(II) config/hal: initialized X.Org X Server 1.6.0 Release Date: 2009-2-25 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.29-rc8-r0bertz mips64 Current Operating System: Linux santon 2.6.30-rc3-r0bertz #14 PREEMPT Fri May 1 03:04:23 HKT 2009 mips64 Build Date: 20 March 2009 12:18:01PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 3 20:36:54 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Generic Monitor" (**) | |-->Device "card0" (**) Option "NoTrapSignals" (**) Option "AIGLX" "false" (==) Automatically adding devices (==) Automatically enabling devices (==) FontPath set to: built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Loader magic: 0x1f90 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (--) using VT number 8 (--) PCI:*(0@0:8:0) Silicon Motion, Inc. SM712 LynxEM+ rev 176, Mem @ 0x50000000/16777216 (II) No APM support in BIOS or kernel (II) System resource ranges: (WW) "glx" will not be loaded unless you've specified it to be loaded elsewhere. (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere. (II) "extmod" will be loaded by default. (II) "dbe" will be loaded by default. (II) "glx" will be loaded even though the default is to disable it. (II) "dri" will be loaded even though the default is to disable it. (II) "dri2" will be loaded by default. (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.0, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) LoadModule: "exa" (II) Loading /usr/lib/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.6.0, module version = 2.4.0 ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules//libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.2.1 ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.1.0 ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "siliconmotion" (II) Loading /usr/lib/xorg/modules/drivers//siliconmotion_drv.so (II) Module siliconmotion: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.7.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) SMI: driver (version 1.7.0) for Silicon Motion Lynx chipsets: Lynx, LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM, Cougar3DR, MSOC (WW) xf86EnableIOPorts: map iobase (2b3b4000) (II) Primary Device is: PCI 00@00:08:0 (WW) Falling back to old probe method for siliconmotion (--) Chipset LynxEM+ found (II) resource ranges after xf86ClaimFixedResources() call: (II) resource ranges after probing: (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Reloading /usr/lib/xorg/modules//libvgahw.so SMI_PreInit vgaCRIndex=4, vgaIOBase=0, MMIOBase=(nil) (==) SMI(0): Depth 24, (--) framebuffer bpp 32 (==) SMI(0): RGB weight 888 (==) SMI(0): Default visual is TrueColor (**) SMI(0): Option "HWCursor" "false" (**) SMI(0): Option "UseBIOS" "false" (**) SMI(0): Option "PanelSize" "1024x600" (==) SMI(0): PCI Burst enabled (==) SMI(0): PCI Retry enabled (**) SMI(0): Using Software Cursor (**) SMI(0): Option: UseBIOS disabled. (--) SMI(0): Chipset: "LynxEM+" (==) SMI(0): Dual head disabled (==) SMI(0): Using XAA acceleration architecture (II) SMI(0): Physical MMIO at 0x50400000 (II) SMI(0): Logical MMIO at 0x2b3d4000 - 0x2b7d3fff (II) SMI(0): DPR=0x2b3dc000, VPR=0x2b3e0000, IOBase=0x2b6d4000 (II) SMI(0): DataPort=0x2b3d4000 - 0x2b3dbfff (--) SMI(0): videoram: 2048kB (II) SMI(0): Physical frame buffer at 0x50000000 offset: 0x00000000 (II) SMI(0): Logical frame buffer at 0x2b7d4000 - 0x2b9d3fff (II) SMI(0): Cursor Offset: 001FFC00 (II) SMI(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) SMI(0): Reserved: 001FF800 (II) SMI(0): OFF Panel Size = 1024x600 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) SMI(0): I2C bus "I2C bus" initialized. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (==) SMI(0): Using gamma correction (1.0, 1.0, 1.0) (II) SMI(0): MCLK = 157.000 (II) SMI(0): Output LVDS using monitor section Generic Monitor (II) SMI(0): Output LVDS connected (II) SMI(0): Using user preference for initial modes (II) SMI(0): Output LVDS using initial mode 1024x600 (==) SMI(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Reloading /usr/lib/xorg/modules//libfb.so (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Reloading /usr/lib/xorg/modules//libxaa.so (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: (II) SMI(0): Physical MMIO at 0x50400000 (II) SMI(0): Logical MMIO at 0x2b3d4000 - 0x2b7d3fff (II) SMI(0): DPR=0x2b3dc000, VPR=0x2b3e0000, IOBase=0x2b6d4000 (II) SMI(0): DataPort=0x2b3d4000 - 0x2b3dbfff (II) SMI(0): Physical frame buffer at 0x50000000 offset: 0x00000000 (II) SMI(0): Logical frame buffer at 0x2b7d4000 - 0x2b9d3fff (II) SMI(0): Cursor Offset: 001FFC00 (II) SMI(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) SMI(0): Reserved: 001FF800 (II) SMI(0): Saved current video mode. Register dump: (II) SMI(0): START register dump ------------------ MISCELLANEOUS OUTPUT 6F SEQUENCER x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 00| 03 01 0F 00 0E 22 22 22 22 22 22 22 22 22 22 22 10| C8 40 14 60 00 0A 17 20 51 00 01 00 00 00 00 00 20| 54 30 32 00 01 00 00 00 00 00 00 00 00 00 00 00 30| 22 01 24 09 80 22 22 22 22 22 22 22 00 00 03 FF 40| 00 FC 00 00 20 18 00 FC 20 0C 44 20 00 22 22 22 50| 06 68 A7 7F 83 24 FF 03 00 60 59 22 22 00 00 22 60| 01 80 3E 1A 1A 00 20 00 54 03 FC 17 9A 2D 09 02 70| 04 45 3F 30 40 20 22 22 22 22 22 22 22 22 22 22 80| FF 07 00 FF FF FF FF 22 F7 00 00 00 FF FF 22 22 90| 00 00 00 00 22 22 22 22 22 22 22 22 22 22 22 22 A0| 00 FB 9F 01 00 ED ED ED 7B FB FF FF 97 EF BF DF CRT CONTROLLER x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 00| 9F 7F 7F 00 86 12 6E F0 00 60 00 00 00 00 00 00 10| 5B 25 57 40 00 57 00 C3 FF 00 00 00 00 00 00 00 30| 00 00 00 00 00 80 02 20 00 00 00 40 00 FF BF FF 40| 9F 7F 00 86 12 6E 57 00 5B 05 E0 60 7F 57 00 00 90| 55 D9 5D E1 86 1B 8E 26 DA 8D DE 94 00 00 18 00 A0| 03 03 03 03 03 03 15 03 00 00 00 00 00 00 GRAPHICS CONTROLLER x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 00| 00 00 00 00 00 40 05 0F FF ATTRIBUTE 0CONTROLLER x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 00| 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10| 41 00 0F 00 00 DPR x0 x4 x8 xC 00| C000C000 F024F004 F006C00D 004801CC 10| F400F400 FFD9D9D9 FF262626 C0E5F000 20| FFD9D9D9 FFFFFFFF FFFFFFFF F000C000 30| F400F400 00000000 00000000 F400F400 40| FFF00000 FFF00000 VPR x0 x4 x8 xC 00| 00030000 0000001F 00000000 00000000 10| 02000200 03FF07FF 07FF07FF 0007FFFF 20| 03FF03FF 00000000 07FF07FF 07FF07FF 30| 0007FFFF 03FF03FF 00000000 00000000 40| 00000000 00000000 00000000 00000000 50| 00000000 07216543 00000444 00EDEDED 60| 0000008A CPR x0 x4 x8 xC 00| 00000008 03FF03FF 07FF07FF 0007FFFF 10| 0007FFFF 000003FF 00000006 (II) SMI(0): END register dump -------------------- (II) SMI(0): FrameBuffer Box: 0,0 - 1024,511 (II) SMI(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles 8x8 color pattern filled rectangles CPU to Screen color expansion Solid Horizontal and Vertical Lines (II) SMI(0): Done writing mode. Register dump: (II) SMI(0): START