 (ACPI NVS) BIOS-e820: 00000000bf700000 - 00000000c0000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000013c000000 (usable) DMI present. last_pfn = 0x13c000 max_arch_pfn = 0x100000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0C0000000 mask FC0000000 uncachable 1 base 13C000000 mask FFC000000 uncachable 2 base 000000000 mask F00000000 write-back 3 base 100000000 mask FC0000000 write-back 4 base 0BF700000 mask FFFF00000 uncachable 5 base 0BF800000 mask FFF800000 uncachable 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 3GB, range: 1GB, type UC reg 1, base: 5056MB, range: 64MB, type UC reg 2, base: 0GB, range: 4GB, type WB reg 3, base: 4GB, range: 1GB, type WB reg 4, base: 3063MB, range: 1MB, type UC reg 5, base: 3064MB, range: 8MB, type UC total RAM coverred: 4023M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 3063MB, range: 1MB, type UC reg 3, base: 3064MB, range: 8MB, type UC reg 4, base: 4GB, range: 1GB, type WB reg 5, base: 5056MB, range: 64MB, type UC x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xbf6b0 max_arch_pfn = 0x100000000 init_memory_mapping: 0000000000000000-00000000bf6b0000 0000000000 - 00bf600000 page 2M 00bf600000 - 00bf6b0000 page 4k kernel direct mapping tables up to bf6b0000 @ 8000-d000 init_memory_mapping: 0000000100000000-000000013c000000 0100000000 - 013c000000 page 2M kernel direct mapping tables up to 13c000000 @ b000-11000 ACPI: RSDP 00000000000f68d0 00024 (v02 LENOVO) ACPI: XSDT 00000000bf6bb77f 00094 (v01 LENOVO TP-7L 00002210 LTP 00000000) ACPI: FACP 00000000bf6bb900 000F4 (v03 LENOVO TP-7L 00002210 LNVO 00000001) ACPI Warning (tbfadt-0531): 32/64X length mismatch in Gpe1Block: 0/32 [20090320] ACPI Warning (tbfadt-0562): Optional field Gpe1Block has zero address or length: 000000000000102C/0 [20090320] ACPI: DSDT 00000000bf6bbd1d 0FED1 (v01 LENOVO TP-7L 00002210 MSFT 03000000) ACPI: FACS 00000000bf6e4000 00040 ACPI: SSDT 00000000bf6bbab4 00269 (v01 LENOVO TP-7L 00002210 MSFT 03000000) ACPI: ECDT 00000000bf6cbbee 00052 (v01 LENOVO TP-7L 00002210 LNVO 00000001) ACPI: TCPA 00000000bf6cbc40 00032 (v02 LENOVO TP-7L 00002210 LNVO 00000001) ACPI: APIC 00000000bf6cbc72 00068 (v01 LENOVO TP-7L 00002210 LNVO 00000001) ACPI: MCFG 00000000bf6cbcda 0003C (v01 LENOVO TP-7L 00002210 LNVO 00000001) ACPI: HPET 00000000bf6cbd16 00038 (v01 LENOVO TP-7L 00002210 LNVO 00000001) ACPI: SLIC 00000000bf6cbdf0 00176 (v01 LENOVO TP-7L 00002210 LTP 00000000) ACPI: BOOT 00000000bf6cbf66 00028 (v01 LENOVO TP-7L 00002210 LTP 00000001) ACPI: ASF! 00000000bf6cbf8e 00072 (v16 LENOVO TP-7L 00002210 PTL 00000001) ACPI: SSDT 00000000bf6e26d9 0025F (v01 LENOVO TP-7L 00002210 INTL 20050513) ACPI: SSDT 00000000bf6e2938 000A6 (v01 LENOVO TP-7L 00002210 INTL 20050513) ACPI: SSDT 00000000bf6e29de 004F7 (v01 LENOVO TP-7L 00002210 INTL 20050513) ACPI: SSDT 00000000bf6e2ed5 001D8 (v01 LENOVO TP-7L 00002210 INTL 20050513) ACPI: DMI detected: Lenovo ThinkPad T61 ACPI: Added _OSI(Linux) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 013c000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 00009e4078] TEXT DATA BSS ==> [0000200000 - 00009e4078] #3 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000] #4 [00009e5000 - 00009e514c] BRK ==> [00009e5000 - 00009e514c] #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] #6 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] found SMP MP-table at [ffff8800000f6900] f6900 [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002c7fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0013c000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009d 0: 0x00000100 -> 0x000bf6b0 0: 0x00100000 -> 0x0013c000 On node 0 totalpages: 1029709 DMA zone: 56 pages used for memmap DMA zone: 2125 pages reserved DMA zone: 1816 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 765672 pages, LIFO batch:31 Normal zone: 3360 pages used for memmap Normal zone: 242400 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000bf6b0000 - 00000000bf6cc000 PM: Registered nosave memory: 