register dump ------------------ MISCELLANEOUS OUTPUT 6F SEQUENCER x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 00| 03 01 0F 00 0E 22 22 22 22 22 22 22 22 22 22 22 10| C8 40 14 60 00 0A 17 20 51 00 00 00 00 00 00 00 20| 54 30 32 00 01 00 00 00 00 00 00 00 00 00 00 00 30| 22 01 24 09 80 22 22 22 22 22 22 22 00 00 03 FF 40| 00 FC 00 00 20 18 00 FC 20 0C 44 20 00 22 22 22 50| 06 68 A7 7F 83 24 FF 03 00 60 59 22 22 00 00 22 60| 01 80 3E 1A 1A 00 20 00 54 03 FC 17 9A 2D 09 02 70| 04 45 3F 30 40 20 22 22 22 22 22 22 22 22 22 22 80| FF 07 00 FF FF FF FF 22 F7 00 00 00 FF FF 22 22 90| 00 00 00 00 22 22 22 22 22 22 22 22 22 22 22 22 A0| 00 FB 9F 01 00 ED ED ED 7B FB FF FF 97 EF BF DF CRT CONTROLLER x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 00| 9F 7F 7F 00 86 12 6E F0 00 60 00 00 00 00 00 00 10| 5B 25 57 40 00 57 00 C3 FF 00 00 00 00 00 00 00 30| 00 00 00 00 00 80 02 20 00 00 00 40 00 FF BF FF 40| 9F 7F 00 86 12 6E 57 00 5B 05 E0 60 7F 57 00 00 90| 55 D9 5D E1 86 1B 8E 26 DA 8D DE 94 00 00 18 00 A0| 03 03 03 03 03 03 15 03 00 00 00 00 00 00 GRAPHICS CONTROLLER x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 00| 00 00 00 00 00 40 05 0F FF ATTRIBUTE 0CONTROLLER x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 00| 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10| 41 00 0F 00 00 DPR x0 x4 x8 xC 00| C000C000 F024F004 F006C00D 004801CC 10| F400F400 FFD9D9D9 FF262626 C0E5F000 20| FFD9D9D9 FFFFFFFF FFFFFFFF F000C000 30| F400F400 00000000 00000000 F400F400 40| FFF00000 FFF00000 VPR x0 x4 x8 xC 00| 00030000 0000001F 00000000 00000000 10| 02000200 03FF07FF 07FF07FF 0007FFFF 20| 03FF03FF 00000000 07FF07FF 07FF07FF 30| 0007FFFF 03FF03FF 00000000 00000000 40| 00000000 00000000 00000000 00000000 50| 00000000 07216543 00000444 00EDEDED 60| 000000A4 CPR x0 x4 x8 xC 00| 00000008 03FF03FF 07FF07FF 0007FFFF 10| 0007FFFF 000003FF 00000006 (II) SMI(0): END register dump -------------------- (**) Option "dpms" "false" (II) SMI(0): I2C device "I2C bus:SAA 7111A" registered at address 0x48. (II) SMI(0): I2C device "I2C bus:SAA 7111A" removed. (II) SMI(0): RandR 1.2 enabled, ignore the following RandR disabled message. (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) SMI(0): Setting screen physical size to 270 x 158 (II) config/hal: Adding input device ImExPS/2 Generic Explorer Mouse (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.0, module version = 2.2.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) ImExPS/2 Generic Explorer Mouse: always reports core events (**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event2" (II) ImExPS/2 Generic Explorer Mouse: Found 5 mouse buttons (II) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes (II) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s) (II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse (**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5 (**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE) (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1 (**) ImExPS/2 Generic Explorer Mouse: (accel) filter chain progression: 2.00 (**) ImExPS/2 Generic Explorer Mouse: (accel) filter stage 0: 20.00 ms (**) ImExPS/2 Generic Explorer Mouse: (accel) set acceleration profile 0 (II) config/hal: no driver specified for device /org/freedesktop/Hal/devices/usb_device_64e_a114_CN0317_S30C_MC03_VS_B20081113_if0_logicaldev_input (II) config/hal: Adding input device AT Translated Set 2 keyboard (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us"