00000000bf6cc000 - 00000000bf700000 PM: Registered nosave memory: 00000000bf700000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000 PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000 PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000 PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 Allocating PCI resources starting at c4000000 (gap: c0000000:30000000) NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages at ffff880028022000, static data 71776 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1009888 Kernel command line: root=/dev/sda3 Initializing CPU#0 NR_IRQS:320 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 2094.656 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 3965360k/5177344k available (5415k kernel code, 1058508k absent, 152552k reserved, 1523k data, 388k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.31 BogoMIPS (lpj=2094656) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K [ds] using Core 2/Atom configuration CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20090320 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4189.28 BogoMIPS (lpj=2094643) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K [ds] using Core 2/Atom configuration CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: Measured 346825 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to check_tsc_sync_source failed Brought up 2 CPUs Total of 2 processors activated (8378.59 BogoMIPS). net_namespace: 1816 bytes NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: MCFG area at f0000000 reserved in E820 PCI: Using MMCONFIG at f0000000 - f3ffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: EC description table is found, configuring boot EC ACPI: BIOS _OSI(Linux) query honored via DMI ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: Power Resource [PUBS] (on) ACPI: ACPI Dock Station Driver: 3 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xf8100000-0xf81fffff] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] pci 0000:00:02.1: reg 10 64bit mmio: [0xf8200000-0xf82fffff] pci 0000:00:19.0: reg 10 32bit mmio: [0xfe000000-0xfe01ffff] pci 0000:00:19.0: reg 14 32bit mmio: [0xfe025000-0xfe025fff] pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f] pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe226c00-0xfe226fff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe020000-0xfe023fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x18a0-0x18bf] pci 0000:00:1d.1: reg 20 io port: [0x18c0-0x18df] pci 0000:00:1d.2: reg 20 io port: [0x18e0-0x18ff] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe227000-0xfe2273ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x1c00-0x1c0f] pci 0000:00:1f.2: reg 10 io port: [0x1c50-0x1c57] pci 0000:00:1f.2: reg 14 io port: [0x1c44-0x1c47] pci 0000:00:1f.2: reg 18 io port: [0x1c48-0x1c4f] pci 0000:00:1f.2: reg 1c io port: [0x1c40-0x1c43] pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe226000-0xfe2267ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe227400-0xfe2274ff] pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.0: bridge 32bit mmio: [0xfc000000-0xfdffffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8000000-0xf80fffff] pci 0000:03:00.0: reg 10 64bit mmio: [0xdf3fe000-0xdf3fffff] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] pci 0000:00:1c.1: bridge 32bit mmio: [0xdc000000-0xdf3fffff] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xdfe00000-0xdfefffff] pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff] pci 0000:00:1c.2: bridge 32bit mmio: [0xd8000000-0xd9ffffff] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xdfb00000-0xdfbfffff] pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff] pci 0000:00:1c.3: bridge 32bit mmio: [0xd4000000-0xd5ffffff] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xdf800000-0xdf8fffff] pci 0000:00:1c.4: bridge io port: [0x6000-0x6fff] pci 0000:00:1c.4: bridge 32bit mmio: [0xd0000000-0xd1ffffff] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xdf500000-0xdf5fffff] pci 0000:15:00.0: reg 10 32bit mmio: [0xf8300000-0xf8300fff] pci 0000:15:00.0: supports D1 D2 pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.0: PME# disabled pci 0000:15:00.1: reg 10 32bit mmio: [0xf8301000-0xf83017ff] pci 0000:15:00.1: supports D1 D2 pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.1: PME# disabled pci 0000:15:00.2: reg 10 32bit mmio: [0xf8301800-0xf83018ff] pci 0000:15:00.2: supports D1 D2 pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.2: PME# disabled pci 0000:15:00.3: reg 10 32bit mmio: [0xf8301c00-0xf8301cff] pci 0000:15:00.3: supports D1 D2 pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.3: PME# disabled pci 0000:15:00.4: reg 10 32bit mmio: [0xf8302000-0xf83020ff] pci 0000:15:00.4: supports D1 D2 pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.4: PME# disabled pci 0000:15:00.5: reg 10 32bit mmio: [0xf8302400-0xf83024ff] pci 0000:15:00.5: supports D1 D2 pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.5: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x7000-0xafff] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8300000-0xfbffffff] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf4000000-0xf7ffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter cfg80211: Calling CRDA for country: US Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff has been reserved system 00:00: iomem range 0xc4000-0xc7fff has been reserved system 00:00: iomem range 0xc8000-0xcbfff has been reserved system 00:00: iomem range 0xcc000-0xcffff has been reserved system 00:00: iomem range 0xd0000-0xd3fff could not be reserved system 00:00: iomem range 0xe0000-0xe3fff could not be reserved system 00:00: iomem range 0xe4000-0xe7fff could not be reserved system 00:00: iomem range 0xe8000-0xebfff could not be reserved system 00:00: iomem range 0xec000-0xeffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0xbfffffff could not be reserved system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved system 00:02: ioport range 0x164e-0x164f has been reserved system 00:02: ioport range 0x1000-0x107f has been reserved system 00:02: ioport range 0x1180-0x11bf has been reserved system 00:02: ioport range 0x800-0x80f has been reserved system 00:02: ioport range 0x15e0-0x15ef has been reserved system 00:02: ioport range 0x1600-0x165f could not be reserved system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x2000-0x2fff pci 0000:00:1c.0: MEM window: 0xfc000000-0xfdffffff pci 0000:00:1c.0: PREFETCH window: 0x000000f8000000-0x000000f80fffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: 0x3000-0x3fff pci 0000:00:1c.1: MEM window: 0xdc000000-0xdf3fffff pci 0000:00:1c.1: PREFETCH window: 0x000000dfe00000-0x000000dfefffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.2: IO window: 0x4000-0x4fff pci 0000:00:1c.2: MEM window: 0xd8000000-0xd9ffffff pci 0000:00:1c.2: PREFETCH window: 0x000000dfb00000-0x000000dfbfffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.3: IO window: 0x5000-0x5fff pci 0000:00:1c.3: MEM window: 0xd4000000-0xd5ffffff pci 0000:00:1c.3: PREFETCH window: 0x000000df800000-0x000000df8fffff pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d pci 0000:00:1c.4: IO window: 0x6000-0x6fff pci 0000:00:1c.4: MEM window: 0xd0000000-0xd1ffffff pci 0000:00:1c.4: PREFETCH window: 0x000000df500000-0x000000df5fffff pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16 pci 0000:15:00.0: IO window: 0x007000-0x0070ff pci 0000:15:00.0: IO window: 0x007400-0x0074ff pci 0000:15:00.0: PREFETCH window: 0xf4000000-0xf7ffffff pci 0000:15:00.0: MEM window: 0xc4000000-0xc7ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15 pci 0000:00:1e.0: IO window: 0x7000-0xafff pci 0000:00:1e.0: MEM window: 0xf8300000-0xfbffffff pci 0000:00:1e.0: PREFETCH window: 0x000000f4000000-0x000000f7ffffff pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: enabling device (0005 -> 0007) pci 0000:00:1e.0: setting latency timer to 64 pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] pci_bus 0000:02: resource 1 mem: [0xfc000000-0xfdffffff] pci_bus 0000:02: resource 2 mem: [0xf8000000-0xf80fffff] pci_bus 0000:02: resource 3 mem: [0x0-0x0] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] pci_bus 0000:03: resource 1 mem: [0xdc000000-0xdf3fffff] pci_bus 0000:03: resource 2 mem: [0xdfe00000-0xdfefffff] pci_bus 0000:03: resource 3 mem: [0x0-0x0] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff] pci_bus 0000:04: resource 1 mem: [0xd8000000-0xd9ffffff] pci_bus 0000:04: resource 2 mem: [0xdfb00000-0xdfbfffff] pci_bus 0000:04: resource 3 mem: [0x0-0x0] pci_bus 0000:05: resource 0 io: [0x5000-0x5fff] pci_bus 0000:05: resource 1 mem: [0xd4000000-0xd5ffffff] pci_bus 0000:05: resource 2 mem: [0xdf800000-0xdf8fffff] pci_bus 0000:05: resource 3 mem: [0x0-0x0] pci_bus 0000:0d: resource 0 io: [0x6000-0x6fff] pci_bus 0000:0d: resource 1 mem: [0xd0000000-0xd1ffffff] pci_bus 0000:0d: resource 2 mem: [0xdf500000-0xdf5fffff] pci_bus 0000:0d: resource 3 mem: [0x0-0x0] pci_bus 0000:15: resource 0 io: [0x7000-0xafff] pci_bus 0000:15: resource 1 mem: [0xf8300000-0xfbffffff] pci_bus 0000:15: resource 2 mem: [0xf4000000-0xf7ffffff] pci_bus 0000:15: resource 3 io: [0x00-0xffff] pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:16: resource 0 io: [0x7000-0x70ff] pci_bus 0000:16: resource 1 io: [0x7400-0x74ff] pci_bus 0000:16: resource 2 mem: [0xf4000000-0xf7ffffff] pci_bus 0000:16: resource 3 mem: [0xc4000000-0xc7ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Simple Boot Flag at 0x35 set to 0x1 fuse init (API version 7.11) SGI XFS with security attributes, large block/inode numbers, no debug enabled msgmni has been set to 7746 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X pcieport-driver 0000:00:1c.4: setting latency timer to 64 ACPI: AC Adapter [AC] (on-line) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLPB] ACPI: SSDT 00000000bf6e1b32 002C4 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) ACPI: SSDT 00000000bf6e1e7b 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 00000000bf6e1a6a 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) ACPI: SSDT 00000000bf6e1df6 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (52 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [THM1] (42 C) Real Time Clock Driver v1.12b Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: power state changed by ACPI to D0 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 i915 0000:00:02.0: irq 29 for MSI/MSI-X ACPI: Battery Slot [BAT0] (battery present) allocated 1280x800 fb: 0x007df000, bo ffff88013a987780 [drm] LVDS-8: set mode 1280x800 f Console: switching to colour frame buffer device 160x50 fb0: inteldrmfb frame buffer device registered panic notifier acpi device:03: registered as cooling_device2 input: Video Bus as /class/input/input3 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 brd: module loaded loop: module loaded Linux video capture interface: v2.00 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:1f.2: irq 30 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 30 ata2: DUMMY ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 30 ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi3 : ata_piix scsi4 : ata_piix ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14 ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15 e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: irq 31 for MSI/MSI-X ata4.00: ATAPI: MATSHITADVD-RAM UJ-852, RB02, max UDMA/33 ata4.00: configured for UDMA/33 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:25:b8:d4:c3 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: 1008ff-0ff tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 ata3: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ATA-8: FUJITSU MHZ2160BH G1, 0084000A, max UDMA/100 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team input: AT Translated Set 2 keyboard as /class/input/input4 ata1.00: configured for UDMA/100 ata1: EH complete scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2160B 0084 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<6>TCP cubic registered NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-852 RB02 PQ: 0 ANSI: 5 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Bluetooth: L2CAP ver 2.13 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sr 3:0:0:0: Attached scsi generic sg1 type 5 ata5: port disabled. ignoring. Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 RPC: Registered udp transport module. RPC: Registered tcp transport module. sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk usb 3-2: new full speed USB device using uhci_hcd and address 2 Clocksource tsc unstable (delta = -430554817 ns) usb 3-2: configuration #1 chosen from 1 choice Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04791/0x300000 serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input5 usb 5-2: new full speed USB device using uhci_hcd and address 2 usb 5-2: configuration #1 chosen from 1 choice input: Logitech USB Receiver as /class/input/input6 generic-usb 0003:046D:C51A.0001: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0 input: Logitech USB Receiver as /class/input/input7 generic-usb 0003:046D:C51A.0002: input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1 input: PS/2 Generic Mouse as /class/input/input8 EXT3-fs: sda3: couldn't mount because of unsupported optional features (40). EXT2-fs: sda3: couldn't mount because of unsupported optional features (40). EXT4-fs: barriers enabled kjournald2 starting: pid 1499, dev sda3:8, commit interval 5 seconds EXT4-fs: Ignoring delalloc option - requested data journaling mode EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem sda3 with journalled data mode VFS: Mounted root (ext4 filesystem) readonly on device 8:3. Freeing unused kernel memory: 388k freed Write protecting the kernel read-only data: 6536k udev: starting version 141 udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly thinkpad_acpi: ThinkPad ACPI Extras v0.22 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 7LETC1WW (2.21 ), EC 7KHT24WW-1.08 thinkpad_acpi: Lenovo ThinkPad T61, model 64669MG thinkpad_acpi: ACPI backlight control delay disabled thinkpad_acpi: radio switch found; radios are disabled thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... Registered led device: tpacpi::thinklight Registered led device: tpacpi::power Registered led device: tpacpi::standby thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. input: ThinkPad Extra Buttons as /class/input/input9 HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 hda_intel: probe_mask set to 0x1 for device 17aa:20ac HDA Intel 0000:00:1b.0: setting latency timer to 64 iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:03:00.0: setting latency timer to 64 iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels iwlagn 0000:03:00.0: irq 32 for MSI/MSI-X phy0: Selected rate control algorithm 'iwl-agn-rs' EXT4 FS on sda3, internal journal on sda3:8 EXT4-fs: barriers enabled kjournald2 starting: pid 2359, dev sda5:8, commit interval 5 seconds EXT4-fs warning: maximal mount count reached, running e2fsck is recommended EXT4 FS on sda5, internal journal on sda5:8 EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem sda5 with ordered data mode REISERFS (device sda6): found reiserfs format "3.6" with standard journal REISERFS (device sda6): using ordered data mode REISERFS (device sda6): journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda6): checking transaction log (sda6) REISERFS (device sda6): Using r5 hash to sort names e1000e 0000:00:19.0: irq 31 for MSI/MSI-X e1000e 0000:00:19.0: irq 31 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode iwlagn 0000:03:00.0: loaded firmware version 228.57.2.23 iwlagn 0000:03:00.0: Radio disabled by HW RF Kill switch ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: Failed to config new BSSID to the low-level driver Adding 2008116k swap on /dev/sda2. Priority:-1 extents:1 across:2008116k e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present